- New page table code for both hypervisor and guest stage-2
- Introduction of a new EL2-private host context
- Allow EL2 to have its own private per-CPU variables
- Support of PMU event filtering
- Complete rework of the Spectre mitigation
PPC:
- Fix for running nested guests with in-kernel IRQ chip
- Fix race condition causing occasional host hard lockup
- Minor cleanups and bugfixes
x86:
- allow trapping unknown MSRs to userspace
- allow userspace to force #GP on specific MSRs
- INVPCID support on AMD
- nested AMD cleanup, on demand allocation of nested SVM state
- hide PV MSRs and hypercalls for features not enabled in CPUID
- new test for MSR_IA32_TSC writes from host and guest
- cleanups: MMU, CPUID, shared MSRs
- LAPIC latency optimizations ad bugfixes
For x86, also included in this pull request is a new alternative and
(in the future) more scalable implementation of extended page tables
that does not need a reverse map from guest physical addresses to
host physical addresses. For now it is disabled by default because
it is still lacking a few of the existing MMU's bells and whistles.
However it is a very solid piece of work and it is already available
for people to hammer on it.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl+S8dsUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroM40Af+M46NJmuS5rcwFfybvK/c42KT6svX
Co1NrZDwzSQ2mMy3WQzH9qeLvb+nbY4sT3n5BPNPNsT+aIDPOTDt//qJ2/Ip9UUs
tRNea0MAR96JWLE7MSeeRxnTaQIrw/AAZC0RXFzZvxcgytXwdqBExugw4im+b+dn
Dcz8QxX1EkwT+4lTm5HC0hKZAuo4apnK1QkqCq4SdD2QVJ1YE6+z7pgj4wX7xitr
STKD6q/Yt/0ndwqS0GSGbyg0jy6mE620SN6isFRkJYwqfwLJci6KnqvEK67EcNMu
qeE017K+d93yIVC46/6TfVHzLR/D1FpQ8LZ16Yl6S13OuGIfAWBkQZtPRg==
=AD6a
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"For x86, there is a new alternative and (in the future) more scalable
implementation of extended page tables that does not need a reverse
map from guest physical addresses to host physical addresses.
For now it is disabled by default because it is still lacking a few of
the existing MMU's bells and whistles. However it is a very solid
piece of work and it is already available for people to hammer on it.
Other updates:
ARM:
- New page table code for both hypervisor and guest stage-2
- Introduction of a new EL2-private host context
- Allow EL2 to have its own private per-CPU variables
- Support of PMU event filtering
- Complete rework of the Spectre mitigation
PPC:
- Fix for running nested guests with in-kernel IRQ chip
- Fix race condition causing occasional host hard lockup
- Minor cleanups and bugfixes
x86:
- allow trapping unknown MSRs to userspace
- allow userspace to force #GP on specific MSRs
- INVPCID support on AMD
- nested AMD cleanup, on demand allocation of nested SVM state
- hide PV MSRs and hypercalls for features not enabled in CPUID
- new test for MSR_IA32_TSC writes from host and guest
- cleanups: MMU, CPUID, shared MSRs
- LAPIC latency optimizations ad bugfixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (232 commits)
kvm: x86/mmu: NX largepage recovery for TDP MMU
kvm: x86/mmu: Don't clear write flooding count for direct roots
kvm: x86/mmu: Support MMIO in the TDP MMU
kvm: x86/mmu: Support write protection for nesting in tdp MMU
kvm: x86/mmu: Support disabling dirty logging for the tdp MMU
kvm: x86/mmu: Support dirty logging for the TDP MMU
kvm: x86/mmu: Support changed pte notifier in tdp MMU
kvm: x86/mmu: Add access tracking for tdp_mmu
kvm: x86/mmu: Support invalidate range MMU notifier for TDP MMU
kvm: x86/mmu: Allocate struct kvm_mmu_pages for all pages in TDP MMU
kvm: x86/mmu: Add TDP MMU PF handler
kvm: x86/mmu: Remove disallowed_hugepage_adjust shadow_walk_iterator arg
kvm: x86/mmu: Support zapping SPTEs in the TDP MMU
KVM: Cache as_id in kvm_memory_slot
kvm: x86/mmu: Add functions to handle changed TDP SPTEs
kvm: x86/mmu: Allocate and free TDP MMU roots
kvm: x86/mmu: Init / Uninit the TDP MMU
kvm: x86/mmu: Introduce tdp_iter
KVM: mmu: extract spte.h and spte.c
KVM: mmu: Separate updating a PTE from kvm_set_pte_rmapp
...
- New page table code for both hypervisor and guest stage-2
- Introduction of a new EL2-private host context
- Allow EL2 to have its own private per-CPU variables
- Support of PMU event filtering
- Complete rework of the Spectre mitigation
-----BEGIN PGP SIGNATURE-----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=mjUF
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for Linux 5.10
- New page table code for both hypervisor and guest stage-2
- Introduction of a new EL2-private host context
- Allow EL2 to have its own private per-CPU variables
- Support of PMU event filtering
- Complete rework of the Spectre mitigation
- Userspace support for the Memory Tagging Extension introduced by Armv8.5.
