- Fix corner-case suspend-to-idle wakeup issue on systems where
the ACPI SCI is shared with another wakeup source (Hans de Goede).
- Add document describing system-wide suspend and resume code flows
to the admin guide (Rafael Wysocki).
- Add kernel command line option to set pm_debug_messages (Chen Yu).
- Choose schedutil as the preferred scaling governor by default on
ARM big.LITTLE systems and on x86 systems using the intel_pstate
driver in the passive mode (Linus Walleij, Rafael Wysocki).
- Drop racy and redundant checks from the PM core's device_prepare()
routine (Rafael Wysocki).
- Make resume from hibernation take the hibernation_restore() return
value into account (Dexuan Cui).
-----BEGIN PGP SIGNATURE-----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=QFDr
-----END PGP SIGNATURE-----
Merge tag 'pm-5.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"Additional power management updates.
These fix a corner-case suspend-to-idle wakeup issue on systems where
the ACPI SCI is shared with another wakeup source, add a kernel
command line option to set pm_debug_messages via the kernel command
line, add a document desctibing system-wide suspend and resume code
flows, modify cpufreq Kconfig to choose schedutil as the preferred
governor by default in a couple of cases and do some assorted
cleanups.
Specifics:
- Fix corner-case suspend-to-idle wakeup issue on systems where the
ACPI SCI is shared with another wakeup source (Hans de Goede).
- Add document describing system-wide suspend and resume code flows
to the admin guide (Rafael Wysocki).
- Add kernel command line option to set pm_debug_messages (Chen Yu).
- Choose schedutil as the preferred scaling governor by default on
ARM big.LITTLE systems and on x86 systems using the intel_pstate
driver in the passive mode (Linus Walleij, Rafael Wysocki).
- Drop racy and redundant checks from the PM core's device_prepare()
routine (Rafael Wysocki).
- Make resume from hibernation take the hibernation_restore() return
value into account (Dexuan Cui)"
* tag 'pm-5.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
platform/x86: intel_int0002_vgpio: Use acpi_register_wakeup_handler()
ACPI: PM: Add acpi_[un]register_wakeup_handler()
Documentation: PM: sleep: Document system-wide suspend code flows
cpufreq: Select schedutil when using big.LITTLE
PM: sleep: Add pm_debug_messages kernel command line option
PM: sleep: core: Drop racy and redundant checks from device_prepare()
PM: hibernate: Propagate the return value of hibernation_restore()
cpufreq: intel_pstate: Select schedutil as the default governor
* pm-sleep:
Documentation: PM: sleep: Document system-wide suspend code flows
PM: sleep: Add pm_debug_messages kernel command line option
PM: sleep: core: Drop racy and redundant checks from device_prepare()
PM: hibernate: Propagate the return value of hibernation_restore()
* pm-cpufreq:
cpufreq: Select schedutil when using big.LITTLE
cpufreq: intel_pstate: Select schedutil as the default governor
- A large series from Nick for 64-bit to further rework our exception vectors,
and rewrite portions of the syscall entry/exit and interrupt return in C. The
result is much easier to follow code that is also faster in general.
- Cleanup of our ptrace code to split various parts out that had become badly
intertwined with #ifdefs over the years.
- Changes to our NUMA setup under the PowerVM hypervisor which should
hopefully avoid non-sensical topologies which can lead to warnings from the
workqueue code and other problems.
- MAINTAINERS updates to remove some of our old orphan entries and update the
status of others.
- Quite a few other small changes and fixes all over the map.
Thanks to:
Abdul Haleem, afzal mohammed, Alexey Kardashevskiy, Andrew Donnellan, Aneesh
Kumar K.V, Balamuruhan S, Cédric Le Goater, Chen Zhou, Christophe JAILLET,
Christophe Leroy, Christoph Hellwig, Clement Courbet, Daniel Axtens, David
Gibson, Douglas Miller, Fabiano Rosas, Fangrui Song, Ganesh Goudar, Gautham R.
Shenoy, Greg Kroah-Hartman, Greg Kurz, Gustavo Luiz Duarte, Hari Bathini, Ilie
Halip, Jan Kara, Joe Lawrence, Joe Perches, Kajol Jain, Larry Finger,
Laurentiu Tudor, Leonardo Bras, Libor Pechacek, Madhavan Srinivasan, Mahesh
Salgaonkar, Masahiro Yamada, Masami Hiramatsu, Mauricio Faria de Oliveira,
Michael Neuling, Michal Suchanek, Mike Rapoport, Nageswara R Sastry, Nathan
Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Nick Desaulniers,
Oliver O'Halloran, Po-Hsu Lin, Pratik Rajesh Sampat, Rasmus Villemoes, Ravi
Bangoria, Roman Bolshakov, Sam Bobroff, Sandipan Das, Santosh S, Sedat Dilek,
Segher Boessenkool, Shilpasri G Bhat, Sourabh Jain, Srikar Dronamraju, Stephen
Rothwell, Tyrel Datwyler, Vaibhav Jain, YueHaibing.
-----BEGIN PGP SIGNATURE-----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=ARdm
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"Slightly late as I had to rebase mid-week to insert a bug fix:
- A large series from Nick for 64-bit to further rework our exception
vectors, and rewrite portions of the syscall entry/exit and
interrupt return in C. The result is much easier to follow code
that is also faster in general.
- Cleanup of our ptrace code to split various parts out that had
become badly intertwined with #ifdefs over the years.
- Changes to our NUMA setup under the PowerVM hypervisor which should
hopefully avoid non-sensical topologies which can lead to warnings
from the workqueue code and other problems.
- MAINTAINERS updates to remove some of our old orphan entries and
update the status of others.
- Quite a few other small changes and fixes all over the map.
Thanks to: Abdul Haleem, afzal mohammed, Alexey Kardashevskiy, Andrew
Donnellan, Aneesh Kumar K.V, Balamuruhan S, Cédric Le Goater, Chen
Zhou, Christophe JAILLET, Christophe Leroy, Christoph Hellwig, Clement
Courbet, Daniel Axtens, David Gibson, Douglas Miller, Fabiano Rosas,
Fangrui Song, Ganesh Goudar, Gautham R. Shenoy, Greg Kroah-Hartman,
Greg Kurz, Gustavo Luiz Duarte, Hari Bathini, Ilie Halip, Jan Kara,
Joe Lawrence, Joe Perches, Kajol Jain, Larry Finger, Laurentiu Tudor,
Leonardo Bras, Libor Pechacek, Madhavan Srinivasan, Mahesh Salgaonkar,
Masahiro Yamada, Masami Hiramatsu, Mauricio Faria de Oliveira, Michael
Neuling, Michal Suchanek, Mike Rapoport, Nageswara R Sastry, Nathan
Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Nick
Desaulniers, Oliver O'Halloran, Po-Hsu Lin, Pratik Rajesh Sampat,
Rasmus Villemoes, Ravi Bangoria, Roman Bolshakov, Sam Bobroff,
Sandipan Das, Santosh S, Sedat Dilek, Segher Boessenkool, Shilpasri G
Bhat, Sourabh Jain, Srikar Dronamraju, Stephen Rothwell, Tyrel
Datwyler, Vaibhav Jain, YueHaibing"
* tag 'powerpc-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (158 commits)
powerpc: Make setjmp/longjmp signature standard
powerpc/cputable: Remove unnecessary copy of cpu_spec->oprofile_type
powerpc: Suppress .eh_frame generation
powerpc: Drop -fno-dwarf2-cfi-asm
powerpc/32: drop unused ISA_DMA_THRESHOLD
powerpc/powernv: Add documentation for the opal sensor_groups sysfs interfaces
selftests/powerpc: Fix try-run when source tree is not writable
powerpc/vmlinux.lds: Explicitly retain .gnu.hash
powerpc/ptrace: move ptrace_triggered() into hw_breakpoint.c
powerpc/ptrace: create ppc_gethwdinfo()
powerpc/ptrace: create ptrace_get_debugreg()
powerpc/ptrace: split out ADV_DEBUG_REGS related functions.
powerpc/ptrace: move register viewing functions out of ptrace.c
powerpc/ptrace: split out TRANSACTIONAL_MEM related functions.
powerpc/ptrace: split out SPE related functions.
powerpc/ptrace: split out ALTIVEC related functions.
powerpc/ptrace: split out VSX related functions.
powerpc/ptrace: drop PARAMETER_SAVE_AREA_OFFSET
powerpc/ptrace: drop unnecessary #ifdefs CONFIG_PPC64
powerpc/ptrace: remove unused header includes
...
When we are using a system with big.LITTLE HMP
configuration, we need to use EAS to schedule the
system.
As can be seen from kernel/sched/topology.c:
"EAS can be used on a root domain if it meets all the following conditions:
1. an Energy Model (EM) is available;
2. the SD_ASYM_CPUCAPACITY flag is set in the sched_domain hierarchy.
3. no SMT is detected.
4. the EM complexity is low enough to keep scheduling overheads low;
5. schedutil is driving the frequency of all CPUs of the rd;"
This means that at the very least, schedutil needs to be
available as a scheduling policy for EAS to work on these
systems. Make this explicit by defaulting to the schedutil
governor if BIG_LITTLE is selected.
Currently users of the TC2 board (like me) has to figure these
dependencies out themselves and it is not helpful.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- In-kernel Pointer Authentication support (previously only offered to
user space).
- ARM Activity Monitors (AMU) extension support allowing better CPU
utilisation numbers for the scheduler (frequency invariance).
- Memory hot-remove support for arm64.
- Lots of asm annotations (SYM_*) in preparation for the in-kernel
Branch Target Identification (BTI) support.
- arm64 perf updates: ARMv8.5-PMU 64-bit counters, refactoring the PMU
init callbacks, support for new DT compatibles.
- IPv6 header checksum optimisation.
- Fixes: SDEI (software delegated exception interface) double-lock on
hibernate with shared events.
- Minor clean-ups and refactoring: cpu_ops accessor, cpu_do_switch_mm()
converted to C, cpufeature finalisation helper.
- sys_mremap() comment explaining the asymmetric address untagging
behaviour.
-----BEGIN PGP SIGNATURE-----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=LJVX
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"The bulk is in-kernel pointer authentication, activity monitors and
lots of asm symbol annotations. I also queued the sys_mremap() patch
commenting the asymmetry in the address untagging.
Summary:
- In-kernel Pointer Authentication support (previously only offered
to user space).
- ARM Activity Monitors (AMU) extension support allowing better CPU
utilisation numbers for the scheduler (frequency invariance).
- Memory hot-remove support for arm64.
- Lots of asm annotations (SYM_*) in preparation for the in-kernel
Branch Target Identification (BTI) support.
- arm64 perf updates: ARMv8.5-PMU 64-bit counters, refactoring the
PMU init callbacks, support for new DT compatibles.
- IPv6 header checksum optimisation.
- Fixes: SDEI (software delegated exception interface) double-lock on
hibernate with shared events.
- Minor clean-ups and refactoring: cpu_ops accessor,
cpu_do_switch_mm() converted to C, cpufeature finalisation helper.
- sys_mremap() comment explaining the asymmetric address untagging
behaviour"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (81 commits)
mm/mremap: Add comment explaining the untagging behaviour of mremap()
arm64: head: Convert install_el2_stub to SYM_INNER_LABEL
arm64: Introduce get_cpu_ops() helper function
arm64: Rename cpu_read_ops() to init_cpu_ops()
arm64: Declare ACPI parking protocol CPU operation if needed
arm64: move kimage_vaddr to .rodata
arm64: use mov_q instead of literal ldr
arm64: Kconfig: verify binutils support for ARM64_PTR_AUTH
lkdtm: arm64: test kernel pointer authentication
arm64: compile the kernel with ptrauth return address signing
kconfig: Add support for 'as-option'
arm64: suspend: restore the kernel ptrauth keys
arm64: __show_regs: strip PAC from lr in printk
arm64: unwind: strip PAC from kernel addresses
arm64: mask PAC bits of __builtin_return_address
arm64: initialize ptrauth keys for kernel booting task
arm64: initialize and switch ptrauth kernel keys
arm64: enable ptrauth earlier
arm64: cpufeature: handle conflicts based on capability
arm64: cpufeature: Move cpu capability helpers inside C file
...
Pull scheduler updates from Ingo Molnar:
"The main changes in this cycle are:
- Various NUMA scheduling updates: harmonize the load-balancer and
NUMA placement logic to not work against each other. The intended
result is better locality, better utilization and fewer migrations.
- Introduce Thermal Pressure tracking and optimizations, to improve
task placement on thermally overloaded systems.
- Implement frequency invariant scheduler accounting on (some) x86
CPUs. This is done by observing and sampling the 'recent' CPU
frequency average at ~tick boundaries. The CPU provides this data
via the APERF/MPERF MSRs. This hopefully makes our capacity
estimates more precise and keeps tasks on the same CPU better even
if it might seem overloaded at a lower momentary frequency. (As
usual, turbo mode is a complication that we resolve by observing
the maximum frequency and renormalizing to it.)
- Add asymmetric CPU capacity wakeup scan to improve capacity
utilization on asymmetric topologies. (big.LITTLE systems)
- PSI fixes and optimizations.
- RT scheduling capacity awareness fixes & improvements.
- Optimize the CONFIG_RT_GROUP_SCHED constraints code.
- Misc fixes, cleanups and optimizations - see the changelog for
details"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (62 commits)
threads: Update PID limit comment according to futex UAPI change
sched/fair: Fix condition of avg_load calculation
sched/rt: cpupri_find: Trigger a full search as fallback
kthread: Do not preempt current task if it is going to call schedule()
sched/fair: Improve spreading of utilization
sched: Avoid scale real weight down to zero
psi: Move PF_MEMSTALL out of task->flags
MAINTAINERS: Add maintenance information for psi
psi: Optimize switching tasks inside shared cgroups
psi: Fix cpu.pressure for cpu.max and competing cgroups
sched/core: Distribute tasks within affinity masks
sched/fair: Fix enqueue_task_fair warning
thermal/cpu-cooling, sched/core: Move the arch_set_thermal_pressure() API to generic scheduler code
sched/rt: Remove unnecessary push for unfit tasks
sched/rt: Allow pulling unfitting task
sched/rt: Optimize cpupri_find() on non-heterogenous systems
sched/rt: Re-instate old behavior in select_task_rq_rt()
sched/rt: cpupri_find: Implement fallback mechanism for !fit case
sched/fair: Fix reordering of enqueue/dequeue_task_fair()
sched/fair: Fix runnable_avg for throttled cfs
...
Pull perf updates from Ingo Molnar:
"The main changes in this cycle were:
Kernel side changes:
- A couple of x86/cpu cleanups and changes were grandfathered in due
to patch dependencies. These clean up the set of CPU model/family
matching macros with a consistent namespace and C99 initializer
style.
- A bunch of updates to various low level PMU drivers:
* AMD Family 19h L3 uncore PMU
* Intel Tiger Lake uncore support
* misc fixes to LBR TOS sampling
- optprobe fixes
- perf/cgroup: optimize cgroup event sched-in processing
- misc cleanups and fixes
Tooling side changes are to:
- perf {annotate,expr,record,report,stat,test}
- perl scripting
- libapi, libperf and libtraceevent
- vendor events on Intel and S390, ARM cs-etm
- Intel PT updates
- Documentation changes and updates to core facilities
- misc cleanups, fixes and other enhancements"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (89 commits)
cpufreq/intel_pstate: Fix wrong macro conversion
x86/cpu: Cleanup the now unused CPU match macros
hwrng: via_rng: Convert to new X86 CPU match macros
crypto: Convert to new CPU match macros
ASoC: Intel: Convert to new X86 CPU match macros
powercap/intel_rapl: Convert to new X86 CPU match macros
PCI: intel-mid: Convert to new X86 CPU match macros
mmc: sdhci-acpi: Convert to new X86 CPU match macros
intel_idle: Convert to new X86 CPU match macros
extcon: axp288: Convert to new X86 CPU match macros
thermal: Convert to new X86 CPU match macros
hwmon: Convert to new X86 CPU match macros
platform/x86: Convert to new CPU match macros
EDAC: Convert to new X86 CPU match macros
cpufreq: Convert to new X86 CPU match macros
ACPI: Convert to new X86 CPU match macros
x86/platform: Convert to new CPU match macros
x86/kernel: Convert to new CPU match macros
x86/kvm: Convert to new CPU match macros
x86/perf/events: Convert to new CPU match macros
...
Modify cpufreq Kconfig to select schedutil as the default governor
if the intel_pstate driver has been selected and SMP support is
enabled (because schedutil depends on SMP).
Also select schedutil as well as the performance governor from the
intel_pstate Kconfig section to ensure the equivalence of the passive
and active mode governor configuration options.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The initial policy value set by intel_pstate_cpu_init() depends on
whether or not CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is set, but
that is not necessary, because the core will set the policy to
"performance" in cpufreq_init_policy() if the default governor is
"performance" anyway.
Accordingly, change intel_pstate_cpu_init() to always set policy
to CPUFREQ_POLICY_POWERSAVE initially to provide a valid fallback
value to cpufreq_init_policy() in case the default cpufreq governor
is neither "powersave" nor "performance".
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The feature flag hwp_support_ids are supposed to match on is
X86_FEATURE_HWP, not X86_FEATURE_APERFMPERF. Fix it.
[ bp: Write commit message. ]
Fixes: b11d77fa30 ("cpufreq: Convert to new X86 CPU match macros")
Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200324060124.GC11705@shao2-debian
The patch avoids allocating cpufreq_policy on stack hence fixing frame
size overflow in 'powernv_cpufreq_work_fn'
Fixes: 227942809b ("cpufreq: powernv: Restore cpu frequency to policy->cur on unthrottling")
Signed-off-by: Pratik Rajesh Sampat <psampat@linux.ibm.com>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200316135743.57735-1-psampat@linux.ibm.com
The new macro set has a consistent namespace and uses C99 initializers
instead of the grufty C89 ones.
Get rid the of most local macro wrappers for consistency. The ones which
make sense for readability are renamed to X86_MATCH*.
