Enable the second EHCI controller on the AST2600. Also add a line-name
for the GPIO that controls power to the USB port.
The power control is in place to allow the port to be disabled, for
those that are worried about rogue USB sticks.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Enable the second EHCI controller on the AST2600. Also add a line-name
for the GPIO that controls power to the USB port.
The power control is in place to allow the port to be disabled, for
those that are worried about rogue USB sticks.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Rainier uses the P10 processor so the OCC binding should reflect that.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Add the four SPI masters on each CFAM. Each master has four 128KB EEPROM
devices attached to it.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Adding pca9552 exposes the presence detect lines for the cards and
tca9554 exposes the presence details for the cards.
Signed-off-by: Jet Li <Jet.Li@ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Initial introduction of AMD EthanolX platform equipped with an
Aspeed ast2500 BMC manufactured by AMD.
AMD EthanolX platform is an AMD customer reference board with an
Aspeed ast2500 BMC manufactured by AMD.
This adds AMD EthanolX device tree file including the flash layout
used by EthanolX BMC machines.
Signed-off-by: Supreeth Venkatesh <supreeth.venkatesh@amd.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
We have a 4-bus mux whose output is selected by two GPIO inputs. Wire it
up in the devicetree and ensure the output is enabled by hogging the
appropriate line.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
- new board: WeTek Core2
- audio playback support on more boards
- add GPU DVFS
-----BEGIN PGP SIGNATURE-----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=ibOR
-----END PGP SIGNATURE-----
Merge tag 'amlogic-dt64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt
arm64: dts: amlogic: updates for v5.9 (round 2)
- new board: WeTek Core2
- audio playback support on more boards
- add GPU DVFS
* tag 'amlogic-dt64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
arm64: dts: amlogic: meson-g12: add the Mali OPP table and use DVFS
arm64: dts: amlogic: meson-gxm: add the Mali OPP table and use DVFS
arm64: dts: amlogic: meson-gx: add the Mali-450 OPP table and use DVFS
arm64: dts: meson: add support for the WeTek Core 2
dt-bindings: arm: amlogic: add support for the WeTek Core 2
arm64: dts: meson: add audio playback to khadas-vim3l
arm64: dts: meson: add audio playback to odroid-c4
arm64: dts: meson: update spifc node name on Khadas VIM3/VIM3L
ARM: dts: meson: Align L2 cache-controller nodename with dtschema
arm64: dts: meson-gxl-s805x: reduce initial Mali450 core frequency
arm64: dts: meson: add missing gxl rng clock
soc: amlogic: meson-gx-socinfo: Fix S905X3 and S905D3 ID's
Link: https://lore.kernel.org/r/7h8sf8671u.fsf@baylibre.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Fix the reg-init PHY for the dlink-dns327l (Armada 370)
- Replace HTTP links with HTTPS one in device tree of the Excito
Bubba B3 (Kirkwood)
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCXxqh0gAKCRALBhiOFHI7
1R9KAJ0TuEHE0boReOUAhpAlfYIqYeR5QQCfUuD/p2aoTSfNNyctLQsHmnjBYao=
=PzgE
-----END PGP SIGNATURE-----
Merge tag 'mvebu-dt-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/dt
mvebu dt for 5.9 (part 1)
- Fix the reg-init PHY for the dlink-dns327l (Armada 370)
- Replace HTTP links with HTTPS one in device tree of the Excito
Bubba B3 (Kirkwood)
* tag 'mvebu-dt-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
ARM: dts: dlink-dns327l: fix reg-init PHY
ARM: dts: kirkwood: Replace HTTP links with HTTPS ones
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable pwm_tacho device for fan control and monitoring in Wedge40.
Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Enable ADC controller and corresponding voltage sensoring channels for
Wedge40.
Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Disable i2c bus #9, #10 and #13 as these i2c controllers are not used on
Wedge40.
Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Create all the i2c switches in device tree and use aliases to assign
child channels with consistent bus numbers.
Besides, "i2c-mux-idle-disconnect" is set for all the i2c switches to
avoid potential conflicts when multiple devices (beind the switches)
use the same device address.
Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
The GPIO on Q0 is used for resetting the CFAM of the processor that the
ASPEED master is connected to.
