This patch updates dev_pm_opp_find_freq_*() routines to get a reference
to the OPPs returned by them.
Also updates the users of dev_pm_opp_find_freq_*() routines to call
dev_pm_opp_put() after they are done using the OPPs.
As it is guaranteed the that OPPs wouldn't get freed while being used,
the RCU read side locking present with the users isn't required anymore.
Drop it as well.
This patch also updates all users of devfreq_recommended_opp() which was
returning an OPP received from the OPP core.
Note that some of the OPP core routines have gained
rcu_read_{lock|unlock}() calls, as those still use RCU specific APIs
within them.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> [Devfreq]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Use the builtin_platform_driver() macro to make the code simpler.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
The Kconfig currently controlling compilation of this code is:
arch/arm/mach-tegra/Kconfig:config ARCH_TEGRA_124_SOC
arch/arm/mach-tegra/Kconfig: bool "Enable support for Tegra124 family"
...meaning that it currently is not being built as a module by anyone.
Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.
Since module_init translates to device_initcall in the non-modular
case, the init ordering remains unchanged with this commit.
Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.
We also delete the MODULE_LICENSE tags etc. since all that information
is already contained at the top of the file in the comments.
Cc: Peter De Schrijver <pdeschrijver@nvidia.com>
Cc: Prashant Gaikwad <pgaikwad@nvidia.com>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Aleksandr Frid <afrid@nvidia.com>
Cc: Paul Walmsley <pwalmsley@nvidia.com>
Cc: linux-clk@vger.kernel.org
Cc: linux-tegra@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Adjust variables to correspond to the names used in the parameter list of
the function. Move the struct device * variable up to the place where it
appears in the parameter list.
Issue detected using Coccinelle (http://coccinelle.lip6.fr/)
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Tegra114 has a HW bug that the PLLD/PLLD2 lock bit cannot be asserted when
the DIS power domain is during up-powergating process but the clamp to this
domain is not removed yet. That causes a timeout and aborts the power
sequence, although the PLLD/PLLD2 has already locked. To remove the false
alarm, we don't use the lock for PLLD/PLLD2. Just wait 1ms and treat the
clocks as locked.
Signed-off-by: Vince Hsu <vinceh@nvidia.com>
Tested-by: Jonathan Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Move the UTMI PLL initialization code form clk-tegra<chip>.c files into
clk-pll.c. UTMI PLL was being configured and set in HW control right
after registration. However, when the clock init_table is processed and
child clks of PLLU are enabled, it will call in and enable PLLU as
well, and initiate SW enabling sequence even though PLLU is already in
HW control. This leads to getting UTMIPLL stuck with a SEQ_BUSY status.
Doing the initialization once during pllu_enable means we configure it
properly into HW control.
A side effect of the commonization/localization of the UTMI PLL init
code, is that it corrects some errors that were present for earlier
generations. For instance, in clk-tegra124.c, it used to have:
#define UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(x) (((x) & 0x1f) << 6)
when the correct shift to use is present in the new version:
#define UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(x) (((x) & 0x1f) << 27)
which matches the Tegra124 TRM register definition.
Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
[rklein: Merged in some later fixes for potential deadlocks]
Signed-off-by: Rhyland Klein <rklein@nvidia.com>
[treding: coding style bike-shedding, remove unused variable]
Signed-off-by: Thierry Reding <treding@nvidia.com>
sor_safe being the parent of the dpaux and dpaux1 clocks, it's not only
natural, but also slightly more efficient, to initialize it before its
children. This avoids orphaning the dpaux and dpaux1 clocks only to get
them reparented when the sor_safe clock is registered.
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Rhyland Klein <rklein@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
It turns out that sor_safe, rather than pll_p, is the parent of the
dpaux and dpaux1 clocks.
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Rhyland Klein <rklein@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The timer clock feeds the timer block, which, among other things, is
used to drive the SOR lane sequencer. Since the Tegra timer driver is
not enabled on 64-bit ARM, nothing currently claims that clock and it
gets disabled by the common clock framework at late_init time.
Given the non-obvious dependencies, the timer clock can be considered
a critical part of the SoC infrastructure, requiring its clock source
to be always on.
