make htmldocs warns:
Documentation/driver-api/80211/cfg80211:48: ./include/net/cfg80211.h:7290: WARNING: Duplicate C declaration, also defined at cfg80211:7251.
Declaration is '.. c:function:: void cfg80211_rx_assoc_resp (struct net_device *dev, struct cfg80211_rx_assoc_resp *data)'.
This is because there's a function named cfg80211_rx_assoc_resp() and a struct
named cfg80211_rx_assoc_resp, see previous patch for more info.
To workaround this rename the struct to cfg80211_rx_assoc_resp_data. The
parameter for the function is named 'data' anyway so the naming here is
consistent.
Compile tested only.
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231012114229.2931808-3-kvalo@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
make htmldocs warns:
Documentation/driver-api/80211/mac80211:109: ./include/net/mac80211.h:5170: WARNING: Duplicate C declaration, also defined at mac80211:1117.
Declaration is '.. c:function:: void ieee80211_tx_status (struct ieee80211_hw *hw, struct sk_buff *skb)'.
This is because there's a function named ieee80211_tx_status() and a struct named
ieee80211_tx_status. This has been discussed previously but no solution found:
https://lore.kernel.org/all/20220521114629.6ee9fc06@coco.lan/
There's also a bug open for three years with no solution in sight:
https://github.com/sphinx-doc/sphinx/pull/8313
So I guess we have no other solution than to a workaround this in the code,
for example to rename the function to ieee80211_tx_status_skb() to avoid the
name conflict. I got the idea for the name from ieee80211_tx_status_noskb() in
which the skb is not provided as an argument, instead with
ieee80211_tx_status_skb() the skb is provided.
Compile tested only.
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231012114229.2931808-2-kvalo@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There is a requirement from OEMs to support a new bit in DSM function 8,
which will indicate that this device is an indoor one, and that it
should activate UNII-1 (5.2GHz) sub band in the World Wide Geo Profile.
Add support for this by reading this bit from BIOS and sending it to the
FW.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231011130030.86d4ad178042.Ief40acc08b5482ff147fd17e74e36f1933e43def@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When we remove TDLS stations, we need to remove them from FW
immediately, even while associated. Some previous refactoring
here lost the sta ID condition, add it back.
Fixes: 57974a55d9 ("wifi: iwlwifi: mvm: refactor iwl_mvm_mac_sta_state_common()")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231011130030.933011e710a9.I77c069c781e8b2b698b86cc3f43fc3c7e2dde114@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When I implemented iwl_mvm_mac_flush_sta() I completely botched it;
it basically always happens after the iwl_mvm_sta_pre_rcu_remove()
call, and that already clears mvm->fw_id_to_mac_id[] entries, so we
cannot rely on those at iwl_mvm_mac_flush_sta() time. This means it
never did anything.
Fix this by just going through the station IDs and now with the new
API for iwl_mvm_flush_sta(), call those.
Fixes: a6cc6ccb1c ("wifi: iwlwifi: mvm: support new flush_sta method")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231011130030.0b5878e93118.I1093e60163052e7be64d2b01424097cd6a272979@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This API is type unsafe and needs an extra parameter to know
what kind of station was passed, so it has two, but really it
only needs two values. Just pass the values instead of doing
this type-unsafe dance, which will also make it better to use
for multi-link.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231011130030.aeb3bf4204cd.I5b0e6d64a67455784bc8fbdaf9ceaf03699d9ce1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We seem to have an issue in case we had a BSS and a P2P device on
channel 1 and then, the P2P device gets an ROC on channel 6. We would
change the channel of the PHY context to channel 6 even if the BSS was
using that same PHY context.
Revamp that code and don't try to change a PHY context, it doesn't mean
much for the firmware anyway. Just remove it and allocate a new one.
This makes the logic easier to follow.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231011130030.4bc8b90d7be0.I1232dca3fe007362ec0ae0cf1d96217f2544e0d2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When we want to add a phy_ctxt, we need to increase the ref.
Note that all the WARN_ONs are already in place:
* We check that we don't add a context with ref != 0
* We check that we don't modify a context with ref = 0
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231011130030.c19c07746b26.I5b0cbe0760811631a320218a10b88870b5bf0897@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
From its very first stages of development, iwlmvm added all the PHY
context immediately upon firmware boot. Then, all we needed to do is to
modify the contexts. This was fine if the addition of a PHY context that
we don't need is free. This was true until now. Newer devices will run
calibrations upon the addition of a PHY context.
