Commit Graph

2055 Commits

Author SHA1 Message Date
Paolo Bonzini
7495e22bb1 KVM: Move running VCPU from ARM to common code
For ring-based dirty log tracking, it will be more efficient to account
writes during schedule-out or schedule-in to the currently running VCPU.
We would like to do it even if the write doesn't use the current VCPU's
address space, as is the case for cached writes (see commit 4e335d9e7d,
"Revert "KVM: Support vCPU-based gfn->hva cache"", 2017-05-02).

Therefore, add a mechanism to track the currently-loaded kvm_vcpu struct.
There is already something similar in KVM/ARM; one important difference
is that kvm_arch_vcpu_{load,put} have two callers in virt/kvm/kvm_main.c:
we have to update both the architecture-independent vcpu_{load,put} and
the preempt notifiers.

Another change made in the process is to allow using kvm_get_running_vcpu()
in preemptible code.  This is allowed because preempt notifiers ensure
that the value does not change even after the VCPU thread is migrated.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-01-27 19:59:54 +01:00
Peter Xu
fcd97ad58f KVM: Add build-time error check on kvm_run size
It's already going to reach 2400 Bytes (which is over half of page
size on 4K page archs), so maybe it's good to have this build-time
check in case it overflows when adding new fields.

Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-01-27 19:59:52 +01:00
Peter Xu
ef82eddc0e KVM: Remove kvm_read_guest_atomic()
Remove kvm_read_guest_atomic() because it's not used anywhere.

Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-01-27 19:59:51 +01:00
Sean Christopherson
8bd826d629 KVM: Move vcpu->run page allocation out of kvm_vcpu_init()
Open code the allocation and freeing of the vcpu->run page in
kvm_vm_ioctl_create_vcpu() and kvm_vcpu_destroy() respectively.  Doing
so allows kvm_vcpu_init() to be a pure init function and eliminates
kvm_vcpu_uninit() entirely.

Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-01-27 19:59:34 +01:00
Sean Christopherson
9941d224fb KVM: Move putting of vcpu->pid to kvm_vcpu_destroy()
Move the putting of vcpu->pid to kvm_vcpu_destroy().  vcpu->pid is
guaranteed to be NULL when kvm_vcpu_uninit() is called in the error path
of kvm_vm_ioctl_create_vcpu(), e.g. it is explicitly nullified by
kvm_vcpu_init() and is only changed by KVM_RUN.

No functional change intended.

Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-01-27 19:59:33 +01:00
Sean Christopherson
ddd259c9aa KVM: Drop kvm_arch_vcpu_init() and kvm_arch_vcpu_uninit()
Remove kvm_arch_vcpu_init() and kvm_arch_vcpu_uninit() now that all
arch specific implementations are nops.

Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-01-27 19:59:33 +01:00
Sean Christopherson
19bcc89eb8 KVM: arm64: Free sve_state via arm specific hook
Add an arm specific hook to free the arm64-only sve_state.  Doing so
eliminates the last functional code from kvm_arch_vcpu_uninit() across
all architectures and paves the way for removing kvm_arch_vcpu_init()
and kvm_arch_vcpu_uninit() entirely.

Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-01-27 19:59:32 +01:00
Sean Christopherson
39a93a8794 KVM: ARM: Move all vcpu init code into kvm_arch_vcpu_create()
Fold init() into create() now that the two are called back-to-back by
common KVM code (kvm_vcpu_init() calls kvm_arch_vcpu_init() as its last
action, and kvm_vm_ioctl_create_vcpu() calls kvm_arch_vcpu_create()
immediately thereafter).  This paves the way for removing
kvm_arch_vcpu_{un}init() entirely.

Note, there is no associated unwinding in kvm_arch_vcpu_uninit() that
needs to be relocated (to kvm_arch_vcpu_destroy()).

No functional change intended.

Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-01-27 19:59:30 +01:00
Sean Christopherson
afede96df5 KVM: Drop kvm_arch_vcpu_setup()
Remove kvm_arch_vcpu_setup() now that all arch specific implementations
are nops.

Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-01-27 19:59:28 +01:00
Sean Christopherson
d5c48debcc KVM: Move initialization of preempt notifier to kvm_vcpu_init()
Initialize the preempt notifier immediately in kvm_vcpu_init() to pave
the way for removing kvm_arch_vcpu_setup(), i.e. to allow arch specific
code to call vcpu_load() during kvm_arch_vcpu_create().

Back when preemption support was added, the location of the call to init
the preempt notifier was perfectly sane.  The overall vCPU creation flow
featured a single arch specific hook and the preempt notifer was used
immediately after its initialization (by vcpu_load()).  E.g.:

        vcpu = kvm_arch_ops->vcpu_create(kvm, n);
        if (IS_ERR(vcpu))
                return PTR_ERR(vcpu);

        preempt_notifier_init(&vcpu->preempt_notifier, &kvm_preempt_ops);

        vcpu_load(vcpu);
        r = kvm_mmu_setup(vcpu);
        vcpu_put(vcpu);
        if (r < 0)
                goto free_vcpu;

Today, the call to preempt_notifier_init() is sandwiched between two
arch specific calls, kvm_arch_vcpu_create() and kvm_arch_vcpu_setup(),
which needlessly forces x86 (and possibly others?) to split its vCPU
creation flow.  Init the preempt notifier prior to any arch specific
call so that each arch can independently decide how best to organize
its creation flow.

Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-01-27 19:59:25 +01:00
Sean Christopherson
aaba298c6b KVM: Unexport kvm_vcpu_cache and kvm_vcpu_{un}init()
Unexport kvm_vcpu_cache and kvm_vcpu_{un}init() and make them static
now that they are referenced only in kvm_main.c.

Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-01-27 19:59:24 +01:00
Sean Christopherson
e529ef66e6 KVM: Move vcpu alloc and init invocation to common code
Now that all architectures tightly couple vcpu allocation/free with the
mandatory calls to kvm_{un}init_vcpu(), move the sequences verbatim to
common KVM code.

Move both allocation and initialization in a single patch to eliminate
thrash in arch specific code.  The bisection benefits of moving the two
pieces in separate patches is marginal at best, whereas the odds of
introducing a transient arch specific bug are non-zero.

Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-01-27 19:59:20 +01:00
Sean Christopherson
4543bdc088 KVM: Introduce kvm_vcpu_destroy()
Add kvm_vcpu_destroy() and wire up all architectures to call the common
function instead of their arch specific implementation.  The common
destruction function will be used by future patches to move allocation
and initialization of vCPUs to common KVM code, i.e. to free resources
that are allocated by arch agnostic code.

No functional change intended.

Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-01-24 09:19:11 +01:00
Sean Christopherson
897cc38eaa KVM: Add kvm_arch_vcpu_precreate() to handle pre-allocation issues
Add a pre-allocation arch hook to handle checks that are currently done
by arch specific code prior to allocating the vCPU object.  This paves
the way for moving the allocation to common KVM code.

Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-01-24 09:19:07 +01:00
Sean Christopherson
4b8fff780b KVM: arm: Drop kvm_arch_vcpu_free()
Remove the superfluous kvm_arch_vcpu_free() as it is no longer called
from commmon KVM code.  Note, kvm_arch_vcpu_destroy() *is* called from
common code, i.e. choosing which function to whack is not completely
arbitrary.

Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-01-24 09:19:03 +01:00
James Morse
21aecdbd7f KVM: arm: Make inject_abt32() inject an external abort instead
KVM's inject_abt64() injects an external-abort into an aarch64 guest.
The KVM_CAP_ARM_INJECT_EXT_DABT is intended to do exactly this, but
for an aarch32 guest inject_abt32() injects an implementation-defined
exception, 'Lockdown fault'.

Change this to external abort. For non-LPAE we now get the documented:
| Unhandled fault: external abort on non-linefetch (0x008) at 0x9c800f00
and for LPAE:
| Unhandled fault: synchronous external abort (0x210) at 0x9c800f00

Fixes: 74a64a9816 ("KVM: arm/arm64: Unify 32bit fault injection")
Reported-by: Beata Michalska <beata.michalska@linaro.org>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200121123356.203000-3-james.morse@arm.com
2020-01-23 10:38:15 +00:00
James Morse
018f22f95e KVM: arm: Fix DFSR setting for non-LPAE aarch32 guests
Beata reports that KVM_SET_VCPU_EVENTS doesn't inject the expected
exception to a non-LPAE aarch32 guest.

The host intends to inject DFSR.FS=0x14 "IMPLEMENTATION DEFINED fault
(Lockdown fault)", but the guest receives DFSR.FS=0x04 "Fault on
instruction cache maintenance". This fault is hooked by
do_translation_fault() since ARMv6, which goes on to silently 'handle'
the exception, and restart the faulting instruction.

It turns out, when TTBCR.EAE is clear DFSR is split, and FS[4] has
to shuffle up to DFSR[10].

As KVM only does this in one place, fix up the static values. We
now get the expected:
| Unhandled fault: lock abort (0x404) at 0x9c800f00

Fixes: 74a64a9816 ("KVM: arm/arm64: Unify 32bit fault injection")
Reported-by: Beata Michalska <beata.michalska@linaro.org>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200121123356.203000-2-james.morse@arm.com
2020-01-23 10:38:15 +00:00
Gavin Shan
cf2d23e0ba KVM: arm/arm64: Fix young bit from mmu notifier
kvm_test_age_hva() is called upon mmu_notifier_test_young(), but wrong
address range has been passed to handle_hva_to_gpa(). With the wrong
address range, no young bits will be checked in handle_hva_to_gpa().
It means zero is always returned from mmu_notifier_test_young().

This fixes the issue by passing correct address range to the underly
function handle_hva_to_gpa(), so that the hardware young (access) bit
will be visited.

