Commit 39de828179 ("RDS: Main header file") declared but never implemented
rds_trans_init() and rds_trans_exit(), remove it.
Commit d37c935905 ("RDS: Move loop-only function to loop.c") removed the
implementation rds_message_inc_free() but not the declaration.
Since commit 55b7ed0b58 ("RDS: Common RDMA transport code")
rds_rdma_conn_connect() is never implemented and used.
rds_tcp_map_seq() is never implemented and used since
commit 70041088e3 ("RDS: Add TCP transport to RDS").
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rework the remaining setsockopt code to pass a sockptr_t instead of a
plain user pointer. This removes the last remaining set_fs(KERNEL_DS)
outside of architecture specific code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Stefan Schmidt <stefan@datenfreihafen.org> [ieee802154]
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
In testing with mprds enabled, Oracle Cluster nodes after reboot were
not able to communicate with others nodes and so failed to rejoin
the cluster. Peers with lower IP address initiated connection but the
node could not respond as it choose a different path and could not
initiate a connection as it had a higher IP address.
With this patch, when a node sends out a packet and the selected path
is down, all other paths are also checked and any down paths are
re-connected.
Reviewed-by: Ka-cheong Poon <ka-cheong.poon@oracle.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Signed-off-by: Somasundaram Krishnasamy <somasundaram.krishnasamy@oracle.com>
Signed-off-by: Rao Shoaib <rao.shoaib@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Returning the error code via a 'int *ret' when the function returns a
pointer is very un-kernely and causes gcc 10's static analysis to choke:
net/rds/message.c: In function ‘rds_message_map_pages’:
net/rds/message.c:358:10: warning: ‘ret’ may be used uninitialized in this function [-Wmaybe-uninitialized]
358 | return ERR_PTR(ret);
Use a typical ERR_PTR return instead.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In rds_free_mr(), it calls rds_destroy_mr(mr) directly. But this
defeats the purpose of reference counting and makes MR free handling
impossible. It means that holding a reference does not guarantee that
it is safe to access some fields. For example, In
rds_cmsg_rdma_dest(), it increases the ref count, unlocks and then
calls mr->r_trans->sync_mr(). But if rds_free_mr() (and
rds_destroy_mr()) is called in between (there is no lock preventing
this to happen), r_trans_private is set to NULL, causing a panic.
Similar issue is in rds_rdma_unuse().
Reported-by: zerons <sironhide0null@gmail.com>
Signed-off-by: Ka-Cheong Poon <ka-cheong.poon@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
And removed rds_mr_put().
Signed-off-by: Ka-Cheong Poon <ka-cheong.poon@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
On-Demand-Paging MRs are registered using ib_reg_user_mr and
unregistered with ib_dereg_mr.
Signed-off-by: Hans Westgaard Ry <hans.westgaard.ry@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Add the RDMA cookie and RX timestamp to the usercopy whitelist.
After the introduction of hardened usercopy whitelisting
(https://lwn.net/Articles/727322/), a warning is displayed when the
RDMA cookie or RX timestamp is copied to userspace:
kernel: WARNING: CPU: 3 PID: 5750 at
mm/usercopy.c:81 usercopy_warn+0x8e/0xa6
[...]
kernel: Call Trace:
kernel: __check_heap_object+0xb8/0x11b
kernel: __check_object_size+0xe3/0x1bc
kernel: put_cmsg+0x95/0x115
kernel: rds_recvmsg+0x43d/0x620 [rds]
kernel: sock_recvmsg+0x43/0x4a
kernel: ___sys_recvmsg+0xda/0x1e6
kernel: ? __handle_mm_fault+0xcae/0xf79
kernel: __sys_recvmsg+0x51/0x8a
kernel: SyS_recvmsg+0x12/0x1c
kernel: do_syscall_64+0x79/0x1ae
When the whitelisting feature was introduced, the memory for the RDMA
cookie and RX timestamp in RDS was not added to the whitelist, causing
the warning above.
Signed-off-by: Dag Moxnes <dag.moxnes@oracle.com>
Tested-by: Jenny <jenny.x.xu@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Original commit from 2011 updated to include a change by
Yuval Shaia <yuval.shaia@oracle.com>
that adds a new statistic counter "send_stuck_rm"
to capture the messages looping exessively
in the send path.
Signed-off-by: Gerd Rausch <gerd.rausch@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
RDS composite message(rdma + control) user notification needs to be
triggered once the full message is delivered and such a fix was
added as part of commit 941f8d55f6 ("RDS: RDMA: Fix the composite
message user notification"). But rds_send_remove_from_sock is missing
data part notify check and hence at times the user don't get
notification which isn't desirable.
