Commit Graph

199 Commits

Author SHA1 Message Date
zhanghongchen
f73f88acbc pinctrl: pinctrl-loongson2: add pinctrl driver support
The Loongson-2 SoC has a few pins that can be used as GPIOs or take
multiple other functions. Add a driver for the pinmuxing.

There is currently no support for GPIO pin pull-up and pull-down.

Signed-off-by: zhanghongchen <zhanghongchen@loongson.cn>
Co-developed-by: Yinbo Zhu <zhuyinbo@loongson.cn>
Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn>
Link: https://lore.kernel.org/r/20221114024942.8111-1-zhuyinbo@loongson.cn
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-11-17 10:24:08 +01:00
Jianlong Huang
ba7fdf88e9 pinctrl: Create subdirectory for StarFive drivers
Move the StarFive JH7100 pinctrl driver to a new subdirectory
in preparation for adding more StarFive pinctrl drivers. No
functional change.

Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Signed-off-by: Hal Feng <hal.feng@linux.starfivetech.com>
Link: https://lore.kernel.org/r/20220930060819.5320-1-hal.feng@linux.starfivetech.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-10-04 10:42:11 +02:00
Patrick Rudolph
e6cbbe4294 pinctrl: Add Cypress cy8c95x0 support
Add support for cypress I2C GPIO expanders cy8c9520, cy8c9540 and
cy8c9560. The GPIO expanders feature a PWM mode, thus add it as
pinctrl driver.

The chip features multiple drive modes for each pin when configured
as output and multiple bias settings when configured as input.

Tested all three components and verified that all functionality
is fully working.

Datasheet: https://www.cypress.com/file/37971/download
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
Link: https://lore.kernel.org/r/20220816054917.7893-3-patrick.rudolph@9elements.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-08-25 00:24:32 +02:00
Jonathan Neuschäfer
a1d1e0e3d8 pinctrl: nuvoton: Add driver for WPCM450
This driver is based on the one for NPCM7xx, because the WPCM450 is a
predecessor of those SoCs. Notable differences:

- On WPCM450, the GPIO registers are not organized in multiple banks,
  but rather placed continually into the same register block. This
  affects how register offsets are computed.
- Pinmux nodes can explicitly select GPIO mode, whereas in the npcm7xx
  driver, this happens automatically when a GPIO is requested.

Some functionality implemented in the hardware was (for now) left unused
in the driver, specifically blinking and pull-up/down.

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20220129115228.2257310-6-j.neuschaefer@gmx.net
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-03-15 01:16:20 +01:00
Linus Walleij
f54d626698 intel-pinctrl for v5.18-1
* Introduce support for Alder Lake-N (required to revert misplaced ID)
 * Add support for Raptor Lake-S
 * Add support for Ice Lake-N (MacBookPro16,2)
 * Miscellaneous fixes
 
 The following is an automated git shortlog grouped by driver:
 
 alderlake:
  -  Add Intel Alder Lake-N pin controller support
  -  Add Raptor Lake-S ACPI ID
 
 baytrail:
  -  Clear direct_irq_en flag on broken configs
 
 icelake:
  -  Add Ice Lake-N PCH pin controller support
 
 intel:
  -  Fix a glitch when updating IRQ flags on a preconfigured line
  -  fix unexpected interrupt
 
 Place correctly CONFIG_PINCTRL_ST in the Makefile:
  - Place correctly CONFIG_PINCTRL_ST in the Makefile
 
 tigerlake:
  -  Revert "Add Alder Lake-M ACPI ID"
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEqaflIX74DDDzMJJtb7wzTHR8rCgFAmIcwgAACgkQb7wzTHR8
 rCjvfBAAo2F2GPZbTZMPkx2jhS9Nz+qij8nRFZ/3y3tvyIxuyMpZjrJwIjynZJPk
 GN3qTJmPM/srFASVAervu/HjRQW0Ogwj/LndfSKR3h7w4VRPyXZHamL11k56SZj8
 HLihs/AUv16sVU5k4fErjrLVXuVUfxnNmNam4Mwg40AvbDTunoOM2nLtbbDwMAt8
 tTMPcmizKv3GvUL3Vfe2FhJTGvZwerEUP3U8kLwwfVAnwYYB8sZaR4PqwX91kbVQ
 5auZiCNSO05RonyJV+2ORugwNI7oiJndYxtnWueapLhUdiRsFaO6lEgEcwSVVnON
 Ge+Rq6eVoCDR/9n9ZH9SEKflpHe9Q/3Y1jqkSsSBlDfcmbWRHKDZCI4IWlnarGe9
 oKKveIXMELaqFYOfUtl5k2aV9ZjYcHM8LM8vM2/unKYizq/JUoUHgDnkuIghPYVz
 RlnTl3xqHFy7tHSGrA8vi0LCqEf8kPF/9/UIuMFBwy0chkmAdiST4K7nbROSdynP
 u9NMLonpWRMc6Sqkji2nGZu0zBnsm7Z7VHfXoulGR7ldyM5y/87mjG2n4khPUUpJ
 ZfXevCBex4CMRZ4sRCcS1R0Wf4wSDCkUrBhQ+nVCDPaLlE8fwf9ZzIrS74zRUmFf
 O7smdmrUm9C5Kb+bimZ0BTjtWf3TyWPC55/T6elG09Qjvd1pqF8=
 =NiBS
 -----END PGP SIGNATURE-----

Merge tag 'intel-pinctrl-v5.18-1' of gitolite.kernel.org:pub/scm/linux/kernel/git/pinctrl/intel into devel

intel-pinctrl for v5.18-1

* Introduce support for Alder Lake-N (required to revert misplaced ID)
* Add support for Raptor Lake-S
* Add support for Ice Lake-N (MacBookPro16,2)
* Miscellaneous fixes

The following is an automated git shortlog grouped by driver:

alderlake:
 -  Add Intel Alder Lake-N pin controller support
 -  Add Raptor Lake-S ACPI ID

baytrail:
 -  Clear direct_irq_en flag on broken configs

icelake:
 -  Add Ice Lake-N PCH pin controller support

intel:
 -  Fix a glitch when updating IRQ flags on a preconfigured line
 -  fix unexpected interrupt

Place correctly CONFIG_PINCTRL_ST in the Makefile:
 - Place correctly CONFIG_PINCTRL_ST in the Makefile

tigerlake:
 -  Revert "Add Alder Lake-M ACPI ID"
2022-02-28 23:55:50 +01:00
Wells Lu
aa74c44be1 pinctrl: Add driver for Sunplus SP7021
Add driver for Sunplus SP7021 SoC.

Signed-off-by: Wells Lu <wellslutw@gmail.com>
Link: https://lore.kernel.org/r/1642344734-27229-3-git-send-email-wellslutw@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-01-30 02:55:41 +01:00
Andy Shevchenko
77311237ea pinctrl: Place correctly CONFIG_PINCTRL_ST in the Makefile
Keep Makefile entries ordered in the same way as Kconfig ones.

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2022-01-24 16:30:13 +02:00
Linus Torvalds
e3084ed48f Pin control bulk changes for the v5.17 kernel cycle
Core changes:
 
 - New standard enumerator and corresponding device tree bindings
   for output impedance pin configuration. (Implemented and used
   in the Renesas rzg2l driver.)
 
 - Cleanup of Kconfig and Makefile to be somewhat orderly and
   alphabetic.
 
 New drivers:
 
 - Samsung Exynos 7885 pin controller.
 
 - Ocelot LAN966x pin controller.
 
 - Qualcomm SDX65 pin controller.
 
 - Qualcomm SM8450 pin controller.
 
 - Qualcomm PM8019, PM8226 and PM2250 pin controllers.
 
 - NXP/Freescale i.MXRT1050 pin controller.
 
 - Intel Thunder Bay pin controller.
 
 Enhancements:
 
 - Introduction of the string library helper function
   "kasprintf_strarray()" and subsequent use in Rockchip, ST and
   Armada pin control drivers, as well as the GPIO mockup driver.
 
 - The Ocelot pin controller has been extensively rewritten to
   use regmap and other modern kernel infrastructure.
 
 - The Microchip SGPIO driver has been converted to use regmap.
 
 - The SPEAr driver had been converted to use regmap.
 