In the centrino driver this also removes the two extra duplicates of family
6 model 13 which have no value at all.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lkml.kernel.org/r/87eetheu88.fsf@nanos.tec.linutronix.de
There is no reason that this gunk is in a generic header file. The wildcard
defines need to stay as they are required by file2alias.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lkml.kernel.org/r/20200320131508.736205164@linutronix.de
Pull ARM cpufreq drivers updates for v5.7 from Viresh Kumar:
"This pull request contains:
- update to imx cpufreq drivers to improve their support (Anson Huang,
Christoph Niedermaier, and Peng Fan).
- Update to qcom cpufreq to support other krait based SoCs (Ansuel
Smith).
- Update ti cpufreq driver to support OPP_PLUS (Lokesh Vutla).
- Update cpufreq-dt driver to allow platfoem specific intermediate
callbacks (Peng Fan)."
* 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: qcom: Add support for krait based socs
cpufreq: imx6q-cpufreq: Improve the logic of -EPROBE_DEFER handling
cpufreq: dt: Allow platform specific intermediate callbacks
cpufreq: imx-cpufreq-dt: Correct i.MX8MP's market segment fuse location
cpufreq: imx6q: read OCOTP through nvmem for imx6q
cpufreq: imx6q: fix error handling
cpufreq: imx-cpufreq-dt: Add "cpu-supply" property check
cpufreq: ti-cpufreq: Add support for OPP_PLUS
cpufreq: imx6q: Fixes unwanted cpu overclocking on i.MX6ULL
In Certain QCOM SoCs like ipq8064, apq8064, msm8960, msm8974
that has KRAIT processors the voltage/current value of each OPP
varies based on the silicon variant in use.
The required OPP related data is determined based on
the efuse value. This is similar to the existing code for
kryo cores. So adding support for krait cores here.
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Since snprintf() returns the would-be-output size instead of the
actual output size, the succeeding calls may go beyond the given
buffer limit. Fix it by replacing with scnprintf().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There is still some code duplication between intel_pstate_verify_policy()
and intel_cpufreq_verify_policy(), so avoid it by moving the common
code into a separate function and calling it from both these places.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The PowerNV cpufreq driver registers two notifiers: one to catch
throttle messages from the OCC and one to bump the CPU frequency back
to normal before a reboot. Both require the cpufreq driver to be
registered in order to function since the notifier callbacks use
various cpufreq_*() functions.
Right now we register both notifiers before we've initialised the
driver. This seems to work, but we should head off any protential
problems by registering the notifiers after the driver is initialised.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200206062622.28235-2-oohall@gmail.com
The cpufreq driver has a use-after-free that we can hit if:
a) There's an OCC message pending when the notifier is registered, and
b) The cpufreq driver fails to register with the core.
When a) occurs the notifier schedules a workqueue item to handle the
message. The backing work_struct is located on chips[].throttle and
when b) happens we clean up by freeing the array. Once we get to
the (now free) queued item and the kernel crashes.
Fixes: c5e29ea7ac ("cpufreq: powernv: Fix bugs in powernv_cpufreq_{init/exit}")
Cc: stable@vger.kernel.org # v4.6+
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200206062622.28235-1-oohall@gmail.com
Platforms may need to implement platform specific get_intermediate and
target_intermediate hooks.
Update cpufreq-dt driver's platform data to contain those for such
platforms.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Add weak function to return the hardware maximum frequency of a CPU,
with the default implementation returning cpuinfo.max_freq, which is
the best information we can generically get from the cpufreq framework.
The default can be overwritten by a strong function in platforms
that want to provide an alternative implementation, with more accurate
information, obtained either from hardware or firmware.
Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Directly accessing OCOTP registers should be avoided, because
it could not handle OCOTP clks and could not handle defer
proper. With nvmem API, it is safe to access OCOTP registers.
To make sure old dtb could work, the original code still kept.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
When speed checking failed, direclty jumping to put_node label
is not correct. Need jump to out_free_opp to avoid resources leak.
Fixes: 2733fb0d06 ("cpufreq: imx6q: read OCOTP through nvmem for imx6ul/imx6ull")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Before commit 1e4f63aecb ("cpufreq: Avoid creating excessively
large stack frames") the initial value of the policy field in struct
cpufreq_policy set by the driver's ->init() callback was implicitly
passed from cpufreq_init_policy() to cpufreq_set_policy() if the
default governor was neither "performance" nor "powersave". After
that commit, however, cpufreq_init_policy() must take that case into
consideration explicitly and handle it as appropriate, so make that
happen.
Fixes: 1e4f63aecb ("cpufreq: Avoid creating excessively large stack frames")
Link: https://lore.kernel.org/linux-pm/39fb762880c27da110086741315ca8b111d781cd.camel@gmail.com/
Reported-by: Artem Bityutskiy <dedekind1@gmail.com>
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
The cpufreq-dt driver allows cpufreq driver enabled without valid
regulator assigned, however, all i.MX platforms using cpufreq-dt
driver now require valid regulator, add "cpu-supply" property check
to avoid i.MX platforms' cpufreq enabled without valid regulator
and lead to system unstable.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
DRA762 SoC introduces OPP_PLUS which runs at 1.8GHz. Add
support for this OPP in ti-cpufreq driver.
Acked-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
imx6ul_opp_check_speed_grading is called for both i.MX6UL and i.MX6ULL.
Since the i.MX6ULL was introduced to a separate ocotp compatible node
later, it is possible that the i.MX6ULL has also dtbs with
"fsl,imx6ull-ocotp". On a system without nvmem-cell speed grade a
missing check on this node causes a driver fail without considering
the cpu speed grade.
This patch prevents unwanted cpu overclocking on i.MX6ULL with compatible
node "fsl,imx6ull-ocotp" in old dtbs without nvmem-cell speed grade.
Fixes: 2733fb0d06 ("cpufreq: imx6q: read OCOTP through nvmem for imx6ul/imx6ull")
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Various driver updates for platforms:
- Nvidia: Fuse support for Tegra194, continued memory controller pieces
for Tegra30
- NXP/FSL: Refactorings of QuickEngine drivers to support ARM/ARM64/PPC
- NXP/FSL: i.MX8MP SoC driver pieces
- TI Keystone: ring accelerator driver
- Qualcomm: SCM driver cleanup/refactoring + support for new SoCs.
- Xilinx ZynqMP: feature checking interface for firmware. Mailbox
communication for power management
- Overall support patch set for cpuidle on more complex hierarchies
(PSCI-based)
+ Misc cleanups, refactorings of Marvell, TI, other platforms.
-----BEGIN PGP SIGNATURE-----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=ONtb
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC-related driver updates from Olof Johansson:
"Various driver updates for platforms:
- Nvidia: Fuse support for Tegra194, continued memory controller
pieces for Tegra30
- NXP/FSL: Refactorings of QuickEngine drivers to support
ARM/ARM64/PPC
- NXP/FSL: i.MX8MP SoC driver pieces
- TI Keystone: ring accelerator driver
- Qualcomm: SCM driver cleanup/refactoring + support for new SoCs.
- Xilinx ZynqMP: feature checking interface for firmware. Mailbox
communication for power management
- Overall support patch set for cpuidle on more complex hierarchies
(PSCI-based)
and misc cleanups, refactorings of Marvell, TI, other platforms"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (166 commits)
drivers: soc: xilinx: Use mailbox IPI callback
dt-bindings: power: reset: xilinx: Add bindings for ipi mailbox
drivers: soc: ti: knav_qmss_queue: Pass lockdep expression to RCU lists
MAINTAINERS: Add brcmstb PCIe controller entry
soc/tegra: fuse: Unmap registers once they are not needed anymore
soc/tegra: fuse: Correct straps' address for older Tegra124 device trees
soc/tegra: fuse: Warn if straps are not ready
soc/tegra: fuse: Cache values of straps and Chip ID registers
memory: tegra30-emc: Correct error message for timed out auto calibration
memory: tegra30-emc: Firm up hardware programming sequence
memory: tegra30-emc: Firm up suspend/resume sequence
soc/tegra: regulators: Do nothing if voltage is unchanged
memory: tegra: Correct reset value of xusb_hostr
soc/tegra: fuse: Add APB DMA dependency for Tegra20
bus: tegra-aconnect: Remove PM_CLK dependency
dt-bindings: mediatek: add MT6765 power dt-bindings
soc: mediatek: cmdq: delete not used define
memory: tegra: Add support for the Tegra194 memory controller
memory: tegra: Only include support for enabled SoCs
memory: tegra: Support DVFS on Tegra186 and later
...
The cpufreq_global_kobject is only used internally by cpufreq.c
after commit 2361be2366 ("cpufreq: Don't create empty
/sys/devices/system/cpu/cpufreq directory").
Make it static.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
[ rjw: Add empty line after cpufreq_global_kobject definition ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Prevent cpufreq from creating excessively large stack frames and fix
the handling of devices deleted during system-wide resume in the PM
core (Rafael Wysocki), revert a problematic commit affecting the
cpupower utility and correct its man page (Thomas Renninger,
Brahadambal Srinivasan), and improve the intel_pstate_tracer
utility (Doug Smythies).
-----BEGIN PGP SIGNATURE-----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=ctQq
-----END PGP SIGNATURE-----
Merge tag 'pm-5.6-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power manadement updates from Rafael Wysocki:
"Prevent cpufreq from creating excessively large stack frames and fix
the handling of devices deleted during system-wide resume in the PM
core (Rafael Wysocki), revert a problematic commit affecting the
cpupower utility and correct its man page (Thomas Renninger,
Brahadambal Srinivasan), and improve the intel_pstate_tracer utility
(Doug Smythies)"
* tag 'pm-5.6-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
tools/power/x86/intel_pstate_tracer: change several graphs to autoscale y-axis
tools/power/x86/intel_pstate_tracer: changes for python 3 compatibility
Correction to manpage of cpupower
cpufreq: Avoid creating excessively large stack frames
PM: core: Fix handling of devices deleted during system-wide resume
cpupower: Revert library ABI changes from commit ae2917093f
On some platforms such as the Dell XPS 13 laptop the firmware disables turbo
when the machine is disconnected from AC, and viceversa it enables it again
when it's reconnected. In these cases a _PPC ACPI notification is issued.
The scheduler needs to know freq_max for frequency-invariant calculations.
To account for turbo availability to come and go, record freq_max at boot as
if turbo was available and store it in a helper variable. Use a setter
function to swap between freq_base and freq_max every time turbo goes off or on.
Signed-off-by: Giovanni Gherdovich <ggherdovich@suse.cz>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lkml.kernel.org/r/20200122151617.531-7-ggherdovich@suse.cz
- remove ioremap_nocache given that is is equivalent to
ioremap everywhere
-----BEGIN PGP SIGNATURE-----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=TUCJ
-----END PGP SIGNATURE-----
Merge tag 'ioremap-5.6' of git://git.infradead.org/users/hch/ioremap
Pull ioremap updates from Christoph Hellwig:
"Remove the ioremap_nocache API (plus wrappers) that are always
identical to ioremap"
* tag 'ioremap-5.6' of git://git.infradead.org/users/hch/ioremap:
remove ioremap_nocache and devm_ioremap_nocache
MIPS: define ioremap_nocache to ioremap
In the process of modifying a cpufreq policy, the cpufreq core makes
a copy of it including all of the internals which is stored on the
CPU stack. Because struct cpufreq_policy is relatively large, this
may cause the size of the stack frame to exceed the 2 KB limit and
so the GCC complains when -Wframe-larger-than= is used.
In fact, it is not necessary to copy the entire policy structure
in order to modify it, however.
First, because cpufreq_set_policy() obtains the min and max policy
limits from frequency QoS now, it is not necessary to pass the limits
to it from the callers. The only things that need to be passed to it
from there are the new governor pointer or (if there is a built-in
governor in the driver) the "policy" value representing the governor
choice. They both can be passed as individual arguments, though, so
make cpufreq_set_policy() take them this way and rework its callers
accordingly. This avoids making copies of cpufreq policies in the
callers of cpufreq_set_policy().
Second, cpufreq_set_policy() still needs to pass the new policy
data to the ->verify() callback of the cpufreq driver whose task
is to sanitize the min and max policy limits. It still does not
need to make a full copy of struct cpufreq_policy for this purpose,
but it needs to pass a few items from it to the driver in case they
are needed (different drivers have different needs in that respect
and all of them have to be covered). For this reason, introduce
struct cpufreq_policy_data to hold copies of the members of
struct cpufreq_policy used by the existing ->verify() driver
callbacks and pass a pointer to a temporary structure of that
type to ->verify() (instead of passing a pointer to full struct
cpufreq_policy to it).
While at it, notice that intel_pstate and longrun don't really need
to verify the "policy" value in struct cpufreq_policy, so drop those
check from them to avoid copying "policy" into struct
cpufreq_policy_data (which allows it to be slightly smaller).
Also while at it fix up white space in a couple of places and make
cpufreq_set_policy() static (as it can be so).
Fixes: 3000ce3c52 ("cpufreq: Use per-policy frequency QoS")
Link: https://lore.kernel.org/linux-pm/CAMuHMdX6-jb1W8uC2_237m8ctCpsnGp=JCxqt8pCWVqNXHmkVg@mail.gmail.com
Reported-by: kbuild test robot <lkp@intel.com>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Pull cpufreq material for v5.6 from Viresh Kumar:
"This contains:
- Update to imx cpufreq driver to add support for i.MX8MP platform.
- Blacklists few NVIDIA SoCs from cpufreq-dt-platdev layer.
- Convertion of few platform drivers to use
devm_platform_ioremap_resource().
- Fixed refcount imbalance in few drivers."
* 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: brcmstb-avs: fix imbalance of cpufreq policy refcount
cpufreq: s3c: fix unbalances of cpufreq policy refcount
cpufreq: imx-cpufreq-dt: Add i.MX8MP support
cpufreq: Use imx-cpufreq-dt for i.MX8MP's speed grading
cpufreq: tegra186: convert to devm_platform_ioremap_resource
cpufreq: kirkwood: convert to devm_platform_ioremap_resource
The post-fork cleanup of loongson2ef from loongson64 changed
LOONGSON_CHIPCFG from a single-argument functional macro to a
non-functional macro with an mmio address in loongson2ef, but
loongson2_cpufreq still uses the notation of a functional macro call
expecting it to be an lvalue. Fixed based on loongson_suspend_enter.
Signed-off-by: Alexandre Oliva <lxoliva@fsfla.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
brcm_avs_cpufreq_get() calls cpufreq_cpu_get() to get the cpufreq
policy, meanwhile, it also increments the kobject reference count
to mark it busy. However, a corresponding call of cpufreq_cpu_put()
is ignored to decrement the kobject reference count back, which may
lead to a potential stuck risk that the cpuhp thread deadly waits
for dropping of kobject refcount when cpufreq policy free.
With this patch, the cpuhp thread can be easily exercised by
attempting to force an unbind of the CPUfreq driver.
Signed-off-by: chenqiwu <chenqiwu@xiaomi.com>
[ Viresh: Dropped !policy check ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Fix a spelling typo in the comment, no function change.
Signed-off-by: Harry Pan <harry.pan@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
corresponding cpuidle driver. This support is based upon using the generic
PM domain, which already supports devices belonging to CPUs.
Finally, these is a DTS patch that enables the hierarchical topology to be
used for the Qcom 410c Dragonboard, which supports the PSCI OS-initiated
mode.
-----BEGIN PGP SIGNATURE-----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=WFox
-----END PGP SIGNATURE-----
Merge tag 'cpuidle_psci-v5.5-rc4' of git://git.linaro.org/people/ulf.hansson/linux-pm into arm/drivers
Initial support for hierarchical CPU arrangement, managed by PSCI and its
corresponding cpuidle driver. This support is based upon using the generic
PM domain, which already supports devices belonging to CPUs.
Finally, these is a DTS patch that enables the hierarchical topology to be
used for the Qcom 410c Dragonboard, which supports the PSCI OS-initiated
mode.
* tag 'cpuidle_psci-v5.5-rc4' of git://git.linaro.org/people/ulf.hansson/linux-pm: (611 commits)
arm64: dts: Convert to the hierarchical CPU topology layout for MSM8916
cpuidle: psci: Add support for PM domains by using genpd
PM / Domains: Introduce a genpd OF helper that removes a subdomain
cpuidle: psci: Support CPU hotplug for the hierarchical model
cpuidle: psci: Manage runtime PM in the idle path
cpuidle: psci: Prepare to use OS initiated suspend mode via PM domains
cpuidle: psci: Attach CPU devices to their PM domains
cpuidle: psci: Add a helper to attach a CPU to its PM domain
cpuidle: psci: Support hierarchical CPU idle states
cpuidle: psci: Simplify OF parsing of CPU idle state nodes
cpuidle: dt: Support hierarchical CPU idle states
of: base: Add of_get_cpu_state_node() to get idle states for a CPU node
firmware: psci: Export functions to manage the OSI mode
dt: psci: Update DT bindings to support hierarchical PSCI states
cpuidle: psci: Align psci_power_state count with idle state count
Linux 5.5-rc4
locks: print unsigned ino in /proc/locks
riscv: export flush_icache_all to modules
riscv: reject invalid syscalls below -1
riscv: fix compile failure with EXPORT_SYMBOL() & !MMU
...
Link: https://lore.kernel.org/r/20200102160820.3572-1-ulf.hansson@linaro.org
Signed-off-by: Olof Johansson <olof@lixom.net>
Pull cpufreq driver fix for v5.5-rc6 from Viresh Kumar:
"Blacklist Tegra20/30 for probing by cpufreq-dt driver."
* 'cpufreq/arm/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: dt-platdev: Blacklist NVIDIA Tegra20 and Tegra30 SoCs
The cpufreq_reboot_notifier_evt() call cpufreq_cpu_get() to get the
cpufreq policy of cpu0, meanwhile, it also increments the kobject
reference count to mark it busy. However, a corresponding call of
cpufreq_cpu_put() is ignored to decrement the kobject reference count
back, which may lead to a potential stuck risk that the cpuhp thread
deadly waits for dropping of kobject refcount when cpufreq policy free.
