In 'ieee80211_beacon_get_ap()', free allocated skb in case of error
returned by 'ieee80211_beacon_protect()'. Compile tested only.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Link: https://patch.msgid.link/20240805142035.227847-1-dmantipov@yandex.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There is a WARNING in iwl_trans_wait_tx_queues_empty() (that was
recently converted from just a message), that can be hit if we
wait for TX queues to become empty after firmware died. Clearly,
we can't expect anything from the firmware after it's declared dead.
Don't call iwl_trans_wait_tx_queues_empty() in this case. While it could
be a good idea to stop the flow earlier, the flush functions do some
maintenance work that is not related to the firmware, so keep that part
of the code running even when the firmware is not running.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240825191257.a7cbd794cee9.I44a739fbd4ffcc46b83844dd1c7b2eb0c7b270f6@changeid
[edit commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
MLO internal scan may include 6 GHz channels. Since the 6 GHz scan
indication is not set, the channel flags are set incorrectly, which
leads to a firmware assert.
Since the MLO scan may include 6 GHz and non 6 GHz channels in one
request, add support for non-PSC 6 GHz channels (PSC channels are
already supported) when the 6 GHz indication is not set.
Fixes: 38b3998dfb ("wifi: iwlwifi: mvm: Introduce internal MLO passive scan")
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240825191257.04807f8213b2.Idd09d4366df92a74853649c1a520b7f0f752d1ac@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Not doing so will make us send a host command to the transport while the
firmware is not alive, which will trigger a WARNING.
bad state = 0
WARNING: CPU: 2 PID: 17434 at drivers/net/wireless/intel/iwlwifi/iwl-trans.c:115 iwl_trans_send_cmd+0x1cb/0x1e0 [iwlwifi]
RIP: 0010:iwl_trans_send_cmd+0x1cb/0x1e0 [iwlwifi]
Call Trace:
<TASK>
iwl_mvm_send_cmd+0x40/0xc0 [iwlmvm]
iwl_mvm_config_scan+0x198/0x260 [iwlmvm]
iwl_mvm_recalc_tcm+0x730/0x11d0 [iwlmvm]
iwl_mvm_tcm_work+0x1d/0x30 [iwlmvm]
process_one_work+0x29e/0x640
worker_thread+0x2df/0x690
? rescuer_thread+0x540/0x540
kthread+0x192/0x1e0
? set_kthread_struct+0x90/0x90
ret_from_fork+0x22/0x30
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240825191257.5abe71ca1b6b.I97a968cb8be1f24f94652d9b110ecbf6af73f89e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Check size of WGDS revision 3 is equal to 8 entries size with some header,
but doesn't depend on the number of used entries. Check that used entries
are between min and max but allow more to be present than are used to fix
operation with some BIOSes that have such data.
Fixes: 97f8a3d161 ("iwlwifi: ACPI: support revision 3 WGDS tables")
Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240825191257.cc71dfc67ec3.Ic27ee15ac6128b275c210b6de88f2145bd83ca7b@changeid
[edit commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
iwl_mvm_select_links is called by the link selection worker and it
requires the mutex.
Take it in the link selection worker.
This logic used to run from iwl_mvm_rx_umac_scan_complete_notif which
had the mvm->mutex held. This was changed to run in a worker holding the
wiphy mutex, but we also need the mvm->mutex.
Fixes: 2e194efa38 ("wifi: iwlwifi: mvm: Fix race in scan completion")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240825191257.0cacecd5db1e.Iaca38a078592b69bdd06549daf63408ccf1810e4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The calculation should consider also the 6GHz IE's len, fix that.
In addition, in iwl_mvm_sched_scan_start() the scan_fits helper is
called only in case non_psc_incldued is true, but it should be called
regardless, fix that as well.
Signed-off-by: Daniel Gabay <daniel.gabay@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240825191257.7db825442fd2.I99f4d6587709de02072fd57957ec7472331c6b1d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fast resume is a feature that was recently introduced to speed up the
resume time. It basically keeps the firmware alive while the system
is suspended and that avoids starting again the whole device.
This flow can't work for hibernation, since when the system boots,
before the frozen image is loaded, the kernel may touch the device. As a
result, we can't assume the device is in the exact same state as before
the hibernation.
Detect that we are resuming from hibernation through the PCI device and
forbid the fast resume flow. We also need to shut down the device
cleanly when that happens.
In addition, in case the device is power gated during S3, we won't be
able to keep the device alive. Detect this situation with BE200 at least
with the help of the CSR_FUNC_SCRATCH register and reset the device upon
resume if it was power gated during S3.
Fixes: e8bb19c1d5 ("wifi: iwlwifi: support fast resume")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240825191257.24eb3b19e74f.I3837810318dbef0a0a773cf4c4fcf89cdc6fdbd3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If ParaVirt steal time feature is enabled, there is a percpu gpa address
passed from guest vCPU and host modifies guest memory space with this gpa
address. When vCPU is reset normally, it will notify host and invalidate
gpa address.
