platform_get_resource_byname() is used when there
is list of reg entries. As lpass-cpu node has only
one reg entry, use platform_get_resource() instead.
Signed-off-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/1597402388-14112-11-git-send-email-rohitkr@codeaurora.org
Signed-off-by: Mark Brown <broonie@kernel.org>
i2sctl register value is set to 0 during hw_free(). This
impacts any ongoing concurrent session on the same i2s
port. As trigger() stop already resets enable bit to 0,
there is no need of explicit hw_free. Removing it to
fix the issue.
Fixes: 80beab8e1d ("ASoC: qcom: Add LPASS CPU DAI driver")
Signed-off-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/1597402388-14112-7-git-send-email-rohitkr@codeaurora.org
Signed-off-by: Mark Brown <broonie@kernel.org>
I2SCTL and DMACTL registers has different bits alignment for newer
LPASS variants of SC7180 soc. Use REG_FIELD_ID() to define the
reg_fields in platform specific file and removed shifts and mask
macros for such registers from header file.
Signed-off-by: Rohit kumar <rohitkr@codeaurora.org>
Link: https://lore.kernel.org/r/1597402388-14112-6-git-send-email-rohitkr@codeaurora.org
Signed-off-by: Mark Brown <broonie@kernel.org>
lpass_pcm_data is never freed. Free it in close
ops to avoid memory leak.
Fixes: 022d00ee0b ("ASoC: lpass-platform: Fix broken pcm data usage")
Signed-off-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/1597402388-14112-5-git-send-email-rohitkr@codeaurora.org
Signed-off-by: Mark Brown <broonie@kernel.org>
We are allocating dma memory for component->dev but trying to mmap
such memory for substream->pcm->card->dev. Replace device argument
in mmap with component->dev to fix this.
Signed-off-by: Ajit Pandey <ajitp@codeaurora.org>
Signed-off-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/1597402388-14112-4-git-send-email-rohitkr@codeaurora.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Ahbix clock is optional clock and not needed for all platforms.
Move it to lpass-apq8016/ipq806x as it is not needed for sc7180.
Signed-off-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/1597402388-14112-3-git-send-email-rohitkr@codeaurora.org
Signed-off-by: Mark Brown <broonie@kernel.org>
LPASS variants have their own soc specific clocks that needs to be
enabled for MI2S audio support. Added a common variable in drvdata to
initialize such clocks using bulk clk api. Such clock names is
defined in variants specific data and needs to fetched during init.
Signed-off-by: Ajit Pandey <ajitp@codeaurora.org>
Signed-off-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/1597402388-14112-2-git-send-email-rohitkr@codeaurora.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Most of the DAPM widgets for DSP ASoC components reuse reg field
of the widgets for its internal calculations, however these are not
real registers. So read/writes to these numbers are not really
valid. However ASoC core will read these registers to get default
state during startup.
With recent changes to ASoC core, every register read/write
failures are reported very verbosely. Prior to this fails to reads
are totally ignored, so we never saw any error messages.
To fix this add dummy read/write function to return default value.
Fixes: e3a33673e8 ("ASoC: qdsp6: q6routing: Add q6routing driver")
Reported-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200811120205.21805-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Looks like the q6afe-dai dapm widget registers are set as "0",
which is a not correct.
As this registers will be read by ASoC core during startup
which will throw up errors, Fix this by making the registers
as SND_SOC_NOPM as these should be never used.
With recent changes to ASoC core, every register read/write
failures are reported very verbosely. Prior to this fails to reads
are totally ignored, so we never saw any error messages.
Fixes: 24c4cbcfac ("ASoC: qdsp6: q6afe: Add q6afe dai driver")
Reported-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200811120205.21805-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Right now the direction of a DAI has to be specified as a literal
number in the device tree, e.g.:
dai@0 {
reg = <0>;
direction = <2>;
};
but this does not make it immediately clear that this is a
playback/RX-only DAI.
Actually, q6asm-dai.c has useful defines for this. Move them to the
dt-bindings header to allow using them in the dts(i) files.