Kernel support (via KASAN) is likely to follow in 5.11.
- Selftests for MTE, Pointer Authentication and FPSIMD/SVE context
switching.
- Fix and subsequent rewrite of our Spectre mitigations, including the
addition of support for PR_SPEC_DISABLE_NOEXEC.
- Support for the Armv8.3 Pointer Authentication enhancements.
- Support for ASID pinning, which is required when sharing page-tables with
the SMMU.
- MM updates, including treating flush_tlb_fix_spurious_fault() as a no-op.
- Perf/PMU driver updates, including addition of the ARM CMN PMU driver and
also support to handle CPU PMU IRQs as NMIs.
- Allow prefetchable PCI BARs to be exposed to userspace using normal
non-cacheable mappings.
- Implementation of ARCH_STACKWALK for unwinding.
- Improve reporting of unexpected kernel traps due to BPF JIT failure.
- Improve robustness of user-visible HWCAP strings and their corresponding
numerical constants.
- Removal of TEXT_OFFSET.
- Removal of some unused functions, parameters and prototypes.
- Removal of MPIDR-based topology detection in favour of firmware
description.
- Cleanups to handling of SVE and FPSIMD register state in preparation
for potential future optimisation of handling across syscalls.
- Cleanups to the SDEI driver in preparation for support in KVM.
- Miscellaneous cleanups and refactoring work.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAl+AUXMQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNFc1B/4q2Kabe+pPu7s1f58Q+OTaEfqcr3F1qh27
F1YpFZUYxg0GPfPsFrnbJpo5WKo7wdR9ceI9yF/GHjs7A/MSoQJis3pG6SlAd9c0
nMU5tCwhg9wfq6asJtl0/IPWem6cqqhdzC6m808DjeHuyi2CCJTt0vFWH3OeHEhG
cfmLfaSNXOXa/MjEkT8y1AXJ/8IpIpzkJeCRA1G5s18PXV9Kl5bafIo9iqyfKPLP
0rJljBmoWbzuCSMc81HmGUQI4+8KRp6HHhyZC/k0WEVgj3LiumT7am02bdjZlTnK
BeNDKQsv2Jk8pXP2SlrI3hIUTz0bM6I567FzJEokepvTUzZ+CVBi
=9J8H
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"There's quite a lot of code here, but much of it is due to the
addition of a new PMU driver as well as some arm64-specific selftests
which is an area where we've traditionally been lagging a bit.
In terms of exciting features, this includes support for the Memory
Tagging Extension which narrowly missed 5.9, hopefully allowing
userspace to run with use-after-free detection in production on CPUs
that support it. Work is ongoing to integrate the feature with KASAN
for 5.11.
Another change that I'm excited about (assuming they get the hardware
right) is preparing the ASID allocator for sharing the CPU page-table
with the SMMU. Those changes will also come in via Joerg with the
IOMMU pull.
We do stray outside of our usual directories in a few places, mostly
due to core changes required by MTE. Although much of this has been
Acked, there were a couple of places where we unfortunately didn't get
any review feedback.
Other than that, we ran into a handful of minor conflicts in -next,
but nothing that should post any issues.
Summary:
- Userspace support for the Memory Tagging Extension introduced by
Armv8.5. Kernel support (via KASAN) is likely to follow in 5.11.
- Selftests for MTE, Pointer Authentication and FPSIMD/SVE context
switching.
- Fix and subsequent rewrite of our Spectre mitigations, including
the addition of support for PR_SPEC_DISABLE_NOEXEC.
- Support for the Armv8.3 Pointer Authentication enhancements.
- Support for ASID pinning, which is required when sharing
page-tables with the SMMU.
- MM updates, including treating flush_tlb_fix_spurious_fault() as a
no-op.
- Perf/PMU driver updates, including addition of the ARM CMN PMU
driver and also support to handle CPU PMU IRQs as NMIs.
- Allow prefetchable PCI BARs to be exposed to userspace using normal
non-cacheable mappings.
- Implementation of ARCH_STACKWALK for unwinding.
- Improve reporting of unexpected kernel traps due to BPF JIT
failure.
- Improve robustness of user-visible HWCAP strings and their
corresponding numerical constants.
- Removal of TEXT_OFFSET.
- Removal of some unused functions, parameters and prototypes.
- Removal of MPIDR-based topology detection in favour of firmware
description.
- Cleanups to handling of SVE and FPSIMD register state in
preparation for potential future optimisation of handling across
syscalls.
- Cleanups to the SDEI driver in preparation for support in KVM.
