The existing mainline clang development version encounters difficulties
compiling the LoongArch kernel module. It is anticipated that this issue
will be resolved in the upcoming 18.0.0 release. To prevent user
confusion arising from broken builds, it is advisable to raise the
minimum required clang version for LoongArch to 18.0.0.
Suggested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/1941
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: WANG Rui <wangrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
With recent trunk versions of binutils and gcc, alignment directives are
represented with R_LARCH_ALIGN relocs on LoongArch, which is necessary
for the linker to maintain alignment requirements during its relaxation
passes. And even though the kernel is built with relaxation disabled, so
far a small number of R_LARCH_RELAX marker relocs are still emitted as
part of la.* pseudo instructions in assembly. These two kinds of relocs
do not refer to symbols, which can trip up modpost's section mismatch
checks, because the r_offset of said relocs can be zero or any other
meaningless value, eventually leading to a `from == NULL` condition in
default_mismatch_handler and SIGSEGV.
As the two kinds of relocs are not concerned with symbols, just ignore
them for section mismatch check purposes.
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
GNU's addr2line can have problems parsing a vmlinux built with LLVM,
particularly when LTO was used. In order to decode the traces correctly
this patch adds the ability to switch to LLVM's utilities readelf and
addr2line. The same approach is followed by Will in [1].
Before:
$ scripts/decode_stacktrace.sh vmlinux < kernel.log
[17716.240635] Call trace:
[17716.240646] skb_cow_data (??:?)
[17716.240654] esp6_input (ld-temp.o:?)
[17716.240666] xfrm_input (ld-temp.o:?)
[17716.240674] xfrm6_rcv (??:?)
[...]
After:
$ LLVM=1 scripts/decode_stacktrace.sh vmlinux < kernel.log
[17716.240635] Call trace:
[17716.240646] skb_cow_data (include/linux/skbuff.h:2172 net/core/skbuff.c:4503)
[17716.240654] esp6_input (net/ipv6/esp6.c:977)
[17716.240666] xfrm_input (net/xfrm/xfrm_input.c:659)
[17716.240674] xfrm6_rcv (net/ipv6/xfrm6_input.c:172)
[...]
Note that one could set CROSS_COMPILE=llvm- instead to hack around this
issue. However, doing so can break the decodecode routine as it will
force the selection of other LLVM utilities down the line e.g. llvm-as.
[1] https://lore.kernel.org/all/20230914131225.13415-3-will@kernel.org/
Link: https://lkml.kernel.org/r/20230929034836.403735-1-cmllamas@google.com
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Elliot Berman <quic_eberman@quicinc.com>
Tested-by: Justin Stitt <justinstitt@google.com>
Cc: Will Deacon <will@kernel.org>
Cc: John Stultz <jstultz@google.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Tom Rix <trix@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
- The minimum Sphinx requirement has been raised to 2.4.4, following a
warning that was added in 6.2.
- Some reworking of the Documentation/process front page to, hopefully,
make it more useful.
- Various kernel-doc tweaks to, for example, make it deal properly with
__counted_by annotations.
- We have also restored a warning for documentation of nonexistent
structure members that disappeared a while back. That had the delightful
consequence of adding some 600 warnings to the docs build. A sustained
effort by Randy, Vegard, and myself has addressed almost all of those,
bringing the documentation back into sync with the code. The fixes are
going through the appropriate maintainer trees.
- Various improvements to the HTML rendered docs, including automatic links
to Git revisions and a nice new pulldown to make translations easy to
access.
- Speaking of translations, more of those for Spanish and Chinese.
...plus the usual stream of documentation updates and typo fixes.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmWcRKMPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YTKIH/AxBt/3iWt40dPf18arZHLU6tdUbmg01ttef
CNKWkniCmABGKc//KYDXvjZMRDt0YlrS0KgUzrb8nIQTBlZG40D+88EwjXE0HeGP
xt1Fk7OPOiJEqBZ3HEe0PDVfOiA+4yR6CmDKklCJuKg77X9atklneBwPUw/cOASk
CWj+BdbwPBiSNQv48Lp87rGusKwnH/g0MN2uS0z9MPr1DYjM1K8+ngZjGW24lZHt
qs5yhP43mlZGBF/lwNJXQp/xhnKAqJ9XwylBX9Wmaoxaz9yyzNVsADGvROMudgzi
9YB+Jdy7Z0JSrVoLIRhUuDOv7aW8vk+8qLmGJt2aTIsqehbQ6pk=
=fCtT
-----END PGP SIGNATURE-----
Merge tag 'docs-6.8' of git://git.lwn.net/linux
Pull documentation update from Jonathan Corbet:
"Another moderately busy cycle for documentation, including:
- The minimum Sphinx requirement has been raised to 2.4.4, following
a warning that was added in 6.2
- Some reworking of the Documentation/process front page to,
hopefully, make it more useful
- Various kernel-doc tweaks to, for example, make it deal properly
with __counted_by annotations
- We have also restored a warning for documentation of nonexistent
structure members that disappeared a while back. That had the
delightful consequence of adding some 600 warnings to the docs
build. A sustained effort by Randy, Vegard, and myself has
addressed almost all of those, bringing the documentation back into
sync with the code. The fixes are going through the appropriate
maintainer trees
- Various improvements to the HTML rendered docs, including automatic
links to Git revisions and a nice new pulldown to make translations
easy to access
- Speaking of translations, more of those for Spanish and Chinese
... plus the usual stream of documentation updates and typo fixes"
* tag 'docs-6.8' of git://git.lwn.net/linux: (57 commits)
MAINTAINERS: use tabs for indent of CONFIDENTIAL COMPUTING THREAT MODEL
A reworked process/index.rst
ring-buffer/Documentation: Add documentation on buffer_percent file
Translated the RISC-V architecture boot documentation.
Docs: remove mentions of fdformat from util-linux
Docs/zh_CN: Fix the meaning of DEBUG to pr_debug()
Documentation: move driver-api/dcdbas to userspace-api/
Documentation: move driver-api/isapnp to userspace-api/
Documentation/core-api : fix typo in workqueue
Documentation/trace: Fixed typos in the ftrace FLAGS section
kernel-doc: handle a void function without producing a warning
scripts/get_abi.pl: ignore some temp files
docs: kernel_abi.py: fix command injection
scripts/get_abi: fix source path leak
CREDITS, MAINTAINERS, docs/process/howto: Update man-pages' maintainer
docs: translations: add translations links when they exist
kernel-doc: Align quick help and the code
MAINTAINERS: add reviewer for Spanish translations
docs: ignore __counted_by attribute in structure definitions
scripts: kernel-doc: Clarify missing struct member description
..
Another routine one in terms of features. In terms of lines, this time
the 'alloc' version upgrade is less prominent, given that it was fairly
small (and we did not have two upgrades).
Toolchain and infrastructure:
- Upgrade to Rust 1.74.1.
The patch release includes a fix for an ICE that the Apple AGX GPU
driver was hitting.
- Support 'srctree'-relative links in Rust code documentation.
- Automate part of the manual constants handling (i.e. the ones not
recognised by 'bindgen').
- Suppress searching builtin sysroot to avoid confusion with installed
sysroots, needed for the to-be-merged arm64 support which uses
a builtin target.
- Ignore '__preserve_most' functions for 'bindgen'.
- Reduce header inclusion bloat in exports.
'kernel' crate:
- Implement 'Debug' for 'CString'.
- Make 'CondVar::wait()' an uninterruptible wait.
'macros' crate:
- Update 'paste!' to accept string literals.
- Improve '#[vtable]' documentation.
Documentation:
- Add testing section (KUnit and 'rusttest' target).
- Remove 'CC=clang' mentions.
- Clarify that 'rustup override' applies to build directory.
-----BEGIN PGP SIGNATURE-----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=w+n8
-----END PGP SIGNATURE-----
Merge tag 'rust-6.8' of https://github.com/Rust-for-Linux/linux
Pull Rust updates from Miguel Ojeda:
"Another routine one in terms of features. In terms of lines, this time
the 'alloc' version upgrade is less prominent, given that it was
fairly small (and we did not have two upgrades)
Toolchain and infrastructure:
- Upgrade to Rust 1.74.1
The patch release includes a fix for an ICE that the Apple AGX GPU
driver was hitting
- Support 'srctree'-relative links in Rust code documentation
- Automate part of the manual constants handling (i.e. the ones not
recognised by 'bindgen')
- Suppress searching builtin sysroot to avoid confusion with
installed sysroots, needed for the to-be-merged arm64 support which
uses a builtin target
- Ignore '__preserve_most' functions for 'bindgen'
- Reduce header inclusion bloat in exports
'kernel' crate:
- Implement 'Debug' for 'CString'
- Make 'CondVar::wait()' an uninterruptible wait
'macros' crate:
- Update 'paste!' to accept string literals
- Improve '#[vtable]' documentation
Documentation:
- Add testing section (KUnit and 'rusttest' target)
- Remove 'CC=clang' mentions
- Clarify that 'rustup override' applies to build directory"
* tag 'rust-6.8' of https://github.com/Rust-for-Linux/linux:
docs: rust: Clarify that 'rustup override' applies to build directory
docs: rust: Add rusttest info
docs: rust: remove `CC=clang` mentions
rust: support `srctree`-relative links
rust: sync: Makes `CondVar::wait()` an uninterruptible wait
rust: upgrade to Rust 1.74.1
rust: Suppress searching builtin sysroot
rust: macros: improve `#[vtable]` documentation
rust: macros: update 'paste!' macro to accept string literals
rust: bindings: rename const binding using sed
rust: Ignore preserve-most functions
rust: replace <linux/module.h> with <linux/export.h> in rust/exports.c
rust: kernel: str: Implement Debug for CString
Core & protocols
----------------
- Analyze and reorganize core networking structs (socks, netdev,
netns, mibs) to optimize cacheline consumption and set up
build time warnings to safeguard against future header changes.
This improves TCP performances with many concurrent connections
up to 40%.
- Add page-pool netlink-based introspection, exposing the
memory usage and recycling stats. This helps indentify
bad PP users and possible leaks.
- Refine TCP/DCCP source port selection to no longer favor even
source port at connect() time when IP_LOCAL_PORT_RANGE is set.
This lowers the time taken by connect() for hosts having
many active connections to the same destination.
- Refactor the TCP bind conflict code, shrinking related socket
structs.
- Refactor TCP SYN-Cookie handling, as a preparation step to
allow arbitrary SYN-Cookie processing via eBPF.
- Tune optmem_max for 0-copy usage, increasing the default value
to 128KB and namespecifying it.
- Allow coalescing for cloned skbs coming from page pools, improving
RX performances with some common configurations.
- Reduce extension header parsing overhead at GRO time.
- Add bridge MDB bulk deletion support, allowing user-space to
request the deletion of matching entries.
- Reorder nftables struct members, to keep data accessed by the
datapath first.
- Introduce TC block ports tracking and use. This allows supporting
multicast-like behavior at the TC layer.
- Remove UAPI support for retired TC qdiscs (dsmark, CBQ and ATM) and
classifiers (RSVP and tcindex).
- More data-race annotations.
- Extend the diag interface to dump TCP bound-only sockets.
- Conditional notification of events for TC qdisc class and actions.
- Support for WPAN dynamic associations with nearby devices, to form
a sub-network using a specific PAN ID.
- Implement SMCv2.1 virtual ISM device support.
- Add support for Batman-avd mulicast packet type.
BPF
---
- Tons of verifier improvements:
- BPF register bounds logic and range support along with a large
test suite
- log improvements
- complete precision tracking support for register spills
- track aligned STACK_ZERO cases as imprecise spilled registers. It
improves the verifier "instructions processed" metric from single
digit to 50-60% for some programs
- support for user's global BPF subprogram arguments with few
commonly requested annotations for a better developer experience
- support tracking of BPF_JNE which helps cases when the compiler
transforms (unsigned) "a > 0" into "if a == 0 goto xxx" and the
like
- several fixes
- Add initial TX metadata implementation for AF_XDP with support in
mlx5 and stmmac drivers. Two types of offloads are supported right
now, that is, TX timestamp and TX checksum offload.
- Fix kCFI bugs in BPF all forms of indirect calls from BPF into
kernel and from kernel into BPF work with CFI enabled. This allows
BPF to work with CONFIG_FINEIBT=y.
- Change BPF verifier logic to validate global subprograms lazily
instead of unconditionally before the main program, so they can be
guarded using BPF CO-RE techniques.
- Support uid/gid options when mounting bpffs.
- Add a new kfunc which acquires the associated cgroup of a task
within a specific cgroup v1 hierarchy where the latter is identified
by its id.
- Extend verifier to allow bpf_refcount_acquire() of a map value field
obtained via direct load which is a use-case needed in sched_ext.
- Add BPF link_info support for uprobe multi link along with bpftool
integration for the latter.
- Support for VLAN tag in XDP hints.
- Remove deprecated bpfilter kernel leftovers given the project
is developed in user-space (https://github.com/facebook/bpfilter).
Misc
----
- Support for parellel TC self-tests execution.
- Increase MPTCP self-tests coverage.
- Updated the bridge documentation, including several so-far
undocumented features.
- Convert all the net self-tests to run in unique netns, to
avoid random failures due to conflict and allow concurrent
runs.
- Add TCP-AO self-tests.
- Add kunit tests for both cfg80211 and mac80211.
- Autogenerate Netlink families documentation from YAML spec.
- Add yml-gen support for fixed headers and recursive nests, the
tool can now generate user-space code for all genetlink families
for which we have specs.
- A bunch of additional module descriptions fixes.
- Catch incorrect freeing of pages belonging to a page pool.
Driver API
----------
- Rust abstractions for network PHY drivers; do not cover yet the
full C API, but already allow implementing functional PHY drivers
in rust.
- Introduce queue and NAPI support in the netdev Netlink interface,
allowing complete access to the device <> NAPIs <> queues
relationship.
- Introduce notifications filtering for devlink to allow control
application scale to thousands of instances.
- Improve PHY validation, requesting rate matching information for
each ethtool link mode supported by both the PHY and host.
- Add support for ethtool symmetric-xor RSS hash.
- ACPI based Wifi band RFI (WBRF) mitigation feature for the AMD
platform.
- Expose pin fractional frequency offset value over new DPLL generic
netlink attribute.
- Convert older drivers to platform remove callback returning void.
- Add support for PHY package MMD read/write.
New hardware / drivers
----------------------
- Ethernet:
- Octeon CN10K devices
- Broadcom 5760X P7
- Qualcomm SM8550 SoC
- Texas Instrument DP83TG720S PHY
- Bluetooth:
- IMC Networks Bluetooth radio
Removed
-------
- WiFi:
- libertas 16-bit PCMCIA support
- Atmel at76c50x drivers
- HostAP ISA/PCMCIA style 802.11b driver
- zd1201 802.11b USB dongles
- Orinoco ISA/PCMCIA 802.11b driver
- Aviator/Raytheon driver
- Planet WL3501 driver
- RNDIS USB 802.11b driver
Drivers
-------
- Ethernet high-speed NICs:
- Intel (100G, ice, idpf):
- allow one by one port representors creation and removal
- add temperature and clock information reporting
- add get/set for ethtool's header split ringparam
- add again FW logging
- adds support switchdev hardware packet mirroring
- iavf: implement symmetric-xor RSS hash
- igc: add support for concurrent physical and free-running timers
- i40e: increase the allowable descriptors
- nVidia/Mellanox:
- Preparation for Socket-Direct multi-dev netdev. That will allow
in future releases combining multiple PFs devices attached to
different NUMA nodes under the same netdev
- Broadcom (bnxt):
- TX completion handling improvements
- add basic ntuple filter support
- reduce MSIX vectors usage for MQPRIO offload
- add VXLAN support, USO offload and TX coalesce completion for P7
- Marvell Octeon EP:
- xmit-more support
- add PF-VF mailbox support and use it for FW notifications for VFs
- Wangxun (ngbe/txgbe):
- implement ethtool functions to operate pause param, ring param,
coalesce channel number and msglevel
- Netronome/Corigine (nfp):
- add flow-steering support
- support UDP segmentation offload
- Ethernet NICs embedded, slower, virtual:
- Xilinx AXI: remove duplicate DMA code adopting the dma engine driver
- stmmac: add support for HW-accelerated VLAN stripping
- TI AM654x sw: add mqprio, frame preemption & coalescing
- gve: add support for non-4k page sizes.
- virtio-net: support dynamic coalescing moderation
- nVidia/Mellanox Ethernet datacenter switches:
- allow firmware upgrade without a reboot
- more flexible support for bridge flooding via the compressed
FID flooding mode
- Ethernet embedded switches:
- Microchip:
- fine-tune flow control and speed configurations in KSZ8xxx
- KSZ88X3: enable setting rmii reference
- Renesas:
- add jumbo frames support
- Marvell:
- 88E6xxx: add "eth-mac" and "rmon" stats support
- Ethernet PHYs:
- aquantia: add firmware load support
- at803x: refactor the driver to simplify adding support for more
chip variants
- NXP C45 TJA11xx: Add MACsec offload support
- Wifi:
- MediaTek (mt76):
- NVMEM EEPROM improvements
- mt7996 Extremely High Throughput (EHT) improvements
- mt7996 Wireless Ethernet Dispatcher (WED) support
- mt7996 36-bit DMA support
- Qualcomm (ath12k):
- support for a single MSI vector
- WCN7850: support AP mode
- Intel (iwlwifi):
- new debugfs file fw_dbg_clear
- allow concurrent P2P operation on DFS channels
- Bluetooth:
- QCA2066: support HFP offload
- ISO: more broadcast-related improvements
- NXP: better recovery in case receiver/transmitter get out of sync
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=1bW6
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"The most interesting thing is probably the networking structs
reorganization and a significant amount of changes is around
self-tests.
Core & protocols:
- Analyze and reorganize core networking structs (socks, netdev,
netns, mibs) to optimize cacheline consumption and set up build
time warnings to safeguard against future header changes
This improves TCP performances with many concurrent connections up
to 40%
- Add page-pool netlink-based introspection, exposing the memory
usage and recycling stats. This helps indentify bad PP users and
possible leaks
- Refine TCP/DCCP source port selection to no longer favor even
source port at connect() time when IP_LOCAL_PORT_RANGE is set. This
lowers the time taken by connect() for hosts having many active
connections to the same destination
- Refactor the TCP bind conflict code, shrinking related socket
structs
- Refactor TCP SYN-Cookie handling, as a preparation step to allow
arbitrary SYN-Cookie processing via eBPF
- Tune optmem_max for 0-copy usage, increasing the default value to
128KB and namespecifying it
- Allow coalescing for cloned skbs coming from page pools, improving
RX performances with some common configurations
- Reduce extension header parsing overhead at GRO time
- Add bridge MDB bulk deletion support, allowing user-space to
request the deletion of matching entries
- Reorder nftables struct members, to keep data accessed by the
datapath first
- Introduce TC block ports tracking and use. This allows supporting
multicast-like behavior at the TC layer
- Remove UAPI support for retired TC qdiscs (dsmark, CBQ and ATM) and
classifiers (RSVP and tcindex)
- More data-race annotations
- Extend the diag interface to dump TCP bound-only sockets
- Conditional notification of events for TC qdisc class and actions
- Support for WPAN dynamic associations with nearby devices, to form
a sub-network using a specific PAN ID
- Implement SMCv2.1 virtual ISM device support
- Add support for Batman-avd mulicast packet type
BPF:
- Tons of verifier improvements:
- BPF register bounds logic and range support along with a large
test suite
- log improvements
- complete precision tracking support for register spills
- track aligned STACK_ZERO cases as imprecise spilled registers.
This improves the verifier "instructions processed" metric from
single digit to 50-60% for some programs
- support for user's global BPF subprogram arguments with few
commonly requested annotations for a better developer
experience
- support tracking of BPF_JNE which helps cases when the compiler
transforms (unsigned) "a > 0" into "if a == 0 goto xxx" and the
like
- several fixes
- Add initial TX metadata implementation for AF_XDP with support in
mlx5 and stmmac drivers. Two types of offloads are supported right
now, that is, TX timestamp and TX checksum offload
- Fix kCFI bugs in BPF all forms of indirect calls from BPF into
kernel and from kernel into BPF work with CFI enabled. This allows
BPF to work with CONFIG_FINEIBT=y
- Change BPF verifier logic to validate global subprograms lazily
instead of unconditionally before the main program, so they can be
guarded using BPF CO-RE techniques
- Support uid/gid options when mounting bpffs
- Add a new kfunc which acquires the associated cgroup of a task
within a specific cgroup v1 hierarchy where the latter is
identified by its id
- Extend verifier to allow bpf_refcount_acquire() of a map value
field obtained via direct load which is a use-case needed in
sched_ext
- Add BPF link_info support for uprobe multi link along with bpftool
integration for the latter
- Support for VLAN tag in XDP hints
- Remove deprecated bpfilter kernel leftovers given the project is
developed in user-space (https://github.com/facebook/bpfilter)
Misc:
- Support for parellel TC self-tests execution
- Increase MPTCP self-tests coverage
- Updated the bridge documentation, including several so-far
undocumented features
- Convert all the net self-tests to run in unique netns, to avoid
random failures due to conflict and allow concurrent runs
- Add TCP-AO self-tests
- Add kunit tests for both cfg80211 and mac80211
- Autogenerate Netlink families documentation from YAML spec
- Add yml-gen support for fixed headers and recursive nests, the tool
can now generate user-space code for all genetlink families for
which we have specs
- A bunch of additional module descriptions fixes
- Catch incorrect freeing of pages belonging to a page pool
Driver API:
- Rust abstractions for network PHY drivers; do not cover yet the
full C API, but already allow implementing functional PHY drivers
in rust
- Introduce queue and NAPI support in the netdev Netlink interface,
allowing complete access to the device <> NAPIs <> queues
relationship
- Introduce notifications filtering for devlink to allow control
application scale to thousands of instances
- Improve PHY validation, requesting rate matching information for
each ethtool link mode supported by both the PHY and host
- Add support for ethtool symmetric-xor RSS hash
- ACPI based Wifi band RFI (WBRF) mitigation feature for the AMD
platform
- Expose pin fractional frequency offset value over new DPLL generic
netlink attribute
- Convert older drivers to platform remove callback returning void
- Add support for PHY package MMD read/write
New hardware / drivers:
- Ethernet:
- Octeon CN10K devices
- Broadcom 5760X P7
- Qualcomm SM8550 SoC
- Texas Instrument DP83TG720S PHY
- Bluetooth:
- IMC Networks Bluetooth radio
Removed:
- WiFi:
- libertas 16-bit PCMCIA support
- Atmel at76c50x drivers
- HostAP ISA/PCMCIA style 802.11b driver
- zd1201 802.11b USB dongles
- Orinoco ISA/PCMCIA 802.11b driver
- Aviator/Raytheon driver
- Planet WL3501 driver
- RNDIS USB 802.11b driver
Driver updates:
- Ethernet high-speed NICs:
- Intel (100G, ice, idpf):
- allow one by one port representors creation and removal
- add temperature and clock information reporting
- add get/set for ethtool's header split ringparam
- add again FW logging
- adds support switchdev hardware packet mirroring
- iavf: implement symmetric-xor RSS hash
- igc: add support for concurrent physical and free-running
timers
- i40e: increase the allowable descriptors
- nVidia/Mellanox:
- Preparation for Socket-Direct multi-dev netdev. That will
allow in future releases combining multiple PFs devices
attached to different NUMA nodes under the same netdev
- Broadcom (bnxt):
- TX completion handling improvements
- add basic ntuple filter support
- reduce MSIX vectors usage for MQPRIO offload
- add VXLAN support, USO offload and TX coalesce completion
for P7
- Marvell Octeon EP:
- xmit-more support
- add PF-VF mailbox support and use it for FW notifications
for VFs
- Wangxun (ngbe/txgbe):
- implement ethtool functions to operate pause param, ring
param, coalesce channel number and msglevel
- Netronome/Corigine (nfp):
- add flow-steering support
- support UDP segmentation offload
- Ethernet NICs embedded, slower, virtual:
- Xilinx AXI: remove duplicate DMA code adopting the dma engine
driver
- stmmac: add support for HW-accelerated VLAN stripping
- TI AM654x sw: add mqprio, frame preemption & coalescing
- gve: add support for non-4k page sizes.
- virtio-net: support dynamic coalescing moderation
- nVidia/Mellanox Ethernet datacenter switches:
- allow firmware upgrade without a reboot
- more flexible support for bridge flooding via the compressed
FID flooding mode
- Ethernet embedded switches:
- Microchip:
- fine-tune flow control and speed configurations in KSZ8xxx
- KSZ88X3: enable setting rmii reference
- Renesas:
- add jumbo frames support
- Marvell:
- 88E6xxx: add "eth-mac" and "rmon" stats support
- Ethernet PHYs:
- aquantia: add firmware load support
- at803x: refactor the driver to simplify adding support for more
chip variants
- NXP C45 TJA11xx: Add MACsec offload support
- Wifi:
- MediaTek (mt76):
- NVMEM EEPROM improvements
- mt7996 Extremely High Throughput (EHT) improvements
- mt7996 Wireless Ethernet Dispatcher (WED) support
- mt7996 36-bit DMA support
- Qualcomm (ath12k):
- support for a single MSI vector
- WCN7850: support AP mode
- Intel (iwlwifi):
- new debugfs file fw_dbg_clear
- allow concurrent P2P operation on DFS channels
- Bluetooth:
- QCA2066: support HFP offload
- ISO: more broadcast-related improvements
- NXP: better recovery in case receiver/transmitter get out of sync"
* tag 'net-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1714 commits)
lan78xx: remove redundant statement in lan78xx_get_eee
lan743x: remove redundant statement in lan743x_ethtool_get_eee
bnxt_en: Fix RCU locking for ntuple filters in bnxt_rx_flow_steer()
bnxt_en: Fix RCU locking for ntuple filters in bnxt_srxclsrldel()
bnxt_en: Remove unneeded variable in bnxt_hwrm_clear_vnic_filter()
tcp: Revert no longer abort SYN_SENT when receiving some ICMP
Revert "mlx5 updates 2023-12-20"
Revert "net: stmmac: Enable Per DMA Channel interrupt"
ipvlan: Remove usage of the deprecated ida_simple_xx() API
ipvlan: Fix a typo in a comment
net/sched: Remove ipt action tests
net: stmmac: Use interrupt mode INTM=1 for per channel irq
net: stmmac: Add support for TX/RX channel interrupt
net: stmmac: Make MSI interrupt routine generic
dt-bindings: net: snps,dwmac: per channel irq
net: phy: at803x: make read_status more generic
net: phy: at803x: add support for cdt cross short test for qca808x
net: phy: at803x: refactor qca808x cable test get status function
net: phy: at803x: generalize cdt fault length function
net: ethernet: cortina: Drop TSO support
...
