Now that all users of the deprecated ablkcipher interface have been
moved to the skcipher interface, ablkcipher is no longer used and
can be removed.
Reviewed-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reimplement the library routines to perform chacha20poly1305 en/decryption
on scatterlists, without [ab]using the [deprecated] blkcipher interface,
which is rather heavyweight and does things we don't really need.
Instead, we use the sg_miter API in a novel and clever way, to iterate
over the scatterlist in-place (i.e., source == destination, which is the
only way this library is expected to be used). That way, we don't have to
iterate over two scatterlists in parallel.
Another optimization is that, instead of relying on the blkcipher walker
to present the input in suitable chunks, we recognize that ChaCha is a
streamcipher, and so we can simply deal with partial blocks by keeping a
block of cipherstream on the stack and use crypto_xor() to mix it with
the in/output.
Finally, we omit the scatterwalk_and_copy() call if the last element of
the scatterlist covers the MAC as well (which is the common case),
avoiding the need to walk the scatterlist and kmap() the page twice.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This incorporates the chacha20poly1305 from the Zinc library, retaining
the library interface, but replacing the implementation with calls into
the code that already existed in the kernel's crypto API.
Note that this library API does not implement RFC7539 fully, given that
it is limited to 64-bit nonces. (The 96-bit nonce version that was part
of the selftest only has been removed, along with the 96-bit nonce test
vectors that only tested the selftest but not the actual library itself)
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This contains two formally verified C implementations of the Curve25519
scalar multiplication function, one for 32-bit systems, and one for
64-bit systems whose compiler supports efficient 128-bit integer types.
Not only are these implementations formally verified, but they are also
the fastest available C implementations. They have been modified to be
friendly to kernel space and to be generally less horrendous looking,
but still an effort has been made to retain their formally verified
characteristic, and so the C might look slightly unidiomatic.
The 64-bit version comes from HACL*: https://github.com/project-everest/hacl-star
The 32-bit version comes from Fiat: https://github.com/mit-plv/fiat-crypto
Information: https://cr.yp.to/ecdh.html
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
[ardb: - move from lib/zinc to lib/crypto
- replace .c #includes with Kconfig based object selection
- drop simd handling and simplify support for per-arch versions ]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Wire up our newly added Blake2s implementation via the shash API.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The C implementation was originally based on Samuel Neves' public
domain reference implementation but has since been heavily modified
for the kernel. We're able to do compile-time optimizations by moving
some scaffolding around the final function into the header file.
Information: https://blake2.net/
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Samuel Neves <sneves@dei.uc.pt>
Co-developed-by: Samuel Neves <sneves@dei.uc.pt>
[ardb: - move from lib/zinc to lib/crypto
- remove simd handling
- rewrote selftest for better coverage
- use fixed digest length for blake2s_hmac() and rename to
blake2s256_hmac() ]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove the dependency on the generic Poly1305 driver. Instead, depend
on the generic library so that we only reuse code without pulling in
the generic skcipher implementation as well.
While at it, remove the logic that prefers the non-SIMD path for short
inputs - this is no longer necessary after recent FPU handling changes
on x86.
Since this removes the last remaining user of the routines exported
by the generic shash driver, unexport them and make them static.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Expose the existing generic Poly1305 code via a init/update/final
library interface so that callers are not required to go through
the crypto API's shash abstraction to access it. At the same time,
make some preparations so that the library implementation can be
superseded by an accelerated arch-specific version in the future.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In preparation of exposing a Poly1305 library interface directly from
the accelerated x86 driver, align the state descriptor of the x86 code
with the one used by the generic driver. This is needed to make the
library interface unified between all implementations.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Move the core Poly1305 routines shared between the generic Poly1305
shash driver and the Adiantum and NHPoly1305 drivers into a separate
library so that using just this pieces does not pull in the crypto
API pieces of the generic Poly1305 routine.