 - Substantial cleanups and janitorial on the Apple pin control
   driver that was merged for v5.16.
 
 - Janitorial to remove of_node assignments in the GPIO portions
   that anyway get this handled in the GPIO core.
 
 - Minor cleanups and improvements in several pin controllers.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEElDRnuGcz/wPCXQWMQRCzN7AZXXMFAmHetMgACgkQQRCzN7AZ
 XXOXUA/+I8nEdBy8oBa+vYsJp/FwQi9oh2r488Bin7kCEwYJjPKDDjZuIQQQz34H
 DcSpzBBB/sSFiO27F27rk70vHGfZ4pVi57XfRI2IB1qSe4uCNCNEURVDSM9aY7Nl
 hR973GS5VDvmyo/7zUT7dWmG2b9lxRqwU2wCvVJ7y69gQEwT74iR8b51ycziBNWt
 AEQ+BUN9oVEIM6aHs9+jGgD843XIFZMWoKuwoD51036/wFDLO3lQNyuMytZaQtSB
 q1epb51jl4tPhybWrWc+IoVp6BshIZs1m8+LhgRqLfJEj1znTZDXvAEuTuI3Y9BY
 lyyvGuKNbe6q1aD8Hfu3qiO8PfBrI+pNpOcdw84pG6IwBz4vfLmhzyMd8vTyqoK8
 DIlfYCiGJB0aqDBWhRyql8KM04/gSlEm2eZONsudNuMugvRIxU1IOBaKFwlP5Z98
 y2/mYo/wLnVFKZE6cLp3Lxjpv4ENRJ1HkQe5JQak1ulq+XkUL9f82p7oGMJ4lvoB
 iTOPTkuhhkiUYmwbb97VoqWTYwL+EptvsWto+Mv/glHy7OGXXJFTAD+ARpZc+c5I
 f1/mzQYujmVj91XUi9xSGnL07mNNPOiX3p+9q7Fy+A3Rk1x5n0t+7hvmiuv8paLv
 KNowhECllp0lBKns39tcn8BQvRufvxv2b+QvEqgUPVI3Qj8vEc4=
 =+nxh
 -----END PGP SIGNATURE-----

Merge tag 'pinctrl-v5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control bulk updates from Linus Walleij:
 "Core changes:

   - New standard enumerator and corresponding device tree bindings for
     output impedance pin configuration. (Implemented and used in the
     Renesas rzg2l driver.)

   - Cleanup of Kconfig and Makefile to be somewhat orderly and
     alphabetic.

  New drivers:

   - Samsung Exynos 7885 pin controller.

   - Ocelot LAN966x pin controller.

   - Qualcomm SDX65 pin controller.

   - Qualcomm SM8450 pin controller.

   - Qualcomm PM8019, PM8226 and PM2250 pin controllers.

   - NXP/Freescale i.MXRT1050 pin controller.

   - Intel Thunder Bay pin controller.

  Enhancements:

   - Introduction of the string library helper function
     "kasprintf_strarray()" and subsequent use in Rockchip, ST and
     Armada pin control drivers, as well as the GPIO mockup driver.

   - The Ocelot pin controller has been extensively rewritten to use
     regmap and other modern kernel infrastructure.

   - The Microchip SGPIO driver has been converted to use regmap.

   - The SPEAr driver had been converted to use regmap.

   - Substantial cleanups and janitorial on the Apple pin control driver
     that was merged for v5.16.

   - Janitorial to remove of_node assignments in the GPIO portions that
     anyway get this handled in the GPIO core.

   - Minor cleanups and improvements in several pin controllers"

* tag 'pinctrl-v5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (98 commits)
  pinctrl: imx: fix assigning groups names
  dt-bindings: pinctrl: mt8195: add wrapping node of pin configurations
  pinctrl: bcm: ns: use generic groups & functions helpers
  pinctrl: imx: fix allocation result check
  pinctrl: samsung: Use platform_get_irq_optional() to get the interrupt
  pinctrl: Propagate firmware node from a parent device
  dt-bindings: pinctrl: qcom: Add SDX65 pinctrl bindings
  pinctrl: add one more "const" for generic function groups
  pinctrl: keembay: rework loops looking for groups names
  pinctrl: keembay: comment process of building functions a bit
  pinctrl: imx: prepare for making "group_names" in "function_desc" const
  ARM: dts: gpio-ranges property is now required
  pinctrl: aspeed: fix unmet dependencies on MFD_SYSCON for PINCTRL_ASPEED
  pinctrl: Get rid of duplicate of_node assignment in the drivers
  pinctrl-sunxi: don't call pinctrl_gpio_direction()
  pinctrl-bcm2835: don't call pinctrl_gpio_direction()
  pinctrl: bcm2835: Silence uninit warning
  pinctrl: Sort Kconfig and Makefile entries alphabetically
  pinctrl: Add Intel Thunder Bay pinctrl driver
  dt-bindings: pinctrl: Add bindings for Intel Thunderbay pinctrl driver
  ...
2022-01-12 10:56:08 -08:00
Emil Renner Berthing
ec648f6b76 pinctrl: starfive: Add pinctrl driver for StarFive SoCs
Add a combined pinctrl and GPIO driver for the JH7100 RISC-V SoC by
StarFive Ltd. This is a test chip for their upcoming JH7110 SoC, which
is said to feature only minor changes to these pinctrl/GPIO parts.

For each "GPIO" there are two registers for configuring the output and
output enable signals which may come from other peripherals. Among these
are two special signals that are constant 0 and constant 1 respectively.
Controlling the GPIOs from software is done by choosing one of these
signals. In other words the same registers are used for both pin muxing
and controlling the GPIOs, which makes it easier to combine the pinctrl
and GPIO driver in one.

I wrote the pinconf and pinmux parts, but the GPIO part of the code is
based on the GPIO driver in the vendor tree written by Huan Feng with
cleanups and fixes by Drew and me.

Datasheet: https://github.com/starfive-tech/JH7100_Docs/blob/main/JH7100%20Data%20Sheet%20V01.01.04-EN%20(4-21-2021).pdf
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Co-developed-by: Huan Feng <huan.feng@starfivetech.com>
Signed-off-by: Huan Feng <huan.feng@starfivetech.com>
Co-developed-by: Drew Fustini <drew@beagleboard.org>
Signed-off-by: Drew Fustini <drew@beagleboard.org>
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
2021-12-16 17:24:23 +01:00
Andy Shevchenko
b124c8bd50 pinctrl: Sort Kconfig and Makefile entries alphabetically
Sort Kconfig and Makefile entries alphabetically for better maintenance
in the future.

While at it fix some style issues, such as:
  - "Say Y"/"Say yes"/"Say Yes" --> "Say Y"
  - "pullup/pulldown" --> "pull-up and pull-down"
  - wrong indentation

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20211209113456.33977-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-12-09 14:49:39 +01:00
Lakshmi Sowjanya D
12422af819 pinctrl: Add Intel Thunder Bay pinctrl driver
About Intel Thunder Bay:
-----------------------
Intel Thunder Bay is a computer vision AI accelerator SoC based on ARM CPU.

Pinctrl IP:
----------
The SoC has a customised pinmux controller IP which controls pin
multiplexing and configuration.

Thunder Bay pinctrl IP is not based on and have nothing in common with the
existing pinctrl drivers. The registers used are incompatible with the
existing drivers, so it requires a new driver.

Add pinctrl driver to enable pin control support in the Intel Thunder Bay
SoC.

Co-developed-by: Kiran Kumar S <kiran.kumar1.s@intel.com>
Signed-off-by: Kiran Kumar S <kiran.kumar1.s@intel.com>
Signed-off-by: Lakshmi Sowjanya D <lakshmi.sowjanya.d@intel.com>
Link: https://lore.kernel.org/r/20211201072626.19599-3-lakshmi.sowjanya.d@intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-12-09 03:17:39 +01:00
Joey Gouly
a0f160ffcb pinctrl: add pinctrl/GPIO driver for Apple SoCs
This driver adds support for the pinctrl / GPIO hardware found
on some Apple SoCs.