With this patch, the cpuhp thread can be easily exercised by attempting
to force an unbind of the CPUfreq driver.
Signed-off-by: chenqiwu <chenqiwu@xiaomi.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Add i.MX8MP cpufreq DT support for speed grading and market
segment check.
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
[ Viresh: Minor formatting fixes ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Add i.MX8MP to blacklist, so that imx-cpufreq-dt driver can handle
speed grading bits just like other i.MX8M SoCs.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Use devm_platform_ioremap_resource() to simplify code.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Use devm_platform_ioremap_resource() to simplify code.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
ioremap has provided non-cached semantics by default since the Linux 2.6
days, so remove the additional ioremap_nocache interface.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Put the ACPI table to release the table mapping after using it
successfully.
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
[ rjw: Subject & changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Bail out if we match the OEM information, to save some possible
extra iteration.
Also update the code to fix minor coding style issue.
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
[ rjw: Subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The scmi bus now has support to match the driver with devices not only
based on their protocol id but also based on their device name if one is
available. This was added to cater the need to support multiple devices
and drivers for the same protocol.
Let us add the name "cpufreq" to scmi_device_id table in the driver so
that in matches only with device with the same name and protocol id
SCMI_PROTOCOL_PERF. This will help to add "devfreq" device/driver.
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Both NVIDIA Tegra20 and Tegra30 SoCs should be blacklisted because CPU
OPPs use supported_hw and thus platdev isn't suitable for these SoCs.
Currently cpufreq-dt driver produces a bit annoying warning splats
during boot because valid OPPs are not found, this will be fixed once
tegra20-cpufreq driver will be update to support cpufreq-dt. The warnings
will also happen on older stable kernels using newer device-trees, thus
this patch should be backported to stable kernels as well.
Cc: <stable@vger.kernel.org>
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Fixes: 4053aa65c5 ("ARM: tegra: cardhu-a04: Add CPU Operating Performance Points")
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Since commit ca74b316df ("arm: Use common cpu_topology structure and
functions.") the core cpumask has to be modified during cpu hotplug
operations. So using them to set up cpufreq policy cpumask may be
incorrect as it may contain only cpus that are online at that instance.
Instead, we can use the cpumask setup by OPP library that contains all
the cpus sharing OPP table using dev_pm_opp_get_sharing_cpus.
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Implements support for suspend/resume on Tegra124.
-----BEGIN PGP SIGNATURE-----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=1y1w
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.5-cpufreq' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/fixes
cpufreq: tegra: Changes for v5.5-rc1
Implements support for suspend/resume on Tegra124.
* tag 'tegra-for-5.5-cpufreq' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
cpufreq: tegra124: Add suspend and resume support
Link: https://lore.kernel.org/r/20191204130753.3614278-3-thierry.reding@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Pull thermal management updates from Zhang Rui:
- Fix a deadlock regression in thermal core framework, which was
introduced in 5.3 (Wei Wang)
- Initialize thermal control framework earlier to enable thermal
mitigation during boot (Amit Kucheria)
- Convert the Intelligent Power Allocator (IPA) thermal governor to
follow the generic PM_EM instead of its own Energy Model (Quentin
Perret)
- Introduce a new Amlogic soc thermal driver (Guillaume La Roque)
- Add interrupt support for tsens thermal driver (Amit Kucheria)
- Add support for MSM8956/8976 in tsens thermal driver
(AngeloGioacchino Del Regno)
- Add support for r8a774b1 in rcar thermal driver (Biju Das)
- Add support for Thermal Monitor Unit v2 in qoriq thermal driver
(Yuantian Tang)
- Some other fixes/cleanups on thermal core framework and soc thermal
drivers (Colin Ian King, Daniel Lezcano, Hsin-Yi Wang, Tian Tao)
* 'thermal/next' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (32 commits)
thermal: Fix deadlock in thermal thermal_zone_device_check
thermal: cpu_cooling: Migrate to using the EM framework
thermal: cpu_cooling: Make the power-related code depend on IPA
PM / EM: Declare EM data types unconditionally
arm64: defconfig: Enable CONFIG_ENERGY_MODEL
drivers: thermal: tsens: fix potential integer overflow on multiply
thermal: cpu_cooling: Reorder the header file
thermal: cpu_cooling: Remove pointless dependency on CONFIG_OF
thermal: no need to set .owner when using module_platform_driver
thermal: qcom: tsens-v1: Fix kfree of a non-pointer value
cpufreq: qcom-hw: Move driver initialization earlier
clk: qcom: Initialize clock drivers earlier
cpufreq: Initialize cpufreq-dt driver earlier
cpufreq: Initialize the governors in core_initcall
thermal: Initialize thermal subsystem earlier
thermal: Remove netlink support
dt: thermal: tsens: Document compatible for MSM8976/56
thermal: qcom: tsens-v1: Add support for MSM8956 and MSM8976
MAINTAINERS: add entry for Amlogic Thermal driver
thermal: amlogic: Add thermal driver to support G12 SoCs
...
Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
$ sed -e 's/^ /\t/' -i */Kconfig
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Use nanoseconds (instead of microseconds) as the unit of time in
the cpuidle core and simplify checks for disabled idle states in
the idle loop (Rafael Wysocki).
- Fix and clean up the teo cpuidle governor (Rafael Wysocki).
- Fix the cpuidle registration error code path (Zhenzhong Duan).
- Avoid excessive vmexits in the ACPI cpuidle driver (Yin Fengwei).
- Extend the idle injection infrastructure to be able to measure the
requested duration in nanoseconds and to allow an exit latency
limit for idle states to be specified (Daniel Lezcano).
- Fix cpufreq driver registration and clarify a comment in the
cpufreq core (Viresh Kumar).
- Add NULL checks to the show() and store() methods of sysfs
attributes exposed by cpufreq (Kai Shen).
- Update cpufreq drivers:
* Fix for a plain int as pointer warning from sparse in
intel_pstate (Jamal Shareef).
* Fix for a hardcoded number of CPUs and stack bloat in the
powernv driver (John Hubbard).
* Updates to the ti-cpufreq driver and DT files to support new
platforms and migrate bindings from opp-v1 to opp-v2 (Adam Ford,
H. Nikolaus Schaller).
* Merging of the arm_big_little and vexpress-spc drivers and
related cleanup (Sudeep Holla).
* Fix for imx's default speed grade value (Anson Huang).
* Minor cleanup of the s3c64xx driver (Nathan Chancellor).
* CPU speed bin detection fix for sun50i (Ondrej Jirman).
- Appoint Chanwoo Choi as the new devfreq maintainer.
- Update the devfreq core:
* Check NULL governor in available_governors_show sysfs to prevent
showing wrong governor information and fix a race condition
between devfreq_update_status() and trans_stat_show() (Leonard
Crestez).
* Add new 'interrupt-driven' flag for devfreq governors to allow
interrupt-driven governors to prevent the devfreq core from
polling devices for status (Dmitry Osipenko).
* Improve an error message in devfreq_add_device() (Matthias
Kaehlcke).
- Update devfreq drivers:
* tegra30 driver fixes and cleanups (Dmitry Osipenko).
* Removal of unused property from dt-binding documentation for
the exynos-bus driver (Kamil Konieczny).
* exynos-ppmu cleanup and DT bindings update (Lukasz Luba, Marek
Szyprowski).
- Add new CPU IDs for CometLake Mobile and Desktop to the Intel RAPL
power capping driver (Zhang Rui).
- Allow device initialization in the generic power domains (genpd)
framework to be more straightforward and clean it up (Ulf Hansson).
- Add support for adjusting OPP voltages at run time to the OPP
framework (Stephen Boyd).
- Avoid freeing memory that has never been allocated in the
hibernation core (Andy Whitcroft).
- Clean up function headers in a header file and coding style in the
wakeup IRQs handling code (Ulf Hansson, Xiaofei Tan).
- Clean up the SmartReflex adaptive voltage scaling (AVS) driver for
ARM (Ben Dooks, Geert Uytterhoeven).
- Wrap power management documentation to fit in 80 columns (Bjorn
Helgaas).
- Add pm-graph utility entry to MAINTAINERS (Todd Brandt).
- Update the cpupower utility:
* Fix the handling of set and info subcommands (Abhishek Goel).
* Fix build warnings (Nathan Chancellor).
* Improve mperf_monitor handling (Janakarajan Natarajan).
-----BEGIN PGP SIGNATURE-----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=GJvT
-----END PGP SIGNATURE-----
Merge tag 'pm-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These include cpuidle changes to use nanoseconds (instead of
microseconds) as the unit of time and to simplify checks for disabled
idle states in the idle loop, some cpuidle fixes and governor updates,
assorted cpufreq updates (driver updates mostly and a few core fixes
and cleanups), devfreq updates (dominated by the tegra30 driver
changes), new CPU IDs for the RAPL power capping driver, relatively
minor updates of the generic power domains (genpd) and operation
performance points (OPP) frameworks, and assorted fixes and cleanups.
There are also two maintainer information updates: Chanwoo Choi will
be maintaining the devfreq subsystem going forward and Todd Brandt is
going to maintain the pm-graph utility (created by him).
Specifics:
- Use nanoseconds (instead of microseconds) as the unit of time in
the cpuidle core and simplify checks for disabled idle states in
the idle loop (Rafael Wysocki)
- Fix and clean up the teo cpuidle governor (Rafael Wysocki)
- Fix the cpuidle registration error code path (Zhenzhong Duan)
- Avoid excessive vmexits in the ACPI cpuidle driver (Yin Fengwei)
- Extend the idle injection infrastructure to be able to measure the
requested duration in nanoseconds and to allow an exit latency
limit for idle states to be specified (Daniel Lezcano)
- Fix cpufreq driver registration and clarify a comment in the
cpufreq core (Viresh Kumar)
- Add NULL checks to the show() and store() methods of sysfs
attributes exposed by cpufreq (Kai Shen)
- Update cpufreq drivers:
* Fix for a plain int as pointer warning from sparse in
intel_pstate (Jamal Shareef)
* Fix for a hardcoded number of CPUs and stack bloat in the
powernv driver (John Hubbard)
* Updates to the ti-cpufreq driver and DT files to support new
platforms and migrate bindings from opp-v1 to opp-v2 (Adam Ford,
H. Nikolaus Schaller)
* Merging of the arm_big_little and vexpress-spc drivers and
related cleanup (Sudeep Holla)
* Fix for imx's default speed grade value (Anson Huang)
* Minor cleanup of the s3c64xx driver (Nathan Chancellor)
* CPU speed bin detection fix for sun50i (Ondrej Jirman)
- Appoint Chanwoo Choi as the new devfreq maintainer.
- Update the devfreq core:
* Check NULL governor in available_governors_show sysfs to prevent
showing wrong governor information and fix a race condition
between devfreq_update_status() and trans_stat_show() (Leonard
Crestez)
* Add new 'interrupt-driven' flag for devfreq governors to allow
interrupt-driven governors to prevent the devfreq core from
polling devices for status (Dmitry Osipenko)
* Improve an error message in devfreq_add_device() (Matthias
Kaehlcke)
- Update devfreq drivers:
* tegra30 driver fixes and cleanups (Dmitry Osipenko)
* Removal of unused property from dt-binding documentation for the
exynos-bus driver (Kamil Konieczny)
* exynos-ppmu cleanup and DT bindings update (Lukasz Luba, Marek
Szyprowski)
- Add new CPU IDs for CometLake Mobile and Desktop to the Intel RAPL
power capping driver (Zhang Rui)
- Allow device initialization in the generic power domains (genpd)
framework to be more straightforward and clean it up (Ulf Hansson)
- Add support for adjusting OPP voltages at run time to the OPP
framework (Stephen Boyd)
- Avoid freeing memory that has never been allocated in the
hibernation core (Andy Whitcroft)
- Clean up function headers in a header file and coding style in the
wakeup IRQs handling code (Ulf Hansson, Xiaofei Tan)
- Clean up the SmartReflex adaptive voltage scaling (AVS) driver for
ARM (Ben Dooks, Geert Uytterhoeven)
- Wrap power management documentation to fit in 80 columns (Bjorn
Helgaas)
- Add pm-graph utility entry to MAINTAINERS (Todd Brandt)
- Update the cpupower utility:
* Fix the handling of set and info subcommands (Abhishek Goel)
* Fix build warnings (Nathan Chancellor)
* Improve mperf_monitor handling (Janakarajan Natarajan)"
* tag 'pm-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (83 commits)
PM: Wrap documentation to fit in 80 columns
cpuidle: Pass exit latency limit to cpuidle_use_deepest_state()
cpuidle: Allow idle injection to apply exit latency limit
cpuidle: Introduce cpuidle_driver_state_disabled() for driver quirks
cpuidle: teo: Avoid code duplication in conditionals
cpufreq: Register drivers only after CPU devices have been registered
cpuidle: teo: Avoid using "early hits" incorrectly
cpuidle: teo: Exclude cpuidle overhead from computations
PM / Domains: Convert to dev_to_genpd_safe() in genpd_syscore_switch()
mmc: tmio: Avoid boilerplate code in ->runtime_suspend()
PM / Domains: Implement the ->start() callback for genpd
PM / Domains: Introduce dev_pm_domain_start()
ARM: OMAP2+: SmartReflex: add omap_sr_pdata definition
PM / wakeirq: remove unnecessary parentheses
power: avs: smartreflex: Remove superfluous cast in debugfs_create_file() call
cpuidle: Use nanoseconds as the unit of time
PM / OPP: Support adjusting OPP voltages at runtime
PM / core: Clean up some function headers in power.h
cpufreq: Add NULL checks to show() and store() methods of cpufreq
cpufreq: intel_pstate: Fix plain int as pointer warning from sparse
...
Pull scheduler updates from Ingo Molnar:
"The biggest changes in this cycle were:
- Make kcpustat vtime aware (Frederic Weisbecker)
- Rework the CFS load_balance() logic (Vincent Guittot)
- Misc cleanups, smaller enhancements, fixes.
The load-balancing rework is the most intrusive change: it replaces
the old heuristics that have become less meaningful after the
introduction of the PELT metrics, with a grounds-up load-balancing
algorithm.
As such it's not really an iterative series, but replaces the old
load-balancing logic with the new one. We hope there are no
performance regressions left - but statistically it's highly probable
that there *is* going to be some workload that is hurting from these
chnages. If so then we'd prefer to have a look at that workload and
fix its scheduling, instead of reverting the changes"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits)
rackmeter: Use vtime aware kcpustat accessor
leds: Use all-in-one vtime aware kcpustat accessor
cpufreq: Use vtime aware kcpustat accessors for user time
procfs: Use all-in-one vtime aware kcpustat accessor
sched/vtime: Bring up complete kcpustat accessor
sched/cputime: Support other fields on kcpustat_field()
sched/cpufreq: Move the cfs_rq_util_change() call to cpufreq_update_util()
sched/fair: Add comments for group_type and balancing at SD_NUMA level
sched/fair: Fix rework of find_idlest_group()
sched/uclamp: Fix overzealous type replacement
sched/Kconfig: Fix spelling mistake in user-visible help text
sched/core: Further clarify sched_class::set_next_task()
sched/fair: Use mul_u32_u32()
sched/core: Simplify sched_class::pick_next_task()
sched/core: Optimize pick_next_task()
sched/core: Make pick_next_task_idle() more consistent
sched/fair: Better document newidle_balance()
leds: Use vtime aware kcpustat accessor to fetch CPUTIME_SYSTEM
cpufreq: Use vtime aware kcpustat accessor to fetch CPUTIME_SYSTEM
procfs: Use vtime aware kcpustat accessor to fetch CPUTIME_SYSTEM
...
- Atomics-related code sees some rework & cleanup, most notably allowing
Loongson LL/SC errata workarounds to be more bulletproof & their
correctness to be checked at build time.
- Command line setup code is simplified somewhat, resolving various
corner cases.
- MIPS kernels can now be built with kcov code coverage support.
- We can now build with CONFIG_FORTIFY_SOURCE=y.
- Miscellaneous cleanups.
And some platform specific changes:
- We now disable some broken TLB functionality on certain Ingenic
systems, and JZ4780 systems gain some devicetree nodes to support
more devices.
- Loongson support sees a number of cleanups, and we gain initial
support for Loongson 3A R4 systems.
- We gain support for MediaTek MT7688-based GARDENA Smart Gateway
systems.
- SGI IP27 (Origin 2*) see a number of fixes, cleanups &
simplifications.
- SGI IP30 (Octane) systems are now supported.
-----BEGIN PGP SIGNATURE-----
iIwEABYIADQWIQRgLjeFAZEXQzy86/s+p5+stXUA3QUCXdwj2RYccGF1bGJ1cnRv
bkBrZXJuZWwub3JnAAoJED6nn6y1dQDd54QA/2CrWLcWCcWVwN8XwLTh3gWf8/k7
d19Ttd0bYrsBUnaHAP9s9kc9RFOAhB3p1G0dsMZqI0YX7emLGPgW3ejJ7CXNCg==
=/Hsa
-----END PGP SIGNATURE-----
Merge tag 'mips_5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Paul Burton:
"The main MIPS changes for 5.5:
- Atomics-related code sees some rework & cleanup, most notably
allowing Loongson LL/SC errata workarounds to be more bulletproof &
their correctness to be checked at build time.
- Command line setup code is simplified somewhat, resolving various
corner cases.
- MIPS kernels can now be built with kcov code coverage support.
- We can now build with CONFIG_FORTIFY_SOURCE=y.
- Miscellaneous cleanups.
And some platform specific changes:
- We now disable some broken TLB functionality on certain Ingenic
systems, and JZ4780 systems gain some devicetree nodes to support
more devices.
- Loongson support sees a number of cleanups, and we gain initial
support for Loongson 3A R4 systems.
- We gain support for MediaTek MT7688-based GARDENA Smart Gateway
systems.
- SGI IP27 (Origin 2*) see a number of fixes, cleanups &
simplifications.
- SGI IP30 (Octane) systems are now supported"
* tag 'mips_5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (107 commits)
MIPS: SGI-IP27: Enable ethernet phy on second Origin 200 module
MIPS: PCI: Fix fake subdevice ID for IOC3
MIPS: Ingenic: Disable abandoned HPTLB function.