In a subsequent patch, we will augment this generic library with
init/update/final routines so that Poyl1305 algorithm can be used
directly without the need for using the crypto API's shash abstraction.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Now that all users of generic ChaCha code have moved to the core library,
there is no longer a need for the generic ChaCha skcpiher driver to
export parts of it implementation for reuse by other drivers. So drop
the exports, and make the symbols static.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Wire the existing x86 SIMD ChaCha code into the new ChaCha library
interface, so that users of the library interface will get the
accelerated version when available.
Given that calls into the library API will always go through the
routines in this module if it is enabled, switch to static keys
to select the optimal implementation available (which may be none
at all, in which case we defer to the generic implementation for
all invocations).
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently, our generic ChaCha implementation consists of a permute
function in lib/chacha.c that operates on the 64-byte ChaCha state
directly [and which is always included into the core kernel since it
is used by the /dev/random driver], and the crypto API plumbing to
expose it as a skcipher.
In order to support in-kernel users that need the ChaCha streamcipher
but have no need [or tolerance] for going through the abstractions of
the crypto API, let's expose the streamcipher bits via a library API
as well, in a way that permits the implementation to be superseded by
an architecture specific one if provided.
So move the streamcipher code into a separate module in lib/crypto,
and expose the init() and crypt() routines to users of the library.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Now that all "blkcipher" algorithms have been converted to "skcipher",
remove the blkcipher algorithm type.
The skcipher (symmetric key cipher) algorithm type was introduced a few
years ago to replace both blkcipher and ablkcipher (synchronous and
asynchronous block cipher). The advantages of skcipher include:
- A much less confusing name, since none of these algorithm types have
ever actually been for raw block ciphers, but rather for all
length-preserving encryption modes including block cipher modes of
operation, stream ciphers, and other length-preserving modes.
- It unified blkcipher and ablkcipher into a single algorithm type
which supports both synchronous and asynchronous implementations.
Note, blkcipher already operated only on scatterlists, so the fact
that skcipher does too isn't a regression in functionality.
- Better type safety by using struct skcipher_alg, struct
crypto_skcipher, etc. instead of crypto_alg, crypto_tfm, etc.
- It sometimes simplifies the implementations of algorithms.
Also, the blkcipher API was no longer being tested.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
crypto_has_skcipher() and crypto_has_skcipher2() do the same thing: they
check for the availability of an algorithm of type skcipher, blkcipher,
or ablkcipher, which also meets any non-type constraints the caller
specified. And they have exactly the same prototype.
Therefore, eliminate the redundancy by removing crypto_has_skcipher()
and renaming crypto_has_skcipher2() to crypto_has_skcipher().
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When algif_skcipher does a partial operation it always process data
that is a multiple of blocksize. However, for algorithms such as
CTR this is wrong because even though it can process any number of
bytes overall, the partial block must come at the very end and not
in the middle.
This is exactly what chunksize is meant to describe so this patch
changes blocksize to chunksize.
Fixes: 8ff590903d ("crypto: algif_skcipher - User-space...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pull integrity updates from Mimi Zohar:
"The major feature in this time is IMA support for measuring and
appraising appended file signatures. In addition are a couple of bug
fixes and code cleanup to use struct_size().
In addition to the PE/COFF and IMA xattr signatures, the kexec kernel
image may be signed with an appended signature, using the same
scripts/sign-file tool that is used to sign kernel modules.
Similarly, the initramfs may contain an appended signature.
This contained a lot of refactoring of the existing appended signature
verification code, so that IMA could retain the existing framework of
calculating the file hash once, storing it in the IMA measurement list
and extending the TPM, verifying the file's integrity based on a file
hash or signature (eg. xattrs), and adding an audit record containing
the file hash, all based on policy. (The IMA support for appended
signatures patch set was posted and reviewed 11 times.)