Change the way we work with PHY context in iwlmvm. Fortunately, we
already have all the ref counting in place so that it is not very hard
to do.
Also, since we now remove the PHY context before the link is removed
(but after it has been de-activated of course), it'll confuse the
firmware if we put the late phy_id into the LINK command that removes
the link. Change this to put an invalid phy_id just like we do when we
add a link that has no PHY context yet.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231011130030.55a1a78719be.I2032a7d227b57f4fc4370a2793476d47538404fd@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
bss_info_changed() callback of mac80211 was originally in both
MLD and non-MLD API. Therefore, we extracted the common part
to a function which receives a callback structure with the
mode-specific (non-MLO\MLO) ops. Eventually, for MLO API,
bss_info_changed() callback was split into 2 callbacks:
link_info_changed() and vif_cfg_changed() so it is no longer in use
for MLO, only for non-MLO.
Remove the code that uses the mode-specific callback structure.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231011130030.b65fbcdb9295.I2a64a6f1178ee0466755d728addc77acbb2ed6f4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Read the EDT (Energy detection threshold) optimization configuration
table from BIOS using DSM Function and send it to FW.
Signed-off-by: Alon Giladi <alon.giladi@intel.com>
Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231011130030.0b78ee48219a.I8ecbd39d258e2ee0514a7e28632f6c18fb798a83@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When an IGTK is installed for an AP interface, there is no station
associated with it. However, the MFP flag must be set for the installed
key as otherwise the FW wouldn't use it.
Fix the security key flag to set the MFP flag also when the AP is
an AP interface and the key index matches that of an IGTK.
Fixes: 5c75a208c2 ("wifi: iwlwifi: mvm: support new key API")
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231011130030.f67005e2d4d2.I6832c6e87f3c79fff00689eb10a3a30810e1ee83@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In reality 64 bytes are enough to hold fw version string,
but some compilers can complain (with W=1) that output may be
truncated when building this string with snprintf.
Increase the size to avoid this sort of warnings and state
explicitely that we want the size to be trancated to 32 bytes.
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Tested-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231012153950.f4465b4b4e2b.Idced2e8d63c492872edcde1a3ce2cdd6cc0f8eb7@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When using e.g. bonding, and doing a sequence such as
# iw wlan0 set type __ap
# ip link add name bond1 type bond
# ip link set wlan0 master bond1
# iw wlan0 interface del
we deadlock, since the wlan0 interface removal will cause
bonding to reset the MAC address of wlan0.
The locking would be somewhat difficult to fix, but since
this only happens during removal, we can simply ignore the
MAC address change at this time.
Reported-by: syzbot+25b3a0b24216651bc2af@syzkaller.appspotmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20231012123447.9f9d7fd1f237.Ic3a5ef4391b670941a69cec5592aefc79d9c2890@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time via CONFIG_UBSAN_BOUNDS (for
array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
While there, use struct_size() helper, instead of the open-coded
version, to calculate the size for the allocation of the whole
flexible structure including, of course, the flexible-array member.
This code was found with the help of Coccinelle, and audited and
fixed manually.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/ZSQ/jcmTAf/PKHg/@work
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In 'iwl_parse_tlv_firmware()', check for 'kmemdup()' return value
when handling IWL_UCODE_TLV_CURRENT_PC and set the number of parsed
entries only if an allocation was successful (just like it does with
handling IWL_UCODE_TLV_CMD_VERSIONS above). Compile tested only.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231009170453.149905-1-dmantipov@yandex.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In case the link puncturing is changed such that the channel
is no longer punctured, configure the FW correctly indicating
the EHT parameters changed (with a 0 punctured map).
Allow EHT parameters configuration only when the link really
supports EHT.
Fixes: 55eb1c5fa4 ("wifi: iwlwifi: mvm: add support for the new LINK command")
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231004123422.2666ef86e032.I4b0e95722660acc5345ceefba7e8866a69572e8e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
During debugfs command handling transport function is used directly,
this bypasses the locking used by runtime operation function
and leads to a kernel warning when two commands are
sent in parallel.
Fix it by using runtime operations function when sending
debugfs command.
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231004123422.4f80ac90658a.Ia1dfa1195c919f3002fe08db3eefbd2bfa921bbf@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This doesn't require any special implementation from our device, just
allows transmission of SCS request frame containing a QoS
characteristics sub element.