Acked-by: Rhyland Klein <rklein@nvidia.com>
Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Make the sor1 and sor1_src clocks available on Tegra210. They will be
used by the display driver to support HDMI and DP.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The sor1 clock on Tegra210 is structured in the following way:
+-------+
| pllp |---+
+-------+ | +--------------+ +-----------+
+----| | | sor_safe |
+-------+ | | +-----------+
| plld |--------| | |
+-------+ | | +-----------+
| sor1_src |-------| |
+-------+ | | +-----------+
| plld2 |--------| | |
+-------+ | | |
+----| | |
+-------+ | +--------------+ |
| clkm |---+ +-----------+
+-------+ +--------------+ | |
| sor1_brick |-------| sor1 |
+--------------+ | |
+-----------+
This is impractical to represent in a clock tree, though, because there
is no name for the mux that has sor_safe and sor1_src as parents. It is
also much more cumbersome to deal with the additional mux because users
of these clocks (the display driver) would have to juggle with an extra
mux for no real reason.
To simply things, the above is squashed into two muxes instead, so that
it looks like this:
+-------+
| pllp |---+
+-------+ | +--------------+ +-----------+
+----| | | sor_safe |
+-------+ | | +-----------+
| plld |--------| | |
+-------+ | | +-----------+
| sor1_src |-------| sor1 |
+-------+ | | +-----------+
| plld2 |--------| | | |
+-------+ | | | |
+----| | | |
+-------+ | +--------------+ | |
| clkm |---+ | |
+-------+ +--------------+ | |
| sor1_brick |-----------+---+
+--------------+
This still very accurately represents the hardware. Note that sor1 has
sor1_brick as input twice, that's because bit 1 in the mux selects the
sor1_brick irrespective of bit 0.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Enabling spread spectrum on pll_d2 can lead to issues with display
modes. HDMI monitors, for example, would report "Signal Error" and
some modes driven over DisplayPort would generate fuzzy horizontal
bands.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Commit 86c679a522 ("clk: tegra: pll: Fix _pll_ramp_calc_pll logic and
_calc_dynamic_ramp_rate") changed the PLL divider computation logic to
consistently use P-divider values from tables as real dividers rather
than the hardware values. Unfortunately for some reason many of the
Tegra210 clocks didn't have their tables updated (most likely an over-
sight by me when applying the patches). This commit fixes them all up.
Cc: Jon Hunter <jonathanh@nvidia.com>
Cc: Rhyland Klein <rklein@nvidia.com>
Acked-by: Rhyland Klein <rklein@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Most users of IS_ERR_VALUE() in the kernel are wrong, as they
pass an 'int' into a function that takes an 'unsigned long'
argument. This happens to work because the type is sign-extended
on 64-bit architectures before it gets converted into an
unsigned type.
However, anything that passes an 'unsigned short' or 'unsigned int'
argument into IS_ERR_VALUE() is guaranteed to be broken, as are
8-bit integers and types that are wider than 'unsigned long'.
Andrzej Hajda has already fixed a lot of the worst abusers that
were causing actual bugs, but it would be nice to prevent any
users that are not passing 'unsigned long' arguments.
This patch changes all users of IS_ERR_VALUE() that I could find
on 32-bit ARM randconfig builds and x86 allmodconfig. For the
moment, this doesn't change the definition of IS_ERR_VALUE()
because there are probably still architecture specific users
elsewhere.
Almost all the warnings I got are for files that are better off
using 'if (err)' or 'if (err < 0)'.
The only legitimate user I could find that we get a warning for
is the (32-bit only) freescale fman driver, so I did not remove
the IS_ERR_VALUE() there but changed the type to 'unsigned long'.
For 9pfs, I just worked around one user whose calling conventions
are so obscure that I did not dare change the behavior.
I was using this definition for testing:
#define IS_ERR_VALUE(x) ((unsigned long*)NULL == (typeof (x)*)NULL && \
unlikely((unsigned long long)(x) >= (unsigned long long)(typeof(x))-MAX_ERRNO))
which ends up making all 16-bit or wider types work correctly with
the most plausible interpretation of what IS_ERR_VALUE() was supposed
to return according to its users, but also causes a compile-time
warning for any users that do not pass an 'unsigned long' argument.
I suggested this approach earlier this year, but back then we ended
up deciding to just fix the users that are obviously broken. After
the initial warning that caused me to get involved in the discussion
(fs/gfs2/dir.c) showed up again in the mainline kernel, Linus
asked me to send the whole thing again.
