Commit 69c4938249 ("drm/nouveau/instmem/gk20a: use direct CPU access")
tried to be smart while using the DMA-API by managing the CPU mappings of
buffers allocated with the DMA-API by itself. In doing so, it relied
on dma_to_phys() which is an architecture-private function not
available everywhere. This broke the build on several architectures.
Since there is no reliable and portable way to obtain the physical
address of a DMA-API buffer, stop trying to be smart and just use the
CPU mapping that the DMA-API can provide. This means that buffers will
be CPU-mapped for all their life as opposed to when we need them, but
anyway using the DMA-API here is a fallback for when no IOMMU is
available so we should not expect optimal behavior.
This makes the IOMMU and DMA-API implementations of instmem diverge
enough that we should maybe put them into separate files...
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The LRU list used for recycling CPU mappings was handling concurrency
very poorly. For instance, if an instobj was acquired twice before being
released once, it would end up into the LRU list even though there is
still a client accessing it.
This patch fixes this by properly counting how many clients are
currently using a given instobj.
While at it, we also raise errors when inconsistencies are detected, and
factorize some code.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This patch is needed by initramfs tools to detect
the required firmware files for the module.
This patch tests for either TEGRA_124_SOC or TEGRA_132_SOC
for the firmwares related to the Tegra K1 generation.
v2: move the MODULE_FIRMWARE to the nvidia_platform.c file.
This will avoid to test for NOUVEAU_PLATFORM_DRIVER
Signed-off-by: Nicolas Chauvet <kwizart@gmail.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The offset should be 8 on Kepler and later.
Signed-off-by: Vince Hsu <vinceh@nvidia.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Very rough, no idea how correct it is at this point, but it prevents
getteximage-depth from piglit from hanging the GPU.
v2: updated with NV_PCE_FE_LAUNCHERR_REPORT values provided by NVIDIA
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The CPU-side tracking of engine runlists was not protected by a lock,
leading to list corruption, eventually causing runlist_update() to
overrun the GPU-side runlist, triggering an OOPS.
Fixes some of the issues noticed during parallel piglit runs.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
We want to unlock nv_devices_mutex in this error path as well.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Some Fermi's apparently alow allow 297MHz clocks, so create a parameter
which allows end-users to set it themselves until we have a reliable way
to determine the board's maximum pixel clocks.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Without this patch a pixel clock rate above 165 MHz on a TMDS link is
assumed to be dual link. This is true for DVI, but not for HDMI. HDMI
supports no dual link, but it supports pixel clock rates above 165 MHz.
Only activate Dual Link mode when it is actually possible and requested.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
[imirkin: check for hdmi monitor for computing proto, use sor ctrl to
enable extra config bit]
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
CC [M] drivers/gpu/drm/radeon/r100.o
In file included from drivers/gpu/drm/radeon/radeon_mode.h:37:0,
from drivers/gpu/drm/radeon/radeon.h:80,
from drivers/gpu/drm/radeon/r100.c:33:
drivers/gpu/drm/radeon/r100.c: In function 'r100_bandwidth_update':
include/drm/drm_fixed.h:64:13: warning: 'crit_point_ff.full' may be used uninitialized in this function [-Wmaybe-uninitialized]
u64 tmp = ((u64)A.full << 13);
^
drivers/gpu/drm/radeon/r100.c:3153:63: note: 'crit_point_ff.full' was declared here
fixed20_12 peak_disp_bw, mem_bw, pix_clk, pix_clk2, temp_ff, crit_point_ff;
^
drivers/gpu/drm/radeon/r100.c:3583:42: warning: 'disp_drain_rate.full' may be used uninitialized in this function [-Wmaybe-uninitialized]
temp_ff.full = read_return_rate.full - disp_drain_rate.full;
gcc version 5.3.1 20151219 (Ubuntu 5.3.1-4ubuntu1)
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Check if there really is a valid offset for the BO.
v2: user WARN_ON_ONCE
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2: AGD: rebase on upstream
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In case CONFIG_DRM_AMD_POWERPLAY is defined and amdgpu.powerplay=0.
some functions in powrplay can also be called by DAL. and the input parameter is *adev.
if just check point not NULL was not enough and will lead to NULL point error.
V2: AGD: rebase on upstream
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. return -1 instead of -ENOMEM
2. The struct type mismatch warnings.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Ken Wang <Qingqing.Wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2: AGD: rebase on upstream
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Ken Wang <Qingqing.Wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
&& was used instead of ||.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Ken Wang <Qingqing.Wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We moved the module options from drm_drv.c to drm_irq.c in 1888299571
('drm: Move vblank related module options into drm_irq.c'). Let's move
the MODULE_PARM_DESC()s as well so they're together.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160108110045.GF32195@mwanda
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Add a dummy entry to CEA/HDMI mode tables so they can be indexed
directly using the VIC, avoiding a +1/-1 dance here and there. This adds
clarity to the error checking for various functions that return the VIC
on success and zero on failure; we can now explicitly check for 0
instead of just subtracting one from an unsigned type.
