Fix a missing end of phrase in the documentation. It describes the
ETHTOOL_A_C33_PSE_ACTUAL_PW attribute, which was not fully explained.
Also, fix grammar issues by using simple present tense instead of
present continuous.
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240912090550.743174-1-kory.maincent@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The "err" is always zero, so the following branch can never be executed:
if (err) {
ndev->stats.rx_dropped++;
kfree_skb(skb);
}
Therefore, the "if" statement can be removed.
Use "ndev->stats.rx_errors" to count "napi_build_skb()" failure
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/20240911135828.378317-1-usama.anjum@collabora.com
Signed-off-by: Qianqiang Liu <qianqiang.liu@163.com>
Link: https://patch.msgid.link/20240913014731.149739-1-qianqiang.liu@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- btusb: Add MediaTek MT7925-B22M support ID 0x13d3:0x3604
- btusb: Add Realtek RTL8852C support ID 0x0489:0xe122
- btrtl: Add the support for RTL8922A
- btusb: Add 2 USB HW IDs for MT7925 (0xe118/e)
- btnxpuart: Add support for ISO packets
- btusb: Add Mediatek MT7925 support ID 0x13d3:0x3608
- btsdio: Do not bind to non-removable CYW4373
- hci_uart: Add support for Amlogic HCI UART
-----BEGIN PGP SIGNATURE-----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=ZAan
-----END PGP SIGNATURE-----
Merge tag 'for-net-next-2024-09-12' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Luiz Augusto von Dentz says:
====================
bluetooth-next pull request for net-next:
- btusb: Add MediaTek MT7925-B22M support ID 0x13d3:0x3604
- btusb: Add Realtek RTL8852C support ID 0x0489:0xe122
- btrtl: Add the support for RTL8922A
- btusb: Add 2 USB HW IDs for MT7925 (0xe118/e)
- btnxpuart: Add support for ISO packets
- btusb: Add Mediatek MT7925 support ID 0x13d3:0x3608
- btsdio: Do not bind to non-removable CYW4373
- hci_uart: Add support for Amlogic HCI UART
* tag 'for-net-next-2024-09-12' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (27 commits)
Bluetooth: btintel_pcie: Allocate memory for driver private data
Bluetooth: btusb: Fix not handling ZPL/short-transfer
Bluetooth: btusb: Add 2 USB HW IDs for MT7925 (0xe118/e)
Bluetooth: btsdio: Do not bind to non-removable CYW4373
Bluetooth: hci_sync: Ignore errors from HCI_OP_REMOTE_NAME_REQ_CANCEL
Bluetooth: CMTP: Mark BT_CMTP as DEPRECATED
Bluetooth: replace deprecated strncpy with strscpy_pad
Bluetooth: hci_core: Fix sending MGMT_EV_CONNECT_FAILED
Bluetooth: btrtl: Set msft ext address filter quirk for RTL8852B
Bluetooth: Use led_set_brightness() in LED trigger activate() callback
Bluetooth: btrtl: Use kvmemdup to simplify the code
Bluetooth: btusb: Add Mediatek MT7925 support ID 0x13d3:0x3608
Bluetooth: btrtl: Add the support for RTL8922A
Bluetooth: hci_ldisc: Use speed set by btattach as oper_speed
Bluetooth: hci_conn: Remove redundant memset after kzalloc
Bluetooth: L2CAP: Remove unused declarations
dt-bindings: bluetooth: bring the HW description closer to reality for wcn6855
Bluetooth: btnxpuart: Add support for ISO packets
Bluetooth: hci_h4: Add support for ISO packets in h4_recv.h
Bluetooth: btusb: Add Realtek RTL8852C support ID 0x0489:0xe122
...
====================
Link: https://patch.msgid.link/20240912214317.3054060-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When CONFIG_TRACEPOINTS=y but CONFIG_PAGE_POOL=n, we end up with this
build failure that is reported by the 0-day bot:
ld: vmlinux.o: in function `mp_dmabuf_devmem_alloc_netmems':
>> (.text+0xc37286): undefined reference to `__tracepoint_page_pool_state_hold'
>> ld: (.text+0xc3729a): undefined reference to `__SCT__tp_func_page_pool_state_hold'
>> ld: vmlinux.o:(__jump_table+0x10c48): undefined reference to `__tracepoint_page_pool_state_hold'
>> ld: vmlinux.o:(.static_call_sites+0xb824): undefined reference to `__SCK__tp_func_page_pool_state_hold'
The root cause is that in this configuration, traces are enabled but the
page_pool specific trace_page_pool_state_hold is not registered.
