mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-23 20:24:12 +08:00
9519793bb6
5266 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
b8ec70ab66 |
- New Drivers
- Add support for TI TPS6594/TPS6593/LP8764 PMICs
- Add support for Samsung RT5033 Battery Charger
- Add support for Analog Devices MAX77540 and MAX77541 PMICs
- New Device Support
- Add support for SPI to Rockchip RK808 (and friends)
- Add support for AXP192 PMIC to X-Powers AXP20X
- Add support for AXP313a PMIC to X-Powers AXP20X
- Add support for RK806 to Rockchip RK8XX
- Removed Device Support
- Removed MFD support for Richtek RT5033 Battery
- Fix-ups
- Remove superfluous code
- Switch I2C drivers from .probe_new() to .probe()
- Convert over to managed resources (devm_*(), etc)
- Use dev_err_probe() for returning errors from .probe()
- Add lots of Device Tree bindings / support
- Improve cache efficiency by switching to Maple
- Use own exported namespaces (NS)
- Include missing and remove superfluous headers
- Start using / convert to the new shutdown sys-off API
- Trivial: variable / define renaming
- Make use of of_property_read_reg() when requesting DT 'reg's
- Bug Fixes
- Fix chip revision readout due to incorrect data masking
- Amend incorrect register and mask values used for charger state
- Hide unused functionality at compile time
- Fix resource leaks following error handling routines
- Return correct error values and fix error handling in general
- Repair incorrect device names - used for device matching
- Remedy broken module auto-loading
-----BEGIN PGP SIGNATURE-----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=EmOj
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Drivers:
- Add support for TI TPS6594/TPS6593/LP8764 PMICs
- Add support for Samsung RT5033 Battery Charger
- Add support for Analog Devices MAX77540 and MAX77541 PMICs
New Device Support:
- Add support for SPI to Rockchip RK808 (and friends)
- Add support for AXP192 PMIC to X-Powers AXP20X
- Add support for AXP313a PMIC to X-Powers AXP20X
- Add support for RK806 to Rockchip RK8XX
Removed Device Support:
- Removed MFD support for Richtek RT5033 Battery
Fix-ups:
- Remove superfluous code
- Switch I2C drivers from .probe_new() to .probe()
- Convert over to managed resources (devm_*(), etc)
- Use dev_err_probe() for returning errors from .probe()
- Add lots of Device Tree bindings / support
- Improve cache efficiency by switching to Maple
- Use own exported namespaces (NS)
- Include missing and remove superfluous headers
- Start using / convert to the new shutdown sys-off API
- Trivial: variable / define renaming
- Make use of of_property_read_reg() when requesting DT 'reg's
Bug Fixes:
- Fix chip revision readout due to incorrect data masking
- Amend incorrect register and mask values used for charger state
- Hide unused functionality at compile time
- Fix resource leaks following error handling routines
- Return correct error values and fix error handling in general
- Repair incorrect device names - used for device matching
- Remedy broken module auto-loading"
* tag 'mfd-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (51 commits)
dt-bindings: mfd: max77541: Add ADI MAX77541/MAX77540
iio: adc: max77541: Add ADI MAX77541 ADC Support
regulator: max77541: Add ADI MAX77541/MAX77540 Regulator Support
dt-bindings: regulator: max77541: Add ADI MAX77541/MAX77540 Regulator
mfd: Switch two more drivers back to use struct i2c_driver::probe
dt-bindings: mfd: samsung,s5m8767: Simplify excluding properties
mfd: stmpe: Only disable the regulators if they are enabled
mfd: max77541: Add ADI MAX77541/MAX77540 PMIC Support
dt-bindings: mfd: gateworks-gsc: Remove unnecessary fan-controller nodes
mfd: core: Use of_property_read_reg() to parse "reg"
mfd: stmfx: Nullify stmfx->vdd in case of error
mfd: stmfx: Fix error path in stmfx_chip_init
mfd: intel-lpss: Add missing check for platform_get_resource
mfd: stpmic1: Add PMIC poweroff via sys-off handler
mfd: stpmic1: Fixup main control register and bits naming
dt-bindings: mfd: qcom,tcsr: Add the compatible for IPQ8074
mfd: tps65219: Add support for soft shutdown via sys-off API
mfd: pm8008: Drop bogus i2c module alias
mfd: pm8008: Fix module autoloading
mfd: tps65219: Add GPIO cell instance
...
|
||
|
Linus Torvalds
|
e5476f57b3 |
gpio updates for v6.5
Core GPIO library:
- remove unused symbols
- don't spam the kernel log with messages about hogs
- remove old sysfs API cruft
- improve handling of GPIO masks
New drivers
- add a driver for the BlueField-3 GPIO controller
- add GPIO support for the TPS65219 PMIC
Driver improvements:
- extend the gpio-aggregator driver to support ramp-up/ramp-down delay
- remove unnecessary CONFIG_OF guards from gpio-aggregator
- readability improvements in gpio-tangier
- switch i2c drivers back to using probe() now that it's been converted in
the i2c subsystem to not taking the id parameter
- remove unused inclusions of of_gpio.h in several drivers
- make pm ops static in gpio-davinci and fix a comment
- use more devres in drivers to shrink and simplify the code
- add missing include in gpio-sa1100
- add HAS_IOPORT KConfig dependency where needed
- add permissions checks before accessing pins in gpio-tegra186
- convert the gpio-zynq driver to using immutable irqchips
- preserve output settings set by the bootloader in gpio-mpc8xxx
Selftests:
- tweak the variable naming in script tests
Device tree updates:
- convert gpio-mmio and gpio-stmpe to YAML
- add parsing of GPIO hogs to gpio-vf610
- add bindings for the Cirrus EP93xx GPIO controller
- add gpio-line-names property to the gpio-pca9570 bindings
- extend the binding for x-powers,axp209 with another block
-----BEGIN PGP SIGNATURE-----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=3KNJ
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"We have two new drivers, some improvements to the core code, lots of
different updates to existing GPIO drivers and some dt-bindings on
top.
There's nothing controversial in here and almost everything has been
in next for more than a week (95% a lot longer than this). The only
thing that has spent less time in next is a new driver so no risk of
regressions.
The single merge pulls in changes that remove all usage of global GPIO
numbers from arch/arm/mach-omap.
