When myrb_probe() fails the callback might not be set, so we need to
validate the 'disable_intr' callback in myrb_cleanup() to not cause a null
pointer exception. And while at it do not call myrb_cleanup() if we cannot
enable the PCI device at all.
Link: https://lore.kernel.org/r/20220523120244.99515-1-hare@suse.de
Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Tested-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The driver doesn't express DMA addressing limitation under 32-bits anywhere
else, so remove the spurious GFP_DMA allocation.
Link: https://lore.kernel.org/r/20211222091801.924745-1-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
struct device supports attribute groups directly but does not support
struct device_attribute directly. Hence switch to attribute groups.
Link: https://lore.kernel.org/r/20211012233558.4066756-32-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Prepare for removal of the request pointer by using scsi_cmd_to_rq()
instead. This patch does not change any functionality.
Link: https://lore.kernel.org/r/20210809230355.8186-33-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Introduce scsi_build_sense() as a wrapper around scsi_build_sense_buffer()
to format the buffer and set the correct SCSI status.
Link: https://lore.kernel.org/r/20210427083046.31620-8-hare@suse.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This was detected by building the kernel with clang and W=1.
Link: https://lore.kernel.org/r/20210415220826.29438-11-bvanassche@acm.org
Cc: Hannes Reinecke <hare@kernel.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes the following W=1 kernel build warning(s):
drivers/scsi/myrb.c:91: warning: Function parameter or member 'pdev' not described in 'myrb_create_mempools'
drivers/scsi/myrb.c:91: warning: Function parameter or member 'cb' not described in 'myrb_create_mempools'
drivers/scsi/myrb.c:141: warning: Function parameter or member 'cb' not described in 'myrb_destroy_mempools'
drivers/scsi/myrb.c:153: warning: Function parameter or member 'cmd_blk' not described in 'myrb_reset_cmd'
drivers/scsi/myrb.c:164: warning: Function parameter or member 'cb' not described in 'myrb_qcmd'
drivers/scsi/myrb.c:164: warning: Function parameter or member 'cmd_blk' not described in 'myrb_qcmd'
drivers/scsi/myrb.c:187: warning: Function parameter or member 'cb' not described in 'myrb_exec_cmd'
drivers/scsi/myrb.c:187: warning: Function parameter or member 'cmd_blk' not described in 'myrb_exec_cmd'
drivers/scsi/myrb.c:208: warning: Function parameter or member 'cb' not described in 'myrb_exec_type3'
drivers/scsi/myrb.c:208: warning: Function parameter or member 'op' not described in 'myrb_exec_type3'
drivers/scsi/myrb.c:208: warning: Function parameter or member 'addr' not described in 'myrb_exec_type3'
drivers/scsi/myrb.c:231: warning: Function parameter or member 'cb' not described in 'myrb_exec_type3D'
drivers/scsi/myrb.c:231: warning: Function parameter or member 'op' not described in 'myrb_exec_type3D'
drivers/scsi/myrb.c:231: warning: Function parameter or member 'sdev' not described in 'myrb_exec_type3D'
drivers/scsi/myrb.c:231: warning: Function parameter or member 'pdev_info' not described in 'myrb_exec_type3D'
drivers/scsi/myrb.c:341: warning: Function parameter or member 'cb' not described in 'myrb_get_errtable'
drivers/scsi/myrb.c:388: warning: Function parameter or member 'cb' not described in 'myrb_get_ldev_info'
drivers/scsi/myrb.c:440: warning: Function parameter or member 'cb' not described in 'myrb_get_rbld_progress'
drivers/scsi/myrb.c:440: warning: Function parameter or member 'rbld' not described in 'myrb_get_rbld_progress'
drivers/scsi/myrb.c:472: warning: Function parameter or member 'cb' not described in 'myrb_update_rbld_progress'
drivers/scsi/myrb.c:533: warning: Function parameter or member 'cb' not described in 'myrb_get_cc_progress'
drivers/scsi/myrb.c:580: warning: Function parameter or member 'cb' not described in 'myrb_bgi_control'
drivers/scsi/myrb.c:671: warning: Function parameter or member 'cb' not described in 'myrb_hba_enquiry'
drivers/scsi/myrb.c:782: warning: Function parameter or member 'cb' not described in 'myrb_set_pdev_state'
drivers/scsi/myrb.c:782: warning: Function parameter or member 'sdev' not described in 'myrb_set_pdev_state'
drivers/scsi/myrb.c:782: warning: Function parameter or member 'state' not described in 'myrb_set_pdev_state'
drivers/scsi/myrb.c:808: warning: Function parameter or member 'cb' not described in 'myrb_enable_mmio'
