Remove mmap callback as ASoC AMD drivers just call
the standard mmap handler.
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Reviewed-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20220721062043.3016985-2-venkataprasad.potturu@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This isn't used and doesn't need to be in the private data struct.
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20220708160244.21933-3-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Using obj-$() := instead of obj-$() += leads to the latter assignment
overwriting earlier value. Fix this by using incremental assignment to
add additional objects to build.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220720125115.1785426-1-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for mt8186 board with mt6366, rt1019 and rt5682s.
Signed-off-by: Jiaxin Yu <jiaxin.yu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220718162204.26238-8-jiaxin.yu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for mt8186 board with mt6366, da7219 and max98357.
Signed-off-by: Jiaxin Yu <jiaxin.yu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220718162204.26238-6-jiaxin.yu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add mt8186-mt6366 common driver for mt8186 series machine.
Signed-off-by: Jiaxin Yu <jiaxin.yu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220718162204.26238-4-jiaxin.yu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add mt8186 platform and affiliated driver.
Signed-off-by: Jiaxin Yu <jiaxin.yu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220718162204.26238-3-jiaxin.yu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
Set of updates for IPC3, IPC4, MTL support and cleanups for the
topology filename override which was broken for HDaudio platforms.
The remove() operation unconditionally frees the interrupt for the device
but we may not actually have an interrupt so there might be nothing to
free. Since the interrupt is requested after all other resources we don't
need the explicit free anyway, unwinding is guaranteed to be safe, so just
delete the remove() function and let devm take care of things.
Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Tested-by: Zheyu Ma <zheyuma97@gmail.com>
Link: https://lore.kernel.org/r/20220718140405.57233-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
On a number of platforms that contain acp3x controller a new ERR level
message is showing up:
`acp6x pci device not found`
This is because ACP3x and ACP6x share same PCI ID but can be identified
by PCI revision. As this is expected behavior for a system with ACP3x
decrease message to debug.
Fixes: b1630fcbfd ("ASoC: amd: yc: add new YC platform varaint support")
Cc: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20220718213402.19497-1-mario.limonciello@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add new widget to control system clock for power saving.
Signed-off-by: Wallace Lin <savagecin0@gmail.com>
Signed-off-by: Wallace Lin <sjlin0@nuvoton.com>
Link: https://lore.kernel.org/r/20220719084047.11572-1-savagecin@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The functions related to SOF can be reused in different machine drivers,
such as mt8195 or mt8186, so extract the common code to avoid duplication.
Set mtk_soc_card_data which include machine private data and SOF private
data as card drvdata, then the difference between machine private can be
ignored such as mt8195_mt6359_priv or mt8186_mt6366_priv, at the same
time the SOF related code can be reused in different machine drivers.
Signed-off-by: Chunxu Li <chunxu.li@mediatek.com>
Link: https://lore.kernel.org/r/20220715085903.7796-1-chunxu.li@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We should be consistent and always test that the DMA buffer is
allocated before continuing with the hw_params setup.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220715145216.277003-12-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
assign/free are not well aligned to usual conventions and specifically
not to the compressed ops that make use of the probe callbacks.
Use the more common startup/shutdown. No functional change beyond
renaming.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220715145216.277003-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We do all kinds of renaming tricks that get in the way of kernel
parameter and DMI quirk overrides at a higher level.
Tested on UpExtreme board with
options snd-sof-pci tplg_filename=sof-hda-generic.tplg
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220715145216.277003-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The fw_filename is now set at a higher level and can be overridden by
kernel parameters or DMI quirks.
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220715145216.277003-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
fixup_tplg_name() doesn't need to keep the string, allocated for
filename - it's temporary.
Inspired by similar change for hda:
commit b9088535e1 ("ASoC: SOF: Intel: HDA: don't keep a temporary variable")
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220715145216.277003-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Print out the found extended manifest magic number in case it is not
matching with the expected one (0x6e614d58) in debug level.
It is fairly unlikely that the firmware does not have ext_man section and
the found value in place of the magic number can help rootcausing boot
related issues.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220715145216.277003-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently the domain bit in ipc msg for module initialization is
set to lp (low power) mode for pipeline. This is not correct since
it is for module domain type: ll domain or dp domain which are for
scheduler in fw. If the domain bit is set to 1 fw will process the
module in dp domain or deal it with ll domain. So set domain bit
based on dp domain setting.
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220715145216.277003-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
SRC module only needs two parameters : base module config
and sink rate. This patch adds prepare and setup for SRC
widgets.
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220715145216.277003-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Dsp converts pcm rate to the one defined by dai. When SRC
is used, the pcm runtime rate is different with dai rate
and we need to fix it up for BE components.