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
The GPIO on Q0 is used for resetting the CFAM of the processor that the
ASPEED master is connected to.
The signal is wired as active high on the first pass systems.
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
SOM and it's Rock Pi N8 icarnation. This brings some arm64 dts-changes
with it as the underlying Dalang carrier board is shared by both
an arm32 rk3288 SOM and an arm64 rk3399 SOM (Rock Pi N10).
Other than that rk3288 gets its ohci node added that only works
on the fixed rk3288w variant of the soc and some asorted fixes
and improvements for dt-binding-check.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAl8YzOAQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgY9aB/0folCAovUA97bILQR/62PspVGR1i/S2GJe
sQqKuWDyBtJNM3IYNVMd/AtcrP+U0ZD4MX6TKbabs+ZuIc4EksXRroMTMm2azme1
rOrQuGSKcdhPobJOHlpbSC/QPWWi5GGGWDnwXY8T68NedeYLP/o8sOmZQtUi80R9
ueP5ZwiviwMrVzRITPb8sB89WEyRqaas2H0fc/4OjGRY/jeTKwCk9sP/JytA6gUB
/GXn+uUk5WcRkekujBi1LVi4BIhm7PMW9kM1AHWAV6+2Yd8uFyG4ut9MB7SmaQt8
QfEoPpLvQicpZCVB3VFOPJ38z4YuOXsqo85u8T3ZkgpLdInoa/J9
=GUhq
-----END PGP SIGNATURE-----
Merge tag 'v5.9-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt
Biggest part is the addition of the rk3288 variant of the VMARC
SOM and it's Rock Pi N8 icarnation. This brings some arm64 dts-changes
with it as the underlying Dalang carrier board is shared by both
an arm32 rk3288 SOM and an arm64 rk3399 SOM (Rock Pi N10).
Other than that rk3288 gets its ohci node added that only works
on the fixed rk3288w variant of the soc and some asorted fixes
and improvements for dt-binding-check.
* tag 'v5.9-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: Add PCIe for RockPI N10
ARM: dts: rockchip: Add HDMI out for RockPI N8/N10
ARM: dts: rockchip: Add USB for RockPI N8/N10
ARM: dts: rockchip: Add usb host0 ohci node for rk3288
ARM: dts: rockchip: Fix VBUS on rk3288-vyasa
ARM: dts: rockchip: Add Radxa Rock Pi N8 initial support
ARM: dts: rockchip: Add VMARC RK3288 SOM initial support
dt-bindings: arm: rockchip: Add Rock Pi N8 binding
arm64: dts: rk3399pro: vmarc-som: Move common properties into Carrier
arm64: dts: rk3399pro: vmarc-som: Move supply regulators into Carrier
arm64: dts: rk3399pro: vmarc-som: Fix sorting nodes, properties
ARM: dts: rockchip: dalang-carrier: Move i2c nodes into SOM
ARM: dts: rockchip: Add 'arm,pl330-periph-burst' for dmac
ARM: dts: rockchip: Add marvell BT irq config
ARM: dts: rockchip: rename label and nodename pinctrl subnodes that end with gpio
Link: https://lore.kernel.org/r/2472314.kD9Egx1jfM@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This enables the audio SRAM, DMA engine, I2S interface, and codec, hooks
them together and adds a audio-graph-card instance.
It also removes the jack gpios from the gpio-keys instance, because the
audio jack driver registers an input device.
Link: https://lore.kernel.org/r/20200718205019.184927-10-lkundrak@v3.sk
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This memory is region is where the two-channel audio DMA can pump sound
samples into the SSPA's internal FIFO.
Link: https://lore.kernel.org/r/20200718205019.184927-6-lkundrak@v3.sk
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The ACGR register is at the offset of 0x1024, beyond the 4k originally
assigned to the MPMU range.
Link: https://lore.kernel.org/r/20200718205019.184927-5-lkundrak@v3.sk
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The power management unit, described by the soc_clocks node, controls the
power to the peripherals by the means of power domains with a single
cell -- the domain number.
Link: https://lore.kernel.org/r/20200718205019.184927-4-lkundrak@v3.sk
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
On the XO-1.75, this node represents a bus interface that operates in slave
mode and thus is only able to accommodate a single subnode; no address
cells are necessary.