However if VM is crashed and VMM reboots VM forcely, the vCPU reboot
notification callback will not be called in VM. Host needs invalidate
the gpa address, else host will modify guest memory during VM reboots.
Here it is invalidated from the vCPU KVM_REG_LOONGARCH_VCPU_RESET ioctl
interface.
Also funciton kvm_reset_timer() is removed at vCPU reset stage, since SW
emulated timer is only used in vCPU block state. When a vCPU is removed
from the block waiting queue, kvm_restore_timer() is called and SW timer
is cancelled. And the timer register is also cleared at VMM when a vCPU
is reset.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
There exist some warnings when building kernel if CONFIG_CPU_HAS_LBT is
set but CONFIG_CPU_HAS_LSX and CONFIG_CPU_HAS_LASX are not set. In this
case, there are no definitions of _restore_lsx & _restore_lasx and there
are also no definitions of kvm_restore_lsx & kvm_restore_lasx in fpu.S
and switch.S respectively, just add some ifdefs to fix these warnings.
AS arch/loongarch/kernel/fpu.o
arch/loongarch/kernel/fpu.o: warning: objtool: unexpected relocation symbol type in .rela.discard.func_stack_frame_non_standard: 0
arch/loongarch/kernel/fpu.o: warning: objtool: unexpected relocation symbol type in .rela.discard.func_stack_frame_non_standard: 0
AS [M] arch/loongarch/kvm/switch.o
arch/loongarch/kvm/switch.o: warning: objtool: unexpected relocation symbol type in .rela.discard.func_stack_frame_non_standard: 0
arch/loongarch/kvm/switch.o: warning: objtool: unexpected relocation symbol type in .rela.discard.func_stack_frame_non_standard: 0
MODPOST Module.symvers
ERROR: modpost: "kvm_restore_lsx" [arch/loongarch/kvm/kvm.ko] undefined!
ERROR: modpost: "kvm_restore_lasx" [arch/loongarch/kvm/kvm.ko] undefined!
Cc: stable@vger.kernel.org # 6.9+
Fixes: cb8a2ef084 ("LoongArch: Add ORC stack unwinder support")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202408120955.qls5oNQY-lkp@intel.com/
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Currently we call irq_set_noprobe() in a loop for all IRQs, but indeed
it only works for IRQs below NR_IRQS_LEGACY because at init_IRQ() only
legacy interrupts have been allocated.
Instead, we can define ARCH_IRQ_INIT_FLAGS as IRQ_NOPROBE in asm/hwirq.h
and the core will automatically set the flag for all interrupts.
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Tianyang Zhang <zhangtianyang@loongson.cn>
There's a warning (probably on some older compiler version):
fs/btrfs/fiemap.c: warning: 'last_extent_end' may be used uninitialized in this function [-Wmaybe-uninitialized]: => 822:19
Initialize the variable to 0 although it's not necessary as it's either
properly set or not used after an error. The called function is in the
same file so this is a false alert but we want to fix all
-Wmaybe-uninitialized reports.
Link: https://lore.kernel.org/all/20240819070639.2558629-1-geert@linux-m68k.org/
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David Sterba <dsterba@suse.com>
The driver must ensure TX descriptor updates are visible
before updating TX pointer and TX clear pointer.
This resolves TX hangs observed on AST2600 when running
iperf3.
Signed-off-by: Jacky Chou <jacky_chou@aspeedtech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
On some machines with a large number of CPUs there is a sizable delay
between an atomic replace occurring and when sysfs updates accordingly.
This fix uses 'loop_until' to wait for the atomic replace to unload all
previous livepatches.
Reported-by: CKI Project <cki-project@redhat.com>
Closes: https://datawarehouse.cki-project.org/kcidb/tests/redhat:1413102084-x86_64-kernel_upt_28
Signed-off-by: Ryan Sullivan <rysulliv@redhat.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Joe Lawrence <joe.lawrence@redhat.com>
Link: https://lore.kernel.org/r/20240822173122.14760-1-rysulliv@redhat.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
There are 2G and 4G RAM versions of the Lenovo Yoga Tab 3 X90F and it
turns out that the 2G version has a DMI product name of
"CHERRYVIEW D1 PLATFORM" where as the 4G version has
"CHERRYVIEW C0 PLATFORM". The sys-vendor + product-version check are
unique enough that the product-name check is not necessary.
Drop the product-name check so that the existing DMI match for the 4G
RAM version also matches the 2G RAM version.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240825132415.8307-1-hdegoede@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The Asus Zenbook Duo (UX8406MA) has a keyboard which can be
placed on the laptop to connect it via USB, or can be removed from the
laptop to reveal a hidden secondary display in which case the keyboard
operates via Bluetooth.
