[Why]
When no displays are currently enabled, display driver should not
disallow PSTATE switching.
[How]
Allow PSTATE switching if either the active configuration supports it,
or there are no active displays.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Anson Jacob <anson.jacob@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Why:
dml20v2_ModeSupportAndSystemConfigurationFull() didn't check against
DesiredBPP, so it doesn't work correctly when DesiredBPP can't be satisfied.
How:
Port the TruncToValidBPP() version from display_mode_vba_21.c to
display_mode_vba_20v2.c.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Bing Guo <bing.guo@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Anson Jacob <anson.jacob@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why/How]
Add logging statements to assist in debugging
errors in the BIOS object table.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Anson Jacob <anson.jacob@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
FW version check doesn't allow dmu_stg to support cached inbox,
which yields much better performance than region 4.
[How]
Check a range of fw versions, rather than a simple greater than check.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Wyatt Wood <wyatt.wood@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Anson Jacob <anson.jacob@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Why:
Function decide_dp_link_settings() loops infinitely when required bandwidth
can't be supported.
How:
Check the required bandwidth against verified_link_cap before trying to
find a link setting for it.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Bing Guo <bing.guo@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Anson Jacob <anson.jacob@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DMCUB encounters a page fault/double exception with driver direct load
because DMCUB is not held in soft reset after releasing secure reset.
The clean shutdown sequence via GPINT is also not executed in this
sequence which leaves hardware behavior in an indeterminate state.
[How]
Move reset earlier in the sequence.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Anson Jacob <anson.jacob@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
If the BIOS table is invalid or corrupt then get_i2c_info can fail
and we dereference a NULL pointer.
[How]
Check that ddc_pin is not NULL before using it and log an error if it
is because this is unexpected.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Anson Jacob <anson.jacob@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We need hardware reset before hardware init for backdoor loading when
we're reusing the framebuffer memory.
[How]
This doesn't run if the hardware isn't already in reset from software
perspective. The reset function has register level checks so just
remove the software one here.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Anson Jacob <anson.jacob@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Since Linux 5.9.0, DRM has provided vrr_range debugfs for
all connectors. Reporting Freesync capability to vrr_range
debugfs entry registered in Linux DM no longer works.
[How]
Report min/max vertical frequency to vrr_range debugfs entrry
created by DRM connectors. Remove vrr_range debugfs entry from
Linux DM.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Anson Jacob <anson.jacob@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
These can differ per ASIC or not be present. Don't call the dcn20 ones
directly but rather the ones defined by the ASIC init table.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Anson Jacob <anson.jacob@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Previously as MPO + ODM Combine was not supported, finding secondary pipes
for each case was mutually exclusive. Now that both are supported at the same
time, both cases should be taken into account when finding a secondary pipe.
[HOW]
If a secondary pipe cannot be found based on previous bottom pipe,
search for a second pipe using next_odm_pipe instead.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Sung Lee <sung.lee@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Anson Jacob <anson.jacob@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
FEC over eDP support is incomplete.
[How]
Disable FEC over eDP.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Mike Hsieh <chun-wei.hsieh@amd.com>
Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com>
Acked-by: Anson Jacob <anson.jacob@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Heavy corruption or blank screen reported on wake,
with 6k display connected and FEC enabled
[how]
When Disable/Enable stream for display pipes on HPDRX,
DC should take into account ODM split pipes.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Vladimir Stempen <vladimir.stempen@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Anson Jacob <anson.jacob@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When using cancel_delayed_work_sync, there's no need
to flush_delayed_work first. This sequence can lead to
a redundant loop of work executing.
Signed-off-by: Jingwen Chen <Jingwen.Chen2@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
the SpareX is reserved by SMU firmware, the driver is never use it.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amd-drm-next-5.12-2021-01-20:
amdgpu:
- Fix non-x86 build
- W=1 fixes from Lee Jones
- Enable GPU reset on Navy Flounder
- Kernel doc fixes
- SMU workload profile fixes for APUs
- Display updates
- SR-IOV fixes
- Vangogh SMU feature enablment and bug fixes
- GPU reset support for Vangogh
- Misc cleanups
Conflicts:
drivers/gpu/drm/amd/display/dc/dcn10/dcn10_mpc.c
Resolve the conflict by picking the initialization value from amd from
f03e80d2e8 ("drm/amd/display: Initialize stack variable") over the
one Linus picked in 61d791365b ("drm/amd/display: avoid
uninitialized variable warning"). It shouldn't matter.