Core GPIO library:
- remove unused symbols
- don't spam the kernel log with messages about hogs
- remove old sysfs API cruft
- improve handling of GPIO masks
New drivers:
- add a driver for the BlueField-3 GPIO controller
- add GPIO support for the TPS65219 PMIC
Driver improvements:
- extend the gpio-aggregator driver to support ramp-up/ramp-down
delay
- remove unnecessary CONFIG_OF guards from gpio-aggregator
- readability improvements in gpio-tangier
- switch i2c drivers back to using probe() now that it's been
converted in the i2c subsystem to not taking the id parameter
- remove unused inclusions of of_gpio.h in several drivers
- make pm ops static in gpio-davinci and fix a comment
- use more devres in drivers to shrink and simplify the code
- add missing include in gpio-sa1100
- add HAS_IOPORT KConfig dependency where needed
- add permissions checks before accessing pins in gpio-tegra186
- convert the gpio-zynq driver to using immutable irqchips
- preserve output settings set by the bootloader in gpio-mpc8xxx
Selftests:
- tweak the variable naming in script tests
Device tree updates:
- convert gpio-mmio and gpio-stmpe to YAML
- add parsing of GPIO hogs to gpio-vf610
- add bindings for the Cirrus EP93xx GPIO controller
- add gpio-line-names property to the gpio-pca9570 bindings
- extend the binding for x-powers,axp209 with another block"
* tag 'gpio-updates-for-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (58 commits)
of: unittest: drop assertions for GPIO hog messages
gpiolib: Drop unused domain_ops memeber of GPIO IRQ chip
gpio: synq: remove unused zynq_gpio_irq_reqres/zynq_gpio_irq_relres
dt-bindings: gpio: gpio-vf610: Add parsing of hogs
gpio: lpc18xx: Remove unused of_gpio.h inclusion
gpio: xra1403: Remove unused of_gpio.h inclusion
gpio: mpc8xxx: Remove unused of_gpio.h inclusion
dt-bindings: gpio: Add Cirrus EP93xx
gpio: mpc8xxx: latch GPIOs state on module load when configured as output
selftests: gpio: gpio-sim: Use same variable name for sysfs pathname
gpio: mlxbf3: Add gpio driver support
gpio: delay: Remove duplicative functionality
gpio: aggregator: Set up a parser of delay line parameters
gpio: aggregator: Support delay for setting up individual GPIOs
gpio: aggregator: Remove CONFIG_OF and of_match_ptr() protections
dt-bindings: gpio: pca9570: add gpio-line-names property
gpiolib: remove unused gpio_cansleep()
gpio: tps65219: add GPIO support for TPS65219 PMIC
gpio: zynq: fix zynqmp_gpio not an immutable chip warning
gpio: davinci: make davinci_gpio_dev_pm_ops static
...
|
||
Uwe Kleine-König
|
a6b6790c02 |
mfd: Switch two more drivers back to use struct i2c_driver::probe
struct i2c_driver::probe_new is about to go away. Switch the driver to use the probe callback with the same prototype. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230626091941.557733-1-u.kleine-koenig@pengutronix.de Signed-off-by: Lee Jones <lee@kernel.org> |
||
Christophe JAILLET
|
104d32bd81 |
mfd: stmpe: Only disable the regulators if they are enabled
In stmpe_probe(), if some regulator_enable() calls fail, probing continues
and there is only a dev_warn().
So, if stmpe_probe() is called the regulator may not be enabled. It is
cleaner to test it before calling regulator_disable() in the remove
function.
Fixes:
|
||
Okan Sahin
|
e0cbc20238 |
mfd: max77541: Add ADI MAX77541/MAX77540 PMIC Support
MFD driver for MAX77541/MAX77540 to enable its sub devices. The MAX77541 is a multi-function devices. It includes buck converter and ADC. The MAX77540 is a high-efficiency buck converter with two 3A switching phases. They have same regmap except for ADC part of MAX77541. Signed-off-by: Okan Sahin <okan.sahin@analog.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230412111256.40013-6-okan.sahin@analog.com Signed-off-by: Lee Jones <lee@kernel.org> |
||
Rob Herring
|
c7fe3bbfd6 |
mfd: core: Use of_property_read_reg() to parse "reg"
Use the recently added of_property_read_reg() helper to get the untranslated "reg" address value. Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230609183159.1766429-1-robh@kernel.org Signed-off-by: Lee Jones <lee@kernel.org> |
||
Amelie Delaunay
|
7c81582c0b |
mfd: stmfx: Nullify stmfx->vdd in case of error
Nullify stmfx->vdd in case devm_regulator_get_optional() returns an error.
And simplify code by returning an error only if return code is not -ENODEV,
which means there is no vdd regulator and it is not an issue.
Fixes:
|
||
|
Amelie Delaunay
|
f592cf6245 |
mfd: stmfx: Fix error path in stmfx_chip_init
In error path, disable vdd regulator if it exists, but don't overload ret.
Because if regulator_disable() is successful, stmfx_chip_init will exit
successfully while chip init failed.
Fixes:
|
||
Jiasheng Jiang
|
d918e0d582 |
mfd: intel-lpss: Add missing check for platform_get_resource
Add the missing check for platform_get_resource and return error
if it fails.
Fixes:
|
||
Sean Nyekjaer
|
6e9df38f35 |
mfd: stpmic1: Add PMIC poweroff via sys-off handler
Use devm_register_sys_off_handler() that allows to register multiple power-off handlers. This will allow boards using the stpmic1 to power-off. Signed-off-by: Sean Nyekjaer <sean@geanix.com> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230602062426.3947116-2-sean@geanix.com |
||
|
Sean Nyekjaer
|
48b4371b98 |
mfd: stpmic1: Fixup main control register and bits naming
Fixup main control register and bits naming so the match the naming from the datasheet. https://www.st.com/resource/en/datasheet/stpmic1.pdf Signed-off-by: Sean Nyekjaer <sean@geanix.com> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230602062426.3947116-1-sean@geanix.com |
||
Jerome Neanne
|
3df4c63675 |
mfd: tps65219: Add support for soft shutdown via sys-off API
Use new API for power-off mode support: Link: https://lwn.net/Articles/894511/ Link: https://lore.kernel.org/all/7hfseqa7l0.fsf@baylibre.com/ sys-off API allows support of shutdown handler and restart handler. Shutdown was not supported before that enhancement. This is required for platform that are not using PSCI. Test: - restart: # reboot Default is cold reset: # cat /sys/kernel/reboot/mode Switch boot mode to warm reset: # echo warm > /sys/kernel/reboot/mode - power-off: # halt Tested on AM62-LP-SK board. Signed-off-by: Jerome Neanne <jneanne@baylibre.com> Suggested-by: Andrew Davis <afd@ti.com> Reviewed-by: Andrew Davis <afd@ti.com> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230608071947.3467751-1-jneanne@baylibre.com |
||
Johan Hovold
|
95100ed6ad |
mfd: pm8008: Drop bogus i2c module alias
Prior to commit
|
||
|
Johan Hovold
|
d420c9886f |
mfd: pm8008: Fix module autoloading
Add the missing module device table alias to that the driver can be
autoloaded when built as a module.
Cc: stable@vger.kernel.org # 5.14
Fixes:
|
||
|
Jerome Neanne
|
29e92d8ea8 |
mfd: tps65219: Add GPIO cell instance
TPS65219 PMIC GPIOs are exposed in a standard way: gpiodetect gpiochip0 [tps65219-gpio] (3 lines) tps65219-gpios is incorrect cell name (plural). Changed to tps65219-gpio (singular) Co-developed-by: Jonathan Cormier <jcormier@criticallink.com> Signed-off-by: Jonathan Cormier <jcormier@criticallink.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jerome Neanne <jneanne@baylibre.com> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230511-tps65219-add-gpio-support-v5-2-ebb94281c854@baylibre.com |
||
Dan Carpenter
|
cc5f2eb7ce |
mfd: tps6594: Fix an error code in probe()
These error paths accidentally return success when they should return
-EINVAL.
Fixes:
|
||
|
Christophe JAILLET
|
26e4462d7c |
mfd: wcd934x: Simplify with dev_err_probe()
Use dev_err_probe() to simplify code, save a few LoC and be consistent with error codes handling in messages. It also filters -EPROBE_DEFER that can be returned by devm_clk_get(). Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/73fdc6ecf619f80fad126abca11fb579d3d87f64.1684565021.git.christophe.jaillet@wanadoo.fr Signed-off-by: Lee Jones <lee@kernel.org> |
||
|
Christophe JAILLET
|
f190b4891a |
mfd: wcd934x: Fix an error handling path in wcd934x_slim_probe()
If devm_gpiod_get_optional() fails, some resources need to be released, as
already done in the .remove() function.
While at it, remove the unneeded error code from a dev_err_probe() call.
