Commit Graph

218 Commits

Author SHA1 Message Date
Russell King
950bc137c3 drm/armada: implement primary plane update
Implement primary plane update without having to go through a modeset
to achieve that; the hardware does not require such complexity.  This
means we treat the primary plane as any other, allowing the format,
size, position and scaling to be updated via the normal plane ioctls.

This also allows us to seemlessly disable and re-enable the primary
plane when (eg) displaying full-frame video without any graphic
clipping the overlaid video - which saves wasting memory bandwidth
needlessly verifying that the colorkey is indeed filling the entire
primary plane.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-12-08 12:22:01 +00:00
Russell King
11df53dc5b drm/armada: extract register generation from armada_drm_primary_set()
Extract the register generation from armada_drm_primary_set(), so that
it can be re-used.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-12-08 12:21:59 +00:00
Russell King
07da3c787a drm/armada: wait for previous work when moving overlay window
We must wait for the previous plane work to complete before moving
the overlay window, as it could overwrite our positioning update.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-12-08 12:21:57 +00:00
Russell King
65843e9af7 drm/armada: move overlay plane register update generation
Move the overlay plane register update generation to a separate function
as this is independent of the legacy or atomic update.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-12-08 12:21:53 +00:00
Russell King
d19f6ee505 drm/armada: re-organise overlay register update generation
Re-organise overlay register generation so that we do not have to wait
for the previous update to complete while creating the new state.  This
allows the update to be fully prepared before queueing it for the next
interrupt.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-12-08 12:20:57 +00:00
Russell King
890ca8df5a drm/armada: disable planes at next blanking period
Disable planes at the next blanking period rather than immediately.
In order to achieve this, we need to delay the clearing of dcrtc->plane
until after the next blanking period, so move that into a separate
work function.  To avoid races, we also need to move its assignment in
the overlay code.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-12-08 12:20:52 +00:00
Russell King
d924155dae drm/armada: avoid work allocation
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-12-08 12:20:00 +00:00
Russell King
c93dfdcd05 drm/armada: allow armada_drm_plane_work_queue() to silently fail
Avoid printing an error message when armada_drm_plane_work_queue() is
unable to get the vblank (eg, because we're doing a modeset.)  Continue
to report the failure to the caller, so the caller can handle this.

Move the error message into armada_ovl_plane_update().

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-12-08 12:19:58 +00:00
Russell King
7bfab1ec45 drm/armada: use drm_plane_helper_check_state()
Use drm_plane_helper_check_state() to check the overlay plane state
rather than drm_plane_helper_check_update(), as:

(1) using drm_plane_helper_check_state() provides a better migration
    path to atomic modeset
(2) it avoids needless copies of drm rectangle structures, and so is
    more efficient.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-12-08 12:19:56 +00:00
Russell King
73c51abd9d drm/armada: only enable HSMOOTH if scaling horizontally
Only enable the HSMOOTH control bit if we are scaling horizontally,
otherwise it makes no sense to enable the horizontal scaler.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-12-08 12:19:55 +00:00
Russell King
214612f9b7 drm/armada: move writes of LCD_SPU_SRAM_PARA1 under lock
Move writes of LCD_SPU_SRAM_PARA1 under the irq lock, so that we can
add this to the frame updates at interrupt time when disabling a
plane.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-12-08 12:19:53 +00:00
Russell King
eaa66279c3 drm/armada: move regs into armada_plane_work
Move the register update structure out of the overlay private structure
into armada_plane_work, as this is common to both the primary and
overlay planes.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-12-08 12:19:51 +00:00
Russell King
eb19be5bbe drm/armada: move event sending into armada_plane_work
Move the sending of events into the armada_plane_work structure, and
combine the processing in armada_drm_plane_work_call().

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-12-08 12:19:49 +00:00
Russell King
b972a80f44 drm/armada: move fb retirement into armada_plane_work
Both the primary and overlay planes retire framebuffers in a similar
manner; this can be consolidated by moving the retirement up to the
armada_plane_work layer.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-12-08 12:19:44 +00:00
Russell King
a3f6a18f9a drm/armada: move overlay plane work out from under spinlock
Move the overlay plane work out from under the spinlock so that both the
primary and overlay planes run their work in the same context.  This is
necessary so that we can use frame works with the overlay plane.

