The current reference management logic of io scheduler modules contains
refcnt problems. For example, blk_mq_init_sched may fail before or after
the calling of e->ops.init_sched. If it fails before the calling, it does
nothing to the reference to the io scheduler module. But if it fails after
the calling, it releases the reference by calling kobject_put(&eq->kobj).
As the callers of blk_mq_init_sched can't know exactly where the failure
happens, they can't handle the reference to the io scheduler module
properly: releasing the reference on failure results in double-release if
blk_mq_init_sched has released it, and not releasing the reference results
in ghost reference if blk_mq_init_sched did not release it either.
The same problem also exists in io schedulers' init_sched implementations.
We can address the problem by adding releasing statements to the error
handling procedures of blk_mq_init_sched and init_sched implementations.
But that is counterintuitive and requires modifications to existing io
schedulers.
Instead, We make elevator_alloc get the io scheduler module references
that will be released by elevator_release. And then, we match each
elevator_get with an elevator_put. Therefore, each reference to an io
scheduler module explicitly has its own getter and releaser, and we no
longer need to worry about the refcnt problems.
The bugs and the patch can be validated with tools here:
https://github.com/nickyc975/linux_elv_refcnt_bug.git
[hch: split out a few bits into separate patches, use a non-try
module_get in elevator_alloc]
Signed-off-by: Jinlong Chen <nickyc975@zju.edu.cn>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221020064819.1469928-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
No need to find the actual elevator_type struct for this comparism,
the name is all that is needed.
Signed-off-by: Jinlong Chen <nickyc975@zju.edu.cn>
[hch: split from a larger patch]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221020064819.1469928-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The stripped name should also be used for the none check. To do so
strip it in the caller and pass in the sanitized name. Drop the pointless
__ prefix in the function name while we're at it.
Based on a patch from Jinlong Chen <nickyc975@zju.edu.cn>.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221020064819.1469928-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Make sure we have helpers for all relevant module refcount operations on
the elevator_type in elevator.h, and use them. Move the call to the get
helper in blk_mq_elv_switch_none a bit so that it is obvious with a less
verbose comment.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221020064819.1469928-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit b5dc5d4d1f ("block,bfq: Disable writeback throttling") tries to
disable wbt for bfq, it's done by calling wbt_disable_default() in
bfq_init_queue(). However, wbt is still enabled if default elevator is
bfq:
device_add_disk
elevator_init_mq
bfq_init_queue
wbt_disable_default -> done nothing
blk_register_queue
wbt_enable_default -> wbt is enabled
Fix the problem by adding a new flag ELEVATOR_FLAG_DISBALE_WBT, bfq
will set the flag in bfq_init_queue, and following wbt_enable_default()
won't enable wbt while the flag is set.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221019121518.3865235-7-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There are only one flag to indicate that elevator is registered currently,
prepare to add a flag to disable wbt if default elevator is bfq.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221019121518.3865235-6-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently, if wbt is initialized and then disabled by
wbt_disable_default(), sysfs will still show valid wbt_lat_usec, which
will confuse users that wbt is still enabled.
This patch shows wbt_lat_usec as zero if it's disabled.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reported-and-tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221019121518.3865235-5-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently, if user disable wbt through sysfs, 'enable_state' will be
'WBT_STATE_ON_MANUAL', which will be confusing. Add a new state
'WBT_STATE_OFF_MANUAL' to cover that case.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221019121518.3865235-4-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
"elevator_queue *e" is already declared and initialized in the beginning
of elv_unregister_queue().
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20221019121518.3865235-2-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
'ioc->params' is updated in ioc_refresh_params(), which is proteced by
'ioc->lock', however, ioc_timer_fn() read params outside the lock.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20221012094035.390056-5-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This won't cause any severe problem currently, however, this doesn't
seems appropriate:
1) 'ioc->params' is read from multiple places without holding
'ioc->lock', unexpected value might be read if writing it concurrently.
2) If configuration is changed while io is throttling, the functionality
might be affected. For example, if module params is updated and cost
becomes smaller, waiting for timer that is caculated under old
configuration is not appropriate.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20221012094035.390056-4-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
ioc_qos_write() and ioc_cost_model_write() are the same:
1) hold lock to read 'ioc->params' to local variable;
2) update params to local variable without lock;
3) hold lock to write local variable to 'ioc->params';
In theroy, if user updates params concurrenty, the params might be lost:
t1: update params a t2: update params b
spin_lock_irq(&ioc->lock);
memcpy(qos, ioc->params.qos, sizeof(qos))
spin_unlock_irq(&ioc->lock);
qos[a] = xxx;
spin_lock_irq(&ioc->lock);
memcpy(qos, ioc->params.qos, sizeof(qos))
spin_unlock_irq(&ioc->lock);
qos[b] = xxx;
spin_lock_irq(&ioc->lock);
memcpy(ioc->params.qos, qos, sizeof(qos));
ioc_refresh_params(ioc, true);
spin_unlock_irq(&ioc->lock);
spin_lock_irq(&ioc->lock);
// updates of a will be lost
memcpy(ioc->params.qos, qos, sizeof(qos));
ioc_refresh_params(ioc, true);
spin_unlock_irq(&ioc->lock);
Althrough this is not common case, the problem can by fixed easily by
holding the lock through the read, update, write process.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20221012094035.390056-3-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit b5dc5d4d1f ("block,bfq: Disable writeback throttling") disable
wbt for bfq, because different write-throttling heuristics should not
work together.
