scsi_dma_map() was reporting a failure during boot on an AMD machine
with the IOMMU enabled.
scsi_dma_map failed: request for 36 bytes!
The issue was tracked down to a mistake in logic: should not return
an error if iommu_deferred_attach() returns zero.
Reported-by: Marshall Midden <marshallmidden@gmail.com>
Fixes: dabb16f672 ("iommu/dma: return error code from iommu_dma_map_sg()")
Link: https://lore.kernel.org/all/CAD2CkAWjS8=kKwEEN4cgVNjyFORUibzEiCUA-X+SMtbo0JoMmA@mail.gmail.com
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20211027174757.119755-1-logang@deltatee.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Pass the non-aligned size to __iommu_dma_map when using swiotlb bounce
buffers in iommu_dma_map_page, to account for min_align_mask.
To deal with granule alignment, __iommu_dma_map maps iova_align(size +
iova_off) bytes starting at phys - iova_off. If iommu_dma_map_page
passes aligned size when using swiotlb, then this becomes
iova_align(iova_align(orig_size) + iova_off). Normally iova_off will be
zero when using swiotlb. However, this is not the case for devices that
set min_align_mask. When iova_off is non-zero, __iommu_dma_map ends up
mapping an extra page at the end of the buffer. Beyond just being a
security issue, the extra page is not cleaned up by __iommu_dma_unmap.
This causes problems when the IOVA is reused, due to collisions in the
iommu driver. Just passing the original size is sufficient, since
__iommu_dma_map will take care of granule alignment.
Fixes: 1f221a0d0d ("swiotlb: respect min_align_mask")
Signed-off-by: David Stevens <stevensd@chromium.org>
Link: https://lore.kernel.org/r/20210929023300.335969-8-stevensd@google.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Add an argument to swiotlb_tbl_map_single that specifies the desired
alignment of the allocated buffer. This is used by dma-iommu to ensure
the buffer is aligned to the iova granule size when using swiotlb with
untrusted sub-granule mappings. This addresses an issue where adjacent
slots could be exposed to the untrusted device if IO_TLB_SIZE < iova
granule < PAGE_SIZE.
Signed-off-by: David Stevens <stevensd@chromium.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210929023300.335969-7-stevensd@google.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Introduce a new dev_use_swiotlb function to guard swiotlb code, instead
of overloading dev_is_untrusted. This allows CONFIG_SWIOTLB to be
checked more broadly, so the swiotlb related code can be removed more
aggressively.
Signed-off-by: David Stevens <stevensd@chromium.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210929023300.335969-6-stevensd@google.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Fold the _swiotlb helper functions into the respective _page functions,
since recent fixes have moved all logic from the _page functions to the
_swiotlb functions.
Signed-off-by: David Stevens <stevensd@chromium.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20210929023300.335969-5-stevensd@google.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Calling the iommu_dma_sync_*_for_cpu functions during unmap can cause
two copies out of the swiotlb buffer. Do the arch sync directly in
__iommu_dma_unmap_swiotlb instead to avoid this. This makes the call to
iommu_dma_sync_sg_for_cpu for untrusted devices in iommu_dma_unmap_sg no
longer necessary, so move that invocation later in the function.
Signed-off-by: David Stevens <stevensd@chromium.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20210929023300.335969-4-stevensd@google.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When calling arch_sync_dma, we need to pass it the memory that's
actually being used for dma. When using swiotlb bounce buffers, this is
the bounce buffer. Move arch_sync_dma into the __iommu_dma_map_swiotlb
helper, so it can use the bounce buffer address if necessary.
Now that iommu_dma_map_sg delegates to a function which takes care of
architectural syncing in the untrusted device case, the call to
iommu_dma_sync_sg_for_device can be moved so it only occurs for trusted
devices. Doing the sync for untrusted devices before mapping never
really worked, since it needs to be able to target swiotlb buffers.
This also moves the architectural sync to before the call to
__iommu_dma_map, to guarantee that untrusted devices can't see stale
data they shouldn't see.
Fixes: 82612d66d5 ("iommu: Allow the iommu/dma api to use bounce buffers")
Signed-off-by: David Stevens <stevensd@chromium.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20210929023300.335969-3-stevensd@google.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The is_swiotlb_buffer function takes the physical address of the swiotlb
buffer, not the physical address of the original buffer. The sglist
contains the physical addresses of the original buffer, so for the
sync_sg functions to work properly when a bounce buffer might have been
used, we need to use iommu_iova_to_phys to look up the physical address.
This is what sync_single does, so call that function on each sglist
segment.