However, we must update the CRTC registers under the spinlock, so fix up
the overlay code for that.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-12-08 12:18:46 +00:00
Russell King
d76dcc7236 drm/armada: clear plane enable bit when disabling
Clear the plane enable bit in the software state within
armada_drm_plane_disable() when disabling either the primary or
overlay planes.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-12-08 12:18:44 +00:00
Russell King
f1f1bffcf0 drm/armada: clean up armada_drm_crtc_plane_disable()
Merge armada_drm_primary_disable() into armada_drm_crtc_plane_disable()
and rename to armada_drm_plane_disable().  Use this to simplify
armada_ovl_plane_disable().

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-12-08 12:18:43 +00:00
Russell King
28b3043399 drm/armada: allow the primary plane to be disabled
Add our own hook to allow the primary plane to be disabled.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2017-12-08 12:18:35 +00:00
Russell King
65724a1943 drm/armada: wait and cancel any pending frame work at disable
Wait for a second, and if we time out, cancel any pending work when
disabling the primary plane.  This ensures that any pending work is
completed or cleaned up prior to the disable taking effect.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-12-08 12:17:24 +00:00
Russell King
2839d45c7d drm/armada: add work cancel callback
Add a work cancel callback, so that work items can add functionality to
clean themselves up when they are cancelled.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-12-08 12:17:23 +00:00
Russell King
eaab013075 drm/armada: store plane in armada_plane_work
Store the plane in the armada_plane_work structure rather than passing
it around; it doesn't get used very much in the work structures, so
passing it around is a needless expense.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-12-08 12:17:21 +00:00
Russell King
901bb88991 drm/armada: add a common frame work allocator
Add and use a common frame work allocator, initialising the frame work
to a sane state.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-12-08 12:17:19 +00:00
Russell King
d3b8421543 drm/armada: remove armada_drm_plane_work_cancel() return value
armada_drm_plane_work_cancel()'s returned work structure is never used
or referenced, so it's pointless returning it.  It's also pointless
because the caller doesn't have a clue what kind of work structure it
is.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-12-08 12:17:17 +00:00
Russell King
de0ea9ad2f drm/armada: fix YUV planar format framebuffer offsets
We weren't correctly calculating the YUV planar offsets for subsampled
chroma planes correctly - fix up the coordinates for planes 1 and 2.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-12-08 12:16:22 +00:00
Russell King
d6a48965db drm/armada: improve efficiency of armada_drm_plane_calc_addrs()
Lookup the drm_format_info structure once when computing all the
framebuffer plane addresses by using drm_format_info(), rather than
repetitive lookups via drm_format_plane_cpp().

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-12-08 12:16:22 +00:00
Russell King
9c898c4954 drm/armada: fix UV swap code
The UV swap code was not always programming things correctly when
the source origin box has been offset.  Fix this.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-12-08 12:16:22 +00:00
Russell King
2bf57436d5 drm/armada: fix SRAM powerdown
Avoid powering down the overlay SRAM banks when disabling the primary
plane, thereby masking any overlay video.  This feature is supposed to
allow us to cut the bandwidth required while displaying full-frame
overlay video.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-12-08 12:16:22 +00:00
Russell King
33cd3c07a9 drm/armada: fix leak of crtc structure
Fix the leak of the CRTC structure in the failure paths of
armada_drm_crtc_create().