It is already added in a human readable way by dev_err_probe() itself.
Fixes:
|
||
Arnd Bergmann
|
9ef18aa8c0 |
mfd: intel-lpss: Hide suspend/resume functions in #ifdef
When CONFIG_PM is disabled, the prototypes for these two functions
are not visible:
drivers/mfd/intel-lpss.c:482:5: error: no previous prototype for 'intel_lpss_suspend' [-Werror=missing-prototypes]
482 | int intel_lpss_suspend(struct device *dev)
| ^~~~~~~~~~~~~~~~~~
drivers/mfd/intel-lpss.c:503:5: error: no previous prototype for 'intel_lpss_resume' [-Werror=missing-prototypes]
503 | int intel_lpss_resume(struct device *dev)
Add the same #ifdef around the definition of the unused functions,
which avoids the warning and slightly reduces the code size.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230516202746.561111-1-arnd@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
||
Aidan MacDonald
|
63eeabbc9d |
mfd: axp20x: Add support for AXP192
The AXP192 PMIC is similar to the AXP202/AXP209, but with different regulators, additional GPIOs, and a different IRQ register layout. Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com> Link: https://lore.kernel.org/r/20230511092609.76183-1-aidanmacdonald.0x0@gmail.com Signed-off-by: Lee Jones <lee@kernel.org> |
||
|
Uwe Kleine-König
|
9816d85923 |
mfd: Switch i2c drivers back to use .probe()
After commit |
||
Guiting Shen
|
0c5dc500ab |
mfd: Remove redundant dev_set_drvdata() from I2C drivers
the i2c_set_clientdata() is the inline function which is complemented by the dev_set_drvdata() internally. Do not need to use i2c_set_clientdata() and dev_set_drvdata() at the same time. Signed-off-by: Guiting Shen <aarongt.shen@gmail.com> Reviewed-by: Johan Hovold <johan@kernel.org> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230425024526.6443-1-aarongt.shen@gmail.com |
||
|
Christophe JAILLET
|
df2aac1573 |
mfd: dln2: Remove the unneeded include <linux/i2c.h>
This driver does not use i2c, so there is no point in including <linux/i2c.h> Remove it. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/baf28e7f0fb57e918b76eaa92b94a2ae1a02cce0.1682318879.git.christophe.jaillet@wanadoo.fr |
||
|
Christophe JAILLET
|
bab5ab4761 |
mfd: rc5t583-irq: Remove the unneeded include <linux/i2c.h>
This driver does not use i2c, so there is no point in including <linux/i2c.h> Remove it and add the needed <linux/device.h> instead, which is much more lightweight. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/128025bf5b81f5424db2202b0c8cfd9722c28aab.1682319383.git.christophe.jaillet@wanadoo.fr |
||
Mark Brown
|
7ef47a12a6 |
mfd: wm831x: Use maple tree register cache
regmap has introduced a maple tree based register cache which makes use of this more advanced data structure which has been added to the kernel recently. Maple trees are much flatter than rbtrees, meaning that they do not grow to such depths when the register map is sparse which makes access a bit more efficient. The maple tree cache type is still a bit of a work in progress but should be effective for some devices already. The wm831x devices have a pretty sparse register map and being always on devices never do cache syncs so don't hit the major current disadvantage so they should be good candiates for using the maple tree cache. Update to do so, there should be little if any visible difference at runtime. Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230419-mfd-wm831x-maple-v1-1-e03e39d7bb0b@kernel.org |
||
Ilpo Järvinen
|
867cae44f8 |
mfd: intel-m10-bmc: Manage access to MAX 10 fw handshake registers
On some MAX 10 cards, the BMC firmware is not available to service handshake registers during secure update erase and write phases at normal speeds. This problem affects at least hwmon driver. When the MAX 10 hwmon driver tries to read the sensor values during a secure update, the reads are slowed down (e.g., reading all D5005 sensors takes ~24s which is magnitudes worse than the normal <0.02s). Manage access to the handshake registers using a rw semaphore and a FW state variable to prevent accesses during those secure update phases and return -EBUSY instead. If handshake_sys_reg_nranges == 0, don't update bwcfw_state as it is not used. This avoids the locking cost. Co-developed-by: Russ Weight <russell.h.weight@intel.com> Signed-off-by: Russ Weight <russell.h.weight@intel.com> Co-developed-by: Xu Yilun <yilun.xu@intel.com> Signed-off-by: Xu Yilun <yilun.xu@intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230417092653.16487-5-ilpo.jarvinen@linux.intel.com |
||
|
Ilpo Järvinen
|
e9c154eed8 |
mfd: intel-m10-bmc: Move m10bmc_sys_read() away from header
Move m10bmc_sys_read() out from the header to prepare it for adding more code into the function which would make it too large to be a static inline any more. While at it, replace the vague wording in function comment with more precise statements. Reviewed-by: Russ Weight <russell.h.weight@intel.com> Acked-by: Guenter Roeck <linux@roeck-us.net> # For hwmon Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Xu Yilun <yilun.xu@intel.com> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230417092653.16487-4-ilpo.jarvinen@linux.intel.com |
||
|
Ilpo Järvinen
|
c452e3bd91 |
mfd: intel-m10-bmc: Create m10bmc_sys_update_bits()
Wrap regmap_update_bits() with m10bmc_sys_update_bits() in order to be able to add additional checks into it. Co-developed-by: Russ Weight <russell.h.weight@intel.com> Signed-off-by: Russ Weight <russell.h.weight@intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Xu Yilun <yilun.xu@intel.com> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230417092653.16487-3-ilpo.jarvinen@linux.intel.com |
||
|
Ilpo Järvinen
|
b3ecc7f383 |
mfd: intel-m10-bmc: Move core symbols to own namespace
Create INTEL_M10_BMC_CORE namespace for symbols exported by intel-m10-bmc-core. Reviewed-by: Russ Weight <russell.h.weight@intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Xu Yilun <yilun.xu@intel.com> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230417092653.16487-2-ilpo.jarvinen@linux.intel.com |
||
Lee Jones
|
425f6a4576 | Merge branches 'tb-mfd-clk-input-pinctrl-power-rtc-sound-6.5', 'ib-mfd-tps6594-core-6.5', 'ib-mfd-regulator-max5970-6.5', 'ib-mfd-regulator-6.5' and 'ib-mfd-power-6.5' into ibs-for-mfd-merged | ||
|
Mark Brown
|
d99df65728 |
mfd: twl6040: Use maple tree register cache
The twl6040 is only capable of performing single register read and write operations which means it gains no advantage from using a rbtree register cache, convert it to using the more modern maple tree register cache instead. This should be more efficient. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20230609-mfd-twl6040-maple-v1-1-3493d051cd6f@kernel.org Signed-off-by: Lee Jones <lee@kernel.org> |
||
Jakob Hauser
|
c4747d7ce3 |
mfd: rt5033: Fix chip revision readout
After reading the data from the DEVICE_ID register, mask 0x0f needs to be applied to extract the revision of the chip [1]. The other part of the DEVICE_ID register, mask 0xf0, is a vendor identification code. That's how it is set up at similar products of Richtek, e.g. RT9455 [2] page 21 top. [1] https://github.com/msm8916-mainline/linux-downstream/blob/GT-I9195I/drivers/mfd/rt5033_core.c#L484 [2] https://www.richtek.com/assets/product_file/RT9455/DS9455-00.pdf Signed-off-by: Jakob Hauser <jahau@rocketmail.com> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/9a98521ffdf76851d5d344afa6ce65f692ecc024.1684182964.git.jahau@rocketmail.com |
||
Stephan Gerhold
|
43db1344e0 |
mfd: rt5033: Drop rt5033-battery sub-device
The fuel gauge in the RT5033 PMIC (rt5033-battery) has its own I2C bus
and interrupt lines. Therefore, it is not part of the MFD device
and needs to be specified separately in the device tree.
