Here are 3 SPDX patches for 5.7-rc1.
One fixes up the SPDX tag for a single driver, while the other two go
through the tree and add SPDX tags for all of the .gitignore files as
needed.
Nothing too complex, but you will get a merge conflict with your current
tree, that should be trivial to handle (one file modified by two things,
one file deleted.)
All 3 of these have been in linux-next for a while, with no reported
issues other than the merge conflict.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXodg5A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykySQCgy9YDrkz7nWq6v3Gohl6+lW/L+rMAnRM4uTZm
m5AuCzO3Azt9KBi7NL+L
=2Lm5
-----END PGP SIGNATURE-----
Merge tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx
Pull SPDX updates from Greg KH:
"Here are three SPDX patches for 5.7-rc1.
One fixes up the SPDX tag for a single driver, while the other two go
through the tree and add SPDX tags for all of the .gitignore files as
needed.
Nothing too complex, but you will get a merge conflict with your
current tree, that should be trivial to handle (one file modified by
two things, one file deleted.)
All three of these have been in linux-next for a while, with no
reported issues other than the merge conflict"
* tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx:
ASoC: MT6660: make spdxcheck.py happy
.gitignore: add SPDX License Identifier
.gitignore: remove too obvious comments
- Introduce 'zero_page_range' as a dax operation. This facilitates
filesystem-dax operation without a block-device.
- Advertise a persistence-domain for of_pmem and papr_scm. The
persistence domain indicates where cpu-store cycles need to reach in
the platform-memory subsystem before the platform will consider them
power-fail protected.
- Fixup some flexible-array declarations.
- Promote numa_map_to_online_node() to a cross-kernel generic facility.
- Save x86 numa information to allow for node-id lookups for reserved
memory ranges, deploy that capability for the e820-pmem driver.
- Introduce phys_to_target_node() to facilitate drivers that want to
know resulting numa node if a given reserved address range was
onlined.
Unlike normal memory ("memory" compatible type in the FDT), the
persistent memory ("ibm,pmemory" in the FDT) can be mapped anywhere in
the guest physical space and it can be used for DMA.
In order to maintain 1:1 mapping via the huge DMA window, we need to
know the maximum physical address at the time of the window setup. So
far we've been looking at "memory" nodes but "ibm,pmemory" does not
have fixed addresses and the persistent memory may be mapped
afterwards.
Since the persistent memory is still backed with page structs, use
MAX_PHYSMEM_BITS as the upper limit.
This effectively disables huge DMA window in LPAR under pHyp if
persistent memory is present but this is the best we can do for the
moment.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Tested-by: Wen Xiong<wenxiong@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200331012338.23773-1-aik@ozlabs.ru
After introducing mem sub section concept, pfn_present() loses its literal
meaning, and will not be necessary a truth on partial populated mem
section.
Since all of the callers use it to judge an absent section, it is better
to rename pfn_present() as pfn_in_present_section().
Signed-off-by: Pingfan Liu <kernelfans@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc]
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Leonardo Bras <leonardo@linux.ibm.com>
Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Cc: Nathan Lynch <nathanl@linux.ibm.com>
Link: http://lkml.kernel.org/r/1581919110-29575-1-git-send-email-kernelfans@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
commit <249fad734a25> ""powerpc/perf: Disable trace_imc pmu"
disables IMC(In-Memory Collection) trace-mode in kernel, since frequent
mode switching between accumulation mode and trace mode via the spr LDBAR
in the hardware can trigger a checkstop(system crash).
Patch to re-enable imc-trace mode in kernel.
The previous patch(1/2) in this series will address the mode switching issue
by implementing a global lock, and will restrict the usage of
accumulation and trace-mode at a time.
Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200313055238.8656-2-anju@linux.vnet.ibm.com
MCE handling on pSeries platform fails as recent rework to use common
code for pSeries and PowerNV in machine check error handling tries to
access per-cpu variables in realmode. The per-cpu variables may be
outside the RMO region on pSeries platform and needs translation to be
enabled for access. Just moving these per-cpu variable into RMO region
did'nt help because we queue some work to workqueues in real mode, which
again tries to touch per-cpu variables. Also fwnmi_release_errinfo()
cannot be called when translation is not enabled.
This patch fixes this by enabling translation in the exception handler
when all required real mode handling is done. This change only affects
the pSeries platform.
Without this fix below kernel crash is seen on injecting
SLB multihit:
BUG: Unable to handle kernel data access on read at 0xc00000027b205950
Faulting instruction address: 0xc00000000003b7e0
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
Modules linked in: mcetest_slb(OE+) af_packet(E) xt_tcpudp(E) ip6t_rpfilter(E) ip6t_REJECT(E) ipt_REJECT(E) xt_conntrack(E) ip_set(E) nfnetlink(E) ebtable_nat(E) ebtable_broute(E) ip6table_nat(E) ip6table_mangle(E) ip6table_raw(E) ip6table_security(E) iptable_nat(E) nf_nat(E) nf_conntrack(E) nf_defrag_ipv6(E) nf_defrag_ipv4(E) iptable_mangle(E) iptable_raw(E) iptable_security(E) ebtable_filter(E) ebtables(E) ip6table_filter(E) ip6_tables(E) iptable_filter(E) ip_tables(E) x_tables(E) xfs(E) ibmveth(E) vmx_crypto(E) gf128mul(E) uio_pdrv_genirq(E) uio(E) crct10dif_vpmsum(E) rtc_generic(E) btrfs(E) libcrc32c(E) xor(E) zstd_decompress(E) zstd_compress(E) raid6_pq(E) sr_mod(E) sd_mod(E) cdrom(E) ibmvscsi(E) scsi_transport_srp(E) crc32c_vpmsum(E) dm_mod(E) sg(E) scsi_mod(E)
CPU: 34 PID: 8154 Comm: insmod Kdump: loaded Tainted: G OE 5.5.0-mahesh #1
NIP: c00000000003b7e0 LR: c0000000000f2218 CTR: 0000000000000000
REGS: c000000007dcb960 TRAP: 0300 Tainted: G OE (5.5.0-mahesh)
MSR: 8000000000001003 <SF,ME,RI,LE> CR: 28002428 XER: 20040000
CFAR: c0000000000f2214 DAR: c00000027b205950 DSISR: 40000000 IRQMASK: 0
GPR00: c0000000000f2218 c000000007dcbbf0 c000000001544800 c000000007dcbd70
GPR04: 0000000000000001 c000000007dcbc98 c008000000d00258 c0080000011c0000
GPR08: 0000000000000000 0000000300000003 c000000001035950 0000000003000048
GPR12: 000000027a1d0000 c000000007f9c000 0000000000000558 0000000000000000
GPR16: 0000000000000540 c008000001110000 c008000001110540 0000000000000000
GPR20: c00000000022af10 c00000025480fd70 c008000001280000 c00000004bfbb300
GPR24: c000000001442330 c00800000800000d c008000008000000 4009287a77000510
GPR28: 0000000000000000 0000000000000002 c000000001033d30 0000000000000001
NIP [c00000000003b7e0] save_mce_event+0x30/0x240
LR [c0000000000f2218] pseries_machine_check_realmode+0x2c8/0x4f0
Call Trace:
Instruction dump:
3c4c0151 38429050 7c0802a6 60000000 fbc1fff0 fbe1fff8 f821ffd1 3d42ffaf
3fc2ffaf e98d0030 394a1150 3bdef530 <7d6a62aa> 1d2b0048 2f8b0063 380b0001
---[ end trace 46fd63f36bbdd940 ]---
Fixes: 9ca766f989 ("powerpc/64s/pseries: machine check convert to use common event code")
Reviewed-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Ganesh Goudar <ganeshgr@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200320110119.10207-1-ganeshgr@linux.ibm.com
The ISA_DMA_THRESHOLD variable is set by several platforms but never
referenced.
Remove it.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191125092033.20014-1-rppt@kernel.org
Currently, kernel shows the below values
"persistence_domain":"cpu_cache"
"persistence_domain":"memory_controller"
"persistence_domain":"unknown"
"cpu_cache" indicates no extra instructions is needed to ensure the persistence
of data in the pmem media on power failure.
"memory_controller" indicates cpu cache flush instructions are required to flush
the data. Platform provides mechanisms to automatically flush outstanding
write data from memory controler to pmem on system power loss.
Based on the above use memory_controller for non volatile regions on ppc64.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Link: https://lore.kernel.org/r/20200324034821.60869-1-aneesh.kumar@linux.ibm.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
memcpy_mcsafe has been implemented for power machines which is used
by pmem infrastructure, so that an UE encountered during memcpy from
pmem devices would not result in panic instead a right error code
is returned. The implementation expects machine check handler to ignore
the event and set nip to continue the execution from fixup code.
Appropriate changes are already made to powernv machine check handler,
make similar changes to pseries machine check handler to ignore the
the event and set nip to continue execution at the fixup entry if we
hit UE at an instruction with a fixup entry.
while we are at it, have a common function which searches the exception
table entry and updates nip with fixup address, and any future common
changes can be made in this function that are valid for both architectures.
powernv changes are made by
commit 895e3dceeb ("powerpc/mce: Handle UE event for memcpy_mcsafe")
Reviewed-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Reviewed-by: Santosh S <santosh@fossix.org>
Signed-off-by: Ganesh Goudar <ganeshgr@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200326184916.31172-1-ganeshgr@linux.ibm.com
When building ppc64 defconfig, Clang errors (trimmed for brevity):
arch/powerpc/platforms/maple/setup.c:365:1: error: attribute declaration
must precede definition [-Werror,-Wignored-attributes]
machine_device_initcall(maple, maple_cpc925_edac_setup);
^
machine_device_initcall expands to __define_machine_initcall, which in
turn has the macro machine_is used in it, which declares mach_##name
with an __attribute__((weak)). define_machine actually defines
mach_##name, which in this file happens before the declaration, hence
the warning.
To fix this, move define_machine after machine_device_initcall so that
the declaration occurs before the definition, which matches how
machine_device_initcall and define_machine work throughout
arch/powerpc.
While we're here, remove some spaces before tabs.
Fixes: 8f101a051e ("edac: cpc925 MC platform device setup")
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Suggested-by: Ilie Halip <ilie.halip@gmail.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200323222729.15365-1-natechancellor@gmail.com
With the EEH early probe now being pseries specific there's no need for
eeh_ops->probe() to take a pci_dn. Instead, we can make it take a pci_dev
and use the probe function to map a pci_dev to an eeh_dev. This allows
the platform to implement it's own method for finding (or creating) an
eeh_dev for a given pci_dev which also removes a use of pci_dn in
generic EEH code.
This patch also renames eeh_device_add_late() to eeh_device_probe(). This
better reflects what it does does and removes the last vestiges of the
early/late EEH probe split.
Reviewed-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200306073904.4737-6-oohall@gmail.com
The eeh_ops->probe() function is called from two different contexts:
1. On pseries, where we set EEH_PROBE_MODE_DEVTREE, it's called in
eeh_add_device_early() which is supposed to run before we create
a pci_dev.
2. On PowerNV, where we set EEH_PROBE_MODE_DEV, it's called in
eeh_device_add_late() which is supposed to run *after* the
pci_dev is created.
The "early" probe is required because PAPR requires that we perform an RTAS
call to enable EEH support on a device before we start interacting with it
via config space or MMIO. This requirement doesn't exist on PowerNV and
shoehorning two completely separate initialisation paths into a common
interface just results in a convoluted code everywhere.
Additionally the early probe requires the probe function to take an pci_dn
rather than a pci_dev argument. We'd like to make pci_dn a pseries specific
data structure since there's no real requirement for them on PowerNV. To
help both goals move the early probe into the pseries containment zone
so the platform depedence is more explicit.
Reviewed-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200306073904.4737-5-oohall@gmail.com
Move creating the EEH specific sysfs files into eeh_add_device_late()
rather than being open-coded all over the place. Calling the function is
generally done immediately after calling eeh_add_device_late() anyway. This
is also a correctness fix since currently the sysfs files will be added
even if the EEH probe happens to fail.
Similarly, on pseries we currently add the sysfs files before calling
eeh_add_device_late(). This is flat-out broken since the sysfs files
require the pci_dev->dev.archdata.edev pointer to be set, and that is done
in eeh_add_device_late().