The previous code mostly worked because swiotlb does the transfer on map
and unmap. However, any callers which use DMA_ATTR_SKIP_CPU_SYNC with
sglists or which call sync_sg would not have had anything copied to the
bounce buffer.
Fixes: 82612d66d5 ("iommu: Allow the iommu/dma api to use bounce buffers")
Signed-off-by: David Stevens <stevensd@chromium.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210929023300.335969-2-stevensd@google.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
IOVA cookies are now got and put by core code, so we no longer need to
export these to modular drivers. The export for getting MSI cookies
stays, since VFIO can still be a module, but it was already relying on
someone else putting them, so that aspect is unaffected.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/ef89db54a27df7d8bc0af094c7d7b204fd61774c.1631531973.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Including:
- New DART IOMMU driver for Apple Silicon M1 chips.
- Optimizations for iommu_[map/unmap] performance
- Selective TLB flush support for the AMD IOMMU driver to make
it more efficient on emulated IOMMUs.
- Rework IOVA setup and default domain type setting to move more
code out of IOMMU drivers and to support runtime switching
between certain types of default domains.
- VT-d Updates from Lu Baolu:
- Update the virtual command related registers
- Enable Intel IOMMU scalable mode by default
- Preset A/D bits for user space DMA usage
- Allow devices to have more than 32 outstanding PRs
- Various cleanups
- ARM SMMU Updates from Will Deacon:
- SMMUv3: Minor optimisation to avoid zeroing struct members on CMD submission
- SMMUv3: Increased use of batched commands to reduce submission latency
- SMMUv3: Refactoring in preparation for ECMDQ support
- SMMUv2: Fix races when probing devices with identical StreamIDs
- SMMUv2: Optimise walk cache flushing for Qualcomm implementations
- SMMUv2: Allow deep sleep states for some Qualcomm SoCs with shared clocks
- Various smaller optimizations, cleanups, and fixes
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEr9jSbILcajRFYWYyK/BELZcBGuMFAmEyKYAACgkQK/BELZcB
GuOzAxAAnJ02PG07BnFFFGN2/o3eVON4LQUXquMePjcZ8A8oQf073jO/ybWNnpJK
5V+DHRg2CAugFHks/EwIrxFXAWZuStrcnk81d8t6T6ROQl47Zv1qshksUTnsDQnz
V7mQ1P/pcsBwCUf73aD9ncLmLkiuTVfHKoKfe3gHeQI+H+2Lw4ijzB8kIwUqhkHI
heJZLDmO87S2Mr7zlCmMQH5R550fHrTKSbUCx9QqFu3GgWsjkU+3u1S17xR1bEoW
hmhJhyAw+MLrSgdeG4U9o+6AcQuRELEHfVSq7PtDxQ6hEVziGYGY4Nk+YiEcXFiv
mu9qfEkaP/2QOKszvks+nhHrwDnJ9WLnEEskiEFwjsaFauIKsRscfYVUBTWeYXJT
9t/PVngigWLDhGO0NEPthQvJExvJJs1MQQ72CcA6dd0XdGpN+aRglIUWUJP/nQHd
doAx4/1YWnHVkWWUef8NgmVvlHdoXjA7vy4QGL9FYCqV6ImfhAkJYKJ99X6Ovlmk
gje/Kx+5wUPT2nXNbTkjalIylyUNpugMY4xD7K06VXjvRMUf2SbYNDQxYJaDDld6
nDt0F0NvEyrj7HO8egwIZbX3MOikhMGHur48yEyCTbm+9oHQffkODq1o4OfuxJh2
nq0G5Plln9CEmhQVwzibcPSNlYPe8AZbbXqQ9DrJFusEpYj+01c=
=zVaQ
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- New DART IOMMU driver for Apple Silicon M1 chips
- Optimizations for iommu_[map/unmap] performance
- Selective TLB flush support for the AMD IOMMU driver to make it more
efficient on emulated IOMMUs
- Rework IOVA setup and default domain type setting to move more code
out of IOMMU drivers and to support runtime switching between certain
types of default domains
- VT-d Updates from Lu Baolu:
- Update the virtual command related registers
- Enable Intel IOMMU scalable mode by default
- Preset A/D bits for user space DMA usage
- Allow devices to have more than 32 outstanding PRs
- Various cleanups
- ARM SMMU Updates from Will Deacon:
SMMUv3:
- Minor optimisation to avoid zeroing struct members on CMD submission
- Increased use of batched commands to reduce submission latency
- Refactoring in preparation for ECMDQ support
SMMUv2:
- Fix races when probing devices with identical StreamIDs
- Optimise walk cache flushing for Qualcomm implementations
- Allow deep sleep states for some Qualcomm SoCs with shared clocks
- Various smaller optimizations, cleanups, and fixes
* tag 'iommu-updates-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (85 commits)
iommu/io-pgtable: Abstract iommu_iotlb_gather access
iommu/arm-smmu: Fix missing unlock on error in arm_smmu_device_group()
iommu/vt-d: Add present bit check in pasid entry setup helpers
iommu/vt-d: Use pasid_pte_is_present() helper function
iommu/vt-d: Drop the kernel doc annotation
iommu/vt-d: Allow devices to have more than 32 outstanding PRs
iommu/vt-d: Preset A/D bits for user space DMA usage
iommu/vt-d: Enable Intel IOMMU scalable mode by default
iommu/vt-d: Refactor Kconfig a bit
iommu/vt-d: Remove unnecessary oom message
iommu/vt-d: Update the virtual command related registers
iommu: Allow enabling non-strict mode dynamically
iommu: Merge strictness and domain type configs
iommu: Only log strictness for DMA domains
iommu: Expose DMA domain strictness via sysfs
iommu: Express DMA strictness via the domain type
iommu/vt-d: Prepare for multiple DMA domain types
iommu/arm-smmu: Prepare for multiple DMA domain types
iommu/amd: Prepare for multiple DMA domain types
iommu: Introduce explicit type for non-strict DMA domains
...