Also add drm_valid_cea_vic() and drm_valid_hdmi_vic() helpers for
checking valid VICs.
v2: add drm_valid_cea_vic and drm_valid_hdmi_vic helpers (Ville)
use { } instead of { 0 } for initializing the dummy modes
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1452252111-6439-1-git-send-email-jani.nikula@intel.com
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Adds a function that sets the pointer to dev_pm_domain in struct device
and that warns if the device has already finished probing. The reason
why we want to enforce that is because in the general case that can
cause problems and also that we can simplify code quite a bit if we can
always assume that.
This patch also changes all current code that directly sets the
dev.pm_domain pointer.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The hardware description macros define the mask and shifts the wrong
way around for the intended use, leading to the condition never being
true and the chip revision ending up with the wrong value.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Christian Gmeiner <christian.gmeiner@gmail.com>
drm/i915: Update connector_mask during readout, v2.
The connector_mask may be used any time during the non-atomic
.crtc_disable which is called before the full atomic state is
set up and needs to be accurate for that reason.
Changes since v1:
- Update connector_mask in readout_hw_state and add a comment.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/568D1C55.8010001@linux.intel.com
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We have to drop a lock before returning -ENOMEM here.
Fixes: a8c21a5451 ('drm/etnaviv: add initial etnaviv DRM driver')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Add support for Synopsys DesignWare MIPI DSI controller which is
embedded in the rk3288 SoCs.
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Acked-by: Mark Yao <mark.yao@rock-chips.com>
Since the mipi dsi driver need to use the clock of vop to make the
calculation of Blanking. But sometimes the clock driver can not set a
accurate clock_rate for vop, get it by clk_round_rate before mode_set,
so we can get the true value.
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Acked-by: Mark Yao <mark.yao@rock-chips.com>
drm_gem_handle_delete() contains its own version of
drm_gem_object_release_handle(), so lets just call the release method
instead.
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1451986951-3703-2-git-send-email-chris@chris-wilson.co.uk
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Good practice dictates that we do not leak stale information to our
callers, and should avoid overwriting an outparam on an error path.
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1451986951-3703-1-git-send-email-chris@chris-wilson.co.uk
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We want this for consistency with existing page_flip semantics.
Since this spurred quite a discussion on IRC also document why we
reject event generation when the pipe is off: It's not that it's hard
to implement, but userspace has a track recording which proves that it's
way too easy to accidentally abuse and cause havoc. We want to make
sure userspace doesn't get away with that.
v2: Somehow thought we do reject events already, but that code only
existed in my imagination ... Also suggestions from Thierry.
Cc: Daniel Stone <daniels@collabora.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1449564561-3896-4-git-send-email-daniel.vetter@ffwll.ch
Unlike the handle, the name table uses a sleeping mutex rather than a
spinlock. The allocation is in a normal context, and we can use the
simpler sleeping gfp_t, rather than have to take from the atomic
reserves.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1451902261-25380-3-git-send-email-chris@chris-wilson.co.uk
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We only need a single reference count for all handles (i.e. non-zero
obj->handle_count) and so can trim a few atomic operations by only
taking the reference on the first handle and dropping it after the last.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1451902261-25380-2-git-send-email-chris@chris-wilson.co.uk
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The current error path for failure when establishing a handle for a GEM
object is unbalance, e.g. we call object_close() without calling first
object_open(). Use the typical onion structure to only undo what has
been set up prior to the error.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
To be consistent with other DCE11 functions test for crtc < 0.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Mimics odd behaviour where (i++ % 100 == 0) is true in the first iteration of each loop...
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Simplified the ring test and added logic to ensure rings are marked not ready
by default.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
More LOC reductions in VCE3 code. This patch simplifies the is_idle and
wait_for_idle logic.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
The cast to uint8_t happens before the right shift so this always sets
.m3arb to zero. The cast is actually a no-op so we can remove it.
Fixes: 3bace35914 ('drm/amd/powerplay: add hardware manager sub-component')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This code is indented too far. Also we normally use spaces to align if
statement conditions.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This test was reversed so it would end up leading to a NULL dereference.
Fixes: 4630f0faae ('drm/amd/powerplay: add Carrizo smu support')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Unsigned integers can never be negative, so drop this check.
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is needed to receive correct port
number from RAD, so MSTB could be found
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Mykola Lysenko <Mykola.Lysenko@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
This fix is needed to support more then two
branch displays, so RAD address consist at
least of 2 elements
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Mykola Lysenko <Mykola.Lysenko@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
We should always send reply for UP request in order
to make downstream device clean-up resources appropriately.