Reviewed-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200306073904.4737-1-oohall@gmail.com
The expectation is that when calling of_read_drc_info_cell()
repeatedly to parse multiple drc-info records that the in/out curval
parameter points at the start of the next record on return. However,
the current behavior has curval still pointing at the final value of
the record just parsed. The result of which is that if the
ibm,drc-info property contains multiple properties the parsed value
of the drc_type for any record after the first has the power_domain
value of the previous record appended to the type string.
eg: observed the following 0xffffffff prepended to PHB
drc-info: type: \xff\xff\xff\xffPHB, prefix: PHB , index_start: 0x20000001
drc-info: suffix_start: 1, sequential_elems: 3072, sequential_inc: 1
drc-info: power-domain: 0xffffffff, last_index: 0x20000c00
In practice PHBs are the only type of connector in the ibm,drc-info
property that has multiple records. So, it breaks PHB hotplug, but by
chance not PCI, CPU, slot, or memory because they happen to only ever
be a single record.
Fix by incrementing curval past the power_domain value to point at
drc_type string of next record.
Fixes: e83636ac33 ("pseries/drc-info: Search DRC properties for CPU indexes")
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Acked-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200307024547.5748-1-tyreld@linux.ibm.com
The PS3 notification interrupt and kthread use a hacked up completion to
communicate. Since we're wanting to change the completion implementation and
this is abuse anyway, replace it with a simple rcuwait since there is only ever
the one waiter.
AFAICT the kthread uses TASK_INTERRUPTIBLE to not increase loadavg, kthreads
cannot receive signals by default and this one doesn't look different. Use
TASK_IDLE instead.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200321113241.930037873@linutronix.de
Currently you can enable PPC_KUAP_DEBUG when PPC_KUAP is disabled,
even though the former has not effect without the latter.
Fix it so that PPC_KUAP_DEBUG can only be enabled when PPC_KUAP is
enabled, not when the platform could support KUAP (PPC_HAVE_KUAP).
Fixes: 890274c2dc ("powerpc/64s: Implement KUAP for Radix MMU")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200301111738.22497-1-mpe@ellerman.id.au
The NDD_ALIASING flag is used to indicate where pmem capacity might
alias with blk capacity and require labeling. It is also used to
indicate whether the DIMM supports labeling. Separate this latter
capability into its own flag so that the NDD_ALIASING flag is scoped to
true aliased configurations.
To my knowledge aliased configurations only exist in the ACPI spec,
there are no known platforms that ship this support in production.
This clarity allows namespace-capacity alignment constraints around
interleave-ways to be relaxed.
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Link: https://lore.kernel.org/r/158041477856.3889308.4212605617834097674.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
When building with ppc64_defconfig, the compiler reports
that these 2 variables are not used:
warning: unused variable 'core99_l2_cache' [-Wunused-variable]
warning: unused variable 'core99_l3_cache' [-Wunused-variable]
They are only used when CONFIG_PPC64 is not defined. Move
them into a section which does the same macro check.
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Ilie Halip <ilie.halip@gmail.com>
[mpe: Move them into core99_init_caches() which is their only user]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190920153951.25762-1-ilie.halip@gmail.com
There is no value in unpacking associativity, if
H_HOME_NODE_ASSOCIATIVITY hcall has returned an error.
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Reported-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Reviewed-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200129135301.24739-2-srikar@linux.vnet.ibm.com
Many of the performance monitoring unit (PMU) SPRs are
exposed in the sysfs. This may not be a desirable since
"perf" API is the primary interface to program PMU and
collect counter data in the system. But that said, we
cant remove these sysfs files since we dont whether
anyone/anything is using them.
So the patch adds a new CONFIG option 'CONFIG_PMU_SYSFS'
(user selectable) to be used in sysfs file creation for
PMU SPRs. New option by default is disabled, but can be
enabled if user needs it.
Tested this patch behaviour in powernv and pseries machines.
Patch is also tested for pmac32_defconfig.
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Tested-by: Nageswara R Sastry <nasastry@in.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200214080606.26872-2-kjain@linux.ibm.com
Add a way to manually invoke a fast-reboot rather than setting the NVRAM
flag. The idea is to allow userspace to invoke a fast-reboot using the
optional string argument to the reboot() system call, or using the xmon
zr command so we don't need to leave around a persistent changes on
a system to use the feature.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200217024833.30580-2-oohall@gmail.com
Treat an empty reboot cmd string the same as a NULL string. This squashes a
spurious unsupported reboot message that sometimes gets out when using
xmon.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200217024833.30580-1-oohall@gmail.com
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200209105901.1620958-6-gregkh@linuxfoundation.org
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200209105901.1620958-5-gregkh@linuxfoundation.org
In some error handling path, we should call "of_node_put(np_par)" or
some resource may be leaking in case of error.
Fixes: 8159df72d4 ("83xx: add support for the kmeter1 board.")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Scott Wood <oss@buserror.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200208140920.7652-1-christophe.jaillet@wanadoo.fr
In guests without hotplugagble memory drmem structure is only zero
initialized. Trying to manipulate DLPAR parameters results in a crash.
$ echo "memory add count 1" > /sys/kernel/dlpar
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
...
NIP: c0000000000ff294 LR: c0000000000ff248 CTR: 0000000000000000
REGS: c0000000fb9d3880 TRAP: 0300 Tainted: G E (5.5.0-rc6-2-default)
MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR: 28242428 XER: 20000000
CFAR: c0000000009a6c10 DAR: 0000000000000010 DSISR: 40000000 IRQMASK: 0
...
NIP dlpar_memory+0x6e4/0xd00
LR dlpar_memory+0x698/0xd00
Call Trace:
dlpar_memory+0x698/0xd00 (unreliable)
handle_dlpar_errorlog+0xc0/0x190
dlpar_store+0x198/0x4a0
kobj_attr_store+0x30/0x50
sysfs_kf_write+0x64/0x90
kernfs_fop_write+0x1b0/0x290
__vfs_write+0x3c/0x70
vfs_write+0xd0/0x260
ksys_write+0xdc/0x130
system_call+0x5c/0x68
Taking closer look at the code, I can see that for_each_drmem_lmb is a
macro expanding into `for (lmb = &drmem_info->lmbs[0]; lmb <=
&drmem_info->lmbs[drmem_info->n_lmbs - 1]; lmb++)`. When drmem_info->lmbs
is NULL, the loop would iterate through the whole address range if it
weren't stopped by the NULL pointer dereference on the next line.
This patch aligns for_each_drmem_lmb and for_each_drmem_lmb_in_range
macro behavior with the common C semantics, where the end marker does
not belong to the scanned range, and alters get_lmb_range() semantics.
As a side effect, the wraparound observed in the crash is prevented.
Fixes: 6c6ea53725 ("powerpc/mm: Separate ibm, dynamic-memory data from DT format")
Cc: stable@vger.kernel.org # v4.16+
Signed-off-by: Libor Pechacek <lpechacek@suse.cz>
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200131132829.10281-1-msuchanek@suse.de
The /sys/firmware/opal/core and /sys/kernel/fadump_release_opalcore
sysfs files are used to export and release the OPAL memory on PowerNV
platform. let's organize them into a new kobject under
/sys/firmware/opal/mpipl/ directory.
A symlink is added to maintain the backward compatibility for
/sys/firmware/opal/core sysfs file.
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191211160910.21656-5-sourabhjain@linux.ibm.com
Function papr_scm_ndctl() is neither exported from the module nor
called directly from outside 'papr.c' hence should be marked 'static'.
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200130040206.79998-1-vaibhav@linux.ibm.com
The pseries Makefile (arch/powerpc/platforms/pseries/Makefile) is only
included by the platform Makefile (arch/powerpc/platform/Makefile)
when CONFIG_PPC_PSERIES is selected, so checking for
CONFIG_PPC_PSERIES in the pseries Makefile is pointless.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200130063153.19915-2-oohall@gmail.com
vio.c is in platforms/pseries, which is only built if PPC_PSERIES=y.
In other words, this ifdef is pointless.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200130063153.19915-1-oohall@gmail.com
Various driver updates for platforms:
- Nvidia: Fuse support for Tegra194, continued memory controller pieces
for Tegra30
- NXP/FSL: Refactorings of QuickEngine drivers to support ARM/ARM64/PPC
- NXP/FSL: i.MX8MP SoC driver pieces
- TI Keystone: ring accelerator driver
- Qualcomm: SCM driver cleanup/refactoring + support for new SoCs.
- Xilinx ZynqMP: feature checking interface for firmware. Mailbox
communication for power management
- Overall support patch set for cpuidle on more complex hierarchies
(PSCI-based)
+ Misc cleanups, refactorings of Marvell, TI, other platforms.
-----BEGIN PGP SIGNATURE-----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=ONtb
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC-related driver updates from Olof Johansson:
"Various driver updates for platforms:
- Nvidia: Fuse support for Tegra194, continued memory controller
pieces for Tegra30
- NXP/FSL: Refactorings of QuickEngine drivers to support
ARM/ARM64/PPC
- NXP/FSL: i.MX8MP SoC driver pieces
- TI Keystone: ring accelerator driver
- Qualcomm: SCM driver cleanup/refactoring + support for new SoCs.
- Xilinx ZynqMP: feature checking interface for firmware. Mailbox
communication for power management
- Overall support patch set for cpuidle on more complex hierarchies
(PSCI-based)
and misc cleanups, refactorings of Marvell, TI, other platforms"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (166 commits)
drivers: soc: xilinx: Use mailbox IPI callback
dt-bindings: power: reset: xilinx: Add bindings for ipi mailbox
drivers: soc: ti: knav_qmss_queue: Pass lockdep expression to RCU lists
MAINTAINERS: Add brcmstb PCIe controller entry
soc/tegra: fuse: Unmap registers once they are not needed anymore
soc/tegra: fuse: Correct straps' address for older Tegra124 device trees
soc/tegra: fuse: Warn if straps are not ready
soc/tegra: fuse: Cache values of straps and Chip ID registers
memory: tegra30-emc: Correct error message for timed out auto calibration
memory: tegra30-emc: Firm up hardware programming sequence
memory: tegra30-emc: Firm up suspend/resume sequence
soc/tegra: regulators: Do nothing if voltage is unchanged
memory: tegra: Correct reset value of xusb_hostr
soc/tegra: fuse: Add APB DMA dependency for Tegra20
bus: tegra-aconnect: Remove PM_CLK dependency
dt-bindings: mediatek: add MT6765 power dt-bindings
soc: mediatek: cmdq: delete not used define
memory: tegra: Add support for the Tegra194 memory controller
memory: tegra: Only include support for enabled SoCs
memory: tegra: Support DVFS on Tegra186 and later
...
Pull vfs file system parameter updates from Al Viro:
"Saner fs_parser.c guts and data structures. The system-wide registry
of syntax types (string/enum/int32/oct32/.../etc.) is gone and so is
the horror switch() in fs_parse() that would have to grow another case
every time something got added to that system-wide registry.
New syntax types can be added by filesystems easily now, and their
namespace is that of functions - not of system-wide enum members. IOW,
they can be shared or kept private and if some turn out to be widely
useful, we can make them common library helpers, etc., without having
to do anything whatsoever to fs_parse() itself.
And we already get that kind of requests - the thing that finally
pushed me into doing that was "oh, and let's add one for timeouts -
things like 15s or 2h". If some filesystem really wants that, let them
do it. Without somebody having to play gatekeeper for the variants
blessed by direct support in fs_parse(), TYVM.
Quite a bit of boilerplate is gone. And IMO the data structures make a
lot more sense now. -200LoC, while we are at it"
* 'merge.nfs-fs_parse.1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (25 commits)
tmpfs: switch to use of invalfc()
cgroup1: switch to use of errorfc() et.al.
procfs: switch to use of invalfc()
hugetlbfs: switch to use of invalfc()
cramfs: switch to use of errofc() et.al.
gfs2: switch to use of errorfc() et.al.
fuse: switch to use errorfc() et.al.
ceph: use errorfc() and friends instead of spelling the prefix out
prefix-handling analogues of errorf() and friends
turn fs_param_is_... into functions
fs_parse: handle optional arguments sanely
fs_parse: fold fs_parameter_desc/fs_parameter_spec
fs_parser: remove fs_parameter_description name field
add prefix to fs_context->log
ceph_parse_param(), ceph_parse_mon_ips(): switch to passing fc_log
new primitive: __fs_parse()
switch rbd and libceph to p_log-based primitives
struct p_log, variants of warnf() et.al. taking that one instead
teach logfc() to handle prefices, give it saner calling conventions
get rid of cg_invalf()
...