Pull swiotlb updates from Konrad Rzeszutek Wilk:
"A new feature called restricted DMA pools. It allows SWIOTLB to
utilize per-device (or per-platform) allocated memory pools instead of
using the global one.
The first big user of this is ARM Confidential Computing where the
memory for DMA operations can be set per platform"
* 'stable/for-linus-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb: (23 commits)
swiotlb: use depends on for DMA_RESTRICTED_POOL
of: restricted dma: Don't fail device probe on rmem init failure
of: Move of_dma_set_restricted_buffer() into device.c
powerpc/svm: Don't issue ultracalls if !mem_encrypt_active()
s390/pv: fix the forcing of the swiotlb
swiotlb: Free tbl memory in swiotlb_exit()
swiotlb: Emit diagnostic in swiotlb_exit()
swiotlb: Convert io_default_tlb_mem to static allocation
of: Return success from of_dma_set_restricted_buffer() when !OF_ADDRESS
swiotlb: add overflow checks to swiotlb_bounce
swiotlb: fix implicit debugfs declarations
of: Add plumbing for restricted DMA pool
dt-bindings: of: Add restricted DMA pool
swiotlb: Add restricted DMA pool initialization
swiotlb: Add restricted DMA alloc/free support
swiotlb: Refactor swiotlb_tbl_unmap_single
swiotlb: Move alloc_size to swiotlb_find_slots
swiotlb: Use is_swiotlb_force_bounce for swiotlb data bouncing
swiotlb: Update is_swiotlb_active to add a struct device argument
swiotlb: Update is_swiotlb_buffer to add a struct device argument
...
- fix debugfs initialization order (Anthony Iliopoulos)
- use memory_intersects() directly (Kefeng Wang)
- allow to return specific errors from ->map_sg
(Logan Gunthorpe, Martin Oliveira)
- turn the dma_map_sg return value into an unsigned int (me)
- provide a common global coherent pool іmplementation (me)
-----BEGIN PGP SIGNATURE-----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=spje
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.15' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- fix debugfs initialization order (Anthony Iliopoulos)
- use memory_intersects() directly (Kefeng Wang)
- allow to return specific errors from ->map_sg (Logan Gunthorpe,
Martin Oliveira)
- turn the dma_map_sg return value into an unsigned int (me)
- provide a common global coherent pool іmplementation (me)
* tag 'dma-mapping-5.15' of git://git.infradead.org/users/hch/dma-mapping: (31 commits)
hexagon: use the generic global coherent pool
dma-mapping: make the global coherent pool conditional
dma-mapping: add a dma_init_global_coherent helper
dma-mapping: simplify dma_init_coherent_memory
dma-mapping: allow using the global coherent pool for !ARM
ARM/nommu: use the generic dma-direct code for non-coherent devices
dma-direct: add support for dma_coherent_default_memory
dma-mapping: return an unsigned int from dma_map_sg{,_attrs}
dma-mapping: disallow .map_sg operations from returning zero on error
dma-mapping: return error code from dma_dummy_map_sg()
x86/amd_gart: don't set failed sg dma_address to DMA_MAPPING_ERROR
x86/amd_gart: return error code from gart_map_sg()
xen: swiotlb: return error code from xen_swiotlb_map_sg()
parisc: return error code from .map_sg() ops
sparc/iommu: don't set failed sg dma_address to DMA_MAPPING_ERROR
sparc/iommu: return error codes from .map_sg() ops
s390/pci: don't set failed sg dma_address to DMA_MAPPING_ERROR
s390/pci: return error code from s390_dma_map_sg()
powerpc/iommu: don't set failed sg dma_address to DMA_MAPPING_ERROR
powerpc/iommu: return error code from .map_sg() ops
...