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210120060951.22600-1-alexander.deucher@amd.com
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
UAPI Changes:
- Fix fourcc macro for amlogic video fbc.
Cross-subsystem Changes:
- Export pci_rebar_bytes_to_size.
- Add a PCI quirk to increase bar0 for RX 5600 XT Pulse to max possible size.
- Convert devicetree bindings to use the OF graph schema.
- Update s6e63m0 bindings.
- Make omapfb2 DSI_CM incompatible with drm/omap2 DSI-CM because of
module conflicts.
- Add Zack Rusin as vmwgfx maintainer.
- Add CONFIG_DMABUF_DEBUG for validating dma-buf users don't loo kat struct page when importing or detaching.
Core Changes:
- Remove references to drm_device.pdev
- Fix regression in ttm_bo_move_to_lru_tail().
- Assorted docbook updates.
- Do not send dp-mst hotplug events on error when probing.
- Move some agp macros to agpsupport.c, so it's not always compiled.
- Move drm_need_swiotlb.h to drm_cache.c
- Only build drm_memory.o for legacy drivers, and move CONFIG_DRM_VM to legacy.
- Nuke drm_device.hose
- Warn when the ttm resource manager is non-empty when disabling.
- Assorted small fixes.
Driver Changes:
- Small assorted fixes in radeon, v3d, hisilicon, mipi-dbi, panfrost, hibmc, vc4, amdgpu, vkms, vmwgfx.
- Move hisilicon to use simple encode.
- Add writeback connector to vkms.
- Add support for BT2020 to DE3.
- Use gem prime mmap helpers in vc4, and move the mmap function upwards.
- Use managed drm device, and cleanup error paths and display registers in vmwgfx.
- Use correct bus_format and connector_type for innolux_n116bge.
- Fix a lot of warnings with W=1 (Lee Jones)
-----BEGIN PGP SIGNATURE-----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=JIou
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2021-01-19' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.12:
UAPI Changes:
- Fix fourcc macro for amlogic video fbc.
Cross-subsystem Changes:
- Export pci_rebar_bytes_to_size.
- Add a PCI quirk to increase bar0 for RX 5600 XT Pulse to max possible size.
- Convert devicetree bindings to use the OF graph schema.
- Update s6e63m0 bindings.
- Make omapfb2 DSI_CM incompatible with drm/omap2 DSI-CM because of
module conflicts.
- Add Zack Rusin as vmwgfx maintainer.
- Add CONFIG_DMABUF_DEBUG for validating dma-buf users don't loo kat struct page when importing or detaching.
Core Changes:
- Remove references to drm_device.pdev
- Fix regression in ttm_bo_move_to_lru_tail().
- Assorted docbook updates.
- Do not send dp-mst hotplug events on error when probing.
- Move some agp macros to agpsupport.c, so it's not always compiled.
- Move drm_need_swiotlb.h to drm_cache.c
- Only build drm_memory.o for legacy drivers, and move CONFIG_DRM_VM to legacy.
- Nuke drm_device.hose
- Warn when the ttm resource manager is non-empty when disabling.
- Assorted small fixes.
Driver Changes:
- Small assorted fixes in radeon, v3d, hisilicon, mipi-dbi, panfrost, hibmc, vc4, amdgpu, vkms, vmwgfx.
- Move hisilicon to use simple encode.
- Add writeback connector to vkms.
- Add support for BT2020 to DE3.
- Use gem prime mmap helpers in vc4, and move the mmap function upwards.
- Use managed drm device, and cleanup error paths and display registers in vmwgfx.
- Use correct bus_format and connector_type for innolux_n116bge.
- Fix a lot of warnings with W=1 (Lee Jones)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/5c3ad775-48ce-33ee-e4c6-a5e1e540f845@linux.intel.com
This patch is to fix below build error while we are using the kconfig
without x86.