[ Updated the 9p parts as per Al Viro - Linus ]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.org/lkml/2016/1/7/363
Link: https://lkml.org/lkml/2016/5/27/486
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> # For nvmem part
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
do have a couple core changes in here as well.
Core:
- CLK_IS_CRITICAL support has been added. This should allow drivers
to properly express that a certain clk should stay on even if
their prepare/enable count drops to 0 (and in turn the parents of
these clks should stay enabled).
- A clk registration API has been added, clk_hw_register(), and
an OF clk provider API has been added, of_clk_add_hw_provider().
These APIs have been put in place to further split clk providers
from clk consumers, with the goal being to have clk providers
never deal with struct clk pointers at all. Conversion of provider
drivers is on going. clkdev has also gained support for registering
clk_hw pointers directly so we can convert drivers that don't use
devicetree.
New Drivers:
- Marvell ap806 and cp110 system controllers (with clks inside!)
- Hisilicon Hi3519 clock and reset controller
- Axis ARTPEC-6 clock controllers
- Oxford Semiconductor OXNAS clock controllers
- AXS10X I2S PLL
- Rockchip RK3399 clock and reset controller
Updates:
- MMC2 and UART2 clks on Samsung Exynos 3250, ACLK on Samsung Exynos 542x
SoCs, and some more clk ID exporting for bus frequency scaling
- Proper BCM2835 PCM clk support and various other clks
- i.MX clk updates for i.MX6SX, i.MX7, and VF610
- Renesas updates for R-Car H3
- Tegra210 got updates for DisplayPort and HDMI 2.0
- Rockchip driver refactorings and fixes due to adding RK3399 support
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=aEzb
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"It's the usual big pile of driver updates and additions, but we do
have a couple core changes in here as well.
Core:
- CLK_IS_CRITICAL support has been added. This should allow drivers
to properly express that a certain clk should stay on even if their
prepare/enable count drops to 0 (and in turn the parents of these
clks should stay enabled).
- A clk registration API has been added, clk_hw_register(), and an OF
clk provider API has been added, of_clk_add_hw_provider(). These
APIs have been put in place to further split clk providers from clk
consumers, with the goal being to have clk providers never deal
with struct clk pointers at all. Conversion of provider drivers is
on going. clkdev has also gained support for registering clk_hw
pointers directly so we can convert drivers that don't use
devicetree.
New Drivers:
- Marvell ap806 and cp110 system controllers (with clks inside!)
- Hisilicon Hi3519 clock and reset controller
- Axis ARTPEC-6 clock controllers
- Oxford Semiconductor OXNAS clock controllers
- AXS10X I2S PLL
- Rockchip RK3399 clock and reset controller
Updates:
- MMC2 and UART2 clks on Samsung Exynos 3250, ACLK on Samsung Exynos
542x SoCs, and some more clk ID exporting for bus frequency scaling
- Proper BCM2835 PCM clk support and various other clks
- i.MX clk updates for i.MX6SX, i.MX7, and VF610
- Renesas updates for R-Car H3
- Tegra210 got updates for DisplayPort and HDMI 2.0
- Rockchip driver refactorings and fixes due to adding RK3399 support"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (139 commits)
clk: fix critical clock locking
clk: qcom: mmcc-8996: Remove clocks that should be controlled by RPM
clk: ingenic: Allow divider value to be divided
clk: sunxi: Add display and TCON0 clocks driver
clk: rockchip: drop old_rate calculation on pll rate changes
clk: rockchip: simplify GRF handling in pll clocks
clk: rockchip: lookup General Register Files in rockchip_clk_init
clk: rockchip: fix the rk3399 sdmmc sample / drv name
clk: mvebu: new driver for Armada CP110 system controller
dt-bindings: arm: add DT binding for Marvell CP110 system controller
clk: mvebu: new driver for Armada AP806 system controller
clk: hisilicon: add CRG driver for hi3519 soc
clk: hisilicon: export some hisilicon APIs to modules
reset: hisilicon: add reset controller driver for hisilicon SOCs
clk: bcm/kona: Do not use sizeof on pointer type
clk: qcom: msm8916: Fix crypto clock flags
clk: nxp: lpc18xx: Initialize clk_init_data::flags to 0
clk/axs10x: Add I2S PLL clock driver
clk: imx7d: fix ahb clock mux 1
clk: fix comment of devm_clk_hw_register()
...