The Documentation/devicetree/bindings/spi/spi-controller.yaml binding
prefers that we drop the property instead of setting it to zero.
This fixes a DT validation error:
arch/arm/boot/dts/mmp2-olpc-xo-1-75.dt.yaml: spi@d4037000:
{ ... } is valid under each of {'required': ['spi-slave']},
{'required': ['#address-cells']}
We also need to drop #size-cells:
arch/arm/boot/dts/mmp2-olpc-xo-1-75.dt.yaml: spi@d4037000:
'#address-cells' is a dependency of '#size-cells'
Link: https://lore.kernel.org/r/20200718205019.184927-3-lkundrak@v3.sk
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
mmp2-olpc-xo-1-75.dt.yaml: camera_i2c: $nodename:0:
'camera_i2c' does not match '^i2c(@.*)?'
mmp2-olpc-xo-1-75.dt.yaml: camera_i2c: 'sda-gpios' is a required property
mmp2-olpc-xo-1-75.dt.yaml: camera_i2c: 'scl-gpios' is a required property
The "gpios" property actually was documented as deprecated, but got dropped
in commit 0175ce4a58 ("dt-bindings: i2c: Convert i2c-gpio binding to
json-schema"). It's probably best kept forgotten though.
Link: https://lore.kernel.org/r/20200718205019.184927-2-lkundrak@v3.sk
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Highlights:
----------
MCU part:
-Enable stmpe811 on stm32f429
-Enable l3gd20-gyro on stm32f429
-Enable panel-ilitek-9341 on stm32f429
-Fixes for yaml validation (leds, nodes names,
remove useless bindings ...)
-Add stm32xxx compatibles for syscon nodes
MPU part:
-Add support for usb role switch to dwc2
-Add stm32xxx compatibles for syscon nodes
-Update uart4 pin configuration for low power mode
used by dkx and ed1 ST boards
-Fix uart nodes ordering and uart7_pins_a comments
-Add the support of uart instances available on STM32MP157 boards:
- usart3 on stm32mp157c-ev1, stm32mp157a-dk1, and stm32mp157c-dk2
- uart7 on stm32mp157a-dk1 and stm32mp157c-dk2
- usart2 on stm32mp157c-dk2
-Configure I2C5 on stm32mp15 DK boards
-----BEGIN PGP SIGNATURE-----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=ga5j
-----END PGP SIGNATURE-----
Merge tag 'stm32-dt-for-v5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt
STM32 DT updates for v5.9, round 1
Highlights:
----------
MCU part:
-Enable stmpe811 on stm32f429
-Enable l3gd20-gyro on stm32f429
-Enable panel-ilitek-9341 on stm32f429
-Fixes for yaml validation (leds, nodes names,
remove useless bindings ...)
-Add stm32xxx compatibles for syscon nodes
MPU part:
-Add support for usb role switch to dwc2
-Add stm32xxx compatibles for syscon nodes
-Update uart4 pin configuration for low power mode
used by dkx and ed1 ST boards
-Fix uart nodes ordering and uart7_pins_a comments
-Add the support of uart instances available on STM32MP157 boards:
- usart3 on stm32mp157c-ev1, stm32mp157a-dk1, and stm32mp157c-dk2
- uart7 on stm32mp157a-dk1 and stm32mp157c-dk2
- usart2 on stm32mp157c-dk2
-Configure I2C5 on stm32mp15 DK boards
* tag 'stm32-dt-for-v5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (38 commits)
ARM: dts: stm32: enable usb-role-switch on USB OTG on stm32mp15xx-dkx
ARM: dts: stm32: Add compatibles for syscon for stm32mp151
ARM: dts: stm32: Add compatibles for syscon for stm32h743
ARM: dts: stm32: Add compatibles for syscon for stm32f746
ARM: dts: stm32: Add compatibles for syscon for stm32f426
dt-bindings: arm: stm32: Add compatibles for syscon nodes
ARM: dts: stm32: Fix spi4 pins in stm32mp15-pinctrl
ARM: dts: stm32: configure i2c5 support on stm32mp15xx-dkx
ARM: dts: stm32: add usart2 node to stm32mp157c-dk2
ARM: dts: stm32: add uart7 support to stm32mp15xx-dkx boards
ARM: dts: stm32: add usart3 node to stm32mp157c-ev1
ARM: dts: stm32: add usart3 node to stm32mp15xx-dkx boards
ARM: dts: stm32: add usart2, usart3 and uart7 pins in stm32mp15-pinctrl
ARM: dts: stm32: cosmetic updates in stm32mp15-pinctrl
ARM: dts: stm32: fix uart7_pins_a comments in stm32mp15-pinctrl
ARM: dts: stm32: fix uart nodes ordering in stm32mp15-pinctrl
ARM: dts: stm32: Update UART4 pin states on stm32mp15xx-dkx
ARM: dts: stm32: Update pin states for uart4 on stm32mp157c-ed1
ARM: dts: stm32: update uart4 pin configuration for low power on stm32mp157
dt-bindings: usb: dwc2: Fix issues for stm32mp15x SoC
...