Fixes:
|
||
|
Mark Brown
|
2f2f43dd21
|
TI TPS6594 PMIC support (RTC, pinctrl, regulators)
Merge series from Esteban Blanc <eblanc@baylibre.com>: TPS6594 is a Power Management IC which provides regulators and others features like GPIOs, RTC, watchdog, ESMs (Error Signal Monitor), and PFSM (Pre-configurable Finite State Machine). The SoC and the PMIC can communicate through the I2C or SPI interfaces. TPS6594 is the super-set device while TPS6593 and LP8764 are derivatives. This series adds support to TI TPS6594 PMIC and its derivatives. |
||
|
Mark Brown
|
3b88f5fba2
|
regulator: Add X-Powers AXP15060/AXP313a PMIC
Merge series from Andre Przywara <andre.przywara@arm.com>: This patch series adds support for the X-Powers AXP15060 and AXP313a PMIC, which are general purpose PMICs as seen on different boards with different SOCs, mostly from Allwinner. This is mostly a repost of the previous patches, combining both the AXP313a and AXP15060 series, rebased on top of v6.4-rc3, and omitting the patches that already got merged. The first two patches are the successors of the AXP313a v10 post, the third patch is based on Shengyu's AXP15060 v3 post. There were no code changes, just some tiny context differences due to the rebase, plus I added the newly gained tags. As the DT bindings and the AXP15060 MFD part are already in the tree, this is just completing support with the MFD part for the AXP313a, and the regulator support for both PMICs. |
||
Naresh Solanki
|
49f661ba99 |
mfd: max5970: Rename driver and remove wildcard
The previous version of this driver included wildcards in file names and descriptions. This patch renames the driver to only support MAX5970 and MAX5978, which are the only chips that the driver actually supports. Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com> Link: https://lore.kernel.org/r/20230427113046.3971425-1-Naresh.Solanki@9elements.com Signed-off-by: Lee Jones <lee@kernel.org> |
||
Martin Botka
|
75c8cb2f4c |
mfd: axp20x: Add support for AXP313a PMIC
The AXP313a is a PMIC chip produced by X-Powers, it can be connected via an I2C bus. The name AXP1530 seems to appear as well, and this is what is used in the BSP driver. From all we know it's the same chip, just a different name. However we have only seen AXP313a chips in the wild, so go with this name. Compared to the other AXP PMICs it's a rather simple affair: just three DCDC converters, three LDOs, and no battery charging support. Describe the regmap and the MFD bits, along with the registers exposed via I2C. Aside from the various regulators, also describe the power key interrupts, and adjust the shutdown handler routine to use a different register than the other PMICs. Eventually advertise the device using the new compatible string. Signed-off-by: Martin Botka <martin.botka@somainline.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Link: https://lore.kernel.org/r/20230524000012.15028-2-andre.przywara@arm.com Signed-off-by: Lee Jones <lee@kernel.org> |
||
Linus Walleij
|
c32c81f3db |
ARM/mfd/gpio: Fixup TPS65010 regression on OMAP1 OSK1
Aaro reports problems on the OSK1 board after we altered
the dynamic base for GPIO allocations.
It appears this happens because the OMAP driver now
allocates GPIO numbers dynamically, so all that is
references by number is a bit up in the air.
Let's bite the bullet and try to just move the gpio_chip
in the tps65010 MFD driver over to using dynamic allocations.
Alter everything in the OSK1 board file to use a GPIO
descriptor table and lookups.
Utilize the NULL device to define some board-specific
GPIO lookups and use these to immediately look up the
same GPIOs, convert to IRQ numbers and pass as resources
to the devices. This is ugly but should work.
The .setup() callback for tps65010 was used for some GPIO
hogging, but since the OSK1 is the only user in the entire
kernel we can alter the signatures to something that
is helpful and make a clean transition.
Fixes:
|
||
Julien Panis
|
325bec7157 |
mfd: tps6594: Add driver for TI TPS6594 PMIC
This patch adds support for TPS6594 PMIC MFD core. It provides communication through the I2C and SPI interfaces, and supports protocols with embedded CRC data fields for safety applications. Signed-off-by: Julien Panis <jpanis@baylibre.com> Link: https://lore.kernel.org/r/20230511095126.105104-3-jpanis@baylibre.com Signed-off-by: Lee Jones <lee@kernel.org> |
||
Sebastian Reichel
|
210f418f8a |
mfd: rk8xx: Add rk806 support
Add support for SPI connected rk806, which is used by the RK3588 evaluation boards. The PMIC is advertised to support I2C and SPI, but the evaluation boards all use SPI. Thus only SPI support is added here. Tested-by: Diederik de Haas <didi.debian@cknow.org> # Rock64, Quartz64 Model A + B Tested-by: Vincent Legoll <vincent.legoll@gmail.com> # Pine64 QuartzPro64 Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20230504173618.142075-9-sebastian.reichel@collabora.com Signed-off-by: Lee Jones <lee@kernel.org> |
||
|
Sebastian Reichel
|
74413bd611 |
mfd: rk8xx-i2c: Use device_get_match_data
Simplify the device identification logic by supplying the relevant information via of_match_data. This also removes the dev_info() printing the chip version, since that's supplied by the match data now. Due to lack of hardware this change is compile-tested only. Tested-by: Diederik de Haas <didi.debian@cknow.org> # Rock64, Quartz64 Model A + B Tested-by: Vincent Legoll <vincent.legoll@gmail.com> # Pine64 QuartzPro64 Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20230504173618.142075-7-sebastian.reichel@collabora.com Signed-off-by: Lee Jones <lee@kernel.org> |
||
|
Sebastian Reichel
|
c20e8c5b12 |
mfd: rk808: Split into core and i2c
Split rk808 into a core and an i2c part in preparation for SPI support. Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> # for RTC Tested-by: Diederik de Haas <didi.debian@cknow.org> # Rock64, Quartz64 Model A + B Tested-by: Vincent Legoll <vincent.legoll@gmail.com> # Pine64 QuartzPro64 Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20230504173618.142075-6-sebastian.reichel@collabora.com Signed-off-by: Lee Jones <lee@kernel.org> |
||
|
Sebastian Reichel
|
049449976f |
mfd: rk808: Replace 'struct i2c_client' with 'struct device'
Put 'struct device' pointer into the MFD platform_data instead of the 'struct i2c_client' pointer. This simplifies the code and prepares the MFD for SPI support. Tested-by: Diederik de Haas <didi.debian@cknow.org> # Rock64, Quartz64 Model A + B Tested-by: Vincent Legoll <vincent.legoll@gmail.com> # Pine64 QuartzPro64 Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20230504173618.142075-5-sebastian.reichel@collabora.com Signed-off-by: Lee Jones <lee@kernel.org> |
||
|
Sebastian Reichel
|
e714b50bdf |
mfd: rk808: Use dev_err_probe
Use dev_err_probe instead of dev_err in probe function, which simplifies code a little bit and prints the error code. Also drop possibly incorrect printing of chip id registers while touching the error message. Tested-by: Diederik de Haas <didi.debian@cknow.org> # Rock64, Quartz64 Model A + B Tested-by: Vincent Legoll <vincent.legoll@gmail.com> # Pine64 QuartzPro64 Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20230504173618.142075-4-sebastian.reichel@collabora.com Signed-off-by: Lee Jones <lee@kernel.org> |
