The "needed" controls the number of ext4_prealloc_space to discard in
ext4_discard_preallocations. Function ext4_discard_preallocations is
supposed to discard all non-used preallocated blocks when "needed"
is 0 and now ext4_discard_preallocations is always called with "needed"
= 0. Remove unnecessary parameter "needed" and remove all non-used
preallocated spaces in ext4_discard_preallocations to simplify the
code.
Note: If count of non-used preallocated spaces could be more than
UINT_MAX, there was a memory leak as some non-used preallocated
spaces are left ununsed and this commit will fix it. Otherwise,
there is no behavior change.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20240105092102.496631-9-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In our fault injection test, we create an ext4 file, migrate it to
non-extent based file, then punch a hole and finally trigger a WARN_ON
in the ext4_da_update_reserve_space():
EXT4-fs warning (device sda): ext4_da_update_reserve_space:369:
ino 14, used 11 with only 10 reserved data blocks
When writing back a non-extent based file, if we enable delalloc, the
number of reserved blocks will be subtracted from the number of blocks
mapped by ext4_ind_map_blocks(), and the extent status tree will be
updated. We update the extent status tree by first removing the old
extent_status and then inserting the new extent_status. If the block range
we remove happens to be in an extent, then we need to allocate another
extent_status with ext4_es_alloc_extent().
use old to remove to add new
|----------|------------|------------|
old extent_status
The problem is that the allocation of a new extent_status failed due to a
fault injection, and __es_shrink() did not get free memory, resulting in
a return of -ENOMEM. Then do_writepages() retries after receiving -ENOMEM,
we map to the same extent again, and the number of reserved blocks is again
subtracted from the number of blocks in that extent. Since the blocks in
the same extent are subtracted twice, we end up triggering WARN_ON at
ext4_da_update_reserve_space() because used > ei->i_reserved_data_blocks.
For non-extent based file, we update the number of reserved blocks after
ext4_ind_map_blocks() is executed, which causes a problem that when we call
ext4_ind_map_blocks() to create a block, it doesn't always create a block,
but we always reduce the number of reserved blocks. So we move the logic
for updating reserved blocks to ext4_ind_map_blocks() to ensure that the
number of reserved blocks is updated only after we do succeed in allocating
some new blocks.
Fixes: 5f634d064c ("ext4: Fix quota accounting error with fallocate")
Cc: stable@kernel.org
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230424033846.4732-2-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If a block is out of range in ext4_get_branch(), -ENOMEM will be returned
to user-space. Obviously, this error code isn't really useful. This
patch fixes it by making sure the right error code (-EFSCORRUPTED) is
propagated to user-space. EUCLEAN is more informative than ENOMEM.
Signed-off-by: Luís Henriques <lhenriques@suse.de>
Link: https://lore.kernel.org/r/20221109181445.17843-1-lhenriques@suse.de
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
We use jbd_debug() in some places in ext4. It seems a bit strange to use
jbd2 debugging output function for ext4 code. Also these days
ext4_debug() uses dynamic printk so each debug message can be enabled /
disabled on its own so the time when it made some sense to have these
combined (to allow easier common selecting of messages to report) has
passed. Just convert all jbd_debug() uses in ext4 to ext4_debug().
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Link: https://lore.kernel.org/r/20220608112355.4397-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
JBD2 layer support triggers which are called when journaling layer moves
buffer to a certain state. We can use the frozen trigger, which gets
called when buffer data is frozen and about to be written out to the
journal, to compute block checksums for some buffer types (similarly as
does ocfs2). This avoids unnecessary repeated recomputation of the
checksum (at the cost of larger window where memory corruption won't be
caught by checksumming) and is even necessary when there are
unsynchronized updaters of the checksummed data.
So add superblock and journal trigger type arguments to
ext4_journal_get_write_access() and ext4_journal_get_create_access() so
that frozen triggers can be set accordingly. Also add inode argument to
ext4_walk_page_buffers() and all the callbacks used with that function
for the same purpose. This patch is mostly only a change of prototype of
the above mentioned functions and a few small helpers. Real checksumming
will come later.
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210816095713.16537-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
There are currently multiple forms of assertion, such as J_ASSERT().
J_ASEERT() is provided for the jbd module, which is a public module.
Maybe we should use custom ASSERT() like other file systems, such as
xfs, which would be better.
Signed-off-by: Chunguang Xu <brookxu@tencent.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/1604764698-4269-1-git-send-email-brookxu@tencent.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We have already remove open codes that invoke helpers provide by
fs/buffer.c in all places reading metadata buffers. This patch switch to
use ext4_sb_bread() to replace all sb_bread() helpers, which is
ext4_read_bh() helper back end.