drivers/scsi/myrb.c:808: warning: Function parameter or member 'mmio_init_fn' not described in 'myrb_enable_mmio'
drivers/scsi/myrb.c:913: warning: Function parameter or member 'cb' not described in 'myrb_get_hba_config'
drivers/scsi/myrb.c:1200: warning: Function parameter or member 'cb' not described in 'myrb_unmap'
drivers/scsi/myrb.c:1236: warning: Function parameter or member 'cb' not described in 'myrb_cleanup'
drivers/scsi/myrb.c:2249: warning: Function parameter or member 'dev' not described in 'myrb_is_raid'
drivers/scsi/myrb.c:2260: warning: Function parameter or member 'dev' not described in 'myrb_get_resync'
drivers/scsi/myrb.c:2287: warning: Function parameter or member 'dev' not described in 'myrb_get_state'
drivers/scsi/myrb.c:2493: warning: Function parameter or member 'cb' not described in 'myrb_err_status'
drivers/scsi/myrb.c:2493: warning: Function parameter or member 'error' not described in 'myrb_err_status'
drivers/scsi/myrb.c:2493: warning: Function parameter or member 'parm0' not described in 'myrb_err_status'
drivers/scsi/myrb.c:2493: warning: Function parameter or member 'parm1' not described in 'myrb_err_status'
Link: https://lore.kernel.org/r/20210317091230.2912389-2-lee.jones@linaro.org
Cc: Hannes Reinecke <hare@kernel.org>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Linux GmbH <hare@suse.com>
Cc: "Leonard N. Zubkoff" <lnz@dandelion.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The in_interrupt() macro is ill-defined and does not provide what the name
suggests. The usage especially in driver code is deprecated and a tree-wide
effort to clean up and consolidate the (ab)usage of in_interrupt() and
related checks is happening.
In this case the check covers only parts of the contexts in which these
functions cannot be called. It fails to detect preemption or interrupt
disabled invocations.
As wait_for_completion() already contains a broad variety of checks (always
enabled or debug option dependent) which cover all invalid conditions
already, there is no point in having extra inconsistent warnings in
drivers.
Just remove it.
Link: https://lore.kernel.org/r/20201126132952.2287996-11-bigeasy@linutronix.de
Cc: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The set of core changes here is Christoph's submission path cleanups.
These introduced a couple of regressions when first proposed so they
got held over from the initial merge window pull request to give more
testing time, which they've now had and Syzbot has confirmed the
regression it detected is fixed. The other main changes are two
driver updates (arcmsr, pm80xx) and assorted minor clean ups.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCX5MkQCYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishRkuAPsEAR/W
NS7J7j66rF2x15xGR2CNB4R6FEBSd/hdOPp7cQEA4rtLKKI53W4oydKsfTux6N6o
MLZJIHM5nTitk++AVQs=
=QgpC
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"The set of core changes here is Christoph's submission path cleanups.
These introduced a couple of regressions when first proposed so they
got held over from the initial merge window pull request to give more
testing time, which they've now had and Syzbot has confirmed the
regression it detected is fixed.
The other main changes are two driver updates (arcmsr, pm80xx) and
assorted minor clean ups"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (38 commits)
scsi: qla2xxx: Fix return of uninitialized value in rval
scsi: core: Set sc_data_direction to DMA_NONE for no-transfer commands
scsi: sr: Initialize ->cmd_len
scsi: arcmsr: Update driver version to v1.50.00.02-20200819
scsi: arcmsr: Add support for ARC-1886 series RAID controllers
scsi: arcmsr: Fix device hot-plug monitoring timer stop
scsi: arcmsr: Remove unnecessary syntax
scsi: pm80xx: Driver version update
scsi: pm80xx: Increase the number of outstanding I/O supported to 1024
scsi: pm80xx: Remove DMA memory allocation for ccb and device structures
scsi: pm80xx: Increase number of supported queues
scsi: sym53c8xx_2: Fix sizeof() mismatch
scsi: isci: Fix a typo in a comment
scsi: qla4xxx: Fix inconsistent format argument type
scsi: myrb: Fix inconsistent format argument types
scsi: myrb: Remove redundant assignment to variable timeout
scsi: bfa: Fix error return in bfad_pci_init()
scsi: fcoe: Simplify the return expression of fcoe_sysfs_setup()
scsi: snic: Simplify the return expression of svnic_cq_alloc()
scsi: fnic: Simplify the return expression of vnic_wq_copy_alloc()
...