||
|
Sebastian Reichel
|
4fec8a5a85 |
mfd: rk808: Convert to device managed resources
Fully convert the driver to device managed resources. Tested-by: Diederik de Haas <didi.debian@cknow.org> # Rock64, Quartz64 Model A + B Tested-by: Vincent Legoll <vincent.legoll@gmail.com> # Pine64 QuartzPro64 Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20230504173618.142075-3-sebastian.reichel@collabora.com Signed-off-by: Lee Jones <lee@kernel.org> |
||
|
Linus Torvalds
|
3af49062b0 |
- New Drivers
- Add support for Renesas RZ/G2L MTU3
- New Device Support
- Add support for Lenovo Yoga Book X90F to Intel CHT WC
- Add support for MAX5970 and MAX5978 to Simple MFD (I2C)
- Add support for Meteor Lake PCH-S LPSS PCI to Intel LPSS PCI
- Add support for AXP15060 PMIC to X-Powers PMIC collection
- Remove Device Support
- Remove support for Samsung 5M8751 and S5M8763 PMIC devices
- New Functionality
- Convert deprecated QCOM IRQ Chip to config registers
- Add support for 32-bit address spaces to Renesas SMUs
- Fix-ups
- Make use of APIs / MACROs designed to simplify and demystify
- Add / improve Device Tree bindings
- Memory saving struct layout optimisations
- Remove old / deprecated functionality
- Factor out unassigned register addresses from ranges
- Trivial: Spelling fixes, renames and coding style fixes
- Rid 'defined but not used' warnings
- Remove ineffective casts and pointer stubs
- Bug Fixes
- Fix incorrectly non-inverted mask/unmask IRQs on QCOM platforms
- Remove MODULE_*() helpers from non-tristate drivers
- Do not attempt to use out-of-range memory addresses associated with io_base
- Provide missing export helpers
- Fix remap bulk read optimisation fallout
- Fix memory leak issues in error paths
-----BEGIN PGP SIGNATURE-----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=EBtX
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Drivers:
- Add support for Renesas RZ/G2L MTU3
New Device Support:
- Add support for Lenovo Yoga Book X90F to Intel CHT WC
- Add support for MAX5970 and MAX5978 to Simple MFD (I2C)
- Add support for Meteor Lake PCH-S LPSS PCI to Intel LPSS PCI
- Add support for AXP15060 PMIC to X-Powers PMIC collection
Remove Device Support:
- Remove support for Samsung 5M8751 and S5M8763 PMIC devices
New Functionality:
- Convert deprecated QCOM IRQ Chip to config registers
- Add support for 32-bit address spaces to Renesas SMUs
Fix-ups:
- Make use of APIs / MACROs designed to simplify and demystify
- Add / improve Device Tree bindings
- Memory saving struct layout optimisations
- Remove old / deprecated functionality
- Factor out unassigned register addresses from ranges
- Trivial: Spelling fixes, renames and coding style fixes
- Rid 'defined but not used' warnings
- Remove ineffective casts and pointer stubs
Bug Fixes:
- Fix incorrectly non-inverted mask/unmask IRQs on QCOM platforms
- Remove MODULE_*() helpers from non-tristate drivers
- Do not attempt to use out-of-range memory addresses associated with io_base
- Provide missing export helpers
- Fix remap bulk read optimisation fallout
- Fix memory leak issues in error paths"
* tag 'mfd-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (88 commits)
dt-bindings: mfd: ti,j721e-system-controller: Add SoC chip ID
leds: bd2606mvv: Driver for the Rohm 6 Channel i2c LED driver
dt-bindings: mfd: qcom,spmi-pmic: Document flash LED controller
dt-bindings: mfd: x-powers,axp152: Document the AXP15060 variant
mfd: axp20x: Add support for AXP15060 PMIC
dt-bindings: mfd: x-powers,axp152: Document the AXP313a variant
counter: rz-mtu3-cnt: Unlock on error in rz_mtu3_count_ceiling_write()
dt-bindings: mfd: dlg,da9063: Document voltage monitoring
dt-bindings: mfd: stm32: Remove unnecessary blank lines
dt-bindings: mfd: qcom,spmi-pmic: Use generic ADC node name in examples
dt-bindings: mfd: syscon: Add nuvoton,ma35d1-sys compatible
MAINTAINERS: Add entries for Renesas RZ/G2L MTU3a counter driver
counter: Add Renesas RZ/G2L MTU3a counter driver
Documentation: ABI: sysfs-bus-counter: add cascade_counts_enable and external_input_phase_clock_select
mfd: Add Renesas RZ/G2L MTU3a core driver
dt-bindings: timer: Document RZ/G2L MTU3a bindings
mfd: rsmu_i2c: Convert to i2c's .probe_new() again
mfd: intel-lpss: Add Intel Meteor Lake PCH-S LPSS PCI IDs
mfd: dln2: Fix memory leak in dln2_probe()
mfd: axp20x: Fix axp288 writable-ranges
...
|
||
|
Linus Torvalds
|
b6a7828502 |
modules-6.4-rc1
The summary of the changes for this pull requests is:
* Song Liu's new struct module_memory replacement
* Nick Alcock's MODULE_LICENSE() removal for non-modules
* My cleanups and enhancements to reduce the areas where we vmalloc
module memory for duplicates, and the respective debug code which
proves the remaining vmalloc pressure comes from userspace.
Most of the changes have been in linux-next for quite some time except
the minor fixes I made to check if a module was already loaded
prior to allocating the final module memory with vmalloc and the
respective debug code it introduces to help clarify the issue. Although
the functional change is small it is rather safe as it can only *help*
reduce vmalloc space for duplicates and is confirmed to fix a bootup
issue with over 400 CPUs with KASAN enabled. I don't expect stable
kernels to pick up that fix as the cleanups would have also had to have
been picked up. Folks on larger CPU systems with modules will want to
just upgrade if vmalloc space has been an issue on bootup.
Given the size of this request, here's some more elaborate details
on this pull request.
The functional change change in this pull request is the very first
patch from Song Liu which replaces the struct module_layout with a new
struct module memory. The old data structure tried to put together all
types of supported module memory types in one data structure, the new
one abstracts the differences in memory types in a module to allow each
one to provide their own set of details. This paves the way in the
future so we can deal with them in a cleaner way. If you look at changes
they also provide a nice cleanup of how we handle these different memory
areas in a module. This change has been in linux-next since before the
merge window opened for v6.3 so to provide more than a full kernel cycle
of testing. It's a good thing as quite a bit of fixes have been found
for it.
Jason Baron then made dynamic debug a first class citizen module user by
using module notifier callbacks to allocate / remove module specific
dynamic debug information.
Nick Alcock has done quite a bit of work cross-tree to remove module
license tags from things which cannot possibly be module at my request
so to:
a) help him with his longer term tooling goals which require a
deterministic evaluation if a piece a symbol code could ever be
part of a module or not. But quite recently it is has been made
clear that tooling is not the only one that would benefit.