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220715145216.277003-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The existing code allocate/release instance_id in widget ipc_prepare/
ipc_unprepare callbacks and creating widget with the instance_id in
tplg widget_setup callback. In the case of multiple widgets connecting
to one widget, the ipc_unprepare will be invoked for all the widgets
in the path including the widget which is still in use.
As a result, the instance_id is released in the ipc_unprepare callback,
but the widget is still in use and the instance_id will be reused by
a new widget when we start the PCM again.
Moving the ida work from ipc_prepare/ipc_unprepare to widget_setup/free
can avoid such problem.
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220715145216.277003-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Drop redundant CPA bit check after polling the same condition.
Fixes: 064520e8ae ("ASoC: SOF: Intel: Add support for MeteorLake (MTL)")
Reviewed-by: Chao Song <chao.song@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220715145216.277003-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
This device exposes a headset codec on link0 and an amplifier on
link3. This is a very unusual pin-muxing, usually the microphones are
pin-muxed with link2/link3. This resulted in a problematic error
handling leading to a kernel oops, and invalidated a hard-coded
assumption.
Full support for this device requires a DMI quirk shared separately
("soundwire: dmi-quirks: add remapping for HP Omen 16-k0005TX").
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:
Address the warning: "Codec: dpcm_be_connect: FE is nonatomic but BE is
not, forcing BE as nonatomic" by marking BE DAI as nonatomic. Aligns
with what is already done for FE DAIs.
This patchset iterates the change over all HSW and BDW related machine
board drivers.
Merge series from Stefan Binding <sbinding@opensource.cirrus.com>:
CS35L41 has a DSP which is able to run firmware, as well as a tuning file.
Different systems may want to use different firmwares and tuning files, and
some firmwares/tunings may not be compatible with other systems.
To allow a system to select the correct fimware/tuning, we can read an _SUB
from the ACPI. This _SUB can then be used to uniquely identify the system
in the firmware/tuning file name.
Add a helper function which reads the _SUB, so this can be used by other
parts in the future.
Add support inside the CS35L41 ASoC driver to read this _SUB, and save it
appropriately.
When PCH-attached DMICs are used on a SoundWire-based platform, all
known devices pin-mux SoundWire link2 and link3 with DMIC, and only
use link0 and link1 for SoundWire.
The HP Omen16 is the first exception to the rule, with SoundWire using
link0 and link3. Rather than using a fixed mask, let's count the
number of SoundWire links used.
BugLink: https://github.com/thesofproject/sof/issues/5966
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220715144144.274770-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
While tinkering with ACPI work-arounds for the HP Omen 16 support, we
identified a corner case where the headset codec device properties are
not set in the codec .init when -EPROBE_DEFER is returned, but
released unconditionally in the .exit().
This leads to a kernel oops
[ 4.186891] sof_sdw sof_sdw: snd_soc_register_card failed -517
[ 4.186896] BUG: kernel NULL pointer dereference, address: 00000000000003f0
[ 4.186914] Oops: 0000 [#1] PREEMPT SMP NOPTI
[ 4.186926] RIP: 0010:dev_fwnode+0x5/0x20
[ 4.186974] device_remove_software_node+0x10/0x80
[ 4.186982] sof_sdw_rt711_exit+0x19/0x30 [snd_soc_sof_sdw]
[ 4.186990] mc_dailink_exit_loop+0x94/0xc0 [snd_soc_sof_sdw]
[ 4.186996] ? rt711_rtd_init+0x170/0x170 [snd_soc_sof_sdw]
A similar error case can occur if the addition of the device property
fails. We need to test if the property was successfully added before
removing it.
BugLink: https://github.com/thesofproject/linux/issues/3727
Fixes: 768ad6d80d ("ASoC: Intel: sof_sdw: handle errors on card registration")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220715144144.274770-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Address the warning: "Codec: dpcm_be_connect: FE is nonatomic but BE is
not, forcing BE as nonatomic" by marking BE DAI as nonatomic. Aligns
with what is already done for FE ones.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220624134317.3656128-5-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Address the warning: "Codec: dpcm_be_connect: FE is nonatomic but BE is
not, forcing BE as nonatomic" by marking BE DAI as nonatomic. Aligns
with what is already done for FE ones.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220624134317.3656128-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Address the warning: "Codec: dpcm_be_connect: FE is nonatomic but BE is
not, forcing BE as nonatomic" by marking BE DAI as nonatomic. Aligns
with what is already done for FE DAIs.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220624134317.3656128-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Address the warning: "Codec: dpcm_be_connect: FE is nonatomic but BE is
not, forcing BE as nonatomic" by marking BE DAI as nonatomic. Aligns
with what is already done for FE DAIs.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220624134317.3656128-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When loading firmware, wm_adsp uses a number of parameters to
determine the path of the firmware and tuning files to load.