This series consists of the usual driver updates (ufs, qla2xxx, tcmu,
ibmvfc, lpfc, smartpqi, hisi_sas, qedi, qedf, mpt3sas) and minor bug
fixes. There are only three core changes: adding sense codes,
cleaning up noretry and adding an option for limitless retries.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCX4YulyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishaZDAQCT7rwG
UEZYHgYkU9EX9ERVBQM0SW4mLrxf3g3P5ioJsAEAtkclCM4QsIOP+MIPjIa0EyUY
khu0kcrmeFR2YwA8zhw=
=4w4S
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"The usual driver updates (ufs, qla2xxx, tcmu, ibmvfc, lpfc, smartpqi,
hisi_sas, qedi, qedf, mpt3sas) and minor bug fixes.
There are only three core changes: adding sense codes, cleaning up
noretry and adding an option for limitless retries"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (226 commits)
scsi: hisi_sas: Recover PHY state according to the status before reset
scsi: hisi_sas: Filter out new PHY up events during suspend
scsi: hisi_sas: Add device link between SCSI devices and hisi_hba
scsi: hisi_sas: Add check for methods _PS0 and _PR0
scsi: hisi_sas: Add controller runtime PM support for v3 hw
scsi: hisi_sas: Switch to new framework to support suspend and resume
scsi: hisi_sas: Use hisi_hba->cq_nvecs for calling calling synchronize_irq()
scsi: qedf: Remove redundant assignment to variable 'rc'
scsi: lpfc: Remove unneeded variable 'status' in lpfc_fcp_cpu_map_store()
scsi: snic: Convert to use DEFINE_SEQ_ATTRIBUTE macro
scsi: qla4xxx: Delete unneeded variable 'status' in qla4xxx_process_ddb_changed
scsi: sun_esp: Use module_platform_driver to simplify the code
scsi: sun3x_esp: Use module_platform_driver to simplify the code
scsi: sni_53c710: Use module_platform_driver to simplify the code
scsi: qlogicpti: Use module_platform_driver to simplify the code
scsi: mac_esp: Use module_platform_driver to simplify the code
scsi: jazz_esp: Use module_platform_driver to simplify the code
scsi: mvumi: Fix error return in mvumi_io_attach()
scsi: lpfc: Drop nodelist reference on error in lpfc_gen_req()
scsi: be2iscsi: Fix a theoretical leak in beiscsi_create_eqs()
...
Fix the following warnings:
[drivers/scsi/myrb.c:1052]: (warning) %d in format string (no. 1)
requires 'int' but the argument type is 'unsigned int'.
[drivers/scsi/myrb.c:1052]: (warning) %d in format string (no. 2)
requires 'int' but the argument type is 'unsigned int'.
[drivers/scsi/myrb.c:1052]: (warning) %d in format string (no. 4)
requires 'int' but the argument type is 'unsigned int'.
[drivers/scsi/myrb.c:2170]: (warning) %d in format string (no. 1)
requires 'int' but the argument type is 'unsigned int'.
Link: https://lore.kernel.org/r/20200930021637.2831618-1-yebin10@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The variable timeout has been initialized with a value '0'. The assignment
before while loop is redundant. Remove it.
Link: https://lore.kernel.org/r/20200929022458.40652-1-jingxiangfeng@huawei.com
Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This addresses the following sparse warning:
drivers/scsi/myrb.c:2229:27: warning: symbol 'myrb_template' was not
declared. Should it be static?
drivers/scsi/myrb.c:2318:31: warning: symbol 'myrb_raid_functions' was
not declared. Should it be static?
drivers/scsi/myrb.c:2492:6: warning: symbol 'myrb_err_status' was not
declared. Should it be static?
