When FIFO mode is enabled, the receive data available interrupt
(UART_IIR_RDI in code) should be triggered when the number of data
in FIFO is equal or larger than interrupt trigger level.
This patch changes the trigger level check to ensure multiple bytes
received from upper layer can trigger RDI interrupt correctly.
Cc: Joey Zheng <yu.zheng@hxt-semitech.com>
Signed-off-by: Shunyong Yang <shunyong.yang@hxt-semitech.com>
Reviewed by: Kirti Wankhede <kwankhede@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This adds the test script I am currently using to validate
the latest sockmap changes. Shortly sockmap will be ported
to selftests and these will be run from the infrastructure
there. Until then add the script here so we have a coverage
checklist when porting into selftests.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This adds an option to test the msg_pull_data helper. This
uses two options txmsg_start and txmsg_end to let the user
specify start and end bytes to pull.
The options can be used with txmsg_apply, txmsg_cork options
as well as with any of the basic tests, txmsg, txmsg_redir and
txmsg_drop (plus noisy variants) to run pull_data inline with
those tests. By giving user direct control over the variables
we can easily do negative testing as well as positive tests.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add tests for SK_DROP.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add sample application support for the bpf_msg_cork_bytes helper. This
lets the user specify how many bytes each verdict should apply to.
Similar to apply_bytes() tests these can be run as a stand-alone test
when used without other options or inline with other tests by using
the txmsg_cork option along with any of the basic tests txmsg,
txmsg_redir, txmsg_drop.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This adds an option to test the apply_bytes helper. This option lets
the user specify an int on the command line specifying how much data
each verdict should apply to.
When this is set a map entry is set with the bytes input by the user
and then the specified program --txmsg or --txmsg_redir will use the
value and set the applied data. If no other option is set then a
default --txmsg_apply program is run. This program will drop pkts
if an error is detected on the bytes map lookup. Useful to verify
the map lookup and apply helper are working and causing a hard
error if it is not.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
To verify data is not being dropped or corrupted this adds an option
to verify test-patterns on recv.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
To exercise TX ULP sendpage implementation we need a test that does
a sendfile. Add sendfile test option here.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add sockmap option to use SK_MSG program types.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The Tile architecture port was added by Chris Metcalf in 2010, and
maintained until early 2018 when he orphaned it due to his departure
from Mellanox, and nobody else stepped up to maintain it. The product
line is still around in the form of the BlueField SoC, but no longer
uses the Tile architecture.
There are also still products for sale with Tile-GX SoCs, notably the
Mikrotik CCR router family. The products all use old (linux-3.3) kernels
with lots of patches and won't be upgraded by their manufacturers. There
have been efforts to port both OpenWRT and Debian to these, but both
projects have stalled and are very unlikely to be continued in the future.
Given that we are reasonably sure that nobody is still using the port
with an upstream kernel any more, it seems better to remove it now while
the port is in a good shape than to let it bitrot for a few years first.
Cc: Chris Metcalf <chris.d.metcalf@gmail.com>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: http://www.mellanox.com/page/npu_multicore_overview
Link: https://jenkins.debian.net/view/rebootstrap/job/rebootstrap_tilegx_gcc7/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Analog Devices Blackfin port was added in 2007 and was rather
active for a while, but all work on it has come to a standstill
over time, as Analog have changed their product line-up.
Aaron Wu confirmed that the architecture port is no longer relevant,
and multiple people suggested removing blackfin independently because
of some of its oddities like a non-working SMP port, and the amount of
duplication between the chip variants, which cause extra work when
doing cross-architecture changes.
Link: https://docs.blackfin.uclinux.org/
Acked-by: Aaron Wu <Aaron.Wu@analog.com>
Acked-by: Bryan Wu <cooloney@gmail.com>
Cc: Steven Miao <realmz6@gmail.com>
Cc: Mike Frysinger <vapier@chromium.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This commit adds additional test in the trace_event example, by
attaching the bpf program to MEM_UOPS_RETIRED.LOCK_LOADS event with
PERF_SAMPLE_ADDR requested, and print the lock address value read from
the bpf program to trace_pipe.
Signed-off-by: Teng Qin <qinteng@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
All of the conflicts were cases of overlapping changes.
In net/core/devlink.c, we have to make care that the
resouce size_params have become a struct member rather
than a pointer to such an object.
Signed-off-by: David S. Miller <davem@davemloft.net>
The patch adds tests for GRE sequence number
support for metadata mode tunnel.
Signed-off-by: William Tu <u9012063@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
test_cgrp2_sock.sh and test_cgrp2_sock2.sh tests keep the program
attached to cgroup even after completion.
Using detach functionality of test_cgrp2_sock in both scripts.
Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Acked-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
Comment: Kees Cook <kees@outflux.net>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=oIgK
-----END PGP SIGNATURE-----
Merge tag 'seccomp-v4.16-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/kees/linux into fixes-v4.16-rc4
- do not build samples when cross compiling (Michal Hocko)
From Kees: "This disables the seccomp samples when cross compiling. We're seen too many build issues here, so
it's best to just disable it, especially since they're just the samples."
CPU is active when have running tasks on it and CPUFreq governor can
select different operating points (OPP) according to different workload;
we use 'pstate' to present CPU state which have running tasks with one
specific OPP. On the other hand, CPU is idle which only idle task on
it, CPUIdle governor can select one specific idle state to power off
hardware logics; we use 'cstate' to present CPU idle state.
Based on trace events 'cpu_idle' and 'cpu_frequency' we can accomplish
the duration statistics for every state. Every time when CPU enters
into or exits from idle states, the trace event 'cpu_idle' is recorded;
trace event 'cpu_frequency' records the event for CPU OPP changing, so
it's easily to know how long time the CPU stays in the specified OPP,
and the CPU must be not in any idle state.
This patch is to utilize the mentioned trace events for pstate and
cstate statistics. To achieve more accurate profiling data, the program
uses below sequence to insure CPU running/idle time aren't missed:
- Before profiling the user space program wakes up all CPUs for once, so
can avoid to missing account time for CPU staying in idle state for
long time; the program forces to set 'scaling_max_freq' to lowest
frequency and then restore 'scaling_max_freq' to highest frequency,
this can ensure the frequency to be set to lowest frequency and later
after start to run workload the frequency can be easily to be changed
to higher frequency;
- User space program reads map data and update statistics for every 5s,
so this is same with other sample bpf programs for avoiding big
overload introduced by bpf program self;
- When send signal to terminate program, the signal handler wakes up
all CPUs, set lowest frequency and restore highest frequency to
'scaling_max_freq'; this is exactly same with the first step so
avoid to missing account CPU pstate and cstate time during last
stage. Finally it reports the latest statistics.
The program has been tested on Hikey board with octa CA53 CPUs, below
is one example for statistics result, the format mainly follows up
Jesper Dangaard Brouer suggestion.
Jesper reminds to 'get printf to pretty print with thousands separators
use %' and setlocale(LC_NUMERIC, "en_US")', tried three different arm64
GCC toolchains (5.4.0 20160609, 6.2.1 20161016, 6.3.0 20170516) but all
of them cannot support printf flag character %' on arm64 platform, so go
back print number without grouping mode.
CPU states statistics:
state(ms) cstate-0 cstate-1 cstate-2 pstate-0 pstate-1 pstate-2 pstate-3 pstate-4
CPU-0 767 6111 111863 561 31 756 853 190
CPU-1 241 10606 107956 484 125 646 990 85
CPU-2 413 19721 98735 636 84 696 757 89
CPU-3 84 11711 79989 17516 909 4811 5773 341
CPU-4 152 19610 98229 444 53 649 708 1283
CPU-5 185 8781 108697 666 91 671 677 1365
CPU-6 157 21964 95825 581 67 566 684 1284
CPU-7 125 15238 102704 398 20 665 786 1197
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
samples/seccomp relies on the host setting which is not suitable for
crosscompilation and it actually fails when crosscompiling s390 and
powerpc all{yes,mod}config on x86_64 with
samples/seccomp/bpf-helper.h:135:2: error: #error __BITS_PER_LONG value unusable.
#error __BITS_PER_LONG value unusable.
^
In file included from samples/seccomp/bpf-fancy.c:13:0:
samples/seccomp/bpf-fancy.c: In function ‘main’:
samples/seccomp/bpf-fancy.c:38:11: error: ‘__NR_exit’ undeclared (first use in this function)
SYSCALL(__NR_exit, ALLOW),
and many others. I am doing these for compile testing and it's been
quite useful to catch issues. Crosscompiling sample code on the other
hand doesn't seem all that important so it seems like the easiest way to
simply disable samples/seccomp when crosscompiling.
Fixing this properly is not that easy as Kees explains:
: IIRC, one of the problems is with build ordering problems: the kernel
: headers used by the samples aren't available when cross compiling.
Signed-off-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
samples/sockops program keeps the sock_ops program attached to cgroup.
Fixed this by detaching program before exit.
Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
While building samples/sockmap, undefined reference error is thrown
for `nla_dump_errormsg'.
Linking tools/lib/bpf/nlattr.o as a fix
Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Default rlimit RLIMIT_MEMLOCK is 64KB, causes bpf map failure.
e.g.
[root@labbpf]# ./xdp_redirect $(</sys/class/net/eth2/ifindex) \
> $(</sys/class/net/eth3/ifindex)
failed to create a map: 1 Operation not permitted
The failure is seen when executing xdp_redirect while xdp_monitor
is already runnig.
Signed-off-by: Tushar Dave <tushar.n.dave@oracle.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Introduce a sample driver that register for server notifications and
spawn clients for each available test service (service 15). The spawned
clients implements the interface for encoding "ping" and "data" requests
and decode the responses from the remote.
Acked-By: Chris Lew <clew@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The commit c69de58ba8 ("net: erspan: use bitfield instead of
mask and offset") changes the erspan header to use bitfield, and
commit d350a82302 ("net: erspan: create erspan metadata uapi header")
creates a uapi header file. The above two commit breaks the current
erspan test. This patch fixes it by adapting the above two changes.
Fixes: ac80c2a165 ("samples/bpf: add erspan v2 sample code")
Fixes: ef88f89c83 ("samples/bpf: extend test_tunnel_bpf.sh with ERSPAN")
Signed-off-by: William Tu <u9012063@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov says:
====================
pull-request: bpf 2018-02-02
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) support XDP attach in libbpf, from Eric.
2) minor fixes, from Daniel, Jakub, Yonghong, Alexei.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Use bpf_set_link_xdp_fd instead of set_link_xdp_fd to remove some
code duplication and benefit of netlink ext ack errors message.
Signed-off-by: Eric Leblond <eric@regit.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Parse netlink ext attribute to get the error message returned by
the card. Code is partially take from libnl.
We add netlink.h to the uapi include of tools. And we need to
avoid include of userspace netlink header to have a successful
build of sample so nlattr.h has a define to avoid
the inclusion. Using a direct define could have been an issue
as NLMSGERR_ATTR_MAX can change in the future.
We also define SOL_NETLINK if not defined to avoid to have to
copy socket.h for a fixed value.
Signed-off-by: Eric Leblond <eric@regit.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Here is the set of "big" driver core patches for 4.16-rc1.
The majority of the work here is in the firmware subsystem, with reworks
to try to attempt to make the code easier to handle in the long run, but
no functional change. There's also some tree-wide sysfs attribute
fixups with lots of acks from the various subsystem maintainers, as well
as a handful of other normal fixes and changes.
And finally, some license cleanups for the driver core and sysfs code.
All have been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWnLvPw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynNzACgkzjPoBytJWbpWFt6SR6L33/u4kEAnRFvVCGL
s6ygQPQhZIjKk2Lxa2hC
=Zihy
-----END PGP SIGNATURE-----
Merge tag 'driver-core-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the set of "big" driver core patches for 4.16-rc1.
The majority of the work here is in the firmware subsystem, with
reworks to try to attempt to make the code easier to handle in the
long run, but no functional change. There's also some tree-wide sysfs
attribute fixups with lots of acks from the various subsystem
maintainers, as well as a handful of other normal fixes and changes.
And finally, some license cleanups for the driver core and sysfs code.
All have been in linux-next for a while with no reported issues"
* tag 'driver-core-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (48 commits)
device property: Define type of PROPERTY_ENRTY_*() macros
device property: Reuse property_entry_free_data()
device property: Move property_entry_free_data() upper
firmware: Fix up docs referring to FIRMWARE_IN_KERNEL
firmware: Drop FIRMWARE_IN_KERNEL Kconfig option
USB: serial: keyspan: Drop firmware Kconfig options
sysfs: remove DEBUG defines
sysfs: use SPDX identifiers
drivers: base: add coredump driver ops
sysfs: add attribute specification for /sysfs/devices/.../coredump
test_firmware: fix missing unlock on error in config_num_requests_store()
test_firmware: make local symbol test_fw_config static
sysfs: turn WARN() into pr_warn()
firmware: Fix a typo in fallback-mechanisms.rst
treewide: Use DEVICE_ATTR_WO
treewide: Use DEVICE_ATTR_RO
treewide: Use DEVICE_ATTR_RW
sysfs.h: Use octal permissions
component: add debugfs support
bus: simple-pm-bus: convert bool SIMPLE_PM_BUS to tristate
...
Pull networking updates from David Miller:
1) Significantly shrink the core networking routing structures. Result
of http://vger.kernel.org/~davem/seoul2017_netdev_keynote.pdf
2) Add netdevsim driver for testing various offloads, from Jakub
Kicinski.
3) Support cross-chip FDB operations in DSA, from Vivien Didelot.
4) Add a 2nd listener hash table for TCP, similar to what was done for
UDP. From Martin KaFai Lau.
5) Add eBPF based queue selection to tun, from Jason Wang.
6) Lockless qdisc support, from John Fastabend.
7) SCTP stream interleave support, from Xin Long.
8) Smoother TCP receive autotuning, from Eric Dumazet.
9) Lots of erspan tunneling enhancements, from William Tu.
10) Add true function call support to BPF, from Alexei Starovoitov.
11) Add explicit support for GRO HW offloading, from Michael Chan.
12) Support extack generation in more netlink subsystems. From Alexander
Aring, Quentin Monnet, and Jakub Kicinski.
13) Add 1000BaseX, flow control, and EEE support to mvneta driver. From
Russell King.
14) Add flow table abstraction to netfilter, from Pablo Neira Ayuso.
15) Many improvements and simplifications to the NFP driver bpf JIT,
from Jakub Kicinski.
16) Support for ipv6 non-equal cost multipath routing, from Ido
Schimmel.
17) Add resource abstration to devlink, from Arkadi Sharshevsky.
18) Packet scheduler classifier shared filter block support, from Jiri
Pirko.
19) Avoid locking in act_csum, from Davide Caratti.
20) devinet_ioctl() simplifications from Al viro.
21) More TCP bpf improvements from Lawrence Brakmo.
22) Add support for onlink ipv6 route flag, similar to ipv4, from David
Ahern.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1925 commits)
tls: Add support for encryption using async offload accelerator
ip6mr: fix stale iterator
net/sched: kconfig: Remove blank help texts
openvswitch: meter: Use 64-bit arithmetic instead of 32-bit
tcp_nv: fix potential integer overflow in tcpnv_acked
r8169: fix RTL8168EP take too long to complete driver initialization.
qmi_wwan: Add support for Quectel EP06
rtnetlink: enable IFLA_IF_NETNSID for RTM_NEWLINK
ipmr: Fix ptrdiff_t print formatting
ibmvnic: Wait for device response when changing MAC
qlcnic: fix deadlock bug
tcp: release sk_frag.page in tcp_disconnect
ipv4: Get the address of interface correctly.
net_sched: gen_estimator: fix lockdep splat
net: macb: Handle HRESP error
net/mlx5e: IPoIB, Fix copy-paste bug in flow steering refactoring
ipv6: addrconf: break critical section in addrconf_verify_rtnl()
ipv6: change route cache aging logic
i40e/i40evf: Update DESC_NEEDED value to reflect larger value
bnxt_en: cleanup DIM work on device shutdown
...
Pull livepatching updates from Jiri Kosina:
- handle 'infinitely'-long sleeping tasks, from Miroslav Benes
- remove 'immediate' feature, as it turns out it doesn't provide the
originally expected semantics, and brings more issues than value
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching:
livepatch: add locking to force and signal functions
livepatch: Remove immediate feature
livepatch: force transition to finish
livepatch: send a fake signal to all blocking tasks
Do not build lib/bpf/bpf.o with this Makefile but use the one from the
library directory. This avoid making a buggy bpf.o file (e.g. missing
symbols).
This patch is useful if some code (e.g. Landlock tests) needs both the
bpf.o (from tools/lib/bpf) and the bpf_load.o (from samples/bpf).
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Avoid extra step of setting limit from cmdline and do it directly in
the program.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Put client sockets in blocking mode otherwise with sendmsg tests
its easy to overrun the socket buffers which results in the test
being aborted.
The original non-blocking was added to handle listen/accept with
a single thread the client/accepted sockets do not need to be
non-blocking.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add a base test that does not use BPF hooks to test baseline case.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Report bytes/sec sent as well as total bytes. Useful to get rough
idea how different configurations and usage patterns perform with
sockmap.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Currently for SENDMSG tests first send completes then recv runs. This
does not work well for large data sizes and/or many iterations. So
fork the recv and send handler so that we run both send and recv. In
the future we can add a parameter to do more than a single fork of
tx/rx.
With this we can get many GBps of data which helps exercise the
sockmap code.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
When testing BPF programs using sockmap I often want to have more
control over how sendmsg is exercised. This becomes even more useful
as new sockmap program types are added.
This adds a test type option to select type of test to run. Currently,
only "ping" and "sendmsg" are supported, but more can be added as
needed.
The new help argument gives the following,
Usage: ./sockmap --cgroup <cgroup_path>
options:
--help -h
--cgroup -c
--rate -r
--verbose -v
--iov_count -i
--length -l
--test -t
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
sockmap sample program takes arguments from cmd line but it reads them
in using offsets into the array. Because we want to add more arguments
in the future lets do proper argument handling.
Also refactor code to pull apart sock init and ping/pong test. This
allows us to add new tests in the future.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The xdp_redirect_cpu sample have some "builtin" monitoring of the
tracepoints for xdp_cpumap_*, but it is practical to have an external
tool that can monitor these transpoint as an easy way to troubleshoot
an application using XDP + cpumap.
Specifically I need such external tool when working on Suricata and
XDP cpumap redirect. Extend the xdp_monitor tool sample with
monitoring of these xdp_cpumap_* tracepoints. Model the output format
like xdp_redirect_cpu.
Given I needed to handle per CPU decoding for cpumap, this patch also
add per CPU info on the existing monitor events. This resembles part
of the builtin monitoring output from sample xdp_rxq_info. Thus, also
covering part of that sample in an external monitoring tool.
Performance wise, the cpumap tracepoints uses bulking, which cause
them to have very little overhead. Thus, they are enabled by default.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Improve the 'unknown reason' comment, with an actual explaination of why
the ctx pkt-data pointers need to be loaded after the helper function
bpf_xdp_adjust_meta(). Based on the explaination Daniel gave.
Fixes: 36e04a2d78 ("samples/bpf: xdp2skb_meta shows transferring info from XDP to SKB")
Reported-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The trailing semicolon is an empty statement that does no operation.
Removing it since it doesn't do anything.
Signed-off-by: Luis de Bethencourt <luisbg@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Immediate flag has been used to disable per-task consistency and patch
all tasks immediately. It could be useful if the patch doesn't change any
function or data semantics.
However, it causes problems on its own. The consistency problem is
currently broken with respect to immediate patches.
func a
patches 1i
2i
3
When the patch 3 is applied, only 2i function is checked (by stack
checking facility). There might be a task sleeping in 1i though. Such
task is migrated to 3, because we do not check 1i in
klp_check_stack_func() at all.
Coming atomic replace feature would be easier to implement and more
reliable without immediate.
Thus, remove immediate feature completely and save us from the problems.
Note that force feature has the similar problem. However it is
considered as a last resort. If used, administrator should not apply any
new live patches and should plan for reboot into an updated kernel.
The architectures would now need to provide HAVE_RELIABLE_STACKTRACE to
fully support livepatch.
Signed-off-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Creating a bpf sample that shows howto use the XDP 'data_meta'
infrastructure, created by Daniel Borkmann. Very few drivers support
this feature, but I wanted a functional sample to begin with, when
working on adding driver support.
XDP data_meta is about creating a communication channel between BPF
programs. This can be XDP tail-progs, but also other SKB based BPF
hooks, like in this case the TC clsact hook. In this sample I show
that XDP can store info named "mark", and TC/clsact chooses to use
this info and store it into the skb->mark.
It is a bit annoying that XDP and TC samples uses different tools/libs
when attaching their BPF hooks. As the XDP and TC programs need to
cooperate and agree on a struct-layout, it is best/easiest if the two
programs can be contained within the same BPF restricted-C file.
As the bpf-loader, I choose to not use bpf_load.c (or libbpf), but
instead wrote a bash shell scripted named xdp2skb_meta.sh, which
demonstrate howto use the iproute cmdline tools 'tc' and 'ip' for
loading BPF programs. To make it easy for first time users, the shell
script have command line parsing, and support --verbose and --dry-run
mode, if you just want to see/learn the tc+ip command syntax:
# ./xdp2skb_meta.sh --dev ixgbe2 --dry-run
# Dry-run mode: enable VERBOSE and don't call TC+IP
tc qdisc del dev ixgbe2 clsact
tc qdisc add dev ixgbe2 clsact
tc filter add dev ixgbe2 ingress prio 1 handle 1 bpf da obj ./xdp2skb_meta_kern.o sec tc_mark
# Flush XDP on device: ixgbe2
ip link set dev ixgbe2 xdp off
ip link set dev ixgbe2 xdp obj ./xdp2skb_meta_kern.o sec xdp_mark
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This sample program can be used for monitoring and reporting how many
packets per sec (pps) are received per NIC RX queue index and which
CPU processed the packet. In itself it is a useful tool for quickly
identifying RSS imbalance issues, see below.
