According to the NAPI documentation networking/napi.rst, for the ethtool
API a channel is a IRQ/NAPI which services queues of a given type.
tsnep uses a single IRQ/NAPI instance for every TX/RX queue pair.
Therefore, combined channels shall be returned instead of separate tx/rx
channels.
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
According to the NAPI documentation networking/napi.rst, drivers which
have to mask interrupts explicitly should use the napi_schedule_prep()
and __napi_schedule() calls.
No problem seen so far with current implementation. Nevertheless, let's
align the implementation with documentation.
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As a result of the recent Kconfig reworks, the default settings for the
framebuffer interfaces changed in unexpected ways:
Configurations that leave CONFIG_FB disabled but use DRM now get
DRM_FBDEV_EMULATION by default. This also turns on the deprecated /dev/fb
device nodes for machines that don't actually want it.
In turn, configurations that previously had DRM_FBDEV_EMULATION enabled
now only get the /dev/fb front-end but not the more useful framebuffer
console, which is not selected any more.
We had previously decided that any combination of the three frontends
(FB_DEVICE, FRAMEBUFFER_CONSOLE and LOGO) should be selectable, but the
new default settings mean that a lot of defconfig files would have to
get adapted.
Change the defaults back to what they were in Linux 6.5:
- Leave DRM_FBDEV_EMULATION turned off unless CONFIG_FB
is enabled. Previously this was a hard dependency but now the two are
independent. However, configurations that enable CONFIG_FB probably
also want to keep the emulation for DRM, while those without FB
presumably did that intentionally in the past.
- Leave FB_DEVICE turned off for FB=n. Following the same
logic, the deprecated option should not automatically get enabled
here, most users that had FB turned off in the past do not want it,
even if they want the console
- Turn the FRAMEBUFFER_CONSOLE option on if
DRM_FBDEV_EMULATION is set to avoid having to change defconfig
files that relied on it being selected unconditionally in the past.
This also makes sense since both LOGO and FB_DEVICE are now disabled
by default for builds without CONFIG_FB, but DRM_FBDEV_EMULATION
would make no sense if all three are disabled.
Fixes: a5ae331edb ("drm: Drop select FRAMEBUFFER_CONSOLE for DRM_FBDEV_EMULATION")
Fixes: 701d2054fa ("fbdev: Make support for userspace interfaces configurable")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230911205338.2385278-1-arnd@kernel.org
Sebastian Andrzej Siewior says:
====================
net: hsr: Properly parse HSRv1 supervisor frames.
this is a follow-up to
https://lore.kernel.org/all/20230825153111.228768-1-lukma@denx.de/
replacing
https://lore.kernel.org/all/20230914124731.1654059-1-lukma@denx.de/
by grabing/ adding tags and reposting with a commit message plus a
missing __packed to a struct (#2) plus extending the testsuite to sover
HSRv1 which is what broke here (#3-#5).
HSRv0 is (was) not affected.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The testsuite already has simply tests for HSRv0. The testuite would
have been able to notice the v1 breakage if it was there at the time.
Extend the testsuite to also cover HSRv1.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move the code and group into functions so it will be easier to extend
the test to HSRv1 so that both versions are covered.
Move the ping/test part into do_complete_ping_test() and the interface
setup into setup_hsr_interfaces().
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
The timeout in the while loop is never subtracted due wrong usage of
`let' leading to an endless loop if the former condition never gets
true.
Put the statement for let in quotes so it is parsed as a single
statement.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Struct hsr_sup_tlv describes HW layout and therefore it needs a __packed
attribute to ensure the compiler does not add any padding.
Due to the size and __packed attribute of the structs that use
hsr_sup_tlv it has no functional impact.
Add __packed to struct hsr_sup_tlv.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
While adding support for parsing the redbox supervision frames, the
author added `pull_size' and `total_pull_size' to track the amount of
bytes that were pulled from the skb during while parsing the skb so it
can be reverted/ pushed back at the end.
In the process probably copy&paste error occurred and for the HSRv1 case
the ethhdr was used instead of the hsr_tag. Later the hsr_tag was used
instead of hsr_sup_tag. The later error didn't matter because both
structs have the size so HSRv0 was still working. It broke however HSRv1
parsing because struct ethhdr is larger than struct hsr_tag.
Reinstate the old pulling flow and pull first ethhdr, hsr_tag in v1 case
followed by hsr_sup_tag.
[bigeasy: commit message]
Fixes: eafaa88b3e ("net: hsr: Add support for redbox supervision frames")'
Suggested-by: Tristram.Ha@microchip.com
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
The code calling ima_free_kexec_buffer() runs long after the memblock
allocator has already been torn down, potentially resulting in a use
after free in memblock_isolate_range().
With KASAN or KFENCE, this use after free will result in a BUG
from the idle task, and a subsequent kernel panic.
Switch ima_free_kexec_buffer() over to memblock_free_late() to avoid
that bug.