When it is placed on the secondary display to connect via USB, it emits
a keypress for a wireless disable. This causes the rfkill system to be
activated disconnecting the current wifi connection, which doesn't
reflect the user's true intention.
Detect this hardware and suppress any wireless switches from the
keyboard; this keyboard does not have a wireless toggle capability so
these presses are always spurious.
Signed-off-by: Mathieu Fenniak <mathieu@fenniak.net>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240823135630.128447-1-mathieu@fenniak.net
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Subtract network offset to skb->len before performing IPv4 header sanity
checks, then adjust transport offset from offset from mac header.
Jorge Ortiz says:
When small UDP packets (< 4 bytes payload) are sent from eth0,
`meta l4proto udp` condition is not met because `NFT_PKTINFO_L4PROTO` is
not set. This happens because there is a comparison that checks if the
transport header offset exceeds the total length. This comparison does
not take into account the fact that the skb network offset might be
non-zero in egress mode (e.g., 14 bytes for Ethernet header).
Fixes: 0ae8e4cca7 ("netfilter: nf_tables: set transport offset from mac header for netdev/egress")
Reported-by: Jorge Ortiz <jorge.ortiz.escribano@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Move the initialization of parent->mutex into
hda_component_manager_init() so that it is always valid.
In hda_component_manager_bind() do not clear the parent information.
Only zero-fill the per-component data ready for it to be filled in
by the components as they bind.
Previously parent->mutex was being initialized only in
hda_component_manager_bind(). This meant that it was only
initialized if all components appeared and there was a bind callback.
If there wasn't a bind the mutex object was not valid when the
Realtek driver called any of the other functions.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 047b9cbbaa ("ALSA: hda: hda_component: Protect shared data with a mutex")
Link: https://patch.msgid.link/20240826094940.45563-1-rf@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds the HP Pavilion Aero 13 (13-bg0xxx) (year 2024) to list of
quirks for keyboard LED mute indication.
The laptop has two LEDs (one for speaker and one for mic mute). The
pre-existing quirk ALC245_FIXUP_HP_X360_MUTE_LEDS chains both the quirk for
mic and speaker mute.
Tested on 6.11.0-rc4 with the aforementioned laptop.
Signed-off-by: Hendrik Borghorst <hendrikborghorst@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240825174351.5687-1-hendrikborghorst@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Like the getrandom() syscall, vDSO getrandom() must also reject unknown
flags. [1]
It would be possible to return -EINVAL from vDSO itself, but in the
possible case that a new flag is added to getrandom() syscall in the
future, it would be easier to get the behavior from the syscall, instead
of erroring until the vDSO is extended to support the new flag or
explicitly falling back.
[1] Designing the API: Planning for Extension
https://docs.kernel.org/process/adding-syscalls.html#designing-the-api-planning-for-extension
Signed-off-by: Yann Droneaud <yann@droneaud.fr>
[Jason: reworded commit message]
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Add Jean-Philippe as a reviewer for the Arm SMMUv3 SVA support, since
he's been a consistent contributor to that code over the years and
understands the relevant parts of the architecture much better than me.
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Jean-Philippe Brucker <jean-philippe@linaro.org>
Cc: Mostafa Saleh <smostafa@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240823165454.1064-1-will@kernel.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
These three implementations of map_pages() all succeed if a mapping is
requested with no read or write. Since they return back to __iommu_map()
leaving the mapped output as 0 it triggers an infinite loop. Therefore
nothing is using no-access protection bits.
Further, VFIO and iommufd rely on iommu_iova_to_phys() to get back PFNs
stored by map, if iommu_map() succeeds but iommu_iova_to_phys() fails that
will create serious bugs.
Thus remove this never used "nothing to do" concept and just fail map
immediately.
Fixes: e5fc9753b1 ("iommu/io-pgtable: Add ARMv7 short descriptor support")
Fixes: e1d3c0fd70 ("iommu: add ARM LPAE page table allocator")
Fixes: 745ef1092b ("iommu/io-pgtable: Move Apple DART support to its own file")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/2-v1-1211e1294c27+4b1-iommu_no_prot_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This results in passing 0 or just IOMMU_CACHE to iommu_map(). Most of
the page table formats don't like this:
amdv1 - -EINVAL
armv7s - returns 0, doesn't update mapped
arm-lpae - returns 0 doesn't update mapped
dart - returns 0, doesn't update mapped
VT-D - returns -EINVAL
Unfortunately the three formats that return 0 cause serious problems:
- Returning ret = but not uppdating mapped from domain->map_pages()
causes an infinite loop in __iommu_map()
- Not writing ioptes means that VFIO/iommufd have no way to recover them
and we will have memory leaks and worse during unmap
Since almost nothing can support this, and it is a useless thing to do,
block it early in iommufd.