Signed-off-by: Ayala Beker <ayala.beker@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231004123422.cc15de23b07b.I35fa1fbacf113b87ba7a13c37760f893eb57643a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
It is not necessary to keep the P2P Device bound/linked to a PHY
context when there is no active ROC.
Modify the P2P Device flows so the binding/linking would be done
only while ROC is active. With this change the switch_phy_ctxt()
is no longer needed so remove it.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231004123422.c5b83b4bf9de.Ia80daf3ba0b5fec7d0919247fcbdbdb58bddf02b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
mac_ctdp_sum contains the power consumption, appears in power save
report, and is used for debugging and collection of statistics.
Add a debugfs handler to start this calculation, iff ctdp
command is supported in the firmware.
While on it, add an option to force start/stop this calculation,
which is safe from the firmware API side.
Signed-off-by: iallouch <itai.allouche@intel.com>
Signed-off-by: Nitsan Bar <nitsan.bar@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231004123422.024d75df9e03.I69fdc826f2931a6e1435b450f0602ea060704697@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In RFKILL we first set the RFKILL bit, then we abort scan
(if one exists) by waiting for the notification from FW
and notifying mac80211. And then we stop the device.
But in case we have a scan ongoing in the period of time between
rfkill on and before the device is stopped - we will not wait for the
FW notification because of the iwl_mvm_is_radio_killed() condition,
and then the scan_status and uid_status are misconfigured,
(scan_status is cleared but uid_status not)
and when the notification suddenly arrives (before stopping the device)
we will get into the assert about scan_status and uid_status mismatch.
Fix this by waiting for FW notif when rfkill is on but the device isn't
disabled yet.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231004123422.c43b69aa2c77.Icc7b5efb47974d6f499156ff7510b786e177993b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add simple logic that would allow using EMLSR in case
there are multiple valid links:
- In case the connection establishment has just been
completed try to find a valid link pair for EMLSR
functionality where one of the links in the pair is
the current active link.
- In case the valid links changed after connection
was already established, try to find a valid link pair
for EMLSR functionality, in case the EMSLR is not active
yet.
If a valid link pair is found call mac80211 to asynchronously
set the new link pair, otherwise continue using the current active
links.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231004123422.0c7b89ab29c2.I6600bd16551d75e2bf520d8d0add525568a9f85f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When MEI isn't built, it seems like successfully registering
would be wrong. Change this to an error so that in the rest
of the driver, mei_registered won't be true.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231004123422.d410a97cddfb.I7891544938d5edd5e6e7d2d99540b3637f2f1b1b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We shouldn't check the 0x10 bit here, since the register
holds different values (not just bit masks.). Check for
the exact value where this is needed only.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231004123422.ab21c7d5e219.I4f9906ebc7ecf38fd276510a276280a9261c8f7f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add a per-link debugfs entry in iwlmvm level so we can read/write link
related parameters.
Do it by implementing the link_add_debugfs API introduced by mac80211.
Each entry will have a path like this:
.../netdev:wlan0/link-X/iwlmvm/<file_name>
for each link X.
For non-MLD vifs this callback is called when the original vif
debugfs dir is also created, so handle that case by not creating
the 'iwlmvm' directory again.
Note that we don't have to worry about the cleaning the iwlmvm/*
directory as it is already done by mac80211 when removing the link
(or netdev).
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231004123422.6a161f021ae8.Ic8f40f2b4682270c94036e3c11c3996ae34266fa@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
mac80211 added a new callback to add a vif debugfs.
Implement it instead of adding the debugfs directly,
which will make it properly preserved over switching
the vif from non-MLD/MLD and back.
This requires some rework so that we still have the
symlink but trust mac80211 to add/remove the debugfs.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231004123422.818810e242e6.I805a28f9fbef5c52a3a575d04e7a6a909ecf9078@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
YoYo introduces 2 new region types: prph mac and phy blocks.
The data in this regions consists of a list of
(base address, size) pairs.
This way we can set a block of consecutive registers by the
base address and the size, instead of a list of registers.
Add support for parsing and dumping these new region types
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231004123422.0a10320f4259.I680ef6e16267d95329ee239f05d0999f5a1719ac@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
YoYo (debug data collection mechanism) is introducing 2 new types
of regions: prph mac/phy ranges.