The example above then becomes:
dai@0 {
reg = <0>;
direction = <Q6ASM_DAI_RX>;
};
which is immediately recognizable as playback/RX-only DAI.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200727082502.2341-1-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
qcom_snd_parse_of() tends to produce lots of error messages during bootup:
MultiMedia1: error getting cpu dai name
This happens because the DAIs are not probed until the ADSP remoteproc
has booted, which takes a while. Until it is ready, snd_soc_of_get_dai_name()
returns -EDEFER_PROBE to retry probing later. This is perfectly normal,
so cleanup the kernel log a bit by not printing in case of -EPROBE_DEFER.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200723183904.321040-8-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Now that we have updated qcom_snd_parse_of() to handle the device
tree bindings used for apq8016_sbc, update the apq8016_sbc driver
to use the common function and remove the duplicated code.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200723183904.321040-7-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
The apq8016_sbc device tree binding uses a "qcom," vendor prefix
for all device tree properties, while qcom_snd_parse_of() uses the
same properties without a prefix.
In the future it would be nice to make this consistent, however,
for backwards compatibility we need to parse both names to allow
apq8016_sbc to use the common qcom_snd_parse_of() function.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200723183904.321040-6-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
So far qcom_snd_parse_of() was only used to parse the device tree
for boards using the QDSP6 driver together with DPCM. apq8016_sbc
uses an almost identical version (apq8016_sbc_parse_of()) which
parses links without DPCM.
Given the similarity of the two functions it is useful to combine
these two. To allow using qcom_snd_parse_of() in apq8016_sbc we
need to support parsing links without DPCM as well.
This is pretty simple: A DPCM link in the device tree is defined using:
- DPCM frontend: "cpu"
- DPCM backend: "cpu", "platform" and "codec"
... while a link without DPCM has "cpu" and "codec" (but no "platform").
Add a few more if conditions to handle links without DPCM correctly.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200723183904.321040-5-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
This reverts commit 4a95737440 ("ASoc: q6afe: add support to get
port direction"), since the function is not needed anymore.
q6afe-dai already exposes the possible directions for a DAI through
the DAI capabilities (playback/capture-only DAI). Now we use
snd_soc_dai_link_set_capabilities() to infer the information
directly from the DAI capabilities.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200723183904.321040-4-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit a212008925 ("ASoC: qcom: common: set correct directions for dailinks")
introduced a call to q6afe_is_rx_port() to set the dpcm_playback/capture
parameters correctly. This is necessary because those parameters are now
validated to match the capabilities of the DAIs. [1]
The disadvantage of introducing the call to q6afe_is_rx_port() is that
it makes the qcom_snd_parse_of() helper dependent on the QDSP6 driver.
When the ADSP is bypassed (e.g. in apq8016-sbc) QDSP6 is not used.
There is a generic solution for this now: The correct direction for the links
is already defined by the DAI capabilities (e.g. rx ports only support playback).
Commit 25612477d2 ("ASoC: soc-dai: set dai_link dpcm_ flags with a helper")
introduced the snd_soc_dai_link_set_capabilities() function that we can use
to set dpcm_playback/dpcm_capture according to the capabilities of the DAIs.
Use that for both FE/BE DAI links to avoid the dependency on the QDSP6 driver.
[1]: https://lore.kernel.org/alsa-devel/20200616085409.GA110999@gerhold.net/
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200723183904.321040-3-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Simplify the machine drivers for newer SoCs a bit by using the
devm_* function calls that automatically release the resources
when the driver is removed or when probing fails.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200723183904.321040-2-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
In the function q6adm_open(), q6adm_alloc_copp() doesn't return
NULL. Thus use IS_ERR() to validate the returned value instead
of IS_ERR_OR_NULL(). And delete the extra line.
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20200714112744.20560-1-tangbin@cmss.chinamobile.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fixes the following W=1 kernel build warning(s):
sound/soc/qcom/qdsp6/q6asm.c:924: warning: Function parameter or
member 'codec_profile' not described in 'q6asm_open_write'
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Patrick Lai <plai@codeaurora.org>
Cc: Banajit Goswami <bgoswami@codeaurora.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200709162328.259586-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Make the error reporting more useful by adding opcode to it.
Without this its almost impossible to say which command actually
timed out.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200707163641.17113-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
When building on allyesconfig kernel for a NO_DMA=y platform (e.g.