For the same reason, wbt and iocost should not work together as well,
unless admin really want to do that, dispite that performance is
affected.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20221012094035.390056-2-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
bio_put() with REQ_ALLOC_CACHE assumes that it's executed not from
an irq context. Let's add a warning if the invariant is not respected,
especially since there is a couple of places removing REQ_POLLED by hand
without also clearing REQ_ALLOC_CACHE.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/558d78313476c4e9c233902efa0092644c3d420a.1666122465.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Our syzkaller report a null pointer dereference, root cause is
following:
__blk_mq_alloc_map_and_rqs
set->tags[hctx_idx] = blk_mq_alloc_map_and_rqs
blk_mq_alloc_map_and_rqs
blk_mq_alloc_rqs
// failed due to oom
alloc_pages_node
// set->tags[hctx_idx] is still NULL
blk_mq_free_rqs
drv_tags = set->tags[hctx_idx];
// null pointer dereference is triggered
blk_mq_clear_rq_mapping(drv_tags, ...)
This is because commit 63064be150 ("blk-mq:
Add blk_mq_alloc_map_and_rqs()") merged the two steps:
1) set->tags[hctx_idx] = blk_mq_alloc_rq_map()
2) blk_mq_alloc_rqs(..., set->tags[hctx_idx])
into one step:
set->tags[hctx_idx] = blk_mq_alloc_map_and_rqs()
Since tags is not initialized yet in this case, fix the problem by
checking if tags is NULL pointer in blk_mq_clear_rq_mapping().
Fixes: 63064be150 ("blk-mq: Add blk_mq_alloc_map_and_rqs()")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/20221011142253.4015966-1-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=M+mV
-----END PGP SIGNATURE-----
Merge tag 'random-6.1-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull more random number generator updates from Jason Donenfeld:
"This time with some large scale treewide cleanups.
The intent of this pull is to clean up the way callers fetch random
integers. The current rules for doing this right are:
- If you want a secure or an insecure random u64, use get_random_u64()
- If you want a secure or an insecure random u32, use get_random_u32()
The old function prandom_u32() has been deprecated for a while
now and is just a wrapper around get_random_u32(). Same for
get_random_int().
- If you want a secure or an insecure random u16, use get_random_u16()
- If you want a secure or an insecure random u8, use get_random_u8()
- If you want secure or insecure random bytes, use get_random_bytes().
The old function prandom_bytes() has been deprecated for a while
now and has long been a wrapper around get_random_bytes()
- If you want a non-uniform random u32, u16, or u8 bounded by a
certain open interval maximum, use prandom_u32_max()
I say "non-uniform", because it doesn't do any rejection sampling
or divisions. Hence, it stays within the prandom_*() namespace, not
the get_random_*() namespace.
I'm currently investigating a "uniform" function for 6.2. We'll see
what comes of that.
By applying these rules uniformly, we get several benefits:
- By using prandom_u32_max() with an upper-bound that the compiler
can prove at compile-time is ≤65536 or ≤256, internally
get_random_u16() or get_random_u8() is used, which wastes fewer
batched random bytes, and hence has higher throughput.
- By using prandom_u32_max() instead of %, when the upper-bound is
not a constant, division is still avoided, because
prandom_u32_max() uses a faster multiplication-based trick instead.
- By using get_random_u16() or get_random_u8() in cases where the
return value is intended to indeed be a u16 or a u8, we waste fewer
batched random bytes, and hence have higher throughput.
This series was originally done by hand while I was on an airplane
without Internet. Later, Kees and I worked on retroactively figuring
out what could be done with Coccinelle and what had to be done
manually, and then we split things up based on that.
So while this touches a lot of files, the actual amount of code that's
hand fiddled is comfortably small"
* tag 'random-6.1-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
prandom: remove unused functions
treewide: use get_random_bytes() when possible
treewide: use get_random_u32() when possible
treewide: use get_random_{u8,u16}() when possible, part 2
treewide: use get_random_{u8,u16}() when possible, part 1
treewide: use prandom_u32_max() when possible, part 2
treewide: use prandom_u32_max() when possible, part 1
-----BEGIN PGP SIGNATURE-----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=kxra
-----END PGP SIGNATURE-----
Merge tag 'block-6.1-2022-10-13' of git://git.kernel.dk/linux
Pull more block updates from Jens Axboe:
"Fixes that ended up landing later than the initial block pull request.