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Link: https://lore.kernel.org/r/20200924073337.861472-7-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Revome all open codes that read metadata buffers, switch to use
ext4_read_bh_*() common helpers.
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Suggested-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200924073337.861472-4-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Delete repeated words in fs/ext4/.
{the, this, of, we, after}
Also change spelling of "xttr" in inline.c to "xattr" in 2 places.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200805024850.12129-1-rdunlap@infradead.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In the scenario of writing sparse files, the per-inode prealloc list may
be very long, resulting in high overhead for ext4_mb_use_preallocated().
To circumvent this problem, we limit the maximum length of per-inode
prealloc list to 512 and allow users to modify it.
After patching, we observed that the sys ratio of cpu has dropped, and
the system throughput has increased significantly. We created a process
to write the sparse file, and the running time of the process on the
fixed kernel was significantly reduced, as follows:
Running time on unfixed kernel：
[root@TENCENT64 ~]# time taskset 0x01 ./sparse /data1/sparce.dat
real 0m2.051s
user 0m0.008s
sys 0m2.026s
Running time on fixed kernel：
[root@TENCENT64 ~]# time taskset 0x01 ./sparse /data1/sparce.dat
real 0m0.471s
user 0m0.004s
sys 0m0.395s
Signed-off-by: Chunguang Xu <brookxu@tencent.com>
Link: https://lore.kernel.org/r/d7a98178-056b-6db5-6bce-4ead23f4a257@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently, system zones just track ranges of block, that are "important"
fs metadata (bitmaps, group descriptors, journal blocks, etc.). This
however complicates how extent tree (or indirect blocks) can be checked
for inodes that actually track such metadata - currently the journal
inode but arguably we should be treating quota files or resize inode
similarly. We cannot run __ext4_ext_check() on such metadata inodes when
loading their extents as that would immediately trigger the validity
checks and so we just hack around that and special-case the journal
inode. This however leads to a situation that a journal inode which has
extent tree of depth at least one can have invalid extent tree that gets
unnoticed until ext4_cache_extents() crashes.
To overcome this limitation, track inode number each system zone belongs
to (0 is used for zones not belonging to any inode). We can then verify
inode number matches the expected one when verifying extent tree and
thus avoid the false errors. With this there's no need to to
special-case journal inode during extent tree checking anymore so remove
it.
Fixes: 0a944e8a6c ("ext4: don't perform block validity checks on the journal inode")
Reported-by: Wolfgang Frisch <wolfgang.frisch@suse.com>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200728130437.7804-4-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4_mark_inode_dirty() can fail for real reasons. Ignoring its return
value may lead ext4 to ignore real failures that would result in
corruption / crashes. Harden ext4_mark_inode_dirty error paths to fail
as soon as possible and return errors to the caller whenever
appropriate.
One of the possible scnearios when this bug could affected is that
while creating a new inode, its directory entry gets added
successfully but while writing the inode itself mark_inode_dirty
returns error which is ignored. This would result in inconsistency
that the directory entry points to a non-existent inode.
Ran gce-xfstests smoke tests and verified that there were no
regressions.
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20200427013438.219117-1-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Using a separate function, ext4_set_errno() to set the errno is
problematic because it doesn't do the right thing once
s_last_error_errorcode is non-zero. It's also less racy to set all of
the error information all at once. (Also, as a bonus, it shrinks code
size slightly.)
Link: https://lore.kernel.org/r/20200329020404.686965-1-tytso@mit.edu
Fixes: 878520ac45 ("ext4: save the error code which triggered...")
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Remove the ext4_ind_calc_metadata_amount() and
ext4_ext_calc_metadata_amount() functions, which have been unused since
commit 71d4f7d032 ("ext4: remove metadata reservation checks").
Also remove the i_da_metadata_calc_last_lblock and
i_da_metadata_calc_len fields from struct ext4_inode_info, as these were
only used by these removed functions.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20191231180444.46586-2-ebiggers@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
So far we have reserved only relatively high fixed amount of revoke
credits for each transaction. We over-reserved by large amount for most
cases but when freeing large directories or files with data journalling,
the fixed amount is not enough. In fact the worst case estimate is
inconveniently large (maximum extent size) for freeing of one extent.