Cc: stable@kernel.org
Fixes: aad37e71d5 ("iommufd: IOCTLs for the io_pagetable")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/1-v1-1211e1294c27+4b1-iommu_no_prot_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The helper intel_context_flush_present() is designed to flush all related
caches when a context entry with the present bit set is modified. It
currently retrieves the domain ID from the context entry and uses it to
flush the IOTLB and context caches. This is incorrect when the context
entry transitions from present to non-present, as the domain ID field is
cleared before calling the helper.
Fix it by passing the domain ID programmed in the context entry before the
change to intel_context_flush_present(). This ensures that the correct
domain ID is used for cache invalidation.
Fixes: f90584f4be ("iommu/vt-d: Add helper to flush caches for context change")
Reported-by: Alex Williamson <alex.williamson@redhat.com>
Closes: https://lore.kernel.org/linux-iommu/20240814162726.5efe1a6e.alex.williamson@redhat.com/
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Jacob Pan <jacob.pan@linux.microsoft.com>
Link: https://lore.kernel.org/r/20240815124857.70038-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
I notice a rmap query bug in xfs_io fsmap:
[root@fedora ~]# xfs_io -c 'fsmap -vvvv' /mnt
EXT: DEV BLOCK-RANGE OWNER FILE-OFFSET AG AG-OFFSET TOTAL
0: 253:16 [0..7]: static fs metadata 0 (0..7) 8
1: 253:16 [8..23]: per-AG metadata 0 (8..23) 16
2: 253:16 [24..39]: inode btree 0 (24..39) 16
3: 253:16 [40..47]: per-AG metadata 0 (40..47) 8
4: 253:16 [48..55]: refcount btree 0 (48..55) 8
5: 253:16 [56..103]: per-AG metadata 0 (56..103) 48
6: 253:16 [104..127]: free space 0 (104..127) 24
......
Bug:
[root@fedora ~]# xfs_io -c 'fsmap -vvvv -d 0 3' /mnt
[root@fedora ~]#
Normally, we should be able to get one record, but we got nothing.
The root cause of this problem lies in the incorrect setting of rm_owner in
the rmap query. In the case of the initial query where the owner is not
set, __xfs_getfsmap_datadev() first sets info->high.rm_owner to ULLONG_MAX.
This is done to prevent any omissions when comparing rmap items. However,
if the current ag is detected to be the last one, the function sets info's
high_irec based on the provided key. If high->rm_owner is not specified, it
should continue to be set to ULLONG_MAX; otherwise, there will be issues
with interval omissions. For example, consider "start" and "end" within the
same block. If high->rm_owner == 0, it will be smaller than the founded
record in rmapbt, resulting in a query with no records. The main call stack
is as follows:
xfs_ioc_getfsmap
xfs_getfsmap
xfs_getfsmap_datadev_rmapbt
__xfs_getfsmap_datadev
info->high.rm_owner = ULLONG_MAX
if (pag->pag_agno == end_ag)
xfs_fsmap_owner_to_rmap
// set info->high.rm_owner = 0 because fmr_owner == -1ULL
dest->rm_owner = 0
// get nothing
xfs_getfsmap_datadev_rmapbt_query
The problem can be resolved by simply modify the xfs_fsmap_owner_to_rmap
function internal logic to achieve.
After applying this patch, the above problem have been solved:
[root@fedora ~]# xfs_io -c 'fsmap -vvvv -d 0 3' /mnt
EXT: DEV BLOCK-RANGE OWNER FILE-OFFSET AG AG-OFFSET TOTAL
0: 253:16 [0..7]: static fs metadata 0 (0..7) 8
Fixes: e89c041338 ("xfs: implement the GETFSMAP ioctl")
Signed-off-by: Zizhi Wo <wozizhi@huawei.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Don't bother reporting the number of bytes that we "trimmed" because the
underlying storage isn't required to do anything(!) and failed discard
IOs aren't reported to the caller anyway. It's not like userspace can
use the reported value for anything useful like adjusting the offset
parameter of the next call, and it's not like anyone ever wrote a
manpage about FITRIM's out parameters.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
As a result of the factoring in commit 14dd46cf31 ("xfs: split
xfs_inobt_init_cursor"), mount started taking a long time on a
user's filesystem. For Anders, this made mount times regress from
under a second to over 15 minutes for a filesystem with only 30
million inodes in it.
Anders bisected it down to the above commit, but even then the bug
was not obvious. In this commit, over 20 calls to
xfs_inobt_init_cursor() were modified, and some we modified to call
a new function named xfs_finobt_init_cursor().
If that takes you a moment to reread those function names to see
what the rename was, then you have realised why this bug wasn't
spotted during review. And it wasn't spotted on inspection even
after the bisect pointed at this commit - a single missing "f" isn't
the easiest thing for a human eye to notice....
