Unfortunately details of USB HID transport bled into HID core and
handling of numbered/unnumbered reports is quite a mess, with
hid_report_len() calculating the length according to USB rules,
and hid_hw_raw_request() adding report ID to the buffer for both
numbered and unnumbered reports.
Untangling it all requres a lot of changes in HID, so for now let's
handle this in the driver.
[jkosina@suse.cz: microoptimize field->report->id to report->id]
Fixes: 14c9c014ba ("HID: add vivaldi HID driver")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Tested-by: Stephen Boyd <swboyd@chromium.org> # CoachZ
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Battery status on Elan tablet driver is reported for the HP ENVY x360
15t-dr100. There is no separate battery for the Elan controller resulting in a
battery level report of 0% or 1% depending on whether a stylus has interacted
with the screen. These low battery level reports causes a variety of bad
behavior in desktop environments. This patch adds the appropriate quirk to
indicate that the batery status is unused for this target.
Cc: stable@vger.kernel.org
Signed-off-by: Karl Kurbjun <kkurbjun@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
- support for USI style pens (Tero Kristo, Mika Westerberg)
- quirk for devices that need inverted X/Y axes (Alistair Francis)
- small core code cleanups and deduplication (Benjamin Tissoires)
If the timer introduced by the commit below is started, then it must be
deleted in the error handling of the probe. Otherwise it would trigger
once the driver is no more.
Fixes: 0b91b4e4da ("HID: magicmouse: Report battery level over USB")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Tested-by: José Expósito <jose.exposito89@gmail.com>
Reported-by: <syzbot+a437546ec71b04dfb5ac@syzkaller.appspotmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This function had kernel-doc that not used a hash to separate
the function name from the one line description.
The warning was found by running scripts/kernel-doc, which is
caused by using 'make W=1'.
drivers/hid/intel-ish-hid/ishtp-fw-loader.c:271: warning: This comment
starts with '/**', but isn't a kernel-doc comment. Refer
Documentation/doc-guide/kernel-doc.rst
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Specify that both TGL and ADL don't support DMA cache snooping.
Signed-off-by: Ye Xiang <xiang.ye@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The function performs a check on the hdev input parameters, however, it
is used before the check.
Initialize the udev variable after the sanity check to avoid a
possible NULL pointer dereference.
Fixes: 9614219e93 ("HID: uclogic: Extract tablet parameter discovery into a module")
Addresses-Coverity-ID: 1443763 ("Null pointer dereference")
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The function performs a check on its input parameters, however, the
hdev parameter is used before the check.
Initialize the stack variables after checking the input parameters to
avoid a possible NULL pointer dereference.
Fixes: 9614219e93 ("HID: uclogic: Extract tablet parameter discovery into a module")
Addresses-Coverity-ID: 1443804 ("Null pointer dereference")
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The function performs a check on the hdev input parameters, however, it
is used before the check.
Initialize the udev variable after the sanity check to avoid a
possible NULL pointer dereference.
Fixes: 9614219e93 ("HID: uclogic: Extract tablet parameter discovery into a module")
Addresses-Coverity-ID: 1443827 ("Null pointer dereference")
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The function performs a check on its input parameters, however, the
hdev parameter is used before the check.
Initialize the stack variables after checking the input parameters to
avoid a possible NULL pointer dereference.
Fixes: 9614219e93 ("HID: uclogic: Extract tablet parameter discovery into a module")
Addresses-Coverity-ID: 1443831 ("Null pointer dereference")
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add a new driver for the LetSketch / VSON WP9620N drawing tablet. This
drawing tablet is also sold under other brand names such as Case U,
presumably this driver will work for all of them. But it has only been
tested with a LetSketch WP9620N model.
These tablets also work without a special HID driver, but then only
part of the active area works and both the pad and stylus buttons are
hardwired to special key-combos. E.g. the 2 stylus buttons send right
mouse clicks / resp. "e" key presses.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=2005575
BugLink: https://github.com/DIGImend/digimend-kernel-drivers/issues/528
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Use the function key table introduced for the Magic Keyboard 2021
without fingerprint reader in the models with fingerprint reader and/or
numpad.
Tested with the ANSI variant of the keyboard with and without numpad.
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The new 2021 apple models have a different FN key assignment. Add a new
translation table and use that for the 2021 magic keyboard.
Signed-off-by: Benjamin Berg <bberg@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Apple Magic Trackpad 2021 (3rd generation) has the same product ID
as the 2nd generation. However, when connected through Bluetooth, the
version has changed from 0x107 to 0x110.
The other meaningful change is that the name has dropped the generation
number and now it is just "Apple Inc. Magic Trackpad", like the first
generation model.
Set the device name correctly to ensure the same driver settings are
loaded, whether connected via Bluetooth or USB.
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
If the Apple Magic Trackpad 2 has been connected to a Mac, the name
is automatically personalized showing its owner name. For example:
"José Expósito's Trackpad".
When connected through Bluetooth, the personalized name is reported,
however, when connected through USB the generic name is reported.
Set the device name correctly to ensure the same driver settings are
loaded, whether connected via Bluetooth or USB.
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Allow the touchscreen-inverted-x/y device tree properties to control the
HID_QUIRK_X_INVERT/HID_QUIRK_Y_INVERT quirks for the hid-input device.
Signed-off-by: Alistair Francis <alistair@alistair23.me>
Acked-by: Rob Herring <robh@kernel.org>
[bentiss: silence checkpatch warnings]
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20211208124045.61815-3-alistair@alistair23.me
Add a HID_QUIRK_X_INVERT/HID_QUIRK_Y_INVERT quirk that can be used
to invert the X/Y values.
Signed-off-by: Alistair Francis <alistair@alistair23.me>
[bentiss: silence checkpatch warning]
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20211208124045.61815-2-alistair@alistair23.me
Currently, the table that stores information about the connected hidraw
devices has a mutex to prevent concurrent hidraw users to manipulate the
hidraw table (e.g. delete an entry) while someone is trying to use
the table (e.g. issuing an ioctl to the device), preventing the kernel
to referencing a NULL pointer. However, since that every user that wants
to access the table for both manipulating it and reading it content,
this prevents concurrent access to the table for read-only operations
for different or the same device (e.g. two hidraw ioctls can't happen at
the same time, even if they are completely unrelated).
This proves to be a bottleneck and gives performance issues when using
multiple HID devices at same time, like VR kits where one can have two
controllers, the headset and some tracking sensors.
To improve the performance, replace the table mutex with a read-write
semaphore, enabling multiple threads to issue parallel syscalls to
multiple devices at the same time while protecting the table for
concurrent modifications.
Signed-off-by: André Almeida <andrealmeid@collabora.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20211130132957.8480-2-andrealmeid@collabora.com
Fix the following coccicheck REVIEW:
Use swap() instead of reimplementing it.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: chiminghao <chi.minghao@zte.com.cn>
[bentiss: rewrote commit title]
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20211109082610.131341-1-chi.minghao@zte.com.cn
Add USI defined usages to the HID debug code.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Tero Kristo <tero.kristo@linux.intel.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20211210111138.1248187-6-tero.kristo@linux.intel.com
This function is not called outside of hid-input.c so we can make it
static.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Tero Kristo <tero.kristo@linux.intel.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20211210111138.1248187-5-tero.kristo@linux.intel.com
This and HID_DG_STYLUS are pretty much the same thing so add suffix for
HID_DG_PEN too. This makes the input device name look better.
While doing this, remove the suffix override from hid-multitouch, as it
is now handled by hid-input. Also, the suffix override done by
hid-multitouch was wrong, as it mapped HID_DG_PEN => "Stylus" and
HID_DG_STYLUS => "Pen".
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Tero Kristo <tero.kristo@linux.intel.com>
[bentiss: amended to keep the same name for hid-multitouch devices]
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20211210111138.1248187-3-tero.kristo@linux.intel.com
Since we are going to have more MSC events too, add map_msc() that can
be used to fill in necessary fields and avoid boilerplate code.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Tero Kristo <tero.kristo@linux.intel.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20211210111138.1248187-2-tero.kristo@linux.intel.com
Battery status is reported for the Asus UX550VE touchscreen even though
it does not have a battery. Prevent it from always reporting the
battery as low.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1897823
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Fixes spurious wakeups from s0ix on Lenovo ThinkPad X1 Cargon Gen 9 on
lid close.
These wakeups are generated by interrupts from the ISH on changes to the
lid status.
By disabling the wake IRQ from the ISH we inhibit these spurious
wakeups while keeping the resume from LID open through the ACPI
interrupt.
Reports on the Lenovo forums indicate that Lenovo ThinkPad X1 Yoga Gen6
is also affected.
Fixes: ae02e5d40d ("HID: intel-ish-hid: ipc layer")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214855
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20211130060117.3026-1-linux@weissschuh.net
The prodikeys HID driver only controls USB devices, yet did not have a
dependancy on USB_HID. This causes build errors on some configurations
like nios2 when building due to new changes to the prodikeys driver.
Reported-by: kernel test robot <lkp@intel.com>
Cc: stable@vger.kernel.org
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20211203081231.2856936-1-gregkh@linuxfoundation.org
The chicony HID driver only controls USB devices, yet did not have a
dependancy on USB_HID. This causes build errors on some configurations
like sparc when building due to new changes to the chicony driver.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: stable@vger.kernel.org
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20211203075927.2829218-1-gregkh@linuxfoundation.org
We don't gain much by having them as inline, and it
actually prevents us to attach a probe to those helpers.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20211202095334.14399-5-benjamin.tissoires@redhat.com
There is a lot of duplication of code in the HID low level drivers.
Better have everything in one place so we can eventually extend it
in a generic way.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20211202095334.14399-4-benjamin.tissoires@redhat.com
When the setup of the GHL fails, we are not calling hid_hw_stop().
This leads to the hidraw node not being released, meaning a crash
whenever somebody attempts to open the file.
Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20211202095334.14399-2-benjamin.tissoires@redhat.com
Some HID drivers are only for USB drivers, yet did not depend on
CONFIG_USB_HID. This was hidden by the fact that the USB functions were
stubbed out in the past, but now that drivers are checking for USB
devices properly, build errors can occur with some random
configurations.
Reported-by: kernel test robot <lkp@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20211202114819.2511954-1-gregkh@linuxfoundation.org
Many HID drivers assume that the HID device assigned to them is a USB
device as that was the only way HID devices used to be able to be
created in Linux. However, with the additional ways that HID devices
can be created for many different bus types, that is no longer true, so
properly check that we have a USB device associated with the HID device
before allowing a driver that makes this assumption to claim it.
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: Michael Zaidman <michael.zaidman@gmail.com>
Cc: Stefan Achatz <erazor_de@users.sourceforge.net>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: linux-input@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
[bentiss: amended for thrustmater.c hunk to apply]
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20211201183503.2373082-3-gregkh@linuxfoundation.org
The wacom driver accepts devices of more than just USB types, but some
code paths can cause problems if the device being controlled is not a
USB device due to a lack of checking. Add the needed checks to ensure
that the USB device accesses are only happening on a "real" USB device,
and not one on some other bus.
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: linux-input@vger.kernel.org
Cc: stable@vger.kernel.org
Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20211201183503.2373082-2-gregkh@linuxfoundation.org
A number of HID drivers already call hid_is_using_ll_driver() but only
for the detection of if this is a USB device or not. Make this more
obvious by creating hid_is_usb() and calling the function that way.
Also converts the existing hid_is_using_ll_driver() functions to use the
new call.
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: linux-input@vger.kernel.org
Cc: stable@vger.kernel.org
Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20211201183503.2373082-1-gregkh@linuxfoundation.org
Add a HID_QUIRK_NO_INIT_REPORTS quirk for the
Microsoft Surface 3 (non pro) type-cover.
Trying to init the reports seems to confuse the type-cover and
causes 2 issues:
1. Despite hid-multitouch sending the command to switch the
touchpad to multitouch mode, it keeps sending events on the
mouse emulation interface.
2. The touchpad completely stops sending events after a reboot.
Adding the HID_QUIRK_NO_INIT_REPORTS quirk fixes both issues.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
When connected over USB, the Apple Magic Keyboard 2015 registers 3
different interfaces. One of them is used to report the battery level.
However, unlike when connected over Bluetooth, the battery level is not
reported automatically and it is required to fetch it manually.
Add a new quirk to fix the battery report descriptor and a timer to
fetch the battery level.
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Replace the existing quirk hardcoded values with the BIT macro in order
to simplify including new quirks.