MIPS: PCI: remember nasid changed by set interrupt affinity
MIPS: SGI-IP27: Fix crash, when CPUs are disabled via nr_cpus parameter
mips: add support for folded p4d page tables
mips: drop __pXd_offset() macros that duplicate pXd_index() ones
mips: fix build when "48 bits virtual memory" is enabled
MIPS: math-emu: Reuse name array in debugfs_fpuemu()
MIPS: allow building with kcov coverage
MIPS: Loongson64: Drop setup_pcimap
MIPS: Loongson2ef: Convert to early_printk_8250
MIPS: Drop CPU_SUPPORTS_UNCACHED_ACCELERATED
MIPS: Loongson{2ef, 32, 64} convert to generic fw cmdline
MIPS: Drop pmon.h
MIPS: Loongson: Unify LOONGSON3/LOONGSON64 Kconfig usage
MIPS: Loongson: Rename LOONGSON1 to LOONGSON32
MIPS: Loongson: Fix return value of loongson_hwmon_init
MIPS: add support for SGI Octane (IP30)
MIPS: PCI: make phys_to_dma/dma_to_phys for pci-xtalk-bridge common
...
We can now safely read user and guest kcpustat fields on nohz_full CPUs.
Use the appropriate accessors.
Reported-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wanpeng Li <wanpengli@tencent.com>
Link: https://lkml.kernel.org/r/20191121024430.19938-5-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The cpufreq core heavily depends on the availability of the struct
device for CPUs and if they aren't available at the time cpufreq driver
is registered, we will never succeed in making cpufreq work.
This happens due to following sequence of events:
- cpufreq_register_driver()
- subsys_interface_register()
- return 0; //successful registration of driver
... at a later point of time
- register_cpu();
- device_register();
- bus_probe_device();
- sif->add_dev();
- cpufreq_add_dev();
- get_cpu_device(); //FAILS
- per_cpu(cpu_sys_devices, num) = &cpu->dev; //used by get_cpu_device()
- return 0; //CPU registered successfully
Because the per-cpu variable cpu_sys_devices is set only after the CPU
device is regsitered, cpufreq will never be able to get it when
cpufreq_add_dev() is called.
This patch avoids this failure by making sure device structure of at
least CPU0 is available when the cpufreq driver is registered, else
return -EPROBE_DEFER.
Reported-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Co-developed-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull ARM cpufreq drivers updates for v5.5 from Viresh Kumar:
"This pull request contains:
- Updates to ti-cpufreq driver and DT files to support new platforms
and migrate from opp-v1 bindings to opp-v2 bindings (H. Nikolaus
Schaller and Adam Ford).
- Merging of arm_big_little and vexpress-spc drivers and related
cleanup (Sudeep Holla).
- Fix for imx's default speed grade value (Anson Huang).
- Minor cleanup patch for s3c64xx (Nathan Chancellor).
- Fix CPU speed bin detection for sun50i (Ondrej Jirman)."
* 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: sun50i: Fix CPU speed bin detection
cpufreq: vexpress-spc: find and skip duplicates when merging frequencies
cpufreq: vexpress-spc: use macros instead of hardcoded values for cluster ids
cpufreq: s3c64xx: Remove pointless NULL check in s3c64xx_cpufreq_driver_init
cpufreq: imx-cpufreq-dt: Correct i.MX8MN's default speed grade value
cpufreq: vexpress-spc: fix some coding style issues
cpufreq: vexpress-spc: remove lots of debug messages
cpufreq: vexpress-spc: drop unnessary cpufreq_arm_bL_ops abstraction
cpufreq: merge arm_big_little and vexpress-spc
cpufreq: scpi: remove stale/outdated comment about the driver
ARM: dts: Add OPP-V2 table for AM3517
cpufreq: ti-cpufreq: Add support for AM3517
ARM: dts: omap36xx: using OPP1G needs to control the abb_ldo
cpufreq: ti-cpufreq: omap36xx use "cpu0","vbb" if run in multi_regulator mode
ARM: dts: omap3: bulk convert compatible to be explicitly ti,omap3430 or ti,omap3630 or ti,am3517
DTS: bindings: omap: update bindings documentation
ARM: dts: omap34xx & omap36xx: replace opp-v1 tables by opp-v2 for
cpufreq: ti-cpufreq: add support for omap34xx and omap36xx
Add NULL checks to show() and store() in cpufreq.c to avoid attempts
to invoke a NULL callback.
Though some interfaces of cpufreq are set as read-only, users can
still get write permission using chmod which can lead to a kernel
crash, as follows:
chmod +w /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq
echo 1 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq
This bug was found in linux 4.19.
Signed-off-by: Kai Shen <shenkai8@huawei.com>
Reported-by: Feilong Lin <linfeilong@huawei.com>
Reviewed-by: Feilong Lin <linfeilong@huawei.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
[ rjw: Subject & changelog ]
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The max value of EPB can only be 0x0F. Attempting to set more than that
triggers an "unchecked MSR access error" warning which happens in
intel_pstate_hwp_force_min_perf() called via cpufreq stop_cpu().
However, it is not even necessary to touch the EPB from intel_pstate,
because it is restored on every CPU online by the intel_epb.c code,
so let that code do the right thing and drop the redundant (and
incorrect) EPB update from intel_pstate.
Fixes: af3b7379e2 ("cpufreq: intel_pstate: Force HWP min perf before offline")
Reported-by: Qian Cai <cai@lca.pw>
Cc: 5.2+ <stable@vger.kernel.org> # 5.2+
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
[ rjw: Changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Allow qcom-hw driver to initialize right after the cpufreq and thermal
subsystems are initialised in core_initcall so we get earlier access to
thermal mitigation.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Taniya Das <tdas@codeaurora.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/eacce8d08388b0bdfc908d2701fe7c2b78d90441.1571656015.git.amit.kucheria@linaro.org
Initialize the cpufreq governors earlier to allow for earlier
performance control during the boot process.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/b98eae9b44eb2f034d7f5d12a161f5f831be1eb7.1571656015.git.amit.kucheria@linaro.org
Fix sparse warning: Using plain integer as NULL pointer.
Replace assignment of 0 to pointers with NULL assignment.
Signed-off-by: Jamal Shareef <jamal.k.shareef@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
I have observed failures to boot on Orange Pi 3, because this driver
determined that my SoC is from the normal bin, but my SoC only works
reliably with the OPP values for the slowest bin.
By querying H6 owners, it was found that e-fuse values found in the wild
are in the range of 1-3, value of 7 was not reported, yet. From this and
from unused defines in BSP code, it can be assumed that meaning of efuse
values on H6 actually is:
- 1 = slowest bin
- 2 = normal bin
- 3 = fastest bin
Vendor code actually treats 0 and 2 as invalid efuse values, but later
treats all invalid values as a normal bin. This looks like a mistake in
bin detection code, that was plastered over by a hack in cpufreq code,
so let's not repeat it here. It probably only works because there are no
SoCs in the wild with efuse value of 0, and fast bin SoCs are made to
use normal bin OPP tables, which is also safe.
Let's play it safe and interpret 0 as the slowest bin, but fix detection
of other bins to match this research. More research will be done before
actual OPP tables are merged.
Fixes: f328584f7b ("cpufreq: Add sun50i nvmem based CPU scaling driver")
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Ondrej Jirman <megous@megous.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The following build warning occurred on powerpc 64-bit builds:
drivers/cpufreq/powernv-cpufreq.c: In function 'init_chip_info':
drivers/cpufreq/powernv-cpufreq.c:1070:1: warning: the frame size of
1040 bytes is larger than 1024 bytes [-Wframe-larger-than=]
This is with a cross-compiler based on gcc 8.1.0, which I got from:
https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/8.1.0/
The warning is due to putting 1024 bytes on the stack:
unsigned int chip[256];
...and it's also undesirable to have a hard limit on the number of
CPUs here.
Fix both problems by dynamically allocating based on num_possible_cpus,
as recommended by Michael Ellerman.
Fixes: 053819e0bf ("cpufreq: powernv: Handle throttling due to Pmax capping at chip level")
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: 4.10+ <stable@vger.kernel.org> # 4.10+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
One of the responsibility of the ->verify() callback is to make sure
that the policy's min frequency is <= max frequency as this isn't
guaranteed by the QoS framework which gave us those values.
Update the comment in cpufreq_set_policy() to clarify that.
Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
[ rjw: Minor changes of the new comment ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
As later model of GSx64 family processors including 2-series-soc have
similar design with initial loongson3a while loongson2e/f seems less
identical, we separate loongson2e/f support code out of mach-loongson64
to make our life easier.
This patch contains mostly file moving works.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
[paulburton@kernel.org: Squash in the MAINTAINERS updates]
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: paul.burton@mips.com
This patch adds suspend and resume pm ops for cpufreq driver.
PLLP is the safe clock source for CPU during system suspend and
resume as PLLP rate is below the CPU Fmax at Vmin.
CPUFreq driver suspend switches the CPU clock source to PLLP and
disables the DFLL clock.
During system resume, warmboot code powers up the CPU with PLLP
clock source. So CPUFreq driver resume enabled DFLL clock and
switches CPU back to DFLL clock source.
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Now that we have a vtime safe kcpustat accessor for CPUTIME_SYSTEM, use
it to start fixing frozen kcpustat values on nohz_full CPUs.
Reported-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J . Wysocki <rjw@rjwysocki.net>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wanpeng Li <wanpengli@tencent.com>
Link: https://lkml.kernel.org/r/20191016025700.31277-14-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently the cpufreq core aborts the validation and return error
immediately when it encounter duplicate frequency table entries.
This change was introduced long back since commit da0c6dc00c
("cpufreq: Handle sorted frequency tables more efficiently").
However, this missed the testing with modified firmware for long time.
Inorder to make it work with default settings, we need to ensure the
merged table for bL switcher contains no duplicates. Find the duplicates
and skip them when merging the frequenct tables of A15 and A7 clusters.
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
A15 and A7 cluster identifiers are fixed to 0 and 1 respectively. There are
macros for the same and used in most of the places except this instance.
Lets use macros instead of hardcoded values for cluster ids even here.
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
When building with Clang + -Wtautological-pointer-compare:
drivers/cpufreq/s3c64xx-cpufreq.c:152:6: warning: comparison of array
's3c64xx_freq_table' equal to a null pointer is always false
[-Wtautological-pointer-compare]
if (s3c64xx_freq_table == NULL) {
^~~~~~~~~~~~~~~~~~ ~~~~
1 warning generated.
The definition of s3c64xx_freq_table is surrounded by an ifdef
directive for CONFIG_CPU_S3C6410, which is always true for this driver
because it depends on it in drivers/cpufreq/Kconfig.arm (and if it
weren't, there would be a build error because s3c64xx_freq_table would
not be a defined symbol).
Resolve this warning by removing the unnecessary NULL check because it
is always false as Clang notes. While we are at it, remove the
unnecessary ifdef conditional because it is always true.
Fixes: b3748ddd80 ("[ARM] S3C64XX: Initial support for DVFS")
Link: https://github.com/ClangBuiltLinux/linux/issues/748
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Scheduled policy update work may end up racing with the freeing of the
policy and unregistering the driver.
One possible race is as below, where the cpufreq_driver is unregistered,
but the scheduled work gets executed at later stage when, cpufreq_driver
is NULL (i.e. after freeing the policy and driver).
Unable to handle kernel NULL pointer dereference at virtual address 0000001c
pgd = (ptrval)
[0000001c] *pgd=80000080204003, *pmd=00000000
Internal error: Oops: 206 [#1] SMP THUMB2
Modules linked in:
CPU: 0 PID: 34 Comm: kworker/0:1 Not tainted 5.4.0-rc3-00006-g67f5a8081a4b #86
Hardware name: ARM-Versatile Express
Workqueue: events handle_update
PC is at cpufreq_set_policy+0x58/0x228
LR is at dev_pm_qos_read_value+0x77/0xac
Control: 70c5387d Table: 80203000 DAC: fffffffd
Process kworker/0:1 (pid: 34, stack limit = 0x(ptrval))
(cpufreq_set_policy) from (refresh_frequency_limits.part.24+0x37/0x48)
(refresh_frequency_limits.part.24) from (handle_update+0x2f/0x38)
(handle_update) from (process_one_work+0x16d/0x3cc)
(process_one_work) from (worker_thread+0xff/0x414)
(worker_thread) from (kthread+0xff/0x100)
(kthread) from (ret_from_fork+0x11/0x28)
Fixes: 67d874c3b2 ("cpufreq: Register notifiers with the PM QoS framework")
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
[ rjw: Cancel the work before dropping the QoS requests ]
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
i.MX8MN has different speed grade definition compared to
i.MX8MQ/i.MX8MM, when fuses are NOT written, the default
speed_grade should be set to minimum available OPP defined
in DT which is 1.2GHz, the corresponding speed_grade value
should be 0xb.
Fixes: 5b8010ba70 ("cpufreq: imx-cpufreq-dt: Add i.MX8MN support")
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Fix the following checkpatch checks/warnings:
CHECK: Unnecessary parentheses around the code
CHECK: Alignment should match open parenthesis
CHECK: Prefer kernel type 'u32' over 'uint32_t'
WARNING: Missing a blank line after declarations
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
This driver have been used and tested for year now and the extensive
debug/log messages in the driver are not really required anymore.
Get rid of those unnecessary log messages.
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
cpufreq_arm_bL_ops is no longer needed after merging the generic
arm_big_little and vexpress-spc driver. Remove it along with the
unused bL_cpufreq_{,un}register routines and rename some bL_*
functions to ve_spc_*.
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
arm_big_little cpufreq driver was designed as a generic big little
driver that could be used by any platform and make use of bL switcher.
Over years alternate solutions have been designed and merged to deal
with bL/HMP systems like EAS.
Also since no other driver made use of generic arm_big_little cpufreq
driver except Vexpress SPC, we can merge them together as vexpress-spc
driver used only on Vexpress TC2(CA15_CA7) platform.
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Commit 343a8d17fa ("cpufreq: scpi: remove arm_big_little dependency")
removed the arm_big_little dependency from scpi driver and doesn't
provide any ops to arm_big_little cpufreq driver. Lets remove that
stale comment.
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Replace the CPU device PM QoS used for the management of min and max
frequency constraints in cpufreq (and its users) with per-policy
frequency QoS to avoid problems with cpufreq policies covering
more then one CPU.
Namely, a cpufreq driver is registered with the subsys interface
which calls cpufreq_add_dev() for each CPU, starting from CPU0, so
currently the PM QoS notifiers are added to the first CPU in the
policy (i.e. CPU0 in the majority of cases).
In turn, when the cpufreq driver is unregistered, the subsys interface
doing that calls cpufreq_remove_dev() for each CPU, starting from CPU0,
and the PM QoS notifiers are only removed when cpufreq_remove_dev() is
called for the last CPU in the policy, say CPUx, which as a rule is
not CPU0 if the policy covers more than one CPU. Then, the PM QoS
notifiers cannot be removed, because CPUx does not have them, and
they are still there in the device PM QoS notifiers list of CPU0,
which prevents new PM QoS notifiers from being registered for CPU0
on the next attempt to register the cpufreq driver.
The same issue occurs when the first CPU in the policy goes offline
before unregistering the driver.
After this change it does not matter which CPU is the policy CPU at
the driver registration time and whether or not it is online all the
time, because the frequency QoS is per policy and not per CPU.
Fixes: 67d874c3b2 ("cpufreq: Register notifiers with the PM QoS framework")
Reported-by: Dmitry Osipenko <digetx@gmail.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Reported-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Diagnosed-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/linux-pm/5ad2624194baa2f53acc1f1e627eb7684c577a19.1562210705.git.viresh.kumar@linaro.org/T/#md2d89e95906b8c91c15f582146173dce2e86e99f
Link: https://lore.kernel.org/linux-pm/20191017094612.6tbkwoq4harsjcqv@vireshk-i7/T/#m30d48cc23b9a80467fbaa16e30f90b3828a5a29b
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
The AM3517 only lists 600MHz @ 1.2V, but the register values for
0x4830A204 = 1b86 802f, it seems like am3517 might be a derivative
of the omap36 which OPPs would be OPP50 (300 MHz) and OPP100
(600 MHz).
This patch simply adds the am3517 to the compatible table
similar to a mix of the omap3430 and omap3430 structure.
Signed-off-by: Adam Ford <aford173@gmail.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Tested-by: Adam Ford <aford173@gmail.com>
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
See DM3730,DM275 data sheet (SPRS685B) footnote (6) in Table 4-19
which says that ABB must be switched to FBB mode when using the
OPP1G.
The LOD definition abb_mpu_iva already exists so that we need
to add plumbing for vbb-supply = <&abb_mpu_iva>
and define two voltage vectors for each OPP so that the abb LDO
is also updated by the ti-cpufreq driver.
We also must switch the ti_cpufreq_soc_data to multi_regulator.
Note: reading out the abb reglator voltage to verify that
it does do transitions can be done by
cat /sys/devices/platform/68000000.ocp/483072f0.regulator-abb-mpu/regulator/regulator.*/microvolts
Likewise, read the twl4030 provided VDD voltage by
cat /sys/devices/platform/68000000.ocp/48070000.i2c/i2c-0/0-0048/48070000.i2c:twl@48:regulator-vdd1/regulator/regulator.*/microvolts
Note: to check if the ABB FBB is enabled/disabled, check
registers
PRM_LDO_ABB_CTRL 0x483072F4 bit 3:0 1=bypass 5=FBB
PRM_LDO_ABB_SETUP 0x483072F0 0x00=bypass 0x11=FBB
e.g.
/dev/mem opened.
Memory mapped at address 0xb6fe4000.
Value at address 0x483072F4 (0xb6fe42f4): 0x3205
/dev/mem opened.
Memory mapped at address 0xb6f89000.
Value at address 0x483072F4 (0xb6f892f4): 0x3201
Note: omap34xx and am3517 have/need no comparable LDO
or mechanism.