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-12-08 12:16:22 +00:00
Linus Torvalds
e60e1ee606 main drm pull request for v4.15
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJaCm8RAAoJEAx081l5xIa+zX0QAJSm31kCG3vdw2CNiRx25L3q
 3hcsEOgAjVJ9FQVGKFWjzb8TK35tSqtNx5kWIj0VGaIfBE5Bdg5SLLgKKUYas8rY
 4LaphqICq2uxu2BNa2tpiar/sHhAnuozwQ4czpVWXzlaISnb9yYzRl7gMuyUVGkx
 +Gih5VUhLmQC0HsRTLJ3vaZQoUsLAl2gAjKcWa1bx57j2S+iKOPfsLaq7VYo+y1I
 Njc+iSGqMhJzRLXVkxL2lQKaslp7R38Bbh5K4Kvyjkm4Aq7zErOF6irpOXKMcrGl
 mwnr89vf1G9thjikrBaXpKnuvdbWYveoN/ORMlTdCfxkFnChHLnm3bd7NJ49RXDN
 Hv/Iq9YYjmZ9GTatxnx7lWtmXnZXC5he1yn1JAuz/yt7/0b/Wx+Mu/wEpBXYNFTd
 1AZdD586i+AmPo3yDkqH9nBu8JC0W0AnS9VZma4LVvZOP2UfJmj5Im1CLHItbGDN
 FnUCkwyD/lJUUk+WgT+w/GOMJgmFHDiFFl4tFtYVVjrUirpCFVguSKG9xuv6tT8P
 8iRsoP7RrcmDN9ojN2SEHwcpsAv3HnKkDv+9+GIbWnrGsSbCPq8Qm+JDSvf4h22I
 K5lwNpJrcpSKI+q10L7w2xliTBwb98sJkWGA/rssomrdBOWteGZAyqFRYAVgQ+mJ
 x/nJurIqQYh2KQN9+uLG
 =xVV2
 -----END PGP SIGNATURE-----

Merge tag 'drm-for-v4.15' of git://people.freedesktop.org/~airlied/linux

Pull drm updates from Dave Airlie:
 "This is the main drm pull request for v4.15.

  Core:
   - Atomic object lifetime fixes
   - Atomic iterator improvements
   - Sparse/smatch fixes
   - Legacy kms ioctls to be interruptible
   - EDID override improvements
   - fb/gem helper cleanups
   - Simple outreachy patches
   - Documentation improvements
   - Fix dma-buf rcu races
   - DRM mode object leasing for improving VR use cases.
   - vgaarb improvements for non-x86 platforms.

  New driver:
   - tve200: Faraday Technology TVE200 block.

     This "TV Encoder" encodes a ITU-T BT.656 stream and can be found in
     the StorLink SL3516 (later Cortina Systems CS3516) as well as the
     Grain Media GM8180.

  New bridges:
   - SiI9234 support

  New panels:
   - S6E63J0X03, OTM8009A, Seiko 43WVF1G, 7" rpi touch panel, Toshiba
     LT089AC19000, Innolux AT043TN24

  i915:
   - Remove Coffeelake from alpha support
   - Cannonlake workarounds
   - Infoframe refactoring for DisplayPort
   - VBT updates
   - DisplayPort vswing/emph/buffer translation refactoring
   - CCS fixes
   - Restore GPU clock boost on missed vblanks
   - Scatter list updates for userptr allocations
   - Gen9+ transition watermarks
   - Display IPC (Isochronous Priority Control)
   - Private PAT management
   - GVT: improved error handling and pci config sanitizing
   - Execlist refactoring
   - Transparent Huge Page support
   - User defined priorities support
   - HuC/GuC firmware refactoring
   - DP MST fixes
   - eDP power sequencing fixes
   - Use RCU instead of stop_machine
   - PSR state tracking support
   - Eviction fixes
   - BDW DP aux channel timeout fixes
   - LSPCON fixes
   - Cannonlake PLL fixes

  amdgpu:
   - Per VM BO support
   - Powerplay cleanups
   - CI powerplay support
   - PASID mgr for kfd
   - SR-IOV fixes
   - initial GPU reset for vega10
   - Prime mmap support
   - TTM updates
   - Clock query interface for Raven
   - Fence to handle ioctl
   - UVD encode ring support on Polaris
   - Transparent huge page DMA support
   - Compute LRU pipe tweaks
   - BO flag to allow buffers to opt out of implicit sync
   - CTX priority setting API
   - VRAM lost infrastructure plumbing

  qxl:
   - fix flicker since atomic rework

  amdkfd:
   - Further improvements from internal AMD tree
   - Usermode events
   - Drop radeon support

  nouveau:
   - Pascal temperature sensor support
   - Improved BAR2 handling
   - MMU rework to support Pascal MMU

  exynos:
   - Improved HDMI/mixer support
   - HDMI audio interface support

  tegra:
   - Prep work for tegra186
   - Cleanup/fixes

  msm:
   - Preemption support for a5xx
   - Display fixes for 8x96 (snapdragon 820)
   - Async cursor plane fixes
   - FW loading rework
   - GPU debugging improvements

  vc4:
   - Prep for DSI panels
   - fix T-format tiling scanout
   - New madvise ioctl

