Regarding Exynos Auto v9 SoC, it supports uarts up to 12. However, the
maximum number of the ports has been derived from
CONFIG_SERIAL_SAMSUNG_UARTS and tightly coupled with the config for
previous Samsung SoCs such as s3c24xx and s3c64xx. To overcome this
limitation, this changes the usage of the definition to UART_NR which is
widely used from other serial drivers. This also defines the value to 12
only for ARM64 SoCs to not affect the change to previous arm32 SoCs.
Instead of enumerating all the ports as predefined arrays, this
introduces s3c24xx_serial_init_port_default that is initializing the
structure as the default value.
Reviewed-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Link: https://lore.kernel.org/r/20220629005538.60132-1-chanho61.park@samsung.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add 9th bit multipoint addressing mode for DW UART. 9th bit addressing
can be used only when HW RS485 is available.
Updating RAR (receive address register) is bit tricky because busy
indication is not be available when DW UART is strictly 16550
compatible, which is the case with the hardware I was testing with. RAR
should not be updated while receive is in progress which is now
achieved by deasserting RE and waiting for one frame (in case rx would
be in progress, the driver seems to have no way of knowing it w/o busy
indication). Because of this complexity, it's better to avoid doing it
unless really needed.
Co-developed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Co-developed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Co-developed-by: Raymond Tan <raymond.tan@intel.com>
Co-developed-by: Lakshmi Sowjanya <lakshmi.sowjanya.d@intel.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Raymond Tan <raymond.tan@intel.com>
Signed-off-by: Lakshmi Sowjanya <lakshmi.sowjanya.d@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220624204210.11112-7-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for RS-485 multipoint addressing using 9th bit [*]. The
addressing mode is configured through ->rs485_config().
ADDRB in termios indicates 9th bit addressing mode is enabled. In this
mode, 9th bit is used to indicate an address (byte) within the
communication line. ADDRB can only be enabled/disabled through
->rs485_config() that is also responsible for setting the destination and
receiver (filter) addresses.
Add traps to detect unwanted changes to struct serial_rs485 layout using
static_assert().
[*] Technically, RS485 is just an electronic spec and does not itself
specify the 9th bit addressing mode but 9th bit seems at least
"semi-standard" way to do addressing with RS485.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220624204210.11112-6-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To be able to alter ADDRB within ->rs485_config(), take termios_rwsem
before calling ->rs485_config() and pass termios.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220624204210.11112-5-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use 32-bit reads in order to not lose higher bits of DW UART regs. This
change does not fix any known issue as the high bits are not used for
anything related to 8250 driver (dw8250_readl_ext and dw8250_writel_ext
used within the dwlib are already doing
readl/writel/ioread32be/iowrite32be anyway).
This change is necessary to enables 9th bit address mode. DW UART
reports address frames with BIT(8) of LSR.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220624204210.11112-4-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
DW flags address received as BIT(8) in LSR. In order to not lose that
on read, enlarge lsr_saved_flags to u16.
Adjust lsr/status variables and related call chains to use u16.
Technically, some of these type conversion would not be needed but it
doesn't hurt to be consistent.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220624204210.11112-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Per file BOTH_EMPTY defines are littering our source code here and
there. Define once in serial.h and create helper for the check
too.
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220624205424.12686-7-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Both UART_XMIT_SIZE and SERIAL_XMIT_SIZE are defined. Make them all
UART_XMIT_SIZE.
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220624205424.12686-6-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use C99 array initializer insteads of comments and make unmapped checks
more obvious.
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220624205424.12686-5-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Instead of listing the bits for UART_LSR_BRK_ERROR_BITS and
UART_MSR_ANY_DELTA in comment, use them to define instead.
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220624205424.12686-4-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Using UART_* to name defines is a bit problematic. When trying to do
unrelated cleanup which also involved tweaking header inclusion logic,
caused UART_CSR from serial_reg.h to leak into msm's namespace which is
also among msm defines. Thus, rename all UART_* ones to MSM_UART_* to
eliminate possibility of collisions.
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220624205424.12686-3-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Create static inline instead of define as it provides type safety and
is safer wrt. macros expansion.