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu11/vangogh_ppt.c: In function
'vangogh_get_smu_metrics_data':
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu11/vangogh_ppt.c:300:10:
error: 'boot_cpu_data' undeclared (first use in this function); did you
mean 'boot_cpuid'?
300 | boot_cpu_data.x86_max_cores * sizeof(uint16_t));
| ^~~~~~~~~~~~~
| boot_cpuid
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu11/vangogh_ppt.c: In function
'vangogh_read_sensor':
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu11/vangogh_ppt.c:1320:11:
error: 'boot_cpu_data' undeclared (first use in this function); did you
mean 'boot_cpuid'?
1320 | *size = boot_cpu_data.x86_max_cores * sizeof(uint16_t);
| ^~~~~~~~~~~~~
| boot_cpuid
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu11/vangogh_ppt.c: In function
'vangogh_od_edit_dpm_table':
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu11/vangogh_ppt.c:1460:19:
error: 'boot_cpu_data' undeclared (first use in this function); did you
mean 'boot_cpuid'?
1460 | if (input[0] >= boot_cpu_data.x86_max_cores) {
| ^~~~~~~~~~~~~
| boot_cpuid
v2: fix #ifdef and add comment for APU only
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Commit 8f66090b7b ("drm/amdgpu: Remove references to struct drm_device.pdev")
accidentally adds an initialization of adev, which isn't used anywhere. This
caused a compiler warning on the unused variable, remove it.
Fixes: 8f66090b7b ("drm/amdgpu: Remove references to struct drm_device.pdev")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
To avoid any possible use after free.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/414814/
CC: stable@vger.kernel.org
Signed-off-by: Christian König <christian.koenig@amd.com>
Invalidate all BOs CPU mappings once device is removed.
v3: Move the code from TTM into drm_dev_unplug
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/414809/
Signed-off-by: Christian König <christian.koenig@amd.com>
We have DRM drivers based on USB, SPI and platform devices. All of them
are fine with storing their device reference in struct drm_device.dev.
PCI devices should be no exception. Therefore struct drm_device.pdev is
deprecated.
Instead upcast from struct drm_device.dev with to_pci_dev(). PCI-specific
code can use dev_is_pci() to test for a PCI device. This patch changes
the DRM core code and documentation accordingly.
v4:
* split-off pdev deprecation into separate patch
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Andy Lavr <andy.lavr@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210118131420.15874-2-tzimmermann@suse.de
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/drm_agpsupport.c:61: warning: Function parameter or member 'dev' not described in 'drm_agp_info'
drivers/gpu/drm/drm_agpsupport.c:61: warning: Function parameter or member 'info' not described in 'drm_agp_info'
drivers/gpu/drm/drm_agpsupport.c:105: warning: Function parameter or member 'dev' not described in 'drm_agp_acquire'
drivers/gpu/drm/drm_agpsupport.c:132: warning: Function parameter or member 'dev' not described in 'drm_agp_acquire_ioctl'
drivers/gpu/drm/drm_agpsupport.c:132: warning: Function parameter or member 'data' not described in 'drm_agp_acquire_ioctl'
drivers/gpu/drm/drm_agpsupport.c:132: warning: Function parameter or member 'file_priv' not described in 'drm_agp_acquire_ioctl'
drivers/gpu/drm/drm_agpsupport.c:145: warning: Function parameter or member 'dev' not described in 'drm_agp_release'
drivers/gpu/drm/drm_agpsupport.c:171: warning: Function parameter or member 'dev' not described in 'drm_agp_enable'
drivers/gpu/drm/drm_agpsupport.c:171: warning: Function parameter or member 'mode' not described in 'drm_agp_enable'
drivers/gpu/drm/drm_agpsupport.c:203: warning: Function parameter or member 'dev' not described in 'drm_agp_alloc'
drivers/gpu/drm/drm_agpsupport.c:203: warning: Function parameter or member 'request' not described in 'drm_agp_alloc'
drivers/gpu/drm/drm_agpsupport.c:256: warning: Function parameter or member 'dev' not described in 'drm_agp_lookup_entry'
drivers/gpu/drm/drm_agpsupport.c:256: warning: Function parameter or member 'handle' not described in 'drm_agp_lookup_entry'
drivers/gpu/drm/drm_agpsupport.c:279: warning: Function parameter or member 'dev' not described in 'drm_agp_unbind'
