User space verbs provider library would need chip context. Changing the
ABI to add chip version details in structure. Furthermore, changing the
kernel driver ucontext allocation code to initialize the abi structure
with appropriate values.
As suggested by community, appended the new fields at the bottom of the
ABI structure and retaining to older fields as those were in the older
versions.
Keeping the ABI version at 1 and adding a new field in the ucontext
response structure to hold the component mask. The user space library
should check pre-defined flags to figure out if a certain feature is
supported on not.
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The new 57500 series of adapter has bigger psn search structure. The size
of new structure is 16B. Changing the control path memory allocation and
fast path code to accommodate the new psn structure while maintaining the
backward compatibility.
There are few additional changes listed below:
- For 57500 chip max-sge are limited to 6 for now.
- For 57500 chip max-receive-sge should be set to 6 for now.
- Add driver/hardware interface structure for new chip.
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In the new 57500 series of adapters the GSI qp is a UD type QP unlike the
previous generation where it was a Raw Eth QP. Changing the control and
data path to support the same. Listing all the significant diffs:
- AH creation resolve network type unconditionally
- Add check at relevant places to distinguish from Raw Eth
processing flow.
- bnxt_re_process_res_ud_wc report completion with GRH flag
when qp is GSI.
- Change length, cfa_meta and smac to match new driver/hardware
interface.
- Add new driver/hardware interface.
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The backing store to keep HW context data structures is allocated and
initialized by L2 driver. For 57500 chip RoCE driver do not require to
allocate and initialize additional memory. Changing to skip duplicate
allocation and initialization for 57500 adapters. Driver continues as
before for older chips.
This patch also takes care of stats context memory alignment to 128
boundary, a requirement for 57500 series of chip. Older chips do not care
of alignment, thus the change is unconditional.
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The new chip series has 64 bit doorbell for notification queues. Thus,
both control and data path event queues need new routines to write 64 bit
doorbell. Adding the same. There is new doorbell interface between the
chip and driver. Changing the chip specific data structure definitions.
Additional significant changes are listed below
- bnxt_re_net_ring_free/alloc takes a new argument
- bnxt_qplib_enable_nq and enable_rcfw uses new doorbell offset
for new chip.
- DB mapping for NQ and CREQ now maps 8 bytes.
- DBR_DBR_* macros renames to DBC_DBC_*
- store nq_db_offset in a 32bit data type.
- got rid of __iowrite64_copy, used writeq instead.
- changed the DB header initialization to simpler scheme.
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Adding setup and destroy routines for chip-context. The chip context would
be used frequently in control and data path to take execution flow
depending on the chip type. chip context structure pointer is added to
the relevant data structures.
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Use is_power_of_2() instead of hard coding it in the driver. While at it,
fix the meaningless error print.
Signed-off-by: Gal Pressman <galpress@amazon.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
ib_umem_get() uses gup_longterm() and relies on the lock to stabilze the
vma_list, so we cannot really get rid of mmap_sem altogether, but now that
the counter is atomic, we can get of some complexity that mmap_sem brings
with only pinned_vm.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
usnic_uiom_get_pages() uses gup_longterm() so we cannot really get rid of
mmap_sem altogether in the driver, but we can get rid of some complexity
that mmap_sem brings with only pinned_vm. We can get rid of the wq
altogether as we no longer need to defer work to unpin pages as the
counter is now atomic. We also share the lock.
Acked-by: Parvi Kaustubhi <pkaustub@cisco.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This driver already uses gup_fast() and thus we can just drop the mmap_sem
protection around the pinned_vm counter. Note that the window between when
hfi1_can_pin_pages() is called and the actual counter is incremented
remains the same as mmap_sem was _only_ used for when ->pinned_vm was
touched.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Davidlohr Bueso <dbueso@suse.det>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The driver uses mmap_sem for both pinned_vm accounting and
get_user_pages(). Because rdma drivers might want to use gup_longterm() in
the future we still need some sort of mmap_sem serialization (as opposed
to removing it entirely by using gup_fast()). Now that pinned_vm is atomic
the writer lock can therefore be converted to reader.