Driver updates for ARM SoCs, these contain various things that touch
the drivers/ directory but got merged through arm-soc for practical
reasons. For the most part, this is now related to power management
controllers, which have not yet been abstracted into a separate
subsystem, and typically require some code in drivers/soc or arch/arm
to control the power domains.
Another large chunk here is a rework of the NVIDIA Tegra USB3.0
support, which was surprisingly tricky and took a long time to
get done.
Finally, reset controller handling as always gets merged through here
as well.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=x+iD
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver updates from Arnd Bergmann:
"Driver updates for ARM SoCs, these contain various things that touch
the drivers/ directory but got merged through arm-soc for practical
reasons.
For the most part, this is now related to power management
controllers, which have not yet been abstracted into a separate
subsystem, and typically require some code in drivers/soc or arch/arm
to control the power domains.
Another large chunk here is a rework of the NVIDIA Tegra USB3.0
support, which was surprisingly tricky and took a long time to get
done.
Finally, reset controller handling as always gets merged through here
as well"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (97 commits)
arm-ccn: Enable building as module
soc/tegra: pmc: Add generic PM domain support
usb: xhci: tegra: Add Tegra210 support
usb: xhci: Add NVIDIA Tegra XUSB controller driver
dt-bindings: usb: xhci-tegra: Add Tegra210 XUSB controller support
dt-bindings: usb: Add NVIDIA Tegra XUSB controller binding
PCI: tegra: Support per-lane PHYs
dt-bindings: pci: tegra: Update for per-lane PHYs
phy: tegra: Add Tegra210 support
phy: Add Tegra XUSB pad controller support
dt-bindings: phy: tegra-xusb-padctl: Add Tegra210 support
dt-bindings: phy: Add NVIDIA Tegra XUSB pad controller binding
phy: core: Allow children node to be overridden
clk: tegra: Add interface to enable hardware control of SATA/XUSB PLLs
drivers: firmware: psci: make two helper functions inline
soc: renesas: rcar-sysc: Add support for R-Car H3 power areas
soc: renesas: rcar-sysc: Add support for R-Car E2 power areas
soc: renesas: rcar-sysc: Add support for R-Car M2-N power areas
soc: renesas: rcar-sysc: Add support for R-Car M2-W power areas
soc: renesas: rcar-sysc: Add support for R-Car H2 power areas
...
This set of patches adds support for the Tegra XUSB pad controller. The
controller provides a set of pads (lanes) that are used for I/O by other
IP blocks within Tegra SoCs (PCIe, SATA and XUSB).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=JRT5
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.7-phy' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers
Merge "phy: tegra: Changes for v4.7-rc1" from Thierry Reding:
This set of patches adds support for the Tegra XUSB pad controller. The
controller provides a set of pads (lanes) that are used for I/O by other
IP blocks within Tegra SoCs (PCIe, SATA and XUSB).
* tag 'tegra-for-4.7-phy' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
phy: tegra: Add Tegra210 support
phy: Add Tegra XUSB pad controller support
dt-bindings: phy: tegra-xusb-padctl: Add Tegra210 support
dt-bindings: phy: Add NVIDIA Tegra XUSB pad controller binding
phy: core: Allow children node to be overridden
clk: tegra: Add interface to enable hardware control of SATA/XUSB PLLs
This set of changes contains a bunch of cleanups and minor fixes along
with some new clocks, mainly on Tegra210, in preparation for supporting
DisplayPort and HDMI 2.0.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=HcjN
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.7-clk' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into clk-next
Pull tegra clk driver changes from Thierry Reding:
This set of changes contains a bunch of cleanups and minor fixes along
with some new clocks, mainly on Tegra210, in preparation for supporting
DisplayPort and HDMI 2.0.
