- Various preparatory cleanups & enhancements of the timer-wheel code,
in preparation for the WIP 'pull timers at expiry' timer migration model
series (which will replace the current 'push timers at enqueue' migration
model), by Anna-Maria Behnsen:
- Update comments and clean up confusing variable names
- Add debug check to warn about time travel
- Improve/expand timer-wheel tracepoints
- Optimize away unnecessary IPIs for deferrable timers
- Restructure & clean up next_expiry_recalc()
- Clean up forward_timer_base()
- Introduce __forward_timer_base() and use it to simplify
and micro-optimize get_next_timer_interrupt()
- Restructure the get_next_timer_interrupt()'s idle logic
for better readability and to enable a minor optimization.
- Fix the nextevt calculation when no timers are pending
- Fix the sysfs_get_uname() prototype declaration
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmWb0XIRHG1pbmdvQGtl
cm5lbC5vcmcACgkQEnMQ0APhK1h9kg/9FpjbiogIKrDXb/pJHyhYkK6jzN4aNrQo
wsOz4FDKyvioqLfr5ndpFE++DwsyzUibPfHJzfwD5IilTyolm2jW44VSCBzNdm72
lI6NGIcIxmIeCuO4bLmJj/fuQAugQ+ajmA2pyC/aBSO4Q2jtnxjYMGiV9zMWmOsa
E816CK5zp6IVx+w0GWwK5yW5YR5dscSQCD+mBYVAdTWYoRNTy6xonsMTRuNi0ePx
donetpu0eWG9NGwUdax/65oKVLZMR/rKAI/3pInhkOS9BsL2o8Rt4o2Y+9aBFi2t
2m+ZbFg5hngJwhP8Mfc7A+I3qiWgCOMGNGrebyzlwb+0PnNBPzrwnNPveW3R9QRx
LMxSU3aH66bXeX+YCF4y2tjWSmYooAnztPstUGrs+sq36+NF0wyY6ip/36S6MRGk
zjedqWnrHQeeZlzOLiKNzB+FIBnOt6bhZEh1Wk1/zwi9UWxw+7+I6tR0b57NqRxZ
VHq38fp+O2OEAj5JvwJ6FomOd+onqQ2wwveG5OMCa+hwM2ZCuVXQRYgM2ohMfwl3
BMSd3KMZsBiHT0zyun3k/uJ7CaIjArPh016baSS10ArSl9sE64aJj7ELtuSLqtaD
idJFXu3tv6VgDT2rMhLWNHvzQoK+gb8+/qnms4Ea+wY2f7nubi0aH20qHfugkgis
4KOkw9cQw0U=
=n40J
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2024-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer subsystem updates from Ingo Molnar:
- Various preparatory cleanups & enhancements of the timer-wheel code,
in preparation for the WIP 'pull timers at expiry' timer migration
model series (which will replace the current 'push timers at enqueue'
migration model), by Anna-Maria Behnsen:
- Update comments and clean up confusing variable names
- Add debug check to warn about time travel
- Improve/expand timer-wheel tracepoints
- Optimize away unnecessary IPIs for deferrable timers
- Restructure & clean up next_expiry_recalc()
- Clean up forward_timer_base()
- Introduce __forward_timer_base() and use it to simplify and
micro-optimize get_next_timer_interrupt()
- Restructure the get_next_timer_interrupt()'s idle logic for better
readability and to enable a minor optimization.
- Fix the nextevt calculation when no timers are pending
- Fix the sysfs_get_uname() prototype declaration
* tag 'timers-core-2024-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timers: Fix nextevt calculation when no timers are pending
timers: Rework idle logic
timers: Use already existing function for forwarding timer base
timers: Split out forward timer base functionality
timers: Clarify check in forward_timer_base()
timers: Move store of next event into __next_timer_interrupt()
timers: Do not IPI for deferrable timers
tracing/timers: Add tracepoint for tracking timer base is_idle flag
tracing/timers: Enhance timer_start tracepoint
tick-sched: Warn when next tick seems to be in the past
tick/sched: Cleanup confusing variables
tick-sched: Fix function names in comments
time: Make sysfs_get_uname() function visible in header
Only the posix timer system calls use this (when the posix timer support
is disabled, which does not actually happen in any normal case), because
they had debug code to print out a warning about missing system calls.
Get rid of that special case, and just use the standard COND_SYSCALL
interface that creates weak system call stubs that return -ENOSYS for
when the system call does not exist.
This fixes a kCFI issue with the SYS_NI() hackery:
CFI failure at int80_emulation+0x67/0xb0 (target: sys_ni_posix_timers+0x0/0x70; expected type: 0xb02b34d9)
WARNING: CPU: 0 PID: 48 at int80_emulation+0x67/0xb0
Reported-by: kernel test robot <oliver.sang@intel.com>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When no timer is queued into an empty timer base, the next_expiry will not
be updated. It was originally calculated as
base->clk + NEXT_TIMER_MAX_DELTA
When the timer base stays empty long enough (> NEXT_TIMER_MAX_DELTA), the
next_expiry value of the empty base suggests that there is a timer pending
soon. This might be more a kind of a theoretical problem, but the fix
doesn't hurt.
Use only base->next_expiry value as nextevt when timers are
pending. Otherwise nextevt will be jiffies + NEXT_TIMER_MAX_DELTA. As all
information is in place, update base->next_expiry value of the empty timer
base as well.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20231201092654.34614-13-anna-maria@linutronix.de
To improve readability of the code, split base->idle calculation and
expires calculation into separate parts. While at it, update the comment
about timer base idle marking.
Thereby the following subtle change happens if the next event is just one
jiffy ahead and the tick was already stopped: Originally base->is_idle
remains true in this situation. Now base->is_idle turns to false. This may
spare an IPI if a timer is enqueued remotely to an idle CPU that is going
to tick on the next jiffy.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20231201092654.34614-12-anna-maria@linutronix.de
There is an already existing function for forwarding the timer
base. Forwarding the timer base is implemented directly in
get_next_timer_interrupt() as well.
Remove the code duplication and invoke __forward_timer_base() instead.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20231201092654.34614-11-anna-maria@linutronix.de
Forwarding timer base is done when the next expiry value is calculated and
when a new timer is enqueued. When the next expiry value is calculated the
jiffies value is already available and does not need to be reread a second
time.
Splitting out the forward timer base functionality to make it executable
via both contextes - those where jiffies are already known and those, where
jiffies need to be read.
No functional change.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20231201092654.34614-10-anna-maria@linutronix.de
The current check whether a forward of the timer base is required can be
simplified by using an already existing comparison function which is easier
to read. The related comment is outdated and was not updated when the check
changed in commit 36cd28a4cd ("timers: Lower base clock forwarding
threshold").
Use time_before_eq() for the check and replace the comment by copying the
comment from the same check inside get_next_timer_interrupt(). Move the
precious information of the outdated comment to the proper place in
__run_timers().
No functional change.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20231201092654.34614-9-anna-maria@linutronix.de
Both call sites of __next_timer_interrupt() store the return value directly
in base->next_expiry. Move the store into __next_timer_interrupt() and to
make its purpose more clear, rename the function to next_expiry_recalc().