  Rockchip:
   - LVDS support

  omapdrm:
   - omap4 HDMI CEC support

  etnaviv:
   - GPU performance counters groundwork

  sun4i:
   - refactor driver load + TCON backend
   - HDMI improvements
   - A31 support
   - Misc fixes

  udl:
   - Probe/EDID read fixes.

  tilcdc:
   - Misc fixes.

  pl111:
   - Support more variants

  adv7511:
   - Improve EDID handling.
   - HDMI CEC support

  sii8620:
   - Add remote control support"

* tag 'drm-for-v4.15' of git://people.freedesktop.org/~airlied/linux: (1480 commits)
  drm/rockchip: analogix_dp: Use mutex rather than spinlock
  drm/mode_object: fix documentation for object lookups.
  drm/i915: Reorder context-close to avoid calling i915_vma_close() under RCU
  drm/i915: Move init_clock_gating() back to where it was
  drm/i915: Prune the reservation shared fence array
  drm/i915: Idle the GPU before shinking everything
  drm/i915: Lock llist_del_first() vs llist_del_all()
  drm/i915: Calculate ironlake intermediate watermarks correctly, v2.
  drm/i915: Disable lazy PPGTT page table optimization for vGPU
  drm/i915/execlists: Remove the priority "optimisation"
  drm/i915: Filter out spurious execlists context-switch interrupts
  drm/amdgpu: use irq-safe lock for kiq->ring_lock
  drm/amdgpu: bypass lru touch for KIQ ring submission
  drm/amdgpu: Potential uninitialized variable in amdgpu_vm_update_directories()
  drm/amdgpu: potential uninitialized variable in amdgpu_vce_ring_parse_cs()
  drm/amd/powerplay: initialize a variable before using it
  drm/amd/powerplay: suppress KASAN out of bounds warning in vega10_populate_all_memory_levels
  drm/amd/amdgpu: fix evicted VRAM bo adjudgement condition
  drm/vblank: Tune drm_crtc_accurate_vblank_count() WARN down to a debug
  drm/rockchip: add CONFIG_OF dependency for lvds
  ...
2017-11-15 20:42:10 -08:00
Greg Kroah-Hartman
b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Haneen Mohammed
a52ff2a509 drm/armada: Replace drm_framebuffer_reference/unreference() with _get/put()
This patch replace instances of drm_framebuffer_reference/unreference with
*_get/put() suffixes, because get/put is shorter and consistent with the
kernel use of *_get/put suffixes.
This was done with the following Coccinelle script:

@r1@
expression e;
@@

(
-drm_framebuffer_reference(e);
+drm_framebuffer_get(e);
|
-drm_framebuffer_unreference(e);
+drm_framebuffer_put(e);
)

Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/e1df1b3375faa819029559b11c32e10501c5c5d6.1505932812.git.hamohammed.sa@gmail.com
2017-10-16 15:02:44 -04:00
Haneen Mohammed
4c3cf375bc drm/armada: Replace drm_gem_object_reference/unreference() with _get/put()
This patch replace instances of drm_gem_object_reference/unreference with
*_get/put() suffixes, because get/put is shorter and consistent with the
kernel use of *_get/put() suffixes.
This was done with the following Coccinelle script:

@r1@
expression e;
@@

(
-drm_gem_object_reference(e);
+drm_gem_object_get(e);
|
-drm_gem_object_unreference(e);
+drm_gem_object_put(e);
|
-drm_gem_object_unreference_unlocked(e);
+drm_gem_object_put_unlocked(e);
)

Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
[resolved small conflict with removed armada_gem_dumb_map_offset]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/a59ef1ed109ade897bcffcb01b33214262db8942.1505932812.git.hamohammed.sa@gmail.com
2017-10-16 15:01:51 -04:00
Haneen Mohammed
a33d7f8c06 drm/armada: Remove unused #include <drmP.h>
Remove drmP.h as it is not needed anymore since nothing it
defines is used in these files.

Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170927073846.GA14352@Haneen
2017-09-29 09:35:36 +02:00
Thierry Reding
f23ef8eda4 drm/armada: Use correct path to trace include
The header comment in include/trace/define_trace.h specifies that the
TRACE_INCLUDE_PATH needs to be relative to the define_trace.h header
rather than the trace file including it. Most instances get that wrong
and work around it by adding the $(src) directory to the include path.

While this works, it is preferable to refer to the correct path to the
trace file in the first place and avoid any workaround.

Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170901144954.19620-3-thierry.reding@gmail.com
2017-09-05 11:11:20 +02:00
Noralf Trønnes
4ee73624e0 drm/armada: Use .dumb_map_offset and .dumb_destroy defaults
This driver can use the drm_driver.dumb_destroy and
drm_driver.dumb_map_offset defaults, so no need to set them.

Cc: Russell King <linux@armlinux.org.uk>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1502986891-36764-3-git-send-email-noralf@tronnes.org
2017-09-02 14:22:20 +02:00
Peter Rosin
3bec23b2c2 drm: armada: remove dead empty functions
The redundant fb helpers .gamma_set and .gamma_get are no longer used.
Remove the dead code.

Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170713162538.22788-6-peda@axentia.se
2017-08-04 11:35:34 +02:00
Ben Widawsky
e6fc3b6855 drm: Plumb modifiers through plane init
This is the plumbing for supporting fb modifiers on planes. Modifiers
have already been introduced to some extent, but this series will extend
this to allow querying modifiers per plane. Based on this, the client to
enable optimal modifications for framebuffers.

This patch simply allows the DRM drivers to initialize their list of
supported modifiers upon initializing the plane.

v2: A minor addition from Daniel

v3:
* Updated commit message
* s/INVALID/DRM_FORMAT_MOD_INVALID (Liviu)
* Remove some excess newlines (Liviu)
* Update comment for > 64 modifiers (Liviu)

v4: Minor comment adjustments (Liviu)

v5: Some new platforms added due to rebase

v6: Add some missed plane inits (or maybe they're new - who knows at
this point) (Daniel)

Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Daniel Stone <daniels@collabora.com> (v2)
Reviewed-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Daniel Stone <daniels@collabora.com>
2017-08-01 17:50:06 +01:00
Rob Herring
4bf99144d2 drm: Convert to using %pOF instead of full_name
Now that we have a custom printf format specifier, convert users of
full_name to use %pOF instead. This is preparation to remove storing
of the full path string for each node.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Javier Martinez Canillas <javier@osg.samsung.com>
Cc: Xinliang Liu <z.liuxinliang@hisilicon.com>
Cc: Rongrong Zou <zourongrong@gmail.com>
Cc: Xinwei Kong <kong.kongxinwei@hisilicon.com>
Cc: Chen Feng <puck.chen@hisilicon.com>
Cc: CK Hu <ck.hu@mediatek.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Carlo Caione <carlo@caione.org>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Mark Yao <mark.yao@rock-chips.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Jyri Sarha <jsarha@ti.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-amlogic@lists.infradead.org
Cc: linux-renesas-soc@vger.kernel.org
Cc: linux-rockchip@lists.infradead.org
Partially-Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
[seanpaul changed subject prefix and fixed conflict in stm/ltdc.c]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2017-07-26 13:45:06 +02:00
Daniel Vetter
af05559854 Merge airlied/drm-next into drm-misc-next
I need this to be able to apply the deferred fbdev setup patches, I
need the relevant prep work that landed through the drm-intel tree.

Also squash in conflict fixup from Laurent Pinchart.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2017-07-26 13:43:33 +02:00
Daniel Vetter
e1923ab3d0 drm/<drivers>: Drop fbdev info flags
- FBINFO_CAN_FORCE_OUTPUT has been a lie ever since we nerfed&removed
  the entire panic handling code in our fbdev emulation. We might
  restore kms panic output, but not through the bazillion of legacy
  code layers called fbdev/fbcon, there's just no way to make that
  work safely.

