Previously, f2fs_is_valid_blkaddr(, blkaddr, DATA_GENERIC) will check
whether @blkaddr locates in main area or not.
That check is weak, since the block address in range of main area can
point to the address which is not valid in segment info table, and we
can not detect such condition, we may suffer worse corruption as system
continues running.
So this patch introduce DATA_GENERIC_ENHANCE to enhance the sanity check
which trigger SIT bitmap check rather than only range check.
This patch did below changes as wel:
- set SBI_NEED_FSCK in f2fs_is_valid_blkaddr().
- get rid of is_valid_data_blkaddr() to avoid panic if blkaddr is invalid.
- introduce verify_fio_blkaddr() to wrap fio {new,old}_blkaddr validation check.
- spread blkaddr check in:
* f2fs_get_node_info()
* __read_out_blkaddrs()
* f2fs_submit_page_read()
* ra_data_block()
* do_recover_data()
This patch can fix bug reported from bugzilla below:
https://bugzilla.kernel.org/show_bug.cgi?id=203215https://bugzilla.kernel.org/show_bug.cgi?id=203223https://bugzilla.kernel.org/show_bug.cgi?id=203231https://bugzilla.kernel.org/show_bug.cgi?id=203235https://bugzilla.kernel.org/show_bug.cgi?id=203241
= Update by Jaegeuk Kim =
DATA_GENERIC_ENHANCE enhanced to validate block addresses on read/write paths.
But, xfstest/generic/446 compalins some generated kernel messages saying invalid
bitmap was detected when reading a block. The reaons is, when we get the
block addresses from extent_cache, there is no lock to synchronize it from
truncating the blocks in parallel.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In f2fs_disable_checkpoint(), it needs to detect and propagate error
number returned from f2fs_write_checkpoint().
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We have already checked flag IOCB_DIRECT in the sanity
check of flag IOCB_NOWAIT, so don't have to check it
again here.
Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
As Park Ju Hyung reported in mailing list:
https://sourceforge.net/p/linux-f2fs/mailman/message/36639787/
generic_make_request: Trying to write to read-only block-device loop0 (partno 0)
WARNING: CPU: 0 PID: 23437 at block/blk-core.c:2174 generic_make_request_checks+0x594/0x630
generic_make_request+0x46/0x3d0
submit_bio+0x30/0x110
__submit_merged_bio+0x68/0x390
f2fs_submit_page_write+0x1bb/0x7f0
f2fs_do_write_meta_page+0x7f/0x160
__f2fs_write_meta_page+0x70/0x140
f2fs_sync_meta_pages+0x140/0x250
f2fs_write_checkpoint+0x5c5/0x17b0
f2fs_sync_fs+0x9c/0x110
sync_filesystem+0x66/0x80
f2fs_recover_fsync_data+0x790/0xa30
f2fs_fill_super+0xe4e/0x1980
mount_bdev+0x518/0x610
mount_fs+0x34/0x13f
vfs_kern_mount.part.11+0x4f/0x120
do_mount+0x2d1/0xe40
__x64_sys_mount+0xbf/0xe0
do_syscall_64+0x4a/0xf0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
print_req_error: I/O error, dev loop0, sector 4096
If block device is readonly, we should never trigger write IO from
filesystem layer, but previously, orphan and journal recovery didn't
consider such condition, result in triggering above warning, fix it.
Reported-by: Park Ju Hyung <qkrwngud825@gmail.com>
Tested-by: Park Ju Hyung <qkrwngud825@gmail.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch introduce f2fs_hw_is_readonly() to check whether lower
device is readonly or not, it adapts multiple device scenario.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
For large_nat_bitmap feature, there is a design flaw:
Previous:
struct f2fs_checkpoint layout:
+--------------------------+ 0x0000
| checkpoint_ver |
| ...... |
| checksum_offset |------+
| ...... | |
| sit_nat_version_bitmap[] |<-----|-------+
| ...... | | |
| checksum_value |<-----+ |
+--------------------------+ 0x1000 |
| | nat_bitmap + sit_bitmap
| payload blocks | |
| | |
+--------------------------|<-------------+
Obviously, if nat_bitmap size + sit_bitmap size is larger than
MAX_BITMAP_SIZE_IN_CKPT, nat_bitmap or sit_bitmap may overlap
checkpoint checksum's position, once checkpoint() is triggered
from kernel, nat or sit bitmap will be damaged by checksum field.
In order to fix this, let's relocate checksum_value's position
to the head of sit_nat_version_bitmap as below, then nat/sit
bitmap and chksum value update will become safe.