We fix this by doing proper estimate of the amount of blocks that need
to be revoked when removing blocks from the inode due to truncate or
hole punching and otherwise reserve just a small amount of revoke
credits for each transaction to accommodate freeing of xattrs block or
so.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20191105164437.32602-23-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Provide ext4_journal_ensure_credits_fn() function to ensure transaction
has given amount of credits and call helper function to prepare for
restarting a transaction. This allows to remove some boilerplate code
from various places, add proper error handling for the case where
transaction extension or restart fails, and reduces following changes
needed for proper revoke record reservation tracking.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20191105164437.32602-10-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Error cleanup path in ext4_alloc_branch() calls ext4_forget() on freshly
allocated indirect blocks with 'metadata' set to 1. This results in
generating revoke records for these blocks. However this is unnecessary
as the freed blocks are only allocated in the current transaction and
thus they will never be journalled. Make this cleanup path similar to
e.g. cleanup in ext4_splice_branch() and use ext4_free_blocks() to
handle block forgetting by passing EXT4_FREE_BLOCKS_FORGET and not
EXT4_FREE_BLOCKS_METADATA to ext4_free_blocks(). This also allows
allocating transaction not to reserve any credits for revoke records.
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20191105164437.32602-9-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently, we are releasing the indirect buffer where we are done with
it in ext4_ind_remove_space(), so we can see the brelse() and
BUFFER_TRACE() everywhere. It seems fragile and hard to read, and we
may probably forget to release the buffer some day. This patch cleans
up the code by putting of the code which releases the buffers to the
end of the function.
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
All indirect buffers get by ext4_find_shared() should be released no
mater the branch should be freed or not. But now, we forget to release
the lower depth indirect buffers when removing space from the same
higher depth indirect block. It will lead to buffer leak and futher
more, it may lead to quota information corruption when using old quota,
consider the following case.
- Create and mount an empty ext4 filesystem without extent and quota
features,
- quotacheck and enable the user & group quota,
- Create some files and write some data to them, and then punch hole
to some files of them, it may trigger the buffer leak problem
mentioned above.
- Disable quota and run quotacheck again, it will create two new
aquota files and write the checked quota information to them, which
probably may reuse the freed indirect block(the buffer and page
cache was not freed) as data block.
- Enable quota again, it will invoke
vfs_load_quota_inode()->invalidate_bdev() to try to clean unused
buffers and pagecache. Unfortunately, because of the buffer of quota
data block is still referenced, quota code cannot read the up to date
quota info from the device and lead to quota information corruption.
This problem can be reproduced by xfstests generic/231 on ext3 file
system or ext4 file system without extent and quota features.
This patch fix this problem by releasing the missing indirect buffers,
in ext4_ind_remove_space().
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: stable@kernel.org
There is a plan to build the kernel with -Wimplicit-fallthrough and
these places in the code produced warnings (W=1). Fix them up.
This commit remove the following warnings:
fs/ext4/indirect.c:1182:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/ext4/indirect.c:1188:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/ext4/indirect.c:1432:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/ext4/indirect.c:1440:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
When ext4_ind_map_blocks() computes a length of a hole, it doesn't count
with the fact that mapped offset may be somewhere in the middle of the
completely empty subtree. In such case it will return too large length
of the hole which then results in lseek(SEEK_DATA) to end up returning
an incorrect offset beyond the end of the hole.
Fix the problem by correctly taking offset within a subtree into account
when computing a length of a hole.
Fixes: facab4d971
CC: stable@vger.kernel.org
Reported-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ea_inode contents are treated as metadata, that's why it is journaled
during initial writes. Failing to call revoke during freeing could cause
user data to be overwritten with original ea_inode contents during journal
replay.
Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently ext4 direct IO handling is split between ext4_ext_direct_IO()
and ext4_ind_direct_IO(). However the extent based function calls into
the indirect based one for some cases and for example it is not able to
handle file extending. Previously it was not also properly handling
retries in case of ENOSPC errors. With DAX things would get even more
contrieved so just refactor the direct IO code and instead of indirect /
extent split do the split to read vs writes.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently, ext4_map_blocks() just returns 0 when it finds a hole and
allocation is not requested. However we have all the information
available to tell how large the hole actually is and there are callers
of ext4_map_blocks() which would save some block-by-block hole iteration
if they knew this information. So fill in struct ext4_map_blocks even
for holes with the information we have. We keep returning 0 for holes to
maintain backward compatibility of the function.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Rename ext4_get_blocks_write() to ext4_get_blocks_unwritten() to better
describe what it does. Also split out get blocks functions for direct
IO. Later we move functionality from _ext4_get_blocks() there. There's no
functional change in this patch.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Create separate predicate functions to test/set/clear feature flags,
thereby replacing the wordy old macros. Furthermore, clean out the
places where we open-coded feature tests.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Instead of overloading EIO for CRC errors and corrupt structures,
return the same error codes that XFS returns for the same issues.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In order to handle the !CONFIG_TRANSPARENT_HUGEPAGES case, we need to
return VM_FAULT_FALLBACK from the inlined dax_pmd_fault(), which is
defined in linux/mm.h. Given that we don't want to include <linux/mm.h>
in <linux/fs.h>, the easiest solution is to move the DAX-related
functions to a new header, <linux/dax.h>. We could also have moved
VM_FAULT_* definitions to a new header, or a different header that isn't
quite such a boil-the-ocean header as <linux/mm.h>, but this felt like
the best option.