Unused now.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
- Implement user_access_begin() and friends for our platforms that support
controlling kernel access to userspace.
- Enable CONFIG_VMAP_STACK on 32-bit Book3S and 8xx.
- Some tweaks to our pseries IOMMU code to allow SVMs ("secure" virtual
machines) to use the IOMMU.
- Add support for CLOCK_{REALTIME/MONOTONIC}_COARSE to the 32-bit VDSO, and
some other improvements.
- A series to use the PCI hotplug framework to control opencapi card's so that
they can be reset and re-read after flashing a new FPGA image.
As well as other minor fixes and improvements as usual.
Thanks to:
Alastair D'Silva, Alexandre Ghiti, Alexey Kardashevskiy, Andrew Donnellan,
Aneesh Kumar K.V, Anju T Sudhakar, Bai Yingjie, Chen Zhou, Christophe Leroy,
Frederic Barrat, Greg Kurz, Jason A. Donenfeld, Joel Stanley, Jordan Niethe,
Julia Lawall, Krzysztof Kozlowski, Laurent Dufour, Laurentiu Tudor, Linus
Walleij, Michael Bringmann, Nathan Chancellor, Nicholas Piggin, Nick
Desaulniers, Oliver O'Halloran, Peter Ujfalusi, Pingfan Liu, Ram Pai, Randy
Dunlap, Russell Currey, Sam Bobroff, Sebastian Andrzej Siewior, Shawn
Anastasio, Stephen Rothwell, Steve Best, Sukadev Bhattiprolu, Thiago Jung
Bauermann, Tyrel Datwyler, Vaibhav Jain.
-----BEGIN PGP SIGNATURE-----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=xpG+
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"A pretty small batch for us, and apologies for it being a bit late, I
wanted to sneak Christophe's user_access_begin() series in.
Summary:
- Implement user_access_begin() and friends for our platforms that
support controlling kernel access to userspace.
- Enable CONFIG_VMAP_STACK on 32-bit Book3S and 8xx.
- Some tweaks to our pseries IOMMU code to allow SVMs ("secure"
virtual machines) to use the IOMMU.
- Add support for CLOCK_{REALTIME/MONOTONIC}_COARSE to the 32-bit
VDSO, and some other improvements.
- A series to use the PCI hotplug framework to control opencapi
card's so that they can be reset and re-read after flashing a new
FPGA image.
As well as other minor fixes and improvements as usual.
Thanks to: Alastair D'Silva, Alexandre Ghiti, Alexey Kardashevskiy,
Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Bai Yingjie, Chen
Zhou, Christophe Leroy, Frederic Barrat, Greg Kurz, Jason A.
Donenfeld, Joel Stanley, Jordan Niethe, Julia Lawall, Krzysztof
Kozlowski, Laurent Dufour, Laurentiu Tudor, Linus Walleij, Michael
Bringmann, Nathan Chancellor, Nicholas Piggin, Nick Desaulniers,
Oliver O'Halloran, Peter Ujfalusi, Pingfan Liu, Ram Pai, Randy Dunlap,
Russell Currey, Sam Bobroff, Sebastian Andrzej Siewior, Shawn
Anastasio, Stephen Rothwell, Steve Best, Sukadev Bhattiprolu, Thiago
Jung Bauermann, Tyrel Datwyler, Vaibhav Jain"
* tag 'powerpc-5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (131 commits)
powerpc: configs: Cleanup old Kconfig options
powerpc/configs/skiroot: Enable some more hardening options
powerpc/configs/skiroot: Disable xmon default & enable reboot on panic
powerpc/configs/skiroot: Enable security features
powerpc/configs/skiroot: Update for symbol movement only
powerpc/configs/skiroot: Drop default n CONFIG_CRYPTO_ECHAINIV
powerpc/configs/skiroot: Drop HID_LOGITECH
powerpc/configs: Drop NET_VENDOR_HP which moved to staging
powerpc/configs: NET_CADENCE became NET_VENDOR_CADENCE
powerpc/configs: Drop CONFIG_QLGE which moved to staging
powerpc: Do not consider weak unresolved symbol relocations as bad
powerpc/32s: Fix kasan_early_hash_table() for CONFIG_VMAP_STACK
powerpc: indent to improve Kconfig readability
powerpc: Provide initial documentation for PAPR hcalls
powerpc: Implement user_access_save() and user_access_restore()
powerpc: Implement user_access_begin and friends
powerpc/32s: Prepare prevent_user_access() for user_access_end()
powerpc/32s: Drop NULL addr verification
powerpc/kuap: Fix set direction in allow/prevent_user_access()
powerpc/32s: Fix bad_kuap_fault()
...
A few changes to retrieve DAR and DSISR from struct regs
instead of retrieving them directly, as they may have
changed due to a TLB miss.
Also modifies hash_page() and friends to work with virtual
data addresses instead of physical ones. Same on load_up_fpu()
and load_up_altivec().
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[mpe: Fix tovirt_vmstack call in head_32.S to fix CHRP build]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/2e2509a242fd5f3e23df4a06530c18060c4d321e.1576916812.git.christophe.leroy@c-s.fr
Correct overflow problem in calculation and display of Maximum Memory
value to syscfg.
Signed-off-by: Michael Bringmann <mwb@linux.ibm.com>
[mpe: Only n_lmbs needs casting to unsigned long]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/5577aef8-1d5a-ca95-ff0a-9c7b5977e5bf@linux.ibm.com
String 'bus_desc.provider_name' allocated inside
papr_scm_nvdimm_init() will leaks in case call to
nvdimm_bus_register() fails or when papr_scm_remove() is called.
This minor patch ensures that 'bus_desc.provider_name' is freed in
error path for nvdimm_bus_register() as well as in papr_scm_remove().
Fixes: b5beae5e22 ("powerpc/pseries: Add driver for PAPR SCM regions")
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200122155140.120429-1-vaibhav@linux.ibm.com
Commit e5afdf9dd5 ("powerpc/vfio_spapr_tce: Add reference counting to
iommu_table") missed an iommu_table allocation in the pseries vio code.
The iommu_table is allocated with kzalloc and as a result the associated
kref gets a value of zero. This has the side effect that during a DLPAR
remove of the associated virtual IOA the iommu_tce_table_put() triggers
a use-after-free underflow warning.
Call Trace:
[c0000002879e39f0] [c00000000071ecb4] refcount_warn_saturate+0x184/0x190
(unreliable)
[c0000002879e3a50] [c0000000000500ac] iommu_tce_table_put+0x9c/0xb0
[c0000002879e3a70] [c0000000000f54e4] vio_dev_release+0x34/0x70
[c0000002879e3aa0] [c00000000087cfa4] device_release+0x54/0xf0
[c0000002879e3b10] [c000000000d64c84] kobject_cleanup+0xa4/0x240
[c0000002879e3b90] [c00000000087d358] put_device+0x28/0x40
[c0000002879e3bb0] [c0000000007a328c] dlpar_remove_slot+0x15c/0x250
[c0000002879e3c50] [c0000000007a348c] remove_slot_store+0xac/0xf0
[c0000002879e3cd0] [c000000000d64220] kobj_attr_store+0x30/0x60
[c0000002879e3cf0] [c0000000004ff13c] sysfs_kf_write+0x6c/0xa0
[c0000002879e3d10] [c0000000004fde4c] kernfs_fop_write+0x18c/0x260
[c0000002879e3d60] [c000000000410f3c] __vfs_write+0x3c/0x70
[c0000002879e3d80] [c000000000415408] vfs_write+0xc8/0x250
[c0000002879e3dd0] [c0000000004157dc] ksys_write+0x7c/0x120
[c0000002879e3e20] [c00000000000b278] system_call+0x5c/0x68
Further, since the refcount was always zero the iommu_tce_table_put()
fails to call the iommu_table release function resulting in a leak.
Fix this issue be initilizing the iommu_table kref immediately after
allocation.
Fixes: e5afdf9dd5 ("powerpc/vfio_spapr_tce: Add reference counting to iommu_table")
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1579558202-26052-1-git-send-email-tyreld@linux.ibm.com
Setting ND_REGION_PAGEMAP flag implies namespace mode defaults to fsdax mode.
This also means kernel ends up creating struct page backing for these namspace
ranges. With large namespaces that is not the right thing to do. We
should let the user select the mode he/she wants the namespace to be created
with.
Hence disable ND_REGION_PAGEMAP for papr_scm regions. We still keep the flag for
of_pmem because it supports only small persistent memory regions.
This is similar to what is done for x86 with commit
commit: 004f1afbe1 ("libnvdimm, pmem: direct map legacy pmem by default")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200108064647.169637-1-aneesh.kumar@linux.ibm.com
This is only used in pci-ioda.c so move it there and rename it to match.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200110070207.439-6-oohall@gmail.com
pnv_pci_dma_dev_setup() does nothing but call the phb->dma_dev_setup()
callback, if one exists. That callback is only set for normal PCIe PHBs so
we can remove the layer of indirection and use the ioda version in
the pci_controller_ops.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200110070207.439-5-oohall@gmail.com
An ioda_pe for each VF is allocated in pnv_pci_sriov_enable() before
the pci_dev for the VF is created. We need to set the pe->pdev pointer
at some point after the pci_dev is created. Currently we do that in:
pcibios_bus_add_device()
pnv_pci_dma_dev_setup() (via phb->ops.dma_dev_setup)
/* fixup is done here */
pnv_pci_ioda_dma_dev_setup() (via pnv_phb->dma_dev_setup)
The fixup needs to be done before setting up DMA for for the VF's PE,
but there's no real reason to delay it until this point. Move the
fixup into pnv_pci_ioda_fixup_iov() so the ordering is:
pcibios_add_device()
pnv_pci_ioda_fixup_iov() (via ppc_md.pcibios_fixup_sriov)
pcibios_bus_add_device()
...
This isn't strictly required, but it's a slightly more logical place
to do the fixup and it simplifies pnv_pci_dma_dev_setup().
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200110070207.439-4-oohall@gmail.com
The pnv_pci_dma_dev_setup() only does something when:
1) There PHB contains VFs, or
2) The PHB defines a dma_dev_setup() callback in the pnv_phb structure.
Neither is true for NPU PHBs so there's no reason to set the callback.
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200110070207.439-3-oohall@gmail.com
OPAL provides several different kinds of reboot for the kernel to use,
namely forcing a full reboot, platform error reboot and MPIPL. Right now
triggering the alternative resets requires some ad-hoc method such as
triggering a kernel crash and hoping the stars align. It's sometimes handy
to be able to trigger one of these resets directly, so add a way to do
that.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191101085522.3055-2-oohall@gmail.com
Long before we had a generic way for firmware to export memory ranges of
interest we added a special case for the skiboot symbol map. The code is
pretty much identical to the generic export so re-use the code.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191101062611.32610-2-oohall@gmail.com
Originally we only had a handful of exported memory ranges, but we'd to
export the per-core trace buffers. This results in a lot of files in the
exports directory which is a but unfortunate. We can clean things up a bit
by turning subnodes into subdirectories of the exports directory.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191101062611.32610-1-oohall@gmail.com
Add a debugfs entry to dump the state of the active IODA PEs. The IODA
PE state reflects how the PHB's internal concept of a PE is
configured. This is separate to the EEH PE state and is managed power
the PowerNV PCI backend rather than the EEH core.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[mpe: Use DEFINE_DEBUGFS_ATTRIBUTE]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190912052945.12589-3-oohall@gmail.com
Make the dump trigger off any input rather than just '1'. This allows you
to write "echo 1> dump_diag_data" and it'll do what you want rather than
erroring out pointlessly.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190912052945.12589-2-oohall@gmail.com
Use the pnv_phb structure as the private data pointer for the debugfs
files. This lets us delete some code and an open-coded use of
hose->private_data.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190912052945.12589-1-oohall@gmail.com
The powerpc PCI code requires that a pci_dn structure exists for all
devices in the system. This is fine for real devices since at boot a pci_dn
is created for each PCI device in the DT and it's fine for hotplugged devices
since the hotplug slot driver will manage the pci_dn's devices in hotplug
slots. For SR-IOV, we need the platform / pcibios to manage the pci_dn for
virtual functions since firmware is unaware of VFs, and they aren't
"hot plugged" in the traditional sense.