A series from Baoquan He cleans up the asm-generic/io.h to remove the
ioremap_uc() definition from everything except x86, which still needs it
for pre-PAT systems. This series notably contains a patch from Jiaxun Yang
that converts MIPS to use asm-generic/io.h like every other architecture
does, enabling future cleanups.
Some of my own patches fix -Wmissing-prototype warnings in architecture
specific code across several architectures. This is now needed as the
warning is enabled by default. There are still some remaining warnings
in minor platforms, but the series should catch most of the widely used
ones make them more consistent with one another.
David McKay fixes a bug in __generic_cmpxchg_local() when this is used
on 64-bit architectures. This could currently only affect parisc64
and sparc64.
Additional cleanups address from Linus Walleij, Uwe Kleine-König,
Thomas Huth, and Kefeng Wang help reduce unnecessary inconsistencies
between architectures.
-----BEGIN PGP SIGNATURE-----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=4VQl
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic cleanups from Arnd Bergmann:
"A series from Baoquan He cleans up the asm-generic/io.h to remove the
ioremap_uc() definition from everything except x86, which still needs
it for pre-PAT systems. This series notably contains a patch from
Jiaxun Yang that converts MIPS to use asm-generic/io.h like every
other architecture does, enabling future cleanups.
Some of my own patches fix -Wmissing-prototype warnings in
architecture specific code across several architectures. This is now
needed as the warning is enabled by default. There are still some
remaining warnings in minor platforms, but the series should catch
most of the widely used ones make them more consistent with one
another.
David McKay fixes a bug in __generic_cmpxchg_local() when this is used
on 64-bit architectures. This could currently only affect parisc64 and
sparc64.
Additional cleanups address from Linus Walleij, Uwe Kleine-König,
Thomas Huth, and Kefeng Wang help reduce unnecessary inconsistencies
between architectures"
* tag 'asm-generic-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
asm-generic: Fix 32 bit __generic_cmpxchg_local
Hexagon: Make pfn accessors statics inlines
ARC: mm: Make virt_to_pfn() a static inline
mips: remove extraneous asm-generic/iomap.h include
sparc: Use $(kecho) to announce kernel images being ready
arm64: vdso32: Define BUILD_VDSO32_64 to correct prototypes
csky: fix arch_jump_label_transform_static override
arch: add do_page_fault prototypes
arch: add missing prepare_ftrace_return() prototypes
arch: vdso: consolidate gettime prototypes
arch: include linux/cpu.h for trap_init() prototype
arch: fix asm-offsets.c building with -Wmissing-prototypes
arch: consolidate arch_irq_work_raise prototypes
hexagon: Remove CONFIG_HEXAGON_ARCH_VERSION from uapi header
asm/io: remove unnecessary xlate_dev_mem_ptr() and unxlate_dev_mem_ptr()
mips: io: remove duplicated codes
arch/*/io.h: remove ioremap_uc in some architectures
mips: add <asm-generic/io.h> including
Use debian/<package> for tmpdir, which is the default of debhelper.
This simplifies the code.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
Strictly speaking, 'make headers' should be a part of build-arch
instead of binary-arch.
'make headers' constructs ready-to-copy UAPI headers in the kernel
directory.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
Step 5/10 of the namespace unification of CPU mitigations related Kconfig options.
[ mingo: Converted a few more uses in comments/messages as well. ]
Suggested-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ariel Miculas <amiculas@cisco.com>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20231121160740.1249350-6-leitao@debian.org
many places. The notable patch series are:
- nilfs2 folio conversion from Matthew Wilcox in "nilfs2: Folio
conversions for file paths".
- Additional nilfs2 folio conversion from Ryusuke Konishi in "nilfs2:
Folio conversions for directory paths".
- IA64 remnant removal in Heiko Carstens's "Remove unused code after
IA-64 removal".
- Arnd Bergmann has enabled the -Wmissing-prototypes warning everywhere
in "Treewide: enable -Wmissing-prototypes". This had some followup
fixes:
- Nathan Chancellor has cleaned up the hexagon build in the series
"hexagon: Fix up instances of -Wmissing-prototypes".
- Nathan also addressed some s390 warnings in "s390: A couple of
fixes for -Wmissing-prototypes".
- Arnd Bergmann addresses the same warnings for MIPS in his series
"mips: address -Wmissing-prototypes warnings".
- Baoquan He has made kexec_file operate in a top-down-fitting manner
similar to kexec_load in the series "kexec_file: Load kernel at top of
system RAM if required"
- Baoquan He has also added the self-explanatory "kexec_file: print out
debugging message if required".
- Some checkstack maintenance work from Tiezhu Yang in the series
"Modify some code about checkstack".
- Douglas Anderson has disentangled the watchdog code's logging when
multiple reports are occurring simultaneously. The series is "watchdog:
Better handling of concurrent lockups".
- Yuntao Wang has contributed some maintenance work on the crash code in
"crash: Some cleanups and fixes".
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZZ2R6AAKCRDdBJ7gKXxA
juCVAP4t76qUISDOSKugB/Dn5E4Nt9wvPY9PcufnmD+xoPsgkQD+JVl4+jd9+gAV
vl6wkJDiJO5JZ3FVtBtC3DFA/xHtVgk=
=kQw+
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2024-01-09-10-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"Quite a lot of kexec work this time around. Many singleton patches in
many places. The notable patch series are:
- nilfs2 folio conversion from Matthew Wilcox in 'nilfs2: Folio
conversions for file paths'.
- Additional nilfs2 folio conversion from Ryusuke Konishi in 'nilfs2:
Folio conversions for directory paths'.
- IA64 remnant removal in Heiko Carstens's 'Remove unused code after
IA-64 removal'.
- Arnd Bergmann has enabled the -Wmissing-prototypes warning
everywhere in 'Treewide: enable -Wmissing-prototypes'. This had
some followup fixes:
- Nathan Chancellor has cleaned up the hexagon build in the series
'hexagon: Fix up instances of -Wmissing-prototypes'.
- Nathan also addressed some s390 warnings in 's390: A couple of
fixes for -Wmissing-prototypes'.
- Arnd Bergmann addresses the same warnings for MIPS in his series
'mips: address -Wmissing-prototypes warnings'.
- Baoquan He has made kexec_file operate in a top-down-fitting manner
similar to kexec_load in the series 'kexec_file: Load kernel at top
of system RAM if required'
- Baoquan He has also added the self-explanatory 'kexec_file: print
out debugging message if required'.
- Some checkstack maintenance work from Tiezhu Yang in the series
'Modify some code about checkstack'.
- Douglas Anderson has disentangled the watchdog code's logging when
multiple reports are occurring simultaneously. The series is
'watchdog: Better handling of concurrent lockups'.
- Yuntao Wang has contributed some maintenance work on the crash code
in 'crash: Some cleanups and fixes'"
* tag 'mm-nonmm-stable-2024-01-09-10-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (157 commits)
crash_core: fix and simplify the logic of crash_exclude_mem_range()
x86/crash: use SZ_1M macro instead of hardcoded value
x86/crash: remove the unused image parameter from prepare_elf_headers()
kdump: remove redundant DEFAULT_CRASH_KERNEL_LOW_SIZE
scripts/decode_stacktrace.sh: strip unexpected CR from lines
watchdog: if panicking and we dumped everything, don't re-enable dumping
watchdog/hardlockup: use printk_cpu_sync_get_irqsave() to serialize reporting
watchdog/softlockup: use printk_cpu_sync_get_irqsave() to serialize reporting
watchdog/hardlockup: adopt softlockup logic avoiding double-dumps
kexec_core: fix the assignment to kimage->control_page
x86/kexec: fix incorrect end address passed to kernel_ident_mapping_init()
lib/trace_readwrite.c:: replace asm-generic/io with linux/io
nilfs2: cpfile: fix some kernel-doc warnings
stacktrace: fix kernel-doc typo
scripts/checkstack.pl: fix no space expression between sp and offset
x86/kexec: fix incorrect argument passed to kexec_dprintk()
x86/kexec: use pr_err() instead of kexec_dprintk() when an error occurs
nilfs2: add missing set_freezable() for freezable kthread
kernel: relay: remove relay_file_splice_read dead code, doesn't work
docs: submit-checklist: remove all of "make namespacecheck"
...
The 'scripts' directory was searched under arch/${SRCARCH} to copy
arch/ia64/scripts, but commit cf8e865810 ("arch: Remove Itanium
(IA-64) architecture") removed arch/ia64/ entirely.
There is another 'scripts' directory in arch/um/, but this script
is never executed with SRCARCH=um because UML does not support the
linux-headers package.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
There are two ways of managing separate debug info files:
[1] The executable contains the .gnu_debuglink section, which specifies
the name and the CRC of the separate debug info file.
[2] The executable contains a build ID, and the corresponding debug info
file is placed in the .build-id directory.
We could do both, but the former, which 'make deb-pkg' currently does,
results in complicated installation steps because we need to manually
strip the debug sections, create debug links, and re-sign the modules.
Besides, it is not working with module compression.
This commit abandons the approach [1], and instead opts for [2].
Debian kernel commit de26137e2a9f ("Drop not needed extra step to add
debug links") also stopped adding debug links.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Commit 36862e14e3 ("kbuild: deb-pkg: use dh_listpackages to know
enabled packages") started to require the debhelper tool suite.
Use more dh_* commands in create_package():
- dh_installdocs to install copyright
- dh_installchangelogs to install changelog
- dh_compress to compress changelog
- dh_fixperms to replace the raw chmod command
- dh_gencontrol to replace the raw dpkg-gencontrol command
- dh_md5sums to record the md5sum of included files
- dh_builddeb to replace the raw dpkg-deb command
Set DEB_RULES_REQUIRES_ROOT to 'no' in case debian/rules is executed
directly.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
This is unneeded because the Makefile in the output directory wraps
the top-level Makefile in the srctree.
Just run $(MAKE) irrespective of the build location.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
'make O=... deb-pkg' creates the debian directory in the output
directory. However, currently it is impossible to run debian/rules
created in the separate output directory.
This commit delays the $(srctree) expansion by escaping '$' and by
quoting the entire command, making it possible to run debian/rules in
the output directory.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
Since commit 491b146d4c ("kbuild: builddeb: Eliminate debian/arch
use"), direct execution of debian/rules results in the following error:
dpkg-architecture: error: unknown option 'DEB_HOST_MULTIARCH'
The current code:
dpkg-architecture -a$DEB_HOST_ARCH -qDEB_HOST_MULTIARCH
... does not look sensible because:
- For this code to work correctly, DEB_HOST_ARCH must be pre-defined,
which is true when the packages are built via dpkg-buildpackage.
In this case, DEB_HOST_MULTIARCH is also likely defined, hence there
is no need to query DEB_HOST_MULTIARCH in the first place.
- If DEB_HOST_MULTIARCH is undefined, DEB_HOST_ARCH is likely undefined
too. So, you cannot query DEB_HOST_MULTIARCH in this way. This is
mostly the case where debian/rules is directly executed.
When debian/rules is directly executed, querying DEB_HOST_MUCHARCH is
not enough because we need to know DEB_{BUILD,HOST}_GNU_TYPE as well.
All DEB_* variables are defined when the package build is initiated by
dpkg-buildpackage, but otherwise, let's call dpkg-architecture to set
all DEB_* environment variables.
This requires dpkg 1.20.6 or newer because --print-format option
was added in dpkg commit 7c54fa2b232e ("dpkg-architecture: Add a
--print-format option").
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
After commit '4f628248a578 kbuild: reintroduce ALLSOURCE_ARCHS support for
tags/cscope', find_sources only invoke find_arch_sources.
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
CC: Jike Song <albcamus@gmail.com>
Link: https://lore.kernel.org/r/20231229030654.17474-4-richard.weiyang@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In bash, "! -z" is equivalent to "-n", which seems to be more intuitive.
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
CC: Sam Ravnborg <sam@ravnborg.org>
Link: https://lore.kernel.org/r/20231229030654.17474-3-richard.weiyang@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 'f81b1be40c44 tags: include headers before source files'
introduce two local variables.
Let's add local annotation to make it obvious.
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Link: https://lore.kernel.org/r/20231229030654.17474-2-richard.weiyang@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
According to the manual, -path is more portable than -wholename. Also
for consistency, let's use -path here.
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
CC: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
CC: WANG Cong <xiyou.wangcong@gmail.com>
CC: Michal Marek <mmarek@suse.cz>
Link: https://lore.kernel.org/r/20231229030654.17474-1-richard.weiyang@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit f4ed1009fc ("kbuild: add GNU GLOBAL tags generation") added
support for the GNU Global source tagging system. However, this addition
was not reflected in the script's header comment.
Fixes: f4ed1009fc ("kbuild: add GNU GLOBAL tags generation")
Signed-off-by: René Nyffenegger <mail@renenyffenegger.ch>
Link: https://lore.kernel.org/r/20231217082719.4747-1-mail@renenyffenegger.ch
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently a void function can produce a warning:
main.c:469: warning: contents before sections
This one is from arch/x86/kernel/cpu/sgx/main.c (which is not included
in any produced kernel documentation output).
Handle this by setting $in_doc_sect to 1 whenever any recognized
document section name is processed.
Fixes: f624adef3d ("kernel-doc: limit the "section header:" detection to a select few")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20231226065219.319-1-rdunlap@infradead.org
When there are filenames of the form ".orig" or ".rej" in
the Documenatation/ABI/ subdirectories, there can be confusing or
erroneous output generated. Example: the file
Documenation/ABI/testing/sysfs-bus-papr-pmem.orig causes this
warning message:
Documentation/ABI/testing/sysfs-bus-papr-pmem:2: WARNING: unknown document: '/powerpc/papr_hcalls'
Prevent this by skipping over filenames that may be created by
patch/diff tools etc.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20231228233113.5218-1-rdunlap@infradead.org
The code currently leaks the absolute path of the ABI files into the
rendered documentation.
There exists code to prevent this, but it is not effective when an
absolute path is passed, which it is when $srctree is used.
I consider this to be a minimal, stop-gap fix; a better fix would strip
off the actual prefix instead of hacking it off with a regex.
Link: https://mastodon.social/@vegard/111677490643495163
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20231231235959.3342928-1-vegard.nossum@oracle.com
When parsing emails from .yaml files in particular, stray punctuation
such as a leading '-' can end up in the name. For example, consider a
common YAML section such as:
maintainers:
- devicetree@vger.kernel.org
This would previously be processed by get_maintainer.pl as:
- <devicetree@vger.kernel.org>
Make the logic in clean_file_emails more robust by deleting any
sub-names which consist of common single punctuation marks before
proceeding to the best-effort name extraction logic. The output is then
correct:
devicetree@vger.kernel.org
Some additional comments are added to the function to make things
clearer to future readers.
Link: https://lore.kernel.org/all/0173e76a36b3a9b4e7f324dd3a36fd4a9757f302.camel@perches.com/
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
While the script correctly extracts UTF-8 encoded names from the
MAINTAINERS file, the regular expressions damage my name when parsing
from .yaml files. Fix this by replacing the Latin-1-compatible regular
expressions with the unicode property matcher \p{L}, which matches on
any letter according to the Unicode General Category of letters.
The proposed solution only works if the script uses proper string
encoding from the outset, so instruct Perl to unconditionally open all
files with UTF-8 encoding. This should be safe, as the entire source
tree is either UTF-8 or ASCII encoded anyway. See [1] for a detailed
analysis.
Furthermore, to prevent the \w expression from matching non-ASCII when
checking for whether a name should be escaped with quotes, add the /a
flag to the regular expression. The escaping logic was duplicated in
two places, so it has been factored out into its own function.
The original issue was also identified on the tools mailing list [2].
This should solve the observed side effects there as well.
Link: https://lore.kernel.org/all/dzn6uco4c45oaa3ia4u37uo5mlt33obecv7gghj2l756fr4hdh@mt3cprft3tmq/ [1]
Link: https://lore.kernel.org/tools/20230726-gush-slouching-a5cd41@meerkat/ [2]
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When the kernel log is acquired over a serial cable it is not uncommon for
the log to contain carriage return characters, in addition to the expected
line feeds.
When this output is feed into decode_stacktrace.sh, handle_line() fails to
strip the trailing ']' off the module name, which results in find_module()
not being able to find the referred to kernel module. This is reported to
the user as:
WARNING! Modules path isn't set, but is needed to parse this symbol
The solution is to reconfigure the serial port, or to strip the carriage
returns from the log, but this isn't obvious from the error reported by
the script.
Instead, make decode_stacktrace.sh more user friendly by stripping the
trailing carriage return.
Link: https://lkml.kernel.org/r/20231225-decode-stacktrace-cr-v1-1-9f306f38cdde@quicinc.com
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When I use older version aarch64 objdump (2.24) to disassemble aarch64
vmlinux, I get the result like below. There is no space between sp and
offset.
ffff800008010000 <dw_apb_ictl_handle_irq>:
ffff800008010000: d503233f hint #0x19
ffff800008010004: a9bc7bfd stp x29, x30, [sp,#-64]!
ffff800008010008: 90011e60 adrp x0, ffff80000a3dc000 <num_ictlrs>
ffff80000801000c: 910003fd mov x29, sp
ffff800008010010: a9025bf5 stp x21, x22, [sp,#32]
When I use newer version aarch64 objdump (2.35), I get
the result like below.
There is a space between sp and offset.
ffff800008010000 <dw_apb_ictl_handle_irq>:
ffff800008010000: d503233f paciasp
ffff800008010004: a9bc7bfd stp x29, x30, [sp, #-64]!
ffff800008010008: 90011e60 adrp x0, ffff80000a3dc000 <num_ictlrs>
ffff80000801000c: 910003fd mov x29, sp
ffff800008010010: a9025bf5 stp x21, x22, [sp, #32]
Add no space support of regular expression for old version objdump.
Link: https://lkml.kernel.org/r/20231220073629.2658-1-Kuan-Ying.Lee@mediatek.com
Signed-off-by: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Cc: Casper Li <casper.li@mediatek.com>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Chinwen Chang <chinwen.chang@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Qun-Wei Lin <qun-wei.lin@mediatek.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
According to Documentation/process/submit-checklist.rst, checkstack does
not point out problems explicitly, but any one function that uses more
than 512 bytes on the stack is a candidate for change, hence it is better
to omit any stack frame sizes smaller than 512 bytes, just change
min_stack to 512 by default.
Link: https://lkml.kernel.org/r/20231219125008.23007-5-yangtiezhu@loongson.cn
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
For some unknown reason the regular expression for checkstack only matches
three digit numbers starting with the number "3", or any higher number.
Which means that it skips any stack sizes smaller than 304 bytes. This
makes the checkstack script a bit less useful than it could be.
Change the script to match any number. To be filtered out stack sizes can
be configured with the min_stack variable, which omits any stack frame
sizes smaller than 100 bytes by default.
This is similar with commit aab1f809d7 ("scripts/checkstack.pl: match
all stack sizes for s390").
Link: https://lkml.kernel.org/r/20231219125008.23007-4-yangtiezhu@loongson.cn
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
After commit 572220aad5 ("scripts/checkstack.pl: Add argument to print
stacks greather than value."), it is appropriate to add min_stack to the
usage comment, then the users know explicitly that "min_stack" can be
specified like "arch".
Link: https://lkml.kernel.org/r/20231219125008.23007-3-yangtiezhu@loongson.cn
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
scripts/checkstack.pl lacks support for the loongarch architecture. Add
support to detect "addi.{w,d} $sp, $sp, -FRAME_SIZE" stack frame
generation instruction.
Link: https://lkml.kernel.org/r/MW4PR84MB314514273F0B7DBCC5E35A978192A@MW4PR84MB3145.NAMPRD84.PROD.OUTLOOK.COM
Signed-off-by: Youling Tang <tangyouling@kylinos.cn>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The binary-arch target needs to use the same CROSS_COMPILE as used in
build-arch; otherwise, 'make run-command' may attempt to resync the
.config file.
Squash scripts/package/deb-build-option into debian/rules, as it is a
small amount of code.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
This avoids code duplication between binary-arch and built-arch.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
The condition to require libelf-dev:native is stale because objtool is
now enabled by CONFIG_OBJTOOL instead of CONFIG_UNWINDER_ORC. Not only
objtool but also resolve_btfids requires libelf-dev:native; therefore,
CONFIG_DEBUG_INFO_BTF should be checked as well.
Similarly, CONFIG_SYSTEM_TRUSTED_KEYRING is not the only case that
requires libssl-dev:native.
Perhaps, the following code would provide better coverage, but it is
hard to maintain (and may still be imperfect).
if is_enabled CONFIG_OBJTOOL ||
is_enabled CONFIG_DEBUG_INFO_BTF; then
build_depends="${build_depends}, libelf-dev:native"
fi
if is_enabled CONFIG_SYSTEM_TRUSTED_KEYRING ||
is_enabled CONFIG_SYSTEM_REVOCATION_LIST ||
is_enabled CONFIG_MODULE_SIG_FORMAT; then
build_depends="${build_depends}, libssl-dev:native"
fi
Let's hard-code the build dependency.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
Copy debian/copyright instead of generating it by the 'cat' command.
I also updated '2018' to '2023' while I was here.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
While the kernel community has been good at maintaining backwards
compatibility with kernel UAPIs, it would be helpful to have a tool
to check if a commit introduces changes that break backwards
compatibility.
To that end, introduce check-uapi.sh: a simple shell script that
checks for changes to UAPI headers using libabigail.
libabigail is "a framework which aims at helping developers and
software distributors to spot some ABI-related issues like interface
incompatibility in ELF shared libraries by performing a static
analysis of the ELF binaries at hand."
The script uses one of libabigail's tools, "abidiff", to compile the
changed header before and after the commit to detect any changes.
abidiff "compares the ABI of two shared libraries in ELF format. It
emits a meaningful report describing the differences between the two
ABIs."
The script also includes the ability to check the compatibility of
all UAPI headers across commits. This allows developers to inspect
the stability of the UAPIs over time.
Signed-off-by: John Moon <quic_johmoo@quicinc.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
When reviewing patches, it looks much nicer to have some changes shown
before others, which allow better understanding of the patch before the
the .c files reviewing.
Introduce a default git.orderFile, in order to help developers getting the
best ordering easier.
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
When KCONFIG_WERROR env variable is set treat unmet direct
symbol dependency as a terminal condition (error).
Suggested-by: Stefan Reinauer <reinauer@google.com>
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
When using a custom location for kernel config files this merge config
command fails as it doesn't use the configuration set with
KCONFIG_CONFIG.
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
menu_has_help() and menu_get_help() functions are only used within
menu_get_ext_help().
Squash them into menu_get_ext_help(). It revealed the if-conditional
in menu_get_help() was unneeded, as menu_has_help() has already checked
that menu->help is not NULL.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
When a path contains relative symbolic links, os.path.abspath() might
not follow the symlinks and instead return the absolute path with just
the relative paths resolved, resulting in an incorrect path.
1. Say "drivers/hdf/" has some symlinks:
# ls -l drivers/hdf/
total 364
drwxrwxr-x 2 ... 4096 ... evdev
lrwxrwxrwx 1 ... 44 ... framework -> ../../../../../../drivers/hdf_core/framework
-rw-rw-r-- 1 ... 359010 ... hdf_macro_test.h
lrwxrwxrwx 1 ... 55 ... inner_api -> ../../../../../../drivers/hdf_core/interfaces/inner_api
lrwxrwxrwx 1 ... 53 ... khdf -> ../../../../../../drivers/hdf_core/adapter/khdf/linux
-rw-r--r-- 1 ... 74 ... Makefile
drwxrwxr-x 3 ... 4096 ... wifi
2. One .cmd file records that:
# head -1 ./framework/core/manager/src/.devmgr_service.o.cmd
cmd_drivers/hdf/khdf/manager/../../../../framework/core/manager/src/devmgr_service.o := ... \
/path/to/src/drivers/hdf/khdf/manager/../../../../framework/core/manager/src/devmgr_service.c
3. os.path.abspath returns "/path/to/src/framework/core/manager/src/devmgr_service.c", not correct:
# ./scripts/clang-tools/gen_compile_commands.py
INFO: Could not add line from ./framework/core/manager/src/.devmgr_service.o.cmd: File \
/path/to/src/framework/core/manager/src/devmgr_service.c not found
Use os.path.realpath(), which resolves the symlinks and normalizes the paths correctly.