- Miscellaneous cleanups and refactoring work"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (148 commits)
Revert "arm64: initialize per-cpu offsets earlier"
arm64: random: Remove no longer needed prototypes
arm64: initialize per-cpu offsets earlier
kselftest/arm64: Check mte tagged user address in kernel
kselftest/arm64: Verify KSM page merge for MTE pages
kselftest/arm64: Verify all different mmap MTE options
kselftest/arm64: Check forked child mte memory accessibility
kselftest/arm64: Verify mte tag inclusion via prctl
kselftest/arm64: Add utilities and a test to validate mte memory
perf: arm-cmn: Fix conversion specifiers for node type
perf: arm-cmn: Fix unsigned comparison to less than zero
arm64: dbm: Invalidate local TLB when setting TCR_EL1.HD
arm64: mm: Make flush_tlb_fix_spurious_fault() a no-op
arm64: Add support for PR_SPEC_DISABLE_NOEXEC prctl() option
arm64: Pull in task_stack_page() to Spectre-v4 mitigation code
KVM: arm64: Allow patching EL2 vectors even with KASLR is not enabled
arm64: Get rid of arm64_ssbd_state
KVM: arm64: Convert ARCH_WORKAROUND_2 to arm64_get_spectre_v4_state()
KVM: arm64: Get rid of kvm_arm_have_ssbd()
KVM: arm64: Simplify handling of ARCH_WORKAROUND_2
...
- Fix synchronization of VTTBR update on TLB invalidation for nVHE systems
-----BEGIN PGP SIGNATURE-----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=YFeP
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master
KVM/arm64 fixes for 5.9, take #3
- Fix synchronization of VTTBR update on TLB invalidation for nVHE systems
Add userspace support for the Memory Tagging Extension introduced by
Armv8.5.
(Catalin Marinas and others)
* for-next/mte: (30 commits)
arm64: mte: Fix typo in memory tagging ABI documentation
arm64: mte: Add Memory Tagging Extension documentation
arm64: mte: Kconfig entry
arm64: mte: Save tags when hibernating
arm64: mte: Enable swap of tagged pages
mm: Add arch hooks for saving/restoring tags
fs: Handle intra-page faults in copy_mount_options()
arm64: mte: ptrace: Add NT_ARM_TAGGED_ADDR_CTRL regset
arm64: mte: ptrace: Add PTRACE_{PEEK,POKE}MTETAGS support
arm64: mte: Allow {set,get}_tagged_addr_ctrl() on non-current tasks
arm64: mte: Restore the GCR_EL1 register after a suspend
arm64: mte: Allow user control of the generated random tags via prctl()
arm64: mte: Allow user control of the tag check mode via prctl()
mm: Allow arm64 mmap(PROT_MTE) on RAM-based files
arm64: mte: Validate the PROT_MTE request via arch_validate_flags()
mm: Introduce arch_validate_flags()
arm64: mte: Add PROT_MTE support to mmap() and mprotect()
mm: Introduce arch_calc_vm_flag_bits()
arm64: mte: Tags-aware aware memcmp_pages() implementation
arm64: Avoid unnecessary clear_user_page() indirection
...
Fix and subsequently rewrite Spectre mitigations, including the addition
of support for PR_SPEC_DISABLE_NOEXEC.
(Will Deacon and Marc Zyngier)
* for-next/ghostbusters: (22 commits)
arm64: Add support for PR_SPEC_DISABLE_NOEXEC prctl() option
arm64: Pull in task_stack_page() to Spectre-v4 mitigation code
KVM: arm64: Allow patching EL2 vectors even with KASLR is not enabled
arm64: Get rid of arm64_ssbd_state
KVM: arm64: Convert ARCH_WORKAROUND_2 to arm64_get_spectre_v4_state()
KVM: arm64: Get rid of kvm_arm_have_ssbd()
KVM: arm64: Simplify handling of ARCH_WORKAROUND_2
arm64: Rewrite Spectre-v4 mitigation code
arm64: Move SSBD prctl() handler alongside other spectre mitigation code
arm64: Rename ARM64_SSBD to ARM64_SPECTRE_V4
arm64: Treat SSBS as a non-strict system feature
arm64: Group start_thread() functions together
KVM: arm64: Set CSV2 for guests on hardware unaffected by Spectre-v2
arm64: Rewrite Spectre-v2 mitigation code
arm64: Introduce separate file for spectre mitigations and reporting
arm64: Rename ARM64_HARDEN_BRANCH_PREDICTOR to ARM64_SPECTRE_V2
KVM: arm64: Simplify install_bp_hardening_cb()
KVM: arm64: Replace CONFIG_KVM_INDIRECT_VECTORS with CONFIG_RANDOMIZE_BASE
arm64: Remove Spectre-related CONFIG_* options
arm64: Run ARCH_WORKAROUND_2 enabling code on all CPUs
...
Remove unused functions and parameters from ACPI IORT code.