- With the module check change FBINFO_DEFAULT is always 0, so can be
  removed too.

That removes another change to cargo-cult stuff in kms drivers, yay!

Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170706125735.28299-5-daniel.vetter@ffwll.ch
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2017-07-26 13:22:40 +02:00
Linus Torvalds
af3c8d9850 main drm pull for v4.13
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJZYseIAAoJEAx081l5xIa+85kP/0zKzKKVzZXSXG2TAGb5jNfk
 Ex+TELG8tWk9KBxA7lEE5c0WEsnP79cNoXZLQu8wlUzO8+kwQK5Bz0zgNUkpSuo1
 RthwdsxBQX1++UxB+HoSG+dOa7hkKVqlgQR3z9qyhsBXzetkJV0DoYcpMV0A1EWd
 6Jzt+AvCShVkcW+21LqHPlc5EIVewrDMoA3oU6aYCLhyAOUTVvvQB2ML8YApH7TM
 JrSrzCFHTrQEBbGUrZQhzR0sZzZzk9byntb/I/mdVbHeCyIHiL8sC4PfWSOyyazm
 GkPnA8G3aFAY9haBRz9jG/VBr1yVb0mCBjkWQ1lGfIAOCDDSc+d7PDXdG+i4AewK
 jZheXlrDIdGgmJLy4W3rdEqJvdf7UQHZOs8594OL19l4+FxCTrol1JSHSMeavCvr
 8bUNil9Jb/ONU/wmp+q55U0k4TCTyerUA7gKnuaJAwBvd4n78/PKmQnbrWinDyJc
 GQXp6zESk9bKt5DXSnVZuVf4POTzpuAsQkkfX1V2y145EHTQYfS3jLENWqEjyZUy
 QtKCHZvRkJfGaFU4Pr+vBo9Iu1GlA5OiOv08QadldTT4OxUI0T6yaLDobHCQfKPE
 sc3wCuCM+/dAnqoKDcGC4hAmF8zDdO0kw65P2m7uC6T9Jm1G35CioKbzo+fzUhuL
 fg5TBpbp2Wwe2oPA5iBm
 =2S5N
 -----END PGP SIGNATURE-----

Merge tag 'drm-for-v4.13' of git://people.freedesktop.org/~airlied/linux

Pull drm updates from Dave Airlie:
 "This is the main pull request for the drm, I think I've got one later
  driver pull for mediatek SoC driver, I'm undecided on if it needs to
  go to you yet.

  Otherwise summary below:

  Core drm:
   - Atomic add driver private objects
   - Deprecate preclose hook in modern drivers
   - MST bandwidth tracking
   - Use kvmalloc in more places
   - Add mode_valid hook for crtc/encoder/bridge
   - Reduce sync_file construction time
   - Documentation updates
   - New DRM synchronisation object support

  New drivers:
   - pl111 - pl111 CLCD display controller

  Panel:
   - Innolux P079ZCA panel driver
   - Add NL12880B20-05, NL192108AC18-02D, P320HVN03 panels
   - panel-samsung-s6e3ha2: Add s6e3hf2 panel support

  i915:
   - SKL+ watermark fixes
   - G4x/G33 reset improvements
   - DP AUX backlight improvements
   - Buffer based GuC/host communication
   - New getparam for (sub)slice infomation
   - Cannonlake and Coffeelake initial patches
   - Execbuf optimisations

  radeon/amdgpu:
   - Lots of Vega10 bug fixes
   - Preliminary raven support
   - KIQ support for compute rings
   - MEC queue management rework
   - DCE6 Audio support
   - SR-IOV improvements
   - Better radeon/amdgpu selection support

  nouveau:
   - HDMI stereoscopic support
   - Display code rework for >= GM20x GPUs

  msm:
   - GEM rework for fine-grained locking
   - Per-process pagetable work
   - HDMI fixes for Snapdragon 820.

  vc4:
   - Remove 256MB CMA limit from vc4
   - Add out-fence support
   - Add support for cygnus
   - Get/set tiling ioctls support
   - Add T-format tiling support for scanout

  zte:
   - add VGA support.