Management of the pci_dn is handled by the, poorly named, functions:
add_pci_dev_data() and remove_pci_dev_data(). The entire body of these
functions is #ifdef`ed around CONFIG_PCI_IOV and they cannot be used
in any other context, so make them only available when CONFIG_PCI_IOV
is selected, and rename them to reflect their actual usage rather than
having them masquerade as generic code.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190821062655.19735-2-oohall@gmail.com
Unlike real PCI slots, opencapi slots are directly associated to
the (virtual) opencapi PHB, there's no intermediate bridge. So when
looking for a slot ID, we must start the search from the device node
itself and not its parent.
Also, the slot ID is not attached to a specific bdfn, so let's build
it from the PHB ID, like skiboot.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191121134918.7155-6-fbarrat@linux.ibm.com
With hotplug, an opencapi device can now go away. It needs to be
released, mostly to clean up its PE state. We were previously not
defining any device callback. We can reuse the standard PCI release
callback, it does a bit too much for an opencapi device, but it's
harmless, and only needs minor tuning.
Also separate the undo of the PELT-V code in a separate function, it
is not needed for NPU devices and it improves a bit the readability of
the code.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191121134918.7155-5-fbarrat@linux.ibm.com
The PE for an opencapi device was set as part of a late PHB fixup
operation, when creating the PHB. To use the PCI hotplug framework,
this is not going to work, as the PHB stays the same, it's only the
devices underneath which are updated. For regular PCI devices, it is
done as part of the reconfiguration of the bridge, but for opencapi
PHBs, we don't have an intermediate bridge. So let's define the PE
when the device is enabled. PEs are meaningless for opencapi, the NPU
doesn't define them and opal is not doing anything with them.
Reviewed-by: Alastair D'Silva <alastair@d-silva.org>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191121134918.7155-4-fbarrat@linux.ibm.com
Protect the PHB's list of PE. Probably not needed as long as it was
populated during PHB creation, but it feels right and will become
required once we can add/remove opencapi devices on hotplug.
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191121134918.7155-3-fbarrat@linux.ibm.com
The pci_dn structure used to store a pointer to the struct pci_dev, so
taking a reference on the device was required. However, the pci_dev
pointer was later removed from the pci_dn structure, but the reference
was kept for the npu device.
See commit 902bdc5745 ("powerpc/powernv/idoa: Remove unnecessary
pcidev from pci_dn").
We don't need to take a reference on the device when assigning the PE
as the struct pnv_ioda_pe is cleaned up at the same time as
the (physical) device is released. Doing so prevents the device from
being released, which is a problem for opencapi devices, since we want
to be able to remove them through PCI hotplug.
Now the ugly part: nvlink npu devices are not meant to be
released. Because of the above, we've always leaked a reference and
simply removing it now is dangerous and would likely require more
work. There's currently no release device callback for nvlink devices
for example. So to be safe, this patch leaks a reference on the npu
device, but only for nvlink and not opencapi.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191121134918.7155-2-fbarrat@linux.ibm.com
QUICC Engine drivers
- Improve the QE drivers to be compatible with ARM/ARM64/PPC64
architectures
- Various cleanups to the QE drivers
-----BEGIN PGP SIGNATURE-----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=e4jk
-----END PGP SIGNATURE-----
Merge tag 'soc-fsl-next-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux into arm/drivers
NXP/FSL SoC driver updates for v5.6
QUICC Engine drivers
- Improve the QE drivers to be compatible with ARM/ARM64/PPC64
architectures
- Various cleanups to the QE drivers
* tag 'soc-fsl-next-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux: (49 commits)
soc: fsl: qe: remove set but not used variable 'mm_gc'
soc: fsl: qe: remove PPC32 dependency from CONFIG_QUICC_ENGINE
soc: fsl: qe: remove unused #include of asm/irq.h from ucc.c
net: ethernet: freescale: make UCC_GETH explicitly depend on PPC32
net/wan/fsl_ucc_hdlc: reject muram offsets above 64K
net/wan/fsl_ucc_hdlc: fix reading of __be16 registers
net/wan/fsl_ucc_hdlc: avoid use of IS_ERR_VALUE()
soc: fsl: qe: avoid IS_ERR_VALUE in ucc_fast.c
soc: fsl: qe: drop pointless check in qe_sdma_init()
soc: fsl: qe: drop use of IS_ERR_VALUE in qe_sdma_init()
soc: fsl: qe: avoid IS_ERR_VALUE in ucc_slow.c
soc: fsl: qe: refactor cpm_muram_alloc_common to prevent BUG on error path
soc: fsl: qe: drop broken lazy call of cpm_muram_init()
soc: fsl: qe: make cpm_muram_free() ignore a negative offset
soc: fsl: qe: make cpm_muram_free() return void
soc: fsl: qe: change return type of cpm_muram_alloc() to s32
serial: ucc_uart: access __be32 field using be32_to_cpu
serial: ucc_uart: limit brg-frequency workaround to PPC32
serial: ucc_uart: use of_property_read_u32() in ucc_uart_probe()
serial: ucc_uart: stub out soft_uart_init for !CONFIG_PPC32
...
Link: https://lore.kernel.org/r/1578608351-23289-1-git-send-email-leoyang.li@nxp.com
Signed-off-by: Olof Johansson <olof@lixom.net>
This implements the tricky tracing and soft irq handling bits in C,
leaving the low level bit to asm.
A functional difference is that this redirects the interrupt exit to
a return stub to execute blr, rather than the lr address itself. This
is probably barely measurable on real hardware, but it keeps the link
stack balanced.
Tested with QEMU.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Move power4_fixup_nap back into exceptions-64s.S]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190711022404.18132-1-npiggin@gmail.com
con_init in tty/vt.c will now set conswitchp to dummy_con if it's unset.
Drop it from arch setup code.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20191218214506.49252-18-nivedita@alum.mit.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In lmb_is_removable(), if a section is not present, it should continue
to test the rest of the sections in the block. But the current code
fails to do so.
Fixes: 51925fb3c5 ("powerpc/pseries: Implement memory hotplug remove in the kernel")
Cc: stable@vger.kernel.org # v4.1+
Signed-off-by: Pingfan Liu <kernelfans@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1578632042-12415-1-git-send-email-kernelfans@gmail.com
CPU like P4080 has 36bit physical address, its DDR physical
start address can be configured above 4G by LAW registers.
For such systems in which their physical memory start address was
configured higher than 4G, we need also to write addr_h into the spin
table of the target secondary CPU, so that addr_h and addr_l together
represent a 64bit physical address.
Otherwise the secondary core can not get correct entry to start from.
Signed-off-by: Bai Yingjie <byj.tea@gmail.com>
Acked-by: Scott Wood <oss@buserror.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200106042957.26494-2-yingjie_bai@126.com
Use resource_size rather than a verbose computation on
the end and start fields.
The semantic patch that makes these changes is as follows:
(http://coccinelle.lip6.fr/)
<smpl>
@@ struct resource ptr; @@
- (ptr.end - ptr.start + 1)
+ resource_size(&ptr)
</smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1577900990-8588-11-git-send-email-Julia.Lawall@inria.fr
Use resource_size rather than a verbose computation on
the end and start fields.
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
<smpl>
@@ struct resource ptr; @@
- (ptr.end - ptr.start + 1)
+ resource_size(&ptr)
</smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Acked-by: Scott Wood <oss@buserror.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1577900990-8588-6-git-send-email-Julia.Lawall@inria.fr
With CONFIG_QUICC_ENGINE enabled and CONFIG_UCC_GETH + CONFIG_SERIAL_QE
disabled we have an unused variable (np). The code won't compile with
-Werror.
Move the np variable to the block where it is actually used.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Scott Wood <oss@buserror.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191219151602.1908411-1-bigeasy@linutronix.de
H_PUT_TCE_INDIRECT uses a shared page to send up to 512 TCE to
a hypervisor in a single hypercall. This does not work for secure VMs
as the page needs to be shared or the VM should use H_PUT_TCE instead.
This disables H_PUT_TCE_INDIRECT by clearing the FW_FEATURE_PUT_TCE_IND
feature bit so SVMs will map TCEs using H_PUT_TCE.
This is not a part of init_svm() as it is called too late after FW
patching is done and may result in a warning like this:
[ 3.727716] Firmware features changed after feature patching!
[ 3.727965] WARNING: CPU: 0 PID: 1 at (...)arch/powerpc/lib/feature-fixups.c:466 check_features+0xa4/0xc0
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Tested-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191216041924.42318-5-aik@ozlabs.ru
H_PUT_TCE_INDIRECT allows packing up to 512 TCE updates into a single
hypercall; H_STUFF_TCE can clear lots in a single hypercall too.
However, unlike H_STUFF_TCE (which writes the same TCE to all entries),
H_PUT_TCE_INDIRECT uses a 4K page with new TCEs. In a secure VM
environment this means sharing a secure VM page with a hypervisor which
we would rather avoid.
This splits the FW_FEATURE_MULTITCE feature into FW_FEATURE_PUT_TCE_IND
and FW_FEATURE_STUFF_TCE. "hcall-multi-tce" in
the "/rtas/ibm,hypertas-functions" device tree property sets both;
the "multitce=off" kernel command line parameter disables both.
This should not cause behavioural change.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Tested-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191216041924.42318-4-aik@ozlabs.ru
By default a pseries guest supports a H_PUT_TCE hypercall which maps
a single IOMMU page in a DMA window. Additionally the hypervisor may
support H_PUT_TCE_INDIRECT/H_STUFF_TCE which update multiple TCEs at once;
this is advertised via the device tree /rtas/ibm,hypertas-functions
property which Linux converts to FW_FEATURE_MULTITCE.
FW_FEATURE_MULTITCE is checked when dma_iommu_ops is used; however
the code managing the huge DMA window (DDW) ignores it and calls
H_PUT_TCE_INDIRECT even if it is explicitly disabled via
the "multitce=off" kernel command line parameter.
This adds FW_FEATURE_MULTITCE checking to the DDW code path.
This changes tce_build_pSeriesLP to take liobn and page size as
the huge window does not have iommu_table descriptor which usually
the place to store these numbers.
Fixes: 4e8b0cf46b ("powerpc/pseries: Add support for dynamic dma windows")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Tested-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191216041924.42318-3-aik@ozlabs.ru
This reverts commit edea902c1c.
At the time the change allowed direct DMA ops for secure VMs; however
since then we switched on using SWIOTLB backed with IOMMU (direct mapping)
and to make this work, we need dma_iommu_ops which handles all cases
including TCE mapping I/O pages in the presence of an IOMMU.
Fixes: edea902c1c ("powerpc/pseries/iommu: Don't use dma_iommu_ops on secure guests")
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
[aik: added "revert" and "fixes:"]
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Tested-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191216041924.42318-2-aik@ozlabs.ru
Commit d4e58e5928 ("powerpc/powernv: Enable POWER8 doorbell IPIs")
added a select of PPC_DOORBELL to PPC_PSERIES, but it already had a
select of PPC_DOORBELL. One is enough.
Reported-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191219125840.32592-1-mpe@ellerman.id.au
dma_request_slave_channel() is a wrapper on top of dma_request_chan()
eating up the error code.
By using dma_request_chan() directly the driver can support deferred
probing against DMA.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191217073730.21249-1-peter.ujfalusi@ti.com
On pseries there is a bug with adding hotplugged devices to an IOMMU
group. For a number of dumb reasons fixing that bug first requires
re-working how VFs are configured on PowerNV. For background, on
PowerNV we use the pcibios_sriov_enable() hook to do two things:
1. Create a pci_dn structure for each of the VFs, and
2. Configure the PHB's internal BARs so the MMIO range for each VF
maps to a unique PE.
Roughly speaking a PE is the hardware counterpart to a Linux IOMMU
group since all the devices in a PE share the same IOMMU table. A PE
also defines the set of devices that should be isolated in response to
a PCI error (i.e. bad DMA, UR/CA, AER events, etc). When isolated all
MMIO and DMA traffic to and from devicein the PE is blocked by the
root complex until the PE is recovered by the OS.
The requirement to block MMIO causes a giant headache because the P8
PHB generally uses a fixed mapping between MMIO addresses and PEs. As
a result we need to delay configuring the IOMMU groups for device
until after MMIO resources are assigned. For physical devices (i.e.
non-VFs) the PE assignment is done in pcibios_setup_bridge() which is
called immediately after the MMIO resources for downstream
devices (and the bridge's windows) are assigned. For VFs the setup is
more complicated because:
a) pcibios_setup_bridge() is not called again when VFs are activated, and
b) The pci_dev for VFs are created by generic code which runs after
pcibios_sriov_enable() is called.