(Zenghui Yu via Lorenzo Pieralisi)
* for-next/acpi:
ACPI/IORT: Remove the unused inline functions
ACPI/IORT: Drop the unused @ops of iort_add_device_replay()
Remove redundant code and fix documentation of caching behaviour for the
HVC_SOFT_RESTART hypercall.
(Pingfan Liu)
* for-next/boot:
Documentation/kvm/arm: improve description of HVC_SOFT_RESTART
arm64/relocate_kernel: remove redundant code
Improve reporting of unexpected kernel traps due to BPF JIT failure.
(Will Deacon)
* for-next/bpf:
arm64: Improve diagnostics when trapping BRK with FAULT_BRK_IMM
Improve robustness of user-visible HWCAP strings and their corresponding
numerical constants.
(Anshuman Khandual)
* for-next/cpuinfo:
arm64/cpuinfo: Define HWCAP name arrays per their actual bit definitions
Cleanups to handling of SVE and FPSIMD register state in preparation
for potential future optimisation of handling across syscalls.
(Julien Grall)
* for-next/fpsimd:
arm64/sve: Implement a helper to load SVE registers from FPSIMD state
arm64/sve: Implement a helper to flush SVE registers
arm64/fpsimdmacros: Allow the macro "for" to be used in more cases
arm64/fpsimdmacros: Introduce a macro to update ZCR_EL1.LEN
arm64/signal: Update the comment in preserve_sve_context
arm64/fpsimd: Update documentation of do_sve_acc
Miscellaneous changes.
(Tian Tao and others)
* for-next/misc:
arm64/mm: return cpu_all_mask when node is NUMA_NO_NODE
arm64: mm: Fix missing-prototypes in pageattr.c
arm64/fpsimd: Fix missing-prototypes in fpsimd.c
arm64: hibernate: Remove unused including <linux/version.h>
arm64/mm: Refactor {pgd, pud, pmd, pte}_ERROR()
arm64: Remove the unused include statements
arm64: get rid of TEXT_OFFSET
arm64: traps: Add str of description to panic() in die()
Memory management updates and cleanups.
(Anshuman Khandual and others)
* for-next/mm:
arm64: dbm: Invalidate local TLB when setting TCR_EL1.HD
arm64: mm: Make flush_tlb_fix_spurious_fault() a no-op
arm64/mm: Unify CONT_PMD_SHIFT
arm64/mm: Unify CONT_PTE_SHIFT
arm64/mm: Remove CONT_RANGE_OFFSET
arm64/mm: Enable THP migration
arm64/mm: Change THP helpers to comply with generic MM semantics
arm64/mm/ptdump: Add address markers for BPF regions
Allow prefetchable PCI BARs to be exposed to userspace using normal
non-cacheable mappings.
(Clint Sbisa)
* for-next/pci:
arm64: Enable PCI write-combine resources under sysfs
Perf/PMU driver updates.
(Julien Thierry and others)
* for-next/perf:
perf: arm-cmn: Fix conversion specifiers for node type
perf: arm-cmn: Fix unsigned comparison to less than zero
arm_pmu: arm64: Use NMIs for PMU
arm_pmu: Introduce pmu_irq_ops
KVM: arm64: pmu: Make overflow handler NMI safe
arm64: perf: Defer irq_work to IPI_IRQ_WORK
arm64: perf: Remove PMU locking
arm64: perf: Avoid PMXEV* indirection
arm64: perf: Add missing ISB in armv8pmu_enable_counter()
perf: Add Arm CMN-600 PMU driver
perf: Add Arm CMN-600 DT binding
arm64: perf: Add support caps under sysfs
drivers/perf: thunderx2_pmu: Fix memory resource error handling
drivers/perf: xgene_pmu: Fix uninitialized resource struct
perf: arm_dsu: Support DSU ACPI devices
arm64: perf: Remove unnecessary event_idx check
drivers/perf: hisi: Add missing include of linux/module.h
arm64: perf: Add general hardware LLC events for PMUv3
Support for the Armv8.3 Pointer Authentication enhancements.
(By Amit Daniel Kachhap)
* for-next/ptrauth:
arm64: kprobe: clarify the comment of steppable hint instructions
arm64: kprobe: disable probe of fault prone ptrauth instruction
arm64: cpufeature: Modify address authentication cpufeature to exact
arm64: ptrauth: Introduce Armv8.3 pointer authentication enhancements
arm64: traps: Allow force_signal_inject to pass esr error code
arm64: kprobe: add checks for ARMv8.3-PAuth combined instructions
Tonnes of cleanup to the SDEI driver.