Allocating and enabling a flush queue is in fact something we can
reasonably do while a DMA domain is active, without having to rebuild it
from scratch. Thus we can allow a strict -> non-strict transition from
sysfs without requiring to unbind the device's driver, which is of
particular interest to users who want to make selective relaxations to
critical devices like the one serving their root filesystem.
Disabling and draining a queue also seems technically possible to
achieve without rebuilding the whole domain, but would certainly be more
involved. Furthermore there's not such a clear use-case for tightening
up security *after* the device may already have done whatever it is that
you don't trust it not to do, so we only consider the relaxation case.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/d652966348c78457c38bf18daf369272a4ebc2c9.1628682049.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Eliminate the iommu_get_dma_strict() indirection and pipe the
information through the domain type from the beginning. Besides
the flow simplification this also has several nice side-effects:
- Automatically implies strict mode for untrusted devices by
virtue of their IOMMU_DOMAIN_DMA override.
- Ensures that we only end up using flush queues for drivers
which are aware of them and can actually benefit.
- Allows us to handle flush queue init failure by falling back
to strict mode instead of leaving it to possibly blow up later.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/47083d69155577f1367877b1594921948c366eb3.1628682049.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Promote the difference between strict and non-strict DMA domains from an
internal detail to a distinct domain feature and type, to pave the road
for exposing it through the sysfs default domain interface.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/08cd2afaf6b63c58ad49acec3517c9b32c2bb946.1628682049.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Since iommu_iotlb_gather exists to help drivers optimise flushing for a
given unmap request, it is also the logical place to indicate whether
the unmap is strict or not, and thus help them further optimise for
whether to expect a sync or a flush_all subsequently. As part of that,
it also seems fair to make the flush queue code take responsibility for
enforcing the really subtle ordering requirement it brings, so that we
don't need to worry about forgetting that if new drivers want to add
flush queue support, and can consolidate the existing versions.
While we're adding to the kerneldoc, also fill in some info for
@freelist which was overlooked previously.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/bf5f8e2ad84e48c712ccbf80fa8c610594c7595f.1628682049.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
iommu_dma_init_domain() is now only called from iommu_setup_dma_ops(),
which has already assumed dev to be non-NULL.
Reviewed-by: John Garry <john.garry@huawei.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/06024523c080364390016550065e3cfe8031367e.1628682049.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Return appropriate error codes EINVAL or ENOMEM from
iommup_dma_map_sg(). If lower level code returns ENOMEM, then we
return it, other errors are coalesced into EINVAL.
iommu_dma_map_sg_swiotlb() returns -EIO as its an unknown error
from a call that returns DMA_MAPPING_ERROR.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Currently, iommu_dma_alloc_noncontiguous() allocates a
struct dma_sgt_handle object to hold some state needed for
iommu_dma_free_noncontiguous().
However, the handle is neither freed nor returned explicitly by
the ->alloc_noncontiguous method, and therefore seems leaked.
This was found by code inspection, so please review carefully and test.
As a side note, it appears the struct dma_sgt_handle type is exposed
to users of the DMA-API by linux/dma-map-ops.h, but is has no users
or functions returning the type explicitly.
This may indicate it's a good idea to move the struct dma_sgt_handle type
to drivers/iommu/dma-iommu.c. The decision is left to maintainers :-)
Cc: stable@vger.kernel.org
Fixes: e817ee5f2f ("dma-iommu: implement ->alloc_noncontiguous")
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210723010552.50969-1-ezequiel@collabora.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Update is_swiotlb_buffer to add a struct device argument. This will be
useful later to allow for different pools.
Signed-off-by: Claire Chang <tientzu@chromium.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Stefano Stabellini <sstabellini@kernel.org>
Tested-by: Will Deacon <will@kernel.org>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
With the VIOT support in place, x86 platforms can now use the
virtio-iommu.
Because the other x86 IOMMU drivers aren't yet ready to use the
acpi_dma_setup() path, x86 doesn't implement arch_setup_dma_ops() at the
moment. Similarly to Vt-d and AMD IOMMU, clear the DMA ops and call
iommu_setup_dma_ops() from probe_finalize().