drivers/gpu/drm/drm_agpsupport.c:279: warning: Function parameter or member 'request' not described in 'drm_agp_unbind'
drivers/gpu/drm/drm_agpsupport.c:318: warning: Function parameter or member 'dev' not described in 'drm_agp_bind'
drivers/gpu/drm/drm_agpsupport.c:318: warning: Function parameter or member 'request' not described in 'drm_agp_bind'
drivers/gpu/drm/drm_agpsupport.c:363: warning: Function parameter or member 'dev' not described in 'drm_agp_free'
drivers/gpu/drm/drm_agpsupport.c:363: warning: Function parameter or member 'request' not described in 'drm_agp_free'
drivers/gpu/drm/drm_agpsupport.c:404: warning: Function parameter or member 'dev' not described in 'drm_agp_init'
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Faith <faith@valinux.com>
Cc: Gareth Hughes <gareth@valinux.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210115181601.3432599-24-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/gma500/mdfld_intel_display.c:103: warning: Function parameter or member 'dev' not described in 'psb_intel_panel_fitter_pipe'
drivers/gpu/drm/gma500/mdfld_intel_display.c:273: warning: Function parameter or member 'crtc' not described in 'mdfld_crtc_dpms'
drivers/gpu/drm/gma500/mdfld_intel_display.c:273: warning: Function parameter or member 'mode' not described in 'mdfld_crtc_dpms'
drivers/gpu/drm/gma500/mdfld_intel_display.c:609: warning: Function parameter or member 'crtc' not described in 'mdfldFindBestPLL'
drivers/gpu/drm/gma500/mdfld_intel_display.c:609: warning: Function parameter or member 'target' not described in 'mdfldFindBestPLL'
drivers/gpu/drm/gma500/mdfld_intel_display.c:609: warning: Function parameter or member 'refclk' not described in 'mdfldFindBestPLL'
drivers/gpu/drm/gma500/mdfld_intel_display.c:609: warning: Function parameter or member 'best_clock' not described in 'mdfldFindBestPLL'
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Eric Anholt <eric@anholt.net>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210115181601.3432599-23-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/gma500/mdfld_dsi_output.c:71: warning: Function parameter or member 'dev' not described in 'mdfld_dsi_gen_fifo_ready'
drivers/gpu/drm/gma500/mdfld_dsi_output.c:71: warning: Function parameter or member 'gen_fifo_stat_reg' not described in 'mdfld_dsi_gen_fifo_ready'
drivers/gpu/drm/gma500/mdfld_dsi_output.c:71: warning: Function parameter or member 'fifo_stat' not described in 'mdfld_dsi_gen_fifo_ready'
drivers/gpu/drm/gma500/mdfld_dsi_output.c:95: warning: Function parameter or member 'dsi_config' not described in 'mdfld_dsi_brightness_init'
drivers/gpu/drm/gma500/mdfld_dsi_output.c:95: warning: Function parameter or member 'pipe' not described in 'mdfld_dsi_brightness_init'
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: jim liu <jim.liu@intel.com>
Cc: Jackie Li <yaodong.li@intel.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210115181601.3432599-22-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/gma500/oaktrail_crtc.c:184: warning: Function parameter or member 'limit' not described in 'mrst_lvds_find_best_pll'
drivers/gpu/drm/gma500/oaktrail_crtc.c:184: warning: Function parameter or member 'crtc' not described in 'mrst_lvds_find_best_pll'
drivers/gpu/drm/gma500/oaktrail_crtc.c:184: warning: Function parameter or member 'target' not described in 'mrst_lvds_find_best_pll'
drivers/gpu/drm/gma500/oaktrail_crtc.c:184: warning: Function parameter or member 'refclk' not described in 'mrst_lvds_find_best_pll'
drivers/gpu/drm/gma500/oaktrail_crtc.c:184: warning: Function parameter or member 'best_clock' not described in 'mrst_lvds_find_best_pll'
drivers/gpu/drm/gma500/oaktrail_crtc.c:215: warning: Function parameter or member 'crtc' not described in 'oaktrail_crtc_dpms'
drivers/gpu/drm/gma500/oaktrail_crtc.c:215: warning: Function parameter or member 'mode' not described in 'oaktrail_crtc_dpms'
drivers/gpu/drm/gma500/oaktrail_crtc.c:345: warning: Function parameter or member 'dev' not described in 'oaktrail_panel_fitter_pipe'
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210115181601.3432599-21-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/gma500/oaktrail_lvds.c:38: warning: Function parameter or member 'dev' not described in 'oaktrail_lvds_set_power'