(Gavin Shan)
* for-next/sdei:
firmware: arm_sdei: Remove _sdei_event_unregister()
firmware: arm_sdei: Remove _sdei_event_register()
firmware: arm_sdei: Introduce sdei_do_local_call()
firmware: arm_sdei: Cleanup on cross call function
firmware: arm_sdei: Remove while loop in sdei_event_unregister()
firmware: arm_sdei: Remove while loop in sdei_event_register()
firmware: arm_sdei: Remove redundant error message in sdei_probe()
firmware: arm_sdei: Remove duplicate check in sdei_get_conduit()
firmware: arm_sdei: Unregister driver on error in sdei_init()
firmware: arm_sdei: Avoid nested statements in sdei_init()
firmware: arm_sdei: Retrieve event number from event instance
firmware: arm_sdei: Common block for failing path in sdei_event_create()
firmware: arm_sdei: Remove sdei_is_err()
Selftests for Pointer Authentication and FPSIMD/SVE context-switching.
(Mark Brown and Boyan Karatotev)
* for-next/selftests:
selftests: arm64: Add build and documentation for FP tests
selftests: arm64: Add wrapper scripts for stress tests
selftests: arm64: Add utility to set SVE vector lengths
selftests: arm64: Add stress tests for FPSMID and SVE context switching
selftests: arm64: Add test for the SVE ptrace interface
selftests: arm64: Test case for enumeration of SVE vector lengths
kselftests/arm64: add PAuth tests for single threaded consistency and differently initialized keys
kselftests/arm64: add PAuth test for whether exec() changes keys
kselftests/arm64: add nop checks for PAuth tests
kselftests/arm64: add a basic Pointer Authentication test
Implementation of ARCH_STACKWALK for unwinding.
(Mark Brown)
* for-next/stacktrace:
arm64: Move console stack display code to stacktrace.c
arm64: stacktrace: Convert to ARCH_STACKWALK
arm64: stacktrace: Make stack walk callback consistent with generic code
stacktrace: Remove reliable argument from arch_stack_walk() callback
Support for ASID pinning, which is required when sharing page-tables with
the SMMU.
(Jean-Philippe Brucker)
* for-next/svm:
arm64: cpufeature: Export symbol read_sanitised_ftr_reg()
arm64: mm: Pin down ASIDs for sharing mm with devices
Rely on firmware tables for establishing CPU topology.
(Valentin Schneider)
* for-next/topology:
arm64: topology: Stop using MPIDR for topology information
Spelling fixes.
(Xiaoming Ni and Yanfei Xu)
* for-next/tpyos:
arm64/numa: Fix a typo in comment of arm64_numa_init
arm64: fix some spelling mistakes in the comments by codespell
vDSO cleanups.
(Will Deacon)
* for-next/vdso:
arm64: vdso: Fix unusual formatting in *setup_additional_pages()
arm64: vdso32: Remove a bunch of #ifdef CONFIG_COMPAT_VDSO guards
If a change in the MMU notifier sequence number forces user_mem_abort()
to return early when attempting to handle a stage-2 fault, we return
uninitialised stack to kvm_handle_guest_abort(), which could potentially
result in the injection of an external abort into the guest or a spurious
return to userspace. Neither or these are what we want to do.
Initialise 'ret' to 0 in user_mem_abort() so that bailing due to a
change in the MMU notrifier sequence number is treated as though the
fault was handled.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Cc: Gavin Shan <gshan@redhat.com>
Cc: Alexandru Elisei <alexandru.elisei@arm.com>
Link: https://lore.kernel.org/r/20200930102442.16142-1-will@kernel.org
Alex pointed out that we don't pass a level hint to the TLBI instruction
when handling a stage-2 permission fault, even though the walker does
at some point have the level information in its hands.
Rework stage2_update_leaf_attrs() so that it can optionally return the
level of the updated pte to its caller, which can in turn be used to
provide the correct TLBI level hint.
Reported-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Cc: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/595cc73e-636e-8b3a-f93a-b4e9fb218db8@arm.com
Link: https://lore.kernel.org/r/20200930131801.16889-1-will@kernel.org
Commit a0e50aa3f4 ("KVM: arm64: Factor out stage 2 page table
data from struct kvm") dropped the ISB after __load_guest_stage2(),
only leaving the one that is required when the speculative AT
workaround is in effect.
As Andrew points it: "This alternative is 'backwards' to avoid a
double ISB as there is one in __load_guest_stage2 when the workaround
is active."
Restore the missing ISB, conditionned on the AT workaround not being
active.
Fixes: a0e50aa3f4 ("KVM: arm64: Factor out stage 2 page table data from struct kvm")
Reported-by: Andrew Scull <ascull@google.com>
Reported-by: Thomas Tai <thomas.tai@oracle.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
With all nVHE per-CPU variables being part of the hyp per-CPU region,
mapping them individual is not necessary any longer. They are mapped to hyp
as part of the overall per-CPU region.
Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Andrew Scull <ascull@google.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200922204910.7265-11-dbrazdil@google.com
Add hyp percpu section to linker script and rename the corresponding ELF
sections of hyp/nvhe object files. This moves all nVHE-specific percpu
variables to the new hyp percpu section.