This also fixes a bug that __qib_get_user_pages was not taking into
account the current value of pinned_vm.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Taking a sleeping lock to _only_ increment a variable is quite the
overkill, and pretty much all users do this. Furthermore, some drivers
(ie: infiniband and scif) that need pinned semantics can go to quite
some trouble to actually delay via workqueue (un)accounting for pinned
pages when not possible to acquire it.
By making the counter atomic we no longer need to hold the mmap_sem and
can simply some code around it for pinned_vm users. The counter is 64-bit
such that we need not worry about overflows such as rdma user input
controlled from userspace.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Christoph Lameter <cl@linux.com>
Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Move the iwpm kdoc comments from the prototype declarations to above
the function bodies. There are no functional changes in this patch.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Netlink statistics exported by rdma-cm never had any working user space
component published to the mailing list or to any open source
project. Canvassing various proprietary users, and the original requester,
we find that there are no real users of this interface.
This patch simply removes all occurrences of RDMA CM netlink in favour of
modern nldev implementation, which provides the same information and
accompanied by widely used user space component.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Avoid that sparse reports the following for the mlx5 driver:
drivers/infiniband/hw/mlx5/qp.c:2671:34: warning: invalid assignment: |=
drivers/infiniband/hw/mlx5/qp.c:2671:34: left side has type restricted __be32
drivers/infiniband/hw/mlx5/qp.c:2671:34: right side has type int
drivers/infiniband/hw/mlx5/qp.c:2679:34: warning: invalid assignment: |=
drivers/infiniband/hw/mlx5/qp.c:2679:34: left side has type restricted __be32
drivers/infiniband/hw/mlx5/qp.c:2679:34: right side has type int
drivers/infiniband/hw/mlx5/qp.c:2680:34: warning: invalid assignment: |=
drivers/infiniband/hw/mlx5/qp.c:2680:34: left side has type restricted __be32
drivers/infiniband/hw/mlx5/qp.c:2680:34: right side has type int
drivers/infiniband/hw/mlx5/qp.c:2684:34: warning: invalid assignment: |=
drivers/infiniband/hw/mlx5/qp.c:2684:34: left side has type restricted __be32
drivers/infiniband/hw/mlx5/qp.c:2684:34: right side has type int
drivers/infiniband/hw/mlx5/qp.c:2686:28: warning: cast from restricted __be32
drivers/infiniband/hw/mlx5/qp.c:2686:28: warning: incorrect type in argument 1 (different base types)
drivers/infiniband/hw/mlx5/qp.c:2686:28: expected unsigned int [usertype] val
drivers/infiniband/hw/mlx5/qp.c:2686:28: got restricted __be32 [usertype]
drivers/infiniband/hw/mlx5/qp.c:2686:28: warning: cast from restricted __be32
drivers/infiniband/hw/mlx5/qp.c:2686:28: warning: cast from restricted __be32
drivers/infiniband/hw/mlx5/qp.c:2686:28: warning: cast from restricted __be32
drivers/infiniband/hw/mlx5/qp.c:2686:28: warning: cast from restricted __be32
This patch does not change any functionality.
Fixes: a60109dc9a ("IB/mlx5: Add support for extended atomic operations")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
A soft iwarp driver that uses the host TCP stack via a kernel mode socket
does not need port mapping. In fact, if the port map daemon, iwpmd, is
running, then iwpmd must not try and create/bind a socket to the actual
port for a soft iwarp connection, since the driver already has that socket
bound.
Yet if the soft iwarp driver wants to interoperate with hard iwarp devices
that -are- using port mapping, then the soft iwarp driver's mappings still
need to be maintained and advertised by the iwpm protocol.
This patch enhances the rdma driver<->iwcm interface to allow an iwarp
driver to specify that it does not want port mapping. The iwpm
kernel<->iwpmd interface is also enhanced to pass up this information on
map requests.