One of these parameters is system_name.
Add support in cs35l41 to read this system name from the ACPI
_SUB ID in order to uniquely identify the firmware and tuning
mapped to a particular system.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220707151037.3901050-3-sbinding@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Before, ssiu.c didn't care SSI5-8, thus,
commit b1384d4c95 ("ASoC: rsnd: care default case on
rsnd_ssiu_busif_err_status_clear()") cares it for status clear.
But we should care it for error irq handling, too.
This patch cares it.
Reported-by: Nguyen Bao Nguyen <nguyen.nguyen.yj@renesas.com>
Reported-by: Nishiyama Kunihiko <kunihiko.nishiyama.dn@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/871quocio1.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There are two bugs that have to do with when we copy the payload:
size = simple_write_to_buffer(ipc4_msg->data_ptr,
priv->max_msg_size, ppos, buffer,
count);
The value of "*ppos" was supposed to be zero but it is
sizeof(ipc4_msg->header_u64) so it will copy the data into the middle of
the "ipc4_msg->data_ptr" buffer instead of to the start. The second
problem is "buffer" should be "buffer + sizeof(ipc4_msg->header_u64)".
This function is used for fuzz testing so the data is normally random
and this bug likely does not affect anyone very much.
In this context, it's simpler and more appropriate to use copy_from_user()
instead of simple_write_to_buffer() so I have re-written the function.
Fixes: 066c67624d ("ASoC: SOF: ipc-msg-injector: Add support for IPC4 messages")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/Ysg1tB2FKLnRMsel@kili
Signed-off-by: Mark Brown <broonie@kernel.org>
For IPC4, we need to set pipeline state in BE DAI trigger.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220708061312.25878-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In mt6359_parse_dt() and mt6359_accdet_parse_dt(), we should call
of_node_put() for the reference returned by of_get_child_by_name()
which has increased the refcount.
Fixes: 6835302853 ("ASoC: mt6359: fix failed to parse DT properties")
Fixes: eef07b9e09 ("ASoC: mediatek: mt6359: add MT6359 accdet jack driver")
Signed-off-by: Liang He <windhl@126.com>
Link: https://lore.kernel.org/r/20220713102013.367336-1-windhl@126.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since SND_SOC_ES8316 has a hard dependency on I2C and since 'select'
does not follow any dependency chains, SND_SOC_AMD_ST_ES8336_MACH
also needs to have a hard dependency on I2C.
Fixes a kconfig warning and subsequent build errors:
WARNING: unmet direct dependencies detected for SND_SOC_ES8316
Depends on [n]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && I2C [=n]
Selected by [y]:
- SND_SOC_AMD_ST_ES8336_MACH [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SND_SOC_AMD_ACP [=y] && ACPI [=y] && (I2C [=n] || COMPILE_TEST [=y])
sound/soc/codecs/es8316.c:866:1: warning: data definition has no type or storage class
866 | module_i2c_driver(es8316_i2c_driver);
sound/soc/codecs/es8316.c:866:1: error: type defaults to ‘int’ in declaration of ‘module_i2c_driver’ [-Werror=implicit-int]
sound/soc/codecs/es8316.c:866:1: warning: parameter names (without types) in function declaration
sound/soc/codecs/es8316.c:857:26: warning: ‘es8316_i2c_driver’ defined but not used [-Wunused-variable]
857 | static struct i2c_driver es8316_i2c_driver = {
Fixes: f94fa84058 ("ASoC: amd: enable machine driver build for Jadeite platform")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: alsa-devel@alsa-project.org
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Link: https://lore.kernel.org/r/20220712183348.31046-1-rdunlap@infradead.org
Signed-off-by: Mark Brown <broonie@kernel.org>
We should call of_node_put() for the reference before its replacement
as it returned by of_get_parent() which has increased the refcount.
Besides, we should also call of_node_put() before return.
Fixes: c8c74939f7 ("ASoC: audio-graph-card2: add Multi CPU/Codec support")
Signed-off-by: Liang He <windhl@126.com>
Link: https://lore.kernel.org/r/20220713071200.366729-1-windhl@126.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The "gpio_pa" pointer is an error pointer, there is no need to try
put it. Calling gpiod_put() on it will lead to an error pointer
dereference.
Fixes: 02527c3f23 ("ASoC: amd: add Machine driver for Jadeite platform")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/Ys2IRPHWGIwuVs21@kili
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
The FSR (Firmware State Register) holds the ROM state information, it does not
contain error information.
The FSR itself is a bit more complicated as well as the state depends on the
module currently in use.
The error code from ROM or the status code from the firmware is located at the
next register.
Fix the handling of the FSR in order to provide usable and human readable (in
most cases) report on the status and error.