Fixes: fee3ff99bc ("powerpc: Move arch independent ima kexec functions to drivers/of/kexec.c")
Suggested-by: Mike Rappoport <rppt@kernel.org>
Signed-off-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230817135558.67274c83@imladris.surriel.com
Report the carrier/no-carrier state for the network interface
shared between the BMC and the passthrough channel. Without this
functionality the BMC is unable to reconfigure the NIC in the event
of a re-cabling to a different subnet.
Signed-off-by: Johnathan Mantey <johnathanx.mantey@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Syzkaller reported a sleep in atomic context bug relating to the HASHCHK
handler logic:
BUG: sleeping function called from invalid context at arch/powerpc/kernel/traps.c:1518
in_atomic(): 0, irqs_disabled(): 1, non_block: 0, pid: 25040, name: syz-executor
preempt_count: 0, expected: 0
RCU nest depth: 0, expected: 0
no locks held by syz-executor/25040.
irq event stamp: 34
hardirqs last enabled at (33): [<c000000000048b38>] prep_irq_for_enabled_exit arch/powerpc/kernel/interrupt.c:56 [inline]
hardirqs last enabled at (33): [<c000000000048b38>] interrupt_exit_user_prepare_main+0x148/0x600 arch/powerpc/kernel/interrupt.c:230
hardirqs last disabled at (34): [<c00000000003e6a4>] interrupt_enter_prepare+0x144/0x4f0 arch/powerpc/include/asm/interrupt.h:176
softirqs last enabled at (0): [<c000000000281954>] copy_process+0x16e4/0x4750 kernel/fork.c:2436
softirqs last disabled at (0): [<0000000000000000>] 0x0
CPU: 15 PID: 25040 Comm: syz-executor Not tainted 6.5.0-rc5-00001-g3ccdff6bb06d #3
Hardware name: IBM,9105-22A POWER10 (raw) 0x800200 0xf000006 of:IBM,FW1040.00 (NL1040_021) hv:phyp pSeries
Call Trace:
[c0000000a8247ce0] [c00000000032b0e4] __might_resched+0x3b4/0x400 kernel/sched/core.c:10189
[c0000000a8247d80] [c0000000008c7dc8] __might_fault+0xa8/0x170 mm/memory.c:5853
[c0000000a8247dc0] [c00000000004160c] do_program_check+0x32c/0xb20 arch/powerpc/kernel/traps.c:1518
[c0000000a8247e50] [c000000000009b2c] program_check_common_virt+0x3bc/0x3c0
To determine if a trap was caused by a HASHCHK instruction, we inspect
the user instruction that triggered the trap. However this may sleep
if the page needs to be faulted in (get_user_instr() reaches
__get_user(), which calls might_fault() and triggers the bug message).
Move the HASHCHK handler logic to after we allow IRQs, which is fine
because we are only interested in HASHCHK if it's a user space trap.
Fixes: 5bcba4e6c1 ("powerpc/dexcr: Handle hashchk exception")
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230915034604.45393-1-bgray@linux.ibm.com
It used to be impossible to select CONFIG_CPM2 without selecting
CONFIG_FSL_SOC at the same time because CONFIG_CPM2 was dependent
on CONFIG_8260 and CONFIG_8260 was selecting CONFIG_FSL_SOC.
But after commit eb5aa21372 ("powerpc/82xx: Remove CONFIG_8260
and CONFIG_8272") CONFIG_CPM2 depends on CONFIG_PPC_82xx instead
but CONFIG_PPC_82xx doesn't directly selects CONFIG_FSL_SOC.
Fix it by forcing CONFIG_PPC_82xx to select CONFIG_FSL_SOC just
like already done by PPC_8xx, PPC_MPC512x, PPC_83xx, PPC_86xx.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Fixes: eb5aa21372 ("powerpc/82xx: Remove CONFIG_8260 and CONFIG_8272")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/7ab513546148ebe33ddd4b0ea92c7bfd3cce3ad7.1694705016.git.christophe.leroy@csgroup.eu
We recently added support for -fpatchable-function-entry and it is
enabled by default on ppc32 (ppc64 needs gcc v13.1.0). When building the
kernel for ppc32 and also enabling CONFIG_LD_DEAD_CODE_DATA_ELIMINATION,
we see the below build error with older gcc versions:
powerpc-linux-gnu-ld: init/main.o(__patchable_function_entries): error: need linked-to section for --gc-sections
This error is thrown since __patchable_function_entries section would be
garbage collected with --gc-sections since it does not reference any
other kept sections. This has subsequently been fixed with:
https://sourceware.org/git/?p=binutils-gdb.git;a=commitdiff;h=b7d072167715829eed0622616f6ae0182900de3e
Disable LD_DEAD_CODE_DATA_ELIMINATION for gcc versions before v11.1.0 if
using -fpatchable-function-entry to avoid this bug.
