This is a rewrite of this[1] Wiki page with further enhancements. The
doc also includes a section on debugging problems in nested
environments, among other improvements.
[1] https://www.linux-kvm.org/page/Nested_Guests
Signed-off-by: Kashyap Chamarthy <kchamart@redhat.com>
Message-Id: <20200505112839.30534-1-kchamart@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* GICv4.1 support
* 32bit host removal
PPC:
* secure (encrypted) using under the Protected Execution Framework
ultravisor
s390:
* allow disabling GISA (hardware interrupt injection) and protected
VMs/ultravisor support.
x86:
* New dirty bitmap flag that sets all bits in the bitmap when dirty
page logging is enabled; this is faster because it doesn't require bulk
modification of the page tables.
* Initial work on making nested SVM event injection more similar to VMX,
and less buggy.
* Various cleanups to MMU code (though the big ones and related
optimizations were delayed to 5.8). Instead of using cr3 in function
names which occasionally means eptp, KVM too has standardized on "pgd".
* A large refactoring of CPUID features, which now use an array that
parallels the core x86_features.
* Some removal of pointer chasing from kvm_x86_ops, which will also be
switched to static calls as soon as they are available.
* New Tigerlake CPUID features.
* More bugfixes, optimizations and cleanups.
Generic:
* selftests: cleanups, new MMU notifier stress test, steal-time test
* CSV output for kvm_stat.
KVM/MIPS has been broken since 5.5, it does not compile due to a patch committed
by MIPS maintainers. I had already prepared a fix, but the MIPS maintainers
prefer to fix it in generic code rather than KVM so they are taking care of it.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl6GOnIUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMfxwf/ZKLZiRoaovXCOG71M/eHtQb8ZIqU
3MPy+On3eC5Sk/aBxWUL9EFZsbYG6kYdbZ1VOvG9XPBoLlnkDSm/IR0kaELHtnjj
oGVda/tvGn46Ne39y8xBptmb91WDcWH0vFthT/CwlMxAw3xjr+gG7Qyo+8F2CW6m
SSSuLiHSBnyO1cQKruBTHZ8qnR8LlnfXEqtd6Y4LFLic0LbLIoIdRcT3wjQrcZrm
Djd7wbTEYZjUfoqZ72ekwEDUsONcDLDSKcguDO9pSMSCGhpxCVT5Vy68KRpoIMs2
nzNWDKjvqQo5zb2+GWxJgkd12Hv+n7PCXZMbVrWBu1pQsewUns9m4mkpGw==
=6fGt
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM:
- GICv4.1 support
- 32bit host removal
PPC:
- secure (encrypted) using under the Protected Execution Framework
ultravisor
s390:
- allow disabling GISA (hardware interrupt injection) and protected
VMs/ultravisor support.
x86:
- New dirty bitmap flag that sets all bits in the bitmap when dirty
page logging is enabled; this is faster because it doesn't require
bulk modification of the page tables.
- Initial work on making nested SVM event injection more similar to
VMX, and less buggy.
- Various cleanups to MMU code (though the big ones and related
optimizations were delayed to 5.8). Instead of using cr3 in
function names which occasionally means eptp, KVM too has
standardized on "pgd".
- A large refactoring of CPUID features, which now use an array that
parallels the core x86_features.
- Some removal of pointer chasing from kvm_x86_ops, which will also
be switched to static calls as soon as they are available.
- New Tigerlake CPUID features.
- More bugfixes, optimizations and cleanups.