# cat compile_commands.json
...
{
"command": ...
"directory": ...
"file": "/path/to/bla/drivers/hdf_core/framework/core/manager/src/devmgr_service.c"
},
...
Also fix it in parse_arguments().
Signed-off-by: Jialu Xu <xujialu@vimux.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This is the next upgrade to the Rust toolchain, from 1.73.0 to 1.74.1
(i.e. the latest) [1].
See the upgrade policy [2] and the comments on the first upgrade in
commit 3ed03f4da0 ("rust: upgrade to Rust 1.68.2").
# Unstable features
No unstable features (that we use) were stabilized.
Therefore, the only unstable features allowed to be used outside the
`kernel` crate are still `new_uninit,offset_of`, though other code to
be upstreamed may increase the list (e.g. `offset_of` was added recently).
Please see [3] for details.
# Other improvements
Rust 1.74.0 allows to use `#[repr(Rust)]` explicitly [4], which can be
useful to be explicit about particular cases that would normally use
e.g. the C representation, such as silencing lints like the upcoming
additions we requested [5] to the `no_mangle_with_rust_abi` Clippy lint
(which in turn triggered the `#[repr(Rust)]` addition).
Rust 1.74.0 includes a fix for one of the false negative cases we reported
in Clippy's `disallowed_macros` lint [6] that we would like to use in
the future.
Rust 1.74.1 fixes an ICE that the Apple AGX GPU driver was hitting [7].
# Required changes
For this upgrade, no changes were required (i.e. on our side).
# `alloc` upgrade and reviewing
The vast majority of changes are due to our `alloc` fork being upgraded
at once.
There are two kinds of changes to be aware of: the ones coming from
upstream, which we should follow as closely as possible, and the updates
needed in our added fallible APIs to keep them matching the newer
infallible APIs coming from upstream.
Instead of taking a look at the diff of this patch, an alternative
approach is reviewing a diff of the changes between upstream `alloc` and
the kernel's. This allows to easily inspect the kernel additions only,
especially to check if the fallible methods we already have still match
the infallible ones in the new version coming from upstream.
Another approach is reviewing the changes introduced in the additions in
the kernel fork between the two versions. This is useful to spot
potentially unintended changes to our additions.
To apply these approaches, one may follow steps similar to the following
to generate a pair of patches that show the differences between upstream
Rust and the kernel (for the subset of `alloc` we use) before and after
applying this patch:
# Get the difference with respect to the old version.
git -C rust checkout $(linux/scripts/min-tool-version.sh rustc)
git -C linux ls-tree -r --name-only HEAD -- rust/alloc |
cut -d/ -f3- |
grep -Fv README.md |
xargs -IPATH cp rust/library/alloc/src/PATH linux/rust/alloc/PATH
git -C linux diff --patch-with-stat --summary -R > old.patch
git -C linux restore rust/alloc
# Apply this patch.
git -C linux am rust-upgrade.patch
# Get the difference with respect to the new version.
git -C rust checkout $(linux/scripts/min-tool-version.sh rustc)
git -C linux ls-tree -r --name-only HEAD -- rust/alloc |
cut -d/ -f3- |
grep -Fv README.md |
xargs -IPATH cp rust/library/alloc/src/PATH linux/rust/alloc/PATH
git -C linux diff --patch-with-stat --summary -R > new.patch
git -C linux restore rust/alloc
Now one may check the `new.patch` to take a look at the additions (first
approach) or at the difference between those two patches (second
approach). For the latter, a side-by-side tool is recommended.
Link: https://github.com/rust-lang/rust/blob/stable/RELEASES.md#version-1741-2023-12-07 [1]
Link: https://rust-for-linux.com/rust-version-policy [2]
Link: https://github.com/Rust-for-Linux/linux/issues/2 [3]
Link: https://github.com/rust-lang/rust/pull/114201 [4]
Link: https://github.com/rust-lang/rust-clippy/issues/11219 [5]
Link: https://github.com/rust-lang/rust-clippy/issues/11431 [6]
Link: https://github.com/rust-lang/rust/issues/117976#issuecomment-1822225691 [7]
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Tested-by: David Gow <davidgow@google.com>
Link: https://lore.kernel.org/r/20231214092958.377061-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Over the years we went from > 1000 of warnings to under 100 earlier this
year, and I sent patches to address all the ones that I saw with compile
testing randcom configs on arm64, arm and x86 kernels. This is a really
useful warning, as it catches real bugs when there are mismatched
prototypes. In particular with kernel control flow integrity enabled,
those are no longer allowed.
I have done extensive testing to ensure that there are no new build errors
or warnings on any configuration of x86, arm and arm64 builds. I also
made sure that at least both the normal defconfig and an allmodconfig
build is clean for arc, csky, loongarch, m68k, microblaze, openrisc,
parisc, powerpc, riscv, s390, and xtensa, with the respective maintainers
doing most of the patches.
At this point, there are five architectures with a number of known
regressions: alpha, nios2, mips, sh and sparc. In the previous version of
this patch, I had turned off the missing prototype warnings for the 15
architectures that still had issues, but since there are only five left, I
think we can leave the rest to the maintainers (Cc'd here) as well.
Link: https://lkml.kernel.org/r/20231123110506.707903-7-arnd@kernel.org
Link: https://lore.kernel.org/lkml/20230810141947.1236730-1-arnd@kernel.org/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com> # RISC-V
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Tudor Ambarus <tudor.ambarus@linaro.org>
Cc: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
New device support
------------------
adi,hmc425a
* Add support for ADRF5740 attenuators. Minor changes to driver needed
alongside new IDs.
aosong,ags02ma
* New driver for this volatile organic compounds sensor.
bosch,bmp280
* Add BMP390 (small amount of refactoring + ID)
bosch,bmi323
* New driver to support the BMI323 6-axis IMU.
honeywell,hsc030pa
* New driver supporting a huge number of SSC and HSC series pressure and
temperature sensors.
isil,isl76682
* New driver for this simple Ambient Light sensor.
liteon,ltr390
* New driver for this ambient and ultraviolet light sensor.
maxim,max34408
* New driver to support the MAX34408 and MAX34409 current monitoring ADCs.
melexis,mlx90635
* New driver for this Infrared contactless temperature sensor.
mirochip,mcp9600
* New driver for this thermocouple EMF convertor.
ti,hdc3020
* New driver for this integrated relative humidity and temperature
sensor.
vishay,veml6075
* New driver for this UVA and UVB light sensor.
General features
----------------
Device properties
* Add fwnode_property_match_property_string() helper to allow matching
single value property against an array of predefined strings.
* Use fwnode_property_string_array_count() inside
fwnode_property_match_string() instead of open coding the same.
checkpatch.pl
* Add exclusion of __aligned() from a warning reducing false positives
on IIO drivers (and hopefully beyond)
IIO Features
------------
core
* New light channel modifiers for UVA and UVB.
* Add IIO_CHAN_INFO_TROUGH as counterpart to IIO_CHAN_INFO_PEAK so that
we can support device that keep running track of the lowest value they
have seen in similar fashion to the existing peak tracking.
adi,adis library
* Use spi cs inactive delay even when a burst reading is performed.
As it's now used every time, can centralize the handling in the SPI
setup code in the driver.
adi,ad2s1210
* Support for fixed-mode to this resolver driver where the A0 and A1
pins are hard wired to config mode in which case position and config
must be read from appropriate config registers.
* Support reset GPIO if present.
adi,ad5791
* Allow configuration of presence of external amplifier in DT binding.
adi,adis16400
* Add spi-cs-inactive-delay-ns to bindings to allow it to be tweaked
if default delays are not quite enough for a specific board.
adi,adis16475
* Add spi-cs-inactive-delay-ns to bindings to allow it to be tweaked
if default delays are not quite enough for a specific board.
bosch,bmp280
* Enable multiple chip IDs per family of devices.
rohm,bu27008
* Add an illuminance channel calculated from RGB and IR data.
Cleanup
-------
Minor white space, typos and tidy up not explicitly called out.
Core
* Check that the available_scan_masks array passed to the IIO core
by a driver is sensible by ensuring the entries are ordered so the
minimum number of channels is enabled in the earlier entries (as they
will be selected if sufficient for the requested channels).
* Document that the available_scan_masks infrastructure doesn't currently
handle masks that don't fit in a long int.
* Improve intensity documentation to reflect that there is no expectation
of sensible units (it's dependent on a frequency sensitivity curve)
Various
* Use new device_property_match_property_string() to replace open coded
versions of the same thing.
* Fix a few MAINTAINERS filenames.
* i2c_get_match_data() and spi_get_device_match_data() pushed into
more drivers reducing boilerplate handling.
* Some unnecessary headers removed.
* ACPI_PTR() removals. It's rarely worth using this.
adi,ad7091r (early part of a series adding device support - useful in
their own right)
* Pass iio_dev directly an event handler rather than relying
on broken use of dev_get_drvdata() as drvdata is never set in this driver.
* Make sure alert is turned on.
adi,ad9467 (general driver fixing up as precursor to iio-backend proposal
which is under review for 6.9)
* Fix reset gpio handling to match expected polarity.
* Always handle error codes from spi_writes.
* Add a driver instance local mutex to avoid some races.
* Fix scale setting to align with available scale values.
* Split array of chip_info structures up into named individual elements.
* Convert to regmap.
honeywell,mprls0025pa
* Drop now unnecessary type references in DT binding for properties in
pascals.
invensense,mpu6050
* Don't eat a potentially useful return value from regmap_bulk_write()
invensense,icm42600
* Use max macro to improve code readability and save a few lines.
liteon,ltrf216a
* Improve prevision of light intensity.
microchip,mcp3911
* Use cleanup.h magic.
qcom,spmi*
* Fix wrong descriptions of SPMI reg fields in bindings.
Other
----
mailmap
* Update for Matt Ranostay
-----BEGIN PGP SIGNATURE-----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=jH+G
-----END PGP SIGNATURE-----
Merge tag 'iio-for-6.8a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
1st set of IIO new device support, features and cleanup for 6.8
New device support
------------------
adi,hmc425a
* Add support for ADRF5740 attenuators. Minor changes to driver needed
alongside new IDs.
aosong,ags02ma
* New driver for this volatile organic compounds sensor.
bosch,bmp280
* Add BMP390 (small amount of refactoring + ID)
bosch,bmi323
* New driver to support the BMI323 6-axis IMU.
honeywell,hsc030pa
* New driver supporting a huge number of SSC and HSC series pressure and
temperature sensors.
isil,isl76682
* New driver for this simple Ambient Light sensor.
liteon,ltr390
* New driver for this ambient and ultraviolet light sensor.
maxim,max34408
* New driver to support the MAX34408 and MAX34409 current monitoring ADCs.
melexis,mlx90635
* New driver for this Infrared contactless temperature sensor.
mirochip,mcp9600
* New driver for this thermocouple EMF convertor.
ti,hdc3020
* New driver for this integrated relative humidity and temperature
sensor.
vishay,veml6075
* New driver for this UVA and UVB light sensor.
General features
----------------
Device properties
* Add fwnode_property_match_property_string() helper to allow matching
single value property against an array of predefined strings.
* Use fwnode_property_string_array_count() inside
fwnode_property_match_string() instead of open coding the same.
checkpatch.pl
* Add exclusion of __aligned() from a warning reducing false positives
on IIO drivers (and hopefully beyond)
IIO Features
------------
core
* New light channel modifiers for UVA and UVB.
* Add IIO_CHAN_INFO_TROUGH as counterpart to IIO_CHAN_INFO_PEAK so that
we can support device that keep running track of the lowest value they
have seen in similar fashion to the existing peak tracking.
adi,adis library
* Use spi cs inactive delay even when a burst reading is performed.
As it's now used every time, can centralize the handling in the SPI
setup code in the driver.
adi,ad2s1210
* Support for fixed-mode to this resolver driver where the A0 and A1
pins are hard wired to config mode in which case position and config
must be read from appropriate config registers.
* Support reset GPIO if present.
adi,ad5791
* Allow configuration of presence of external amplifier in DT binding.
adi,adis16400
* Add spi-cs-inactive-delay-ns to bindings to allow it to be tweaked
if default delays are not quite enough for a specific board.
adi,adis16475
* Add spi-cs-inactive-delay-ns to bindings to allow it to be tweaked
if default delays are not quite enough for a specific board.
bosch,bmp280
* Enable multiple chip IDs per family of devices.
rohm,bu27008
* Add an illuminance channel calculated from RGB and IR data.
Cleanup
-------
Minor white space, typos and tidy up not explicitly called out.
Core
* Check that the available_scan_masks array passed to the IIO core
by a driver is sensible by ensuring the entries are ordered so the
minimum number of channels is enabled in the earlier entries (as they
will be selected if sufficient for the requested channels).
* Document that the available_scan_masks infrastructure doesn't currently
handle masks that don't fit in a long int.
* Improve intensity documentation to reflect that there is no expectation
of sensible units (it's dependent on a frequency sensitivity curve)
Various
* Use new device_property_match_property_string() to replace open coded
versions of the same thing.
* Fix a few MAINTAINERS filenames.
* i2c_get_match_data() and spi_get_device_match_data() pushed into
more drivers reducing boilerplate handling.
* Some unnecessary headers removed.
* ACPI_PTR() removals. It's rarely worth using this.
adi,ad7091r (early part of a series adding device support - useful in
their own right)
* Pass iio_dev directly an event handler rather than relying
on broken use of dev_get_drvdata() as drvdata is never set in this driver.
* Make sure alert is turned on.
adi,ad9467 (general driver fixing up as precursor to iio-backend proposal
which is under review for 6.9)
* Fix reset gpio handling to match expected polarity.
* Always handle error codes from spi_writes.
* Add a driver instance local mutex to avoid some races.
* Fix scale setting to align with available scale values.
* Split array of chip_info structures up into named individual elements.
* Convert to regmap.
honeywell,mprls0025pa
* Drop now unnecessary type references in DT binding for properties in
pascals.
invensense,mpu6050
* Don't eat a potentially useful return value from regmap_bulk_write()
invensense,icm42600
* Use max macro to improve code readability and save a few lines.
liteon,ltrf216a
* Improve prevision of light intensity.
microchip,mcp3911
* Use cleanup.h magic.
qcom,spmi*
* Fix wrong descriptions of SPMI reg fields in bindings.
Other
----
mailmap
* Update for Matt Ranostay
* tag 'iio-for-6.8a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (83 commits)
iio: adc: ad7091r: Align arguments to function call parenthesis
iio: adc: ad7091r: Set alert bit in config register
iio: adc: ad7091r: Pass iio_dev to event handler
scripts: checkpatch: Add __aligned to the list of attribute notes
iio: chemical: add support for Aosong AGS02MA
dt-bindings: iio: chemical: add aosong,ags02ma
dt-bindings: vendor-prefixes: add aosong
iio: accel: bmi088: update comments and Kconfig
dt-bindings: iio: humidity: Add TI HDC302x support
iio: humidity: Add driver for ti HDC302x humidity sensors
iio: ABI: document temperature and humidity peak/trough raw attributes
iio: core: introduce trough info element for minimum values
iio: light: driver for Lite-On ltr390
dt-bindings: iio: light: add ltr390
iio: light: isl76682: remove unreachable code
iio: pressure: driver for Honeywell HSC/SSC series
dt-bindings: iio: pressure: add honeywell,hsc030
doc: iio: Document intensity scale as poorly defined
dt-bindings: iio: temperature: add MLX90635 device
iio: temperature: mlx90635 MLX90635 IR Temperature sensor
...
The update to the quick help mentions -Wshort-description, but
code never supported for that. Align that with the code by allowing
both: -Wshort-description and -Wshort-desc.
Fixes: 56b0f453db ("kernel-doc: don't let V=1 change outcome")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20231215150341.1996720-1-andriy.shevchenko@linux.intel.com
kernel-doc appeared to ignore __counted_by, but appearances can be
deceiving; it caused member names to not be recognized, which manifested as
a number of spurious "Excess struct member" warnings. Filter that
attribute out and reduce the warning onslaught slightly.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Checkpatch presumes attributes marked with __aligned(alignment) are part
of a function declaration and throws a warning stating that those
compiler attributes should have an identifier name which is not correct.
Add __aligned compiler attributes to the list of attribute notes
so they don't cause warnings anymore.
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Acked-by: Joe Perches <joe@perches.com>
Link: https://lore.kernel.org/r/1c5c93ecbd8c46a338b22a4ef52e51648e333c01.1702746240.git.marcelo.schmitt1@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The warning for Excess struct or union member description was
removed when the $nested parameter of check_sections() was removed.
This causes some kernel-doc notation warnings to be missed.
Recently the kernel test robot somehow reported an Excess member. The
code in kernel-doc has not issued that warning since kernel v4.16, so I
don't know how the robot did it. (See the Link for the report.)
drivers/net/wireless/intel/iwlwifi/fw/dbg.c:86: warning: Excess struct/union/enum/typedef member 'trans_len' description in 'iwl_fw_dump_ptrs'
I patched that warning away even though I could not reproduce the
warning from kernel-doc. The warning should be issued for extraneous
struct member or union member description, so restore it.
Fixes: 1081de2d2f ("scripts: kernel-doc: get rid of $nested parameter")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/all/202312060810.QT9zourt-lkp@intel.com/
Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20231214070200.24405-1-rdunlap@infradead.org
Commit 31abfdda65 (docs: Deprecate use of Sphinx < 2.4.x) in 6.2 added a
warning that support for older versions of Sphinx would be going away.
There have been no complaints, so the time has come. Raise the minimum
Sphinx version to 2.4.4 and clean out some compatibility code that we no
longer need.
Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Link: https://lore.kernel.org/r/874jgs47fq.fsf@meer.lwn.net
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
By default, if Rust is passed `--target=foo` rather than a target.json
file, it will infer a default sysroot if that component is installed. As
the proposed aarch64 support [1] uses `aarch64-unknown-none` rather than a
target.json file, this is needed [2] to prevent rustc from being confused
between the custom kernel sysroot and the pre-installed one.
[ Miguel: Applied Boqun's extra case (for `rusttest`) and reworded to add
links to the arm64 patch series discussion. In addition, fixed the
`rustdoc` target too (which requires a conditional since `cmd_rustdoc`
is also used for host crates like `macros`). ]
Signed-off-by: Matthew Maurer <mmaurer@google.com>
Tested-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/rust-for-linux/20231020155056.3495121-1-Jamie.Cunliffe@arm.com/ [1]
Link: https://lore.kernel.org/rust-for-linux/CAGSQo01pOixiPXkW867h4vPUaAjtKtHGKhkV-rpifJvKxAf4Ww@mail.gmail.com/ [2]
Link: https://lore.kernel.org/r/20231031201752.1189213-1-mmaurer@google.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
There are some wrong return values check in sign-file when call OpenSSL
API. The ERR() check cond is wrong because of the program only check the
return value is < 0 which ignored the return val is 0. For example:
1. CMS_final() return 1 for success or 0 for failure.
2. i2d_CMS_bio_stream() returns 1 for success or 0 for failure.
3. i2d_TYPEbio() return 1 for success and 0 for failure.
4. BIO_free() return 1 for success and 0 for failure.
Link: https://www.openssl.org/docs/manmaster/man3/
Fixes: e5a2e3c847 ("scripts/sign-file.c: Add support for signing with a raw signature")
Signed-off-by: Yusong Gao <a869920004@gmail.com>
Reviewed-by: Juerg Haefliger <juerg.haefliger@canonical.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20231213024405.624692-1-a869920004@gmail.com/ # v5
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
1. When we crash on a page, we want to check what happened on this
page instead of skipping this page by try-except block. Thus, removing
the try-except block.
2. Remove redundant comma and print the task name properly.
Link: https://lkml.kernel.org/r/20231127070404.4192-4-Kuan-Ying.Lee@mediatek.com
Signed-off-by: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Chinwen Chang <chinwen.chang@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Qun-Wei Lin <qun-wei.lin@mediatek.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
After stackdepot evicting support patchset[1], we rename pool_index to
pools_num.
To avoid from the below issue, we rename consistently in
gdb scripts.
Python Exception <class 'gdb.error'>: No symbol "pool_index" in current
context.
Error occurred in Python: No symbol "pool_index" in current context.
[1] https://lore.kernel.org/linux-mm/cover.1700502145.git.andreyknvl@google.com/
Link: https://lkml.kernel.org/r/20231129065142.13375-3-Kuan-Ying.Lee@mediatek.com
Signed-off-by: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Chinwen Chang <chinwen.chang@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Qun-Wei Lin <qun-wei.lin@mediatek.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Some of the more common spelling mistakes and typos that I've found while
fixing up spelling mistakes in the kernel over the past couple of
releases.
Link: https://lkml.kernel.org/r/20231122104037.1770749-1-colin.i.king@gmail.com
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Sort output by size and in addition by function name. This increases
readability for cases where there are many functions with the same stack
usage.
Link: https://lkml.kernel.org/r/20231120183719.2188479-3-hca@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Cc: Maninder Singh <maninder1.s@samsung.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Vaneet Narang <v.narang@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
ALLOW_ERROR_INJECTION macro (just like EXPORT_SYMBOL) can immediately
follow a function it annotates.
Link: https://lkml.kernel.org/r/20231109075147.2779461-1-senozhatsky@chromium.org
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Acked-by: Joe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@canonical.com> (maintainer:CHECKPATCH)
Cc: Dwaipayan Ray <dwaipayanray1@gmail.com> (reviewer:CHECKPATCH)
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Now compilers can recognize fatal() never returns.
While GCC 4.5 dropped support for -Wunreachable-code, Clang is capable
of detecting the unreachable code.
$ make HOSTCC=clang HOSTCFLAGS=-Wunreachable-code-return
[snip]
HOSTCC scripts/mod/modpost.o
scripts/mod/modpost.c:520:11: warning: 'return' will never be executed [-Wunreachable-code-return]
return 0;
^
scripts/mod/modpost.c:477:10: warning: 'return' will never be executed [-Wunreachable-code-return]
return 0;
^
2 warnings generated.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
This initializer was added to avoid -Wmaybe-uninitialized (gcc) and
-Wsometimes-uninitialized (clang) warnings.
Now that compilers recognize fatal() never returns, it is unneeded.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
The function fatal() never returns because modpost_log() calls exit(1)
when LOG_FATAL is passed.
Inform compilers of this fact so that unreachable code flow can be
identified at compile time.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
This attribute must be added to the function declaration in a header
for comprehensive checking of all the callsites.
Fixes: 6d9a89ea4b ("kbuild: declare the modpost error functions as printf like")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
When using the -dtbs syntax, you need to list the base first, as
follows:
foo-dtbs := foo_base.dtb foo_overlay1.dtbo foo_overlay2.dtbo
dtb-y := foo.dtb
You cannot do this arrangement:
foo-dtbs := foo_overlay1.dtbo foo_overlay2.dtbo foo_base.dtb
This restriction comes from $(firstword ...) in the current
implementation, but it is unneeded to rely on the order in the
-dtbs syntax.
Instead, you can simply determine the base by the suffix because
the base (*.dtb) and overlays (*.dtbo) use different suffixes.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
In 2017, the dpkg suite introduced the rootless builds support with the
following commits:
- 2436807c87b0 ("dpkg-deb: Add support for rootless builds")
- fca1bfe84068 ("dpkg-buildpackage: Add support for rootless builds")
This feature is available in the default dpkg on Debian 10 and Ubuntu
20.04.
Remove the old method.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The remainder address post-6.6 issues or aren't considered serious enough
to justify backporting.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZXKEfwAKCRDdBJ7gKXxA
jlRpAQCiAp1nSqIz/fOKTzoQRaTDXU/m+C+6ZAXdKLDfvQBhpwEAnxxjZ8IgF+8Z
Klz/GirHX5w5o7jE2wb8iObo1nR75Qo=
=omRq
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2023-12-07-18-47' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"31 hotfixes. Ten of these address pre-6.6 issues and are marked
cc:stable. The remainder address post-6.6 issues or aren't considered
serious enough to justify backporting"
* tag 'mm-hotfixes-stable-2023-12-07-18-47' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (31 commits)
mm/madvise: add cond_resched() in madvise_cold_or_pageout_pte_range()
nilfs2: prevent WARNING in nilfs_sufile_set_segment_usage()
mm/hugetlb: have CONFIG_HUGETLB_PAGE select CONFIG_XARRAY_MULTI
scripts/gdb: fix lx-device-list-bus and lx-device-list-class
MAINTAINERS: drop Antti Palosaari
highmem: fix a memory copy problem in memcpy_from_folio
nilfs2: fix missing error check for sb_set_blocksize call
kernel/Kconfig.kexec: drop select of KEXEC for CRASH_DUMP
units: add missing header
drivers/base/cpu: crash data showing should depends on KEXEC_CORE
mm/damon/sysfs-schemes: add timeout for update_schemes_tried_regions
scripts/gdb/tasks: fix lx-ps command error
mm/Kconfig: make userfaultfd a menuconfig
selftests/mm: prevent duplicate runs caused by TEST_GEN_PROGS
mm/damon/core: copy nr_accesses when splitting region
lib/group_cpus.c: avoid acquiring cpu hotplug lock in group_cpus_evenly
checkstack: fix printed address
mm/memory_hotplug: fix error handling in add_memory_resource()
mm/memory_hotplug: add missing mem_hotplug_lock
.mailmap: add a new address mapping for Chester Lin
...
Add some warnings for using ethtool_sprintf() where a simple
ethtool_puts() would suffice.
