Add the "cpudump" command to have the current CPU ftrace buffer dumped
to console if a function is hit. This is useful when debugging a
tripple fault, where you have an idea of a function that is called
just before the tripple fault occurs, and can tell ftrace to dump its
content out to the console before it continues.
This differs from the "dump" command as it only dumps the content of
the ring buffer for the currently executing CPU, and does not show
the contents of the other CPUs.
Format is:
<function>:cpudump
echo 'bad_address:cpudump' > /debug/tracing/set_ftrace_filter
To remove this:
echo '!bad_address:cpudump' > /debug/tracing/set_ftrace_filter
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add the "dump" command to have the ftrace buffer dumped to console if
a function is hit. This is useful when debugging a tripple fault,
where you have an idea of a function that is called just before the
tripple fault occurs, and can tell ftrace to dump its content out
to the console before it continues.
Format is:
<function>:dump
echo 'bad_address:dump' > /debug/tracing/set_ftrace_filter
To remove this:
echo '!bad_address:dump' > /debug/tracing/set_ftrace_filter
Requested-by: Luis Claudio R. Goncalves <lclaudio@uudg.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The irqsoff tracer records the max time that interrupts are disabled.
There are hooks in the assembly code that calls back into the tracer when
interrupts are disabled or enabled.
When they are enabled, the tracer checks if the amount of time they
were disabled is larger than the previous recorded max interrupts off
time. If it is, it creates a snapshot of the currently running trace
to store where the last largest interrupts off time was held and how
it happened.
During testing, this RCU lockdep dump appeared:
[ 1257.829021] ===============================
[ 1257.829021] [ INFO: suspicious RCU usage. ]
[ 1257.829021] 3.10.0-rc1-test+ #171 Tainted: G W
[ 1257.829021] -------------------------------
[ 1257.829021] /home/rostedt/work/git/linux-trace.git/include/linux/rcupdate.h:780 rcu_read_lock() used illegally while idle!
[ 1257.829021]
[ 1257.829021] other info that might help us debug this:
[ 1257.829021]
[ 1257.829021]
[ 1257.829021] RCU used illegally from idle CPU!
[ 1257.829021] rcu_scheduler_active = 1, debug_locks = 0
[ 1257.829021] RCU used illegally from extended quiescent state!
[ 1257.829021] 2 locks held by trace-cmd/4831:
[ 1257.829021] #0: (max_trace_lock){......}, at: [<ffffffff810e2b77>] stop_critical_timing+0x1a3/0x209
[ 1257.829021] #1: (rcu_read_lock){.+.+..}, at: [<ffffffff810dae5a>] __update_max_tr+0x88/0x1ee
[ 1257.829021]
[ 1257.829021] stack backtrace:
[ 1257.829021] CPU: 3 PID: 4831 Comm: trace-cmd Tainted: G W 3.10.0-rc1-test+ #171
[ 1257.829021] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS SDBLI944.86P 05/08/2007
[ 1257.829021] 0000000000000001 ffff880065f49da8 ffffffff8153dd2b ffff880065f49dd8
[ 1257.829021] ffffffff81092a00 ffff88006bd78680 ffff88007add7500 0000000000000003
[ 1257.829021] ffff88006bd78680 ffff880065f49e18 ffffffff810daebf ffffffff810dae5a
[ 1257.829021] Call Trace:
[ 1257.829021] [<ffffffff8153dd2b>] dump_stack+0x19/0x1b
[ 1257.829021] [<ffffffff81092a00>] lockdep_rcu_suspicious+0x109/0x112
[ 1257.829021] [<ffffffff810daebf>] __update_max_tr+0xed/0x1ee
[ 1257.829021] [<ffffffff810dae5a>] ? __update_max_tr+0x88/0x1ee
[ 1257.829021] [<ffffffff811002b9>] ? user_enter+0xfd/0x107
[ 1257.829021] [<ffffffff810dbf85>] update_max_tr_single+0x11d/0x12d
[ 1257.829021] [<ffffffff811002b9>] ? user_enter+0xfd/0x107
[ 1257.829021] [<ffffffff810e2b15>] stop_critical_timing+0x141/0x209
[ 1257.829021] [<ffffffff8109569a>] ? trace_hardirqs_on+0xd/0xf
[ 1257.829021] [<ffffffff811002b9>] ? user_enter+0xfd/0x107
[ 1257.829021] [<ffffffff810e3057>] time_hardirqs_on+0x2a/0x2f
[ 1257.829021] [<ffffffff811002b9>] ? user_enter+0xfd/0x107
[ 1257.829021] [<ffffffff8109550c>] trace_hardirqs_on_caller+0x16/0x197
[ 1257.829021] [<ffffffff8109569a>] trace_hardirqs_on+0xd/0xf
[ 1257.829021] [<ffffffff811002b9>] user_enter+0xfd/0x107
[ 1257.829021] [<ffffffff810029b4>] do_notify_resume+0x92/0x97
[ 1257.829021] [<ffffffff8154bdca>] int_signal+0x12/0x17
What happened was entering into the user code, the interrupts were enabled
and a max interrupts off was recorded. The trace buffer was saved along with
various information about the task: comm, pid, uid, priority, etc.