There is no reason to build the dmabuf memory provider when
CONFIG_PAGE_POOL is not present, as it's really a provider to the
page_pool.
In fact the whole NET_DEVMEM is RX path-only at the moment, so we can
make the entire config dependent on the PAGE_POOL.
Note that this may need to be revisited after/while devmem TX is
added, as devmem TX likely does not need CONFIG_PAGE_POOL. For now this
build fix is sufficient.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202409131239.ysHQh4Tv-lkp@intel.com/
Signed-off-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org> # build-tested
Link: https://patch.msgid.link/20240913060746.2574191-1-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Roger Quadros says:
====================
net: ethernet: ti: am65-cpsw: Add multi queue RX support
am65-cpsw can support up to 8 queues at Rx. So far we have
been using only one queue (i.e. default flow) for all RX traffic.
This series adds multi-queue support. The driver starts with
1 RX queue by default. User can increase the RX queues via ethtool,
e.g. 'ethtool -L ethx rx <N>'
The series also adds regmap and regfield support to some of the
ALE registers. It adds Policer/Classifier registers and fields.
Converting the existing ALE control APIs to regfields can be a separate
exercise.
Some helper functions are added to read/write to the Policer/Classifier
registers and a default Classifier setup function is added that
routes packets based on their PCP/DSCP priority to different RX queues.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
---
Changes in v4:
- Use single macro AM65_CPSW_MAX_QUEUES for both TX and RX queues
to simplify code
- reuse am65_cpsw_get/set_per_queue_coalesce for am65_cpsw_get/set_coalesce.
- return -EINVAL if unsupported tx/rx_coalesce_usecs in
am65_cpsw_set_coalesce.
- reverse Xmas tree declaration order fixes in cpsw_ale
- Link to v3: https://lore.kernel.org/r/20240703-am65-cpsw-multi-rx-v3-0-f11cd860fd72@kernel.org
Changes in v3:
- code style fixes
- squashed patches 5 and 6
- added comment about priority to thread mapping table.
- Added Reviewed-by Simon Horman.
- Link to v2: https://lore.kernel.org/r/20240628-am65-cpsw-multi-rx-v2-0-c399cb77db56@kernel.org
Changes in v2:
- rebase to net/next
- fixed RX stall issue during iperf
- Link to v1: https://lore.kernel.org/r/20240606-am65-cpsw-multi-rx-v1-0-0704b0cb6fdc@kernel.org
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that we support multiple RX queues, enable default priority
to flow mapping so that higher priority packets come on higher
channels (flows).
The Classifier checks for PCP/DSCP priority in the packet and
routes them to the appropriate flow.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The Policer registers in the ALE register space are just shadow registers
and use an index field in the policer table control register to read/write
to the actual Polier registers.
Add helper functions to Read and Write to Policer registers.
Also add a helper function to set the thread value to classifier/policer
mapping. Any packet that first matches the classifier will be sent to the
thread (flow) that is set in the classifier to thread mapping table.
If not set then it goes to the default flow.
Default behaviour is to have 8 classifiers to map 8 DSCP/PCP
priorities to N receive threads (flows). N depends on number of
RX channels enabled for the port.
As per the standard [1] User prioritie 1 (Background) and 2 (Spare) have
lower priority than the user priority 0 (default). User priority 1 being
of the lowest priority.
[1] IEEE802.1D-2004, IEEE Standard for Local and metropolitan area networks
Table G-2 - Traffic type acronyms
Table G-3 - Defining traffic types
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Adds regfileds for Policer registers and Thread mapping/control registers.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use regfields for number of ALE Entries and Policers.
The variants that support Policers/Classifiers have the number
of policers encoded in the ALE_STATUS register.
Use that and show the number of Policers in the ALE info message.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Map the entire ALE registerspace using regmap.
Add regfields for Major and Minor Version fields.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
am65-cpsw can support up to 8 queues at Rx.
Use a macro AM65_CPSW_MAX_RX_QUEUES to indicate that.
As there is only one DMA channel for RX traffic, the
8 queues come as 8 flows in that channel.
By default, we will start with 1 flow as defined by the
macro AM65_CPSW_DEFAULT_RX_CHN_FLOWS.