The work around for this is a two step process:
1. A fixup in pcibios_add_device() is used to initialised the cached
pe_number in pci_dn, then
2. A bus notifier then adds the device to the IOMMU group for the PE
specified in pci_dn->pe_number.
A side effect fixing the pseries bug mentioned in the first paragraph
is moving the fixup out of pcibios_add_device() and into
pcibios_bus_add_device(), which is called much later. This results in
step 2. failing because pci_dn->pe_number won't be initialised when
the bus notifier is run.
We can fix this by removing the need for the fixup. The PE for a VF is
known before the VF is even scanned so we can initialise
pci_dn->pe_number pcibios_sriov_enable() instead. Unfortunately,
moving the initialisation causes two problems:
1. We trip the WARN_ON() in the current fixup code, and
2. The EEH core clears pdn->pe_number when recovering a VF and
relies on the fixup to correctly re-set it.
The only justification for either of these is a comment in
eeh_rmv_device() suggesting that pdn->pe_number *must* be set to
IODA_INVALID_PE in order for the VF to be scanned. However, this
comment appears to have no basis in reality. Both bugs can be fixed by
just deleting the code.
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191028085424.12006-1-oohall@gmail.com
Commit 63341ab037 (virtio-balloon: fix managed page counts when migrating
pages between zones) fixed a long existing BUG in the virtio-balloon
driver when pages would get migrated between zones. I did not try to
reproduce on powerpc, but looking at the code, the same should apply to
powerpc/cmm ever since it started using the balloon compaction
infrastructure (luckily just recently).
In case we have to migrate a ballon page to a newpage of another zone, the
managed page count of both zones is wrong. Paired with memory offlining
(which will adjust the managed page count), we can trigger kernel crashes
and all kinds of different symptoms.
Fix it by properly adjusting the managed page count when migrating if
the zone changed.
We'll temporarily modify the totalram page count. If this ever becomes a
problem, we can fine tune by providing helpers that don't touch
the totalram pages (e.g., adjust_zone_managed_page_count()).
Fixes: fe030c9b85 ("powerpc/pseries/cmm: Implement balloon compaction")
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191216103058.4958-1-david@redhat.com
This is now exactly the same as mpc83xx_ipic_init_IRQ, so just use
that directly.
Acked-by: Scott Wood <oss@buserror.net>
Reviewed-by: Timur Tabi <timur@kernel.org>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Having to call qe_ic_init() from platform-specific code makes it
awkward to allow building the QE drivers for ARM. It's also a needless
duplication of code, and slightly error-prone: Instead of the caller
needing to know the details of whether the QUICC Engine High and QUICC
Engine Low are actually the same interrupt (see e.g. the machine_is()
in mpc85xx_mds_qeic_init), just let the init function choose the
appropriate handlers after it has parsed the DT and figured it out. If
the two interrupts are distinct, use separate handlers, otherwise use
the handler which first checks the CHIVEC register (for the high
priority interrupts), then the CIVEC.
All existing callers pass 0 for flags, so continue to do that from the
new single caller. Later cleanups will remove that argument
from qe_ic_init and simplify the body, as well as make qe_ic_init into
a proper init function for an IRQCHIP_DECLARE, eliminating the need to
manually look up the fsl,qe-ic node.
Reviewed-by: Timur Tabi <timur@kernel.org>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
The *_ipic and *_mpic handlers are almost identical - the only
difference is that the latter end with an unconditional
chip->irq_eoi() call. Since IPIC does not have ->irq_eoi, we can
reduce some code duplication by calling irq_eoi conditionally.
This is similar to what is already done in mpc8xxx_gpio_irq_cascade().
This leaves the functions slightly misnamed, but that will be fixed in
a subsequent patch.
Reviewed-by: Timur Tabi <timur@kernel.org>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
When a root user or a user with CAP_SYS_ADMIN privilege uses any
trace_imc performance monitoring unit events, to monitor application
or KVM threads, it may result in a checkstop (System crash).
The cause is frequent switching of the "trace/accumulation" mode of
the In-Memory Collection hardware (LDBAR).
This patch disables the trace_imc PMU unit entirely to avoid
triggering the checkstop. A future patch will reenable it at a later
stage once a workaround has been developed.
Fixes: 012ae24484 ("powerpc/perf: Trace imc PMU functions")
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Tested-by: Hariharan T.S. <hari@linux.ibm.com>
[mpe: Add pr_info_once() so dmesg shows the PMU has been disabled]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191118034452.9939-1-maddy@linux.vnet.ibm.com
export_imc_mode_and_cmd() function which creates the debugfs interface
for imc-mode and imc-command, is invoked when each nest pmu units is
registered.
When the first nest pmu unit is registered, export_imc_mode_and_cmd()
creates 'imc' directory under `/debug/powerpc/`. In the subsequent
invocations debugfs_create_dir() function returns, since the directory
already exists.
The recent commit <c33d442328f55> (debugfs: make error message a bit
more verbose), throws a warning if we try to invoke
`debugfs_create_dir()` with an already existing directory name.
Address this warning by making the debugfs directory registration in
the opal_imc_counters_probe() function, i.e invoke
export_imc_mode_and_cmd() function from the probe function.
Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Tested-by: Nageswara R Sastry <nasastry@in.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191127072035.4283-1-anju@linux.vnet.ibm.com
- Updates to better support vmalloc space restrictions on PowerPC platforms.
- Cleanups to move common sysfs attributes to core 'struct device_type'
objects.
- Export the 'target_node' attribute (the effective numa node if pmem is
marked online) for regions and namespaces.
- Miscellaneous fixups and optimizations.
-----BEGIN PGP SIGNATURE-----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=ITT3
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Dan Williams:
"The highlight this cycle is continuing integration fixes for PowerPC
and some resulting optimizations.
Summary:
- Updates to better support vmalloc space restrictions on PowerPC
platforms.
- Cleanups to move common sysfs attributes to core 'struct
device_type' objects.
- Export the 'target_node' attribute (the effective numa node if pmem
is marked online) for regions and namespaces.
- Miscellaneous fixups and optimizations"
* tag 'libnvdimm-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (21 commits)
MAINTAINERS: Remove Keith from NVDIMM maintainers
libnvdimm: Export the target_node attribute for regions and namespaces
dax: Add numa_node to the default device-dax attributes
libnvdimm: Simplify root read-only definition for the 'resource' attribute
dax: Simplify root read-only definition for the 'resource' attribute
dax: Create a dax device_type
libnvdimm: Move nvdimm_bus_attribute_group to device_type
libnvdimm: Move nvdimm_attribute_group to device_type
libnvdimm: Move nd_mapping_attribute_group to device_type
libnvdimm: Move nd_region_attribute_group to device_type
libnvdimm: Move nd_numa_attribute_group to device_type
libnvdimm: Move nd_device_attribute_group to device_type
libnvdimm: Move region attribute group definition
libnvdimm: Move attribute groups to device type
libnvdimm: Remove prototypes for nonexistent functions
libnvdimm/btt: fix variable 'rc' set but not used
libnvdimm/pmem: Delete include of nd-core.h
libnvdimm/namespace: Differentiate between probe mapping and runtime mapping
libnvdimm/pfn_dev: Don't clear device memmap area during generic namespace probe
libnvdimm: Trivial comment fix
...
As part of the cleanup of some remaining y2038 issues, I came to
fs/compat_ioctl.c, which still has a couple of commands that need support
for time64_t.
In completely unrelated work, I spent time on cleaning up parts of this
file in the past, moving things out into drivers instead.
After Al Viro reviewed an earlier version of this series and did a lot
more of that cleanup, I decided to try to completely eliminate the rest
of it and move it all into drivers.
This series incorporates some of Al's work and many patches of my own,
but in the end stops short of actually removing the last part, which is
the scsi ioctl handlers. I have patches for those as well, but they need
more testing or possibly a rewrite.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=lgCl
-----END PGP SIGNATURE-----
Merge tag 'compat-ioctl-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground
Pull removal of most of fs/compat_ioctl.c from Arnd Bergmann:
"As part of the cleanup of some remaining y2038 issues, I came to
fs/compat_ioctl.c, which still has a couple of commands that need
support for time64_t.
In completely unrelated work, I spent time on cleaning up parts of
this file in the past, moving things out into drivers instead.
After Al Viro reviewed an earlier version of this series and did a lot
more of that cleanup, I decided to try to completely eliminate the
rest of it and move it all into drivers.
This series incorporates some of Al's work and many patches of my own,
but in the end stops short of actually removing the last part, which
is the scsi ioctl handlers. I have patches for those as well, but they
need more testing or possibly a rewrite"
* tag 'compat-ioctl-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground: (42 commits)
scsi: sd: enable compat ioctls for sed-opal
pktcdvd: add compat_ioctl handler
compat_ioctl: move SG_GET_REQUEST_TABLE handling
compat_ioctl: ppp: move simple commands into ppp_generic.c
compat_ioctl: handle PPPIOCGIDLE for 64-bit time_t
compat_ioctl: move PPPIOCSCOMPRESS to ppp_generic
compat_ioctl: unify copy-in of ppp filters
tty: handle compat PPP ioctls
compat_ioctl: move SIOCOUTQ out of compat_ioctl.c
compat_ioctl: handle SIOCOUTQNSD
af_unix: add compat_ioctl support
compat_ioctl: reimplement SG_IO handling
compat_ioctl: move WDIOC handling into wdt drivers
fs: compat_ioctl: move FITRIM emulation into file systems
gfs2: add compat_ioctl support
compat_ioctl: remove unused convert_in_user macro
compat_ioctl: remove last RAID handling code
compat_ioctl: remove /dev/raw ioctl translation
compat_ioctl: remove PCI ioctl translation
compat_ioctl: remove joystick ioctl translation
...
Highlights:
- Infrastructure for secure boot on some bare metal Power9 machines. The
firmware support is still in development, so the code here won't actually
activate secure boot on any existing systems.
- A change to xmon (our crash handler / pseudo-debugger) to restrict it to
read-only mode when the kernel is lockdown'ed, otherwise it's trivial to drop
into xmon and modify kernel data, such as the lockdown state.
- Support for KASLR on 32-bit BookE machines (Freescale / NXP).
- Fixes for our flush_icache_range() and __kernel_sync_dicache() (VDSO) to work
with memory ranges >4GB.
- Some reworks of the pseries CMM (Cooperative Memory Management) driver to
make it behave more like other balloon drivers and enable some cleanups of
generic mm code.
- A series of fixes to our hardware breakpoint support to properly handle
unaligned watchpoint addresses.
Plus a bunch of other smaller improvements, fixes and cleanups.
Thanks to:
Alastair D'Silva, Andrew Donnellan, Aneesh Kumar K.V, Anthony Steinhauser,
Cédric Le Goater, Chris Packham, Chris Smart, Christophe Leroy, Christopher M.
Riedl, Christoph Hellwig, Claudio Carvalho, Daniel Axtens, David Hildenbrand,
Deb McLemore, Diana Craciun, Eric Richter, Geert Uytterhoeven, Greg
Kroah-Hartman, Greg Kurz, Gustavo L. F. Walbon, Hari Bathini, Harish, Jason
Yan, Krzysztof Kozlowski, Leonardo Bras, Mathieu Malaterre, Mauro S. M.
Rodrigues, Michal Suchanek, Mimi Zohar, Nathan Chancellor, Nathan Lynch, Nayna
Jain, Nick Desaulniers, Oliver O'Halloran, Qian Cai, Rasmus Villemoes, Ravi
Bangoria, Sam Bobroff, Santosh Sivaraj, Scott Wood, Thomas Huth, Tyrel
Datwyler, Vaibhav Jain, Valentin Longchamp, YueHaibing.
-----BEGIN PGP SIGNATURE-----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=JHzg
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"Highlights:
- Infrastructure for secure boot on some bare metal Power9 machines.
The firmware support is still in development, so the code here
won't actually activate secure boot on any existing systems.
- A change to xmon (our crash handler / pseudo-debugger) to restrict
it to read-only mode when the kernel is lockdown'ed, otherwise it's
trivial to drop into xmon and modify kernel data, such as the
lockdown state.
- Support for KASLR on 32-bit BookE machines (Freescale / NXP).
- Fixes for our flush_icache_range() and __kernel_sync_dicache()
(VDSO) to work with memory ranges >4GB.
- Some reworks of the pseries CMM (Cooperative Memory Management)
driver to make it behave more like other balloon drivers and enable
some cleanups of generic mm code.