One way is to fix the rds_send_remove_from_sock to check of that case
but considering the ordering complexity with completion handler and
rdma + control messages are always dispatched back to back in same send
context, just delaying the signaled completion on rmda work request also
gets the desired behaviour. i.e Notifying application only after
RDMA + control message send completes. So patch updates the earlier
fix with this approach. The delay signaling completions of rdma op
till the control message send completes fix was done by Venkat
Venkatsubra in downstream kernel.
Reviewed-and-tested-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Reviewed-by: Gerd Rausch <gerd.rausch@oracle.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
RDMA transport maps user tos to underline virtual lanes(VL)
for IB or DSCP values. RDMA CM transport abstract thats for
RDS. TCP transport makes use of default priority 0 and maps
all user tos values to it.
Reviewed-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
[yanjun.zhu@oracle.com: Adapted original patch with ipv6 changes]
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
RDS Service type (TOS) is user-defined and needs to be configured
via RDS IOCTL interface. It must be set before initiating any
traffic and once set the TOS can not be changed. All out-going
traffic from the socket will be associated with its TOS.
Reviewed-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
[yanjun.zhu@oracle.com: Adapted original patch with ipv6 changes]
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Mark RDSv3.1 as compat version and add v4.1 version macro's.
Subsequent patches enable TOS(Type of Service) feature which is
tied with v4.1 for RDMA transport.
Reviewed-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
[yanjun.zhu@oracle.com: Adapted original patch with ipv6 changes]
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
per comment from Leon in rdma mailing list
https://lkml.org/lkml/2018/10/31/312 :
Please don't forget to remove user triggered WARN_ON.
https://lwn.net/Articles/769365/
"Greg Kroah-Hartman raised the problem of core kernel API code that will
use WARN_ON_ONCE() to complain about bad usage; that will not generate
the desired result if WARN_ON_ONCE() is configured to crash the machine.
He was told that the code should just call pr_warn() instead, and that
the called function should return an error in such situations. It was
generally agreed that any WARN_ON() or WARN_ON_ONCE() calls that can be
triggered from user space need to be fixed."
in addition harden rds_sendmsg to detect and overcome issues with
invalid sg count and fail the sendmsg.
Suggested-by: Leon Romanovsky <leon@kernel.org>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: shamir rabinovitch <shamir.rabinovitch@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
rds is the last in-kernel user of the old do_gettimeofday()
function. Convert it over to ktime_get_real() to make it
work more like the generic socket timestamps, and to let
us kill off do_gettimeofday().
A follow-up patch will have to change the user space interface
to deal better with 32-bit tasks, which may use an incompatible
layout for 'struct timespec'.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The BTF conflicts were simple overlapping changes.
The virtio_net conflict was an overlap of a fix of statistics counter,
happening alongisde a move over to a bonafide statistics structure
rather than counting value on the stack.
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch enables RDS to use IPv6 addresses. For RDS/TCP, the
listener is now an IPv6 endpoint which accepts both IPv4 and IPv6
connection requests. RDS/RDMA/IB uses a private data (struct
rds_ib_connect_private) exchange between endpoints at RDS connection
establishment time to support RDMA. This private data exchange uses a
32 bit integer to represent an IP address. This needs to be changed in
order to support IPv6. A new private data struct
rds6_ib_connect_private is introduced to handle this. To ensure
backward compatibility, an IPv6 capable RDS stack uses another RDMA
listener port (RDS_CM_PORT) to accept IPv6 connection. And it
continues to use the original RDS_PORT for IPv4 RDS connections. When
it needs to communicate with an IPv6 peer, it uses the RDS_CM_PORT to
send the connection set up request.
v5: Fixed syntax problem (David Miller).
v4: Changed port history comments in rds.h (Sowmini Varadhan).
v3: Added support to set up IPv4 connection using mapped address
(David Miller).
Added support to set up connection between link local and non-link
addresses.
Various review comments from Santosh Shilimkar and Sowmini Varadhan.
v2: Fixed bound and peer address scope mismatched issue.
Added back rds_connect() IPv6 changes.
Signed-off-by: Ka-Cheong Poon <ka-cheong.poon@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch changes the internal representation of an IP address to use
struct in6_addr. IPv4 address is stored as an IPv4 mapped address.
All the functions which take an IP address as argument are also
changed to use struct in6_addr. But RDS socket layer is not modified
such that it still does not accept IPv6 address from an application.
And RDS layer does not accept nor initiate IPv6 connections.
v2: Fixed sparse warnings.
Signed-off-by: Ka-Cheong Poon <ka-cheong.poon@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Loop transport which is self loopback, remote port congestion
update isn't relevant. Infact the xmit path already ignores it.