Acked-by: Joerg Roedel <jroedel@suse.de>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Link: https://lore.kernel.org/r/20210618152059.1194210-6-jean-philippe@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Passing a 64-bit address width to iommu_setup_dma_ops() is valid on
virtual platforms, but isn't currently possible. The overflow check in
iommu_dma_init_domain() prevents this even when @dma_base isn't 0. Pass
a limit address instead of a size, so callers don't have to fake a size
to work around the check.
The base and limit parameters are being phased out, because:
* they are redundant for x86 callers. dma-iommu already reserves the
first page, and the upper limit is already in domain->geometry.
* they can now be obtained from dev->dma_range_map on Arm.
But removing them on Arm isn't completely straightforward so is left for
future work. As an intermediate step, simplify the x86 callers by
passing dummy limits.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20210618152059.1194210-5-jean-philippe@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Compiling the recent dma-iommu changes under 32-bit x86 triggers this
compile warning:
drivers/iommu/dma-iommu.c:249:5: warning: format ‘%llx’ expects argument of type ‘long long unsigned int’, but argument 3 has type ‘phys_addr_t’ {aka ‘unsigned int’} [-Wformat=]
The reason is that %llx is used to print a variable of type
phys_addr_t. Fix it by using the correct %pa format specifier for
phys_addr_t.
Cc: Srinath Mannam <srinath.mannam@broadcom.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Oza Pawandeep <poza@codeaurora.org>
Fixes: 571f316074 ("iommu/dma: Fix IOVA reserve dma ranges")
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20210607124905.27525-1-joro@8bytes.org
Fix IOVA reserve failure in the case when address of first memory region
listed in dma-ranges is equal to 0x0.
Fixes: aadad097cd ("iommu/dma: Reserve IOVA for PCIe inaccessible DMA address")
Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Sven Peter <sven@svenpeter.dev>
Link: https://lore.kernel.org/r/20200914072319.6091-1-srinath.mannam@broadcom.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Pull swiotlb updates from Konrad Rzeszutek Wilk:
"Christoph Hellwig has taken a cleaver and trimmed off the not-needed
code and nicely folded duplicate code in the generic framework.
This lays the groundwork for more work to add extra DMA-backend-ish in
the future. Along with that some bug-fixes to make this a nice working
package"
* 'stable/for-linus-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb:
swiotlb: don't override user specified size in swiotlb_adjust_size
swiotlb: Fix the type of index
swiotlb: Make SWIOTLB_NO_FORCE perform no allocation
ARM: Qualify enabling of swiotlb_init()
swiotlb: remove swiotlb_nr_tbl
swiotlb: dynamically allocate io_tlb_default_mem
swiotlb: move global variables into a new io_tlb_mem structure
xen-swiotlb: remove the unused size argument from xen_swiotlb_fixup
xen-swiotlb: split xen_swiotlb_init
swiotlb: lift the double initialization protection from xen-swiotlb
xen-swiotlb: remove xen_io_tlb_start and xen_io_tlb_nslabs
xen-swiotlb: remove xen_set_nslabs
xen-swiotlb: use io_tlb_end in xen_swiotlb_dma_supported
xen-swiotlb: use is_swiotlb_buffer in is_xen_swiotlb_buffer
swiotlb: split swiotlb_tbl_sync_single
swiotlb: move orig addr and size validation into swiotlb_bounce
swiotlb: remove the alloc_size parameter to swiotlb_tbl_unmap_single
powerpc/svm: stop using io_tlb_start
- add a new dma_alloc_noncontiguous API (me, Ricardo Ribalda)
- fix a copyright noice (Hao Fang)
- add an unlikely annotation to dma_mapping_error (Heiner Kallweit)
- remove a pointless empty line (Wang Qing)
- add support for multi-pages map/unmap bencharking (Xiang Chen)
-----BEGIN PGP SIGNATURE-----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=DJoy
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.13' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- add a new dma_alloc_noncontiguous API (me, Ricardo Ribalda)
- fix a copyright notice (Hao Fang)
- add an unlikely annotation to dma_mapping_error (Heiner Kallweit)
- remove a pointless empty line (Wang Qing)
- add support for multi-pages map/unmap bencharking (Xiang Chen)
* tag 'dma-mapping-5.13' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: add unlikely hint to error path in dma_mapping_error
dma-mapping: benchmark: Add support for multi-pages map/unmap
dma-mapping: benchmark: use the correct HiSilicon copyright
dma-mapping: remove a pointless empty line in dma_alloc_coherent
media: uvcvideo: Use dma_alloc_noncontiguous API
dma-iommu: implement ->alloc_noncontiguous
dma-iommu: refactor iommu_dma_alloc_remap
dma-mapping: add a dma_alloc_noncontiguous API
dma-mapping: refactor dma_{alloc,free}_pages
dma-mapping: add a dma_mmap_pages helper
Instead make the global iommu_dma_strict paramete in iommu.c canonical by
exporting helpers to get and set it and use those directly in the drivers.