Disambiguating symbols also helps efforts such as live patching,
kprobes and BPF, but for other reasons and R&D on this area
is active with no clear solution in sight.
b) help us inch closer to the now generally accepted long term goal
of automating all the MODULE_LICENSE() tags from SPDX license tags
In so far as a) is concerned, although module license tags are a no-op
for non-modules, tools which would want create a mapping of possible
modules can only rely on the module license tag after the commit
|
||
|
Linus Torvalds
|
556eb8b791 |
Driver core changes for 6.4-rc1
Here is the large set of driver core changes for 6.4-rc1. Once again, a busy development cycle, with lots of changes happening in the driver core in the quest to be able to move "struct bus" and "struct class" into read-only memory, a task now complete with these changes. This will make the future rust interactions with the driver core more "provably correct" as well as providing more obvious lifetime rules for all busses and classes in the kernel. The changes required for this did touch many individual classes and busses as many callbacks were changed to take const * parameters instead. All of these changes have been submitted to the various subsystem maintainers, giving them plenty of time to review, and most of them actually did so. Other than those changes, included in here are a small set of other things: - kobject logging improvements - cacheinfo improvements and updates - obligatory fw_devlink updates and fixes - documentation updates - device property cleanups and const * changes - firwmare loader dependency fixes. All of these have been in linux-next for a while with no reported problems. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZEp7Sw8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ykitQCfamUHpxGcKOAGuLXMotXNakTEsxgAoIquENm5 LEGadNS38k5fs+73UaxV =7K4B -----END PGP SIGNATURE----- Merge tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the large set of driver core changes for 6.4-rc1. Once again, a busy development cycle, with lots of changes happening in the driver core in the quest to be able to move "struct bus" and "struct class" into read-only memory, a task now complete with these changes. This will make the future rust interactions with the driver core more "provably correct" as well as providing more obvious lifetime rules for all busses and classes in the kernel. The changes required for this did touch many individual classes and busses as many callbacks were changed to take const * parameters instead. All of these changes have been submitted to the various subsystem maintainers, giving them plenty of time to review, and most of them actually did so. Other than those changes, included in here are a small set of other things: - kobject logging improvements - cacheinfo improvements and updates - obligatory fw_devlink updates and fixes - documentation updates - device property cleanups and const * changes - firwmare loader dependency fixes. All of these have been in linux-next for a while with no reported problems" * tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits) device property: make device_property functions take const device * driver core: update comments in device_rename() driver core: Don't require dynamic_debug for initcall_debug probe timing firmware_loader: rework crypto dependencies firmware_loader: Strip off \n from customized path zram: fix up permission for the hot_add sysfs file cacheinfo: Add use_arch[|_cache]_info field/function arch_topology: Remove early cacheinfo error message if -ENOENT cacheinfo: Check cache properties are present in DT cacheinfo: Check sib_leaf in cache_leaves_are_shared() cacheinfo: Allow early level detection when DT/ACPI info is missing/broken cacheinfo: Add arm64 early level initializer implementation cacheinfo: Add arch specific early level initializer tty: make tty_class a static const structure driver core: class: remove struct class_interface * from callbacks driver core: class: mark the struct class in struct class_interface constant driver core: class: make class_register() take a const * driver core: class: mark class_release() as taking a const * driver core: remove incorrect comment for device_create* MIPS: vpe-cmp: remove module owner pointer from struct class usage. ... |
||
|
Linus Torvalds
|
6e98b09da9 |
Networking changes for 6.4.
Core
----
- Introduce a config option to tweak MAX_SKB_FRAGS. Increasing the
default value allows for better BIG TCP performances.
- Reduce compound page head access for zero-copy data transfers.
- RPS/RFS improvements, avoiding unneeded NET_RX_SOFTIRQ when possible.
- Threaded NAPI improvements, adding defer skb free support and unneeded
softirq avoidance.
- Address dst_entry reference count scalability issues, via false
sharing avoidance and optimize refcount tracking.
- Add lockless accesses annotation to sk_err[_soft].
- Optimize again the skb struct layout.
- Extends the skb drop reasons to make it usable by multiple
subsystems.
- Better const qualifier awareness for socket casts.
BPF
---
- Add skb and XDP typed dynptrs which allow BPF programs for more
ergonomic and less brittle iteration through data and variable-sized
accesses.
- Add a new BPF netfilter program type and minimal support to hook
BPF programs to netfilter hooks such as prerouting or forward.
- Add more precise memory usage reporting for all BPF map types.
- Adds support for using {FOU,GUE} encap with an ipip device operating
in collect_md mode and add a set of BPF kfuncs for controlling encap
params.
- Allow BPF programs to detect at load time whether a particular kfunc
exists or not, and also add support for this in light skeleton.
- Bigger batch of BPF verifier improvements to prepare for upcoming BPF
open-coded iterators allowing for less restrictive looping capabilities.
- Rework RCU enforcement in the verifier, add kptr_rcu and enforce BPF
programs to NULL-check before passing such pointers into kfunc.
- Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and in
local storage maps.
- Enable RCU semantics for task BPF kptrs and allow referenced kptr
tasks to be stored in BPF maps.
- Add support for refcounted local kptrs to the verifier for allowing
shared ownership, useful for adding a node to both the BPF list and
rbtree.
- Add BPF verifier support for ST instructions in convert_ctx_access()
which will help new -mcpu=v4 clang flag to start emitting them.
- Add ARM32 USDT support to libbpf.
- Improve bpftool's visual program dump which produces the control
flow graph in a DOT format by adding C source inline annotations.
Protocols
---------
- IPv4: Allow adding to IPv4 address a 'protocol' tag. Such value
indicates the provenance of the IP address.
- IPv6: optimize route lookup, dropping unneeded R/W lock acquisition.
- Add the handshake upcall mechanism, allowing the user-space
to implement generic TLS handshake on kernel's behalf.
- Bridge: support per-{Port, VLAN} neighbor suppression, increasing
resilience to nodes failures.
- SCTP: add support for Fair Capacity and Weighted Fair Queueing
schedulers.
- MPTCP: delay first subflow allocation up to its first usage. This
will allow for later better LSM interaction.
- xfrm: Remove inner/outer modes from input/output path. These are
not needed anymore.
- WiFi:
- reduced neighbor report (RNR) handling for AP mode
- HW timestamping support
- support for randomized auth/deauth TA for PASN privacy
- per-link debugfs for multi-link
- TC offload support for mac80211 drivers
- mac80211 mesh fast-xmit and fast-rx support
- enable Wi-Fi 7 (EHT) mesh support
Netfilter
---------
- Add nf_tables 'brouting' support, to force a packet to be routed
instead of being bridged.
- Update bridge netfilter and ovs conntrack helpers to handle
IPv6 Jumbo packets properly, i.e. fetch the packet length
from hop-by-hop extension header. This is needed for BIT TCP
support.
- The iptables 32bit compat interface isn't compiled in by default
anymore.
- Move ip(6)tables builtin icmp matches to the udptcp one.
This has the advantage that icmp/icmpv6 match doesn't load the
iptables/ip6tables modules anymore when iptables-nft is used.
- Extended netlink error report for netdevice in flowtables and
netdev/chains. Allow for incrementally add/delete devices to netdev
basechain. Allow to create netdev chain without device.
Driver API
----------
- Remove redundant Device Control Error Reporting Enable, as PCI core
has already error reporting enabled at enumeration time.
- Move Multicast DB netlink handlers to core, allowing devices other
then bridge to use them.
- Allow the page_pool to directly recycle the pages from safely
localized NAPI.
- Implement lockless TX queue stop/wake combo macros, allowing for
further code de-duplication and sanitization.
- Add YNL support for user headers and struct attrs.
- Add partial YNL specification for devlink.
- Add partial YNL specification for ethtool.
- Add tc-mqprio and tc-taprio support for preemptible traffic classes.
- Add tx push buf len param to ethtool, specifies the maximum number
of bytes of a transmitted packet a driver can push directly to the
underlying device.