User can change the number of flows by ethtool like so
'ethtool -L ethx rx <N>'
All traffic will still come on flow 0. To get traffic on
different flows the Classifiers will need to be set up.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
When CONFIG_SYSFS is not set, the kernel fails to compile:
net/core/page_pool_user.c:368:45: error: implicit declaration of function 'get_netdev_rx_queue_index' [-Werror=implicit-function-declaration]
368 | if (pool->slow.queue_idx == get_netdev_rx_queue_index(rxq)) {
| ^~~~~~~~~~~~~~~~~~~~~~~~~
When CONFIG_SYSFS is not set, get_netdev_rx_queue_index() is not defined
as well.
Fix by removing the ifdef around get_netdev_rx_queue_index(). It is not
needed anymore after commit e817f85652 ("xdp: generic XDP handling of
xdp_rxq_info") removed most of the CONFIG_SYSFS ifdefs.
Fixes: 0f92140468 ("memory-provider: dmabuf devmem memory provider")
Cc: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20240913032824.2117095-1-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Saeed Mahameed says:
====================
Misc updates to mlx5 driver:
1) Fix HW steering ret value and align with kdoc
2) Flow steering cleanups and add support for no append at software level
3) Support for sync reset using hot reset
4) RX SW counter to cover no-split events in header/data split mode
5) Make affinity of SFs configurable
====================
Link: https://patch.msgid.link/20240911201757.1505453-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mlx5e_free_rq previously cleaned resources in an order that was not the
reverse of the resource allocation order in mlx5e_alloc_rq.
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20240911201757.1505453-16-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When SHAMPO can't identify the protocol/header of a packet, it will
yield a packet that is not split - all the packet is in the data part.
Count this value in packets and bytes.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20240911201757.1505453-15-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a new command status MLX5_CMD_STAT_NOT_READY to handle cases
where the firmware is not ready.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/20240911201757.1505453-14-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
SFs didn't allow to configure IRQ affinity for its vectors. Allow users
to configure the affinity of the SFs irqs.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/20240911201757.1505453-13-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sync reset request is nacked by the driver when PCIe bridge connected to
mlx5 device has HotPlug interrupt enabled. However, when using reset
method of hot reset this check can be skipped as Hotplug is supported on
this reset method.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20240911201757.1505453-12-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On device that supports sync reset for firmware activate using hot
reset, the driver queries the required reset method while handling the
sync reset request. If the required reset method is hot reset, the
driver will use pci_reset_bus() to reset the PCI link instead of the
link toggle.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20240911201757.1505453-11-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
New devices with new FW can support sync reset for firmware activate
using hot reset. Add capability for supporting it and add MFRL field to
query from FW which type of PCI reset method to use while handling sync
reset events.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20240911201757.1505453-10-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Native capability for some steering engines lacks support for adding an
additional match with the same value to the same flow group. To accommodate
the NO APPEND flag in these scenarios, we include the new rule in the
existing flow table entry (fte) without immediate hardware commitment. When
a request is made to delete the corresponding hardware rule, we then commit
the pending rule to hardware.
Only one pending rule is supported because NO_APPEND is primarily used
during replacement operations. In this scenario, a rule is initially added.
When it needs replacement, the new rule is added with NO_APPEND set. Only
after the insertion of the new rule is the original rule deleted.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20240911201757.1505453-9-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce a dedicated structure to encapsulate flow context, actions,
destination count, and modification mask. This refactoring lays the
groundwork for forthcoming patches that will integrate the NO APPEND
software logic. Future modifications should focus solely on these
specific fields.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20240911201757.1505453-8-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Counter is in struct fte, remove it.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20240911201757.1505453-7-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Downstream patches will need this as we might not want to reset
it when a pending rule is connected to the FTE.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20240911201757.1505453-6-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As preparation for HW Steering support, where the function
get_root_namespace() is needed to get root FDB, make it an API function
and rename it to mlx5_get_root_namespace().
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/20240911201757.1505453-5-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As preparation for HW steering support in fs core level, move SW
steering helper function that can be reused by HW steering to fs_cmd.h.
The function mlx5_fs_cmd_is_fw_term_table() checks if a flow table is a
flow steering termination table and so should be handled by FW steering.
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20240911201757.1505453-4-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fixed all the '-ret' returns in error flow of functions to 'ret',
as the internal functions are already returning negative error values
(e.g. -EINVAL)
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20240911201757.1505453-3-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Changed all the functions comments to adhere with kernel-doc formatting.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20240911201757.1505453-2-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jinjie Ruan says:
====================
net: Use IRQF_NO_AUTOEN flag in request_irq()
As commit cbe16f35be ("genirq: Add IRQF_NO_AUTOEN for request_irq/nmi()")
said, reqeust_irq() and then disable_irq() is unsafe.