The default XDP action is XDP_PASS in-order to provide a monitor
mode. For benchmarking purposes it is possible to specify other XDP
actions on the cmdline --action.
Output below shows an imbalance RSS case where most RXQ's deliver to
CPU-0 while CPU-2 only get packets from a single RXQ. Looking at
things from a CPU level the two CPUs are processing approx the same
amount, BUT looking at the rx_queue_index levels it is clear that
RXQ-2 receive much better service, than other RXQs which all share CPU-0.
Running XDP on dev:i40e1 (ifindex:3) action:XDP_PASS
XDP stats CPU pps issue-pps
XDP-RX CPU 0 900,473 0
XDP-RX CPU 2 906,921 0
XDP-RX CPU total 1,807,395
RXQ stats RXQ:CPU pps issue-pps
rx_queue_index 0:0 180,098 0
rx_queue_index 0:sum 180,098
rx_queue_index 1:0 180,098 0
rx_queue_index 1:sum 180,098
rx_queue_index 2:2 906,921 0
rx_queue_index 2:sum 906,921
rx_queue_index 3:0 180,098 0
rx_queue_index 3:sum 180,098
rx_queue_index 4:0 180,082 0
rx_queue_index 4:sum 180,082
rx_queue_index 5:0 180,093 0
rx_queue_index 5:sum 180,093
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf-next 2017-12-18
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Allow arbitrary function calls from one BPF function to another BPF function.
As of today when writing BPF programs, __always_inline had to be used in
the BPF C programs for all functions, unnecessarily causing LLVM to inflate
code size. Handle this more naturally with support for BPF to BPF calls
such that this __always_inline restriction can be overcome. As a result,
it allows for better optimized code and finally enables to introduce core
BPF libraries in the future that can be reused out of different projects.
x86 and arm64 JIT support was added as well, from Alexei.
2) Add infrastructure for tagging functions as error injectable and allow for
BPF to return arbitrary error values when BPF is attached via kprobes on
those. This way of injecting errors generically eases testing and debugging
without having to recompile or restart the kernel. Tags for opting-in for
this facility are added with BPF_ALLOW_ERROR_INJECTION(), from Josef.
3) For BPF offload via nfp JIT, add support for bpf_xdp_adjust_head() helper
call for XDP programs. First part of this work adds handling of BPF
capabilities included in the firmware, and the later patches add support
to the nfp verifier part and JIT as well as some small optimizations,
from Jakub.
4) The bpftool now also gets support for basic cgroup BPF operations such
as attaching, detaching and listing current BPF programs. As a requirement
for the attach part, bpftool can now also load object files through
'bpftool prog load'. This reuses libbpf which we have in the kernel tree
as well. bpftool-cgroup man page is added along with it, from Roman.
5) Back then commit e87c6bc385 ("bpf: permit multiple bpf attachments for
a single perf event") added support for attaching multiple BPF programs
to a single perf event. Given they are configured through perf's ioctl()
interface, the interface has been extended with a PERF_EVENT_IOC_QUERY_BPF
command in this work in order to return an array of one or multiple BPF
prog ids that are currently attached, from Yonghong.
6) Various minor fixes and cleanups to the bpftool's Makefile as well
as a new 'uninstall' and 'doc-uninstall' target for removing bpftool
itself or prior installed documentation related to it, from Quentin.
7) Add CONFIG_CGROUP_BPF=y to the BPF kernel selftest config file which is
required for the test_dev_cgroup test case to run, from Naresh.
8) Fix reporting of XDP prog_flags for nfp driver, from Jakub.
9) Fix libbpf's exit code from the Makefile when libelf was not found in
the system, also from Jakub.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Extend the existing tests for ipv4 ipv6 erspan version 2.
Signed-off-by: William Tu <u9012063@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds a basic test for bpf_override_return to verify it works. We
override the main function for mounting a btrfs fs so it'll return
-ENOMEM and then make sure that trying to mount a btrfs fs will fail.
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Now that the SPDX tag is in all kobject files, that identifies the
license in a specific and legally-defined manner. So the extra GPL text
wording can be removed as it is no longer needed at all.
This is done on a quest to remove the 700+ different ways that files in
the kernel describe the GPL license text. And there's unneeded stuff
like the address (sometimes incorrect) for the FSF which is never
needed.
No copyright headers or other non-license-description text was removed.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It's good to have SPDX identifiers in all files to make it easier to
audit the kernel tree for correct licenses.
Update the kobject files files with the correct SPDX license identifier
based on the license text in the file itself. The SPDX identifier is a
legally binding shorthand, which can be used instead of the full boiler
plate text.
This work is based on a script and data from Thomas Gleixner, Philippe
Ombredanne, and Kate Stewart.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Small overlapping change conflict ('net' changed a line,
'net-next' added a line right afterwards) in flexcan.c
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
pull-request: bpf-next 2017-12-03
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Addition of a software model for BPF offloads in order to ease
testing code changes in that area and make semantics more clear.
This is implemented in a new driver called netdevsim, which can
later also be extended for other offloads. SR-IOV support is added
as well to netdevsim. BPF kernel selftests for offloading are
added so we can track basic functionality as well as exercising
all corner cases around BPF offloading, from Jakub.
2) Today drivers have to drop the reference on BPF progs they hold
due to XDP on device teardown themselves. Change this in order
to make XDP handling inside the drivers less error prone, and
move disabling XDP to the core instead, also from Jakub.
3) Misc set of BPF verifier improvements and cleanups as preparatory
work for upcoming BPF-to-BPF calls. Among others, this set also
improves liveness marking such that pruning can be slightly more
effective. Register and stack liveness information is now included
in the verifier log as well, from Alexei.
4) nfp JIT improvements in order to identify load/store sequences in
the BPF prog e.g. coming from memcpy lowering and optimizing them
through the NPU's command push pull (CPP) instruction, from Jiong.
5) Cleanups to test_cgrp2_attach2.c BPF sample code in oder to remove
bpf_prog_attach() magic values and replacing them with actual proper
attach flag instead, from David.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Extend existing tests for vxlan, gre, geneve, ipip, erspan,
to include ip6 gre and gretap tunnel.
Signed-off-by: William Tu <u9012063@gmail.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
pull-request: bpf 2017-12-02
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix a compilation warning in xdp redirect tracepoint due to
missing bpf.h include that pulls in struct bpf_map, from Xie.
2) Limit the maximum number of attachable BPF progs for a given
perf event as long as uabi is not frozen yet. The hard upper
limit is now 64 and therefore the same as with BPF multi-prog
for cgroups. Also add related error checking for the sample
BPF loader when enabling and attaching to the perf event, from
Yonghong.
3) Specifically set the RLIMIT_MEMLOCK for the test_verifier_log
case, so that the test case can always pass and not fail in
some environments due to too low default limit, also from
Yonghong.
4) Fix up a missing license header comment for kernel/bpf/offload.c,
from Jakub.
5) Several fixes for bpftool, among others a crash on incorrect
arguments when json output is used, error message handling
fixes on unknown options and proper destruction of json writer
for some exit cases, all from Quentin.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
load_bpf_file() should fail if ioctl with command
PERF_EVENT_IOC_ENABLE and PERF_EVENT_IOC_SET_BPF fails.
When they do fail, proper error messages are printed.
With this change, the below "syscall_tp" run shows that
the maximum number of bpf progs attaching to the same
perf tracepoint is indeed enforced.
$ ./syscall_tp -i 64
prog #0: map ids 4 5
...
prog #63: map ids 382 383
$ ./syscall_tp -i 65
prog #0: map ids 4 5
...
prog #64: map ids 388 389
ioctl PERF_EVENT_IOC_SET_BPF failed err Argument list too long
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Attach flag 1 == BPF_F_ALLOW_OVERRIDE; attach flag 2 == BPF_F_ALLOW_MULTI.
Update the calls to bpf_prog_attach() in test_cgrp2_attach2.c to use the
names over the magic numbers.
Fixes: 39323e788c ("samples/bpf: add multi-prog cgroup test case")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJaC/4EAAoJEAhfPr2O5OEVQnsP/2JNpdLuzgwNp0p2gXrvK5pl
KOsA6Fld6RNmpuel8eHARbbDTPKF1Y1bvYXVo7lPhXb7KuM2IzG56VxoNech/5pX
eflKwnpV/Ns/ZMLYue7Rqdw0iZnjWESBWf5lzg9MvzwhZBaPlRwqu/aOJy360AZr
FnjKHtU/6WUIOCB8r0qLBDR/epoh7y2lKfjDTcEBrURrFEsTajdyd59npdMSIQqO
iUeeBVEIUKyytYDQNM/VOsBnh0G+2inLuykF8Nd6pYs8O0iUEUpZYwdGuwGUG1HB
VmCcRGU62efl5nu8zQMPnwAvjXwZAh8vbS0ha+B1vBJh1RwNVUz0kKIKEgAaOMZ3
zZa3NLfDP4cHgYtr2Xw2vSvJvDwQecmiItJKeZ/Id4cPy03TKEV1KEaHCQJHwbDn
RP/o9C+5gagMO/oIvZPQ+esVZXQ4prAzOdX53N7HPn4Wn+k4clkI0+hMvMGf67mo
EYOguCqbN2D0e11BLiPP1bRbGZRSI8I9xcKuhcw4ajJHbRRkrjl8EW7V6c8CuMkd
0Wj5oidFleJ0Vy+qQOPqXN1FwR7AbHNtI38JfWNz324AIrFCQERpfXVmKwRPZfl4
YXgGIA9fil3a01YJCtxc0PsXlRkveKJ8hKCLpjXbjNTh1oSbgrDxx5sMx9PO6WqJ
VOb6fL17rwTXlKV/GeU/
=d9nT
-----END PGP SIGNATURE-----
Merge tag 'media/v4.15-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- Documentation for digital TV (both kAPI and uAPI) are now in sync
with the implementation (except for legacy/deprecated ioctls). This
is a major step, as there were always a gap there
- New sensor driver: imx274
- New cec driver: cec-gpio
- New platform driver for rockship rga and tegra CEC
- New RC driver: tango-ir
- Several cleanups at atomisp driver
- Core improvements for RC, CEC, V4L2 async probing support and DVB
- Lots of drivers cleanup, fixes and improvements.
* tag 'media/v4.15-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (332 commits)
dvb_frontend: don't use-after-free the frontend struct
media: dib0700: fix invalid dvb_detach argument
media: v4l2-ctrls: Don't validate BITMASK twice
media: s5p-mfc: fix lockdep warning
media: dvb-core: always call invoke_release() in fe_free()
media: usb: dvb-usb-v2: dvb_usb_core: remove redundant code in dvb_usb_fe_sleep
media: au0828: make const array addr_list static
media: cx88: make const arrays default_addr_list and pvr2000_addr_list static
media: drxd: make const array fastIncrDecLUT static
media: usb: fix spelling mistake: "synchronuously" -> "synchronously"
media: ddbridge: fix build warnings
media: av7110: avoid 2038 overflow in debug print
media: Don't do DMA on stack for firmware upload in the AS102 driver
media: v4l: async: fix unregister for implicitly registered sub-device notifiers
media: v4l: async: fix return of unitialized variable ret
media: imx274: fix missing return assignment from call to imx274_mode_regs
media: camss-vfe: always initialize reg at vfe_set_xbar_cfg()
media: atomisp: make function calls cleaner
media: atomisp: get rid of storage_class.h
media: atomisp: get rid of wrong stddef.h include
...
Pull networking updates from David Miller:
"Highlights:
1) Maintain the TCP retransmit queue using an rbtree, with 1GB
windows at 100Gb this really has become necessary. From Eric
Dumazet.
2) Multi-program support for cgroup+bpf, from Alexei Starovoitov.
3) Perform broadcast flooding in hardware in mv88e6xxx, from Andrew
Lunn.
4) Add meter action support to openvswitch, from Andy Zhou.
5) Add a data meta pointer for BPF accessible packets, from Daniel
Borkmann.
6) Namespace-ify almost all TCP sysctl knobs, from Eric Dumazet.
7) Turn on Broadcom Tags in b53 driver, from Florian Fainelli.
8) More work to move the RTNL mutex down, from Florian Westphal.
9) Add 'bpftool' utility, to help with bpf program introspection.
From Jakub Kicinski.
10) Add new 'cpumap' type for XDP_REDIRECT action, from Jesper
Dangaard Brouer.
11) Support 'blocks' of transformations in the packet scheduler which
can span multiple network devices, from Jiri Pirko.
12) TC flower offload support in cxgb4, from Kumar Sanghvi.
13) Priority based stream scheduler for SCTP, from Marcelo Ricardo
Leitner.
14) Thunderbolt networking driver, from Amir Levy and Mika Westerberg.
15) Add RED qdisc offloadability, and use it in mlxsw driver. From
Nogah Frankel.
16) eBPF based device controller for cgroup v2, from Roman Gushchin.
17) Add some fundamental tracepoints for TCP, from Song Liu.
18) Remove garbage collection from ipv6 route layer, this is a
significant accomplishment. From Wei Wang.
19) Add multicast route offload support to mlxsw, from Yotam Gigi"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2177 commits)
tcp: highest_sack fix
geneve: fix fill_info when link down
bpf: fix lockdep splat
net: cdc_ncm: GetNtbFormat endian fix
openvswitch: meter: fix NULL pointer dereference in ovs_meter_cmd_reply_start
netem: remove unnecessary 64 bit modulus
netem: use 64 bit divide by rate
tcp: Namespace-ify sysctl_tcp_default_congestion_control
net: Protect iterations over net::fib_notifier_ops in fib_seq_sum()
ipv6: set all.accept_dad to 0 by default
uapi: fix linux/tls.h userspace compilation error
usbnet: ipheth: prevent TX queue timeouts when device not ready
vhost_net: conditionally enable tx polling
uapi: fix linux/rxrpc.h userspace compilation errors
net: stmmac: fix LPI transitioning for dwmac4
atm: horizon: Fix irq release error
net-sysfs: trigger netlink notification on ifalias change via sysfs
openvswitch: Using kfree_rcu() to simplify the code
openvswitch: Make local function ovs_nsh_key_attr_size() static
openvswitch: Fix return value check in ovs_meter_cmd_features()
...
Pull livepatching updates from Jiri Kosina:
- shadow variables support, allowing livepatches to associate new
"shadow" fields to existing data structures, from Joe Lawrence
- pre/post patch callbacks API, allowing livepatch writers to register
callbacks to be called before and after patch application, from Joe
Lawrence
* 'for-linus' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching:
livepatch: __klp_disable_patch() should never be called for disabled patches
livepatch: Correctly call klp_post_unpatch_callback() in error paths
livepatch: add transition notices
livepatch: move transition "complete" notice into klp_complete_transition()
livepatch: add (un)patch callbacks
livepatch: Small shadow variable documentation fixes
livepatch: __klp_shadow_get_or_alloc() is local to shadow.c
livepatch: introduce shadow variable API
- proper use of the bool type (Thomas Meyer)
- constification of struct config_item_type (Bhumika Goyal)
-----BEGIN PGP SIGNATURE-----
iQI/BAABCAApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAloLSTALHGhjaEBsc3Qu
ZGUACgkQD55TZVIEUYNxfhAAv3cunxiEPEAvs+1xuGd3cZYaxz7qinvIODPxIKoF
kRWiuy5PUklRMnJ8seOgJ1p1QokX6Sk4cZ8HcctDJVByqODjOq4K5eaKVN1ZqJoz
BUzO/gOqfs64r9yaFIlKfe8nFA+gpUftSeWyv3lThxAIJ1iSbue7OZ/A10tTOS1m
RWp9FPepFv+nJMfWqeQU64BsoDQ4kgZ2NcEA+jFxNx5dlmIbLD49tk0lfddvZQXr
j5WyAH73iugilLtNUGVOqSzHBY4kUvfCKUV7leirCegyMoGhFtA87m6Wzwbo6ZUI
DwQLzWvuPaGv1P2PpNEHfKiNbfIEp75DRyyyf87DD3lc5ffAxQSm28mGuwcr7Rn5
Ow/yWL6ERMzCLExoCzEkXYJISy7T5LIzYDgNggKMpeWxysAduF7Onx7KfW1bTuhK
mHvY7iOXCjEvaIVaF8uMKE6zvuY1vCMRXaJ+kC9jcIE3gwhg+2hmQvrdJ2uAFXY+
rkeF2Poj/JlblPU4IKWAjiPUbzB7Lv0gkypCB2pD4riaYIN5qCAgF8ULIGQp2hsO
lYW1EEgp5FBop85oSO/HAGWeH9dFg0WaV7WqNRVv0AGXhKjgy+bVd7iYPpvs7mGw
z9IqSQDORcG2ETLcFhZgiJpCk/itwqXBD+wgMOjJPP8lL+4kZ8FcuhtY9kc9WlJE
Tew=
=+tMO
-----END PGP SIGNATURE-----
Merge tag 'configfs-for-4.15' of git://git.infradead.org/users/hch/configfs
Pull configfs updates from Christoph Hellwig:
"A couple of configfs cleanups:
- proper use of the bool type (Thomas Meyer)
- constification of struct config_item_type (Bhumika Goyal)"
* tag 'configfs-for-4.15' of git://git.infradead.org/users/hch/configfs:
RDMA/cma: make config_item_type const
stm class: make config_item_type const
ACPI: configfs: make config_item_type const
nvmet: make config_item_type const
usb: gadget: configfs: make config_item_type const
PCI: endpoint: make config_item_type const
iio: make function argument and some structures const
usb: gadget: make config_item_type structures const
dlm: make config_item_type const
netconsole: make config_item_type const
nullb: make config_item_type const
ocfs2/cluster: make config_item_type const
target: make config_item_type const
configfs: make ci_type field, some pointers and function arguments const
configfs: make config_item_type const
configfs: Fix bool initialization/comparison
There are some conflicts between staging and media trees,
as reported by Stephen Rothwell <sfr@canb.auug.org.au>.
So, merge from staging.
* tag 'staging-4.15-rc1': (775 commits)
staging: lustre: add SPDX identifiers to all lustre files
staging: greybus: Remove redundant license text
staging: greybus: add SPDX identifiers to all greybus driver files
staging: ccree: simplify ioread/iowrite
staging: ccree: simplify registers access
staging: ccree: simplify error handling logic
staging: ccree: remove dead code
staging: ccree: handle limiting of DMA masks
staging: ccree: copy IV to DMAable memory
staging: fbtft: remove redundant initialization of buf
staging: sm750fb: Fix parameter mistake in poke32
staging: wilc1000: Fix bssid buffer offset in Txq
staging: fbtft: fb_ssd1331: fix mirrored display
staging: android: Fix checkpatch.pl error
staging: greybus: loopback: convert loopback to use generic async operations
staging: greybus: operation: add private data with get/set accessors
staging: greybus: loopback: Fix iteration count on async path
staging: greybus: loopback: Hold per-connection mutex across operations
staging: greybus/loopback: use ktime_get() for time intervals
staging: fsl-dpaa2/eth: Extra headroom in RX buffers
...
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The assert statement is supposed to be part of the else branch but the
curly braces were accidentally left off.
Fixes: 3e29cd0e65 ("xdp: Sample xdp program implementing ip forward")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull perf updates from Ingo Molnar:
"The main changes in this cycle were:
Kernel:
- kprobes updates: use better W^X patterns for code modifications,
improve optprobes, remove jprobes. (Masami Hiramatsu, Kees Cook)
- core fixes: event timekeeping (enabled/running times statistics)
fixes, perf_event_read() locking fixes and cleanups, etc. (Peter
Zijlstra)
- Extend x86 Intel free-running PEBS support and support x86
user-register sampling in perf record and perf script. (Andi Kleen)
Tooling:
- Completely rework the way inline frames are handled. Instead of
querying for the inline nodes on-demand in the individual tools, we
now create proper callchain nodes for inlined frames. (Milian
Wolff)
- 'perf trace' updates (Arnaldo Carvalho de Melo)
- Implement a way to print formatted output to per-event files in
'perf script' to facilitate generate flamegraphs, elliminating the
need to write scripts to do that separation (yuzhoujian, Arnaldo
Carvalho de Melo)
- Update vendor events JSON metrics for Intel's Broadwell, Broadwell
Server, Haswell, Haswell Server, IvyBridge, IvyTown, JakeTown,
Sandy Bridge, Skylake, SkyLake Server - and Goldmont Plus V1 (Andi
Kleen, Kan Liang)
- Multithread the synthesizing of PERF_RECORD_ events for
pre-existing threads in 'perf top', speeding up that phase, greatly
improving the user experience in systems such as Intel's Knights
Mill (Kan Liang)
- Introduce the concept of weak groups in 'perf stat': try to set up
a group, but if it's not schedulable fallback to not using a group.
That gives us the best of both worlds: groups if they work, but
still a usable fallback if they don't. E.g: (Andi Kleen)
- perf sched timehist enhancements (David Ahern)
- ... various other enhancements, updates, cleanups and fixes"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (139 commits)
kprobes: Don't spam the build log with deprecation warnings
arm/kprobes: Remove jprobe test case
arm/kprobes: Fix kretprobe test to check correct counter
perf srcline: Show correct function name for srcline of callchains
perf srcline: Fix memory leak in addr2inlines()
perf trace beauty kcmp: Beautify arguments
perf trace beauty: Implement pid_fd beautifier
tools include uapi: Grab a copy of linux/kcmp.h
perf callchain: Fix double mapping al->addr for children without self period
perf stat: Make --per-thread update shadow stats to show metrics
perf stat: Move the shadow stats scale computation in perf_stat__update_shadow_stats
perf tools: Add perf_data_file__write function
perf tools: Add struct perf_data_file
perf tools: Rename struct perf_data_file to perf_data
perf script: Print information about per-event-dump files
perf trace beauty prctl: Generate 'option' string table from kernel headers
tools include uapi: Grab a copy of linux/prctl.h
perf script: Allow creating per-event dump files
perf evsel: Restore evsel->priv as a tool private area
perf script: Use event_format__fprintf()
...