Fixes: 35307b9a5f ("arm/arm64: KVM: Implement Stage-2 page aging")
Signed-off-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200121055659.19560-1-gshan@redhat.com
2020-01-23 10:38:15 +00:00
Marc Zyngier
0e20f5e255 KVM: arm/arm64: Cleanup MMIO handling
Our MMIO handling is a bit odd, in the sense that it uses an
intermediate per-vcpu structure to store the various decoded
information that describe the access.

But the same information is readily available in the HSR/ESR_EL2
field, and we actually use this field to populate the structure.

Let's simplify the whole thing by getting rid of the superfluous
structure and save a (tiny) bit of space in the vcpu structure.

[32bit fix courtesy of Olof Johansson <olof@lixom.net>]
Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-01-23 10:38:14 +00:00
Paolo Bonzini
4425f567b0 KVM: async_pf: drop kvm_arch_async_page_present wrappers
The wrappers make it less clear that the position of the call
to kvm_arch_async_page_present depends on the architecture, and
that only one of the two call sites will actually be active.
Remove them.

Cc: Andy Lutomirski <luto@kernel.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-01-23 09:51:08 +01:00
Milan Pandurov
09cbcef6c6 kvm: Refactor handling of VM debugfs files
We can store reference to kvm_stats_debugfs_item instead of copying
its values to kvm_stat_data.
This allows us to remove duplicated code and usage of temporary
kvm_stat_data inside vm_stat_get et al.

Signed-off-by: Milan Pandurov <milanpa@amazon.de>
Reviewed-by: Alexander Graf <graf@amazon.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-01-21 14:45:33 +01:00
Miaohe Lin
311497e0c5 KVM: Fix some writing mistakes
Fix some writing mistakes in the comments.

Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-01-21 13:57:44 +01:00
Miaohe Lin
00116795aa KVM: Fix some grammar mistakes
Fix some grammar mistakes in the comments.

Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-01-21 13:57:37 +01:00
Miaohe Lin
668effb63d KVM: Fix some wrong function names in comment
Fix some wrong function names in comment. mmu_check_roots is a typo for
mmu_check_root, vmcs_read_any should be vmcs12_read_any and so on.

Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-01-21 13:57:23 +01:00
Zenghui Yu
31a9b0b11b KVM: arm/arm64: vgic: Drop the kvm_vgic_register_mmio_region()
kvm_vgic_register_mmio_region() was introduced in commit 4493b1c486
("KVM: arm/arm64: vgic-new: Add MMIO handling framework") but never
used, and even never implemented. Remove it to avoid confusing readers.

Reported-by: Haibin Wang <wanghaibin.wang@huawei.com>
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200119090604.398-1-yuzenghui@huawei.com
2020-01-19 18:06:24 +00:00
Zenghui Yu
821c10c2ae KVM: arm/arm64: vgic-its: Properly check the unmapped coll in DISCARD handler
Discard is supposed to fail if the collection is not mapped to any
target redistributor. We currently check if the collection is mapped
by "ite->collection" but this is incomplete (e.g., mapping a LPI to
an unmapped collection also results in a non NULL ite->collection).
What actually needs to be checked is its_is_collection_mapped(), let's
turn to it.

Also take this chance to remove an extra blank line.

Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20200114112212.1411-1-yuzenghui@huawei.com
2020-01-19 18:06:20 +00:00
Mark Rutland
1cfbb484de KVM: arm/arm64: Correct AArch32 SPSR on exception entry
Confusingly, there are three SPSR layouts that a kernel may need to deal
with:

(1) An AArch64 SPSR_ELx view of an AArch64 pstate
(2) An AArch64 SPSR_ELx view of an AArch32 pstate
(3) An AArch32 SPSR_* view of an AArch32 pstate

When the KVM AArch32 support code deals with SPSR_{EL2,HYP}, it's either
dealing with  or  consistently. On arm64 the PSR_AA32_* definitions
match the AArch64 SPSR_ELx view, and on arm the PSR_AA32_* definitions
match the AArch32 SPSR_* view.

However, when we inject an exception into an AArch32 guest, we have to
synthesize the AArch32 SPSR_* that the guest will see. Thus, an AArch64
host needs to synthesize layout  from layout .

This patch adds a new host_spsr_to_spsr32() helper for this, and makes
use of it in the KVM AArch32 support code. For arm64 we need to shuffle
the DIT bit around, and remove the SS bit, while for arm we can use the
value as-is.

I've open-coded the bit manipulation for now to avoid having to rework
the existing PSR_* definitions into PSR64_AA32_* and PSR32_AA32_*
definitions. I hope to perform a more thorough refactoring in future so
that we can handle pstate view manipulation more consistently across the
kernel tree.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200108134324.46500-4-mark.rutland@arm.com
2020-01-19 18:06:14 +00:00
Mark Rutland
3c2483f154 KVM: arm/arm64: Correct CPSR on exception entry
When KVM injects an exception into a guest, it generates the CPSR value
from scratch, configuring CPSR.{M,A,I,T,E}, and setting all other
bits to zero.

This isn't correct, as the architecture specifies that some CPSR bits
are (conditionally) cleared or set upon an exception, and others are
unchanged from the original context.

This patch adds logic to match the architectural behaviour. To make this
simple to follow/audit/extend, documentation references are provided,
and bits are configured in order of their layout in SPSR_EL2. This
layout can be seen in the diagram on ARM DDI 0487E.a page C5-426.

Note that this code is used by both arm and arm64, and is intended to
fuction with the SPSR_EL2 and SPSR_HYP layouts.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200108134324.46500-3-mark.rutland@arm.com
2020-01-19 18:06:14 +00:00
James Morse
1559b7583f KVM: arm/arm64: Re-check VMA on detecting a poisoned page
When we check for a poisoned page, we use the VMA to tell userspace
about the looming disaster. But we pass a pointer to this VMA
after having released the mmap_sem, which isn't a good idea.

Instead, stash the shift value that goes with this pfn while
we are holding the mmap_sem.

Reported-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Link: https://lore.kernel.org/r/20191211165651.7889-3-maz@kernel.org
Link: https://lore.kernel.org/r/20191217123809.197392-1-james.morse@arm.com
2020-01-19 18:05:20 +00:00
YueHaibing
de9375634b KVM: arm: Remove duplicate include
Remove duplicate header which is included twice.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20191113014045.15276-1-yuehaibing@huawei.com
2020-01-19 18:03:33 +00:00
Shannon Zhao
c3e35409b5 KVM: ARM: Call hyp_cpu_pm_exit at the right place
It doesn't needs to call hyp_cpu_pm_exit() in init_hyp_mode() when some
error occurs. hyp_cpu_pm_exit() only needs to be called in
kvm_arch_init() if init_subsystems() fails. So move hyp_cpu_pm_exit()
out from teardown_hyp_mode() and call it directly in kvm_arch_init().

Signed-off-by: Shannon Zhao <shannon.zhao@linux.alibaba.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/1575272531-3204-1-git-send-email-shannon.zhao@linux.alibaba.com
2020-01-19 18:03:31 +00:00
Zenghui Yu
5f675c56ed KVM: arm/arm64: vgic: Handle GICR_PENDBASER.PTZ filed as RAZ
Although guest will hardly read and use the PTZ (Pending Table Zero)
bit in GICR_PENDBASER, let us emulate the architecture strictly.
As per IHI 0069E 9.11.30, PTZ field is WO, and reads as 0.

Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20191220111833.1422-1-yuzenghui@huawei.com
2020-01-19 16:05:11 +00:00
Eric Auger
8c58be3449 KVM: arm/arm64: vgic-its: Fix restoration of unmapped collections
Saving/restoring an unmapped collection is a valid scenario. For
example this happens if a MAPTI command was sent, featuring an
unmapped collection. At the moment the CTE fails to be restored.
Only compare against the number of online vcpus if the rdist
base is set.

Fixes: ea1ad53e1e ("KVM: arm64: vgic-its: Collection table save/restore")
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20191213094237.19627-1-eric.auger@redhat.com
2020-01-19 16:05:11 +00:00
Christoffer Dall
b6ae256afd KVM: arm64: Only sign-extend MMIO up to register width
On AArch64 you can do a sign-extended load to either a 32-bit or 64-bit
register, and we should only sign extend the register up to the width of
the register as specified in the operation (by using the 32-bit Wn or
64-bit Xn register specifier).

As it turns out, the architecture provides this decoding information in
the SF ("Sixty-Four" -- how cute...) bit.

Let's take advantage of this with the usual 32-bit/64-bit header file
dance and do the right thing on AArch64 hosts.

Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191212195055.5541-1-christoffer.dall@arm.com
2020-01-19 16:05:10 +00:00
Sean Christopherson
736c291c9f KVM: x86: Use gpa_t for cr2/gpa to fix TDP support on 32-bit KVM
Convert a plethora of parameters and variables in the MMU and page fault
flows from type gva_t to gpa_t to properly handle TDP on 32-bit KVM.

Thanks to PSE and PAE paging, 32-bit kernels can access 64-bit physical
addresses.  When TDP is enabled, the fault address is a guest physical
address and thus can be a 64-bit value, even when both KVM and its guest
are using 32-bit virtual addressing, e.g. VMX's VMCS.GUEST_PHYSICAL is a
64-bit field, not a natural width field.

Using a gva_t for the fault address means KVM will incorrectly drop the
upper 32-bits of the GPA.  Ditto for gva_to_gpa() when it is used to
translate L2 GPAs to L1 GPAs.

Opportunistically rename variables and parameters to better reflect the
dual address modes, e.g. use "cr2_or_gpa" for fault addresses and plain
"addr" instead of "vaddr" when the address may be either a GVA or an L2
GPA.  Similarly, use "gpa" in the nonpaging_page_fault() flows to avoid
a confusing "gpa_t gva" declaration; this also sets the stage for a
future patch to combing nonpaging_page_fault() and tdp_page_fault() with
minimal churn.

Sprinkle in a few comments to document flows where an address is known
to be a GVA and thus can be safely truncated to a 32-bit value.  Add
WARNs in kvm_handle_page_fault() and FNAME(gva_to_gpa_nested)() to help
document such cases and detect bugs.

Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-01-08 18:16:02 +01:00
Miaohe Lin
bbfdafa860 KVM: lib: use jump label to handle resource release in irq_bypass_register_producer()
Use out_err jump label to handle resource release. It's a
good practice to release resource in one place and help
eliminate some duplicated code.

Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-01-08 18:16:01 +01:00
Miaohe Lin
8262fe85b4 KVM: lib: use jump label to handle resource release in irq_bypass_register_consumer()
Use out_err jump label to handle resource release. It's a
good practice to release resource in one place and help
eliminate some duplicated code.

Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-01-08 18:16:01 +01:00
Miaohe Lin
d29c03a587 KVM: get rid of var page in kvm_set_pfn_dirty()
We can get rid of unnecessary var page in
kvm_set_pfn_dirty() , thus make code style
similar with kvm_set_pfn_accessed().
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-01-08 17:33:13 +01:00
Paolo Bonzini
d68321dec1 PPC KVM fix for 5.5
- Fix a bug where we try to do an ultracall on a system without an
   ultravisor.
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEv0VLfXa2m9eKuaRpnZrqdyxjcZ8FAl35s5kACgkQnZrqdyxj
 cZ8cwwf/UPCvZIYPSeYvzrCrlA+wlhBAh3bh47+ZXaNybOpss1xZ7QOFGkgoVBkn
 ES2Sdx3qgLvhmbR+nEKon8YCDVSwUj2ehwJu1nzAUzuVYw+m8OHGjdW07+go5KKi
 xZOndwBQGYaaWxch2O8Qw27TZU4lcVY/FNQiti5Ahg9dKK98CLyMsWnTms23ZjGD
 JMN/jCoMxa6godxWk3mSLaIwXj8P1P4pH3oiMFF8ngRTqyMgi1l02wim+DV10rD4
 5JoAF2kzSYngDlrhhQAsSOWrsWst1X2txcHA2QsoL7ZGYUQzzKyHH6zC6dS9eWk4
 ni70RLEnJj8YpsjwT52tFYokxwTPfQ==
 =kPkE
 -----END PGP SIGNATURE-----

Merge tag 'kvm-ppc-fixes-5.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into kvm-master

PPC KVM fix for 5.5

- Fix a bug where we try to do an ultracall on a system without an
  ultravisor.
2019-12-22 13:18:15 +01:00
Paolo Bonzini
f5d5f5fae4 KVM/arm fixes for .5.5, take
- Fix uninitialised sysreg accessor
 - Fix handling of demand-paged device mappings
 - Stop spamming the console on IMPDEF sysregs
 - Relax mappings of writable memslots
 - Assorted cleanups
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCgAtFiEEn9UcU+C1Yxj9lZw9I9DQutE9ekMFAl3ydlsPHG1hekBrZXJu
 ZWwub3JnAAoJECPQ0LrRPXpDRLIQAIrwXMd5LnXS62AFmDtze1Q4uFsRf1RsUJBY
 P5ZReCm3VZWt3SncHI7Tuy2VpzvRq1foTOBDe5tTqu2hkbXC0EIvQL/tcbdDTteG
 YInVVs6YiGIQ6GMGIgJTWOVmTHGTft5sEKdYeV2S30N+4drfSUnbUrOqRLs87VJ5
 WvFbl97Jg3CVLEdZ2ZdmxpufqH24WxEm2aGjncBOhKjxj1xokxKUSmxoJ0Zj95o5
 4kkjKkyNG1Gnt07qL2jUV52g7hnSo9NhgNu3XaU6vEv3Xy4YPrbBZwL3gM3f2lKk
 F4AFUDKqaskjWWlNscEYZYhUtd7Sx2s4tqFVQXUbPkBrUorhRHid4r1BiwGYZNb0
 pKB40kVXz8q5ZJV4qKhSQ2qwnyoGBw9LKkiqYqT4Wk0JLqizWjQyfX3bO1XHB2o/
 jz1VojegSrmWg+798osXCyT6Tjvuwyp8cvnY1tM5t2rO0ppTH6EtwAqhpBARou1V
 VOpqIVHI9yx4zok+TIQAZtRSI7eFisJIjSuFrqQkJUKdp7G+W1PM51LTcroZNNyD
 LEUnEPZPbONsH0shl8qV8rt7U2sN4eHSlsDhdaHe0mW2gllFIUbaSljH+IWBnmWV
 phOKFDZnIvE6hySJzCLiCuvRH9OGdEDSFe96cWNjHTa5EEYS0v9BARUO9zpoNcq+
 1w4YLExU
 =jJwo
 -----END PGP SIGNATURE-----

Merge tag 'kvmarm-fixes-5.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master

KVM/arm fixes for .5.5, take 

- Fix uninitialised sysreg accessor
- Fix handling of demand-paged device mappings
- Stop spamming the console on IMPDEF sysregs
- Relax mappings of writable memslots
- Assorted cleanups
2019-12-18 17:47:38 +01:00
Marc Zyngier
6d674e28f6 KVM: arm/arm64: Properly handle faulting of device mappings
A device mapping is normally always mapped at Stage-2, since there
is very little gain in having it faulted in.

Nonetheless, it is possible to end-up in a situation where the device
mapping has been removed from Stage-2 (userspace munmaped the VFIO
region, and the MMU notifier did its job), but present in a userspace
mapping (userpace has mapped it back at the same address). In such
a situation, the device mapping will be demand-paged as the guest
performs memory accesses.

This requires to be careful when dealing with mapping size, cache
management, and to handle potential execution of a device mapping.

Reported-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Alexandru Elisei <alexandru.elisei@arm.com>
Reviewed-by: James Morse <james.morse@arm.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191211165651.7889-2-maz@kernel.org
2019-12-12 16:22:40 +00:00
Jia He
97418e968b KVM: arm/arm64: Remove excessive permission check in kvm_arch_prepare_memory_region
In kvm_arch_prepare_memory_region, arm kvm regards the memory region as
writable if the flag has no KVM_MEM_READONLY, and the vm is readonly if
!VM_WRITE.

But there is common usage for setting kvm memory region as follows:
e.g. qemu side (see the PROT_NONE flag)
1. mmap(NULL, size, PROT_NONE, MAP_ANONYMOUS | MAP_PRIVATE, -1, 0);
   memory_region_init_ram_ptr()
2. re mmap the above area with read/write authority.

Such example is used in virtio-fs qemu codes which hasn't been upstreamed
[1]. But seems we can't forbid this example.

Without this patch, it will cause an EPERM during kvm_set_memory_region()
and cause qemu boot crash.

As told by Ard, "the underlying assumption is incorrect, i.e., that the
value of vm_flags at this point in time defines how the VMA is used
during its lifetime. There may be other cases where a VMA is created
with VM_READ vm_flags that are changed to VM_READ|VM_WRITE later, and
we are currently rejecting this use case as well."

[1] https://gitlab.com/virtio-fs/qemu/blob/5a356e/hw/virtio/vhost-user-fs.c#L488

Suggested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Jia He <justin.he@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Link: https://lore.kernel.org/r/20191206020802.196108-1-justin.he@arm.com
2019-12-06 19:37:48 +00:00
Miaohe Lin
72a610f32e KVM: arm/arm64: vgic: Use wrapper function to lock/unlock all vcpus in kvm_vgic_create()
Use wrapper function lock_all_vcpus()/unlock_all_vcpus()
in kvm_vgic_create() to remove duplicated code dealing
with locking and unlocking all vcpus in a vm.

Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/1575081918-11401-1-git-send-email-linmiaohe@huawei.com
2019-12-06 11:41:38 +00:00
Miaohe Lin
0bda9498dd KVM: arm/arm64: vgic: Fix potential double free dist->spis in __kvm_vgic_destroy()
In kvm_vgic_dist_init() called from kvm_vgic_map_resources(), if
dist->vgic_model is invalid, dist->spis will be freed without set
dist->spis = NULL. And in vgicv2 resources clean up path,
__kvm_vgic_destroy() will be called to free allocated resources.
And dist->spis will be freed again in clean up chain because we
forget to set dist->spis = NULL in kvm_vgic_dist_init() failed
path. So double free would happen.

Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/1574923128-19956-1-git-send-email-linmiaohe@huawei.com
2019-12-06 11:41:29 +00:00
Miaohe Lin
7e0befd521 KVM: arm/arm64: Get rid of unused arg in cpu_init_hyp_mode()
As arg dummy is not really needed, there's no need to pass
NULL when calling cpu_init_hyp_mode(). So clean it up.

Fixes: 67f6919766 ("arm64: kvm: allows kvm cpu hotplug")
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/1574320559-5662-1-git-send-email-linmiaohe@huawei.com
2019-12-06 11:41:18 +00:00
Miaohe Lin
faf0be2216 KVM: Fix jump label out_free_* in kvm_init()
The jump label out_free_1 and out_free_2 deal with
the same stuff, so git rid of one and rename the
label out_free_0a to retain the label name order.

Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-11-23 11:29:17 +01:00
Paolo Bonzini
46f4f0aabc Merge branch 'kvm-tsx-ctrl' into HEAD
Conflicts:
	arch/x86/kvm/vmx/vmx.c
2019-11-21 12:03:40 +01:00
Paolo Bonzini
14edff8831 KVM/arm updates for Linux 5.5:
- Allow non-ISV data aborts to be reported to userspace
 - Allow injection of data aborts from userspace
 - Expose stolen time to guests
 - GICv4 performance improvements
 - vgic ITS emulation fixes
 - Simplify FWB handling
 - Enable halt pool counters
 - Make the emulated timer PREEMPT_RT compliant
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCgAtFiEEn9UcU+C1Yxj9lZw9I9DQutE9ekMFAl3VZ0EPHG1hekBrZXJu
 ZWwub3JnAAoJECPQ0LrRPXpDwikQAJ/lQT97zEKV3dnpD/jjmEic/3QvTGljS4p+
 pbwZAzyoSMc09lAK2pkaGRRc7euPnp4uLdRS4SenToVzmUQCzuxpQEEMdV/wjp4V
 WLQ1WnTEAhYkm7k5MVo4uy3eD7nVWHWXgfQJvzL4EYZ5R/gd9NzBrnAc6LLV6hp9
 0eLXIYrGFa1GESzF6P6sBDJhYpqVUcQlTI8I43kZH3iCC4+OsBxIkhHREZYsELhW
 MZJIM9ZCskg2tvPC4UysaFiGjBYUJNJ0V+fFOrhyGzludP8i8rNRwgA60mznwvNw
 V4N6/gLlkGK7nLqP+noUcU2wTBnIu389TcWWsX47CuDUzawCd8Fb9kX2zYauQSyS
 ujE0uzoo/nhPFysh9OVVeLUZ6o/wotXoMp2t32t1c5h9N1hISEJvAWavMxTY6KzF
 NEn9hWFjNcgBoArz9GKn9p2nBQpCDvu+2SlI4nL/qgZ7lPC4O3U1uq9myCOLj/gu
 Can/u5EAwgyIBDVcEPHV+vP2GjyeERdXprGiG2VJTYlbHsdjgISTR+5Fy32KdGlP
 YygeZxJtzretr3AYsWqD6Mri30FDSoYy9rUOWBpa+ZHbJPac0M+uKOqntV1OxPX9
 QUkmNEdJcDr8fkcKxnEZ/MaZxFTGPp4vfhiT4A7dUkWTFq7ajvGo8IwN1d7PvWxS
 LFMij1Js
 =SxBH
 -----END PGP SIGNATURE-----

Merge tag 'kvmarm-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm updates for Linux 5.5:

- Allow non-ISV data aborts to be reported to userspace
- Allow injection of data aborts from userspace
- Expose stolen time to guests
- GICv4 performance improvements
- vgic ITS emulation fixes
- Simplify FWB handling
- Enable halt pool counters
- Make the emulated timer PREEMPT_RT compliant

Conflicts:
	include/uapi/linux/kvm.h
2019-11-21 09:58:35 +01:00
Radim Krčmář
8750e72a79 KVM: remember position in kvm->vcpus array
Fetching an index for any vcpu in kvm->vcpus array by traversing
the entire array everytime is costly.
This patch remembers the position of each vcpu in kvm->vcpus array
by storing it in vcpus_idx under kvm_vcpu structure.

Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Nitesh Narayan Lal <nitesh@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-11-15 11:44:21 +01:00
Miaohe Lin
b139b5a247 KVM: MMIO: get rid of odd out_err label in kvm_coalesced_mmio_init
The out_err label and var ret is unnecessary, clean them up.

Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-11-15 11:44:01 +01:00
Marc Zyngier
9cb09e7c1c KVM: Add a comment describing the /dev/kvm no_compat handling
Add a comment explaining the rational behind having both
no_compat open and ioctl callbacks to fend off compat tasks.

Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-11-15 10:14:04 +01:00
Marc Zyngier
b9876e6de1 KVM: Forbid /dev/kvm being opened by a compat task when CONFIG_KVM_COMPAT=n
On a system without KVM_COMPAT, we prevent IOCTLs from being issued
by a compat task. Although this prevents most silly things from
happening, it can still confuse a 32bit userspace that is able
to open the kvm device (the qemu test suite seems to be pretty
mad with this behaviour).

Take a more radical approach and return a -ENODEV to the compat
task.

Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-11-13 17:13:12 +01:00
Linus Torvalds
8c5bd25bf4 Bugfixes: unwinding of KVM_CREATE_VM failure,
VT-d posted interrupts, DAX/ZONE_DEVICE,
 module unload/reload.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQEcBAABAgAGBQJdyrEsAAoJEL/70l94x66DIOkH/Asqrh4o4pwfRHWE+9rnM6PI
 j8oFi7Q4eRXJnP4zEMnMbb6xD/BfSH1tWEcPcYgIxD/t0DFx8F92/xsETAJ/Qc5n
 CWpmnhMkJqERlV+GSRuBqnheMo0CEH1Ab1QZKhh5U3//pK3OtGY9WyydJHWcquTh
 bGh2pnxwVZOtIIEmclUUfKjyR2Fu8hJLnQwzWgYZ27UK7J2pLmiiTX0vwQG359Iq
 sDn9ND33pCBW5e/D2mzccRjOJEvzwrumewM1sRDsoAYLJzUjg9+xD83vZDa1d7R6
 gajCDFWVJbPoLvUY+DgsZBwMMlogElimJMT/Zft3ERbCsYJbFvcmwp4JzyxDxQ4=
 =J6KN
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull kvm fixes from Paolo Bonzini:
 "Fix unwinding of KVM_CREATE_VM failure, VT-d posted interrupts,
  DAX/ZONE_DEVICE, and module unload/reload"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: MMU: Do not treat ZONE_DEVICE pages as being reserved
  KVM: VMX: Introduce pi_is_pir_empty() helper
  KVM: VMX: Do not change PID.NDST when loading a blocked vCPU
  KVM: VMX: Consider PID.PIR to determine if vCPU has pending interrupts
  KVM: VMX: Fix comment to specify PID.ON instead of PIR.ON
  KVM: X86: Fix initialization of MSR lists
  KVM: fix placement of refcount initialization
  KVM: Fix NULL-ptr deref after kvm_create_vm fails
2019-11-12 13:19:15 -08:00
Sean Christopherson
a78986aae9 KVM: MMU: Do not treat ZONE_DEVICE pages as being reserved
Explicitly exempt ZONE_DEVICE pages from kvm_is_reserved_pfn() and
instead manually handle ZONE_DEVICE on a case-by-case basis.  For things
like page refcounts, KVM needs to treat ZONE_DEVICE pages like normal
pages, e.g. put pages grabbed via gup().  But for flows such as setting
A/D bits or shifting refcounts for transparent huge pages, KVM needs to
to avoid processing ZONE_DEVICE pages as the flows in question lack the
underlying machinery for proper handling of ZONE_DEVICE pages.

This fixes a hang reported by Adam Borowski[*] in dev_pagemap_cleanup()
when running a KVM guest backed with /dev/dax memory, as KVM straight up
doesn't put any references to ZONE_DEVICE pages acquired by gup().

Note, Dan Williams proposed an alternative solution of doing put_page()
on ZONE_DEVICE pages immediately after gup() in order to simplify the
auditing needed to ensure is_zone_device_page() is called if and only if
the backing device is pinned (via gup()).  But that approach would break
kvm_vcpu_{un}map() as KVM requires the page to be pinned from map() 'til
unmap() when accessing guest memory, unlike KVM's secondary MMU, which
coordinates with mmu_notifier invalidations to avoid creating stale
page references, i.e. doesn't rely on pages being pinned.

[*] http://lkml.kernel.org/r/20190919115547.GA17963@angband.pl

Reported-by: Adam Borowski <kilobyte@angband.pl>
Analyzed-by: David Hildenbrand <david@redhat.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Cc: stable@vger.kernel.org
Fixes: 3565fce3a6 ("mm, x86: get_user_pages() for dax mappings")
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-11-12 10:17:42 +01:00
Paolo Bonzini
e2d3fcaf93 KVM: fix placement of refcount initialization
Reported by syzkaller:

   =============================
   WARNING: suspicious RCU usage
   -----------------------------
   ./include/linux/kvm_host.h:536 suspicious rcu_dereference_check() usage!

   other info that might help us debug this:

   rcu_scheduler_active = 2, debug_locks = 1
   no locks held by repro_11/12688.

   stack backtrace:
   Call Trace:
    dump_stack+0x7d/0xc5
    lockdep_rcu_suspicious+0x123/0x170
    kvm_dev_ioctl+0x9a9/0x1260 [kvm]
    do_vfs_ioctl+0x1a1/0xfb0
    ksys_ioctl+0x6d/0x80
    __x64_sys_ioctl+0x73/0xb0
    do_syscall_64+0x108/0xaa0
    entry_SYSCALL_64_after_hwframe+0x49/0xbe

Commit a97b0e773e (kvm: call kvm_arch_destroy_vm if vm creation fails)
sets users_count to 1 before kvm_arch_init_vm(), however, if kvm_arch_init_vm()
fails, we need to decrease this count.  By moving it earlier, we can push
the decrease to out_err_no_arch_destroy_vm without introducing yet another
error label.

syzkaller source: https://syzkaller.appspot.com/x/repro.c?x=15209b84e00000

Reported-by: syzbot+75475908cd0910f141ee@syzkaller.appspotmail.com
Fixes: a97b0e773e ("kvm: call kvm_arch_destroy_vm if vm creation fails")
Cc: Jim Mattson <jmattson@google.com>
Analyzed-by: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-11-11 15:48:03 +01:00
Paolo Bonzini
8a44119a98 KVM: Fix NULL-ptr deref after kvm_create_vm fails
Reported by syzkaller:

    kasan: CONFIG_KASAN_INLINE enabled
    kasan: GPF could be caused by NULL-ptr deref or user memory access
    general protection fault: 0000 [] PREEMPT SMP KASAN
    CPU: 0 PID: 14727 Comm: syz-executor.3 Not tainted 5.4.0-rc4+ 
    RIP: 0010:kvm_coalesced_mmio_init+0x5d/0x110 arch/x86/kvm/../../../virt/kvm/coalesced_mmio.c:121
    Call Trace:
     kvm_dev_ioctl_create_vm arch/x86/kvm/../../../virt/kvm/kvm_main.c:3446 [inline]
     kvm_dev_ioctl+0x781/0x1490 arch/x86/kvm/../../../virt/kvm/kvm_main.c:3494
     vfs_ioctl fs/ioctl.c:46 [inline]
     file_ioctl fs/ioctl.c:509 [inline]
     do_vfs_ioctl+0x196/0x1150 fs/ioctl.c:696
     ksys_ioctl+0x62/0x90 fs/ioctl.c:713
     __do_sys_ioctl fs/ioctl.c:720 [inline]
     __se_sys_ioctl fs/ioctl.c:718 [inline]
     __x64_sys_ioctl+0x6e/0xb0 fs/ioctl.c:718
     do_syscall_64+0xca/0x5d0 arch/x86/entry/common.c:290
     entry_SYSCALL_64_after_hwframe+0x49/0xbe

Commit 9121923c45 ("kvm: Allocate memslots and buses before calling kvm_arch_init_vm")
moves memslots and buses allocations around, however, if kvm->srcu/irq_srcu fails
initialization, NULL will be returned instead of error code, NULL will not be intercepted
in kvm_dev_ioctl_create_vm() and be dereferenced by kvm_coalesced_mmio_init(), this patch
fixes it.