Link: https://lore.kernel.org/r/8a9bb27b-fc08-126a-11f7-01354e8577e1@st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
1. Enable Bluetooth on Artik5 (Exynos3250).
2. Enable accelerometer on Aries boards (Samsung Galaxy S family,
S5Pv210); multiple fixes.
3. Fix highest frequencies on Exynos5800.
4. Fix rare USB instability on Odroid XU3 family (Exynos5422).
5. Minor DTS fixes and adjustments with dtschema.
-----BEGIN PGP SIGNATURE-----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=k3pO
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM changes for v5.9
1. Enable Bluetooth on Artik5 (Exynos3250).
2. Enable accelerometer on Aries boards (Samsung Galaxy S family,
S5Pv210); multiple fixes.
3. Fix highest frequencies on Exynos5800.
4. Fix rare USB instability on Odroid XU3 family (Exynos5422).
5. Minor DTS fixes and adjustments with dtschema.
* tag 'samsung-dt-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos: Replace HTTP links with HTTPS ones
ARM: dts: exynos: Disable frequency scaling for FSYS bus on Odroid XU3 family
ARM: dts: exynos: Define fixed regulators in root node for consistency in SMDK5420
ARM: dts: exynos: Define fixed regulators in root node for consistency in Arndale
ARM: dts: exynos: Define fixed regulators in root node for consistency in Origen
ARM: dts: exynos: Remove DMA controller bus node name to fix dtschema warnings
ARM: dts: exynos: Fix missing empty reg/ranges property regulators on Trats
ARM: dts: exynos: Align L2 cache-controller nodename with dtschema
ARM: dts: s5pv210: Correct BCM4329 bluetooth node
ARM: dts: s5pv210: Add BMA023 accelerometer support to Aries
ARM: dts: s5pv210: Add support for GP2A light sensor on Aries
ARM: dts: s5pv210: Correct fuelgauge definition on Aries
ARM: dts: s5pv210: Add interrupt-controller property to gph3
ARM: dts: exynos: Enable Bluetooth support for Artik5 board
ARM: dts: exynos: Extend all Exynos5800 A15's OPPs with max voltage data
Link: https://lore.kernel.org/r/20200721180900.13844-2-krzk@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add QFPROM and ethernet for ipq8064 and a new DTS for the MikroTik
RB3011 using the same platform.
-----BEGIN PGP SIGNATURE-----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=wWXD
-----END PGP SIGNATURE-----
Merge tag 'qcom-dts-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
Qualcomm ARM dts updates for v5.9
Add QFPROM and ethernet for ipq8064 and a new DTS for the MikroTik
RB3011 using the same platform.