- Add basic LED support for switch/phy.
- Add NAPI documentation, stop relaying on external links.
- Convert dsa_master_ioctl() to netdev notifier. This is a preparatory
work to make the hardware timestamping layer selectable by user
space.
- Add transceiver support and improve the error messages for CAN-FD
controllers.
New hardware / drivers
----------------------
- Ethernet:
- AMD/Pensando core device support
- MediaTek MT7981 SoC
- MediaTek MT7988 SoC
- Broadcom BCM53134 embedded switch
- Texas Instruments CPSW9G ethernet switch
- Qualcomm EMAC3 DWMAC ethernet
- StarFive JH7110 SoC
- NXP CBTX ethernet PHY
- WiFi:
- Apple M1 Pro/Max devices
- RealTek rtl8710bu/rtl8188gu
- RealTek rtl8822bs, rtl8822cs and rtl8821cs SDIO chipset
- Bluetooth:
- Realtek RTL8821CS, RTL8851B, RTL8852BS
- Mediatek MT7663, MT7922
- NXP w8997
- Actions Semi ATS2851
- QTI WCN6855
- Marvell 88W8997
- Can:
- STMicroelectronics bxcan stm32f429
Drivers
-------
- Ethernet NICs:
- Intel (1G, icg):
- add tracking and reporting of QBV config errors.
- add support for configuring max SDU for each Tx queue.
- Intel (100G, ice):
- refactor mailbox overflow detection to support Scalable IOV
- GNSS interface optimization
- Intel (i40e):
- support XDP multi-buffer
- nVidia/Mellanox:
- add the support for linux bridge multicast offload
- enable TC offload for egress and engress MACVLAN over bond
- add support for VxLAN GBP encap/decap flows offload
- extend packet offload to fully support libreswan
- support tunnel mode in mlx5 IPsec packet offload
- extend XDP multi-buffer support
- support MACsec VLAN offload
- add support for dynamic msix vectors allocation
- drop RX page_cache and fully use page_pool
- implement thermal zone to report NIC temperature
- Netronome/Corigine:
- add support for multi-zone conntrack offload
- Solarflare/Xilinx:
- support offloading TC VLAN push/pop actions to the MAE
- support TC decap rules
- support unicast PTP
- Other NICs:
- Broadcom (bnxt): enforce software based freq adjustments only
on shared PHC NIC
- RealTek (r8169): refactor to addess ASPM issues during NAPI poll.
- Micrel (lan8841): add support for PTP_PF_PEROUT
- Cadence (macb): enable PTP unicast
- Engleder (tsnep): add XDP socket zero-copy support
- virtio-net: implement exact header length guest feature
- veth: add page_pool support for page recycling
- vxlan: add MDB data path support
- gve: add XDP support for GQI-QPL format
- geneve: accept every ethertype
- macvlan: allow some packets to bypass broadcast queue
- mana: add support for jumbo frame
- Ethernet high-speed switches:
- Microchip (sparx5): Add support for TC flower templates.
- Ethernet embedded switches:
- Broadcom (b54):
- configure 6318 and 63268 RGMII ports
- Marvell (mv88e6xxx):
- faster C45 bus scan
- Microchip:
- lan966x:
- add support for IS1 VCAP
- better TX/RX from/to CPU performances
- ksz9477: add ETS Qdisc support
- ksz8: enhance static MAC table operations and error handling
- sama7g5: add PTP capability
- NXP (ocelot):
- add support for external ports
- add support for preemptible traffic classes
- Texas Instruments:
- add CPSWxG SGMII support for J7200 and J721E
- Intel WiFi (iwlwifi):
- preparation for Wi-Fi 7 EHT and multi-link support
- EHT (Wi-Fi 7) sniffer support
- hardware timestamping support for some devices/firwmares
- TX beacon protection on newer hardware
- Qualcomm 802.11ax WiFi (ath11k):
- MU-MIMO parameters support
- ack signal support for management packets
- RealTek WiFi (rtw88):
- SDIO bus support
- better support for some SDIO devices
(e.g. MAC address from efuse)
- RealTek WiFi (rtw89):
- HW scan support for 8852b
- better support for 6 GHz scanning
- support for various newer firmware APIs
- framework firmware backwards compatibility
- MediaTek WiFi (mt76):
- P2P support
- mesh A-MSDU support
- EHT (Wi-Fi 7) support
- coredump support
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=ITVa
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core:
- Introduce a config option to tweak MAX_SKB_FRAGS. Increasing the
default value allows for better BIG TCP performances
- Reduce compound page head access for zero-copy data transfers
- RPS/RFS improvements, avoiding unneeded NET_RX_SOFTIRQ when
possible
- Threaded NAPI improvements, adding defer skb free support and
unneeded softirq avoidance
- Address dst_entry reference count scalability issues, via false
sharing avoidance and optimize refcount tracking
- Add lockless accesses annotation to sk_err[_soft]
- Optimize again the skb struct layout
- Extends the skb drop reasons to make it usable by multiple
subsystems
- Better const qualifier awareness for socket casts
BPF:
- Add skb and XDP typed dynptrs which allow BPF programs for more
ergonomic and less brittle iteration through data and
variable-sized accesses
- Add a new BPF netfilter program type and minimal support to hook
BPF programs to netfilter hooks such as prerouting or forward
- Add more precise memory usage reporting for all BPF map types
- Adds support for using {FOU,GUE} encap with an ipip device
operating in collect_md mode and add a set of BPF kfuncs for
controlling encap params
- Allow BPF programs to detect at load time whether a particular
kfunc exists or not, and also add support for this in light
skeleton
- Bigger batch of BPF verifier improvements to prepare for upcoming
BPF open-coded iterators allowing for less restrictive looping
capabilities
- Rework RCU enforcement in the verifier, add kptr_rcu and enforce
BPF programs to NULL-check before passing such pointers into kfunc
- Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and
in local storage maps
- Enable RCU semantics for task BPF kptrs and allow referenced kptr
tasks to be stored in BPF maps
- Add support for refcounted local kptrs to the verifier for allowing
shared ownership, useful for adding a node to both the BPF list and
rbtree
- Add BPF verifier support for ST instructions in
convert_ctx_access() which will help new -mcpu=v4 clang flag to
start emitting them
- Add ARM32 USDT support to libbpf
- Improve bpftool's visual program dump which produces the control
flow graph in a DOT format by adding C source inline annotations
Protocols:
- IPv4: Allow adding to IPv4 address a 'protocol' tag. Such value
indicates the provenance of the IP address
- IPv6: optimize route lookup, dropping unneeded R/W lock acquisition
- Add the handshake upcall mechanism, allowing the user-space to
implement generic TLS handshake on kernel's behalf
- Bridge: support per-{Port, VLAN} neighbor suppression, increasing
resilience to nodes failures
- SCTP: add support for Fair Capacity and Weighted Fair Queueing
schedulers
- MPTCP: delay first subflow allocation up to its first usage. This
will allow for later better LSM interaction
- xfrm: Remove inner/outer modes from input/output path. These are
not needed anymore
- WiFi:
- reduced neighbor report (RNR) handling for AP mode
- HW timestamping support
- support for randomized auth/deauth TA for PASN privacy
- per-link debugfs for multi-link
- TC offload support for mac80211 drivers
- mac80211 mesh fast-xmit and fast-rx support
- enable Wi-Fi 7 (EHT) mesh support
Netfilter:
- Add nf_tables 'brouting' support, to force a packet to be routed
instead of being bridged