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
When a keyboard without a function key is detected, instead of removing
all quirks, remove only the APPLE_HAS_FN quirk.
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
When connected over USB, the Apple Magic Mouse 2 and the Apple Magic
Trackpad 2 register multiple interfaces, one of them is used to report
the battery level.
However, unlike when connected over Bluetooth, the battery level is not
reported automatically and it is required to fetch it manually.
Fix the battery report descriptor and add a timer to fetch the battery
level.
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Iiyama ProLite T1931SAW does not work with Linux - input devices are
created but cursor does not move.
It has the infamous 0eef:0001 ID which has been reused for various
devices before.
It seems to require export_all_inputs = true.
Hopefully there are no HID devices using this ID that will break.
It should not break non-HID devices (handled by usbtouchscreen).
Signed-off-by: Ondrej Zary <linux@zary.sk>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The rumbling-related identifiers are never used in !CONFIG_NINTENDO_FF
case, so let's hide them in order to avoid unused warnings.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
In hid_magicmouse, if the user has set scroll_speed to a value between
55 and 63 and scrolls seven times in quick succession, the
step_hr variable in the magicmouse_emit_touch function becomes 0.
That causes a division by zero further down in the function when
it does `step_x_hr /= step_hr`.
To reproduce, create `/etc/modprobe.d/hid_magicmouse.conf` with the
following content:
```
options hid_magicmouse scroll_acceleration=1 scroll_speed=55
```
Then reboot, connect a Magic Mouse and scroll seven times quickly.
The system will freeze for a minute, and after that `dmesg` will
confirm that a division by zero occurred.
Enforce a minimum of 1 for the variable so the high resolution
step count can never reach 0 even at maximum scroll acceleration.
Fixes: d4b9f10a0e ("HID: magicmouse: enable high-resolution scroll")
Signed-off-by: Claudia Pellegrino <linux@cpellegrino.de>
Tested-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Changed 0 to NULL to fix following sparse warnings:
drivers/hid/hid-thrustmaster.c:208:43: warning: Using plain integer as NULL pointer
drivers/hid/hid-thrustmaster.c:241:17: warning: Using plain integer as NULL pointer
drivers/hid/hid-thrustmaster.c:275:37: warning: Using plain integer as NULL pointer
Signed-off-by: Vihas Mak <makvihas@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Battery status is reported for the HP Envy X360 Convertible 15-eu0xxx
even if it does not have a battery. Prevent it from always reporting the
battery as low.
Signed-off-by: Trevor Davenport <trevor.davenport@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The i2c-hid driver generally supports wakeup, bit it currently
doesn't report wakeup events to the PM subsystem. Change that.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
When a scancode is manually remapped that previously was not handled as
key, then the old usage type was incorrectly reused.
This caused issues on a "04b3:301b IBM Corp. SK-8815 Keyboard" which has
marked some of its keys with an invalid HID usage. These invalid usage
keys are being ignored since support for USB programmable buttons was
added.
The scancodes are however remapped explicitly by the systemd hwdb to the
keycodes that are printed on the physical buttons. During this mapping
step the existing usage is retrieved which will be found with a default
type of 0 (EV_SYN) instead of EV_KEY.
The events with the correct code but EV_SYN type are not forwarded to
userspace.
This also leads to a kernel oops when trying to print the report descriptor
via debugfs. hid_resolv_event() tries to resolve a EV_SYN event with an
EV_KEY code which leads to an out-of-bounds access in the EV_SYN names
array.
Fixes: bcfa8d1457 ("HID: input: Add support for Programmable Buttons")
Fixes: f5854fad39 ("Input: hid-input - allow mapping unknown usages")
Reported-by: Brent Roman <brent@mbari.org>
Tested-by: Brent Roman <brent@mbari.org>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Fix parsing of HID_CP_CONSUMER_CONTROL fields which are not in
the HID_CP_PROGRAMMABLEBUTTONS collection.
Fixes: bcfa8d1457 ("HID: input: Add support for Programmable Buttons")
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=2018096
Cc: Thomas Weißschuh <linux@weissschuh.net>
Suggested-by: Benjamin Tissoires <btissoir@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-By: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This reverts commit 2ea5999d07.
As Dmitry Torokhov pointed out, the previous code (KEY_DISPLAY_OFF) is
actually correct. The real issue is that current desktop environments
don't deal it properly. Mapping it to another event does not solve the
issue.
So I'm reverting that change, keeping key 0x35 mapped to KEY_DISPLAY_OFF
Signed-off-by: Vinícius Angiolucci Reis <angiolucci@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
A late addititon to the intel-ish-hid framework caused a build failure
with clang, and introduced an ABI to the module loader that stops working
if any driver ever needs to bind to more than one UUID:
drivers/hid/intel-ish-hid/ishtp-fw-loader.c:1067:4: error: initializer element is not a compile-time constant
Change the ishtp_device_id to have correct documentation and a driver_data
field like all the other ones, and change the drivers to use the ID table
as the primary identification in a way that works with all compilers
and avoids duplciating the identifiers.
Fixes: f155dfeaa4 ("platform/x86: isthp_eclite: only load for matching devices")
Fixes: facfe0a4fd ("platform/chrome: chros_ec_ishtp: only load for matching devices")
Fixes: 0d0cccc0fd ("HID: intel-ish-hid: hid-client: only load for matching devices")
Fixes: 44e2a58cb8 ("HID: intel-ish-hid: fw-loader: only load for matching devices")
Fixes: cb1a2c6847 ("HID: intel-ish-hid: use constants for modaliases")
Fixes: fa443bc3c1 ("HID: intel-ish-hid: add support for MODULE_DEVICE_TABLE()")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
[jkosina@suse.cz: fix ecl_ishtp_cl_driver.id initialization]
[jkosina@suse.cz: fix conflict with already fixed kerneldoc]
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The HID descriptor of many of Wacom's touch input devices include a
"Confidence" usage that signals if a particular touch collection contains
useful data. The driver does not look at this flag, however, which causes
even invalid contacts to be reported to userspace. A lucky combination of
kernel event filtering and device behavior (specifically: contact ID 0 ==
invalid, contact ID >0 == valid; and order all data so that all valid
contacts are reported before any invalid contacts) spare most devices from
any visibly-bad behavior.
The DTH-2452 is one example of an unlucky device that misbehaves. It uses
ID 0 for both the first valid contact and all invalid contacts. Because
we report both the valid and invalid contacts, the kernel reports that
contact 0 first goes down (valid) and then goes up (invalid) in every
report. This causes ~100 clicks per second simply by touching the screen.
This patch inroduces new `confidence` flag in our `hid_data` structure.
The value is initially set to `true` at the start of a report and can be
set to `false` if an invalid touch usage is seen.
Link: https://github.com/linuxwacom/input-wacom/issues/270
Fixes: f8b6a74719 ("HID: wacom: generic: Support multiple tools per report")
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Tested-by: Joshua Dickens <joshua.dickens@wacom.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
These two error paths need to drop the lock before returning.
Fixes: c5e6267695 ("HID: nintendo: add player led support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Previously it was loaded for all ISHTP devices.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Previously it was loaded for all ISHTP devices.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Pull HID updates from Jiri Kosina:
- support for Nintendo Switch Pro Controllers and Joy-Cons (Daniel J.
Ogorchock)
- support for new revision of the NitroKey U2F device firmware (Andrej
Shadura)
- LED handling improvements for Sony Playstation5 controllers (Roderick
Colenbrander)
- support for Apple 2021 Magic Keyboard (Alex Henrie)
- other assorted code cleanups and new device ID additions
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (41 commits)
HID: nintendo: fix -Werror build
HID: playstation: require multicolor LED functionality
HID: u2fzero: properly handle timeouts in usb_submit_urb
HID: u2fzero: clarify error check and length calculations
HID: u2fzero: Support NitroKey U2F revision of the device
HID: wacom: Make use of the helper function devm_add_action_or_reset()
HID: wacom: Shrink critical section in `wacom_add_shared_data`
HID: nintendo: prevent needless queueing of the rumble worker
HID: nintendo: ratelimit subcommands and rumble
HID: nintendo: improve rumble performance and stability
HID: nintendo: add IMU support
HID: nintendo: add support for reading user calibration
HID: nintendo: add support for charging grip
HID: nintendo: set controller uniq to MAC
HID: nintendo: reduce device removal subcommand errors
HID: nintendo: patch hw version for userspace HID mappings
HID: nintendo: send subcommands after receiving input report
HID: nintendo: improve subcommand reliability
HID: nintendo: add rumble support
HID: nintendo: add home led support
...
Highlights:
- AMD-PMC S0ix support fixes and improvements
- HP-WMI support for Omen laptops
- New nvidia-wmi-ec-backlight driver
- New Intel ISH ECLITE driver
- WMI core cleanups
- Support for various new Melanox platforms
- System76 Laptop support improvements
- Surface Laptop Studio support and initial Surface Pro 8 support
- Various other small fixes and hardware-id additions
The following is an automated git shortlog grouped by driver:
ABI:
- sysfs-platform-intel-pmc: add blank lines to make it valid for ReST
- sysfs-platform-dell-privacy-wmi: correct ABI entries
ASoC:
- Intel: Move soc_intel_is_foo() helpers to a generic header
Add Intel ishtp eclite driver:
- Add Intel ishtp eclite driver
Add driver for ACPI WMAA EC-based backlight control:
- Add driver for ACPI WMAA EC-based backlight control
Documentation/ABI:
- Add new line card attributes for mlxreg-io sysfs interfaces
- Add new attributes for mlxreg-io sysfs interfaces
HID:
- surface-hid: Allow driver matching for target ID 1 devices
- surface-hid: Use correct event registry for managing HID events
Input:
- axp20x-pek - Use new soc_intel_is_cht() helper
Remove "WMAA" from identifier names in wmaa-backlight-wmi.c:
- Remove "WMAA" from identifier names in wmaa-backlight-wmi.c
Rename wmaa-backlight-wmi to nvidia-wmi-ec-backlight:
- Rename wmaa-backlight-wmi to nvidia-wmi-ec-backlight
Support for EC-connected GPIOs for identify LED/button on Barco P50 board:
- Support for EC-connected GPIOs for identify LED/button on Barco P50 board
acer-wmi:
- use __packed instead of __attribute__((packed))
amd-pmc:
- Drop check for valid alarm time
- Downgrade dev_info message to dev_dbg
- fix compilation without CONFIG_RTC_SYSTOHC_DEVICE
- Add special handling for timer based S0i3 wakeup
- adjust arguments for `amd_pmc_send_cmd`
- Add alternative acpi id for PMC controller
- Add a message to print resume time info
- Send command to dump data after clearing OS_HINT
- Fix compilation when CONFIG_DEBUGFS is disabled
- Export Idlemask values based on the APU
- Check s0i3 cycle status
- Increase the response register timeout
asus-wmi:
- rename platform_profile_* function symbols
barco-p50-gpio:
- use KEY_VENDOR for button instead of KEY_RESTART
dell:
- Make DELL_WMI_PRIVACY depend on DELL_WMI
- fix DELL_WMI_PRIVACY dependencies & build error
dell-wmi:
- Recognise or support new switches
docs:
- ABI: fix documentation warning in sysfs-driver-mlxreg-io
gigabyte-wmi:
- add support for B550 AORUS ELITE AX V2
- add support for B550I Aorus Pro AX
hp-wmi:
- rename platform_profile_* function symbols
- add support for omen laptops
ideapad-laptop:
- Add platform support for Ideapad 5 Pro 16ACH6-82L5
int1092:
- Fix non sequential device mode handling
intel_int0002_vgpio:
- Use the new soc_intel_is_byt()/_cht() helpers
intel_scu_ipc:
- Update timeout value in comment
- Increase virtual timeout to 10s
- Fix busy loop expiry time
intel_skl_int3472:
- Correct null check
lg-laptop:
- replace snprintf in show functions with sysfs_emit
- Correctly handle dmi_get_system_info() returning NULL
mlx-platform:
- Add support for new system SGN2410
- Add BIOS attributes for CoffeeLake COMEx based systems
- Extend FAN and LED configuration to support new MQM97xx systems
- Add support for multiply cooling devices
- Configure notifier callbacks for modular system
- Add initial support for new modular system
panasonic-laptop:
- Replace snprintf in show functions with sysfs_emit
platform:
- x86: ideapad-laptop: Use ACPI_COMPANION() directly
- lg-laptop: drop unneeded MODULE_ALIAS
platform/mellanox:
- mlxreg-lc: Add initial support for Nvidia line card devices
- mlxreg-io: Extend number of hwmon attributes
- mlxreg-hotplug: Extend logic for hotplug devices operations
- mlxreg-io: Fix read access of n-bytes size attributes
- mlxreg-io: Fix argument base in kstrtou32() call
platform/surface:
- aggregator_registry: Add initial support for Surface Pro 8
- aggregator_registry: Add support for Surface Laptop Studio
- gpe: Add support for Surface Laptop Studio
platform/x86/intel:
- hid: Add DMI switches allow list
- punit_ipc: Drop wrong use of ACPI_PTR()
platform_data/mlxreg:
- Add new field for secured access
- Add new type to support modular systems
sony-laptop:
- replace snprintf in show functions with sysfs_emit
surface:
- surface3_power: Drop redundant acpi_bus_get_device() call
- surface3-wmi: Use ACPI_COMPANION() directly
system76_acpi:
- Fix input device error handling
- fix Kconfig dependencies
- Add attribute group for kb_led_color
- Add battery charging thresholds
- Replace Fn+F2 function for OLED models
- Report temperature and fan speed
thinkpad_acpi:
- Fix bitwise vs. logical warning
- Fix coccinelle warnings
- Switch to common use of attributes
touchscreen_dmi:
- Add info for the Viglen Connect 10 tablet
- Update info for the Chuwi Hi10 Plus (CWI527) tablet
- Add info for the Chuwi HiBook (CWI514) tablet
update email addresses. Change all email addresses for Mark Gross to use markgross@kernel.org.:
- update email addresses. Change all email addresses for Mark Gross to use markgross@kernel.org.