After:
struct f2fs_checkpoint layout:
+--------------------------+ 0x0000
| checkpoint_ver |
| ...... |
| checksum_offset |------+
| ...... | |
| sit_nat_version_bitmap[] |<-----+
| ...... |<-------------+
| | |
+--------------------------+ 0x1000 |
| | nat_bitmap + sit_bitmap
| payload blocks | |
| | |
+--------------------------|<-------------+
Related report and discussion:
https://sourceforge.net/p/linux-f2fs/mailman/message/36642346/
Reported-by: Park Ju Hyung <qkrwngud825@gmail.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Previously, f2fs_checkpoint.checksum_offset points fixed position of
f2fs_checkpoint structure:
"#define CP_CHKSUM_OFFSET 4092"
It is unnecessary, and it breaks the consecutiveness of nat and sit
bitmap stored across checkpoint park block and payload blocks.
This patch allows f2fs to handle unfixed .checksum_offset.
In addition, for the case checksum value is stored in the middle of
checkpoint park, calculating checksum value with superposition method
like we did for inode_checksum.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Modify coding style
ERROR: code indent should use tabs where possible
Signed-off-by: Youngjun Yoo <youngjun.willow@gmail.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Modify coding style
ERROR: space required before the open parenthesis '('
Signed-off-by: Youngjun Yoo <youngjun.willow@gmail.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch expands scalability of dnode layout, it allows address pointer
number of dnode aligning to specified size (now, the size is one byte by
default), and later the number can align to compress cluster size
(1 << n bytes, n=[2,..)), it can avoid cluster acrossing two dnode, making
design of compress meta layout simple.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch introduces f2fs_read_single_page() to wrap core operations
of reading one page in f2fs_mpage_readpages().
In addition, if we failed in f2fs_mpage_readpages(), propagate error
number to f2fs_read_data_page(), for f2fs_read_data_pages() path,
always return success.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The caller set_file_temperature() is marked as inline as well.
It doesn't make much sense to leave is_extension_exist() un-inlined.
Signed-off-by: Park Ju Hyung <qkrwngud825@gmail.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch fixes to set FI_UPDATE_WRITE only if in-place IO was issued.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
As Jungyeon reported in bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=203239
- Overview
When mounting the attached crafted image and running program, following errors are reported.
Additionally, it hangs on sync after running program.
The image is intentionally fuzzed from a normal f2fs image for testing.
Compile options for F2FS are as follows.
CONFIG_F2FS_FS=y
CONFIG_F2FS_STAT_FS=y
CONFIG_F2FS_FS_XATTR=y
CONFIG_F2FS_FS_POSIX_ACL=y
CONFIG_F2FS_CHECK_FS=y
- Reproduces
cc poc_15.c
./run.sh f2fs
sync
- Kernel messages
------------[ cut here ]------------
kernel BUG at fs/f2fs/segment.c:3162!
RIP: 0010:f2fs_inplace_write_data+0x12d/0x160
Call Trace:
f2fs_do_write_data_page+0x3c1/0x820
__write_data_page+0x156/0x720
f2fs_write_cache_pages+0x20d/0x460
f2fs_write_data_pages+0x1b4/0x300
do_writepages+0x15/0x60
__filemap_fdatawrite_range+0x7c/0xb0
file_write_and_wait_range+0x2c/0x80
f2fs_do_sync_file+0x102/0x810
do_fsync+0x33/0x60
__x64_sys_fsync+0xb/0x10
do_syscall_64+0x43/0xf0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
The reason is f2fs_inplace_write_data() will trigger kernel panic due
to data block locates in node type segment.
To avoid panic, let's just return error code and set SBI_NEED_FSCK to
give a hint to fsck for latter repairing.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
As Jungyeon reported in bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=203233
- Overview
When mounting the attached crafted image and running program, following errors are reported.
Additionally, it hangs on sync after running program.
The image is intentionally fuzzed from a normal f2fs image for testing.
Compile options for F2FS are as follows.
CONFIG_F2FS_FS=y
CONFIG_F2FS_STAT_FS=y
CONFIG_F2FS_FS_XATTR=y
CONFIG_F2FS_FS_POSIX_ACL=y
CONFIG_F2FS_CHECK_FS=y
- Reproduces
cc poc_13.c
mkdir test
mount -t f2fs tmp.img test
cp a.out test
cd test
sudo ./a.out
sync
- Kernel messages
F2FS-fs (sdb): Bitmap was wrongly set, blk:4608
kernel BUG at fs/f2fs/segment.c:2102!