The uid is recorded with task_uid(tsk). But this is a macro that uses rcu_read_lock()
to retrieve the data, and this happened to happen where RCU is blind (user_enter).
As only the preempt and irqs off tracers can have this happen, and they both
only have the tsk == current, if tsk == current, use current_uid() instead of
task_uid(), as current_uid() does not use RCU as only current can change its uid.
This fixes the RCU suspicious splat.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The branch selftest calls trace_test_buffer(), but with the new code
it expects the first parameter to be a pointer to a struct trace_buffer.
All self tests were changed but the branch selftest was missed.
This caused either a crash or failed test when the branch selftest was
enabled.
Link: http://lkml.kernel.org/r/20130529141333.GA24064@localhost
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
As rcu_dereference_raw() under RCU debug config options can add quite a
bit of checks, and that tracing uses rcu_dereference_raw(), these checks
happen with the function tracer. The function tracer also happens to trace
these debug checks too. This added overhead can livelock the system.
Have the function tracer use the new RCU _notrace equivalents that do
not do the debug checks for RCU.
Link: http://lkml.kernel.org/r/20130528184209.467603904@goodmis.org
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The tracing infrastructure sets up for possible CPUs, but it uses
the ring buffer polling, it is possible to call the ring buffer
polling code with a CPU that hasn't been allocated. This will cause
a kernel oops when it access a ring buffer cpu buffer that is part
of the possible cpus but hasn't been allocated yet as the CPU has never
been online.
Reported-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Tested-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If ftrace=<tracer> is on the kernel command line, when that tracer is
registered, it will be initiated by tracing_set_tracer() to execute that
tracer.
The nop tracer is just a stub tracer that is used to have no tracer
enabled. It is assigned at early bootup as it is the default tracer.
But if ftrace=nop is on the kernel command line, the registering of the
nop tracer will call tracing_set_tracer() which will try to execute
the nop tracer. But it expects tr->current_trace to be assigned something
as it usually is assigned to the nop tracer. As it hasn't been assigned
to anything yet, it causes the system to crash.
The simple fix is to move the tr->current_trace = nop before registering
the nop tracer. The functionality is still the same as the nop tracer
doesn't do anything anyway.
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Since try_module_get() returns false( = 0) when it fails to
pindown a module, event_enable_func() returns 0 which means
"succeed". This can cause a kernel panic when the entry
is removed, because the event is already released.
This fixes the bug by returning -EBUSY, because the reason
why it fails is that the module is being removed at that time.
Link: http://lkml.kernel.org/r/20130516114848.13508.97899.stgit@mhiramat-M0-7522
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Tom Zanussi <tom.zanussi@intel.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
According to sparse warning, print_*probe_event static because
those functions are not directly called from outside.
Link: http://lkml.kernel.org/r/20130513115839.6545.83067.stgit@mhiramat-M0-7522
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Tom Zanussi <tom.zanussi@intel.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Use rcu_dereference_raw() for accessing tp->files. Because the
write-side uses rcu_assign_pointer() for memory barrier,
the read-side also has to use rcu_dereference_raw() with
read memory barrier.