Moving the initialization is required anyway to avoid an incorrect synchronize_srcu that
was also reported by syzkaller:

 wait_for_completion+0x29c/0x440 kernel/sched/completion.c:136
 __synchronize_srcu+0x197/0x250 kernel/rcu/srcutree.c:921
 synchronize_srcu_expedited kernel/rcu/srcutree.c:946 [inline]
 synchronize_srcu+0x239/0x3e8 kernel/rcu/srcutree.c:997
 kvm_page_track_unregister_notifier+0xe7/0x130 arch/x86/kvm/page_track.c:212
 kvm_mmu_uninit_vm+0x1e/0x30 arch/x86/kvm/mmu.c:5828
 kvm_arch_destroy_vm+0x4a2/0x5f0 arch/x86/kvm/x86.c:9579
 kvm_create_vm arch/x86/kvm/../../../virt/kvm/kvm_main.c:702 [inline]

so do it.

Reported-by: syzbot+89a8060879fa0bd2db4f@syzkaller.appspotmail.com
Reported-by: syzbot+e27e7027eb2b80e44225@syzkaller.appspotmail.com
Fixes: 9121923c45 ("kvm: Allocate memslots and buses before calling kvm_arch_init_vm")
Cc: Jim Mattson <jmattson@google.com>
Cc: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-11-11 15:48:02 +01:00
Marc Zyngier
cd7056ae34 Merge remote-tracking branch 'kvmarm/misc-5.5' into kvmarm/next 2019-11-08 11:27:29 +00:00
Marc Zyngier
ef2e78ddad KVM: arm64: Opportunistically turn off WFI trapping when using direct LPI injection
Just like we do for WFE trapping, it can be useful to turn off
WFI trapping when the physical CPU is not oversubscribed (that
is, the vcpu is the only runnable process on this CPU) *and*
that we're using direct injection of interrupts.

The conditions are reevaluated on each vcpu_load(), ensuring that
we don't switch to this mode on a busy system.

On a GICv4 system, this has the effect of reducing the generation
of doorbell interrupts to zero when the right conditions are
met, which is a huge improvement over the current situation
(where the doorbells are screaming if the CPU ever hits a
blocking WFI).

Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Link: https://lore.kernel.org/r/20191107160412.30301-3-maz@kernel.org
2019-11-08 11:14:36 +00:00
Marc Zyngier
5bd90b0989 KVM: vgic-v4: Track the number of VLPIs per vcpu
In order to find out whether a vcpu is likely to be the target of
VLPIs (and to further optimize the way we deal with those), let's
track the number of VLPIs a vcpu can receive.

This gets implemented with an atomic variable that gets incremented
or decremented on map, unmap and move of a VLPI.

Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Link: https://lore.kernel.org/r/20191107160412.30301-2-maz@kernel.org
2019-11-08 11:13:24 +00:00
Thomas Gleixner
9090825fa9 KVM: arm/arm64: Let the timer expire in hardirq context on RT
The timers are canceled from an preempt-notifier which is invoked with
disabled preemption which is not allowed on PREEMPT_RT.
The timer callback is short so in could be invoked in hard-IRQ context
on -RT.

Let the timer expire on hard-IRQ context even on -RT.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Julien Grall <julien.grall@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20191107095424.16647-1-bigeasy@linutronix.de
2019-11-07 16:13:33 +00:00
Junaid Shahid
1aa9b9572b kvm: x86: mmu: Recovery of shattered NX large pages
The page table pages corresponding to broken down large pages are zapped in
FIFO order, so that the large page can potentially be recovered, if it is
not longer being used for execution.  This removes the performance penalty
for walking deeper EPT page tables.

By default, one large page will last about one hour once the guest
reaches a steady state.

Signed-off-by: Junaid Shahid <junaids@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2019-11-04 20:26:00 +01:00
Junaid Shahid
c57c80467f kvm: Add helper function for creating VM worker threads
Add a function to create a kernel thread associated with a given VM. In
particular, it ensures that the worker thread inherits the priority and
cgroups of the calling thread.

Signed-off-by: Junaid Shahid <junaids@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2019-11-04 12:22:02 +01:00
Jim Mattson
a97b0e773e kvm: call kvm_arch_destroy_vm if vm creation fails
In kvm_create_vm(), if we've successfully called kvm_arch_init_vm(), but
then fail later in the function, we need to call kvm_arch_destroy_vm()
so that it can do any necessary cleanup (like freeing memory).

Fixes: 44a95dae1d ("KVM: x86: Detect and Initialize AVIC support")

Signed-off-by: John Sperbeck <jsperbeck@google.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Junaid Shahid <junaids@google.com>
[Remove dependency on "kvm: Don't clear reference count on
 kvm_create_vm() error path" which was not committed. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-31 12:13:16 +01:00
Zenghui Yu
ca185b2609 KVM: arm/arm64: vgic: Don't rely on the wrong pending table
It's possible that two LPIs locate in the same "byte_offset" but target
two different vcpus, where their pending status are indicated by two
different pending tables.  In such a scenario, using last_byte_offset
optimization will lead KVM relying on the wrong pending table entry.
Let us use last_ptr instead, which can be treated as a byte index into
a pending table and also, can be vcpu specific.

Fixes: 280771252c ("KVM: arm64: vgic-v3: KVM_DEV_ARM_VGIC_SAVE_PENDING_TABLES")
Cc: stable@vger.kernel.org
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20191029071919.177-4-yuzenghui@huawei.com
2019-10-29 13:47:39 +00:00
Zenghui Yu
bad36e4e8c KVM: arm/arm64: vgic: Fix some comments typo
Fix various comments, including wrong function names, grammar mistakes
and specification references.

Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20191029071919.177-3-yuzenghui@huawei.com
2019-10-29 13:47:32 +00:00
Marc Zyngier
8e01d9a396 KVM: arm64: vgic-v4: Move the GICv4 residency flow to be driven by vcpu_load/put
When the VHE code was reworked, a lot of the vgic stuff was moved around,
but the GICv4 residency code did stay untouched, meaning that we come
in and out of residency on each flush/sync, which is obviously suboptimal.

To address this, let's move things around a bit:

- Residency entry (flush) moves to vcpu_load
- Residency exit (sync) moves to vcpu_put
- On blocking (entry to WFI), we "put"
- On unblocking (exit from WFI), we "load"

Because these can nest (load/block/put/load/unblock/put, for example),
we now have per-VPE tracking of the residency state.

Additionally, vgic_v4_put gains a "need doorbell" parameter, which only
gets set to true when blocking because of a WFI. This allows a finer
control of the doorbell, which now also gets disabled as soon as
it gets signaled.

Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20191027144234.8395-2-maz@kernel.org
2019-10-28 16:20:58 +00:00
Jim Mattson
9121923c45 kvm: Allocate memslots and buses before calling kvm_arch_init_vm
This reorganization will allow us to call kvm_arch_destroy_vm in the
event that kvm_create_vm fails after calling kvm_arch_init_vm.

Suggested-by: Junaid Shahid <junaids@google.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Junaid Shahid <junaids@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-25 13:32:33 +02:00
Marc Zyngier
a4b28f5c67 Merge remote-tracking branch 'kvmarm/kvm-arm64/stolen-time' into kvmarm-master/next 2019-10-24 15:04:09 +01:00
Sean Christopherson
149487bdac KVM: Add separate helper for putting borrowed reference to kvm
Add a new helper, kvm_put_kvm_no_destroy(), to handle putting a borrowed
reference[*] to the VM when installing a new file descriptor fails.  KVM
expects the refcount to remain valid in this case, as the in-progress
ioctl() has an explicit reference to the VM.  The primary motiviation
for the helper is to document that the 'kvm' pointer is still valid
after putting the borrowed reference, e.g. to document that doing
mutex(&kvm->lock) immediately after putting a ref to kvm isn't broken.

[*] When exposing a new object to userspace via a file descriptor, e.g.
    a new vcpu, KVM grabs a reference to itself (the VM) prior to making
    the object visible to userspace to avoid prematurely freeing the VM
    in the scenario where userspace immediately closes file descriptor.

Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-22 15:48:30 +02:00
Paolo Bonzini
9800c24e2f KVM/arm fixes for 5.4, take
Special PMU edition:
 
 - Fix cycle counter truncation
 - Fix cycle counter overflow limit on pure 64bit system
 - Allow chained events to be actually functional
 - Correct sample period after overflow
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCgAtFiEEn9UcU+C1Yxj9lZw9I9DQutE9ekMFAl2sMDwPHG1hekBrZXJu
 ZWwub3JnAAoJECPQ0LrRPXpDyWEP/iKeWKFPoFIV2o4buIBSLlNOwPDzEF8pEABx
 Wq5dw3cPEQFx5/n5vABLvUC0SoU6rhEWXseNNlOoo1r0pQzS0GpZ5B6BCuuMtk9X
 DSgBc3YqrRPFVdMSCUtTSiM2en9fuLPSalh819KWqWkeMQg+meRtvjkzoXMh3gYt
 KBeeaJHuwHMNlqjKSKdq4XtdQQUBzN+MbtIGTQ83hYbkvep5Z3AVuvS4CapcpeJE
 OVByj0qcyHY4MG+jcTWPYepRZhAQQj8Joj3Z6hEc0ZVpw11GwqG3PcIryxAlhJp3
 ON5teMeV1PiumR1fA90A6Q3M3tSoyR+5oHjS2Y7Y/W5ao6BBrytBDNtPGLYFQkXh
 DKhyIHxFTNPaziSn1jGuvmZUmK9iDD8qowNCHFspAwoqqajjmb5YyiS/FQvfq+Ga
 Zm5JA+f7jheGJq3zmV8oVdLoLt1ldsJb5iWDFZ/oGxLBZbITKAk5diZx+Jvr7Sgm
 CyC8uoEiaoiQdabUwWymrGfrU1JKjLyKejtp/q4lZGG3e5y3jUn1F7qh7Q+N9eSX
 l2cPPcH2iAcMZdFwBedUNll3JZHm3aSVg03Ub6GoYppzxc+phmr7p+Lzyxtm9dYd
 JUF49yDySaiWkWoMG0sMBVSDml8JyEEEAJ1ypwQdGxlizy5/WFy41a0sxjMnCHjP
 ljAsx/3n
 =ORrS
 -----END PGP SIGNATURE-----

Merge tag 'kvmarm-fixes-5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm fixes for 5.4, take 

Special PMU edition:

- Fix cycle counter truncation
- Fix cycle counter overflow limit on pure 64bit system
- Allow chained events to be actually functional
- Correct sample period after overflow
2019-10-22 13:31:29 +02:00
Wanpeng Li
44551b2f69 KVM: Don't shrink/grow vCPU halt_poll_ns if host side polling is disabled
Don't waste cycles to shrink/grow vCPU halt_poll_ns if host
side polling is disabled.

Acked-by: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-22 13:31:14 +02:00
Steven Price
58772e9a3d KVM: arm64: Provide VCPU attributes for stolen time
Allow user space to inform the KVM host where in the physical memory
map the paravirtualized time structures should be located.

User space can set an attribute on the VCPU providing the IPA base
address of the stolen time structure for that VCPU. This must be
repeated for every VCPU in the VM.

The address is given in terms of the physical address visible to
the guest and must be 64 byte aligned. The guest will discover the
address via a hypercall.

Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-10-21 19:20:29 +01:00
Steven Price
8538cb22bb KVM: Allow kvm_device_ops to be const
Currently a kvm_device_ops structure cannot be const without triggering
compiler warnings. However the structure doesn't need to be written to
and, by marking it const, it can be read-only in memory. Add some more
const keywords to allow this.

Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-10-21 19:20:28 +01:00
Steven Price
8564d6372a KVM: arm64: Support stolen time reporting via shared structure
Implement the service call for configuring a shared structure between a
VCPU and the hypervisor in which the hypervisor can write the time
stolen from the VCPU's execution time by other tasks on the host.

User space allocates memory which is placed at an IPA also chosen by user
space. The hypervisor then updates the shared structure using
kvm_put_guest() to ensure single copy atomicity of the 64-bit value
reporting the stolen time in nanoseconds.

Whenever stolen time is enabled by the guest, the stolen time counter is
reset.

The stolen time itself is retrieved from the sched_info structure
maintained by the Linux scheduler code. We enable SCHEDSTATS when
selecting KVM Kconfig to ensure this value is meaningful.

Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-10-21 19:20:28 +01:00
Steven Price
b48c1a45a1 KVM: arm64: Implement PV_TIME_FEATURES call
This provides a mechanism for querying which paravirtualized time
features are available in this hypervisor.

Also add the header file which defines the ABI for the paravirtualized
time features we're about to add.

Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-10-21 19:20:27 +01:00
Christoffer Dall
55009c6ed2 KVM: arm/arm64: Factor out hypercall handling from PSCI code
We currently intertwine the KVM PSCI implementation with the general
dispatch of hypercall handling, which makes perfect sense because PSCI
is the only category of hypercalls we support.

However, as we are about to support additional hypercalls, factor out
this functionality into a separate hypercall handler file.

Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
[steven.price@arm.com: rebased]
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-10-21 19:20:26 +01:00
Christoffer Dall
da345174ce KVM: arm/arm64: Allow user injection of external data aborts
In some scenarios, such as buggy guest or incorrect configuration of the
VMM and firmware description data, userspace will detect a memory access
to a portion of the IPA, which is not mapped to any MMIO region.

For this purpose, the appropriate action is to inject an external abort
to the guest.  The kernel already has functionality to inject an
external abort, but we need to wire up a signal from user space that
lets user space tell the kernel to do this.

It turns out, we already have the set event functionality which we can
perfectly reuse for this.

Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-10-21 18:59:51 +01:00
Christoffer Dall
c726200dd1 KVM: arm/arm64: Allow reporting non-ISV data aborts to userspace
For a long time, if a guest accessed memory outside of a memslot using
any of the load/store instructions in the architecture which doesn't
supply decoding information in the ESR_EL2 (the ISV bit is not set), the
kernel would print the following message and terminate the VM as a
result of returning -ENOSYS to userspace:

  load/store instruction decoding not implemented

The reason behind this message is that KVM assumes that all accesses
outside a memslot is an MMIO access which should be handled by
userspace, and we originally expected to eventually implement some sort
of decoding of load/store instructions where the ISV bit was not set.

However, it turns out that many of the instructions which don't provide
decoding information on abort are not safe to use for MMIO accesses, and
the remaining few that would potentially make sense to use on MMIO
accesses, such as those with register writeback, are not used in
practice.  It also turns out that fetching an instruction from guest
memory can be a pretty horrible affair, involving stopping all CPUs on
SMP systems, handling multiple corner cases of address translation in
software, and more.  It doesn't appear likely that we'll ever implement
this in the kernel.

What is much more common is that a user has misconfigured his/her guest
and is actually not accessing an MMIO region, but just hitting some
random hole in the IPA space.  In this scenario, the error message above
is almost misleading and has led to a great deal of confusion over the
years.

It is, nevertheless, ABI to userspace, and we therefore need to
introduce a new capability that userspace explicitly enables to change
behavior.

This patch introduces KVM_CAP_ARM_NISV_TO_USER (NISV meaning Non-ISV)
which does exactly that, and introduces a new exit reason to report the
event to userspace.  User space can then emulate an exception to the
guest, restart the guest, suspend the guest, or take any other
appropriate action as per the policy of the running system.

Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Reviewed-by: Alexander Graf <graf@amazon.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-10-21 18:59:44 +01:00
Marc Zyngier
8c3252c065 KVM: arm64: pmu: Reset sample period on overflow handling
The PMU emulation code uses the perf event sample period to trigger
the overflow detection. This works fine  for the *first* overflow
handling, but results in a huge number of interrupts on the host,
unrelated to the number of interrupts handled in the guest (a x20
factor is pretty common for the cycle counter). On a slow system
(such as a SW model), this can result in the guest only making
forward progress at a glacial pace.

It turns out that the clue is in the name. The sample period is
exactly that: a period. And once the an overflow has occured,
the following period should be the full width of the associated
counter, instead of whatever the guest had initially programed.

Reset the sample period to the architected value in the overflow
handler, which now results in a number of host interrupts that is
much closer to the number of interrupts in the guest.

Fixes: b02386eb7d ("arm64: KVM: Add PMU overflow interrupt routing")
Reviewed-by: Andrew Murray <andrew.murray@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-10-20 10:47:07 +01:00
Marc Zyngier
725ce66979 KVM: arm64: pmu: Set the CHAINED attribute before creating the in-kernel event
The current convention for KVM to request a chained event from the
host PMU is to set bit[0] in attr.config1 (PERF_ATTR_CFG1_KVM_PMU_CHAINED).

But as it turns out, this bit gets set *after* we create the kernel
event that backs our virtual counter, meaning that we never get
a 64bit counter.

Moving the setting to an earlier point solves the problem.

Fixes: 80f393a23b ("KVM: arm/arm64: Support chained PMU counters")
Reviewed-by: Andrew Murray <andrew.murray@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-10-20 10:47:07 +01:00
Marc Zyngier
f4e23cf947 KVM: arm64: pmu: Fix cycle counter truncation
When a counter is disabled, its value is sampled before the event
is being disabled, and the value written back in the shadow register.

In that process, the value gets truncated to 32bit, which is adequate
for any counter but the cycle counter (defined as a 64bit counter).

This obviously results in a corrupted counter, and things like
"perf record -e cycles" not working at all when run in a guest...
A similar, but less critical bug exists in kvm_pmu_get_counter_value.

Make the truncation conditional on the counter not being the cycle
counter, which results in a minor code reorganisation.