Generic:
- selftests: cleanups, new MMU notifier stress test, steal-time test
- CSV output for kvm_stat"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (277 commits)
x86/kvm: fix a missing-prototypes "vmread_error"
KVM: x86: Fix BUILD_BUG() in __cpuid_entry_get_reg() w/ CONFIG_UBSAN=y
KVM: VMX: Add a trampoline to fix VMREAD error handling
KVM: SVM: Annotate svm_x86_ops as __initdata
KVM: VMX: Annotate vmx_x86_ops as __initdata
KVM: x86: Drop __exit from kvm_x86_ops' hardware_unsetup()
KVM: x86: Copy kvm_x86_ops by value to eliminate layer of indirection
KVM: x86: Set kvm_x86_ops only after ->hardware_setup() completes
KVM: VMX: Configure runtime hooks using vmx_x86_ops
KVM: VMX: Move hardware_setup() definition below vmx_x86_ops
KVM: x86: Move init-only kvm_x86_ops to separate struct
KVM: Pass kvm_init()'s opaque param to additional arch funcs
s390/gmap: return proper error code on ksm unsharing
KVM: selftests: Fix cosmetic copy-paste error in vm_mem_region_move()
KVM: Fix out of range accesses to memslots
KVM: X86: Micro-optimize IPI fastpath delay
KVM: X86: Delay read msr data iff writes ICR MSR
KVM: PPC: Book3S HV: Add a capability for enabling secure guests
KVM: arm64: GICv4.1: Expose HW-based SGIs in debugfs
KVM: arm64: GICv4.1: Allow non-trapping WFI when using HW SGIs
...
* Add a capability for enabling secure guests under the Protected
Execution Framework ultravisor
* Various bug fixes and cleanups.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJegnq3AAoJEJ2a6ncsY3GfrU8IANpaxS7kTAsW3ZN0wJnP2PHq
i8j7ZPlCVLpkQWArrMyMimDLdiN9VP7lvaWonAWjG0HJrxlmMUUVnwVSMuPTXhWY
vSwEqhUXwSF5KKxN7DYkgxqaKFxkElJIubVE/AYJjH9zFpu9ca4vM5sCxnzWcvS3
hxPNe756nKhFH9xhrC/9NRUZWmDAiv75wvzq+5DRKbSVPJGJugchdIPBbi3Yrr7P
qxnUCPZdCxzXXU94bfQl038wrjSMR3S7b4FvekJ12go2FalujqzsL2lVtift4Rf0
jvu+RIINcmTiaQqclY332j7l24LZ6Pni456RygT5OwFxuYoxWKZRafN16JmaMCo=
=rpJL
-----END PGP SIGNATURE-----
Merge tag 'kvm-ppc-next-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into HEAD
KVM PPC update for 5.7
* Add a capability for enabling secure guests under the Protected
Execution Framework ultravisor
* Various bug fixes and cleanups.
- return the proper error to userspace when a signal interrupts the
KSM unsharing operation
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=Wf8x
-----END PGP SIGNATURE-----
Merge tag 'kvm-s390-next-5.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
KVM: s390: Fix for error codes
- return the proper error to userspace when a signal interrupts the
KSM unsharing operation
If a signal is pending we might return -ENOMEM instead of -EINTR.
We should propagate the proper error during KSM unsharing.
unmerge_ksm_pages returns -ERESTARTSYS on signal_pending. This gets
translated by entry.S to -EINTR. It is important to get this error
code so that userspace can retry.
To make this clearer we also add -EINTR to the documentation of the
PV_ENABLE call, which calls unmerge_ksm_pages.
Fixes: 3ac8e38015 ("s390/mm: disable KSM for storage key enabled pages")
Reviewed-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Tested-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
At present, on Power systems with Protected Execution Facility
hardware and an ultravisor, a KVM guest can transition to being a
secure guest at will. Userspace (QEMU) has no way of knowing
whether a host system is capable of running secure guests. This
will present a problem in future when the ultravisor is capable of
migrating secure guests from one host to another, because
virtualization management software will have no way to ensure that
secure guests only run in domains where all of the hosts can
support secure guests.