wmi:
- change notification handler type
- more detailed error reporting in find_guid()
- introduce helper to retrieve event data
- introduce helper to determine type
- introduce helper to generate method names
- introduce helper to convert driver to WMI driver
- simplify error handling logic
- do not fail if disabling fails
- improve debug messages
- align arguments of functions
- move variables
- remove variable
- use sizeof(*p) in allocation
- use !p to check for NULL
- use sysfs_emit()
- make GUID block packed
- use guid_t and guid_equal()
- use bool instead of int
- use BIT() macro
- remove unnecessary checks
- remove stray empty line
- remove unnecessary casts
- remove unnecessary argument
- remove unnecessary variable
- remove unnecessary initializations
- remove unnecessary initialization
- remove commas
- fix checkpatch warnings
- fix kernel doc
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmGBVW0UHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9xufQgAnheynzaOChdXasbvR//mv+lyGE49
76uRA9HF9SeP430B+MTkZuYhEIiiY7lKjHi7ZY15HPY0r6wrrbJn+zDBpXFo3Scy
6CC/KUNNkwZgy1KoDC0v1SynlkHZgS4F98S1/IKkcBDQH91N0VltLFKuYYiPw2Hp
APMmQUxGGxdmBlxyKOZnFK5BicNCzGL9klkU2evQmywICx3ZT3Q9jQ1YIoiw85O+
sH7Owt3jIpWVbhb6TcPupuKw4LP6hqa8z9yYLchGaJQFyr1RXTznmLAB7foKRCJ/
48jGgjlHF2OkrLiOvT8hFMqpU52VjVUr0fBGyRjWb7dIpt5Fp1M2HLlRXA==
=cpVa
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
"Highlights:
- AMD-PMC S0ix support fixes and improvements
- HP-WMI support for Omen laptops
- New nvidia-wmi-ec-backlight driver
- New Intel ISH ECLITE driver
- WMI core cleanups
- Support for various new Melanox platforms
- System76 Laptop support improvements
- Surface Laptop Studio support and initial Surface Pro 8 support
- Various other small fixes and hardware-id additions"
* tag 'platform-drivers-x86-v5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (106 commits)
platform/x86: system76_acpi: Fix input device error handling
platform/x86: touchscreen_dmi: Add info for the Viglen Connect 10 tablet
platform/surface: aggregator_registry: Add initial support for Surface Pro 8
platform/x86: mlx-platform: Add support for new system SGN2410
platform/x86: mlx-platform: Add BIOS attributes for CoffeeLake COMEx based systems
platform/x86: mlx-platform: Extend FAN and LED configuration to support new MQM97xx systems
platform/x86: asus-wmi: rename platform_profile_* function symbols
platform/x86: hp-wmi: rename platform_profile_* function symbols
platform/x86: amd-pmc: Drop check for valid alarm time
platform/x86: amd-pmc: Downgrade dev_info message to dev_dbg
platform/x86: amd-pmc: fix compilation without CONFIG_RTC_SYSTOHC_DEVICE
platform/x86: system76_acpi: fix Kconfig dependencies
platform/x86: barco-p50-gpio: use KEY_VENDOR for button instead of KEY_RESTART
platform/x86: sony-laptop: replace snprintf in show functions with sysfs_emit
platform/x86: lg-laptop: replace snprintf in show functions with sysfs_emit
docs: ABI: fix documentation warning in sysfs-driver-mlxreg-io
platform/x86: wmi: change notification handler type
HID: surface-hid: Allow driver matching for target ID 1 devices
HID: surface-hid: Use correct event registry for managing HID events
platform/surface: aggregator_registry: Add support for Surface Laptop Studio
...
The end goal of the current buffer overflow detection work[0] is to gain
full compile-time and run-time coverage of all detectable buffer overflows
seen via array indexing or memcpy(), memmove(), and memset(). The str*()
family of functions already have full coverage.
While much of the work for these changes have been on-going for many
releases (i.e. 0-element and 1-element array replacements, as well as
avoiding false positives and fixing discovered overflows[1]), this series
contains the foundational elements of several related buffer overflow
detection improvements by providing new common helpers and FORTIFY_SOURCE
changes needed to gain the introspection required for compiler visibility
into array sizes. Also included are a handful of already Acked instances
using the helpers (or related clean-ups), with many more waiting at the
ready to be taken via subsystem-specific trees[2]. The new helpers are:
- struct_group() for gaining struct member range introspection.
- memset_after() and memset_startat() for clearing to the end of structures.
- DECLARE_FLEX_ARRAY() for using flex arrays in unions or alone in structs.
Also included is the beginning of the refactoring of FORTIFY_SOURCE to
support memcpy() introspection, fix missing and regressed coverage under
GCC, and to prepare to fix the currently broken Clang support. Finishing
this work is part of the larger series[0], but depends on all the false
positives and buffer overflow bug fixes to have landed already and those
that depend on this series to land.
As part of the FORTIFY_SOURCE refactoring, a set of both a compile-time
and run-time tests are added for FORTIFY_SOURCE and the mem*()-family
functions respectively. The compile time tests have found a legitimate
(though corner-case) bug[6] already.
Please note that the appearance of "panic" and "BUG" in the
FORTIFY_SOURCE refactoring are the result of relocating existing code,
and no new use of those code-paths are expected nor desired.
Finally, there are two tree-wide conversions for 0-element arrays and
flexible array unions to gain sane compiler introspection coverage that
result in no known object code differences.
After this series (and the changes that have now landed via netdev
and usb), we are very close to finally being able to build with
-Warray-bounds and -Wzero-length-bounds. However, due corner cases in
GCC[3] and Clang[4], I have not included the last two patches that turn
on these options, as I don't want to introduce any known warnings to
the build. Hopefully these can be solved soon.
[0] https://lore.kernel.org/lkml/20210818060533.3569517-1-keescook@chromium.org/
[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/log/?qt=grep&q=FORTIFY_SOURCE
[2] https://lore.kernel.org/lkml/202108220107.3E26FE6C9C@keescook/
[3] https://lore.kernel.org/lkml/3ab153ec-2798-da4c-f7b1-81b0ac8b0c5b@roeck-us.net/
[4] https://bugs.llvm.org/show_bug.cgi?id=51682
[5] https://lore.kernel.org/lkml/202109051257.29B29745C0@keescook/
[6] https://lore.kernel.org/lkml/20211020200039.170424-1-keescook@chromium.org/
-----BEGIN PGP SIGNATURE-----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=9xbT
-----END PGP SIGNATURE-----
Merge tag 'overflow-v5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull overflow updates from Kees Cook:
"The end goal of the current buffer overflow detection work[0] is to
gain full compile-time and run-time coverage of all detectable buffer
overflows seen via array indexing or memcpy(), memmove(), and
memset(). The str*() family of functions already have full coverage.
While much of the work for these changes have been on-going for many
releases (i.e. 0-element and 1-element array replacements, as well as
avoiding false positives and fixing discovered overflows[1]), this
series contains the foundational elements of several related buffer
overflow detection improvements by providing new common helpers and
FORTIFY_SOURCE changes needed to gain the introspection required for
compiler visibility into array sizes. Also included are a handful of
already Acked instances using the helpers (or related clean-ups), with
many more waiting at the ready to be taken via subsystem-specific
trees[2].
The new helpers are:
- struct_group() for gaining struct member range introspection
- memset_after() and memset_startat() for clearing to the end of
structures
- DECLARE_FLEX_ARRAY() for using flex arrays in unions or alone in
structs
Also included is the beginning of the refactoring of FORTIFY_SOURCE to
support memcpy() introspection, fix missing and regressed coverage
under GCC, and to prepare to fix the currently broken Clang support.
Finishing this work is part of the larger series[0], but depends on
all the false positives and buffer overflow bug fixes to have landed
already and those that depend on this series to land.
As part of the FORTIFY_SOURCE refactoring, a set of both a
compile-time and run-time tests are added for FORTIFY_SOURCE and the
mem*()-family functions respectively. The compile time tests have
found a legitimate (though corner-case) bug[6] already.
Please note that the appearance of "panic" and "BUG" in the
FORTIFY_SOURCE refactoring are the result of relocating existing code,
and no new use of those code-paths are expected nor desired.
Finally, there are two tree-wide conversions for 0-element arrays and
flexible array unions to gain sane compiler introspection coverage
that result in no known object code differences.
After this series (and the changes that have now landed via netdev and
usb), we are very close to finally being able to build with
-Warray-bounds and -Wzero-length-bounds.
However, due corner cases in GCC[3] and Clang[4], I have not included
the last two patches that turn on these options, as I don't want to
introduce any known warnings to the build. Hopefully these can be
solved soon"
Link: https://lore.kernel.org/lkml/20210818060533.3569517-1-keescook@chromium.org/ [0]
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/log/?qt=grep&q=FORTIFY_SOURCE [1]
Link: https://lore.kernel.org/lkml/202108220107.3E26FE6C9C@keescook/ [2]
Link: https://lore.kernel.org/lkml/3ab153ec-2798-da4c-f7b1-81b0ac8b0c5b@roeck-us.net/ [3]
Link: https://bugs.llvm.org/show_bug.cgi?id=51682 [4]
Link: https://lore.kernel.org/lkml/202109051257.29B29745C0@keescook/ [5]
Link: https://lore.kernel.org/lkml/20211020200039.170424-1-keescook@chromium.org/ [6]
* tag 'overflow-v5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (30 commits)
fortify: strlen: Avoid shadowing previous locals
compiler-gcc.h: Define __SANITIZE_ADDRESS__ under hwaddress sanitizer
treewide: Replace 0-element memcpy() destinations with flexible arrays
treewide: Replace open-coded flex arrays in unions
stddef: Introduce DECLARE_FLEX_ARRAY() helper
btrfs: Use memset_startat() to clear end of struct
string.h: Introduce memset_startat() for wiping trailing members and padding
xfrm: Use memset_after() to clear padding
string.h: Introduce memset_after() for wiping trailing members/padding
lib: Introduce CONFIG_MEMCPY_KUNIT_TEST
fortify: Add compile-time FORTIFY_SOURCE tests
fortify: Allow strlen() and strnlen() to pass compile-time known lengths
fortify: Prepare to improve strnlen() and strlen() warnings
fortify: Fix dropped strcpy() compile-time write overflow check
fortify: Explicitly disable Clang support
fortify: Move remaining fortify helpers into fortify-string.h
lib/string: Move helper functions out of string.c
compiler_types.h: Remove __compiletime_object_size()
cm4000_cs: Use struct_group() to zero struct cm4000_dev region
can: flexcan: Use struct_group() to zero struct flexcan_regs regions
...
There are a lot of warnings due to unused protocol constants, but I believe
it's good to leave them in the sources for documentation purposes for further
development.