Fixes: 0f71dcfb4a ("powerpc/ftrace: Add support for -fpatchable-function-entry")
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Naveen N Rao <naveen@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230913134129.2782088-1-naveen@kernel.org
It can be easy to miss that the notifier mechanism invokes the callbacks
in an atomic context, so add some comments to that effect on the two
handlers we register here.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230829063457.54157-4-bgray@linux.ibm.com
This is called in an atomic context, so is not allowed to sleep if a
user page needs to be faulted in and has nowhere it can be deferred to.
The pagefault_disabled() function is documented as preventing user
access methods from sleeping.
In practice the page will be mapped in nearly always because we are
reading the instruction that just triggered the watchpoint trap.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230829063457.54157-3-bgray@linux.ibm.com
thread_change_pc() uses CPU local data, so must be protected from
swapping CPUs while it is reading the breakpoint struct.
The error is more noticeable after 1e60f3564b ("powerpc/watchpoints:
Track perf single step directly on the breakpoint"), which added an
unconditional __this_cpu_read() call in thread_change_pc(). However the
existing __this_cpu_read() that runs if a breakpoint does need to be
re-inserted has the same issue.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230829063457.54157-2-bgray@linux.ibm.com
Valid domain value is in range 1 to HV_PERF_DOMAIN_MAX. Current code has
check for domain value greater than or equal to HV_PERF_DOMAIN_MAX. But
the check for domain value 0 is missing.
Fix this issue by adding check for domain value 0.
Before:
# ./perf stat -v -e hv_24x7/CPM_ADJUNCT_INST,domain=0,core=1/ sleep 1
Using CPUID 00800200
Control descriptor is not initialized
Error:
The sys_perf_event_open() syscall returned with 5 (Input/output error) for
event (hv_24x7/CPM_ADJUNCT_INST,domain=0,core=1/).
/bin/dmesg | grep -i perf may provide additional information.
Result from dmesg:
[ 37.819387] hv-24x7: hcall failed: [0 0x60040000 0x100 0] => ret
0xfffffffffffffffc (-4) detail=0x2000000 failing ix=0
After:
# ./perf stat -v -e hv_24x7/CPM_ADJUNCT_INST,domain=0,core=1/ sleep 1
Using CPUID 00800200
Control descriptor is not initialized
Warning:
hv_24x7/CPM_ADJUNCT_INST,domain=0,core=1/ event is not supported by the kernel.
failed to read counter hv_24x7/CPM_ADJUNCT_INST,domain=0,core=1/
Fixes: ebd4a5a3eb ("powerpc/perf/hv-24x7: Minor improvements")
Reported-by: Krishan Gopal Sarawast <krishang@linux.vnet.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Tested-by: Disha Goel <disgoel@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230825055601.360083-1-kjain@linux.ibm.com
- Fix an UV boot crash,
- Skip spurious ENDBR generation on _THIS_IP_,
- Fix ENDBR use in putuser() asm methods,
- Fix corner case boot crashes on 5-level paging,
- and fix a false positive WARNING on LTO kernels.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=BMjT
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2023-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Misc fixes:
- Fix an UV boot crash
- Skip spurious ENDBR generation on _THIS_IP_
- Fix ENDBR use in putuser() asm methods
- Fix corner case boot crashes on 5-level paging
- and fix a false positive WARNING on LTO kernels"
* tag 'x86-urgent-2023-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/purgatory: Remove LTO flags
x86/boot/compressed: Reserve more memory for page tables
x86/ibt: Avoid duplicate ENDBR in __put_user_nocheck*()
x86/ibt: Suppress spurious ENDBR
x86/platform/uv: Use alternate source for socket to node data
balancing bug, and a topology setup bug on (Intel) hybrid processors.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=jIeN
-----END PGP SIGNATURE-----
Merge tag 'sched-urgent-2023-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
"Fix a performance regression on large SMT systems, an Intel SMT4
balancing bug, and a topology setup bug on (Intel) hybrid processors"
* tag 'sched-urgent-2023-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sched: Restore the SD_ASYM_PACKING flag in the DIE domain
sched/fair: Fix SMT4 group_smt_balance handling
sched/fair: Optimize should_we_balance() for large SMT systems
The choose_32_64() macros were added to deal with an odd inconsistency
between the 32-bit and 64-bit layout of 'struct stat' way back when in
commit a52dd971f9 ("vfs: de-crapify "cp_new_stat()" function").
Then a decade later Mikulas noticed that said inconsistency had been a
mistake in the early x86-64 port, and shouldn't have existed in the
first place. So commit 932aba1e16 ("stat: fix inconsistency between
struct stat and struct compat_stat") removed the uses of the helpers.
But the helpers remained around, unused.