Pull core locking updates from Ingo Molnar:
"The main changes in this cycle are:
- Another attempt at enabling cross-release lockdep dependency
tracking (automatically part of CONFIG_PROVE_LOCKING=y), this time
with better performance and fewer false positives. (Byungchul Park)
- Introduce lockdep_assert_irqs_enabled()/disabled() and convert
open-coded equivalents to lockdep variants. (Frederic Weisbecker)
- Add down_read_killable() and use it in the VFS's iterate_dir()
method. (Kirill Tkhai)
- Convert remaining uses of ACCESS_ONCE() to
READ_ONCE()/WRITE_ONCE(). Most of the conversion was Coccinelle
driven. (Mark Rutland, Paul E. McKenney)
- Get rid of lockless_dereference(), by strengthening Alpha atomics,
strengthening READ_ONCE() with smp_read_barrier_depends() and thus
being able to convert users of lockless_dereference() to
READ_ONCE(). (Will Deacon)
- Various micro-optimizations:
- better PV qspinlocks (Waiman Long),
- better x86 barriers (Michael S. Tsirkin)
- better x86 refcounts (Kees Cook)
- ... plus other fixes and enhancements. (Borislav Petkov, Juergen
Gross, Miguel Bernal Marin)"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (70 commits)
locking/x86: Use LOCK ADD for smp_mb() instead of MFENCE
rcu: Use lockdep to assert IRQs are disabled/enabled
netpoll: Use lockdep to assert IRQs are disabled/enabled
timers/posix-cpu-timers: Use lockdep to assert IRQs are disabled/enabled
sched/clock, sched/cputime: Use lockdep to assert IRQs are disabled/enabled
irq_work: Use lockdep to assert IRQs are disabled/enabled
irq/timings: Use lockdep to assert IRQs are disabled/enabled
perf/core: Use lockdep to assert IRQs are disabled/enabled
x86: Use lockdep to assert IRQs are disabled/enabled
smp/core: Use lockdep to assert IRQs are disabled/enabled
timers/hrtimer: Use lockdep to assert IRQs are disabled/enabled
timers/nohz: Use lockdep to assert IRQs are disabled/enabled
workqueue: Use lockdep to assert IRQs are disabled/enabled
irq/softirqs: Use lockdep to assert IRQs are disabled/enabled
locking/lockdep: Add IRQs disabled/enabled assertion APIs: lockdep_assert_irqs_enabled()/disabled()
locking/pvqspinlock: Implement hybrid PV queued/unfair locks
locking/rwlocks: Fix comments
x86/paravirt: Set up the virt_spin_lock_key after static keys get initialized
block, locking/lockdep: Assign a lock_class per gendisk used for wait_for_completion()
workqueue: Remove now redundant lock acquisitions wrt. workqueue flushes
...
Pull s390 updates from Heiko Carstens:
"Since Martin is on vacation you get the s390 pull request for the
v4.15 merge window this time from me.
Besides a lot of cleanups and bug fixes these are the most important
changes:
- a new regset for runtime instrumentation registers
- hardware accelerated AES-GCM support for the aes_s390 module
- support for the new CEX6S crypto cards
- support for FORTIFY_SOURCE
- addition of missing z13 and new z14 instructions to the in-kernel
disassembler
- generate opcode tables for the in-kernel disassembler out of a
simple text file instead of having to manually maintain those
tables
- fast memset16, memset32 and memset64 implementations
- removal of named saved segment support
- hardware counter support for z14
- queued spinlocks and queued rwlocks implementations for s390
- use the stack_depth tracking feature for s390 BPF JIT
- a new s390_sthyi system call which emulates the sthyi (store
hypervisor information) instruction
- removal of the old KVM virtio transport
- an s390 specific CPU alternatives implementation which is used in
the new spinlock code"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (88 commits)
MAINTAINERS: add virtio-ccw.h to virtio/s390 section
s390/noexec: execute kexec datamover without DAT
s390: fix transactional execution control register handling
s390/bpf: take advantage of stack_depth tracking
s390: simplify transactional execution elf hwcap handling
s390/zcrypt: Rework struct ap_qact_ap_info.
s390/virtio: remove unused header file kvm_virtio.h
s390: avoid undefined behaviour
s390/disassembler: generate opcode tables from text file
s390/disassembler: remove insn_to_mnemonic()
s390/dasd: avoid calling do_gettimeofday()
s390: vfio-ccw: Do not attempt to free no-op, test and tic cda.
s390: remove named saved segment support
s390/archrandom: Reconsider s390 arch random implementation
s390/pci: do not require AIS facility
s390/qdio: sanitize put_indicator
s390/qdio: use atomic_cmpxchg
s390/nmi: avoid using long-displacement facility
s390: pass endianness info to sparse
s390/decompressor: remove informational messages
...
- The old driver statement has been added to the kernel docs.
- We have a couple of new helper scripts. find-unused-docs.sh from Sayli
Karnic will point out kerneldoc comments that are not actually used in
the documentation. Jani Nikula's documentation-file-ref-check finds
references to non-existing files.
- A new ftrace document from Steve Rostedt.
- Vinod Koul converted the dmaengine docs to RST
Beyond that, it's mostly simple fixes.
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJaCK37AAoJEI3ONVYwIuV63nwQALeqzVwGqqTwiyRyMqgEwMQM
je/6IurEwTHtyfwtW/mztCfNid1CLTiYZg7RET3/zlHjcUI/9VlV2dbBksGFgoQo
muHGqhwTJjXYREwjK3FkzrGckRsVZKJgdzmZYgukCCY6Ir7IffwJKYaLOCZN1S/l
4nBHQpt2nITo0WhdmZjaNRKOQxMA8nN5yGpOIl0neGE6ywIUMgauCCCHhxnOPVWg
ant1HliS8WR8Tizqt9wQgLCvs5lvklsBFibZPO9LBTPG2Zy3HIO9kb+npUAh2MTl
j0Wg39zzOFvVVErqErqUIwIuQ9IrfltHrEHYYoruTvDBXBiMKIcwApF+DS+H3WSp
TnDu3Qif4llM5SZsZGvcjawXNnbck+7SYOe9cyqpylV3SWMWrEX1tbUv6zVuVk+7
fencYBvEZgkJmWbjDeO/Z4S50STxRTzIxFwZgLft7g/RiHo9HvlubjjwQTqBFjxA
fVkolN7h69MGkrD8TF19eapyujqSXaNYH0pFYo87JNOjLgYmezUHyvHd8YeZJL31
Ll0h10HqSNVzJsjFolBMgrC3CcVjsEXdBufu0yVk45sAg9ZiMYOCpwa6Rtp+tfxa
uIBf1LKzfWSa0ocKx7+sMJt0B/CXwU3AMtsbYGyDhFhR2r3cp1NWBHf5nisz9etD
2Md9RDFAMLELZurewB9Q
=H6ud
-----END PGP SIGNATURE-----
Merge tag 'docs-4.15' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"A relatively calm cycle for the docs tree again.
- The old driver statement has been added to the kernel docs.
- We have a couple of new helper scripts. find-unused-docs.sh from
Sayli Karnic will point out kerneldoc comments that are not actually
used in the documentation. Jani Nikula's
documentation-file-ref-check finds references to non-existing files.
- A new ftrace document from Steve Rostedt.
- Vinod Koul converted the dmaengine docs to RST
Beyond that, it's mostly simple fixes.
This set reaches outside of Documentation/ a bit more than most. In
all cases, the changes are to comment docs, mostly from Randy, in
places where there didn't seem to be anybody better to take them"
* tag 'docs-4.15' of git://git.lwn.net/linux: (52 commits)
documentation: fb: update list of available compiled-in fonts
MAINTAINERS: update DMAengine documentation location
dmaengine: doc: ReSTize pxa_dma doc
dmaengine: doc: ReSTize dmatest doc
dmaengine: doc: ReSTize client API doc
dmaengine: doc: ReSTize provider doc
dmaengine: doc: Add ReST style dmaengine document
ftrace/docs: Add documentation on how to use ftrace from within the kernel
bug-hunting.rst: Fix an example and a typo in a Sphinx tag
scripts: Add a script to find unused documentation
samples: Convert timers to use timer_setup()
documentation: kernel-api: add more info on bitmap functions
Documentation: fix selftests related file refs
Documentation: fix ref to power basic-pm-debugging
Documentation: fix ref to trace stm content
Documentation: fix ref to coccinelle content
Documentation: fix ref to workqueue content
Documentation: fix ref to sphinx/kerneldoc.py
Documentation: fix locking rt-mutex doc refs
docs: dev-tools: correct Coccinelle version number
...
The program was returning -1 in some cases which is not allowed
by the verifier any longer.
Fixes: 390ee7e29f ("bpf: enforce return code for cgroup-bpf programs")
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The program was returning -1 in some cases which is not allowed
by the verifier any longer.
Fixes: 390ee7e29f ("bpf: enforce return code for cgroup-bpf programs")
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The program was returning -1 in some cases which is not allowed
by the verifier any longer.
Fixes: 390ee7e29f ("bpf: enforce return code for cgroup-bpf programs")
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The program was returning -1 in some cases which is not allowed
by the verifier any longer.
Fixes: 390ee7e29f ("bpf: enforce return code for cgroup-bpf programs")
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The program was returning -1 in some cases which is not allowed
by the verifier any longer.
Fixes: 390ee7e29f ("bpf: enforce return code for cgroup-bpf programs")
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The program was returning -1 in some cases which is not allowed
by the verifier any longer.
Fixes: 390ee7e29f ("bpf: enforce return code for cgroup-bpf programs")
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds a basic test for bpf_override_return to verify it works. We
override the main function for mounting a btrfs fs so it'll return
-ENOMEM and then make sure that trying to mount a btrfs fs will fail.
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The original patch had the wrong filename.
Fixes: bfdf756938 ("bpf: create samples/bpf/tcp_bpf.readme")
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implements port to port forwarding with route table and arp table
lookup for ipv4 packets using bpf_redirect helper function and
lpm_trie map.
Signed-off-by: Christina Jacob <Christina.Jacob@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The purpose of this move is to use these files in bpf tests.
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Files removed in 'net-next' had their license header updated
in 'net'. We take the remove from 'net-next'.
Signed-off-by: David S. Miller <davem@davemloft.net>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWfswbQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykvEwCfXU1MuYFQGgMdDmAZXEc+xFXZvqgAoKEcHDNA
6dVh26uchcEQLN/XqUDt
=x306
-----END PGP SIGNATURE-----
Merge tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull initial SPDX identifiers from Greg KH:
"License cleanup: add SPDX license identifiers to some files
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the
'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally
binding shorthand, which can be used instead of the full boiler plate
text.
This patch is based on work done by Thomas Gleixner and Kate Stewart
and Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset
of the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to
license had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied
to a file was done in a spreadsheet of side by side results from of
the output of two independent scanners (ScanCode & Windriver)
producing SPDX tag:value files created by Philippe Ombredanne.
Philippe prepared the base worksheet, and did an initial spot review
of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537
files assessed. Kate Stewart did a file by file comparison of the
scanner results in the spreadsheet to determine which SPDX license
identifier(s) to be applied to the file. She confirmed any
determination that was not immediately clear with lawyers working with
the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained
>5 lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that
was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that
became the concluded license(s).
- when there was disagreement between the two scanners (one detected
a license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply
(and which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases,
confirmation by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.
The Windriver scanner is based on an older version of FOSSology in
part, so they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot
checks in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect
the correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial
patch version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch
license was not GPL-2.0 WITH Linux-syscall-note to ensure that the
applied SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
* tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
License cleanup: add SPDX license identifier to uapi header files with a license
License cleanup: add SPDX license identifier to uapi header files with no license
License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since commit 0f06a6787e ("samples: Add an IPv6 '-6' option to the
pktgen scripts") the newer pktgen_sampleXX script does show howto use
IPv6 with pktgen.
Thus, there is no longer a reason to keep the older sample scripts around.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Like sample05, don't use pktgen clone_skb feature when using 'burst' feature,
it is not really needed. This brings the burst users in sync.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This script simply does:
* Detect $DEV's NUMA node belonging.
* Bind each thread (processor of NUMA locality) with each $DEV queue's
irq affinity, 1:1 mapping.
* How many '-t' threads input determines how many queues will be utilized.
If '-f' designates first cpu id, then offset in the NUMA node's cpu list.
(Changes by Jesper: allow changing count from cmdline via '-n')
Signed-off-by: Robert Hoo <robert.hu@intel.com>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
1. given a device, get its NUMA belongings
2. given a device, get its queues' irq numbers.
3. given a NUMA node, get its cpu id list.
Signed-off-by: Robert Hoo <robert.hu@intel.com>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Several conflicts here.
NFP driver bug fix adding nfp_netdev_is_nfp_repr() check to
nfp_fl_output() needed some adjustments because the code block is in
an else block now.
Parallel additions to net/pkt_cls.h and net/sch_generic.h
A bug fix in __tcp_retransmit_skb() conflicted with some of
the rbtree changes in net-next.
The tc action RCU callback fixes in 'net' had some overlap with some
of the recent tcf_block reworking.
Signed-off-by: David S. Miller <davem@davemloft.net>
Default rlimit RLIMIT_MEMLOCK is 64KB, causes bpf map failure.
e.g.
[root@labbpf]# ./xdp_redirect_map $(</sys/class/net/eth2/ifindex) \
> $(</sys/class/net/eth3/ifindex)
failed to create a map: 1 Operation not permitted
The failure is 100% when multiple xdp programs are running. Fix it.
Signed-off-by: Tushar Dave <tushar.n.dave@oracle.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Default rlimit RLIMIT_MEMLOCK is 64KB, causes bpf map failure.
e.g.
[root@lab bpf]#./xdp1 -N $(</sys/class/net/eth2/ifindex)
failed to create a map: 1 Operation not permitted
Fix it.
Signed-off-by: Tushar Dave <tushar.n.dave@oracle.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 6575257c60 ("tracing/samples: Fix creation and deletion of
simple_thread_fn creation") introduced a new warning due to using a
boolean as a counter.
Just make it "int".
Fixes: 6575257c60 ("tracing/samples: Fix creation and deletion of simple_thread_fn creation")
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
For several reasons, it is desirable to use {READ,WRITE}_ONCE() in
preference to ACCESS_ONCE(), and new code is expected to use one of the
former. So far, there's been no reason to change most existing uses of
ACCESS_ONCE(), as these aren't currently harmful.
However, for some features it is necessary to instrument reads and
writes separately, which is not possible with ACCESS_ONCE(). This
distinction is critical to correct operation.
The bulk of the kernel code can be transformed via Coccinelle to use
{READ,WRITE}_ONCE(), though this only modifies users of ACCESS_ONCE(),
and not the implementation itself. As such, it has the potential to
break homebrew ACCESS_ONCE() macros seen in some user code in the kernel
tree (e.g. the virtio code, as fixed in commit ea9156fb3b).
To avoid fragility if/when that transformation occurs, and to align with
the preferred usage of {READ,WRITE}_ONCE(), this patch updates the MPSSD
sample code to use READ_ONCE() rather than ACCESS_ONCE(). There should
be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: davem@davemloft.net
Cc: linux-arch@vger.kernel.org
Cc: mpe@ellerman.id.au
Cc: snitzer@redhat.com
Cc: thor.thayer@linux.intel.com
Cc: tj@kernel.org
Cc: viro@zeniv.linux.org.uk
Cc: will.deacon@arm.com
Link: http://lkml.kernel.org/r/1508792849-3115-10-git-send-email-paulmck@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The bpf sample program syscall_tp is modified to
show attachment of more than bpf programs
for a particular kernel tracepoint.
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There were quite a few overlapping sets of changes here.
Daniel's bug fix for off-by-ones in the new BPF branch instructions,
along with the added allowances for "data_end > ptr + x" forms
collided with the metadata additions.
Along with those three changes came veritifer test cases, which in
their final form I tried to group together properly. If I had just
trimmed GIT's conflict tags as-is, this would have split up the
meta tests unnecessarily.
In the socketmap code, a set of preemption disabling changes
overlapped with the rename of bpf_compute_data_end() to
bpf_compute_data_pointers().
Changes were made to the mv88e6060.c driver set addr method
which got removed in net-next.
The hyperv transport socket layer had a locking change in 'net'
which overlapped with a change of socket state macro usage
in 'net-next'.
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from David Miller:
"A little more than usual this time around. Been travelling, so that is
part of it.
Anyways, here are the highlights:
1) Deal with memcontrol races wrt. listener dismantle, from Eric
Dumazet.
2) Handle page allocation failures properly in nfp driver, from Jaku
Kicinski.
3) Fix memory leaks in macsec, from Sabrina Dubroca.
4) Fix crashes in pppol2tp_session_ioctl(), from Guillaume Nault.
5) Several fixes in bnxt_en driver, including preventing potential
NVRAM parameter corruption from Michael Chan.
6) Fix for KRACK attacks in wireless, from Johannes Berg.
7) rtnetlink event generation fixes from Xin Long.
8) Deadlock in mlxsw driver, from Ido Schimmel.
9) Disallow arithmetic operations on context pointers in bpf, from
Jakub Kicinski.
10) Missing sock_owned_by_user() check in sctp_icmp_redirect(), from
Xin Long.
11) Only TCP is supported for sockmap, make that explicit with a
check, from John Fastabend.
12) Fix IP options state races in DCCP and TCP, from Eric Dumazet.
13) Fix panic in packet_getsockopt(), also from Eric Dumazet.
14) Add missing locked in hv_sock layer, from Dexuan Cui.
15) Various aquantia bug fixes, including several statistics handling
cures. From Igor Russkikh et al.
16) Fix arithmetic overflow in devmap code, from John Fastabend.
17) Fix busted socket memory accounting when we get a fault in the tcp
zero copy paths. From Willem de Bruijn.
18) Don't leave opt->tot_len uninitialized in ipv6, from Eric Dumazet"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (106 commits)
stmmac: Don't access tx_q->dirty_tx before netif_tx_lock
ipv6: flowlabel: do not leave opt->tot_len with garbage
of_mdio: Fix broken PHY IRQ in case of probe deferral
textsearch: fix typos in library helpers
rxrpc: Don't release call mutex on error pointer
net: stmmac: Prevent infinite loop in get_rx_timestamp_status()
net: stmmac: Fix stmmac_get_rx_hwtstamp()
net: stmmac: Add missing call to dev_kfree_skb()
mlxsw: spectrum_router: Configure TIGCR on init
mlxsw: reg: Add Tunneling IPinIP General Configuration Register
net: ethtool: remove error check for legacy setting transceiver type
soreuseport: fix initialization race
net: bridge: fix returning of vlan range op errors
sock: correct sk_wmem_queued accounting on efault in tcp zerocopy
bpf: add test cases to bpf selftests to cover all access tests
bpf: fix pattern matches for direct packet access
bpf: fix off by one for range markings with L{T, E} patterns
bpf: devmap fix arithmetic overflow in bitmap_size calculation
net: aquantia: Bad udp rate on default interrupt coalescing
net: aquantia: Enable coalescing management via ethtool interface
...
Readme file explaining how to create a cgroupv2 and attach one
of the tcp_*_kern.o socket_ops BPF program.
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked_by: Alexei Starovoitov <ast@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sample socket_ops BPF program to test the BPF helper function
bpf_getsocketops and the new socket_ops op BPF_SOCKET_OPS_BASE_RTT.
The program provides a base RTT of 80us when the calling flow is
within a DC (as determined by the IPV6 prefix) and the congestion
algorithm is "nv".
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked_by: Alexei Starovoitov <ast@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
SK_SKB BPF programs are run from the socket/tcp context but early in
the stack before much of the TCP metadata is needed in tcp_skb_cb. So
we can use some unused fields to place BPF metadata needed for SK_SKB
programs when implementing the redirect function.
This allows us to drop the preempt disable logic. It does however
require an API change so sk_redirect_map() has been updated to
additionally provide ctx_ptr to skb. Note, we do however continue to
disable/enable preemption around actual BPF program running to account
for map updates.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Make config_item_type structures const as they are either passed to a
function having the argument as const or stored in the const "ci_type"
field of a config_item structure.
Done using Coccinelle.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Provide livepatch modules a klp_object (un)patching notification
mechanism. Pre and post-(un)patch callbacks allow livepatch modules to
setup or synchronize changes that would be difficult to support in only
patched-or-unpatched code contexts.
Callbacks can be registered for target module or vmlinux klp_objects,
but each implementation is klp_object specific.
- Pre-(un)patch callbacks run before any (un)patching transition
starts.
- Post-(un)patch callbacks run once an object has been (un)patched and
the klp_patch fully transitioned to its target state.
Example use cases include modification of global data and registration
of newly available services/handlers.
See Documentation/livepatch/callbacks.txt for details and
samples/livepatch/ for examples.
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This sample program show how to use cpumap and the associated
tracepoints.
It provides command line stats, which shows how the XDP-RX process,
cpumap-enqueue and cpumap kthread dequeue is cooperating on a per CPU
basis. It also utilize the xdp_exception and xdp_redirect_err
transpoints to allow users quickly to identify setup issues.
One issue with ixgbe driver is that the driver reset the link when
loading XDP. This reset the procfs smp_affinity settings. Thus,
after loading the program, these must be reconfigured. The easiest
workaround it to reduce the RX-queue to e.g. two via:
# ethtool --set-channels ixgbe1 combined 2
And then add CPUs above 0 and 1, like:
# xdp_redirect_cpu --dev ixgbe1 --prog 2 --cpu 2 --cpu 3 --cpu 4
Another issue with ixgbe is that the page recycle mechanism is tied to
the RX-ring size. And the default setting of 512 elements is too
small. This is the same issue with regular devmap XDP_REDIRECT.