Switch them over from static conts to macros to avoid the warnings.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The driver requires multicolor LED support; express that in Kconfig.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The wait_for_completion_timeout function returns 0 if timed out or a
positive value if completed. Hence, "less than zero" comparison always
misses timeouts and doesn't kill the URB as it should, leading to
re-sending it while it is active.
Fixes: 42337b9d4d ("HID: add driver for U2F Zero built-in LED and RNG")
Signed-off-by: Andrej Shadura <andrew.shadura@collabora.co.uk>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The previous commit fixed handling of incomplete packets but broke error
handling: offsetof returns an unsigned value (size_t), but when compared
against the signed return value, the return value is interpreted as if
it were unsigned, so negative return values are never less than the
offset.
To make the code easier to read, calculate the minimal packet length
once and separately, and assign it to a signed int variable to eliminate
unsigned math and the need for type casts. It then becomes immediately
obvious how the actual data length is calculated and why the return
value cannot be less than the minimal length.
Fixes: 22d65765f2 ("HID: u2fzero: ignore incomplete packets without data")
Fixes: 42337b9d4d ("HID: add driver for U2F Zero built-in LED and RNG")
Signed-off-by: Andrej Shadura <andrew.shadura@collabora.co.uk>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
NitroKey produced a clone of U2F Zero with a different firmware,
which moved extra commands into the vendor range.
Disambiguate hardware revisions and select the correct configuration in
u2fzero_probe.
Link: https://github.com/Nitrokey/nitrokey-fido-u2f-firmware/commit/a93c16b41f
Signed-off-by: Andrej Shadura <andrew.shadura@collabora.co.uk>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The helper function devm_add_action_or_reset() will internally
call devm_add_action(), and if devm_add_action() fails then it will
execute the action mentioned and return the error code. So
use devm_add_action_or_reset() instead of devm_add_action()
to simplify the error handling, reduce the code.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The size of the critical section in this function appears to be larger
than necessary. The `wacom_udev_list_lock` exists to ensure that one
interface cannot begin checking if a shared object exists while a second
interface is doing the same (otherwise both could determine that no
object exists yet and create their own independent objects rather than
sharing just one). It should be safe for the critical section to end
once a fresly-allocated shared object would be found by other threads
(i.e., once it has been added to `wacom_udev_list`, which is looped
over by `wacom_get_hdev_data`).
This commit is a necessary pre-requisite for a later change to swap the
use of `devm_add_action` with `devm_add_action_or_reset`, which would
otherwise deadlock in its error case.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch adds a check for if the rumble queue ringbuffer is empty
prior to queuing the rumble workqueue. If the current rumble setting is
using a non-zero amplitude though, it will queue the worker anyway. This
is because the controller will automatically disable the rumble effect
if it isn't "refreshed".
This change improves bluetooth communication reliability with the
controller, since it reduces the amount of traffic.
Note that we still send a few periodic zero packets to avoid scenarios
where the controller fails to process the zero amplitude packet. Without
sending a few to be sure, the rumble could get stuck on until the
controller times out.
Signed-off-by: Daniel J. Ogorchock <djogorchock@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
It has been found that sending subcommands and rumble data packets at
too great a rate can result in controller disconnects. This patch limits
the rate of subcommands/rumble to once every 25 milliseconds.
Similar to sending subcommands, it is more reliable to send the rumble
data packets immediately after we've received an input report from the
controller. This results in far fewer bluetooth disconnects for the
controller.
Signed-off-by: Daniel J. Ogorchock <djogorchock@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch alters the method that the rumble data is sent to the
controller. Rather than using the enable rumble subcommand for this
purpose, the driver now employs the RUMBLE_ONLY output report. This has
the advantage of not needing to receive a subcommand reply (to the major
benefit of reducing IMU latency) and also seems to make the rumble
vibrations more continuous. Perhaps most importantly it reduces
disconnects during times of heavy rumble.
Signed-off-by: Daniel J. Ogorchock <djogorchock@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch adds support for the controller's IMU. The accelerometer and
gyro data are both provided to userspace using a second input device.
The devices can be associated using their uniq value (set to the
controller's MAC address).
A large part of this patch's functionality was provided by Carl Mueller.
The IMU device is blacklisted from the joydev input handler.
Signed-off-by: Daniel J. Ogorchock <djogorchock@gmail.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
If the controller's SPI flash contains user stick calibration(s), they
should be prioritized over the factory calibrations. The user
calibrations have 2 magic bytes preceding them. If the bytes are the
correct magic values, the user calibration is used.
Signed-off-by: Daniel J. Ogorchock <djogorchock@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch adds support for the joy-con charging grip. The peripheral
essentially behaves the same as a pro controller, but with two joy-cons
attached to the grip. However the grip exposes the two joy-cons as
separate hid devices, so extra handling is required. The joy-con is
queried to check if it is a right or left joy-con (since the product ID
is identical between left/right when using the grip).
Since controller model detection is now more complicated, the various
checks for hid product values have been replaced with helper macros to
reduce code duplication.
Signed-off-by: Daniel J. Ogorchock <djogorchock@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch sets the input device's uniq identifier to the controller's
MAC address. This is useful for future association between an IMU input
device with the normal input device as well as associating the
controller with any serial joy-con driver.
Signed-off-by: Daniel J. Ogorchock <djogorchock@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch fixes meaningless error output from trying to send
subcommands immediately after controller removal. It now disables
subcommands as soon as possible on removal.
Signed-off-by: Daniel J. Ogorchock <djogorchock@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch sets the most significant bit of the hid hw version to allow
userspace to distinguish between this driver's input mappings vs. the
default hid mappings. This prevents breaking userspace applications that
use SDL2 for gamepad input, allowing them to distinguish the mappings
based on the version.
Signed-off-by: Daniel J. Ogorchock <djogorchock@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Waiting to send subcommands until right after receiving an input report
drastically improves subcommand reliability. If the driver has finished
initial controller configuration, it now waits until receiving an input
report for all subcommands.
Signed-off-by: Daniel J. Ogorchock <djogorchock@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The controller occasionally doesn't respond to subcommands. It appears
that it's dropping them. To improve reliability, this patch attempts one
retry in the case of a synchronous send timeout. In testing, this has
resolved all timeout failures (most common for LED setting and rumble
setting subcommands).
The 1 second timeout is excessively long for rumble and LED subcommands,
so the timeout has been made a param for joycon_hid_send_sync. Most
subcommands continue to use the 1s timeout, since they can result in
long response times. Rumble and LED setting subcommands have been
reduced to 250ms, since response times for them are much quicker (and
this significantly reduces the observable impact in the case of a retry
being required).
Signed-off-by: Daniel J. Ogorchock <djogorchock@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch adds support for controller rumble.
The ff_effect weak magnitude is associated with the pro controller's
right motor (or with a right joy-con). The strong magnitude is
associated with the pro's left motor (or a left joy-con).
The rumble data is sent periodically (currently configured for every 50
milliseconds). If the controller receives no rumble data for too long a
time period, it will stop vibrating. The data is also sent every time
joycon_set_rumble is called to avoid latency of up to 50ms.
Because the rumble subcommands are sent in a deferred workqueue (they
can't be sent in the play_effect function due to the hid send sleeping),
the effects are queued. This ensures that no rumble effect is missed due
to them arriving in too quick of succession.
Signed-off-by: Daniel J. Ogorchock <djogorchock@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch adds the ability to set the intensity level of the home
button's LED.
Signed-off-by: Daniel J. Ogorchock <djogorchock@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch adds power_supply functionality to the switch controller
driver for its battery.
Signed-off-by: Daniel J. Ogorchock <djogorchock@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch adds led_classdev functionality to the switch controller
driver. It adds support for the 4 player LEDs. The Home Button LED still
needs to be supported on the pro controllers and right joy-con.
Signed-off-by: Daniel J. Ogorchock <djogorchock@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The hid-nintendo driver supports the Nintendo Switch Pro Controllers and
the Joy-Cons. The Pro Controllers can be used over USB or Bluetooth.
The Joy-Cons each create their own, independent input devices, so it is
up to userspace to combine them if desired.
Signed-off-by: Daniel J. Ogorchock <djogorchock@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
brightness_set_blocking() callback expects function returning int. This fixes
the follwoing build failure:
drivers/hid/hid-playstation.c: In function ‘dualsense_player_led_set_brightness’:
drivers/hid/hid-playstation.c:885:1: error: no return statement in function returning non-void [-Werror=return-type]
}
^
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The DualSense player LEDs were so far not adjustable from user-space.
This patch exposes each LED individually through the LED class. Each
LED uses the new 'player' function resulting in a name like:
'inputX:white:player-1' for the first LED.
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The DualSense lightbar has so far been supported, but it was not yet
adjustable from user space. This patch exposes it through a multi-color
LED.
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Until now we have only ever seen HID devices with target ID 2. The new
Surface Laptop Studio however uses HID devices with target ID 1. Allow
matching this driver to those as well.
Cc: stable@vger.kernel.org # 5.14+
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20211021130904.862610-4-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Until now, we have only ever seen the REG-category registry being used
on devices addressed with target ID 2. In fact, we have only ever seen
Surface Aggregator Module (SAM) HID devices with target ID 2. For those
devices, the registry also has to be addressed with target ID 2.
Some devices, like the new Surface Laptop Studio, however, address their
HID devices on target ID 1. As a result of this, any target ID 2
commands time out. This includes event management commands addressed to
the target ID 2 REG-category registry. For these devices, the registry
has to be addressed via target ID 1 instead.
We therefore assume that the target ID of the registry to be used
depends on the target ID of the respective device. Implement this
accordingly.
Note that we currently allow the surface HID driver to only load against
devices with target ID 2, so these timeouts are not happening (yet).
This is just a preparation step before we allow the driver to load
against all target IDs.
Cc: stable@vger.kernel.org # 5.14+
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20211021130904.862610-3-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
On Windows systems, ASUS laptops uses the "turn display off" key
(usually fn+f6) to turn both display and keyboard backlit off. On Linux
systems, this key has no effect at all since most desktop enviroments
don't deal with KEY_DISPLAY_OFF. By mapping it to KEY_SCREENLOCK
instead, would enable desktop environments to handle this key as a
screen lock intent from the user, out of the box.
Signed-off-by: Vinícius Angiolucci Reis <angiolucci@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Some Apple ISO keyboards have a quirk where the backtick/tilde key is
swapped with the less-than/greater-than key. Unfortunately, there is no
perfectly reliable way to detect whether a keyboard has the quirk or
not, but the quirk appears to only be present on models that support
Bluetooth, and the affected keyboards usually report country code 13 in
the HID descriptor.