The support for appended signature paves the way for adding other
signature verification methods, such as fs-verity, based on a single
system-wide policy. The file hash used for verifying the signature and
the signature, itself, can be included in the IMA measurement list"
* 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
ima: ima_api: Use struct_size() in kzalloc()
ima: use struct_size() in kzalloc()
sefltest/ima: support appended signatures (modsig)
ima: Fix use after free in ima_read_modsig()
MODSIGN: make new include file self contained
ima: fix freeing ongoing ahash_request
ima: always return negative code for error
ima: Store the measurement again when appraising a modsig
ima: Define ima-modsig template
ima: Collect modsig
ima: Implement support for module-style appended signatures
ima: Factor xattr_verify() out of ima_appraise_measurement()
ima: Add modsig appraise_type option for module-style appended signatures
integrity: Select CONFIG_KEYS instead of depending on it
PKCS#7: Introduce pkcs7_get_digest()
PKCS#7: Refactor verify_pkcs7_signature()
MODSIGN: Export module signature definitions
ima: initialize the "template" field with the default template
After starting a skcipher walk, the only way to ensure that all
resources it has tied up are released is to complete it. In some
cases, it will be useful to be able to abort a walk cleanly after
it has started, so add this ability to the skcipher walk API.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
lib/crypto/sha256.c and include/crypto/sha256_base.h define
99% identical functions to init a sha256_state struct for sha224 or
sha256 use.
This commit moves the functions from lib/crypto/sha256.c to
include/crypto/sha.h (making them static inline) and makes the
sha224/256_base_init static inline functions from
include/crypto/sha256_base.h wrappers around the now also
static inline include/crypto/sha.h functions.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The generic sha256 implementation from lib/crypto/sha256.c uses data
structs defined in crypto/sha.h, so lets move the function prototypes
there too.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add sha224 support to the lib/crypto/sha256 library code. This will allow
us to replace both the sha256 and sha224 parts of crypto/sha256_generic.c
when we remove the code duplication in further patches in this series.
Suggested-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Before this commit lib/crypto/sha256.c has only been used in the s390 and
x86 purgatory code, make it suitable for generic use:
* Export interesting symbols
* Add -D__DISABLE_EXPORTS to CFLAGS_sha256.o for purgatory builds to
avoid the exports for the purgatory builds
* Add to lib/crypto/Makefile and crypto/Kconfig
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Generic crypto implementations belong under lib/crypto not directly in
lib, likewise the header should be in include/crypto, not include/linux.
Note that the code in lib/crypto/sha256.c is not yet available for
generic use after this commit, it is still only used by the s390 and x86
purgatory code. Making it suitable for generic use is done in further
patches in this series.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Another one for the cipher museum: split off DES core processing into
a separate module so other drivers (mostly for crypto accelerators)
can reuse the code without pulling in the generic DES cipher itself.
This will also permit the cipher interface to be made private to the
crypto API itself once we move the only user in the kernel (CIFS) to
this library interface.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove the old DES3 verification functions that are no longer used.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The recently added helper routine to perform key strength validation
of triple DES keys is slightly inadequate, since it comes in two versions,
neither of which are highly useful for anything other than skciphers (and
many drivers still use the older blkcipher interfaces).
So let's add a new helper and, considering that this is a helper function
that is only intended to be used by crypto code itself, put it in a new
des.h header under crypto/internal.
While at it, implement a similar helper for single DES, so that we can
start replacing the pattern of calling des_ekey() into a temp buffer
that occurs in many drivers in drivers/crypto.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add inline helper function to check key length for AES algorithms.
The key can be 128, 192 or 256 bits size.
This function is used in the generic aes implementation.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Added inline helper functions to check authsize and assoclen for
gcm, rfc4106 and rfc4543.
These are used in the generic implementation of gcm, rfc4106 and
rfc4543.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
IMA will need to access the digest of the PKCS7 message (as calculated by
the kernel) before the signature is verified, so introduce
pkcs7_get_digest() for that purpose.