Link: http://lkml.kernel.org/r/20130513115834.6545.17022.stgit@mhiramat-M0-7522
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Tom Zanussi <tom.zanussi@intel.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Special preds are created when folding a series of preds that
can be done in serial. These are allocated in an ops field of
the pred structure. But they were never freed, causing memory
leaks.
This was discovered using the kmemleak checker:
unreferenced object 0xffff8800797fd5e0 (size 32):
comm "swapper/0", pid 1, jiffies 4294690605 (age 104.608s)
hex dump (first 32 bytes):
00 00 01 00 03 00 05 00 07 00 09 00 0b 00 0d 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff814b52af>] kmemleak_alloc+0x73/0x98
[<ffffffff8111ff84>] kmemleak_alloc_recursive.constprop.42+0x16/0x18
[<ffffffff81120e68>] __kmalloc+0xd7/0x125
[<ffffffff810d47eb>] kcalloc.constprop.24+0x2d/0x2f
[<ffffffff810d4896>] fold_pred_tree_cb+0xa9/0xf4
[<ffffffff810d3781>] walk_pred_tree+0x47/0xcc
[<ffffffff810d5030>] replace_preds.isra.20+0x6f8/0x72f
[<ffffffff810d50b5>] create_filter+0x4e/0x8b
[<ffffffff81b1c30d>] ftrace_test_event_filter+0x5a/0x155
[<ffffffff8100028d>] do_one_initcall+0xa0/0x137
[<ffffffff81afbedf>] kernel_init_freeable+0x14d/0x1dc
[<ffffffff814b24b7>] kernel_init+0xe/0xdb
[<ffffffff814d539c>] ret_from_fork+0x7c/0xb0
[<ffffffffffffffff>] 0xffffffffffffffff
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: stable@vger.kernel.org # 2.6.39+
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
kprobes up to par with the latest changes to ftrace (multi buffering
and the new function probes).
He also discovered and fixed some bugs in doing so. When pulling in his
patches, I also found a few minor bugs as well and fixed them.
This also includes a compile fix for some archs that select the ring buffer
but not tracing.
I based this off of the last patch you took from me that fixed the merge
conflict error, as that was the commit that had all the changes I needed
for this set of changes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQEcBAABAgAGBQJRjYnJAAoJEOdOSU1xswtMg9EH/iFs438FgrNMk2ZdQftmqcqA
cqcactHo1mmoHjAoLZT/oDBjEThhVUuqzMXrFRutSYcTh4PsQEC3arX0mpsC+T12
UEEV/tZS3TXH+GXEyrOit/O3kzntQcDHwJDV4+0n80IrJmw4IDZbnV3R8DWjS6wp
so+dq0A1pwehcG/upgpw1oTKsGv1G/p6vyf968B6W44icHEClLiph4JE2kzE6D3r
fzSpOLaQoBEvwIRf6xRKxi240VqIItXwfG7pwNpPpSC37gRLzm74zGr+Sj93/k1y
pARbZ/5XO7/pcVYQYupErRAoV5in+QMZ67k5G1vQIvyOS9r039catbQf/7PkzcI=
=EZCE
-----END PGP SIGNATURE-----
Merge tag 'trace-fixes-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing/kprobes update from Steven Rostedt:
"The majority of these changes are from Masami Hiramatsu bringing
kprobes up to par with the latest changes to ftrace (multi buffering
and the new function probes).
He also discovered and fixed some bugs in doing so. When pulling in
his patches, I also found a few minor bugs as well and fixed them.
This also includes a compile fix for some archs that select the ring
buffer but not tracing.
I based this off of the last patch you took from me that fixed the
merge conflict error, as that was the commit that had all the changes
I needed for this set of changes."