The two cases are:
1) Use ethtool_sprintf() with just two arguments:
| ethtool_sprintf(&data, driver[i].name);
or
2) Use ethtool_sprintf() with a standalone "%s" fmt string:
| ethtool_sprintf(&data, "%s", driver[i].name);
The former may cause -Wformat-security warnings while the latter is just
not preferred. Both are safely in the category of warnings, not errors.
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Fix dt-extract-compatibles for builds with in tree build directory
- Drop Xinlei Lee <xinlei.lee@mediatek.com> bouncing email
- Fix the of_reconfig_get_state_change() return value documentation
- Add missing #power-domain-cells property to QCom MPM
- Fix warnings in i.MX LCDIF and adi,adv7533
-----BEGIN PGP SIGNATURE-----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=+lyN
-----END PGP SIGNATURE-----
Merge tag 'devicetree-fixes-for-6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Fix dt-extract-compatibles for builds with in tree build directory
- Drop Xinlei Lee <xinlei.lee@mediatek.com> bouncing email
- Fix the of_reconfig_get_state_change() return value documentation
- Add missing #power-domain-cells property to QCom MPM
- Fix warnings in i.MX LCDIF and adi,adv7533
* tag 'devicetree-fixes-for-6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: display: adi,adv75xx: Document #sound-dai-cells
dt-bindings: lcdif: Properly describe the i.MX23 interrupts
dt-bindings: interrupt-controller: Allow #power-domain-cells
of: dynamic: Fix of_reconfig_get_state_change() return value documentation
dt-bindings: display: mediatek: dsi: remove Xinlei's mail
dt: dt-extract-compatibles: Don't follow symlinks when walking tree
After the conversion to bus_to_subsys() and class_to_subsys(), the gdb
scripts listing the system buses and classes respectively was broken, fix
those by returning the subsys_priv pointer and have the various caller
de-reference either the 'bus' or 'class' structure members accordingly.
Link: https://lkml.kernel.org/r/20231130043317.174188-1-florian.fainelli@broadcom.com
Fixes: 7b884b7f24 ("driver core: class.c: convert to only use class_to_subsys")
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Since commit 8e1f385104 ("kill task_struct->thread_group") remove
the thread_group, we will encounter below issue.
(gdb) lx-ps
TASK PID COMM
0xffff800086503340 0 swapper/0
Python Exception <class 'gdb.error'>: There is no member named thread_group.
Error occurred in Python: There is no member named thread_group.
We use signal->thread_head to iterate all threads instead.
[Kuan-Ying.Lee@mediatek.com: v2]
Link: https://lkml.kernel.org/r/20231129065142.13375-2-Kuan-Ying.Lee@mediatek.com
Link: https://lkml.kernel.org/r/20231127070404.4192-2-Kuan-Ying.Lee@mediatek.com
Fixes: 8e1f385104 ("kill task_struct->thread_group")
Signed-off-by: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Chinwen Chang <chinwen.chang@mediatek.com>
Cc: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Qun-Wei Lin <qun-wei.lin@mediatek.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
All addresses printed by checkstack have an extra incorrect 0 appended at
the end.
This was introduced with commit 677f1410e0 ("scripts/checkstack.pl: don't
display $dre as different entity"): since then the address is taken from
the line which contains the function name, instead of the line which
contains stack consumption. E.g. on s390:
0000000000100a30 <do_one_initcall>:
...
100a44: e3 f0 ff 70 ff 71 lay %r15,-144(%r15)
So the used regex which matches spaces and hexadecimal numbers to extract
an address now matches a different substring. Subsequently replacing spaces
with 0 appends a zero at the and, instead of replacing leading spaces.
Fix this by using the proper regex, and simplify the code a bit.
Link: https://lkml.kernel.org/r/20231120183719.2188479-2-hca@linux.ibm.com
Fixes: 677f1410e0 ("scripts/checkstack.pl: don't display $dre as different entity")
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Cc: Maninder Singh <maninder1.s@samsung.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Vaneet Narang <v.narang@samsung.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When a default property is missing in an int or hex symbol, it defaults
to an empty string, which is not a valid symbol value.
It results in an incorrect .config, and can also lead to an infinite
loop in scripting.
Use "0" for int and "0x0" for hex as a default value.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Yoann Congal <yoann.congal@smile.fr>
This is used only for initializing other variables.
Use the empty string "" directly.
Please note newval.tri is unused for S_INT/HEX/STRING.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
A little more janitorial work after commit cf8e865810 ("arch: Remove
Itanium (IA-64) architecture").
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
KCONFIG_WARN_UNKNOWN_SYMBOLS=1 and KCONFIG_WERROR=1 are descriptive
and suitable in scripting, but typing them from the command line can
be tedious.
Associate them with KBUILD_EXTRA_WARN (and the W= shorthand).
Support a new letter 'c' to enable extra checks in Kconfig. You can
still manage compiler warnings (W=1) and Kconfig warnings (W=c)
independently.
Reuse the letter 'e' to turn Kconfig warnings into errors.
As usual, you can combine multiple letters in KCONFIG_EXTRA_WARN.
$ KCONFIG_WARN_UNKNOWN_SYMBOLS=1 KCONFIG_WERROR=1 make defconfig
can be shortened to:
$ KBUILD_EXTRA_WARN=ce make defconfig
or, even shorter:
$ make W=ce defconfig
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Set up build time warnings to safeguard against future header changes of
organized structs.
Warning includes:
1) whether all variables are still in the same cache group
2) whether all the cache groups have the sum of the members size (in the
maximum condition, including all members defined in configs)
The __cache_group* variables are ignored in kernel-doc check in the
various header files they appear in to enforce the cache groups.
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Coco Li <lixiaoyan@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The rpm-pkg and deb-pkg targets have transitioned to using 'git archive'
for tarball creation.
Although the old cmd_src_tar is still used by snap-pkg, there is no need
to pack and unpack a tarball solely for passing the source to snapcraft.
Instead, you can use 'source-type: local' to tell the source location to
snapcraft.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
It is done for the same reasons as 4243afdb93 does it for builddeb:
always runs make modules to install modules.builtin* files, which are
needed for e.g. initramfs-tools or LTP testing tool.
Signed-off-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The shell variable $dirs is not used any more since 1fc9095846
("kbuild: tar-pkg: use tar rules in scripts/Makefile.package"),
therefore remove it".
Fixes: 1fc9095846 ("kbuild: tar-pkg: use tar rules in scripts/Makefile.package")
Signed-off-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Make the while-loop code a little more readable.
The gain is that "CONFIG_FOO" without '=' is warned as unexpected data.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Currently, any string starting "is not set" disables a CONFIG option.
For example, "# CONFIG_FOO is not settled down" is accepted as valid
input, functioning the same as "# CONFIG_FOO is not set". It is a
long-standing oddity.
Check the line against the exact pattern "is not set".
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Currently, newline characters are stripped away in multiple places
on the caller.
Doing that in the callee is helpful for further cleanups.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Kconfig accepts both "# CONFIG_FOO is not set" and "CONFIG_FOO=n" as
a valid input, but conf_read_simple() duplicates similar code to handle
them. Factor out the common code.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The 'else' arm here is unreachable in practical use cases.
include/config/auto.conf does not include "# CONFIG_... is not set"
line unless it is manually hacked.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Currently, when an input line starts with '#', (line + 2) is passed to
memcmp() without checking line[1].
It means that line[1] can be any arbitrary character. For example,
"#KCONFIG_FOO is not set" is accepted as valid input, functioning the
same as "# CONFIG_FOO is not set".
More importantly, this can potentially lead to a buffer overrun if
line[1] == '\0'. It occurs if the input only contains '#', as
(line + 2) points to an uninitialized buffer.
Check line[1], and skip the line if it is not a space.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
xrealloc() never returns NULL as it is checked in the callee.
This is a left-over of commit d717f24d8c ("kconfig: add xrealloc()
helper").
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The long version --rules-file and --jobs are available since 1.18.8
while their short analogues -R and -j have been added since 1.14.7.
The option --rules-file the way it works currently was introduced in the
commit 5cd52673aabdf5eaa58181972119a41041fc85f2 of dpkg dated 23.07.18
with the following changelog entry:
* Fix dpkg-buildpackage option --rules-file parsing. It was trying to parse
it as --rules-target, which due to the ordering was a no-op.
The current behavior of the long version --rules-file is guaranteed to
be in use starting 1.19.1 and might cause build failures for some
versions newer than 1.18.8 even in spite of being documented that way.
Signed-off-by: Dmitrii Bundin <dmitrii.bundin.a@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
When a user-supplied value is out of range, (NEW) and an incorrect default
value are shown.
[Test Kconfig]
config FOO
int "foo"
range 10 20
[Test .config]
CONFIG_FOO=30
[Result without this fix]
$ make config
*
* Main menu
*
foo (FOO) [10] (NEW)
[Result with this fix]
$ make config
*
* Main menu
*
foo (FOO) [20]
Currently, the SYMBOL_DEF_USER is cleared if the user input does not
reside within the range. Kconfig forgets the initial value 30, and
prints (NEW) and an incorrect default [10].
Kconfig should remember the user's input. The default should be [20]
because the user's input, 30, is closer to the upper limit of the range.
Please note it will not show up in "make oldconfig" because it is no
longer considered as a new symbol. It also fixes the inconsistent
behavior in listnewconfig/helpnewconfig.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
getopt_long() is used by various tools in the kernel (e.g. Kconfig).
It should be fine to use it all the time.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Commit 74d9317161 ("genksyms: remove symbol prefix support") removed
the -s (--symbol-prefix) option.
Clean up the left-over.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Update code comment to clarify that the only element whose layout is
not randomized is a proper C99 flexible-array member. This update is
complementary to commit 1ee60356c2 ("gcc-plugins: randstruct: Only
warn about true flexible arrays")
Signed-off-by: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/ZWJr2MWDjXLHE8ap@work
Fixes: 1ee60356c2 ("gcc-plugins: randstruct: Only warn about true flexible arrays")
Signed-off-by: Kees Cook <keescook@chromium.org>
uapi headers should not expose CONFIG switches since they are not
available in userspace. Fix it in arch/hexagon/include/uapi/asm/user.h
by always defining the cs0 and cs1 entries instead of pad values.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
For some unknown reason the regular expression for checkstack only matches
three digit numbers starting with the number "3", or any higher
number. Which means that it skips any stack sizes smaller than 304
bytes. This makes the checkstack script a bit less useful than it could be.
Change the script to match any number. To be filtered out stack sizes
can be configured with the min_stack variable, which omits any stack
frame sizes smaller than 100 bytes by default.
Tested-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
- Fix section mismatch warning messages for riscv and loongarch
- Remove CONFIG_IA64 left-over from linux/export-internal.h
- Fix the location of the quotes for UIMAGE_NAME
- Fix a memory leak bug in Kconfig
-----BEGIN PGP SIGNATURE-----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=cAfu
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix section mismatch warning messages for riscv and loongarch
- Remove CONFIG_IA64 left-over from linux/export-internal.h
- Fix the location of the quotes for UIMAGE_NAME
- Fix a memory leak bug in Kconfig
* tag 'kbuild-fixes-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: fix memory leak from range properties
kbuild: Move the single quotes for image name
linux/export: clean up the IA-64 KSYM_FUNC macro
modpost: fix section mismatch message for RELA
Currently, sym_validate_range() duplicates the range string using
xstrdup(), which is overwritten by a subsequent sym_calc_value() call.
It results in a memory leak.
Instead, only the pointer should be copied.
Below is a test case, with a summary from Valgrind.
[Test Kconfig]
config FOO
int "foo"
range 10 20
[Test .config]
CONFIG_FOO=0
[Before]
LEAK SUMMARY:
definitely lost: 3 bytes in 1 blocks
indirectly lost: 0 bytes in 0 blocks
possibly lost: 0 bytes in 0 blocks
still reachable: 17,465 bytes in 21 blocks
suppressed: 0 bytes in 0 blocks
[After]
LEAK SUMMARY:
definitely lost: 0 bytes in 0 blocks
indirectly lost: 0 bytes in 0 blocks
possibly lost: 0 bytes in 0 blocks
still reachable: 17,462 bytes in 20 blocks
suppressed: 0 bytes in 0 blocks
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Add quotes where UIMAGE_NAME is used, rather than where it is defined.
This allows the UIMAGE_NAME variable to be set by the user.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The section mismatch check prints a bogus symbol name on some
architectures.
[test code]
#include <linux/init.h>
int __initdata foo;
int get_foo(void) { return foo; }
If you compile it with GCC for riscv or loongarch, modpost will show an
incorrect symbol name:
WARNING: modpost: vmlinux: section mismatch in reference: get_foo+0x8 (section: .text) -> done (section: .init.data)
To get the correct symbol address, the st_value must be added.
This issue has never been noticed since commit 93684d3b80 ("kbuild:
include symbol names in section mismatch warnings") presumably because
st_value becomes zero on most architectures when the referenced symbol
is looked up. It is not true for riscv or loongarch, at least.
With this fix, modpost will show the correct symbol name:
WARNING: modpost: vmlinux: section mismatch in reference: get_foo+0x8 (section: .text) -> foo (section: .init.data)
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
The iglob function, which we use to find C source files in the kernel
tree, always follows symbolic links. This can cause unintentional
recursions whenever a symbolic link points to a parent directory. A
common scenario is building the kernel with the output set to a
directory inside the kernel tree, which will contain such a symlink.
Instead of using the iglob function, use os.walk to traverse the
directory tree, which by default doesn't follow symbolic links. fnmatch
is then used to match the glob on the filename, as well as ignore hidden
files (which were ignored by default with iglob).
This approach runs just as fast as using iglob.
Fixes: b6acf80735 ("dt: Add a check for undocumented compatible strings in kernel")
Reported-by: Aishwarya TCV <aishwarya.tcv@arm.com>
Closes: https://lore.kernel.org/all/e90cb52f-d55b-d3ba-3933-6cc7b43fcfbc@arm.com
Signed-off-by: "Nícolas F. R. A. Prado" <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20231107225624.9811-1-nfraprado@collabora.com
Signed-off-by: Rob Herring <robh@kernel.org>
The randstruct GCC plugin tried to discover "fake" flexible arrays
to issue warnings about them in randomized structs. In the future
LSM overhead reduction series, it would be legal to have a randomized
struct with a 1-element array, and this should _not_ be treated as a
flexible array, especially since commit df8fc4e934 ("kbuild: Enable
-fstrict-flex-arrays=3"). Disable the 0-sized and 1-element array
discovery logic in the plugin, but keep the "true" flexible array check.
Cc: KP Singh <kpsingh@kernel.org>
Cc: linux-hardening@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311021532.iBwuZUZ0-lkp@intel.com/
Fixes: df8fc4e934 ("kbuild: Enable -fstrict-flex-arrays=3")
Reviewed-by: Bill Wendling <morbo@google.com>
Acked-by: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20231104204334.work.160-kees@kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
- Implement the binary search in modpost for faster symbol lookup
- Respect HOSTCC when linking host programs written in Rust
- Change the binrpm-pkg target to generate kernel-devel RPM package
- Fix endianness issues for tee and ishtp MODULE_DEVICE_TABLE
- Unify vdso_install rules
- Remove unused __memexit* annotations
- Eliminate stale whitelisting for __devinit/__devexit from modpost
- Enable dummy-tools to handle the -fpatchable-function-entry flag
- Add 'userldlibs' syntax
-----BEGIN PGP SIGNATURE-----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=PeX7
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Implement the binary search in modpost for faster symbol lookup
- Respect HOSTCC when linking host programs written in Rust
- Change the binrpm-pkg target to generate kernel-devel RPM package
- Fix endianness issues for tee and ishtp MODULE_DEVICE_TABLE
- Unify vdso_install rules
- Remove unused __memexit* annotations
- Eliminate stale whitelisting for __devinit/__devexit from modpost
- Enable dummy-tools to handle the -fpatchable-function-entry flag
- Add 'userldlibs' syntax
* tag 'kbuild-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (30 commits)
kbuild: support 'userldlibs' syntax
kbuild: dummy-tools: pretend we understand -fpatchable-function-entry
kbuild: Correct missing architecture-specific hyphens
modpost: squash ALL_{INIT,EXIT}_TEXT_SECTIONS to ALL_TEXT_SECTIONS
modpost: merge sectioncheck table entries regarding init/exit sections
modpost: use ALL_INIT_SECTIONS for the section check from DATA_SECTIONS
modpost: disallow the combination of EXPORT_SYMBOL and __meminit*
modpost: remove EXIT_SECTIONS macro
modpost: remove MEM_INIT_SECTIONS macro
modpost: remove more symbol patterns from the section check whitelist
modpost: disallow *driver to reference .meminit* sections
linux/init: remove __memexit* annotations
modpost: remove ALL_EXIT_DATA_SECTIONS macro
kbuild: simplify cmd_ld_multi_m
kbuild: avoid too many execution of scripts/pahole-flags.sh
kbuild: remove ARCH_POSTLINK from module builds
kbuild: unify no-compiler-targets and no-sync-config-targets
kbuild: unify vdso_install rules
docs: kbuild: add INSTALL_DTBS_PATH
UML: remove unused cmd_vdso_install
...
Here is the big set of staging driver updates for 6.7-rc1. A bit bigger
than 6.6 this time around, as it coincided with the Outreachy and
mentorship application process, so we got a bunch of new developers
sending in their first changes, which is nice to see.
Also in here is a removal of the qlge ethernet driver, and the rtl8192u
wireless driver. Both of these were very old and no one was maintaining
them, the wireless driver removal was due to no one using it anymore,
and no hardware to be found, and is part of a larger effort to remove
unused and old wifi drivers from the system.
The qlge ethernet driver did have one user pop up after it was dropped,
and we are working with the network mainainers to figure out what tree
it will come back in from and who will be responsible for it, and if it
really is being used or not. Odds are it will show up in a network
subsystem pull request after -rc1 is out, but we aren't sure yet.
Other smaller changes in here are:
- Lots of vc04_services work by Umang to clean up the mess created by
the rpi developers long ago, bringing it almost into good enough
shape to get out of staging, hopefully next major release, it's
getting close.
- rtl8192e variable cleanups and removal of unused code and structures
- vme_user coding style cleanups
- other small coding style cleanups to lots of the staging drivers
- octeon typedef removals, and then last-minute revert when it was
found to break the build in some configurations (it's a hard driver
to build properly, none of the normal automated testing catches it.)
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZUTg9w8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymL+QCg2YS9Mbr7W6zNAdRTbDybzp08ZzUAnRHQXUfB
WbZERHQpNOSTE3HwuW1D
=tZpl
-----END PGP SIGNATURE-----
Merge tag 'staging-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver updates from Greg KH:
"Here is the big set of staging driver updates for 6.7-rc1. A bit
bigger than 6.6 this time around, as it coincided with the Outreachy
and mentorship application process, so we got a bunch of new
developers sending in their first changes, which is nice to see.
Also in here is a removal of the qlge ethernet driver, and the
rtl8192u wireless driver. Both of these were very old and no one was
maintaining them, the wireless driver removal was due to no one using
it anymore, and no hardware to be found, and is part of a larger
effort to remove unused and old wifi drivers from the system.
The qlge ethernet driver did have one user pop up after it was
dropped, and we are working with the network mainainers to figure out
what tree it will come back in from and who will be responsible for
it, and if it really is being used or not. Odds are it will show up in
a network subsystem pull request after -rc1 is out, but we aren't sure
yet.
Other smaller changes in here are:
- Lots of vc04_services work by Umang to clean up the mess created by
the rpi developers long ago, bringing it almost into good enough
shape to get out of staging, hopefully next major release, it's
getting close.
- rtl8192e variable cleanups and removal of unused code and
structures
- vme_user coding style cleanups
- other small coding style cleanups to lots of the staging drivers
- octeon typedef removals, and then last-minute revert when it was
found to break the build in some configurations (it's a hard driver
to build properly, none of the normal automated testing catches
it.)
All of these have been in linux-next for a while with no reported
issues"
* tag 'staging-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (256 commits)
Revert "staging: octeon: remove typedef in enum cvmx_spi_mode_t"
Revert "staging: octeon: remove typedef in enum cvmx_helper_interface_mode_t"
Revert "staging: octeon: remove typedef in enum cvmx_pow_wait_t"
Revert "staging: octeon: remove typedef in struct cvmx_pko_lock_t"
Revert "staging: octeon: remove typedef in enum cvmx_pko_status_t"
Revert "staging: octeon: remove typedef in structs cvmx_pip_port_status_t and cvmx_pko_port_status_t"
staging: vt6655: Type encoding info dropped from variable name "byRxRate"
staging: vt6655: Type encoding info dropped from function name "CARDbUpdateTSF"
staging: vt6655: Type encoding info dropped from function name "CARDvSetRSPINF"
staging: vt6655: Type encoding info dropped from function name "CARDbyGetPktType"
staging: vt6655: Type encoding info dropped from variable name "byPacketType"
staging: vt6655: Type encoding info dropped from function name "CARDbSetPhyParameter"
staging: vt6655: Type encoding info dropped from variable name "pbyRsvTime"
staging: vt6655: Type encoding info dropped from variable name "pbyTxRate"
staging: vt6655: Type encoding info dropped from function name "s_vCalculateOFDMRParameter"
staging: vt6655: Type encoding info dropped from array name "cwRXBCNTSFOff"
staging: fbtft: Convert to platform remove callback returning void
staging: olpc_dcon: Remove I2C_CLASS_DDC support
staging: vc04_services: use snprintf instead of sprintf
staging: rtl8192e: Fix line break issue at priv->rx_buf[priv->rx_idx]
...
Here is the big set of char/misc and other small driver subsystem
changes for 6.7-rc1. Included in here are:
- IIO subsystem driver updates and additions (largest part of this
pull request)
- FPGA subsystem driver updates
- Counter subsystem driver updates
- ICC subsystem driver updates
- extcon subsystem driver updates
- mei driver updates and additions
- nvmem subsystem driver updates and additions
- comedi subsystem dependency fixes
- parport driver fixups
- cdx subsystem driver and core updates
- splice support for /dev/zero and /dev/full
- other smaller driver cleanups
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZUTSzg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylH3QCfbZuG8MiglEZUd4slRLUNqcRQ5tQAn1yKpDFo
l3KLkxo1UTLMXbJBWe+b
=gafK
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc updates from Greg KH:
"Here is the big set of char/misc and other small driver subsystem
changes for 6.7-rc1. Included in here are:
- IIO subsystem driver updates and additions (largest part of this
pull request)
- FPGA subsystem driver updates
- Counter subsystem driver updates
- ICC subsystem driver updates
- extcon subsystem driver updates
- mei driver updates and additions
- nvmem subsystem driver updates and additions
- comedi subsystem dependency fixes
- parport driver fixups
- cdx subsystem driver and core updates
- splice support for /dev/zero and /dev/full
- other smaller driver cleanups
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (326 commits)
cdx: add sysfs for subsystem, class and revision
cdx: add sysfs for bus reset
cdx: add support for bus enable and disable
cdx: Register cdx bus as a device on cdx subsystem
cdx: Create symbol namespaces for cdx subsystem
cdx: Introduce lock to protect controller ops
cdx: Remove cdx controller list from cdx bus system
dts: ti: k3-am625-beagleplay: Add beaglecc1352
greybus: Add BeaglePlay Linux Driver
dt-bindings: net: Add ti,cc1352p7
dt-bindings: eeprom: at24: allow NVMEM cells based on old syntax
dt-bindings: nvmem: SID: allow NVMEM cells based on old syntax
Revert "nvmem: add new config option"
MAINTAINERS: coresight: Add missing Coresight files
misc: pci_endpoint_test: Add deviceID for J721S2 PCIe EP device support
firmware: xilinx: Move EXPORT_SYMBOL_GPL next to zynqmp_pm_feature definition
uacce: make uacce_class constant
ocxl: make ocxl_class constant
cxl: make cxl_class constant
misc: phantom: make phantom_class constant
...
Build
-----
* Compile BPF programs by default if clang (>= 12.0.1) is available to
enable more features like kernel lock contention, off-cpu profiling,
kwork, sample filtering and so on. It can be disabled by passing
BUILD_BPF_SKEL=0 to make.
* Produce better error messages for bison on debug build (make DEBUG=1)
by defining YYDEBUG symbol internally.
perf record
-----------
* Track sideband events (like FORK/MMAP) from all CPUs even if perf record
targets a subset of CPUs only (using -C option). Otherwise it may lose
some information happened on a CPU out of the target list.
* Fix checking raw sched_switch tracepoint argument using system BTF.
This affects off-cpu profiling which attaches a BPF program to the raw
tracepoint.
perf lock contention
--------------------
* Add --lock-cgroup option to see contention by cgroups. This should be
used with BPF only (using -b option).
$ sudo perf lock con -ab --lock-cgroup -- sleep 1
contended total wait max wait avg wait cgroup
835 14.06 ms 41.19 us 16.83 us /system.slice/led.service
25 122.38 us 13.77 us 4.89 us /
44 23.73 us 3.87 us 539 ns /user.slice/user-657345.slice/session-c4.scope
1 491 ns 491 ns 491 ns /system.slice/connectd.service
* Add -G/--cgroup-filter option to see contention only for given cgroups.
This can be useful when you identified a cgroup in the above command and
want to investigate more on it. It also works with other output options
like -t/--threads and -l/--lock-addr.
