For device mapper targets to take advantage of IMA's measurement
capabilities, the status functions for the individual targets need to be
updated to handle the status_type_t case for value STATUSTYPE_IMA.
Update status functions for the following target types, to log their
respective attributes to be measured using IMA.
01. cache
02. crypt
03. integrity
04. linear
05. mirror
06. multipath
07. raid
08. snapshot
09. striped
10. verity
For rest of the targets, handle the STATUSTYPE_IMA case by setting the
measurement buffer to NULL.
For IMA to measure the data on a given system, the IMA policy on the
system needs to be updated to have the following line, and the system
needs to be restarted for the measurements to take effect.
/etc/ima/ima-policy
measure func=CRITICAL_DATA label=device-mapper template=ima-buf
The measurements will be reflected in the IMA logs, which are located at:
/sys/kernel/security/integrity/ima/ascii_runtime_measurements
/sys/kernel/security/integrity/ima/binary_runtime_measurements
These IMA logs can later be consumed by various attestation clients
running on the system, and send them to external services for attesting
the system.
The DM target data measured by IMA subsystem can alternatively
be queried from userspace by setting DM_IMA_MEASUREMENT_FLAG with
DM_TABLE_STATUS_CMD.
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
A given block device is identified by it's name and UUID. However, both
these parameters can be renamed. For an external attestation service to
correctly attest a given device, it needs to keep track of these rename
events.
Update the device data with the new values for IMA measurements. Measure
both old and new device name/UUID parameters in the same IMA measurement
event, so that the old and the new values can be connected later.
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
For a given block device, an inactive table slot contains the parameters
to configure the device with. The inactive table can be cleared
multiple times, accidentally or maliciously, which may impact the
functionality of the device, and compromise the system. Therefore it is
important to measure and log the event when a table is cleared.
Measure device parameters, and table hashes when the inactive table slot
is cleared.
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Presence of an active block-device, configured with expected parameters,
is important for an external attestation service to determine if a system
meets the attestation requirements. Therefore it is important for DM to
measure the device remove events.
Measure device parameters and table hashes when the device is removed,
using either remove or remove_all.
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
A given block device can load a table multiple times, with different
input parameters, before eventually resuming it. Further, a device may
be suspended and then resumed. The device may never resume after a
table-load. Because of the above valid scenarios for a given device,
it is important to measure and log the device resume event using IMA.
Also, if the table is large, measuring it in clear-text each time the
device changes state, will unnecessarily increase the size of IMA log.
Since the table clear-text is already measured during table-load event,
measuring the hash during resume should be sufficient to validate the
table contents.
Measure the device parameters, and hash of the active table, when the
device is resumed.
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
DM configures a block device with various target specific attributes
passed to it as a table. DM loads the table, and calls each target’s
respective constructors with the attributes as input parameters.
Some of these attributes are critical to ensure the device meets
certain security bar. Thus, IMA should measure these attributes, to
ensure they are not tampered with, during the lifetime of the device.
So that the external services can have high confidence in the
configuration of the block-devices on a given system.
Some devices may have large tables. And a given device may change its
state (table-load, suspend, resume, rename, remove, table-clear etc.)
many times. Measuring these attributes each time when the device
changes its state will significantly increase the size of the IMA logs.
Further, once configured, these attributes are not expected to change
unless a new table is loaded, or a device is removed and recreated.
Therefore the clear-text of the attributes should only be measured
during table load, and the hash of the active/inactive table should be
measured for the remaining device state changes.
Export IMA function ima_measure_critical_data() to allow measurement
of DM device parameters, as well as target specific attributes, during
table load. Compute the hash of the inactive table and store it for
measurements during future state change. If a load is called multiple
times, update the inactive table hash with the hash of the latest
populated table. So that the correct inactive table hash is measured
when the device transitions to different states like resume, remove,
rename, etc.
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com> # leak fix
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Add 10 counters for various events (hit, miss, etc) and export them in
the status line (accessed from userspace with "dmsetup status"). Also
add a message "clear_stats" that resets these counters.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
If some "writecache_map_*" function returns invalid state, it is a bug.
So, we should report it and not fail silently.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Factor out writecache_map_flush() and writecache_map_discard() from
writecache_map(). Also eliminate the various goto labels in
writecache_map().
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Fix the !CONFIG_BLOCK build after the recent cleanup.
Fixes: 5ed964f8e5 ("mm: hide laptop_mode_wb_timer entirely behind the BDI API")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When merging one bio to request, if they are discard IO and the queue
supports multi-range discard, we need to return ELEVATOR_DISCARD_MERGE
because both block core and related drivers(nvme, virtio-blk) doesn't
handle mixed discard io merge(traditional IO merge together with
discard merge) well.
Fix the issue by returning ELEVATOR_DISCARD_MERGE in this situation,
so both blk-mq and drivers just need to handle multi-range discard.