Issue was that reply for UP request was sent only once.
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Mykola Lysenko <Mykola.Lysenko@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
In case broadcast message received in UP request,
RAD cannot be used to identify message originator.
Message should be parsed, originator should be found
by GUID from parsed message.
Also reply with broadcast in case broadcast message
received (for now it is always broadcast)
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Mykola Lysenko <Mykola.Lysenko@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
The newly added code for Fiji creates a correct compiler warning
about invalid use of the do_div macro:
In file included from powerplay/hwmgr/ppatomctrl.c:31:0:
drivers/gpu/drm/amd/amdgpu/../powerplay/hwmgr/ppevvmath.h: In function 'fDivide':
drivers/gpu/drm/amd/amdgpu/../powerplay/hwmgr/ppevvmath.h:382:89: warning: comparison of distinct pointer types lacks a cast
do_div(longlongX, longlongY); /*Q(32,32) divided by Q(16,16) = Q(16,16) Back to original format */
do_div() divides an unsigned 64-bit number by an unsigned 32-bit number.
The code instead wants to divide two signed 64-bit numbers, which is done
using the div64_s64 function.
Reviewed-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 770911a3cf ("drm/amd/powerplay: add/update headers for Fiji SMU and DPM")
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix indentation of vga_switcheroo sections in gpu.tmpl.
Change section type of API documentation from "chapter" to "sect1"
so that the individual functions no longer clutter up the ToC.
Group together under a new "API" chapter.
Fix wording "heretoforth" -> "henceforth".
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The drm_dp_mst_topology_cbs structures are never modified, so declare them
as const.
Done with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Pull i915 drm fixes from Jani Nikula:
"Two display fixes still for v4.4.
The new year's resolution is to start using signed tags per Linus'
request. This one is still unsigned; I want to fix this up in our
maintainer scripts instead of doing it one-off"
* tag 'drm-intel-fixes-2016-01-02' of git://anongit.freedesktop.org/drm-intel:
drm/i915: increase the tries for HDMI hotplug live status checking
drm/i915: Unbreak check_digital_port_conflicts()
omap_encoder_update() assigns an overlay manager to
dssdev->src->manager. This assignment is not needed, as the connections
in the display chain have already been made at connect step.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
omapdrm supports atomic modesetting, and it seems to work ok. So let's
set the flag to enable the atomic modesetting API support.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Remove unused defines related to SGX plugin which are not used.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Modified Tiler placement to utilize bitmaps for bookkeeping and
all placement algorithms. This resulted in a substantial savings
in time for all Tiler reservation and free operations. Typical
savings are in the range of 28% decrease in time taken with larger
buffers showing a 80%+ decrease.
Signed-off-by: Andy Gross <andy.gross@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The GEM object can't be tiled without a usergart as that condition is
checked and considered as an error when creating the GEM object.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The goto error statement end up just returning NULL without performing
any cleanup, replace it with a direct return.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The drm_gem_free_mmap_offset() call in omap_gem_free_object() is
redundant as the same function is called from drm_gem_object_release().
Remove it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Use the omap_gem_free_object() function to destroy the GEM object in the
omap_gem_new_handle() error path instead of doing it manually (and
incorrectly).
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The GEM object free handler frees memory allocated by the driver using
the pointer to the drm_gem_object instead of the pointer to the
omap_gem_object that embeds it. This doesn't cause any issue in practice
as the drm_gem_object is the first field of omap_gem_object, but would
cause memory corruption if the structure layout changes. Fix it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The 8 high order bits of the buffer flags are reserved for internal use.
Mask them out from the flags passed by userspace.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The structure contains data related to a device instance, it shouldn't
be a global variable.
While at it rename the usergart structures with an omap_drm_ prefix.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Divide the GEM implementation in groups of functions to improve
readability.
No code change is performed by this commit.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reorder functions to get rid of forward declarations
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Several DRM core function prototypes refer to functions that don't exist
anymore and are thus obviously never called. Remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Don't compile the fbdev emulation code when fbdev emulation support is
disabled.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The plane reset handler frees the plane state and allocates a new
default state, but when doing so attempt to free the plane state using
the base plane state pointer instead of casting it to the
driver-specific state object that has been allocated. Fix it by using
the omap_plane_atomic_destroy_state() function to destroy the plane
state instead of duplicating the code.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[tomi.valkeinen@ti.com: move of the func into separate patch]
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
These new helpers simplify implementing multi-driver modules and
properly handle failure to register one driver by unregistering all
previously registered drivers.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
omap_dmm_tiler.c can't be compiled as a module and it is built
unconditionally as part of omapdrm. Since it can't be used as a module,
there is no need for it to have an unused MODULE_ALIAS().