No functional change.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20231201092654.34614-8-anna-maria@linutronix.de
Deferrable timers do not prevent CPU from going idle and are not taken into
account on idle path. Sending an IPI to a remote CPU when a new first
deferrable timer was enqueued will wake up the remote CPU but nothing will
be done regarding the deferrable timers.
Drop IPI completely when a new first deferrable timer was enqueued.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20231201092654.34614-7-anna-maria@linutronix.de
When debugging timer code the timer tracepoints are very important. There
is no tracepoint when the is_idle flag of the timer base changes. Instead
of always adding manually trace_printk(), add tracepoints which can be
easily enabled whenever required.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20231201092654.34614-6-anna-maria@linutronix.de
For starting a timer, the timer is enqueued into a bucket of the timer
wheel. The bucket expiry is the defacto expiry of the timer but it is not
equal the timer expiry because of increasing granularity when bucket is in
a higher level of the wheel. To be able to figure out in a trace whether a
timer expired in time or not, the bucket expiry time is required as well.
Add bucket expiry time to the timer_start tracepoint and thereby simplify
the arguments.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20231201092654.34614-5-anna-maria@linutronix.de
When the next tick is in the past, the delta between basemono and the next
tick gets negativ. But the next tick should never be in the past. The
negative effect of a wrong next tick might be a stop of the tick and timers
might expire late.
To prevent expensive debugging when changing underlying code, add a
WARN_ON_ONCE into this code path. To prevent complete misbehaviour, also
reset next_tick to basemono in this case.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20231201092654.34614-4-anna-maria@linutronix.de
tick_nohz_stop_tick() contains the expires (u64 variable) and tick
(ktime_t) variable. In the beginning the value of expires is written to
tick. Afterwards none of the variables is changed. They are only used for
checks.
Drop the not required variable tick and use always expires instead.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20231201092654.34614-3-anna-maria@linutronix.de
When referencing functions in comments, it might be helpful to use full
function names (including the prefix) to be able to find it when grepping.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20231201092654.34614-2-anna-maria@linutronix.de
This function is defined globally in clocksource.c and used conditionally
in clockevent.c, which the declaration hidden when clockevent support
is disabled. This causes a harmless warning in the definition:
kernel/time/clocksource.c:1324:9: warning: no previous prototype for 'sysfs_get_uname' [-Wmissing-prototypes]
1324 | ssize_t sysfs_get_uname(const char *buf, char *dst, size_t cnt)
Move the declaration out of the #ifdef so it is always visible.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231108125843.3806765-5-arnd@kernel.org
offlined earlier in the offlining process in order to prevent
a deadlock
-----BEGIN PGP SIGNATURE-----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=Tekh
-----END PGP SIGNATURE-----
Merge tag 'timers_urgent_for_v6.7_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Borislav Petkov:
- Do the push of pending hrtimers away from a CPU which is being
offlined earlier in the offlining process in order to prevent a
deadlock
* tag 'timers_urgent_for_v6.7_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
hrtimers: Push pending hrtimers away from outgoing CPU earlier
2b8272ff4a ("cpu/hotplug: Prevent self deadlock on CPU hot-unplug")
solved the straight forward CPU hotplug deadlock vs. the scheduler
bandwidth timer. Yu discovered a more involved variant where a task which
has a bandwidth timer started on the outgoing CPU holds a lock and then
gets throttled. If the lock required by one of the CPU hotplug callbacks
the hotplug operation deadlocks because the unthrottling timer event is not
handled on the dying CPU and can only be recovered once the control CPU
reaches the hotplug state which pulls the pending hrtimers from the dead
CPU.
Solve this by pushing the hrtimers away from the dying CPU in the dying
callbacks. Nothing can queue a hrtimer on the dying CPU at that point because
all other CPUs spin in stop_machine() with interrupts disabled and once the
operation is finished the CPU is marked offline.
Reported-by: Yu Liao <liaoyu15@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Liu Tie <liutie4@huawei.com>
Link: https://lore.kernel.org/r/87a5rphara.ffs@tglx
Core & protocols
----------------
- Support usec resolution of TCP timestamps, enabled selectively by
a route attribute.
- Defer regular TCP ACK while processing socket backlog, try to send
a cumulative ACK at the end. Increase single TCP flow performance
on a 200Gbit NIC by 20% (100Gbit -> 120Gbit).
- The Fair Queuing (FQ) packet scheduler:
- add built-in 3 band prio / WRR scheduling
- support bypass if the qdisc is mostly idle (5% speed up for TCP RR)
- improve inactive flow reporting
- optimize the layout of structures for better cache locality
- Support TCP Authentication Option (RFC 5925, TCP-AO), a more modern
replacement for the old MD5 option.
- Add more retransmission timeout (RTO) related statistics to TCP_INFO.
- Support sending fragmented skbs over vsock sockets.
- Make sure we send SIGPIPE for vsock sockets if socket was shutdown().
- Add sysctl for ignoring lower limit on lifetime in Router
Advertisement PIO, based on an in-progress IETF draft.
- Add sysctl to control activation of TCP ping-pong mode.
- Add sysctl to make connection timeout in MPTCP configurable.
- Support rcvlowat and notsent_lowat on MPTCP sockets, to help apps
limit the number of wakeups.
- Support netlink GET for MDB (multicast forwarding), allowing user
space to request a single MDB entry instead of dumping the entire
table.
- Support selective FDB flushing in the VXLAN tunnel driver.
- Allow limiting learned FDB entries in bridges, prevent OOM attacks.
- Allow controlling via configfs netconsole targets which were created
via the kernel cmdline at boot, rather than via configfs at runtime.
- Support multiple PTP timestamp event queue readers with different
filters.
- MCTP over I3C.
BPF
---
- Add new veth-like netdevice where BPF program defines the logic
of the xmit routine. It can operate in L3 and L2 mode.
- Support exceptions - allow asserting conditions which should
never be true but are hard for the verifier to infer.
With some extra flexibility around handling of the exit / failure.
https://lwn.net/Articles/938435/
- Add support for local per-cpu kptr, allow allocating and storing
per-cpu objects in maps. Access to those objects operates on
the value for the current CPU. This allows to deprecate local
one-off implementations of per-CPU storage like
BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE maps.
- Extend cgroup BPF sockaddr hooks for UNIX sockets. The use case is
for systemd to re-implement the LogNamespace feature which allows
running multiple instances of systemd-journald to process the logs
of different services.
- Enable open-coded task_vma iteration, after maple tree conversion
made it hard to directly walk VMAs in tracing programs.
- Add open-coded task, css_task and css iterator support.
One of the use cases is customizable OOM victim selection via BPF.
- Allow source address selection with bpf_*_fib_lookup().
- Add ability to pin BPF timer to the current CPU.
- Prevent creation of infinite loops by combining tail calls and
fentry/fexit programs.