* tag 'tegra-for-4.7-clk' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
clk: tegra: dfll: Reformat CVB frequency table
clk: tegra: dfll: Properly clean up on failure and removal
clk: tegra: dfll: Make code more comprehensible
clk: tegra: dfll: Reference CVB table instead of copying data
clk: tegra: dfll: Update kerneldoc
clk: tegra: Fix PLL_U post divider and initial rate on Tegra30
clk: tegra: Initialize PLL_C to sane rate on Tegra30
clk: tegra: Fix pllre Tegra210 and add pll_re_out1
clk: tegra: Add sor_safe clock
clk: tegra: dpaux and dpaux1 are fixed factor clocks
clk: tegra: Add dpaux1 clock
clk: tegra: Use correct parent for dpaux clock
clk: tegra: Add fixed factor peripheral clock type
clk: tegra: Special-case mipi-cal parent on Tegra114
clk: tegra: Remove trailing blank line
clk: tegra: Constify peripheral clock registers
clk: tegra: Add interface to enable hardware control of SATA/XUSB PLLs
Upon failure to probe the DFLL, the OPP table will not be cleaned up
properly. Fix this and while at it make sure the OPP table will also be
cleared upon driver removal.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Rename some variables and structure fields to make the code more
comprehensible. Also change the prototype of internal functions to be
more in line with the OPP core functions.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Instead of copying parts of the CVB table into a separate structure,
keep track of the selected CVB table and directly reference data from
it.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The kerneldoc for struct tegra_dfll_soc_data is stale. Update it to
match the current structure definition.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The post divider value in the frequency table is wrong as it would lead
to the PLL producing an output rate of 960 MHz instead of the desired
480 MHz. This wasn't a problem as nothing used the table to actually
initialize the PLL rate, but the bootloader configuration was used
unaltered.
If the bootloader does not set up the PLL it will fail to come when used
under Linux. To fix this don't rely on the bootloader, but set the
correct rate in the clock driver.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
If the bootloader does not touch PLL_C it will stay in its reset state,
failing to lock when enabled. This leads to consumers of this clock to
fail probing. Fix this by always programming the PLL with a sane rate,
which allows it to lock, at startup.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Use a new Tegra210 version of the pll_register_pllre function to
allow setting the proper settings for the m and n div fields.
Additionally define PLL_RE_OUT1 on Tegra210.
Signed-off-by: Rhyland Klein <rklein@nvidia.com>
[treding@nvidia.com: define PLLRE_OUT1 register offset]
Signed-off-by: Thierry Reding <treding@nvidia.com>
The sor_safe clock is a fixed factor (1:17) clock derived from pll_p. It
has a gate bit in the peripheral clock registers. While the SOR is being
powered up, sor_safe can be used as the source until the SOR brick can
generate its own clock.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The dpaux (on Tegra124 and Tegra210) and dpaux1 (on Tegra210) are fixed
factor clocks (1:17) and derived from pll_p_out0 (pll_p). They also have
a gate bit in the peripheral clock registers.
Signed-off-by: Thierry Reding <treding@nvidia.com>
This clock is of the same type as dpaux and is added to feed into the
second DPAUX block used in conjunction with SOR1.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Some of the peripheral clocks on Tegra are derived from one of the top-
level PLLs with a fixed factor. Support these clocks by implementing the
->enable() and ->disable() callbacks using the peripheral clock register
banks and the ->recalc_rate() by dividing the parent rate by the fixed
factor.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Starting with Tegra124, the mipi-cal clock uses the 72 MHz clock as its
source. On Tegra114 this clock's parent was clk_m, so it is the one-off
chip.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Trailing blank lines are undesirable (several tools, such as git,
complain about them), so remove it.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The peripheral clock registers are defined in static tables. These
tables never need to be modified at runtime, so they can reside in
read-only memory.
Signed-off-by: Thierry Reding <treding@nvidia.com>
On Tegra210, hardware control of the SATA and XUSB pad PLLs must be
done during the UPHY enable sequence rather than the PLLE enable
sequence. Export functions to do this so that hardware control can
be enabled from the XUSB padctl driver.
Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Signed-off-by: Rhyland Klein <rklein@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This patch fix spelling typos in printk from various part
of the codes.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The rst_ops structure is never modified. Make it const.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
This flag is a no-op now. Remove usage of the flag.
Acked-by: Rhyland Klein <rklein@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Sparse reports the following warnings for structures and functions that
should be declared static:
drivers/clk/tegra/clk-tegra-super-gen4.c:70:35: warning: symbol
'tegra_super_gen_info_gen4' was not declared. Should it be static?
drivers/clk/tegra/clk-tegra-super-gen4.c:96:35: warning: symbol
'tegra_super_gen_info_gen5' was not declared. Should it be static?
drivers/clk/tegra/clk-tegra-super-gen4.c:174:13: warning: symbol
'tegra_super_clk_init' was not declared. Should it be static?