Sun-3), CONFIG_SND_SOC_QCOM_COMMON=y, but CONFIG_SND_SOC_QDSP6_AFE=n,
leading to a link failure:
sound/soc/qcom/common.o: In function `qcom_snd_parse_of':
common.c:(.text+0x2e2): undefined reference to `q6afe_is_rx_port'
While SND_SOC_QDSP6 depends on HAS_DMA, SND_SOC_MSM8996 and SND_SOC_SDM845
don't, so the following warning is seen:
WARNING: unmet direct dependencies detected for SND_SOC_QDSP6
Depends on [n]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && QCOM_APR [=y] && HAS_DMA [=n]
Selected by [y]:
- SND_SOC_MSM8996 [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && QCOM_APR [=y]
- SND_SOC_SDM845 [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && QCOM_APR [=y] && CROS_EC [=y] && I2C [=y] && SOUNDWIRE [=y]
Until recently, this warning was harmless (from a compile-testing
point-of-view), but the new user of q6afe_is_rx_port() turned this into
a hard failure.
As the QDSP6 driver itself builds fine if NO_DMA=y, and it depends on
QCOM_APR (which in turns depends on ARCH_QCOM || COMPILE_TEST), it is
safe to increase compile testing coverage. Hence fix the link failure
by dropping the HAS_DMA dependency of SND_SOC_QDSP6.
Fixes: a212008925 ("ASoC: qcom: common: set correct directions for dailinks")
Fixes: 6b1687bf76 ("ASoC: qcom: add sdm845 sound card support")
Fixes: a6f933f63f ("ASoC: qcom: apq8096: Add db820c machine driver")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20200629122443.21736-1-geert@linux-m68k.org
Signed-off-by: Mark Brown <broonie@kernel.org>
CROS_EC isn't strictly required for audio to work
on other SDM845 platforms (like the Dragonboard 845c).
So lets remove the dependency and select the related
CROS_EC options via imply.
Signed-off-by: John Stultz <john.stultz@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Rohit kumar <rohitkr@codeaurora.org>
Cc: Patrick Lai <plai@codeaurora.org>
Cc: Banajit Goswami <bgoswami@codeaurora.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: alsa-devel@alsa-project.org
Link: https://lore.kernel.org/r/20200619031407.116140-1-john.stultz@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently both FE and BE dai-links are configured bi-directional,
However the DSP BE dais are only single directional,
so set the directions as supported by the BE dais.
Fixes: c25e295cd7 (ASoC: qcom: Add support to parse common audio device nodes)
Reported-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: John Stultz <john.stultz@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200612123711.29130-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds support to q6afe_is_rx_port() to get direction
of DSP BE dai port, this is useful for setting dailink
directions correctly.
Fixes: c25e295cd7 (ASoC: qcom: Add support to parse common audio device nodes)
Reported-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200612123711.29130-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Successful send of EOS command does not indicate that EOS is actually
finished, correct event to wait EOS is finished is EOS_RENDERED event.
EOS_RENDERED means that the DSP has finished processing all the buffers
for that particular session and stream.
This patch fixes EOS handling!
Fixes: 68fd8480bb ("ASoC: qdsp6: q6asm: Add support to audio stream apis")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200611124159.20742-3-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The LPASS hardware allows configuring the MI2S SD lines to use
when playing/recording audio. However, at the moment the lpass-cpu
driver has SD0 hard-coded for mono/stereo (or additional fixed
SD lines for more channels).
For weird reasons there seems to be hardware that uses one of the
other SD lines for mono/stereo. For example, some Samsung devices
use an external Speaker amplifier connected to Quaternary MI2S.
For some reason, the SD line for audio playback was connected to
SD1 rather than SD0. (I have no idea why...)
At the moment, the lpass-cpu driver cannot be configured to work
for the Speaker on these devices.
The q6afe driver already allows configuring the MI2S SD lines
through the "qcom,sd-lines" device tree property, but this works
only when routing audio through the ADSP.
This commit adds a very similar configuration for the lpass-cpu driver.
It is now possible to add additional subnodes to the lpass device in
the device tree, to configure the SD lines for playback and/or capture.
E.g. for the Samsung devices mentioned above:
&lpass {
dai@3 {
reg = <MI2S_QUATERNARY>;
qcom,playback-sd-lines = <1>;
};
};
qcom,playback/capture-sd-lines takes a list of SD lines (0-3)
in the same format as the q6afe driver. (The difference here is that
q6afe has separate DAIs for playback/capture, while lpass-cpu has one
for both...)
For backwards compatibility with older device trees, the lpass-cpu driver
defaults to LPAIF_I2SCTL_MODE_8CH if the subnode for a DAI is missing.
This is equivalent to the previous behavior: Up to 8 channels can be
configured, and SD0/QUAT01 will be chosen when setting up a stream
with fewer channels.