These types will have a common logic of reading the data from the
device as the mac/phy prph has. Put it in a separate function so it can
be reused.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231004123422.16f06414c65c.Ie911bc83a1e2f8fddb27b4c5bd24f933f8b674b6@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Correct some typos.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: linux-wireless@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: netdev@vger.kernel.org
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20231001191633.19090-3-rdunlap@infradead.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Correct typos and fix run-on sentences.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: linux-wireless@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: netdev@vger.kernel.org
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20231001191633.19090-2-rdunlap@infradead.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Correct spelling of several words.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: linux-wireless@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: netdev@vger.kernel.org
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20231001191633.19090-1-rdunlap@infradead.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
As we are moving to MLO and links terms, also the airtime protection
will be done for a link rather than for a vif. Thus, some
drivers will need to know for which link to protect airtime.
Add link id as a parameter to the mgd_prepare_tx() callback.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230928172905.c7fc59a6780b.Ic88a5037d31e184a2dce0b031ece1a0a93a3a9da@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If there is a disassoc before the fisrt beacon we need to protect a
session for the deauth frame. Currently we are checking if we had a
beacon in the default link, which is wrong in a MLO connection and
link id != 0.
Fix this by checking all the active links, if none had a beacon then
protect a session.
If at least one link had a beacon there is no need for session
protection.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231004120820.d290f0ab77b0.Ic1505cf3d60f74580d31efa7e52046947c490b85@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When the station is marked as no longer authorized, we shouldn't
transmit to it any longer, but in particular we shouldn't be able
to transmit to it after removing keys, which might lead to frames
being sent out unencrypted depending on the exact hardware offload
mechanism. Thus, instead of flushing only on station destruction,
which covers only some cases, always flush on unauthorization.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230928172905.d47f528829e7.I96903652c7ee0c5c66891f8b2364383da8e45a1f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When this flow is invoked with the "drop" parameter as true,
we only drop the frames from the hw queues, but not from the
sw queues.
So when we call wake_queues() after hw queue purging, all the
frames from the sw queues will be TX'ed,
when what we actually want to do is to purge all queues
in order to not TX anything...
This can cause, for example, TXing data frames to the peer
after the deauth frame was sent.
Fix this by purging the sw queues in addition to the hw queues
if the drop parameter is true.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230928172905.8fc2ee23e56f.I8b3f6def9c28ea96261e2d31df8786986fb5385b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Since I'm getting a warning here right now, fix the
kernel-doc to be "Returns:" rather than just writing
that out in the doc paragraph.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230928172905.ab3b9274bf07.If263f9f6726d6ad4661f8603e6a4485e0385d67f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When the remain on channel is removed at the time it should
have expired, we have a race: the driver could be handling
the flow of the expiration while mac80211 is cancelling
that very same remain on channel request.
This wouldn't be problem in itself, but since mac80211
can send the next request to the driver in the cancellation
flow, we can get to the following situation:
CPU0 CPU1
expiration of roc in driver
ieee80211_remain_on_channel_expired()
Cancellation of the roc
schedules a worker (hw_roc_done)
Add next roc
hw_roc_done_wk runs and ends
the second roc prematurely.
Since, by design, there is only one single request sent to the
driver at a time, we can safely assume that after the cancel()
request returns from the driver, we should not handle any worker
that handles the expiration of the request.
Cancel the hw_roc_done worker after the cancellation to make
sure we start the next one with a clean slate.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230928172905.4e4469be20ac.Iab0525f5cc4698acf23eab98b8b1eec02099cde0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Since userspace can choose now what link to establish the
TDLS on, we should know on what channel to do session protection.
Add a link id parameter to this callback.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230928172905.ef12ce3eb835.If864f406cfd9e24f36a2b88fd13a37328633fcf9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When setting the interface links, ignore the change iff both the
valid links and the dormant links did not change. This is needed
to support cases where the valid links didn't change but the dormant
links did.
Fixes: 6d543b34db ("wifi: mac80211: Support disabled links during association")
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230928172905.0357b6306587.I7dbfec347949b629fea680d246a650d6207ff217@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When the scan parameters for a 6GHz scan specify a unicast
BSSID address, and the corresponding AP is found in the scan
list, add a corresponding entry in the collocated AP list,
so this AP would be directly probed even if it was not
advertised as a collocated AP.
This is needed for handling a scan request that is intended
for a ML probe flow, where user space can requests a scan
to retrieve information for other links in the AP MLD.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230928172905.54b954bc02ad.I1c072793d3d77a4c8fbbc64b4db5cce1bbb00382@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