drivers/gpu/drm/gma500/oaktrail_lvds.c:38: warning: Function parameter or member 'gma_encoder' not described in 'oaktrail_lvds_set_power'
drivers/gpu/drm/gma500/oaktrail_lvds.c:38: warning: Function parameter or member 'on' not described in 'oaktrail_lvds_set_power'
drivers/gpu/drm/gma500/oaktrail_lvds.c:291: warning: Function parameter or member 'mode_dev' not described in 'oaktrail_lvds_init'
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Eric Anholt <eric@anholt.net>
Cc: Jesse Barnes <jesse.barnes@intel.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210115181601.3432599-20-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/gma500/oaktrail_lvds_i2c.c: In function ‘get_clock’:
drivers/gpu/drm/gma500/oaktrail_lvds_i2c.c:69:11: warning: variable ‘tmp’ set but not used [-Wunused-but-set-variable]
drivers/gpu/drm/gma500/oaktrail_lvds_i2c.c: In function ‘get_data’:
drivers/gpu/drm/gma500/oaktrail_lvds_i2c.c:83:11: warning: variable ‘tmp’ set but not used [-Wunused-but-set-variable]
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Jan Safrata <jan.nikitenko@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210115181601.3432599-19-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/gma500/cdv_intel_dp.c:315: warning: Function parameter or member 'encoder' not described in 'is_edp'
drivers/gpu/drm/gma500/cdv_intel_dp.c:315: warning: Excess function parameter 'intel_dp' description in 'is_edp'
drivers/gpu/drm/gma500/cdv_intel_dp.c:1698: warning: Function parameter or member 'connector' not described in 'cdv_intel_dp_detect'
drivers/gpu/drm/gma500/cdv_intel_dp.c:1698: warning: Function parameter or member 'force' not described in 'cdv_intel_dp_detect'
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Keith Packard <keithp@keithp.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210115181601.3432599-18-lee.jones@linaro.org
Link: https://patchwork.freedesktop.org/patch/msgid/20210115181601.3432599-17-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/gma500/cdv_intel_lvds.c:83: warning: Function parameter or member 'dev' not described in 'cdv_intel_lvds_set_backlight'
drivers/gpu/drm/gma500/cdv_intel_lvds.c:83: warning: Function parameter or member 'level' not described in 'cdv_intel_lvds_set_backlight'
drivers/gpu/drm/gma500/cdv_intel_lvds.c:107: warning: Function parameter or member 'dev' not described in 'cdv_intel_lvds_set_power'
drivers/gpu/drm/gma500/cdv_intel_lvds.c:107: warning: Function parameter or member 'encoder' not described in 'cdv_intel_lvds_set_power'
drivers/gpu/drm/gma500/cdv_intel_lvds.c:107: warning: Function parameter or member 'on' not described in 'cdv_intel_lvds_set_power'
drivers/gpu/drm/gma500/cdv_intel_lvds.c:298: warning: Function parameter or member 'connector' not described in 'cdv_intel_lvds_get_modes'
drivers/gpu/drm/gma500/cdv_intel_lvds.c:480: warning: Function parameter or member 'mode_dev' not described in 'cdv_intel_lvds_init'
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Eric Anholt <eric@anholt.net>
Cc: Jesse Barnes <jesse.barnes@intel.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210115181601.3432599-17-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/gma500/cdv_intel_display.c:559: warning: Function parameter or member 'dev' not described in 'cdv_intel_panel_fitter_pipe'
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Eric Anholt <eric@anholt.net>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210115181601.3432599-16-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/gma500/cdv_intel_crt.c:138: warning: Function parameter or member 'connector' not described in 'cdv_intel_crt_detect_hotplug'
drivers/gpu/drm/gma500/cdv_intel_crt.c:138: warning: Function parameter or member 'force' not described in 'cdv_intel_crt_detect_hotplug'
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Eric Anholt <eric@anholt.net>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210115181601.3432599-15-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/drm_dp_helper.c:965: warning: Function parameter or member 'color_spc' not described in 'drm_dp_downstream_rgb_to_ycbcr_conversion'
drivers/gpu/drm/drm_dp_helper.c:965: warning: Excess function parameter 'colorspc' description in 'drm_dp_downstream_rgb_to_ycbcr_conversion'
drivers/gpu/drm/drm_dp_helper.c:2678: warning: Function parameter or member 'enable_frl_ready_hpd' not described in 'drm_dp_pcon_frl_prepare'