To overcome this I've been using 1024 rx-ring size:
# ethtool -G ixgbe1 rx 1024 tx 1024
V3:
- whitespace cleanups
- bpf tracepoint cannot access top part of struct
V4:
- report on kthread sched events, according to tracepoint change
- report average bulk enqueue size
V5:
- bpf_map_lookup_elem on cpumap not allowed from bpf_prog
use separate map to mark CPUs not available
V6:
- correct kthread sched summary output
V7:
- Added a --stress-mode for concurrently changing underlying cpumap
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
# modprobe trace-events-sample
# echo 1 > /sys/kernel/debug/tracing/events/sample-trace/enable
# rmmod trace-events-sample
This would cause an oops. The issue is that I added another trace
event sample that reused a reg function of another trace event to
create a thread to call the tracepoints. The problem was that the
reg function couldn't handle nested calls (reg; reg; unreg; unreg;)
and created two threads (instead of one) and only removed one
on exit.
This isn't a critical bug as the bug is only in sample code. But sample
code should be free of known bugs to prevent others from copying
it. This is why this is also marked for stable.
-----BEGIN PGP SIGNATURE-----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=xSts
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fix from Steven Rostedt:
"Testing a new trace event format, I triggered a bug by doing:
# modprobe trace-events-sample
# echo 1 > /sys/kernel/debug/tracing/events/sample-trace/enable
# rmmod trace-events-sample
This would cause an oops. The issue is that I added another trace
event sample that reused a reg function of another trace event to
create a thread to call the tracepoints. The problem was that the reg
function couldn't handle nested calls (reg; reg; unreg; unreg;) and
created two threads (instead of one) and only removed one on exit.
This isn't a critical bug as the bug is only in sample code. But
sample code should be free of known bugs to prevent others from
copying it. This is why this is also marked for stable"
* tag 'trace-v4.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing/samples: Fix creation and deletion of simple_thread_fn creation
Commit 7496946a8 ("tracing: Add samples of DECLARE_EVENT_CLASS() and
DEFINE_EVENT()") added template examples for all the events. It created a
DEFINE_EVENT_FN() example which reused the foo_bar_reg and foo_bar_unreg
functions.
Enabling both the TRACE_EVENT_FN() and DEFINE_EVENT_FN() example trace
events caused the foo_bar_reg to be called twice, creating the test thread
twice. The foo_bar_unreg would remove it only once, even if it was called
multiple times, leaving a thread existing when the module is unloaded,
causing an oops.
Add a ref count and allow foo_bar_reg() and foo_bar_unreg() be called by
multiple trace events.
Cc: stable@vger.kernel.org
Fixes: 7496946a8 ("tracing: Add samples of DECLARE_EVENT_CLASS() and DEFINE_EVENT()")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Update to llvm excludes assembly instructions.
llvm git revision is below
commit 65fad7c26569 ("bpf: add inline-asm support")
This change will be part of llvm release 6.0
__ASM_SYSREG_H define is not required for native compile.
-target switch includes appropriate target specific files
while cross compiling
Tested on x86 and arm64.
Signed-off-by: Abhijit Ayarekar <abhijit.ayarekar@caviumnetworks.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The trace sample file has a couple mispellings, lets fix them.
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The bpf sample program trace_event is enhanced to use the new
helper to print out enabled/running time.
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Alexei Starovoitov <ast@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The bpf sample program tracex6 is enhanced to use the new
helper to read enabled/running time as well.
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Alexei Starovoitov <ast@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Other concurrent running programs, like perf or the XDP program what
needed to be monitored, might take up part of the max locked memory
limit. Thus, the xdp_monitor tool have to set the RLIMIT_MEMLOCK to
RLIM_INFINITY, as it cannot determine a more sane limit.
Using the man exit(3) specified EXIT_FAILURE return exit code, and
correct other users too.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Also monitor the tracepoint xdp_exception. This tracepoint is usually
invoked by the drivers. Programs themselves can activate this by
returning XDP_ABORTED, which will drop the packet but also trigger the
tracepoint. This is useful for distinguishing intentional (XDP_DROP)
vs. ebpf-program error cases that cased a drop (XDP_ABORTED).
Drivers also use this tracepoint for reporting on XDP actions that are
unknown to the specific driver. This can help the user to detect if a
driver e.g. doesn't implement XDP_REDIRECT yet.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The first 8 bytes of the tracepoint context struct are not accessible
by the bpf code. This is a choice that dates back to the original
inclusion of this code.
See explaination in:
commit 98b5c2c65c ("perf, bpf: allow bpf programs attach to tracepoints")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
use BPF_PROG_QUERY command to strengthen test coverage
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
create 5 cgroups, attach 6 progs and check that progs are executed as:
cgrp1 (MULTI progs A, B) ->
cgrp2 (OVERRIDE prog C) ->
cgrp3 (MULTI prog D) ->
cgrp4 (OVERRIDE prog E) ->
cgrp5 (NONE prog F)
the event in cgrp5 triggers execution of F,D,A,B in that order.
if prog F is detached, the execution is E,D,A,B
if prog F and D are detached, the execution is E,A,B
if prog F, E and D are detached, the execution is C,A,B
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
If this memory allocation fails, we must release some resources, as
already done in the code below and above.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Make this const as it is only passed to a const argument of the function
mdev_register_device. Make it static as it is not referenced in any
other file.
Structure found using Coccinelle and changes done by hand.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Make local functions static to fix
HOSTCC samples/bpf/xdp_monitor_user.o
samples/bpf/xdp_monitor_user.c:64:7: warning: no previous prototype for ‘gettime’ [-Wmissing-prototypes]
__u64 gettime(void)
^~~~~~~
samples/bpf/xdp_monitor_user.c:209:6: warning: no previous prototype for ‘print_bpf_prog_info’ [-Wmissing-prototypes]
void print_bpf_prog_info(void)
^~~~~~~~~~~~~~~~~~~
Fixes: 3ffab54602 ("samples/bpf: xdp_monitor tool based on tracepoints")
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch extends the libbpf to provide API support to
allow specifying BPF object name.
In tools/lib/bpf/libbpf, the C symbol of the function
and the map is used. Regarding section name, all maps are
under the same section named "maps". Hence, section name
is not a good choice for map's name. To be consistent with
map, bpf_prog also follows and uses its function symbol as
the prog's name.
This patch adds logic to collect function's symbols in libbpf.
There is existing codes to collect the map's symbols and no change
is needed.
The bpf_load_program_name() and bpf_map_create_name() are
added to take the name argument. For the other bpf_map_create_xxx()
variants, a name argument is directly added to them.
In samples/bpf, bpf_load.c in particular, the symbol is also
used as the map's name and the map symbols has already been
collected in the existing code. For bpf_prog, bpf_load.c does
not collect the function symbol name. We can consider to collect
them later if there is a need to continue supporting the bpf_load.c.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Alexei Starovoitov <ast@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add info prints in sample kprobe handlers for S/390
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Joel Fernandes <joelaf@google.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
BPF samples fail to build when cross-compiling for ARM64 because of incorrect
pt_regs param selection. This is because clang defines __x86_64__ and
bpf_headers thinks we're building for x86. Since clang is building for the BPF
target, it shouldn't make assumptions about what target the BPF program is
going to run on. To fix this, lets pass ARCH so the header knows which target
the BPF program is being compiled for and can use the correct pt_regs code.
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Joel Fernandes <joelaf@google.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
When cross compiling, bpf samples use HOSTCC for compiling the non-BPF part of
the sample, however what we really want is to use the cross compiler to build
for the cross target since that is what will load and run the BPF sample.
Detect this and compile samples correctly.
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Joel Fernandes <joelaf@google.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
When cross-compiling the bpf sample map_perf_test for aarch64, I find that
__NR_getpgrp is undefined. This causes build errors. This syscall is deprecated
and requires defining __ARCH_WANT_SYSCALL_DEPRECATED. To avoid having to define
that, just use a different syscall (getppid) for the array map stress test.
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Joel Fernandes <joelaf@google.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add exported API for livepatch modules:
klp_shadow_get()
klp_shadow_alloc()
klp_shadow_get_or_alloc()
klp_shadow_free()
klp_shadow_free_all()
that implement "shadow" variables, which allow callers to associate new
shadow fields to existing data structures. This is intended to be used
by livepatch modules seeking to emulate additions to data structure
definitions.
See Documentation/livepatch/shadow-vars.txt for a summary of the new
shadow variable API, including a few common use cases.
See samples/livepatch/livepatch-shadow-* for example modules that
demonstrate shadow variables.
[jkosina@suse.cz: fix __klp_shadow_get_or_alloc() comment as spotted by
Josh]
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
-----BEGIN PGP SIGNATURE-----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=fNM2
-----END PGP SIGNATURE-----
Merge tag 'media/v4.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
"Brazil's Independence Day pull request :-)
This is one of the biggest media pull requests, with 625 patches
affecting almost all parts of media (RC, DVB, V4L2, CEC, docs).
This contains:
- A lot of new drivers:
* DVB frontends: mxl5xx, stv0910, stv6111;
* camera flash: as3645a led driver;
* HDMI receiver: adv748X;
* camera sensor: Omnivision 6650 5M driver (ov6650);
* HDMI CEC: ao-cec meson driver;
* V4L2: Qualcom camss driver;
* Remote controller: gpio-ir-tx, pwm-ir-tx and zx-irdec drivers.
- The DDbridge DVB driver got a massive update, with makes it in sync
with modern hardware from that vendor;
- There's an important milestone on this series: the DVB
documentation was written in 2003, but only started to be updated
in 2007. It also used to contain several gaps from the time it was
kept out of tree, mentioning error codes and device nodes that
never existed upstream. On this series, it received a massive
update: all non-deprecated digital TV APIs are now in sync with the
current implementation;
- Some DVB APIs that aren't used by any upstream driver got removed;
- Other parts of the media documentation algo got updated, fixing
some bugs on its PDF output and making it compatible with Sphinx
version 1.6.
As the number of hacks required to build PDF output reduced, I hope
we'll have less troubles as newer versions of our documentation
toolchain are released (famous last words);
- As usual, lots of driver cleanups and improvements"
* tag 'media/v4.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (624 commits)
media: leds: as3645a: add V4L2_FLASH_LED_CLASS dependency
media: get rid of removed DMX_GET_CAPS and DMX_SET_SOURCE leftovers
media: Revert "[media] v4l: async: make v4l2 coexist with devicetree nodes in a dt overlay"
media: staging: atomisp: sh_css_calloc shall return a pointer to the allocated space
media: Revert "[media] lirc_dev: remove superfluous get/put_device() calls"
media: add qcom_camss.rst to v4l-drivers rst file
media: dvb headers: make checkpatch happier
media: dvb uapi: move frontend legacy API to another part of the book
media: pixfmt-srggb12p.rst: better format the table for PDF output
media: docs-rst: media: Don't use \small for V4L2_PIX_FMT_SRGGB10 documentation
media: index.rst: don't write "Contents:" on PDF output
media: pixfmt*.rst: replace a two dots by a comma
media: vidioc-g-fmt.rst: adjust table format
media: vivid.rst: add a blank line to correct ReST format
media: v4l2 uapi book: get rid of driver programming's chapter
media: format.rst: use the right markup for important notes
media: docs-rst: cardlists: change their format to flat-tables
media: em28xx-cardlist.rst: update to reflect last changes
media: v4l2-event.rst: adjust table to fit on PDF output
media: docs: don't show ToC for each part on PDF output
...
Create a new case to test the LRU lookup performance.
At the beginning, the LRU map is fully loaded (i.e. the number of keys
is equal to map->max_entries). The lookup is done through key 0
to num_map_entries and then repeats from 0 again.
This patch also creates an anonymous struct to properly
name the test params in stress_lru_hmap_alloc() in map_perf_test_kern.c.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Update cgrp2 bpf sock tests to check that device, mark and priority
can all be set on a socket via bpf programs attached to a cgroup.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add option to dump socket settings. Will be used in the next patch
to verify bpf programs are correctly setting mark, priority and
device based on the cgroup attachment for the program run.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add option to detach programs from a cgroup.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Update sock test to set mark and priority on socket create.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This tool xdp_monitor demonstrate how to use the different xdp_redirect
tracepoints xdp_redirect{,_map}{,_err} from a BPF program.
The default mode is to only monitor the error counters, to avoid
affecting the per packet performance. Tracepoints comes with a base
overhead of 25 nanosec for an attached bpf_prog, and 48 nanosec for
using a full perf record (with non-matching filter). Thus, default
loading the --stats mode could affect the maximum performance.
This version of the tool is very simple and count all types of errors
as one. It will be natural to extend this later with the different
types of errors that can occur, which should help users quickly
identify common mistakes.
Because the TP_STRUCT was kept in sync all the tracepoints loads the
same BPF code. It would also be natural to extend the map version to
demonstrate how the map information could be used.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
For supporting XDP_REDIRECT, a device driver must (obviously)
implement the "TX" function ndo_xdp_xmit(). An additional requirement
is you cannot TX out a device, unless it also have a xdp bpf program
attached. This dependency is caused by the driver code need to setup
XDP resources before it can ndo_xdp_xmit.
Update bpf samples xdp_redirect and xdp_redirect_map to automatically
attach a dummy XDP program to the configured ifindex_out device. Use
the XDP flag XDP_FLAGS_UPDATE_IF_NOEXIST on the dummy load, to avoid
overriding an existing XDP prog on the device.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extend existing tests for vxlan, gre, geneve, ipip to
include ERSPAN tunnel.
Signed-off-by: William Tu <u9012063@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the initial sockmap API we provided strparser and verdict programs
using a single attach command by extending the attach API with a the
attach_bpf_fd2 field.
However, if we add other programs in the future we will be adding a
field for every new possible type, attach_bpf_fd(3,4,..). This
seems a bit clumsy for an API. So lets push the programs using two
new type fields.
BPF_SK_SKB_STREAM_PARSER
BPF_SK_SKB_STREAM_VERDICT
This has the advantage of having a readable name and can easily be
extended in the future.
Updates to samples and sockmap included here also generalize tests
slightly to support upcoming patch for multiple map support.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Fixes: 174a79ff95 ("bpf: sockmap with sk redirect support")
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
These vb2_ops structures are only stored in the ops field of a
vb2_queue structure, which is declared as const. Thus the vb2_ops
structures themselves can be const.
Done with the help of Coccinelle.
// <smpl>
@r disable optional_qualifier@
identifier i;
position p;
@@
static struct vb2_ops i@p = { ... };
@ok@
identifier r.i;
struct vb2_queue e;
position p;
@@
e.ops = &i@p;
@bad@
position p != {r.p,ok.p};
identifier r.i;
struct vb2_ops e;
@@
e@i@p
@depends on !bad disable optional_qualifier@
identifier r.i;
@@
static
+const
struct vb2_ops i = { ... };
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This patch makes the needed changes to allow each process of
the INNER_LRU_HASH_PREALLOC test to provide its numa node id
when creating the lru map.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This program binds a program to a cgroup and then matches hard
coded IP addresses and adds these to a sockmap.
This will receive messages from the backend and send them to
the client.
client:X <---> frontend:10000 client:X <---> backend:10001
To keep things simple this is only designed for 1:1 connections
using hard coded values. A more complete example would allow many
backends and clients.
To run,
# sockmap <cgroup2_dir>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Two minor conflicts in virtio_net driver (bug fix overlapping addition
of a helper) and MAINTAINERS (new driver edit overlapping revamp of
PHY entry).
Signed-off-by: David S. Miller <davem@davemloft.net>
test_tunnel_bpf.sh fails to remove the vxlan11 tunnel device, causing the
next geneve tunnelling test case fails. In addition, the geneve reserved bit
in tcbpf2_kern.c should be zero, according to the RFC.
Signed-off-by: William Tu <u9012063@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Tested-by: Andy Gospodarek <andy@greyhouse.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This implements a sample program for testing bpf_redirect. It reports
the number of packets redirected per second and as input takes the
ifindex of the device to run the xdp program on and the ifindex of the
interface to redirect packets to.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Tested-by: Andy Gospodarek <andy@greyhouse.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Merge yet more updates from Andrew Morton:
- various misc things
- kexec updates
- sysctl core updates
- scripts/gdb udpates
- checkpoint-restart updates
- ipc updates
- kernel/watchdog updates
- Kees's "rough equivalent to the glibc _FORTIFY_SOURCE=1 feature"
- "stackprotector: ascii armor the stack canary"
- more MM bits
- checkpatch updates
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (96 commits)
writeback: rework wb_[dec|inc]_stat family of functions
ARM: samsung: usb-ohci: move inline before return type
video: fbdev: omap: move inline before return type
video: fbdev: intelfb: move inline before return type
USB: serial: safe_serial: move __inline__ before return type
drivers: tty: serial: move inline before return type
drivers: s390: move static and inline before return type
x86/efi: move asmlinkage before return type
sh: move inline before return type
MIPS: SMP: move asmlinkage before return type
m68k: coldfire: move inline before return type
ia64: sn: pci: move inline before type
ia64: move inline before return type
FRV: tlbflush: move asmlinkage before return type
CRIS: gpio: move inline before return type
ARM: HP Jornada 7XX: move inline before return type
ARM: KVM: move asmlinkage before type
checkpatch: improve the STORAGE_CLASS test
mm, migration: do not trigger OOM killer when migrating memory
drm/i915: use __GFP_RETRY_MAYFAIL
...
This is a layering violation so we replace the uses with calls to
sg_page(). This is a prep patch for replacing page_link and this is one
of the very few uses outside of scatterlist.h.
Link: http://lkml.kernel.org/r/1495663199-22234-1-git-send-email-logang@deltatee.com
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Stephen Bates <sbates@raithlin.com>
Acked-by: Stefani Seibold <stefani@seibold.net>
Cc: Stefani Seibold <stefani@seibold.net>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
With latest net-next:
====
clang -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/6.3.1/include -I./arch/x86/include -I./arch/x86/include/generated/uapi -I./arch/x86/include/generated -I./include -I./arch/x86/include/uapi -I./include/uapi -I./include/generated/uapi -include ./include/linux/kconfig.h -Isamples/bpf \
-D__KERNEL__ -D__ASM_SYSREG_H -Wno-unused-value -Wno-pointer-sign \
-Wno-compare-distinct-pointer-types \
-Wno-gnu-variable-sized-type-not-at-end \
-Wno-address-of-packed-member -Wno-tautological-compare \
-Wno-unknown-warning-option \
-O2 -emit-llvm -c samples/bpf/tcp_synrto_kern.c -o -| llc -march=bpf -filetype=obj -o samples/bpf/tcp_synrto_kern.o
samples/bpf/tcp_synrto_kern.c:20:10: fatal error: 'bpf_endian.h' file not found
^~~~~~~~~~~~~~
1 error generated.
====
net has the same issue.
Add support for ntohl and htonl in tools/testing/selftests/bpf/bpf_endian.h.
Also move bpf_helpers.h from samples/bpf to selftests/bpf and change
compiler include logic so that programs in samples/bpf can access the headers
in selftests/bpf, but not the other way around.
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The function load_bpf_file ignores the return value of
load_and_attach(), so even if load_and_attach() returns an error,
load_bpf_file() will return 0.
Now, load_bpf_file() can call load_and_attach() multiple times and some
can succeed and some could fail. I think the correct behavor is to
return error on the first failed load_and_attach().
v2: Added missing SOB
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sample BPF program, tcp_clamp_kern.c, to demostrate the use
of setting the sndcwnd clamp. This program assumes that if the
first 5.5 bytes of the host's IPv6 addresses are the same, then
the hosts are in the same datacenter and sets sndcwnd clamp to
100 packets, SYN and SYN-ACK RTOs to 10ms and send/receive buffer
sizes to 150KB.
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sample BPF program that assumes hosts are far away (i.e. large RTTs)
and sets initial cwnd and initial receive window to 40 packets,
send and receive buffers to 1.5MB.
In practice there would be a test to insure the hosts are actually
far enough away.
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sample BPF program that sets congestion control to dctcp when both hosts
are within the same datacenter. In this example that is assumed to be
when they have the first 5.5 bytes of their IPv6 address are the same.
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch contains a BPF program to set initial receive window to
40 packets and send and receive buffers to 1.5MB. This would usually
be done after doing appropriate checks that indicate the hosts are
far enough away (i.e. large RTT).
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Added support for calling a subset of socket setsockopts from
BPF_PROG_TYPE_SOCK_OPS programs. The code was duplicated rather
than making the changes to call the socket setsockopt function because
the changes required would have been larger.
The ops supported are:
SO_RCVBUF
SO_SNDBUF
SO_MAX_PACING_RATE
SO_PRIORITY
SO_RCVLOWAT
SO_MARK
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The sample bpf program, tcp_rwnd_kern.c, sets the initial
advertized window to 40 packets in an environment where
distinct IPv6 prefixes indicate that both hosts are not
in the same data center.
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The sample BPF program, tcp_synrto_kern.c, sets the SYN and SYN-ACK
RTOs to 10ms when both hosts are within the same datacenter (i.e.
small RTTs) in an environment where common IPv6 prefixes indicate
both hosts are in the same data center.
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The program load_sock_ops can be used to load sock_ops bpf programs and
to attach it to an existing (v2) cgroup. It can also be used to detach
sock_ops programs.
Examples:
load_sock_ops [-l] <cg-path> <prog filename>
Load and attaches a sock_ops program at the specified cgroup.
If "-l" is used, the program will continue to run to output the
BPF log buffer.
If the specified filename does not end in ".o", it appends
"_kern.o" to the name.
load_sock_ops -r <cg-path>
Detaches the currently attached sock_ops program from the
specified cgroup.
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Created a new BPF program type, BPF_PROG_TYPE_SOCK_OPS, and a corresponding
struct that allows BPF programs of this type to access some of the
socket's fields (such as IP addresses, ports, etc.). It uses the
existing bpf cgroups infrastructure so the programs can be attached per
cgroup with full inheritance support. The program will be called at
appropriate times to set relevant connections parameters such as buffer
sizes, SYN and SYN-ACK RTOs, etc., based on connection information such
as IP addresses, port numbers, etc.
Alghough there are already 3 mechanisms to set parameters (sysctls,
route metrics and setsockopts), this new mechanism provides some
distinct advantages. Unlike sysctls, it can set parameters per
connection. In contrast to route metrics, it can also use port numbers
and information provided by a user level program. In addition, it could
set parameters probabilistically for evaluation purposes (i.e. do
something different on 10% of the flows and compare results with the
other 90% of the flows). Also, in cases where IPv6 addresses contain
geographic information, the rules to make changes based on the distance
(or RTT) between the hosts are much easier than route metric rules and
can be global. Finally, unlike setsockopt, it oes not require
application changes and it can be updated easily at any time.