Suggested-by: Adam Ford <aford173@gmail.com>
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Tested-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
In preparation for using the multi_regulator capability of
this driver for handling the ABB LDO for OPP1G of the omap36xx
we have to take care that the (legacy) vdd-supply name is
cpu0-supply = <&vcc>;
To do this we add another field to the SoC description table which
optionally can specify a list of regulator names.
For omap36xx we define "cpu0-supply" and "vbb-supply".
The default remains "vdd-supply" and "vbb-supply".
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Rob Herring <robh@kernel.org>
Tested-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
With the driver installed, we can change the opp-v1 table format
to opp-v2.
In addition, move omap3 from whitelist to blacklist in cpufreq-dt-platdev
in the same patch, because doing either first breaks operation and
may make trouble in bisect.
We also can remove opp-v1 table for omap3-n950-n9 since its 1GHz
capability is now automatically detected.
We also fix a wrong OPP4 voltage for omap3430 which must be
0.6V + 54*12.5mV = 1275mV. Otherwise the twl4030 driver will reject
this OPP.
Note: the high speed OPPs that were not available in the opp-v1 tables
are tagged "turbo-mode;" which means they are not automatically
activated by the govenors or cpu-freq.
To enable you have to write
echo 1 >/sys/devices/system/cpu/cpufreq/boost
Note: to hard disable an OPP in a board.dts file use e.g.
&cpu0_opp_table: {
/delete-node/ opp1g-1000000000; /* do not use */
};
or alternatively:
&cpu0_opp_table: {
opp1g-1000000000 {
status = "disabled"; /* do not use */
};
};
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Tested-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
This adds code and tables to read the silicon revision and
eFuse (speed binned / 720 MHz grade) bits for selecting
opp-v2 table entries.
Since these bits are not always part of the syscon register
range (like for am33xx, am43, dra7), we add code to directly
read the register values using ioremap() if syscon access fails.
The format of the opp-supported-hw entries is that it has
two 32 bit bitfields. E.g.:
opp-supported-hw = <0xffffffff 3>
The first value is matched against the bit position of the
silicon revision which is (see TRM)
omap34xx:
BIT(0) ES1.0
BIT(1) ES2.0
BIT(2) ES2.1
BIT(3) ES3.0
BIT(4) ES3.1
BIT(7) ES3.1.2
omap36xx:
BIT(0) ES1.0
BIT(1) ES1.1
BIT(2) ES1.2
The second value is matched against the speed grade eFuse:
BIT(0) no high speed OPP
BIT(1) high speed OPP
This means for the example above that it is always enabled
while e.g.
opp-supported-hw = <0x1 2>
enables the OPP only for ES1.0 BIT(0) and if the high speed
eFuse is set BIT(1).
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Tested-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
It is incorrect to set the cpufreq syscore shutdown callback pointer
to cpufreq_suspend(), because that function cannot be run in the
syscore stage of system shutdown for two reasons: (a) it may attempt
to carry out actions depending on devices that have already been shut
down at that point and (b) the RCU synchronization carried out by it
may not be able to make progress then.
The latter issue has been present since commit 45975c7d21 ("rcu:
Define RCU-sched API in terms of RCU for Tree RCU PREEMPT builds"),
but the former one has been there since commit 90de2a4aa9 ("cpufreq:
suspend cpufreq governors on shutdown") regardless.
Fix that by dropping cpufreq_syscore_ops altogether and making
device_shutdown() call cpufreq_suspend() directly before shutting
down devices, which is along the lines of what system-wide power
management does.
Fixes: 45975c7d21 ("rcu: Define RCU-sched API in terms of RCU for Tree RCU PREEMPT builds")
Fixes: 90de2a4aa9 ("cpufreq: suspend cpufreq governors on shutdown")
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: 4.0+ <stable@vger.kernel.org> # 4.0+
- Rework the main suspend-to-idle control flow to avoid repeating
"noirq" device resume and suspend operations in case of spurious
wakeups from the ACPI EC and decouple the ACPI EC wakeups support
from the LPS0 _DSM support (Rafael Wysocki).
- Extend the wakeup sources framework to expose wakeup sources as
device objects in sysfs (Tri Vo, Stephen Boyd).
- Expose system suspend statistics in sysfs (Kalesh Singh).
- Introduce a new haltpoll cpuidle driver and a new matching
governor for virtualized guests wanting to do guest-side polling
in the idle loop (Marcelo Tosatti, Joao Martins, Wanpeng Li,
Stephen Rothwell).
- Fix the menu and teo cpuidle governors to allow the scheduler tick
to be stopped if PM QoS is used to limit the CPU idle state exit
latency in some cases (Rafael Wysocki).
- Increase the resolution of the play_idle() argument to microseconds
for more fine-grained injection of CPU idle cycles (Daniel Lezcano).
- Switch over some users of cpuidle notifiers to the new QoS-based
frequency limits and drop the CPUFREQ_ADJUST and CPUFREQ_NOTIFY
policy notifier events (Viresh Kumar).
- Add new cpufreq driver based on nvmem for sun50i (Yangtao Li).
- Add support for MT8183 and MT8516 to the mediatek cpufreq driver
(Andrew-sh.Cheng, Fabien Parent).
- Add i.MX8MN support to the imx-cpufreq-dt cpufreq driver (Anson
Huang).
- Add qcs404 to cpufreq-dt-platdev blacklist (Jorge Ramirez-Ortiz).
- Update the qcom cpufreq driver (among other things, to make it
easier to extend and to use kryo cpufreq for other nvmem-based
SoCs) and add qcs404 support to it (Niklas Cassel, Douglas
RAILLARD, Sibi Sankar, Sricharan R).
- Fix assorted issues and make assorted minor improvements in the
cpufreq code (Colin Ian King, Douglas RAILLARD, Florian Fainelli,
Gustavo Silva, Hariprasad Kelam).
- Add new devfreq driver for NVidia Tegra20 (Dmitry Osipenko, Arnd
Bergmann).
- Add new Exynos PPMU events to devfreq events and extend that
mechanism (Lukasz Luba).
- Fix and clean up the exynos-bus devfreq driver (Kamil Konieczny).
- Improve devfreq documentation and governor code, fix spelling
typos in devfreq (Ezequiel Garcia, Krzysztof Kozlowski, Leonard
Crestez, MyungJoo Ham, Gaël PORTAY).
- Add regulators enable and disable to the OPP (operating performance
points) framework (Kamil Konieczny).
- Update the OPP framework to support multiple opp-suspend properties
(Anson Huang).
- Fix assorted issues and make assorted minor improvements in the OPP
code (Niklas Cassel, Viresh Kumar, Yue Hu).
- Clean up the generic power domains (genpd) framework (Ulf Hansson).
- Clean up assorted pieces of power management code and documentation
(Akinobu Mita, Amit Kucheria, Chuhong Yuan).
- Update the pm-graph tool to version 5.5 including multiple fixes
and improvements (Todd Brandt).
- Update the cpupower utility (Benjamin Weis, Geert Uytterhoeven,
Sébastien Szymanski).
-----BEGIN PGP SIGNATURE-----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=TBDQ
-----END PGP SIGNATURE-----
Merge tag 'pm-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These include a rework of the main suspend-to-idle code flow (related
to the handling of spurious wakeups), a switch over of several users
of cpufreq notifiers to QoS-based limits, a new devfreq driver for
Tegra20, a new cpuidle driver and governor for virtualized guests, an
extension of the wakeup sources framework to expose wakeup sources as
device objects in sysfs, and more.
Specifics:
- Rework the main suspend-to-idle control flow to avoid repeating
"noirq" device resume and suspend operations in case of spurious
wakeups from the ACPI EC and decouple the ACPI EC wakeups support
from the LPS0 _DSM support (Rafael Wysocki).
- Extend the wakeup sources framework to expose wakeup sources as
device objects in sysfs (Tri Vo, Stephen Boyd).
- Expose system suspend statistics in sysfs (Kalesh Singh).
- Introduce a new haltpoll cpuidle driver and a new matching governor
for virtualized guests wanting to do guest-side polling in the idle
loop (Marcelo Tosatti, Joao Martins, Wanpeng Li, Stephen Rothwell).
- Fix the menu and teo cpuidle governors to allow the scheduler tick
to be stopped if PM QoS is used to limit the CPU idle state exit
latency in some cases (Rafael Wysocki).
- Increase the resolution of the play_idle() argument to microseconds
for more fine-grained injection of CPU idle cycles (Daniel
Lezcano).
- Switch over some users of cpuidle notifiers to the new QoS-based
frequency limits and drop the CPUFREQ_ADJUST and CPUFREQ_NOTIFY
policy notifier events (Viresh Kumar).
- Add new cpufreq driver based on nvmem for sun50i (Yangtao Li).
- Add support for MT8183 and MT8516 to the mediatek cpufreq driver
(Andrew-sh.Cheng, Fabien Parent).
- Add i.MX8MN support to the imx-cpufreq-dt cpufreq driver (Anson
Huang).
- Add qcs404 to cpufreq-dt-platdev blacklist (Jorge Ramirez-Ortiz).
- Update the qcom cpufreq driver (among other things, to make it
easier to extend and to use kryo cpufreq for other nvmem-based
SoCs) and add qcs404 support to it (Niklas Cassel, Douglas
RAILLARD, Sibi Sankar, Sricharan R).
- Fix assorted issues and make assorted minor improvements in the
cpufreq code (Colin Ian King, Douglas RAILLARD, Florian Fainelli,
Gustavo Silva, Hariprasad Kelam).
- Add new devfreq driver for NVidia Tegra20 (Dmitry Osipenko, Arnd
Bergmann).
- Add new Exynos PPMU events to devfreq events and extend that
mechanism (Lukasz Luba).
- Fix and clean up the exynos-bus devfreq driver (Kamil Konieczny).
- Improve devfreq documentation and governor code, fix spelling typos
in devfreq (Ezequiel Garcia, Krzysztof Kozlowski, Leonard Crestez,
MyungJoo Ham, Gaël PORTAY).
- Add regulators enable and disable to the OPP (operating performance
points) framework (Kamil Konieczny).
- Update the OPP framework to support multiple opp-suspend properties
(Anson Huang).
- Fix assorted issues and make assorted minor improvements in the OPP
code (Niklas Cassel, Viresh Kumar, Yue Hu).
- Clean up the generic power domains (genpd) framework (Ulf Hansson).
- Clean up assorted pieces of power management code and documentation
(Akinobu Mita, Amit Kucheria, Chuhong Yuan).
- Update the pm-graph tool to version 5.5 including multiple fixes
and improvements (Todd Brandt).
- Update the cpupower utility (Benjamin Weis, Geert Uytterhoeven,
Sébastien Szymanski)"
* tag 'pm-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (126 commits)
cpuidle-haltpoll: Enable kvm guest polling when dedicated physical CPUs are available
cpuidle-haltpoll: do not set an owner to allow modunload
cpuidle-haltpoll: return -ENODEV on modinit failure
cpuidle-haltpoll: set haltpoll as preferred governor
cpuidle: allow governor switch on cpuidle_register_driver()
PM: runtime: Documentation: add runtime_status ABI document
pm-graph: make setVal unbuffered again for python2 and python3
powercap: idle_inject: Use higher resolution for idle injection
cpuidle: play_idle: Increase the resolution to usec
cpuidle-haltpoll: vcpu hotplug support
cpufreq: Add qcs404 to cpufreq-dt-platdev blacklist
cpufreq: qcom: Add support for qcs404 on nvmem driver
cpufreq: qcom: Refactor the driver to make it easier to extend
cpufreq: qcom: Re-organise kryo cpufreq to use it for other nvmem based qcom socs
dt-bindings: opp: Add qcom-opp bindings with properties needed for CPR
dt-bindings: opp: qcom-nvmem: Support pstates provided by a power domain
Documentation: cpufreq: Update policy notifier documentation
cpufreq: Remove CPUFREQ_ADJUST and CPUFREQ_NOTIFY policy notifier events
PM / Domains: Verify PM domain type in dev_pm_genpd_set_performance_state()
PM / Domains: Simplify genpd_lookup_dev()
...
Pull ARM cpufreq driver changes for 5.4 from Viresh Kumar:
"This contains:
- Minor fixes for mediatek driver (Andrew-sh.Cheng and Fabien Parent).
- Minor updates for imx driver (Anson Huang).
- Minor fix for ti-cpufreq driver (Gustavo A. R. Silva).
- Minor fix for ap806 driver (Hariprasad Kelam).
- Significant updates to qcom cpufreq drivers, mostly to support CPR
stuff (Jorge Ramirez-Ortiz, Niklas Cassel, Sibi Sankar, Douglas
RAILLARD and Sricharan R).
- New sun50i cpufreq driver (Yangtao Li).
It also contains a few OPP changes which were required because of
dependencies for the qcom cpufreq changes."
* 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: (22 commits)
cpufreq: Add qcs404 to cpufreq-dt-platdev blacklist
cpufreq: qcom: Add support for qcs404 on nvmem driver
cpufreq: qcom: Refactor the driver to make it easier to extend
cpufreq: qcom: Re-organise kryo cpufreq to use it for other nvmem based qcom socs
dt-bindings: opp: Add qcom-opp bindings with properties needed for CPR
dt-bindings: opp: qcom-nvmem: Support pstates provided by a power domain
cpufreq: mediatek: Add support for mt8183
cpufreq: mediatek: change to regulator_get_optional
cpufreq: imx-cpufreq-dt: Add i.MX8MN support
cpufreq: Use imx-cpufreq-dt for i.MX8MN's speed grading
cpufreq: qcom-hw: invoke frequency-invariance setter function
cpufreq: qcom-hw: Update logic to detect turbo frequency
cpufreq: mediatek-cpufreq: Add compatible for MT8516
cpufreq: ti-cpufreq: Mark expected switch fall-through
dt-bindings: opp: qcom-nvmem: Make speedbin related properties optional
dt-bindings: opp: Re-organise kryo cpufreq to use it for other nvmem based qcom socs
opp: Add dev_pm_opp_find_level_exact()
opp: Return genpd virtual devices from dev_pm_opp_attach_genpd()
opp: Not all power-domains are scalable
cpufreq: ap806: Add NULL check after kcalloc
...
Add support for qcs404 on nvmem driver.
The qcs404 SoC has support for Core Power Reduction (CPR), which is
implemented as a power domain provider, therefore add optional support
in this driver to attach to a genpd power domain.
Co-developed-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Refactor the driver to make it easier to extend in a later commit.
Create a driver struct to collect all common resources, in order to make
it easier to free up all common resources.
Create a driver match_data struct to make it easier to extend the driver
with support for new features that might only be supported on certain SoCs.
Co-developed-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
Reviewed-by: Ilia Lin <ilia.lin@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The kryo cpufreq driver reads the nvmem cell and uses that data to
populate the opps. There are other qcom cpufreq socs like krait which
does similar thing. Except for the interpretation of the read data,
rest of the driver is same for both the cases. So pull the common things
out for reuse.
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
[niklas.cassel@linaro.org: split dt-binding into a separate patch and
do not rename the compatible string. Update MAINTAINERS file.]
Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
Reviewed-by: Ilia Lin <ilia.lin@kernel.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
No driver makes reference to these events now, remove them and the code
related to them.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Currently big microservers have _XEON_D while small microservers have
_X, Make it uniformly: _D.
for i in `git grep -l "\(INTEL_FAM6_\|VULNWL_INTEL\|INTEL_CPU_FAM6\).*_\(X\|XEON_D\)"`
do
sed -i -e 's/\(\(INTEL_FAM6_\|VULNWL_INTEL\|INTEL_CPU_FAM6\).*ATOM.*\)_X/\1_D/g' \
-e 's/\(\(INTEL_FAM6_\|VULNWL_INTEL\|INTEL_CPU_FAM6\).*\)_XEON_D/\1_D/g' ${i}
done
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Cc: x86@kernel.org
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Link: https://lkml.kernel.org/r/20190827195122.677152989@infradead.org
Currently big core clients with extra graphics on have:
- _G
- _GT3E
Make it uniformly: _G
for i in `git grep -l "\(INTEL_FAM6_\|VULNWL_INTEL\|INTEL_CPU_FAM6\).*_GT3E"`
do
sed -i -e 's/\(\(INTEL_FAM6_\|VULNWL_INTEL\|INTEL_CPU_FAM6\).*\)_GT3E/\1_G/g' ${i}
done
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Cc: x86@kernel.org
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Link: https://lkml.kernel.org/r/20190827195122.622802314@infradead.org
Currently big core mobile chips have either:
- _L
- _ULT
- _MOBILE
Make it uniformly: _L.
for i in `git grep -l "\(INTEL_FAM6_\|VULNWL_INTEL\|INTEL_CPU_FAM6\).*_\(MOBILE\|ULT\)"`
do
sed -i -e 's/\(\(INTEL_FAM6_\|VULNWL_INTEL\|INTEL_CPU_FAM6\).*\)_\(MOBILE\|ULT\)/\1_L/g' ${i}
done
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Cc: x86@kernel.org
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190827195122.568978530@infradead.org
Currently the big core client models either have:
- no OPTDIFF
- _CORE
- _DESKTOP
Make it uniformly: 'no OPTDIFF'.
for i in `git grep -l "\(INTEL_FAM6_\|VULNWL_INTEL\|INTEL_CPU_FAM6\).*_\(CORE\|DESKTOP\)"`
do
sed -i -e 's/\(\(INTEL_FAM6_\|VULNWL_INTEL\|INTEL_CPU_FAM6\).*\)_\(CORE\|DESKTOP\)/\1/g' ${i}
done
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Cc: x86@kernel.org
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190827195122.513945586@infradead.org
The cpufreq core now takes the min/max frequency constraints via QoS
requests and the CPUFREQ_ADJUST notifier shall get removed later on.