- Add missed stats for kprobes to retrieve the number of missed kprobe
executions and subsequent executions of BPF programs.
- Inherit system settings for CPU security mitigations.
- Add BPF v4 CPU instruction support for arm32 and s390x.
Changes to common code
----------------------
- overflow: add DEFINE_FLEX() for on-stack definition of structs
with flexible array members.
- Process doc update with more guidance for reviewers.
Driver API
----------
- Simplify locking in WiFi (cfg80211 and mac80211 layers), use wiphy
mutex in most places and remove a lot of smaller locks.
- Create a common DPLL configuration API. Allow configuring
and querying state of PLL circuits used for clock syntonization,
in network time distribution.
- Unify fragmented and full page allocation APIs in page pool code.
Let drivers be ignorant of PAGE_SIZE.
- Rework PHY state machine to avoid races with calls to phy_stop().
- Notify DSA drivers of MAC address changes on user ports, improve
correctness of offloads which depend on matching port MAC addresses.
- Allow antenna control on injected WiFi frames.
- Reduce the number of variants of napi_schedule().
- Simplify error handling when composing devlink health messages.
Misc
----
- A lot of KCSAN data race "fixes", from Eric.
- A lot of __counted_by() annotations, from Kees.
- A lot of strncpy -> strscpy and printf format fixes.
- Replace master/slave terminology with conduit/user in DSA drivers.
- Handful of KUnit tests for netdev and WiFi core.
Removed
-------
- AppleTalk COPS.
- AppleTalk ipddp.
- TI AR7 CPMAC Ethernet driver.
Drivers
-------
- Ethernet high-speed NICs:
- Intel (100G, ice, idpf):
- add a driver for the Intel E2000 IPUs
- make CRC/FCS stripping configurable
- cross-timestamping for E823 devices
- basic support for E830 devices
- use aux-bus for managing client drivers
- i40e: report firmware versions via devlink
- nVidia/Mellanox:
- support 4-port NICs
- increase max number of channels to 256
- optimize / parallelize SF creation flow
- Broadcom (bnxt):
- enhance NIC temperature reporting
- support PAM4 speeds and lane configuration
- Marvell OcteonTX2:
- PTP pulse-per-second output support
- enable hardware timestamping for VFs
- Solarflare/AMD:
- conntrack NAT offload and offload for tunnels
- Wangxun (ngbe/txgbe):
- expose HW statistics
- Pensando/AMD:
- support PCI level reset
- narrow down the condition under which skbs are linearized
- Netronome/Corigine (nfp):
- support CHACHA20-POLY1305 crypto in IPsec offload
- Ethernet NICs embedded, slower, virtual:
- Synopsys (stmmac):
- add Loongson-1 SoC support
- enable use of HW queues with no offload capabilities
- enable PPS input support on all 5 channels
- increase TX coalesce timer to 5ms
- RealTek USB (r8152): improve efficiency of Rx by using GRO frags
- xen: support SW packet timestamping
- add drivers for implementations based on TI's PRUSS (AM64x EVM)
- nVidia/Mellanox Ethernet datacenter switches:
- avoid poor HW resource use on Spectrum-4 by better block selection
for IPv6 multicast forwarding and ordering of blocks in ACL region
- Ethernet embedded switches:
- Microchip:
- support configuring the drive strength for EMI compliance
- ksz9477: partial ACL support
- ksz9477: HSR offload
- ksz9477: Wake on LAN
- Realtek:
- rtl8366rb: respect device tree config of the CPU port
- Ethernet PHYs:
- support Broadcom BCM5221 PHYs
- TI dp83867: support hardware LED blinking
- CAN:
- add support for Linux-PHY based CAN transceivers
- at91_can: clean up and use rx-offload helpers
- WiFi:
- MediaTek (mt76):
- new sub-driver for mt7925 USB/PCIe devices
- HW wireless <> Ethernet bridging in MT7988 chips
- mt7603/mt7628 stability improvements
- Qualcomm (ath12k):
- WCN7850:
- enable 320 MHz channels in 6 GHz band
- hardware rfkill support
- enable IEEE80211_HW_SINGLE_SCAN_ON_ALL_BANDS
to make scan faster
- read board data variant name from SMBIOS
- QCN9274: mesh support
- RealTek (rtw89):
- TDMA-based multi-channel concurrency (MCC)
- Silicon Labs (wfx):
- Remain-On-Channel (ROC) support
- Bluetooth:
- ISO: many improvements for broadcast support
- mark BCM4378/BCM4387 as BROKEN_LE_CODED
- add support for QCA2066
- btmtksdio: enable Bluetooth wakeup from suspend
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=46nS
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Support usec resolution of TCP timestamps, enabled selectively by a
route attribute.
- Defer regular TCP ACK while processing socket backlog, try to send
a cumulative ACK at the end. Increase single TCP flow performance
on a 200Gbit NIC by 20% (100Gbit -> 120Gbit).
- The Fair Queuing (FQ) packet scheduler:
- add built-in 3 band prio / WRR scheduling
- support bypass if the qdisc is mostly idle (5% speed up for TCP RR)
- improve inactive flow reporting
- optimize the layout of structures for better cache locality
- Support TCP Authentication Option (RFC 5925, TCP-AO), a more modern
replacement for the old MD5 option.
- Add more retransmission timeout (RTO) related statistics to
TCP_INFO.
- Support sending fragmented skbs over vsock sockets.
- Make sure we send SIGPIPE for vsock sockets if socket was
shutdown().
- Add sysctl for ignoring lower limit on lifetime in Router
Advertisement PIO, based on an in-progress IETF draft.
- Add sysctl to control activation of TCP ping-pong mode.
- Add sysctl to make connection timeout in MPTCP configurable.
- Support rcvlowat and notsent_lowat on MPTCP sockets, to help apps
limit the number of wakeups.
- Support netlink GET for MDB (multicast forwarding), allowing user
space to request a single MDB entry instead of dumping the entire
table.
- Support selective FDB flushing in the VXLAN tunnel driver.
- Allow limiting learned FDB entries in bridges, prevent OOM attacks.
- Allow controlling via configfs netconsole targets which were
created via the kernel cmdline at boot, rather than via configfs at
runtime.
- Support multiple PTP timestamp event queue readers with different
filters.
- MCTP over I3C.
BPF:
- Add new veth-like netdevice where BPF program defines the logic of
the xmit routine. It can operate in L3 and L2 mode.
- Support exceptions - allow asserting conditions which should never
be true but are hard for the verifier to infer. With some extra
flexibility around handling of the exit / failure:
https://lwn.net/Articles/938435/
- Add support for local per-cpu kptr, allow allocating and storing
per-cpu objects in maps. Access to those objects operates on the
value for the current CPU.
This allows to deprecate local one-off implementations of per-CPU
storage like BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE maps.
- Extend cgroup BPF sockaddr hooks for UNIX sockets. The use case is
for systemd to re-implement the LogNamespace feature which allows
running multiple instances of systemd-journald to process the logs
of different services.
