Introduce a ti_sci_pm_domains driver to act as a generic pm domain
provider to allow each device to attach and associate it's ti-sci-id so
that it can be controlled through the TI SCI protocol.
This driver implements a simple genpd where each device node has a
phandle to the power domain node and also must provide an index which
represents the ID to be passed with TI SCI representing the device using
a single phandle cell. The driver manually parses the phandle to get the
cell value. Through this interface the genpd dev_ops start and stop
hooks will use TI SCI to turn on and off each device as determined by
pm_runtime usage.
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
The Keystone 2 family of SoCs will use various Reset Controller
drivers for managing the resets of remote processor devices like
DSPs on the SoC, so select the ARCH_HAS_RESET_CONTROLLER option
by default to enable the Reset framework.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
PCI_DOMAINS config should be selected for any SoCs
having more than a single PCIe controller. Without PCI_DOMAINS
config, only one PCIe controller gets registered.
Select PCI_DOMAINS in ARCH_MULTIPLATFORM if PCI is selected, since
it doesn't harm even if a platform has a single PCIe port.
Also remove PCI_DOMAINS being selected from other platform
specific configs.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
*MIGHT_HAVE_PCI* config is already selected in ARCH_MULTIPLATFORM.
Don't select it redundantly in all ARCH_MULTIPLATFORM based machines.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Defconfig additions, removals, etc. Most of these are small changes adding
the options for newly upstreamed drivers, or drivers needed for new board
support.
- Removed Broadcom bcm_defconfig, targets are all covered in multi_v7_defconfig
- New defconfig: multi_v4t_defconfig
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=jRHp
-----END PGP SIGNATURE-----
Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC defconfig updates from Olof Johansson:
"Defconfig additions, removals, etc.
Most of these are small changes adding the options for newly
upstreamed drivers, or drivers needed for new board support.
- removed Broadcom bcm_defconfig, targets are all covered in
multi_v7_defconfig
- new defconfig: multi_v4t_defconfig"
* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (43 commits)
ARM: multi_v7_defconfig: enable STMicroelectronics DRM Support
ARM: multi_v7_defconfig: enable STMicroelectronics BDISP 2D blitter driver
ARM: omap2plus_defconfig: Fix USB selection to keep Ethernet working
ARM: configs: lpc18xx: enable adc and dac iio drivers
ARM: config: Add a multi_v4t_defconfig
ARM: multi_v7_defconfig: add ACT8945A
ARM: at91/defconfig: Add ACT8945A driver
ARM: imx_v6_v7_defconfig: Select ADS7846 support
ARM: configs: qualcomm: Add MDM9615 missing defconfigs
ARM: multi_v7_defconfig: Enable vivid driver as a module
ARM: exynos_defconfig: Enable vivid driver as a module
ARM: defconfig: enable the MSM8660 pin controller
ARM: imx_v6_v7_defconfig: enable USB FFS gadget
ARM: socfpga: enable PL330 DMA in socfpga_defconfig
ARM: socfpga: add PCIe to socfpga_defconfig
ARM: multi_v7_defconfig: defconfig: Enable r8a7792 SoC
ARM: shmobile: defconfig: Enable r8a7792 SoC
ARM: Remove bcm_defconfig
ARM: multi_v7_defconfig: Enable Broadcom Kona watchdog
ARM: multi_v7_defconfig: Enable Broadcom STB PWM
...
Change the Kconfig option logic to fullfil with the current approach.
A new Kconfig option is added, CONFIG_KEYSTONE_TIMER and is selected by the
platform. Then the clocksource's Kconfig is changed to make this option
selectable by the user if the COMPILE_TEST option is set. Otherwise, it is
up to the platform's Kconfig to select the timer.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Some Keystone 2 devices utilize pinmuxing which requires PINCTRL
to be enabled. Therefore, enable PINCTRL for all Keystone 2 devices.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
Now that Keystone PCI controller is merged, add pcie related options
by default for keystone architecture so that driver can be enabled in
the build.
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
The dynamic relocation that the keystone platform performs
only works if we can pick the phys offset at boot time. It's
possible that there is another solution for this, but this
is the easiest workaround. Kernels with ARM_PATCH_PHYS_VIRT
are not portable across platforms, and I see no reason why
anyone would run a kernel without ARM_PATCH_PHYS_VIRT on
keystone.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
All V7 platforms can run SMP kernels, so make CONFIG_SMP visible for V7
multi-platform builds.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Multi-platform requires various kconfig options to be selected, so
platforms don't need to select them individually.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Russell King <linux@arm.linux.org.uk>
Acked-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Stephen Warren <swarren@wwwdotorg.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Drop automatic selection of TI_EDMA from Keystone Kconfig file,
as it produces build warning in case if CONFIG_DMADEVICES is not set:
warning: (ARCH_KEYSTONE) selects TI_EDMA which has unmet direct dependencies (DMADEVICES && (ARCH_DAVINCI || ARCH_OMAP || ARCH_KEYSTONE))
Instead enable TI EDMA support from defconfig.
Reported-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Keystone II peripheral devices support 32-bit DMA and hence can access only
first 2GB of the memory address space. So set the platform dma_zone_size
to handle that case.
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Keystone code is big endian compatible,
so mark it as one that supports big endian.
Note this patch just allows to select Big endian build
for ARCH_KEYSTONE, but it does not enable BE by default.
Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Select the TI EDMA to be able to enable SPI driver on Keystone
SOCs. Keystone SOCs share the EDMA IP with other TI SOCs.
Note that EDMA support hasn't been added and tested yet for
Keystone SOC data(device tree), but building it, is harmless since
driver like SPI already takes care of supporting non-dma mode
in the absence of such data.
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
The Kconfig symbol HAVE_SCHED_CLOCK got removed in v3.4,
with commit 6905a65879 ("ARM: Make the sched_clock
framework mandatory"). But a select statement for it popped up again
through commit 828989ad87 ("ARM: keystone: Add minimal TI Keystone
platform support"). Drop that statement, as it is useless.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
[santosh.shilimkar@ti.com: Minor edit in the subject]
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Selecting this symbol causes a build warning without SMP:
warning: (ARCH_KEYSTONE) selects ARM_ERRATA_798181 which has unmet direct dependencies (CPU_V7 && SMP)
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Add basic SMP support for Keystone machines. This does not
include support for CPU hotplug for now.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: arm@kernel.org
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Texas Instruments Keystone family of multi-core devices are
based on ARM Cortex A15. Patch adds basic definitions for a
new Keystone sub-architecture in ARM.
The TCI66xxK2H Communications Infrastructure Keystone SoCs
are member of the C66x family based on TI's new KeyStone 2
multi-core SoC Architecture designed specifically for high
performance wireless and networking infrastructure applications.
The SOCs contains many subsystems like Cortex A15 ARM CorePacs,
C66XX DSP CorePacs, MSMC memory controller, Tera Net bus,
IP Network, Navigator, Hyperlink, 1G/10G Ethernet, Radio layers
and queue based communication systems.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: arm@kernel.org
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