* tag 'qcom-dts-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: dts: qcom: add qfprom definition to ipq806x
ARM: dts: qcom: Add MikroTik RB3011
ARM: dts: qcom: add ethernet definitions to ipq8064
Link: https://lore.kernel.org/r/20200721045032.3430395-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
support, including:
- CPUFreq / Thermal throttling support for the H5
- Touchscreen support for the Pinephone
- New boards: PinePhone v1.2
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXxWlZAAKCRDj7w1vZxhR
xft/AQCaR2CkyOVyK32yPUX0ZF2nS+LYzalJIUpOuLhy37GQVwEA+vlQTa7fKdtW
4IX58peBkRD8FwTszrwR/tImDPd8Rwg=
=z8pA
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt-for-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt
Our usual number of patches to improve the Allwinner Device Tree
support, including:
- CPUFreq / Thermal throttling support for the H5
- Touchscreen support for the Pinephone
- New boards: PinePhone v1.2
* tag 'sunxi-dt-for-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: h5: bananapi-m2-plus-v1.2: Tie in CPU OPPs
arm64: dts: allwinner: h5: libretech-all-h3-cc: Tie in CPU OPPs
arm64: dts: allwinner: h5: Add CPU Operating Performance Points table
arm64: dts: allwinner: h5: Add trip and cooling maps to CPU thermal zones
arm64: dts: allwinner: h5: Add clock to CPU cores
ARM: dts: sunxi: bananapi-m2-plus-v1.2: Fix CPU supply voltages
ARM: dts: sunxi: bananapi-m2-plus-v1.2: Add regulator supply to all CPU cores
ARM: dts: sunxi: libretech-all-h3-cc: Add regulator supply to all CPU cores
arm64: dts: sun50i-pinephone: dldo4 must not be >= 1.8V
arm64: dts: allwinner: Add support for PinePhone revision 1.2
dt-bindings: arm: sunxi: Add PinePhone 1.2 bindings
arm64: dts: sun50i-a64-pinephone: Add touchscreen support
arm64: dts: sun50i-a64-pinephone: Enable LCD support on PinePhone
ARM: dts: orange-pi-zero-plus2: add leds configuration
ARM: dts: orange-pi-zero-plus2: enable USB OTG port
Link: https://lore.kernel.org/r/fa48ffcb-3404-41bb-b065-a16717cf5688.lettre@localhost
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
just a single patch fixing up the node names for schema.
-----BEGIN PGP SIGNATURE-----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=xBG2
-----END PGP SIGNATURE-----
Merge tag 'versatile-for-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into arm/dt
Versatile DTS changes for the v5.9 kernel cycle, essentially
just a single patch fixing up the node names for schema.
* tag 'versatile-for-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
ARM: dts: arm-realview: Align L2 cache-controller nodename with dtschema
Link: https://lore.kernel.org/r/CACRpkdbkM9ZmuG2FnBmO7upcJfnqq2oSLDCFDXC5b3K+dtps9Q@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- New board support: Protonic PRTI6Q/WD2/VT7/RVT and MYiR MYS-6ULX SBC.
- Update IIM, OCOTP and SD/MMC device node name to match .yaml bindings.
- Make tempmon node as child of anatop node according to hardware
architecture.
- The vf610-zii device update: configure fiber port to 1000BaseX, add
switch watchdog, MDIO speed and preamble.
- A series from Fabio Estevam to update imx6qdl-sabresd and
imx6q-tbs2910 for using MDIO node and reset-assert-us.
- Align L2 cache-controller device node name with .yaml schema.
- Enable SATA support for imx6qp-sabreauto and imx6qp-sabresd board.
- A series of patches from Shengjiu Wang to enable various audio
support on i.MX6 devices.
- Add Gateworks System Controller support for imx6qdl-gw devices.
- Change default #pwm-cells setting to <3> in the SoC dtsi files.
- Other small random changes.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAl8VVgcUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM7azwf+KzAukegArKtAmsbAnYNKYztXXifW
6Hc3+hv2mfUtsGfHPSUJJ5MhEW52xAbcXnYETUkmoWe1W1zIxrNNWvBUm4nPF5os
0cO8tjk4cE4CYDnsl8sBSqT55sd3ke61I+j9q0NAQNyX9OlmZ3kfm8yw0yIsxTKp
/FzoLmOeRzhVKHdZczuJ9Ts4kFyf3XtQrrN1UTbu715KdIbbsrJtXQ74ADBCnjfX
8RUm3Y5XIaPcF4z2U8reMsbHCF120ENIfGwFRNo/Odx+1OVo1IrDB1+f/SP9ZP0T
6+iKvfSS4RavzB1tvLdJ2/911t7qtqsneU33kwQKL0wrFZsT4ih42uBfpw==
=1hHY
-----END PGP SIGNATURE-----
Merge tag 'imx-dt-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX device tree update for 5.9:
- New board support: Protonic PRTI6Q/WD2/VT7/RVT and MYiR MYS-6ULX SBC.