RIP: 0010:update_sit_entry+0x394/0x410
Call Trace:
f2fs_allocate_data_block+0x16f/0x660
do_write_page+0x62/0x170
f2fs_do_write_node_page+0x33/0xa0
__write_node_page+0x270/0x4e0
f2fs_sync_node_pages+0x5df/0x670
f2fs_write_checkpoint+0x372/0x1400
f2fs_sync_fs+0xa3/0x130
f2fs_do_sync_file+0x1a6/0x810
do_fsync+0x33/0x60
__x64_sys_fsync+0xb/0x10
do_syscall_64+0x43/0xf0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
sit.vblocks and sum valid block count in sit.valid_map may be
inconsistent, segment w/ zero vblocks will be treated as free
segment, while allocating in free segment, we may allocate a
free block, if its bitmap is valid previously, it can cause
kernel crash due to bitmap verification failure.
Anyway, to avoid further serious metadata inconsistence and
corruption, it is necessary and worth to detect SIT
inconsistence. So let's enable check_block_count() to verify
vblocks and valid_map all the time rather than do it only
CONFIG_F2FS_CHECK_FS is enabled.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
As Jungyeon reported in bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=203229
- Overview
When mounting the attached crafted image, following errors are reported.
Additionally, it hangs on sync after trying to mount it.
The image is intentionally fuzzed from a normal f2fs image for testing.
Compile options for F2FS are as follows.
CONFIG_F2FS_FS=y
CONFIG_F2FS_STAT_FS=y
CONFIG_F2FS_FS_XATTR=y
CONFIG_F2FS_FS_POSIX_ACL=y
CONFIG_F2FS_CHECK_FS=y
- Reproduces
mkdir test
mount -t f2fs tmp.img test
sync
- Kernel message
kernel BUG at fs/f2fs/recovery.c:591!
RIP: 0010:recover_data+0x12d8/0x1780
Call Trace:
f2fs_recover_fsync_data+0x613/0x710
f2fs_fill_super+0x1043/0x1aa0
mount_bdev+0x16d/0x1a0
mount_fs+0x4a/0x170
vfs_kern_mount+0x5d/0x100
do_mount+0x200/0xcf0
ksys_mount+0x79/0xc0
__x64_sys_mount+0x1c/0x20
do_syscall_64+0x43/0xf0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
With corrupted image wihch has out-of-range valid node/block count, during
recovery, once we failed due to no free space, it will trigger kernel
panic.
Adding sanity check on valid node/block count in f2fs_sanity_check_ckpt()
to detect such condition, so that potential panic can be avoided.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
As Jungyeon reported in bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=203227
- Overview
When mounting the attached crafted image, following errors are reported.
Additionally, it hangs on sync after trying to mount it.
The image is intentionally fuzzed from a normal f2fs image for testing.
Compile options for F2FS are as follows.
CONFIG_F2FS_FS=y
CONFIG_F2FS_STAT_FS=y
CONFIG_F2FS_FS_XATTR=y
CONFIG_F2FS_FS_POSIX_ACL=y
CONFIG_F2FS_CHECK_FS=y
- Reproduces
mkdir test
mount -t f2fs tmp.img test
sync
- Messages
kernel BUG at fs/f2fs/recovery.c:549!
RIP: 0010:recover_data+0x167a/0x1780
Call Trace:
f2fs_recover_fsync_data+0x613/0x710
f2fs_fill_super+0x1043/0x1aa0
mount_bdev+0x16d/0x1a0
mount_fs+0x4a/0x170
vfs_kern_mount+0x5d/0x100
do_mount+0x200/0xcf0
ksys_mount+0x79/0xc0
__x64_sys_mount+0x1c/0x20
do_syscall_64+0x43/0xf0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
During recovery, if ofs_of_node is inconsistent in between recovered
node page and original checkpointed node page, let's just fail recovery
instead of making kernel panic.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
As Jungyeon reported in bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=203225
- Overview
When mounting the attached crafted image and unmounting it, following errors are reported.
Additionally, it hangs on sync after unmounting.
The image is intentionally fuzzed from a normal f2fs image for testing.
Compile options for F2FS are as follows.
CONFIG_F2FS_FS=y
CONFIG_F2FS_STAT_FS=y
CONFIG_F2FS_FS_XATTR=y
CONFIG_F2FS_FS_POSIX_ACL=y
CONFIG_F2FS_CHECK_FS=y
- Reproduces
mkdir test
mount -t f2fs tmp.img test
touch test/t
umount test
sync
- Messages
kernel BUG at fs/f2fs/node.c:3073!
RIP: 0010:f2fs_destroy_node_manager+0x2f0/0x300
Call Trace:
f2fs_put_super+0xf4/0x270
generic_shutdown_super+0x62/0x110
kill_block_super+0x1c/0x50
kill_f2fs_super+0xad/0xd0
deactivate_locked_super+0x35/0x60
cleanup_mnt+0x36/0x70
task_work_run+0x75/0x90
exit_to_usermode_loop+0x93/0xa0
do_syscall_64+0xba/0xf0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0010:f2fs_destroy_node_manager+0x2f0/0x300
NAT table is corrupted, so reserved meta/node inode ids were added into
free list incorrectly, during file creation, since reserved id has cached
in inode hash, so it fails the creation and preallocated nid can not be
released later, result in kernel panic.