Although the bpf cgroup framework already contains a sock related
program type (BPF_PROG_TYPE_CGROUP_SOCK), I created the new type
(BPF_PROG_TYPE_SOCK_OPS) beccause the existing type expects to be called
only once during the connections's lifetime. In contrast, the new
program type will be called multiple times from different places in the
network stack code. For example, before sending SYN and SYN-ACKs to set
an appropriate timeout, when the connection is established to set
congestion control, etc. As a result it has "op" field to specify the
type of operation requested.
The purpose of this new program type is to simplify setting connection
parameters, such as buffer sizes, TCP's SYN RTO, etc. For example, it is
easy to use facebook's internal IPv6 addresses to determine if both hosts
of a connection are in the same datacenter. Therefore, it is easy to
write a BPF program to choose a small SYN RTO value when both hosts are
in the same datacenter.
This patch only contains the framework to support the new BPF program
type, following patches add the functionality to set various connection
parameters.
This patch defines a new BPF program type: BPF_PROG_TYPE_SOCKET_OPS
and a new bpf syscall command to load a new program of this type:
BPF_PROG_LOAD_SOCKET_OPS.
Two new corresponding structs (one for the kernel one for the user/BPF
program):
/* kernel version */
struct bpf_sock_ops_kern {
struct sock *sk;
__u32 op;
union {
__u32 reply;
__u32 replylong[4];
};
};
/* user version
* Some fields are in network byte order reflecting the sock struct
* Use the bpf_ntohl helper macro in samples/bpf/bpf_endian.h to
* convert them to host byte order.
*/
struct bpf_sock_ops {
__u32 op;
union {
__u32 reply;
__u32 replylong[4];
};
__u32 family;
__u32 remote_ip4; /* In network byte order */
__u32 local_ip4; /* In network byte order */
__u32 remote_ip6[4]; /* In network byte order */
__u32 local_ip6[4]; /* In network byte order */
__u32 remote_port; /* In network byte order */
__u32 local_port; /* In host byte horder */
};
Currently there are two types of ops. The first type expects the BPF
program to return a value which is then used by the caller (or a
negative value to indicate the operation is not supported). The second
type expects state changes to be done by the BPF program, for example
through a setsockopt BPF helper function, and they ignore the return
value.
The reply fields of the bpf_sockt_ops struct are there in case a bpf
program needs to return a value larger than an integer.
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Checks are added to the existing sockex3 and test_map_in_map test.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
tracex5_kern.c build failed with the following error message:
../samples/bpf/tracex5_kern.c:12:10: fatal error: 'syscall_nrs.h' file not found
#include "syscall_nrs.h"
The generated file syscall_nrs.h is put in build/samples/bpf directory,
but this directory is not in include path, hence build failed.
The fix is to add $(obj) into the clang compilation path.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use "-f <num>", to specify the index of the first
sender thread.
In default first thread is #0.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use -n <num>, to specify the number of packets every
thread sends.
Zero means indefinitely.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are two problems:
1) In MIPS the __NR_* macros expand to an expression, this causes the
sections of the object file to be named like:
.
.
.
[ 5] kprobe/(5000 + 1) PROGBITS 0000000000000000 000160 ...
[ 6] kprobe/(5000 + 0) PROGBITS 0000000000000000 000258 ...
[ 7] kprobe/(5000 + 9) PROGBITS 0000000000000000 000348 ...
.
.
.
The fix here is to use the "asm_offsets" trick to evaluate the macros
in the C compiler and generate a header file with a usable form of the
macros.
2) MIPS syscall numbers start at 5000, so we need a bigger map to hold
the sub-programs.
Signed-off-by: David Daney <david.daney@cavium.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: David Daney <david.daney@cavium.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
$ trace_event
tests attaching BPF program to HW_CPU_CYCLES, SW_CPU_CLOCK, HW_CACHE_L1D and other events.
It runs 'dd' in the background while bpf program collects user and kernel
stack trace on counter overflow.
User space expects to see sys_read and sys_write in the kernel stack.
$ tracex6
tests reading of various perf counters from BPF program.
Both tests were refactored to increase coverage and be more accurate.
Signed-off-by: Teng Qin <qinteng@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
An eBPF ELF file generated with LLVM can contain several program
section, which can be used for bpf tail calls. The bpf prog file
descriptors are accessible via array prog_fd[].
At-least XDP samples assume ordering, and uses prog_fd[0] is the main
XDP program to attach. The actual order of array prog_fd[] depend on
whether or not a bpf program section is referencing any maps or not.
Not using a map result in being loaded/processed after all other
prog section. Thus, this can lead to some very strange and hard to
debug situation, as the user can only see a FD and cannot correlated
that with the ELF section name.
The fix is rather simple, and even removes duplicate memcmp code.
Simply load program sections as the last step, instead of
load_and_attach while processing the relocation section.
When working with tail calls, it become even more essential that the
order of prog_fd[] is consistant, like the current dependency of the
map_fd[] order.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Shahid Habib noticed that when xdp1 was killed from a different console the xdp
program was not cleaned-up properly in the kernel and it continued to forward
traffic.
Most of the applications in samples/bpf cleanup properly, but only when getting
SIGINT. Since kill defaults to using SIGTERM, add support to cleanup when the
application receives either SIGINT or SIGTERM.
Signed-off-by: Andy Gospodarek <andy@greyhouse.net>
Reported-by: Shahid Habib <shahid.habib@broadcom.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
After commit b5cdae3291 ("net: Generic XDP") we automatically fall
back to a generic XDP variant if the driver does not support native
XDP. Allow for an option where the user can specify that always the
native XDP variant should be selected and in case it's not supported
by a driver, just bail out.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Here is the big set of new char/misc driver drivers and features for
4.12-rc1.
There's lots of new drivers added this time around, new firmware drivers
from Google, more auxdisplay drivers, extcon drivers, fpga drivers, and
a bunch of other driver updates. Nothing major, except if you happen to
have the hardware for these drivers, and then you will be happy :)
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWQvAgg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yknsACgzkAeyz16Z97J3UTaeejbR7nKUCAAoKY4WEHY
8O9f9pr9gj8GMBwxeZQa
=OIfB
-----END PGP SIGNATURE-----
Merge tag 'char-misc-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big set of new char/misc driver drivers and features for
4.12-rc1.
There's lots of new drivers added this time around, new firmware
drivers from Google, more auxdisplay drivers, extcon drivers, fpga
drivers, and a bunch of other driver updates. Nothing major, except if
you happen to have the hardware for these drivers, and then you will
be happy :)
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (136 commits)
firmware: google memconsole: Fix return value check in platform_memconsole_init()
firmware: Google VPD: Fix return value check in vpd_platform_init()
goldfish_pipe: fix build warning about using too much stack.
goldfish_pipe: An implementation of more parallel pipe
fpga fr br: update supported version numbers
fpga: region: release FPGA region reference in error path
fpga altera-hps2fpga: disable/unprepare clock on error in alt_fpga_bridge_probe()
mei: drop the TODO from samples
firmware: Google VPD sysfs driver
firmware: Google VPD: import lib_vpd source files
misc: lkdtm: Add volatile to intentional NULL pointer reference
eeprom: idt_89hpesx: Add OF device ID table
misc: ds1682: Add OF device ID table
misc: tsl2550: Add OF device ID table
w1: Remove unneeded use of assert() and remove w1_log.h
w1: Use kernel common min() implementation
uio_mf624: Align memory regions to page size and set correct offsets
uio_mf624: Refactor memory info initialization
uio: Allow handling of non page-aligned memory regions
hangcheck-timer: Fix typo in comment
...
Giving *_user.c side tools access to map_data[] provides easier
access to information on the maps being loaded. Still provide
the guarantee that the order maps are being defined in inside the
_kern.c file corresponds with the order in the array. Now user
tools are not blind, but can inspect and verify the maps that got
loaded from the ELF binary.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Do this change before others start to use this callback.
Change map_perf_test_user.c which seems to be the only user.
This patch extends capabilities of commit 9fd63d05f3 ("bpf:
Allow bpf sample programs (*_user.c) to change bpf_map_def").
Give fixup callback access to struct bpf_map_data, instead of
only stuct bpf_map_def. This add flexibility to allow userspace
to reassign the map file descriptor. This is very useful when
wanting to share maps between several bpf programs.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch does proper parsing of the ELF "maps" section, in-order to
be both backwards and forwards compatible with changes to the map
definition struct bpf_map_def, which gets compiled into the ELF file.
The assumption is that new features with value zero, means that they
are not in-use. For backward compatibility where loading an ELF file
with a smaller struct bpf_map_def, only copy objects ELF size, leaving
rest of loaders struct zero. For forward compatibility where ELF file
have a larger struct bpf_map_def, only copy loaders own struct size
and verify that rest of the larger struct is zero, assuming this means
the newer feature was not activated, thus it should be safe for this
older loader to load this newer ELF file.
Fixes: fb30d4b712 ("bpf: Add tests for map-in-map")
Fixes: 409526bea3c3 ("samples/bpf: bpf_load.c detect and abort if ELF maps section size is wrong")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Needed to adjust max locked memory RLIMIT_MEMLOCK for testing these bpf samples
as these are using more and larger maps than can fit in distro default 64Kbytes limit.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull livepatch updates from Jiri Kosina:
- a per-task consistency model is being added for architectures that
support reliable stack dumping (extending this, currently rather
trivial set, is currently in the works).
This extends the nature of the types of patches that can be applied
by live patching infrastructure. The code stems from the design
proposal made [1] back in November 2014. It's a hybrid of SUSE's
kGraft and RH's kpatch, combining advantages of both: it uses
kGraft's per-task consistency and syscall barrier switching combined
with kpatch's stack trace switching. There are also a number of
fallback options which make it quite flexible.
Most of the heavy lifting done by Josh Poimboeuf with help from
Miroslav Benes and Petr Mladek
[1] https://lkml.kernel.org/r/20141107140458.GA21774@suse.cz
- module load time patch optimization from Zhou Chengming
- a few assorted small fixes
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching:
livepatch: add missing printk newlines
livepatch: Cancel transition a safe way for immediate patches
livepatch: Reduce the time of finding module symbols
livepatch: make klp_mutex proper part of API
livepatch: allow removal of a disabled patch
livepatch: add /proc/<pid>/patch_state
livepatch: change to a per-task consistency model
livepatch: store function sizes
livepatch: use kstrtobool() in enabled_store()
livepatch: move patching functions into patch.c
livepatch: remove unnecessary object loaded check
livepatch: separate enabled and patched states
livepatch/s390: add TIF_PATCH_PENDING thread flag
livepatch/s390: reorganize TIF thread flag bits
livepatch/powerpc: add TIF_PATCH_PENDING thread flag
livepatch/x86: add TIF_PATCH_PENDING thread flag
livepatch: create temporary klp_update_patch_state() stub
x86/entry: define _TIF_ALLWORK_MASK flags explicitly
stacktrace/x86: add function for detecting reliable stack traces
Fix the following warnings triggered by 51570a5ab2 ("A Sample of
using socket cookie and uid for traffic monitoring"):
In file included from /home/foo/net-next/samples/bpf/cookie_uid_helper_example.c:54:0:
/home/foo/net-next/samples/bpf/cookie_uid_helper_example.c: In function 'prog_load':
/home/foo/net-next/samples/bpf/cookie_uid_helper_example.c:119:27: warning: overflow in implicit constant conversion [-Woverflow]
-32 + offsetof(struct stats, uid)),
^
/home/foo/net-next/samples/bpf/libbpf.h:135:12: note: in definition of macro 'BPF_STX_MEM'
.off = OFF, \
^
/home/foo/net-next/samples/bpf/cookie_uid_helper_example.c:121:27: warning: overflow in implicit constant conversion [-Woverflow]
-32 + offsetof(struct stats, packets), 1),
^
/home/foo/net-next/samples/bpf/libbpf.h:155:12: note: in definition of macro 'BPF_ST_MEM'
.off = OFF, \
^
/home/foo/net-next/samples/bpf/cookie_uid_helper_example.c:129:27: warning: overflow in implicit constant conversion [-Woverflow]
-32 + offsetof(struct stats, bytes)),
^
/home/foo/net-next/samples/bpf/libbpf.h:135:12: note: in definition of macro 'BPF_STX_MEM'
.off = OFF, \
^
HOSTLD /home/foo/net-next/samples/bpf/per_socket_stats_example
Fixes: 51570a5ab2 ("A Sample of using socket cookie and uid for traffic monitoring")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The xdp_tx_iptunnel program can be terminated in two ways, after
N-seconds or via Ctrl-C SIGINT. The SIGINT code path does not
handle detatching the correct XDP program, in-case the program
was attached with XDP_FLAGS_SKB_MODE.
Fix this by storing the XDP flags as a global variable, which is
available for the SIGINT handler function.
Fixes: 3993f2cb98 ("samples/bpf: Add support for SKB_MODE to xdp1 and xdp_tx_iptunnel")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The kernel side of XDP_FLAGS_SKB_MODE is unsigned, and the rtnetlink
IFLA_XDP_FLAGS is defined as NLA_U32. Thus, userspace programs under
samples/bpf/ should use the correct type.
Fixes: 3993f2cb98 ("samples/bpf: Add support for SKB_MODE to xdp1 and xdp_tx_iptunnel")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The struct bpf_map_def was extended in commit fb30d4b712 ("bpf: Add tests
for map-in-map") with member unsigned int inner_map_idx. This changed the size
of the maps section in the generated ELF _kern.o files.
Unfortunately the loader in bpf_load.c does not detect or handle this. Thus,
older _kern.o files became incompatible, and caused hard-to-debug errors
where the syscall validation rejected BPF_MAP_CREATE request.
This patch only detect the situation and aborts load_bpf_file(). It also
add code comments warning people that read this loader for inspiration
for these pitfalls.
Fixes: fb30d4b712 ("bpf: Add tests for map-in-map")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add option to xdp1 and xdp_tx_iptunnel to insert xdp program in
SKB_MODE:
- update set_link_xdp_fd to take a flags argument that is added to the
RTM_SETLINK message
- Add -S option to xdp1 and xdp_tx_iptunnel user code. When passed in
XDP_FLAGS_SKB_MODE is set in the flags arg passed to set_link_xdp_fd
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The TODO file is not relevant anymore and it's just a leftover from
the time the driver was in the staging tree.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes the following warning
samples/bpf/test_lru_dist.c:28:0: warning: "offsetof" redefined
#define offsetof(TYPE, MEMBER) ((size_t)&((TYPE *)0)->MEMBER)
In file included from ./tools/lib/bpf/bpf.h:25:0,
from samples/bpf/libbpf.h:5,
from samples/bpf/test_lru_dist.c:24:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stddef.h:417:0: note: this is the location of the previous definition
#define offsetof(TYPE, MEMBER) __builtin_offsetof (TYPE, MEMBER)
Signed-off-by: Alexander Alemayhu <alexander@alemayhu.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes the following warning
samples/bpf/cookie_uid_helper_example.c: At top level:
samples/bpf/cookie_uid_helper_example.c:276:6: warning: no previous prototype for ‘finish’ [-Wmissing-prototypes]
void finish(int ret)
^~~~~~
HOSTLD samples/bpf/per_socket_stats_example
Signed-off-by: Alexander Alemayhu <alexander@alemayhu.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
I was initially going to remove '-Wno-address-of-packed-member' because I
thought it was not supposed to be there but Daniel suggested using
'-Wno-unknown-warning-option'.
This silences several warnings similiar to the one below
warning: unknown warning option '-Wno-address-of-packed-member' [-Wunknown-warning-option]
1 warning generated.
clang -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/6.3.1/include -I./arch/x86/include -I./arch/x86/include/generated/uapi -I./arch/x86/include/generated -I./include
-I./arch/x86/include/uapi -I./include/uapi -I./include/generated/uapi -include ./include/linux/kconfig.h \
-D__KERNEL__ -D__ASM_SYSREG_H -Wno-unused-value -Wno-pointer-sign \
-Wno-compare-distinct-pointer-types \
-Wno-gnu-variable-sized-type-not-at-end \
-Wno-address-of-packed-member -Wno-tautological-compare \
-O2 -emit-llvm -c samples/bpf/xdp_tx_iptunnel_kern.c -o -| llc -march=bpf -filetype=obj -o samples/bpf/xdp_tx_iptunnel_kern.o
$ clang --version
clang version 3.9.1 (tags/RELEASE_391/final)
Target: x86_64-unknown-linux-gnu
Thread model: posix
InstalledDir: /usr/bin
Signed-off-by: Alexander Alemayhu <alexander@alemayhu.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds a map-in-map LRU example.
If we know only a subset of cores will use the
LRU, we can allocate a common LRU list per targeting core
and store it into an array-of-hashs.
It allows using the common LRU map with map-update performance
comparable to the BPF_F_NO_COMMON_LRU map but without wasting memory
on the unused cores that we know they will never access the LRU map.
BPF_F_NO_COMMON_LRU:
> map_perf_test 32 8 10000000 10000000 | awk '{sum += $3}END{print sum}'
9234314 (9.23M/s)
map-in-map LRU:
> map_perf_test 512 8 1260000 80000000 | awk '{sum += $3}END{print sum}'
9962743 (9.96M/s)
Notes that the max_entries for the map-in-map LRU test is 1260000 which
is the max_entries for each inner LRU map. 8 processes have been
started, so 8 * 1260000 = 10080000 (~10M) which is close to what is
used in the BPF_F_NO_COMMON_LRU test.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current bpf_map_def is statically defined during compile
time. This patch allows the *_user.c program to change it during
runtime. It is done by adding load_bpf_file_fixup_map() which
takes a callback. The callback will be called before creating
each map so that it has a chance to modify the bpf_map_def.
The current usecase is to change max_entries in map_perf_test.
It is interesting to test with a much bigger map size in
some cases (e.g. the following patch on bpf_lru_map.c).
However, it is hard to find one size to fit all testing
environment. Hence, it is handy to take the max_entries
as a cmdline arg and then configure the bpf_map_def during
runtime.
This patch adds two cmdline args. One is to configure
the map's max_entries. Another is to configure the max_cnt
which controls how many times a syscall is called.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
One more LRU test will be added later in this patch series.
In this patch, we first move all existing LRU map tests into
a single syscall (connect) first so that the future new
LRU test can be added without hunting another syscall.
One of the map name is also changed from percpu_lru_hash_map
to nocommon_lru_hash_map to avoid the confusion with percpu_hash_map.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Conflicts were simply overlapping changes. In the net/ipv4/route.c
case the code had simply moved around a little bit and the same fix
was made in both 'net' and 'net-next'.
In the net/sched/sch_generic.c case a fix in 'net' happened at
the same time that a new argument was added to qdisc_hash_add().
Signed-off-by: David S. Miller <davem@davemloft.net>
Added a per socket traffic monitoring option to illustrate the usage
of new getsockopt SO_COOKIE. The program is based on the socket traffic
monitoring program using xt_eBPF and in the new option the data entry
can be directly accessed using socket cookie. The cookie retrieved
allow us to lookup an element in the eBPF for a specific socket.
Signed-off-by: Chenbo Feng <fengc@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Include a mask in struct stat to indicate which bits of stx_attributes the
filesystem actually supports.
This would also be useful if we add another system call that allows you to
do a 'bulk attribute set' and pass in a statx struct with the masks
appropriately set to say what you want to set.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Add a sample program to demostrate the possible usage of
get_socket_cookie and get_socket_uid helper function. The program will
store bytes and packets counting of in/out traffic monitored by iptables
and store the stats in a bpf map in per socket base. The owner uid of
the socket will be stored as part of the data entry. A shell script for
running the program is also included.
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Chenbo Feng <fengc@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test cases for array of maps and hash of maps.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
$ map_perf_test 128
speed of HASH bpf_map_lookup_elem() in lookups per second
w/o JIT w/JIT
before 46M 58M
after 42M 74M
perf report
before:
54.23% map_perf_test [kernel.kallsyms] [k] __htab_map_lookup_elem
14.24% map_perf_test [kernel.kallsyms] [k] lookup_elem_raw
8.84% map_perf_test [kernel.kallsyms] [k] htab_map_lookup_elem
5.93% map_perf_test [kernel.kallsyms] [k] bpf_map_lookup_elem
2.30% map_perf_test [kernel.kallsyms] [k] bpf_prog_da4fc6a3f41761a2
1.49% map_perf_test [kernel.kallsyms] [k] kprobe_ftrace_handler
after:
60.03% map_perf_test [kernel.kallsyms] [k] __htab_map_lookup_elem
18.07% map_perf_test [kernel.kallsyms] [k] lookup_elem_raw
2.91% map_perf_test [kernel.kallsyms] [k] bpf_prog_da4fc6a3f41761a2
1.94% map_perf_test [kernel.kallsyms] [k] _einittext
1.90% map_perf_test [kernel.kallsyms] [k] __audit_syscall_exit
1.72% map_perf_test [kernel.kallsyms] [k] kprobe_ftrace_handler
Notice that bpf_map_lookup_elem() and htab_map_lookup_elem() are trivial
functions, yet they take sizeable amount of cpu time.
htab_map_gen_lookup() removes bpf_map_lookup_elem() and converts
htab_map_lookup_elem() into three BPF insns which causing cpu time
for bpf_prog_da4fc6a3f41761a2() slightly increase.
$ map_perf_test 256
speed of ARRAY bpf_map_lookup_elem() in lookups per second
w/o JIT w/JIT
before 97M 174M
after 64M 280M
before:
37.33% map_perf_test [kernel.kallsyms] [k] array_map_lookup_elem
13.95% map_perf_test [kernel.kallsyms] [k] bpf_map_lookup_elem
6.54% map_perf_test [kernel.kallsyms] [k] bpf_prog_da4fc6a3f41761a2
4.57% map_perf_test [kernel.kallsyms] [k] kprobe_ftrace_handler
after:
32.86% map_perf_test [kernel.kallsyms] [k] bpf_prog_da4fc6a3f41761a2
6.54% map_perf_test [kernel.kallsyms] [k] kprobe_ftrace_handler
array_map_gen_lookup() removes calls to array_map_lookup_elem()
and bpf_map_lookup_elem() and replaces them with 7 bpf insns.