Get rid of them.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----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=WtnH
-----END PGP SIGNATURE-----
Merge tag '6.6-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
"Three small SMB3 client fixes, one to improve a null check and two
minor cleanups"
* tag '6.6-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb3: fix some minor typos and repeated words
smb3: correct places where ENOTSUPP is used instead of preferred EOPNOTSUPP
smb3: move server check earlier when setting channel sequence number
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmUGh1YACgkQ8vlZVpUN
gaN9lQgAqmMWu3xLwOERgVbK3CYT8WMcv0m9/by+vSwghCoPVDWWENgEgAzo4YpK
Lsp4q62wHaWs6AzvJEaJ8ryedo7e4FUHxcvp2f6dCuOPadOEZZZTa4G5fAr0kYXS
TIoaFtv6F2QVnGU6Y5lhtfYzmgLRdLL0B6MfSTYGO2MSREqxapvfxyGBQdkOuXfO
UEtrUUEqQ2GdDcKp+FRRnaUvNaTPEESY8d5eVwrMmyUhQWUQL/N2BPbFkk1TP6RG
MLDNsUZpdhZvLs6qLuR7dvO5wa2fshvRJIXlPINM0R0as5LmHqVL/ifCNkCn4W+k
ZNvdSPhqew68KHHq3sYFtm9rbZ3YOA==
=DopS
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Regression and bug fixes for ext4"
* tag 'ext4_for_linus-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix rec_len verify error
ext4: do not let fstrim block system suspend
ext4: move setting of trimmed bit into ext4_try_to_trim_range()
jbd2: Fix memory leak in journal_init_common()
jbd2: Remove page size assumptions
buffer: Make bh_offset() work for compound pages
queue
Tony Nguyen says:
====================
This series contains updates to iavf and i40e drivers.
Radoslaw prevents admin queue operations being added when the driver is
being removed for iavf.
Petr Oros immediately starts reconfiguration on changes to VLANs on
iavf.
Ivan Vecera moves reset of VF to occur after port VLAN values are set
on i40e.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Nothing prevents iscsi_sw_tcp_conn_bind() to receive file descriptor
pointing to non TCP socket (af_unix for example).
Return -EINVAL if this is attempted, instead of crashing the kernel.
Fixes: 7ba2471389 ("[SCSI] open-iscsi/linux-iscsi-5 Initiator: Initiator code")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Lee Duncan <lduncan@suse.com>
Cc: Chris Leech <cleech@redhat.com>
Cc: Mike Christie <michael.christie@oracle.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: open-iscsi@googlegroups.com
Cc: linux-scsi@vger.kernel.org
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, we assume the skb is associated with a device before calling
__ip_options_compile, which is not always the case if it is re-routed by
ipvs.
When skb->dev is NULL, dev_net(skb->dev) will become null-dereference.
This patch adds a check for the edge case and switch to use the net_device
from the rtable when skb->dev is NULL.
Fixes: ed0de45a10 ("ipv4: recompile ip options in ipv4_link_failure")
Suggested-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Kyle Zeng <zengyhkyle@gmail.com>
Cc: Stephen Suryaputra <ssuryaextr@gmail.com>
Cc: Vadim Fedorenko <vfedorenko@novek.ru>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
-flto* implies -ffunction-sections. With LTO enabled, ld.lld generates
multiple .text sections for purgatory.ro:
$ readelf -S purgatory.ro | grep " .text"
[ 1] .text PROGBITS 0000000000000000 00000040
[ 7] .text.purgatory PROGBITS 0000000000000000 000020e0
[ 9] .text.warn PROGBITS 0000000000000000 000021c0
[13] .text.sha256_upda PROGBITS 0000000000000000 000022f0
[15] .text.sha224_upda PROGBITS 0000000000000000 00002be0
[17] .text.sha256_fina PROGBITS 0000000000000000 00002bf0
[19] .text.sha224_fina PROGBITS 0000000000000000 00002cc0
This causes WARNING from kexec_purgatory_setup_sechdrs():
WARNING: CPU: 26 PID: 110894 at kernel/kexec_file.c:919
kexec_load_purgatory+0x37f/0x390
Fix this by disabling LTO for purgatory.
[ AFAICT, x86 is the only arch that supports LTO and purgatory. ]
We could also fix this with an explicit linker script to rejoin .text.*
sections back into .text. However, given the benefit of LTOing purgatory
is small, simply disable the production of more .text.* sections for now.
Fixes: b33fff07e3 ("x86, build: allow LTO to be selected")
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/r/20230914170138.995606-1-song@kernel.org
The decompressor has a hard limit on the number of page tables it can
allocate. This limit is defined at compile-time and will cause boot
failure if it is reached.
The kernel is very strict and calculates the limit precisely for the
worst-case scenario based on the current configuration. However, it is
easy to forget to adjust the limit when a new use-case arises. The
worst-case scenario is rarely encountered during sanity checks.
In the case of enabling 5-level paging, a use-case was overlooked. The
limit needs to be increased by one to accommodate the additional level.
This oversight went unnoticed until Aaron attempted to run the kernel
via kexec with 5-level paging and unaccepted memory enabled.
Update wost-case calculations to include 5-level paging.
To address this issue, let's allocate some extra space for page tables.