* tag 'trace-fixes-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing/kprobes: Support soft-mode disabling
tracing/kprobes: Support ftrace_event_file base multibuffer
tracing/kprobes: Pass trace_probe directly from dispatcher
tracing/kprobes: Increment probe hit-count even if it is used by perf
tracing/kprobes: Use bool for retprobe checker
ftrace: Fix function probe when more than one probe is added
ftrace: Fix the output of enabled_functions debug file
ftrace: Fix locking in register_ftrace_function_probe()
tracing: Add helper function trace_create_new_event() to remove duplicate code
tracing: Modify soft-mode only if there's no other referrer
tracing: Indicate enabled soft-mode in enable file
tracing/kprobes: Fix to increment return event probe hit-count
ftrace: Cleanup regex_lock and ftrace_lock around hash updating
ftrace, kprobes: Fix a deadlock on ftrace_regex_lock
ftrace: Have ftrace_regex_write() return either read or error
tracing: Return error if register_ftrace_function_probe() fails for event_enable_func()
tracing: Don't succeed if event_enable_func did not register anything
ring-buffer: Select IRQ_WORK
Support soft-mode disabling on kprobe-based dynamic events.
Soft-disabling is just ignoring recording if the soft disabled
flag is set.
Link: http://lkml.kernel.org/r/20130509054454.30398.7237.stgit@mhiramat-M0-7522
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Tom Zanussi <tom.zanussi@intel.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Increment probe hit-count for profiling even if it is used
by perf tool. Same thing has already done in trace_uprobe.
Link: http://lkml.kernel.org/r/20130509054436.30398.21133.stgit@mhiramat-M0-7522
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Tom Zanussi <tom.zanussi@intel.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The enabled_functions debugfs file was created to be able to see
what functions have been modified from nops to calling a tracer.
The current method uses the counter in the function record.
As when a ftrace_ops is registered to a function, its count
increases. But that doesn't mean that the function is actively
being traced. /proc/sys/kernel/ftrace_enabled can be set to zero
which would disable it, as well as something can go wrong and
we can think its enabled when only the counter is set.
The record's FTRACE_FL_ENABLED flag is set or cleared when its
function is modified. That is a much more accurate way of knowing
what function is enabled or not.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The iteration of the ftrace function list and the call to
ftrace_match_record() need to be protected by the ftrace_lock.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Both __trace_add_new_event() and __trace_early_add_new_event() do
basically the same thing, except that __trace_add_new_event() does
a little more.
Instead of having duplicate code between the two functions, add
a helper function trace_create_new_event() that both can use.
This will help against having bugs fixed in one function but not
the other.
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Modify soft-mode flag only if no other soft-mode referrer
(currently only the ftrace triggers) by using a reference
counter in each ftrace_event_file.
Without this fix, adding and removing several different
enable/disable_event triggers on the same event clear
soft-mode bit from the ftrace_event_file. This also
happens with a typo of glob on setting triggers.
e.g.
# echo vfs_symlink:enable_event:net:netif_rx > set_ftrace_filter
# cat events/net/netif_rx/enable
0*
# echo typo_func:enable_event:net:netif_rx > set_ftrace_filter
# cat events/net/netif_rx/enable
0
# cat set_ftrace_filter
#### all functions enabled ####
vfs_symlink:enable_event:net:netif_rx:unlimited
As above, we still have a trigger, but soft-mode is gone.
Link: http://lkml.kernel.org/r/20130509054429.30398.7464.stgit@mhiramat-M0-7522
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: David Sharp <dhsharp@google.com>
Cc: Hiraku Toyooka <hiraku.toyooka.gu@hitachi.com>
Cc: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Indicate enabled soft-mode event as "1*" in "enable" file
for each event, because it can be soft-disabled when disable_event
trigger is hit.
Link: http://lkml.kernel.org/r/20130509054426.30398.28202.stgit@mhiramat-M0-7522
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cleanup regex_lock and ftrace_lock locking points around
ftrace_ops hash update code.
The new rule is that regex_lock protects ops->*_hash
read-update-write code for each ftrace_ops. Usually,
hash update is done by following sequence.
1. allocate a new local hash and copy the original hash.
2. update the local hash.
3. move(actually, copy) back the local hash to ftrace_ops.
4. update ftrace entries if needed.
5. release the local hash.
This makes regex_lock protect #1-#4, and ftrace_lock
to protect #3, #4 and adding and removing ftrace_ops from the
ftrace_ops_list. The ftrace_lock protects #3 as well because
the move functions update the entries too.
Link: http://lkml.kernel.org/r/20130509054421.30398.83411.stgit@mhiramat-M0-7522
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Fix a deadlock on ftrace_regex_lock which happens when setting
an enable_event trigger on dynamic kprobe event as below.