Care is taken to interoperate with the current iwpmd version (ABI version
3) and only use the new NL attributes if iwpmd supports ABI version 4.
The ABI version define has also been created in rdma_netlink.h so both
kernel and user code can share it. The iwcm and iwpmd negotiate the ABI
version to use with a new HELLO netlink message.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In order to add new IWPM_NL attributes, the enums for the IWPM commands
attributes are refactored such that a new attribute can be added without
breaking ABI version 3. Instead of sharing nl attribute enums for both
request and response messages, we create separate enums for each IWPM
message request and reply. This allows us to extend any given IWPM
message by adding new attributes for just that message. These new enums
are created, though, in a way to avoid breaking ABI version 3.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
So future additions to that struct get initialized by default.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
On hi08 chip, There is a possibility of chip hanging when sending doorbell
during reset. We can fix it by prohibiting doorbell during reset.
Fixes: 2d40788825 ("RDMA/hns: Add support for processing send wr and receive wr")
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
On hi08 chip, There is a possibility of chip hanging and some errors when
sending mailbox & doorbell during reset. We can fix it by prohibiting
mailbox and doorbell during reset and reset occurred to ensure that
hardware can work normally.
Fixes: a04ff739f2 ("RDMA/hns: Add command queue support for hip08 RoCE driver")
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In the reset process, the hns3 NIC driver notifies the RoCE driver to
perform reset related processing by calling the .reset_notify() interface
registered by the RoCE driver in hip08 SoC.
In the current version, if a reset occurs simultaneously during the
execution of rmmod or insmod ko, there may be Oops error as below:
Internal error: Oops: 86000007 [#1] PREEMPT SMP
Modules linked in: hns_roce(O) hns3(O) hclge(O) hnae3(O) [last unloaded: hns_roce_hw_v2]
CPU: 0 PID: 14 Comm: kworker/0:1 Tainted: G O 4.19.0-ge00d540 #1
Hardware name: Huawei Technologies Co., Ltd.
Workqueue: events hclge_reset_service_task [hclge]
pstate: 60c00009 (nZCv daif +PAN +UAO)
pc : 0xffff00000100b0b8
lr : 0xffff00000100aea0
sp : ffff000009afbab0
x29: ffff000009afbab0 x28: 0000000000000800
x27: 0000000000007ff0 x26: ffff80002f90c004
x25: 00000000000007ff x24: ffff000008f97000
x23: ffff80003efee0a8 x22: 0000000000001000
x21: ffff80002f917ff0 x20: ffff8000286ea070
x19: 0000000000000800 x18: 0000000000000400
x17: 00000000c4d3225d x16: 00000000000021b8
x15: 0000000000000400 x14: 0000000000000400
x13: 0000000000000000 x12: ffff80003fac6e30
x11: 0000800036303000 x10: 0000000000000001
x9 : 0000000000000000 x8 : ffff80003016d000
x7 : 0000000000000000 x6 : 000000000000003f
x5 : 0000000000000040 x4 : 0000000000000000
x3 : 0000000000000004 x2 : 00000000000007ff
x1 : 0000000000000000 x0 : 0000000000000000
Process kworker/0:1 (pid: 14, stack limit = 0x00000000af8f0ad9)
Call trace:
0xffff00000100b0b8
0xffff00000100b3a0
hns_roce_init+0x624/0xc88 [hns_roce]
0xffff000001002df8
0xffff000001006960
hclge_notify_roce_client+0x74/0xe0 [hclge]
hclge_reset_service_task+0xa58/0xbc0 [hclge]
process_one_work+0x1e4/0x458
worker_thread+0x40/0x450
kthread+0x12c/0x130
ret_from_fork+0x10/0x18
Code: bad PC value
In the reset process, we will release the resources firstly, and after the
hardware reset is completed, we will reapply resources and reconfigure the
hardware.