$ sudo perf lock con -ab -G /user.slice/user-657345.slice/session-c4.scope -- sleep 1
contended total wait max wait avg wait type caller
8 77.11 us 17.98 us 9.64 us spinlock futex_wake+0xc8
2 24.56 us 14.66 us 12.28 us spinlock tick_do_update_jiffies64+0x25
1 4.97 us 4.97 us 4.97 us spinlock futex_q_lock+0x2a
* Use per-cpu array for better spinlock tracking. This is to improve
performance of the BPF program and to avoid nested contention on a lock
in the BPF hash map.
* Update callstack check for PowerPC. To find a representative caller of a
lock, it needs to look up the call stacks. It ends the lookup when it sees
0 in the call stack buffer. However, PowerPC call stacks can have 0 values
in the beginning so skip them when it expects valid call stacks after.
perf kwork
----------
* Support 'sched' class (for -k option) so that it can see task scheduling
event (using sched_switch tracepoint) as well as irq and workqueue items.
* Add perf kwork top subcommand to show more accurate cpu utilization with
sched class above. It works both with a recorded data (using perf kwork
record command) and BPF (using -b option). Unlike perf top command, it
does not support interactive mode (yet).
$ sudo perf kwork top -b -k sched
Starting trace, Hit <Ctrl+C> to stop and report
^C
Total : 160702.425 ms, 8 cpus
%Cpu(s): 36.00% id, 0.00% hi, 0.00% si
%Cpu0 [|||||||||||||||||| 61.66%]
%Cpu1 [|||||||||||||||||| 61.27%]
%Cpu2 [||||||||||||||||||| 66.40%]
%Cpu3 [|||||||||||||||||| 61.28%]
%Cpu4 [|||||||||||||||||| 61.82%]
%Cpu5 [||||||||||||||||||||||| 77.41%]
%Cpu6 [|||||||||||||||||| 61.73%]
%Cpu7 [|||||||||||||||||| 63.25%]
PID SPID %CPU RUNTIME COMMMAND
-------------------------------------------------------------
0 0 38.72 8089.463 ms [swapper/1]
0 0 38.71 8084.547 ms [swapper/3]
0 0 38.33 8007.532 ms [swapper/0]
0 0 38.26 7992.985 ms [swapper/6]
0 0 38.17 7971.865 ms [swapper/4]
0 0 36.74 7447.765 ms [swapper/7]
0 0 33.59 6486.942 ms [swapper/2]
0 0 22.58 3771.268 ms [swapper/5]
9545 9351 2.48 447.136 ms sched-messaging
9574 9351 2.09 418.583 ms sched-messaging
9724 9351 2.05 372.407 ms sched-messaging
9531 9351 2.01 368.804 ms sched-messaging
9512 9351 2.00 362.250 ms sched-messaging
9514 9351 1.95 357.767 ms sched-messaging
9538 9351 1.86 384.476 ms sched-messaging
9712 9351 1.84 386.490 ms sched-messaging
9723 9351 1.83 380.021 ms sched-messaging
9722 9351 1.82 382.738 ms sched-messaging
9517 9351 1.81 354.794 ms sched-messaging
9559 9351 1.79 344.305 ms sched-messaging
9725 9351 1.77 365.315 ms sched-messaging
<SNIP>
* Add hard/soft-irq statistics to perf kwork top. This will show the
total CPU utilization with IRQ stats like below:
$ sudo perf kwork top -b -k sched,irq,softirq
Starting trace, Hit <Ctrl+C> to stop and report
^C
Total : 12554.889 ms, 8 cpus
%Cpu(s): 96.23% id, 0.10% hi, 0.19% si <---- here
%Cpu0 [| 4.60%]
%Cpu1 [| 4.59%]
%Cpu2 [ 2.73%]
%Cpu3 [| 3.81%]
<SNIP>
perf bench
----------
* Add -G/--cgroups option to perf bench sched pipe. The pipe bench is
good to measure context switch overhead. With this option, it puts
the reader and writer tasks in separate cgroups to enforce context
switch between two different cgroups.
Also it needs to set CPU affinity of the tasks in a CPU to accurately
measure the impact of cgroup context switches.
$ sudo perf stat -e context-switches,cgroup-switches -- \
> taskset -c 0 perf bench sched pipe -l 100000
# Running 'sched/pipe' benchmark:
# Executed 100000 pipe operations between two processes
Total time: 0.307 [sec]
3.078180 usecs/op
324867 ops/sec
Performance counter stats for 'taskset -c 0 perf bench sched pipe -l 100000':
200,026 context-switches
63 cgroup-switches
0.321637922 seconds time elapsed
You can see small number of cgroup-switches because both write and read
tasks are in the same cgroup.
$ sudo mkdir /sys/fs/cgroup/{AAA,BBB}
$ sudo perf stat -e context-switches,cgroup-switches -- \
> taskset -c 0 perf bench sched pipe -l 100000 -G AAA,BBB
# Running 'sched/pipe' benchmark:
# Executed 100000 pipe operations between two processes
Total time: 0.351 [sec]
3.512990 usecs/op
284657 ops/sec
Performance counter stats for 'taskset -c 0 perf bench sched pipe -l 100000 -G AAA,BBB':
200,020 context-switches
200,019 cgroup-switches
0.365034567 seconds time elapsed
Now context-switches and cgroup-switches are almost same. And you can
see the pipe operation took little more.
* Kill child processes when perf bench sched messaging exited abnormally.
Otherwise it'd leave the child doing unnecessary work.
perf test
---------
* Fix various shellcheck issues on the tests written in shell script.
* Skip tests when condition is not satisfied:
- object code reading test for non-text section addresses.
- CoreSight test if cs_etm// event is not available.
- lock contention test if not enough CPUs.
Event parsing
-------------
* Make PMU alias name loading lazy to reduce the startup time in the
event parsing code for perf record, stat and others in the general
case.
* Lazily compute PMU default config. In the same sense, delay PMU
initialization until it's really needed to reduce the startup cost.
* Fix event term values that are raw events. The event specification
can have several terms including event name. But sometimes it clashes
with raw event encoding which starts with 'r' and has hex-digits.
For example, an event named 'read' should be processed as a normal
event but it was mis-treated as a raw encoding and caused a failure.
$ perf stat -e 'uncore_imc_free_running/event=read/' -a sleep 1
event syntax error: '..nning/event=read/'
\___ parser error
Run 'perf list' for a list of valid events
Usage: perf stat [<options>] [<command>]
-e, --event <event> event selector. use 'perf list' to list available events
Event metrics
-------------
* Add "Compat" regex to match event with multiple identifiers.
* Usual updates for Intel, Power10, Arm telemetry/CMN and AmpereOne.
Misc
----
* Assorted memory leak fixes and footprint reduction.
* Add "bpf_skeletons" to perf version --build-options so that users can
check whether their perf tools have BPF support easily.
* Fix unaligned access in Intel-PT packet decoder found by undefined-behavior
sanitizer.
* Avoid frequency mode for the dummy event. Surprisingly it'd impact
kernel timer tick handler performance by force iterating all PMU events.
* Update bash shell completion for events and metrics.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSo2x5BnqMqsoHtzsmMstVUGiXMgwUCZUMg7wAKCRCMstVUGiXM
g8FvAQC9KED6H8rlH7UTvxE6fM947EJbldwGrNA1zGx++Ucd3gD/ewA2A6SUcIh6
Tua/XovmYOQbuDYOwlRHe+sdDag0sgg=
=GrCE
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-for-v6.7-1-2023-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools updates from Namhyung Kim:
"Build:
- Compile BPF programs by default if clang (>= 12.0.1) is available
to enable more features like kernel lock contention, off-cpu
profiling, kwork, sample filtering and so on.
This can be disabled by passing BUILD_BPF_SKEL=0 to make.
- Produce better error messages for bison on debug build (make
DEBUG=1) by defining YYDEBUG symbol internally.
perf record:
- Track sideband events (like FORK/MMAP) from all CPUs even if perf
record targets a subset of CPUs only (using -C option). Otherwise
it may lose some information happened on a CPU out of the target
list.
- Fix checking raw sched_switch tracepoint argument using system BTF.
This affects off-cpu profiling which attaches a BPF program to the
raw tracepoint.
perf lock contention:
- Add --lock-cgroup option to see contention by cgroups. This should
be used with BPF only (using -b option).
$ sudo perf lock con -ab --lock-cgroup -- sleep 1
contended total wait max wait avg wait cgroup
835 14.06 ms 41.19 us 16.83 us /system.slice/led.service
25 122.38 us 13.77 us 4.89 us /
44 23.73 us 3.87 us 539 ns /user.slice/user-657345.slice/session-c4.scope
1 491 ns 491 ns 491 ns /system.slice/connectd.service
- Add -G/--cgroup-filter option to see contention only for given
cgroups.
This can be useful when you identified a cgroup in the above
command and want to investigate more on it. It also works with
other output options like -t/--threads and -l/--lock-addr.
$ sudo perf lock con -ab -G /user.slice/user-657345.slice/session-c4.scope -- sleep 1
contended total wait max wait avg wait type caller
8 77.11 us 17.98 us 9.64 us spinlock futex_wake+0xc8
2 24.56 us 14.66 us 12.28 us spinlock tick_do_update_jiffies64+0x25
1 4.97 us 4.97 us 4.97 us spinlock futex_q_lock+0x2a
- Use per-cpu array for better spinlock tracking. This is to improve
performance of the BPF program and to avoid nested contention on a
lock in the BPF hash map.
- Update callstack check for PowerPC. To find a representative caller
of a lock, it needs to look up the call stacks. It ends the lookup
when it sees 0 in the call stack buffer. However, PowerPC call
stacks can have 0 values in the beginning so skip them when it
expects valid call stacks after.
perf kwork:
- Support 'sched' class (for -k option) so that it can see task
scheduling event (using sched_switch tracepoint) as well as irq and
workqueue items.
- Add perf kwork top subcommand to show more accurate cpu utilization
with sched class above. It works both with a recorded data (using
perf kwork record command) and BPF (using -b option). Unlike perf
top command, it does not support interactive mode (yet).
$ sudo perf kwork top -b -k sched
Starting trace, Hit <Ctrl+C> to stop and report
^C
Total : 160702.425 ms, 8 cpus
%Cpu(s): 36.00% id, 0.00% hi, 0.00% si
%Cpu0 [|||||||||||||||||| 61.66%]
%Cpu1 [|||||||||||||||||| 61.27%]
%Cpu2 [||||||||||||||||||| 66.40%]
%Cpu3 [|||||||||||||||||| 61.28%]
%Cpu4 [|||||||||||||||||| 61.82%]
%Cpu5 [||||||||||||||||||||||| 77.41%]
%Cpu6 [|||||||||||||||||| 61.73%]
%Cpu7 [|||||||||||||||||| 63.25%]
PID SPID %CPU RUNTIME COMMMAND
-------------------------------------------------------------
0 0 38.72 8089.463 ms [swapper/1]
0 0 38.71 8084.547 ms [swapper/3]
0 0 38.33 8007.532 ms [swapper/0]
0 0 38.26 7992.985 ms [swapper/6]
0 0 38.17 7971.865 ms [swapper/4]
0 0 36.74 7447.765 ms [swapper/7]
0 0 33.59 6486.942 ms [swapper/2]
0 0 22.58 3771.268 ms [swapper/5]
9545 9351 2.48 447.136 ms sched-messaging
9574 9351 2.09 418.583 ms sched-messaging
9724 9351 2.05 372.407 ms sched-messaging
9531 9351 2.01 368.804 ms sched-messaging
9512 9351 2.00 362.250 ms sched-messaging
9514 9351 1.95 357.767 ms sched-messaging
9538 9351 1.86 384.476 ms sched-messaging
9712 9351 1.84 386.490 ms sched-messaging
9723 9351 1.83 380.021 ms sched-messaging
9722 9351 1.82 382.738 ms sched-messaging
9517 9351 1.81 354.794 ms sched-messaging
9559 9351 1.79 344.305 ms sched-messaging
9725 9351 1.77 365.315 ms sched-messaging
<SNIP>
- Add hard/soft-irq statistics to perf kwork top. This will show the
total CPU utilization with IRQ stats like below:
$ sudo perf kwork top -b -k sched,irq,softirq
Starting trace, Hit <Ctrl+C> to stop and report
^C
Total : 12554.889 ms, 8 cpus
%Cpu(s): 96.23% id, 0.10% hi, 0.19% si <---- here
%Cpu0 [| 4.60%]
%Cpu1 [| 4.59%]
%Cpu2 [ 2.73%]
%Cpu3 [| 3.81%]
<SNIP>
perf bench:
- Add -G/--cgroups option to perf bench sched pipe. The pipe bench is
good to measure context switch overhead. With this option, it puts
the reader and writer tasks in separate cgroups to enforce context
switch between two different cgroups.
Also it needs to set CPU affinity of the tasks in a CPU to
accurately measure the impact of cgroup context switches.
$ sudo perf stat -e context-switches,cgroup-switches -- \
> taskset -c 0 perf bench sched pipe -l 100000
# Running 'sched/pipe' benchmark:
# Executed 100000 pipe operations between two processes
Total time: 0.307 [sec]
3.078180 usecs/op
324867 ops/sec
Performance counter stats for 'taskset -c 0 perf bench sched pipe -l 100000':
200,026 context-switches
63 cgroup-switches
0.321637922 seconds time elapsed
You can see small number of cgroup-switches because both write and
read tasks are in the same cgroup.
$ sudo mkdir /sys/fs/cgroup/{AAA,BBB}
$ sudo perf stat -e context-switches,cgroup-switches -- \
> taskset -c 0 perf bench sched pipe -l 100000 -G AAA,BBB
# Running 'sched/pipe' benchmark:
# Executed 100000 pipe operations between two processes
Total time: 0.351 [sec]
3.512990 usecs/op
284657 ops/sec
Performance counter stats for 'taskset -c 0 perf bench sched pipe -l 100000 -G AAA,BBB':
200,020 context-switches
200,019 cgroup-switches
0.365034567 seconds time elapsed
Now context-switches and cgroup-switches are almost same. And you
can see the pipe operation took little more.
- Kill child processes when perf bench sched messaging exited
abnormally. Otherwise it'd leave the child doing unnecessary work.
perf test:
- Fix various shellcheck issues on the tests written in shell script.
- Skip tests when condition is not satisfied:
- object code reading test for non-text section addresses.
- CoreSight test if cs_etm// event is not available.
- lock contention test if not enough CPUs.
Event parsing:
- Make PMU alias name loading lazy to reduce the startup time in the
event parsing code for perf record, stat and others in the general
case.
- Lazily compute PMU default config. In the same sense, delay PMU
initialization until it's really needed to reduce the startup cost.
- Fix event term values that are raw events. The event specification
can have several terms including event name. But sometimes it
clashes with raw event encoding which starts with 'r' and has
hex-digits.
For example, an event named 'read' should be processed as a normal
event but it was mis-treated as a raw encoding and caused a
failure.
$ perf stat -e 'uncore_imc_free_running/event=read/' -a sleep 1
event syntax error: '..nning/event=read/'
\___ parser error
Run 'perf list' for a list of valid events
Usage: perf stat [<options>] [<command>]
-e, --event <event> event selector. use 'perf list' to list available events
Event metrics:
- Add "Compat" regex to match event with multiple identifiers.
- Usual updates for Intel, Power10, Arm telemetry/CMN and AmpereOne.
Misc:
- Assorted memory leak fixes and footprint reduction.
- Add "bpf_skeletons" to perf version --build-options so that users
can check whether their perf tools have BPF support easily.
- Fix unaligned access in Intel-PT packet decoder found by
undefined-behavior sanitizer.
- Avoid frequency mode for the dummy event. Surprisingly it'd impact
kernel timer tick handler performance by force iterating all PMU
events.
- Update bash shell completion for events and metrics"
* tag 'perf-tools-for-v6.7-1-2023-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (187 commits)
perf vendor events intel: Update tsx_cycles_per_elision metrics
perf vendor events intel: Update bonnell version number to v5
perf vendor events intel: Update westmereex events to v4
perf vendor events intel: Update meteorlake events to v1.06
perf vendor events intel: Update knightslanding events to v16
perf vendor events intel: Add typo fix for ivybridge FP
perf vendor events intel: Update a spelling in haswell/haswellx
perf vendor events intel: Update emeraldrapids to v1.01
perf vendor events intel: Update alderlake/alderlake events to v1.23
perf build: Disable BPF skeletons if clang version is < 12.0.1
perf callchain: Fix spelling mistake "statisitcs" -> "statistics"
perf report: Fix spelling mistake "heirachy" -> "hierarchy"
perf python: Fix binding linkage due to rename and move of evsel__increase_rlimit()
perf tests: test_arm_coresight: Simplify source iteration
perf vendor events intel: Add tigerlake two metrics
perf vendor events intel: Add broadwellde two metrics
perf vendor events intel: Fix broadwellde tma_info_system_dram_bw_use metric
perf mem_info: Add and use map_symbol__exit and addr_map_symbol__exit
perf callchain: Minor layout changes to callchain_list
perf callchain: Make brtype_stat in callchain_list optional
...
there's little I can say which isn't in the individual changelogs.
The lengthier patch series are
- "kdump: use generic functions to simplify crashkernel reservation in
arch", from Baoquan He. This is mainly cleanups and consolidation of
the "crashkernel=" kernel parameter handling.
- After much discussion, David Laight's "minmax: Relax type checks in
min() and max()" is here. Hopefully reduces some typecasting and the
use of min_t() and max_t().
- A group of patches from Oleg Nesterov which clean up and slightly fix
our handling of reads from /proc/PID/task/... and which remove
task_struct.therad_group.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZUQP9wAKCRDdBJ7gKXxA
jmOAAQDh8sxagQYocoVsSm28ICqXFeaY9Co1jzBIDdNesAvYVwD/c2DHRqJHEiS4
63BNcG3+hM9nwGJHb5lyh5m79nBMRg0=
=On4u
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2023-11-02-14-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"As usual, lots of singleton and doubleton patches all over the tree
and there's little I can say which isn't in the individual changelogs.
The lengthier patch series are
- 'kdump: use generic functions to simplify crashkernel reservation
in arch', from Baoquan He. This is mainly cleanups and
consolidation of the 'crashkernel=' kernel parameter handling
- After much discussion, David Laight's 'minmax: Relax type checks in
min() and max()' is here. Hopefully reduces some typecasting and
the use of min_t() and max_t()
- A group of patches from Oleg Nesterov which clean up and slightly
fix our handling of reads from /proc/PID/task/... and which remove
task_struct.thread_group"
* tag 'mm-nonmm-stable-2023-11-02-14-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (64 commits)
scripts/gdb/vmalloc: disable on no-MMU
scripts/gdb: fix usage of MOD_TEXT not defined when CONFIG_MODULES=n
.mailmap: add address mapping for Tomeu Vizoso
mailmap: update email address for Claudiu Beznea
tools/testing/selftests/mm/run_vmtests.sh: lower the ptrace permissions
.mailmap: map Benjamin Poirier's address
scripts/gdb: add lx_current support for riscv
ocfs2: fix a spelling typo in comment
proc: test ProtectionKey in proc-empty-vm test
proc: fix proc-empty-vm test with vsyscall
fs/proc/base.c: remove unneeded semicolon
do_io_accounting: use sig->stats_lock
do_io_accounting: use __for_each_thread()
ocfs2: replace BUG_ON() at ocfs2_num_free_extents() with ocfs2_error()
ocfs2: fix a typo in a comment
scripts/show_delta: add __main__ judgement before main code
treewide: mark stuff as __ro_after_init
fs: ocfs2: check status values
proc: test /proc/${pid}/statm
compiler.h: move __is_constexpr() to compiler.h
...
The only thing worth highligthing is that gzip moves to use vmalloc() instead of
kmalloc just as we had a fix for this for zstd on v6.6-rc1. The rest is regular
house keeping, keeping things neat, tidy, and boring.
-----BEGIN PGP SIGNATURE-----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=+tZ8
-----END PGP SIGNATURE-----
Merge tag 'modules-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull modules updates from Luis Chamberlain:
"The only thing worth highligthing is that gzip moves to use vmalloc()
instead of kmalloc just as we had a fix for this for zstd on v6.6-rc1.
The rest is regular house keeping, keeping things neat, tidy, and
boring"
[ The kmalloc -> vmalloc conversion is not the right approach.
Unless you know you need huge areas or know you need to use virtual
mappings for some reason (playing with protection bits or whatever),
you should use kvmalloc()/kvfree, which automatically picks the right
allocation model - Linus ]
* tag 'modules-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
module: Annotate struct module_notes_attrs with __counted_by
module: Fix comment typo
module: Make is_valid_name() return bool
module: Make is_mapping_symbol() return bool
module/decompress: use vmalloc() for gzip decompression workspace
MAINTAINERS: add include/linux/module*.h to modules
module: Clarify documentation of module_param_call()
there are some significant changes nonetheless:
- Some more Spanish-language and Chinese translations.
- The much-discussed documentation of the confidential-computing threat
model.
- Powerpc and RISCV documentation move under Documentation/arch - these
complete this particular bit of documentation churn.
- A large traditional-Chinese documentation update.
- A new document on backporting and conflict resolution.
- Some kernel-doc and Sphinx fixes.
Plus the usual smattering of smaller updates and typo fixes.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmVBNv8PHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5Y0JkH/36MOpkaDnsY69/dMRKSuD4mAAP2H6LS8V63
SsMgH5VCj8lcy/Tz1+J89t14pbcX8l0viKxSo4UxvzoJ5snrz8A8gZ9oqY7NCcNs
nMtolnN5IwdbgGnEGqASSLsl07lnabhRK0VYv9ZO7lHjYQp97VsJ/qrjJn385HFE
vYW8iRcxcKdwtuuwOtbPcdAMjP54saJdNC5wMLsfMR0csKcGbzaSNpqpiGovzT7l
phG2DSxrJH0gUZyeGPryroNppaf+mVKSDSiwRdI8mzm0J67p6dZYYwBS1Iw6Awbf
8iYoj6W63/FVQbXffPx5d6ffOSQh4JkAskxgBUOzluSGusSDc+4=
=9HU5
-----END PGP SIGNATURE-----
Merge tag 'docs-6.7' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"The number of commits for documentation is not huge this time around,
but there are some significant changes nonetheless:
- Some more Spanish-language and Chinese translations
- The much-discussed documentation of the confidential-computing
threat model
- Powerpc and RISCV documentation move under Documentation/arch -
these complete this particular bit of documentation churn
- A large traditional-Chinese documentation update
- A new document on backporting and conflict resolution
- Some kernel-doc and Sphinx fixes
Plus the usual smattering of smaller updates and typo fixes"
* tag 'docs-6.7' of git://git.lwn.net/linux: (40 commits)
scripts/kernel-doc: Fix the regex for matching -Werror flag
docs: backporting: address feedback
Documentation: driver-api: pps: Update PPS generator documentation
speakup: Document USB support
doc: blk-ioprio: Bring the doc in line with the implementation
docs: usb: fix reference to nonexistent file in UVC Gadget
docs: doc-guide: mention 'make refcheckdocs'
Documentation: fix typo in dynamic-debug howto
scripts/kernel-doc: match -Werror flag strictly
Documentation/sphinx: Remove the repeated word "the" in comments.
docs: sparse: add SPDX-License-Identifier
docs/zh_CN: Add subsystem-apis Chinese translation
docs/zh_TW: update contents for zh_TW
docs: submitting-patches: encourage direct notifications to commenters
docs: add backporting and conflict resolution document
docs: move riscv under arch
docs: update link to powerpc/vmemmap_dedup.rst
mm/memory-hotplug: fix typo in documentation
docs: move powerpc under arch
PCI: Update the devres documentation regarding to pcim_*()
...
The ia64 architecture gets its well-earned retirement as planned,
now that there is one last (mostly) working release that will
be maintained as an LTS kernel.
The architecture specific system call tables are updated for
the added map_shadow_stack() syscall and to remove references
to the long-gone sys_lookup_dcookie() syscall.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmVC40IACgkQYKtH/8kJ
Uidhmw/9EX+aWSXGoObJ3fngaNSMw+PmrEuP8qEKBHxfKHcCdX3hc451Oh4GlhaQ
tru91pPwgNvN2/rfoKusxT+V4PemGIzfNni/04rp+P0kvmdw5otQ2yNhsQNsfVmq
XGWvkxF4P2GO6bkjjfR/1dDq7GtlyXtwwPDKeLbYb6TnJOZjtx+EAN27kkfSn1Ms
R4Sa3zJ+DfHUmHL5S9g+7UD/CZ5GfKNmIskI4Mz5GsfoUz/0iiU+Bge/9sdcdSJQ
kmbLy5YnVzfooLZ3TQmBFsO3iAMWb0s/mDdtyhqhTVmTUshLolkPYyKnPFvdupyv
shXcpEST2XJNeaDRnL2K4zSCdxdbnCZHDpjfl9wfioBg7I8NfhXKpf1jYZHH1de4
LXq8ndEFEOVQw/zSpYWfQq1sux8Jiqr+UK/ukbVeFWiGGIUs91gEWtPAf8T0AZo9
ujkJvaWGl98O1g5wmBu0/dAR6QcFJMDfVwbmlIFpU8O+MEaz6X8mM+O5/T0IyTcD
eMbAUjj4uYcU7ihKzHEv/0SS9Of38kzff67CLN5k8wOP/9NlaGZ78o1bVle9b52A
BdhrsAefFiWHp1jT6Y9Rg4HOO/TguQ9e6EWSKOYFulsiLH9LEFaB9RwZLeLytV0W
vlAgY9rUW77g1OJcb7DoNv33nRFuxsKqsnz3DEIXtgozo9CzbYI=
=H1vH
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull ia64 removal and asm-generic updates from Arnd Bergmann:
- The ia64 architecture gets its well-earned retirement as planned,
now that there is one last (mostly) working release that will be
maintained as an LTS kernel.