IRQF_NO_AUTOEN flag can be used by drivers to request_irq(). It prevents
the automatic enabling of the requested interrupt in the same safe way.
With that the usage can be simplified and corrected.
====================
Link: https://patch.msgid.link/20240911094445.1922476-1-ruanjinjie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
disable_irq() after request_irq() still has a time gap in which
interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will
disable IRQ auto-enable when request IRQ.
Reviewed-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patch.msgid.link/20240911094445.1922476-4-ruanjinjie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
disable_irq() after request_irq() still has a time gap in which
interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will
disable IRQ auto-enable when request IRQ.
Fixes: bbb96dc7fa ("enetc: Factor out the traffic start/stop procedures")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patch.msgid.link/20240911094445.1922476-3-ruanjinjie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
disable_irq() after request_irq() still has a time gap in which
interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will
disable IRQ auto-enable when request IRQ.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patch.msgid.link/20240911094445.1922476-2-ruanjinjie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZuH9UQAKCRDbK58LschI
g0/zAP99WOcCBp1M/jSTUOba230+eiol7l5RirDEA6wu7TqY2QEAuvMG0KfCCpTI
I0WqStrK1QMbhwKPodJC1k+17jArKgw=
=jfMU
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-09-11
We've added 12 non-merge commits during the last 16 day(s) which contain
a total of 20 files changed, 228 insertions(+), 30 deletions(-).
There's a minor merge conflict in drivers/net/netkit.c:
00d066a4d4 ("netdev_features: convert NETIF_F_LLTX to dev->lltx")
d966087948 ("netkit: Disable netpoll support")
The main changes are:
1) Enable bpf_dynptr_from_skb for tp_btf such that this can be used
to easily parse skbs in BPF programs attached to tracepoints,
from Philo Lu.
2) Add a cond_resched() point in BPF's sock_hash_free() as there have
been several syzbot soft lockup reports recently, from Eric Dumazet.
3) Fix xsk_buff_can_alloc() to account for queue_empty_descs which
got noticed when zero copy ice driver started to use it,
from Maciej Fijalkowski.
4) Move the xdp:xdp_cpumap_kthread tracepoint before cpumap pushes skbs
up via netif_receive_skb_list() to better measure latencies,
from Daniel Xu.
5) Follow-up to disable netpoll support from netkit, from Daniel Borkmann.
6) Improve xsk selftests to not assume a fixed MAX_SKB_FRAGS of 17 but
instead gather the actual value via /proc/sys/net/core/max_skb_frags,
also from Maciej Fijalkowski.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
sock_map: Add a cond_resched() in sock_hash_free()
selftests/bpf: Expand skb dynptr selftests for tp_btf
bpf: Allow bpf_dynptr_from_skb() for tp_btf
tcp: Use skb__nullable in trace_tcp_send_reset
selftests/bpf: Add test for __nullable suffix in tp_btf
bpf: Support __nullable argument suffix for tp_btf
bpf, cpumap: Move xdp:xdp_cpumap_kthread tracepoint before rcv
selftests/xsk: Read current MAX_SKB_FRAGS from sysctl knob
xsk: Bump xsk_queue::queue_empty_descs in xp_can_alloc()
tcp_bpf: Remove an unused parameter for bpf_tcp_ingress()
bpf, sockmap: Correct spelling skmsg.c
netkit: Disable netpoll support
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
Link: https://patch.msgid.link/20240911211525.13834-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Willem de Bruijn says:
====================
selftests/net: packetdrill: netns and two imports
From: Willem de Bruijn <willemb@google.com>
1/3: run in nets, as discussed, and add missing CONFIGs
2/3: import tcp/zerocopy
3/3: import tcp/slow_start
====================
Link: https://patch.msgid.link/20240912005317.1253001-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Same import process as previous tests.
Also add CONFIG_NET_SCH_FQ to config, as one test uses that.
Same test process as previous tests. Both with and without debug mode.