  etnaviv:
   - Thermal throttle support for newer GPUs
   - Restore userspace buffer cache performance
   - dma-buf sync fix

  stm:
   - add stm32f429 display support

  exynos:
   - Rework vblank handling
   - Fixup sw-trigger code

  sun4i:
   - V3s display engine support
   - HDMI support for older SoCs
   - Preliminary work on dual-pipeline SoCs.

  rcar-du:
   - VSP work

  imx-drm:
   - Remove counter load enable from PRE
   - Double read/write reduction flag support

  tegra:
   - Documentation for the host1x and drm driver.
   - Lots of staging ioctl fixes due to grate project work.

  omapdrm:
   - dma-buf fence support
   - TILER rotation fixes"

* tag 'drm-for-v4.13' of git://people.freedesktop.org/~airlied/linux: (1270 commits)
  drm: Remove unused drm_file parameter to drm_syncobj_replace_fence()
  drm/amd/powerplay: fix bug fail to remove sysfs when rmmod amdgpu.
  amdgpu: Set cik/si_support to 1 by default if radeon isn't built
  drm/amdgpu/gfx9: fix driver reload with KIQ
  drm/amdgpu/gfx8: fix driver reload with KIQ
  drm/amdgpu: Don't call amd_powerplay_destroy() if we don't have powerplay
  drm/ttm: Fix use-after-free in ttm_bo_clean_mm
  drm/amd/amdgpu: move get memory type function from early init to sw init
  drm/amdgpu/cgs: always set reference clock in mode_info
  drm/amdgpu: fix vblank_time when displays are off
  drm/amd/powerplay: power value format change for Vega10
  drm/amdgpu/gfx9: support the amdgpu.disable_cu option
  drm/amd/powerplay: change PPSMC_MSG_GetCurrPkgPwr for Vega10
  drm/amdgpu: Make amdgpu_cs_parser_init static (v2)
  drm/amdgpu/cs: fix a typo in a comment
  drm/amdgpu: Fix the exported always on CU bitmap
  drm/amdgpu/gfx9: gfx_v9_0_enable_gfx_static_mg_power_gating() can be static
  drm/amdgpu/psp: upper_32_bits/lower_32_bits for address setup
  drm/amd/powerplay/cz: print message if smc message fails
  drm/amdgpu: fix typo in amdgpu_debugfs_test_ib_init
  ...
2017-07-09 18:48:37 -07:00
Arvind Yadav
8a63ca58f8 drm: armada: Constify drm_prop_enum_list structures.
drm_prop_enum_lists are not supposed to change at runtime. All functions
working with drm_prop_enum_list provided by <drm/drm_property.h> work
with
const drm_prop_enum_list. So mark the non-const structs as const.

File size before:
   text	   data	    bss	    dec	    hex	filename
   3594	    176	      0	   3770	    eba drivers/gpu/drm/armada/armada_overlay.o

File size After adding 'const':
   text	   data	    bss	    dec	    hex	filename
   3722	     48	      0	   3770	    eba drivers/gpu/drm/armada/armada_overlay.o

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/dbeb176765bda8eaa9efdaa2dcd14c7bbae39cfa.1498905467.git.arvind.yadav.cs@gmail.com
2017-07-03 10:07:43 +02:00
Arvind Yadav
aaaf2f1299 drm: armada: constify drm_prop_enum_list structures.
drm_prop_enum_lists are not supposed to change at runtime. All functions
working with drm_prop_enum_list provided by <drm/drm_property.h> work
with
const drm_prop_enum_list. So mark the non-const structs as const.

File size before:
   text	   data	    bss	    dec	    hex	filename
   9629	    744	      0	  10373	   2885 drivers/gpu/drm/armada/armada_crtc.o

File size After adding 'const':
   text	   data	    bss	    dec	    hex	filename
   9757	    616	      0	  10373	   2885 drivers/gpu/drm/armada/armada_crtc.o

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/d2344c4dc40238cfe48fa6d917767df0f053150a.1498902844.git.arvind.yadav.cs@gmail.com
2017-07-03 10:07:38 +02:00
Arvind Yadav
8590971662 drm: armada: make of_device_ids const.
of_device_ids are not supposed to change at runtime. All functions
working with of_device_ids provided by <linux/of.h> work with const
of_device_ids. So mark the non-const structs as const.