Nothing really major in here:
- NVMe pull request via Christoph:
- add NVME_QUIRK_BOGUS_NID for Lexar NM760 (Abhijit)
- add NVME_QUIRK_NO_DEEPEST_PS to avoid the deepest sleep state
on ZHITAI TiPro5000 SSDs (Xi Ruoyao)
- fix possible hang caused during ctrl deletion (Sagi Grimberg)
- fix possible hang in live ns resize with ANA access (Sagi
Grimberg)
- Proactively avoid a sign extension issue with the queue flags
(Brian)
- Regression fix for hidden disks (Christoph)
- Update OPAL maintainers entry (Jonathan)
- blk-wbt regression initialization fix (Yu)"
* tag 'block-6.1-2022-10-13' of git://git.kernel.dk/linux:
nvme-multipath: fix possible hang in live ns resize with ANA access
nvme-pci: avoid the deepest sleep state on ZHITAI TiPro5000 SSDs
nvme-pci: add NVME_QUIRK_BOGUS_NID for Lexar NM760
nvme-tcp: fix possible hang caused during ctrl deletion
nvme-rdma: fix possible hang caused during ctrl deletion
block: fix leaking minors of hidden disks
block: avoid sign extend problem with default queue flags mask
blk-wbt: fix that 'rwb->wc' is always set to 1 in wbt_init()
block: Remove the repeat word 'can'
MAINTAINERS: Update SED-Opal Maintainers
The prandom_bytes() function has been a deprecated inline wrapper around
get_random_bytes() for several releases now, and compiles down to the
exact same code. Replace the deprecated wrapper with a direct call to
the real function. This was done as a basic find and replace.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Yury Norov <yury.norov@gmail.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> # powerpc
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
linux-next for a couple of months without, to my knowledge, any negative
reports (or any positive ones, come to that).
- Also the Maple Tree from Liam R. Howlett. An overlapping range-based
tree for vmas. It it apparently slight more efficient in its own right,
but is mainly targeted at enabling work to reduce mmap_lock contention.
Liam has identified a number of other tree users in the kernel which
could be beneficially onverted to mapletrees.
Yu Zhao has identified a hard-to-hit but "easy to fix" lockdep splat
(https://lkml.kernel.org/r/CAOUHufZabH85CeUN-MEMgL8gJGzJEWUrkiM58JkTbBhh-jew0Q@mail.gmail.com).
This has yet to be addressed due to Liam's unfortunately timed
vacation. He is now back and we'll get this fixed up.
- Dmitry Vyukov introduces KMSAN: the Kernel Memory Sanitizer. It uses
clang-generated instrumentation to detect used-unintialized bugs down to
the single bit level.
KMSAN keeps finding bugs. New ones, as well as the legacy ones.
- Yang Shi adds a userspace mechanism (madvise) to induce a collapse of
memory into THPs.
- Zach O'Keefe has expanded Yang Shi's madvise(MADV_COLLAPSE) to support
file/shmem-backed pages.
- userfaultfd updates from Axel Rasmussen
- zsmalloc cleanups from Alexey Romanov
- cleanups from Miaohe Lin: vmscan, hugetlb_cgroup, hugetlb and memory-failure
- Huang Ying adds enhancements to NUMA balancing memory tiering mode's
page promotion, with a new way of detecting hot pages.
- memcg updates from Shakeel Butt: charging optimizations and reduced
memory consumption.
- memcg cleanups from Kairui Song.
- memcg fixes and cleanups from Johannes Weiner.
- Vishal Moola provides more folio conversions
- Zhang Yi removed ll_rw_block() :(
- migration enhancements from Peter Xu
- migration error-path bugfixes from Huang Ying
- Aneesh Kumar added ability for a device driver to alter the memory
tiering promotion paths. For optimizations by PMEM drivers, DRM
drivers, etc.
- vma merging improvements from Jakub Matěn.
- NUMA hinting cleanups from David Hildenbrand.
- xu xin added aditional userspace visibility into KSM merging activity.
- THP & KSM code consolidation from Qi Zheng.
- more folio work from Matthew Wilcox.
- KASAN updates from Andrey Konovalov.
- DAMON cleanups from Kaixu Xia.
- DAMON work from SeongJae Park: fixes, cleanups.
- hugetlb sysfs cleanups from Muchun Song.
- Mike Kravetz fixes locking issues in hugetlbfs and in hugetlb core.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY0HaPgAKCRDdBJ7gKXxA
joPjAQDZ5LlRCMWZ1oxLP2NOTp6nm63q9PWcGnmY50FjD/dNlwEAnx7OejCLWGWf
bbTuk6U2+TKgJa4X7+pbbejeoqnt5QU=
=xfWx
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2022-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Yu Zhao's Multi-Gen LRU patches are here. They've been under test in
linux-next for a couple of months without, to my knowledge, any
negative reports (or any positive ones, come to that).
- Also the Maple Tree from Liam Howlett. An overlapping range-based
tree for vmas. It it apparently slightly more efficient in its own
right, but is mainly targeted at enabling work to reduce mmap_lock
contention.
Liam has identified a number of other tree users in the kernel which
could be beneficially onverted to mapletrees.
Yu Zhao has identified a hard-to-hit but "easy to fix" lockdep splat
at [1]. This has yet to be addressed due to Liam's unfortunately
timed vacation. He is now back and we'll get this fixed up.
- Dmitry Vyukov introduces KMSAN: the Kernel Memory Sanitizer. It uses
clang-generated instrumentation to detect used-unintialized bugs down
to the single bit level.