Recording the steps once:
make mrproper
vng --build \
--config tools/testing/selftests/net/packetdrill/config \
--config kernel/configs/debug.config
vng -v --run . --user root --cpus 4 -- \
make -C tools/testing/selftests TARGETS=net/packetdrill run_tests
Link: https://github.com/linux-netdev/nipa/wiki/How-to-run-netdev-selftests-CI-style#how-to-build
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240912005317.1253001-4-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Same as initial tests, import verbatim from
github.com/google/packetdrill, aside from:
- update `source ./defaults.sh` path to adjust for flat dir
- add SPDX headers
- remove author statements if any
- drop blank lines at EOF (new)
Also import set_sysctls.py, which many scripts depend on to set
sysctls and then restore them later. This is no longer strictly needed
for namespacified sysctl. But not all sysctls are namespacified, and
doesn't hurt if they are.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240912005317.1253001-3-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
David Arinzon says:
====================
ENA driver metrics changes
This patchset contains an introduction of new metrics
available to ENA users.
====================
Link: https://patch.msgid.link/20240909084704.13856-1-darinzon@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ENA currently supports the following customer metrics:
- `bw_in_allowance_exceeded`
- `bw_out_allowance_exceeded`
- `conntrack_allowance_exceeded`
- `linklocal_allowance_exceeded`
- `pps_allowance_exceeded`
This patch adds a new metric named:
`conntrack_allowance_available`.
Information about these metrics is available in [1].
In addition, the interface between the driver and the
device has been upgraded to allow more flexibility and
expendability to additional metrics in the future.
[1]: https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/monitoring-network-performance-ena.html#network-performance-metrics
Signed-off-by: Ron Beider <rbeider@amazon.com>
Signed-off-by: Shahar Itzko <itzko@amazon.com>
Signed-off-by: David Arinzon <darinzon@amazon.com>
Link: https://patch.msgid.link/20240909084704.13856-3-darinzon@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ENA Express metrics, called `ena_srd` are exposed to
customers via `ethtool`.
The metrics allow customers to check the configuration
(mode), tx/rx counters as well as resource utilization.
The documentation is also updated to provide a general
explanation about ENA Express as well as links for further
information about metrics and configurations.
Signed-off-by: Igor Chauskin <igorch@amazon.com>
Signed-off-by: David Arinzon <darinzon@amazon.com>
Link: https://patch.msgid.link/20240909084704.13856-2-darinzon@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR.
No conflicts (sort of) and no adjacent changes.
This merge reverts commit b3c9e65eb2 ("net: hsr: remove seqnr_lock")
from net, as it was superseded by
commit 430d67bdcb ("net: hsr: Use the seqnr lock for frames received via interlink port.")
in net-next.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix driver not allocating memory for struct btintel_data which is used
to store internal data.
Fixes: 6e65a09f92 ("Bluetooth: btintel_pcie: Add *setup* function to download firmware")
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
*think* such fix will not land in the next week.
Including fixes from netfilter.
Current release - regressions:
- core: tighten bad gso csum offset check in virtio_net_hdr
- netfilter: move nf flowtable bpf initialization in nf_flow_table_module_init()
- eth: ice: stop calling pci_disable_device() as we use pcim
- eth: fou: fix null-ptr-deref in GRO.
Current release - new code bugs:
- hsr: prevent NULL pointer dereference in hsr_proxy_announce()
Previous releases - regressions:
- hsr: remove seqnr_lock
- netfilter: nft_socket: fix sk refcount leaks
- mptcp: pm: fix uaf in __timer_delete_sync
- phy: dp83822: fix NULL pointer dereference on DP83825 devices
- eth: revert "virtio_net: rx enable premapped mode by default"
- eth: octeontx2-af: Modify SMQ flush sequence to drop packets
Previous releases - always broken:
- eth: mlx5: fix bridge mode operations when there are no VFs
- eth: igb: Always call igb_xdp_ring_update_tail() under Tx lock
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=tbcX
-----END PGP SIGNATURE-----
Merge tag 'net-6.11-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter.
There is a recently notified BT regression with no fix yet. I do not
think a fix will land in the next week.
Current release - regressions:
- core: tighten bad gso csum offset check in virtio_net_hdr
- netfilter: move nf flowtable bpf initialization in
nf_flow_table_module_init()
- eth: ice: stop calling pci_disable_device() as we use pcim
- eth: fou: fix null-ptr-deref in GRO.