To fix this issue, let's do nid boundary check during free nid loading.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
As Jungyeon reported in bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=203221
- Overview
When mounting the attached crafted image and running program, this error is reported.
The image is intentionally fuzzed from a normal f2fs image for testing and I enabled option CONFIG_F2FS_CHECK_FS on.
- Reproduces
cc poc_07.c
mkdir test
mount -t f2fs tmp.img test
cp a.out test
cd test
sudo ./a.out
- Messages
kernel BUG at fs/f2fs/node.c:1279!
RIP: 0010:read_node_page+0xcf/0xf0
Call Trace:
__get_node_page+0x6b/0x2f0
f2fs_iget+0x8f/0xdf0
f2fs_lookup+0x136/0x320
__lookup_slow+0x92/0x140
lookup_slow+0x30/0x50
walk_component+0x1c1/0x350
path_lookupat+0x62/0x200
filename_lookup+0xb3/0x1a0
do_fchmodat+0x3e/0xa0
__x64_sys_chmod+0x12/0x20
do_syscall_64+0x43/0xf0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
On below paths, we can have opportunity to readahead inode page
- gc_node_segment -> f2fs_ra_node_page
- gc_data_segment -> f2fs_ra_node_page
- f2fs_fill_dentries -> f2fs_ra_node_page
Unlike synchronized read, on readahead path, we can set page uptodate
before verifying page's checksum, then read_node_page() will trigger
kernel panic once it encounters a uptodated page w/ incorrect checksum.
So considering readahead scenario, we have to do checksum each time
when loading inode page even if it is uptodated.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
As Jungyeon reported in bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=203219
- Overview
When mounting the attached crafted image and running program, I got this error.
Additionally, it hangs on sync after running the program.
The image is intentionally fuzzed from a normal f2fs image for testing and I enabled option CONFIG_F2FS_CHECK_FS on.
- Reproduces
cc poc_06.c
mkdir test
mount -t f2fs tmp.img test
cp a.out test
cd test
sudo ./a.out
sync
- Messages
kernel BUG at fs/f2fs/node.c:1183!
RIP: 0010:f2fs_remove_inode_page+0x294/0x2d0
Call Trace:
f2fs_evict_inode+0x2a3/0x3a0
evict+0xba/0x180
__dentry_kill+0xbe/0x160
dentry_kill+0x46/0x180
dput+0xbb/0x100
do_renameat2+0x3c9/0x550
__x64_sys_rename+0x17/0x20
do_syscall_64+0x43/0xf0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
The reason is f2fs_remove_inode_page() will trigger kernel panic due to
inconsistent i_blocks value of inode.
To avoid panic, let's just print debug message and set SBI_NEED_FSCK to
give a hint to fsck for latter repairing of potential image corruption.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: fix build warning and add unlikely]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
As Jungyeon reported in bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=203217
- Overview
When mounting the attached crafted image and running program, I got this error.
Additionally, it hangs on sync after running the program.
The image is intentionally fuzzed from a normal f2fs image for testing and I enabled option CONFIG_F2FS_CHECK_FS on.
- Reproduces
cc poc_test_05.c
mkdir test
mount -t f2fs tmp.img test
sudo ./a.out
sync
- Messages
kernel BUG at fs/f2fs/inode.c:707!
RIP: 0010:f2fs_evict_inode+0x33f/0x3a0
Call Trace:
evict+0xba/0x180
f2fs_iget+0x598/0xdf0
f2fs_lookup+0x136/0x320
__lookup_slow+0x92/0x140
lookup_slow+0x30/0x50
walk_component+0x1c1/0x350
path_lookupat+0x62/0x200
filename_lookup+0xb3/0x1a0
do_readlinkat+0x56/0x110
__x64_sys_readlink+0x16/0x20
do_syscall_64+0x43/0xf0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
During inode loading, __recover_inline_status() can recovery inode status
and set inode dirty, once we failed in following process, it will fail
the check in f2fs_evict_inode, result in trigger BUG_ON().
Let's clear dirty inode in error path of f2fs_iget() to avoid panic.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Just removing '\n' in f2fs_msg(, "\n") to avoid redundant new blank line.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch changes codes as below:
- don't use is_read_io() as a condition to judge the meta IO.
- use .is_por to replace .is_meta to indicate IO is from recovery explicitly.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
As Jungyeon reported in bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=203213
- Overview
When mounting the attached crafted image and running program, I got this error.
Additionally, it hangs on sync after running the this script.
The image is intentionally fuzzed from a normal f2fs image for testing and I enabled option CONFIG_F2FS_CHECK_FS on.