This make sure that the iommu.strict parameter also works for the AMD and
Intel IOMMU drivers on x86. As those default to lazy flushing a new
IOMMU_CMD_LINE_STRICT is used to turn the value into a tristate to
represent the default if not overriden by an explicit parameter.
[ported on top of the other iommu_attr changes and added a few small
missing bits]
Signed-off-by: Robin Murphy <robin.murphy@arm.com>.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210401155256.298656-19-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Function iommu_dma_free_cpu_cached_iovas() no longer has any caller, so
delete it.
With that, function free_cpu_cached_iovas() may be made static.
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/1616675401-151997-4-git-send-email-john.garry@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
In converting intel-iommu over to the common IOMMU DMA ops, it quietly
lost the functionality of its "forcedac" option. Since this is a handy
thing both for testing and for performance optimisation on certain
platforms, reimplement it under the common IOMMU parameter namespace.
For the sake of fixing the inadvertent breakage of the Intel-specific
parameter, remove the dmar_forcedac remnants and hook it up as an alias
while documenting the transition to the new common parameter.
Fixes: c588072bba ("iommu/vt-d: Convert intel iommu driver to the iommu ops")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/7eece8e0ea7bfbe2cd0e30789e0d46df573af9b0.1614961776.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Split swiotlb_tbl_sync_single into two separate funtions for the to device
and to cpu synchronization.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Now that swiotlb remembers the allocation size there is no need to pass
it back to swiotlb_tbl_unmap_single.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Implement support for allocating a non-contiguous DMA region.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Tested-by: Ricardo Ribalda <ribalda@chromium.org>
Split out a new helper that only allocates a sg_table worth of
memory without mapping it into contiguous kernel address space.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Tested-by: Ricardo Ribalda <ribalda@chromium.org>
Including:
- Fix for a sleeping-while-atomic issue in the AMD IOMMU code
- Disabling lazy IOTLB flush for untrusted devices in the Intel VT-d driver
- Fix status code definitions for Intel VT-d
- Fix IO Page Fault issue in Tegra IOMMU driver
-----BEGIN PGP SIGNATURE-----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=KsdV
-----END PGP SIGNATURE-----
Merge tag 'iommu-fixes-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
- Fix a sleeping-while-atomic issue in the AMD IOMMU code
- Disable lazy IOTLB flush for untrusted devices in the Intel VT-d
driver
- Fix status code definitions for Intel VT-d
- Fix IO Page Fault issue in Tegra IOMMU driver
* tag 'iommu-fixes-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/vt-d: Fix status code for Allocate/Free PASID command
iommu: Don't use lazy flush for untrusted device
iommu/tegra-smmu: Fix mc errors on tegra124-nyan
iommu/amd: Fix sleeping in atomic in increase_address_space()
The lazy IOTLB flushing setup leaves a time window, in which the device
can still access some system memory, which has already been unmapped by
the device driver. It's not suitable for untrusted devices. A malicious
device might use this to attack the system by obtaining data that it
shouldn't obtain.