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220624205424.12686-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is no need for clk_prepare_enable() at the beginning of
atmel_console_setup() and clk_disable_unprepare() at the end of
atmel_console_setup() as the clock is already enabled when calling
atmel_console_setup() and its disablement is done at the end
of probe.
Acked-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220616140024.2081238-4-claudiu.beznea@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use devm_clk_get() for serial clock instead of clk_get()/clk_put().
With this move the clk_get in driver's probe function.
Acked-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220616140024.2081238-3-claudiu.beznea@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stop using legacy PM ops and switch using dev_pm_ops. Along with
it #ifdef CONFIG_PM are removed and __maybe_unused and pm_ptr() used
instead. Coding style recommends (at chapter Conditional Compilation)
to avoid using preprocessor conditional and use __maybe_unused
instead.
Acked-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220616140024.2081238-2-claudiu.beznea@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add myself as maintainer for DW 8250 UART and up it to Supported.
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/be58b398-71ff-7c12-1bf1-a09181d9c80@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In soc_info(), of_find_node_by_type() will return a node pointer
with refcount incremented. We should use of_node_put() when it is
not used anymore.
Acked-by: Timur Tabi <timur@kernel.org>
Signed-off-by: Liang He <windhl@126.com>
Link: https://lore.kernel.org/r/20220618060850.4058525-1-windhl@126.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In tegra_uart_init(), of_find_matching_node() will return a node
pointer with refcount incremented. We should use of_node_put()
when it is not used anymore.
Signed-off-by: Liang He <windhl@126.com>
Link: https://lore.kernel.org/r/20220615111747.3963930-1-windhl@126.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since commit 31f6bd7fad ("serial: Store character timing information
to uart_port"), per frame timing information is available on uart_port.
Uart port's timeout can be derived from frame_time by multiplying with
fifosize.
Most callers of uart_poll_timeout are not made under port's lock. To be
on the safe side, make sure frame_time is only accessed once. As
fifo_size is effectively a constant, it shouldn't cause any issues.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220613113905.22962-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The closing `` is missing. Add it.
Fixes: 6bb6fa6908 ("tty: Implement lookahead to process XON/XOFF timely")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/9bc6d45d-48c8-519-1646-78ba22505b1f@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The code expects "translations" to have 256 (E_TABSZ) values. Use the
macro instead of the constant to be explicit about this.
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220614090537.15557-8-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
con_do_clear_unimap() sets dflt to NULL and then calls
con_release_unimap() which does the very same as the first thing. So
remove the former as it is apparently superfluous.
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220614090537.15557-7-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use FIELD_GET() and GENMASK() helpers instead of direct shifts and ANDs.
This makes the code even more obvious. I didn't know about the helpers
at the time of writing the macros.
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220614090537.15557-6-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As a follow-up to the commit 4173f018aa (tty/vt: consolemap: rename
and document struct uni_pagedir), rename also the members of struct
vc_data. I.e. pagedir -> pagedict. And while touching all the places,
remove also the unnecessary vc_ prefix.
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220614090537.15557-5-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function uses too vague variable names like i, j, k for iterators, p,
q, p1, p2 for pointers etc.
Rename all these, so that it is clear what is going on:
- dict: for dictionaries.
- d, r, g: for dir, row, glyph iterators -- these are unsigned now.
- dir, row: for directory and row pointers.
- glyph: for the glyph.
- and so on...
This is a lot of shuffling, but the result pays off, IMO.
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220614090537.15557-4-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function still uses too vague parameter name after commit
50c92a1b2d (tty/vt: consolemap: saner variable names in
set_inverse_trans_unicode()).
So use "dict" instead of "p" for that parameter too.
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220614090537.15557-3-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The code still uses constants (macros) as bounds in loops after commit
17945d317a (tty/vt: consolemap: use ARRAY_SIZE()). The contants are at
least macros used also in the definition of the arrays. But use
ARRAY_SIZE() on two more places to ensure the loops never run out of
bounds even if the array definition change.