Co-developed-by: Stan Skowronek <stan@corellium.com>
Signed-off-by: Stan Skowronek <stan@corellium.com>
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Acked-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211026175815.52703-5-joey.gouly@arm.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-10-27 00:16:52 +02:00
Lakshmi Sowjanya D
ffd4e73935 pinctrl: Add Intel Keem Bay pinctrl driver
About Intel Keem Bay:
-------------------
Intel Keem Bay is a computer vision AI accelerator SoC based on ARM CPU.
Documentation of Keem Bay: Documentation/vpu/vpu-stack-overview.rst.

Pinctrl IP:
----------
The SoC has a customised pinmux controller IP which controls pin
multiplexing and configuration.

Keem Bay pinctrl IP is not based on and have nothing in common with the
existing pinctrl drivers. The registers used are incompatible with the
existing drivers, so it requires a new driver.

Add pinctrl driver to enable pin control support in the Intel Keem Bay SoC.

Co-developed-by: Vineetha G. Jaya Kumaran <vineetha.g.jaya.kumaran@intel.com>
Signed-off-by: Vineetha G. Jaya Kumaran <vineetha.g.jaya.kumaran@intel.com>
Co-developed-by: Vijayakannan Ayyathurai <vijayakannan.ayyathurai@intel.com>
Signed-off-by: Vijayakannan Ayyathurai <vijayakannan.ayyathurai@intel.com>
Signed-off-by: Lakshmi Sowjanya D <lakshmi.sowjanya.d@intel.com>
Reviewed-by: Mark Gross <mgross@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210806142527.29113-3-lakshmi.sowjanya.d@intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-08-11 15:13:14 +02:00
Sai Krishna Potthuri
8b242ca700 pinctrl: Add Xilinx ZynqMP pinctrl driver support
Adding pinctrl driver for Xilinx ZynqMP platform.
This driver queries pin information from firmware and registers
pin control accordingly.

Signed-off-by: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com>
Link: https://lore.kernel.org/r/1619080202-31924-4-git-send-email-lakshmi.sai.krishna.potthuri@xilinx.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-04-22 11:13:04 +02:00
Linus Torvalds
8b83369ddc RISC-V Patches for the 5.12 Merge Window
I have a handful of new RISC-V related patches for this merge window:
 
 * A check to ensure drivers are properly using uaccess.  This isn't
   manifesting with any of the drivers I'm currently using, but may catch
   errors in new drivers.
 * Some preliminary support for the FU740, along with the HiFive
   Unleashed it will appear on.
 * NUMA support for RISC-V, which involves making the arm64 code generic.
 * Support for kasan on the vmalloc region.
 * A handful of new drivers for the Kendryte K210, along with the DT
   plumbing required to boot on a handful of K210-based boards.
 * Support for allocating ASIDs.
 * Preliminary support for kernels larger than 128MiB.
 * Various other improvements to our KASAN support, including the
   utilization of huge pages when allocating the KASAN regions.
 
 We may have already found a bug with the KASAN_VMALLOC code, but it's
 passing my tests.  There's a fix in the works, but that will probably
 miss the merge window.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAmA4hXATHHBhbG1lckBk
 YWJiZWx0LmNvbQAKCRAuExnzX7sYifryD/0SfXGOfj93Cxq7I7AYhhzCN7lJ5jvv
 iEQScTlPqU9nfvYodo4EDq0fp+5LIPpTL/XBHtqVjzv0FqRNa28Ea0K7kO8HuXc4
 BaUd0m/DqyB4Gfgm4qjc5bDneQ1ZYxVXprYERWNQ5Fj+tdWhaQGOW64N/TVodjjj
 NgJtTqbIAcjJqjUtttM8TZN5U1TgwLo+KCqw3iYW12lV1YKBBuvrwvSdD6jnFdIQ
 AzG/wRGZhxLoFxgBB/NEsZxDoSd6ztiwxLhS9lX4okZVsryyIdOE70Q/MflfiTlU
 xE+AdxQXTMUiiqYSmHeDD6PDb57GT/K3hnjI1yP+lIZpbInsi29JKow1qjyYjfHl
 9cSSKYCIXHL7jKU6pgt34G1O5N5+fgqHQhNbfKvlrQ2UPlfs/tWdKHpFIP/z9Jlr
 0vCAou7NSEB9zZGqzO63uBLXoN8yfL8FT3uRnnRvoRpfpex5dQX2QqPLQ7327D7N
 GUG31nd1PHTJPdxJ1cI4SO24PqPpWDWY9uaea+0jv7ivGClVadZPco/S3ZKloguT
 lazYUvyA4oRrSAyln785Rd8vg4CinqTxMtIyZbRMbNkgzVQARi9a8rjvu4n9qms2
 2wlXDFi8nR8B4ih5n79dSiiLM9ay9GJDxMcf9VxIxSAYZV2fJALnpK6gV2fzRBUe
 +k/uv8BIsFmlwQ==
 =CutX
 -----END PGP SIGNATURE-----

Merge tag 'riscv-for-linus-5.12-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux

Pull RISC-V updates from Palmer Dabbelt:
 "A handful of new RISC-V related patches for this merge window:

   - A check to ensure drivers are properly using uaccess. This isn't
     manifesting with any of the drivers I'm currently using, but may
     catch errors in new drivers.

   - Some preliminary support for the FU740, along with the HiFive
     Unleashed it will appear on.

   - NUMA support for RISC-V, which involves making the arm64 code
     generic.

   - Support for kasan on the vmalloc region.

   - A handful of new drivers for the Kendryte K210, along with the DT
     plumbing required to boot on a handful of K210-based boards.

   - Support for allocating ASIDs.

   - Preliminary support for kernels larger than 128MiB.

   - Various other improvements to our KASAN support, including the
     utilization of huge pages when allocating the KASAN regions.

  We may have already found a bug with the KASAN_VMALLOC code, but it's
  passing my tests. There's a fix in the works, but that will probably
  miss the merge window.

* tag 'riscv-for-linus-5.12-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (75 commits)
  riscv: Improve kasan population by using hugepages when possible
  riscv: Improve kasan population function
  riscv: Use KASAN_SHADOW_INIT define for kasan memory initialization
  riscv: Improve kasan definitions
  riscv: Get rid of MAX_EARLY_MAPPING_SIZE
  soc: canaan: Sort the Makefile alphabetically
  riscv: Disable KSAN_SANITIZE for vDSO
  riscv: Remove unnecessary declaration
  riscv: Add Canaan Kendryte K210 SD card defconfig
  riscv: Update Canaan Kendryte K210 defconfig
  riscv: Add Kendryte KD233 board device tree
  riscv: Add SiPeed MAIXDUINO board device tree
  riscv: Add SiPeed MAIX GO board device tree
  riscv: Add SiPeed MAIX DOCK board device tree
  riscv: Add SiPeed MAIX BiT board device tree
  riscv: Update Canaan Kendryte K210 device tree
  dt-bindings: add resets property to dw-apb-timer
  dt-bindings: fix sifive gpio properties
  dt-bindings: update sifive uart compatible string
  dt-bindings: update sifive clint compatible string
  ...
2021-02-26 10:28:35 -08:00
Damien Le Moal
d4c34d09ab
pinctrl: Add RISC-V Canaan Kendryte K210 FPIOA driver
Add the pinctrl-k210.c pinctrl driver for the Canaan Kendryte K210
field programmable IO array (FPIOA) to allow configuring the SoC pin
functions. The K210 has 48 programmable pins which can take any of 256
possible functions.

This patch is inspired from the k210 pinctrl driver for the u-boot
project and contains many direct contributions from Sean Anderson.

The MAINTAINERS file is updated, adding the entry "CANAAN/KENDRYTE K210
SOC FPIOA DRIVER" with myself listed as maintainer for this driver.

Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-02-18 23:18:01 -08:00
Arnd Bergmann
4ef82b3052 pinctrl: remove ste u300 driver
The ST-Ericsson U300 platform is getting removed, so this driver is no
longer needed.

Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210120132045.2127659-6-arnd@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-01-21 09:53:51 +01:00
Arnd Bergmann
5817364a90 pinctrl: remove coh901 driver
The ST-Ericsson U300 platform is getting removed, so this driver is no
longer needed.

Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210120132045.2127659-5-arnd@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-01-21 09:53:40 +01:00
Arnd Bergmann
c41e02c384 pinctrl: remove sirf atlas/prima drivers
The CSR SiRF prima2/atlas platforms are getting removed, so this driver
is no longer needed.