Fixes: c588072bba ("iommu/vt-d: Convert intel iommu driver to the iommu ops")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210225061454.2864009-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
- add support to emulate processing delays in the DMA API benchmark
selftest (Barry Song)
- remove support for non-contiguous noncoherent allocations,
which aren't used and will be replaced by a different API
-----BEGIN PGP SIGNATURE-----
iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAmA2A7gLHGhjaEBsc3Qu
ZGUACgkQD55TZVIEUYMebw//bkSZ1v1FvGgMd+AQKKnNz+iNHH0MJAlEDhPCynFM
QCPg6OtU9IU/5nmyQlO3rgZ1IW+qABCF36TqjPZar6STuTv3dzfvv9xydyOqdPNA
ekFzc9FnjvWt4wzL+1pXiB/EfjKDudGAjlMyLhghl653HcLnLvE3LxgpfBMrUHbH
DfSBTXt4fTK4ck8ZO6FW2LXOtLgmJvk+qglO1vs9GQv/zcRHXYkIyvqMYTlHwBlh
Ltfl+kJzFHQ3taIo3utCeS5Qzctd6tbxy/Me4OHl2VydNAi8awQz4HX4yZyWYxl5
WpIGhHfD9ROKnGroaEhetUO4OczOXiqYdkt6tt5iAAUW2TFA+mgbvph3+Di/zxgl
4IxOQyhdWA38IA00YmNsoPafuuqC7WwASUfCufg+30MgHR3bpM7GyY5X84DIh3tm
wlPJBMl2RqWnfxmmvjPYxV2wtN3TkA8KJN/xVcUE8aWL2mV50l1/nDdlvCbmjg60
pQt1cGP8A2hODYwLHTzadm67xc0cLrkC8nQbrnDo/FAKGmDD3aHhS95TAIr+ZoeK
cgSFHNkJ1UcJ6nosCB3/MPlIJo1noAIeJnmuOIfhJn0uIof4CGQ5XQgWmJeHFLqO
GlwtJAN3F3db4dxMQNn5br049wob7fgFWqMPfTGy51bZ5BClUKWGSpEonavpUMd1
oKM=
=papz
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.12' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- add support to emulate processing delays in the DMA API benchmark
selftest (Barry Song)
- remove support for non-contiguous noncoherent allocations, which
aren't used and will be replaced by a different API
* tag 'dma-mapping-5.12' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: remove the {alloc,free}_noncoherent methods
dma-mapping: benchmark: pretend DMA is transmitting
It turns out allowing non-contigous allocations here was a rather bad
idea, as we'll now need to define ways to get the pages for mmaping
or dma_buf sharing. Revert this change and stick to the original
concept. A different API for the use case of non-contigous allocations
will be added back later.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Tested-by: Ricardo Ribalda <ribalda@chromium.org>:wq
Currently, because domain attach allows to be deferred from iommu
driver to device driver, and when iommu initializes, the devices
on the bus will be scanned and the default groups will be allocated.
Due to the above changes, some devices could be added to the same
group as below:
[ 3.859417] pci 0000:01:00.0: Adding to iommu group 16
[ 3.864572] pci 0000:01:00.1: Adding to iommu group 16
[ 3.869738] pci 0000:02:00.0: Adding to iommu group 17
[ 3.874892] pci 0000:02:00.1: Adding to iommu group 17
But when attaching these devices, it doesn't allow that a group has
more than one device, otherwise it will return an error. This conflicts
with the deferred attaching. Unfortunately, it has two devices in the
same group for my side, for example:
[ 9.627014] iommu_group_device_count(): device name[0]:0000:01:00.0
[ 9.633545] iommu_group_device_count(): device name[1]:0000:01:00.1
...
[ 10.255609] iommu_group_device_count(): device name[0]:0000:02:00.0
[ 10.262144] iommu_group_device_count(): device name[1]:0000:02:00.1
Finally, which caused the failure of tg3 driver when tg3 driver calls
the dma_alloc_coherent() to allocate coherent memory in the tg3_test_dma().
[ 9.660310] tg3 0000:01:00.0: DMA engine test failed, aborting
[ 9.754085] tg3: probe of 0000:01:00.0 failed with error -12
[ 9.997512] tg3 0000:01:00.1: DMA engine test failed, aborting
[ 10.043053] tg3: probe of 0000:01:00.1 failed with error -12
[ 10.288905] tg3 0000:02:00.0: DMA engine test failed, aborting
[ 10.334070] tg3: probe of 0000:02:00.0 failed with error -12
[ 10.578303] tg3 0000:02:00.1: DMA engine test failed, aborting
[ 10.622629] tg3: probe of 0000:02:00.1 failed with error -12
In addition, the similar situations also occur in other drivers such
as the bnxt_en driver. That can be reproduced easily in kdump kernel
when SME is active.
Let's move the handling currently in iommu_dma_deferred_attach() into
the iommu core code so that it can call the __iommu_attach_device()
directly instead of the iommu_attach_device(). The external interface
iommu_attach_device() is not suitable for handling this situation.
Signed-off-by: Lianbo Jiang <lijiang@redhat.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20210126115337.20068-3-lijiang@redhat.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Let's move out the is_kdump_kernel() check from iommu_dma_deferred_attach()
to iommu_dma_init(), and use the static-key in the fast-path to minimize
the impact in the normal case.
Co-developed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Lianbo Jiang <lijiang@redhat.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20210126115337.20068-2-lijiang@redhat.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The function has a single caller, so open code it there and take
advantage of the precalculated page count variable.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20201209112019.2625029-1-hch@lst.de
Signed-off-by: Will Deacon <will@kernel.org>
Combining the sg segments exposes a bug in the Intel i915 driver which
causes visual artifacts and the screen to freeze. This is most likely
because of how the i915 handles the returned list. It probably doesn't
respect the returned value specifying the number of elements in the list
and instead depends on the previous behaviour of the Intel iommu driver
which would return the same number of elements in the output list as in
the input list.