- Reproduces
mkdir test
mount -t f2fs tmp.img test
cp a.out test
cd test
sudo ./a.out
sync
kernel BUG at fs/f2fs/f2fs.h:2012!
RIP: 0010:truncate_node+0x2c9/0x2e0
Call Trace:
f2fs_truncate_xattr_node+0xa1/0x130
f2fs_remove_inode_page+0x82/0x2d0
f2fs_evict_inode+0x2a3/0x3a0
evict+0xba/0x180
__dentry_kill+0xbe/0x160
dentry_kill+0x46/0x180
dput+0xbb/0x100
do_renameat2+0x3c9/0x550
__x64_sys_rename+0x17/0x20
do_syscall_64+0x43/0xf0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
The reason is dec_valid_node_count() will trigger kernel panic due to
inconsistent count in between inode.i_blocks and actual block.
To avoid panic, let's just print debug message and set SBI_NEED_FSCK to
give a hint to fsck for latter repairing.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: fix build warning and add unlikely]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
As Jungyeon reported in bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=203209
- Overview
When mounting the attached crafted image and running program, I got this error.
Additionally, it hangs on sync after the this script.
The image is intentionally fuzzed from a normal f2fs image for testing and I enabled option CONFIG_F2FS_CHECK_FS on.
- Reproduces
cc poc_01.c
./run.sh f2fs
sync
kernel BUG at fs/f2fs/f2fs.h:1788!
RIP: 0010:f2fs_truncate_data_blocks_range+0x342/0x350
Call Trace:
f2fs_truncate_blocks+0x36d/0x3c0
f2fs_truncate+0x88/0x110
f2fs_setattr+0x3e1/0x460
notify_change+0x2da/0x400
do_truncate+0x6d/0xb0
do_sys_ftruncate+0xf1/0x160
do_syscall_64+0x43/0xf0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
The reason is dec_valid_block_count() will trigger kernel panic due to
inconsistent count in between inode.i_blocks and actual block.
To avoid panic, let's just print debug message and set SBI_NEED_FSCK to
give a hint to fsck for latter repairing.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: fix build warning and add unlikely]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
With below mkfs and mount option:
MKFS_OPTIONS -- -O extra_attr -O project_quota -O inode_checksum -O flexible_inline_xattr -O inode_crtime -f
MOUNT_OPTIONS -- -o noinline_xattr
We may miss xattr data with below testcase:
- mkdir dir
- setfattr -n "user.name" -v 0 dir
- for ((i = 0; i < 190; i++)) do touch dir/$i; done
- umount
- mount
- getfattr -n "user.name" dir
user.name: No such attribute
The root cause is that we persist xattr data into reserved inline xattr
space, even if inline_xattr is not enable in inline directory inode, after
inline dentry conversion, reserved space no longer exists, so that xattr
data missed.
Let's use inline xattr space only if inline_xattr flag is set on inode
to fix this iusse.
Fixes: 6afc662e68 ("f2fs: support flexible inline xattr size")
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
With below mkfs and mount option, generic/339 of fstest will report that
scratch image becomes corrupted.
MKFS_OPTIONS -- -O extra_attr -O project_quota -O inode_checksum -O flexible_inline_xattr -O inode_crtime -f /dev/zram1
MOUNT_OPTIONS -- -o acl,user_xattr -o discard,noinline_xattr /dev/zram1 /mnt/scratch_f2fs
[ASSERT] (f2fs_check_dirent_position:1315) --> Wrong position of dirent pino:1970, name: (...)
level:8, dir_level:0, pgofs:951, correct range:[900, 901]
In old kernel, inline data and directory always reserved 200 bytes in
inode layout, even if inline_xattr is disabled, then new kernel tries
to retrieve that space for non-inline xattr inode, but for inline dentry,
its layout size should be fixed, so we just keep that reserved space.
But the problem here is that, after inline dentry conversion, inline
dentry layout no longer exists, if we still reserve inline xattr space,
after dents updates, there will be a hole in inline xattr space, which
can break hierarchy hash directory structure.
This patch fixes this issue by retrieving inline xattr space after
inline dentry conversion.
Fixes: 6afc662e68 ("f2fs: support flexible inline xattr size")
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
There are some places in where we missed to unlock page or unlock page
incorrectly, fix them.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
As Jungyeon reported in bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=203211
- Overview
When mounting the attached crafted image and making a new file, I got this error and the error messages keep repeating.
The image is intentionally fuzzed from a normal f2fs image for testing and I run with option CONFIG_F2FS_CHECK_FS on.