Reported-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Fixes: 2705dfb209 ("block: fix discard request merge")
Link: https://lore.kernel.org/r/20210729034226.1591070-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Just retrieve the bdi from the disk.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20210809141744.1203023-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The backing device information only makes sense for file system I/O,
and thus belongs into the gendisk and not the lower level request_queue
structure. Move it there.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20210809141744.1203023-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a helper to check if a gendisk is associated with a request_queue.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20210809141744.1203023-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
.. and rename the function to disk_update_readahead. This is in
preparation for moving the BDI from the request_queue to the gendisk.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20210809141744.1203023-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Don't leak the detaіls of the timer into the block layer, instead
initialize the timer in bdi_alloc and delete it in bdi_unregister.
Note that this means the timer is initialized (but not armed) for
non-block queues as well now.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20210809141744.1203023-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that device mapper has been changed to register the disk once
it is fully ready all this code is unused.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20210804094147.459763-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
device mapper is currently the only outlier that tries to call
register_disk after add_disk, leading to fairly inconsistent state
of these block layer data structures. Instead change device-mapper
to just register the gendisk later now that the holder mechanism
can cope with that.
Note that this introduces a user visible change: the dm kobject is
now only visible after the initial table has been loaded.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20210804094147.459763-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move setting md->type from both callers into dm_setup_md_queue.
This ensures that md->type is only set to a valid value after the queue
has been fully setup, something we'll rely on future changes.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20210804094147.459763-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
md->queue is now always set when md->disk is set, so simplify the
conditionals a bit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20210804094147.459763-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
device mapper needs to register holders before it is ready to do I/O.
Currently it does so by registering the disk early, which can leave
the disk and queue in a weird half state where the queue is registered
with the disk, except for sysfs and the elevator. And this state has
been a bit promlematic before, and will get more so when sorting out
the responsibilities between the queue and the disk.
Support registering holders on an initialized but not registered disk
instead by delaying the sysfs registration until the disk is registered.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20210804094147.459763-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Invert they way the holder relations are tracked. This very
slightly reduces the memory overhead for partitioned devices.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210804094147.459763-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since commit 0d02129e76 ("block: merge struct block_device and struct
hd_struct") there is no way for the bdev to go away as long as there is
a holder, so remove the extra references.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20210804094147.459763-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the block holder code into a separate file as it is not in any way
related to the other block_dev.c code, and add a new selectable config
option for it so that we don't have to build it without any remapped
drivers selected.
The Kconfig symbol contains a _DEPRECATED suffix to match the comments
added in commit 49731baa41
("block: restore multiple bd_link_disk_holder() support").
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20210804094147.459763-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We noticed that the user interface of Android devices becomes very slow
under memory pressure. This is because Android uses the zram driver on top
of the loop driver for swapping, because under memory pressure the swap
code alternates reads and writes quickly, because mq-deadline is the
default scheduler for loop devices and because mq-deadline delays writes by
five seconds for such a workload with default settings. Fix this by making
the kernel select I/O scheduler 'none' from inside add_disk() for loop
devices. This default can be overridden at any time from user space,
e.g. via a udev rule. This approach has an advantage compared to changing
the I/O scheduler from userspace from 'mq-deadline' into 'none', namely
that synchronize_rcu() does not get called.
This patch changes the default I/O scheduler for loop devices from
'mq-deadline' into 'none'.
Additionally, this patch reduces the Android boot time on my test setup
with 0.5 seconds compared to configuring the loop I/O scheduler from user
space.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Martijn Coenen <maco@android.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20210805174200.3250718-3-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
elevator_get_default() uses the following algorithm to select an I/O
scheduler from inside add_disk():
- In case of a single hardware queue or if sharing hardware queues across
multiple request queues (BLK_MQ_F_TAG_HCTX_SHARED), use mq-deadline.
- Otherwise, use 'none'.
This is a good choice for most but not for all block drivers. Make it
possible to override the selection of mq-deadline with a new flag,
namely BLK_MQ_F_NO_SCHED_BY_DEFAULT.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Martijn Coenen <maco@android.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20210805174200.3250718-2-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In block/blk-mq-sysfs.c, struct blk_mq_ctx_sysfs_entry is not used to
define any attribute since the "mq" sysfs directory contains only
sub-directories (no attribute files). As a result, blk_mq_sysfs_show(),
blk_mq_sysfs_store(), and struct sysfs_ops blk_mq_sysfs_ops are all
unused and unnecessary. Remove all this unused code.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Link: https://lore.kernel.org/r/20210713081837.524422-1-damien.lemoal@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Refactor disk_check_events() and move some code into disk_event_uevent().
Then add disk_force_media_change(), a helper which will be used by
devices to force issuing a DISK_EVENT_MEDIA_CHANGE event.
Co-developed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Tested-by: Luca Boccassi <bluca@debian.org>
Link: https://lore.kernel.org/r/20210712230530.29323-6-mcroce@linux.microsoft.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a new sysfs handle to export the new diskseq value.