Allocate sufficient amount of memory for all percpu hyp regions at global KVM
init time and create corresponding hyp mappings.
The base addresses of hyp percpu regions are kept in a dynamically allocated
array in the kernel.
Add NULL checks in PMU event-reset code as it may run before KVM memory is
initialized.
Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200922204910.7265-10-dbrazdil@google.com
Host CPU context is stored in a global per-cpu variable `kvm_host_data`.
In preparation for introducing independent per-CPU region for nVHE hyp,
create two separate instances of `kvm_host_data`, one for VHE and one
for nVHE.
Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200922204910.7265-9-dbrazdil@google.com
Hyp keeps track of which cores require SSBD callback by accessing a
kernel-proper global variable. Create an nVHE symbol of the same name
and copy the value from kernel proper to nVHE as KVM is being enabled
on a core.
Done in preparation for separating percpu memory owned by kernel
proper and nVHE.
Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200922204910.7265-8-dbrazdil@google.com
The hyp_adr/ldr_this_cpu helpers were introduced for use in hyp code
because they always needed to use TPIDR_EL2 for base, while
adr/ldr_this_cpu from kernel proper would select between TPIDR_EL2 and
_EL1 based on VHE/nVHE.
Simplify this now that the hyp mode case can be handled using the
__KVM_VHE/NVHE_HYPERVISOR__ macros.
Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Andrew Scull <ascull@google.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200922204910.7265-6-dbrazdil@google.com
this_cpu_ptr is meant for use in kernel proper because it selects between
TPIDR_EL1/2 based on nVHE/VHE. __hyp_this_cpu_ptr was used in hyp to always
select TPIDR_EL2. Unify all users behind this_cpu_ptr and friends by
selecting _EL2 register under __KVM_NVHE_HYPERVISOR__. VHE continues
selecting the register using alternatives.
Under CONFIG_DEBUG_PREEMPT, the kernel helpers perform a preemption check
which is omitted by the hyp helpers. Preserve the behavior for nVHE by
overriding the corresponding macros under __KVM_NVHE_HYPERVISOR__. Extend
the checks into VHE hyp code.
Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Andrew Scull <ascull@google.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200922204910.7265-5-dbrazdil@google.com
Relying on objcopy to prefix the ELF section names of the nVHE hyp code
is brittle and prevents us from using wildcards to match specific
section names.
Improve the build rules by partially linking all '.nvhe.o' files and
prefixing their ELF section names using a linker script. Continue using
objcopy for prefixing ELF symbol names.
One immediate advantage of this approach is that all subsections
matching a pattern can be merged into a single prefixed section, eg.
.text and .text.* can be linked into a single '.hyp.text'. This removes
the need for -fno-reorder-functions on GCC and will be useful in the
future too: LTO builds use .text subsections, compilers routinely
generate .rodata subsections, etc.
Partially linking all hyp code into a single object file also makes it
easier to analyze.
Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200922204910.7265-2-dbrazdil@google.com
Patching the EL2 exception vectors is integral to the Spectre-v2
workaround, where it can be necessary to execute CPU-specific sequences
to nobble the branch predictor before running the hypervisor text proper.
Remove the dependency on CONFIG_RANDOMIZE_BASE and allow the EL2 vectors
to be patched even when KASLR is not enabled.
Fixes: 7a132017e7a5 ("KVM: arm64: Replace CONFIG_KVM_INDIRECT_VECTORS with CONFIG_RANDOMIZE_BASE")
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/202009221053.Jv1XsQUZ%lkp@intel.com
Signed-off-by: Will Deacon <will@kernel.org>
Convert the KVM WA2 code to using the Spectre infrastructure,
making the code much more readable. It also allows us to
take SSBS into account for the mitigation.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Owing to the fact that the host kernel is always mitigated, we can
drastically simplify the WA2 handling by keeping the mitigation
state ON when entering the guest. This means the guest is either
unaffected or not mitigated.
This results in a nice simplification of the mitigation space,
and the removal of a lot of code that was never really used anyway.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
In a similar manner to the renaming of ARM64_HARDEN_BRANCH_PREDICTOR
to ARM64_SPECTRE_V2, rename ARM64_SSBD to ARM64_SPECTRE_V4. This isn't
_entirely_ accurate, as we also need to take into account the interaction
with SSBS, but that will be taken care of in subsequent patches.
Signed-off-by: Will Deacon <will@kernel.org>
If the system is not affected by Spectre-v2, then advertise to the KVM
guest that it is not affected, without the need for a safelist in the
guest.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
The Spectre-v2 mitigation code is pretty unwieldy and hard to maintain.
This is largely due to it being written hastily, without much clue as to
how things would pan out, and also because it ends up mixing policy and
state in such a way that it is very difficult to figure out what's going
on.
Rewrite the Spectre-v2 mitigation so that it clearly separates state from
policy and follows a more structured approach to handling the mitigation.