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Fixes: a67719d182 ("drm/rockchip: vop: spilt register related into rockchip_reg_vop.c")
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Mark Yao <mark.yao@rock-chips.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The total delay of HDMI hotplug detecting with 30ms is sometimes not
enoughtfor HDMI live status up with specific HDMI monitors in BSW platform.
After doing experiments for following monitors, it needs 80ms at least
for those worst cases.
Lenovo L246 1xwA (4 failed, necessary hot-plug delay: 58/40/60/40ms)
Philips HH2AP (9 failed, necessary hot-plug delay: 80/50/50/60/46/40/58/58/39ms)
BENQ ET-0035-N (6 failed, necessary hot-plug delay: 60/50/50/80/80/40ms)
DELL U2713HM (2 failed, necessary hot-plug delay: 58/59ms)
HP HP-LP2475w (5 failed, necessary hot-plug delay: 70/50/40/60/40ms)
It looks like 70-80 ms is BSW platform needs in some bad cases of the
monitors at this end (8 times delay at most). Keep less than 100ms for
HDCP pulse HPD low (with at least 100ms) to respond a plug out.
Reviewed-by: Cooper Chiou <cooper.chiou@intel.com>
Tested-by: Gary Wang <gary.c.wang@intel.com>
Cc: Gavin Hindman <gavin.hindman@intel.com>
Cc: Sonika Jindal <sonika.jindal@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Shobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: Gary Wang <gary.c.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1450858295-12804-1-git-send-email-gary.c.wang@intel.com
Tested-by: Shobhit Kumar <shobhit.kumar@intel.com>
Cc: drm-intel-fixes@lists.freedesktop.org
Fixes: 237ed86c69 ("drm/i915: Check live status before reading edid")
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
(cherry picked from commit f8d03ea005)
[Jani: undo the file mode change of the original commit]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Now that omapdss is only for omapdrm, we can change omapdrm to select
OMAP2_DSS to enable omapdss if omapdrm is enabled, instead of omapdrm
depending on omapdss.
We can also change omapdss and the display drivers to depend on
DRM_OMAP, so that they are only visible under omapdrm in menuconfig.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Acked-by: Rob Clark <robdclark@gmail.com>
Now that omapfb has its own copy of omapdss and display drivers, we can
move omapdss and display drivers which omapdrm uses to omapdrm's
directory.
We also need to change the main drm Makefile so that omapdrm directory
is always entered, because omapdss has a file that can't be built as a
module.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Acked-by: Rob Clark <robdclark@gmail.com>
RK3036 registers layout is quite difference with rk3288 layout,
The IC design with different framework, rk3036 vop is VOP LITE,
and rk3288 is VOP FULL.
RK3036 support two overlay plane and one hwc plane, max output
resolution is 1080p. it support IOMMU, and its IOMMU same as
rk3288's.
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
There are two version scale control register found on vop,
scale full version found on rk3288, support extension registers.
and scale little version found on rk3036, only support common scale.
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Fill atomic needed funcs with default atomic helper library.
Rockchip use dw_hdmi, and drm/rockchip will covert to atomic api,
we need dw_hdmi support atomic funcs.
Now another drm driver use dw_hdmi is imx, not yet atomic, so
check DRIVER_ATOMIC at runtime to spilt atomic and not atomic.
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Both connecter gate and out_mode are not conflict with mode set
configure. Direct setting connecter gate and out_mode, that allow
connector do rockchip_drm_crtc_mode_config after mode set.
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
If drm core requests a async commit, rockchip_drm_atomic_commit
will schedule a work task to update later.
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Rk3288 vop timing registers is immediately register, when configure
timing on display active time, will cause tearing. use dclk reset is
not a good idea to avoid this tearing. we can avoid tearing by using
standby register.
Vop standby register will take effect at end of current frame, and
go back to work immediately when exit standby.
So we can use standby register to protect this context.
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Rockchip vop not support hw vblank counter, needed check the committed
register if it's really take effect.
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
For vop, power by enable/disable is more suitable then legacy dpms
function, and enable/disable more closely to the new atomic API.
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
No functional update, drm_vblank_* is the legacy version of
drm_crtc_vblank_*. and use new api make driver more clean.
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
This merges '5b726e06d6e8309e5c9ef4109a32caf27c71dfc8' into drm-next
Just to resolve some merges to make Daniel's life easier.
Signed-off-by: DAve Airlie <airlied@redhat.com>
Pull i915 drm fixes from Jani Nikula:
"Here's a batch of i915 fixes all around. It may be slightly bigger
than one would hope for at this stage, but they've all been through
testing in our -next before being picked up for v4.4. Also, I missed
Dave's fixes pull earlier today just because I wanted an extra testing
round on this. So I'm fairly confident.