----
sh-2.05b# echo p vfs_symlink > kprobe_events
sh-2.05b# echo vfs_symlink:enable_event:kprobes:p_vfs_symlink_0 > set_ftrace_filter
=============================================
[ INFO: possible recursive locking detected ]
3.9.0+ #35 Not tainted
---------------------------------------------
sh/72 is trying to acquire lock:
(ftrace_regex_lock){+.+.+.}, at: [<ffffffff810ba6c1>] ftrace_set_hash+0x81/0x1f0
but task is already holding lock:
(ftrace_regex_lock){+.+.+.}, at: [<ffffffff810b7cbd>] ftrace_regex_write.isra.29.part.30+0x3d/0x220
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(ftrace_regex_lock);
lock(ftrace_regex_lock);
*** DEADLOCK ***
----
To fix that, this introduces a finer regex_lock for each ftrace_ops.
ftrace_regex_lock is too big of a lock which protects all
filter/notrace_hash operations, but it doesn't need to be a global
lock after supporting multiple ftrace_ops because each ftrace_ops
has its own filter/notrace_hash.
Link: http://lkml.kernel.org/r/20130509054417.30398.84254.stgit@mhiramat-M0-7522
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
[ Added initialization flag and automate mutex initialization for
non ftrace.c ftrace_probes. ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
As ftrace_regex_write() reads the result of ftrace_process_regex()
which can sometimes return a positive number, only consider a
failure if the return is negative. Otherwise, it will skip possible
other registered probes and by returning a positive number that
wasn't read, it will confuse the user processes doing the writing.
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
register_ftrace_function_probe() returns the number of functions
it registered, which can be zero, it can also return a negative number
if something went wrong. But event_enable_func() only checks for
the case that it didn't register anything, it needs to also check
for the case that something went wrong and return that error code
as well.
Added some comments about the code as well, to make it more
understandable.
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Return 0 instead of the number of activated ftrace function probes if
event_enable_func succeeded and return an error code if it failed or
did not register any functions. But it currently returns the number
of registered functions and if it didn't register anything, it returns 0,
but that is considered success.
This also fixes the return value. As if it succeeds, it returns the
number of functions that were enabled, which is returned back to
the user in ftrace_regex_write (the write() return code). If only
one function is enabled, then the return code of the write is one,
and this can confuse the user program in thinking it only wrote 1
byte.
Link: http://lkml.kernel.org/r/20130509054413.30398.55650.stgit@mhiramat-M0-7522
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
[ Rewrote change log to reflect that this fixes two bugs - SR ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Pull block driver updates from Jens Axboe:
"It might look big in volume, but when categorized, not a lot of
drivers are touched. The pull request contains:
- mtip32xx fixes from Micron.
- A slew of drbd updates, this time in a nicer series.
- bcache, a flash/ssd caching framework from Kent.
- Fixes for cciss"
* 'for-3.10/drivers' of git://git.kernel.dk/linux-block: (66 commits)
bcache: Use bd_link_disk_holder()
bcache: Allocator cleanup/fixes
cciss: bug fix to prevent cciss from loading in kdump crash kernel
cciss: add cciss_allow_hpsa module parameter
drivers/block/mg_disk.c: add CONFIG_PM_SLEEP to suspend/resume functions
mtip32xx: Workaround for unaligned writes
bcache: Make sure blocksize isn't smaller than device blocksize
bcache: Fix merge_bvec_fn usage for when it modifies the bvm
bcache: Correctly check against BIO_MAX_PAGES
bcache: Hack around stuff that clones up to bi_max_vecs
bcache: Set ra_pages based on backing device's ra_pages
bcache: Take data offset from the bdev superblock.
mtip32xx: mtip32xx: Disable TRIM support
mtip32xx: fix a smatch warning
bcache: Disable broken btree fuzz tester
bcache: Fix a format string overflow
bcache: Fix a minor memory leak on device teardown
bcache: Documentation updates
bcache: Use WARN_ONCE() instead of __WARN()
bcache: Add missing #include <linux/prefetch.h>
...