KMSAN keeps finding bugs. New ones, as well as the legacy ones.
- Yang Shi adds a userspace mechanism (madvise) to induce a collapse of
memory into THPs.
- Zach O'Keefe has expanded Yang Shi's madvise(MADV_COLLAPSE) to
support file/shmem-backed pages.
- userfaultfd updates from Axel Rasmussen
- zsmalloc cleanups from Alexey Romanov
- cleanups from Miaohe Lin: vmscan, hugetlb_cgroup, hugetlb and
memory-failure
- Huang Ying adds enhancements to NUMA balancing memory tiering mode's
page promotion, with a new way of detecting hot pages.
- memcg updates from Shakeel Butt: charging optimizations and reduced
memory consumption.
- memcg cleanups from Kairui Song.
- memcg fixes and cleanups from Johannes Weiner.
- Vishal Moola provides more folio conversions
- Zhang Yi removed ll_rw_block() :(
- migration enhancements from Peter Xu
- migration error-path bugfixes from Huang Ying
- Aneesh Kumar added ability for a device driver to alter the memory
tiering promotion paths. For optimizations by PMEM drivers, DRM
drivers, etc.
- vma merging improvements from Jakub Matěn.
- NUMA hinting cleanups from David Hildenbrand.
- xu xin added aditional userspace visibility into KSM merging
activity.
- THP & KSM code consolidation from Qi Zheng.
- more folio work from Matthew Wilcox.
- KASAN updates from Andrey Konovalov.
- DAMON cleanups from Kaixu Xia.
- DAMON work from SeongJae Park: fixes, cleanups.
- hugetlb sysfs cleanups from Muchun Song.
- Mike Kravetz fixes locking issues in hugetlbfs and in hugetlb core.
Link: https://lkml.kernel.org/r/CAOUHufZabH85CeUN-MEMgL8gJGzJEWUrkiM58JkTbBhh-jew0Q@mail.gmail.com [1]
* tag 'mm-stable-2022-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (555 commits)
hugetlb: allocate vma lock for all sharable vmas
hugetlb: take hugetlb vma_lock when clearing vma_lock->vma pointer
hugetlb: fix vma lock handling during split vma and range unmapping
mglru: mm/vmscan.c: fix imprecise comments
mm/mglru: don't sync disk for each aging cycle
mm: memcontrol: drop dead CONFIG_MEMCG_SWAP config symbol
mm: memcontrol: use do_memsw_account() in a few more places
mm: memcontrol: deprecate swapaccounting=0 mode
mm: memcontrol: don't allocate cgroup swap arrays when memcg is disabled
mm/secretmem: remove reduntant return value
mm/hugetlb: add available_huge_pages() func
mm: remove unused inline functions from include/linux/mm_inline.h
selftests/vm: add selftest for MADV_COLLAPSE of uffd-minor memory
selftests/vm: add file/shmem MADV_COLLAPSE selftest for cleared pmd
selftests/vm: add thp collapse shmem testing
selftests/vm: add thp collapse file and tmpfs testing
selftests/vm: modularize thp collapse memory operations
selftests/vm: dedup THP helpers
mm/khugepaged: add tracepoint to hpage_collapse_scan_file()
mm/madvise: add file and shmem support to MADV_COLLAPSE
...
* cpuset now support isolated cpus.partition type, which will enable dynamic
CPU isolation.
* pids.peak added to remember the max number of pids used.
* Holes in cgroup namespace plugged.
* Internal cleanups.
Note that for-6.1-fixes was pulled into for-6.1 twice. Both were for
follow-up cleanups and each merge commit has details.
Also, 8a693f7766 ("cgroup: Remove CFTYPE_PRESSURE") removes the flag used
by PSI changes in the tip tree and the merged result won't compile due to
the missing flag. Simply removing the struct init lines specifying the flag
is the correct resolution. linux-next already contains the correct fix:
https://lkml.kernel.org/r/20220912161812.072aaa3b@canb.auug.org.au
-----BEGIN PGP SIGNATURE-----
iIQEABYIACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCYzsl7w4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGYsxAP4kad4YPw+CueLyyEMiYgBHouqDt8cG0+FJWK3X
svTC7wD/eCLfxZM8TjjSrMmvaMrml586mr3NoQaFeW0x3twptQQ=
=LERu
-----END PGP SIGNATURE-----
Merge tag 'cgroup-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
- cpuset now support isolated cpus.partition type, which will enable
dynamic CPU isolation
- pids.peak added to remember the max number of pids used
- holes in cgroup namespace plugged
- internal cleanups
* tag 'cgroup-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (25 commits)
cgroup: use strscpy() is more robust and safer
iocost_monitor: reorder BlkgIterator
cgroup: simplify code in cgroup_apply_control
cgroup: Make cgroup_get_from_id() prettier
cgroup/cpuset: remove unreachable code
cgroup: Remove CFTYPE_PRESSURE
cgroup: Improve cftype add/rm error handling
kselftest/cgroup: Add cpuset v2 partition root state test
cgroup/cpuset: Update description of cpuset.cpus.partition in cgroup-v2.rst
cgroup/cpuset: Make partition invalid if cpumask change violates exclusivity rule
cgroup/cpuset: Relocate a code block in validate_change()
cgroup/cpuset: Show invalid partition reason string
cgroup/cpuset: Add a new isolated cpus.partition type
cgroup/cpuset: Relax constraints to partition & cpus changes
cgroup/cpuset: Allow no-task partition to have empty cpuset.cpus.effective
cgroup/cpuset: Miscellaneous cleanups & add helper functions
cgroup/cpuset: Enable update_tasks_cpumask() on top_cpuset
cgroup: add pids.peak interface for pids controller
cgroup: Remove data-race around cgrp_dfl_visible
cgroup: Fix build failure when CONFIG_SHRINKER_DEBUG
...