Wishing you all the things it is customary to wish this time of the
year"
* tag 'drm-intel-fixes-2015-12-23' of git://anongit.freedesktop.org/drm-intel:
drm/i915: Correct max delay for HDMI hotplug live status checking
drm/i915: mdelay(10) considered harmful
drm/i915: Kill intel_crtc->cursor_bo
drm/i915: Workaround CHV pipe C cursor fail
drm/i915: Only spin whilst waiting on the current request
drm/i915: Limit the busy wait on requests to 5us not 10ms!
drm/i915: Break busywaiting for requests on pending signals
drm/i915: Disable primary plane if we fail to reconstruct BIOS fb (v2)
drm/i915: Set the map-and-fenceable flag for preallocated objects
drm/i915: Drop the broken cursor base==0 special casing
Atomic changes broke check_digital_port_conflicts(). It needs to look
at the global situation instead of just trying to find a conflict
within the current atomic state.
This bug made my HSW explode spectacularly after I had split the DDI
encoders into separate DP and HDMI encoders. With the fix, things
seem much more solid.
I hope holding the connection_mutex is enough protection that we can
actually walk the connectors even if they're not part of the current
atomic state...
v2: Regenerate the patch so that it actually applies (Jani)
Cc: stable@vger.kernel.org
Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Fixes: 5448a00d3f ("drm/i915: Don't use staged config in check_digital_port_conflicts()")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1449764551-12466-1-git-send-email-ville.syrjala@linux.intel.com
(cherry picked from commit 0bff485865)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
- fix atomic watermark recomputation logic (Maarten)
- modeset sequence fixes for LPT (Ville)
- more kbl enabling&prep work (Rodrigo, Wayne)
- first bits for mst audio
- page dirty tracking fixes from Dave Gordon
- new get_eld hook from Takashi, also included in the sound tree
- fixup cursor handling when placed at address 0 (Ville)
- refactor VBT parsing code (Jani)
- rpm wakelock debug infrastructure ( Imre)
- fbdev is pinned again (Chris)
- tune the busywait logic to avoid wasting cpu cycles (Chris)
* tag 'drm-intel-next-2015-12-18' of git://anongit.freedesktop.org/drm-intel: (81 commits)
drm/i915: Update DRIVER_DATE to 20151218
drm/i915/skl: Default to noncoherent access up to F0
drm/i915: Only spin whilst waiting on the current request
drm/i915: Limit the busy wait on requests to 5us not 10ms!
drm/i915: Break busywaiting for requests on pending signals
drm/i915: don't enable autosuspend on platforms without RPM support
drm/i915/backlight: prefer dev_priv over dev pointer
drm/i915: Disable primary plane if we fail to reconstruct BIOS fb (v2)
drm/i915: Pin the ifbdev for the info->system_base GGTT mmapping
drm/i915: Set the map-and-fenceable flag for preallocated objects
drm/i915: mdelay(10) considered harmful
drm/i915: check that we are in an RPM atomic section in GGTT PTE updaters
drm/i915: add support for checking RPM atomic sections
drm/i915: check that we hold an RPM wakelock ref before we put it
drm/i915: add support for checking if we hold an RPM reference
drm/i915: use assert_rpm_wakelock_held instead of opencoding it
drm/i915: add assert_rpm_wakelock_held helper
drm/i915: remove HAS_RUNTIME_PM check from RPM get/put/assert helpers
drm/i915: get a permanent RPM reference on platforms w/o RPM support
drm/i915: refactor RPM disabling due to RC6 being disabled
...
[airlied: fixup build problems on arm - added errno.h include]
* 'drm-next-4.5' of git://people.freedesktop.org/~agd5f/linux: (152 commits)
amd/powerplay: fix copy paste typo in hardwaremanager.c
amd/powerplay: disable powerplay by default initially
amd/powerplay: don't enable ucode fan control if vbios has no fan table
drm/amd/powerplay: show gpu load when print gpu performance for Cz. (v2)
drm/amd/powerplay: check whether need to enable thermal control. (v2)
drm/amd/powerplay: add point check to avoid NULL point hang.
drm/amdgpu/powerplay: Program a calculated value as Deep Sleep clock.
drm/amd/powerplay: Don't return an error if fan table is missing
drm/powerplay/hwmgr: log errors in tonga_hwmgr_backend_init
drm/powerplay: add debugging output to processpptables.c
drm/powerplay: add debugging output to tonga_processpptables.c
amd/powerplay: Add structures required to report configuration change
amd/powerplay: Fix get dal power level
amd\powerplay Implement get dal power level
drm/amd/powerplay: display gpu load when print performance for tonga.
drm/amdgpu/powerplay: enable sysfs and debugfs interfaces late
drm/amd/powerplay: move shared function of vi to hwmgr. (v2)
drm/amd/powerplay: check whether enable dpm in powerplay.
drm/amd/powerplay: fix bug that dpm funcs in debugfs/sysfs missing.
drm/amd/powerplay: fix boolreturn.cocci warnings
...