As the wake up logic for waiters on the buffer has been moved
from the tracing code to the ring buffer, it requires also adding
IRQ_WORK as the wake up code is performed via irq_work.
This fixes compile breakage when a user of the ring buffer is selected
but tracing and irq_work are not.
Link http://lkml.kernel.org/r/20130503115332.GT8356@rric.localhost
Cc: Arnd Bergmann <arnd@arndb.de>
Reported-by: Robert Richter <rric@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Pull perf updates from Ingo Molnar:
"Features:
- Add "uretprobes" - an optimization to uprobes, like kretprobes are
an optimization to kprobes. "perf probe -x file sym%return" now
works like kretprobes. By Oleg Nesterov.
- Introduce per core aggregation in 'perf stat', from Stephane
Eranian.
- Add memory profiling via PEBS, from Stephane Eranian.
- Event group view for 'annotate' in --stdio, --tui and --gtk, from
Namhyung Kim.
- Add support for AMD NB and L2I "uncore" counters, by Jacob Shin.
- Add Ivy Bridge-EP uncore support, by Zheng Yan
- IBM zEnterprise EC12 oprofile support patchlet from Robert Richter.
- Add perf test entries for checking breakpoint overflow signal
handler issues, from Jiri Olsa.
- Add perf test entry for for checking number of EXIT events, from
Namhyung Kim.
- Add perf test entries for checking --cpu in record and stat, from
Jiri Olsa.
- Introduce perf stat --repeat forever, from Frederik Deweerdt.
- Add --no-demangle to report/top, from Namhyung Kim.
- PowerPC fixes plus a couple of cleanups/optimizations in uprobes
and trace_uprobes, by Oleg Nesterov.
Various fixes and refactorings:
- Fix dependency of the python binding wrt libtraceevent, from
Naohiro Aota.
- Simplify some perf_evlist methods and to allow 'stat' to share code
with 'record' and 'trace', by Arnaldo Carvalho de Melo.
- Remove dead code in related to libtraceevent integration, from
Namhyung Kim.
- Revert "perf sched: Handle PERF_RECORD_EXIT events" to get 'perf
sched lat' back working, by Arnaldo Carvalho de Melo
- We don't use Newt anymore, just plain libslang, by Arnaldo Carvalho
de Melo.
- Kill a bunch of die() calls, from Namhyung Kim.
- Fix build on non-glibc systems due to libio.h absence, from Cody P
Schafer.
- Remove some perf_session and tracing dead code, from David Ahern.
- Honor parallel jobs, fix from Borislav Petkov
- Introduce tools/lib/lk library, initially just removing duplication
among tools/perf and tools/vm. from Borislav Petkov
... and many more I missed to list, see the shortlog and git log for
more details."
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (136 commits)
perf/x86/intel/P4: Robistify P4 PMU types
perf/x86/amd: Fix AMD NB and L2I "uncore" support
perf/x86/amd: Remove old-style NB counter support from perf_event_amd.c
perf/x86: Check all MSRs before passing hw check
perf/x86/amd: Add support for AMD NB and L2I "uncore" counters
perf/x86/intel: Add Ivy Bridge-EP uncore support
perf/x86/intel: Fix SNB-EP CBO and PCU uncore PMU filter management
perf/x86: Avoid kfree() in CPU_{STARTING,DYING}
uprobes/perf: Avoid perf_trace_buf_prepare/submit if ->perf_events is empty
uprobes/tracing: Don't pass addr=ip to perf_trace_buf_submit()
uprobes/tracing: Change create_trace_uprobe() to support uretprobes
uprobes/tracing: Make seq_printf() code uretprobe-friendly
uprobes/tracing: Make register_uprobe_event() paths uretprobe-friendly
uprobes/tracing: Make uprobe_{trace,perf}_print() uretprobe-friendly
uprobes/tracing: Introduce is_ret_probe() and uretprobe_dispatcher()
uprobes/tracing: Introduce uprobe_{trace,perf}_print() helpers
uprobes/tracing: Generalize struct uprobe_trace_entry_head
uprobes/tracing: Kill the pointless local_save_flags/preempt_count calls
uprobes/tracing: Kill the pointless seq_print_ip_sym() call
uprobes/tracing: Kill the pointless task_pt_regs() calls
...