128K should be sufficient for any use-case. The logic can be simplified
by using a single value for all kernel configurations.
[ Also add a warning, should this memory run low - by Dave Hansen. ]
Fixes: 34bbb0009f ("x86/boot/compressed: Enable 5-level paging during decompression stage")
Reported-by: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230915070221.10266-1-kirill.shutemov@linux.intel.com
- Fix kernel-devel RPM and linux-headers Deb package
- Fix too long argument list error in 'make modules_install'
-----BEGIN PGP SIGNATURE-----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=2LRy
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix kernel-devel RPM and linux-headers Deb package
- Fix too long argument list error in 'make modules_install'
* tag 'kbuild-fixes-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: avoid long argument lists in make modules_install
kbuild: fix kernel-devel RPM package and linux-headers Deb package
Commit 408579cd62 ("mm: Update do_vmi_align_munmap() return
semantics") seems to have updated one of the callers of do_vmi_munmap()
incorrectly: it used to check for the error case (which didn't
change: negative means error).
That commit changed the check to the success case (which did change:
before that commit, 0 was success, and 1 was "success and lock
downgraded". After the change, it's always 0 for success, and the lock
will have been released if requested).
This didn't change any actual VM behavior _except_ for memory accounting
when 'VM_ACCOUNT' was set on the vma. Which made the wrong return value
test fairly subtle, since everything continues to work.
Or rather - it continues to work but the "Committed memory" accounting
goes all wonky (Committed_AS value in /proc/meminfo), and depending on
settings that then causes problems much much later as the VM relies on
bogus statistics for its heuristics.
Revert that one line of the change back to the original logic.
Fixes: 408579cd62 ("mm: Update do_vmi_align_munmap() return semantics")
Reported-by: Christoph Biedl <linux-kernel.bfrz@manchmal.in-ulm.de>
Reported-bisected-and-tested-by: Michael Labiuk <michael.labiuk@virtuozzo.com>
Cc: Bagas Sanjaya <bagasdotme@gmail.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Link: https://lore.kernel.org/all/1694366957@msgid.manchmal.in-ulm.de/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 small(ish) fixes all in drivers. The major fixes are in pm8001
(fixes MSI-X issue going back to its origin), the qla2xxx endianness
fix, which fixes a bug on big endian and the lpfc ones which can cause
an oops on module removal without them.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZQXNvyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishRKxAP4kCOBR
UOGLJJdhmotofj9GX0Rr1qAFheJmTSAT6ctAOgD+IWucKDqKfbRLbmzqiSvmWmul
P0STz4VnUKs9LqdLyok=
=3wre
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"16 small(ish) fixes all in drivers.
The major fixes are in pm8001 (fixes MSI-X issue going back to its
origin), the qla2xxx endianness fix, which fixes a bug on big endian
and the lpfc ones which can cause an oops on module removal without
them"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: lpfc: Prevent use-after-free during rmmod with mapped NVMe rports
scsi: lpfc: Early return after marking final NLP_DROPPED flag in dev_loss_tmo
scsi: lpfc: Fix the NULL vs IS_ERR() bug for debugfs_create_file()
scsi: target: core: Fix target_cmd_counter leak
scsi: pm8001: Setup IRQs on resume
scsi: pm80xx: Avoid leaking tags when processing OPC_INB_SET_CONTROLLER_CONFIG command
scsi: pm80xx: Use phy-specific SAS address when sending PHY_START command
scsi: ufs: core: Poll HCS.UCRDY before issuing a UIC command
scsi: ufs: core: Move __ufshcd_send_uic_cmd() outside host_lock
scsi: qedf: Add synchronization between I/O completions and abort
scsi: target: Replace strlcpy() with strscpy()
scsi: qla2xxx: Fix NULL vs IS_ERR() bug for debugfs_create_dir()
scsi: qla2xxx: Use raw_smp_processor_id() instead of smp_processor_id()
scsi: qla2xxx: Correct endianness for rqstlen and rsplen
scsi: ppa: Fix accidentally reversed conditions for 16-bit and 32-bit EPP
scsi: megaraid_sas: Fix deadlock on firmware crashdump
- Fix link power management transitions to disallow unsupported
states (Niklas).
- A small string handling fix for the sata_mv driver (Christophe).
- Clear port pending interrupts before reset, as per AHCI
specifications (Szuying). Followup fixes for this one are to not
clear ATA_PFLAG_EH_PENDING in ata_eh_reset() to allow EH to
continue on with other actions recorded with error interrupts
triggered before EH completes. A~Nd an additional fix to avoid
thawing a port twice in EH (Niklas).
- Small code style fixes in the pata_parport driver to silence the
build bot as it keeps complaining about bad indentation (me).
- A fix for the recent CDL code to avoid fetching sense data for
successful commands when not necessary for correct operation
(Niklas).