Signed-off-by: Will Deacon <will@kernel.org>
The removal of CONFIG_HARDEN_BRANCH_PREDICTOR means that
CONFIG_KVM_INDIRECT_VECTORS is synonymous with CONFIG_RANDOMIZE_BASE,
so replace it.
Signed-off-by: Will Deacon <will@kernel.org>
The spectre mitigations are too configurable for their own good, leading
to confusing logic trying to figure out when we should mitigate and when
we shouldn't. Although the plethora of command-line options need to stick
around for backwards compatibility, the default-on CONFIG options that
depend on EXPERT can be dropped, as the mitigations only do anything if
the system is vulnerable, a mitigation is available and the command-line
hasn't disabled it.
Remove CONFIG_HARDEN_BRANCH_PREDICTOR and CONFIG_ARM64_SSBD in favour of
enabling this code unconditionally.
Signed-off-by: Will Deacon <will@kernel.org>
As we can now hide events from the guest, let's also adjust its view of
PCMEID{0,1}_EL1 so that it can figure out why some common events are not
counting as they should.
The astute user can still look into the TRM for their CPU and find out
they've been cheated, though. Nobody's perfect.
Signed-off-by: Marc Zyngier <maz@kernel.org>
It can be desirable to expose a PMU to a guest, and yet not want the
guest to be able to count some of the implemented events (because this
would give information on shared resources, for example.
For this, let's extend the PMUv3 device API, and offer a way to setup a
bitmap of the allowed events (the default being no bitmap, and thus no
filtering).
Userspace can thus allow/deny ranges of event. The default policy
depends on the "polarity" of the first filter setup (default deny if the
filter allows events, and default allow if the filter denies events).
This allows to setup exactly what is allowed for a given guest.
Note that although the ioctl is per-vcpu, the map of allowed events is
global to the VM (it can be setup from any vcpu until the vcpu PMU is
initialized).
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
The PMU code suffers from a small defect where we assume that the event
number provided by the guest is always 16 bit wide, even if the CPU only
implements the ARMv8.0 architecture. This isn't really problematic in
the sense that the event number ends up in a system register, cropping
it to the right width, but still this needs fixing.
In order to make it work, let's probe the version of the PMU that the
guest is going to use. This is done by temporarily creating a kernel
event and looking at the PMUVer field that has been saved at probe time
in the associated arm_pmu structure. This in turn gets saved in the kvm
structure, and subsequently used to compute the event mask that gets
used throughout the PMU code.
Signed-off-by: Marc Zyngier <maz@kernel.org>
The PMU emulation error handling is pretty messy when dealing with
attributes. Let's refactor it so that we have less duplication,
and that it is easy to extend later on.
A functional change is that kvm_arm_pmu_v3_init() used to return
-ENXIO when the PMU feature wasn't set. The error is now reported
as -ENODEV, matching the documentation. -ENXIO is still returned
when the interrupt isn't properly configured.
Signed-off-by: Marc Zyngier <maz@kernel.org>
kvm_vcpu_kick() is not NMI safe. When the overflow handler is called from
NMI context, defer waking the vcpu to an irq_work queue.
A vcpu can be freed while it's not running by kvm_destroy_vm(). Prevent
running the irq_work for a non-existent vcpu by calling irq_work_sync() on
the PMU destroy path.
[Alexandru E.: Added irq_work_sync()]
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Tested-by: Sumit Garg <sumit.garg@linaro.org> (Developerbox)
Cc: Julien Thierry <julien.thierry.kdev@gmail.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Suzuki K Pouloze <suzuki.poulose@arm.com>
Cc: kvm@vger.kernel.org
Cc: kvmarm@lists.cs.columbia.edu
Link: https://lore.kernel.org/r/20200924110706.254996-6-alexandru.elisei@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
- fix fault on page table writes during instruction fetch
s390:
- doc improvement
x86:
- The obvious patches are always the ones that turn out to be
completely broken. /me hangs his head in shame.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl9nyjsUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNpcAf/bsW1B+Q8QJnyfU4RSiX28lG8Ki9F
9A0aVJPW4U/x7COZuhldrQGkbHDA5agavCevghMuOqWkz2gs6ihpAGgzfG+FVIm7
2yi4k9A90kPrMSBf8qaLgvybGNO6uxGpJmv54MjHpkLPUEz+J1MuB9D6eEqBZkWz
ncOSsGS2eeUFpqulA9DCN3O3PbaFeAXPNJnDNGqxrGjV7CriosRlbK02PVxTQzvT
nuGzDgaOmmRXntIQ7hrk9DJlHm7gH2jH8TK9gB2xm0yuVm2/nNlpkY6rP6NDUdLs
OrJOzxWOcSO8HRgBhlFhED/8heTqHCJS1vMUI3M6Z62p324TjRDjRC+4ow==
=tpZU
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- fix fault on page table writes during instruction fetch
s390:
- doc improvement
x86:
- The obvious patches are always the ones that turn out to be
completely broken. /me hangs his head in shame"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
Revert "KVM: Check the allocation of pv cpu mask"
KVM: arm64: Remove S1PTW check from kvm_vcpu_dabt_iswrite()
KVM: arm64: Assume write fault on S1PTW permission fault on instruction fetch
docs: kvm: add documentation for KVM_CAP_S390_DIAG318
KVM currently assumes that an instruction abort can never be a write.