This adds a VM capability which has two functions: (a) userspace
can query it to find out whether the host can support secure guests,
and (b) userspace can enable it for a guest, which allows that
guest to become a secure guest. If userspace does not enable it,
KVM will return an error when the ultravisor does the hypercall
that indicates that the guest is starting to transition to a
secure guest. The ultravisor will then abort the transition and
the guest will terminate.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Ram Pai <linuxram@us.ibm.com>
That's it. Remove all references to KVM itself, and document
that although it is no more, the ABI between SVC and HYP still
exists.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Olof Johansson <olof@lixom.net>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Vladimir Murzin <vladimir.murzin@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Userspace has no way to query if SEV has been disabled with the
sev module parameter of kvm-amd.ko. Actually it has one, but it
is a hack: do ioctl(KVM_MEM_ENCRYPT_OP, NULL) and check if it
returns EFAULT. Make it a little nicer by returning zero for
SEV enabled and NULL argument, and while at it document the
ioctl arguments.
Cc: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
1. Allow to disable gisa
2. protected virtual machines
Protected VMs (PVM) are KVM VMs, where KVM can't access the VM's
state like guest memory and guest registers anymore. Instead the
PVMs are mostly managed by a new entity called Ultravisor (UV),
which provides an API, so KVM and the PV can request management
actions.
PVMs are encrypted at rest and protected from hypervisor access
while running. They switch from a normal operation into protected
mode, so we can still use the standard boot process to load a
encrypted blob and then move it into protected mode.
Rebooting is only possible by passing through the unprotected/normal
mode and switching to protected again.
One mm related patch will go via Andrews mm tree ( mm/gup/writeback:
add callbacks for inaccessible pages)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=x6Hn
-----END PGP SIGNATURE-----
Merge tag 'kvm-s390-next-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
KVM: s390: Features and Enhancements for 5.7 part1
1. Allow to disable gisa
2. protected virtual machines
Protected VMs (PVM) are KVM VMs, where KVM can't access the VM's
state like guest memory and guest registers anymore. Instead the
PVMs are mostly managed by a new entity called Ultravisor (UV),
which provides an API, so KVM and the PV can request management
actions.
PVMs are encrypted at rest and protected from hypervisor access
while running. They switch from a normal operation into protected
mode, so we can still use the standard boot process to load a
encrypted blob and then move it into protected mode.
Rebooting is only possible by passing through the unprotected/normal
mode and switching to protected again.
One mm related patch will go via Andrews mm tree ( mm/gup/writeback:
add callbacks for inaccessible pages)
Clarify locking.rst to mention early that we're not enabling fast page
fault for indirect sps. The previous wording is confusing, in that it
seems the proposed solution has been already implemented but it has not.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove the code for handling stateful CPUID 0x2 and mark the associated
flags as deprecated. WARN if host CPUID 0x2.0.AL > 1, i.e. if by some
miracle a host with stateful CPUID 0x2 is encountered.
No known CPU exists that supports hardware accelerated virtualization
_and_ a stateful CPUID 0x2. Barring an extremely contrived nested
virtualization scenario, stateful CPUID support is dead code.
Suggested-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It could take kvm->mmu_lock for an extended period of time when
enabling dirty log for the first time. The main cost is to clear
all the D-bits of last level SPTEs. This situation can benefit from
manual dirty log protect as well, which can reduce the mmu_lock
time taken. The sequence is like this:
1. Initialize all the bits of the dirty bitmap to 1 when enabling
dirty log for the first time
2. Only write protect the huge pages
3. KVM_GET_DIRTY_LOG returns the dirty bitmap info
4. KVM_CLEAR_DIRTY_LOG will clear D-bit for each of the leaf level
SPTEs gradually in small chunks
Under the Intel(R) Xeon(R) Gold 6152 CPU @ 2.10GHz environment,
I did some tests with a 128G windows VM and counted the time taken
of memory_global_dirty_log_start, here is the numbers:
VM Size Before After optimization
128G 460ms 10ms
Signed-off-by: Jay Zhou <jianjay.zhou@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add documentation about protected KVM guests and description of changes
that are necessary to move a KVM VM into Protected Virtualization mode.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
[borntraeger@de.ibm.com: fixing and conversion to rst]
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
A lot of the registers are controlled by the Ultravisor and never
visible to KVM. Some fields in the sie control block are overlayed, like
gbea. As no known userspace uses the ONE_REG interface on s390 if sync
regs are available, no functionality is lost if it is disabled for
protected guests.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
[borntraeger@de.ibm.com: patch merging, splitting, fixing]
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The adapter interrupt page containing the indicator bits is currently
pinned. That means that a guest with many devices can pin a lot of
memory pages in the host. This also complicates the reference tracking
which is needed for memory management handling of protected virtual
machines. It might also have some strange side effects for madvise
MADV_DONTNEED and other things.