During the 3.10 merge, a conflict happened and the resolution was
almost, but not quite, correct. An if statement was reversed.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
[ Duh. That was just silly of me - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Along with the usual minor fixes and clean ups there are a few major
changes with this pull request.
1) Multiple buffers for the ftrace facility
This feature has been requested by many people over the last few years.
I even heard that Google was about to implement it themselves. I finally
had time and cleaned up the code such that you can now create multiple
instances of the ftrace buffer and have different events go to different
buffers. This way, a low frequency event will not be lost in the noise
of a high frequency event.
Note, currently only events can go to different buffers, the tracers
(ie. function, function_graph and the latency tracers) still can only
be written to the main buffer.
2) The function tracer triggers have now been extended.
The function tracer had two triggers. One to enable tracing when a
function is hit, and one to disable tracing. Now you can record a
stack trace on a single (or many) function(s), take a snapshot of the
buffer (copy it to the snapshot buffer), and you can enable or disable
an event to be traced when a function is hit.
3) A perf clock has been added.
A "perf" clock can be chosen to be used when tracing. This will cause
ftrace to use the same clock as perf uses, and hopefully this will make
it easier to interleave the perf and ftrace data for analysis.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQEcBAABAgAGBQJRfnTPAAoJEOdOSU1xswtMqYYH/1WIdrwXmxHflErnYkCIr3sU
QtYae2K5A1HcgiqOvRJrdWMOt016iMx5CaQQyBFM1vvMiPY0sTWRmwNxDfZzz9LN
10jRvWEzZSLtzl+a9mkFWLEpr5nR/QODOxkWFCnRWscp46sp04LSTxGDYsOnPQZB
sam/AQ1h4xA+DqDBChm9BDEUEPorGleTlN54LBaCGgSFGvrbF+eAg2s4vHNAQAvQ
8d5xjSE9zC7J+FqbVxvJTbKI3+EqKL6hMsJKsKfi0SI+FuxBaFMSltXck5zKyTI4
HpNJzXCmw+v90Tju7oMkPHh6RTbESPCHoGU+wqE52fM6m7oScVeuI/kfc6USwU4=
=W1n+
-----END PGP SIGNATURE-----
Merge tag 'trace-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"Along with the usual minor fixes and clean ups there are a few major
changes with this pull request.
1) Multiple buffers for the ftrace facility
This feature has been requested by many people over the last few
years. I even heard that Google was about to implement it themselves.
I finally had time and cleaned up the code such that you can now
create multiple instances of the ftrace buffer and have different
events go to different buffers. This way, a low frequency event will
not be lost in the noise of a high frequency event.
Note, currently only events can go to different buffers, the tracers
(ie function, function_graph and the latency tracers) still can only
be written to the main buffer.
2) The function tracer triggers have now been extended.
The function tracer had two triggers. One to enable tracing when a
function is hit, and one to disable tracing. Now you can record a
stack trace on a single (or many) function(s), take a snapshot of the
buffer (copy it to the snapshot buffer), and you can enable or disable
an event to be traced when a function is hit.
3) A perf clock has been added.
A "perf" clock can be chosen to be used when tracing. This will cause
ftrace to use the same clock as perf uses, and hopefully this will
make it easier to interleave the perf and ftrace data for analysis."
* tag 'trace-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (82 commits)
tracepoints: Prevent null probe from being added
tracing: Compare to 1 instead of zero for is_signed_type()
tracing: Remove obsolete macro guard _TRACE_PROFILE_INIT
ftrace: Get rid of ftrace_profile_bits
tracing: Check return value of tracing_init_dentry()
tracing: Get rid of unneeded key calculation in ftrace_hash_move()
tracing: Reset ftrace_graph_filter_enabled if count is zero
tracing: Fix off-by-one on allocating stat->pages
kernel: tracing: Use strlcpy instead of strncpy
tracing: Update debugfs README file
tracing: Fix ftrace_dump()
tracing: Rename trace_event_mutex to trace_event_sem
tracing: Fix comment about prefix in arch_syscall_match_sym_name()
tracing: Convert trace_destroy_fields() to static
tracing: Move find_event_field() into trace_events.c
tracing: Use TRACE_MAX_PRINT instead of constant
tracing: Use pr_warn_once instead of open coded implementation
ring-buffer: Add ring buffer startup selftest
tracing: Bring Documentation/trace/ftrace.txt up to date
tracing: Add "perf" trace_clock
...