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220614090537.15557-1-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmKvgdceHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG0qMH/RnVz4BvYXVWWc1t
+4NT9N20pNzrByzUxSBsrLfL5BNIt9fNjrS0WLs4HlzExbiixvKIBHPkDZoCo1gQ
wxoqpJf2BMxmdXH46/wWdSszbdPk33eLM/MfYE2QfnmtYsDSLZQMzOUAcdh6qD53
ty9br3IM/g4ixCwxKRt3NNixjin4wTTxR5ZD2E5k0JAaT+4FW5llRvq92dA1UOq7
JeGRLkc2l0211MFLo0vtuPOyWMIQL8t98rKTzevwoVY7R9I/0uUJCbkU7mb9wMUY
yKYlTN/4ZikTTSxa8NpQsXHqTyOHaKmS5F6oE4sw9VurHI2u3Jmxy9j9AwO1Pn8C
JUizMCk=
=qqcu
-----END PGP SIGNATURE-----
Merge tag 'v5.19-rc3' into tty-next
We need the tty/serial fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- Make RESERVE_BRK() work again with older binutils. The recent
'simplification' broke that.
- Make early #VE handling increment RIP when successful.
- Make the #VE code consistent vs. the RIP adjustments and add comments.
- Handle load_unaligned_zeropad() across page boundaries correctly in #VE
when the second page is shared.
-----BEGIN PGP SIGNATURE-----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=sRtG
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2022-06-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
- Make RESERVE_BRK() work again with older binutils. The recent
'simplification' broke that.
- Make early #VE handling increment RIP when successful.
- Make the #VE code consistent vs. the RIP adjustments and add
comments.
- Handle load_unaligned_zeropad() across page boundaries correctly in
#VE when the second page is shared.
* tag 'x86-urgent-2022-06-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/tdx: Handle load_unaligned_zeropad() page-cross to a shared page
x86/tdx: Clarify RIP adjustments in #VE handler
x86/tdx: Fix early #VE handling
x86/mm: Fix RESERVE_BRK() for older binutils
- Remove obsolete CONFIG_X86_SMAP reference from objtool
- Fix overlapping text section failures in faddr2line for real
- Remove OBJECT_FILES_NON_STANDARD usage from x86 ftrace and replace it
with finegrained annotations so objtool can validate that code
correctly.
-----BEGIN PGP SIGNATURE-----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=12KJ
-----END PGP SIGNATURE-----
Merge tag 'objtool-urgent-2022-06-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull build tooling updates from Thomas Gleixner:
- Remove obsolete CONFIG_X86_SMAP reference from objtool
- Fix overlapping text section failures in faddr2line for real
- Remove OBJECT_FILES_NON_STANDARD usage from x86 ftrace and replace it
with finegrained annotations so objtool can validate that code
correctly.
* tag 'objtool-urgent-2022-06-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ftrace: Remove OBJECT_FILES_NON_STANDARD usage
faddr2line: Fix overlapping text section failures, the sequel
objtool: Fix obsolete reference to CONFIG_X86_SMAP
balance_push(). sched_setscheduler() spliced the balance callbacks accross
a lock break which makes an interleaving schedule() observe an empty list.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmKvHpETHHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYoUCfD/9LVsemdRGoz2Ur7LUjKMq9op7rzFmD
arDTPsvb5ukbD2u+PrObo6pkAQvmSu/b/qFhLQNkGLUMWn/Ok5mq2jikwArboT3X
k/BC56p7NSynJr2Xb035UcvlnLZxPn0giUo9SeGaGM4zm4rioXyrBWkmsjXmFh19
LrRTCip9Aom5F+ctCC96BOGvrsM/C3F4si7ZwEp8ZCcClmhrrZhTBEPFGKg0AuVJ
qJkxgVmvuszaS7CL5ZyHiE35liyqRYx/NLldVWWFKxQcBqlGxqB/4ymB3QyecJfI
VsuWr8oNZOGbjbhg7Nv/qdbDTz5dHxpEuzHx0osAFhUwQ7TSmJfh2InE1Xe0jNyU
0HXFsx2kmytLoMDuZCkzGJRaGotSsLL7ZTs2e6Ktbh4j42MGQaHYC5GbX68Doxv1
A9aoKenh658oU26kPXGI0iYo9tkToMY7U8HM56CXxaAc5+XwHKPoU2pUOUTrD0a/
eqP2Uu7QMuNzQ6M9vsD/lAm8HUlicp08h9s6wzENIwGSkJ7GdpItat5Mbh1pu7yh
dL1+1q6kZCBjc9oy7THV4Oqph6Hxgg/oze9Oi9f4ocvt97GHtn1ahEOxey2i/CJR
7912p/yxbVXWOmUV6BGZ1TxjV3P9HpgWD5KPt/vOItnhMeWFU0NnxW6e0JJSV4T9
5dmPK8wH0/Nzvg==
=k54w
-----END PGP SIGNATURE-----
Merge tag 'sched-urgent-2022-06-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Thomas Gleixner:
"A single scheduler fix plugging a race between sched_setscheduler()
and balance_push().