Switch over to using the QoS request for maximum frequency constraint
for ppc_cbe_cpufreq driver.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
[ rjw: Subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Instead of printing the policy, which is incidentally a kernel pointer,
so with limited interest, print the cpufreq driver name that failed to
be suspend, which is more useful for debugging.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
For new mediatek chip mt8183,
cci and little cluster share the same buck,
so need to modify the attribute of regulator from exclusive to optional
Signed-off-by: Andrew-sh.Cheng <andrew-sh.cheng@mediatek.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Add i.MX8MN to blacklist, so that imx-cpufreq-dt driver can handle
speed grading bits just like other i.MX8M SoCs.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Add calls to arch_set_freq_scale() in qcom-cpufreq-hw driver to enable
frequency invariance.
Signed-off-by: Douglas RAILLARD <douglas.raillard@arm.com>
Reviewed-by: Quentin Perret <quentin.perret@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The core count read back from the each domain's look up table serves
as an indicator for the onset of the turbo frequency and not accurate
representation of number of cores in a paticular domain. Update turbo
detection logic accordingly to add support for SM8150 SoCs.
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Intel pstate driver exposes min_perf_pct and max_perf_pct sysfs files,
which can be used to force a limit on the min/max P state of the driver.
Though these files eventually control the min/max frequencies that the
CPUs will run at, they don't make a change to policy->min/max values.
When the values of these files are changed (in passive mode of the
driver), it leads to calling ->limits() callback of the cpufreq
governors, like schedutil. On a call to it the governors shall
forcefully update the frequency to come within the limits. Since the
limits, i.e. policy->min/max, aren't updated by the driver, the
governors fails to get the target freq within limit and sometimes aborts
the update believing that the frequency is already set to the target
value.
This patch implements the QoS supported frequency constraints to update
policy->min/max values whenever min_perf_pct or max_perf_pct files are
updated. This is only done for the passive mode as of now, as the driver
is already working fine in active mode.
Fixes: ecd2884291 ("cpufreq: schedutil: Don't set next_freq to UINT_MAX")
Reported-by: Doug Smythies <dsmythies@telus.net>
Tested-by: Doug Smythies <dsmythies@telus.net>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Variable ret is initialized to a value that is never read and it is
re-assigned later. The initialization is redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This effectively reverts some changes made by commit f9f41e3ef9
("cpufreq: Remove policy create/remove notifiers").
We have a new use case for policy create/remove notifiers (for
allocating/freeing QoS requests per policy), so add them back.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
[ rjw: Subject & changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
dev_pm_qos_update_request() can return 1 on success, so don't treat
it as an error.
Fixes: 18c49926c4 ("cpufreq: Add QoS requests for userspace constraints")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add the compatible for MT8516 in order to take advantage of the
MediaTek CPUFreq driver for Mediatek's MT8516 SoC.
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Mark switch cases where we are expecting to fall through.
This patch fixes the following warning (Building: arm):
drivers/cpufreq/ti-cpufreq.c: In function ‘dra7_efuse_xlate’:
drivers/cpufreq/ti-cpufreq.c:79:20: warning: this statement may fall through [-Wimplicit-fallthrough=]
calculated_efuse |= DRA7_EFUSE_HIGH_MPU_OPP;
drivers/cpufreq/ti-cpufreq.c:80:2: note: here
case DRA7_EFUSE_HAS_OD_MPU_OPP:
^~~~
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The cpu variable is still being used in the of_get_property() call
after the of_node_put() call, which may result in use-after-free.
Fixes: a9acc26b75 ("cpufreq/pasemi: fix possible object reference leak")
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add NULL check after kcalloc.
Fix below issue reported by coccicheck
./drivers/cpufreq/armada-8k-cpufreq.c:138:1-12: alloc with no test,
possible model on line 151
Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
For some SoCs, the CPU frequency subset and voltage value of each OPP
varies based on the silicon variant in use. The sun50i-cpufreq-nvmem
driver reads the efuse value from the SoC to provide the OPP framework
with required information.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
* pm-cpufreq:
cpufreq: Make cpufreq_generic_init() return void
cpufreq: imx-cpufreq-dt: Add i.MX8MN support
cpufreq: Add QoS requests for userspace constraints
cpufreq: intel_pstate: Reuse refresh_frequency_limits()
cpufreq: Register notifiers with the PM QoS framework
PM / QoS: Add support for MIN/MAX frequency constraints
PM / QOS: Pass request type to dev_pm_qos_read_value()
PM / QOS: Rename __dev_pm_qos_read_value() and dev_pm_qos_raw_read_value()
PM / QOS: Pass request type to dev_pm_qos_{add|remove}_notifier()
It always returns 0 (success) and its return type should really be void.
Over that, many drivers have added error handling code based on its
return value, which is not required at all.
Change its return type to void and update all the callers.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
i.MX8MN is a new SoC of i.MX8M series, it also uses speed
grading and market segment fuses for OPP definitions, add
support for this SoC.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This implements QoS requests to manage userspace configuration of min
and max frequency.
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: syzbot <syzbot+de771ae9390dffed7266@syzkaller.appspotmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The implementation of intel_pstate_update_max_freq() is quite similar to
refresh_frequency_limits(), lets reuse it.
Finding minimum of policy->user_policy.max and policy->cpuinfo.max_freq
in intel_pstate_update_max_freq() is redundant as cpufreq_set_policy()
will call the ->verify() callback of intel-pstate driver, which will do
this comparison anyway and so dropping it from
intel_pstate_update_max_freq() doesn't harm.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Register notifiers for min/max frequency constraints with the PM QoS
framework. The constraints are also taken into consideration in
cpufreq_set_policy().
This also relocates cpufreq_policy_put_kobj() as it is required to be
called from cpufreq_policy_alloc() now.
refresh_frequency_limits() is updated to avoid calling
cpufreq_set_policy() for inactive policies and handle_update() is
updated to have proper locking in place.
No constraints are added until now though.
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* pm-cpufreq:
cpufreq: Avoid calling cpufreq_verify_current_freq() from handle_update()
cpufreq: Consolidate cpufreq_update_current_freq() and __cpufreq_get()
cpufreq: Don't skip frequency validation for has_target() drivers
cpufreq: Use has_target() instead of !setpolicy
cpufreq: Remove redundant !setpolicy check
cpufreq: Move the IS_ENABLED(CPU_THERMAL) macro into a stub
cpufreq: s5pv210: Don't flood kernel log after cpufreq change
cpufreq: pcc-cpufreq: Fail initialization if driver cannot be registered
cpufreq: add driver for Raspberry Pi
cpufreq: Switch imx7d to imx-cpufreq-dt for speed grading
cpufreq: imx-cpufreq-dt: Remove global platform match list
cpufreq: brcmstb-avs-cpufreq: Fix types for voltage/frequency
cpufreq: brcmstb-avs-cpufreq: Fix initial command check
cpufreq: armada-37xx: Remove set but not used variable 'freq'
cpufreq: imx-cpufreq-dt: Fix no OPPs available on unfused parts
dt-bindings: imx-cpufreq-dt: Document opp-supported-hw usage
cpufreq: Add imx-cpufreq-dt driver
On some occasions cpufreq_verify_current_freq() schedules a work whose
callback is handle_update(), which further calls cpufreq_update_policy()
which may end up calling cpufreq_verify_current_freq() again.
On the other hand, when cpufreq_update_policy() is called from
handle_update(), the pointer to the cpufreq policy is already
available, but cpufreq_cpu_acquire() is still called to get it in
cpufreq_update_policy(), which should be avoided as well.
To fix these issues, create a new helper, refresh_frequency_limits(),
and make both handle_update() call it cpufreq_update_policy().
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
[ rjw: Rename reeval_frequency_limits() as refresh_frequency_limits() ]
[ rjw: Changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Their implementations are quite similar, so modify
cpufreq_update_current_freq() somewhat and call it from
__cpufreq_get().
Also rename cpufreq_update_current_freq() to
cpufreq_verify_current_freq(), as that's what it is doing.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
[ rjw: Subject & changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
CPUFREQ_CONST_LOOPS was introduced in a very old commit from pre-2.6
kernel release by commit 6a4a93f9c0d5 ("[CPUFREQ] Fix 'out of sync'
issue").
Basically, that commit does two things:
- It adds the frequency verification code (which is quite similar to
what we have today as well).
- And it sets the CPUFREQ_CONST_LOOPS flag only for setpolicy drivers,
rightly so based on the code we had then. The idea was to avoid
frequency validation for setpolicy drivers as the cpufreq core doesn't
know what frequency the hardware is running at and so no point in
doing frequency verification.
The problem happened when we started to use the same CPUFREQ_CONST_LOOPS
flag for constant loops-per-jiffy thing as well and many has_target()
drivers started using the same flag and unknowingly skipped the
verification of frequency. There is no logical reason behind skipping
frequency validation because of the presence of CPUFREQ_CONST_LOOPS
flag otherwise.
Fix this issue by skipping frequency validation only for setpolicy
drivers and always doing it for has_target() drivers irrespective of
the presence or absence of CPUFREQ_CONST_LOOPS flag.
cpufreq_notify_transition() is only called for has_target() type driver
and not for set_policy type, and the check is simply redundant. Remove
it as well.
Also remove () around freq comparison statement as they aren't required
and checkpatch also warns for them.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
For code consistency, use has_target() instead of !setpolicy everywhere,
as it is already done at several places. Maybe we should also use
"!has_target()" instead of "cpufreq_driver->setpolicy" where we need to
check if the driver supports setpolicy, so to use only one expression
for this kind of differentiation.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
cpufreq_start_governor() is only called for !setpolicy case, checking it
again is not required.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
cpufreq_online() and cpufreq_offline() [un]register the driver as
a cooling device. This is done if the driver is flagged as a cooling
device in addition with an IS_ENABLED() check to compile out the branching
code.
Group this test in a stub function added in the cpufreq header instead
of having the IS_ENABLED() in the code.
Suggested-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull ARM cpufreq changes for v5.3 from Viresh Kumar:
"This pull request contains:
- Minor fixes for brcmstb driver (Florian).
- New imx-cpufreq driver, its bindings and code around it (Leonard).
- New Raspberry Pi driver (Nicolas).
- Minor fix for s5pv210 driver (Pawel).
- Minor cleanup for armada driver (YueHaibing)."
* 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: s5pv210: Don't flood kernel log after cpufreq change
cpufreq: add driver for Raspberry Pi
cpufreq: Switch imx7d to imx-cpufreq-dt for speed grading
cpufreq: imx-cpufreq-dt: Remove global platform match list
cpufreq: brcmstb-avs-cpufreq: Fix types for voltage/frequency
cpufreq: brcmstb-avs-cpufreq: Fix initial command check
cpufreq: armada-37xx: Remove set but not used variable 'freq'
cpufreq: imx-cpufreq-dt: Fix no OPPs available on unfused parts
dt-bindings: imx-cpufreq-dt: Document opp-supported-hw usage
cpufreq: Add imx-cpufreq-dt driver
This commit replaces printk with pr_debug, so we don't flood kernel log.
Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Based on 2 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation #
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 4122 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license this
program is distributed in the hope that it will be useful but
without any warranty without even the implied warranty of
merchantability or fitness for a particular purpose see the gnu
general public license for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 53 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190602204653.904365654@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make pcc_cpufreq_init() return error codes when the driver cannot be
registered. Otherwise the driver can shows up loaded via lsmod even
though it failed initialization. This is confusing to the user.
Signed-off-by: David Arcari <darcari@redhat.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Raspberry Pi's firmware offers and interface though which update it's
performance requirements. It allows us to request for specific runtime
frequencies, which the firmware might or might not respect, depending on
the firmware configuration and thermals.
As the maximum and minimum frequencies are configurable in the firmware
there is no way to know in advance their values. So the Raspberry Pi
cpufreq driver queries them, builds an opp frequency table to then
launch cpufreq-dt.
Also, as the firmware interface might be configured as a module, making
the cpu clock unavailable during init, this implements a full fledged
driver, as opposed to most drivers registering cpufreq-dt, which only
make use of an init routine.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Acked-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
This driver can handle speed grading bits on imx7d just like on imx8mq
and imx8mm.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
This is not currently needed, instead a platform device is always created
from SOC-specific code.
We can use of_machine_is_compatible for per-SOC behavior instead.
Suggested-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation version 2 of the license
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 315 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Armijn Hemel <armijn@tjaldur.nl>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531190115.503150771@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
your use of this code is subject to the terms and conditions of the
gnu general public license version 2 see copying or http www gnu org
licenses gpl html
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 3 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Armijn Hemel <armijn@tjaldur.nl>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190530000437.701946635@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the version 2 of the gnu general public
license as published by the free software foundation
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 3 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Armijn Hemel <armijn@tjaldur.nl>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190530000434.524820338@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms and conditions of the gnu general public license
version 2 as published by the free software foundation this program
is distributed in the hope it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 263 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141901.208660670@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this software is licensed under the terms of the gnu general public
license version 2 as published by the free software foundation and
may be copied distributed and modified under those terms this
program is distributed in the hope that it will be useful but
without any warranty without even the implied warranty of
merchantability or fitness for a particular purpose see the gnu
general public license for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 285 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141900.642774971@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
What we read back from the register is going to be capped at 32-bits,
and cpufreq_freq_table.frequency is an unsigned int. Avoid any possible
value truncation by using the appropriate return value.
Fixes: de322e0859 ("cpufreq: brcmstb-avs-cpufreq: AVS CPUfreq driver for Broadcom STB SoCs")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
There is a logical error in brcm_avs_is_firmware_loaded() whereby if the
firmware returns -EINVAL, we will be reporting this as an error. The
comment is correct, the code was not.
Fixes: de322e0859 ("cpufreq: brcmstb-avs-cpufreq: AVS CPUfreq driver for Broadcom STB SoCs")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/cpufreq/armada-37xx-cpufreq.c: In function 'armada37xx_cpufreq_avs_setup':
drivers/cpufreq/armada-37xx-cpufreq.c:260:28: warning:
variable 'freq' set but not used [-Wunused-but-set-variable]
It's never used since introduction in commit 1c3528232f ("cpufreq:
armada-37xx: Add AVS support")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Early samples without fuses written report "0 0" which means consumer
segment and minimum speed grading. According to datasheet the minimum speed
grade is not supported for consumer parts so all OPPs are disabled
which results in stack dumps later on.
Fix by clamping minimum consumer speed grade to 1 on imx8mm and imx8mq.
Fixes: 4d28ba1d62 ("cpufreq: Add imx-cpufreq-dt driver")
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
[ Viresh: s/minumum/minimum/ in patch and log ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 655 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070034.575739538@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
licensed under the terms of the gnu gpl license version 2
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 62 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.929121379@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details you
should have received a copy of the gnu general public license along
with this program if not write to the free software foundation inc
59 temple place suite 330 boston ma 02111 1307 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 1334 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 or at your option any
later version this program is distributed in the hope that it will
be useful but without any warranty without even the implied warranty
of merchantability or fitness for a particular purpose see the gnu
general public license for more details you should have received a
copy of the gnu general public license along with this program if
not write to the free software foundation inc 675 mass ave cambridge
ma 02139 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 77 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Armijn Hemel <armijn@tjaldur.nl>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.837555891@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 3029 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 or at your option any
later version this program is distributed in the hope that it will
be useful but without any warranty without even the implied warranty
of merchantability or fitness for a particular purpose see the gnu
general public license for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 44 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190523091651.032047323@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add SPDX license identifiers to all files which:
- Have no license information of any form
- Have MODULE_LICENCE("GPL*") inside which was used in the initial
scan/conversion to ignore the file
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Right now in upstream imx8m cpufreq support just lists a common subset
of OPPs because the higher ones should only be attempted after checking
speed grading in fuses.
Add a small driver which checks speed grading from nvmem cells before
registering cpufreq-dt.
This driver allows unlocking all frequencies for imx8mm and imx8mq and
could be applied to other chips like imx7d
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
include when we had clk_readl() and clk_writel(), but those are gone now
so this patch pushes the dependency out to the users of clk-provider.h.
-----BEGIN PGP SIGNATURE-----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=JjQo
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull more clk framework updates from Stephen Boyd:
"One more patch to remove io.h from clk-provider.h.
We used to need this include when we had clk_readl() and clk_writel(),
but those are gone now so this patch pushes the dependency out to the
users of clk-provider.h"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: Remove io.h from clk-provider.h
- Fix recent regression causing kernels built with CONFIG_PM
unset to crash on systems that support the Performance and
Energy Bias Hint (EPB) by avoiding to compile the EPB-related
code depending on CONFIG_PM when it is unset (Rafael Wysocki).
- Clean up the transition notifier invocation code in the cpufreq
core and change some users of cpufreq transition notifiers
accordingly (Viresh Kumar).
- Change MAINTAINERS to cover the schedutil governor as part of
cpufreq (Viresh Kumar).
- Simplify cpufreq_init_policy() to avoid redundant computations
(Yue Hu).
- Add explanatory comment to the cpufreq core (Rafael Wysocki).
- Introduce a new flag, GENPD_FLAG_RPM_ALWAYS_ON, to the generic
power domains (genpd) framework along with the first user of it
(Leonard Crestez).
-----BEGIN PGP SIGNATURE-----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=LqTN
-----END PGP SIGNATURE-----
Merge tag 'pm-5.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These fix a recent regression causing kernels built with CONFIG_PM
unset to crash on systems that support the Performance and Energy Bias
Hint (EPB), clean up the cpufreq core and some users of transition
notifiers and introduce a new power domain flag into the generic power
domains framework (genpd).
Specifics:
- Fix recent regression causing kernels built with CONFIG_PM unset to
crash on systems that support the Performance and Energy Bias Hint
(EPB) by avoiding to compile the EPB-related code depending on
CONFIG_PM when it is unset (Rafael Wysocki).
- Clean up the transition notifier invocation code in the cpufreq
core and change some users of cpufreq transition notifiers
accordingly (Viresh Kumar).
- Change MAINTAINERS to cover the schedutil governor as part of
cpufreq (Viresh Kumar).
- Simplify cpufreq_init_policy() to avoid redundant computations (Yue
Hu).
- Add explanatory comment to the cpufreq core (Rafael Wysocki).