Conflicts:
kernel/trace/ftrace.c
kernel/trace/trace.c
Conflicts:
arch/x86/kernel/cpu/perf_event_intel.c
Merge in the latest fixes before applying new patches, resolve the conflict.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This reverts commit 3a366e614d.
Wanlong Gao reports that it causes a kernel panic on his machine several
minutes after boot. Reverting it removes the panic.
Jens says:
"It's not quite clear why that is yet, so I think we should just revert
the commit for 3.9 final (which I'm assuming is pretty close).
The wifi is crap at the LSF hotel, so sending this email instead of
queueing up a revert and pull request."
Reported-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Requested-by: Jens Axboe <axboe@kernel.dk>
Cc: Tejun Heo <tj@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
perf_trace_buf_prepare() + perf_trace_buf_submit() make no sense
if this task/CPU has no active counters. Change uprobe_perf_print()
to return if hlist_empty(call->perf_events).
Note: this is not uprobe-specific, we can change other users too.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
uprobe_perf_print() passes addr=ip to perf_trace_buf_submit() for
no reason. This sets perf_sample_data->addr for PERF_SAMPLE_ADDR,
we already have perf_sample_data->ip initialized if PERF_SAMPLE_IP.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Finally change create_trace_uprobe() to check if argv[0][0] == 'r'
and pass the correct "is_ret" to alloc_trace_uprobe().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Tested-by: Anton Arapov <anton@redhat.com>
Change probes_seq_show() and print_uprobe_event() to check
is_ret_probe() and print the correct data.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Tested-by: Anton Arapov <anton@redhat.com>
Change uprobe_event_define_fields(), and __set_print_fmt() to check
is_ret_probe() and use the appropriate format/fields.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Tested-by: Anton Arapov <anton@redhat.com>
Change uprobe_trace_print() and uprobe_perf_print() to check
is_ret_probe() and fill ring_buffer_event accordingly.
Also change uprobe_trace_func() and uprobe_perf_func() to not
_print() if is_ret_probe() is true. Note that we keep ->handler()
nontrivial even for uretprobe, we need this for filtering and for
other potential extensions.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Tested-by: Anton Arapov <anton@redhat.com>
Create the new functions we need to support uretprobes, and change
alloc_trace_uprobe() to initialize consumer.ret_handler if the new
"is_ret" argument is true. Curently this argument is always false,
so the new code is never called and is_ret_probe(tu) is false too.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Tested-by: Anton Arapov <anton@redhat.com>
Extract the output code from uprobe_trace_func() and uprobe_perf_func()
into the new helpers, they will be used by ->ret_handler() too. We also
add the unused "unsigned long func" argument in advance, to simplify the
next changes.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Tested-by: Anton Arapov <anton@redhat.com>
struct uprobe_trace_entry_head has a single member for reporting,
"unsigned long ip". If we want to support uretprobes we need to
create another struct which has "func" and "ret_ip" and duplicate
a lot of functions, like trace_kprobe.c does.
To avoid this copy-and-paste horror we turn ->ip into ->vaddr[]
and add couple of trivial helpers to calculate sizeof/data. This
uglifies the code a bit, but this allows us to avoid a lot more
complications later, when we add the support for ret-probes.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Tested-by: Anton Arapov <anton@redhat.com>
uprobe_trace_func() is never called with irqs or preemption
disabled, no need to ask preempt_count() or local_save_flags().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Anton Arapov <anton@redhat.com>
seq_print_ip_sym(ip) in print_uprobe_event() is pointless,
kallsyms_lookup(ip) can not resolve a user-space address.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Tested-by: Anton Arapov <anton@redhat.com>
uprobe_trace_func() and uprobe_perf_func() do not need task_pt_regs(),
we already have "struct pt_regs *regs".
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Tested-by: Anton Arapov <anton@redhat.com>