This allows the speaker to work on Samsung MSM8916 devices
that use an external speaker amplifier.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200425184657.121991-2-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
We can use snd_compress_ops.
Let's switch to use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87r1wivdkz.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For some reason, the MI2S DAIs do not have channels_min/max defined.
This means that snd_soc_dai_stream_valid() returns false,
i.e. the DAIs have neither valid playback nor capture stream.
It's quite surprising that this ever worked correctly,
but in 5.7-rc1 this is now failing badly: :)
Commit 0e9cf4c452 ("ASoC: pcm: check if cpu-dai supports a given stream")
introduced a check for snd_soc_dai_stream_valid() before calling
hw_params(), which means that the q6i2s_hw_params() function
was never called, eventually resulting in:
qcom-q6afe aprsvc:q6afe:4:4: no line is assigned
... even though "qcom,sd-lines" is set in the device tree.
Commit 9b5db05936 ("ASoC: soc-pcm: dpcm: Only allow playback/capture if supported")
now even avoids creating PCM devices if the stream is not supported,
which means that it is failing even earlier with e.g.:
Primary MI2S: ASoC: no backend playback stream
Avoid all that trouble by adding channels_min/max for the MI2S DAIs.
Fixes: 24c4cbcfac ("ASoC: qdsp6: q6afe: Add q6afe dai driver")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200415150050.616392-1-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
All error paths in qcom_snd_parse_of() prints more specific error
messages, so silence the one in apq8096_platform_probe() and
sdm845_snd_platform_probe() to avoid spamming the kernel log.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20200406003229.2354631-1-bjorn.andersson@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
At the moment, playing audio with PulseAudio with the qdsp6 driver
results in distorted sound. It seems like its timer-based scheduling
does not work properly with qdsp6 since setting tsched=0 in
the PulseAudio configuration avoids the issue.
Apparently this happens when the pointer() callback is not accurate
enough. There is a SNDRV_PCM_INFO_BATCH flag that can be used to stop
PulseAudio from using timer-based scheduling by default.
According to https://www.alsa-project.org/pipermail/alsa-devel/2014-March/073816.html:
The flag is being used in the sense explained in the previous audio
meeting -- the data transfer granularity isn't fine enough but aligned
to the period size (or less).
q6asm-dai reports the position as multiple of
prtd->pcm_count = snd_pcm_lib_period_bytes(substream)
so it indeed just a multiple of the period size.
Therefore adding the flag here seems appropriate and makes audio
work out of the box.
Fixes: 2a9e92d371 ("ASoC: qdsp6: q6asm: Add q6asm dai driver")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200330175210.47518-1-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
In existing setup WSA881x codec handles soundwire stream,
however DB845c and other machines based on SDM845c have 2
instances for WSA881x codec. This will force soundwire stream
to be prepared/enabled twice or multiple times.
Handling SoundWire Stream in machine driver would fix this issue.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200317151233.8763-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Qualcomm DSPs also supports the ALAC and APE decoders, so add support
for these and convert the snd_codec_params to qdsp format.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200316055221.1944464-9-vkoul@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Qualcomm DSPs expect ALAC and APE configs to be send for decoders,
so add the API to program the respective config to the DSP.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200316055221.1944464-8-vkoul@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Qualcomm DSPs also supports the wma decoder, so add support for wma
decoder and convert the snd_codec_params to qdsp format.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200316055221.1944464-6-vkoul@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Qualcomm DSPs expect wma v9 and wma v10 configs to be set for wma
decoders, so add the API to program the respective wma config to the DSP
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200316055221.1944464-5-vkoul@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Codec profile is required to be passed for WMA codecs so that we know
the codec profile present and tell DSP accordingly, so update this API
to pass the codec profile as argument
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200316055221.1944464-4-vkoul@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Frontend dais can be configured to rx or tx or both, however having default
routes without considering this configuration can lead to failures during
card probe as below for compress rx only case. These routing have to come
from sound card routing table in device tree.
"routing: ASoC: Failed to add route MM_UL1 -> direct -> MultiMedia1 Capture
msm-snd-sdm845 sound: ASoC: failed to instantiate card -19
"
Reported-by: Vinod Koul <vinod.koul@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200311180422.28363-3-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Existing code enables all the playback and capture dais even
if there is no device tree entry. This can lead to
un-necessary dais in the system which will never be used.
So honour whats specfied in device tree.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200311180422.28363-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