Cc: Barry Song <baohua@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Barry Song <baohua@kernel.org>
Link: https://lore.kernel.org/r/20210120132045.2127659-4-arnd@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-01-21 09:53:26 +01:00
Arnd Bergmann
484c58d660 pinctrl: remove zte zx driver
The zte zx platform is getting removed, so this driver is no
longer needed.

Cc: Jun Nie <jun.nie@linaro.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210120132045.2127659-3-arnd@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-01-21 09:53:15 +01:00
Linus Torvalds
f68e4041ef This is the bulk of pin control changes for the v5.11 kernel:
New drivers:
 
 - New driver for the Microchip Serial GPIO "SGPIO".
 
 - Qualcomm SM8250 LPASS (Low Power Audio Subsystem) GPIO driver.
 
 New subdrivers:
 
 - Intel Lakefield subdriver.
 
 - Intel Elkhart Lake subdriver.
 
 - Intel Alder Lake-S subdriver.
 
 - Qualcomm MSM8953 subdriver.
 
 - Qualcomm SDX55 subdriver.
 
 - Qualcomm SDX55 PMIC subdriver.
 
 - Ocelot Luton SoC subdriver.
 
 - Ocelot Serval SoC subdriver.
 
 Modularization:
 
 - The Meson driver can now be built as modules.
 
 - The Qualcomm driver(s) can now be built as modules.
 
 Incremental improvements:
 
 - The Intel driver now supports pin configuration for GPIO-related
   configurations.
 
 - A bunch of Renesas PFC drivers have been augmented with support
   for QSPI pins, groups and functions.
 
 - Non-critical fixes to the irq handling in the Allwinner Sunxi
   driver.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEElDRnuGcz/wPCXQWMQRCzN7AZXXMFAl/ab9AACgkQQRCzN7AZ
 XXOp5w/7B3JTngCneTa8jBG8rPv94zWMpnqvXBPhK1AZPB53IR48F2ssJMIhwJsj
 4QRVjPhnrowqEZjOxr5Ia+pjnQvPL5JP8F/xKiZf5BpS6ccvQQFKdUcDHYzllffr
 davHSReb1YIDSST8M/iO9Iqjl2r6/5wLg0OQR26CpDhJc29I93xQA08OuLhqa33v
 SibmlCeizScn39gCcwZmfrdvJMPYcUE7zE1v38LgDAp9vt2dsdwAUQ6n8GBQYJF9
 NgBA4LwLYlbVHEdhd/I8mNmAbKSpeHxFgKSEWyAaqYRDZkBmsHAEiliWVcnnBmW3
 kH76FC+jMHW5dDII8vMAKB5c1Col/7GM4722+NnolPO9vTs93hT0aNy3l5Eh/nWN
 DUIZOqvMW4c5M5XZ8prKuTdBfCc3jC3BKiaTKQm/wJMY4SQpTjerB4jnWqRrzTus
 tlndz8bezQxwKkx8BAhLc5pE1zQEn5ZznLXqy62RMwd6ymdtOg4ZALQ9nyj2luaP
 cGoODMHNHA7BuaZ+dcIoikElCdeSiTNEfO53/UQiVi8BOx0zNT6ul9VlIgC+Utsk
 DVYAExg+yF5qw+2xhJxBoK4DqqVSe7xTbqrcY1oLdnWhfz8yGkHh91ONos+9u1sY
 2vnjNW4BIfSgEApbZIb7KRS0VCKXh4BzdI9+W9uKhsn6JIYyo1g=
 =e5sV
 -----END PGP SIGNATURE-----

Merge tag 'pinctrl-v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
 "This is the bulk of pin control changes for the v5.11 kernel.

  Drivers, drivers and drivers. Not a single core change.

  Some new stuff, especially a bunch of new Intel, Qualcomm and Ocelot
  SoCs.

  As part of the modularization attempt, I applied one patch affecting
  the firmware subsystem as a functional (not syntactic/semantic)
  dependency and then it blew up in our face, so I had to revert it,
  bummer. It will come in later, through that subsystem, I guess.

  New drivers:

   - New driver for the Microchip Serial GPIO "SGPIO".

   - Qualcomm SM8250 LPASS (Low Power Audio Subsystem) GPIO driver.

  New subdrivers:

   - Intel Lakefield subdriver.

   - Intel Elkhart Lake subdriver.

   - Intel Alder Lake-S subdriver.

   - Qualcomm MSM8953 subdriver.

   - Qualcomm SDX55 subdriver.

   - Qualcomm SDX55 PMIC subdriver.

   - Ocelot Luton SoC subdriver.

   - Ocelot Serval SoC subdriver.

  Modularization:

   - The Meson driver can now be built as modules.

   - The Qualcomm driver(s) can now be built as modules.

  Incremental improvements:

   - The Intel driver now supports pin configuration for GPIO-related
     configurations.

   - A bunch of Renesas PFC drivers have been augmented with support for
     QSPI pins, groups and functions.

   - Non-critical fixes to the irq handling in the Allwinner Sunxi
     driver"

* tag 'pinctrl-v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (80 commits)
  pinctrl/spear: simplify the return expression of spear300_pinctrl_probe()
  pinctrl: mediatek: simplify the return expression of mtk_pinconf_bias_disable_set_rev1()
  dt-bindings: pinctrl: pinctrl-microchip-sgpio: Add irq support
  pinctrl: pinctrl-microchip-sgpio: Add irq support (for sparx5)
  pinctrl: qcom: Add sm8250 lpass lpi pinctrl driver
  dt-bindings: pinctrl: qcom: Add sm8250 lpass lpi pinctrl bindings
  pinctrl: qcom-pmic-gpio: Add support for pmx55
  dt-bindings: pinctrl: qcom-pmic-gpio: Add pmx55 support
  pinctrl: pinctrl-microchip-sgpio: Mark some symbols with static keyword
  pinctrl: at91-pio4: Make PINCTRL_AT91PIO4 depend on HAS_IOMEM to fix build error
  pinctrl: mtk: Fix low level output voltage issue
  pinctrl: falcon: add missing put_device() call in pinctrl_falcon_probe()
  pinctrl: actions: pinctrl-s500: Constify s500_padinfo[]
  pinctrl: pinctrl-microchip-sgpio: Add OF config dependency
  pinctrl: pinctrl-microchip-sgpio: Add pinctrl driver for Microsemi Serial GPIO
  dt-bindings: pinctrl: Add bindings for pinctrl-microchip-sgpio driver
  pinctrl: at91-pio4: add support for fewer lines on last PIO bank
  pinctrl: sunxi: Always call chained_irq_{enter, exit} in sunxi_pinctrl_irq_handler
  pinctrl: sunxi: Mark the irq bank not found in sunxi_pinctrl_irq_handler() with WARN_ON
  pinctrl: sunxi: fix irq bank map for the Allwinner A100 pin controller
  ...
2020-12-16 15:02:49 -08:00
Sergio Paracuellos
518b466a21 pinctrl: ralink: add a pinctrl driver for the rt2880 family
These Socs have 1-3 banks of 8-32 gpios. Rather then setting the muxing of each
pin individually, these socs have mux groups that when set will effect 1-N pins.
Pin groups have a 2, 4 or 8 different muxes.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20201208075523.7060-3-sergio.paracuellos@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-08 09:58:01 +01:00
Lars Povlsen
7e5ea974e6 pinctrl: pinctrl-microchip-sgpio: Add pinctrl driver for Microsemi Serial GPIO
This adds a pinctrl driver for the Microsemi/Microchip Serial GPIO
(SGPIO) device used in various SoC's.

The driver is added as a pinctrl driver, albeit only having just GPIO
support currently. The hardware supports other functions that will be
added following.

Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
Link: https://lore.kernel.org/r/20201113145151.68900-3-lars.povlsen@microchip.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-12-02 00:09:48 +01:00
Linus Walleij
e777f8c8f9 pinctrl: renesas: Updates for v5.10
- Add CAN and USB1 PWEN pin groups on R-Car H2 and RZ/G1,
   - Three more conversion of DT bindings to json-schema,
   - Group all Renesas pinctrl drivers and improve visual Kconfig
     structure,
   - Rename drivers/pinctrl/sh-pfc to drivers/pinctrl/renesas,
   - Minor fixes and improvements.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCX2SoaQAKCRCKwlD9ZEnx
 cKV6AP48BYvs8Fu3dd08ZRI3w82K56GQEi+9pJh+krkyQc8ODQD+JKbR48O15cN5
 cQ0sJuVyAVRhEf9N7OerkbbBUCM+pQ8=
 =jKcz
 -----END PGP SIGNATURE-----

Merge tag 'renesas-pinctrl-for-v5.10-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel

pinctrl: renesas: Updates for v5.10

  - Add CAN and USB1 PWEN pin groups on R-Car H2 and RZ/G1,
  - Three more conversion of DT bindings to json-schema,
  - Group all Renesas pinctrl drivers and improve visual Kconfig
    structure,
  - Rename drivers/pinctrl/sh-pfc to drivers/pinctrl/renesas,
  - Minor fixes and improvements.
2020-09-21 23:43:30 +02:00
Geert Uytterhoeven
077365a941 pinctrl: Rename sh-pfc to renesas
The drivers/pinctrl/sh-pfc subdirectory was originally created to group
pin control drivers for various Renesas SuperH and SH-Mobile platforms.
However, the name "sh-pfc" no longer reflects its contents, as the
directory now contains pin control drivers for Renesas SuperH, ARM32,
and ARM64 SoCs.

Hence rename the subdirectory from drivers/pinctrl/sh-pfc to
drivers/pinctrl/renesas, and the related Kconfig symbol from
PINCTRL_SH_PFC to PINCTRL_RENESAS.

Rename the git branch in MAINTAINERS, too, for consistency.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20200909131534.12897-3-geert+renesas@glider.be
2020-09-15 10:04:35 +02:00
Kuninori Morimoto
af028ecd54 pinctrl: sh-pfc: Collect Renesas related CONFIGs in one place
Renesas related pinctrl CONFIGs are located in many places, which is
confusing.
This patch collects them into the same place, grouped in a new "Renesas
pinctrl drivers" menu.
This patch also moves pinctrl-rz{a1,a2,n1}.c into the sh-pfc folder.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87k0xoy4r7.wl-kuninori.morimoto.gx@renesas.com
[geert: Update path in MAINTAINERS]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-09-15 09:37:20 +02:00
Nobuhiro Iwamatsu
a68a784426 pinctrl: visconti: Add Toshiba Visconti SoCs pinctrl support
Add pinctrl support to Toshiba Visconti SoCs.

Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Reviewed-by: Punit Agrawal <punit1.agrawal@toshiba.co.jp>
Link: https://lore.kernel.org/r/20200909204336.2558-3-nobuhiro1.iwamatsu@toshiba.co.jp
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-09-12 12:25:53 +02:00
Andy Shevchenko
0f04a81784 pinctrl: mcp23s08: Split to three parts: core, I²C, SPI
Split the driver to three parts: core, I²C, SPI.
No functional change intended.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200407173849.43628-9-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-04-16 14:21:23 +02:00
Marco Felsch
56cc3af4e8 pinctrl: da9062: add driver support
The DA9062 is a mfd pmic device which supports 5 GPIOs. The GPIOs can
be used as input, output or have a special use-case.

The patch adds the support for the normal input/output use-case.

Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Link: https://lore.kernel.org/r/20200108104746.1765-4-m.felsch@pengutronix.de
Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-02-19 17:16:31 +01:00
Rahul Tanwar
1948d5c51d pinctrl: Add pinmux & GPIO controller driver for a new SoC
Intel Lightning Mountain SoC has a pinmux controller & GPIO controller IP which
controls pin multiplexing & configuration including GPIO functions selection &
GPIO attributes configuration.

This IP is not based on & does not have anything in common with Chassis
specification. The pinctrl drivers under pinctrl/intel/* are all based upon
Chassis spec compliant pinctrl IPs. So this driver doesn't fit & can not use
pinctrl framework under pinctrl/intel/* and it requires a separate new driver.

Add a new GPIO & pin control framework based driver for this IP.

Signed-off-by: Rahul Tanwar <rahul.tanwar@linux.intel.com>
Link: https://lore.kernel.org/r/33e649758b70490f01724a887c490d5008c7656d.1573797249.git.rahul.tanwar@linux.intel.com
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-11-21 14:47:44 +01:00
Linus Torvalds
ebcf5bb282 - Core Frameworks
- Document (kerneldoc) core mfd_add_devices() API
 
  - New Drivers
    - Add support for Altera SOCFPGA System Manager
    - Add support for Maxim MAX77650/77651 PMIC
    - Add support for Maxim MAX77663 PMIC
    - Add support for ST Multi-Function eXpander (STMFX)
 
  - New Device Support
    - Add support for LEDs to Intel Cherry Trail Whiskey Cove PMIC
    - Add support for RTC to SAMSUNG Electronics S2MPA01 PMIC
    - Add support for SAM9X60 to Atmel HLCDC (High-end LCD Controller)
    - Add support for USB X-Powers AXP 8xx PMICs
    - Add support for Integrated Sensor Hub (ISH) to ChromeOS EC
    - Add support for USB PD Logger to ChromeOS EC
    - Add support for AXP223 to X-Powers AXP series PMICs
    - Add support for Power Supply to X-Powers AXP 803 PMICs
    - Add support for Comet Lake to Intel Low Power Subsystem
    - Add support for Fingerprint MCU to ChromeOS EC
    - Add support for Touchpad MCU to ChromeOS EC
    - Move TI LM3532 support to LED
 
  - New Functionality
    - Add/extend DT support; max77650, max77620
    - Add support for power-off; max77620
    - Add support for clocking; syscon
    - Add support for host sleep event; cros_ec
 
  - Fix-ups
    - Trivial; Formatting, spelling, etc; Kconfig, sec-core, ab8500-debugfs
    - Remove unused functionality; rk808, da9063-*
    - SPDX conversion; da9063-*, atmel-*,
    - Adapt/add new register definitions; cs47l35-tables, cs47l90-tables, imx6q-iomuxc-gpr
    - Fix-up DT bindings; ti-lmu, cirrus,lochnagar
    - Simply obtaining driver data; ssbi, t7l66xb, tc6387xb, tc6393xb
 
  - Bug Fixes
    - Fix incorrect defined values; max77620, da9063
    - Fix device initialisation; twl6040
    - Reset device on init; intel-lpss
    - Fix build warnings when !OF; sun6i-prcm
    - Register OF match tables; tps65912-spi
    - Fix DMI matching; intel_quark_i2c_gpio
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEdrbJNaO+IJqU8IdIUa+KL4f8d2EFAlzame0ACgkQUa+KL4f8
 d2GbBQ//bUoA+hcTo/ZUyQQGmE8axikZ6pacY+Y41pdzzLFoOM3IIz4NpdUF0fP2
 6r11zDiM2cL9CuMJl/AMiBv7fifowYykaBUEkkm8n2Cpj/bpLIm8eQy6jf14kqNR
 gj9sTy/feBcnZhqLLx9x9W9695nRTE4q3g+mDOj5sXRvZxqcPBaNgWkk5a8vtN9V
 yH2XkQSoK0EvvNWjl3pshp7HdKhX8k1xDZ2ghOi3Yk9JmFlg+wrWEKE4KQ7dDoUa
 SFXFReIwyleAw4Bc/demT1tSDiNgIPc9ZHtb67dUmDCQgpQqTK/h6WV1JeW1I0vh
 AM6n2hnogcbVcJdAHtwS5tR6nVahpUQ1V+XhYDyyHNmx6rqW5q2e3xRF75CT4wBZ
 NMIVaWNlih62Y196Exy+6CANHvJyxL6yRgvXkpfyaf9vYdXUrBRUujxn1PzrbkNJ
 kJwvZk5yHgg0n5SIV/D4CVy+RHP6uqe4oE4iXNWP5Um06OyVCieqMvoduyGQdLG/
 7Xrflc4EmeqTfWZrnW3ljh6sOBC+MQCfIKgRtvkPQ5EpcNU2VPXeNsAvIIHCpWHy
 HJY43WRP98DTNyP+/oBrsh56y8n+NwMBcWSmL4tv4cKmGx11bRvp35Mzy1ElPw6Y
 Zzttsw8Puz2EMmfGdcRwkZW0KWb5sAvJcImCkrjg/13QPHgcPgk=
 =dTSD
 -----END PGP SIGNATURE-----