- Reproduces
mkdir test
mount -t f2fs tmp.img test
cd test
touch t
- Messages
[ 58.820451] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.821485] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.822530] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.823571] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.824616] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.825640] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.826663] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.827698] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.828719] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.829759] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.830783] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.831828] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.832869] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.833888] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.834945] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.835996] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.837028] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.838051] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.839072] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.840100] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.841147] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.842186] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.843214] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.844267] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.845282] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.846305] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.847341] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
... (repeating)
During GC, if segment type stored in SSA and SIT is inconsistent, we just
skip migrating current segment directly, since we need to know the exact
type to decide the migration function we use.
So in foreground GC, we will easily run into a infinite loop as we may
select the same victim segment which has inconsistent type due to greedy
policy. In order to end up this, we choose to shutdown filesystem. For
backgrond GC, we need to do that as well, so that we can avoid latter
potential infinite looped foreground GC.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Commit af033b2aa8 ("f2fs: guarantee journalled quota data by checkpoint")
added function is_journalled_quota() in f2fs.h, but it located outside of
_LINUX_F2FS_H macro coverage, it has been fixed with commit 0af725fcb7
("f2fs: fix wrong #endif").
But anyway, in order to avoid making same mistake latter, let's add single
line comment to notice which #if the last #endif is corresponding to.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: Remove unnecessary empty EOL]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
As Hagbard Celine reported:
Hi, this is a long standing bug that I've hit before on older kernels,
but I was not able to get the syslog saved because of the nature of
the bug. This time I had booted form a pen-drive, and was able to save
the log to it's efi-partition.
What i did to trigger it was to create a partition and format it f2fs,
then mount it with options:
"rw,relatime,lazytime,background_gc=on,disable_ext_identify,discard,heap,user_xattr,inline_xattr,acl,inline_data,inline_dentry,flush_merge,data_flush,extent_cache,mode=adaptive,active_logs=6,whint_mode=fs-based,alloc_mode=default,fsync_mode=strict".
Then I unpacked a big .tar.xz to the partition (I used a
gentoo-stage3-tarball as I was in process of installing Gentoo).
Same options just without data_flush gives no problems.
Mar 20 20:54:01 usbgentoo kernel: FAT-fs (nvme0n1p4): Volume was not
properly unmounted. Some data may be corrupt. Please run fsck.
Mar 20 21:05:23 usbgentoo kernel: kworker/dying (1588) used greatest
stack depth: 12064 bytes left
Mar 20 21:06:40 usbgentoo kernel: BUG: stack guard page was hit at
00000000a4b0733c (stack is 0000000056016422..0000000096e7463f)
Mar 20 21:06:40 usbgentoo kernel: kernel stack overflow
......
Mar 20 21:06:40 usbgentoo kernel: Call Trace:
Mar 20 21:06:40 usbgentoo kernel: read_node_page+0x71/0xf0
Mar 20 21:06:40 usbgentoo kernel: ? xas_load+0x8/0x50
Mar 20 21:06:40 usbgentoo kernel: __get_node_page+0x73/0x2a0
Mar 20 21:06:40 usbgentoo kernel: f2fs_get_dnode_of_data+0x34e/0x580
Mar 20 21:06:40 usbgentoo kernel: f2fs_write_inline_data+0x5e/0x2a0
Mar 20 21:06:40 usbgentoo kernel: __write_data_page+0x421/0x690
Mar 20 21:06:40 usbgentoo kernel: f2fs_write_cache_pages+0x1cf/0x460
Mar 20 21:06:40 usbgentoo kernel: f2fs_write_data_pages+0x2b3/0x2e0
Mar 20 21:06:40 usbgentoo kernel: ? f2fs_inode_chksum_verify+0x1d/0xc0
Mar 20 21:06:40 usbgentoo kernel: ? read_node_page+0x71/0xf0
Mar 20 21:06:40 usbgentoo kernel: do_writepages+0x3c/0xd0
Mar 20 21:06:40 usbgentoo kernel: __filemap_fdatawrite_range+0x7c/0xb0
Mar 20 21:06:40 usbgentoo kernel: f2fs_sync_dirty_inodes+0xf2/0x200
Mar 20 21:06:40 usbgentoo kernel: f2fs_balance_fs_bg+0x2a3/0x2c0
Mar 20 21:06:40 usbgentoo kernel: ? f2fs_inode_dirtied+0x21/0xc0
Mar 20 21:06:40 usbgentoo kernel: f2fs_balance_fs+0xd6/0x2b0
Mar 20 21:06:40 usbgentoo kernel: __write_data_page+0x4fb/0x690
......