Link: https://lore.kernel.org/r/20200915084018.2826922-1-yanaijie@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
ioremap has provided non-cached semantics by default since the Linux 2.6
days, so remove the additional ioremap_nocache interface.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
This is mostly update of the usual drivers: smarpqi, lpfc, qedi,
megaraid_sas, libsas, zfcp, mpt3sas, hisi_sas. Additionally, we have
a pile of annotation, unused variable and minor updates. The big API
change is the updates for Christoph's DMA rework which include
removing the DISABLE_CLUSTERING flag. And finally there are a couple
of target tree updates.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXCEUNiYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishdjKAP9vrTTv
qFaYmAoRSbPq9ZiixaXLMy0K/6o76Uay0gnBqgD/fgn3jg/KQ6alNaCjmfeV3wAj
u1j3H7tha9j1it+4pUw=
=GDa+
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This is mostly update of the usual drivers: smarpqi, lpfc, qedi,
megaraid_sas, libsas, zfcp, mpt3sas, hisi_sas.
Additionally, we have a pile of annotation, unused variable and minor
updates.
The big API change is the updates for Christoph's DMA rework which
include removing the DISABLE_CLUSTERING flag.
And finally there are a couple of target tree updates"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (259 commits)
scsi: isci: request: mark expected switch fall-through
scsi: isci: remote_node_context: mark expected switch fall-throughs
scsi: isci: remote_device: Mark expected switch fall-throughs
scsi: isci: phy: Mark expected switch fall-through
scsi: iscsi: Capture iscsi debug messages using tracepoints
scsi: myrb: Mark expected switch fall-throughs
scsi: megaraid: fix out-of-bound array accesses
scsi: mpt3sas: mpt3sas_scsih: Mark expected switch fall-through
scsi: fcoe: remove set but not used variable 'port'
scsi: smartpqi: call pqi_free_interrupts() in pqi_shutdown()
scsi: smartpqi: fix build warnings
scsi: smartpqi: update driver version
scsi: smartpqi: add ofa support
scsi: smartpqi: increase fw status register read timeout
scsi: smartpqi: bump driver version
scsi: smartpqi: add smp_utils support
scsi: smartpqi: correct lun reset issues
scsi: smartpqi: correct volume status
scsi: smartpqi: do not offline disks for transient did no connect conditions
scsi: smartpqi: allow for larger raid maps
...
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where
we are expecting to fall through.
Addresses-Coverity-ID: 1465234 ("Missing break in switch")
Addresses-Coverity-ID: 1465238 ("Missing break in switch")
Addresses-Coverity-ID: 1465242 ("Missing break in switch")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The old DAC960 driver was fine with merging over segment boundaries, so
this new driver should be too.
[mkp: typos]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The same effects can be achieved by setting the dma_boundary to
PAGE_SIZE - 1 and the max_segment_size to PAGE_SIZE, so shift those
settings into the drivers. Note that in many cases the setting might
be bogus, but this keeps the status quo.
[mkp: fix myrs and myrb]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
A few drivers were not setting the use_clustering flag at all and thus
default to disable. Fix them up to explicitly set this field in
preparation for additional cleanups.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
gcc warns that the 12 byte fw_version field might not be long enough to
contain the generated firmware name string:
drivers/scsi/myrb.c: In function 'myrb_get_hba_config':
drivers/scsi/myrb.c:1052:38: error: '%02d' directive writing between 2 and 3 bytes into a region of size between 2 and 5 [-Werror=format-overflow=]
sprintf(cb->fw_version, "%d.%02d-%c-%02d",
^~~~
drivers/scsi/myrb.c:1052:26: note: directive argument in the range [0, 255]
sprintf(cb->fw_version, "%d.%02d-%c-%02d",
^~~~~~~~~~~~~~~~~
drivers/scsi/myrb.c:1052:2: note: 'sprintf' output between 10 and 14 bytes into a destination of size 12
sprintf(cb->fw_version, "%d.%02d-%c-%02d",
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
enquiry2->fw.major_version,
~~~~~~~~~~~~~~~~~~~~~~~~~~~
enquiry2->fw.minor_version,
~~~~~~~~~~~~~~~~~~~~~~~~~~~
enquiry2->fw.firmware_type,
~~~~~~~~~~~~~~~~~~~~~~~~~~~
enquiry2->fw.turn_id);
~~~~~~~~~~~~~~~~~~~~~
I have not checked whether there are appropriate range checks before the
sprintf, but there is a range check after it that will bail out in case
of out of range version numbers. This means we can simply use snprintf()
instead of sprintf() to limit the output buffer size, and it will work
correctly.
Fixes: 081ff398c5 ("scsi: myrb: Add Mylex RAID controller (block interface)")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch adds support for the Mylex DAC960 RAID controller,
supporting the older, block-based interface only. The driver is a
re-implementation of the original DAC960 driver.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