This is in general true, except when the abort is triggered by
a S1PTW on instruction fetch that tries to update the S1 page tables
(to set AF, for example).
This can happen if the page tables have been paged out and brought
back in without seeing a direct write to them (they are thus marked
read only), and the fault handling code will make the PT executable(!)
instead of writable. The guest gets stuck forever.
In these conditions, the permission fault must be considered as
a write so that the Stage-1 update can take place. This is essentially
the I-side equivalent of the problem fixed by 60e21a0ef5 ("arm64: KVM:
Take S1 walks into account when determining S2 write faults").
Update kvm_is_write_fault() to return true on IABT+S1PTW, and introduce
kvm_vcpu_trap_is_exec_fault() that only return true when no faulting
on a S1 fault. Additionally, kvm_vcpu_dabt_iss1tw() is renamed to
kvm_vcpu_abt_iss1tw(), as the above makes it plain that it isn't
specific to data abort.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Will Deacon <will@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200915104218.1284701-2-maz@kernel.org
Fix following warnings caused by mismatch bewteen function parameters
and comments.
arch/arm64/kvm/mmu.c:128: warning: Function parameter or member 'mmu' not described in '__unmap_stage2_range'
arch/arm64/kvm/mmu.c:128: warning: Function parameter or member 'may_block' not described in '__unmap_stage2_range'
arch/arm64/kvm/mmu.c:128: warning: Excess function parameter 'kvm' description in '__unmap_stage2_range'
arch/arm64/kvm/mmu.c:499: warning: Function parameter or member 'writable' not described in 'kvm_phys_addr_ioremap'
arch/arm64/kvm/mmu.c:538: warning: Function parameter or member 'mmu' not described in 'stage2_wp_range'
arch/arm64/kvm/mmu.c:538: warning: Excess function parameter 'kvm' description in 'stage2_wp_range'
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/1600307269-50957-1-git-send-email-tanxiaofei@huawei.com
As a result of a KVM_SET_USER_MEMORY_REGION ioctl, KVM flushes the
dcache for the memslot being changed to ensure a consistent view of memory
between the host and the guest: the host runs with caches enabled, and
it is possible for the data written by the hypervisor to still be in the
caches, but the guest is running with stage 1 disabled, meaning data
accesses are to Device-nGnRnE memory, bypassing the caches entirely.
Flushing the dcache is not necessary when KVM enables FWB, because it
forces the guest to uses cacheable memory accesses.
The current behaviour does not change, as the dcache flush helpers execute
the cache operation only if FWB is not enabled, but walking the stage 2
table is avoided.
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200915170442.131635-1-alexandru.elisei@arm.com
Fix kernel-doc warnings.
arch/arm64/kvm/inject_fault.c:210: warning: Function parameter or member
'vcpu' not described in 'kvm_inject_undefined'
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/1600154512-44624-1-git-send-email-tiantao6@hisilicon.com
When userspace uses hugetlbfs for the VM memory, user_mem_abort() tries to
use the same block size to map the faulting IPA in stage 2. If stage 2
cannot the same block mapping because the block size doesn't fit in the
memslot or the memslot is not properly aligned, user_mem_abort() will fall
back to a page mapping, regardless of the block size. We can do better for
PUD backed hugetlbfs by checking if a PMD block mapping is supported before
deciding to use a page.
vma_pagesize is an unsigned long, use 1UL instead of 1ULL when assigning
its value.
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200910133351.118191-1-alexandru.elisei@arm.com
The host need not concern itself with the pointer differences for the
hyp interfaces that are shared between VHE and nVHE so leave it to the
hyp to handle.
As the SMCCC function IDs are converted into function calls, it is a
suitable place to also convert any pointer arguments into hyp pointers.
This, additionally, eases the reuse of the handlers in different
contexts.
Signed-off-by: Andrew Scull <ascull@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200915104643.2543892-20-ascull@google.com
To complete the transition to SMCCC, the hyp initialization is given a
function ID. This looks neater than comparing the hyp stub function IDs
to the page table physical address.
Some care is taken to only clobber x0-3 before the host context is saved
as only those registers can be clobbered accoring to SMCCC. Fortunately,
only a few acrobatics are needed. The possible new tpidr_el2 is moved to
the argument in x2 so that it can be stashed in tpidr_el2 early to free
up a scratch register. The page table configuration then makes use of
x0-2.
Signed-off-by: Andrew Scull <ascull@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200915104643.2543892-19-ascull@google.com