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCZQWcYAAKCRDdoc3SxdoY
dg0HAQDxkfzueH5T00LSsg9+jI73eMScmC7asR3cbwmEiTRATgEAxpWUgaR7e7YP
ZM9XWTyfcCYTfAEaJduS5a6ThHl3pAI=
=gTtf
-----END PGP SIGNATURE-----
Merge tag 'ata-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ata fixes from Damien Le Moal:
- Fix link power management transitions to disallow unsupported states
(Niklas)
- A small string handling fix for the sata_mv driver (Christophe)
- Clear port pending interrupts before reset, as per AHCI
specifications (Szuying).
Followup fixes for this one are to not clear ATA_PFLAG_EH_PENDING in
ata_eh_reset() to allow EH to continue on with other actions recorded
with error interrupts triggered before EH completes. And an
additional fix to avoid thawing a port twice in EH (Niklas)
- Small code style fixes in the pata_parport driver to silence the
build bot as it keeps complaining about bad indentation (me)
- A fix for the recent CDL code to avoid fetching sense data for
successful commands when not necessary for correct operation (Niklas)
* tag 'ata-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: libata-core: fetch sense data for successful commands iff CDL enabled
ata: libata-eh: do not thaw the port twice in ata_eh_reset()
ata: libata-eh: do not clear ATA_PFLAG_EH_PENDING in ata_eh_reset()
ata: pata_parport: Fix code style issues
ata: libahci: clear pending interrupt status
ata: sata_mv: Fix incorrect string length computation in mv_dump_mem()
ata: libata: disallow dev-initiated LPM transitions to unsupported states
Here is a single USB fix for a much-reported regression for 6.6-rc1.
It resolves a crash in the typec debugfs code for many systems. It's
been in linux-next with no reported issues, and many people have
reported it resolving their problem with 6.6-rc1.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZQWXNQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymxmwCcDS42Mt0fXkxsjzJy4KCNSCNEvcYAoJ/wfVw7
K2NylIy78y0PEvO4i0H9
=8qKC
-----END PGP SIGNATURE-----
Merge tag 'usb-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fix from Greg KH:
"Here is a single USB fix for a much-reported regression for 6.6-rc1.
It resolves a crash in the typec debugfs code for many systems. It's
been in linux-next with no reported issues, and many people have
reported it resolving their problem with 6.6-rc1"
* tag 'usb-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: typec: ucsi: Fix NULL pointer dereference
Here is a single driver core fix for a much-reported-by-sysbot issue
that showed up in 6.6-rc1. It's been submitted by many people, all in
the same way, so it obviously fixes things for them all.
Also in here is a single documentation update adding riscv to the
embargoed hardware document in case there are any future issues with
that processor family.
Both of these have been in linux-next with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZQWXxA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymPaQCgg34ErWYWTR2q/uCf4cpBce0q2xAAn226mZ6f
Tt90d/o0lXnhtV8mXnWm
=3Ye9
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here is a single driver core fix for a much-reported-by-sysbot issue
that showed up in 6.6-rc1. It's been submitted by many people, all in
the same way, so it obviously fixes things for them all.
Also in here is a single documentation update adding riscv to the
embargoed hardware document in case there are any future issues with
that processor family.
Both of these have been in linux-next with no reported problems"
* tag 'driver-core-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
Documentation: embargoed-hardware-issues.rst: Add myself for RISC-V
driver core: return an error when dev_set_name() hasn't happened
Here is a single patch for 6.6-rc2 that reverts a 6.5 change for the
comedi subsystem that has ended up being incorrect and caused drivers
that were working for people to be unable to be able to be selected to
build at all. To fix this, the Kconfig change needs to be reverted and
a future set of fixes for the ioport dependancies will show up in
6.7-rc1 (there's no rush for them.)
This has been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZQWYWg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylW2ACdGSq8skVr8qCcaQ7z1nbrc/HWcXgAoKxrP53E
08QGj1NOD8cqWIcClQfg
=dvIN
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc fix from Greg KH:
"Here is a single patch for 6.6-rc2 that reverts a 6.5 change for the
comedi subsystem that has ended up being incorrect and caused drivers
that were working for people to be unable to be able to be selected to
build at all.
To fix this, the Kconfig change needs to be reverted and a future set
of fixes for the ioport dependancies will show up in 6.7-rc1 (there's
no rush for them.)
This has been in linux-next with no reported issues"
* tag 'char-misc-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
Revert "comedi: add HAS_IOPORT dependencies"
are converted now. Thanks Uwe, this marks the end of a long conversion
process. Other than that, we have a few Kconfig updates and driver
bugfixes.
-----BEGIN PGP SIGNATURE-----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=hFC5
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"The main thing is the removal of 'probe_new' because all i2c client
drivers are converted now. Thanks Uwe, this marks the end of a long
conversion process.