- Enable open-coded task_vma iteration, after maple tree conversion
made it hard to directly walk VMAs in tracing programs.
- Add open-coded task, css_task and css iterator support. One of the
use cases is customizable OOM victim selection via BPF.
- Allow source address selection with bpf_*_fib_lookup().
- Add ability to pin BPF timer to the current CPU.
- Prevent creation of infinite loops by combining tail calls and
fentry/fexit programs.
- Add missed stats for kprobes to retrieve the number of missed
kprobe executions and subsequent executions of BPF programs.
- Inherit system settings for CPU security mitigations.
- Add BPF v4 CPU instruction support for arm32 and s390x.
Changes to common code:
- overflow: add DEFINE_FLEX() for on-stack definition of structs with
flexible array members.
- Process doc update with more guidance for reviewers.
Driver API:
- Simplify locking in WiFi (cfg80211 and mac80211 layers), use wiphy
mutex in most places and remove a lot of smaller locks.
- Create a common DPLL configuration API. Allow configuring and
querying state of PLL circuits used for clock syntonization, in
network time distribution.
- Unify fragmented and full page allocation APIs in page pool code.
Let drivers be ignorant of PAGE_SIZE.
- Rework PHY state machine to avoid races with calls to phy_stop().
- Notify DSA drivers of MAC address changes on user ports, improve
correctness of offloads which depend on matching port MAC
addresses.
- Allow antenna control on injected WiFi frames.
- Reduce the number of variants of napi_schedule().
- Simplify error handling when composing devlink health messages.
Misc:
- A lot of KCSAN data race "fixes", from Eric.
- A lot of __counted_by() annotations, from Kees.
- A lot of strncpy -> strscpy and printf format fixes.
- Replace master/slave terminology with conduit/user in DSA drivers.
- Handful of KUnit tests for netdev and WiFi core.
Removed:
- AppleTalk COPS.
- AppleTalk ipddp.
- TI AR7 CPMAC Ethernet driver.
Drivers:
- Ethernet high-speed NICs:
- Intel (100G, ice, idpf):
- add a driver for the Intel E2000 IPUs
- make CRC/FCS stripping configurable
- cross-timestamping for E823 devices
- basic support for E830 devices
- use aux-bus for managing client drivers
- i40e: report firmware versions via devlink
- nVidia/Mellanox:
- support 4-port NICs
- increase max number of channels to 256
- optimize / parallelize SF creation flow
- Broadcom (bnxt):
- enhance NIC temperature reporting
- support PAM4 speeds and lane configuration
- Marvell OcteonTX2:
- PTP pulse-per-second output support
- enable hardware timestamping for VFs
- Solarflare/AMD:
- conntrack NAT offload and offload for tunnels
- Wangxun (ngbe/txgbe):
- expose HW statistics
- Pensando/AMD:
- support PCI level reset
- narrow down the condition under which skbs are linearized
- Netronome/Corigine (nfp):
- support CHACHA20-POLY1305 crypto in IPsec offload
- Ethernet NICs embedded, slower, virtual:
- Synopsys (stmmac):
- add Loongson-1 SoC support
- enable use of HW queues with no offload capabilities
- enable PPS input support on all 5 channels
- increase TX coalesce timer to 5ms
- RealTek USB (r8152): improve efficiency of Rx by using GRO frags
- xen: support SW packet timestamping
- add drivers for implementations based on TI's PRUSS (AM64x EVM)
- nVidia/Mellanox Ethernet datacenter switches:
- avoid poor HW resource use on Spectrum-4 by better block
selection for IPv6 multicast forwarding and ordering of blocks
in ACL region
- Ethernet embedded switches:
- Microchip:
- support configuring the drive strength for EMI compliance
- ksz9477: partial ACL support
- ksz9477: HSR offload
- ksz9477: Wake on LAN
- Realtek:
- rtl8366rb: respect device tree config of the CPU port
- Ethernet PHYs:
- support Broadcom BCM5221 PHYs
- TI dp83867: support hardware LED blinking
- CAN:
- add support for Linux-PHY based CAN transceivers
- at91_can: clean up and use rx-offload helpers
- WiFi:
- MediaTek (mt76):
- new sub-driver for mt7925 USB/PCIe devices
- HW wireless <> Ethernet bridging in MT7988 chips
- mt7603/mt7628 stability improvements
- Qualcomm (ath12k):
- WCN7850:
- enable 320 MHz channels in 6 GHz band
- hardware rfkill support
- enable IEEE80211_HW_SINGLE_SCAN_ON_ALL_BANDS to
make scan faster
- read board data variant name from SMBIOS
- QCN9274: mesh support
- RealTek (rtw89):
- TDMA-based multi-channel concurrency (MCC)
- Silicon Labs (wfx):
- Remain-On-Channel (ROC) support
- Bluetooth:
- ISO: many improvements for broadcast support
- mark BCM4378/BCM4387 as BROKEN_LE_CODED
- add support for QCA2066
- btmtksdio: enable Bluetooth wakeup from suspend"
* tag 'net-next-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1816 commits)
net: pcs: xpcs: Add 2500BASE-X case in get state for XPCS drivers
net: bpf: Use sockopt_lock_sock() in ip_sock_set_tos()
net: mana: Use xdp_set_features_flag instead of direct assignment
vxlan: Cleanup IFLA_VXLAN_PORT_RANGE entry in vxlan_get_size()
iavf: delete the iavf client interface
iavf: add a common function for undoing the interrupt scheme
iavf: use unregister_netdev
iavf: rely on netdev's own registered state
iavf: fix the waiting time for initial reset
iavf: in iavf_down, don't queue watchdog_task if comms failed
iavf: simplify mutex_trylock+sleep loops
iavf: fix comments about old bit locks
doc/netlink: Update schema to support cmd-cnt-name and cmd-max-name
tools: ynl: introduce option to process unknown attributes or types
ipvlan: properly track tx_errors
netdevsim: Block until all devices are released
nfp: using napi_build_skb() to replace build_skb()
net: dsa: microchip: ksz9477: Fix spelling mistake "Enery" -> "Energy"
net: dsa: microchip: Ensure Stable PME Pin State for Wake-on-LAN
net: dsa: microchip: Refactor switch shutdown routine for WoL preparation
...
Add the necessary structure to support custom private-data per
posix-clock user.
The previous implementation of posix-clock assumed all file open
instances need access to the same clock structure on private_data.
The need for individual data structures per file open instance has been
identified when developing support for multiple timestamp event queue
users for ptp_clock.
Signed-off-by: Xabier Marquiegui <reibax@gmail.com>
Suggested-by: Richard Cochran <richardcochran@gmail.com>
Suggested-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some userspace applications use timerfd_create() to request wakeups after
a long period of time. For example, a backup application may request a
wakeup once per week. This is perfectly fine as long as the system does
not try to suspend. However, if the system tries to suspend and the
system's RTC does not support the required alarm timeout, the suspend
operation will fail with an error such as
rtc_cmos 00:01: Alarms can be up to one day in the future
PM: dpm_run_callback(): platform_pm_suspend+0x0/0x4a returns -22
alarmtimer alarmtimer.4.auto: platform_pm_suspend+0x0/0x4a returned -22 after 117 usecs
PM: Device alarmtimer.4.auto failed to suspend: error -22
This results in a refusal to suspend the system, causing substantial
battery drain on affected systems.