- Update IIM, OCOTP and SD/MMC device node name to match .yaml bindings.
- Make tempmon node as child of anatop node according to hardware
architecture.
- The vf610-zii device update: configure fiber port to 1000BaseX, add
switch watchdog, MDIO speed and preamble.
- A series from Fabio Estevam to update imx6qdl-sabresd and
imx6q-tbs2910 for using MDIO node and reset-assert-us.
- Align L2 cache-controller device node name with .yaml schema.
- Enable SATA support for imx6qp-sabreauto and imx6qp-sabresd board.
- A series of patches from Shengjiu Wang to enable various audio
support on i.MX6 devices.
- Add Gateworks System Controller support for imx6qdl-gw devices.
- Change default #pwm-cells setting to <3> in the SoC dtsi files.
- Other small random changes.
* tag 'imx-dt-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (43 commits)
ARM: dts: vf610-zii-ssmb-spu3: Add node for switch watchdog
ARM: dts: vf610-zii-ssmb-dtu: Add no-sdio/no-sd properties
ARM: dts: imx6q-tbs2910: Pass reset-assert-us
ARM: dts: imx6q-tbs2910: Add an mdio node
ARM: dts: imx6qdl-sabresd: Pass reset-assert-us
ARM: dts: imx6qdl-sabresd: Add an mdio node
ARM: dts: imx6qdl-gw: add Gateworks System Controller support
ARM: dts: imx6ull: add MYiR MYS-6ULX SBC
ARM: dts: vf610-zii-spb4: Add node for switch watchdog
ARM: dts: colibri-imx6: remove pinctrl-names orphan
ARM: dts: imx: default to #pwm-cells = <3> in the SoC dtsi files
ARM: dts: vf610-zii-scu4-aib: Configure fibre ports to 1000BaseX
ARM: dts: vf610-zii-dev-rev-c: Configure fiber port to 1000BaseX
ARM: dts: ZII: update MDIO speed and preamble
ARM: dts: vfxxx: Add node for CAAM
ARM: dts: imx6qp-sabresd: enable sata
ARM: dts: imx6qp-sabreauto: enable sata
ARM: dts: add Protonic RVT board
ARM: dts: add Protonic VT7 board
ARM: dts: add Protonic WD2 board
...
Link: https://lore.kernel.org/r/20200720085536.24138-3-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This patch adds support to enable HDMI out for
N10 and N8 combinations SBCs.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com>
Link: https://lore.kernel.org/r/20200720110230.367985-2-jagan@amarulasolutions.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Radxa dalang carrier board has 2x USB 2.0 and 1x USB 3.0
ports.
This patch adds support to enable all these USB ports for
N10 and N8 combinations SBCs.
Note that the USB 3.0 port on RockPI N8 combination works
as USB 2.0 OTG since it is driven from RK3288.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Link: https://lore.kernel.org/r/20200720110230.367985-1-jagan@amarulasolutions.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
rk3288 and rk3288w have a usb host0 ohci controller.
Although rk3288 ohci doesn't actually work on hardware, but
rk3288w ohci can work well.
So add usb host0 ohci node in rk3288 dtsi and boards
can then enable it if supported.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Cc: William Wu <william.wu@rock-chips.com>
Link: https://lore.kernel.org/r/20200720105846.367776-1-jagan@amarulasolutions.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Now that USB OTG driver supports usb role switch by overriding PHY input
signals (A-Valid, B-Valid and Vbus-Valid), enable it on stm32mp15xx-dkx.
dr_mode needn't to be forced to Peripheral anymore, it is set to OTG in
SoC device tree.
USB role (USB_ROLE_NONE, USB_ROLE_DEVICE, USB_ROLE_HOST) will be provided
by STUSB1600 Type-C controller driver.
This patch depends on "Add STUSB160x Type-C port controller support"
series, which is under review.
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Syscon nodes needs at least 2 compatibles to be compliant why yaml documentation.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Syscon nodes needs at least 2 compatibles to be compliant why yaml documentation.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Syscon nodes needs at least 2 compatibles to be compliant why yaml documentation.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Syscon nodes needs at least 2 compatibles to be compliant why yaml documentation.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