These changes from Liviu add support for atomic mode setting, add the
TMDS clock limitation according to the device, and ensure that we
correctly clean up in the unbind function.
* 'drm-tda998x-devel' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
drm/i2c: tda998x: Add support for atomic modesetting
drm/i2c: tda998x: increase the supported dotclock frequency to 165MHz for TDA19988
drm/i2c: tda998x: unregister the connector in the unbind function
These are the patches from Daniel Vetter, getting rid of struct_mutex
from the Armada DRM driver.
* 'drm-armada-devel' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
drm/armada: use a private mutex to protect priv->linear
drm/armada: drop struct_mutex from cursor paths
drm/armada: don't grab dev->struct_mutex for in mmap offset ioctl
drm/armada: plug leak in dumb_map_offset
drm/armada: use unlocked gem unreferencing
There was a silent conflict between
commit 0a87871626
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Thu Oct 15 14:23:01 2015 +0200
drm/i915: restore ggtt double-bind avoidance
and
commit 5bab6f60cb
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Fri Oct 23 18:43:32 2015 +0100
drm/i915: Serialise updates to GGTT with access through GGTT on Braswell
thankfully caught by the extra WARN safegaurd in 0a878716. Since we now
override the GGTT insert_pages callback when installing the aliasing
ppgtt, we assert that the callback is the original ggtt routine.
However, on Braswell we now use a different insertion routine to
serialise access through the GGTT with updating the PTE and hence the
conflict. To avoid the conflict, move the custom insertion routine for
Braswell down a level.
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1447859979-20107-1-git-send-email-chris@chris-wilson.co.uk
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: drm-intel-fixes@lists.freedesktop.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
(cherry picked from commit c140330b5e)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The total delay of HDMI hotplug detecting with 30ms have already
been split into a resolution of 3 retries of 10ms each, for the worst
cases. But it still suffered from only waiting 10ms at most in
intel_hdmi_detect(). This patch corrects it by reading hotplug status
with 4 times at most for 30ms delay.
v2:
- straight up to loop execution for more clear in code readability
- mdelay will replace with msleep by Daniel's new patch
drm/i915: mdelay(10) considered harmful
- suggest to re-evaluate try times for being compatible to old HDMI monitor
Reviewed-by: Cooper Chiou <cooper.chiou@intel.com>
Tested-by: Gary Wang <gary.c.wang@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Gavin Hindman <gavin.hindman@intel.com>
Cc: Sonika Jindal <sonika.jindal@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Gary Wang <gary.c.wang@intel.com>
[danvet: fixup conflict with s/mdelay/msleep/ patch.]
Cc: drm-intel-fixes@lists.freedesktop.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
(cherry picked from commit 61fb3980dd)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
I missed this myself when reviewing
commit 237ed86c69
Author: Sonika Jindal <sonika.jindal@intel.com>
Date: Tue Sep 15 09:44:20 2015 +0530
drm/i915: Check live status before reading edid
Long sleeps like this really shouldn't waste cpu cycles spinning.
Cc: Sonika Jindal <sonika.jindal@intel.com>
Cc: "Wang, Gary C" <gary.c.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1449859455-32609-1-git-send-email-daniel.vetter@ffwll.ch
Reviewed-by: Sonika Jindal <sonika.jindal@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
(cherry picked from commit 71a199bacb)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The vma may have been rebound between the last time the cursor was
enabled and now, so skipping the cursor gtt offset deduction is not
safe unless we would also reset cursor_bo to NULL when disabling the
cursor. Just thow cursor_bo to the bin instead since it's lost all
other uses thanks to universal plane support.
Chris pointed out that cursor updates are currently too slow
via universal planes that micro optimizations like these wouldn't
even help.
v2: Add a note about futility of micro optimizations (Chris)
Cc: drm-intel-fixes@lists.freedesktop.org
References: http://lists.freedesktop.org/archives/intel-gfx/2015-December/082976.html
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1450107302-17171-1-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit 1264859d64)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Turns out CHV pipe C was glued on somewhat poorly, and there's something
wrong with the cursor. If the cursor straddles the left screen edge,
and is then moved away from the edge or disabled, the pipe will often
underrun. If enough underruns are triggered quickly enough the pipe
will fall over and die (it just scans out a solid color and reports
a constant underrun). We need to turn the disp2d power well off and
on again to recover the pipe.
None of that is very nice for the user, so let's just refuse to place
the cursor in the compromised position. The ddx appears to fall back
to swcursor when the ioctl returns an error, so theoretically there's
no loss of functionality for the user (discounting swcursor bugs).
I suppose most cursors images actually have the hotspot not exactly
at 0,0 so under typical conditions the fallback will in fact kick in
as soon as the cursor touches the left edge of the screen.