The result is that xfs_finobt_count_blocks() now incorrectly calls
xfs_inobt_init_cursor() so it is now walking the inobt instead of
the finobt. Hence when there are lots of allocated inodes in a
filesystem, mount takes a -long- time run because it now walks a
massive allocated inode btrees instead of the small, nearly empty
free inode btrees. It also means all the finobt space reservations
are wrong, so mount could potentially given ENOSPC on kernel
upgrade.
In hindsight, commit 14dd46cf31 should have been two commits - the
first to convert the finobt callers to the new API, the second to
modify the xfs_inobt_init_cursor() API for the inobt callers. That
would have made the bug very obvious during review.
Fixes: 14dd46cf31 ("xfs: split xfs_inobt_init_cursor")
Reported-by: Anders Blomdell <anders.blomdell@gmail.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
willy pointed out that folio_mark_dirty is the correct function to use
to mark an xfile folio dirty because it calls out to the mapping's aops
to mark it dirty. For tmpfs this likely doesn't matter much since it
currently uses nop_dirty_folio, but let's use the abstractions properly.
Reported-by: willy@infradead.org
Fixes: 6907e3c00a ("xfs: add file_{get,put}_folio")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
"KjellR" complained on IRC that an old V4 filesystem suddenly stopped
mounting after upgrading from 6.9.11 to 6.10.3, with the following splat
when trying to read the rt bitmap inode:
00000000: 49 4e 80 00 01 02 00 01 00 00 00 00 00 00 00 00 IN..............
00000010: 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000020: 00 00 00 00 00 00 00 00 43 d2 a9 da 21 0f d6 30 ........C...!..0
00000030: 43 d2 a9 da 21 0f d6 30 00 00 00 00 00 00 00 00 C...!..0........
00000040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000050: 00 00 00 02 00 00 00 00 00 00 00 04 00 00 00 00 ................
00000060: ff ff ff ff 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
As Dave Chinner points out, this is a V1 inode with both di_onlink and
di_nlink set to 1 and di_flushiter == 0. In other words, this inode was
formatted this way by mkfs and hasn't been touched since then.
Back in the old days of xfsprogs 3.2.3, I observed that libxfs_ialloc
would set di_nlink, but if the filesystem didn't have NLINK, it would
then set di_version = 1. libxfs_iflush_int later sees the V1 inode and
copies the value of di_nlink to di_onlink without zeroing di_onlink.
Eventually this filesystem must have been upgraded to support NLINK
because 6.10 doesn't support !NLINK filesystems, which is how we tripped
over this old behavior. The filesystem doesn't have a realtime section,
so that's why the rtbitmap inode has never been touched.
Fix this by removing the di_onlink/di_nlink checking for all V1/V2
inodes because this is a muddy mess. The V3 inode handling code has
always supported NLINK and written di_onlink==0 so keep that check.
The removal of the V1 inode handling code when we dropped support for
!NLINK obscured this old behavior.
Reported-by: kjell.m.randa@gmail.com
Fixes: 40cb8613d6 ("xfs: check unused nlink fields in the ondisk inode")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Coherent surfaces make only sense if the host renders to them using
accelerated apis. Without 3d the entire content of dumb buffers stays
in the guest making all of the extra work they're doing to synchronize
between guest and host useless.
Configurations without 3d also tend to run with very low graphics
memory limits. The pinned console fb, mob cursors and graphical login
manager tend to run out of 16MB graphics memory that those guests use.
Fix it by making sure the coherent dumb buffers are only used on
configs with 3d enabled.
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Fixes: d6667f0ddf ("drm/vmwgfx: Fix handling of dumb buffers")
Reported-by: Christian Heusel <christian@heusel.eu>
Closes: https://lore.kernel.org/all/0d0330f3-2ac0-4cd5-8075-7f1cbaf72a8e@heusel.eu
Cc: Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.9+
Link: https://patchwork.freedesktop.org/patch/msgid/20240816183332.31961-4-zack.rusin@broadcom.com
Reviewed-by: Martin Krastev <martin.krastev@broadcom.com>
Reviewed-by: Maaz Mombasawala <maaz.mombasawala@broadcom.com>
Tested-by: Benjamin Coddington <bcodding@redhat.com>
Make sure that for external buffers mapping goes through the dma_buf
interface instead of trying to access pages directly.
External buffers might not provide direct access to readable/writable
pages so to make sure the bo's created from external dma_bufs can be
read dma_buf interface has to be used.
Fixes crashes in IGT's kms_prime with vgem. Regular desktop usage won't
trigger this due to the fact that virtual machines will not have
multiple GPUs but it enables better test coverage in IGT.