File size before:
   text	   data	    bss	    dec	    hex	filename
   8836	    744	      0	   9580	   256c	drivers/gpu/drm/armada/armada_crtc.o

File size after constify armada_lcd_of_match:
   text	   data	    bss	    dec	    hex	filename
   9220	    328	      0	   9548	   254c	drivers/gpu/drm/armada/armada_crtc.o

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/ff9a9a908cf347775ab62cfadfde986de72dcf13.1497935382.git.arvind.yadav.cs@gmail.com
2017-06-21 09:06:44 +02:00
Christoph Hellwig
b400585720 drm/armada: don't abuse DMA_ERROR_CODE
dev_addr isn't even a dma_addr_t, and DMA_ERROR_CODE has never been
a valid driver API.  Add a bool mapped flag instead.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-06-20 11:12:58 +02:00
Robert Foss
c2c446ad29 drm: Add DRM_MODE_ROTATE_ and DRM_MODE_REFLECT_ to UAPI
Add DRM_MODE_ROTATE_ and DRM_MODE_REFLECT_ defines to the UAPI
as a convenience.

Ideally the DRM_ROTATE_ and DRM_REFLECT_ property ids are looked up
through the atomic API, but realizing that userspace is likely to take
shortcuts and assume that the enum values are what is sent over the
wire.

As a result these defines are provided purely as a convenience to
userspace applications.

Changes since v3:
 - Switched away from past tense in comments
 - Add define name change to previously mis-spelled DRM_REFLECT_X comment
 - Improved the comment for the DRM_MODE_REFLECT_<axis> comment

Changes since v2:
 - Changed define prefix from DRM_MODE_PROP_ to DRM_MODE_
 - Fix compilation errors
 - Changed comment formatting
 - Deduplicated comment lines
 - Clarified DRM_MODE_PROP_REFLECT_ comment

Changes since v1:
 - Moved defines from drm.h to drm_mode.h
 - Changed define prefix from DRM_ to DRM_MODE_PROP_
 - Updated uses of the defines to the new prefix
 - Removed include from drm_rect.c
 - Stopped using the BIT() macro

Signed-off-by: Robert Foss <robert.foss@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Acked-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170519205017.23307-2-robert.foss@collabora.com
2017-05-22 09:49:48 +02:00
Logan Gunthorpe
f9b67f0014 dma-buf: Rename dma-ops to prevent conflict with kunmap_atomic macro
Seeing the kunmap_atomic dma_buf_ops share the same name with a macro
in highmem.h, the former can be aliased if any dma-buf user includes
that header.

I'm personally trying to include highmem.h inside scatterlist.h and this
breaks the dma-buf code proper.

Christoph Hellwig suggested [1] renaming it and pushing this patch ASAP.

To maintain consistency I've renamed all four of kmap* and kunmap* to be
map* and unmap*. (Even though only kmap_atomic presently conflicts.)

[1] https://www.spinics.net/lists/target-devel/msg15070.html

Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1492630570-879-1-git-send-email-logang@deltatee.com
2017-04-20 13:47:46 +05:30
Daniel Vetter
41292b1fa1 drm: Add acquire ctx parameter to ->page_flip(_target)
Again just going through the motions, no functional changes in here.

Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>t
Link: http://patchwork.freedesktop.org/patch/msgid/20170322215058.8671-12-daniel.vetter@ffwll.ch
2017-03-29 09:50:38 +02:00
Daniel Vetter
1931529448 drm: Add acquire ctx parameter to ->plane_disable
Nouveau had a few direct calls to ->disable_plane, I replaced those
with drm_plane_force_disable. Same story for shmob.

Otherwise no code changes.

Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170322215058.8671-5-daniel.vetter@ffwll.ch
2017-03-29 09:14:58 +02:00
Daniel Vetter
34a2ab5e06 drm: Add acquire ctx parameter to ->update_plane
Just rolling it out, no code change here.

Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Eric Anholt <eric@anholt.net>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170322215058.8671-3-daniel.vetter@ffwll.ch
2017-03-29 09:14:01 +02:00