Other than that, we have a few Kconfig updates and driver bugfixes"
* tag 'i2c-for-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: cadence: Fix the kernel-doc warnings
i2c: aspeed: Reset the i2c controller when timeout occurs
i2c: I2C_MLXCPLD on ARM64 should depend on ACPI
i2c: Make I2C_ATR invisible
i2c: Drop legacy callback .probe_new()
w1: ds2482: Switch back to use struct i2c_driver's .probe()
When an XDP redirect happens before the link is ready, that
transmission will not finish and will timeout, causing an adapter
reset. If the redirects do not stop, the adapter will not stop
resetting.
Wait for the driver to signal that there's a carrier before allowing
transmissions to proceed.
Previous code was relying that when __IGC_DOWN is cleared, the NIC is
ready to transmit as all the queues are ready, what happens is that
the carrier presence will only be signaled later, after the watchdog
workqueue has a chance to run. And during this interval (between
clearing __IGC_DOWN and the watchdog running) if any transmission
happens the timeout is emitted (detected by igc_tx_timeout()) which
causes the reset, with the potential for the infinite loop.
Fixes: 4ff3203610 ("igc: Add support for XDP_REDIRECT action")
Reported-by: Ferenc Fejes <ferenc.fejes@ericsson.com>
Closes: https://lore.kernel.org/netdev/0caf33cf6adb3a5bf137eeaa20e89b167c9986d5.camel@ericsson.com/
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Ferenc Fejes <ferenc.fejes@ericsson.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use bitmap_zalloc() and bitmap_free() instead of hand-writing them.
It is less verbose and it improves the type checking and semantic.
While at it, add missing header inclusion (should be bitops.h,
but with the above change it becomes bitmap.h).
Suggested-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230911154534.4174265-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, we fetch sense data for a _successful_ command if either:
1) Command was NCQ and ATA_DFLAG_CDL_ENABLED flag set (flag
ATA_DFLAG_CDL_ENABLED will only be set if the Successful NCQ command
sense data supported bit is set); or
2) Command was non-NCQ and regular sense data reporting is enabled.
This means that case 2) will trigger for a non-NCQ command which has
ATA_SENSE bit set, regardless if CDL is enabled or not.
This decision was by design. If the device reports that it has sense data
available, it makes sense to fetch that sense data, since the sk/asc/ascq
could be important information regardless if CDL is enabled or not.
However, the fetching of sense data for a successful command is done via
ATA EH. Considering how intricate the ATA EH is, we really do not want to
invoke ATA EH unless absolutely needed.
Before commit 18bd7718b5 ("scsi: ata: libata: Handle completion of CDL
commands using policy 0xD") we never fetched sense data for successful
commands.
In order to not invoke the ATA EH unless absolutely necessary, even if the
device claims support for sense data reporting, only fetch sense data for
successful (NCQ and non-NCQ commands) commands that are using CDL.
[Damien] Modified the check to test the qc flag ATA_QCFLAG_HAS_CDL
instead of the device support for CDL, which is implied for commands
using CDL.
Fixes: 3ac873c76d ("ata: libata-core: fix when to fetch sense data for successful commands")
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
commit 1e641060c4 ("libata: clear eh_info on reset completion") added
a workaround that broke the retry mechanism in ATA EH.
Tejun himself suggested to remove this workaround when it was identified
to cause additional problems:
https://lore.kernel.org/linux-ide/20110426135027.GI878@htj.dyndns.org/
He even said:
"Hmm... it seems I wasn't thinking straight when I added that work around."
https://lore.kernel.org/linux-ide/20110426155229.GM878@htj.dyndns.org/
While removing the workaround solved the issue, however, the workaround was
kept to avoid "spurious hotplug events during reset", and instead another
workaround was added on top of the existing workaround in commit
8c56cacc72 ("libata: fix unexpectedly frozen port after ata_eh_reset()").
Because these IRQs happened when the port was frozen, we know that they
were actually a side effect of PxIS and IS.IPS(x) not being cleared before
the COMRESET. This is now done in commit 94152042eaa9 ("ata: libahci: clear
pending interrupt status"), so these workarounds can now be removed.
Since commit 1e641060c4 ("libata: clear eh_info on reset completion") has
now been reverted, the ATA EH retry mechanism is functional again, so there
is once again no need to thaw the port more than once in ata_eh_reset().
This reverts "the workaround on top of the workaround" introduced in commit
8c56cacc72 ("libata: fix unexpectedly frozen port after ata_eh_reset()").
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
ata_scsi_port_error_handler() starts off by clearing ATA_PFLAG_EH_PENDING,
before calling ap->ops->error_handler() (without holding the ap->lock).
If an error IRQ is received while ap->ops->error_handler() is running,
the irq handler will set ATA_PFLAG_EH_PENDING.
Once ap->ops->error_handler() returns, ata_scsi_port_error_handler()
checks if ATA_PFLAG_EH_PENDING is set, and if it is, another iteration
of ATA EH is performed.