Merge tag 'mfd-next-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "Core Framework:
   - Document (kerneldoc) core mfd_add_devices() API

  New Drivers:
   - Altera SOCFPGA System Manager
   - Maxim MAX77650/77651 PMIC
   - Maxim MAX77663 PMIC
   - ST Multi-Function eXpander (STMFX)

  New Device Support:
   - LEDs support in Intel Cherry Trail Whiskey Cove PMIC
   - RTC support in SAMSUNG Electronics S2MPA01 PMIC
   - SAM9X60 support in Atmel HLCDC (High-end LCD Controller)
   - USB X-Powers AXP 8xx PMICs
   - Integrated Sensor Hub (ISH) in ChromeOS EC
   - USB PD Logger in ChromeOS EC
   - AXP223 in X-Powers AXP series PMICs
   - Power Supply in X-Powers AXP 803 PMICs
   - Comet Lake in Intel Low Power Subsystem
   - Fingerprint MCU in ChromeOS EC
   - Touchpad MCU in ChromeOS EC
   - Move TI LM3532 support to LED

  New Functionality:
   - max77650, max77620: Add/extend DT support
   - max77620 power-off
   - syscon clocking
   - croc_ec host sleep event

  Fix-ups:
   - Trivial; Formatting, spelling, etc; Kconfig, sec-core, ab8500-debugfs
   - Remove unused functionality; rk808, da9063-*
   - SPDX conversion; da9063-*, atmel-*,
   - Adapt/add new register definitions; cs47l35-tables, cs47l90-tables, imx6q-iomuxc-gpr
   - Fix-up DT bindings; ti-lmu, cirrus,lochnagar
   - Simply obtaining driver data; ssbi, t7l66xb, tc6387xb, tc6393xb

  Bug Fixes:
   - Fix incorrect defined values; max77620, da9063
   - Fix device initialisation; twl6040
   - Reset device on init; intel-lpss
   - Fix build warnings when !OF; sun6i-prcm
   - Register OF match tables; tps65912-spi
   - Fix DMI matching; intel_quark_i2c_gpio"

* tag 'mfd-next-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (65 commits)
  mfd: Use dev_get_drvdata() directly
  mfd: cros_ec: Instantiate properly CrOS Touchpad MCU device
  mfd: cros_ec: Instantiate properly CrOS FP MCU device
  mfd: cros_ec: Update the EC feature codes
  mfd: intel-lpss: Add Intel Comet Lake PCI IDs
  mfd: lochnagar: Add links to binding docs for sound and hwmon
  mfd: ab8500-debugfs: Fix a typo ("deubgfs")
  mfd: imx6sx: Add MQS register definition for iomuxc gpr
  dt-bindings: mfd: LMU: Fix lm3632 dt binding example
  mfd: intel_quark_i2c_gpio: Adjust IOT2000 matching
  mfd: da9063: Fix OTP control register names to match datasheets for DA9063/63L
  mfd: tps65912-spi: Add missing of table registration
  mfd: axp20x: Add USB power supply mfd cell to AXP803
  mfd: sun6i-prcm: Fix build warning for non-OF configurations
  mfd: intel-lpss: Set the device in reset state when init
  platform/chrome: Add support for v1 of host sleep event
  mfd: cros_ec: Add host_sleep_event_v1 command
  mfd: cros_ec: Instantiate the CrOS USB PD logger driver
  mfd: cs47l90: Make DAC_AEC_CONTROL_2 readable
  mfd: cs47l35: Make DAC_AEC_CONTROL_2 readable
  ...
2019-05-14 10:39:08 -07:00
Amelie Delaunay
1490d9f841 pinctrl: Add STMFX GPIO expander Pinctrl/GPIO driver
This patch adds pinctrl/GPIO driver for STMicroelectronics
Multi-Function eXpander (STMFX) GPIO expander.
STMFX is an I2C slave controller, offering up to 24 GPIOs.
The driver relies on generic pin config interface to configure the GPIOs.

Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-10 08:21:31 +01:00
Manivannan Sadhasivam
8f3f024696 pinctrl: Add pinctrl support for BM1880 SoC
Add pinctrl support for Bitmain BM1880 SoC. The driver only handles
pinmuxing as the SoC is not capable of handling pinconf.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-05-03 07:53:13 +01:00
Chris Brandt
b59d0e7827 pinctrl: Add RZ/A2 pin and gpio controller
Adds support for the pin and gpio controller found in R7S9210 (RZ/A2) SoCs.

Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-11-23 09:30:27 +01:00
Linus Walleij
b0b378acde pinctrl: sh-pfc: Updates for v4.20 (take three)
- Add support for the new RZ/N1D (R9A06G032) and RZ/N1S (R9A06G033)
     SoCs,
   - Add INTC-EX pin groups on R-Car E3.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCW7dQmQAKCRCKwlD9ZEnx
 cB04AQCj1PoCEotqH9TGaGeVXal35LUMP279vz3HoJweY0DF2AD/QKd/jC2mHz/c
 EypfJAvBvckw9AsdfNSacrCIdMNg7gE=
 =gtgr
 -----END PGP SIGNATURE-----

Merge tag 'sh-pfc-for-v4.20-tag3' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel

pinctrl: sh-pfc: Updates for v4.20 (take three)

  - Add support for the new RZ/N1D (R9A06G032) and RZ/N1S (R9A06G033)
    SoCs,
  - Add INTC-EX pin groups on R-Car E3.
2018-10-10 11:15:33 +02:00
Phil Edworthy
4e53b50047 pinctrl: renesas: Renesas RZ/N1 pinctrl driver
This provides a pinctrl driver for the Renesas RZ/N1 device family.

Based on a patch originally written by Michel Pollet at Renesas.

Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-10-02 12:16:47 +02:00
Tomer Maimon
3b588e43ee pinctrl: nuvoton: add NPCM7xx pinctrl and GPIO driver
Add Nuvoton BMC NPCM750/730/715/705 Pinmux and
GPIO controller driver.

Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
[Add back select GPIO_GENERIC]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-08-29 10:28:42 +02:00
Lee Jones
e5ff19cf75 Immutable branch (mfd, chrome) due for the v4.19 window
Immutable Branch which moves the cros_ec_i2c and cros_ec_spi
 transport drivers from mfd to platform/chrome. Changes in arm are a simple
 rename in defconfigs. Change in input is a rename in help text.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE6gYDF28Li+nEiKLaHwn1ewov5lgFAltCtRsACgkQHwn1ewov
 5lhIQg//fEoZkDIjFsWIDn2WB1brLS2q7Wnv01NJR3/ZxzA29JYQ1lNA3nCM5mVS
 Bf1RqPfVwIO6/d+QA5AnxLBRpRYJ7F7NKwvTvrqQ9QpFPNOLk0m7uUNYSsWTOqlA
 uoReeFfJ2/UuUavd04KJRPv1ilCjoki2Wyc4lqVFSJSGZZjDWUOASAiOd666h26F
 avW4qBUpJm7mmAfOFh76g6c/Jq713fJkqfdRcstRajB13oLjotfRxa/Rhxb+y8aX
 RrlNz8PChIjpYTQ7yDwfLU8u5TDg2sEtz8529YaddDNBWkRyC2BIrKrkev+GIiUx
 SZiPT7nmvpEOGJoPQodUa5bgE/9db7pPKb7XqUNmYQIS71jtLaOXMNje9uLn2NHo
 CJtoVHJXZ9YWyODn1NPvFM28aysis14PWQGWK1HRq5PCfb8TpZ8W0QTaJV18pUBe
 vdrmgxPcdnkAn0Tbt92oBiUrsVT3zoSQuLw9FPuy3ne9Oz+TKHa6kKzjcMMkynwb
 mFmDhf822mfbUVkjUpNTtLJ0UMsNtd/tphDUmv1OQDRNStZS/MI4+xr23bPZbf/X
 blrIjz5fM6uhUbHSKztWnntGAtzbEy75zzyhh2w99JVzJtK4UK+3ET40Kko4KUIx
 1ppYa2wOJVVSvd733O8mYGmzQotKuFc5lyNozlB4EUT8ro/zW1Q=
 =EhHj
 -----END PGP SIGNATURE-----

Merge branches 'ib-mfd-4.19', 'ib-mfd-gpio-pinctrl-4.19', 'ib-mfd-i915-media-platform-4.19' and 'ib-mfd-regulator-4.19', tag 'ib-platform-chrome-mfd-move-cros-ec-transport-for-4.19' into ibs-for-mfd-merged

Immutable branch (mfd, chrome) due for the v4.19 window

Immutable Branch which moves the cros_ec_i2c and cros_ec_spi
transport drivers from mfd to platform/chrome. Changes in arm are a simple
rename in defconfigs. Change in input is a rename in help text.
2018-07-27 08:11:37 +01:00
Richard Fitzgerald
218d72a77b pinctrl: madera: Add driver for Cirrus Logic Madera codecs
These codecs have a variable number of I/O lines each of which
is individually selectable to a wide range of possible functions.