Any atomic compositor should anyway be prepared to fall back to
GPU composition when things don't work out, so there should be no
problem with those.
Other things that I tried to solve this include flipping all
display related clock gating knobs I could find, increasing the
minimum gtt alignment all the way up to 512k. I also tried to see
if there are more specific screen coordinates that hit the bug, but
the findings were somewhat inconclusive. Sometimes the failures
happen almost across the whole left edge, sometimes more at the very
top and around the bottom half. I wasn't able to find any real pattern
to these variations, so it seems our only choice is to just refuse
to straddle the left screen edge at all.
Cc: stable@vger.kernel.org
Cc: Jason Plum <max@warheads.net>
Testcase: igt/kms_chv_cursor_fail
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92826
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1450459479-16286-1-git-send-email-ville.syrjala@linux.intel.com
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
(cherry picked from commit b29ec92c4f)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Limit busywaiting only to the request currently being processed by the
GPU. If the request is not currently being processed by the GPU, there
is a very low likelihood of it being completed within the 2 microsecond
spin timeout and so we will just be wasting CPU cycles.
v2: Check for logical inversion when rebasing - we were incorrectly
checking for this request being active, and instead busywaiting for
when the GPU was not yet processing the request of interest.
v3: Try another colour for the seqno names.
v4: Another colour for the function names.
v5: Remove the forced coherency when checking for the active request. On
reflection and plenty of recent experimentation, the issue is not a
cache coherency problem - but an irq/seqno ordering problem (timing issue).
Here, we do not need the w/a to force ordering of the read with an
interrupt.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: "Rogozhkin, Dmitry V" <dmitry.v.rogozhkin@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Eero Tamminen <eero.t.tamminen@intel.com>
Cc: "Rantala, Valtteri" <valtteri.rantala@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1449833608-22125-4-git-send-email-chris@chris-wilson.co.uk
(cherry picked from commit 821485dc2a)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
When waiting for high frequency requests, the finite amount of time
required to set up the irq and wait upon it limits the response rate. By
busywaiting on the request completion for a short while we can service
the high frequency waits as quick as possible. However, if it is a slow
request, we want to sleep as quickly as possible. The tradeoff between
waiting and sleeping is roughly the time it takes to sleep on a request,
on the order of a microsecond. Based on measurements of synchronous
workloads from across big core and little atom, I have set the limit for
busywaiting as 10 microseconds. In most of the synchronous cases, we can
reduce the limit down to as little as 2 miscroseconds, but that leaves
quite a few test cases regressing by factors of 3 and more.
The code currently uses the jiffie clock, but that is far too coarse (on
the order of 10 milliseconds) and results in poor interactivity as the
CPU ends up being hogged by slow requests. To get microsecond resolution
we need to use a high resolution timer. The cheapest of which is polling
local_clock(), but that is only valid on the same CPU. If we switch CPUs
because the task was preempted, we can also use that as an indicator that
the system is too busy to waste cycles on spinning and we should sleep
instead.
__i915_spin_request was introduced in
commit 2def4ad99b [v4.2]
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Tue Apr 7 16:20:41 2015 +0100
drm/i915: Optimistically spin for the request completion
v2: Drop full u64 for unsigned long - the timer is 32bit wraparound safe,
so we can use native register sizes on smaller architectures. Mention
the approximate microseconds units for elapsed time and add some extra
comments describing the reason for busywaiting.
v3: Raise the limit to 10us
v4: Now 5us.
Reported-by: Jens Axboe <axboe@kernel.dk>
Link: https://lkml.org/lkml/2015/11/12/621
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: "Rogozhkin, Dmitry V" <dmitry.v.rogozhkin@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Eero Tamminen <eero.t.tamminen@intel.com>
Cc: "Rantala, Valtteri" <valtteri.rantala@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1449833608-22125-3-git-send-email-chris@chris-wilson.co.uk
(cherry picked from commit ca5b721e23)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The busywait in __i915_spin_request() does not respect pending signals
and so may consume the entire timeslice for the task instead of
returning to userspace to handle the signal.
In the worst case this could cause a delay in signal processing of 20ms,
which would be a noticeable jitter in cursor tracking. If a higher
resolution signal was being used, for example to provide fairness of a
server timeslices between clients, we could expect to detect some
unfairness between clients (i.e. some windows not updating as fast as
others). This issue was noticed when inspecting a report of poor
interactivity resulting from excessively high __i915_spin_request usage.