- The architecture specific system call tables are updated for the
added map_shadow_stack() syscall and to remove references to the
long-gone sys_lookup_dcookie() syscall.
* tag 'asm-generic-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
hexagon: Remove unusable symbols from the ptrace.h uapi
asm-generic: Fix spelling of architecture
arch: Reserve map_shadow_stack() syscall number for all architectures
syscalls: Cleanup references to sys_lookup_dcookie()
Documentation: Drop or replace remaining mentions of IA64
lib/raid6: Drop IA64 support
Documentation: Drop IA64 from feature descriptions
kernel: Drop IA64 support from sig_fault handlers
arch: Remove Itanium (IA-64) architecture
The return value of is_valid_name() is true or false,
so change its type to reflect that.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
vmap_area does not exist on no-MMU, therefore the GDB scripts fail to
load:
Traceback (most recent call last):
File "<...>/vmlinux-gdb.py", line 51, in <module>
import linux.vmalloc
File "<...>/scripts/gdb/linux/vmalloc.py", line 14, in <module>
vmap_area_ptr_type = vmap_area_type.get_type().pointer()
^^^^^^^^^^^^^^^^^^^^^^^^^
File "<...>/scripts/gdb/linux/utils.py", line 28, in get_type
self._type = gdb.lookup_type(self._name)
^^^^^^^^^^^^^^^^^^^^^^^^^^^
gdb.error: No struct type named vmap_area.
To fix this, disable the command and add an informative error message if
CONFIG_MMU is not defined, following the example of lx-slabinfo.
Link: https://lkml.kernel.org/r/20231031202235.2655333-2-ben.wolsieffer@hefring.com
Fixes: 852622bf36 ("scripts/gdb/vmalloc: add vmallocinfo support")
Signed-off-by: Ben Wolsieffer <ben.wolsieffer@hefring.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
MOD_TEXT is only defined if CONFIG_MODULES=y which lead to loading failure
of the gdb scripts when kernel is built without CONFIG_MODULES=y:
Reading symbols from vmlinux...
Traceback (most recent call last):
File "/foo/vmlinux-gdb.py", line 25, in <module>
import linux.constants
File "/foo/scripts/gdb/linux/constants.py", line 14, in <module>
LX_MOD_TEXT = gdb.parse_and_eval("MOD_TEXT")
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
gdb.error: No symbol "MOD_TEXT" in current context.
Add a conditional check on CONFIG_MODULES to fix this error.
Link: https://lkml.kernel.org/r/20231031134848.119391-1-da.gomez@samsung.com
Fixes: b4aff7513d ("scripts/gdb: use mem instead of core_layout to get the module address")
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Tested-by: Daniel Gomez <da.gomez@samsung.com>
Signed-off-by: Daniel Gomez <da.gomez@samsung.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
csr_sscratch CSR holds current task_struct address when hart is in user
space. Trap handler on entry spills csr_sscratch into "tp" (x2) register
and zeroes out csr_sscratch CSR. Trap handler on exit reloads "tp" with
expected user mode value and place current task_struct address again in
csr_sscratch CSR.
This patch assumes "tp" is pointing to task_struct. If value in
csr_sscratch is numerically greater than "tp" then it assumes csr_sscratch
is correct address of current task_struct. This logic holds when
- hart is in user space, "tp" will be less than csr_sscratch.
- hart is in kernel space but not in trap handler, "tp" will be more
than csr_sscratch (csr_sscratch being equal to 0).
- hart is executing trap handler
- "tp" is still pointing to user mode but csr_sscratch contains
ptr to task_struct. Thus numerically higher.
- "tp" is pointing to task_struct but csr_sscratch now contains
either 0 or numerically smaller value (transiently holds
user mode tp)
Link: https://lkml.kernel.org/r/20231026233837.612405-1-debug@rivosinc.com
Signed-off-by: Deepak Gupta <debug@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Tested-by: Hsieh-Tseng Shen <woodrow.shen@sifive.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Glenn Washburn <development@efficientek.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Jeff Xie <xiehuan09@gmail.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit 0f71dcfb4a ("powerpc/ftrace: Add support for
-fpatchable-function-entry") added a script to check for
-fpatchable-function-entry compiler support. The script expects compiler
to emit the section __patchable_function_entries and few nops after a
function entry.
If the compiler understands and emits the above,
CONFIG_ARCH_USING_PATCHABLE_FUNCTION_ENTRY is set.
So teach dummy-tools' gcc about this.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
- Add a kselftest to check for unprobed DT devices
- Fix address translation for some 3 address cells cases
- Refactor firmware node refcounting for AMBA bus
- Add bindings for qcom,sm4450-pdc, Qualcomm Kryo 465 CPU, and Freescale
QMC HDLC
- Add Marantec vendor prefix
- Convert qcom,pm8921-keypad, cnxt,cx92755-wdt, da9062-wdt,
and atmel,at91rm9200-wdt bindings to DT schema
- Several additionalProperties/unevaluatedProperties on child node
schemas fixes
- Drop reserved-memory bindings which now live in dtschema project
- Fix a reference to rockchip,inno-usb2phy.yaml
- Remove backlight nodes from display panel examples
- Expand example for using DT_SCHEMA_FILES
- Merge simple LVDS panel bindings to one binding doc
-----BEGIN PGP SIGNATURE-----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=JCj5
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
- Add a kselftest to check for unprobed DT devices
- Fix address translation for some 3 address cells cases
- Refactor firmware node refcounting for AMBA bus
- Add bindings for qcom,sm4450-pdc, Qualcomm Kryo 465 CPU, and
Freescale QMC HDLC
- Add Marantec vendor prefix
- Convert qcom,pm8921-keypad, cnxt,cx92755-wdt, da9062-wdt, and
atmel,at91rm9200-wdt bindings to DT schema
- Several additionalProperties/unevaluatedProperties on child node
schemas fixes
- Drop reserved-memory bindings which now live in dtschema project
- Fix a reference to rockchip,inno-usb2phy.yaml
- Remove backlight nodes from display panel examples
- Expand example for using DT_SCHEMA_FILES
- Merge simple LVDS panel bindings to one binding doc
* tag 'devicetree-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (34 commits)
dt-bindings: soc: fsl: cpm_qe: cpm1-scc-qmc: Add support for QMC HDLC
dt-bindings: soc: fsl: cpm_qe: cpm1-scc-qmc: Add 'additionalProperties: false' in child nodes
dt-bindings: soc: fsl: cpm_qe: cpm1-scc-qmc: Fix example property name
dt-bindings: arm,coresight-cti: Add missing additionalProperties on child nodes
dt-bindings: arm,coresight-cti: Drop type for 'cpu' property
dt-bindings: soundwire: Add reference to soundwire-controller.yaml schema
dt-bindings: input: syna,rmi4: Make "additionalProperties: true" explicit
media: dt-bindings: ti,ds90ub960: Add missing type for "i2c-alias"
dt-bindings: input: qcom,pm8921-keypad: convert to YAML format
of: overlay: unittest: overlay_bad_unresolved: Spelling s/ok/okay/
of: address: Consolidate bus .map() functions
of: address: Store number of bus flag cells rather than bool
of: unittest: Add tests for address translations
of: address: Remove duplicated functions
of: address: Fix address translation when address-size is greater than 2
dt-bindings: watchdog: cnxt,cx92755-wdt: convert txt to yaml
dt-bindings: watchdog: da9062-wdt: convert txt to yaml
dt-bindings: watchdog: fsl,scu-wdt: Document imx8dl
dt-bindings: watchdog: atmel,at91rm9200-wdt: convert txt to yaml
dt-bindings: usb: rockchip,dwc3: update inno usb2 phy binding name
...
to allow rust code to schedule work items on workqueues. While the current
bindings don't cover all of the workqueue API, it provides enough for basic
usage and can be expanded as needed.
-----BEGIN PGP SIGNATURE-----
iIQEABYIACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCZUBNNw4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGQWtAP4vD31xd8YOu8UnUyFP3rJaA3F5VwoVm6DK9Lo7
otBe8wD9ExoJHTiZiJwucvqbx7/z3EbbJYro56pIea9/O59t+AU=
=cTn3
-----END PGP SIGNATURE-----
Merge tag 'wq-for-6.7-rust-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue rust bindings from Tejun Heo:
"Add rust bindings to allow rust code to schedule work items on
workqueues.
While the current bindings don't cover all of the workqueue API, it
provides enough for basic usage and can be expanded as needed"
* tag 'wq-for-6.7-rust-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
rust: workqueue: add examples
rust: workqueue: add `try_spawn` helper method
rust: workqueue: implement `WorkItemPointer` for pointer types
rust: workqueue: add helper for defining work_struct fields
rust: workqueue: define built-in queues
rust: workqueue: add low-level workqueue bindings
rust: sync: add `Arc::{from_raw, into_raw}`
A small one compared to the previous one in terms of features. In terms
of lines, as usual, the 'alloc' version upgrade accounts for most of them.
Toolchain and infrastructure:
- Upgrade to Rust 1.73.0.
This time around, due to how the kernel and Rust schedules have
aligned, there are two upgrades in fact. They contain the fixes for
a few issues we reported to the Rust project.
In addition, a few cleanups indicated by the upgraded compiler
or possible thanks to it. For instance, the compiler now detects
redundant explicit links.
- A couple changes to the Rust 'Makefile' so that it can be used with
toybox tools, allowing Rust to be used in the Android kernel build.
x86:
- Enable IBT if enabled in C.
Documentation:
- Add "The Rust experiment" section to the Rust index page.
MAINTAINERS
- Add Maintainer Entry Profile field ('P:').
- Update our 'W:' field to point to the webpage we have been building
this year.
-----BEGIN PGP SIGNATURE-----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=rKLl
-----END PGP SIGNATURE-----
Merge tag 'rust-6.7' of https://github.com/Rust-for-Linux/linux
Pull rust updates from Miguel Ojeda:
"A small one compared to the previous one in terms of features. In
terms of lines, as usual, the 'alloc' version upgrade accounts for
most of them.
Toolchain and infrastructure:
- Upgrade to Rust 1.73.0
This time around, due to how the kernel and Rust schedules have
aligned, there are two upgrades in fact. They contain the fixes for
a few issues we reported to the Rust project.
In addition, a few cleanups indicated by the upgraded compiler or
possible thanks to it. For instance, the compiler now detects
redundant explicit links.
- A couple changes to the Rust 'Makefile' so that it can be used with
toybox tools, allowing Rust to be used in the Android kernel build.
x86:
- Enable IBT if enabled in C
Documentation:
- Add "The Rust experiment" section to the Rust index page
MAINTAINERS:
- Add Maintainer Entry Profile field ('P:').
- Update our 'W:' field to point to the webpage we have been building
this year"
* tag 'rust-6.7' of https://github.com/Rust-for-Linux/linux:
docs: rust: add "The Rust experiment" section
x86: Enable IBT in Rust if enabled in C
rust: Use grep -Ev rather than relying on GNU grep
rust: Use awk instead of recent xargs
rust: upgrade to Rust 1.73.0
rust: print: use explicit link in documentation
rust: task: remove redundant explicit link
rust: kernel: remove `#[allow(clippy::new_ret_no_self)]`
MAINTAINERS: add Maintainer Entry Profile field for Rust
MAINTAINERS: update Rust webpage
rust: upgrade to Rust 1.72.1
rust: arc: add explicit `drop()` around `Box::from_raw()`
- Add LKDTM test for stuck CPUs (Mark Rutland)
- Improve LKDTM selftest behavior under UBSan (Ricardo Cañuelo)
- Refactor more 1-element arrays into flexible arrays (Gustavo A. R. Silva)
- Analyze and replace strlcpy and strncpy uses (Justin Stitt, Azeem Shaikh)
- Convert group_info.usage to refcount_t (Elena Reshetova)
- Add __counted_by annotations (Kees Cook, Gustavo A. R. Silva)
- Add Kconfig fragment for basic hardening options (Kees Cook, Lukas Bulwahn)
- Fix randstruct GCC plugin performance mode to stay in groups (Kees Cook)
- Fix strtomem() compile-time check for small sources (Kees Cook)
-----BEGIN PGP SIGNATURE-----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=0iVF
-----END PGP SIGNATURE-----
Merge tag 'hardening-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
"One of the more voluminous set of changes is for adding the new
__counted_by annotation[1] to gain run-time bounds checking of
dynamically sized arrays with UBSan.
- Add LKDTM test for stuck CPUs (Mark Rutland)
- Improve LKDTM selftest behavior under UBSan (Ricardo Cañuelo)
- Refactor more 1-element arrays into flexible arrays (Gustavo A. R.
Silva)
- Analyze and replace strlcpy and strncpy uses (Justin Stitt, Azeem
Shaikh)
- Convert group_info.usage to refcount_t (Elena Reshetova)
- Add __counted_by annotations (Kees Cook, Gustavo A. R. Silva)
- Add Kconfig fragment for basic hardening options (Kees Cook, Lukas
Bulwahn)
- Fix randstruct GCC plugin performance mode to stay in groups (Kees
Cook)
- Fix strtomem() compile-time check for small sources (Kees Cook)"
* tag 'hardening-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (56 commits)
hwmon: (acpi_power_meter) replace open-coded kmemdup_nul
reset: Annotate struct reset_control_array with __counted_by
kexec: Annotate struct crash_mem with __counted_by
virtio_console: Annotate struct port_buffer with __counted_by
ima: Add __counted_by for struct modsig and use struct_size()
MAINTAINERS: Include stackleak paths in hardening entry
string: Adjust strtomem() logic to allow for smaller sources
hardening: x86: drop reference to removed config AMD_IOMMU_V2
randstruct: Fix gcc-plugin performance mode to stay in group
mailbox: zynqmp: Annotate struct zynqmp_ipi_pdata with __counted_by
drivers: thermal: tsens: Annotate struct tsens_priv with __counted_by
irqchip/imx-intmux: Annotate struct intmux_data with __counted_by
KVM: Annotate struct kvm_irq_routing_table with __counted_by
virt: acrn: Annotate struct vm_memory_region_batch with __counted_by
hwmon: Annotate struct gsc_hwmon_platform_data with __counted_by
sparc: Annotate struct cpuinfo_tree with __counted_by
isdn: kcapi: replace deprecated strncpy with strscpy_pad
isdn: replace deprecated strncpy with strscpy
NFS/flexfiles: Annotate struct nfs4_ff_layout_segment with __counted_by
nfs41: Annotate struct nfs4_file_layout_dsaddr with __counted_by
...
This pull request contains the following branches:
rcu/torture: RCU torture, locktorture and generic torture infrastructure
updates that include various fixes, cleanups and consolidations.
Among the user visible things, ftrace dumps can now be found into
their own file, and module parameters get better documented and
reported on dumps.
rcu/fixes: Generic and misc fixes all over the place. Some highlights:
* Hotplug handling has seen some light cleanups and comments.
* An RCU barrier can now be triggered through sysfs to serialize
memory stress testing and avoid OOM.
* Object information is now dumped in case of invalid callback
invocation.
* Also various SRCU issues, too hard to trigger to deserve urgent
pull requests, have been fixed.
rcu/docs: RCU documentation updates
rcu/refscale: RCU reference scalability test minor fixes and doc
improvements.
rcu/tasks: RCU tasks minor fixes
rcu/stall: Stall detection updates. Introduce RCU CPU Stall notifiers
that allows a subsystem to provide informations to help debugging.
Also cure some false positive stalls.
-----BEGIN PGP SIGNATURE-----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=cVD7
-----END PGP SIGNATURE-----
Merge tag 'rcu-next-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks
Pull RCU updates from Frederic Weisbecker:
- RCU torture, locktorture and generic torture infrastructure updates
that include various fixes, cleanups and consolidations.
Among the user visible things, ftrace dumps can now be found into
their own file, and module parameters get better documented and
reported on dumps.
- Generic and misc fixes all over the place. Some highlights:
* Hotplug handling has seen some light cleanups and comments
* An RCU barrier can now be triggered through sysfs to serialize
memory stress testing and avoid OOM
* Object information is now dumped in case of invalid callback
invocation
* Also various SRCU issues, too hard to trigger to deserve urgent
pull requests, have been fixed
- RCU documentation updates
- RCU reference scalability test minor fixes and doc improvements.
- RCU tasks minor fixes
- Stall detection updates. Introduce RCU CPU Stall notifiers that
allows a subsystem to provide informations to help debugging. Also
cure some false positive stalls.
* tag 'rcu-next-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks: (56 commits)
srcu: Only accelerate on enqueue time
locktorture: Check the correct variable for allocation failure
srcu: Fix callbacks acceleration mishandling
rcu: Comment why callbacks migration can't wait for CPUHP_RCUTREE_PREP
rcu: Standardize explicit CPU-hotplug calls
rcu: Conditionally build CPU-hotplug teardown callbacks
rcu: Remove references to rcu_migrate_callbacks() from diagrams
rcu: Assume rcu_report_dead() is always called locally
rcu: Assume IRQS disabled from rcu_report_dead()
rcu: Use rcu_segcblist_segempty() instead of open coding it
rcu: kmemleak: Ignore kmemleak false positives when RCU-freeing objects
srcu: Fix srcu_struct node grpmask overflow on 64-bit systems
torture: Convert parse-console.sh to mktemp
rcutorture: Traverse possible cpu to set maxcpu in rcu_nocb_toggle()
rcutorture: Replace schedule_timeout*() 1-jiffy waits with HZ/20
torture: Add kvm.sh --debug-info argument
locktorture: Rename readers_bind/writers_bind to bind_readers/bind_writers
doc: Catch-up update for locktorture module parameters
locktorture: Add call_rcu_chains module parameter
locktorture: Add new module parameters to lock_torture_print_module_parms()
...
- Fix potential MAX_NAME_LEN limit related build failures
- Fix scripts/faddr2line symbol filtering bug
- Fix scripts/faddr2line on LLVM=1
- Fix scripts/faddr2line to accept readelf output with mapping symbols
- Minor cleanups
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=9U5x
-----END PGP SIGNATURE-----
Merge tag 'objtool-core-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Ingo Molnar:
"Misc fixes and cleanups:
- Fix potential MAX_NAME_LEN limit related build failures
- Fix scripts/faddr2line symbol filtering bug
- Fix scripts/faddr2line on LLVM=1
- Fix scripts/faddr2line to accept readelf output with mapping
symbols
- Minor cleanups"
* tag 'objtool-core-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
scripts/faddr2line: Skip over mapping symbols in output from readelf
scripts/faddr2line: Use LLVM addr2line and readelf if LLVM=1
scripts/faddr2line: Don't filter out non-function symbols from readelf
objtool: Remove max symbol name length limitation
objtool: Propagate early errors
objtool: Use 'the fallthrough' pseudo-keyword
x86/speculation, objtool: Use absolute relocations for annotations
x86/unwind/orc: Remove redundant initialization of 'mid' pointer in __orc_find()
- Futex improvements:
- Add the 'futex2' syscall ABI, which is an attempt to get away from the
multiplex syscall and adds a little room for extentions, while lifting
some limitations.
- Fix futex PI recursive rt_mutex waiter state bug
- Fix inter-process shared futexes on no-MMU systems
- Use folios instead of pages
- Micro-optimizations of locking primitives:
- Improve arch_spin_value_unlocked() on asm-generic ticket spinlock
architectures, to improve lockref code generation.
- Improve the x86-32 lockref_get_not_zero() main loop by adding
build-time CMPXCHG8B support detection for the relevant lockref code,
and by better interfacing the CMPXCHG8B assembly code with the compiler.
- Introduce arch_sync_try_cmpxchg() on x86 to improve sync_try_cmpxchg()
code generation. Convert some sync_cmpxchg() users to sync_try_cmpxchg().
- Micro-optimize rcuref_put_slowpath()
- Locking debuggability improvements:
- Improve CONFIG_DEBUG_RT_MUTEXES=y to have a fast-path as well
- Enforce atomicity of sched_submit_work(), which is de-facto atomic but
was un-enforced previously.
- Extend <linux/cleanup.h>'s no_free_ptr() with __must_check semantics
- Fix ww_mutex self-tests
- Clean up const-propagation in <linux/seqlock.h> and simplify
the API-instantiation macros a bit.
- RT locking improvements:
- Provide the rt_mutex_*_schedule() primitives/helpers and use them
in the rtmutex code to avoid recursion vs. rtlock on the PI state.
- Add nested blocking lockdep asserts to rt_mutex_lock(), rtlock_lock()
and rwbase_read_lock().
- Plus misc fixes & cleanups
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=36Ff
-----END PGP SIGNATURE-----
Merge tag 'locking-core-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Info Molnar:
"Futex improvements:
- Add the 'futex2' syscall ABI, which is an attempt to get away from
the multiplex syscall and adds a little room for extentions, while
lifting some limitations.
- Fix futex PI recursive rt_mutex waiter state bug
- Fix inter-process shared futexes on no-MMU systems
- Use folios instead of pages
Micro-optimizations of locking primitives:
- Improve arch_spin_value_unlocked() on asm-generic ticket spinlock
architectures, to improve lockref code generation
- Improve the x86-32 lockref_get_not_zero() main loop by adding
build-time CMPXCHG8B support detection for the relevant lockref
code, and by better interfacing the CMPXCHG8B assembly code with
the compiler
- Introduce arch_sync_try_cmpxchg() on x86 to improve
sync_try_cmpxchg() code generation. Convert some sync_cmpxchg()
users to sync_try_cmpxchg().
- Micro-optimize rcuref_put_slowpath()
Locking debuggability improvements:
- Improve CONFIG_DEBUG_RT_MUTEXES=y to have a fast-path as well
- Enforce atomicity of sched_submit_work(), which is de-facto atomic
but was un-enforced previously.
- Extend <linux/cleanup.h>'s no_free_ptr() with __must_check
semantics
- Fix ww_mutex self-tests
- Clean up const-propagation in <linux/seqlock.h> and simplify the
API-instantiation macros a bit
RT locking improvements:
- Provide the rt_mutex_*_schedule() primitives/helpers and use them
in the rtmutex code to avoid recursion vs. rtlock on the PI state.
- Add nested blocking lockdep asserts to rt_mutex_lock(),
rtlock_lock() and rwbase_read_lock()
.. plus misc fixes & cleanups"
* tag 'locking-core-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (39 commits)
futex: Don't include process MM in futex key on no-MMU
locking/seqlock: Fix grammar in comment
alpha: Fix up new futex syscall numbers
locking/seqlock: Propagate 'const' pointers within read-only methods, remove forced type casts
locking/lockdep: Fix string sizing bug that triggers a format-truncation compiler-warning
locking/seqlock: Change __seqprop() to return the function pointer
locking/seqlock: Simplify SEQCOUNT_LOCKNAME()
locking/atomics: Use atomic_try_cmpxchg_release() to micro-optimize rcuref_put_slowpath()
locking/atomic, xen: Use sync_try_cmpxchg() instead of sync_cmpxchg()
locking/atomic/x86: Introduce arch_sync_try_cmpxchg()
locking/atomic: Add generic support for sync_try_cmpxchg() and its fallback
locking/seqlock: Fix typo in comment
futex/requeue: Remove unnecessary ‘NULL’ initialization from futex_proxy_trylock_atomic()
locking/local, arch: Rewrite local_add_unless() as a static inline function
locking/debug: Fix debugfs API return value checks to use IS_ERR()
locking/ww_mutex/test: Make sure we bail out instead of livelock
locking/ww_mutex/test: Fix potential workqueue corruption
locking/ww_mutex/test: Use prng instead of rng to avoid hangs at bootup
futex: Add sys_futex_requeue()
futex: Add flags2 argument to futex_requeue()
...
machinery and other, general cleanups to the hw mitigations code,
by Josh Poimboeuf
- Improve the return thunk detection by objtool as it is absolutely
important that the default return thunk is not used after returns
have been patched. Future work to detect and report this better is
pending
- Other misc cleanups and fixes
-----BEGIN PGP SIGNATURE-----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=E7c4
-----END PGP SIGNATURE-----
Merge tag 'x86_bugs_for_6.7_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 hw mitigation updates from Borislav Petkov:
- A bunch of improvements, cleanups and fixlets to the SRSO mitigation
machinery and other, general cleanups to the hw mitigations code, by
Josh Poimboeuf
- Improve the return thunk detection by objtool as it is absolutely
important that the default return thunk is not used after returns
have been patched. Future work to detect and report this better is
pending
- Other misc cleanups and fixes
* tag 'x86_bugs_for_6.7_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
x86/retpoline: Document some thunk handling aspects
x86/retpoline: Make sure there are no unconverted return thunks due to KCSAN
x86/callthunks: Delete unused "struct thunk_desc"
x86/vdso: Run objtool on vdso32-setup.o
objtool: Fix return thunk patching in retpolines
x86/srso: Remove unnecessary semicolon
x86/pti: Fix kernel warnings for pti= and nopti cmdline options
x86/calldepth: Rename __x86_return_skl() to call_depth_return_thunk()
x86/nospec: Refactor UNTRAIN_RET[_*]
x86/rethunk: Use SYM_CODE_START[_LOCAL]_NOALIGN macros
x86/srso: Disentangle rethunk-dependent options
x86/srso: Move retbleed IBPB check into existing 'has_microcode' code block
x86/bugs: Remove default case for fully switched enums
x86/srso: Remove 'pred_cmd' label
x86/srso: Unexport untraining functions
x86/srso: Improve i-cache locality for alias mitigation
x86/srso: Fix unret validation dependencies
x86/srso: Fix vulnerability reporting for missing microcode
x86/srso: Print mitigation for retbleed IBPB case
x86/srso: Print actual mitigation if requested mitigation isn't possible
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZTppWAAKCRCRxhvAZXjc
okB2AP4jjoRErJBwj245OIDJqzoj4m4UVOVd0MH2AkiSpANczwD/TToChdpusY2y
qAYg1fQoGMbDVlb7Txaj9qI9ieCf9w0=
=2PXg
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.7.xattr' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull vfs xattr updates from Christian Brauner:
"The 's_xattr' field of 'struct super_block' currently requires a
mutable table of 'struct xattr_handler' entries (although each handler
itself is const). However, no code in vfs actually modifies the
tables.