- Update bridge netfilter and ovs conntrack helpers to handle IPv6
Jumbo packets properly, i.e. fetch the packet length from
hop-by-hop extension header. This is needed for BIT TCP support
- The iptables 32bit compat interface isn't compiled in by default
anymore
- Move ip(6)tables builtin icmp matches to the udptcp one. This has
the advantage that icmp/icmpv6 match doesn't load the
iptables/ip6tables modules anymore when iptables-nft is used
- Extended netlink error report for netdevice in flowtables and
netdev/chains. Allow for incrementally add/delete devices to netdev
basechain. Allow to create netdev chain without device
Driver API:
- Remove redundant Device Control Error Reporting Enable, as PCI core
has already error reporting enabled at enumeration time
- Move Multicast DB netlink handlers to core, allowing devices other
then bridge to use them
- Allow the page_pool to directly recycle the pages from safely
localized NAPI
- Implement lockless TX queue stop/wake combo macros, allowing for
further code de-duplication and sanitization
- Add YNL support for user headers and struct attrs
- Add partial YNL specification for devlink
- Add partial YNL specification for ethtool
- Add tc-mqprio and tc-taprio support for preemptible traffic classes
- Add tx push buf len param to ethtool, specifies the maximum number
of bytes of a transmitted packet a driver can push directly to the
underlying device
- Add basic LED support for switch/phy
- Add NAPI documentation, stop relaying on external links
- Convert dsa_master_ioctl() to netdev notifier. This is a
preparatory work to make the hardware timestamping layer selectable
by user space
- Add transceiver support and improve the error messages for CAN-FD
controllers
New hardware / drivers:
- Ethernet:
- AMD/Pensando core device support
- MediaTek MT7981 SoC
- MediaTek MT7988 SoC
- Broadcom BCM53134 embedded switch
- Texas Instruments CPSW9G ethernet switch
- Qualcomm EMAC3 DWMAC ethernet
- StarFive JH7110 SoC
- NXP CBTX ethernet PHY
- WiFi:
- Apple M1 Pro/Max devices
- RealTek rtl8710bu/rtl8188gu
- RealTek rtl8822bs, rtl8822cs and rtl8821cs SDIO chipset
- Bluetooth:
- Realtek RTL8821CS, RTL8851B, RTL8852BS
- Mediatek MT7663, MT7922
- NXP w8997
- Actions Semi ATS2851
- QTI WCN6855
- Marvell 88W8997
- Can:
- STMicroelectronics bxcan stm32f429
Drivers:
- Ethernet NICs:
- Intel (1G, icg):
- add tracking and reporting of QBV config errors
- add support for configuring max SDU for each Tx queue
- Intel (100G, ice):
- refactor mailbox overflow detection to support Scalable IOV
- GNSS interface optimization
- Intel (i40e):
- support XDP multi-buffer
- nVidia/Mellanox:
- add the support for linux bridge multicast offload
- enable TC offload for egress and engress MACVLAN over bond
- add support for VxLAN GBP encap/decap flows offload
- extend packet offload to fully support libreswan
- support tunnel mode in mlx5 IPsec packet offload
- extend XDP multi-buffer support
- support MACsec VLAN offload
- add support for dynamic msix vectors allocation
- drop RX page_cache and fully use page_pool
- implement thermal zone to report NIC temperature
- Netronome/Corigine:
- add support for multi-zone conntrack offload
- Solarflare/Xilinx:
- support offloading TC VLAN push/pop actions to the MAE
- support TC decap rules
- support unicast PTP
- Other NICs:
- Broadcom (bnxt): enforce software based freq adjustments only on
shared PHC NIC
- RealTek (r8169): refactor to addess ASPM issues during NAPI poll
- Micrel (lan8841): add support for PTP_PF_PEROUT
- Cadence (macb): enable PTP unicast
- Engleder (tsnep): add XDP socket zero-copy support
- virtio-net: implement exact header length guest feature
- veth: add page_pool support for page recycling
- vxlan: add MDB data path support
- gve: add XDP support for GQI-QPL format
- geneve: accept every ethertype
- macvlan: allow some packets to bypass broadcast queue
- mana: add support for jumbo frame
- Ethernet high-speed switches:
- Microchip (sparx5): Add support for TC flower templates
- Ethernet embedded switches:
- Broadcom (b54):
- configure 6318 and 63268 RGMII ports
- Marvell (mv88e6xxx):
- faster C45 bus scan
- Microchip:
- lan966x:
- add support for IS1 VCAP
- better TX/RX from/to CPU performances
- ksz9477: add ETS Qdisc support
- ksz8: enhance static MAC table operations and error handling
- sama7g5: add PTP capability
- NXP (ocelot):
- add support for external ports
- add support for preemptible traffic classes
- Texas Instruments:
- add CPSWxG SGMII support for J7200 and J721E
- Intel WiFi (iwlwifi):
- preparation for Wi-Fi 7 EHT and multi-link support
- EHT (Wi-Fi 7) sniffer support
- hardware timestamping support for some devices/firwmares
- TX beacon protection on newer hardware
- Qualcomm 802.11ax WiFi (ath11k):
- MU-MIMO parameters support
- ack signal support for management packets
- RealTek WiFi (rtw88):
- SDIO bus support
- better support for some SDIO devices (e.g. MAC address from
efuse)
- RealTek WiFi (rtw89):
- HW scan support for 8852b
- better support for 6 GHz scanning
- support for various newer firmware APIs
- framework firmware backwards compatibility
- MediaTek WiFi (mt76):
- P2P support
- mesh A-MSDU support
- EHT (Wi-Fi 7) support
- coredump support"
* tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2078 commits)
net: phy: hide the PHYLIB_LEDS knob
net: phy: marvell-88x2222: remove unnecessary (void*) conversions
tcp/udp: Fix memleaks of sk and zerocopy skbs with TX timestamp.
net: amd: Fix link leak when verifying config failed
net: phy: marvell: Fix inconsistent indenting in led_blink_set
lan966x: Don't use xdp_frame when action is XDP_TX
tsnep: Add XDP socket zero-copy TX support
tsnep: Add XDP socket zero-copy RX support
tsnep: Move skb receive action to separate function
tsnep: Add functions for queue enable/disable
tsnep: Rework TX/RX queue initialization
tsnep: Replace modulo operation with mask
net: phy: dp83867: Add led_brightness_set support
net: phy: Fix reading LED reg property
drivers: nfc: nfcsim: remove return value check of `dev_dir`
net: phy: dp83867: Remove unnecessary (void*) conversions
net: ethtool: coalesce: try to make user settings stick twice
net: mana: Check if netdev/napi_alloc_frag returns single page
net: mana: Rename mana_refill_rxoob and remove some empty lines
net: veth: add page_pool stats
...
|
||
Shengyu Qu
|
e0f8ad2a70 |
mfd: axp20x: Add support for AXP15060 PMIC
The AXP15060 is a PMIC chip produced by X-Powers, and could be connected via an I2C bus. Describe the regmap and the MFD bits, along with the registers exposed via I2C. Eventually advertise the device using a new compatible string and add support for power off the system. The driver would disable PEK function if IRQ is not configured in device tree, since some boards (For example, Starfive Visionfive 2) didn't connect IRQ line of PMIC to SOC. GPIO function isn't enabled in this commit, since its configuration operation is different from any existing AXP PMICs and needs logic modification on existing driver. GPIO support might come in later patches. Signed-off-by: Shengyu Qu <wiagn233@outlook.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/TY3P286MB261162D57695AC8164ED50E298609@TY3P286MB2611.JPNP286.PROD.OUTLOOK.COM |