The functionality is slightly different from the traditional muxed
GPIO since most of the functions can be mapped to any pin (and even
the same function to multiple pins). Most pins have a dedicated
"alternate" function that is only available on that pin. The
alternate functions are usually a group of signals, though it is
not always necessary to enable the full group, depending on the
alternate function and how it is to be used. The mapping between
alternate functions and GPIO pins varies between codecs depending
on the number of alternate functions and available pins.

Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-06-05 11:15:23 +01:00
Manivannan Sadhasivam
2242ddfbf4 pinctrl: actions: Add Actions S900 pinctrl driver
Add pinctrl driver for Actions Semi S900 SoC. The driver supports
pinctrl, pinmux and pinconf functionalities through a range of registers
common to both gpio driver and pinctrl driver.

Pinmux functionality is available only for the pin groups while the
pinconf functionality is available for both pin groups and individual
pins.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-02 14:36:08 +02:00
Linus Torvalds
77624cd2a7 Pin control bulk changes for the v4.17 kernel cycle:
New drivers:
 
 - Qualcomm SDM845: this is their new flagship SoC platform
   which seems to be targeted at premium mobile handsets.
 
 - Renesas R-Car M3-N SoC.
 
 - Renesas R8A77980 SoC.
 
 - NXP (ex Freescale) i.MX 6SLL SoC.
 
 - Mediatek MT2712 SoC.
 
 - Allwinner H6 SoC.
 
 Improvements:
 
 - Uniphier adds a few new functions and pins.
 
 - Renesas refactorings and additional pin definitions.
 
 - Improved pin groups for Axis Artpec6.
 
 Cleanup:
 
 - Drop the TZ1090 drivers. This platform is no longer
   maintained and is being deleted.
 
 - Drop ST-Ericsson U8540/U9540 support as this was never
   productified.
 
 - Overall minor fixes and janitorial.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJawz1oAAoJEEEQszewGV1zWUUQAJEIXW0vEsgwwFCIQYrKZBbi
 ovfQtpPgv5wbRmvLy/IaIFvO7eFedlOqjLTU0a3wuFZdHn9y0VkebVOjdG97TTeF
 g4fyqQ7pzdCKmxlDMm4zcOUycho9ZMa8lG3tKdyxI4tal6ygl81BypzKVi/WIxLA
 po2Vr1MHfKicWyPbgD1VRJV6oSzXSOMFkEcPUqx+6m5OM/GTKTKasU/fa4uu12jI
 OHF1TVr9glMbPiU0wC8bvKilgXCxhDYMYf1JCaxojr0Rt/DlR2vBgbfU7dIeRtO1
 MJ1nyJm0yZQfN/bBV1roSg/GGRS3jGbdHDzMnK8pI6LJNJYRa6vfLD/NHKUciSnf
 5cgpWloyvR+rbfObr6CYTirKE7iGBYvAH+do2TwmfvfwUYOI9lnbJrtnqtIovdVA
 R5FxrvI/Ol/j2t4V5wZGC1BBDsC6GH/1YV+W+n9fwKMdDIRgEsOTFsCNEWmSShWP
 Z53NzyZRVL32RK35g3WEqicfXOtmw3XXuHJZqWjlmXyVitEElMAVWySd6oG0HhvU
 sdRaoVGjXL9EVM3iZrqHtaRazRjItBA2CFnloC1PVjwi+dkHDcwWDvtOur+AF3wz
 VORi0xlWXd0Gzolo/ccsk7JUVmrkfCDnZx9uiTKQ+jgiSDfoEuQOvBfTI6LdeoNY
 upTZIfEhR/dMcjcdKIKe
 =IT6S
 -----END PGP SIGNATURE-----

Merge tag 'pinctrl-v4.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control bulk updates from Linus Walleij:
 "New drivers:

   - Qualcomm SDM845: this is their new flagship SoC platform which
     seems to be targeted at premium mobile handsets.

   - Renesas R-Car M3-N SoC.

   - Renesas R8A77980 SoC.

   - NXP (ex Freescale) i.MX 6SLL SoC.

   - Mediatek MT2712 SoC.

   - Allwinner H6 SoC.

  Improvements:

   - Uniphier adds a few new functions and pins.

   - Renesas refactorings and additional pin definitions.

   - Improved pin groups for Axis Artpec6.

  Cleanup:

   - Drop the TZ1090 drivers. This platform is no longer maintained and
     is being deleted.

   - Drop ST-Ericsson U8540/U9540 support as this was never
     productified.

   - Overall minor fixes and janitorial"

* tag 'pinctrl-v4.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (82 commits)
  pinctrl: uniphier: add UART hardware flow control pin-mux settings
  pinctrl: sunxi: add support for the Allwinner H6 main pin controller
  pinctrl: sunxi: change irq_bank_base to irq_bank_map
  pinctrl: sunxi: introduce IRQ bank conversion function
  pinctrl: sunxi: refactor irq related register function to have desc
  pinctrl: msm8998: Remove owner assignment from platform_driver
  pinctrl: uniphier: divide I2S and S/PDIF audio out pin-mux group
  pinctrl: uniphier: add PXs2 Audio in/out pin-mux settings
  pinctrl/amd: poll InterruptEnable bits in enable_irq
  pinctrl: ocelot: fix gpio direction
  pinctrl: mtk: fix check warnings.
  pintcrl: mtk: support bias-disable of generic and special pins simultaneously
  pinctrl: add mt2712 pinctrl driver
  pinctrl: pinctrl-single: Fix pcs_request_gpio() when bits_per_mux != 0
  pinctrl: imx: Add pinctrl driver support for imx6sll
  dt-bindings: imx: update pinctrl doc for imx6sll
  pinctrl: intel: Implement intel_gpio_get_direction callback
  pinctrl: stm32: add 'depends on HAS_IOMEM' to fix unmet dependency
  pinctrl: mediatek: mtk-common: use true and false for boolean values
  pinctrl: sunxi: always look for apb block
  ...
2018-04-03 12:20:54 -07:00
Arnd Bergmann
f59b2dc2de pinctrl: remove adi2/blackfin drivers
The blackfin architecture is getting removed, so these are
now obsolete.

Acked-by: Aaron Wu <aaron.wu@analog.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-26 15:56:55 +02:00
James Hogan
4a7cba71ca pinctrl: Drop TZ1090 drivers
Now that arch/metag/ has been removed, along with TZ1090 SoC support,
remove the TZ1090 pinctrl drivers. They are of no value without the
architecture and SoC platform code.

Signed-off-by: James Hogan <jhogan@kernel.org>
Cc: linux-gpio@vger.kernel.org
Cc: linux-metag@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-01 15:34:15 +01:00
Alexandre Belloni
ce8dc09433 pinctrl: Add Microsemi Ocelot SoC driver
The Microsemi Ocelot SoC has a few pins that can be used as GPIOs or take
multiple other functions. Add a driver for the pinmuxing and the GPIOs.

There is currently no support for interrupts.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-09 14:54:59 +01:00
Sean Wang
d6ed935513 pinctrl: mediatek: add pinctrl driver for MT7622 SoC
Add support for pinctrl on MT7622 SoC. The IO core found on the SoC has
the registers for pinctrl, pinconf and gpio mixed up in the same register
range. However, the IO core for the MT7622 SoC is completely distinct from
anyone of previous MediaTek SoCs which already had support, such as
the hardware internal, register address map and register detailed
definition for each pin.