Mar 20 21:06:40 usbgentoo kernel: __writeback_single_inode+0x2a1/0x340
Mar 20 21:06:40 usbgentoo kernel: ? soft_cursor+0x1b4/0x220
Mar 20 21:06:40 usbgentoo kernel: writeback_sb_inodes+0x1d5/0x3e0
Mar 20 21:06:40 usbgentoo kernel: __writeback_inodes_wb+0x58/0xa0
Mar 20 21:06:40 usbgentoo kernel: wb_writeback+0x250/0x2e0
Mar 20 21:06:40 usbgentoo kernel: ? 0xffffffff8c000000
Mar 20 21:06:40 usbgentoo kernel: ? cpumask_next+0x16/0x20
Mar 20 21:06:40 usbgentoo kernel: wb_workfn+0x2f6/0x3b0
Mar 20 21:06:40 usbgentoo kernel: ? __switch_to_asm+0x40/0x70
Mar 20 21:06:40 usbgentoo kernel: process_one_work+0x1f5/0x3f0
Mar 20 21:06:40 usbgentoo kernel: worker_thread+0x28/0x3c0
Mar 20 21:06:40 usbgentoo kernel: ? rescuer_thread+0x330/0x330
Mar 20 21:06:40 usbgentoo kernel: kthread+0x10e/0x130
Mar 20 21:06:40 usbgentoo kernel: ? kthread_create_on_node+0x60/0x60
Mar 20 21:06:40 usbgentoo kernel: ret_from_fork+0x35/0x40
The root cause is that we run into an infinite recursive calling in
between f2fs_balance_fs_bg and writepage() as described below:
- f2fs_write_data_pages --- A
- __write_data_page
- f2fs_balance_fs
- f2fs_balance_fs_bg --- B
- f2fs_sync_dirty_inodes
- filemap_fdatawrite
- f2fs_write_data_pages --- A
...
- f2fs_balance_fs_bg --- B
...
In order to fix this issue, let's detect such condition in __write_data_page()
and just skip calling f2fs_balance_fs() recursively.
Reported-by: Hagbard Celine <hagbardcelin@gmail.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
f2fs_hw_support_discard() only tests if the super block device supports
discard. However, for a multi-device volume, not all disks used may
support discard. Improve the check performed to test all devices of
the volume and report discard as supported if at least one device of
the volume supports discard. To implement this, introduce the helper
function f2fs_bdev_support_discard(), which returns true for zoned block
devices (where discard is processed as a zone reset) and for regular
disks supporting the discard command.
f2fs_bdev_support_discard() is also used in __queue_discard_cmd() to
handle discard command issuing for a particular device of the volume.
That is, prevent issuing a discard command for block devices that do
not support it.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
For zoned block devices, an array of zone types for each device is
allocated and initialized in order to determine if a section is stored
on a sequential zone (zone reset needed) or a conventional zone (no
zone reset needed and regular discard applies). Considering this usage,
the zone types stored in memory can be replaced with a bitmap to
indicate an equivalent information, that is, if a zone is sequential or
not. This reduces the memory usage for each zoned device by roughly 8:
on a 14TB disk with zones of 256 MB, the zone type array consumes
13x4KB pages while the bitmap uses only 2x4KB pages.
This patch changes the f2fs_dev_info structure blkz_type field to the
bitmap blkz_seq. Access to this bitmap is done using the helper
function f2fs_blkz_is_seq(), which is a rewrite of the function
get_blkz_type().
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
For a single device mount using a zoned block device, the zone
information for the device is stored in the sbi->devs single entry
array and sbi->s_ndevs is set to 1. This differs from a single device
mount using a regular block device which does not allocate sbi->devs
and sets sbi->s_ndevs to 0.
However, sbi->s_devs == 0 condition is used throughout the code to
differentiate a single device mount from a multi-device mount where
sbi->s_ndevs is always larger than 1. This results in problems with
single zoned block device volumes as these are treated as multi-device
mounts but do not have the start_blk and end_blk information set. One
of the problem observed is skipping of zone discard issuing resulting in
write commands being issued to full zones or unaligned to a zone write
pointer.
Fix this problem by simply treating the cases sbi->s_ndevs == 0 (single
regular block device mount) and sbi->s_ndevs == 1 (single zoned block
device mount) in the same manner. This is done by introducing the
helper function f2fs_is_multi_device() and using this helper in place
of direct tests of sbi->s_ndevs value, improving code readability.
Fixes: 7bb3a371d1 ("f2fs: Fix zoned block device support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Pull HID fixes from Jiri Kosina:
- build dependency fix for hid-asus from Arnd Bergmann
- addition of omitted mapping of _ASSISTANT key from Dmitry Torokhov
- race condition fix in hid-debug inftastructure from He, Bo
- fixed support for devices with big maximum report size from Kai-Heng
Feng
- deadlock fix in hid-steam from Rodrigo Rivas Costa
- quite a few device-specific quirks
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: input: add mapping for Assistant key
HID: i2c-hid: Disable runtime PM on Synaptics touchpad
HID: quirks: Fix keyboard + touchpad on Lenovo Miix 630
HID: logitech: Handle 0 scroll events for the m560
HID: debug: fix race condition with between rdesc_show() and device removal
HID: logitech: check the return value of create_singlethread_workqueue
HID: Increase maximum report size allowed by hid_field_extract()
HID: steam: fix deadlock with input devices.