Merge in later fixes.
* for-6.1/block:
block: fix leaking minors of hidden disks
block: avoid sign extend problem with default queue flags mask
blk-wbt: fix that 'rwb->wc' is always set to 1 in wbt_init()
block: Remove the repeat word 'can'
MAINTAINERS: Update SED-Opal Maintainers
The major/minor of a hidden gendisk is not propagated to the block
device because it is never registered using bdev_add. But the lack of
bd_dev also causes the dynamic major minor number not to be freed.
Assign bd_dev manually to ensure the dynamic major minor gets freed.
Based on a patch by Keith Busch.
Fixes: 8ddcd65325 ("block: introduce GENHD_FL_HIDDEN")
Reported-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20221010131857.748129-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
commit 8c5035dfbb ("blk-wbt: call rq_qos_add() after wb_normal is
initialized") moves wbt_set_write_cache() before rq_qos_add(), which
is wrong because wbt_rq_qos() is still NULL.
Fix the problem by removing wbt_set_write_cache() and setting 'rwb->wc'
directly. Noted that this patch also remove the redundant setting of
'rab->wc'.
Fixes: 8c5035dfbb ("blk-wbt: call rq_qos_add() after wb_normal is initialized")
Reported-by: kernel test robot <yujie.liu@intel.com>
Link: https://lore.kernel.org/r/202210081045.77ddf59b-yujie.liu@intel.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20221009101038.1692875-1-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=nwLk
-----END PGP SIGNATURE-----
Merge tag 'for-6.1/passthrough-2022-10-04' of git://git.kernel.dk/linux
Pull passthrough updates from Jens Axboe:
"With these changes, passthrough NVMe support over io_uring now
performs at the same level as block device O_DIRECT, and in many cases
6-8% better.
This contains:
- Add support for fixed buffers for passthrough (Anuj, Kanchan)
- Enable batched allocations and freeing on passthrough, similarly to
what we support on the normal storage path (me)
- Fix from Geert fixing an issue with !CONFIG_IO_URING"
* tag 'for-6.1/passthrough-2022-10-04' of git://git.kernel.dk/linux:
io_uring: Add missing inline to io_uring_cmd_import_fixed() dummy
nvme: wire up fixed buffer support for nvme passthrough
nvme: pass ubuffer as an integer
block: extend functionality to map bvec iterator
block: factor out blk_rq_map_bio_alloc helper
block: rename bio_map_put to blk_mq_map_bio_put
nvme: refactor nvme_alloc_request
nvme: refactor nvme_add_user_metadata
nvme: Use blk_rq_map_user_io helper
scsi: Use blk_rq_map_user_io helper
block: add blk_rq_map_user_io
io_uring: introduce fixed buffer support for io_uring_cmd
io_uring: add io_uring_cmd_import_fixed
nvme: enable batched completions of passthrough IO
nvme: split out metadata vs non metadata end_io uring_cmd completions
block: allow end_io based requests in the completion batch handling
block: change request end_io handler to pass back a return value
block: enable batched allocation for blk_mq_alloc_request()
block: kill deprecated BUG_ON() in the flush handling
-----BEGIN PGP SIGNATURE-----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=R05e
-----END PGP SIGNATURE-----
Merge tag 'for-6.1/block-2022-10-03' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- NVMe pull requests via Christoph:
- handle number of queue changes in the TCP and RDMA drivers
(Daniel Wagner)
- allow changing the number of queues in nvmet (Daniel Wagner)
- also consider host_iface when checking ip options (Daniel
Wagner)
- don't map pages which can't come from HIGHMEM (Fabio M. De
Francesco)
- avoid unnecessary flush bios in nvmet (Guixin Liu)
- shrink and better pack the nvme_iod structure (Keith Busch)
- add comment for unaligned "fake" nqn (Linjun Bao)
- print actual source IP address through sysfs "address" attr
(Martin Belanger)
- various cleanups (Jackie Liu, Wolfram Sang, Genjian Zhang)
- handle effects after freeing the request (Keith Busch)
- copy firmware_rev on each init (Keith Busch)
- restrict management ioctls to admin (Keith Busch)
- ensure subsystem reset is single threaded (Keith Busch)
- report the actual number of tagset maps in nvme-pci (Keith
Busch)
- small fabrics authentication fixups (Christoph Hellwig)
- add common code for tagset allocation and freeing (Christoph
Hellwig)
- stop using the request_queue in nvmet (Christoph Hellwig)
- set min_align_mask before calculating max_hw_sectors (Rishabh
Bhatnagar)
- send a rediscover uevent when a persistent discovery controller
reconnects (Sagi Grimberg)
- misc nvmet-tcp fixes (Varun Prakash, zhenwei pi)
- MD pull request via Song:
- Various raid5 fix and clean up, by Logan Gunthorpe and David
Sloan.