Also, modify pkcs7_digest() to detect when the digest was already
calculated so that it doesn't have to do redundant work. Verifying that
sinfo->sig->digest isn't NULL is sufficient because both places which
allocate sinfo->sig (pkcs7_parse_message() and pkcs7_note_signed_info())
use kzalloc() so sig->digest is always initialized to zero.
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Cc: David Howells <dhowells@redhat.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
While looking at CONFIG_PREEMPT dependencies treewide the #ifdef in
crypto_yield() matched.
CONFIG_PREEMPT and CONFIG_PREEMPT_VOLUNTARY are mutually exclusive so the
extra !CONFIG_PREEMPT conditional is redundant.
cond_resched() has only an effect when CONFIG_PREEMPT_VOLUNTARY is set,
otherwise it's a stub which the compiler optimizes out.
Remove the whole conditional.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-crypto@vger.kernel.org
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Function definitions in headers are usually marked as 'static inline'.
Since 'inline' is missing for crypto_reportstat(), if it were not
referenced from a .c file that includes this header, it would produce
a warning.
Also, 'struct crypto_user_alg' is not declared in this header.
I included <linux/crytouser.h> instead of adding the forward declaration
as suggested [1].
Detected by compile-testing this header as a standalone unit:
./include/crypto/internal/cryptouser.h:6:44: warning: ‘struct crypto_user_alg’ declared inside parameter list will not be visible outside of this definition or declaration
struct crypto_alg *crypto_alg_match(struct crypto_user_alg *p, int exact);
^~~~~~~~~~~~~~~
./include/crypto/internal/cryptouser.h:11:12: warning: ‘crypto_reportstat’ defined but not used [-Wunused-function]
static int crypto_reportstat(struct sk_buff *in_skb, struct nlmsghdr *in_nlh, struct nlattr **attrs)
^~~~~~~~~~~~~~~~~
[1] https://lkml.org/lkml/2019/6/13/1121
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add header include guards in case they are included multiple times.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
To help avoid confusion, add a comment to ghash-generic.c which explains
the convention that the kernel's implementation of GHASH uses.
Also update the Kconfig help text and module descriptions to call GHASH
a "hash function" rather than a "message digest", since the latter
normally means a real cryptographic hash function, which GHASH is not.
Cc: Pascal Van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Pascal Van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently, NETLINK_CRYPTO works only in the init network namespace. It
doesn't make much sense to cut it out of the other network namespaces,
so do the minor plumbing work necessary to make it work in any network
namespace. Code inspired by net/core/sock_diag.c.
Tested using kcapi-dgst from libkcapi [1]:
Before:
# unshare -n kcapi-dgst -c sha256 </dev/null | wc -c
libkcapi - Error: Netlink error: sendmsg failed
libkcapi - Error: Netlink error: sendmsg failed
libkcapi - Error: NETLINK_CRYPTO: cannot obtain cipher information for hmac(sha512) (is required crypto_user.c patch missing? see documentation)
0
After:
# unshare -n kcapi-dgst -c sha256 </dev/null | wc -c
32
[1] https://github.com/smuellerDD/libkcapi
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
MORUS was not selected as a winner in the CAESAR competition, which
is not surprising since it is considered to be cryptographically
broken [0]. (Note that this is not an implementation defect, but a
flaw in the underlying algorithm). Since it is unlikely to be in use
currently, let's remove it before we're stuck with it.