sched_setscheduler() spliced the balance callbacks accross a lock
break which makes it possible for an interleaving schedule() to
observe an empty list"
* tag 'sched-urgent-2022-06-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Fix balance_push() vs __sched_setscheduler()
worked until prandom_u32() was switched to the real random generator, which
takes a spinlock for extraction, which does not work on RT when invoked
from atomic contexts. lockdep has no requirement for real random numbers
and it turns out sched_clock() is good enough to create the cookie. That
works everywhere and is faster.
-----BEGIN PGP SIGNATURE-----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=iuyB
-----END PGP SIGNATURE-----
Merge tag 'locking-urgent-2022-06-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull lockdep fix from Thomas Gleixner:
"A RT fix for lockdep.
lockdep invokes prandom_u32() to create cookies. This worked until
prandom_u32() was switched to the real random generator, which takes a
spinlock for extraction, which does not work on RT when invoked from
atomic contexts.
lockdep has no requirement for real random numbers and it turns out
sched_clock() is good enough to create the cookie. That works
everywhere and is faster"
* tag 'locking-urgent-2022-06-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/lockdep: Use sched_clock() for random numbers
Here are some small char/misc driver fixes for 5.19-rc3 that resolve
some reported issues.
They include:
- mei driver fixes
- comedi driver fix
- rtsx build warning fix
- fsl-mc-bus driver fix
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYq8I/Q8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylZlgCdEnqmS5N5deU40WD0CwRchzg1PCsAnAz0XUsz
yAj2wz/dh6H741FisaoO
=Dfta
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.19-rc3-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes for real from Greg KH:
"Let's tag the proper branch this time...
Here are some small char/misc driver fixes for 5.19-rc3 that resolve
some reported issues.
They include:
- mei driver fixes
- comedi driver fix
- rtsx build warning fix
- fsl-mc-bus driver fix
All of these have been in linux-next for a while with no reported
issues"
This is what the merge in commit f0ec9c65a8 _should_ have merged, but
Greg fat-fingered the pull request and I got some small changes from
linux-next instead there. Credit to Nathan Chancellor for eagle-eyes.
Link: https://lore.kernel.org/all/Yqywy+Md2AfGDu8v@dev-arch.thelio-3990X/
* tag 'char-misc-5.19-rc3-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
bus: fsl-mc-bus: fix KASAN use-after-free in fsl_mc_bus_remove()
mei: me: add raptor lake point S DID
mei: hbm: drop capability response on early shutdown
mei: me: set internal pg flag to off on hardware reset
misc: rtsx: Fix clang -Wsometimes-uninitialized in rts5261_init_from_hw()
comedi: vmk80xx: fix expression for tx buffer size
-----BEGIN PGP SIGNATURE-----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=WbSS
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"MAINTAINERS rectifications and a few minor driver fixes"
* tag 'i2c-for-5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: mediatek: Fix an error handling path in mtk_i2c_probe()
i2c: designware: Use standard optional ref clock implementation
MAINTAINERS: core DT include belongs to core
MAINTAINERS: add include/dt-bindings/i2c to I2C SUBSYSTEM HOST DRIVERS
i2c: npcm7xx: Add check for platform_driver_register
MAINTAINERS: Update Synopsys DesignWare I2C to Supported
- Fix a bug where inode flag changes would accidentally drop nrext64.
- Fix a race condition when toggling LARP mode.