The performance without JIT is slower, since executing extra insns
in the interpreter is slower than running native C code,
but with JIT the performance gains are obvious,
since native C->x86 code is replaced with fewer bpf->x86 instructions.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently we do not allow patch module to unload since there is no
method to determine if a task is still running in the patched code.
The consistency model gives us the way because when the unpatching
finishes we know that all tasks were marked as safe to call an original
function. Thus every new call to the function calls the original code
and at the same time no task can be somewhere in the patched code,
because it had to leave that code to be marked as safe.
We can safely let the patch module go after that.
Completion is used for synchronization between module removal and sysfs
infrastructure in a similar way to commit 942e443127 ("module: Fix
mod->mkobj.kobj potentially freed too early").
Note that we still do not allow the removal for immediate model, that is
no consistency model. The module refcount may increase in this case if
somebody disables and enables the patch several times. This should not
cause any harm.
With this change a call to try_module_get() is moved to
__klp_enable_patch from klp_register_patch to make module reference
counting symmetric (module_put() is in a patch disable path) and to
allow to take a new reference to a disabled module when being enabled.
Finally, we need to be very careful about possible races between
klp_unregister_patch(), kobject_put() functions and operations
on the related sysfs files.
kobject_put(&patch->kobj) must be called without klp_mutex. Otherwise,
it might be blocked by enabled_store() that needs the mutex as well.
In addition, enabled_store() must check if the patch was not
unregisted in the meantime.
There is no need to do the same for other kobject_put() callsites
at the moment. Their sysfs operations neither take the lock nor
they access any data that might be freed in the meantime.
There was an attempt to use kobjects the right way and prevent these
races by design. But it made the patch definition more complicated
and opened another can of worms. See
https://lkml.kernel.org/r/1464018848-4303-1-git-send-email-pmladek@suse.com
[Thanks to Petr Mladek for improving the commit message.]
Signed-off-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Change livepatch to use a basic per-task consistency model. This is the
foundation which will eventually enable us to patch those ~10% of
security patches which change function or data semantics. This is the
biggest remaining piece needed to make livepatch more generally useful.
This code stems from the design proposal made by Vojtech [1] in November
2014. It's a hybrid of kGraft and kpatch: it uses kGraft's per-task
consistency and syscall barrier switching combined with kpatch's stack
trace switching. There are also a number of fallback options which make
it quite flexible.
Patches are applied on a per-task basis, when the task is deemed safe to
switch over. When a patch is enabled, livepatch enters into a
transition state where tasks are converging to the patched state.
Usually this transition state can complete in a few seconds. The same
sequence occurs when a patch is disabled, except the tasks converge from
the patched state to the unpatched state.
An interrupt handler inherits the patched state of the task it
interrupts. The same is true for forked tasks: the child inherits the
patched state of the parent.
Livepatch uses several complementary approaches to determine when it's
safe to patch tasks:
1. The first and most effective approach is stack checking of sleeping
tasks. If no affected functions are on the stack of a given task,
the task is patched. In most cases this will patch most or all of
the tasks on the first try. Otherwise it'll keep trying
periodically. This option is only available if the architecture has
reliable stacks (HAVE_RELIABLE_STACKTRACE).
2. The second approach, if needed, is kernel exit switching. A
task is switched when it returns to user space from a system call, a
user space IRQ, or a signal. It's useful in the following cases:
a) Patching I/O-bound user tasks which are sleeping on an affected
function. In this case you have to send SIGSTOP and SIGCONT to
force it to exit the kernel and be patched.
b) Patching CPU-bound user tasks. If the task is highly CPU-bound
then it will get patched the next time it gets interrupted by an
IRQ.
c) In the future it could be useful for applying patches for
architectures which don't yet have HAVE_RELIABLE_STACKTRACE. In
this case you would have to signal most of the tasks on the
system. However this isn't supported yet because there's
currently no way to patch kthreads without
HAVE_RELIABLE_STACKTRACE.
3. For idle "swapper" tasks, since they don't ever exit the kernel, they
instead have a klp_update_patch_state() call in the idle loop which
allows them to be patched before the CPU enters the idle state.
(Note there's not yet such an approach for kthreads.)
All the above approaches may be skipped by setting the 'immediate' flag
in the 'klp_patch' struct, which will disable per-task consistency and
patch all tasks immediately. This can be useful if the patch doesn't
change any function or data semantics. Note that, even with this flag
set, it's possible that some tasks may still be running with an old
version of the function, until that function returns.
There's also an 'immediate' flag in the 'klp_func' struct which allows
you to specify that certain functions in the patch can be applied
without per-task consistency. This might be useful if you want to patch
a common function like schedule(), and the function change doesn't need
consistency but the rest of the patch does.
For architectures which don't have HAVE_RELIABLE_STACKTRACE, the user
must set patch->immediate which causes all tasks to be patched
immediately. This option should be used with care, only when the patch
doesn't change any function or data semantics.
In the future, architectures which don't have HAVE_RELIABLE_STACKTRACE
may be allowed to use per-task consistency if we can come up with
another way to patch kthreads.
The /sys/kernel/livepatch/<patch>/transition file shows whether a patch
is in transition. Only a single patch (the topmost patch on the stack)
can be in transition at a given time. A patch can remain in transition
indefinitely, if any of the tasks are stuck in the initial patch state.
A transition can be reversed and effectively canceled by writing the
opposite value to the /sys/kernel/livepatch/<patch>/enabled file while
the transition is in progress. Then all the tasks will attempt to
converge back to the original patch state.
[1] https://lkml.kernel.org/r/20141107140458.GA21774@suse.cz
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Ingo Molnar <mingo@kernel.org> # for the scheduler changes
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Pull vfs 'statx()' update from Al Viro.
This adds the new extended stat() interface that internally subsumes our
previous stat interfaces, and allows user mode to specify in more detail
what kind of information it wants.
It also allows for some explicit synchronization information to be
passed to the filesystem, which can be relevant for network filesystems:
is the cached value ok, or do you need open/close consistency, or what?
From David Howells.
Andreas Dilger points out that the first version of the extended statx
interface was posted June 29, 2010:
https://www.spinics.net/lists/linux-fsdevel/msg33831.html
* 'rebased-statx' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
statx: Add a system call to make enhanced file info available
Add a system call to make extended file information available, including
file creation and some attribute flags where available through the
underlying filesystem.
The getattr inode operation is altered to take two additional arguments: a
u32 request_mask and an unsigned int flags that indicate the
synchronisation mode. This change is propagated to the vfs_getattr*()
function.
Functions like vfs_stat() are now inline wrappers around new functions
vfs_statx() and vfs_statx_fd() to reduce stack usage.
========
OVERVIEW
========
The idea was initially proposed as a set of xattrs that could be retrieved
with getxattr(), but the general preference proved to be for a new syscall
with an extended stat structure.
A number of requests were gathered for features to be included. The
following have been included:
(1) Make the fields a consistent size on all arches and make them large.
(2) Spare space, request flags and information flags are provided for
future expansion.
(3) Better support for the y2038 problem [Arnd Bergmann] (tv_sec is an
__s64).
(4) Creation time: The SMB protocol carries the creation time, which could
be exported by Samba, which will in turn help CIFS make use of
FS-Cache as that can be used for coherency data (stx_btime).
This is also specified in NFSv4 as a recommended attribute and could
be exported by NFSD [Steve French].
(5) Lightweight stat: Ask for just those details of interest, and allow a
netfs (such as NFS) to approximate anything not of interest, possibly
without going to the server [Trond Myklebust, Ulrich Drepper, Andreas
Dilger] (AT_STATX_DONT_SYNC).
(6) Heavyweight stat: Force a netfs to go to the server, even if it thinks
its cached attributes are up to date [Trond Myklebust]
(AT_STATX_FORCE_SYNC).
And the following have been left out for future extension:
(7) Data version number: Could be used by userspace NFS servers [Aneesh
Kumar].
Can also be used to modify fill_post_wcc() in NFSD which retrieves
i_version directly, but has just called vfs_getattr(). It could get
it from the kstat struct if it used vfs_xgetattr() instead.
(There's disagreement on the exact semantics of a single field, since
not all filesystems do this the same way).
(8) BSD stat compatibility: Including more fields from the BSD stat such
as creation time (st_btime) and inode generation number (st_gen)
[Jeremy Allison, Bernd Schubert].
(9) Inode generation number: Useful for FUSE and userspace NFS servers
[Bernd Schubert].
(This was asked for but later deemed unnecessary with the
open-by-handle capability available and caused disagreement as to
whether it's a security hole or not).
(10) Extra coherency data may be useful in making backups [Andreas Dilger].
(No particular data were offered, but things like last backup
timestamp, the data version number and the DOS archive bit would come
into this category).
(11) Allow the filesystem to indicate what it can/cannot provide: A
filesystem can now say it doesn't support a standard stat feature if
that isn't available, so if, for instance, inode numbers or UIDs don't
exist or are fabricated locally...
(This requires a separate system call - I have an fsinfo() call idea
for this).
(12) Store a 16-byte volume ID in the superblock that can be returned in
struct xstat [Steve French].
(Deferred to fsinfo).
(13) Include granularity fields in the time data to indicate the
granularity of each of the times (NFSv4 time_delta) [Steve French].
(Deferred to fsinfo).
(14) FS_IOC_GETFLAGS value. These could be translated to BSD's st_flags.
Note that the Linux IOC flags are a mess and filesystems such as Ext4
define flags that aren't in linux/fs.h, so translation in the kernel
may be a necessity (or, possibly, we provide the filesystem type too).
(Some attributes are made available in stx_attributes, but the general
feeling was that the IOC flags were to ext[234]-specific and shouldn't
be exposed through statx this way).
(15) Mask of features available on file (eg: ACLs, seclabel) [Brad Boyer,
Michael Kerrisk].
(Deferred, probably to fsinfo. Finding out if there's an ACL or
seclabal might require extra filesystem operations).
(16) Femtosecond-resolution timestamps [Dave Chinner].
(A __reserved field has been left in the statx_timestamp struct for
this - if there proves to be a need).
(17) A set multiple attributes syscall to go with this.
===============
NEW SYSTEM CALL
===============
The new system call is:
int ret = statx(int dfd,
const char *filename,
unsigned int flags,
unsigned int mask,
struct statx *buffer);
The dfd, filename and flags parameters indicate the file to query, in a
similar way to fstatat(). There is no equivalent of lstat() as that can be
emulated with statx() by passing AT_SYMLINK_NOFOLLOW in flags. There is
also no equivalent of fstat() as that can be emulated by passing a NULL
filename to statx() with the fd of interest in dfd.
Whether or not statx() synchronises the attributes with the backing store
can be controlled by OR'ing a value into the flags argument (this typically
only affects network filesystems):
(1) AT_STATX_SYNC_AS_STAT tells statx() to behave as stat() does in this
respect.
(2) AT_STATX_FORCE_SYNC will require a network filesystem to synchronise
its attributes with the server - which might require data writeback to
occur to get the timestamps correct.
(3) AT_STATX_DONT_SYNC will suppress synchronisation with the server in a
network filesystem. The resulting values should be considered
approximate.
mask is a bitmask indicating the fields in struct statx that are of
interest to the caller. The user should set this to STATX_BASIC_STATS to
get the basic set returned by stat(). It should be noted that asking for
more information may entail extra I/O operations.
buffer points to the destination for the data. This must be 256 bytes in
size.
======================
MAIN ATTRIBUTES RECORD
======================
The following structures are defined in which to return the main attribute
set:
struct statx_timestamp {
__s64 tv_sec;
__s32 tv_nsec;
__s32 __reserved;
};
struct statx {
__u32 stx_mask;
__u32 stx_blksize;
__u64 stx_attributes;
__u32 stx_nlink;
__u32 stx_uid;
__u32 stx_gid;
__u16 stx_mode;
__u16 __spare0[1];
__u64 stx_ino;
__u64 stx_size;
__u64 stx_blocks;
__u64 __spare1[1];
struct statx_timestamp stx_atime;
struct statx_timestamp stx_btime;
struct statx_timestamp stx_ctime;
struct statx_timestamp stx_mtime;
__u32 stx_rdev_major;
__u32 stx_rdev_minor;
__u32 stx_dev_major;
__u32 stx_dev_minor;
__u64 __spare2[14];
};
The defined bits in request_mask and stx_mask are:
STATX_TYPE Want/got stx_mode & S_IFMT
STATX_MODE Want/got stx_mode & ~S_IFMT
STATX_NLINK Want/got stx_nlink
STATX_UID Want/got stx_uid
STATX_GID Want/got stx_gid
STATX_ATIME Want/got stx_atime{,_ns}
STATX_MTIME Want/got stx_mtime{,_ns}
STATX_CTIME Want/got stx_ctime{,_ns}
STATX_INO Want/got stx_ino
STATX_SIZE Want/got stx_size
STATX_BLOCKS Want/got stx_blocks
STATX_BASIC_STATS [The stuff in the normal stat struct]
STATX_BTIME Want/got stx_btime{,_ns}
STATX_ALL [All currently available stuff]
stx_btime is the file creation time, stx_mask is a bitmask indicating the
data provided and __spares*[] are where as-yet undefined fields can be
placed.
Time fields are structures with separate seconds and nanoseconds fields
plus a reserved field in case we want to add even finer resolution. Note
that times will be negative if before 1970; in such a case, the nanosecond
fields will also be negative if not zero.
The bits defined in the stx_attributes field convey information about a
file, how it is accessed, where it is and what it does. The following
attributes map to FS_*_FL flags and are the same numerical value:
STATX_ATTR_COMPRESSED File is compressed by the fs
STATX_ATTR_IMMUTABLE File is marked immutable
STATX_ATTR_APPEND File is append-only
STATX_ATTR_NODUMP File is not to be dumped
STATX_ATTR_ENCRYPTED File requires key to decrypt in fs
Within the kernel, the supported flags are listed by:
KSTAT_ATTR_FS_IOC_FLAGS
[Are any other IOC flags of sufficient general interest to be exposed
through this interface?]
New flags include:
STATX_ATTR_AUTOMOUNT Object is an automount trigger
These are for the use of GUI tools that might want to mark files specially,
depending on what they are.
Fields in struct statx come in a number of classes:
(0) stx_dev_*, stx_blksize.
These are local system information and are always available.
(1) stx_mode, stx_nlinks, stx_uid, stx_gid, stx_[amc]time, stx_ino,
stx_size, stx_blocks.
These will be returned whether the caller asks for them or not. The
corresponding bits in stx_mask will be set to indicate whether they
actually have valid values.
If the caller didn't ask for them, then they may be approximated. For
example, NFS won't waste any time updating them from the server,
unless as a byproduct of updating something requested.
If the values don't actually exist for the underlying object (such as
UID or GID on a DOS file), then the bit won't be set in the stx_mask,
even if the caller asked for the value. In such a case, the returned
value will be a fabrication.
Note that there are instances where the type might not be valid, for
instance Windows reparse points.
(2) stx_rdev_*.
This will be set only if stx_mode indicates we're looking at a
blockdev or a chardev, otherwise will be 0.
(3) stx_btime.
Similar to (1), except this will be set to 0 if it doesn't exist.
=======
TESTING
=======
The following test program can be used to test the statx system call:
samples/statx/test-statx.c
Just compile and run, passing it paths to the files you want to examine.
The file is built automatically if CONFIG_SAMPLES is enabled.
Here's some example output. Firstly, an NFS directory that crosses to
another FSID. Note that the AUTOMOUNT attribute is set because transiting
this directory will cause d_automount to be invoked by the VFS.
[root@andromeda ~]# /tmp/test-statx -A /warthog/data
statx(/warthog/data) = 0
results=7ff
Size: 4096 Blocks: 8 IO Block: 1048576 directory
Device: 00:26 Inode: 1703937 Links: 125
Access: (3777/drwxrwxrwx) Uid: 0 Gid: 4041
Access: 2016-11-24 09:02:12.219699527+0000
Modify: 2016-11-17 10:44:36.225653653+0000
Change: 2016-11-17 10:44:36.225653653+0000
Attributes: 0000000000001000 (-------- -------- -------- -------- -------- -------- ---m---- --------)
Secondly, the result of automounting on that directory.
[root@andromeda ~]# /tmp/test-statx /warthog/data
statx(/warthog/data) = 0
results=7ff
Size: 4096 Blocks: 8 IO Block: 1048576 directory
Device: 00:27 Inode: 2 Links: 125
Access: (3777/drwxrwxrwx) Uid: 0 Gid: 4041
Access: 2016-11-24 09:02:12.219699527+0000
Modify: 2016-11-17 10:44:36.225653653+0000
Change: 2016-11-17 10:44:36.225653653+0000
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
So the original intention of tsk_cpus_allowed() was to 'future-proof'
the field - but it's pretty ineffectual at that, because half of
the code uses ->cpus_allowed directly ...
Also, the wrapper makes the code longer than the original expression!
So just get rid of it. This also shrinks <linux/sched.h> a bit.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull networking updates from David Miller:
"Highlights:
1) Support TX_RING in AF_PACKET TPACKET_V3 mode, from Sowmini
Varadhan.
2) Simplify classifier state on sk_buff in order to shrink it a bit.
From Willem de Bruijn.
3) Introduce SIPHASH and it's usage for secure sequence numbers and
syncookies. From Jason A. Donenfeld.
4) Reduce CPU usage for ICMP replies we are going to limit or
suppress, from Jesper Dangaard Brouer.
5) Introduce Shared Memory Communications socket layer, from Ursula
Braun.
6) Add RACK loss detection and allow it to actually trigger fast
recovery instead of just assisting after other algorithms have
triggered it. From Yuchung Cheng.
7) Add xmit_more and BQL support to mvneta driver, from Simon Guinot.
8) skb_cow_data avoidance in esp4 and esp6, from Steffen Klassert.
9) Export MPLS packet stats via netlink, from Robert Shearman.
10) Significantly improve inet port bind conflict handling, especially
when an application is restarted and changes it's setting of
reuseport. From Josef Bacik.
11) Implement TX batching in vhost_net, from Jason Wang.
12) Extend the dummy device so that VF (virtual function) features,
such as configuration, can be more easily tested. From Phil
Sutter.
13) Avoid two atomic ops per page on x86 in bnx2x driver, from Eric
Dumazet.
14) Add new bpf MAP, implementing a longest prefix match trie. From
Daniel Mack.
15) Packet sample offloading support in mlxsw driver, from Yotam Gigi.
16) Add new aquantia driver, from David VomLehn.
17) Add bpf tracepoints, from Daniel Borkmann.
18) Add support for port mirroring to b53 and bcm_sf2 drivers, from
Florian Fainelli.
19) Remove custom busy polling in many drivers, it is done in the core
networking since 4.5 times. From Eric Dumazet.
20) Support XDP adjust_head in virtio_net, from John Fastabend.
21) Fix several major holes in neighbour entry confirmation, from
Julian Anastasov.
22) Add XDP support to bnxt_en driver, from Michael Chan.
23) VXLAN offloads for enic driver, from Govindarajulu Varadarajan.
24) Add IPVTAP driver (IP-VLAN based tap driver) from Sainath Grandhi.
25) Support GRO in IPSEC protocols, from Steffen Klassert"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1764 commits)
Revert "ath10k: Search SMBIOS for OEM board file extension"
net: socket: fix recvmmsg not returning error from sock_error
bnxt_en: use eth_hw_addr_random()
bpf: fix unlocking of jited image when module ronx not set
arch: add ARCH_HAS_SET_MEMORY config
net: napi_watchdog() can use napi_schedule_irqoff()
tcp: Revert "tcp: tcp_probe: use spin_lock_bh()"
net/hsr: use eth_hw_addr_random()
net: mvpp2: enable building on 64-bit platforms
net: mvpp2: switch to build_skb() in the RX path
net: mvpp2: simplify MVPP2_PRS_RI_* definitions
net: mvpp2: fix indentation of MVPP2_EXT_GLOBAL_CTRL_DEFAULT
net: mvpp2: remove unused register definitions
net: mvpp2: simplify mvpp2_bm_bufs_add()
net: mvpp2: drop useless fields in mvpp2_bm_pool and related code
net: mvpp2: remove unused 'tx_skb' field of 'struct mvpp2_tx_queue'
net: mvpp2: release reference to txq_cpu[] entry after unmapping
net: mvpp2: handle too large value in mvpp2_rx_time_coal_set()
net: mvpp2: handle too large value handling in mvpp2_rx_pkts_coal_set()
net: mvpp2: remove useless arguments in mvpp2_rx_{pkts, time}_coal_set
...
Pull security layer updates from James Morris:
"Highlights:
- major AppArmor update: policy namespaces & lots of fixes
- add /sys/kernel/security/lsm node for easy detection of loaded LSMs
- SELinux cgroupfs labeling support
- SELinux context mounts on tmpfs, ramfs, devpts within user
namespaces
- improved TPM 2.0 support"
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (117 commits)
tpm: declare tpm2_get_pcr_allocation() as static
tpm: Fix expected number of response bytes of TPM1.2 PCR Extend
tpm xen: drop unneeded chip variable
tpm: fix misspelled "facilitate" in module parameter description
tpm_tis: fix the error handling of init_tis()
KEYS: Use memzero_explicit() for secret data
KEYS: Fix an error code in request_master_key()
sign-file: fix build error in sign-file.c with libressl
selinux: allow changing labels for cgroupfs
selinux: fix off-by-one in setprocattr
tpm: silence an array overflow warning
tpm: fix the type of owned field in cap_t
tpm: add securityfs support for TPM 2.0 firmware event log
tpm: enhance read_log_of() to support Physical TPM event log
tpm: enhance TPM 2.0 PCR extend to support multiple banks
tpm: implement TPM 2.0 capability to get active PCR banks
tpm: fix RC value check in tpm2_seal_trusted
tpm_tis: fix iTPM probe via probe_itpm() function
tpm: Begin the process to deprecate user_read_timer
tpm: remove tpm_read_index and tpm_write_index from tpm.h
...