- Introduce a new flag, GENPD_FLAG_RPM_ALWAYS_ON, to the generic
power domains (genpd) framework along with the first user of it
(Leonard Crestez)"
* tag 'pm-5.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
soc: imx: gpc: Use GENPD_FLAG_RPM_ALWAYS_ON for ERR009619
PM / Domains: Add GENPD_FLAG_RPM_ALWAYS_ON flag
cpufreq: Update MAINTAINERS to include schedutil governor
cpufreq: Don't find governor for setpolicy drivers in cpufreq_init_policy()
cpufreq: Explain the kobject_put() in cpufreq_policy_alloc()
cpufreq: Call transition notifier only once for each policy
x86: intel_epb: Take CONFIG_PM into account
In cpufreq_init_policy() we will check if there's last_governor for target
and setpolicy type. However last_governor is set only if has_target() is
true in cpufreq_offline(). That means find last_governor for setpolicy
type is pointless. Also new_policy.governor will not be used if ->setpolicy
callback is set in cpufreq_set_policy().
Moreover, there's duplicate ->setpolicy check in using default policy path.
Let's add a new helper function to avoid it. Also update comments.
Signed-off-by: Yue Hu <huyue2@yulong.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
It may not be particularly clear why the kobject_put() after
failing kobject_init_and_add() in cpufreq_policy_alloc() is not
redundant, so add a comment to explain that.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Currently, the notifiers are called once for each CPU of the policy->cpus
cpumask. It would be more optimal if the notifier can be called only
once and all the relevant information be provided to it. Out of the 23
drivers that register for the transition notifiers today, only 4 of them
do per-cpu updates and the callback for the rest can be called only once
for the policy without any impact.
This would also avoid multiple function calls to the notifier callbacks
and reduce multiple iterations of notifier core's code (which does
locking as well).
This patch adds pointer to the cpufreq policy to the struct
cpufreq_freqs, so the notifier callback has all the information
available to it with a single call. The five drivers which perform
per-cpu updates are updated to use the cpufreq policy. The freqs->cpu
field is redundant now and is removed.
Acked-by: David S. Miller <davem@davemloft.net> (sparc)
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-----BEGIN PGP SIGNATURE-----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=WZfC
-----END PGP SIGNATURE-----
Merge tag 'printk-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk
Pull printk updates from Petr Mladek:
- Allow state reset of printk_once() calls.
- Prevent crashes when dereferencing invalid pointers in vsprintf().
Only the first byte is checked for simplicity.
- Make vsprintf warnings consistent and inlined.
- Treewide conversion of obsolete %pf, %pF to %ps, %pF printf
modifiers.
- Some clean up of vsprintf and test_printf code.
* tag 'printk-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk:
lib/vsprintf: Make function pointer_string static
vsprintf: Limit the length of inlined error messages
vsprintf: Avoid confusion between invalid address and value
vsprintf: Prevent crash when dereferencing invalid pointers
vsprintf: Consolidate handling of unknown pointer specifiers
vsprintf: Factor out %pO handler as kobject_string()
vsprintf: Factor out %pV handler as va_format()
vsprintf: Factor out %p[iI] handler as ip_addr_string()
vsprintf: Do not check address of well-known strings
vsprintf: Consistent %pK handling for kptr_restrict == 0
vsprintf: Shuffle restricted_pointer()
printk: Tie printk_once / printk_deferred_once into .data.once for reset
treewide: Switch printk users from %pf and %pF to %ps and %pS, respectively
lib/test_printf: Switch to bitmap_zalloc()
Currently the error return path from kobject_init_and_add() is not
followed by a call to kobject_put() - which means we are leaking the
kobject.
Fix it by adding a call to kobject_put() in the error path of
kobject_init_and_add().
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Tobin C. Harding <tobin@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull ARM cpufreq drivers changes for v5.2 from Viresh Kumar:
"This pull request contains:
- Fix for possible object reference leak for few drivers (Wen Yang).
- Fix for armada frequency calculation (Gregory).
- Code cleanup in maple driver (Viresh).
This contains some non-ARM bits as well this time as the patches were
picked up from a series."
* 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: armada-37xx: fix frequency calculation for opp
cpufreq: maple: Remove redundant code from maple_cpufreq_init()
cpufreq: ppc_cbe: fix possible object reference leak
cpufreq: pmac32: fix possible object reference leak
cpufreq/pasemi: fix possible object reference leak
cpufreq: maple: fix possible object reference leak
cpufreq: kirkwood: fix possible object reference leak
cpufreq: imx6q: fix possible object reference leak
cpufreq: ap806: fix possible object reference leak
The frequency calculation was based on the current(max) frequency of the
CPU. However for low frequency, the value used was already the parent
frequency divided by a factor of 2.
Instead of using this frequency, this fix directly get the frequency from
the parent clock.
Fixes: 92ce45fb87 ("cpufreq: Add DVFS support for Armada 37xx")
Cc: <stable@vger.kernel.org>
Reported-by: Christian Neubert <christian.neubert.86@gmail.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The code is using centrino_target() rather than centrino_setpolicy().
Signed-off-by: dongjian <dongjian@yulong.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
[ rjw: Subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Enable support of NXP SoC lx2160a to handle the
lx2160a SoC.
Signed-off-by: Tang Yuantian <andy.tang@nxp.com>
Signed-off-by: Yogesh Gaur <yogeshnarayan.gaur@nxp.com>
Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com>
Acked-by: Scott Wood <oss@buserror.net>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Enable cpufreq feature on ls1028a chip by adding its compatible
string.
Signed-off-by: Yuantian Tang <andy.tang@nxp.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Currenly, __cpufreq_get() called by show_cpuinfo_cur_freq() will check
->get callback. That is needless since cpuinfo_cur_freq attribute will
not be created if ->get is not set. So let's drop it in __cpufreq_get().
Also keep this check in cpufreq_get().
Signed-off-by: Yue Hu <huyue2@yulong.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Initially, bios_limit attribute will be created if driver->bios_limit
is set in cpufreq_add_dev_interface(). So remove the redundant check
for latter show operation.
Signed-off-by: Yue Hu <huyue2@yulong.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
WARNING: Prefer using '"%s...", __func__' to using function's name, in a
string
Switch hardcoded function name with a reference to __func__ making the
code more maintainable
Signed-off-by: Mohan Kumar <mohankumar718@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit 2fb4719b25 ("cpufreq / boost: Kconfig: Support for
software-managed BOOST") added the CONFIG_CPU_FREQ_BOOST_SW config.
However EXYNOS based cpufreq drivers have been removed because of
switching to cpufreq-dt driver which will set boost-attr if required.
So, let's remove this option and update cpufreq_generic_attr[].
Signed-off-by: Yue Hu <huyue2@yulong.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stats is updated by each policy, using the lock by stat can
reduce the contention.
Signed-off-by: Kyle Lin <linkyle0915@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Currently there are three calling paths for cpufreq_boost_supported() in
all as below, we can see the cpufreq_driver null check is needless since
it is already checked before.
<path1>
cpufreq_enable_boost_support()
|-> if (!cpufreq_driver)
|-> cpufreq_boost_supported()
<path2>
cpufreq_register_driver()
|-> if (!driver_data ...
|-> cpufreq_driver = driver_data
|-> cpufreq_boost_supported()
|-> remove_boost_sysfs_file()
|-> cpufreq_boost_supported()
<path3>
cpufreq_unregister_driver()
|-> if (!cpufreq_driver ...
|-> remove_boost_sysfs_file()
|-> cpufreq_boost_supported()
Signed-off-by: Yue Hu <huyue2@yulong.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The success path and error path both look the same, don't duplicate the
code.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The call to of_get_cpu_node returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.
Detected by coccinelle with the following warnings:
./drivers/cpufreq/ppc_cbe_cpufreq.c:89:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 76, but without a corresponding object release within this function.
./drivers/cpufreq/ppc_cbe_cpufreq.c:89:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 76, but without a corresponding object release within this function.
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The call to of_find_node_by_name returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.
Detected by coccinelle with the following warnings:
./drivers/cpufreq/pmac32-cpufreq.c:557:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 552, but without a corresponding object release within this function.
./drivers/cpufreq/pmac32-cpufreq.c:569:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 552, but without a corresponding object release within this function.
./drivers/cpufreq/pmac32-cpufreq.c:598:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 587, but without a corresponding object release within this function.
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: linux-pm@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The call to of_get_cpu_node returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.
Detected by coccinelle with the following warnings:
./drivers/cpufreq/pasemi-cpufreq.c:212:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 147, but without a corresponding object release within this function.
./drivers/cpufreq/pasemi-cpufreq.c:220:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 147, but without a corresponding object release within this function.
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The call to of_cpu_device_node_get returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.
Detected by coccinelle with the following warnings:
./drivers/cpufreq/maple-cpufreq.c:213:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 177, but without a corresponding object release within this function.
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The call to of_get_child_by_name returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.
Detected by coccinelle with the following warnings:
./drivers/cpufreq/kirkwood-cpufreq.c:127:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 118, but without a corresponding object release within this function.
./drivers/cpufreq/kirkwood-cpufreq.c:133:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 118, but without a corresponding object release within this function.
and also do some cleanup:
- of_node_put(np);
- np = NULL;
...
of_node_put(np);
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The call to of_node_get returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.
Detected by coccinelle with the following warnings:
./drivers/cpufreq/imx6q-cpufreq.c:391:4-10: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 348, but without a corresponding object release within this function.
./drivers/cpufreq/imx6q-cpufreq.c:395:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 348, but without a corresponding object release within this function.
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: linux-pm@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The call to of_find_compatible_node returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.
Detected by coccinelle with the following warnings:
./drivers/cpufreq/armada-8k-cpufreq.c:187:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 130, but without a corresponding object release within this function.
./drivers/cpufreq/armada-8k-cpufreq.c:191:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 130, but without a corresponding object release within this function.
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Gregory Clement <gregory.clement@bootlin.com>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Using static_cpu_has() is pointless on those paths, convert them to the
boot_cpu_has() variant.
No functional changes.
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
While the cpuinfo.max_freq value doesn't really matter for
intel_pstate in the active mode, in the passive mode it is used by
governors as the maximum physical frequency of the CPU and the
results of governor computations generally depend on it. Also it
is made available to user space via sysfs and it should match the
current HW configuration.
For this reason, make intel_pstate update cpuinfo.max_freq for all
CPUs if it detects a global change of turbo frequency settings from
"disable" to "enable" or the other way associated with a _PPC change
notification from the platform firmware.
Note that policy_is_inactive(), cpufreq_cpu_acquire(),
cpufreq_cpu_release(), and cpufreq_set_policy() need to be made
available to it for this purpose.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=200759
Reported-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Tested-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
It sometimes is necessary to find a cpufreq policy for a given CPU
and acquire its rwsem (for writing) immediately after that, so
introduce cpufreq_cpu_acquire() as a helper for that and the
complementary cpufreq_cpu_release().
Make cpufreq_update_policy() use the new functions.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
In some cases, the platform firmware disables or enables turbo
frequencies for all CPUs globally before triggering a _PPC change
notification for one of them. Obviously, that global change affects
all CPUs, not just the notified one, and it needs to be acted upon by
cpufreq.
The intel_pstate driver is able to detect such global changes of
the settings, but it also needs to update policy limits for all
CPUs if that happens, in particular if turbo frequencies are
enabled globally - to allow them to be used.
For this reason, introduce a new cpufreq driver callback to be
invoked on _PPC notifications, if present, instead of simply
calling cpufreq_update_policy() for the notified CPU and make
intel_pstate use it to trigger policy updates for all CPUs
in the system if global settings change.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=200759
Reported-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Tested-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
This driver is Intel-only so loading on anything which is not Intel is
pointless. Prevent it from doing so.
While at it, correct the "not supported" print statement to say CPU
"model" which is what that test does.
Fixes: 076b862c7e (cpufreq: intel_pstate: Add reasons for failure and debug messages)
Suggested-by: Erwan Velu <e.velu@criteo.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Free the priv structure only after we are done using it.
Fixes: 1690d8bb91 ("cpufreq: scpi/scmi: Fix freeing of dynamic OPPs")
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Cc: 4.20+ <stable@vger.kernel.org> # 4.20+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The ACPI specification states that if the "Guaranteed Performance
Register" is not implemented, the OSPM assumes guaranteed performance
to always be equal to nominal performance.
So for invalid or unimplemented guaranteed performance register, use
nominal performance as guaranteed performance.
This change will fall back to nominal_perf when guranteed_perf is
invalid. If nominal_perf is also invalid or not present, fall back
to the existing implementation, which is to read from HWP Capabilities
MSR.
Fixes: 86d333a8cc ("cpufreq: intel_pstate: Add base_frequency attribute")
Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: 4.20+ <stable@vger.kernel.org> # 4.20+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
After commit b8bd1581aa ("cpufreq: intel_pstate: Rework iowait
boosting to be less aggressive") the handling of the case when
the SCHED_CPUFREQ_IOWAIT flag is set again after a few iterations of
intel_pstate_update_util() is a bit inconsistent, because the
new value of cpu->iowait_boost may be lower than ONE_EIGHTH_FP
if it was set before, but has not dropped down to zero just yet.
Fix that up by ensuring that the new value of cpu->iowait_boost
will always be at least ONE_EIGHTH_FP then.
Fixes: b8bd1581aa ("cpufreq: intel_pstate: Rework iowait boosting to be less aggressive")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
pxa_cpufreq_init_voltages() is marked __init but usually inlined into
the non-__init pxa_cpufreq_init() function. When building with clang,
it can stay as a standalone function in a discarded section, and produce
this warning:
WARNING: vmlinux.o(.text+0x616a00): Section mismatch in reference from the function pxa_cpufreq_init() to the function .init.text:pxa_cpufreq_init_voltages()
The function pxa_cpufreq_init() references
the function __init pxa_cpufreq_init_voltages().
This is often because pxa_cpufreq_init lacks a __init
annotation or the annotation of pxa_cpufreq_init_voltages is wrong.
Fixes: 50e77fcd79 ("ARM: pxa: remove __init from cpufreq_driver->init()")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fix the formatting of the cpufreq_cpu_get() and cpufreq_cpu_put()
kerneldoc comments and rework them to be somewhat easier to follow.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Update the PM-runtime framework to use ktime instead of
jiffies for accounting (Thara Gopinath, Vincent Guittot).
- Optimize the autosuspend code in the PM-runtime framework
somewhat (Ladislav Michl).
- Add a PM core flag to mark devices that don't need any form of
power management (Sudeep Holla).
- Introduce driver API documentation for cpuidle and add a new
cpuidle governor for tickless systems (Rafael Wysocki).
- Add Jacobsville support to the intel_idle driver (Zhang Rui).
- Clean up a cpuidle core header file and the cpuidle-dt and ACPI
processor-idle drivers (Yangtao Li, Joseph Lo, Yazen Ghannam).
- Add new cpufreq driver for Armada 8K (Gregory Clement).
- Fix and clean up cpufreq core (Rafael Wysocki, Viresh Kumar,
Amit Kucheria).
- Add support for light-weight tear-down and bring-up of CPUs to the
cpufreq core and use it in the cpufreq-dt driver (Viresh Kumar).
- Fix cpu_cooling Kconfig dependencies, add support for CPU cooling
auto-registration to the cpufreq core and use it in multiple
cpufreq drivers (Amit Kucheria).
- Fix some minor issues and do some cleanups in the davinci,
e_powersaver, ap806, s5pv210, qcom and kryo cpufreq drivers
(Bartosz Golaszewski, Gustavo Silva, Julia Lawall, Paweł Chmiel,
Taniya Das, Viresh Kumar).
- Add a Hisilicon CPPC quirk to the cppc_cpufreq driver (Xiongfeng
Wang).
- Clean up the intel_pstate and acpi-cpufreq drivers (Erwan Velu,
Rafael Wysocki).
- Clean up multiple cpufreq drivers (Yangtao Li).
- Update cpufreq-related MAINTAINERS entries (Baruch Siach, Lukas
Bulwahn).
- Add support for exposing the Energy Model via debugfs and make
multiple cpufreq drivers register an Energy Model to support
energy-aware scheduling (Quentin Perret, Dietmar Eggemann,
Matthias Kaehlcke).
- Add Ice Lake mobile and Jacobsville support to the Intel RAPL
power-capping driver (Gayatri Kammela, Zhang Rui).
- Add a power estimation helper to the operating performance points
(OPP) framework and clean up a core function in it (Quentin Perret,
Viresh Kumar).
- Make minor improvements in the generic power domains (genpd), OPP
and system suspend frameworks and in the PM core (Aditya Pakki,
Douglas Anderson, Greg Kroah-Hartman, Rafael Wysocki, Yangtao Li).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=TSKG
-----END PGP SIGNATURE-----
Merge tag 'pm-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These are PM-runtime framework changes to use ktime instead of jiffies
for accounting, new PM core flag to mark devices that don't need any
form of power management, cpuidle updates including driver API
documentation and a new governor, cpufreq updates including a new
driver for Armada 8K, thermal cleanups and more, some energy-aware
scheduling (EAS) enabling changes, new chips support in the intel_idle
and RAPL drivers and assorted cleanups in some other places.