We can simply try to get the userspace page set the bits and free the
page. By storing the userspace address in the irq routing entry instead
of the guest address we can actually avoid many lookups and list walks
so that this variant is very likely not slower.
If userspace messes around with the memory slots the worst thing that
can happen is that we write to some other memory within that process.
As we get the the page with FOLL_WRITE this can also not be used to
write to shared read-only pages.
Signed-off-by: Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
[borntraeger@de.ibm.com: patch simplification]
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
We also need to rstify the new ioctls that we added in parallel to the
rstification of the kvm docs.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Due to some merge conflict, this file ended being alone under
Documentation/virtual.
The file itself is almost at ReST format. Just minor
adjustments are needed:
- Adjust title markup;
- Adjust a list identation;
- add a literal block markup;
- Add some blank lines.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This file is already in ReST compatible format.
So, rename it and add to the kvm's index.rst.
While here, use the standard conversion for document titles.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Use document title and chapter markups;
- Add markups for literal blocks;
- Add markups for tables;
- use :field: for field descriptions;
- Add blank lines and adjust indentation.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This file is almost in ReST format. Just one change was
needed:
- Add markups for a literal block and change its indentation.
While here, use the standard markup for the document title.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Use document title and chapter markups;
- Add markups for tables;
- Use list markups;
- Add markups for literal blocks;
- Add blank lines.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This file is almost in ReST format. Just a small set of
changes were needed:
- Add markups for lists;
- Add markups for a literal block;
- Adjust whitespaces.
While here, use the standard markup for the document title.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Use document title and chapter markups;
- Add markups for tables;
- Add markups for literal blocks;
- Add blank lines and adjust indentation.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Use document title and chapter markups;
- Add markups for literal blocks;
- use :field: for field descriptions;
- Add blank lines and adjust indentation.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Use document title and chapter markups;
- Convert tables;
- Add markups for literal blocks;
- use :field: for field descriptions;
- Add blank lines and adjust indentation
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Add a title for the document;
- Adjust whitespaces for it to be properly formatted after
parsed.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Add proper markups for titles;
- Adjust whitespaces and blank lines to match ReST
needs;
- Mark literal blocks as such.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
convert api.txt document to ReST format while trying to keep
its format as close as possible with the authors intent, and
avoid adding uneeded markups.
- Use document title and chapter markups;
- Convert tables;
- Add markups for literal blocks;
- use :field: for field descriptions;
- Add blank lines and adjust indentation
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Use title markups;
- adjust indentation and add blank lines as needed;
- adjust tables to match ReST accepted formats;
- mark code blocks as such.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Use title markups;
- adjust indentation and add blank lines as needed;
- adjust tables to match ReST accepted formats;
- use :field: markups.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Use title markups;
- adjust indentation and add blank lines as needed;
- use :field: markups;
- Use cross-references;
- mark code blocks as such.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Use standard title markup;
- adjust lists;
- mark code blocks as such.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Use title markups;
- adjust indentation and add blank lines as needed;
- adjust tables to match ReST accepted formats;
- use :field: markups;
- mark code blocks as such.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Use standard markup for document title;
- Adjust indentation and add blank lines as needed;
- use the notes markup;
- mark code blocks as such.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This document is almost in ReST format. The only thing
needed is to mark a list as such and to add an extra
whitespace.