- A series of fixes to our hardware breakpoint support to properly
handle unaligned watchpoint addresses.
Plus a bunch of other smaller improvements, fixes and cleanups.
Thanks to: Alastair D'Silva, Andrew Donnellan, Aneesh Kumar K.V,
Anthony Steinhauser, Cédric Le Goater, Chris Packham, Chris Smart,
Christophe Leroy, Christopher M. Riedl, Christoph Hellwig, Claudio
Carvalho, Daniel Axtens, David Hildenbrand, Deb McLemore, Diana
Craciun, Eric Richter, Geert Uytterhoeven, Greg Kroah-Hartman, Greg
Kurz, Gustavo L. F. Walbon, Hari Bathini, Harish, Jason Yan, Krzysztof
Kozlowski, Leonardo Bras, Mathieu Malaterre, Mauro S. M. Rodrigues,
Michal Suchanek, Mimi Zohar, Nathan Chancellor, Nathan Lynch, Nayna
Jain, Nick Desaulniers, Oliver O'Halloran, Qian Cai, Rasmus Villemoes,
Ravi Bangoria, Sam Bobroff, Santosh Sivaraj, Scott Wood, Thomas Huth,
Tyrel Datwyler, Vaibhav Jain, Valentin Longchamp, YueHaibing"
* tag 'powerpc-5.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (144 commits)
powerpc/fixmap: fix crash with HIGHMEM
x86/efi: remove unused variables
powerpc: Define arch_is_kernel_initmem_freed() for lockdep
powerpc/prom_init: Use -ffreestanding to avoid a reference to bcmp
powerpc: Avoid clang warnings around setjmp and longjmp
powerpc: Don't add -mabi= flags when building with Clang
powerpc: Fix Kconfig indentation
powerpc/fixmap: don't clear fixmap area in paging_init()
selftests/powerpc: spectre_v2 test must be built 64-bit
powerpc/powernv: Disable native PCIe port management
powerpc/kexec: Move kexec files into a dedicated subdir.
powerpc/32: Split kexec low level code out of misc_32.S
powerpc/sysdev: drop simple gpio
powerpc/83xx: map IMMR with a BAT.
powerpc/32s: automatically allocate BAT in setbat()
powerpc/ioremap: warn on early use of ioremap()
powerpc: Add support for GENERIC_EARLY_IOREMAP
powerpc/fixmap: Use __fix_to_virt() instead of fix_to_virt()
powerpc/8xx: use the fixmapped IMMR in cpm_reset()
powerpc/8xx: add __init to cpm1 init functions
...
- improve dma-debug scalability (Eric Dumazet)
- tiny dma-debug cleanup (Dan Carpenter)
- check for vmap memory in dma_map_single (Kees Cook)
- check for dma_addr_t overflows in dma-direct when using
DMA offsets (Nicolas Saenz Julienne)
- switch the x86 sta2x11 SOC to use more generic DMA code
(Nicolas Saenz Julienne)
- fix arm-nommu dma-ranges handling (Vladimir Murzin)
- use __initdata in CMA (Shyam Saini)
- replace the bus dma mask with a limit (Nicolas Saenz Julienne)
- merge the remapping helpers into the main dma-direct flow (me)
- switch xtensa to the generic dma remap handling (me)
- various cleanups around dma_capable (me)
- remove unused dev arguments to various dma-noncoherent helpers (me)
-----BEGIN PGP SIGNATURE-----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=e5wO
-----END PGP SIGNATURE-----
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux; tag 'dma-mapping-5.5' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- improve dma-debug scalability (Eric Dumazet)
- tiny dma-debug cleanup (Dan Carpenter)
- check for vmap memory in dma_map_single (Kees Cook)
- check for dma_addr_t overflows in dma-direct when using DMA offsets
(Nicolas Saenz Julienne)
- switch the x86 sta2x11 SOC to use more generic DMA code (Nicolas
Saenz Julienne)
- fix arm-nommu dma-ranges handling (Vladimir Murzin)
- use __initdata in CMA (Shyam Saini)
- replace the bus dma mask with a limit (Nicolas Saenz Julienne)
- merge the remapping helpers into the main dma-direct flow (me)
- switch xtensa to the generic dma remap handling (me)
- various cleanups around dma_capable (me)
- remove unused dev arguments to various dma-noncoherent helpers (me)
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux:
* tag 'dma-mapping-5.5' of git://git.infradead.org/users/hch/dma-mapping: (22 commits)
dma-mapping: treat dev->bus_dma_mask as a DMA limit
dma-direct: exclude dma_direct_map_resource from the min_low_pfn check
dma-direct: don't check swiotlb=force in dma_direct_map_resource
dma-debug: clean up put_hash_bucket()
powerpc: remove support for NULL dev in __phys_to_dma / __dma_to_phys
dma-direct: avoid a forward declaration for phys_to_dma
dma-direct: unify the dma_capable definitions
dma-mapping: drop the dev argument to arch_sync_dma_for_*
x86/PCI: sta2x11: use default DMA address translation
dma-direct: check for overflows on 32 bit DMA addresses
dma-debug: increase HASH_SIZE
dma-debug: reorder struct dma_debug_entry fields
xtensa: use the generic uncached segment support
dma-mapping: merge the generic remapping helpers into dma-direct
dma-direct: provide mmap and get_sgtable method overrides
dma-direct: remove the dma_handle argument to __dma_direct_alloc_pages
dma-direct: remove __dma_direct_free_pages
usb: core: Remove redundant vmap checks
kernel: dma-contiguous: mark CMA parameters __initdata/__initconst
dma-debug: add a schedule point in debug_dma_dump_mappings()
...
Here is the "big" set of driver core patches for 5.5-rc1
There's a few minor cleanups and fixes in here, but the majority of the
patches in here fall into two buckets:
- debugfs api cleanups and fixes
- driver core device link support for boot dependancy issues
The debugfs api cleanups are working to slowly refactor the debugfs apis
so that it is even harder to use incorrectly. That work has been
happening for the past few kernel releases and will continue over time,
it's a long-term project/goal
The driver core device link support missed 5.4 by just a bit, so it's
been sitting and baking for many months now. It's from Saravana Kannan
to help resolve the problems that DT-based systems have at boot time
with dependancy graphs and kernel modules. Turns out that no one has
actually tried to build a generic arm64 kernel with loads of modules and
have it "just work" for a variety of platforms (like a distro kernel)
The big problem turned out to be a lack of depandancy information
between different areas of DT entries, and the work here resolves that
problem and now allows devices to boot properly, and quicker than a
monolith kernel.
All of these patches have been in linux-next for a long time with no
reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXd6m6Q8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yntJQCcCqg6RQ7LTdHuZv1ETeefXlsfk00An1Jtean6
42bWGx52bGFvAcpjWy8R
=P7hq
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the "big" set of driver core patches for 5.5-rc1
There's a few minor cleanups and fixes in here, but the majority of
the patches in here fall into two buckets:
- debugfs api cleanups and fixes
- driver core device link support for boot dependancy issues
The debugfs api cleanups are working to slowly refactor the debugfs
apis so that it is even harder to use incorrectly. That work has been
happening for the past few kernel releases and will continue over
time, it's a long-term project/goal
The driver core device link support missed 5.4 by just a bit, so it's
been sitting and baking for many months now. It's from Saravana Kannan
to help resolve the problems that DT-based systems have at boot time
with dependancy graphs and kernel modules. Turns out that no one has
actually tried to build a generic arm64 kernel with loads of modules
and have it "just work" for a variety of platforms (like a distro
kernel). The big problem turned out to be a lack of dependency
information between different areas of DT entries, and the work here
resolves that problem and now allows devices to boot properly, and
quicker than a monolith kernel.
All of these patches have been in linux-next for a long time with no
reported issues"
* tag 'driver-core-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (68 commits)
tracing: Remove unnecessary DEBUG_FS dependency
of: property: Add device link support for interrupt-parent, dmas and -gpio(s)
debugfs: Fix !DEBUG_FS debugfs_create_automount
of: property: Add device link support for "iommu-map"
of: property: Fix the semantics of of_is_ancestor_of()
i2c: of: Populate fwnode in of_i2c_get_board_info()
drivers: base: Fix Kconfig indentation
firmware_loader: Fix labels with comma for builtin firmware
driver core: Allow device link operations inside sync_state()
driver core: platform: Declare ret variable only once
cpu-topology: declare parse_acpi_topology in <linux/arch_topology.h>
crypto: hisilicon: no need to check return value of debugfs_create functions
driver core: platform: use the correct callback type for bus_find_device
firmware_class: make firmware caching configurable
driver core: Clarify documentation for fwnode_operations.add_links()
mailbox: tegra: Fix superfluous IRQ error message
net: caif: Fix debugfs on 64-bit platforms
mac80211: Use debugfs_create_xul() helper
media: c8sectpfe: no need to check return value of debugfs_create functions
of: property: Add device link support for iommus, mboxes and io-channels
...
Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
$ sed -e 's/^ /\t/' -i */Kconfig
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1574306461-7646-1-git-send-email-krzk@kernel.org
On PowerNV the PCIe topology is (currently) managed by the powernv platform
code in Linux in cooperation with the platform firmware. Linux's native
PCIe port service drivers operate independently of both and this can cause
problems.
The main issue is that the portbus driver will conflict with the platform
specific hotplug driver (pnv_php) over ownership of the MSI used to notify
the host when a hotplug event occurs. The portbus driver claims this MSI on
behalf of the individual port services because the same interrupt is used
for hotplug events, PMEs (on root ports), and link bandwidth change
notifications. The portbus driver will always claim the interrupt even if
the individual port service drivers, such as pciehp, are compiled out.
The second, bigger, problem is that the hotplug port service driver
fundamentally does not work on PowerNV. The platform assumes that all
PCI devices have a corresponding arch-specific handle derived from the DT
node for the device (pci_dn) and without one the platform will not allow
a PCI device to be enabled. This problem is largely due to historical
baggage, but it can't be resolved without significant re-factoring of the
platform PCI support.
We can fix these problems in the interim by setting the
"pcie_ports_disabled" flag during platform initialisation. The flag
indicates the platform owns the PCIe ports which stops the portbus driver
from being registered.
This does have the side effect of disabling all port services drivers
that is: AER, PME, BW notifications, hotplug, and DPC. However, this is
not a huge disadvantage on PowerNV since these services are either unused
or handled through other means.
Fixes: 66725152fb ("PCI/hotplug: PowerPC PowerNV PCI hotplug driver")
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191118065553.30362-1-oohall@gmail.com
There is a config item CONFIG_SIMPLE_GPIO which
provides simple memory mapped GPIOs specific to powerpc.
However, the only platform which selects this option is
mpc5200, and this platform doesn't use it.
There are three boards calling simple_gpiochip_init(), but
as they don't select CONFIG_SIMPLE_GPIO, this is just a nop.
Simple_gpio is just redundant with the generic MMIO GPIO
driver which can be found in driver/gpio/ and selected via
CONFIG_GPIO_GENERIC_PLATFORM, so drop simple_gpio driver.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/bf930402613b41b42d0441b784e0cc43fc18d1fb.1572529632.git.christophe.leroy@c-s.fr
A 'struct device_type' instance can carry default attributes for the
device. Use this facility to remove the export of
nvdimm_bus_attribute_group and put the responsibility on the core rather
than leaf implementations to define this attribute.
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Oliver O'Halloran" <oohall@gmail.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Link: https://lore.kernel.org/r/157309903815.1582359.6418211876315050283.stgit@dwillia2-desk3.amr.corp.intel.com
A 'struct device_type' instance can carry default attributes for the
device. Use this facility to remove the export of
nvdimm_attribute_group and put the responsibility on the core rather
than leaf implementations to define this attribute.
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Oliver O'Halloran" <oohall@gmail.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Link: https://lore.kernel.org/r/157309903201.1582359.10966209746585062329.stgit@dwillia2-desk3.amr.corp.intel.com
A 'struct device_type' instance can carry default attributes for the
device. Use this facility to remove the export of
nd_mapping_attribute_group and put the responsibility on the core rather
than leaf implementations to define this attribute.
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Oliver O'Halloran" <oohall@gmail.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Link: https://lore.kernel.org/r/157309902686.1582359.6749533709859492704.stgit@dwillia2-desk3.amr.corp.intel.com
A 'struct device_type' instance can carry default attributes for the
device. Use this facility to remove the export of
nd_region_attribute_group and put the responsibility on the core rather
than leaf implementations to define this attribute.