- Raid10 performance optimization, by Yu Kuai.
- sbitmap wakeup hang fixes (Hugh, Keith, Jan, Yu)
- IO scheduler switching quisce fix (Keith)
- s390/dasd block driver updates (Stefan)
- support for recovery for the ublk driver (ZiyangZhang)
- rnbd drivers fixes and updates (Guoqing, Santosh, ye, Christoph)
- blk-mq and null_blk map fixes (Bart)
- various bcache fixes (Coly, Jilin, Jules)
- nbd signal hang fix (Shigeru)
- block writeback throttling fix (Yu)
- optimize the passthrough mapping handling (me)
- prepare block cgroups to being gendisk based (Christoph)
- get rid of an old PSI hack in the block layer, moving it to the
callers instead where it belongs (Christoph)
- blk-throttle fixes and cleanups (Yu)
- misc fixes and cleanups (Liu Shixin, Liu Song, Miaohe, Pankaj,
Ping-Xiang, Wolfram, Saurabh, Li Jinlin, Li Lei, Lin, Li zeming,
Miaohe, Bart, Coly, Gaosheng
* tag 'for-6.1/block-2022-10-03' of git://git.kernel.dk/linux: (162 commits)
sbitmap: fix lockup while swapping
block: add rationale for not using blk_mq_plug() when applicable
block: adapt blk_mq_plug() to not plug for writes that require a zone lock
s390/dasd: use blk_mq_alloc_disk
blk-cgroup: don't update the blkg lookup hint in blkg_conf_prep
nvmet: don't look at the request_queue in nvmet_bdev_set_limits
nvmet: don't look at the request_queue in nvmet_bdev_zone_mgmt_emulate_all
blk-mq: use quiesced elevator switch when reinitializing queues
block: replace blk_queue_nowait with bdev_nowait
nvme: remove nvme_ctrl_init_connect_q
nvme-loop: use the tagset alloc/free helpers
nvme-loop: store the generic nvme_ctrl in set->driver_data
nvme-loop: initialize sqsize later
nvme-fc: use the tagset alloc/free helpers
nvme-fc: store the generic nvme_ctrl in set->driver_data
nvme-fc: keep ctrl->sqsize in sync with opts->queue_size
nvme-rdma: use the tagset alloc/free helpers
nvme-rdma: store the generic nvme_ctrl in set->driver_data
nvme-tcp: use the tagset alloc/free helpers
nvme-tcp: store the generic nvme_ctrl in set->driver_data
...
-----BEGIN PGP SIGNATURE-----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=m9kX
-----END PGP SIGNATURE-----
Merge tag 'for-6.1/io_uring-2022-10-03' of git://git.kernel.dk/linux
Pull io_uring updates from Jens Axboe:
- Add supported for more directly managed task_work running.
This is beneficial for real world applications that end up issuing
lots of system calls as part of handling work. Normal task_work will
always execute as we transition in and out of the kernel, even for
"unrelated" system calls. It's more efficient to defer the handling
of io_uring's deferred work until the application wants it to be run,
generally in batches.
As part of ongoing work to write an io_uring network backend for
Thrift, this has been shown to greatly improve performance. (Dylan)
- Add IOPOLL support for passthrough (Kanchan)
- Improvements and fixes to the send zero-copy support (Pavel)
- Partial IO handling fixes (Pavel)
- CQE ordering fixes around CQ ring overflow (Pavel)
- Support sendto() for non-zc as well (Pavel)
- Support sendmsg for zerocopy (Pavel)
- Networking iov_iter fix (Stefan)
- Misc fixes and cleanups (Pavel, me)
* tag 'for-6.1/io_uring-2022-10-03' of git://git.kernel.dk/linux: (56 commits)
io_uring/net: fix notif cqe reordering
io_uring/net: don't update msg_name if not provided
io_uring: don't gate task_work run on TIF_NOTIFY_SIGNAL
io_uring/rw: defer fsnotify calls to task context
io_uring/net: fix fast_iov assignment in io_setup_async_msg()
io_uring/net: fix non-zc send with address
io_uring/net: don't skip notifs for failed requests
io_uring/rw: don't lose short results on io_setup_async_rw()
io_uring/rw: fix unexpected link breakage
io_uring/net: fix cleanup double free free_iov init
io_uring: fix CQE reordering
io_uring/net: fix UAF in io_sendrecv_fail()
selftest/net: adjust io_uring sendzc notif handling
io_uring: ensure local task_work marks task as running
io_uring/net: zerocopy sendmsg
io_uring/net: combine fail handlers
io_uring/net: rename io_sendzc()
io_uring/net: support non-zerocopy sendto
io_uring/net: refactor io_setup_async_addr
io_uring/net: don't lose partial send_zc on fail
...
