This follows on the change ("regulator: Set PROBE_PREFER_ASYNCHRONOUS
for drivers that existed in 4.14") but changes regulators didn't exist
in Linux 5.10 but did exist in Linux 5.15.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20230316125351.5.Ia0e6d859bdfe42ea5c187fb1eb4705c1b5ea23a1@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
There are lots of fields in struct hi6421_spmi_pmic that aren't
used. As a matter of fact, only regmap is needed.
So, drop the struct as a whole, and set regmap as the drvdata.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/1828cb783b1ebca0b98bf0b3077d8701adb228f7.1630586862.git.mchehab+huawei@kernel.org
The arrays containing the regulator's voltage ranges are
currently named after the first ldo which uses such range.
However, it sounds a lot clearer if those are named with
the voltage range instead.
No functional changes.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/1bdff1d1f23753b69c8044160decfad1e8553d08.1627121912.git.mchehab+huawei@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Since config.dev = pdev->dev.parent in current code, so
dev_get_drvdata(rdev->dev.parent) actually returns the drvdata of the mfd
device rather than the regulator. Fix it.
Fixes: 9bc146acc3 ("regulator: hi6421v600: Fix setting wrong driver_data")
Reported-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Tested-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/20210630074246.2305166-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current code set "config.driver_data = sreg" but sreg only init the mutex,
the othere fields are just zero. Fix it by pass *info to config.driver_data
so each regulator can get corresponding data by rdev_get_drvdata().
Separate enable_mutex from struct hi6421_spmi_reg_info since only need one
mutex for the driver.
Fixes: d2dfd50a0b ("staging: hikey9xx: hi6421v600-regulator: move LDO config from DT")
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210622043329.392072-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
commit db27f8294c changed eco_mode << (ffs(sreg->eco_mode_mask) - 1)
to sreg->eco_mode_mask << (ffs(sreg->eco_mode_mask) - 1) which is wrong.
Fix it by simply set val = sreg->eco_mode_mask.
In additional, sreg->eco_mode_mask can be 0 (LDO3, LDO33, LDO34).
Return -EINVAL if idle mode is not supported when sreg->eco_mode_mask is 0.
While at it, also use unsigned int for reg_val/val which is the expected
type for regmap_read and regmap_update_bits.
Fixes: db27f8294c ("staging: regulator: hi6421v600-regulator: use shorter names for OF properties")
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210619123423.4091429-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
All the voltage tables have entries in ascendant order, so use
regulator_map_voltage_ascend to speed up the mapping.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210610134128.2477821-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A collection of fixes for the regulator API that have come up since the
merge window, including a big batch of fixes from Axel Lin's usual
careful and detailed review. The one stand out fix here is Dmitry
Baryshkov's fix for an issue where we fail to power on the parents of
always on regulators during system startup if they weren't already
powered on.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmC/ao0ACgkQJNaLcl1U
h9AoqQf9GYtljFSON07MAOWwMgnjuMQ+rl0ZadqKKzq74QMMi4bxVKDWkftQ28/5
Ulk2M/mxRE6C1OEpOJl9ZnG9K0fWpOdnTURkYgW0FsJniEDiF7ZkdoFypwu93jOD
0r+3QCw/Ti9i08pOdlpFpUKU5rp/O9HYmouOTzBOCiM1SMb9TkkX5GBoDVw8+cWd
2PZqKQXEsaK1uNzeaXYw6UO8+IdSpVQRzSEILdtVWyHCNmXDDJWfI3vYeeqDbhYr
C+E3UdrO1ftNsOoJv33NqhscMnulkZDZ6H6lgbLX2FyFAe2M9N+AildGlkR5H1GD
xH3q3EvkOE2Y2X3zHteLdJ3MoI91cQ==
=poWJ
-----END PGP SIGNATURE-----
Merge tag 'regulator-fix-v5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A collection of fixes for the regulator API that have come up since
the merge window, including a big batch of fixes from Axel Lin's usual
careful and detailed review.
The one stand out fix here is Dmitry Baryshkov's fix for an issue
where we fail to power on the parents of always on regulators during
system startup if they weren't already powered on"
* tag 'regulator-fix-v5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (21 commits)
regulator: rt4801: Fix NULL pointer dereference if priv->enable_gpios is NULL
regulator: hi6421v600: Fix .vsel_mask setting
regulator: bd718x7: Fix the BUCK7 voltage setting on BD71837
regulator: atc260x: Fix n_voltages and min_sel for pickable linear ranges
regulator: rtmv20: Fix to make regcache value first reading back from HW
regulator: mt6315: Fix function prototype for mt6315_map_mode
regulator: rtmv20: Add Richtek to Kconfig text
regulator: rtmv20: Fix .set_current_limit/.get_current_limit callbacks
regulator: hisilicon: use the correct HiSilicon copyright
regulator: bd71828: Fix .n_voltages settings
regulator: bd70528: Fix off-by-one for buck123 .n_voltages setting
regulator: max77620: Silence deferred probe error
regulator: max77620: Use device_set_of_node_from_dev()
regulator: scmi: Fix off-by-one for linear regulators .n_voltages setting
regulator: core: resolve supply for boot-on/always-on regulators
regulator: fixed: Ensure enable_counter is correct if reg_domain_disable fails
regulator: Check ramp_delay_table for regulator_set_ramp_delay_regmap
regulator: fan53880: Fix missing n_voltages setting
regulator: da9121: Return REGULATOR_MODE_INVALID for invalid mode
regulator: fan53555: fix TCS4525 voltage calulation
...
Use rdev->regmap instead of pmic->regmap.
With this change, hi6421_spmi_regulator_disable can be removed and use
regulator_disable_regmap instead.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210430085555.1127994-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