Fix this by making the above static.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Rhyland Klein <rklein@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Sparse reports the following warnings for functions in clk-tegra210.c
that should be declared as static:
drivers/clk/tegra/clk-tegra210.c:460:6: warning: symbol
'tegra210_pllcx_set_defaults' was not declared. Should it be static?
drivers/clk/tegra/clk-tegra210.c:485:6: warning: symbol
'_pllc_set_defaults' was not declared. Should it be static?
drivers/clk/tegra/clk-tegra210.c:490:6: warning: symbol
'_pllc2_set_defaults' was not declared. Should it be static?
drivers/clk/tegra/clk-tegra210.c:495:6: warning: symbol
'_pllc3_set_defaults' was not declared. Should it be static?
drivers/clk/tegra/clk-tegra210.c:500:6: warning: symbol
'_plla1_set_defaults' was not declared. Should it be static?
drivers/clk/tegra/clk-tegra210.c:510:6: warning: symbol
'tegra210_plla_set_defaults' was not declared. Should it be static?
drivers/clk/tegra/clk-tegra210.c:562:6: warning: symbol
'tegra210_plld_set_defaults' was not declared. Should it be static?
drivers/clk/tegra/clk-tegra210.c:701:6: warning: symbol
'tegra210_plld2_set_defaults' was not declared. Should it be static?
drivers/clk/tegra/clk-tegra210.c:709:6: warning: symbol
'tegra210_plldp_set_defaults' was not declared. Should it be static?
drivers/clk/tegra/clk-tegra210.c:722:6: warning: symbol
'tegra210_pllc4_set_defaults' was not declared. Should it be static?
drivers/clk/tegra/clk-tegra210.c:731:6: warning: symbol
'tegra210_pllre_set_defaults' was not declared. Should it be static?
drivers/clk/tegra/clk-tegra210.c:844:6: warning: symbol
'tegra210_pllx_set_defaults' was not declared. Should it be static?
drivers/clk/tegra/clk-tegra210.c:904:6: warning: symbol
'tegra210_pllmb_set_defaults' was not declared. Should it be static?
drivers/clk/tegra/clk-tegra210.c:963:6: warning: symbol
'tegra210_pllp_set_defaults' was not declared. Should it be static?
drivers/clk/tegra/clk-tegra210.c:1025:6: warning: symbol
'tegra210_pllu_set_defaults' was not declared. Should it be static?
drivers/clk/tegra/clk-tegra210.c:1215:15: warning: symbol
'tegra210_clk_adjust_vco_min' was not declared. Should it be static?
Fix this by declaring the above as static.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Rhyland Klein <rklein@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Sparse generates the following warning for the pll_m params structure:
drivers/clk/tegra/clk-tegra210.c:1569:10: warning: Initializer entry
defined twice
drivers/clk/tegra/clk-tegra210.c:1570:10: also defined here
Fix this by correcting the index for the MISC1 register.
Fixes: b31eba5ff3f7 ("clk: tegra: Add support for Tegra210 clocks")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Rhyland Klein <rklein@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The definition, PLLU_BASE_OVERRIDE, for the pll_u OVERRIDE bit is defined
but not used and when the OVERRIDE bit is cleared in tegra210_pll_init()
the code directly uses the bit number. Therefore, use the definition,
PLLU_BASE_OVERRIDE when clearing the OVERRIDE bit.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Rhyland Klein <rklein@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
If the pll_u is not configured by the bootloader, then on kernel boot the
following warning is seen:
clk_pll_wait_for_lock: Timed out waiting for pll pll_u_vco lock
tegra_init_from_table: Failed to enable pll_u_out1
------------[ cut here ]------------
WARNING: at drivers/clk/tegra/clk.c:269
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.4.0-rc4-next-20151214+ #1
Hardware name: NVIDIA Tegra210 P2371 reference board (E.1) (DT)
task: ffffffc0bc0a0000 ti: ffffffc0bc0a8000 task.ti: ffffffc0bc0a8000
PC is at tegra_init_from_table+0x140/0x164
LR is at tegra_init_from_table+0x140/0x164
pc : [<ffffffc0008fee78>] lr : [<ffffffc0008fee78>] pstate: 80000045
sp : ffffffc0bc0abd50
x29: ffffffc0bc0abd50 x28: ffffffc00090b8a8
x27: ffffffc000a06000 x26: ffffffc0bc019780
x25: ffffffc00086a708 x24: ffffffc00086a790
x23: ffffffc0006d7188 x22: ffffffc0bc010000
x21: 000000000000016e x20: ffffffc0bc00d100
x19: ffffffc000944178 x18: 0000000000000007