Place it in <sysfs>/block/<disk>/diskseq and document it.
$ grep . /sys/class/block/*/diskseq
/sys/class/block/loop0/diskseq:13
/sys/class/block/loop1/diskseq:14
/sys/class/block/loop2/diskseq:5
/sys/class/block/loop3/diskseq:6
/sys/class/block/ram0/diskseq:1
/sys/class/block/ram1/diskseq:2
/sys/class/block/vda/diskseq:7
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Tested-by: Luca Boccassi <bluca@debian.org>
Link: https://lore.kernel.org/r/20210712230530.29323-5-mcroce@linux.microsoft.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Associating uevents with block devices in userspace is difficult and racy:
the uevent netlink socket is lossy, and on slow and overloaded systems
has a very high latency.
Block devices do not have exclusive owners in userspace, any process can
set one up (e.g. loop devices). Moreover, device names can be reused
(e.g. loop0 can be reused again and again). A userspace process setting
up a block device and watching for its events cannot thus reliably tell
whether an event relates to the device it just set up or another earlier
instance with the same name.
Being able to set a UUID on a loop device would solve the race conditions.
But it does not allow to derive orderings from uevents: if you see a
uevent with a UUID that does not match the device you are waiting for,
you cannot tell whether it's because the right uevent has not arrived yet,
or it was already sent and you missed it. So you cannot tell whether you
should wait for it or not.
Associating a unique, monotonically increasing sequential number to the
lifetime of each block device, which can be retrieved with an ioctl
immediately upon setting it up, allows to solve the race conditions with
uevents, and also allows userspace processes to know whether they should
wait for the uevent they need or if it was dropped and thus they should
move on.
Additionally, increment the disk sequence number when the media change,
i.e. on DISK_EVENT_MEDIA_CHANGE event.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Tested-by: Luca Boccassi <bluca@debian.org>
Link: https://lore.kernel.org/r/20210712230530.29323-2-mcroce@linux.microsoft.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
cmdline-parser.c is only used by the cmdline faux partition format,
so merge the code into that and avoid an indirect call.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210728053756.409654-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Remove the disk_name function now that all users are gone.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20210727062518.122108-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
disk_name for partition 0 just copies out the disk_name field. Replace
the call to disk_name with a %s format specifier.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20210727062518.122108-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Printk ->disk_name directly for the disk and use the %pg format specifier
for the block device, which is equivalent to a bdevname call.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20210727062518.122108-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Simplify printing the partition name by using the %pg format specifier
that is equivalent to a bdevname call.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20210727062518.122108-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Simplify printing the partition name by using the %pg format specifier
that is equivalent to a bdevname call.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20210727062518.122108-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
I have compiled the kernel with a cross compiler "hppa-linux-gnu-" v9.3.0
on x86-64 host machine. I got the following warning:
block/genhd.c: In function ‘diskstats_show’:
block/genhd.c:1227:1: warning: the frame size of 1688 bytes is larger
than 1280 bytes [-Wframe-larger-than=]
1227 | }
By Reduced the stack footprint by using the %pg printk specifier instead
of disk_name to remove the need for the on-stack buffer.
Signed-off-by: Abd-Alrhman Masalkhi <abd.masalkhi@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20210727062518.122108-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that we've stopped using inode references for anything meaninful
in the block layer get rid of the helper to put it and just open code
the call to iput on the block_device inode.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Chaitanya Kulkarni <ckulkarnilinux@gmail.com>
Link: https://lore.kernel.org/r/20210722075402.983367-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
All callers are gone, and no one should grab a pure inode reference to
a block device anymore.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20210722075402.983367-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The whole device block device won't be removed while the disk is still
alive, so don't bother to grab a reference to it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Ming Lei <ming.lei@rehat.com>
Reviewed-by: Chaitanya Kulkarni <ckulkarnilinux@gmail.com>
Link: https://lore.kernel.org/r/20210722075402.983367-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Instead of acquiring an inode reference on open make sure partitions
always hold device model references to the disk while alive, and switch
open to grab only a device model reference to the opened block device.
If that is a partition the disk reference is transitively held by the
partition already.
Link: https://lore.kernel.org/r/20210722075402.983367-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the allocation of bd_meta_info after initializing the struct device
to avoid the special bdput error handling path.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20210722075402.983367-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Unhash the whole device inode early in del_gendisk. This allows to
remove the first GENHD_FL_UP check in the open path as we simply
won't find a just removed inode. The second non-racy check after
taking open_mutex is still kept.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210722075402.983367-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a lockdep assert instead of the outdated locking comment.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Chaitanya Kulkarni <ckulkarnilinux@gmail.com>
Link: https://lore.kernel.org/r/20210722075402.983367-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Using local kmaps slightly reduces the chances to stray writes, and
the bvec interface cleans up the code a little bit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20210727055646.118787-16-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