The problem is that ATA_PFLAG_EH_PENDING is not only cleared by
ata_scsi_port_error_handler(), it is also cleared by ata_eh_reset().
ata_eh_reset() is called by ap->ops->error_handler(). This additional
clearing done by ata_eh_reset() breaks the whole retry logic in
ata_scsi_port_error_handler(). Thus, if an error IRQ is received while
ap->ops->error_handler() is running, the port will currently remain
frozen and will never get re-enabled.
The additional clearing in ata_eh_reset() was introduced in commit
1e641060c4 ("libata: clear eh_info on reset completion").
Looking at the original error report:
https://marc.info/?l=linux-ide&m=124765325828495&w=2
We can see the following happening:
[ 1.074659] ata3: XXX port freeze
[ 1.074700] ata3: XXX hardresetting link, stopping engine
[ 1.074746] ata3: XXX flipping SControl
[ 1.411471] ata3: XXX irq_stat=400040 CONN|PHY
[ 1.411475] ata3: XXX port freeze
[ 1.420049] ata3: XXX starting engine
[ 1.420096] ata3: XXX rc=0, class=1
[ 1.420142] ata3: XXX clearing IRQs for thawing
[ 1.420188] ata3: XXX port thawed
[ 1.420234] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
We are not supposed to be able to receive an error IRQ while the port is
frozen (PxIE is set to 0, i.e. all IRQs for the port are disabled).
AHCI 1.3.1 section 10.7.1.1 First Tier (IS Register) states:
"Each bit location can be thought of as reporting a '1' if the virtual
"interrupt line" for that port is indicating it wishes to generate an
interrupt. That is, if a port has one or more interrupt status bit set,
and the enables for those status bits are set, then this bit shall be set."
Additionally, AHCI state P:ComInit clearly shows that the state machine
will only jump to P:ComInitSetIS (which sets IS.IPS(x) to '1'), if PxIE.PCE
is set to '1'. In our case, PxIE is set to 0, so IS.IPS(x) won't get set.
So IS.IPS(x) only gets set if PxIS and PxIE is set.
AHCI 1.3.1 section 10.7.1.1 First Tier (IS Register) also states:
"The bits in this register are read/write clear. It is set by the level of
the virtual interrupt line being a set, and cleared by a write of '1' from
the software."
So if IS.IPS(x) is set, you need to explicitly clear it by writing a 1 to
IS.IPS(x) for that port.
Since PxIE is cleared, the only way to get an interrupt while the port is
frozen, is if IS.IPS(x) is set, and the only way IS.IPS(x) can be set when
the port is frozen, is if it was set before the port was frozen.
However, since commit 737dd811a3 ("ata: libahci: clear pending interrupt
status"), we clear both PxIS and IS.IPS(x) after freezing the port, but
before the COMRESET, so the problem that commit 1e641060c4 ("libata:
clear eh_info on reset completion") fixed can no longer happen.
Thus, revert commit 1e641060c4 ("libata: clear eh_info on reset
completion"), so that the retry logic in ata_scsi_port_error_handler()
works once again. (The retry logic is still needed, since we can still
get an error IRQ _after_ the port has been thawed, but before
ata_scsi_port_error_handler() takes the ap->lock in order to check
if ATA_PFLAG_EH_PENDING is set.)
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
The ionic device supports a maximum buffer length of 16 bits (see
ionic_rxq_desc or ionic_rxq_sg_elem). When adding new buffers to
the receive rings, the function ionic_rx_fill() uses 16bit math when
calculating the number of pages to allocate for an RX descriptor,
given the interface's MTU setting. If the system PAGE_SIZE >= 64KB,
and the buf_info->page_offset is 0, the remain_len value will never
decrement from the original MTU value and the frag_len value will
always be 0, causing additional pages to be allocated as scatter-
gather elements unnecessarily.
A similar math issue exists in ionic_rx_frags(), but no failures
have been observed here since a 64KB page should not normally
require any scatter-gather elements at any legal Ethernet MTU size.
Fixes: 4b0a7539a3 ("ionic: implement Rx page reuse")
Signed-off-by: David Christensen <drc@linux.vnet.ibm.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov says:
====================
The following pull-request contains BPF updates for your *net* tree.
We've added 21 non-merge commits during the last 8 day(s) which contain
a total of 21 files changed, 450 insertions(+), 36 deletions(-).
The main changes are:
1) Adjust bpf_mem_alloc buckets to match ksize(), from Hou Tao.
2) Check whether override is allowed in kprobe mult, from Jiri Olsa.
3) Fix btf_id symbol generation with ld.lld, from Jiri and Nick.
4) Fix potential deadlock when using queue and stack maps from NMI, from Toke Høiland-Jørgensen.
Please consider pulling these changes from:
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf.git
Thanks a lot!
Also thanks to reporters, reviewers and testers of commits in this pull-request:
Alan Maguire, Biju Das, Björn Töpel, Dan Carpenter, Daniel Borkmann,
Eduard Zingerman, Hsin-Wei Hung, Marcus Seyfarth, Nathan Chancellor,
Satya Durga Srinivasu Prabhala, Song Liu, Stephen Rothwell
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