x17: 000000000000000e x16: 0000000000000001
x15: 0000000000000007 x14: 000000000000000e
x13: 0000000000000013 x12: 000000000000001a
x11: 000000000000004d x10: 0000000000000750
x9 : ffffffc0bc0a8000 x8 : ffffffc0bc0a07b0
x7 : 0000000000000001 x6 : 0000000002d5f0f8
x5 : 0000000000000000 x4 : 0000000000000000
x3 : 0000000000000002 x2 : ffffffc000996724
x1 : 0000000000000000 x0 : 0000000000000032
---[ end trace cbd20ae519e92ced ]---
Call trace:
[<ffffffc0008fee78>] tegra_init_from_table+0x140/0x164
[<ffffffc000900ac8>] tegra210_clock_apply_init_table+0x20/0x28
[<ffffffc0008fec40>] tegra_clocks_apply_init_table+0x18/0x24
[<ffffffc00008291c>] do_one_initcall+0x90/0x194
[<ffffffc0008cfab0>] kernel_init_freeable+0x148/0x1e8
[<ffffffc000636bb0>] kernel_init+0x10/0xdc
[<ffffffc000085cd0>] ret_from_fork+0x10/0x40
clk_pll_wait_for_lock: Timed out waiting for pll pll_u_vco lock
tegra_init_from_table: Failed to enable pll_u_out2
------------[ cut here ]------------
pll_u can be either controlled by software or hardware and this is
selected via the OVERRIDE bit in the pll_u base register. In the function
tegra210_pll_init(), the OVERRIDE bit for pll_u is cleared, which selects
hardware control of the pll. However, at the same time the pll_u clocks
are populated in the init_table for tegra210 and so software will try to
configure the pll_u if it is not already configured and hence, the above
warning is seen when the pll fails to lock. Remove the pll_u clocks from
the init_table so that software does not try to configure this pll on
boot.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Rhyland Klein <rklein@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The EMC clock sources for Tegra210 currently incorrectly include pll_c2
and pll_c3. However, both of these should have been pll_mb as shown in
the TRM. If Tegra210 happens to be configured such that the pll_mb is the
default clock for the EMC, as configured by the bootloader, then this will
cause a system hang on boot. This is because the kernel will disable the
pll_mb when disabling unused clock as it appears to be unused when it is
not.
Also add the additional pll_p clock source for the EMC.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Rhyland Klein <rklein@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The APB2APE clock for the audio subsystem is required for powering up the
audio power domain and accessing the various modules in this subsystem on
Tegra210 devices. Add this clock for Tegra210.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
for_each_child_of_node() performs an of_node_get() on each iteration, so
before breaking out of the loop an of_node_put() is required.
Found using Coccinelle. The semantic patch used for this is as follows:
// <smpl>
@@
expression e;
local idexpression child;
@@
for_each_child_of_node(root, child) {
... when != of_node_put(child)
when != e = child
(
return child;
|
+ of_node_put(child);
? return ...;
)
...
}
// </smpl>
Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The PLLE SS coefficients are different between Tegra210 and Tegra114.
Add SoC generation specific versions for Tegra114 and Tegra210 and use
them in their respective ->enable() callbacks.
Signed-off-by: Mark Kuo <mkuo@nvidia.com>
Signed-off-by: Rhyland Klein <rklein@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
While enabling PLLE on both Tegra114 and Tegra210, we should be clearing
PLLE_MISC_VREG_BG_CTRL_MASK and PLLE_MISC_VREG_CTRL_MASK not setting
them. This patch fixes both places where we incorrectly set instead of
cleared those bits.
Signed-off-by: Rhyland Klein <rklein@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Software should not disable PLLE if PLLE is already put under hardware
control.
Signed-off-by: Mark Kuo <mkuo@nvidia.com>
Signed-off-by: Rhyland Klein <rklein@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The logic for calculating the input rate used when figuring out the
proper dynamic steps for pllx was incorrect. It is supposed to be
calculated using parent_rate / m but it was just using the parent rate
directly, therefore using the wrong step values.
Signed-off-by: Rhyland Klein <rklein@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