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Fixes: b32233acce ("drm/vmwgfx: Fix prime import/export")
Cc: <stable@vger.kernel.org> # v6.6+
Cc: Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.9+
Link: https://patchwork.freedesktop.org/patch/msgid/20240816183332.31961-3-zack.rusin@broadcom.com
Reviewed-by: Martin Krastev <martin.krastev@broadcom.com>
Reviewed-by: Maaz Mombasawala <maaz.mombasawala@broadcom.com>
The kms paths keep a persistent map active to read and compare the cursor
buffer. These maps can race with each other in simple scenario where:
a) buffer "a" mapped for update
b) buffer "a" mapped for compare
c) do the compare
d) unmap "a" for compare
e) update the cursor
f) unmap "a" for update
At step "e" the buffer has been unmapped and the read contents is bogus.
Prevent unmapping of active read buffers by simply keeping a count of
how many paths have currently active maps and unmap only when the count
reaches 0.
Fixes: 485d98d472 ("drm/vmwgfx: Add support for CursorMob and CursorBypass 4")
Cc: Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.19+
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240816183332.31961-2-zack.rusin@broadcom.com
Reviewed-by: Martin Krastev <martin.krastev@broadcom.com>
Reviewed-by: Maaz Mombasawala <maaz.mombasawala@broadcom.com>
policy_unpack_test fails on big endian systems because data byte order
is expected to be little endian but is generated in host byte order.
This results in test failures such as:
# policy_unpack_test_unpack_array_with_null_name: EXPECTATION FAILED at security/apparmor/policy_unpack_test.c:150
Expected array_size == (u16)16, but
array_size == 4096 (0x1000)
(u16)16 == 16 (0x10)
# policy_unpack_test_unpack_array_with_null_name: pass:0 fail:1 skip:0 total:1
not ok 3 policy_unpack_test_unpack_array_with_null_name
# policy_unpack_test_unpack_array_with_name: EXPECTATION FAILED at security/apparmor/policy_unpack_test.c:164
Expected array_size == (u16)16, but
array_size == 4096 (0x1000)
(u16)16 == 16 (0x10)
# policy_unpack_test_unpack_array_with_name: pass:0 fail:1 skip:0 total:1
Add the missing endianness conversions when generating test data.
Fixes: 4d944bcd4e ("apparmor: add AppArmor KUnit tests for policy unpack")
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This reverts commit 7190401fc5.
Verifying the clock source sometimes deems the MIPS clock
to be unstable, at least in qemu.
clocksource: timekeeping watchdog on CPU0: Marking clocksource 'MIPS' as unstable because the skew is too large:
clocksource: 'jiffies' wd_nsec: 500000000 wd_now: ffff8bde wd_last: ffff8bac mask: ffffffff
clocksource: 'MIPS' cs_nsec: 940634468 cs_now: 310181c4 cs_last: 28090a09 mask: ffffffff
clocksource: Clocksource 'MIPS' skewed 440634468 ns (440 ms) over watchdog 'jiffies' interval of 500000000 ns (500 ms)
clocksource: 'MIPS' is current clocksource.
If this happens, network interfaces fail to come online.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Before commit 721f4a6526 ("mm/memblock: remove empty dummy entry") the
check for non-zero of memblock.reserved.cnt in mmu_init() would always
be true either because memblock.reserved.cnt is initialized to 1 or
because there were memory reservations earlier.
The removal of dummy empty entry in memblock caused this check to fail
because now memblock.reserved.cnt is initialized to 0.
Remove the check for non-zero of memblock.reserved.cnt because it's
perfectly fine to have an empty memblock.reserved array that early in
boot.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Mike Rapoport <rppt@kernel.org>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240729053327.4091459-1-rppt@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
X570-E GAMING does not have VRM temperature sensor.
Signed-off-by: Ross Brown <true.robot.ross@gmail.com>
Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
Link: https://lore.kernel.org/r/20240730062320.5188-2-eugene.shalygin@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
We have transient failures with btrfs/301, specifically in the part
where we do
for i in $(seq 0 10); do
write 50m to file
rm -f file
done
Sometimes this will result in a transient quota error, and it's because
sometimes we start writeback on the file which results in a delayed
iput, and thus the rm doesn't actually clean the file up. When we're
flushing the quota space we need to run the delayed iputs to make sure
all the unlinks that we think have completed have actually completed.
This removes the small window where we could fail to find enough space
in our quota.
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
144d:c1cc requires the same workaround to enable the speaker amp
as other Samsung models with the ALC298 codec.
Signed-off-by: YOUNGJIN JOO <neoelec@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240825092515.28728-1-neoelec@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
dma-direct.h is introduced in commit d4b6f1562a ("LoongArch: Add
Non-Uniform Memory Access (NUMA) support"). In commit c78c43fe7d
("LoongArch: Use acpi_arch_dma_setup() and remove ARCH_HAS_PHYS_TO_DMA"),
ARCH_HAS_PHYS_TO_DMA was deselected and the coresponding phys_to_dma()/
dma_to_phys() functions were removed. However, the unused dma-direct.h
was left behind, which is removed by this patch.