[ This has been fixed in the i915 tree, but we agreed to carry this fix
temporarily in the iommu tree and revert it before 5.11 is released:
https://lore.kernel.org/linux-iommu/20201103105442.GD22888@8bytes.org/
-- Will ]
Signed-off-by: Tom Murphy <murphyt7@tcd.ie>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Tested-by: Logan Gunthorpe <logang@deltatee.com>
Link: https://lore.kernel.org/r/20201124082057.2614359-5-baolu.lu@linux.intel.com
Signed-off-by: Will Deacon <will@kernel.org>
Allow the dma-iommu api to use bounce buffers for untrusted devices.
This is a copy of the intel bounce buffer code.
Co-developed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Tom Murphy <murphyt7@tcd.ie>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Tested-by: Logan Gunthorpe <logang@deltatee.com>
Link: https://lore.kernel.org/r/20201124082057.2614359-4-baolu.lu@linux.intel.com
Signed-off-by: Will Deacon <will@kernel.org>
Add a iommu_dma_free_cpu_cached_iovas function to allow drivers which
use the dma-iommu ops to free cached cpu iovas.
Signed-off-by: Tom Murphy <murphyt7@tcd.ie>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Tested-by: Logan Gunthorpe <logang@deltatee.com>
Link: https://lore.kernel.org/r/20201124082057.2614359-3-baolu.lu@linux.intel.com
Signed-off-by: Will Deacon <will@kernel.org>
Allow the iommu_unmap_fast to return newly freed page table pages and
pass the freelist to queue_iova in the dma-iommu ops path.
This is useful for iommu drivers (in this case the intel iommu driver)
which need to wait for the ioTLB to be flushed before newly
free/unmapped page table pages can be freed. This way we can still batch
ioTLB free operations and handle the freelists.
Signed-off-by: Tom Murphy <murphyt7@tcd.ie>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Tested-by: Logan Gunthorpe <logang@deltatee.com>
Link: https://lore.kernel.org/r/20201124082057.2614359-2-baolu.lu@linux.intel.com
Signed-off-by: Will Deacon <will@kernel.org>
- rework the non-coherent DMA allocator
- move private definitions out of <linux/dma-mapping.h>
- lower CMA_ALIGNMENT (Paul Cercueil)
- remove the omap1 dma address translation in favor of the common
code
- make dma-direct aware of multiple dma offset ranges (Jim Quinlan)
- support per-node DMA CMA areas (Barry Song)
- increase the default seg boundary limit (Nicolin Chen)
- misc fixes (Robin Murphy, Thomas Tai, Xu Wang)
- various cleanups
-----BEGIN PGP SIGNATURE-----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=Bkf/
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- rework the non-coherent DMA allocator
- move private definitions out of <linux/dma-mapping.h>
- lower CMA_ALIGNMENT (Paul Cercueil)
- remove the omap1 dma address translation in favor of the common code
- make dma-direct aware of multiple dma offset ranges (Jim Quinlan)
- support per-node DMA CMA areas (Barry Song)
- increase the default seg boundary limit (Nicolin Chen)
- misc fixes (Robin Murphy, Thomas Tai, Xu Wang)
- various cleanups
* tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mapping: (63 commits)
ARM/ixp4xx: add a missing include of dma-map-ops.h
dma-direct: simplify the DMA_ATTR_NO_KERNEL_MAPPING handling
dma-direct: factor out a dma_direct_alloc_from_pool helper
dma-direct check for highmem pages in dma_direct_alloc_pages
dma-mapping: merge <linux/dma-noncoherent.h> into <linux/dma-map-ops.h>
dma-mapping: move large parts of <linux/dma-direct.h> to kernel/dma
dma-mapping: move dma-debug.h to kernel/dma/
dma-mapping: remove <asm/dma-contiguous.h>
dma-mapping: merge <linux/dma-contiguous.h> into <linux/dma-map-ops.h>
dma-contiguous: remove dma_contiguous_set_default
dma-contiguous: remove dev_set_cma_area
dma-contiguous: remove dma_declare_contiguous
dma-mapping: split <linux/dma-mapping.h>
cma: decrease CMA_ALIGNMENT lower limit to 2
firewire-ohci: use dma_alloc_pages
dma-iommu: implement ->alloc_noncoherent
dma-mapping: add new {alloc,free}_noncoherent dma_map_ops methods
dma-mapping: add a new dma_alloc_pages API
dma-mapping: remove dma_cache_sync
53c700: convert to dma_alloc_noncoherent
...