Therefore, the best we can do is to change
/sys/module/hid_apple/parameters/iso_layout to a ternary:
0 = Not ISO or ISO and not quirky
1 = ISO and quirky
-1 = Guess based on product ID and country code
Table of keyboards that José, Julian and I have tested:
Product Model Shape Labels Bus Country Quirky
=========================================================
05ac:0201 M2452 ANSI Usonian USB 0 No
05ac:020b A1048 ANSI Usonian USB 0 No
05ac:020c A1048 ISO Québécois USB 13 No
05ac:0221 A1243 ISO Norwegian USB 13 No
05ac:0221 A1243 ISO Portuguese USB 13 No
05ac:0221 A1243 ISO Swedish USB 13 No
05ac:0221 A1243 ISO Swiss USB 13 No
05ac:022c A1255 ANSI Usonian BT 33 No
05ac:022d A1255 ISO Hebrew BT 13 Yes
05ac:022d A1255 ISO Québécois BT 13 Yes
05ac:022d A1255 ISO Spanish BT 13 Yes
05ac:023a A1314 ISO Russian BT 13 Yes
05ac:023a A1314 ISO Swiss BT 13 Yes
05ac:024f A1243 ANSI Usonian USB 0 No
05ac:0250 A1243 ISO British USB 13 No
05ac:0250 A1243 ISO German USB 13 No
05ac:0250 A1243 ISO Italian USB 13 No
05ac:0250 A1243 ISO Québécois USB 13 No
05ac:0251 A1243 JIS Japanese USB 15 No
05ac:0255 A1314 ANSI Usonian BT 33 No
05ac:0255 A1314 ANSI Taiwanese BT 33 No
05ac:0255 A1314 ANSI Thai BT 33 No
05ac:0256 A1314 ISO Arabic BT 13 Yes
05ac:0256 A1314 ISO French BT 13 Yes
05ac:0256 A1314 ISO German BT 13 Yes
05ac:0256 A1314 ISO Norwegian BT 13 Yes
05ac:0256 A1314 ISO Spanish BT 13 Yes
05ac:0256 A1314 ISO Swiss BT 13 Yes
05ac:0257 A1314 JIS Japanese BT 15 No
05ac:0267 A1644 ANSI Usonian USB 33 No
004c:0267 A1644 ANSI Usonian BT 0 No
05ac:0267 A1644 ISO British USB 13 Yes
004c:0267 A1644 ISO British BT 0 Yes
05ac:0267 A1644 ISO Finnish USB 13 Yes
004c:0267 A1644 ISO Finnish BT 0 Yes
05ac:0267 A1644 ISO Québécois USB 13 Yes
004c:0267 A1644 ISO Québécois BT 0 Yes
05ac:0267 A1644 ISO Spanish USB 13 Yes
004c:0267 A1644 ISO Spanish BT 0 Yes
05ac:0267 A1644 ISO Swiss USB 13 Yes
004c:0267 A1644 ISO Swiss BT 0 Yes
05ac:0267 A1644 JIS Japanese USB 15 No
004c:0267 A1644 JIS Japanese BT 0 No
05ac:029c A2450 ANSI Usonian USB 33 No
004c:029c A2450 ANSI Usonian BT 0 No
05ac:029c A2450 ISO Spanish USB 13 Yes
004c:029c A2450 ISO Spanish BT 0 Yes
05ac:029c A2450 JIS Japanese USB 15 No
004c:029c A2450 JIS Japanese BT 0 No
Reported-by: José Expósito <jose.exposito89@gmail.com>
Tested-by: José Expósito <jose.exposito89@gmail.com>
Tested-by: Julian Weigt <juw@posteo.de>
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The ANSI, ISO, and JIS variants of this keyboard all have the same
product ID.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
When a finger is on the screen, the UPERFECT Y portable touchscreen
monitor reports a contact in the first place. However, after this
initial report, contacts are not reported at the refresh rate of the
screen as required by the Windows 8 specs.
This behaviour triggers the release_timer, removing the fingers even
though they are still present.
To avoid it, add a new class, similar to MT_CLS_WIN_8 but without the
MT_QUIRK_STICKY_FINGERS quirk for this device.
Suggested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The helper function devm_add_action_or_reset() will internally
call devm_add_action(), and if devm_add_action() fails then it will
execute the action mentioned and return the error code. So
use devm_add_action_or_reset() instead of devm_add_action()
to simplify the error handling, reduce the code.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The wrappers pci_set_drvdata or pci_get_drvdata changed to
dev_set_drvdata or dev_get_drvdata.
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Use dma_set_mask_and_coherent() to set both the streaming and
coherent masks.
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The cl_data field of a privdata must be allocated and updated before
using in amd_sfh_hid_client_init() function.
Hence handling NULL pointer cl_data accordingly.
Fixes: d46ef750ed ("HID: amd_sfh: Fix potential NULL pointer dereference")
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memset(), avoid intentionally writing across
neighboring fields.
Add struct_group() to mark region of struct kone_mouse_event that should
be initialized to zero.
Cc: Stefan Achatz <erazor_de@users.sourceforge.net>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: linux-input@vger.kernel.org
Acked-by: Jiri Kosina <jikos@kernel.org>
Link: https://lore.kernel.org/lkml/nycvar.YFH.7.76.2108201810560.15313@cbobk.fhfr.pm
Signed-off-by: Kees Cook <keescook@chromium.org>
In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memcpy(), memmove(), and memset(), avoid
intentionally writing across neighboring fields.
Use struct_group() in struct cp2112_string_report around members report,
length, type, and string, so they can be referenced together. This will
allow memcpy() and sizeof() to more easily reason about sizes, improve
readability, and avoid future warnings about writing beyond the end of
report.
"pahole" shows no size nor member offset changes to struct
cp2112_string_report. "objdump -d" shows no meaningful object
code changes (i.e. only source line number induced differences.)
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: linux-input@vger.kernel.org
Acked-by: Jiri Kosina <jikos@kernel.org>
Link: https://lore.kernel.org/lkml/nycvar.YFH.7.76.2108201810560.15313@cbobk.fhfr.pm
Signed-off-by: Kees Cook <keescook@chromium.org>
This patch enables side-buttons of Xiaomi Bluetooth mouse (specifically Xiaomi
Mi Dual Mode Wireless Mouse Silent Edition).
The mouse sends invalid button count in its HID Report Descriptor and this
patch just replaces its descriptor with corrected one. With this driver side
buttons work as expected acting like Back/Forward buttons.
Signed-off-by: Ilya Skriblovsky <ilyaskriblovsky@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The snprintf() limits are complicated and slightly wrong when it does:
max(0, HID_DEBUG_BUFSIZE - len - 1)
The "- 1" should not be there. It means we can't use the last
byte of the buffer. If we change the first snprintf() to scnprintf()
then we can remove the max().
At the start of the function the strlen(buf) is going always going to
be < HID_DEBUG_BUFSIZE so that is safe. If it were > HID_DEBUG_BUFSIZE
then that would result in a WARN().
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This code has been dead since 2013, when the appleir driver was added by
commit 9a4a5574ce ("HID: appleir: add support for Apple ir devices"),
removing Apple IR receivers from this driver.
No other Apple devices use these quirks, so drop them.
Signed-off-by: Alexander F. Lent <lx@xanderlent.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Since the actual_length calculation is performed unsigned, packets
shorter than 7 bytes (e.g. packets without data or otherwise truncated)
or non-received packets ("zero" bytes) can cause buffer overflow.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=214437
Fixes: 42337b9d4d958("HID: add driver for U2F Zero built-in LED and RNG")
Signed-off-by: Andrej Shadura <andrew.shadura@collabora.co.uk>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
devm_add_action_or_reset() can suddenly invoke amd_mp2_pci_remove() at
registration that will cause NULL pointer dereference since
corresponding data is not initialized yet. The patch moves
initialization of data before devm_add_action_or_reset().
Found by Linux Driver Verification project (linuxtesting.org).
[jkosina@suse.cz: rebase]
Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Acked-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add the new PIDs to wacom_wac.c to support the new models in the Intuos series.
[jkosina@suse.cz: fix changelog]
Signed-off-by: Joshua Dickens <joshua.dickens@wacom.com>
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Syzbot reported slab-out-of-bounds Write bug in hid-betopff driver.
The problem is the driver assumes the device must have an input report but
some malicious devices violate this assumption.
So this patch checks hid_device's input is non empty before it's been used.
Reported-by: syzbot+07efed3bc5a1407bd742@syzkaller.appspotmail.com
Signed-off-by: F.A. SULAIMAN <asha.16@itfac.mrt.ac.lk>
Reviewed-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Pull HID updates from Jiri Kosina:
- Fix in i2c-hid driver for Elan touchpad quirk regression (Jim
Broadus)
- Quirk preventing ASUS Claymore from accidentally suspending whole
system (Luke D. Jones)
- Updates to the existing FW reporting mechanism, MP2 FW status checks,
adding proper power management support for amd-sfh (Basavaraj
Natikar)
- Regression fix for an issue in HID core that got uncovered by recent
USB core cleanup leading to issues when transfer_buffer_length is not
in line with wLength (Alan Stern)
- Memory leak fix in USB HID core (Anirudh Rayabharam)
- Improvement of stylus battery reporting (Dmitry Torokhov)
- Power management improvement for Goodix driver (Douglas Anderson)
- High-resolution scroll support for Magicmouse devices (José Expósito)
- Support for GHLive PS4 dongles (Daniel Nguyen)
- Support proper EV_MSC emissions to hid-apple (Vincent Lefevre)
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (31 commits)
HID: usbhid: Simplify code in hid_submit_ctrl()
HID: usbhid: Fix warning caused by 0-length input reports
HID: usbhid: Fix flood of "control queue full" messages
HID: sony: Fix more ShanWan clone gamepads to not rumble when plugged in.
HID: sony: support for the ghlive ps4 dongles
HID: thrustmaster: clean up Makefile and adapt quirks
HID: i2c-hid: Fix Elan touchpad regression
HID: asus: Prevent Claymore sending suspend event
HID: amd_sfh: Add dyndbg prints for debugging
HID: amd_sfh: Add support for PM suspend and resume
HID: amd_sfh: Move hid probe after sensor is enabled
HID: amd_sfh: Add command response to check command status
HID: amd_sfh: Fix period data field to enable sensor
HID: logitech-hidpp: battery: provide CAPACITY property for newer devices
HID: thrustmaster: Fix memory leak in thrustmaster_interrupts()
HID: thrustmaster: Fix memory leak in remove
HID: thrustmaster: Fix memory leaks in probe
HID: elo: update the reference count of the usb device structure
HID: logitech-hidpp: Use 'atomic_inc_return' instead of hand-writing it
HID: apple: Add missing scan code event for keys handled by hid-apple
...
- Regression fix for an issue in HID core that got uncovered by recent USB core
cleanup leading to issues when transfer_buffer_length is not in line with wLength
- Memory leak fix in USB HID core
- Improvement of stylus battery reporting
This patch makes a small simplification to the code in
hid_submit_ctrl(). The test for maxpacket being > 0 is unnecessary,
because endpoint 0 always has a maxpacket value which is >= 8.
Furthermore, endpoint 0's maxpacket value is always a power of 2, so
instead of open-coding the round-to-next-multiple computation we can
call the optimized round_up() routine.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Syzbot found a warning caused by hid_submit_ctrl() submitting a
control request to transfer a 0-length input report:
usb 1-1: BOGUS control dir, pipe 80000280 doesn't match bRequestType a1
(The warning message is a little difficult to understand. It means
that the control request claims to be for an IN transfer but this
contradicts the USB spec, which requires 0-length control transfers
always to be in the OUT direction.)
Now, a zero-length report isn't good for anything and there's no
reason for a device to have one, but the fuzzer likes to pick out
these weird edge cases. In the future, perhaps we will decide to
reject 0-length reports at probe time. For now, the simplest approach
for avoiding these warnings is to pretend that the report actually has
length 1.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-and-tested-by: syzbot+9b57a46bf1801ce2a2ca@syzkaller.appspotmail.com
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
[patch description by Alan Stern]
Commit 7652dd2c5c ("USB: core: Check buffer length matches wLength
for control transfers") causes control URB submissions to fail if the
transfer_buffer_length value disagrees with the setup packet's wLength
valuel. Unfortunately, it turns out that the usbhid can trigger this
failure mode when it submits a control request for an input report: It
pads the transfer buffer size to a multiple of the maxpacket value but
does not increase wLength correspondingly.
These failures have caused problems for people using an APS UPC, in
the form of a flood of log messages resembling:
hid-generic 0003:051D:0002.0002: control queue full
This patch fixes the problem by setting the wLength value equal to the
padded transfer_buffer_length value in hid_submit_ctrl(). As a nice
bonus, the code which stores the transfer_buffer_length value is now
shared between the two branches of an "if" statement, so it can be
de-duplicated.
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Fixes: 7652dd2c5c ("USB: core: Check buffer length matches wLength for control transfers")
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The device string on these can differ, apparently, including typos. I've
bought 2 of these in 2012 and googling shows many folks out there with
that broken spelling in their dmesg.
Signed-off-by: Ulrich Spörlein <uqs@FreeBSD.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This commit adds support for the Guitar Hero Live PS4 dongles.
These dongles require a "magic" USB control message to be sent
every 8 seconds otherwise the dongle will not report events where
the strumbar is hit while a fret is being held.
Note that the GHL_GUITAR_POKE_INTERVAL is reduced to 8 seconds in order
to support PS3, Wii U, and PS4 GHL dongles.
Also note that the constant for vendor id 0x1430 has been renamed from
Activision to RedOctane as self-declared by the device.
Co-developed-by: Pascal Giard <pascal.giard@etsmtl.ca>
Signed-off-by: Pascal Giard <pascal.giard@etsmtl.ca>
Signed-off-by: Daniel Nguyen <daniel.nguyen.1@ens.etsmtl.ca>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Commit c49c336378 ("HID: support for initialization of some Thrustmaster
wheels") messed up the Makefile and quirks during the refactoring of this
commit.
Luckily, ./scripts/checkkconfigsymbols.py warns on non-existing configs:
HID_TMINIT
Referencing files: drivers/hid/Makefile, drivers/hid/hid-quirks.c
Following the discussion (see Link), CONFIG_HID_THRUSTMASTER is the
intended config for CONFIG_HID_TMINIT and the file hid-tminit.c was
actually added as hid-thrustmaster.c.