[0] https://eprint.iacr.org/2019/172.pdf
Reviewed-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There are a few copies of the AES S-boxes floating around, so export
the ones from the AES library so that we can reuse them in other
modules.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The versions of the AES lookup tables that are only used during the last
round are never used outside of the driver, so there is no need to
export their symbols.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add a static inline helper modeled after crypto_cbc_encrypt_walk()
that can be reused for SIMD algorithms that need to implement a
non-SIMD fallback for performing CTR encryption.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Drop aes-generic's version of crypto_aes_expand_key(), and switch to
the key expansion routine provided by the AES library. AES key expansion
is not performance critical, and it is better to have a single version
shared by all AES implementations.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Take the existing small footprint and mostly time invariant C code
and turn it into a AES library that can be used for non-performance
critical, casual use of AES, and as a fallback for, e.g., SIMD code
that needs a secondary path that can be taken in contexts where the
SIMD unit is off limits (e.g., in hard interrupts taken from kernel
context)
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pull crypto updates from Herbert Xu:
"Here is the crypto update for 5.3:
API:
- Test shash interface directly in testmgr
- cra_driver_name is now mandatory
Algorithms:
- Replace arc4 crypto_cipher with library helper
- Implement 5 way interleave for ECB, CBC and CTR on arm64
- Add xxhash
- Add continuous self-test on noise source to drbg
- Update jitter RNG
Drivers:
- Add support for SHA204A random number generator
- Add support for 7211 in iproc-rng200
- Fix fuzz test failures in inside-secure
- Fix fuzz test failures in talitos
- Fix fuzz test failures in qat"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (143 commits)
crypto: stm32/hash - remove interruptible condition for dma
crypto: stm32/hash - Fix hmac issue more than 256 bytes
crypto: stm32/crc32 - rename driver file
crypto: amcc - remove memset after dma_alloc_coherent
crypto: ccp - Switch to SPDX license identifiers
crypto: ccp - Validate the the error value used to index error messages
crypto: doc - Fix formatting of new crypto engine content
crypto: doc - Add parameter documentation
crypto: arm64/aes-ce - implement 5 way interleave for ECB, CBC and CTR
crypto: arm64/aes-ce - add 5 way interleave routines
crypto: talitos - drop icv_ool
crypto: talitos - fix hash on SEC1.
crypto: talitos - move struct talitos_edesc into talitos.h
lib/scatterlist: Fix mapping iterator when sg->offset is greater than PAGE_SIZE
crypto/NX: Set receive window credits to max number of CRBs in RxFIFO
crypto: asymmetric_keys - select CRYPTO_HASH where needed
crypto: serpent - mark __serpent_setkey_sbox noinline
crypto: testmgr - dynamically allocate crypto_shash
crypto: testmgr - dynamically allocate testvec_config
crypto: talitos - eliminate unneeded 'done' functions at build time
...
Refactor the core rc4 handling so we can move most users to a library
interface, permitting us to drop the cipher interface entirely in a
future patch. This is part of an effort to simplify the crypto API
and improve its robustness against incorrect use.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Based on 2 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation #
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 4122 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with this program if not see http www gnu org
licenses
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 503 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Enrico Weigelt <info@metux.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190602204653.811534538@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Constify the ctx and iv arguments to crypto_chacha_init() and the
various chacha*_stream_xor() functions. This makes it clear that they
are not modified.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The 'chunksize' and 'walksize' properties of skcipher algorithms are
implementation details that users of the skcipher API should not be
looking at. So move their accessor functions from <crypto/skcipher.h>
to <crypto/internal/skcipher.h>.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
crypto_skcipher_encrypt() and crypto_skcipher_decrypt() have grown to be
more than a single indirect function call. They now also check whether
a key has been set, and with CONFIG_CRYPTO_STATS=y they also update the
crypto statistics. That can add up to a lot of bloat at every call
site. Moreover, these always involve a function call anyway, which
greatly limits the benefits of inlining.
So change them to be non-inline.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
crypto_aead_encrypt() and crypto_aead_decrypt() have grown to be more
than a single indirect function call. They now also check whether a key
has been set, the decryption side checks whether the input is at least
as long as the authentication tag length, and with CONFIG_CRYPTO_STATS=y
they also update the crypto statistics. That can add up to a lot of
bloat at every call site. Moreover, these always involve a function
call anyway, which greatly limits the benefits of inlining.
So change them to be non-inline.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