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Oliver O'Halloran" <oohall@gmail.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Link: https://lore.kernel.org/r/157309902169.1582359.16828508538444551337.stgit@dwillia2-desk3.amr.corp.intel.com
A 'struct device_type' instance can carry default attributes for the
device. Use this facility to remove the export of
nd_numa_attribute_group and put the responsibility on the core rather
than leaf implementations to define this attribute.
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Oliver O'Halloran" <oohall@gmail.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Link: https://lore.kernel.org/r/157401269537.43284.14411189404186877352.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
On mpc83xx with a QE, IMMR is 2Mbytes and aligned on 2Mbytes boundarie.
On mpc83xx without a QE, IMMR is 1Mbyte and 1Mbyte aligned.
Each driver will map a part of it to access the registers it needs.
Some drivers will map the same part of IMMR as other drivers.
In order to reduce TLB misses, map the full IMMR with a BAT. If it is
2Mbytes aligned, map 2Mbytes. If there is no QE, the upper part will
remain unused, but it doesn't harm as it is mapped as guarded memory.
When the IMMR is not aligned on a 2Mbytes boundarie, only map 1Mbyte.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Acked-by: Scott Wood <oss@buserror.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/269a00951328fb6fa1be2fa3cbc76c19745019b7.1568665466.git.christophe.leroy@c-s.fr
Since commit f86ef74ed9 ("powerpc/8xx: Fix vaddr for IMMR early
remap"), the IMMR area has been mapped at startup with fixmap.
Use that fixmap directly instead of calling ioremap(), this
avoids calling ioremap() early before the slab is available.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/f816ccdbd15b97cf43c5a8c7cc8dfa8db58ff036.1568294935.git.christophe.leroy@c-s.fr
A 'struct device_type' instance can carry default attributes for the
device. Use this facility to remove the export of
nd_device_attribute_group and put the responsibility on the core rather
than leaf implementations to define this attribute.
For regions this creates a new nd_region_attribute_groups[] added to the
per-region device-type instances.
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Oliver O'Halloran" <oohall@gmail.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Link: https://lore.kernel.org/r/157309901138.1582359.12909354140826530394.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Since commit 302c059f2e (QE: use subsys_initcall to init qe),
mpc85xx_qe_init() has done nothing apart from possibly emitting a
pr_err(). As part of reducing the amount of QE-related code in
arch/powerpc/ (and eventually support QE on other architectures),
remove this low-hanging fruit.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Scott Wood <oss@buserror.net>
Changes the return variable to bool (as the return value) and
avoids doing a ternary operation before returning.
Signed-off-by: Leonardo Bras <leonardo@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190802133914.30413-1-leonardo@linux.ibm.com
The FSF does not reside in "675 Mass Ave, Cambridge" anymore...
let's simply use proper SPDX identifiers instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190828060737.32531-1-thuth@redhat.com
arch/powerpc/platforms/cell/spufs/inode.c:201:22:
warning: variable ctx set but not used [-Wunused-but-set-variable]
It is not used since commit 67cba9fd64 ("move
spu_forget() into spufs_rmdir()")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191023134423.15052-1-yuehaibing@huawei.com
The callback function of call_rcu() just calls a kfree(), so we
can use kfree_rcu() instead of call_rcu() + callback function.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190711141818.18044-1-yuehaibing@huawei.com
Fix sparse warnings:
arch/powerpc/platforms/powernv/opal-psr.c:20:1:
warning: symbol 'psr_mutex' was not declared. Should it be static?
arch/powerpc/platforms/powernv/opal-psr.c:27:3:
warning: symbol 'psr_attrs' was not declared. Should it be static?
arch/powerpc/platforms/powernv/opal-powercap.c:20:1:
warning: symbol 'powercap_mutex' was not declared. Should it be static?
arch/powerpc/platforms/powernv/opal-sensor-groups.c:20:1:
warning: symbol 'sg_mutex' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190702131733.44100-1-yuehaibing@huawei.com
Remove .owner field if calls are used which set it automatically
Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190218133950.95225-1-yuehaibing@huawei.com
There is no need to have the 'struct dentry *vpa_dir' variable static
since new value always be assigned before use it.
Fixes: c6c26fb55e ("powerpc/pseries: Export raw per-CPU VPA data via debugfs")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190218125644.87448-1-yuehaibing@huawei.com
Use DEFINE_DEBUGFS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTRIBUTE
for debugfs files.
Semantic patch information:
Rationale: DEFINE_SIMPLE_ATTRIBUTE + debugfs_create_file()
imposes some significant overhead as compared to
DEFINE_DEBUGFS_ATTRIBUTE + debugfs_create_file_unsafe().
Generated by: scripts/coccinelle/api/debugfs/debugfs_simple_attr.cocci
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1545705876-63132-1-git-send-email-yuehaibing@huawei.com
rtas_parse_epow_errlog() should pass 'modifier' to
handle_system_shutdown, because event modifier only use
bottom 4 bits.
Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191023134838.21280-1-yuehaibing@huawei.com
Let's allow to test the implementation without needing HW support.
When "simulate=1" is specified when loading the module, we bypass all
HW checks and HW calls. The sysfs file "simulate_loan_target_kb" can
be used to simulate HW requests.
The simualtion mode can be activated using:
modprobe cmm debug=1 simulate=1
And the requested loan target can be changed using:
echo X > /sys/devices/system/cmm/cmm0/simulate_loan_target_kb
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191031142933.10779-11-david@redhat.com
balloon_page_alloc() will use GFP_HIGHUSER_MOVABLE in case we have
CONFIG_BALLOON_COMPACTION. This is now possible, as balloon pages are
movable with CONFIG_BALLOON_COMPACTION. Without
CONFIG_BALLOON_COMPACTION, GFP_HIGHUSER is used.
Note that apart from that, balloon_page_alloc() uses the following
flags:
__GFP_NOMEMALLOC | __GFP_NORETRY | __GFP_NOWARN
And current code used:
GFP_NOIO | __GFP_NOWARN | __GFP_NORETRY | __GFP_NOMEMALLOC
GFP_HIGHUSER/GFP_HIGHUSER_MOVABLE include
__GFP_RECLAIM | __GFP_IO | __GFP_FS | __GFP_HARDWALL | __GFP_HIGHMEM
GFP_NOIO is __GFP_RECLAIM.
With CONFIG_BALLOON_COMPACTION, we essentially add:
__GFP_IO | __GFP_FS | __GFP_HARDWALL | __GFP_HIGHMEM | __GFP_MOVABLE
Without CONFIG_BALLOON_COMPACTION, we essentially add:
__GFP_IO | __GFP_FS | __GFP_HARDWALL | __GFP_HIGHMEM
I assume this is fine, as this is what all other balloon compaction
users use. If it turns out to be a problem, we could add __GFP_MOVABLE
manually if we have CONFIG_BALLOON_COMPACTION.
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191031142933.10779-10-david@redhat.com
We can now get rid of the cmm_lock and completely rely on the balloon
compaction internals, which now also manage the page list and the
lock.
Inflated/"loaned" pages are now movable. Memory blocks that contain
such pages can get offlined. Also, all such pages will be marked
PageOffline() and can therefore be excluded in memory dumps using
recent versions of makedumpfile.
Don't switch to balloon_page_alloc() yet (due to the GFP_NOIO). Will
do that separately to discuss this change in detail.
Signed-off-by: David Hildenbrand <david@redhat.com>
[mpe: Add isolated_pages-- in cmm_migratepage() as suggested by David]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191031142933.10779-9-david@redhat.com
When switching to balloon compaction, we want to drop the cmm_lock and
completely rely on the balloon compaction list lock internally.
loaned_pages is currently protected under the cmm_lock.
Note: Right now cmm_alloc_pages() and cmm_free_pages() can be called
at the same time, e.g., via the thread and a concurrent OOM notifier.
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191031142933.10779-8-david@redhat.com
The memory isolate notifier was added to allow to offline memory
blocks that contain inflated/"loaned" pages. We can achieve the same
using the balloon compaction framework.
Get rid of the memory isolate notifier. Also, we can get rid of
cmm_mem_going_offline(), as we will never reach that code path now
when we have allocated memory in the balloon (allocated pages are
unmovable and will no longer be special-cased using the memory
isolation notifier).
Leave the memory notifier in place, so we can still back off in case
memory gets offlined.
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191031142933.10779-7-david@redhat.com
adjust_managed_page_count() performs a totalram_pages_add(), but also
adjusts the managed pages of the zone. Let's use that instead, similar
to virtio-balloon. Use it before freeing a page.
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191031142933.10779-6-david@redhat.com
We can simply store the pages in a list (page->lru), no need for a
separate data structure (+ complicated handling). This is how most
other balloon drivers store allocated pages without additional
tracking data.
For the notifiers, use page_to_pfn() to check if a page is in the
applicable range. Use page_to_phys() in plpar_page_set_loaned() and
plpar_page_set_active() (I assume due to the __pa() that's the right
thing to do).
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191031142933.10779-5-david@redhat.com
When unloading the module, one gets
------------[ cut here ]------------
Device 'cmm0' does not have a release() function, it is broken and must be fixed. See Documentation/kobject.txt.
WARNING: CPU: 0 PID: 19308 at drivers/base/core.c:1244 .device_release+0xcc/0xf0
...
We only have one static fake device. There is nothing to do when
releasing the device (via cmm_exit()).
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191031142933.10779-2-david@redhat.com
Older firmwares provided information about Dynamic Reconfig
Connectors (DRC) through several device tree properties, namely
ibm,drc-types, ibm,drc-indexes, ibm,drc-names, and
ibm,drc-power-domains. New firmwares have the ability to present this
same information in a much condensed format through a device tree
property called ibm,drc-info.
The existing cpu DLPAR hotplug code only understands the older DRC
property format when validating the drc-index of a cpu during a
hotplug add. This updates those code paths to use the ibm,drc-info
property, when present, instead for validation.
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1573449697-5448-4-git-send-email-tyreld@linux.ibm.com
There are a couple subtle errors in the mapping between cpu-ids and a
cpus associated drc-index when using the new ibm,drc-info property.
The first is that while drc-info may have been a supported firmware
feature at boot it is possible we have migrated to a CEC with older
firmware that doesn't support the ibm,drc-info property. In that case
the device tree would have been updated after migration to remove the
ibm,drc-info property and replace it with the older style ibm,drc-*
properties for types, indexes, names, and power-domains. PAPR even
goes as far as dictating that if we advertise support for drc-info
that we are capable of supporting either property type at runtime.
The second is that the first value of the ibm,drc-info property is
the int encoded count of drc-info entries. As such "value" returned
by of_prop_next_u32() is pointing at that count, and not the first
element of the first drc-info entry as is expected by the
of_read_drc_info_cell() helper.
Fix the first by ignoring DRC-INFO firmware feature and instead
testing directly for ibm,drc-info, and then falling back to the
old style ibm,drc-indexes in the case it doesn't exit.
Fix the second by incrementing value to the next element prior to
parsing drc-info entries.
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1573449697-5448-3-git-send-email-tyreld@linux.ibm.com
The ibm,drc-info property is an array property that contains drc-info
entries such that each entry is made up of 2 string encoded elements
followed by 5 int encoded elements. The of_read_drc_info_cell()
helper contains comments that correctly name the expected elements
and their encoding. However, the usage of of_prop_next_string() and
of_prop_next_u32() introduced a subtle skippage of the first u32.
This is a result of of_prop_next_string() returning a pointer to the
next property value which is not a string, but actually a (__be32 *).
As, a result the following call to of_prop_next_u32() passes over the
current int encoded value and actually stores the next one wrongly.
Simply endian swap the current value in place after reading the first
two string values. The remaining int encoded values can then be read
correctly using of_prop_next_u32().
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1573449697-5448-2-git-send-email-tyreld@linux.ibm.com
Merge the secureboot support, as well as the IMA changes needed to
support it.
From Nayna's cover letter:
In order to verify the OS kernel on PowerNV systems, secure boot
requires X.509 certificates trusted by the platform. These are
stored in secure variables controlled by OPAL, called OPAL secure
variables. In order to enable users to manage the keys, the secure
variables need to be exposed to userspace.
OPAL provides the runtime services for the kernel to be able to
access the secure variables. This patchset defines the kernel
interface for the OPAL APIs. These APIs are used by the hooks, which
load these variables to the keyring and expose them to the userspace
for reading/writing.