Pull perf updates from Ingo Molnar:
"On the kernel side the main changes in this cycle were:
- Add Intel Kaby Lake CPU support (Srinivas Pandruvada)
- AMD uncore driver updates for fam17 (Janakarajan Natarajan)
- Intel/PT updates and core events optimizations and cleanups
(Alexander Shishkin)
- cgroups events fixes (David Carrillo-Cisneros)
- kprobes improvements (Masami Hiramatsu)
- ... plus misc fixes and updates.
On the tooling side the main changes were:
- Support clang build in tools/{perf,lib/{bpf,traceevent,api}} with
CC=clang, to, for instance, take advantage of better warnings
(Arnaldo Carvalho de Melo):
- Introduce the 'delta-abs' 'perf diff' compute method, that orders
the histogram entries by the absolute value of the percentage delta
for a function in two perf.data files, i.e. the functions that
changed the most (increase or decrease in samples) comes first
(Namhyung Kim)
- Add support for parsing Intel uncore vendor event files and add
uncore vendor events for the Intel server processors (Haswell,
Broadwell, IvyBridge), Xeon Phi (Knights Landing) and Broadwell DE
(Andi Kleen)
- Introduce 'perf ftrace' a perf front end to the kernel's ftrace
function and function_graph tracer, defaulting to the
"function_graph" tracer, more work will be done in reviving this
effort, forward porting it from its initial patch submission
(Namhyung Kim)
- Add 'e' and 'c' hotkeys to expand/collapse call chains for a single
hist entry in the 'perf report' and 'perf top' TUI (Jiri Olsa)
- Account thread wait time (off CPU time) separately: sleep, iowait
and preempt, based on the prev_state of the last event, show the
breakdown when using "perf sched timehist --state" (Namhyumg Kim)
- Add more triggers to switch the output file (perf.data.TIMESTAMP).
Now, in addition to switching to a different output file when
receiving a SIGUSR2, one can also specify file size and time based
triggers:
perf record -a --switch-output=signal
is equivalent to what we had before:
perf record -a --switch-output
While we can also ask for the file to be "sliced" by size, taking
into account that that will happen only when we get woken up by the
kernel, i.e. one has to take into account the --mmap-pages (the
size of the perf mmap ring buffer):
perf record -a --switch-output=2G
will break the perf.data output into multiple files limited to 2GB
of samples, right when generating the output.
For time based samples, alert() will be used, so to have 1 minute
limited perf.data output files:
perf record -a --switch-output=1m
(Jiri Olsa)
- Improve 'perf trace' (Arnaldo Carvalho de Melo)
- 'perf kallsyms' toy tool to look for extended symbol information on
the running kernel and demonstrate the machine/thread/symbol APIs
for use in other tools, such as 'perf probe' (Arnaldo Carvalho de
Melo)
- ... plus tons of other changes, see the shortlog and Git log for
details"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (131 commits)
perf tools: Add missing parse_events_error() prototype
perf pmu: Fix check for unset alias->unit array
perf tools: Be consistent on the type of map->symbols[] interator
perf intel pt decoder: clang has no -Wno-override-init
perf evsel: Do not put a variable sized type not at the end of a struct
perf probe: Avoid accessing uninitialized 'map' variable
perf tools: Do not put a variable sized type not at the end of a struct
perf record: Do not put a variable sized type not at the end of a struct
perf tests: Synthesize struct instead of using field after variable sized type
perf bench numa: Make sure dprintf() is not defined
Revert "perf bench futex: Sanitize numeric parameters"
tools lib subcmd: Make it an error to pass a signed value to OPTION_UINTEGER
tools: Set the maximum optimization level according to the compiler being used
tools: Suppress request for warning options not existent in clang
samples/bpf: Reset global variables
samples/bpf: Ignore already processed ELF sections
samples/bpf: Add missing header
perf symbols: dso->name is an array, no need to check it against NULL
perf tests record: No need to test an array against NULL
perf symbols: No need to check if sym->name is NULL
...
Before loading a new ELF, clean previous kernel version, license and
processed sections.
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Acked-by: Joe Stringer <joe@ovn.org>
Acked-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David S. Miller <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Link: http://lkml.kernel.org/r/20170208202744.16274-3-mic@digikod.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a missing check for the map fixup loop.
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Acked-by: Joe Stringer <joe@ovn.org>
Acked-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David S. Miller <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Link: http://lkml.kernel.org/r/20170208202744.16274-2-mic@digikod.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Include unistd.h to define __NR_getuid and __NR_getsid.
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Acked-by: Joe Stringer <joe@ovn.org>
Acked-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David S. Miller <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Link: http://lkml.kernel.org/r/20170208202744.16274-4-mic@digikod.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If BPF_F_ALLOW_OVERRIDE flag is used in BPF_PROG_ATTACH command
to the given cgroup the descendent cgroup will be able to override
effective bpf program that was inherited from this cgroup.
By default it's not passed, therefore override is disallowed.
Examples:
1.
prog X attached to /A with default
prog Y fails to attach to /A/B and /A/B/C
Everything under /A runs prog X
2.
prog X attached to /A with allow_override.
prog Y fails to attach to /A/B with default (non-override)
prog M attached to /A/B with allow_override.
Everything under /A/B runs prog M only.
3.
prog X attached to /A with allow_override.
prog Y fails to attach to /A with default.
The user has to detach first to switch the mode.
In the future this behavior may be extended with a chain of
non-overridable programs.
Also fix the bug where detach from cgroup where nothing is attached
was not throwing error. Return ENOENT in such case.
Add several testcases and adjust libbpf.
Fixes: 3007098494 ("cgroup: add support for eBPF programs")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extend the map_perf_test_{user,kern}.c infrastructure to stress test
lpm-trie lookups. We hook into the kprobe on sys_gettid() and measure
the latency depending on trie size and lookup count.
On my Intel Haswell i7-6400U, a single gettid() syscall with an empty
bpf program takes roughly 6.5us on my system. Lookups in empty tries
take ~1.8us on first try, ~0.9us on retries. Lookups in tries with 8192
entries take ~7.1us (on the first _and_ any subsequent try).
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Daniel Mack <daniel@zonque.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix build errors for samples/bpf xdp_tx_iptunnel and tc_l2_redirect,
when dynamic debugging is enabled (CONFIG_DYNAMIC_DEBUG) by defining a
fake KBUILD_MODNAME.
Just like Daniel Borkmann fixed other samples/bpf in commit
96a8eb1eee ("bpf: fix samples to add fake KBUILD_MODNAME").
Fixes: 12d8bb64e3 ("bpf: xdp: Add XDP example for head adjustment")
Fixes: 90e02896f1 ("bpf: Add test for bpf_redirect to ipip/ip6tnl")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull perf fixes from Ingo Molnar:
"Misc race fixes uncovered by fuzzing efforts, a Sparse fix, two PMU
driver fixes, plus miscellanous tooling fixes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86: Reject non sampling events with precise_ip
perf/x86/intel: Account interrupts for PEBS errors
perf/core: Fix concurrent sys_perf_event_open() vs. 'move_group' race
perf/core: Fix sys_perf_event_open() vs. hotplug
perf/x86/intel: Use ULL constant to prevent undefined shift behaviour
perf/x86/intel/uncore: Fix hardcoded socket 0 assumption in the Haswell init code
perf/x86: Set pmu->module in Intel PMU modules
perf probe: Fix to probe on gcc generated symbols for offline kernel
perf probe: Fix --funcs to show correct symbols for offline module
perf symbols: Robustify reading of build-id from sysfs
perf tools: Install tools/lib/traceevent plugins with install-bin
tools lib traceevent: Fix prev/next_prio for deadline tasks
perf record: Fix --switch-output documentation and comment
perf record: Make __record_options static
tools lib subcmd: Add OPT_STRING_OPTARG_SET option
perf probe: Fix to get correct modname from elf header
samples/bpf trace_output_user: Remove duplicate sys/ioctl.h include
samples/bpf sock_example: Avoid getting ethhdr from two includes
perf sched timehist: Show total scheduling time
We set info.count to 1 in mtty_get_irq_info() so static checkers
complain that, "Why do we have impossible conditions?" The answer is
that it seems to be left over dead code that can be safely removed.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This is a sample driver for documentation so the impact is probably
pretty low. But we should check that bar_index is valid so we
don't write beyond the end of the mdev_state->region_info[] array.
Fixes: 9d1a546c53 ("docs: Sample driver to demonstrate how to use Mediated device framework.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The copy_to_user() function returns the number of bytes which it wasn't
able to copy but we want to return a negative error code.
Fixes: 9d1a546c53 ("docs: Sample driver to demonstrate how to use Mediated device framework.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
There were some bugs in the JNE64 and JLT64 comparision macros. This fixes
them, improves comments, and cleans up the file while we are at it.
Reported-by: Stephen Röttger <sroettger@google.com>
Signed-off-by: Mathias Svensson <idolf@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: stable@vger.kernel.org
Signed-off-by: James Morris <james.l.morris@oracle.com>
Fixes:
- Fix prev/next_prio formatting for deadline tasks in libtraceevent (Daniel Bristot de Oliveira)
- Robustify reading of build-ids from /sys/kernel/note (Arnaldo Carvalho de Melo)
- Fix building some sample/bpf in Alpine Linux 3.4 (Arnaldo Carvalho de Melo)
- Fix 'make install-bin' to install libtraceevent plugins (Arnaldo Carvalho de Melo)
- Fix 'perf record --switch-output' documentation and comment (Jiri Olsa)
- 'perf probe' fixes for cross arch probing (Masami Hiramatsu)
Improvement:
- Show total scheduling time in 'perf sched timehist' (Namhyumg Kim)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=o9KL
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-for-mingo-4.10-20170104' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes and one improvement from Arnaldo Carvalho de Melo:
Fixes:
- Fix prev/next_prio formatting for deadline tasks in libtraceevent (Daniel Bristot de Oliveira)
- Robustify reading of build-ids from /sys/kernel/note (Arnaldo Carvalho de Melo)
- Fix building some sample/bpf in Alpine Linux 3.4 (Arnaldo Carvalho de Melo)
- Fix 'make install-bin' to install libtraceevent plugins (Arnaldo Carvalho de Melo)
- Fix 'perf record --switch-output' documentation and comment (Jiri Olsa)
- Fix 'perf probe' for cross arch probing (Masami Hiramatsu)
Improvement:
- Show total scheduling time in 'perf sched timehist' (Namhyumg Kim)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is just sample code. We forget to set the error codes in a couple
places.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reported-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Abstract access to mdev_device so that we can define which interfaces
are public rather than relying on comments in the structure.
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Jike Song <jike.song@intel.com>
Reviewed by: Kirti Wankhede <kwankhede@nvidia.com>
Rather than hoping for good behavior by marking some elements
internal, enforce it by making the entire structure private and
creating an accessor function for the one useful external field.
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Cc: Jike Song <jike.song@intel.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed by: Kirti Wankhede <kwankhede@nvidia.com>
Add an mdev_ prefix so we're not poluting the namespace so much.
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Cc: Jike Song <jike.song@intel.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed by: Kirti Wankhede <kwankhede@nvidia.com>
This sample driver was originally under Documentation/ and was moved
to samples, but build support was never adjusted for the new location.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Joe Stringer <joe@ovn.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-3awp0nv8tpnblatojmwjww7z@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To avoid the following build failure on Alpine Linux 3.4, that has
clang-3.8 with the bpf target:
HOSTCC samples/bpf/sock_example.o
In file included from /usr/include/net/ethernet.h:10:0,
from /git/linux/samples/bpf/sock_example.h:7,
from /git/linux/samples/bpf/sock_example.c:30:
/usr/include/netinet/if_ether.h:96:8: error: redefinition of 'struct
ethhdr'
struct ethhdr {
^
In file included from /git/linux/samples/bpf/sock_example.c:26:0:
./usr/include/linux/if_ether.h:144:8: note: originally defined here
struct ethhdr {
^
scripts/Makefile.host:124: recipe for target
'samples/bpf/sock_example.o' failed
make[2]: *** [samples/bpf/sock_example.o] Error 1
/git/linux/Makefile:1658: recipe for target 'samples/bpf/' failed
So include net/if_ether.h for the needs of sock_example.h, using the
same include that sock_example.c uses.
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Joe Stringer <joe@ovn.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-m9avekl1b651qe1r1zd5tzz9@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull perf fixes from Ingo Molnar:
"On the kernel side there's two x86 PMU driver fixes and a uprobes fix,
plus on the tooling side there's a number of fixes and some late
updates"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
perf sched timehist: Fix invalid period calculation
perf sched timehist: Remove hardcoded 'comm_width' check at print_summary
perf sched timehist: Enlarge default 'comm_width'
perf sched timehist: Honour 'comm_width' when aligning the headers
perf/x86: Fix overlap counter scheduling bug
perf/x86/pebs: Fix handling of PEBS buffer overflows
samples/bpf: Move open_raw_sock to separate header
samples/bpf: Remove perf_event_open() declaration
samples/bpf: Be consistent with bpf_load_program bpf_insn parameter
tools lib bpf: Add bpf_prog_{attach,detach}
samples/bpf: Switch over to libbpf
perf diff: Do not overwrite valid build id
perf annotate: Don't throw error for zero length symbols
perf bench futex: Fix lock-pi help string
perf trace: Check if MAP_32BIT is defined (again)
samples/bpf: Make perf_event_read() static
uprobes: Fix uprobes on MIPS, allow for a cache flush after ixol breakpoint creation
samples/bpf: Make samples more libbpf-centric
tools lib bpf: Add flags to bpf_create_map()
tools lib bpf: use __u32 from linux/types.h
...
This function was declared in libbpf.c and was the only remaining
function in this library, but has nothing to do with BPF. Shift it out
into a new header, sock_example.h, and include it from the relevant
samples.
Signed-off-by: Joe Stringer <joe@ovn.org>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20161209024620.31660-8-joe@ovn.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This declaration was made in samples/bpf/libbpf.c for convenience, but
there's already one in tools/perf/perf-sys.h. Reuse that one.
Committer notes:
Testing it:
$ make -j4 O=../build/v4.9.0-rc8+ samples/bpf/
make[1]: Entering directory '/home/build/v4.9.0-rc8+'
CHK include/config/kernel.release
GEN ./Makefile
CHK include/generated/uapi/linux/version.h
Using /home/acme/git/linux as source for kernel
CHK include/generated/utsrelease.h
CHK include/generated/timeconst.h
CHK include/generated/bounds.h
CHK include/generated/asm-offsets.h
CALL /home/acme/git/linux/scripts/checksyscalls.sh
HOSTCC samples/bpf/test_verifier.o
HOSTCC samples/bpf/libbpf.o
HOSTCC samples/bpf/../../tools/lib/bpf/bpf.o
HOSTCC samples/bpf/test_maps.o
HOSTCC samples/bpf/sock_example.o
HOSTCC samples/bpf/bpf_load.o
<SNIP>
HOSTLD samples/bpf/trace_event
HOSTLD samples/bpf/sampleip
HOSTLD samples/bpf/tc_l2_redirect
make[1]: Leaving directory '/home/build/v4.9.0-rc8+'
$
Also tested the offwaketime resulting from the rebuild, seems to work as
before.
Signed-off-by: Joe Stringer <joe@ovn.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20161209024620.31660-7-joe@ovn.org
[ Use -I$(srctree)/tools/lib/ to support out of source code tree builds ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Only one of the examples declare the bpf_insn bpf proggie as a const:
$ grep 'struct bpf_insn [a-z]' samples/bpf/*.c
samples/bpf/fds_example.c: static const struct bpf_insn insns[] = {
samples/bpf/sock_example.c: struct bpf_insn prog[] = {
samples/bpf/test_cgrp2_attach2.c: struct bpf_insn prog[] = {
samples/bpf/test_cgrp2_attach.c: struct bpf_insn prog[] = {
samples/bpf/test_cgrp2_sock.c: struct bpf_insn prog[] = {
$
Which causes this warning:
[root@f5065a7d6272 linux]# make -j4 O=/tmp/build/linux samples/bpf/
<SNIP>
HOSTCC samples/bpf/fds_example.o
/git/linux/samples/bpf/fds_example.c: In function 'bpf_prog_create':
/git/linux/samples/bpf/fds_example.c:63:6: warning: passing argument 2 of 'bpf_load_program' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers]
insns, insns_cnt, "GPL", 0,
^~~~~
In file included from /git/linux/samples/bpf/libbpf.h:5:0,
from /git/linux/samples/bpf/bpf_load.h:4,
from /git/linux/samples/bpf/fds_example.c:15:
/git/linux/tools/lib/bpf/bpf.h:31:5: note: expected 'struct bpf_insn *' but argument is of type 'const struct bpf_insn *'
int bpf_load_program(enum bpf_prog_type type, struct bpf_insn *insns,
^~~~~~~~~~~~~~~~
HOSTCC samples/bpf/sockex1_user.o
So just ditch that 'const' to reduce build noise, leaving changing the
bpf_load_program() bpf_insn parameter to const to a later patch, if deemed
adequate.
Cc: Joe Stringer <joe@ovn.org>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-1z5xee8n3oa66jf62bpv16ed@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit d8c5b17f2b ("samples: bpf: add userspace example for attaching
eBPF programs to cgroups") added these functions to samples/libbpf, but
during this merge all of the samples libbpf functionality is shifting to
tools/lib/bpf. Shift these functions there.
Committer notes:
Use bzero + attr.FIELD = value instead of 'attr = { .FIELD = value, just
like the other wrapper calls to sys_bpf with bpf_attr to make this build
in older toolchais, such as the ones in CentOS 5 and 6.
Signed-off-by: Joe Stringer <joe@ovn.org>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-au2zvtsh55vqeo3v3uw7jr4c@git.kernel.org
Link: 353e6f298c.patch
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now that libbpf under tools/lib/bpf/* is synced with the version from
samples/bpf, we can get rid most of the libbpf library here.