Cc: <stable@vger.kernel.org>
Fixes: c78c43fe7d ("LoongArch: Use acpi_arch_dma_setup() and remove ARCH_HAS_PHYS_TO_DMA")
Signed-off-by: Miao Wang <shankerwangmiao@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The cifs filesystem doesn't quite emulate FALLOC_FL_PUNCH_HOLE correctly
(note that due to lack of protocol support, it can't actually implement it
directly). Whilst it will (partially) invalidate dirty folios in the
pagecache, it doesn't write them back first, and so the EOF marker on the
server may be lower than inode->i_size.
This presents a problem, however, as if the punched hole invalidates the
tail of the locally cached dirty data, writeback won't know it needs to
move the EOF over to account for the hole punch (which isn't supposed to
move the EOF). We could just write zeroes over the punched out region of
the pagecache and write that back - but this is supposed to be a
deallocatory operation.
Fix this by manually moving the EOF over on the server after the operation
if the hole punched would corrupt it.
Note that the FSCTL_SET_ZERO_DATA RPC and the setting of the EOF should
probably be compounded to stop a third party interfering (or, at least,
massively reduce the chance).
This was reproducible occasionally by using fsx with the following script:
truncate 0x0 0x375e2 0x0
punch_hole 0x2f6d3 0x6ab5 0x375e2
truncate 0x0 0x3a71f 0x375e2
mapread 0xee05 0xcf12 0x3a71f
write 0x2078e 0x5604 0x3a71f
write 0x3ebdf 0x1421 0x3a71f *
punch_hole 0x379d0 0x8630 0x40000 *
mapread 0x2aaa2 0x85b 0x40000
fallocate 0x1b401 0x9ada 0x40000
read 0x15f2 0x7d32 0x40000
read 0x32f37 0x7a3b 0x40000 *
The second "write" should extend the EOF to 0x40000, and the "punch_hole"
should operate inside of that - but that depends on whether the VM gets in
and writes back the data first. If it doesn't, the file ends up 0x3a71f in
size, not 0x40000.
Fixes: 31742c5a33 ("enable fallocate punch hole ("fallocate -p") for SMB3")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <sfrench@samba.org>
cc: Paulo Alcantara <pc@manguebit.com>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
Signed-off-by: Steve French <stfrench@microsoft.com>
rqst.rq_iter needs to be truncated otherwise we'll
also send the bytes into the stream socket...
This is the logic behind rqst.rq_npages = 0, which was removed in
"cifs: Change the I/O paths to use an iterator rather than a page list"
(d08089f649).
Cc: stable@vger.kernel.org
Fixes: d08089f649 ("cifs: Change the I/O paths to use an iterator rather than a page list")
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Fixes: d08089f649 ("cifs: Change the I/O paths to use an iterator rather than a page list")
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This happens when called from SMB2_read() while using rdma
and reaching the rdma_readwrite_threshold.
Cc: stable@vger.kernel.org
Fixes: a6559cc1d3 ("cifs: split out smb3_use_rdma_offload() helper")
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
- rhashtable conversion for vfs inodes
- rcu_pending, btree key cache conversion
+ nocow deadlock fix
+ fix for new rebalance_work accounting
-----BEGIN PGP SIGNATURE-----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=ejxu
-----END PGP SIGNATURE-----
Merge tag 'bcachefs-2024-08-24' of git://evilpiepirate.org/bcachefs
Pull bcachefs fixes from Kent Overstreet:
- assorted syzbot fixes
- some upgrade fixes for old (pre 1.0) filesystems
- fix for moving data off a device that was switched to durability=0
after data had been written to it.
- nocow deadlock fix
- fix for new rebalance_work accounting
* tag 'bcachefs-2024-08-24' of git://evilpiepirate.org/bcachefs: (28 commits)
bcachefs: Fix rebalance_work accounting
bcachefs: Fix failure to flush moves before sleeping in copygc
bcachefs: don't use rht_bucket() in btree_key_cache_scan()
bcachefs: add missing inode_walker_exit()
bcachefs: clear path->should_be_locked in bch2_btree_key_cache_drop()
bcachefs: Fix double assignment in check_dirent_to_subvol()
bcachefs: Fix refcounting in discard path
bcachefs: Fix compat issue with old alloc_v4 keys
bcachefs: Fix warning in bch2_fs_journal_stop()
fs/super.c: improve get_tree() error message
bcachefs: Fix missing validation in bch2_sb_journal_v2_validate()
bcachefs: Fix replay_now_at() assert
bcachefs: Fix locking in bch2_ioc_setlabel()
bcachefs: fix failure to relock in btree_node_fill()
bcachefs: fix failure to relock in bch2_btree_node_mem_alloc()
bcachefs: unlock_long() before resort in journal replay
bcachefs: fix missing bch2_err_str()
bcachefs: fix time_stats_to_text()
bcachefs: Fix bch2_bucket_gens_init()
bcachefs: Fix bch2_trigger_alloc assert
...