So, clean up Makefile and adapt quirks to that refactoring.
Fixes: c49c336378 ("HID: support for initialization of some Thrustmaster wheels")
Link: https://lore.kernel.org/linux-input/CAKXUXMx6dByO03f3dX0X5zjvQp0j2AhJBg0vQFDmhZUhtKxRxw@mail.gmail.com/
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
A quirk was recently added for Elan devices that has same device match
as an entry earlier in the list. The i2c_hid_lookup_quirk function will
always return the last match in the list, so the new entry shadows the
old entry. The quirk in the previous entry, I2C_HID_QUIRK_BOGUS_IRQ,
silenced a flood of messages which have reappeared in the 5.13 kernel.
This change moves the two quirk flags into the same entry.
Fixes: ca66a6770b (HID: i2c-hid: Skip ELAN power-on command after reset)
Signed-off-by: Jim Broadus <jbroadus@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Prevent the ASUS Claymore keyboard from sending a suspend event
when the device sleeps itself. The suspend event causes a system
suspend if uncaught.
Signed off by: Luke D Jones <luke@ljones.dev>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add dynamic debug for debugging sensors states during
initialization, stop, suspend and resume.
Reviewed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add support for power management routines.
Reviewed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Earlier platforms don’t have sensor status checking mechanism.
Sensors are always enabled without checking sensor status.
Hence invoke hid probe only after the sensor is enabled by
checking sensor status.
Reviewed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Sometimes sensor enable/disable may take time, without checking the
actual status bits from MP2 FW can lead the amd-sfh to misbehave.
Hence add a status check of enable/disable command
by waiting on the command response before sending the next
command to FW.
Reviewed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Existing amd-sfh driver is programming the MP2 firmware period field in
units of jiffies, but the MP2 firmware expects in milliseconds unit.
Changing it to milliseconds.
Fixes: 4b2c53d93a ("SFH:Transport Driver to add support of AMD Sensor Fusion Hub (SFH)")
Reviewed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
For devices that only support the BATTERY_VOLTAGE (0x1001) feature, UPower
requires the additional information provided by this patch, to set them up.
Signed-off-by: Hamza Mahfooz <someguy@effective-light.com>
Reviewed-by: Filipe Laíns <lains@riseup.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
thrustmaster_interrupts() does not free memory for send_buf when
usb_interrupt_msg() fails. This is fixed by the given patch.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
thrustmaster_remove() does not release memory for
tm_wheel->change_request. This is fixed by the patch.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
When thrustmaster_probe() handles errors of usb_submit_urb() it does not
free allocated resources and fails. The patch fixes that.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Use usb_get_dev() to increment the reference count of the usb device
structure in order to avoid releasing the structure while it is still in
use. And use usb_put_dev() to decrement the reference count and thus,
when it will be equal to 0 the structure will be released.
Signed-off-by: Salah Triki <salah.triki@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This function logs a warning if the workqueue gets too big.
In order to save a few cycles, use 'atomic_inc_return()' instead of an
'atomic_inc()/atomic_read()' sequence.
This axes a line of code and saves a 'atomic_read()' call.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This commit fixes a functional regression introduced by the commit 82f09a637d
("HID: ft260: improve error handling of ft260_hid_feature_report_get()")
when upon USB disconnect, the FTDI FT260 i2c device is still available within
the /dev folder.
In my company's product, where the host USB to FT260 USB connection is
hard-wired in the PCB, the issue is not reproducible. To reproduce it, I used
the VirtualBox Ubuntu 20.04 VM and the UMFT260EV1A development module for the
FTDI FT260 chip:
Plug the UMFT260EV1A module into a USB port and attach it to VM.
The VM shows 2 i2c devices under the /dev:
michael@michael-VirtualBox:~$ ls /dev/i2c-*
/dev/i2c-0 /dev/i2c-1
The i2c-0 is not related to the FTDI FT260:
michael@michael-VirtualBox:~$ cat /sys/bus/i2c/devices/i2c-0/name
SMBus PIIX4 adapter at 4100
The i2c-1 is created by hid-ft260.ko:
michael@michael-VirtualBox:~$ cat /sys/bus/i2c/devices/i2c-1/name
FT260 usb-i2c bridge on hidraw1
Now, detach the FTDI FT260 USB device from VM. We expect the /dev/i2c-1
to disappear, but it's still here:
michael@michael-VirtualBox:~$ ls /dev/i2c-*
/dev/i2c-0 /dev/i2c-1
And the kernel log shows:
[ +0.001202] usb 2-2: USB disconnect, device number 3
[ +0.000109] ft260 0003:0403:6030.0002: failed to retrieve system status
[ +0.000316] ft260 0003:0403:6030.0003: failed to retrieve system status
It happens because the commit 82f09a637d changed the ft260_get_system_config()
return logic. This caused the ft260_is_interface_enabled() to exit with error
upon the FT260 device USB disconnect, which in turn, aborted the ft260_remove()
before deleting the FT260 i2c device and cleaning its sysfs stuff.
This commit restores the FT260 USB removal functionality and improves the
ft260_is_interface_enabled() code to handle correctly all chip modes defined
by the device interface configuration pins DCNF0 and DCNF1.
Signed-off-by: Michael Zaidman <michael.zaidman@gmail.com>
Acked-by: Aaron Jones (FTDI-UK) <aaron.jones@ftdichip.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
When an EV_KEY event is generated by hid-apple due to special key
mapping, the usual associated scan code event (EV_MSC) is missing.
This issue can be seen with the evtest utility.
Add the scan code event for these special keys.
BugLink: https://bugs.debian.org/757356
Co-developed-by: Daniel Lin <ephemient@gmail.com>
Signed-off-by: Daniel Lin <ephemient@gmail.com>
Signed-off-by: Vincent Lefevre <vincent@vinc17.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
These chips report mute button events in bit 4 of their report without it
being part of the report descriptor.
Use a custom descriptor that maps this bit.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
In commit 18eeef46d3 ("HID: i2c-hid: goodix: Tie the reset line to
true state of the regulator") I added a call to
regulator_register_notifier() but no call to unregister. That's a
bug. Let's use the devm variant to handle the unregistering.
Fixes: 18eeef46d3 ("HID: i2c-hid: goodix: Tie the reset line to true state of the regulator")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
We perform this same set of tests to see if touch input is muted in
several places. We might as well replace these independent copies with
an inline function.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Empty sync events clutter up logs and are a waste of CPU cycles. We can
avoid sending mt_sync events if touch is disabled or a specific slot is
unused. We can avoid sending full sync events if no events were generated.
Signed-off-by: Ping Cheng <ping.cheng@wacom.com>
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Avoid doing unnecessary work when touch is disabled by detecting this
condition and returning early. Note that the probe process sends GET
FEATURE requests to discover e.g. HID_DG_CONTACTMAX, so we can't start
ignoring touch reports until probe finishes.
Signed-off-by: Ping Cheng <ping.cheng@wacom.com>
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Wacom touch devices have two types of touch switches: softkey touch
toggle and hardware touch switch. For softkey toggle, we assume
touch is on by default in the driver. However the hardware touch
switch is controlled by end users. We don't know if it's on or off
before getting the status event.
This patch sets touch off for devices with a hardware switch until we
get the status. This is a bit safer for users who leave the switch "off"
and don't want any accidental touches. The tradeoff is a slight delay
between device connection and touch becoming enabled for users who
leave the switch "on".
Signed-off-by: Ping Cheng <ping.cheng@wacom.com>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
Tested-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The `input_mt_get_slot_by_key` function may return a negative value
if an error occurs (e.g. running out of slots). If this occurs we
should really avoid reporting any data for the slot.
Signed-off-by: Ping Cheng <ping.cheng@wacom.com>
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Commit 670e90924b ("HID: wacom: support named keys on older devices")
added support for sending named events from the soft buttons on the
24HDT and 27QHDT. In the process, however, it inadvertantly disabled the
touchscreen of the 24HDT and 27QHDT by default. The
`wacom_set_shared_values` function would normally enable touch by default
but because it checks the state of the non-shared `has_mute_touch_switch`
flag and `wacom_setup_touch_input_capabilities` sets the state of the
/shared/ version, touch ends up being disabled by default.
This patch sets the non-shared flag, letting `wacom_set_shared_values`
take care of copying the value over to the shared version and setting
the default touch state to "on".
Fixes: 670e90924b ("HID: wacom: support named keys on older devices")
CC: stable@vger.kernel.org # 5.4+
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
There is a spelling mistake in the Kconfig text. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Keychron K1 wireless keyboard has a set of Apple-like function keys
and an Fn key that works like on an Apple bluetooth keyboard. It
identifies as an Apple Alu RevB ANSI keyboard (05ac:024f) over USB and
BT. Use hid-apple for it so the Fn key and function keys work correctly.
Signed-off-by: Haochen Tong <i@hexchain.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
There is a missing space in "relyingon".
Add it.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Fixes: 6a82582d9f ("HID: ft260: add usb hid to i2c host bridge driver")
Fix warning reported by static analysis when built with W=1 for arm64 by
clang version 13.0.0
>> drivers/hid/hid-ft260.c:794:44: warning: format specifies type 'short' but
the argument has type 'int' [-Wformat]
return scnprintf(buf, PAGE_SIZE, "%hi\n", le16_to_cpu(*field));
~~~ ^~~~~~~~~~~~~~~~~~~
%i
include/linux/byteorder/generic.h:91:21: note: expanded from
macro 'le16_to_cpu'
#define le16_to_cpu __le16_to_cpu
^
include/uapi/linux/byteorder/big_endian.h:36:26: note: expanded from
macro '__le16_to_cpu'
#define __le16_to_cpu(x) __swab16((__force __u16)(__le16)(x))
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/uapi/linux/swab.h:105:2: note: expanded from macro '__swab16'
(__builtin_constant_p((__u16)(x)) ? \
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Any sprintf style use of %h or %hi for a sub-int sized value isn't useful
since integer promotion is done on the value anyway. So, use %d instead.
https://lore.kernel.org/lkml/CAHk-=wgoxnmsj8GEVFJSvTwdnWm8wVJthefNk2n6+4TC=20e0Q@mail.gmail.com/
Signed-off-by: Michael Zaidman <michael.zaidman@gmail.com>
Suggested-by: Joe Perches <joe@perches.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The driver core ignores the return value of this callback because there
is only little it can do when a device disappears.
This is the final bit of a long lasting cleanup quest where several
buses were converted to also return void from their remove callback.
Additionally some resource leaks were fixed that were caused by drivers
returning an error code in the expectation that the driver won't go
away.
With struct bus_type::remove returning void it's prevented that newly
implemented buses return an ignored error code and so don't anticipate
wrong expectations for driver authors.
Reviewed-by: Tom Rix <trix@redhat.com> (For fpga)
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com> (For drivers/s390 and drivers/vfio)
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> (For ARM, Amba and related parts)
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Chen-Yu Tsai <wens@csie.org> (for sunxi-rsb)
Acked-by: Pali Rohár <pali@kernel.org>
Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org> (for media)
Acked-by: Hans de Goede <hdegoede@redhat.com> (For drivers/platform)
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-By: Vinod Koul <vkoul@kernel.org>
Acked-by: Juergen Gross <jgross@suse.com> (For xen)
Acked-by: Lee Jones <lee.jones@linaro.org> (For mfd)
Acked-by: Johannes Thumshirn <jth@kernel.org> (For mcb)
Acked-by: Johan Hovold <johan@kernel.org>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> (For slimbus)
Acked-by: Kirti Wankhede <kwankhede@nvidia.com> (For vfio)
Acked-by: Maximilian Luz <luzmaximilian@gmail.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> (For ulpi and typec)
Acked-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com> (For ipack)
Acked-by: Geoff Levand <geoff@infradead.org> (For ps3)
Acked-by: Yehezkel Bernat <YehezkelShB@gmail.com> (For thunderbolt)
Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> (For intel_th)
Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> (For pcmcia)
Acked-by: Rafael J. Wysocki <rafael@kernel.org> (For ACPI)
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> (rpmsg and apr)
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> (For intel-ish-hid)
Acked-by: Dan Williams <dan.j.williams@intel.com> (For CXL, DAX, and NVDIMM)
Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com> (For isa)
Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (For firewire)
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> (For hid)
Acked-by: Thorsten Scherer <t.scherer@eckelmann.de> (For siox)
Acked-by: Sven Van Asbroeck <TheSven73@gmail.com> (For anybuss)
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> (For MMC)
Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Finn Thain <fthain@linux-m68k.org>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20210713193522.1770306-6-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The regulator for the touchscreen could be:
* A dedicated regulator just for the touchscreen.