To fix the problem, use the maximum alarm time offset as reported by RTC
drivers to set the maximum alarm time. While this may result in early
wakeups from suspend, it is still much better than not suspending at all.
Standardize system behavior if the requested alarm timeout is larger than
the alarm timeout supported by the rtc chip. Currently, in this situation,
the RTC driver will do one of the following:
- It may return an error.
- It may limit the alarm timeout to the maximum supported by the rtc chip.
- It may mask the timeout by the maximum alarm timeout supported by the RTC
chip (i.e. a requested timeout of 1 day + 1 minute may result in a 1
minute timeout).
With this in place, if the RTC driver reports the maximum alarm timeout
supported by the RTC chip, the system will always limit the alarm timeout
to the maximum supported by the RTC chip.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/r/20230915152238.1144706-3-linux@roeck-us.net
Inspired by recent enhancements to comments in kernel/time/tick-sched.c,
go through the entire file and fix/unify its comments:
- Fix over a dozen typos, spelling mistakes & cases of bad grammar.
- Re-phrase sentences that I needed to read three times to understand.
[ I used the following arbitrary rule-of-thumb:
- if I had to read a comment twice, it was usually my fault,
- if I had to read it a third time, it was the comment's fault. ]
- Comma updates:
- Add commas where needed
- Remove commas where not needed
- In cases where a comma is optional, choose one variant and try to
standardize it over similar sentences in the file.
- Standardize on standalone 'NOHZ' spelling in free-flowing comments:
s/nohz/NOHZ
s/no idle tick/NOHZ
Still keep 'dynticks' as a popular synonym.
- Standardize on referring to variable names within free-flowing
comments with the "'var'" nomenclature, and function names as
"function_name()".
- Standardize on '64-bit' and '32-bit':
s/32bit/32-bit
s/64bit/64-bit
- Standardize on 'IRQ work':
s/irq work/IRQ work
- A few other tidyups I probably missed to list.
No change in functionality intended - other than one small change to
a syslog output string.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/ZRVCNeMcSQcXS36N@gmail.com
In lowres dynticks mode, just like in highres dynticks mode, when there
is no tick to program in the future, the tick eventually gets
deactivated either:
* From the idle loop if in idle mode.
* From the IRQ exit if in full dynticks mode.
Therefore there is no need to deactivate it from the tick itself. This
just just brings more overhead in the idle tick path for no reason.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Link: https://lore.kernel.org/r/20230912104406.312185-4-frederic@kernel.org
Some comments are obsolete enough to assume that IRQ exit restarts the
tick in idle or RCU is turned on at the same time as the tick, among
other details.
Update them and add more.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230912104406.312185-3-frederic@kernel.org
The current names of the tick handlers don't tell much about what different
between them. Use names that better reflect their role and resolution.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230912104406.312185-2-frederic@kernel.org
kernels, caused by a buggy factoring-out of existing code.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=zpfn
-----END PGP SIGNATURE-----
Merge tag 'timers-urgent-2023-09-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Ingo Molnar:
"Fix false positive 'softirq work is pending' messages on -rt kernels,
caused by a buggy factoring-out of existing code"
* tag 'timers-urgent-2023-09-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tick/rcu: Fix false positive "softirq work is pending" messages
- Work from Carlos Bilbao to integrate rustdoc output into the generated
HTML documentation. This took some work to figure out how to do it
without slowing the docs build and without creating people who don't have
Rust installed, but Carlos got there.
- Move the loongarch and mips architecture documentation under
Documentation/arch/.
- Some more maintainer documentation from Jakub
...plus the usual assortment of updates, translations, and fixes.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmTvqNkPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YgIgH/3drfLtlFtzLqDOzrzDXS8yGnE3pPdxw796b
/ZFzAK16wYKaKevYoIz8bVGGKaE1sEUW0mhlq4KGdfZuxLG8YnWS8URyCW4FDU2E
6qNL+8oJ8LZfID46f9Q8ZgfEz7yF/mhCqPk7MEswYtwbscs2ZTGCTGYB/5BHlBuT
LR+M89uLmHgr8S1o24v30OgiX+VvQFyu0xoxIhbiqUZvBd/XdfX2pgYd9BGzMj5q
C2ZP+V14g36c5pV0EO9TwhCXOF/WVrp7DbjbfWAsqBSLxvpXPydH2q1DUzGeQtP1
exujrBD1O8q3pPdaNA5R+h6cWlHmUZug9mE4BRLp9ErGrozwJsQ=
=C3Uv
-----END PGP SIGNATURE-----
Merge tag 'docs-6.6' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"Documentation work keeps chugging along; this includes:
- Work from Carlos Bilbao to integrate rustdoc output into the
generated HTML documentation. This took some work to figure out how
to do it without slowing the docs build and without creating people
who don't have Rust installed, but Carlos got there
- Move the loongarch and mips architecture documentation under
Documentation/arch/
- Some more maintainer documentation from Jakub
... plus the usual assortment of updates, translations, and fixes"
* tag 'docs-6.6' of git://git.lwn.net/linux: (56 commits)
Docu: genericirq.rst: fix irq-example
input: docs: pxrc: remove reference to phoenix-sim
Documentation: serial-console: Fix literal block marker
docs/mm: remove references to hmm_mirror ops and clean typos
docs/zh_CN: correct regi_chg(),regi_add() to region_chg(),region_add()
Documentation: Fix typos
Documentation/ABI: Fix typos
scripts: kernel-doc: fix macro handling in enums
scripts: kernel-doc: parse DEFINE_DMA_UNMAP_[ADDR|LEN]
Documentation: riscv: Update boot image header since EFI stub is supported
Documentation: riscv: Add early boot document
Documentation: arm: Add bootargs to the table of added DT parameters
docs: kernel-parameters: Refer to the correct bitmap function
doc: update params of memhp_default_state=
docs: Add book to process/kernel-docs.rst
docs: sparse: fix invalid link addresses
docs: vfs: clean up after the iterate() removal
docs: Add a section on surveys to the researcher guidelines
docs: move mips under arch
docs: move loongarch under arch
...
In commit 0345691b24 ("tick/rcu: Stop allowing RCU_SOFTIRQ in idle") the
new function report_idle_softirq() was created by breaking code out of the
existing can_stop_idle_tick() for kernels v5.18 and newer.
In doing so, the code essentially went from a one conditional:
if (a && b && c)
warn();
to a three conditional:
if (!a)
return;
if (!b)
return;
if (!c)
return;
warn();
But that conversion got the condition for the RT specific
local_bh_blocked() wrong. The original condition was:
!local_bh_blocked()
but the conversion failed to negate it so it ended up as:
if (!local_bh_blocked())
return false;
This issue lay dormant until another fixup for the same commit was added
in commit a7e282c777 ("tick/rcu: Fix bogus ratelimit condition").