This changes the type of 's_xattr' to allow const tables, and modifies
existing file systems to move their tables to .rodata. This is
desirable because these tables contain entries with function pointers
in them; moving them to .rodata makes it considerably less likely to
be modified accidentally or maliciously at runtime"
* tag 'vfs-6.7.xattr' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs: (30 commits)
const_structs.checkpatch: add xattr_handler
net: move sockfs_xattr_handlers to .rodata
shmem: move shmem_xattr_handlers to .rodata
overlayfs: move xattr tables to .rodata
xfs: move xfs_xattr_handlers to .rodata
ubifs: move ubifs_xattr_handlers to .rodata
squashfs: move squashfs_xattr_handlers to .rodata
smb: move cifs_xattr_handlers to .rodata
reiserfs: move reiserfs_xattr_handlers to .rodata
orangefs: move orangefs_xattr_handlers to .rodata
ocfs2: move ocfs2_xattr_handlers and ocfs2_xattr_handler_map to .rodata
ntfs3: move ntfs_xattr_handlers to .rodata
nfs: move nfs4_xattr_handlers to .rodata
kernfs: move kernfs_xattr_handlers to .rodata
jfs: move jfs_xattr_handlers to .rodata
jffs2: move jffs2_xattr_handlers to .rodata
hfsplus: move hfsplus_xattr_handlers to .rodata
hfs: move hfs_xattr_handlers to .rodata
gfs2: move gfs2_xattr_handlers_max to .rodata
fuse: move fuse_xattr_handlers to .rodata
...
Swarup reported a "make htmldocs" warning:
Variable length lookbehind is experimental in regex;
marked by <-- HERE in m/(?<=^|\s)-Werror(?=$|\s)
<-- HERE / at ./scripts/kernel-doc line 188.
Akira managed to reproduce it by perl v5.34.0.
On second thought, it is not necessary to have the complicated
"lookahead and lookbehind" things, and the regex can be simplified.
Generally, the kernel-doc warnings should be considered as errors only
when "-Werror" flag is set in KCFLAGS, but not when
"-Werror=<diagnostic-type>" is set, which means there needs to be a
space or start of string before "-Werror", and a space or end of string
after "-Werror".
The following cases have been tested to work as expected:
* kernel-doc warnings are considered as errors:
$ KCFLAGS="-Werror" make W=1
$ KCFLAGS="-Wcomment -Werror" make W=1
$ KCFLAGS="-Werror -Wundef" make W=1
$ KCFLAGS="-Wcomment -Werror -Wundef" make W=1
* kernel-doc warnings remain as warnings:
$ KCFLAGS="-Werror=return-type" make W=1
$ KCFLAGS="-Wcomment -Werror=return-type" make W=1
$ KCFLAGS="-Werror=return-type -Wundef" make W=1
$ KCFLAGS="-Wcomment -Werror=return-type -Wundef" make W=1
The "Variable length lookbehind is experimental in regex" warning is
also resolved by this patch.
Fixes: 91f950e8b9 ("scripts/kernel-doc: match -Werror flag strictly")
Reported-by: Swarup Laxman Kotiaklapudi <swarupkotikalapudi@gmail.com>
Signed-off-by: Yujie Liu <yujie.liu@intel.com>
Closes: https://lore.kernel.org/r/20231028182231.123996-1-swarupkotikalapudi@gmail.com/
Reviewed-by: Akira Yokosawa <akiyks@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20231030085404.3343403-1-yujie.liu@intel.com
ALL_INIT_TEXT_SECTIONS and ALL_EXIT_TEXT_SECTIONS are only used in
the macro definition of ALL_TEXT_SECTIONS.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
ALL_INIT_SECTIONS is defined as follows:
#define ALL_INIT_SECTIONS INIT_SECTIONS, ALL_XXXINIT_SECTIONS
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Theoretically, we could export conditionally-discarded code sections,
such as .meminit*, if all the users can become modular under a certain
condition. However, that would be difficult to control and such a tricky
case has never occurred.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
These symbol patterns were whitelisted to allow them to reference to
functions with the old __devinit and __devexit annotations.
We stopped doing this a long time ago, for example, commit 6f03979051
("Drivers: scsi: remove __dev* attributes.") remove those annotations
from the scsi drivers.
Keep *_ops, *_probe, and *_console, otherwise they will really cause
section mismatch warnings.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Drivers must not reference .meminit* sections, which are discarded
when CONFIG_MEMORY_HOTPLUG=n.
The reason for whitelisting "*driver" in the section mismatch check
was to allow drivers to reference symbols annotated as __devinit or
__devexit that existed in the past.
Those annotations were removed by the following commits:
- 54b956b903 ("Remove __dev* markings from init.h")
- 92e9e6d1f9 ("modpost.c: Stop checking __dev* section mismatches")
Remove the stale whitelist.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
We have never used __memexit, __memexitdata, or __memexitconst.
These were unneeded.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
scripts/pahole-flags.sh is executed so many times.
You can confirm it, as follows:
$ cat <<EOF >> scripts/pahole-flags.sh
> echo "scripts/pahole-flags.sh was executed" >&2
> EOF
$ make -s
scripts/pahole-flags.sh was executed
scripts/pahole-flags.sh was executed
scripts/pahole-flags.sh was executed
scripts/pahole-flags.sh was executed
scripts/pahole-flags.sh was executed
[ lots of repeated lines... ]
This scripts is executed more than 20 times during the kernel build
because PAHOLE_FLAGS is a recursively expanded variable and exported
to sub-processes.
With GNU Make >= 4.4, it is executed more than 60 times because
exported variables are also passed to other $(shell ) invocations.
Without careful coding, it is known to cause an exponential fork
explosion. [1]
The use of $(shell ) in an exported recursive variable is likely wrong
because $(shell ) is always evaluated due to the 'export' keyword, and
the evaluation can occur multiple times by the nature of recursive
variables.
Convert the shell script to a Makefile, which is included only when
CONFIG_DEBUG_INFO_BTF=y.
[1]: https://savannah.gnu.org/bugs/index.php?64746
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Tested-by: Alan Maguire <alan.maguire@oracle.com>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
The '%.ko' rule in arch/*/Makefile.postlink does nothing but call the
'true' command.
Remove the unneeded code.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
Currently, there is no standard implementation for vdso_install,
leading to various issues:
1. Code duplication
Many architectures duplicate similar code just for copying files
to the install destination.
Some architectures (arm, sparc, x86) create build-id symlinks,
introducing more code duplication.
2. Unintended updates of in-tree build artifacts
The vdso_install rule depends on the vdso files to install.
It may update in-tree build artifacts. This can be problematic,
as explained in commit 19514fc665 ("arm, kbuild: make
"make install" not depend on vmlinux").
3. Broken code in some architectures
Makefile code is often copied from one architecture to another
without proper adaptation.
'make vdso_install' for parisc does not work.
'make vdso_install' for s390 installs vdso64, but not vdso32.
To address these problems, this commit introduces a generic vdso_install
rule.
Architectures that support vdso_install need to define vdso-install-y
in arch/*/Makefile. vdso-install-y lists the files to install.
For example, arch/x86/Makefile looks like this:
vdso-install-$(CONFIG_X86_64) += arch/x86/entry/vdso/vdso64.so.dbg
vdso-install-$(CONFIG_X86_X32_ABI) += arch/x86/entry/vdso/vdsox32.so.dbg
vdso-install-$(CONFIG_X86_32) += arch/x86/entry/vdso/vdso32.so.dbg
vdso-install-$(CONFIG_IA32_EMULATION) += arch/x86/entry/vdso/vdso32.so.dbg
These files will be installed to $(MODLIB)/vdso/ with the .dbg suffix,
if exists, stripped away.
vdso-install-y can optionally take the second field after the colon
separator. This is needed because some architectures install a vdso
file as a different base name.
The following is a snippet from arch/arm64/Makefile.
vdso-install-$(CONFIG_COMPAT_VDSO) += arch/arm64/kernel/vdso32/vdso.so.dbg:vdso32.so
This will rename vdso.so.dbg to vdso32.so during installation. If such
architectures change their implementation so that the base names match,
this workaround will go away.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Sven Schnelle <svens@linux.ibm.com> # s390
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Reviewed-by: Guo Ren <guoren@kernel.org>
Acked-by: Helge Deller <deller@gmx.de> # parisc
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
CDX controller provides subsystem vendor, subsystem device, class and
revision info of the device along with vendor and device ID in native
endian format. CDX Bus system uses this information to bind the cdx
device to the cdx device driver.
Co-developed-by: Puneet Gupta <puneet.gupta@amd.com>
Signed-off-by: Puneet Gupta <puneet.gupta@amd.com>
Co-developed-by: Nipun Gupta <nipun.gupta@amd.com>
Signed-off-by: Nipun Gupta <nipun.gupta@amd.com>
Signed-off-by: Abhijit Gangurde <abhijit.gangurde@amd.com>
Reviewed-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Tested-by: Nikhil Agarwal <nikhil.agarwal@amd.com>
Link: https://lore.kernel.org/r/20231017160505.10640-8-abhijit.gangurde@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kernel-internal prototypes, references to current_thread_info()
and code hidden behind a CONFIG_HEXAGON_ARCH_VERSION switch are
certainly not usable in userspace, so this should not reside
in a uapi header. Move the code into an internal version of
ptrace.h instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Mapping symbols emitted in the readelf output can confuse the
'faddr2line' symbol size calculation, resulting in the erroneous
rejection of valid offsets. This is especially prevalent when building
an arm64 kernel with CONFIG_CFI_CLANG=y, where most functions are
prefixed with a 32-bit data value in a '$d.n' section. For example:
447538: ffff800080014b80 548 FUNC GLOBAL DEFAULT 2 do_one_initcall
104: ffff800080014c74 0 NOTYPE LOCAL DEFAULT 2 $x.73
106: ffff800080014d30 0 NOTYPE LOCAL DEFAULT 2 $x.75
111: ffff800080014da4 0 NOTYPE LOCAL DEFAULT 2 $d.78
112: ffff800080014da8 0 NOTYPE LOCAL DEFAULT 2 $x.79
36: ffff800080014de0 200 FUNC LOCAL DEFAULT 2 run_init_process
Adding a warning to do_one_initcall() results in:
| WARNING: CPU: 0 PID: 1 at init/main.c:1236 do_one_initcall+0xf4/0x260
Which 'faddr2line' refuses to accept:
$ ./scripts/faddr2line vmlinux do_one_initcall+0xf4/0x260
skipping do_one_initcall address at 0xffff800080014c74 due to size mismatch (0x260 != 0x224)
no match for do_one_initcall+0xf4/0x260
Filter out these entries from readelf using a shell reimplementation of
is_mapping_symbol(), so that the size of a symbol is calculated as a
delta to the next symbol present in ksymtab.
Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20231002165750.1661-4-will@kernel.org
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
GNU utilities cannot necessarily parse objects built by LLVM, which can
result in confusing errors when using 'faddr2line':
$ CROSS_COMPILE=aarch64-linux-gnu- ./scripts/faddr2line vmlinux do_one_initcall+0xf4/0x260
aarch64-linux-gnu-addr2line: vmlinux: unknown type [0x13] section `.relr.dyn'
aarch64-linux-gnu-addr2line: DWARF error: invalid or unhandled FORM value: 0x25
do_one_initcall+0xf4/0x260:
aarch64-linux-gnu-addr2line: vmlinux: unknown type [0x13] section `.relr.dyn'
aarch64-linux-gnu-addr2line: DWARF error: invalid or unhandled FORM value: 0x25
$x.73 at main.c:?
Although this can be worked around by setting CROSS_COMPILE to "llvm=-",
it's cleaner to follow the same syntax as the top-level Makefile and
accept LLVM= as an indication to use the llvm- tools, optionally
specifying their location or specific version number.
Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20231002165750.1661-3-will@kernel.org
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
As Josh points out in 20230724234734.zy67gm674vl3p3wv@treble:
> Problem is, I think the kernel's symbol printing code prints the
> nearest kallsyms symbol, and there are some valid non-FUNC code
> symbols. For example, syscall_return_via_sysret.
so we shouldn't be considering only 'FUNC'-type symbols in the output
from readelf.
Drop the function symbol type filtering from the faddr2line outer loop.
Suggested-by: Josh Poimboeuf <jpoimboe@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20230724234734.zy67gm674vl3p3wv@treble
Signed-off-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20231002165750.1661-2-will@kernel.org
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
In our CI testing, we use some commands as below to only turn a specific
type of warnings into errors, but we notice that kernel-doc warnings
are also turned into errors unexpectedly.
$ make KCFLAGS="-Werror=return-type" W=1 kernel/fork.o
kernel/fork.c:1406: warning: Function parameter or member 'mm' not described in 'set_mm_exe_file'
kernel/fork.c:1406: warning: Function parameter or member 'new_exe_file' not described in 'set_mm_exe_file'
kernel/fork.c:1441: warning: Function parameter or member 'mm' not described in 'replace_mm_exe_file'
kernel/fork.c:1441: warning: Function parameter or member 'new_exe_file' not described in 'replace_mm_exe_file'
kernel/fork.c:1491: warning: Function parameter or member 'mm' not described in 'get_mm_exe_file'
kernel/fork.c:1510: warning: Function parameter or member 'task' not described in 'get_task_exe_file'
kernel/fork.c:1534: warning: Function parameter or member 'task' not described in 'get_task_mm'
kernel/fork.c:2109: warning: bad line:
kernel/fork.c:2130: warning: Function parameter or member 'ret' not described in '__pidfd_prepare'
kernel/fork.c:2130: warning: Excess function parameter 'pidfd' description in '__pidfd_prepare'
kernel/fork.c:2179: warning: Function parameter or member 'ret' not described in 'pidfd_prepare'
kernel/fork.c:2179: warning: Excess function parameter 'pidfd' description in 'pidfd_prepare'
kernel/fork.c:3195: warning: expecting prototype for clone3(). Prototype was for sys_clone3() instead
13 warnings as Errors
make[3]: *** [scripts/Makefile.build:243: kernel/fork.o] Error 13
make[3]: *** Deleting file 'kernel/fork.o'
make[2]: *** [scripts/Makefile.build:480: kernel] Error 2
make[1]: *** [/root/linux/Makefile:1913: .] Error 2
make: *** [Makefile:234: __sub-make] Error 2
>From the git history, commit 2c12c8103d ("scripts/kernel-doc:
optionally treat warnings as errors") introduces a new command-line
option to make kernel-doc warnings into errors. It can also read the
KCFLAGS environment variable to decide whether to turn this option on,
but the regex used for matching may not be accurate enough. It can match
both "-Werror" and "-Werror=<diagnostic-type>", so the option is turned
on by mistake in the latter case.
Fix this by strictly matching the flag "-Werror": there must be a space
or start of string in the front, and a space or end of string at the
end. This can handle all the following cases correctly:
KCFLAGS="-Werror" make W=1 [MATCH]
KCFLAGS="-Werror=return-type" make W=1 [NO MATCH]
KCFLAGS="-Wcomment -Werror -Wundef" make W=1 [MATCH]
KCFLAGS="-Wcomment -Werror=return-type -Wundef" make W=1 [NO MATCH]
Fixes: 2c12c8103d ("scripts/kernel-doc: optionally treat warnings as errors")
Signed-off-by: Yujie Liu <yujie.liu@intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20231019095637.2471840-1-yujie.liu@intel.com>
VC04 has now a independent bus vchiq_bus to register its devices.
However, the module auto-loading for bcm2835-audio and bcm2835-camera
currently happens through MODULE_ALIAS() macro specified explicitly.
The correct way to auto-load a module, is when the alias is picked
out from MODULE_DEVICE_TABLE(). In order to get there, we need to
introduce vchiq_device_id and add relevant entries in file2alias.c
infrastructure so that aliases can be generated. This patch targets
adding vchiq_device_id and do_vchiq_entry, in order to
generate those alias using the /script/mod/file2alias.c.
Going forward the MODULE_ALIAS() from bcm2835-camera and bcm2835-audio
will be dropped, in favour of MODULE_DEVICE_TABLE being used there.
The alias format for vchiq_bus devices will be "vchiq:<dev_name>".
Adjust the vchiq_bus_uevent() to reflect that.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Link: https://lore.kernel.org/r/20231019090128.430297-2-umang.jain@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Enabling CONFIG_KCSAN leads to unconverted, default return thunks to
remain after patching.
As David Kaplan describes in his debugging of the issue, it is caused by
a couple of KCSAN-generated constructors which aren't processed by
objtool:
"When KCSAN is enabled, GCC generates lots of constructor functions
named _sub_I_00099_0 which call __tsan_init and then return. The
returns in these are generally annotated normally by objtool and fixed
up at runtime. But objtool runs on vmlinux.o and vmlinux.o does not
include a couple of object files that are in vmlinux, like
init/version-timestamp.o and .vmlinux.export.o, both of which contain
_sub_I_00099_0 functions. As a result, the returns in these functions
are not annotated, and the panic occurs when we call one of them in
do_ctors and it uses the default return thunk.
This difference can be seen by counting the number of these functions in the object files:
$ objdump -d vmlinux.o|grep -c "<_sub_I_00099_0>:"
2601
$ objdump -d vmlinux|grep -c "<_sub_I_00099_0>:"
2603
If these functions are only run during kernel boot, there is no
speculation concern."
Fix it by disabling KCSAN on version-timestamp.o and .vmlinux.export.o
so the extra functions don't get generated. KASAN and GCOV are already
disabled for those files.
[ bp: Massage commit message. ]
Closes: https://lore.kernel.org/lkml/20231016214810.GA3942238@dev-arch.thelio-3990X/
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Marco Elver <elver@google.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20231017165946.v4i2d4exyqwqq3bx@treble
CONFIG_CPU_SRSO isn't dependent on CONFIG_CPU_UNRET_ENTRY (AMD
Retbleed), so the two features are independently configurable. Fix
several issues for the (presumably rare) case where CONFIG_CPU_SRSO is
enabled but CONFIG_CPU_UNRET_ENTRY isn't.
Fixes: fb3bd914b3 ("x86/srso: Add a Speculative RAS Overflow mitigation")
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/299fb7740174d0f2335e91c58af0e9c242b4bac1.1693889988.git.jpoimboe@kernel.org
When doing Python programming it is a nice convention to insert the if
statement `if __name__ == "__main__":` before any main code that does
actual functionalities to ensure the code will be executed only as a
script rather than as an imported module. Hence attach the missing
judgement to show_delta.
Link: https://lkml.kernel.org/r/20231013132832.165768-1-2023002089@link.tyut.edu.cn
Signed-off-by: Hu Haowen <2023002089@link.tyut.edu.cn>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nicolas Schier <n.schier@avm.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There were some recent attempts [1] [2] to make the K: field less noisy
and its behavior more obvious. Ultimately, a shift in the default
behavior and an associated command line flag is the best choice.
Currently, K: will match keywords found in both patches and files.
Matching content from entire files is (while documented) not obvious
behavior and is usually not wanted by maintainers.
Now only patch content will be matched against unless --keywords-in-file
is also provided as an argument to get_maintainer.
Add the actual keyword matched to the role or rolestats as well.
For instance given the diff below that removes clang:
: diff --git a/drivers/hid/bpf/entrypoints/README b/drivers/hid/bpf/entrypoints/README
: index 147e0d41509f..f88eb19e8ef2 100644
: --- a/drivers/hid/bpf/entrypoints/README
: +++ b/drivers/hid/bpf/entrypoints/README
: @@ -1,4 +1,4 @@
: WARNING:
: If you change "entrypoints.bpf.c" do "make -j" in this directory to rebuild "entrypoints.skel.h".
: -Make sure to have clang 10 installed.
: +Make sure to have 10 installed.
: See Documentation/bpf/bpf_devel_QA.rst
The new role/rolestats output includes ":Keyword:\b(?i:clang|llvm)\b"
$ git diff drivers/hid/bpf/entrypoints/README | .scripts/get_maintainer.pl
Jiri Kosina <jikos@kernel.org> (maintainer:HID CORE LAYER,commit_signer:1/1=100%)
Benjamin Tissoires <benjamin.tissoires@redhat.com> (maintainer:HID CORE LAYER,commit_signer:1/1=100%,authored:1/1=100%,added_lines:4/4=100%)
Nathan Chancellor <nathan@kernel.org> (supporter:CLANG/LLVM BUILD SUPPORT:Keyword:\b(?i:clang|llvm)\b)
Nick Desaulniers <ndesaulniers@google.com> (supporter:CLANG/LLVM BUILD SUPPORT:Keyword:\b(?i:clang|llvm)\b)
Tom Rix <trix@redhat.com> (reviewer:CLANG/LLVM BUILD SUPPORT:Keyword:\b(?i:clang|llvm)\b)
Greg Kroah-Hartman <gregkh@linuxfoundation.org> (commit_signer:1/1=100%)
linux-input@vger.kernel.org (open list:HID CORE LAYER)
linux-kernel@vger.kernel.org (open list)
llvm@lists.linux.dev (open list:CLANG/LLVM BUILD SUPPORT:Keyword:\b(?i:clang|llvm)\b)
Link: https://lore.kernel.org/r/20231004-get_maintainer_change_k-v1-1-ac7ced18306a@google.com
Link: https://lore.kernel.org/all/20230928-get_maintainer_add_d-v2-0-8acb3f394571@google.com
Link: https://lore.kernel.org/all/3dca40b677dd2fef979a5a581a2db91df2c21801.camel@perches.com
Original-patch-by: Justin Stitt <justinstitt@google.com>
Link: https://lkml.kernel.org/r/01fe46f0c58aa8baf92156ae2bdccfb2bf0cb48e.camel@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Tested-by: Justin Stitt <justinstitt@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The first few lines of section_rel() and section_rela() are the same.
They both retrieve the index of the section to which the relocaton
applies, and skip known-good sections. This common code should be moved
to check_sec_ref().
Avoid ugly casts when computing 'start' and 'stop', and also make the
Elf_Rel and Elf_Rela pointers const.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
We can replace &elf->sechdrs[i] with &sechdrs[i] to slightly shorten
the code because we already have the local variable 'sechdrs'.
However, defining 'sechdr' instead shortens the code further.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
The current TO_NATIVE() has some limitations:
1) You cannot cast the argument.
2) You cannot pass a variable marked as 'const'.
3) Passing an array is a bug, but it is not detected.
Impelement TO_NATIVE() using bswap_*() functions. These are GNU
extensions. If we face portability issues, we can port the code from
include/uapi/linux/swab.h.
With this change, get_rel_type_and_sym() can be simplified by casting
the arguments directly.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
When MODULE_DEVICE_TABLE(ishtp, ) is built on a host with a different
endianness from the target architecture, it results in an incorrect
MODULE_ALIAS().
For example, see a case where drivers/platform/x86/intel/ishtp_eclite.c
is built as a module for x86.
If you build it on a little-endian host, you will get the correct
MODULE_ALIAS:
$ grep MODULE_ALIAS drivers/platform/x86/intel/ishtp_eclite.mod.c
MODULE_ALIAS("ishtp:{6A19CC4B-D760-4DE3-B14D-F25EBD0FBCD9}");
However, if you build it on a big-endian host, you will get a wrong
MODULE_ALIAS:
$ grep MODULE_ALIAS drivers/platform/x86/intel/ishtp_eclite.mod.c
MODULE_ALIAS("ishtp:{BD0FBCD9-F25E-B14D-4DE3-D7606A19CC4B}");
This issue has been unnoticed because the x86 kernel is most likely built
natively on an x86 host.
The guid field must not be reversed because guid_t is an array of __u8.
Fixes: fa443bc3c1 ("HID: intel-ish-hid: add support for MODULE_DEVICE_TABLE()")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
When MODULE_DEVICE_TABLE(tee, ) is built on a host with a different
endianness from the target architecture, it results in an incorrect
MODULE_ALIAS().
For example, see a case where drivers/char/hw_random/optee-rng.c
is built as a module for ARM little-endian.
If you build it on a little-endian host, you will get the correct
MODULE_ALIAS:
$ grep MODULE_ALIAS drivers/char/hw_random/optee-rng.mod.c
MODULE_ALIAS("tee:ab7a617c-b8e7-4d8f-8301-d09b61036b64*");
However, if you build it on a big-endian host, you will get a wrong
MODULE_ALIAS:
$ grep MODULE_ALIAS drivers/char/hw_random/optee-rng.mod.c
MODULE_ALIAS("tee:646b0361-9bd0-0183-8f4d-e7b87c617aab*");
The same problem also occurs when you enable CONFIG_CPU_BIG_ENDIAN,
and build it on a little-endian host.
This issue has been unnoticed because the ARM kernel is configured for
little-endian by default, and most likely built on a little-endian host
(cross-build on x86 or native-build on ARM).
The uuid field must not be reversed because uuid_t is an array of __u8.