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
ext4 isn't willing to map clusters to a non-extent file. Don't signal
this with an out of space error, since the FS will retry the
allocation (which didn't fail) forever. Instead, return EUCLEAN so
that the operation will fail immediately all the way back to userspace.
(The fix is either to run e2fsck -E bmap2extent, or to chattr +e the file.)
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
In order to prevent quota block tracking to be inaccurate when
ext4_quota_write() fails with ENOSPC, we make two changes. The quota
file can now use the reserved block (since the quota file is arguably
file system metadata), and ext4_quota_write() now uses
ext4_should_retry_alloc() to retry the block allocation after a commit
has completed and released some blocks for allocation.
This fixes failures of xfstests generic/270:
Quota error (device vdc): write_blk: dquota write failed
Quota error (device vdc): qtree_write_dquot: Error -28 occurred while creating quota
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
do_blockdev_direct_IO() increments and decrements the inode
->i_dio_count for each IO operation. It does this to protect against
truncate of a file. Block devices don't need this sort of protection.
For a capable multiqueue setup, this atomic int is the only shared
state between applications accessing the device for O_DIRECT, and it
presents a scaling wall for that. In my testing, as much as 30% of
system time is spent incrementing and decrementing this value. A mixed
read/write workload improved from ~2.5M IOPS to ~9.6M IOPS, with
better latencies too. Before:
clat percentiles (usec):
| 1.00th=[ 33], 5.00th=[ 34], 10.00th=[ 34], 20.00th=[ 34],
| 30.00th=[ 34], 40.00th=[ 34], 50.00th=[ 35], 60.00th=[ 35],
| 70.00th=[ 35], 80.00th=[ 35], 90.00th=[ 37], 95.00th=[ 80],
| 99.00th=[ 98], 99.50th=[ 151], 99.90th=[ 155], 99.95th=[ 155],
| 99.99th=[ 165]
After:
clat percentiles (usec):
| 1.00th=[ 95], 5.00th=[ 108], 10.00th=[ 129], 20.00th=[ 149],
| 30.00th=[ 155], 40.00th=[ 161], 50.00th=[ 167], 60.00th=[ 171],
| 70.00th=[ 177], 80.00th=[ 185], 90.00th=[ 201], 95.00th=[ 270],
| 99.00th=[ 390], 99.50th=[ 398], 99.90th=[ 418], 99.95th=[ 422],
| 99.99th=[ 438]
In other setups, Robert Elliott reported seeing good performance
improvements:
https://lkml.org/lkml/2015/4/3/557
The more applications accessing the device, the worse it gets.
Add a new direct-io flags, DIO_SKIP_DIO_COUNT, which tells
do_blockdev_direct_IO() that it need not worry about incrementing
or decrementing the inode i_dio_count for this caller.
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Elliott, Robert (Server Storage) <elliott@hp.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The rw parameter to direct_IO is redundant with iov_iter->type, and
treated slightly differently just about everywhere it's used: some users
do rw & WRITE, and others do rw == WRITE where they should be doing a
bitwise check. Simplify this with the new iov_iter_rw() helper, which
always returns either READ or WRITE.
Signed-off-by: Omar Sandoval <osandov@osandov.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Most filesystems call through to these at some point, so we'll start
here.
Signed-off-by: Omar Sandoval <osandov@osandov.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
struct kiocb now is a generic I/O container, so move it to fs.h.
Also do a #include diet for aio.h while we're at it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
and read-only images (for which the implementation is mostly just the
reserved code point for a read-only feature :-)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=PF+t
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Ext4 bug fixes.