This commit realized the ratelimit was essentially set to zero instead
of ten, and hence *no* softirq pending messages would ever be issued.
Once this commit was backported via linux-stable, both the v6.1 and v6.4
preempt-rt kernels started printing out 10 instances of this at boot:
NOHZ tick-stop error: local softirq work is pending, handler #80!!!
Remove the negation and return when local_bh_blocked() evaluates to true to
bring the correct behaviour back.
Fixes: 0345691b24 ("tick/rcu: Stop allowing RCU_SOFTIRQ in idle")
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Reviewed-by: Wen Yang <wenyang.linux@foxmail.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230818200757.1808398-1-paul.gortmaker@windriver.com
This kunit update for Linux 6.6.rc1 consists of:
-- Adds support for running Rust documentation tests as KUnit tests
-- Makes init, str, sync, types doctests compilable/testable
-- Adds support for attributes API which include speed, modules
attributes, ability to filter and report attributes.
-- Adds support for marking tests slow using attributes API.
-- Adds attributes API documentation
-- Fixes to wild-memory-access bug in kunit_filter_suites() and
a possible memory leak in kunit_filter_suites()
-- Adds support for counting number of test suites in a module, list
action to kunit test modules, and test filtering on module tests.
-----BEGIN PGP SIGNATURE-----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=Nsb8
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-kunit-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit updates from Shuah Khan:
- add support for running Rust documentation tests as KUnit tests
- make init, str, sync, types doctests compilable/testable
- add support for attributes API which include speed, modules
attributes, ability to filter and report attributes
- add support for marking tests slow using attributes API
- add attributes API documentation
- fix a wild-memory-access bug in kunit_filter_suites() and a possible
memory leak in kunit_filter_suites()
- add support for counting number of test suites in a module, list
action to kunit test modules, and test filtering on module tests
* tag 'linux-kselftest-kunit-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (25 commits)
kunit: fix struct kunit_attr header
kunit: replace KUNIT_TRIGGER_STATIC_STUB maro with KUNIT_STATIC_STUB_REDIRECT
kunit: Allow kunit test modules to use test filtering
kunit: Make 'list' action available to kunit test modules
kunit: Report the count of test suites in a module
kunit: fix uninitialized variables bug in attributes filtering
kunit: fix possible memory leak in kunit_filter_suites()
kunit: fix wild-memory-access bug in kunit_filter_suites()
kunit: Add documentation of KUnit test attributes
kunit: add tests for filtering attributes
kunit: time: Mark test as slow using test attributes
kunit: memcpy: Mark tests as slow using test attributes
kunit: tool: Add command line interface to filter and report attributes
kunit: Add ability to filter attributes
kunit: Add module attribute
kunit: Add speed attribute
kunit: Add test attributes API structure
MAINTAINERS: add Rust KUnit files to the KUnit entry
rust: support running Rust documentation tests as KUnit ones
rust: types: make doctests compilable/testable
...
Mark the time KUnit test, time64_to_tm_test_date_range, as slow using test
attributes.
This test ran relatively much slower than most other KUnit tests.
By marking this test as slow, the test can now be filtered using the KUnit
test attribute filtering feature. Example: --filter "speed>slow". This will
run only the tests that have speeds faster than slow. The slow attribute
will also be outputted in KTAP.
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Rae Moar <rmoar@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The nanosecond-to-millisecond skew computation uses unsigned arithmetic,
which produces user-unfriendly large positive numbers for negative skews.
Therefore, use signed arithmetic for this computation in order to preserve
the negativity.
Reported-by: Chris Bainbridge <chris.bainbridge@gmail.com>
Reported-by: Feng Tang <feng.tang@intel.com>
Fixes: dd02926994 ("clocksource: Improve "skew is too large" messages")
Reviewed-by: Feng Tang <feng.tang@intel.com>
Tested-by: Chris Bainbridge <chris.bainbridge@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Add kernel-doc for all APIs that do not already have it.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: John Stultz <jstultz@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Acked-by: John Stultz <jstultz@google.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20230704052405.5089-3-rdunlap@infradead.org
- Fix KMSAN vs FORTIFY in strlcpy/strlcat (Alexander Potapenko)
- Convert strreplace() to return string start (Andy Shevchenko)
- Flexible array conversions (Arnd Bergmann, Wyes Karny, Kees Cook)
- Add missing function prototypes seen with W=1 (Arnd Bergmann)
- Fix strscpy() kerndoc typo (Arne Welzel)
- Replace strlcpy() with strscpy() across many subsystems which were
either Acked by respective maintainers or were trivial changes that
went ignored for multiple weeks (Azeem Shaikh)
- Remove unneeded cc-option test for UBSAN_TRAP (Nick Desaulniers)
- Add KUnit tests for strcat()-family
- Enable KUnit tests of FORTIFY wrappers under UML
- Add more complete FORTIFY protections for strlcat()
- Add missed disabling of FORTIFY for all arch purgatories.
- Enable -fstrict-flex-arrays=3 globally
- Tightening UBSAN_BOUNDS when using GCC
- Improve checkpatch to check for strcpy, strncpy, and fake flex arrays
- Improve use of const variables in FORTIFY
- Add requested struct_size_t() helper for types not pointers
- Add __counted_by macro for annotating flexible array size members
-----BEGIN PGP SIGNATURE-----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=s0j1
-----END PGP SIGNATURE-----
Merge tag 'hardening-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
"There are three areas of note:
A bunch of strlcpy()->strscpy() conversions ended up living in my tree
since they were either Acked by maintainers for me to carry, or got
ignored for multiple weeks (and were trivial changes).
The compiler option '-fstrict-flex-arrays=3' has been enabled
globally, and has been in -next for the entire devel cycle. This
changes compiler diagnostics (though mainly just -Warray-bounds which
is disabled) and potential UBSAN_BOUNDS and FORTIFY _warning_
coverage. In other words, there are no new restrictions, just
potentially new warnings. Any new FORTIFY warnings we've seen have
been fixed (usually in their respective subsystem trees). For more
details, see commit df8fc4e934.
The under-development compiler attribute __counted_by has been added
so that we can start annotating flexible array members with their
associated structure member that tracks the count of flexible array
elements at run-time. It is possible (likely?) that the exact syntax
of the attribute will change before it is finalized, but GCC and Clang
are working together to sort it out. Any changes can be made to the
macro while we continue to add annotations.
As an example of that last case, I have a treewide commit waiting with
such annotations found via Coccinelle:
https://git.kernel.org/linus/adc5b3cb48a049563dc673f348eab7b6beba8a9b
Also see commit dd06e72e68 for more details.