HID: uclogic: remove redudant duplicated null check on ver_ptr
HID: quirks: Drop misused kernel-doc annotation
HID: hid-asus: select CONFIG_POWER_SUPPLY
HID: quirks: use correct format chars in dbg_hid
According to HUTRR89 usage 0x1cb from the consumer page was assigned to
allow launching desktop-aware assistant application, so let's add the
mapping.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
-----BEGIN PGP SIGNATURE-----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=N+5Y
-----END PGP SIGNATURE-----
Merge tag 'pidfd-fixes-v5.1-rc3' of gitolite.kernel.org:pub/scm/linux/kernel/git/brauner/linux
Pull pidfd fix from Christian Brauner:
"This should be an uncontroversial fix for pidfd_send_signal() by Jann
to better align it's behavior with other signal sending functions:
In one of the early versions of the patchset it was suggested to not
unconditionally error out when a signal with SI_USER is sent to a
non-current task (cf. [1]).
Instead, pidfd_send_signal() currently silently changes this to a
regular kill signal. While this is technically fine, the semantics are
weird since the kernel just silently converts a user's request behind
their back and also no other signal sending function allows to do
this. It gets more hairy when we introduce sending signals to a
specific thread soon.
So let's align pidfd_send_signal() with all the other signal sending
functions and error out when SI_USER signals are sent to a non-current
task"
* tag 'pidfd-fixes-v5.1-rc3' of gitolite.kernel.org:pub/scm/linux/kernel/git/brauner/linux:
signal: don't silently convert SI_USER signals to non-current pidfd
The @linaro version won't be valid much longer.
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The current sys_pidfd_send_signal() silently turns signals with explicit
SI_USER context that are sent to non-current tasks into signals with
kernel-generated siginfo.
This is unlike do_rt_sigqueueinfo(), which returns -EPERM in this case.
If a user actually wants to send a signal with kernel-provided siginfo,
they can do that with pidfd_send_signal(pidfd, sig, NULL, 0); so allowing
this case is unnecessary.
Instead of silently replacing the siginfo, just bail out with an error;
this is consistent with other interfaces and avoids special-casing behavior
based on security checks.
Fixes: 3eb39f4793 ("signal: add pidfd_send_signal() syscall")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Christian Brauner <christian@brauner.io>
Pull aio race fixes and cleanups from Al Viro.
The aio code had more issues with error handling and races with the aio
completing at just the right (wrong) time along with freeing the file
descriptor when another thread closes the file.
Just a couple of these commits are the actual fixes: the others are
cleanups to either make the fixes simpler, or to make the code legible
and understandable enough that we hope there's no more fundamental races
hiding.
* 'work.aio' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
aio: move sanity checks and request allocation to io_submit_one()
deal with get_reqs_available() in aio_get_req() itself
aio: move dropping ->ki_eventfd into iocb_destroy()
make aio_read()/aio_write() return int
Fix aio_poll() races
aio: store event at final iocb_put()
aio: keep io_event in aio_kiocb
aio: fold lookup_kiocb() into its sole caller
pin iocb through aio.
Pull symlink fixes from Al Viro:
"The ceph fix is already in mainline, Daniel's bpf fix is in bpf tree
(1da6c4d914 "bpf: fix use after free in bpf_evict_inode"), the rest
is in here"
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
debugfs: fix use-after-free on symlink traversal
ubifs: fix use-after-free on symlink traversal
jffs2: fix use-after-free on symlink traversal
We have a new Dell laptop which has the synaptics I2C touchpad
(06cb:7e7e) on it. After booting up the Linux, the touchpad doesn't
work, there is no interrupt when touching the touchpad, after
disable the runtime PM, everything works well.
I also tried the quirk of I2C_HID_QUIRK_DELAY_AFTER_SLEEP, it is
better after applied this quirk, there are interrupts but data it
reports is invalid.
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
symlink body shouldn't be freed without an RCU delay. Switch debugfs to
->destroy_inode() and use of call_rcu(); free both the inode and symlink
body in the callback. Similar to solution for bpf, only here it's even
more obvious that ->evict_inode() can be dropped.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
free the symlink body after the same RCU delay we have for freeing the
struct inode itself, so that traversal during RCU pathwalk wouldn't step
into freed memory.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
free the symlink body after the same RCU delay we have for freeing the
struct inode itself, so that traversal during RCU pathwalk wouldn't step
into freed memory.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