Committer notes:
Built it in a docker fedora rawhide container and ran it in the f25 host, seems
to work just like it did before this patch, i.e. the switch to tools/lib/bpf/
doesn't seem to have introduced problems and Joe said he tested it with
all the entries in samples/bpf/ and other code he found:
[root@f5065a7d6272 linux]# make -j4 O=/tmp/build/linux headers_install
<SNIP>
[root@f5065a7d6272 linux]# rm -rf /tmp/build/linux/samples/bpf/
[root@f5065a7d6272 linux]# make -j4 O=/tmp/build/linux samples/bpf/
make[1]: Entering directory '/tmp/build/linux'
CHK include/config/kernel.release
HOSTCC scripts/basic/fixdep
GEN ./Makefile
CHK include/generated/uapi/linux/version.h
Using /git/linux as source for kernel
CHK include/generated/utsrelease.h
HOSTCC scripts/basic/bin2c
HOSTCC arch/x86/tools/relocs_32.o
HOSTCC arch/x86/tools/relocs_64.o
LD samples/bpf/built-in.o
<SNIP>
HOSTCC samples/bpf/fds_example.o
HOSTCC samples/bpf/sockex1_user.o
/git/linux/samples/bpf/fds_example.c: In function 'bpf_prog_create':
/git/linux/samples/bpf/fds_example.c:63:6: warning: passing argument 2 of 'bpf_load_program' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers]
insns, insns_cnt, "GPL", 0,
^~~~~
In file included from /git/linux/samples/bpf/libbpf.h:5:0,
from /git/linux/samples/bpf/bpf_load.h:4,
from /git/linux/samples/bpf/fds_example.c:15:
/git/linux/tools/lib/bpf/bpf.h:31:5: note: expected 'struct bpf_insn *' but argument is of type 'const struct bpf_insn *'
int bpf_load_program(enum bpf_prog_type type, struct bpf_insn *insns,
^~~~~~~~~~~~~~~~
HOSTCC samples/bpf/sockex2_user.o
<SNIP>
HOSTCC samples/bpf/xdp_tx_iptunnel_user.o
clang -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/6.2.1/include -I/git/linux/arch/x86/include -I./arch/x86/include/generated/uapi -I./arch/x86/include/generated -I/git/linux/include -I./include -I/git/linux/arch/x86/include/uapi -I/git/linux/include/uapi -I./include/generated/uapi -include /git/linux/include/linux/kconfig.h \
-D__KERNEL__ -D__ASM_SYSREG_H -Wno-unused-value -Wno-pointer-sign \
-Wno-compare-distinct-pointer-types \
-Wno-gnu-variable-sized-type-not-at-end \
-Wno-address-of-packed-member -Wno-tautological-compare \
-O2 -emit-llvm -c /git/linux/samples/bpf/sockex1_kern.c -o -| llc -march=bpf -filetype=obj -o samples/bpf/sockex1_kern.o
HOSTLD samples/bpf/tc_l2_redirect
<SNIP>
HOSTLD samples/bpf/lwt_len_hist
HOSTLD samples/bpf/xdp_tx_iptunnel
make[1]: Leaving directory '/tmp/build/linux'
[root@f5065a7d6272 linux]#
And then, in the host:
[root@jouet bpf]# mount | grep "docker.*devicemapper\/"
/dev/mapper/docker-253:0-1705076-9bd8aa1e0af33adce89ff42090847868ca676932878942be53941a06ec5923f9 on /var/lib/docker/devicemapper/mnt/9bd8aa1e0af33adce89ff42090847868ca676932878942be53941a06ec5923f9 type xfs (rw,relatime,context="system_u:object_r:container_file_t:s0:c73,c276",nouuid,attr2,inode64,sunit=1024,swidth=1024,noquota)
[root@jouet bpf]# cd /var/lib/docker/devicemapper/mnt/9bd8aa1e0af33adce89ff42090847868ca676932878942be53941a06ec5923f9/rootfs/tmp/build/linux/samples/bpf/
[root@jouet bpf]# file offwaketime
offwaketime: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, for GNU/Linux 2.6.32, BuildID[sha1]=f423d171e0487b2f802b6a792657f0f3c8f6d155, not stripped
[root@jouet bpf]# readelf -SW offwaketime
offwaketime offwaketime_kern.o offwaketime_user.o
[root@jouet bpf]# readelf -SW offwaketime_kern.o
There are 11 section headers, starting at offset 0x700:
Section Headers:
[Nr] Name Type Address Off Size ES Flg Lk Inf Al
[ 0] NULL 0000000000000000 000000 000000 00 0 0 0
[ 1] .strtab STRTAB 0000000000000000 000658 0000a8 00 0 0 1
[ 2] .text PROGBITS 0000000000000000 000040 000000 00 AX 0 0 4
[ 3] kprobe/try_to_wake_up PROGBITS 0000000000000000 000040 0000d8 00 AX 0 0 8
[ 4] .relkprobe/try_to_wake_up REL 0000000000000000 0005a8 000020 10 10 3 8
[ 5] tracepoint/sched/sched_switch PROGBITS 0000000000000000 000118 000318 00 AX 0 0 8
[ 6] .reltracepoint/sched/sched_switch REL 0000000000000000 0005c8 000090 10 10 5 8
[ 7] maps PROGBITS 0000000000000000 000430 000050 00 WA 0 0 4
[ 8] license PROGBITS 0000000000000000 000480 000004 00 WA 0 0 1
[ 9] version PROGBITS 0000000000000000 000484 000004 00 WA 0 0 4
[10] .symtab SYMTAB 0000000000000000 000488 000120 18 1 4 8
Key to Flags:
W (write), A (alloc), X (execute), M (merge), S (strings)
I (info), L (link order), G (group), T (TLS), E (exclude), x (unknown)
O (extra OS processing required) o (OS specific), p (processor specific)
[root@jouet bpf]# ./offwaketime | head -3
qemu-system-x86;entry_SYSCALL_64_fastpath;sys_ppoll;do_sys_poll;poll_schedule_timeout;schedule_hrtimeout_range;schedule_hrtimeout_range_clock;schedule;__schedule;-;try_to_wake_up;hrtimer_wakeup;__hrtimer_run_queues;hrtimer_interrupt;local_apic_timer_interrupt;smp_apic_timer_interrupt;__irqentry_text_start;cpuidle_enter_state;cpuidle_enter;call_cpuidle;cpu_startup_entry;rest_init;start_kernel;x86_64_start_reservations;x86_64_start_kernel;start_cpu;;swapper/0 4
firefox;entry_SYSCALL_64_fastpath;sys_poll;do_sys_poll;poll_schedule_timeout;schedule_hrtimeout_range;schedule_hrtimeout_range_clock;schedule;__schedule;-;try_to_wake_up;pollwake;__wake_up_common;__wake_up_sync_key;pipe_write;__vfs_write;vfs_write;sys_write;entry_SYSCALL_64_fastpath;;Timer 1
swapper/2;start_cpu;start_secondary;cpu_startup_entry;schedule_preempt_disabled;schedule;__schedule;-;---;; 61
[root@jouet bpf]#
Signed-off-by: Joe Stringer <joe@ovn.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: netdev@vger.kernel.org
Link: 5c40f54a52.patch
Link: http://lkml.kernel.org/n/tip-xr8twtx7sjh5821g8qw47yxk@git.kernel.org
[ Use -I$(srctree)/tools/lib/ to support out of source code tree builds, as noticed by Wang Nan ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
While testing Joe's conversion of samples/bpf/ to use tools/lib/bpf/ I noticed
some warnings building samples/bpf/ on a Fedora Rawhide container, with
clang/llvm 3.9 I noticed this:
[root@1e797fdfbf4f linux]# make -j4 O=/tmp/build/linux/ samples/bpf/
make[1]: Entering directory '/tmp/build/linux'
CHK include/config/kernel.release
GEN ./Makefile
CHK include/generated/uapi/linux/version.h
Using /git/linux as source for kernel
<SNIP>
HOSTCC samples/bpf/trace_output_user.o
/git/linux/samples/bpf/trace_output_user.c:64:6: warning: no previous
prototype for 'perf_event_read' [-Wmissing-prototypes]
void perf_event_read(print_fn fn)
^~~~~~~~~~~~~~~
HOSTLD samples/bpf/trace_output
make[1]: Leaving directory '/tmp/build/linux'
Shut up the compiler by making that function static.
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Joe Stringer <joe@ovn.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20161215152927.GC6866@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull kbuild updates from Michal Marek:
- prototypes for x86 asm-exported symbols (Adam Borowski) and a warning
about missing CRCs (Nick Piggin)
- asm-exports fix for LTO (Nicolas Pitre)
- thin archives improvements (Nick Piggin)
- linker script fix for CONFIG_LD_DEAD_CODE_DATA_ELIMINATION (Nick
Piggin)
- genksyms support for __builtin_va_list keyword
- misc minor fixes
* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
x86/kbuild: enable modversions for symbols exported from asm
kbuild: fix scripts/adjust_autoksyms.sh* for the no modules case
scripts/kallsyms: remove last remnants of --page-offset option
make use of make variable CURDIR instead of calling pwd
kbuild: cmd_export_list: tighten the sed script
kbuild: minor improvement for thin archives build
kbuild: modpost warn if export version crc is missing
kbuild: keep data tables through dead code elimination
kbuild: improve linker compatibility with lib-ksyms.o build
genksyms: Regenerate parser
kbuild/genksyms: handle va_list type
kbuild: thin archives for multi-y targets
kbuild: kallsyms allow 3-pass generation if symbols size has changed
o STM can hook into the function tracer
o Function filtering now supports more advance glob matching
o Ftrace selftests updates and added tests
o Softirq tag in traces now show only softirqs
o ARM nop added to non traced locations at compile time
o New trace_marker_raw file that allows for binary input
o Optimizations to the ring buffer
o Removal of kmap in trace_marker
o Wakeup and irqsoff tracers now adhere to the set_graph_notrace file
o Other various fixes and clean ups
Note, there are two patches marked for stable. These were discovered
near the end of the 4.9 rc release cycle. By the time I had them tested
it was just a matter of days before 4.9 would be released, and I
figured I would just submit them in the merge window. They are old
bugs and not critical. Nothing non-root could abuse.
-----BEGIN PGP SIGNATURE-----
iQExBAABCAAbBQJYUrFHFBxyb3N0ZWR0QGdvb2RtaXMub3JnAAoJEMm5BfJq2Y3L
2+AIAIr20kSQV/nA5htGAeCTobVk3WUxY6bvjd9mIJDKPP19akNLyREW0G3KnfCr
yhx4aFRZG98fRu/6F8qieRosyN36lADDVYHelMFHMpcTOpE2aZGjaaOuNGxOEA9v
FmMPTX+K3+dzKyFP4l68R3+5JuQ1/AqLTioTWeLW8IDQ2OOVsjD8+0BuXrNKMJDY
o6U4Hk5U/vn+zHc6BmgBzloAXemBd7iJ1t5V3FRRGvm8yv3HU85Twc5ofGeYTWvB
J8PboEywRlIzxg0Kd8mxnMI5PgaKZSEc2ub8E7cY/CZ5PYpDE2xDA2hJmJgfYp00
1VW+DHRpRZfElsCcya6S6P4bs5Y=
=MGZ/
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"This release has a few updates:
- STM can hook into the function tracer
- Function filtering now supports more advance glob matching
- Ftrace selftests updates and added tests
- Softirq tag in traces now show only softirqs
- ARM nop added to non traced locations at compile time
- New trace_marker_raw file that allows for binary input
- Optimizations to the ring buffer
- Removal of kmap in trace_marker
- Wakeup and irqsoff tracers now adhere to the set_graph_notrace file
- Other various fixes and clean ups"
* tag 'trace-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (42 commits)
selftests: ftrace: Shift down default message verbosity
kprobes/trace: Fix kprobe selftest for newer gcc
tracing/kprobes: Add a helper method to return number of probe hits
tracing/rb: Init the CPU mask on allocation
tracing: Use SOFTIRQ_OFFSET for softirq dectection for more accurate results
tracing/fgraph: Have wakeup and irqsoff tracers ignore graph functions too
fgraph: Handle a case where a tracer ignores set_graph_notrace
tracing: Replace kmap with copy_from_user() in trace_marker writing
ftrace/x86_32: Set ftrace_stub to weak to prevent gcc from using short jumps to it
tracing: Allow benchmark to be enabled at early_initcall()
tracing: Have system enable return error if one of the events fail
tracing: Do not start benchmark on boot up
tracing: Have the reg function allow to fail
ring-buffer: Force rb_end_commit() and rb_set_commit_to_write() inline
ring-buffer: Froce rb_update_write_stamp() to be inlined
ring-buffer: Force inline of hotpath helper functions
tracing: Make __buffer_unlock_commit() always_inline
tracing: Make tracepoint_printk a static_key
ring-buffer: Always inline rb_event_data()
ring-buffer: Make rb_reserve_next_event() always inlined
...
Switch all of the sample code to use the function names from
tools/lib/bpf so that they're consistent with that, and to declare their
own log buffers. This allow the next commit to be purely devoted to
getting rid of the duplicate library in samples/bpf.
Committer notes:
Testing it:
On a fedora rawhide container, with clang/llvm 3.9, sharing the host
linux kernel git tree:
# make O=/tmp/build/linux/ headers_install
# make O=/tmp/build/linux -C samples/bpf/
Since I forgot to make it privileged, just tested it outside the
container, using what it generated:
# uname -a
Linux jouet 4.9.0-rc8+ #1 SMP Mon Dec 12 11:20:49 BRT 2016 x86_64 x86_64 x86_64 GNU/Linux
# cd /var/lib/docker/devicemapper/mnt/c43e09a53ff56c86a07baf79847f00e2cc2a17a1e2220e1adbf8cbc62734feda/rootfs/tmp/build/linux/samples/bpf/
# ls -la offwaketime
-rwxr-xr-x. 1 root root 24200 Dec 15 12:19 offwaketime
# file offwaketime
offwaketime: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, for GNU/Linux 2.6.32, BuildID[sha1]=c940d3f127d5e66cdd680e42d885cb0b64f8a0e4, not stripped
# readelf -SW offwaketime_kern.o | grep PROGBITS
[ 2] .text PROGBITS 0000000000000000 000040 000000 00 AX 0 0 4
[ 3] kprobe/try_to_wake_up PROGBITS 0000000000000000 000040 0000d8 00 AX 0 0 8
[ 5] tracepoint/sched/sched_switch PROGBITS 0000000000000000 000118 000318 00 AX 0 0 8
[ 7] maps PROGBITS 0000000000000000 000430 000050 00 WA 0 0 4
[ 8] license PROGBITS 0000000000000000 000480 000004 00 WA 0 0 1
[ 9] version PROGBITS 0000000000000000 000484 000004 00 WA 0 0 4
# ./offwaketime | head -5
swapper/1;start_secondary;cpu_startup_entry;schedule_preempt_disabled;schedule;__schedule;-;---;; 106
CPU 0/KVM;entry_SYSCALL_64_fastpath;sys_ioctl;do_vfs_ioctl;kvm_vcpu_ioctl;kvm_arch_vcpu_ioctl_run;kvm_vcpu_block;schedule;__schedule;-;try_to_wake_up;swake_up_locked;swake_up;apic_timer_expired;apic_timer_fn;__hrtimer_run_queues;hrtimer_interrupt;local_apic_timer_interrupt;smp_apic_timer_interrupt;__irqentry_text_start;cpuidle_enter;call_cpuidle;cpu_startup_entry;start_secondary;;swapper/3 2
Compositor;entry_SYSCALL_64_fastpath;sys_futex;do_futex;futex_wait;futex_wait_queue_me;schedule;__schedule;-;try_to_wake_up;futex_requeue;do_futex;sys_futex;entry_SYSCALL_64_fastpath;;SoftwareVsyncTh 5
firefox;entry_SYSCALL_64_fastpath;sys_poll;do_sys_poll;poll_schedule_timeout;schedule_hrtimeout_range;schedule_hrtimeout_range_clock;schedule;__schedule;-;try_to_wake_up;pollwake;__wake_up_common;__wake_up_sync_key;pipe_write;__vfs_write;vfs_write;sys_write;entry_SYSCALL_64_fastpath;;Timer 13
JS Helper;entry_SYSCALL_64_fastpath;sys_futex;do_futex;futex_wait;futex_wait_queue_me;schedule;__schedule;-;try_to_wake_up;do_futex;sys_futex;entry_SYSCALL_64_fastpath;;firefox 2
#
Signed-off-by: Joe Stringer <joe@ovn.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: netdev@vger.kernel.org
Link: http://lkml.kernel.org/r/20161214224342.12858-2-joe@ovn.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull security subsystem updates from James Morris:
"Generally pretty quiet for this release. Highlights:
Yama:
- allow ptrace access for original parent after re-parenting
TPM:
- add documentation
- many bugfixes & cleanups
- define a generic open() method for ascii & bios measurements
Integrity:
- Harden against malformed xattrs
SELinux:
- bugfixes & cleanups
Smack:
- Remove unnecessary smack_known_invalid label
- Do not apply star label in smack_setprocattr hook
- parse mnt opts after privileges check (fixes unpriv DoS vuln)"
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (56 commits)
Yama: allow access for the current ptrace parent
tpm: adjust return value of tpm_read_log
tpm: vtpm_proxy: conditionally call tpm_chip_unregister
tpm: Fix handling of missing event log
tpm: Check the bios_dir entry for NULL before accessing it
tpm: return -ENODEV if np is not set
tpm: cleanup of printk error messages
tpm: replace of_find_node_by_name() with dev of_node property
tpm: redefine read_log() to handle ACPI/OF at runtime
tpm: fix the missing .owner in tpm_bios_measurements_ops
tpm: have event log use the tpm_chip
tpm: drop tpm1_chip_register(/unregister)
tpm: replace dynamically allocated bios_dir with a static array
tpm: replace symbolic permission with octal for securityfs files
char: tpm: fix kerneldoc tpm2_unseal_trusted name typo
tpm_tis: Allow tpm_tis to be bound using DT
tpm, tpm_vtpm_proxy: add kdoc comments for VTPM_PROXY_IOC_NEW_DEV
tpm: Only call pm_runtime_get_sync if device has a parent
tpm: define a generic open() method for ascii & bios measurements
Documentation: tpm: add the Physical TPM device tree binding documentation
...
- VFIO updates for v4.10 primarily include a new Mediated Device
interface, which essentially allows software defined devices to be
exposed to users through VFIO. The host vendor driver providing
this virtual device polices, or mediates user access to the device.
These devices often incorporate portions of real devices, for
instance the primary initial users of this interface expose vGPUs
which allow the user to map mediated devices, or mdevs, to a
portion of a physical GPU. QEMU composes these mdevs into PCI
representations using the existing VFIO user API. This enables
both Intel KVM-GT support, which is also expected to arrive into
Linux mainline during the v4.10 merge window, as well as NVIDIA
vGPU, and also Channel I/O devices (aka CCW devices) for s390
virtualization support. (Kirti Wankhede, Neo Jia)
- Drop unnecessary uses of pcibios_err_to_errno() (Cao Jin)
- Fixes to VFIO capability chain handling (Eric Auger)
- Error handling fixes for fallout from mdev (Christophe JAILLET)
- Notifiers to expose struct kvm to mdev vendor drivers (Jike Song)
- type1 IOMMU model search fixes (Kirti Wankhede, Neo Jia)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)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=gc6j
-----END PGP SIGNATURE-----
Merge tag 'vfio-v4.10-rc1' of git://github.com/awilliam/linux-vfio
Pull VFIO updates from Alex Williamson:
- VFIO updates for v4.10 primarily include a new Mediated Device
interface, which essentially allows software defined devices to be
exposed to users through VFIO. The host vendor driver providing this
virtual device polices, or mediates user access to the device.
These devices often incorporate portions of real devices, for
instance the primary initial users of this interface expose vGPUs
which allow the user to map mediated devices, or mdevs, to a portion
of a physical GPU. QEMU composes these mdevs into PCI representations
using the existing VFIO user API. This enables both Intel KVM-GT
support, which is also expected to arrive into Linux mainline during
the v4.10 merge window, as well as NVIDIA vGPU, and also Channel I/O
devices (aka CCW devices) for s390 virtualization support. (Kirti
Wankhede, Neo Jia)
- Drop unnecessary uses of pcibios_err_to_errno() (Cao Jin)
- Fixes to VFIO capability chain handling (Eric Auger)
- Error handling fixes for fallout from mdev (Christophe JAILLET)
- Notifiers to expose struct kvm to mdev vendor drivers (Jike Song)
- type1 IOMMU model search fixes (Kirti Wankhede, Neo Jia)
* tag 'vfio-v4.10-rc1' of git://github.com/awilliam/linux-vfio: (30 commits)
vfio iommu type1: Fix size argument to vfio_find_dma() in pin_pages/unpin_pages
vfio iommu type1: Fix size argument to vfio_find_dma() during DMA UNMAP.
vfio iommu type1: WARN_ON if notifier block is not unregistered
kvm: set/clear kvm to/from vfio_group when group add/delete
vfio: support notifier chain in vfio_group
vfio: vfio_register_notifier: classify iommu notifier
vfio: Fix handling of error returned by 'vfio_group_get_from_dev()'
vfio: fix vfio_info_cap_add/shift
vfio/pci: Drop unnecessary pcibios_err_to_errno()
MAINTAINERS: Add entry VFIO based Mediated device drivers
docs: Sample driver to demonstrate how to use Mediated device framework.
docs: Sysfs ABI for mediated device framework
docs: Add Documentation for Mediated devices
vfio: Define device_api strings
vfio_platform: Updated to use vfio_set_irqs_validate_and_prepare()
vfio_pci: Updated to use vfio_set_irqs_validate_and_prepare()
vfio: Introduce vfio_set_irqs_validate_and_prepare()
vfio_pci: Update vfio_pci to use vfio_info_add_capability()
vfio: Introduce common function to add capabilities
vfio iommu: Add blocking notifier to notify DMA_UNMAP
...
make already provides the current working directory in a variable, so make
use of it instead of forking a shell. Also replace usage of PWD by
CURDIR. PWD is provided by most shells, but not all, so this makes the
build system more robust.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Michal Marek <mmarek@suse.com>
Some tracepoints have a registration function that gets enabled when the
tracepoint is enabled. There may be cases that the registraction function
must fail (for example, can't allocate enough memory). In this case, the
tracepoint should also fail to register, otherwise the user would not know
why the tracepoint is not working.
Cc: David Howells <dhowells@redhat.com>
Cc: Seiji Aguchi <seiji.aguchi@hds.com>
Cc: Anton Blanchard <anton@samba.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The XDP prog checks if the incoming packet matches any VIP:PORT
combination in the BPF hashmap. If it is, it will encapsulate
the packet with a IPv4/v6 header as instructed by the value of
the BPF hashmap and then XDP_TX it out.
The VIP:PORT -> IP-Encap-Info can be specified by the cmd args
of the user prog.
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds the sample program test_cgrp2_attach2. This program is
similar to test_cgrp2_attach, but it performs automated testing of the
cgroupv2 BPF attached filters. It runs the following checks:
* Simple filter attachment
* Application of filters to child cgroups
* Overriding filters on child cgroups
* Checking that this still works when the parent filter is removed
The filters that are used here are simply allow all / deny all filters, so
it isn't checking the actual functionality of the filters, but rather
the behaviour around detachment / attachment. If net_cls is enabled,
this test will fail.
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch modifies test_current_task_under_cgroup_user. The test has
several helpers around creating a temporary environment for cgroup
testing, and moving the current task around cgroups. This set of
helpers can then be used in other tests.
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
silence some of the clang compiler warnings like:
include/linux/fs.h:2693:9: warning: comparison of unsigned enum expression < 0 is always false
arch/x86/include/asm/processor.h:491:30: warning: taking address of packed member 'sp0' of class or structure 'x86_hw_tss' may result in an unaligned pointer value
include/linux/cgroup-defs.h:326:16: warning: field 'cgrp' with variable sized type 'struct cgroup' not at the end of a struct or class is a GNU extension
since they add too much noise to samples/bpf/ build.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Couple conflicts resolved here:
1) In the MACB driver, a bug fix to properly initialize the
RX tail pointer properly overlapped with some changes
to support variable sized rings.
2) In XGBE we had a "CONFIG_PM" --> "CONFIG_PM_SLEEP" fix
overlapping with a reorganization of the driver to support
ACPI, OF, as well as PCI variants of the chip.
3) In 'net' we had several probe error path bug fixes to the
stmmac driver, meanwhile a lot of this code was cleaned up
and reorganized in 'net-next'.
4) The cls_flower classifier obtained a helper function in
'net-next' called __fl_delete() and this overlapped with
Daniel Borkamann's bug fix to use RCU for object destruction
in 'net'. It also overlapped with Jiri's change to guard
the rhashtable_remove_fast() call with a check against
tc_skip_sw().
5) In mlx4, a revert bug fix in 'net' overlapped with some
unrelated changes in 'net-next'.
6) In geneve, a stale header pointer after pskb_expand_head()
bug fix in 'net' overlapped with a large reorganization of
the same code in 'net-next'. Since the 'net-next' code no
longer had the bug in question, there was nothing to do
other than to simply take the 'net-next' hunks.
Signed-off-by: David S. Miller <davem@davemloft.net>
Add examples preventing a process in a cgroup from opening a socket
based family, protocol and type.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for section names starting with cgroup/skb and cgroup/sock.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a simple program to demonstrate the ability to attach a bpf program
to a cgroup that sets sk_bound_dev_if for AF_INET{6} sockets when they
are created.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix the following build error:
HOSTCC samples/bpf/test_lru_dist.o
../samples/bpf/test_lru_dist.c:25:22: fatal error: bpf_util.h: No such file or directory
This is due to objtree != srctree.
Use srctree, since that's where bpf_util.h is located.
Fixes: e00c7b216f ("bpf: fix multiple issues in selftest suite and samples")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