Make statx() support reporting direct I/O (DIO) alignment information.
This provides a generic interface for userspace programs to determine
whether a file supports DIO, and if so with what alignment restrictions.
Specifically, STATX_DIOALIGN works on block devices, and on regular
files when their containing filesystem has implemented support.
An interface like this has been requested for years, since the
conditions for when DIO is supported in Linux have gotten increasingly
complex over time. Today, DIO support and alignment requirements can be
affected by various filesystem features such as multi-device support,
data journalling, inline data, encryption, verity, compression,
checkpoint disabling, log-structured mode, etc. Further complicating
things, Linux v6.0 relaxed the traditional rule of DIO needing to be
aligned to the block device's logical block size; now user buffers (but
not file offsets) only need to be aligned to the DMA alignment.
The approach of uplifting the XFS specific ioctl XFS_IOC_DIOINFO was
discarded in favor of creating a clean new interface with statx().
For more information, see the individual commits and the man page update
https://lore.kernel.org/r/20220722074229.148925-1-ebiggers@kernel.org.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCYzpV2xQcZWJpZ2dlcnNA
Z29vZ2xlLmNvbQAKCRDzXCl4vpKOKwF1AQDetPX5hyuq0/mwikOywLTTJsoHgGY5
euO+dISqjH/InwD9HAQqfPRkdM1j4ml82BjjkAfrhzZXOOWPKJm0zOhMIQg=
=0Oav
-----END PGP SIGNATURE-----
Merge tag 'statx-dioalign-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull STATX_DIOALIGN support from Eric Biggers:
"Make statx() support reporting direct I/O (DIO) alignment information.
This provides a generic interface for userspace programs to determine
whether a file supports DIO, and if so with what alignment
restrictions. Specifically, STATX_DIOALIGN works on block devices, and
on regular files when their containing filesystem has implemented
support.
An interface like this has been requested for years, since the
conditions for when DIO is supported in Linux have gotten increasingly
complex over time. Today, DIO support and alignment requirements can
be affected by various filesystem features such as multi-device
support, data journalling, inline data, encryption, verity,
compression, checkpoint disabling, log-structured mode, etc.
Further complicating things, Linux v6.0 relaxed the traditional rule
of DIO needing to be aligned to the block device's logical block size;
now user buffers (but not file offsets) only need to be aligned to the
DMA alignment.
The approach of uplifting the XFS specific ioctl XFS_IOC_DIOINFO was
discarded in favor of creating a clean new interface with statx().
For more information, see the individual commits and the man page
update[1]"
Link: https://lore.kernel.org/r/20220722074229.148925-1-ebiggers@kernel.org [1]
* tag 'statx-dioalign-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
xfs: support STATX_DIOALIGN
f2fs: support STATX_DIOALIGN
f2fs: simplify f2fs_force_buffered_io()
f2fs: move f2fs_force_buffered_io() into file.c
ext4: support STATX_DIOALIGN
fscrypt: change fscrypt_dio_supported() to prepare for STATX_DIOALIGN
vfs: support STATX_DIOALIGN on block devices
statx: add direct I/O alignment information
KMSAN doesn't allow treating adjacent memory pages as such, if they were
allocated by different alloc_pages() calls. The block layer however does
so: adjacent pages end up being used together. To prevent this, make
page_is_mergeable() return false under KMSAN.
Link: https://lkml.kernel.org/r/20220915150417.722975-29-glider@google.com
Signed-off-by: Alexander Potapenko <glider@google.com>
Suggested-by: Eric Biggers <ebiggers@google.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Marco Elver <elver@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vegard Nossum <vegard.nossum@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
KMSAN metadata for adjacent physical pages may not be adjacent, therefore
accessing such pages together may lead to metadata corruption. We disable
merging pages in biovec to prevent such corruptions.
Link: https://lkml.kernel.org/r/20220915150417.722975-28-glider@google.com
Signed-off-by: Alexander Potapenko <glider@google.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Marco Elver <elver@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vegard Nossum <vegard.nossum@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Extend blk_rq_map_user_iov so that it can handle bvec iterator, using
the new blk_rq_map_user_bvec function. It maps the pages from bvec
iterator into a bio and place the bio into request.
This helper will be used by nvme for uring-passthrough path when IO is
done using pre-mapped buffers.
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
Suggested-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220930062749.152261-11-anuj20.g@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move bio allocation logic from bio_map_user_iov to a new helper
blk_rq_map_bio_alloc. It is named so because functionality is opposite
of what is done inside blk_mq_map_bio_put. This is a prep patch.
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Link: https://lore.kernel.org/r/20220930062749.152261-10-anuj20.g@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Create a helper blk_rq_map_user_io for mapping of vectored as well as
non-vectored requests. This will help in saving dupilcation of code at few
places in scsi and nvme.
Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
Suggested-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220930062749.152261-4-anuj20.g@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
With end_io handlers now being able to potentially pass ownership of
the request upon completion, we can allow requests with end_io handlers
in the batch completion handling.
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Co-developed-by: Stefan Roesch <shr@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Everything is just converted to returning RQ_END_IO_NONE, and there
should be no functional changes with this patch.