Specifics:
- Update the PM-runtime framework to use ktime instead of jiffies for
accounting (Thara Gopinath, Vincent Guittot)
- Optimize the autosuspend code in the PM-runtime framework somewhat
(Ladislav Michl)
- Add a PM core flag to mark devices that don't need any form of
power management (Sudeep Holla)
- Introduce driver API documentation for cpuidle and add a new
cpuidle governor for tickless systems (Rafael Wysocki)
- Add Jacobsville support to the intel_idle driver (Zhang Rui)
- Clean up a cpuidle core header file and the cpuidle-dt and ACPI
processor-idle drivers (Yangtao Li, Joseph Lo, Yazen Ghannam)
- Add new cpufreq driver for Armada 8K (Gregory Clement)
- Fix and clean up cpufreq core (Rafael Wysocki, Viresh Kumar, Amit
Kucheria)
- Add support for light-weight tear-down and bring-up of CPUs to the
cpufreq core and use it in the cpufreq-dt driver (Viresh Kumar)
- Fix cpu_cooling Kconfig dependencies, add support for CPU cooling
auto-registration to the cpufreq core and use it in multiple
cpufreq drivers (Amit Kucheria)
- Fix some minor issues and do some cleanups in the davinci,
e_powersaver, ap806, s5pv210, qcom and kryo cpufreq drivers
(Bartosz Golaszewski, Gustavo Silva, Julia Lawall, Paweł Chmiel,
Taniya Das, Viresh Kumar)
- Add a Hisilicon CPPC quirk to the cppc_cpufreq driver (Xiongfeng
Wang)
- Clean up the intel_pstate and acpi-cpufreq drivers (Erwan Velu,
Rafael Wysocki)
- Clean up multiple cpufreq drivers (Yangtao Li)
- Update cpufreq-related MAINTAINERS entries (Baruch Siach, Lukas
Bulwahn)
- Add support for exposing the Energy Model via debugfs and make
multiple cpufreq drivers register an Energy Model to support
energy-aware scheduling (Quentin Perret, Dietmar Eggemann, Matthias
Kaehlcke)
- Add Ice Lake mobile and Jacobsville support to the Intel RAPL
power-capping driver (Gayatri Kammela, Zhang Rui)
- Add a power estimation helper to the operating performance points
(OPP) framework and clean up a core function in it (Quentin Perret,
Viresh Kumar)
- Make minor improvements in the generic power domains (genpd), OPP
and system suspend frameworks and in the PM core (Aditya Pakki,
Douglas Anderson, Greg Kroah-Hartman, Rafael Wysocki, Yangtao Li)"
* tag 'pm-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (80 commits)
cpufreq: kryo: Release OPP tables on module removal
cpufreq: ap806: add missing of_node_put after of_device_is_available
cpufreq: acpi-cpufreq: Report if CPU doesn't support boost technologies
cpufreq: Pass updated policy to driver ->setpolicy() callback
cpufreq: Fix two debug messages in cpufreq_set_policy()
cpufreq: Reorder and simplify cpufreq_update_policy()
cpufreq: Add kerneldoc comments for two core functions
PM / core: Add support to skip power management in device/driver model
cpufreq: intel_pstate: Rework iowait boosting to be less aggressive
cpufreq: intel_pstate: Eliminate intel_pstate_get_base_pstate()
cpufreq: intel_pstate: Avoid redundant initialization of local vars
powercap/intel_rapl: add Ice Lake mobile
ACPI / processor: Set P_LVL{2,3} idle state descriptions
cpufreq / cppc: Work around for Hisilicon CPPC cpufreq
ACPI / CPPC: Add a helper to get desired performance
cpufreq: davinci: move configuration to include/linux/platform_data
cpufreq: speedstep: convert BUG() to BUG_ON()
cpufreq: powernv: fix missing check of return value in init_powernv_pstates()
cpufreq: longhaul: remove unneeded semicolon
cpufreq: pcc-cpufreq: remove unneeded semicolon
..
As usual, the drivers/tee and drivers/reset subsystems get merged
here, with the expected set of smaller updates and some new hardware
support. The tee subsystem now supports device drivers to be attached
to a tee, the first example here is a random number driver with its
implementation in the secure world.
Three new power domain drivers get added for specific chip families:
- Broadcom BCM283x chips (used in Raspberry Pi)
- Qualcomm Snapdragon phone chips
- Xilinx ZynqMP FPGA SoCs
One new driver is added to talk to the BPMP firmware on NVIDIA
Tegra210
Existing drivers are extended for new SoC variants from NXP,
NVIDIA, Amlogic and Qualcomm.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=+DOl
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"As usual, the drivers/tee and drivers/reset subsystems get merged
here, with the expected set of smaller updates and some new hardware
support. The tee subsystem now supports device drivers to be attached
to a tee, the first example here is a random number driver with its
implementation in the secure world.
Three new power domain drivers get added for specific chip families:
- Broadcom BCM283x chips (used in Raspberry Pi)
- Qualcomm Snapdragon phone chips
- Xilinx ZynqMP FPGA SoCs
One new driver is added to talk to the BPMP firmware on NVIDIA
Tegra210
Existing drivers are extended for new SoC variants from NXP, NVIDIA,
Amlogic and Qualcomm"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (113 commits)
tee: optee: update optee_msg.h and optee_smc.h to dual license
tee: add cancellation support to client interface
dpaa2-eth: configure the cache stashing amount on a queue
soc: fsl: dpio: configure cache stashing destination
soc: fsl: dpio: enable frame data cache stashing per software portal
soc: fsl: guts: make fsl_guts_get_svr() static
hwrng: make symbol 'optee_rng_id_table' static
tee: optee: Fix unsigned comparison with less than zero
hwrng: Fix unsigned comparison with less than zero
tee: fix possible error pointer ctx dereferencing
hwrng: optee: Initialize some structs using memset instead of braces
tee: optee: Initialize some structs using memset instead of braces
soc: fsl: dpio: fix memory leak of a struct qbman on error exit path
clk: tegra: dfll: Make symbol 'tegra210_cpu_cvb_tables' static
soc: qcom: llcc-slice: Fix typos
qcom: soc: llcc-slice: Consolidate some code
qcom: soc: llcc-slice: Clear the global drv_data pointer on error
drivers: soc: xilinx: Add ZynqMP power domain driver
firmware: xilinx: Add APIs to control node status/power
dt-bindings: power: Add ZynqMP power domain bindings
...
* pm-opp:
cpufreq: OMAP: Register an Energy Model
cpufreq: imx6q: Register an Energy Model
opp: no need to check return value of debugfs_create functions
cpufreq: mediatek: Register an Energy Model
cpufreq: scmi: Register an Energy Model
cpufreq: arm_big_little: Register an Energy Model
cpufreq: scpi: Register an Energy Model
cpufreq: dt: Register an Energy Model
Pull cpufreq driver fixes for v5.1 from Viresh Kumar:
"This pull request contains minor fixes for ap806 and kryo cpufreq
drivers (Julia Lawall and Viresh Kumar)."
* 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: kryo: Release OPP tables on module removal
cpufreq: ap806: add missing of_node_put after of_device_is_available
Commit 5ad7346b4a ("cpufreq: kryo: Add module remove and exit") made
it possible to build the kryo cpufreq driver as a module, but it failed
to release all the resources, i.e. OPP tables, when the module is
unloaded.
This patch fixes it by releasing the OPP tables, by calling
dev_pm_opp_put_supported_hw() for them, from the
qcom_cpufreq_kryo_remove() routine. The array of pointers to the OPP
tables is also allocated dynamically now in qcom_cpufreq_kryo_probe(),
as the pointers will be required while releasing the resources.
Compile tested only.
Cc: 4.18+ <stable@vger.kernel.org> # v4.18+
Fixes: 5ad7346b4a ("cpufreq: kryo: Add module remove and exit")
Reviewed-by: Georgi Djakov <georgi.djakov@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Add an of_node_put when a tested device node is not available.
The semantic patch that fixes this problem is as follows
(http://coccinelle.lip6.fr):
// <smpl>
@@
identifier f;
local idexpression e;
expression x;
@@
e = f(...);
... when != of_node_put(e)
when != x = e
when != e = x
when any
if (<+...of_device_is_available(e)...+>) {
... when != of_node_put(e)
(
return e;
|
+ of_node_put(e);
return ...;
)
}
// </smpl>
Fixes: f525a67053 ("cpufreq: ap806: add cpufreq driver for Armada 8K")
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
There is some rare cases where CPB (and possibly IDA) are missing on
processors.
This is the case fixed by commit f7f3dc00f6 ("x86/cpu/AMD: Fix
erratum 1076 (CPB bit)") and following.
In such context, the boost status isn't reported by
/sys/devices/system/cpu/cpufreq/boost.
This commit is about printing a message to report that the CPU
doesn't expose the boost capabilities.
This message could help debugging platforms hit by this phenomena.
Signed-off-by: Erwan Velu <e.velu@criteo.com>
[ rjw: Change the message text somewhat ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The invocation of the ->setpolicy() cpufreq driver callback should
be equivalent to calling cpufreq_governor_limits(policy) for drivers
with internal governors, but in fact it isn't so, because the
temporary new_policy object is passed to it instead of the updated
policy.
That is a bit confusing, so make cpufreq_set_policy() pass the
updated policy to the driver ->setpolicy() callback.
No intentional changes of behavior.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Remove the redundant "cpufreq:" prefix from two debug messages in
cpufreq_set_policy().
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
In cpufreq_update_policy(), instead of updating new_policy.cur
separately, which is kind of confusing, because cpufreq_set_policy()
doesn't take that value into account directly anyway, make the copy
of the existing policy after calling cpufreq_update_current_freq().
No intentional changes of behavior.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Add kerneldoc comments describing cpufreq_set_policy() and
cpufreq_update_policy() as they have not been properly documented
so far and they really need to be documented.
While at it, fix white space around the cpufreq_set_policy() header.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
This issue was detected with the help of Coccinelle. So
change the order of function calls to fix it.
Fixes: 1690d8bb91 (cpufreq: scpi/scmi: Fix freeing of dynamic OPPs)
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Cc: 4.20+ <stable@vger.kernel.org> # 4.20+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull cpufreq drivers material for v5.1 from Viresh Kumar:
"This contains:
- Minor cleanups for pcc, longhaul, powerenv and speedstep drivers (Yangtao Li).
- Moving configuration data out of mach directory for davinci (Bartosz Golaszewski)."
* 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: davinci: move configuration to include/linux/platform_data
cpufreq: speedstep: convert BUG() to BUG_ON()
cpufreq: powernv: fix missing check of return value in init_powernv_pstates()
cpufreq: longhaul: remove unneeded semicolon
cpufreq: pcc-cpufreq: remove unneeded semicolon
The current iowait boosting mechanism in intel_pstate_update_util()
is quite aggressive, as it goes to the maximum P-state right away,
and may cause excessive amounts of energy to be used, which is not
desirable and arguably isn't necessary too.
Follow commit a5a0809bc5 ("cpufreq: schedutil: Make iowait boost
more energy efficient") that reworked the analogous iowait boost
mechanism in the schedutil governor and make the iowait boosting
in intel_pstate_update_util() work along the same lines.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There is only one caller of intel_pstate_get_base_pstate() and it is
more straightforward to carry out the computation directly in the
caller, so do that and drop intel_pstate_get_base_pstate().
No intentional changes of behavior.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
After commit 1a4fe38add ("cpufreq: intel_pstate: Remove max/min
fractions to limit performance") the initial value of the pstate local
variable in intel_pstate_max_within_limits() and the initial value of
the max_pstate local variable in intel_pstate_prepare_request() are
both immediately discarded, so initialize both these variables to
their target values upfront.
No intentional changes of behavior.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Hisilicon chips do not support delivered performance counter register
and reference performance counter register. But the platform can
calculate the real performance using its own method. We reuse the
desired performance register to store the real performance calculated by
the platform. After the platform finished the frequency adjust, it gets
the real performance and writes it into desired performance register. Os
can use it to calculate the real frequency.
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
[ rjw: Drop unnecessary braces ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The header containing the configuration structure for davinci cpufreq
driver lives in mach-davinci/include/mach/. This is fine for now but
if we want to make davinci part of the multi_v5 build, no code external
to mach-davinci should include machine-specific headers.
Move the configuration structure to include/linux/platform_data.
While we're at it: convert the GPL-2.0 boilerplate to a proper SPDX
license identifier.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
To fix coccinelle WARNING.
WARNING: Use BUG_ON instead of if condition followed by BUG.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
kmalloc() could fail, so insert a check of its return value. And
if it fails, returns -ENOMEM.
And remove (struct pstate_idx_revmap_data *) to fix coccinelle WARNING
by the way.
WARNING: casting value returned by memory allocation function to (struct
pstate_idx_revmap_data *) is useless.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
This uses the DFLL clock support to enable CPU frequency scaling on
Tegra210.
-----BEGIN PGP SIGNATURE-----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=pSIK
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.1-cpufreq' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers
cpufreq: tegra: Add support for Tegra210
This uses the DFLL clock support to enable CPU frequency scaling on
Tegra210.
* tag 'tegra-for-5.1-cpufreq' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
cpufreq: dt-platdev: add Tegra210 to blacklist
cpufreq: tegra124: extend to support Tegra210
cpufreq: tegra124: do not handle the CPU rail
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Double NOT (!!) operation is normally done to convert a non-zero value
to 1 and keep zero as is, but that isn't the requirement in this case.
All we wanted was to make sure that only one of the two routines isn't
set, i.e. either both function pointers are set or both are unset.
This can be done with a single NOT (!) operation as well.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The init code path has several exceptions where the driver can
decide not to load.
As CONFIG_X86_INTEL_PSTATE is generally set to Y, the return code is
not reachable. The initialization code is neither verbose of the
reason why it did choose to prematurely exit, so it is difficult for
a user to determine, on a given platform, why the driver didn't load
properly.
This patch is about reporting to the user the reason/context of why
the driver failed to load. That is a precious hint when debugging
a platform.
Signed-off-by: Erwan Velu <e.velu@criteo.com>
[ rjw: Subject & changelog, minor fixups ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull ARM cpufreq driver updates for v5.1 from Viresh Kumar:
"This pull request contains following changes:
- New Armada 8k cpufreq driver (Gregory CLEMENT).
- qcom driver cleanups (Amit Kucheria, Taniya Das, Yangtao Li).
- s5pv210 driver cleanup (Paweł Chmiel).
- tegra driver cleanup (Yangtao Li).
- Minor update to MAINTAINERS file (Baruch Siach)."
* 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: qcom-hw: Register an Energy Model
cpufreq: qcom: Read voltage LUT and populate OPP
cpufreq: qcom-hw: Move to device_initcall
cpufreq: tegra124: add missing of_node_put()
cpufreq: qcom-kryo: make some variables static
MAINTAINERS: Update the active pm tree for ARM
cpufreq: ap806: add cpufreq driver for Armada 8K
MAINTAINERS: add new entries for Armada 8K cpufreq driver
cpufreq: s5pv210: Defer probe if getting regulators fail
MAINTAINERS: use common indentation
PM / OPP: Introduce a power estimation helper
PM / OPP: Remove unused parameter of _generic_set_opp_clk_only()
Implement the light-weight tear down and bring up helpers to reduce the
amount of work to do on CPU offline/online operation.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The cpufreq core doesn't remove the cpufreq policy anymore on CPU
offline operation, rather that happens when the CPU device gets
unregistered from the kernel. This allows faster recovery when the CPU
comes back online. This is also very useful during system wide
suspend/resume where we offline all non-boot CPUs during suspend and
then bring them back on resume.
This commit takes the same idea a step ahead to allow drivers to do
light weight tear-down and bring-up during CPU offline and online
operations.
A new set of callbacks is introduced, online/offline(). online() gets
called when the first CPU of an inactive policy is brought up and
offline() gets called when all the CPUs of a policy are offlined.
The existing init/exit() callback get called on policy
creation/destruction. They also get called instead of online/offline()
callbacks if the online/offline() callbacks aren't provided.
This also moves around some code to get executed only for the new-policy
case going forward.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull operating performance points (OPP) framework updates for v5.1
from Viresh Kumar:
"This pull request contains following changes:
- Introduced new OPP helper for power-estimation and used it in
several cpufreq drivers (Quentin Perret, Matthias Kaehlcke, Dietmar
Eggemann, and Yangtao Li).
- OPP Debugfs cleanup (Greg KH).
- OPP core cleanup (Viresh Kumar)."
* 'opp/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: OMAP: Register an Energy Model
cpufreq: imx6q: Register an Energy Model
opp: no need to check return value of debugfs_create functions
cpufreq: mediatek: Register an Energy Model
cpufreq: scmi: Register an Energy Model
cpufreq: arm_big_little: Register an Energy Model
cpufreq: scpi: Register an Energy Model
cpufreq: dt: Register an Energy Model
PM / OPP: Introduce a power estimation helper
PM / OPP: Remove unused parameter of _generic_set_opp_clk_only()
Try and register an Energy Model from qcom-cpufreq-hw to allow
interested sub-systems like the task scheduler to use the provided
information.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
[ Viresh: Rebased over cpufreq related changes ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Add support to read the voltage look up table and populate OPP for all
corresponding CPUS for consumers like the energy model could use the
frequency and voltage from the OPP tables. Also update the logic to not add
duplicate OPPs.
Tested-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
subsys_initcall causes problems registering the driver as a thermal
cooling device.
If "faster boot" is the main reason for doing subsys_initcall, this
should be handled in the bootloader or another boot constraint
framework.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Try and register an Energy Model from omap-cpufreq.c to allow
interested subsystems like the task scheduler to use the provided
information.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Try and register an Energy Model from imx6q-cpufreq to allow
interested subsystems like the task scheduler to use the provided
information.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Add cpufreq driver for Marvell AP-806 found on Aramda 8K.
The AP-806 has DFS (Dynamic Frequency Scaling) with coupled
clock domain for two clusters, so this driver will directly
use generic cpufreq-dt driver as backend.
Based on the work of Omri Itach <omrii@marvell.com>.
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
of_cpu_device_node_get() will increase the refcount of device_node,
it is necessary to call of_node_put() at the end to release the
refcount.
Fixes: 9eb15dbbfa ("cpufreq: Add cpufreq driver for Tegra124")
Cc: <stable@vger.kernel.org> # 4.4+
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The variables are local to the source and do not
need to be in global scope, so make them static.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
There is possibility, that when probing driver, regulators are not yet
initialized. In this case we should return EPROBE_DEFER and wait till
they're initialized, since they're required currently for cpufreq driver
to work. Also move regulator initialization code at beginning of probe,
so we can defer as fast as posibble.
Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Try and register an Energy Model from mediatek-cpufreq to allow
interested subsystems like the task scheduler to use the provided
information.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The Energy Model (EM) framework provides an API to register the active
power of CPUs. Call this API from the scmi-cpufreq driver by using the
power costs obtained from firmware. This is done to ensure interested
subsystems (the task scheduler, for example) can make use of the EM
when available.
Signed-off-by: Quentin Perret <quentin.perret@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