We also reserved code points for encryption and read-only images (for
which the implementation is mostly just the reserved code point for a
read-only feature :-)"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix indirect punch hole corruption
ext4: ignore journal checksum on remount; don't fail
ext4: remove duplicate remount check for JOURNAL_CHECKSUM change
ext4: fix mmap data corruption in nodelalloc mode when blocksize < pagesize
ext4: support read-only images
ext4: change to use setup_timer() instead of init_timer()
ext4: reserve codepoints used by the ext4 encryption feature
jbd2: complain about descriptor block checksum errors
This is a port of the DAX functionality found in the current version of
ext2.
[matthew.r.wilcox@intel.com: heavily tweaked]
[akpm@linux-foundation.org: remap_pages went away]
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Boaz Harrosh <boaz@plexistor.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 4f579ae7de (ext4: fix punch hole on files with indirect
mapping) rewrote FALLOC_FL_PUNCH_HOLE for ext4 files with indirect
mapping. However, there are bugs in several corner cases. This fixes 5
distinct bugs:
1. When there is at least one entire level of indirection between the
start and end of the punch range and the end of the punch range is the
first block of its level, we can't return early; we have to free the
intervening levels.
2. When the end is at a higher level of indirection than the start and
ext4_find_shared returns a top branch for the end, we still need to free
the rest of the shared branch it returns; we can't decrement partial2.
3. When a punch happens within one level of indirection, we need to
converge on an indirect block that contains the start and end. However,
because the branches returned from ext4_find_shared do not necessarily
start at the same level (e.g., the partial2 chain will be shallower if
the last block occurs at the beginning of an indirect group), the walk
of the two chains can end up "missing" each other and freeing a bunch of
extra blocks in the process. This mismatch can be handled by first
making sure that the chains are at the same level, then walking them
together until they converge.
4. When the punch happens within one level of indirection and
ext4_find_shared returns a top branch for the start, we must free it,
but only if the end does not occur within that branch.
5. When the punch happens within one level of indirection and
ext4_find_shared returns a top branch for the end, then we shouldn't
free the block referenced by the end of the returned chain (this mirrors
the different levels case).
Signed-off-by: Omar Sandoval <osandov@osandov.com>
The EXT4_STATE_DELALLOC_RESERVED flag was originally implemented
because it was too hard to make sure the mballoc and get_block flags
could be reliably passed down through all of the codepaths that end up
calling ext4_mb_new_blocks().
Since then, we have mb_flags passed down through most of the code
paths, so getting rid of EXT4_STATE_DELALLOC_RESERVED isn't as tricky
as it used to.
This commit plumbs in the last of what is required, and then adds a
WARN_ON check to make sure we haven't missed anything. If this passes
a full regression test run, we can then drop
EXT4_STATE_DELALLOC_RESERVED.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Instead of initializing the allocation_request structure in
ext4_alloc_branch(), set it up in ext4_ind_map_blocks(), and then pass
it to ext4_alloc_branch() and ext4_splice_branch().
This allows ext4_ind_map_blocks to pass flags in the allocation
request structure without having to add Yet Another argument to
ext4_alloc_branch().
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Currently punch hole code on files with direct/indirect mapping has some
problems which may lead to a data loss. For example (from Jan Kara):
fallocate -n -p 10240000 4096
will punch the range 10240000 - 12632064 instead of the range 1024000 -
10244096.
Also the code is a bit weird and it's not using infrastructure provided
by indirect.c, but rather creating it's own way.
This patch fixes the issues as well as making the operation to run 4
times faster from my testing (punching out 60GB file). It uses similar
approach used in ext4_ind_truncate() which takes advantage of
ext4_free_branches() function.
Also rename the ext4_free_hole_blocks() to something more sensible, like
the equivalent we have for extent mapped files. Call it
ext4_ind_remove_space().
This has been tested mostly with fsx and some xfstests which are testing
punch hole but does not require unwritten extents which are not
supported with direct/indirect mapping. Not problems showed up even with
1024k block size.
CC: stable@vger.kernel.org
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Hole punching code for files with indirect blocks wrongly computed
number of blocks which need to be cleared when traversing the indirect
block tree. That could result in punching more blocks than actually
requested and thus effectively cause a data loss. For example:
fallocate -n -p 10240000 4096
will punch the range 10240000 - 12632064 instead of the range 1024000 -
10244096. Fix the calculation.
CC: stable@vger.kernel.org
Fixes: 8bad6fc813
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
free_holes_block() passed local variable as a block pointer
to ext4_clear_blocks(). Thus ext4_clear_blocks() zeroed out this local
variable instead of proper place in inode / indirect block. We later
zero out proper place in inode / indirect block but don't dirty the
inode / buffer again which can lead to subtle issues (some changes e.g.
to inode can be lost).
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