Fixes: 80f393a23b ("KVM: arm/arm64: Support chained PMU counters")
Reviewed-by: Andrew Murray <andrew.murray@arm.com>
Reported-by: Julien Thierry <julien.thierry.kdev@gmail.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-10-20 10:47:07 +01:00
Paolo Bonzini
d53a4c8e77 KVM/arm fixes for 5.4, take
- Remove the now obsolete hyp_alternate_select construct
 - Fix the TRACE_INCLUDE_PATH macro in the vgic code
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCgAtFiEEn9UcU+C1Yxj9lZw9I9DQutE9ekMFAl2TFyoPHG1hekBrZXJu
 ZWwub3JnAAoJECPQ0LrRPXpDROwP/inRUonz+KEG2B0Bx/NWtzdnDghxdcoNC9H6
 lVDHJ2dtC5Kmf0iHEualUvxXHYx7QJ3Maov3UAtkeYl3s4wC6TAl++QkqAG9PYsc
 lPQH4GBiQNewQyaebc/NKHDz3I3TClJDq57haHSFFiCwsUpJRgYL8WjktZD/Dide
 CUSQGxdnaALzHvMv5a8yQWadPL/RrXCZqOSKbUjjc20meZxrO66HwUd1G6uZZVDn
 VClMQwFkQzVjR7yX21/7gmTcwG99RqVaAsvOpCu9+MVlqSpDROspmSPMuG5X/usO
 zDgC07UFNPYHQKrGu8DHqlvO9DrK3vR8VEuKu+asVZP7D/ntvKhAM2c5ai188Z12
 w8rOnhJKnDtMGHXn4owcC9tgSfrPR+ZukaltzKRVVFm1Y1Io+qTkAuf3geFqZ1hj
 L9LWZ0KlMsFvfIKWPcAEp5rA9EeZoP5IeVCelBWj9ERDrcCMhma8RxpAlBPz1YPy
 J345jthE4xFZYQxV+amTKJ3CzbZPuU2iIKgDBYiG2PNCuKwCT46RQitOXWWTwSIb
 FZ6pcsmhofj69dSAlrRFjEpiLNkJuNX1ArsAA91vXemTXA2YfVLMZo1HkrmFNfbR
 j4HP1BhNVdCgk6HF2HzwdRt8eutvk889GG3q+uCoYCaSu3M8MUEgx64LurOPProO
 11jhNb3J
 =9luB
 -----END PGP SIGNATURE-----

Merge tag 'kvmarm-fixes-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm fixes for 5.4, take 

- Remove the now obsolete hyp_alternate_select construct
- Fix the TRACE_INCLUDE_PATH macro in the vgic code
2019-10-03 12:08:50 +02:00
Paolo Bonzini
833b45de69 kvm: x86, powerpc: do not allow clearing largepages debugfs entry
The largepages debugfs entry is incremented/decremented as shadow
pages are created or destroyed.  Clearing it will result in an
underflow, which is harmless to KVM but ugly (and could be
misinterpreted by tools that use debugfs information), so make
this particular statistic read-only.

Cc: kvm-ppc@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-30 18:52:00 +02:00
Linus Torvalds
fe38bd6862 * s390: ioctl hardening, selftests
* ARM: ITS translation cache; support for 512 vCPUs, various cleanups
 and bugfixes
 
 * PPC: various minor fixes and preparation
 
 * x86: bugfixes all over the place (posted interrupts, SVM, emulation
 corner cases, blocked INIT), some IPI optimizations
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQEcBAABAgAGBQJdf7fdAAoJEL/70l94x66DJzkIAKDcuWXJB4Qtoto6yUvPiHZm
 LYkY/Dn1zulb/DhzrBoXFey/jZXwl9kxMYkVTefnrAl0fRwFGX+G1UYnQrtAL6Gr
 ifdTYdy3kZhXCnnp99QAantWDswJHo1THwbmHrlmkxS4MdisEaTHwgjaHrDRZ4/d
 FAEwW2isSonP3YJfTtsKFFjL9k2D4iMnwZ/R2B7UOaWvgnerZ1GLmOkilvnzGGEV
 IQ89IIkWlkKd4SKgq8RkDKlfW5JrLrSdTK2Uf0DvAxV+J0EFkEaR+WlLsqumra0z
 Eg3KwNScfQj0DyT0TzurcOxObcQPoMNSFYXLRbUu1+i0CGgm90XpF1IosiuihgU=
 =w6I3
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull KVM updates from Paolo Bonzini:
 "s390:
   - ioctl hardening
   - selftests

  ARM:
   - ITS translation cache
   - support for 512 vCPUs
   - various cleanups and bugfixes

  PPC:
   - various minor fixes and preparation

  x86:
   - bugfixes all over the place (posted interrupts, SVM, emulation
     corner cases, blocked INIT)
   - some IPI optimizations"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (75 commits)
  KVM: X86: Use IPI shorthands in kvm guest when support
  KVM: x86: Fix INIT signal handling in various CPU states
  KVM: VMX: Introduce exit reason for receiving INIT signal on guest-mode
  KVM: VMX: Stop the preemption timer during vCPU reset
  KVM: LAPIC: Micro optimize IPI latency
  kvm: Nested KVM MMUs need PAE root too
  KVM: x86: set ctxt->have_exception in x86_decode_insn()
  KVM: x86: always stop emulation on page fault
  KVM: nVMX: trace nested VM-Enter failures detected by H/W
  KVM: nVMX: add tracepoint for failed nested VM-Enter
  x86: KVM: svm: Fix a check in nested_svm_vmrun()
  KVM: x86: Return to userspace with internal error on unexpected exit reason
  KVM: x86: Add kvm_emulate_{rd,wr}msr() to consolidate VXM/SVM code
  KVM: x86: Refactor up kvm_{g,s}et_msr() to simplify callers
  doc: kvm: Fix return description of KVM_SET_MSRS
  KVM: X86: Tune PLE Window tracepoint
  KVM: VMX: Change ple_window type to unsigned int
  KVM: X86: Remove tailing newline for tracepoints
  KVM: X86: Trace vcpu_id for vmexit
  KVM: x86: Manually calculate reserved bits when loading PDPTRS
  ...
2019-09-18 09:49:13 -07:00
Matt Delco
b60fe990c6 KVM: coalesced_mmio: add bounds checking
The first/last indexes are typically shared with a user app.
The app can change the 'last' index that the kernel uses
to store the next result.  This change sanity checks the index
before using it for writing to a potentially arbitrary address.

This fixes CVE-2019-14821.

Cc: stable@vger.kernel.org
Fixes: 5f94c1741b ("KVM: Add coalesced MMIO support (common part)")
Signed-off-by: Matt Delco <delco@chromium.org>
Signed-off-by: Jim Mattson <jmattson@google.com>
Reported-by: syzbot+983c866c3dd6efa3662a@syzkaller.appspotmail.com
[Use READ_ONCE. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-18 15:56:55 +02:00
Zenghui Yu
aac60f1a86 KVM: arm/arm64: vgic: Use the appropriate TRACE_INCLUDE_PATH
Commit 49dfe94fe5 ("KVM: arm/arm64: Fix TRACE_INCLUDE_PATH") fixes
TRACE_INCLUDE_PATH to the correct relative path to the define_trace.h
and explains why did the old one work.

The same fix should be applied to virt/kvm/arm/vgic/trace.h.

Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-09-11 16:36:19 +01:00
Marc Zyngier
92f35b751c KVM: arm/arm64: vgic: Allow more than 256 vcpus for KVM_IRQ_LINE
While parts of the VGIC support a large number of vcpus (we
bravely allow up to 512), other parts are more limited.

One of these limits is visible in the KVM_IRQ_LINE ioctl, which
only allows 256 vcpus to be signalled when using the CPU or PPI
types. Unfortunately, we've cornered ourselves badly by allocating
all the bits in the irq field.

Since the irq_type subfield (8 bit wide) is currently only taking
the values 0, 1 and 2 (and we have been careful not to allow anything
else), let's reduce this field to only 4 bits, and allocate the
remaining 4 bits to a vcpu2_index, which acts as a multiplier:

  vcpu_id = 256 * vcpu2_index + vcpu_index

With that, and a new capability (KVM_CAP_ARM_IRQ_LINE_LAYOUT_2)
allowing this to be discovered, it becomes possible to inject
PPIs to up to 4096 vcpus. But please just don't.

Whilst we're there, add a clarification about the use of KVM_IRQ_LINE
on arm, which is not completely conditionned by KVM_CAP_IRQCHIP.

Reported-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-09-09 12:29:09 +01:00
Linus Torvalds
9cf6b756cd arm64 fixes for -rc7
- Fix GICv2 emulation bug (KVM)
 
 - Fix deadlock in virtual GIC interrupt injection code (KVM)
 
 - Fix kprobes blacklist init failure due to broken kallsyms lookup
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAl1mW/0ACgkQt6xw3ITB
 YzQWEQgAnG+20c1uzPqIEME3o0bCXsci0I1w4yPYPH/NVrfmJdAjfway/cLZlMCh
 JYKBTc392kfYXgzAvMqvjNe+9O/qg9MnMxV7Afjfk9e0k+41Kcw/7U39/B6q4yOg
 zIz4YW6SdbbbUfY9VgR8SjsZ3HwJoP8YVNEv3W259funtFHkKDO35h1iG1f57GWL
 UELjEnag9dmCH35ykt7+SC4woBGjOQnic2XLSS7VZuU/26TfnUyo2HCdDcLcViCZ
 DHDQgaHAscb+tgJjeNtNEeRu+GPBG9LOhPw4EpBjGHeoJla7z74GOJPMEt4Ufoqd
 qG9TPfOFAFM30/PAdlWF3SjfzqK3PA==
 =WYzY
 -----END PGP SIGNATURE-----

Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 fixes from Will Deacon:
 "Hot on the heels of our last set of fixes are a few more for -rc7.

  Two of them are fixing issues with our virtual interrupt controller
  implementation in KVM/arm, while the other is a longstanding but
  straightforward kallsyms fix which was been acked by Masami and
  resolves an initialisation failure in kprobes observed on arm64.

   - Fix GICv2 emulation bug (KVM)

   - Fix deadlock in virtual GIC interrupt injection code (KVM)

   - Fix kprobes blacklist init failure due to broken kallsyms lookup"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  KVM: arm/arm64: vgic-v2: Handle SGI bits in GICD_I{S,C}PENDR0 as WI
  KVM: arm/arm64: vgic: Fix potential deadlock when ap_list is long
  kallsyms: Don't let kallsyms_lookup_size_offset() fail on retrieving the first symbol
2019-08-28 10:37:21 -07:00
Marc Zyngier
82e40f558d KVM: arm/arm64: vgic-v2: Handle SGI bits in GICD_I{S,C}PENDR0 as WI
A guest is not allowed to inject a SGI (or clear its pending state)
by writing to GICD_ISPENDR0 (resp. GICD_ICPENDR0), as these bits are
defined as WI (as per ARM IHI 0048B 4.3.7 and 4.3.8).