We can solve this problem by modifying both the NIC and the RoCE
driver. We can modify the concurrent processing in the NIC driver to avoid
calling the .reset_notify and .uninit_instance ops at the same time. And
we need to modify the RoCE driver to record the reset stage and the
driver's init/uninit state, and check the state in the .reset_notify,
.init_instance. and uninit_instance functions to avoid NULL pointer
operation.
Fixes: cb7a94c9c8 ("RDMA/hns: Add reset process for RoCE in hip08")
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Currently a packet is marked for loopback only if the source and
destination addresses equals. This is not enough when multiple gids are
present in rxe device's gid table and the traffic is from one gid to
another. Fix it by marking the packet for loopback if the destination MAC
address is equal to the source MAC address.
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Tested-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Move the function rxe_init_av() to rxe_av.c file and use it instead of
calling rxe_av_from_attr() and rxe_av_fill_ip_info(), also remove the
unused rxe_dev parameter from rxe_init_av().
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Fixes the following sparse warnings:
drivers/infiniband/hw/hns/hns_roce_hw_v2.c:5822:5: warning:
symbol 'hns_roce_v2_query_srq' was not declared. Should it be static?
drivers/infiniband/hw/hns/hns_roce_srq.c:158:6: warning:
symbol 'hns_roce_srq_free' was not declared. Should it be static?
drivers/infiniband/hw/hns/hns_roce_srq.c:81:5: warning:
symbol 'hns_roce_srq_alloc' was not declared. Should it be static?
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAlxXYaEeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGkSQH/2yrfnviNPFYpZOR
QQdc71Bfhkd8m85SmWIsSebkxmi3hKFVj15sGbWXd6+0/VxjEEGvQCZpvVwJceke
LwDxtkKGg/74wAqJvlSAWxFNZ+Had4jDeoSoeQChddsBVXBBCxQx2v6ECg3o2x7W
k8Z8t4+3RijDf8fYXY9ETyO2zW8R/wgT+dnl+DPgUH7u4dxh7FzAUfc4bgZIDg+i
FzBQfbTJuz4BU7uRZ9IJiwhWKv0Iyi2DR3BY8Z1pqEpRaUMJMrCs2WGytHbTgt9e
0EtO1airbVneU4eumU/ZaF9cyEbah9HousEPnP7J09WG4s/Odxc4zE+uK1QqS2im
5Xv88is=
=dVd1
-----END PGP SIGNATURE-----
Merge tag 'v5.0-rc5' into rdma.git for-next
Linux 5.0-rc5
Needed to merge the include/uapi changes so we have an up to date
single-tree for these files. Patches already posted are also expected to
need this for dependencies.
Keeping single line wrapper functions is not useful. Hence remove the
ib_sg_dma_address() and ib_sg_dma_len() functions. This patch does not
change any functionality.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Query all per transport caps for XRC and set the appropriate bits in the
per transport field of the advertised struct.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
ODP support in SRQ is per transport capability. Based on device
capabilities set this flag in device structure for future queries.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add changes to the WQE page-fault handler to
1. Identify that the event is for a SRQ WQE
2. Pass SRQ object instead of a QP to the function that reads the WQE
3. Parse the SRQ WQE with respect to its structure
The rest is handled as for regular RQ WQE.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reading a WQE from SRQ is almost identical to reading from regular RQ.
The differences are the size of the queue, the size of a WQE and buffer
location.
Make necessary changes to mlx5_ib_read_user_wqe() to let it read a WQE
from a SRQ or RQ by caller choice.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Skip XRC segment in the beginning of a send WQE and fetch ODP XRC
capabilities when QP type is IB_QPT_XRC_INI. The rest of the handling is
the same as in RC QP.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In the function mlx5_ib_mr_responder_pfault_handler()
1. The parameter wqe is used as read-only so there is no need to pass it
by reference.
2. Remove the unused argument pfault from list of arguments.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When handling an ODP event for a receive WQE in SRQ the target QP is
unknown. Therefore, it is wrong to ask if QP has a SRQ in the page-fault
handler.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Expose XRC ODP capabilities as part of the extended device capabilities.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
QP and SRQ objects are stored in different containers so the action to get
and lock a common resource during ODP event needs to address that.