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210115181601.3432599-14-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/gma500/psb_irq.c:134: warning: Function parameter or member 'dev' not described in 'mid_pipe_event_handler'
drivers/gpu/drm/gma500/psb_irq.c:134: warning: Function parameter or member 'pipe' not described in 'mid_pipe_event_handler'
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210115181601.3432599-13-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/gma500/psb_intel_sdvo.c:230: warning: Function parameter or member 'psb_intel_sdvo' not described in 'psb_intel_sdvo_write_sdvox'
drivers/gpu/drm/gma500/psb_intel_sdvo.c:230: warning: Function parameter or member 'val' not described in 'psb_intel_sdvo_write_sdvox'
drivers/gpu/drm/gma500/psb_intel_sdvo.c:598: warning: Function parameter or member 'psb_intel_sdvo' not described in 'psb_intel_sdvo_get_trained_inputs'
drivers/gpu/drm/gma500/psb_intel_sdvo.c:598: warning: Function parameter or member 'input_1' not described in 'psb_intel_sdvo_get_trained_inputs'
drivers/gpu/drm/gma500/psb_intel_sdvo.c:598: warning: Function parameter or member 'input_2' not described in 'psb_intel_sdvo_get_trained_inputs'
drivers/gpu/drm/gma500/psb_intel_sdvo.c:1831: warning: Function parameter or member 'dev_priv' not described in 'psb_intel_sdvo_select_ddc_bus'
drivers/gpu/drm/gma500/psb_intel_sdvo.c:1831: warning: Function parameter or member 'sdvo' not described in 'psb_intel_sdvo_select_ddc_bus'
drivers/gpu/drm/gma500/psb_intel_sdvo.c:1831: warning: Function parameter or member 'reg' not described in 'psb_intel_sdvo_select_ddc_bus'
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Jesse Barnes <jesse.barnes@intel.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210115181601.3432599-12-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/gma500/mmu.c: In function ‘psb_mmu_insert_pfn_sequence’:
drivers/gpu/drm/gma500/mmu.c:651:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210115181601.3432599-7-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/gma500/power.c:190: warning: Excess function parameter 'state' description in 'gma_power_suspend'
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Benjamin Defnet <benjamin.r.defnet@intel.com>
Cc: Rajesh Poornachandran <rajesh.poornachandran@intel.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210115181313.3431493-39-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/gma500/mmu.c:420:10: warning: no previous prototype for ‘psb_get_default_pd_addr’ [-Wmissing-prototypes]
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210115181313.3431493-35-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/gma500/gem.c:59:5: warning: no previous prototype for ‘psb_gem_create’ [-Wmissing-prototypes]
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210115181313.3431493-33-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/gma500/gem.h:13:57: warning: ‘struct drm_device’ declared inside parameter list will not be visible outside of this definition or declaration
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210115181313.3431493-32-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/gma500/psb_intel_modes.c:17: warning: Function parameter or member 'adapter' not described in 'psb_intel_ddc_probe'
drivers/gpu/drm/gma500/psb_intel_modes.c:51: warning: Function parameter or member 'adapter' not described in 'psb_intel_ddc_get_modes'
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Jesse Barnes <jesse.barnes@intel.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210115181313.3431493-31-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/gma500/psb_intel_lvds.c:635: warning: Function parameter or member 'mode_dev' not described in 'psb_intel_lvds_init'
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Eric Anholt <eric@anholt.net>
Cc: Jesse Barnes <jesse.barnes@intel.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210115181313.3431493-26-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/gma500/psb_intel_display.c:79: warning: Function parameter or member 'dev' not described in 'psb_intel_panel_fitter_pipe'