Current release - new code bugs:
- hsr: prevent NULL pointer dereference in hsr_proxy_announce()
Previous releases - regressions:
- hsr: remove seqnr_lock
- netfilter: nft_socket: fix sk refcount leaks
- mptcp: pm: fix uaf in __timer_delete_sync
- phy: dp83822: fix NULL pointer dereference on DP83825 devices
- eth: revert "virtio_net: rx enable premapped mode by default"
- eth: octeontx2-af: Modify SMQ flush sequence to drop packets
Previous releases - always broken:
- eth: mlx5: fix bridge mode operations when there are no VFs
- eth: igb: Always call igb_xdp_ring_update_tail() under Tx lock"
* tag 'net-6.11-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (36 commits)
net: netfilter: move nf flowtable bpf initialization in nf_flow_table_module_init()
net: tighten bad gso csum offset check in virtio_net_hdr
netlink: specs: mptcp: fix port endianness
net: dpaa: Pad packets to ETH_ZLEN
mptcp: pm: Fix uaf in __timer_delete_sync
net: libwx: fix number of Rx and Tx descriptors
net: dsa: felix: ignore pending status of TAS module when it's disabled
net: hsr: prevent NULL pointer dereference in hsr_proxy_announce()
selftests: mptcp: include net_helper.sh file
selftests: mptcp: include lib.sh file
selftests: mptcp: join: restrict fullmesh endp on 1st sf
netfilter: nft_socket: make cgroupsv2 matching work with namespaces
netfilter: nft_socket: fix sk refcount leaks
MAINTAINERS: Add ethtool pse-pd to PSE NETWORK DRIVER
dt-bindings: net: tja11xx: fix the broken binding
selftests: net: csum: Fix checksums for packets with non-zero padding
net: phy: dp83822: Fix NULL pointer dereference on DP83825 devices
virtio_net: disable premapped mode by default
Revert "virtio_net: big mode skip the unmap check"
Revert "virtio_net: rx remove premapped failover code"
...
Fixes:
- asus-wmi: Disable OOBE that interferes with backlight control
- panasonic-laptop: Two fixes to SINF array handling
The following is an automated shortlog grouped by driver:
asus-wmi:
- Disable OOBE experience on Zenbook S 16
panasonic-laptop:
- Allocate 1 entry extra in the sinf array
- Fix SINF array out of bounds accesses
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCZuKxBgAKCRBZrE9hU+XO
MZWtAP9CFIg02ZzY8ZadQMhV3CmOfojLp9S8mYN9BS91iO9eYwD/deECQ1hG+UHp
wRjs+8BA9jUtWT3iLyFcA2ZnAdZPCwA=
=rCeo
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.11-7' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
- asus-wmi: Disable OOBE that interferes with backlight control
- panasonic-laptop: Two fixes to SINF array handling
* tag 'platform-drivers-x86-v6.11-7' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: asus-wmi: Disable OOBE experience on Zenbook S 16
platform/x86: panasonic-laptop: Allocate 1 entry extra in the sinf array
platform/x86: panasonic-laptop: Fix SINF array out of bounds accesses
As Jann points out, PFN mappings are special, because unlike normal
memory mappings, there is no lifetime information associated with the
mapping - it is just a raw mapping of PFNs with no reference counting of
a 'struct page'.
That's all very much intentional, but it does mean that it's easy to
mess up the cleanup in case of errors. Yes, a failed mmap() will always
eventually clean up any partial mappings, but without any explicit
lifetime in the page table mapping itself, it's very easy to do the
error handling in the wrong order.
In particular, it's easy to mistakenly free the physical backing store
before the page tables are actually cleaned up and (temporarily) have
stale dangling PTE entries.
To make this situation less error-prone, just make sure that any partial
pfn mapping is torn down early, before any other error handling.
Reported-and-tested-by: Jann Horn <jannh@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Simona Vetter <simona.vetter@ffwll.ch>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Requesting transfers of the exact same size of wMaxPacketSize may result
in ZPL/short-transfer since the USB stack cannot handle it as we are
limiting the buffer size to be the same as wMaxPacketSize.
Also, in terms of throughput this change has the same effect to
interrupt endpoint as 290ba20081 "Bluetooth: Improve USB driver throughput
by increasing the frame size" had for the bulk endpoint, so users of the
advertisement bearer (e.g. BT Mesh) may benefit from this change.
Fixes: 5e23b923da ("[Bluetooth] Add generic driver for Bluetooth USB devices")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: Kiran K <kiran.k@intel.com>
CYW4373 devices soldered onto the PCB (non-removable),
use a UART connection for Bluetooth and the advertised btsdio
support as an SDIO function should be ignored.
Signed-off-by: Scott Ehlert <ehlert@battelle.org>
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