While here get rid of 'refcount' and 'free' fields in mlx5_core_srq struct
and use the fields with same semantics in common structure.
Fixes: 032080ab43 ("IB/mlx5: Lock QP during page fault handling")
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/infiniband/hw/hns/hns_roce_hw_v2.c: In function 'hns_roce_v2_qp_flow_control_init':
drivers/infiniband/hw/hns/hns_roce_hw_v2.c:4384:33: warning:
variable 'rst' set but not used [-Wunused-but-set-variable]
It never used since introduction.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
As preparation to hide rdma_restrack_root, refactor the code to use the
ops structure instead of a special callback which is hidden in
rdma_restrack_root.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Since we already know if we are user/kernel before calling restrack_add,
move type dependent code into the callers to make the flow more readable.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In the current implementation, we have one restrack root per-device and
all users are simply providing it directly. Let's simplify the interface
and have callers provide the ib_device and internally access the
restrack_root.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The .doit callbacks don't have a netlink_callback to check capabilities so
in order to use the same fill_res_func for both .dump and .doit, we need
to do the capability check outside of those functions.
For .doit callbacks, it is possible to check CAP_NET_ADMIN directly on the
received sk_buff.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The PID namespace is going to be used in the .doit callback, so generalize
its implementation.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There is no need to manually write same callbacks, automatically generate
them using C-macro language.
This macro is going to be extended to generate doit callbacks too, so use
general name for this macro.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When a given netdev of the GID entry is macvlan netdevice, and if the
lower netdevice is vlan device, GID entry for macvlan based IP address
needs to inherit the vlan of the lower netdevice.
Therefore, attempt to find out if the lower device exist and if so, if
it is vlan device and setup the vlan tag correctly.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Yuval Avnery <yuvalav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Lack of mandatory verbs no longer fail device registration, the device
will be marked as a non-kverbs provider.
Signed-off-by: Gal Pressman <galpress@amazon.com>
Tested-by: Parvi Kaustubhi <pkaustub@cisco.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Drivers that do not provide kernel verbs support should not be used by ib
kernel clients at all.
In case a device does not implement all mandatory verbs for kverbs usage
mark it as a non kverbs provider and prevent its usage for all clients
except for uverbs.
The device is marked as a non kverbs provider using the 'kverbs_provider'
flag which should only be set by the core code. The clients can choose
whether kverbs are requested for its usage using the 'no_kverbs_req' flag
which is currently set for uverbs only.
This patch allows drivers to remove mandatory verbs stubs and simply set
the callbacks to NULL. The IB device will be registered as a non-kverbs
provider. Note that verbs that are required for the device registration
process must be implemented.
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
All callers to ib_alloc_device() provide a larger size than struct
ib_device and rely on the fact that struct ib_device is embedded in their
driver specific structure as the first member.
Provide a safer variant of ib_alloc_device() that checks and enforces this
approach to make sure the drivers are using it right.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Remove 'del_mkey' variable that is set but not used.
Fixes: 534fd7aac5 ("IB/mlx5: Manage indirection mkey upon DEVX flow for ODP")
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The function mlx5_ib_stage_odp_cleanup() is only used in main.c
Fixes: d5d284b829 ("{net,IB}/mlx5: Move Page fault EQ and ODP logic to RDMA")
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The default behavior of the SCSI core is to set the block layer request
queue parameter max_segment_size to 64 KB. That means that elements of
scatterlists are limited to 64 KB. Since RDMA adapters support larger
sizes, increase max_segment_size for the SRP initiator.
Notes:
- The SCSI max_segment_size parameter was introduced in kernel v5.0. See
also commit 50c2e9107f ("scsi: introduce a max_segment_size
host_template parameters").
- Some other block drivers already set max_segment_size to UINT_MAX,
e.g. nbd and rbd.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Several locations for manipulating sges use an open coded sequence
that is covered by helper functions.
Use the appropriate helper functions.
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