-----BEGIN PGP SIGNATURE-----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=vvDX
-----END PGP SIGNATURE-----
Merge tag 'xfs-5.19-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
"There's not a whole lot this time around (I'm still on vacation) but
here are some important fixes for new features merged in -rc1:
- Fix a bug where inode flag changes would accidentally drop nrext64
- Fix a race condition when toggling LARP mode"
* tag 'xfs-5.19-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: preserve DIFLAG2_NREXT64 when setting other inode attributes
xfs: fix variable state usage
xfs: fix TOCTOU race involving the new logged xattrs control knob
or error injection. Also fix up how test_dummy_encryption mount
option is handled for the new mount API. Finally, fix/cleanup a
number of comments and ext4 Documentation files.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmKuYpcACgkQ8vlZVpUN
gaMXwwf8DSHJ3gI2Lo0wrzJm7KSS0C+HK29/rtLCZdxECQsZR156ZzSF3zAFKOwK
Yx3RJwiFxrciUUytY/MWTyalCk+M8oW1093SfRqNNZCbZNi33acnbTqioa7INnDw
snFGGEU1y0M0AUduxNWPr71P80sTyQa0ZplIc4YeR98zzMvoWgi1dvo4wNdtJNQb
Gb0FtBhgP+IeK50eBlK4O0Eg5kqd0V5OeTLUYUfsWqU28ap8dHYE48I6sIdHx6az
sa6b2+YRuBxJUV61FNujuVtkDgUHXtXM97kkGpywRSLjo4iFxlQvX9Ew4lBD9RDI
b0YHVzK/DU9M3VfiYgzGwShCb/M68w==
=NtNY
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Fix a variety of bugs, many of which were found by folks using fuzzing
or error injection.
Also fix up how test_dummy_encryption mount option is handled for the
new mount API.
Finally, fix/cleanup a number of comments and ext4 Documentation
files"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix a doubled word "need" in a comment
ext4: add reserved GDT blocks check
ext4: make variable "count" signed
ext4: correct the judgment of BUG in ext4_mb_normalize_request
ext4: fix bug_on ext4_mb_use_inode_pa
ext4: fix up test_dummy_encryption handling for new mount API
ext4: use kmemdup() to replace kmalloc + memcpy
ext4: fix super block checksum incorrect after mount
ext4: improve write performance with disabled delalloc
ext4: fix warning when submitting superblock in ext4_commit_super()
ext4, doc: remove unnecessary escaping
ext4: fix incorrect comment in ext4_bio_write_page()
fs: fix jbd2_journal_try_to_free_buffers() kernel-doc comment
-----BEGIN PGP SIGNATURE-----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=oBRl
-----END PGP SIGNATURE-----
Merge tag '5.19-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs client fixes from Steve French:
"Two cifs debugging improvements - one found to deal with debugging a
multichannel problem and one for a recent fallocate issue
This does include the two larger multichannel reconnect (dynamically
adjusting interfaces on reconnect) patches, because we recently found
an additional problem with multichannel to one server type that I want
to include at the same time"
* tag '5.19-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: when a channel is not found for server, log its connection id
smb3: add trace point for SMB2_set_eof
We capture a NULL pointer issue when resizing a corrupt ext4 image which
is freshly clear resize_inode feature (not run e2fsck). It could be
simply reproduced by following steps. The problem is because of the
resize_inode feature was cleared, and it will convert the filesystem to
meta_bg mode in ext4_resize_fs(), but the es->s_reserved_gdt_blocks was
not reduced to zero, so could we mistakenly call reserve_backup_gdb()
and passing an uninitialized resize_inode to it when adding new group
descriptors.
mkfs.ext4 /dev/sda 3G
tune2fs -O ^resize_inode /dev/sda #forget to run requested e2fsck
mount /dev/sda /mnt
resize2fs /dev/sda 8G
========
BUG: kernel NULL pointer dereference, address: 0000000000000028
CPU: 19 PID: 3243 Comm: resize2fs Not tainted 5.18.0-rc7-00001-gfde086c5ebfd #748
...
RIP: 0010:ext4_flex_group_add+0xe08/0x2570
...
Call Trace:
<TASK>
ext4_resize_fs+0xbec/0x1660
__ext4_ioctl+0x1749/0x24e0
ext4_ioctl+0x12/0x20
__x64_sys_ioctl+0xa6/0x110
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f2dd739617b
========
The fix is simple, add a check in ext4_resize_begin() to make sure that
the es->s_reserved_gdt_blocks is zero when the resize_inode feature is
disabled.
Cc: stable@kernel.org
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220601092717.763694-1-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