-----BEGIN PGP SIGNATURE-----
iQGzBAABCgAdFiEE6fsu8pdIjtWE/DpLiiy9cAdyT1EFAmbJteoACgkQiiy9cAdy
T1F+Pwv/RHXSnQD+jkFEfQCEgsZZOfWD0V74VZqm90N48gfB3giZw9mtV4I1jQzI
0+UerZjN7lHIDC4f6qp48TSEodHpprAxLfsg5JJN/OxDE+0MSbctTjLeHlduVzw6
iHEdaE3jWN0p4YZRdbyrUCaOoTEk9cKwiG7r2DjArNyQ8kClveeqrGfdZUDTHNkv
IIs6CJ8PFo7dicpAIGPmMz1TGq5Lh2EFjZTYEweSSlyXUNKaWgz3BXBIXD4LwK6w
mFjGPxGNBDorcvzHcOUZnrpfACB3WNOSPN/WK5sQL6LXGCx3sWtUvGxLFkxFwjSq
D7gvo7qnBuycNyR03RfmWyXYx+2KzdYoAUGTNV114zMJskBC0QhIIF6JK+xZdPZX
XHxbr4CRR7fsaZOur5MTWXEzVJxvC1irULKoBp7lvYpEoAV6yXpK3XegAHIASKUE
/Cw9qikIvxrMg4BjWPP1JhbKRw92uL2ty4oO913hbnBsScS8jCystuNl6ataiXWq
PN5rN4sy
=bGOb
-----END PGP SIGNATURE-----
Merge tag '6.11-rc5-server-fixes' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
- query directory flex array fix
- fix potential null ptr reference in open
- fix error message in some open cases
- two minor cleanups
* tag '6.11-rc5-server-fixes' of git://git.samba.org/ksmbd:
smb/server: update misguided comment of smb2_allocate_rsp_buf()
smb/server: remove useless assignment of 'file_present' in smb2_open()
smb/server: fix potential null-ptr-deref of lease_ctx_info in smb2_open()
smb/server: fix return value of smb2_open()
ksmbd: the buffer of smb2 query dir response has at least 1 byte
- Fix KASLR base offset to account for symbol offsets in the vmlinux
ELF file, preventing tool breakages like the drgn debugger
- Fix potential memory corruption of physmem_info during kernel physical
address randomization
- Fix potential memory corruption due to overlap between the relocated
lowcore and identity mapping by correctly reserving lowcore memory
- Fix performance regression and avoid randomizing identity mapping base
by default
- Fix unnecessary delay of AP bus binding complete uevent to prevent
startup lag in KVM guests using AP
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAmbJDQYACgkQjYWKoQLX
FBgTdwf9FNkHvLFhf5JbqlIERrjI9Ax8lQwCrAAJOidWwyKKs5hkFXUbf8JeMO1/
r/eIWI/hqeeQhm/YXWsdrO1KOi2tS92eHTztelTZjKS7d2nLEkl5EELRtE6lVwWK
6T/iENQNtBibRnK6zDRb3acb/MGkdQEDfNmvRwI02ZwIvGlv6bQnQEspKc69YJOo
DiDHb+aqpsSjAY9QlRzM/Dxg3NUknEYOfxoDY6rG9cL1KnZxk+PDfy+z9gno44Tx
vf+G55lBQ+vunQsV/9YHKYsytsj7kYCECp/W50W1ExrOBPhZRR9zM2S14BVCGuIW
EdLVD8R1h0oRcgqlCIrKsnxAqatzIQ==
=RsEC
-----END PGP SIGNATURE-----
Merge tag 's390-6.11-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- Fix KASLR base offset to account for symbol offsets in the vmlinux
ELF file, preventing tool breakages like the drgn debugger
- Fix potential memory corruption of physmem_info during kernel
physical address randomization
- Fix potential memory corruption due to overlap between the relocated
lowcore and identity mapping by correctly reserving lowcore memory
- Fix performance regression and avoid randomizing identity mapping
base by default
- Fix unnecessary delay of AP bus binding complete uevent to prevent
startup lag in KVM guests using AP
* tag 's390-6.11-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/boot: Fix KASLR base offset off by __START_KERNEL bytes
s390/boot: Avoid possible physmem_info segment corruption
s390/ap: Refine AP bus bindings complete processing
s390/mm: Pin identity mapping base to zero
s390/mm: Prevent lowcore vs identity mapping overlap