Make sure we correctly emulate the architecture.

Fixes: 96b298000d ("KVM: arm/arm64: vgic-new: Add PENDING registers handlers")
Cc: stable@vger.kernel.org # 4.7+
Reported-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
2019-08-28 11:21:42 +01:00
Heyi Guo
d4a8061a7c KVM: arm/arm64: vgic: Fix potential deadlock when ap_list is long
If the ap_list is longer than 256 entries, merge_final() in list_sort()
will call the comparison callback with the same element twice, causing
a deadlock in vgic_irq_cmp().

Fix it by returning early when irqa == irqb.

Cc: stable@vger.kernel.org # 4.7+
Fixes: 8e44474579 ("KVM: arm/arm64: vgic-new: Add IRQ sorting")
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Heyi Guo <guoheyi@huawei.com>
[maz: massaged commit log and patch, added Fixes and Cc-stable]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
2019-08-27 16:19:56 +01:00
Eric Auger
3109741a8d KVM: arm/arm64: vgic: Use a single IO device per redistributor
At the moment we use 2 IO devices per GICv3 redistributor: one
one for the RD_base frame and one for the SGI_base frame.

Instead we can use a single IO device per redistributor (the 2
frames are contiguous). This saves slots on the KVM_MMIO_BUS
which is currently limited to NR_IOBUS_DEVS (1000).

This change allows to instantiate up to 512 redistributors and may
speed the guest boot with a large number of VCPUs.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-08-25 11:02:52 +01:00
Marc Zyngier
926c61568d KVM: arm/arm64: vgic: Remove spurious semicolons
Detected by Coccinelle (and Will Deacon) using
scripts/coccinelle/misc/semicolon.cocci.

Reported-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-08-25 11:02:13 +01:00
Will Deacon
087eeea9ad KVM/arm fixes for 5.3, take
- Don't overskip instructions on MMIO emulation
 - Fix UBSAN splat when initializing PPI priorities
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCgAtFiEEn9UcU+C1Yxj9lZw9I9DQutE9ekMFAl1gE4sPHG1hekBrZXJu
 ZWwub3JnAAoJECPQ0LrRPXpDvT0QALDyWgNXugpyOTbuH01zgTT5W2PxWPnLT6bl
 yCN84C2falMjLgsvBGJo+HuD8nOTwCsam+6mVnbVOmXjDpFtsp1z/unJ9Cv9T4e+
 1/TSDgp1Y1wJsdfVMqLOj2LOJterVC65e+eRp4ShEaCaGl0QsJLQIZNndoycen8K
 XcwLokABKoypctGz/1XJD9fX0GeJdgJQ2dASVuccaWxvo0lrD5qoRlZUIdWKjTmn
 OneayyIB8Dqn2Ju/bQ9bbTzg5VLfw2L9lnrVAlaFnWZETWHAtG6uCK6Zj/eDNZj8
 TFBwXtKLbdJPQO+JR7l40QjvK/qkHdVaOp4M1kB+4niYogK23WlWvh7kZ/sZbAUb
 A1PRQ39L6f0LJrJJtWeS/bJyUmBnX4PJkwZMNV4EN4fXDi2+79/DxUKXih+im/WN
 W26WMAqFwxKiMSEENLfl4ladmrgo9SUBeI8QAnEgvUChCcy9HGpKgQp/KjImM9b3
 ab87VS8BUYfyThF7PPshfBteWg3rHPQY2kjRn7B8yRhCcoWBErGtXkEdIhxvtfjk
 hUgvT8CPk4uoh4DynqRxvDR16xMPwpUTtedVoZzIkGgG6ZLHAdX0303OLaRZ/KDl
 j6vKdm8rU5I4samalckcHuoP+t2Hmmdbd0JNo+BaiorbtBXXXJQWd++85tCMniTg
 kWGoHUn5
 =FGm5
 -----END PGP SIGNATURE-----

Merge tag 'kvmarm-fixes-for-5.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm/fixes

Pull KVM/arm fixes from Marc Zyngier as per Paulo's request at:

  https://lkml.kernel.org/r/21ae69a2-2546-29d0-bff6-2ea825e3d968@redhat.com

  "One (hopefully last) set of fixes for KVM/arm for 5.3: an embarassing
   MMIO emulation regression, and a UBSAN splat. Oh well...

   - Don't overskip instructions on MMIO emulation

   - Fix UBSAN splat when initializing PPI priorities"

* tag 'kvmarm-fixes-for-5.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm:
  KVM: arm/arm64: VGIC: Properly initialise private IRQ affinity
  KVM: arm/arm64: Only skip MMIO insn once
2019-08-24 12:46:30 +01:00
Andre Przywara
2e16f3e926 KVM: arm/arm64: VGIC: Properly initialise private IRQ affinity
At the moment we initialise the target *mask* of a virtual IRQ to the
VCPU it belongs to, even though this mask is only defined for GICv2 and
quickly runs out of bits for many GICv3 guests.
This behaviour triggers an UBSAN complaint for more than 32 VCPUs:
------
[ 5659.462377] UBSAN: Undefined behaviour in virt/kvm/arm/vgic/vgic-init.c:223:21
[ 5659.471689] shift exponent 32 is too large for 32-bit type 'unsigned int'
------
Also for GICv3 guests the reporting of TARGET in the "vgic-state" debugfs
dump is wrong, due to this very same problem.

Because there is no requirement to create the VGIC device before the
VCPUs (and QEMU actually does it the other way round), we can't safely
initialise mpidr or targets in kvm_vgic_vcpu_init(). But since we touch
every private IRQ for each VCPU anyway later (in vgic_init()), we can
just move the initialisation of those fields into there, where we
definitely know the VGIC type.

On the way make sure we really have either a VGICv2 or a VGICv3 device,
since the existing code is just checking for "VGICv3 or not", silently
ignoring the uninitialised case.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reported-by: Dave Martin <dave.martin@arm.com>
Tested-by: Julien Grall <julien.grall@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-08-23 17:23:01 +01:00
Andrew Jones
2113c5f62b KVM: arm/arm64: Only skip MMIO insn once
If after an MMIO exit to userspace a VCPU is immediately run with an
immediate_exit request, such as when a signal is delivered or an MMIO
emulation completion is needed, then the VCPU completes the MMIO
emulation and immediately returns to userspace. As the exit_reason
does not get changed from KVM_EXIT_MMIO in these cases we have to
be careful not to complete the MMIO emulation again, when the VCPU is
eventually run again, because the emulation does an instruction skip
(and doing too many skips would be a waste of guest code :-) We need
to use additional VCPU state to track if the emulation is complete.
As luck would have it, we already have 'mmio_needed', which even
appears to be used in this way by other architectures already.

Fixes: 0d640732db ("arm64: KVM: Skip MMIO insn after emulation")
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-08-22 13:19:56 +01:00
Marc Zyngier
07ab0f8d9a KVM: Call kvm_arch_vcpu_blocking early into the blocking sequence
When a vpcu is about to block by calling kvm_vcpu_block, we call
back into the arch code to allow any form of synchronization that
may be required at this point (SVN stops the AVIC, ARM synchronises
the VMCR and enables GICv4 doorbells). But this synchronization
comes in quite late, as we've potentially waited for halt_poll_ns
to expire.

Instead, let's move kvm_arch_vcpu_blocking() to the beginning of
kvm_vcpu_block(), which on ARM has several benefits:

- VMCR gets synchronised early, meaning that any interrupt delivered
  during the polling window will be evaluated with the correct guest
  PMR
- GICv4 doorbells are enabled, which means that any guest interrupt
  directly injected during that window will be immediately recognised

Tang Nianyao ran some tests on a GICv4 machine to evaluate such
change, and reported up to a 10% improvement for netperf:

<quote>
	netperf result:
	D06 as server, intel 8180 server as client
	with change:
	package 512 bytes - 5500 Mbits/s
	package 64 bytes - 760 Mbits/s
	without change:
	package 512 bytes - 5000 Mbits/s
	package 64 bytes - 710 Mbits/s
</quote>

Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-08-18 18:50:44 +01:00
Alexandru Elisei
0ed5f5d639 KVM: arm/arm64: vgic: Make function comments match function declarations
Since commit 503a62862e ("KVM: arm/arm64: vgic: Rely on the GIC driver to
parse the firmware tables"), the vgic_v{2,3}_probe functions stopped using
a DT node. Commit 9097773245 ("KVM: arm/arm64: vgic-new: vgic_init:
implement kvm_vgic_hyp_init") changed the functions again, and now they
require exactly one argument, a struct gic_kvm_info populated by the GIC
driver. Unfortunately the comments regressed and state that a DT node is
used instead. Change the function comments to reflect the current
prototypes.

Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-08-18 18:44:04 +01:00
Marc Zyngier
41108170d9 KVM: arm/arm64: vgic-irqfd: Implement kvm_arch_set_irq_inatomic
Now that we have a cache of MSI->LPI translations, it is pretty
easy to implement kvm_arch_set_irq_inatomic (this cache can be
parsed without sleeping).

Hopefully, this will improve some LPI-heavy workloads.

Tested-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-08-18 18:38:54 +01:00
Marc Zyngier
86a7dae884 KVM: arm/arm64: vgic-its: Check the LPI translation cache on MSI injection
When performing an MSI injection, let's first check if the translation
is already in the cache. If so, let's inject it quickly without
going through the whole translation process.

Tested-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-08-18 18:38:53 +01:00
Marc Zyngier
89489ee9ce KVM: arm/arm64: vgic-its: Cache successful MSI->LPI translation
On a successful translation, preserve the parameters in the LPI
translation cache. Each translation is reusing the last slot
in the list, naturally evicting the least recently used entry.

Tested-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-08-18 18:38:52 +01:00