Receive path needs to do the same.
Reported-by: syzbot+4c20b3866171ce8441d2@syzkaller.appspotmail.com
Reviewed-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Avoid VLA[1] by using an already allocated buffer passed
by the caller.
[1] https://lkml.org/lkml/2018/3/7/621
Signed-off-by: Salvatore Mesoraca <s.mesoraca16@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 401910db4c ("rds: deliver zerocopy completion notification
with data") removes support fo r zerocopy completion notification
on the sk_error_queue, thus we no longer need to track the cookie
information in sk_buff structures.
This commit removes the struct sk_buff_head rs_zcookie_queue by
a simpler list that results in a smaller memory footprint as well
as more efficient memory_allocation time.
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is an optimization over commit 01883eda72
("rds: support for zcopy completion notification") for PF_RDS sockets.
RDS applications are predominantly request-response transactions, so
it is more efficient to reduce the number of system calls and have
zerocopy completion notification delivered as ancillary data on the
POLLIN channel.
Cookies are passed up as ancillary data (at level SOL_RDS) in a
struct rds_zcopy_cookies when the returned value of recvmsg() is
greater than, or equal to, 0. A max of RDS_MAX_ZCOOKIES may be passed
with each message.
This commit removes support for zerocopy completion notification on
MSG_ERRQUEUE for PF_RDS sockets.
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the MSG_ZEROCOPY flag is specified with rds_sendmsg(), and,
if the SO_ZEROCOPY socket option has been set on the PF_RDS socket,
application pages sent down with rds_sendmsg() are pinned.
The pinning uses the accounting infrastructure added by
Commit a91dbff551 ("sock: ulimit on MSG_ZEROCOPY pages")
The payload bytes in the message may not be modified for the
duration that the message has been pinned. A multi-threaded
application using this infrastructure may thus need to be notified
about send-completion so that it can free/reuse the buffers
passed to rds_sendmsg(). Notification of send-completion will
identify each message-buffer by a cookie that the application
must specify as ancillary data to rds_sendmsg().
The ancillary data in this case has cmsg_level == SOL_RDS
and cmsg_type == RDS_CMSG_ZCOPY_COOKIE.
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
RDS removes a datagram (rds_message) from the retransmit queue when
an ACK is received. The ACK indicates that the receiver has queued
the RDS datagram, so that the sender can safely forget the datagram.
When all references to the rds_message are quiesced, rds_message_purge
is called to release resources used by the rds_message
If the datagram to be removed had pinned pages set up, add
an entry to the rs->rs_znotify_queue so that the notifcation
will be sent up via rds_rm_zerocopy_callback() when the
rds_message is eventually freed by rds_message_purge.
rds_rm_zerocopy_callback() attempts to batch the number of cookies
sent with each notification to a max of SO_EE_ORIGIN_MAX_ZCOOKIES.
This is achieved by checking the tail skb in the sk_error_queue:
if this has room for one more cookie, the cookie from the
current notification is added; else a new skb is added to the
sk_error_queue. Every invocation of rds_rm_zerocopy_callback() will
trigger a ->sk_error_report to notify the application.
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
An rds_connection can get added during netns deletion between lines 528
and 529 of
506 static void rds_tcp_kill_sock(struct net *net)
:
/* code to pull out all the rds_connections that should be destroyed */
:
528 spin_unlock_irq(&rds_tcp_conn_lock);
529 list_for_each_entry_safe(tc, _tc, &tmp_list, t_tcp_node)
530 rds_conn_destroy(tc->t_cpath->cp_conn);
Such an rds_connection would miss out the rds_conn_destroy()
loop (that cancels all pending work) and (if it was scheduled
after netns deletion) could trigger the use-after-free.
A similar race-window exists for the module unload path
in rds_tcp_exit -> rds_tcp_destroy_conns
Concurrency with netns deletion (rds_tcp_kill_sock()) must be handled
by checking check_net() before enqueuing new work or adding new
connections.
Concurrency with module-unload is handled by maintaining a module
specific flag that is set at the start of the module exit function,
and must be checked before enqueuing new work or adding new connections.
This commit refactors existing RDS_DESTROY_PENDING checks added by
commit 3db6e0d172 ("rds: use RCU to synchronize work-enqueue with
connection teardown") and consolidates all the concurrency checks
listed above into the function rds_destroy_pending().
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace c_destroy_in_prog by using a bit in cp_flags that
can set/tested atomically.
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 8edc3affc0 ("rds: tcp: Take explicit refcounts on struct net")
introduces a regression in rds-tcp netns cleanup. The cleanup_net(),
(and thus rds_tcp_dev_event notification) is only called from put_net()
when all netns refcounts go to 0, but this cannot happen if the
rds_connection itself is holding a c_net ref that it expects to
release in rds_tcp_kill_sock.