Overall, this patchset adds the following support:
* expose secure variables to the kernel via OPAL Runtime API interface
* expose secure variables to the userspace via kernel sysfs interface
* load kernel verification and revocation keys to .platform and
.blacklist keyring respectively.
The secure variables can be read/written using simple linux
utilities cat/hexdump.
For example:
Path to the secure variables is: /sys/firmware/secvar/vars
Each secure variable is listed as directory.
$ ls -l
total 0
drwxr-xr-x. 2 root root 0 Aug 20 21:20 db
drwxr-xr-x. 2 root root 0 Aug 20 21:20 KEK
drwxr-xr-x. 2 root root 0 Aug 20 21:20 PK
The attributes of each of the secure variables are (for example: PK):
$ ls -l
total 0
-r--r--r--. 1 root root 4096 Oct 1 15:10 data
-r--r--r--. 1 root root 65536 Oct 1 15:10 size
--w-------. 1 root root 4096 Oct 1 15:12 update
The "data" is used to read the existing variable value using
hexdump. The data is stored in ESL format. The "update" is used to
write a new value using cat. The update is to be submitted as AUTH
file.
The X.509 certificates trusted by the platform and required to secure
boot the OS kernel are wrapped in secure variables, which are
controlled by OPAL.
This patch adds firmware/kernel interface to read and write OPAL
secure variables based on the unique key.
This support can be enabled using CONFIG_OPAL_SECVAR.
Signed-off-by: Claudio Carvalho <cclaudio@linux.ibm.com>
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
Signed-off-by: Eric Richter <erichte@linux.ibm.com>
[mpe: Make secvar_ops __ro_after_init, only build opal-secvar.c if PPC_SECURE_BOOT=y]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1573441836-3632-2-git-send-email-nayna@linux.ibm.com
For dma-direct we know that the DMA address is an encoding of the
physical address that we can trivially decode. Use that fact to
provide implementations that do not need the arch_dma_coherent_to_pfn
architecture hook. Note that we still can only support mmap of
non-coherent memory only if the architecture provides a way to set an
uncached bit in the page tables. This must be true for architectures
that use the generic remap helpers, but other architectures can also
manually select it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Max Filippov <jcmvbkbc@gmail.com>
dlpar_online_cpu() attempts to online all threads of a core that has
been added to an LPAR. If onlining a non-primary thread
fails (e.g. due to an allocation failure), the core is left with at
least one thread online. dlpar_cpu_add() attempts to roll back the
whole operation, releasing the core back to the platform. However,
since some threads of the core being removed are still online, the
BUG_ON(cpu_online(cpu)) in pseries_remove_processor() strikes:
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
Modules linked in:
CPU: 3 PID: 8587 Comm: drmgr Not tainted 5.3.0-rc2-00190-g9b123d1ea237-dirty #46
NIP: c0000000000eeb2c LR: c0000000000eeac4 CTR: c0000000000ee9e0
REGS: c0000001f745b6c0 TRAP: 0700 Not tainted (5.3.0-rc2-00190-g9b123d1ea237-dirty)
MSR: 800000010282b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE,TM[E]> CR: 44002448 XER: 00000000
CFAR: c00000000195d718 IRQMASK: 0
GPR00: c0000000000eeac4 c0000001f745b950 c0000000032f6200 0000000000000008
GPR04: 0000000000000008 c000000003349c78 0000000000000040 00000000000001ff
GPR08: 0000000000000008 0000000000000000 0000000000000001 0007ffffffffffff
GPR12: 0000000084002844 c00000001ecacb80 0000000000000000 0000000000000000
GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR20: 0000000000000000 0000000000000000 0000000000000000 0000000000000008
GPR24: c000000003349ee0 c00000000334a2e4 c0000000fca4d7a8 c000000001d20048
GPR28: 0000000000000001 ffffffffffffffff ffffffffffffffff c0000000fca4d7c4
NIP [c0000000000eeb2c] pseries_smp_notifier+0x14c/0x2e0
LR [c0000000000eeac4] pseries_smp_notifier+0xe4/0x2e0
Call Trace:
[c0000001f745b950] [c0000000000eeac4] pseries_smp_notifier+0xe4/0x2e0 (unreliable)
[c0000001f745ba10] [c0000000001ac774] notifier_call_chain+0xb4/0x190
[c0000001f745bab0] [c0000000001ad62c] blocking_notifier_call_chain+0x7c/0xb0
[c0000001f745baf0] [c00000000167bda0] of_detach_node+0xc0/0x110
[c0000001f745bb50] [c0000000000e7ae4] dlpar_detach_node+0x64/0xa0
[c0000001f745bb80] [c0000000000edefc] dlpar_cpu_add+0x31c/0x360
[c0000001f745bc10] [c0000000000ee980] dlpar_cpu_probe+0x50/0xb0
[c0000001f745bc50] [c00000000002cf70] arch_cpu_probe+0x40/0x70
[c0000001f745bc70] [c000000000ccd808] cpu_probe_store+0x48/0x80
[c0000001f745bcb0] [c000000000cbcef8] dev_attr_store+0x38/0x60
[c0000001f745bcd0] [c00000000059c980] sysfs_kf_write+0x70/0xb0
[c0000001f745bd10] [c00000000059afb8] kernfs_fop_write+0xf8/0x280
[c0000001f745bd60] [c0000000004b437c] __vfs_write+0x3c/0x70
[c0000001f745bd80] [c0000000004b8710] vfs_write+0xd0/0x220
[c0000001f745bdd0] [c0000000004b8acc] ksys_write+0x7c/0x140
[c0000001f745be20] [c00000000000bbd8] system_call+0x5c/0x68
Move dlpar_offline_cpu() up in the file so that dlpar_online_cpu() can
use it to re-offline any threads that have been onlined when an error
is encountered.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Fixes: e666ae0b10 ("powerpc/pseries: Update CPU hotplug error recovery")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191016183611.10867-3-nathanl@linux.ibm.com
Remove some stray blank lines, convert a printk to pr_warn, and
address a line length violation.
One functional change: use WARN_ON instead of BUG_ON in case H_PROD of
a ceded thread yields an unexpected result from the platform. We can
expect this code path to get uninterruptibly stuck in __cpu_die() if
this happens, but that's more desirable than crashing.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Fixes: b6db63d1a7 ("pseries/pseries: Add code to online/offline CPUs of a DLPAR node")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191016183611.10867-2-nathanl@linux.ibm.com
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Naveen N. Rao" <naveen.n.rao@linux.vnet.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-kernel@vger.kernel.org
Link: https://lore.kernel.org/r/20191014101642.GA30179@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit e78a7614f3 ("idle: Prevent late-arriving interrupts from
disrupting offline") changes arch_cpu_idle_dead to be called with
interrupts disabled, which triggers the WARN in pnv_smp_cpu_kill_self.
Fix this by fixing up irq_happened after hard disabling, rather than
requiring there are no pending interrupts, similarly to what was done
done until commit 2525db04d1 ("powerpc/powernv: Simplify lazy IRQ
handling in CPU offline").
Fixes: e78a7614f3 ("idle: Prevent late-arriving interrupts from disrupting offline")
Reported-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Add unexpected_mask rather than checking for known bad values,
change the WARN_ON() to a WARN_ON_ONCE()]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191022115814.22456-1-npiggin@gmail.com
With bolted hash page table entry, kernel currently only use primary hash group
when inserting the hash page table entry. In the rare case where kernel find all the
8 primary hash slot occupied by bolted entries, this can result in hash page
table insert failure for bolted entries. Avoid this by using the secondary hash
group.
This is different from what kernel does for the non-bolted mapping. With
non-bolted entries kernel will try secondary before removing an existing entry
from hash page table group. With bolted prefer primary hash group and hence
try to insert the page table entry by removing a slot from primary before trying
the secondary hash group.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191024093542.29777-3-aneesh.kumar@linux.ibm.com
Recent cleanup in the way EEH support is added to a device causes a
kernel oops when the cxl driver probes a device and creates virtual
devices discovered on the FPGA:
BUG: Kernel NULL pointer dereference at 0x000000a0
Faulting instruction address: 0xc000000000048070
Oops: Kernel access of bad area, sig: 7 [#1]
...
NIP eeh_add_device_late.part.9+0x50/0x1e0
LR eeh_add_device_late.part.9+0x3c/0x1e0
Call Trace:
_dev_info+0x5c/0x6c (unreliable)
pnv_pcibios_bus_add_device+0x60/0xb0
pcibios_bus_add_device+0x40/0x60
pci_bus_add_device+0x30/0x100
pci_bus_add_devices+0x64/0xd0
cxl_pci_vphb_add+0xe0/0x130 [cxl]
cxl_probe+0x504/0x5b0 [cxl]
local_pci_probe+0x6c/0x110
work_for_cpu_fn+0x38/0x60
The root cause is that those cxl virtual devices don't have a
representation in the device tree and therefore no associated pci_dn
structure. In eeh_add_device_late(), pdn is NULL, so edev is NULL and
we oops.
We never had explicit support for EEH for those virtual devices.
Instead, EEH events are reported to the (real) pci device and handled
by the cxl driver. Which can then forward to the virtual devices and
handle dependencies. The fact that we try adding EEH support for the
virtual devices is new and a side-effect of the recent cleanup.
This patch fixes it by skipping adding EEH support on powernv for
devices which don't have a pci_dn structure.
The cxl driver doesn't create virtual devices on pseries so this patch
doesn't fix it there intentionally.
Fixes: b905f8cdca ("powerpc/eeh: EEH for pSeries hot plug")
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191016162833.22509-1-fbarrat@linux.ibm.com
All watchdog drivers implement the same set of ioctl commands, and
fortunately all of them are compatible between 32-bit and 64-bit
architectures.
Modern drivers always go through drivers/watchdog/wdt.c as an abstraction
layer, but older ones implement their own file_operations on a character
device for this.
Move the handling from fs/compat_ioctl.c into the individual drivers.
Note that most of the legacy drivers will never be used on 64-bit
hardware, because they are for an old 32-bit SoC implementation, but
doing them all at once is safer than trying to guess which ones do
or do not need the compat_ioctl handling.
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
When issuing a BMC soft poweroff during IPL, the poweroff can be lost
so the machine would not poweroff.
This is because opal messages can be received before the opal-power
code registered its notifiers.
Fix it by buffering messages. If we receive a message and do not yet
have a handler for that type, store the message and replay when a
handler for that type is registered.
Signed-off-by: Deb McLemore <debmc@linux.vnet.ibm.com>
[mpe: Single unlock path in opal_message_notifier_register(), tweak
comments/formatting and change log.]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1526868278-4204-1-git-send-email-debmc@linux.vnet.ibm.com
The spu_fs_context was not set in fc->fs_private, this caused a crash
when accessing ctx->mode in spufs_create_root().
Fixes: d2e0981c3b ("vfs: Convert spufs to use the new mount API")
Signed-off-by: Emmanuel Nicolet <emmanuel.nicolet@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20191008141342.GA266797@gmail.com
A validation check to prevent out of bounds read/write inside
functions papr_scm_meta_{get,set}() is off-by-one that prevent reads
and writes to the last byte of the label area.
This bug manifests as a failure to probe a dimm when libnvdimm is
unable to read the entire config-area as advertised by
ND_CMD_GET_CONFIG_SIZE. This usually happens when there are large
number of namespaces created in the region backed by the dimm and the
label-index spans max possible config-area. An error of the form below
usually reported in the kernel logs:
[ 255.293912] nvdimm: probe of nmem0 failed with error -22
The patch fixes these validation checks there by letting libnvdimm
access the entire config-area.
Fixes: 53e80bd042773('powerpc/nvdimm: Add support for multibyte read/write for metadata')
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190927062002.3169-1-vaibhav@linux.ibm.com
Since commit 1211ee61b4 ("powerpc/pseries: Read TLB Block Invalidate
Characteristics"), a warning message is displayed when booting a guest
on top of KVM:
lpar: arch/powerpc/platforms/pseries/lpar.c pseries_lpar_read_hblkrm_characteristics Error calling get-system-parameter (0xfffffffd)
This message is displayed because this hypervisor is not supporting
the H_BLOCK_REMOVE hcall and thus is not exposing the corresponding
feature.
Reading the TLB Block Invalidate Characteristics should not be done if
the feature is not exposed.
Fixes: 1211ee61b4 ("powerpc/pseries: Read TLB Block Invalidate Characteristics")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191001132928.72555-1-ldufour@linux.ibm.com