Summary:
- Fix KMSAN vs FORTIFY in strlcpy/strlcat (Alexander Potapenko)
- Convert strreplace() to return string start (Andy Shevchenko)
- Flexible array conversions (Arnd Bergmann, Wyes Karny, Kees Cook)
- Add missing function prototypes seen with W=1 (Arnd Bergmann)
- Fix strscpy() kerndoc typo (Arne Welzel)
- Replace strlcpy() with strscpy() across many subsystems which were
either Acked by respective maintainers or were trivial changes that
went ignored for multiple weeks (Azeem Shaikh)
- Remove unneeded cc-option test for UBSAN_TRAP (Nick Desaulniers)
- Add KUnit tests for strcat()-family
- Enable KUnit tests of FORTIFY wrappers under UML
- Add more complete FORTIFY protections for strlcat()
- Add missed disabling of FORTIFY for all arch purgatories.
- Enable -fstrict-flex-arrays=3 globally
- Tightening UBSAN_BOUNDS when using GCC
- Improve checkpatch to check for strcpy, strncpy, and fake flex
arrays
- Improve use of const variables in FORTIFY
- Add requested struct_size_t() helper for types not pointers
- Add __counted_by macro for annotating flexible array size members"
* tag 'hardening-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (54 commits)
netfilter: ipset: Replace strlcpy with strscpy
uml: Replace strlcpy with strscpy
um: Use HOST_DIR for mrproper
kallsyms: Replace all non-returning strlcpy with strscpy
sh: Replace all non-returning strlcpy with strscpy
of/flattree: Replace all non-returning strlcpy with strscpy
sparc64: Replace all non-returning strlcpy with strscpy
Hexagon: Replace all non-returning strlcpy with strscpy
kobject: Use return value of strreplace()
lib/string_helpers: Change returned value of the strreplace()
jbd2: Avoid printing outside the boundary of the buffer
checkpatch: Check for 0-length and 1-element arrays
riscv/purgatory: Do not use fortified string functions
s390/purgatory: Do not use fortified string functions
x86/purgatory: Do not use fortified string functions
acpi: Replace struct acpi_table_slit 1-element array with flex-array
clocksource: Replace all non-returning strlcpy with strscpy
string: use __builtin_memcpy() in strlcpy/strlcat
staging: most: Replace all non-returning strlcpy with strscpy
drm/i2c: tda998x: Replace all non-returning strlcpy with strscpy
...
- Scheduler SMP load-balancer improvements:
- Avoid unnecessary migrations within SMT domains on hybrid systems.
Problem:
On hybrid CPU systems, (processors with a mixture of higher-frequency
SMT cores and lower-frequency non-SMT cores), under the old code
lower-priority CPUs pulled tasks from the higher-priority cores if
more than one SMT sibling was busy - resulting in many unnecessary
task migrations.
Solution:
The new code improves the load balancer to recognize SMT cores with more
than one busy sibling and allows lower-priority CPUs to pull tasks, which
avoids superfluous migrations and lets lower-priority cores inspect all SMT
siblings for the busiest queue.
- Implement the 'runnable boosting' feature in the EAS balancer: consider CPU
contention in frequency, EAS max util & load-balance busiest CPU selection.
This improves CPU utilization for certain workloads, while leaves other key
workloads unchanged.
- Scheduler infrastructure improvements:
- Rewrite the scheduler topology setup code by consolidating it
into the build_sched_topology() helper function and building
it dynamically on the fly.
- Resolve the local_clock() vs. noinstr complications by rewriting
the code: provide separate sched_clock_noinstr() and
local_clock_noinstr() functions to be used in instrumentation code,
and make sure it is all instrumentation-safe.
- Fixes:
- Fix a kthread_park() race with wait_woken()
- Fix misc wait_task_inactive() bugs unearthed by the -rt merge:
- Fix UP PREEMPT bug by unifying the SMP and UP implementations.
- Fix task_struct::saved_state handling.
- Fix various rq clock update bugs, unearthed by turning on the rq clock
debugging code.
- Fix the PSI WINDOW_MIN_US trigger limit, which was easy to trigger by
creating enough cgroups, by removing the warnign and restricting
window size triggers to PSI file write-permission or CAP_SYS_RESOURCE.
- Propagate SMT flags in the topology when removing degenerate domain
- Fix grub_reclaim() calculation bug in the deadline scheduler code
- Avoid resetting the min update period when it is unnecessary, in
psi_trigger_destroy().
- Don't balance a task to its current running CPU in load_balance(),
which was possible on certain NUMA topologies with overlapping
groups.
- Fix the sched-debug printing of rq->nr_uninterruptible
- Cleanups:
- Address various -Wmissing-prototype warnings, as a preparation
to (maybe) enable this warning in the future.
- Remove unused code
- Mark more functions __init
- Fix shadow-variable warnings
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=EWQA
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2023-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Scheduler SMP load-balancer improvements:
- Avoid unnecessary migrations within SMT domains on hybrid systems.
Problem:
On hybrid CPU systems, (processors with a mixture of
higher-frequency SMT cores and lower-frequency non-SMT cores),
under the old code lower-priority CPUs pulled tasks from the
higher-priority cores if more than one SMT sibling was busy -
resulting in many unnecessary task migrations.
Solution:
The new code improves the load balancer to recognize SMT cores
with more than one busy sibling and allows lower-priority CPUs
to pull tasks, which avoids superfluous migrations and lets
lower-priority cores inspect all SMT siblings for the busiest
queue.
- Implement the 'runnable boosting' feature in the EAS balancer:
consider CPU contention in frequency, EAS max util & load-balance
busiest CPU selection.
This improves CPU utilization for certain workloads, while leaves
other key workloads unchanged.
Scheduler infrastructure improvements:
- Rewrite the scheduler topology setup code by consolidating it into
the build_sched_topology() helper function and building it
dynamically on the fly.
- Resolve the local_clock() vs. noinstr complications by rewriting
the code: provide separate sched_clock_noinstr() and
local_clock_noinstr() functions to be used in instrumentation code,
and make sure it is all instrumentation-safe.
Fixes:
- Fix a kthread_park() race with wait_woken()
- Fix misc wait_task_inactive() bugs unearthed by the -rt merge:
- Fix UP PREEMPT bug by unifying the SMP and UP implementations
- Fix task_struct::saved_state handling
- Fix various rq clock update bugs, unearthed by turning on the rq
clock debugging code.
- Fix the PSI WINDOW_MIN_US trigger limit, which was easy to trigger
by creating enough cgroups, by removing the warnign and restricting
window size triggers to PSI file write-permission or
CAP_SYS_RESOURCE.
- Propagate SMT flags in the topology when removing degenerate domain
- Fix grub_reclaim() calculation bug in the deadline scheduler code
- Avoid resetting the min update period when it is unnecessary, in
psi_trigger_destroy().
- Don't balance a task to its current running CPU in load_balance(),
which was possible on certain NUMA topologies with overlapping
groups.
- Fix the sched-debug printing of rq->nr_uninterruptible
Cleanups:
- Address various -Wmissing-prototype warnings, as a preparation to
(maybe) enable this warning in the future.