* A regulator shared with something else in the system.
* An always-on regulator.
How we want the "reset" line to behave depends a bit on which of those
three cases we're in. Currently the code is written with the
assumption that it has a dedicated regulator, but that's not really
guaranteed to be the case.
The problem we run into is that if we leave the touchscreen powered on
(because someone else is requesting the regulator or it's an always-on
regulator) and we assert reset then we apparently burn an extra 67 mW
of power. That's not great.
Let's instead tie the control of the reset line to the true state of
the regulator as reported by regulator notifiers. If we have an
always-on regulator our notifier will never be called. If we have a
shared regulator then our notifier will be called when the touchscreen
is truly turned on or truly turned off.
Using notifiers like this nicely handles all the cases without
resorting to hacks like pretending that there is no "reset" GPIO if we
have an always-on regulator.
NOTE: if the regulator is on a shared line it's still possible that
things could be a little off. Specifically, this case is not handled
even after this patch:
1. Suspend goodix (send "sleep", goodix stops requesting regulator on)
2. Other regulator user turns off (regulator fully turns off).
3. Goodix driver gets notified and asserts reset.
4. Other regulator user turns on.
5. Goodix driver gets notified and deasserts reset.
6. Nobody resumes goodix.
With that set of steps we'll have reset deasserted but we will have
lost the results of the I2C_HID_PWR_SLEEP from the suspend path. That
means we might be in higher power than we could be even if the goodix
driver thinks things are suspended. Presumably, however, we're still
in better shape than if we were asserting "reset" the whole time. If
somehow the above situation is actually affecting someone and we want
to do better we can deal with it when we have a real use case.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
amd_stop_sensor_v2 accidentally used a different MMIO register than
amd_start_sensor_v2 for the DMA address.
Fixes: f264481ad6 ("HID: amd_sfh: Extend driver capabilities for multi-generation support")
Signed-off-by: Dylan MacKenzie <ecstaticmorse@gmail.com>
Acked-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
In order to avoid triggering involuntary high-resolution scroll events
due to tiny touch movement deltas, add a movement threshold.
The value chosen for the threshold, about 1.5 ~ 2 mm, is similar to the
threshold used on touchpads by libinput (see libinput
evdev-mt-touchpad-gestures.c) to try to keep the scroll experience
consistent.
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Magic Mouse, generations 1 and 2, doesn't have a physical scroll
wheel, instead, the REL_WHEEL and REL_HWHEEL events are emulated
when sliding a finger on the surface of the mouse.
However, the smooth movement of the finger is transformed into a step
based scroll on the screen, leading to a suboptimal user experience.
Emulate high-resolution scroll by sending REL_WHEEL_HI_RES and
REL_HWHEEL_HI_RES events so the scroll on the screen is closer to the
finger movement.
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Remove the early return on LED brightness set so that any controller
application, daemon, or desktop may set the same brightness at any stage.
This is required because many ASUS ROG keyboards will default to max
brightness on laptop resume if the LEDs were set to off before sleep.
Signed-off-by: Luke D Jones <luke@ljones.dev>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The power supply states of discharging, charging, full, etc, represent
state of charging, not the capacity level of the battery (for which
we have a separate property). Current HID usage tables to not allow
for expressing charging state of the batteries found in generic
styli, so we should simply assume that the battery is discharging
even if current capacity is at 100% when battery strength reporting
is done via HID interface. In fact, we were doing just that before
commit 581c448476.
This change helps UIs to not mis-represent fully charged batteries in
styli as being charging/topping-off.
Fixes: 581c448476 ("HID: input: map digitizer battery usage")
Reported-by: Kenneth Albanowski <kenalba@google.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
ISH IPC driver uses asynchronous workqueue to do resume now, but there is
a potential timing issue: when child devices resume before bus driver, it
will cause child devices resume failed and cannot be recovered until
reboot. The current implementation in this case do wait for IPC to resume
but fail to accommodate for a case when there is no ISH reboot and soft
resume is taking time. This issue is apparent on Tiger Lake platform with
5.11.13 kernel when doing suspend to idle then resume(s0ix) test. To
resolve this issue, we change ISHTP HID client to use asynchronous resume
callback too. In the asynchronous resume callback, it waits for the ISHTP
resume done event, and then notify ISHTP HID client link ready.
Signed-off-by: Ye Xiang <xiang.ye@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
- patch series that ensures that hid-multitouch driver disables touch and
button-press reporting on hid-mt devices during suspend when the device is
not configured as a wakeup-source, from Hans de Goede
- support for LCD menu keys + LCD brightness control on the Logitech Z-10
speakers (with LCD) which use the same protocol as the G15 keyboards
from Hans de Goede
- device unbinding locking fix from Dmitry Torokhov
- support for programmable buttons (mapping to KEY_MACRO# event codes)
from Thomas Weißschuh
- various other small fixes and code style improvements
Use kmemdup() helper instead of open-coding to
simplify the code when allocate change_request.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Disable event reporting on suspend when the hid device is not
a wakeup-source. This should help save some extra power in this case.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Without a ll-driver callback hid_hw_may_wakeup() will return:
device_may_wakeup(hdev->dev.parent), but for the hid devices
instantiated by logitech-dj for devices behind the receiver the
logitech-dj hid(pp)-device is the parent.
Add a logi_dj_ll_may_wakeup() callback which calls hid_hw_may_wakeup()
on the logitech-dj hid(pp) parent-hid-device.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Without a ll-driver callback hid_hw_may_wakeup() will return:
device_may_wakeup(hdev->dev.parent), usb_hid_driver instantiated hid
devices have their parent set to the usb-interface to which the
usb_hid_driver is bound, but the power/wakeup* sysfs attributes are
part of the usb-device.
Add a may_wakeup ll-driver callback which calls device_may_wakeup()
on the usb-device instead.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Map them to KEY_MACRO# event codes.
These buttons are defined by HID as follows:
"The user defines the function of these buttons to control software applications or GUI objects."
This matches the semantics of the KEY_MACRO# input event codes that Linux supports.
Also add support for HID "Named Array" collections.
Also add hid-debug support for KEY_MACRO#.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The capacitive status of ExpressKeys is reported with usages beginning
at 0x940, not 0x950. Bring our driver into alignment with reality.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add Human Presence Detection (HPD) sensors support
on AMD next generation HPD supported platforms.
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Reviewed-by: Nehal Shah <nehal-bakulchandra.shah@amd.com>
Reviewed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Extend ALS support for AMD next generation SoC's like Renoir, Cezanne.
AMD next generation platforms use C2P message register to read ALS
sensor data instead of DRAM address.
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Reviewed-by: Nehal Shah <nehal-bakulchandra.shah@amd.com>
Reviewed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Initial driver support only covered the first generation of SFH
platforms. In order to support the future generations introduce
ops selection to distinguish the different platforms.
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Reviewed-by: Nehal Shah <nehal-bakulchandra.shah@amd.com>
Reviewed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Getting a report (e.g. feature report) from a device requires us to send
a request indicating which report we want to retrieve and then waiting
for the corresponding response containing that report. We already
provide the response structure to the request call, but the request
isn't marked as a request that expects a response. Thus the request
returns before we receive the response and the response buffer indicates
a zero length response due to that.
This essentially means that the get-report calls are broken and will
always indicate that a report of length zero has been read.
Fix this by appropriately marking the request.
Fixes: b05ff1002a ("HID: Add support for Surface Aggregator Module HID transport")
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This commit fixes a freeze on insertion of a Guitar Hero Live PS3/WiiU
USB dongle. Indeed, with the current implementation, inserting one of
those USB dongles will lead to a hard freeze. I apologize for not
catching this earlier, it didn't occur on my old laptop.
While the issue was isolated to memory alloc/free, I could not figure
out why it causes a freeze. So this patch fixes this issue by
simplifying memory allocation and usage.
We remind that for the dongle to work properly, a control URB needs to
be sent periodically. We used to alloc/free the URB each time this URB
needed to be sent.
With this patch, the memory for the URB is allocated on the probe, reused
for as long as the dongle is plugged in, and freed once the dongle is
unplugged.
Signed-off-by: Pascal Giard <pascal.giard@etsmtl.ca>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
usb_kbd_alloc_mem is called in usb_kbd_probe, which is
not in atomic context. So constraints can be relaxed here.
Use GFP_KERNEL instead of GFP_ATOMIC.
Signed-off-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Different platforms have different DMA capability, on most of
platforms, DMA support cache snooping. But few platforms,
such as ElkhartLake (EHL), don't support cache snooping
which requires cache flush from driver.
So add a hardware level callback to let ishtp driver know if cache
flush is needed.
As most of platform support cache snooping, so driver will not
do cache flush by default, until platform implements this callback
and return true explicitly.
Acked-by: Pandruvada, Srinivas <srinivas.pandruvada@intel.com>
Signed-off-by: Even Xu <even.xu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
During ISH DMA enabling, some platforms (such as EHL) don't
support cache snooping, driver needs involve clflush_cache_range
API which isn't supported by all archs (such as ARM).
Considering ISH only exists on Intel platforms, add the dependence
in Kconfig to avoid build warnings or errors on other archs.
Acked-by: Pandruvada, Srinivas <srinivas.pandruvada@intel.com>
Signed-off-by: Even Xu <even.xu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Elantech touchscreen/digitizer in the Surface Go mistakenly reports
having a battery. This results in a low battery message every time you
try to use the pen.
This patch adds a quirk to ignore the non-existent battery and
gets rid of the false low battery messages.
Signed-off-by: Zoltan Tamas Vajda <zoltan.tamas.vajda@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
There is no need to use a quirk and then return -ENODEV from the
asus_probe() function to avoid that hid-asus binds to the hiddev
for the USB-interface for the hid-multitouch touchpad.
The hid-multitouch hiddev has a group of HID_GROUP_MULTITOUCH_WIN_8,
so the same result can be achieved by making the hid_device_id entry
for the dock in the asus_devices[] table only match on HID_GROUP_GENERIC
instead of having it match HID_GROUP_ANY.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Commit 9d7b186689 ("HID: magicmouse: add support for Apple Magic
Trackpad 2") added a sanity check for an Apple trackpad but returned
success instead of -ENODEV when the check failed. This means that the
remove callback will dereference the never-initialised driver data
pointer when the driver is later unbound (e.g. on USB disconnect).
Reported-by: syzbot+ee6f6e2e68886ca256a8@syzkaller.appspotmail.com
Fixes: 9d7b186689 ("HID: magicmouse: add support for Apple Magic Trackpad 2")
Cc: stable@vger.kernel.org # 4.20
Cc: Claudio Mettler <claudio@ponyfleisch.ch>
Cc: Marek Wyborski <marek.wyborski@emwesoft.com>
Cc: Sean O'Brien <seobrien@chromium.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
clang doesn't like printing a 32-bit integer using %hX format string:
drivers/hid/i2c-hid/i2c-hid-core.c:994:18: error: format specifies type 'unsigned short' but the argument has type '__u32' (aka 'unsigned int') [-Werror,-Wformat]
client->name, hid->vendor, hid->product);
^~~~~~~~~~~
drivers/hid/i2c-hid/i2c-hid-core.c:994:31: error: format specifies type 'unsigned short' but the argument has type '__u32' (aka 'unsigned int') [-Werror,-Wformat]
client->name, hid->vendor, hid->product);
^~~~~~~~~~~~
Use an explicit cast to truncate it to the low 16 bits instead.
Fixes: 9ee3e06610 ("HID: i2c-hid: override HID descriptors for certain devices")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Replace kzalloc with devm_kzalloc in driver initialization sequence. The
allocation can be tied to the lifetime of the amd_sfh driver. This cleans
up an exit & error paths, since the objects does not need to be
explicitly freed anymore.
Fixes: 4b2c53d93a ("SFH:Transport Driver to add support of AMD Sensor Fusion Hub (SFH)")
Reviewed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The ft260_hid_feature_report_get() checks if the return size matches the
requested size. But the function can also fail with at least -ENOMEM. Add the
< 0 checks.
In ft260_hid_feature_report_get(), do not do the memcpy to the caller's buffer
if there is an error.