Therefore, instead, the driver is being newly implemented by reusing
generic methods provided from the core layer with GENERIC_PINCONF,
GENERIC_PINCTRL_GROUPS, and GENERIC_PINMUX_FUNCTIONS for the sake of code
simplicity and rid of superfluous code. Where the function of pins
determined by groups is utilized in this driver which can help developers
less confused with what combinations of pins effective on the SoC and even
reducing the mistakes during the integration of those relevant boards.

As the gpio_chip handling is also only a few lines, the driver also
implements the gpio functionality directly through GPIOLIB.

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Reviewed-by: Biao Huang <biao.huang@mediatek.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-20 08:49:41 +01:00
Quentin Schulz
449317a8b4 pinctrl: move gpio-axp209 to pinctrl
To prepare the driver for the upcoming pinctrl features, move the GPIO
driver AXP209 from GPIO to pinctrl subsystem.

Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-07 10:05:30 +01:00
Greg Kroah-Hartman
b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Linus Torvalds
968c61f7da - New Drivers
- RK805 Power Management IC (PMIC)
    - ROHM BD9571MWV-M MFD Power Management IC (PMIC)
    - Texas Instruments TPS68470 Power Management IC (PMIC) & LEDs
 
  - New Device Support
    - Add support for HiSilicon Hi6421v530 to hi6421-pmic-core
    - Add support for X-Powers AXP806 to axp20x
    - Add support for X-Powers AXP813 to axp20x
    - Add support for Intel Sunrise Point LPSS to intel-lpss-pci
 
  - New Functionality
    - Amend API to provide register layout; atmel-smc
 
 - Fix-ups
    - DT re-work; omap, nokia
    - Header file location change {I2C => MFD}; dm355evm_msp, tps65010
    - Fix chip ID formatting issue(s); rk808
    - Optionally register touchscreen devices; da9052-core
    - Documentation improvements; twl-core
    - Constification; rtsx_pcr, ab8500-core, da9055-i2c, da9052-spi
    - Drop unnecessary static declaration; max8925-i2c
    - Kconfig changes (missing deps and remove module support)
    - Slim down oversized licence statement; hi6421-pmic-core
    - Use managed resources (devm_*); lp87565
    - Supply proper error checking/handling; t7l66xb
 
  - Bug Fixes
    - Fix counter duplication issue; da9052-core
    - Fix potential NULL deference issue; max8998
    - Leave SPI-NOR write-protection bit alone; lpc_ich
    - Ensure device is put into reset during suspend; intel-lpss
    - Correct register offset variable size; omap-usb-tll
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCAAGBQJZsP0YAAoJEFGvii+H/HdhrJUP/RB6BTCDMf3WCi5e6PN8IFST
 JspCcf4bwKVc5lDvORQglVRfBhKY/uSr7F9xlfXtHx8V60ZNo1VOQcyJBTKIz+IJ
 +FQQgM3lEMKIn3QCcu9lKSRomJx55YDnF5SrZ8FzkC8pGLrCYEru5HfqFqOTfPqq
 OH2wZSqiX4H/jYdfVzp3bgqXkDff/nSEGTeFankFkv4wRvLGRxlpVuqkRJcvEJA3
 d8N9MoBBxkZAtAn2j1H5cHyPx5NrBEM2gkXpDfdd+kJNnFzjL72xsXd6rp+N6rcm
 d20eL+1fyJVyvGhGiDOhFwqRAZEqvjPSI4k5kQdRk8IdioGgbmaI74eUbv+rGAKp
 P9QdR7n1ctYyVgwnawIwKTPMzdZo5+9kdagCtu8IBVT02zQqVSDKZM7dAYo2rJuF
 yw24jONcwHFrKA25n1pLJmMbJGHq83kqqw3q5kl17nyArvOOcyspCTODIL9iskhZ
 L0IoIMwQYEj/pnI+iuXl9bJ30v2FIJxyCzUR2u7OJnrH7G27rsoOL0WDqxbp3Dp9
 7tD+6OzMiyIEDxtcd74kjg7g9p5HCmcY3FiDWirmQuZIR3abSET4ap+cTYPdFqVZ
 widS5Pi4PP40ZFN6+4lbBHLlh6MgpHpig9M03kFAr1SyZnH8nf4TnCsFV+wYPyTb
 LR3cKpFeTY8IyFWaLoSg
 =TKIm
 -----END PGP SIGNATURE-----

Merge tag 'mfd-next-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "New Drivers
   - RK805 Power Management IC (PMIC)
   - ROHM BD9571MWV-M MFD Power Management IC (PMIC)
   - Texas Instruments TPS68470 Power Management IC (PMIC) & LEDs

  New Device Support:
   - Add support for HiSilicon Hi6421v530 to hi6421-pmic-core
   - Add support for X-Powers AXP806 to axp20x
   - Add support for X-Powers AXP813 to axp20x
   - Add support for Intel Sunrise Point LPSS to intel-lpss-pci

  New Functionality:
   - Amend API to provide register layout; atmel-smc

  Fix-ups:
   - DT re-work; omap, nokia
   - Header file location change {I2C => MFD}; dm355evm_msp, tps65010
   - Fix chip ID formatting issue(s); rk808
   - Optionally register touchscreen devices; da9052-core
   - Documentation improvements; twl-core
   - Constification; rtsx_pcr, ab8500-core, da9055-i2c, da9052-spi
   - Drop unnecessary static declaration; max8925-i2c
   - Kconfig changes (missing deps and remove module support)
   - Slim down oversized licence statement; hi6421-pmic-core
   - Use managed resources (devm_*); lp87565
   - Supply proper error checking/handling; t7l66xb

  Bug Fixes:
   - Fix counter duplication issue; da9052-core
   - Fix potential NULL deference issue; max8998
   - Leave SPI-NOR write-protection bit alone; lpc_ich
   - Ensure device is put into reset during suspend; intel-lpss
   - Correct register offset variable size; omap-usb-tll"

* tag 'mfd-next-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (61 commits)
  mfd: intel_soc_pmic: Differentiate between Bay and Cherry Trail CRC variants
  mfd: intel_soc_pmic: Export separate mfd-cell configs for BYT and CHT
  dt-bindings: mfd: Add bindings for ZII RAVE devices
  mfd: omap-usb-tll: Fix register offsets
  mfd: da9052: Constify spi_device_id
  mfd: intel-lpss: Put I2C and SPI controllers into reset state on suspend
  mfd: da9055: Constify i2c_device_id
  mfd: intel-lpss: Add missing PCI ID for Intel Sunrise Point LPSS devices
  mfd: t7l66xb: Handle return value of clk_prepare_enable
  mfd: Add ROHM BD9571MWV-M PMIC DT bindings
  mfd: intel_soc_pmic_chtwc: Turn Kconfig option into a bool
  mfd: lp87565: Convert to use devm_mfd_add_devices()
  mfd: Add support for TPS68470 device
  mfd: lpc_ich: Do not touch SPI-NOR write protection bit on Haswell/Broadwell
  mfd: syscon: atmel-smc: Add helper to retrieve register layout
  mfd: axp20x: Use correct platform device ID for many PEK
  dt-bindings: mfd: axp20x: Introduce bindings for AXP813
  mfd: axp20x: Add support for AXP813 PMIC
  dt-bindings: mfd: axp20x: Add AXP806 to supported list of chips
  mfd: Add ROHM BD9571MWV-M MFD PMIC driver
  ...
2017-09-07 13:51:13 -07:00
Baolin Wang
41d32cfce1 pinctrl: sprd: Add Spreadtrum pin control driver
This patch adds the pin control driver for Spreadtrum SC9860 platform.

Signed-off-by: Baolin Wang <baolin.wang@spreadtrum.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-31 09:23:14 +02:00
Joseph Chen
ea479996c7 pinctrl: Add pinctrl driver for the RK805 PMIC
RK805 is one of Rockchip PMICs family, it has 2 output only GPIOs.

This driver is also designed for other Rockchip PMICs to expend.
Different PMIC maybe have different pin features, for example,
RK816 has one pin which can be used for TS or GPIO(input/out).
The mainly difference between PMICs pins are pinmux, direction
and output value, that is 'struct rk805_pin_config'.

Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-08-21 08:54:46 +01:00