Add SPDX license identifiers to all files which:
- Have no license information of any form
- Have MODULE_LICENCE("GPL*") inside which was used in the initial
scan/conversion to ignore the file
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, when booting a kernel with DMI support on a platform that has
no DMI tables, the following output is emitted into the kernel log:
[ 0.128818] DMI not present or invalid.
...
[ 1.306659] dmi: Firmware registration failed.
...
[ 2.908681] dmi-sysfs: dmi entry is absent.
The first one is a pr_info(), but the subsequent ones are pr_err()s that
complain about a condition that is not really an error to begin with.
So let's clean this up, and give up silently if dma_available is not set.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Martin Hundebøll <mnhu@prevas.dk>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
The ioremap() function is intended for mapping MMIO. For RAM, the
memremap() function should be used. Convert calls from ioremap() to
memremap() when re-mapping RAM.
This will be used later by SME to control how the encryption mask is
applied to memory mappings, with certain memory locations being mapped
decrypted vs encrypted.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Larry Woodman <lwoodman@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Toshimitsu Kani <toshi.kani@hpe.com>
Cc: kasan-dev@googlegroups.com
Cc: kvm@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Cc: linux-doc@vger.kernel.org
Cc: linux-efi@vger.kernel.org
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/b13fccb9abbd547a7eef7b1fdfc223431b211c88.1500319216.git.thomas.lendacky@amd.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Some utils, like dmidecode and smbios, need to access SMBIOS entry
table area in order to get information like SMBIOS version, size, etc.
Currently it's done via /dev/mem. But for situation when /dev/mem
usage is disabled, the utils have to use dmi sysfs instead, which
doesn't represent SMBIOS entry and adds code/delay redundancy when direct
access for table is needed.
So this patch creates dmi/tables and adds SMBIOS entry point to allow
utils in question to work correctly without /dev/mem. Also patch adds
raw dmi table to simplify dmi table processing in user space, as
proposed by Jean Delvare.
Tested-by: Roy Franz <roy.franz@linaro.org>
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@globallogic.com>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
With CONFIG_DEBUG_KOBJECT_RELEASE=y, removing and immediately reloading the
dmi-sysfs module causes the following warning:
sysfs: cannot create duplicate filename '/firmware/dmi'
kobject_add_internal failed for dmi with -EEXIST, don't try to register things with the same name in the same directory.
The "dmi" directory stays in sysfs until the dmi_kobj is released, and
DEBUG_KOBJECT_RELEASE delays that.
I don't think we can hit this problem in normal usage because dmi_kobj is
static and nothing outside dmi-sysfs can get a reference to it, so the
only way to delay the "dmi" release is with DEBUG_KOBJECT_RELEASE.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Removing the dmi-sysfs module causes the following warning:
# modprobe -r dmi_sysfs
WARNING: CPU: 11 PID: 6785 at fs/sysfs/inode.c:325 sysfs_hash_and_remove+0xa9/0xb0()
sysfs: can not remove 'raw', no directory
This is because putting the entry kobject, e.g., for
"/sys/firmware/dmi/entries/19-0", removes the directory and all its
contents. By the time dmi_sysfs_entry_release() runs, the "raw" file
inside ".../19-0/" has already been removed.
Therefore, we don't need to remove the "raw" bin file at all in
dmi_sysfs_entry_release().
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
DMI entries are arranged in memory back to back with no alignment
guarantees. This means that the struct dmi_header passed to callbacks
from dmi_walk() itself isn't byte aligned. This causes problems on
architectures that expect aligned data, such as IA64.
The dmi-sysfs patchset introduced structure member accesses through this
passed in dmi_header. Fix this by memcpy()ing the structures to
temporary locations on stack when inspecting/copying them.
Signed-off-by: Mike Waychison <mikew@google.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The System Event Log described by DMI entry type 15 may be backed by
either memory or may be indirectly accessed via an IO index/data
register pair.
In order to get read access to this log, expose it in the
"system_event_log" sub-directory of type 15 DMI entries, ie:
/sys/firmware/dmi/entries/15-0/system_event_log/raw_event_log.
This commit handles both IO accessed and memory access system event
logs. OEM specific access and GPNV support is explicitly not handled
and we error out in the logs when we do not recognize the access method.
Signed-off-by: Mike Waychison <mikew@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The optional type 15 entry of the DMI table describes a non-volatile
storage-backed system event log.
In preparation for the next commit which exposes the raw bits of the
event log to userland, create a new sub-directory within the dmi entry
called "system_event_log" and expose attribute files that describe the
event log itself.
Currently, only a single child object is permitted within a
dmi_sysfs_entry. We simply point at this child from the dmi_sysfs_entry
if it exists.
Signed-off-by: Mike Waychison <mikew@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Introduce a new module "dmi-sysfs" that exports the broken out entries
of the DMI table through sysfs.
Entries are enumerated via dmi_walk() on module load, and are populated
as kobjects rooted at /sys/firmware/dmi/entries.
Entries are named "<type>-<instance>", where:
<type> : is the type of the entry, and
<instance> : is the ordinal count within the DMI table of that
entry type. This instance is used in lieu the DMI
entry's handle as no assurances are made by the kernel
that handles are unique.
All entries export the following attributes:
length : The length of the formatted portion of the entry
handle : The handle given to this entry by the firmware
raw : The raw bytes of the entire entry, including the
formatted portion, the unformatted (strings) portion,
and the two terminating nul characters.
type : The DMI entry type
instance : The ordinal instance of this entry given its type.
position : The position ordinal of the entry within the table in
its entirety.
Entries in dmi-sysfs are kobject backed members called "struct
dmi_sysfs_entry" and belong to dmi_kset. They are threaded through
entry_list (protected by entry_list_lock) so that we can find them at
cleanup time.
Signed-off-by: Mike Waychison <mikew@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