In preparation for allowing the end_io handler to pass ownership back
to the block layer, rather than retain ownership of the request.
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The filesystem IO path can take advantage of allocating batches of
requests, if the underlying submitter tells the block layer about it
through the blk_plug. For passthrough IO, the exported API is the
blk_mq_alloc_request() helper, and that one does not allow for
request caching.
Wire up request caching for blk_mq_alloc_request(), which is generally
done without having a bio available upfront.
Tested-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We've never had any useful reports from this BUG_ON(), and in fact a
number of the BUG_ON()'s in the flush handling need to be turned into
more graceful handling.
In preparation for allowing batched completions of the end_io handling,
where we can enter the flush completion with queuelist having been reused
for the batch, get rid of this BUG_ON().
Signed-off-by: Jens Axboe <axboe@kernel.dk>
* for-6.1/block: (162 commits)
sbitmap: fix lockup while swapping
block: add rationale for not using blk_mq_plug() when applicable
block: adapt blk_mq_plug() to not plug for writes that require a zone lock
s390/dasd: use blk_mq_alloc_disk
blk-cgroup: don't update the blkg lookup hint in blkg_conf_prep
nvmet: don't look at the request_queue in nvmet_bdev_set_limits
nvmet: don't look at the request_queue in nvmet_bdev_zone_mgmt_emulate_all
blk-mq: use quiesced elevator switch when reinitializing queues
block: replace blk_queue_nowait with bdev_nowait
nvme: remove nvme_ctrl_init_connect_q
nvme-loop: use the tagset alloc/free helpers
nvme-loop: store the generic nvme_ctrl in set->driver_data
nvme-loop: initialize sqsize later
nvme-fc: use the tagset alloc/free helpers
nvme-fc: store the generic nvme_ctrl in set->driver_data
nvme-fc: keep ctrl->sqsize in sync with opts->queue_size
nvme-rdma: use the tagset alloc/free helpers
nvme-rdma: store the generic nvme_ctrl in set->driver_data
nvme-tcp: use the tagset alloc/free helpers
nvme-tcp: store the generic nvme_ctrl in set->driver_data
...
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There are two places in the block layer at the moment where
blk_mq_plug() helper could be used instead of directly accessing the
plug from struct current. In both these cases, directly accessing the plug
should not have any consequences for zoned devices.
Make the intent explicit by adding comments instead of introducing unwanted
checks with blk_mq_plug() helper.[1]
[1] https://lore.kernel.org/linux-block/f6e54907-1035-2b2c-6387-ed178be05ccb@kernel.dk/
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Suggested-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/20220929144141.140077-1-p.raghav@samsung.com
[axboe: fixup multi-line comment style]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The current implementation of blk_mq_plug() disables plugging for all
operations that involves a transfer to the device as we just check if
the last bit in op_is_write() function.
Modify blk_mq_plug() to disable plugging only for REQ_OP_WRITE and
REQ_OP_WRITE_ZEROS as they might require a zone lock.
Suggested-by: Christoph Hellwig <hch@lst.de>
Suggested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20220929074745.103073-2-p.raghav@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blkg_conf_prep just creates a new blkg structure, there is no real
need to update the lookup hint which should only be done on a
successful lookup in the I/O path.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220927065425.257876-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The hctx's run_work may be racing with the elevator switch when
reinitializing hardware queues. The queue is merely frozen in this
context, but that only prevents requests from allocating and doesn't
stop the hctx work from running. The work may get an elevator pointer
that's being torn down, and can result in use-after-free errors and
kernel panics (example below). Use the quiesced elevator switch instead,
and make the previous one static since it is now only used locally.
nvme nvme0: resetting controller
nvme nvme0: 32/0/0 default/read/poll queues
BUG: kernel NULL pointer dereference, address: 0000000000000008
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 80000020c8861067 P4D 80000020c8861067 PUD 250f8c8067 PMD 0
Oops: 0000 [#1] SMP PTI
Workqueue: kblockd blk_mq_run_work_fn
RIP: 0010:kyber_has_work+0x29/0x70
...
Call Trace:
__blk_mq_do_dispatch_sched+0x83/0x2b0
__blk_mq_sched_dispatch_requests+0x12e/0x170
blk_mq_sched_dispatch_requests+0x30/0x60
__blk_mq_run_hw_queue+0x2b/0x50
process_one_work+0x1ef/0x380
worker_thread+0x2d/0x3e0
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220927155652.3260724-1-kbusch@fb.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Replace blk_queue_nowait with a bdev_nowait helpers that takes the
block_device given that the I/O submission path should not have to
look into the request_queue.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Pankaj Raghav <p.raghav@samsung.com>
Link: https://lore.kernel.org/r/20220927075815.269694-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Prepare for storing the blkcg information in the gendisk instead of
the request_queue.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andreas Herrmann <aherrmann@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220921180501.1539876-18-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pass the gendisk to blkcg_schedule_throttle as part of moving the
blk-cgroup infrastructure to be gendisk based. Remove the unused
!BLK_CGROUP stub while we're at it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andreas Herrmann <aherrmann@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220921180501.1539876-17-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