Yet, let's also use the standard document title markup,
as it makes easier if anyone wants later to add sessions
to it.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Use title markups;
- change indent to match ReST syntax;
- use proper table markups;
- use literal block markups.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Use title markups;
- change indent to match ReST syntax;
- use proper table markups;
- use literal block markups.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Fix document title to match ReST format
- Convert the table to be properly recognized
- use proper markups for literal blocks
- Some indentation fixes to match ReST
While here, add an index for kvm devices.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Fix document title to match ReST format
- Convert the table to be properly recognized
- Some indentation fixes to match ReST syntax.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Several URLs are pointing to outdated places.
Update the references for the URLs whose contents still exists,
removing the others.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Instead of pointing for a pre-2.4 and a seaparate patch,
update it to match current upstream, as UML was merged
a long time ago.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Despite being an old document, it contains lots of information
that could still be useful.
The document has a nice style with makes easy to convert to
ReST. So, let's convert it to ReST.
This patch does:
- Use proper markups for titles;
- Mark and proper indent literal blocks;
- don't use an 'o' character for lists;
- other minor changes required for the doc to be parsed.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add this file to a new kvm/arm index.rst, in order for it to
be shown as part of the virt book.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The architecture states that we need to reset local IRQs for all CPU
resets. Because the old reset interface did not support the normal CPU
reset we never did that on a normal reset.
Let's implement an interface for the missing normal and clear resets
and reset all local IRQs, registers and control structures as stated
in the architecture.
Userspace might already reset the registers via the vcpu run struct,
but as we need the interface for the interrupt clearing part anyway,
we implement the resets fully and don't rely on userspace to reset the
rest.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20200131100205.74720-4-frankja@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Two UAPI system register IDs do not derive their values from the
ARM system register encodings. This is because their values were
accidentally swapped. As the IDs are API, they cannot be changed.
Add WARNING notes to point them out.
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Andrew Jones <drjones@redhat.com>
[maz: turned XXX into WARNING]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200120130825.28838-1-drjones@redhat.com
Framework (PEF) Ultravisor on POWER.
This enables secure memory to be represented as device memory,
which provides a way for the host to keep track of which pages of a
secure guest have been moved into secure memory managed by the
ultravisor and are no longer accessible by the host, and manage
movement of pages between secure and normal memory.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEv0VLfXa2m9eKuaRpnZrqdyxjcZ8FAl3gVG0ACgkQnZrqdyxj
cZ/X9wf/c6SlKCQFp8Vmg8zFcnqH+HkUvPUx8mFmxR9tgZbG4Q3tFSAPVorf6S6w
5wFcxOYaF/FdQIExpO7k+oCQTiD5/9kIjgH47MDxrCC2g+eKaZvMfmNWTBBEE/ER
PsFfK1qElqWZUjohzE8L8f8cITOhAStqzI2eS9lpBDwabjLFcqNanP6HOh4g3hsn
JYrBru3tUS4YBUrEg5/lZFHIkSazeHQiQ9oOvbN1vB4wtcxiOD/XZkvyr05DPESc
4LItYATT0EQBK5aGvrFGKDny4o/PIJuUypkP8a6JzHXLoXeKCgPjwxfmoOPMhHrw
OwWiKIcZYNOj7JiWBABuNPPdpUt8xw==
=+E+S
-----END PGP SIGNATURE-----
Merge tag 'kvm-ppc-uvmem-5.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into HEAD
KVM: Add support for secure guests under the Protected Execution
Framework (PEF) Ultravisor on POWER.
This enables secure memory to be represented as device memory,
which provides a way for the host to keep track of which pages of a
secure guest have been moved into secure memory managed by the
ultravisor and are no longer accessible by the host, and manage
movement of pages between secure and normal memory.