Fixes regression from
commit 2def4ad99b [v4.2]
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Tue Apr 7 16:20:41 2015 +0100
drm/i915: Optimistically spin for the request completion
v2: Try to assess the impact of the bug
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc; "Rogozhkin, Dmitry V" <dmitry.v.rogozhkin@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Eero Tamminen <eero.t.tamminen@intel.com>
Cc: "Rantala, Valtteri" <valtteri.rantala@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1449833608-22125-2-git-send-email-chris@chris-wilson.co.uk
(cherry picked from commit 91b0c352ac)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
If we fail to reconstruct the BIOS fb (e.g., because the FB is too
large), we'll be left with plane state that indicates the primary plane
is visible yet has a NULL fb. This mismatch causes problems later on
(e.g., for the watermark code). Since we've failed to reconstruct the
BIOS FB, the best solution is to just disable the primary plane and
pretend the BIOS never had it enabled.
v2: Add intel_pre_disable_primary() call (Maarten)
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: drm-intel-fixes@lists.freedesktop.org
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1449171462-30763-2-git-send-email-matthew.d.roper@intel.com
(cherry picked from commit 200757f5d7)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
As we mark the preallocated objects as bound, we should also flag them
correctly as being map-and-fenceable (if appropriate!) so that later
users do not get confused and try and rebind the pinned vma in order to
get a map-and-fenceable binding.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: "Goel, Akash" <akash.goel@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: drm-intel-fixes@lists.freedesktop.org
Link: http://patchwork.freedesktop.org/patch/msgid/1448029000-10616-1-git-send-email-chris@chris-wilson.co.uk
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
(cherry picked from commit d0710abbcd)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The cursor code tries to treat base==0 to mean disabled. That fails
when the cursor bo gets bound at ggtt offset 0, and the user is left
looking at an invisible cursor.
We lose the disabled->disabled optimization, but that seems like
something better handled at a slightly higher level.
Cc: drm-intel-fixes@lists.freedesktop.org
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1450091808-32607-3-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit 663f3122d0)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
I've decided to just send this fixes-for-next pull request now, even if
we don't have a patch for the CONFIG_PM_SLEEP build failure reviewed.
If you like my patch for that, I'd be happy to see it applied directly.
This pull request brings in little fixes from Dan Carpenter for the 3D
support added in this -next cycle.
* tag 'drm-vc4-next-2015-12-21' of http://github.com/anholt/linux:
drm/vc4: fix an error code
drm/vc4: allocate enough memory in vc4_save_hang_state()
drm/vc4: copy_to_user() returns the number of bytes remaining
Some systems have a single fan controlled by ACPI or some other
method.
Reviewed-by: Tom St Denis <tom.stdenis@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Show GPU load in in the debugfs output.
v2: integrate Tom's optimization
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
In I+A platform(skylake), it is controlled by intel.
v2: integrate Tom's fix
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
To avoid users accessing them before the module has finished
initializing them and make sure they are only created if
dpm has properly initialized.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
in dpm module, sysfs init func move to late_init from sw_init.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Change-Id: Ice4a73212d8e3106d05f04a27043820ffd32929e
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
drivers/gpu/drm/amd/amdgpu/../powerplay/hwmgr/ppatomctrl.c:475:10-11: WARNING: return of 0/1 in function 'atomctrl_lookup_gpio_pin' with return type bool
Return statements in functions returning bool should use
true/false instead of 1/0.
Generated by: scripts/coccinelle/misc/boolreturn.cocci
CC: yanyang1 <young.yang@amd.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
v2: fix grbm locking
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
v2: fix bug in register mask setting.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Acked-by: Jammy Zhou <Jammy.Zhou@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
This conflicts with fiji_smumgr.h from powerplay
in DKMS environment
Signed-off-by: Jammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jordan Lazare <Jordan.Lazare@amd.com>
This conflicts with the tonga_smumgr.h from powerplay
in DKMS environement
Signed-off-by: Jammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jordan Lazare <Jordan.Lazare@amd.com>
- The macro is silent by default.
- Use the macro to print Display Configuration - related changes.
Signed-off-by: David Rokhvarg <David.Rokhvarg@amd.com>
Removed fiji_mgcg_cgcg_init that is affected and redundant for new implementation.
v2: re-add mgcg_cgcg init
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
drivers/gpu/drm/amd/amdgpu/../powerplay/hwmgr/tonga_hwmgr.c:2653:9-10: WARNING: return of 0/1 in function 'is_pcie_gen2_supported' with return type bool
drivers/gpu/drm/amd/amdgpu/../powerplay/hwmgr/tonga_hwmgr.c:2645:9-10: WARNING: return of 0/1 in function 'is_pcie_gen3_supported' with return type bool
Return statements in functions returning bool should use
true/false instead of 1/0.
Generated by: scripts/coccinelle/misc/boolreturn.cocci
CC: yanyang1 <young.yang@amd.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rather than hardcode it.
v2: integrate spc fix from Rex
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rather than hardcode it.
v2: integrate spc fix from Rex
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a helper to get the max link width of the port.
Similar to the helper to get the max link speed.
v2: fix typo in commit message
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These will be used by multiple powerplay drivers and
other IP modules.
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Better handle power state changes.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