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Eric Anholt <eric@anholt.net>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210115181313.3431493-25-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/gma500/gma_device.c:10:6: warning: no previous prototype for ‘gma_get_core_freq’ [-Wmissing-prototypes]
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210115181313.3431493-23-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/gma500/gma_display.c:27: warning: Function parameter or member 'crtc' not described in 'gma_pipe_has_type'
drivers/gpu/drm/gma500/gma_display.c:27: warning: Function parameter or member 'type' not described in 'gma_pipe_has_type'
drivers/gpu/drm/gma500/gma_display.c:190: warning: Function parameter or member 'crtc' not described in 'gma_crtc_dpms'
drivers/gpu/drm/gma500/gma_display.c:190: warning: Function parameter or member 'mode' not described in 'gma_crtc_dpms'
drivers/gpu/drm/gma500/gma_display.c:573: warning: Function parameter or member 'crtc' not described in 'gma_crtc_save'
drivers/gpu/drm/gma500/gma_display.c:616: warning: Function parameter or member 'crtc' not described in 'gma_crtc_restore'
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Eric Anholt <eric@anholt.net>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210115181313.3431493-22-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/gma500/power.c:101: warning: Function parameter or member 'pdev' not described in 'gma_resume_display'
drivers/gpu/drm/gma500/power.c:155: warning: Function parameter or member 'pdev' not described in 'gma_resume_pci'
drivers/gpu/drm/gma500/power.c:155: warning: Excess function parameter 'dev' description in 'gma_resume_pci'
drivers/gpu/drm/gma500/power.c:189: warning: Function parameter or member '_dev' not described in 'gma_power_suspend'
drivers/gpu/drm/gma500/power.c:189: warning: Excess function parameter 'pdev' description in 'gma_power_suspend'
drivers/gpu/drm/gma500/power.c:189: warning: Excess function parameter 'state' description in 'gma_power_suspend'
drivers/gpu/drm/gma500/power.c:216: warning: Function parameter or member '_dev' not described in 'gma_power_resume'
drivers/gpu/drm/gma500/power.c:216: warning: Excess function parameter 'pdev' description in 'gma_power_resume'
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Benjamin Defnet <benjamin.r.defnet@intel.com>
Cc: Rajesh Poornachandran <rajesh.poornachandran@intel.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210115181313.3431493-20-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/gma500/mmu.c:316:20: warning: no previous prototype for ‘psb_mmu_pt_alloc_map_lock’ [-Wmissing-prototypes]
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210115181313.3431493-19-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/gma500/intel_i2c.c:108: warning: Excess function parameter 'output' description in 'psb_intel_i2c_create'
drivers/gpu/drm/gma500/intel_i2c.c:153: warning: Function parameter or member 'chan' not described in 'psb_intel_i2c_destroy'
drivers/gpu/drm/gma500/intel_i2c.c:153: warning: Excess function parameter 'output' description in 'psb_intel_i2c_destroy'
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Eric Anholt <eric@anholt.net>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210115181313.3431493-18-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/gma500/intel_bios.c:581: warning: Function parameter or member 'dev' not described in 'psb_intel_destroy_bios'
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Eric Anholt <eric@anholt.net>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210115181313.3431493-17-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/gma500/gem.c:57:5: warning: no previous prototype for ‘psb_gem_create’ [-Wmissing-prototypes]
drivers/gpu/drm/gma500/gem.c:59: warning: Function parameter or member 'stolen' not described in 'psb_gem_create'
drivers/gpu/drm/gma500/gem.c:59: warning: Function parameter or member 'align' not described in 'psb_gem_create'
drivers/gpu/drm/gma500/gem.c:110: warning: Function parameter or member 'file' not described in 'psb_gem_dumb_create'
drivers/gpu/drm/gma500/gem.c:110: warning: Excess function parameter 'drm_file' description in 'psb_gem_dumb_create'
drivers/gpu/drm/gma500/gem.c:135: warning: Excess function parameter 'vma' description in 'psb_gem_fault'
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210115181313.3431493-16-lee.jones@linaro.org