Fixes: 6a82582d9f ("HID: ft260: add usb hid to i2c host bridge driver")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Michael Zaidman <michael.zaidman@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
When the Apple Magic Trackpad 2 is connected over USB it registers four
hid_device report descriptors, however, the driver only handles the one
with type HID_TYPE_USBMOUSE and ignores the other three, thus, no driver
data is attached to them.
When the device is disconnected, the remove callback is called for the
four hid_device report descriptors, crashing when the driver data is
NULL.
Check that the driver data is not NULL before using it in the remove
callback.
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Bixuan Cui <cuibixuan@huawei.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Fixes: 224ee88fe3 ("Input: add force feedback driver for PID devices")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Static analysis reports this representative problem
hid-logitech-hidpp.c:1356:23: warning: Assigned value is
garbage or undefined
hidpp->battery.level = level;
^ ~~~~~
In some cases, 'level' is never set in hidpp20_battery_map_status_voltage()
Since level is not available on all hw, initialize level to unknown.
Fixes: be281368f2 ("hid-logitech-hidpp: read battery voltage from newer devices")
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Filipe Laíns <lains@riseup.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Asus T101HA has a problem with spurious wakeups when the lid is
closed, this is caused by the screen sitting so close to the touchpad
that the touchpad ends up reporting touch events, causing these wakeups.
Add a quirk which disables event reporting on suspend when set, and
enable this quirk for the Asus T101HA touchpad fixing the spurious
wakeups, while still allowing the device to be woken by pressing a
key on the keyboard (which is part of the same USB device).
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Normally the EXPORT_SYMBOL of a function immediately follows the
declaration of the function and all the other functions in hid-core.c
follow this pattern, drop the extraneous empty line before the
EXPORT_SYMBOL_GPL(hid_check_keys_pressed); line.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
probe in usb don't need to be atomic. So GFP_KERNEL can be used here,
instead of GFP_ATOMIC.
Signed-off-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
When user modifies a custom feature value and sensor_hub_set_feature()
fails, return error.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
For ELAN touchscreen, we found our boot code of IC was not flexible enough
to receive and handle this command.
Once the FW main code of our controller is crashed for some reason,
the controller could not be enumerated successfully to be recognized
by the system host. therefore, it lost touch functionality.
Add quirk for skip send power-on command after reset.
It will impact to ELAN touchscreen and touchpad on HID over I2C projects.
Fixes: 43b7029f47 ("HID: i2c-hid: Send power-on command after reset").
Cc: stable@vger.kernel.org
Signed-off-by: Johnny Chuang <johnny.chuang.emc@gmail.com>
Reviewed-by: Harry Cutts <hcutts@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
In hid_submit_ctrl(), the way of calculating the report length doesn't
take into account that report->size can be zero. When running the
syzkaller reproducer, a report of size 0 causes hid_submit_ctrl) to
calculate transfer_buffer_length as 16384. When this urb is passed to
the usb core layer, KMSAN reports an info leak of 16384 bytes.
To fix this, first modify hid_report_len() to account for the zero
report size case by using DIV_ROUND_UP for the division. Then, call it
from hid_submit_ctrl().
Reported-by: syzbot+7c2bb71996f95a82524c@syzkaller.appspotmail.com
Signed-off-by: Anirudh Rayabharam <mail@anirudhrb.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add BUS_VIRTUAL to hid_connect logging since it's a valid hid bus type and it
should not print <UNKNOWN>
Signed-off-by: Mark Bolhuis <mark@bolhuis.dev>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
These were untouched since 2.3.99-pre3, and the explanatory comment for
HID_DG_TIPPRESSURE is TipPressure in other places
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This re-adds the suffix to Win8 stylus-on-touchscreen devices,
now that they aren't erroneously marked as MT
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This effectively changes collection_is_mt from
contact ID in report->field
to
(device is Win8 => collection is finger) && contact ID in report->field
Some devices erroneously report Pen for fingers, and Win8 stylus-on-touchscreen
devices report contact ID, but mark the accompanying touchscreen device's
collection correctly
Cc: stable@vger.kernel.org
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
USB_VENDOR_ID_CORSAIR is defined twice in the same file with the same
value.
Signed-off-by: Hamza Mahfooz <someguy@effective-light.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Lenovo optical mouse with vendor id of 0x17ef and product id of
0x600e experiences disconnecting issues every 55 seconds:
[38565.706242] usb 1-1.4: Product: Lenovo Optical Mouse
[38565.728603] input: Lenovo Optical Mouse as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:17EF:600E.029A/input/input665
[38565.755949] hid-generic 0003:17EF:600E.029A: input,hidraw1: USB HID v1.11 Mouse [Lenovo Optical Mouse] on usb-0000:01:00.0-1.4/input0
[38619.360692] usb 1-1.4: USB disconnect, device number 48
[38620.864990] usb 1-1.4: new low-speed USB device number 49 using xhci_hcd
[38620.984011] usb 1-1.4: New USB device found, idVendor=17ef,idProduct=600e, bcdDevice= 1.00
[38620.998117] usb 1-1.4: New USB device strings: Mfr=0, Product=2,SerialNumber=0
This adds HID_QUIRK_ALWAYS_POLL for this device in order to work properly.
Signed-off-by: Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The G713 and G733 both emit an unexpected keycode on some key
presses such as Fn+Pause. The device in this case is emitting
two events on key down, and 3 on key up, the third key up event
is report ID 0x02 and is unfiltered, causing incorrect event.
This patch filters out the single problematic event.
Signed-off-by: Luke D Jones <luke@ljones.dev>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
I noticed that the 2 HID drivers which I've written and maintain were
missing a MODULE_AUTHOR tag, add this so that people can easily figure
out who to email with questions.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add support to hid-lg-g15 for the Logitech Z-10 speakers. This adds
support for the LCD menu keys found on these speakers, as well as
support for controlling the LCD's brightness through a LED classdev.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Make the LED-name used by lg_g15_register_led() a parameter.
This is a preparation patch for adding support for the LCD menu
keys + LCD brightness control on the Logitech Z-10 speakers (with LCD)
which use the same protocol as the G15 keyboards.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Factor the input-device setup + KEY_KBD_LCD_MENU capability setting out
of lg_g15_probe() into a new lg_g15_init_input_dev() helper function.
This is a preparation patch for adding support for the LCD menu
keys + LCD brightness control on the Logitech Z-10 speakers (with LCD)
which use the same protocol as the G15 keyboards.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Factor out the handling of the G15 LCD menu keys out of
lg_g15_event() into a new lg_g15_handle_lcd_menu_keys() helper function.
This is a preparation patch for adding support for the LCD menu
keys on the Logitech Z-10 speakers (with LCD) which use the same
funky HID report format.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The report-size is already checked in lg_g15_raw_event() before calling
the lg_*_event() functions and these functions don't use the passed
in size at all, drop the unused parameter.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
In the function sensor_hub_set_feature(), return error when hid_set_field()
fails.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The SMbus block transaction limits the number of bytes transferred to 32,
but nothing prevents a user from specifying via ioctl a larger data size
than the ft260 can handle in a single transfer.
i2cdev_ioctl_smbus()
--> i2c_smbus_xfer
--> __i2c_smbus_xfer
--> ft260_smbus_xfer
--> ft260_smbus_write
This patch adds data size checking in the ft260_smbus_write().
Fixes: 98189a0adfa0 ("HID: ft260: add usb hid to i2c host bridge driver")
Signed-off-by: Michael Zaidman <michael.zaidman@gmail.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
We want to convert from 16 bit (unsigned) little endian values contained
in a packed struct to CPU native endian values here, not the other way
around. So replace cpu_to_le16() with get_unaligned_le16(), using the
latter instead of le16_to_cpu() to acknowledge that we are reading from
a packed struct.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: b05ff1002a ("HID: Add support for Surface Aggregator Module HID transport")
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
HUTRR101 added a new usage code for a key that is supposed to invoke and
dismiss an emoji picker widget to assist users to locate and enter emojis.
This patch adds a new key definition KEY_EMOJI_PICKER and maps 0x0c/0x0d9
usage code to this new keycode. Additionally hid-debug is adjusted to
recognize this new usage code as well.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This mouse has a horizontal wheel that requires special handling.
Without this patch, the horizontal wheel acts like a vertical wheel.
In the output of `hidrd-convert` for this mouse, there is a
`Usage (B8h)` field. It corresponds to a byte in packets sent by the
device that specifies which wheel generated an input event.
The name "A4TECH" is spelled in all capitals on the company website.
Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
By default 27 MHz Logitech keyboards send the keypresses to the receiver
in plain text. Logitech's Windows "Keyboard and Mouse settings" tool allows
configuring encryption for the keyboard wireless link.
Now there also is a Linux tool for setting this up:
https://gitlab.freedesktop.org/jwrdegoede/logitech-27mhz-keyboard-encryption-setup
Once a keyboard is paired in encrypted mode, it will no longer work with
any receiver other then the receiver it was paired with.
If a user accidentally tries to pair another keyboard with the receiver
with which a keyboard has been paired in encrypted mode, then the receiver
looses the encryption key and the originally paired keyboard will no longer
work with either that receiver, or another receiver until the keyboard's
encryption key is rewritten by another encrypted mode pairing using the
tool. Or until it is reset by following a special reset procedure.
This commit adds 3 new log messages related to 27 MHz keyboard link
encryption to the Logitech dj / hidpp drivers:
1. An info level message when keyboard encryption is being used
2. A warning message when keyboard encryption is not used
3. An error message when the encryption key has been lost and the
keyboard will not work because of this
Messages 2. and 3. contain a link to the userspace tool to setup the
encryption. The linked page also contains instructions to clear the key
(without needing the tool) to help a user recover from the keyboard not
working in case 3.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Just like the K12A the Dell K15A keyboard-dock has problems with
get_feature requests. This sometimes leads to several
"failed to fetch feature 8" messages getting logged, after which the
touchpad may or may not work.
Just like the K15A these errors are triggered by undocking and docking
the tablet.
There also seem to be other problems when undocking and then docking again
in quick succession. It seems that in this case the keyboard-controller
still retains some power from capacitors and does not go through a
power-on-reset leaving it in a confuses state, symptoms of this are:
1. The USB-ids changing to 048d:8910
2. Failure to read the HID descriptors on the second (mouse) USB intf.
3. The touchpad freezing after a while
These problems can all be cleared by undocking the keyboard and waiting
a full minute before redocking it. Unfortunately there is nothing we can
do about this in the kernel.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Fix the return value check which testing the wrong variable
in thrustmaster_probe().
Fixes: c49c336378 ("HID: support for initialization of some Thrustmaster wheels")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Saitek X65 joystick has a pair of axes that were used as mouse
pointer controls by the Windows driver. The corresponding usage page is
the Game Controls page, which is not recognized by the generic HID
driver, and therefore, both axes get mapped to ABS_MISC. The quirk makes
the second axis get mapped to ABS_MISC+1, and therefore made available
separately.
Signed-off-by: Nirenjan Krishnan <nirenjan@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Action of unbinding driver from a device is not cancellable and should not
fail, and driver core does not pay attention to the result of "remove"
method, therefore using down_interruptible() in hid_device_remove() does
not make sense.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Older ROG keyboards emit a similar stream of bytes to the new
N-Key keyboards and require filtering to prevent a lot of
unmapped key warnings showing. As all the ROG keyboards use
QUIRK_USE_KBD_BACKLIGHT this is now used to branch to filtering
in asus_raw_event.
Signed-off-by: Luke D Jones <luke@ljones.dev>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
A number of USB keyboards, using the Semitek firmware, are capable of
handling arbitrary N-key rollover, but due to a buggy report
descriptor, keys beyond the sixth cannot be detected by the generic
HID driver.
There are numerous hardware variants sold by several vendors, mostly
using generic names like "GK61" for the 61-key version. These
keyboards are sometimes known collectively as the "GK6X" series.
The keyboard has three USB interfaces. Interface 0 uses the standard
HID boot protocol, limited to eight modifier keys and six normal keys;
interface 2 uses a custom report format that permits any number of
keys. If more than six keys are pressed simultaneously, the first six
are reported via interface 0 while subsequent keys are reported via
interface 2.
(Interface 1 uses a custom protocol for reprogramming the keyboard;
this can be controlled through userspace tools and is not of concern
for the present driver.)
The report descriptor for interface 2, however, is incorrect (for
report ID 0x04, the input field is marked as "array" rather than
"variable".) The descriptor appears to be correct in other respects,
so we simply replace the incorrect byte before parsing the descriptor.
Signed-off-by: Benjamin Moody <bmoody@member.fsf.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