- Remove unused code
- Mark more functions __init
- Fix shadow-variable warnings"
* tag 'sched-core-2023-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (50 commits)
sched/core: Avoid multiple calling update_rq_clock() in __cfsb_csd_unthrottle()
sched/core: Avoid double calling update_rq_clock() in __balance_push_cpu_stop()
sched/core: Fixed missing rq clock update before calling set_rq_offline()
sched/deadline: Update GRUB description in the documentation
sched/deadline: Fix bandwidth reclaim equation in GRUB
sched/wait: Fix a kthread_park race with wait_woken()
sched/topology: Mark set_sched_topology() __init
sched/fair: Rename variable cpu_util eff_util
arm64/arch_timer: Fix MMIO byteswap
sched/fair, cpufreq: Introduce 'runnable boosting'
sched/fair: Refactor CPU utilization functions
cpuidle: Use local_clock_noinstr()
sched/clock: Provide local_clock_noinstr()
x86/tsc: Provide sched_clock_noinstr()
clocksource: hyper-v: Provide noinstr sched_clock()
clocksource: hyper-v: Adjust hv_read_tsc_page_tsc() to avoid special casing U64_MAX
x86/vdso: Fix gettimeofday masking
math64: Always inline u128 version of mul_u64_u64_shr()
s390/time: Provide sched_clock_noinstr()
loongarch: Provide noinstr sched_clock_read()
...
- Core:
- A set of fixes, cleanups and enhancements to the posix timer code:
- Prevent another possible live lock scenario in the exit() path,
which affects POSIX_CPU_TIMERS_TASK_WORK enabled architectures.
- Fix a loop termination issue which was reported syzcaller/KSAN in
the posix timer ID allocation code.
That triggered a deeper look into the posix-timer code which
unearthed more small issues.
- Add missing READ/WRITE_ONCE() annotations
- Fix or remove completely outdated comments
- Document places which are subtle and completely undocumented.
- Add missing hrtimer modes to the trace event decoder
- Small cleanups and enhancements all over the place
- Drivers:
- Rework the Hyper-V clocksource and sched clock setup code
- Remove a deprecated clocksource driver
- Small fixes and enhancements all over the place
-----BEGIN PGP SIGNATURE-----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=hRV9
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"Time, timekeeping and related device driver updates:
Core:
- A set of fixes, cleanups and enhancements to the posix timer code:
- Prevent another possible live lock scenario in the exit() path,
which affects POSIX_CPU_TIMERS_TASK_WORK enabled architectures.
- Fix a loop termination issue which was reported syzcaller/KSAN
in the posix timer ID allocation code.
That triggered a deeper look into the posix-timer code which
unearthed more small issues.
- Add missing READ/WRITE_ONCE() annotations
- Fix or remove completely outdated comments
- Document places which are subtle and completely undocumented.
- Add missing hrtimer modes to the trace event decoder
- Small cleanups and enhancements all over the place
Drivers:
- Rework the Hyper-V clocksource and sched clock setup code
- Remove a deprecated clocksource driver
- Small fixes and enhancements all over the place"
* tag 'timers-core-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip: (39 commits)
clocksource/drivers/cadence-ttc: Fix memory leak in ttc_timer_probe
dt-bindings: timers: Add Ralink SoCs timer
clocksource/drivers/hyper-v: Rework clocksource and sched clock setup
dt-bindings: timer: brcm,kona-timer: convert to YAML
clocksource/drivers/imx-gpt: Fold <soc/imx/timer.h> into its only user
clk: imx: Drop inclusion of unused header <soc/imx/timer.h>
hrtimer: Add missing sparse annotations to hrtimer locking
clocksource/drivers/imx-gpt: Use only a single name for functions
clocksource/drivers/loongson1: Move PWM timer to clocksource framework
dt-bindings: timer: Add Loongson-1 clocksource
MIPS: Loongson32: Remove deprecated PWM timer clocksource
clocksource/drivers/ingenic-timer: Use pm_sleep_ptr() macro
tracing/timer: Add missing hrtimer modes to decode_hrtimer_mode().
posix-timers: Add sys_ni_posix_timers() prototype
tick/rcu: Fix bogus ratelimit condition
alarmtimer: Remove unnecessary (void *) cast
alarmtimer: Remove unnecessary initialization of variable 'ret'
posix-timers: Refer properly to CONFIG_HIGH_RES_TIMERS
posix-timers: Polish coding style in a few places
posix-timers: Remove pointless comments
...
Sparse warns about lock imbalance vs. the hrtimer_base lock due to missing
sparse annotations:
kernel/time/hrtimer.c:175:33: warning: context imbalance in 'lock_hrtimer_base' - wrong count at exit
kernel/time/hrtimer.c:1301:28: warning: context imbalance in 'hrtimer_start_range_ns' - unexpected unlock
kernel/time/hrtimer.c:1336:28: warning: context imbalance in 'hrtimer_try_to_cancel' - unexpected unlock
kernel/time/hrtimer.c:1457:9: warning: context imbalance in '__hrtimer_get_remaining' - unexpected unlock
Add the annotations to the relevant functions.
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230621075928.394481-1-ben.dooks@codethink.co.uk
The ratelimit logic in report_idle_softirq() is broken because the
exit condition is always true:
static int ratelimit;
if (ratelimit < 10)
return false; ---> always returns here
ratelimit++; ---> no chance to run
Make it check for >= 10 instead.
Fixes: 0345691b24 ("tick/rcu: Stop allowing RCU_SOFTIRQ in idle")
Signed-off-by: Wen Yang <wenyang.linux@foxmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/tencent_5AAA3EEAB42095C9B7740BE62FBF9A67E007@qq.com
Commit c78f261e5dcb ("posix-timers: Clarify posix_timer_fn() comments")
turns an ifdef CONFIG_HIGH_RES_TIMERS into an conditional on
"IS_ENABLED(CONFIG_HIGHRES_TIMERS)"; note that the new conditional refers
to "HIGHRES_TIMERS" not "HIGH_RES_TIMERS" as before.
Fix this typo introduced in that refactoring.
Fixes: c78f261e5dcb ("posix-timers: Clarify posix_timer_fn() comments")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230609094643.26253-1-lukas.bulwahn@gmail.com
Make the issues vs. SIG_IGN understandable and remove the 15 years old
promise that a proper solution is already on the horizon.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/874jnrdmrq.ffs@tglx
The comment about timer lifetime at the end of the function is misplaced
and uncomprehensible.
Make it understandable and put it at the right place. Add a new comment
about the visibility of the new timer ID to user space.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230425183313.619897296@linutronix.de
The descriptions for common_nsleep() is wrong and common_nsleep_timens()
lacks any form of comment.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230425183313.567072835@linutronix.de
The documentation of sys_clock_settime() permissions is at a random place
and mostly word salad.
Remove it and add a concise comment into sys_clock_settime().
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230425183313.514700292@linutronix.de
The decades old comment about Posix clock resolution is confusing at best.
Remove it and add a proper explanation to sys_clock_getres().
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230425183313.356427330@linutronix.de