Fixes: 0fc1db9d10 ("tee: add bus driver framework for TEE based devices")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
The generation of the kernel-devel package is disabled for binrpm-pkg
presumably because it was quite big (>= 200MB) and took a long time to
package.
Commit fe66b5d2ae ("kbuild: refactor kernel-devel RPM package and
linux-headers Deb package") reduced the package size to 12MB, and now
it is quick to build. It won't hurt to have binrpm-pkg generate it by
default.
If you want to skip the kernel-devel package generation, you can pass
RPMOPTS='--without devel':
$ make binrpm-pkg RPMOPTS='--without devel'
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
This is the next upgrade to the Rust toolchain, from 1.72.1 to 1.73.0
(i.e. the latest) [1].
See the upgrade policy [2] and the comments on the first upgrade in
commit 3ed03f4da0 ("rust: upgrade to Rust 1.68.2").
# Unstable features
No unstable features (that we use) were stabilized.
Therefore, the only unstable feature allowed to be used outside
the `kernel` crate is still `new_uninit`, though other code to be
upstreamed may increase the list.
Please see [3] for details.
# Required changes
For the upgrade, the following changes are required:
- Allow `internal_features` for `feature(compiler_builtins)` since
now Rust warns about using internal compiler and standard library
features (similar to how it also warns about incomplete ones) [4].
- A cleanup for a documentation link thanks to a new `rustdoc` lint.
See previous commits for details.
- A need to make an intra-doc link to a macro explicit, due to a
change in behavior in `rustdoc`. See previous commits for details.
# `alloc` upgrade and reviewing
The vast majority of changes are due to our `alloc` fork being upgraded
at once.
There are two kinds of changes to be aware of: the ones coming from
upstream, which we should follow as closely as possible, and the updates
needed in our added fallible APIs to keep them matching the newer
infallible APIs coming from upstream.
Instead of taking a look at the diff of this patch, an alternative
approach is reviewing a diff of the changes between upstream `alloc` and
the kernel's. This allows to easily inspect the kernel additions only,
especially to check if the fallible methods we already have still match
the infallible ones in the new version coming from upstream.
Another approach is reviewing the changes introduced in the additions in
the kernel fork between the two versions. This is useful to spot
potentially unintended changes to our additions.
To apply these approaches, one may follow steps similar to the following
to generate a pair of patches that show the differences between upstream
Rust and the kernel (for the subset of `alloc` we use) before and after
applying this patch:
# Get the difference with respect to the old version.
git -C rust checkout $(linux/scripts/min-tool-version.sh rustc)
git -C linux ls-tree -r --name-only HEAD -- rust/alloc |
cut -d/ -f3- |
grep -Fv README.md |
xargs -IPATH cp rust/library/alloc/src/PATH linux/rust/alloc/PATH
git -C linux diff --patch-with-stat --summary -R > old.patch
git -C linux restore rust/alloc
# Apply this patch.
git -C linux am rust-upgrade.patch
# Get the difference with respect to the new version.
git -C rust checkout $(linux/scripts/min-tool-version.sh rustc)
git -C linux ls-tree -r --name-only HEAD -- rust/alloc |
cut -d/ -f3- |
grep -Fv README.md |
xargs -IPATH cp rust/library/alloc/src/PATH linux/rust/alloc/PATH
git -C linux diff --patch-with-stat --summary -R > new.patch
git -C linux restore rust/alloc
Now one may check the `new.patch` to take a look at the additions (first
approach) or at the difference between those two patches (second
approach). For the latter, a side-by-side tool is recommended.
Link: https://github.com/rust-lang/rust/blob/stable/RELEASES.md#version-1730-2023-10-05 [1]
Link: https://rust-for-linux.com/rust-version-policy [2]
Link: https://github.com/Rust-for-Linux/linux/issues/2 [3]
Link: https://github.com/rust-lang/compiler-team/issues/596 [4]
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20231005210556.466856-4-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Currently, rustc defaults to invoking `cc`, even if `HOSTCC` is defined,
resulting in build failures in hermetic environments where `cc` does not
exist. This includes both hostprogs and proc-macros.
Since we are setting the linker to `HOSTCC`, we set the linker flavor to
`gcc` explicitly. The linker-flavor selects both which linker to search
for if the linker is unset, and which kind of linker flags to pass.
Without this flag, `rustc` would attempt to determine which flags to
pass based on the name of the binary passed as `HOSTCC`. `gcc` is the
name of the linker-flavor used by `rustc` for all C compilers, including
both `gcc` and `clang`.
Signed-off-by: Matthew Maurer <mmaurer@google.com>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Tested-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Add a -checks argument to allow the checks passed to the clang-tool to
be set on the command line.
Add a pass through -header-filter option.
Don't run analysis on non-C or CPP files.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: llvm@lists.linux.dev
Cc: Ming Wang <wangming01@loongson.cn>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Tom Rix <trix@redhat.com>
Cc: bpf@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-perf-users@vger.kernel.org
Link: https://lore.kernel.org/r/20231009183920.200859-4-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Make the output more stable and deterministic.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: llvm@lists.linux.dev
Cc: Ming Wang <wangming01@loongson.cn>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Tom Rix <trix@redhat.com>
Cc: bpf@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-perf-users@vger.kernel.org
Link: https://lore.kernel.org/r/20231009183920.200859-3-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Builds in tools still use the cmd_ prefix in .cmd files, so don't
require the saved part. Name the groups in the line pattern match so
that changing the regular expression is more robust and works with the
addition of a new match group.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: llvm@lists.linux.dev
Cc: Ming Wang <wangming01@loongson.cn>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Tom Rix <trix@redhat.com>
Cc: bpf@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-perf-users@vger.kernel.org
Link: https://lore.kernel.org/r/20231009183920.200859-2-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Provide the generic sync_try_cmpxchg() function from the
raw_ prefixed version, also adding explicit instrumentation.
The patch amends existing scripts to generate sync_try_cmpxchg()
locking primitive and its raw_sync_try_cmpxchg() fallback, while
leaving existing macros from the try_cmpxchg() family unchanged.
The target can define its own arch_sync_try_cmpxchg() to override the
generic version of raw_sync_try_cmpxchg(). This allows the target
to generate more optimal assembly than the generic version.
Additionally, the patch renames two scripts to better reflect
whet they really do.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org
This is the third upgrade to the Rust toolchain, from 1.71.1 to 1.72.1
(i.e. the latest) [1].
See the upgrade policy [2] and the comments on the first upgrade in
commit 3ed03f4da0 ("rust: upgrade to Rust 1.68.2").
# Unstable features
No unstable features (that we use) were stabilized.
Therefore, the only unstable feature allowed to be used outside
the `kernel` crate is still `new_uninit`, though other code to be
upstreamed may increase the list.
Please see [3] for details.
# Other improvements
Previously, the compiler could incorrectly generate a `.eh_frame`
section under `-Cpanic=abort`. We were hitting this bug when debug
assertions were enabled (`CONFIG_RUST_DEBUG_ASSERTIONS=y`) [4]:
LD .tmp_vmlinux.kallsyms1
ld.lld: error: <internal>:(.eh_frame) is being placed in '.eh_frame'
Gary fixed the issue in Rust 1.72.0 [5].
# Required changes
For the upgrade, the following changes are required:
- A call to `Box::from_raw` in `rust/kernel/sync/arc.rs` now requires
an explicit `drop()` call. See previous patch for details.
# `alloc` upgrade and reviewing
The vast majority of changes are due to our `alloc` fork being upgraded
at once.
There are two kinds of changes to be aware of: the ones coming from
upstream, which we should follow as closely as possible, and the updates
needed in our added fallible APIs to keep them matching the newer
infallible APIs coming from upstream.
Instead of taking a look at the diff of this patch, an alternative
approach is reviewing a diff of the changes between upstream `alloc` and
the kernel's. This allows to easily inspect the kernel additions only,
especially to check if the fallible methods we already have still match
the infallible ones in the new version coming from upstream.
Another approach is reviewing the changes introduced in the additions in
the kernel fork between the two versions. This is useful to spot
potentially unintended changes to our additions.
To apply these approaches, one may follow steps similar to the following
to generate a pair of patches that show the differences between upstream
Rust and the kernel (for the subset of `alloc` we use) before and after
applying this patch:
# Get the difference with respect to the old version.
git -C rust checkout $(linux/scripts/min-tool-version.sh rustc)
git -C linux ls-tree -r --name-only HEAD -- rust/alloc |
cut -d/ -f3- |
grep -Fv README.md |
xargs -IPATH cp rust/library/alloc/src/PATH linux/rust/alloc/PATH
git -C linux diff --patch-with-stat --summary -R > old.patch
git -C linux restore rust/alloc
# Apply this patch.
git -C linux am rust-upgrade.patch
# Get the difference with respect to the new version.
git -C rust checkout $(linux/scripts/min-tool-version.sh rustc)
git -C linux ls-tree -r --name-only HEAD -- rust/alloc |
cut -d/ -f3- |
grep -Fv README.md |
xargs -IPATH cp rust/library/alloc/src/PATH linux/rust/alloc/PATH
git -C linux diff --patch-with-stat --summary -R > new.patch
git -C linux restore rust/alloc
Now one may check the `new.patch` to take a look at the additions (first
approach) or at the difference between those two patches (second
approach). For the latter, a side-by-side tool is recommended.
Link: https://github.com/rust-lang/rust/blob/stable/RELEASES.md#version-1721-2023-09-19 [1]
Link: https://rust-for-linux.com/rust-version-policy [2]
Link: https://github.com/Rust-for-Linux/linux/issues/2 [3]
Closes: https://github.com/Rust-for-Linux/linux/issues/1012 [4]
Link: https://github.com/rust-lang/rust/pull/112403 [5]
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Björn Roy Baron <bjorn3_gh@protonmail.com>
Link: https://lore.kernel.org/r/20230823160244.188033-3-ojeda@kernel.org
[ Used 1.72.1 instead of .0 (no changes in `alloc`) and reworded
to mention that we hit the `.eh_frame` bug under debug assertions. ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
kernel.spec is the last piece that resides outside the rpmbuild/
directory. Move all the RPM-related files to rpmbuild/ consistently.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Modify modpost to use binary search for converting addresses back
into symbol references. Previously it used linear search.
This change saves a few seconds of wall time for defconfig builds,
but can save several minutes on allyesconfigs.
Before:
$ make LLVM=1 -j128 allyesconfig vmlinux -s KCFLAGS="-Wno-error"
$ time scripts/mod/modpost -M -m -a -N -o vmlinux.symvers vmlinux.o
198.38user 1.27system 3:19.71elapsed
After:
$ make LLVM=1 -j128 allyesconfig vmlinux -s KCFLAGS="-Wno-error"
$ time scripts/mod/modpost -M -m -a -N -o vmlinux.symvers vmlinux.o
11.91user 0.85system 0:12.78elapsed
Signed-off-by: Jack Brennen <jbrennen@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Since commit d8131c2965 ("kbuild: remove $(MODLIB)/source symlink"),
modules_install does not create the 'source' symlink.
Remove the stale code from builddeb and kernel.spec.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Drivers must not reference functions marked with __exit as these likely
are not available when the code is built-in.
There are few creative offenders uncovered for example in ARCH=amd64
allmodconfig builds. So only trigger the section mismatch warning for
W=1 builds.
The dual rule that drivers must not reference .init.* is implemented
since commit 0db2524523 ("modpost: don't allow *driver to reference
.init.*") which however missed that .exit.* should be handled in the
same way.
Thanks to Masahiro Yamada and Arnd Bergmann who gave valuable hints to
find this improvement.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Without this 'else' statement, an "usb" name goes into two handlers:
the first/previous 'if' statement _AND_ the for-loop over 'devtable',
but the latter is useless as it has no 'usb' device_id entry anyway.
Tested with allmodconfig before/after patch; no changes to *.mod.c:
git checkout v6.6-rc3
make -j$(nproc) allmodconfig
make -j$(nproc) olddefconfig
make -j$(nproc)
find . -name '*.mod.c' | cpio -pd /tmp/before
# apply patch
make -j$(nproc)
find . -name '*.mod.c' | cpio -pd /tmp/after
diff -r /tmp/before/ /tmp/after/
# no difference
Fixes: acbef7b766 ("modpost: fix module autoloading for OF devices with generic compatible property")
Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The main challenge with defining `work_struct` fields is making sure
that the function pointer stored in the `work_struct` is appropriate for
the work item type it is embedded in. It needs to know the offset of the
`work_struct` field being used (even if there are several!) so that it
can do a `container_of`, and it needs to know the type of the work item
so that it can call into the right user-provided code. All of this needs
to happen in a way that provides a safe API to the user, so that users
of the workqueue cannot mix up the function pointers.
There are three important pieces that are relevant when doing this:
* The pointer type.
* The work item struct. This is what the pointer points at.
* The `work_struct` field. This is a field of the work item struct.
This patch introduces a separate trait for each piece. The pointer type
is given a `WorkItemPointer` trait, which pointer types need to
implement to be usable with the workqueue. This trait will be
implemented for `Arc` and `Box` in a later patch in this patchset.
Implementing this trait is unsafe because this is where the
`container_of` operation happens, but user-code will not need to
implement it themselves.
The work item struct should then implement the `WorkItem` trait. This
trait is where user-code specifies what they want to happen when a work
item is executed. It also specifies what the correct pointer type is.
Finally, to make the work item struct know the offset of its
`work_struct` field, we use a trait called `HasWork<T, ID>`. If a type
implements this trait, then the type declares that, at the given offset,
there is a field of type `Work<T, ID>`. The trait is marked unsafe
because the OFFSET constant must be correct, but we provide an
`impl_has_work!` macro that can safely implement `HasWork<T>` on a type.
The macro expands to something that only compiles if the specified field
really has the type `Work<T>`. It is used like this:
```
struct MyWorkItem {
work_field: Work<MyWorkItem, 1>,
}
impl_has_work! {
impl HasWork<MyWorkItem, 1> for MyWorkItem { self.work_field }
}
```
Note that since the `Work` type is annotated with an id, you can have
several `work_struct` fields by using a different id for each one.
Co-developed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Andreas Hindborg <a.hindborg@samsung.com>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Kmod is now (since kmod commit 09c9f8c5df04 ("libkmod: Use kernel
decompression when available")) using the kernel decompressor, when
loading compressed modules.
However, the kernel XZ decompressor is XZ Embedded, which doesn't
handle CRC64 and dictionaries larger than 1MiB.
Use CRC32 and 1MiB dictionary when XZ compressing and installing
kernel modules.
Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1050582
Signed-off-by: Martin Nybo Andersen <tweek@tweek.dk>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
cc:stable.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZQ8hRwAKCRDdBJ7gKXxA
jlK9AQDzT/FUQV3kIshsV1IwAKFcg7gtcFSN0vs+pV+e1+4tbQD/Z2OgfGFFsCSP
X6uc2cYHc9DG5/o44iFgadW8byMssQs=
=w+St
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2023-09-23-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"13 hotfixes, 10 of which pertain to post-6.5 issues. The other three
are cc:stable"
* tag 'mm-hotfixes-stable-2023-09-23-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
proc: nommu: fix empty /proc/<pid>/maps
filemap: add filemap_map_order0_folio() to handle order0 folio
proc: nommu: /proc/<pid>/maps: release mmap read lock
mm: memcontrol: fix GFP_NOFS recursion in memory.high enforcement
pidfd: prevent a kernel-doc warning
argv_split: fix kernel-doc warnings
scatterlist: add missing function params to kernel-doc
selftests/proc: fixup proc-empty-vm test after KSM changes
revert "scripts/gdb/symbols: add specific ko module load command"
selftests: link libasan statically for tests with -fsanitize=address
task_work: add kerneldoc annotation for 'data' argument
mm: page_alloc: fix CMA and HIGHATOMIC landing on the wrong buddy list
sh: mm: re-add lost __ref to ioremap_prot() to fix modpost warning
Add a new flag, '--driver-match', to the dt-extract-compatibles script
that causes it to only print out compatibles that are expected to match
a driver. This output can then be used by tests to detect device probe
failures.
In order to filter the compatibles down to only ones that will match to
a driver, the following is considered:
- A compatible needs to show up in a driver's of_match_table for it to
be matched to a driver
- Compatibles that are used in both of_match_table and OF_DECLARE type
macros can't be expected to match to a driver and so are ignored.
One exception is CLK_OF_DECLARE_DRIVER, since it indicates that a
driver will also later probe, so compatibles in this macro are not
ignored.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20230828211424.2964562-3-nfraprado@collabora.com
Signed-off-by: Rob Herring <robh@kernel.org>
Since commit:
9257959a6e ("locking/atomic: scripts: restructure fallback ifdeffery")
The ordering fallbacks for atomic*_read_acquire() and
atomic*_set_release() erroneously fall back to the implictly relaxed
atomic*_read() and atomic*_set() variants respectively, without any
additional barriers. This loses the ACQUIRE and RELEASE ordering
semantics, which can result in a wide variety of problems, even on
strongly-ordered architectures where the implementation of
atomic*_read() and/or atomic*_set() allows the compiler to reorder those
relative to other accesses.
In practice this has been observed to break bit spinlocks on arm64,
resulting in dentry cache corruption.
The fallback logic was intended to allow ACQUIRE/RELEASE/RELAXED ops to
be defined in terms of FULL ops, but where an op had RELAXED ordering by
default, this unintentionally permitted the ACQUIRE/RELEASE ops to be
defined in terms of the implicitly RELAXED default.
This patch corrects the logic to avoid falling back to implicitly
RELAXED ops, resulting in the same behaviour as prior to commit
9257959a6e.
I've verified the resulting assembly on arm64 by generating outlined
wrappers of the atomics. Prior to this patch the compiler generates
sequences using relaxed load (LDR) and store (STR) instructions, e.g.
| <outlined_atomic64_read_acquire>:
| ldr x0, [x0]
| ret
|
| <outlined_atomic64_set_release>:
| str x1, [x0]
| ret
With this patch applied the compiler generates sequences using the
intended load-acquire (LDAR) and store-release (STLR) instructions, e.g.
| <outlined_atomic64_read_acquire>:
| ldar x0, [x0]
| ret
|
| <outlined_atomic64_set_release>:
| stlr x1, [x0]
| ret
To make sure that there were no other victims of the ifdeffery rewrite,
I generated outlined copies of all of the {atomic,atomic64,atomic_long}
atomic operations before and after commit 9257959a6e. A diff of
the generated assembly on arm64 shows that only the read_acquire() and
set_release() operations were changed, and only lost their intended
ordering:
| [mark@lakrids:~/src/linux]% diff -u \
| <(aarch64-linux-gnu-objdump -d before-9257959a6e5b4fca.o)
| <(aarch64-linux-gnu-objdump -d after-9257959a6e5b4fca.o)
| --- /proc/self/fd/11 2023-09-19 16:51:51.114779415 +0100
| +++ /proc/self/fd/16 2023-09-19 16:51:51.114779415 +0100
| @@ -1,5 +1,5 @@
|
| -before-9257959a6e5b4fca.o: file format elf64-littleaarch64
| +after-9257959a6e5b4fca.o: file format elf64-littleaarch64
|
|
| Disassembly of section .text:
| @@ -9,7 +9,7 @@
| 4: d65f03c0 ret
|
| 0000000000000008 <outlined_atomic_read_acquire>:
| - 8: 88dffc00 ldar w0, [x0]
| + 8: b9400000 ldr w0, [x0]
| c: d65f03c0 ret
|
| 0000000000000010 <outlined_atomic_set>:
| @@ -17,7 +17,7 @@
| 14: d65f03c0 ret
|
| 0000000000000018 <outlined_atomic_set_release>:
| - 18: 889ffc01 stlr w1, [x0]
| + 18: b9000001 str w1, [x0]
| 1c: d65f03c0 ret
|
| 0000000000000020 <outlined_atomic_add>:
| @@ -1230,7 +1230,7 @@
| 1070: d65f03c0 ret
|
| 0000000000001074 <outlined_atomic64_read_acquire>:
| - 1074: c8dffc00 ldar x0, [x0]
| + 1074: f9400000 ldr x0, [x0]
| 1078: d65f03c0 ret
|
| 000000000000107c <outlined_atomic64_set>:
| @@ -1238,7 +1238,7 @@
| 1080: d65f03c0 ret
|
| 0000000000001084 <outlined_atomic64_set_release>:
| - 1084: c89ffc01 stlr x1, [x0]
| + 1084: f9000001 str x1, [x0]
| 1088: d65f03c0 ret
|
| 000000000000108c <outlined_atomic64_add>:
| @@ -2427,7 +2427,7 @@
| 207c: d65f03c0 ret
|
| 0000000000002080 <outlined_atomic_long_read_acquire>:
| - 2080: c8dffc00 ldar x0, [x0]
| + 2080: f9400000 ldr x0, [x0]
| 2084: d65f03c0 ret
|
| 0000000000002088 <outlined_atomic_long_set>:
| @@ -2435,7 +2435,7 @@
| 208c: d65f03c0 ret
|
| 0000000000002090 <outlined_atomic_long_set_release>:
| - 2090: c89ffc01 stlr x1, [x0]
| + 2090: f9000001 str x1, [x0]
| 2094: d65f03c0 ret
|
| 0000000000002098 <outlined_atomic_long_add>:
I've build tested this with a variety of configs for alpha, arm, arm64,
csky, i386, m68k, microblaze, mips, nios2, openrisc, powerpc, riscv,
s390, sh, sparc, x86_64, and xtensa, for which I've seen no issues. I
was unable to build test for ia64 and parisc due to existing build
breakage in v6.6-rc2.
Fixes: 9257959a6e ("locking/atomic: scripts: restructure fallback ifdeffery")
Reported-by: Ming Lei <ming.lei@redhat.com>
Reported-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Baokun Li <libaokun1@huawei.com>
Link: https://lkml.kernel.org/r/20230919171430.2697727-1-mark.rutland@arm.com
Revert 11f956538c ("scripts/gdb/symbols: add specific ko module load
command") due to breakage identified by Johannes Berg in [1].
Fixes: 11f956538c ("scripts/gdb/symbols: add specific ko module load command")
Reported-by: Johannes Berg <johannes@sipsolutions.net>
Closes: https://lkml.kernel.org/r/c44b748307a074d0c250002cdcfe209b8cce93c9.camel@sipsolutions.net [1]
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Chinwen Chang <chinwen.chang@mediatek.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Qun-Wei Lin <qun-wei.lin@mediatek.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
- Fix kernel-devel RPM and linux-headers Deb package
- Fix too long argument list error in 'make modules_install'
-----BEGIN PGP SIGNATURE-----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=2LRy
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix kernel-devel RPM and linux-headers Deb package
- Fix too long argument list error in 'make modules_install'
* tag 'kbuild-fixes-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: avoid long argument lists in make modules_install
kbuild: fix kernel-devel RPM package and linux-headers Deb package
Running "make modules_install" may fail with
make[2]: execvp: /bin/sh: Argument list too long
if many modules are built and INSTALL_MOD_PATH is long. This is because
scripts/Makefile.modinst creates all directories with one mkdir command.
Use $(foreach ...) instead to prevent an excessive argument list.
Fixes: 2dfec887c0 ("kbuild: reduce the number of mkdir calls during modules_install")
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Since commit fe66b5d2ae ("kbuild: refactor kernel-devel RPM package
and linux-headers Deb package"), the kernel-devel RPM package and
linux-headers Deb package are broken.
I double-quoted the $(find ... -type d), which resulted in newlines
being included in the argument to the outer find comment.
find: 'arch/arm64/include\narch/arm64/kvm/hyp/include': No such file or directory
The outer find command is unneeded.
Fixes: fe66b5d2ae ("kbuild: refactor kernel-devel RPM package and linux-headers Deb package")
Reported-by: Karolis M <k4rolis@protonmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
The definition for single-argument kfree_rcu() has been removed,
so that any further attempt to use it will result in a build error.
Because of this build error, there is no longer any need for a special
check in checkpatch.pl.
Therefore, revert commit 1eacac3255.
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
* fix reference to exported symbols for parisc64 [Masahiro Yamada]
* Block-TLB (BTLB) support on 32-bit CPUs
* sparse and build-warning fixes
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZQDAAwAKCRD3ErUQojoP
X5wDAP4jxLxuVnUCpV5hUdFoJC5lkRM2LigbWDSfDQGHaycr0QD+NerBYX8Ejo6n
x0zHqqtBBe1fgU0QfRdwHeE7hlOiigI=
=FDci
-----END PGP SIGNATURE-----
Merge tag 'parisc-for-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture fixes from Helge Deller:
- fix reference to exported symbols for parisc64 [Masahiro Yamada]
- Block-TLB (BTLB) support on 32-bit CPUs
- sparse and build-warning fixes
* tag 'parisc-for-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
linux/export: fix reference to exported functions for parisc64
parisc: BTLB: Initialize BTLB tables at CPU startup
parisc: firmware: Simplify calling non-PA20 functions
parisc: BTLB: _edata symbol has to be page aligned for BTLB support
parisc: BTLB: Add BTLB insert and purge firmware function wrappers
parisc: BTLB: Clear possibly existing BTLB entries
parisc: Prepare for Block-TLB support on 32-bit kernel
parisc: shmparam.h: Document aliasing requirements of PA-RISC
parisc: irq: Make irq_stack_union static to avoid sparse warning
parisc: drivers: Fix sparse warning
parisc: iosapic.c: Fix sparse warnings
parisc: ccio-dma: Fix sparse warnings
parisc: sba-iommu: Fix sparse warnigs
parisc: sba: Fix compile warning wrt list of SBA devices
parisc: sba_iommu: Fix build warning if procfs if disabled