Instead, the rds_tcp_kill_sock callback should make sure to
tear down state carefully, ensuring that the socket teardown
is only done after all data-structures and workqs that depend
on it are quiesced.
The original motivation for commit 8edc3affc0 ("rds: tcp: Take explicit
refcounts on struct net") was to resolve a race condition reported by
syzkaller where workqs for tx/rx/connect were triggered after the
namespace was deleted. Those worker threads should have been
cancelled/flushed before socket tear-down and indeed,
rds_conn_path_destroy() does try to sequence this by doing
/* cancel cp_send_w */
/* cancel cp_recv_w */
/* flush cp_down_w */
/* free data structures */
Here the "flush cp_down_w" will trigger rds_conn_shutdown and thus
invoke rds_tcp_conn_path_shutdown() to close the tcp socket, so that
we ought to have satisfied the requirement that "socket-close is
done after all other dependent state is quiesced". However,
rds_conn_shutdown has a bug in that it *always* triggers the reconnect
workq (and if connection is successful, we always restart tx/rx
workqs so with the right timing, we risk the race conditions reported
by syzkaller).
Netns deletion is like module teardown- no need to restart a
reconnect in this case. We can use the c_destroy_in_prog bit
to avoid restarting the reconnect.
Fixes: 8edc3affc0 ("rds: tcp: Take explicit refcounts on struct net")
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
RDS over IB does not use multipath RDS, so the array
of additional rds_conn_path structures is always superfluous
in this case. Reduce the memory footprint of the rds module
by making this a dynamic allocation predicated on whether
the transport is mp_capable.
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Tested-by: Efrain Galaviz <efrain.galaviz@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We could end up executing rds_conn_shutdown before the rds_recv_worker
thread, then rds_conn_shutdown -> rds_tcp_conn_shutdown can do a
sock_release and set sock->sk to null, which may interleave in bad
ways with rds_recv_worker, e.g., it could result in:
"BUG: unable to handle kernel NULL pointer dereference at 0000000000000078"
[ffff881769f6fd70] release_sock at ffffffff815f337b
[ffff881769f6fd90] rds_tcp_recv at ffffffffa043c888 [rds_tcp]
[ffff881769f6fdb0] rds_recv_worker at ffffffffa04a4810 [rds]
[ffff881769f6fde0] process_one_work at ffffffff810a14c1
[ffff881769f6fe40] worker_thread at ffffffff810a1940
[ffff881769f6fec0] kthread at ffffffff810a6b1e
Also, do not enqueue any new shutdown workq items when the connection is
shutting down (this may happen for rds-tcp in softirq mode, if a FIN
or CLOSE is received while the modules is in the middle of an unload)
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If we are unloading the rds_tcp module, we can set linger to 1
and drop pending packets to accelerate reconnect. The peer will
end up resetting the connection based on new generation numbers
of the new incarnation, so hanging on to unsent TCP packets via
linger is mostly pointless in this case.
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Tested-by: Jenny Xu <jenny.x.xu@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The RDS handshake ping probe added by commit 5916e2c155
("RDS: TCP: Enable multipath RDS for TCP") is sent from rds_sendmsg()
before the first data packet is sent to a peer. If the conversation
is not bidirectional (i.e., one side is always passive and never
invokes rds_sendmsg()) and the passive side restarts its rds_tcp
module, a new HS ping probe needs to be sent, so that the number
of paths can be re-established.
This patch achieves that by sending a HS ping probe from
rds_tcp_accept_one() when c_npaths is 0 (i.e., we have not done
a handshake probe with this peer yet).
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Tested-by: Jenny Xu <jenny.x.xu@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Found when testing between sparc and x86 machines on different
subnets, so the address comparison patterns hit the corner cases and
brought out some bugs fixed by this patch.
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Tested-by: Imanti Mendez <imanti.mendez@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After commit 1a0e100fb2 ("RDS: TCP: Force every connection to be
initiated by numerically smaller IP address") we no longer need
the logic associated with cp_outgoing, so clean up usage of this
field.
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Tested-by: Imanti Mendez <imanti.mendez@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It is incorrect for the rds_connection to piggyback on the
sock_net() refcount for the netns because this gives rise to
a chicken-and-egg problem during rds_conn_destroy. Instead explicitly
take a ref on the net, and hold the netns down till the connection
tear-down is complete.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from David Miller:
1) Fix double-free in batman-adv, from Sven Eckelmann.
2) Fix packet stats for fast-RX path, from Joannes Berg.
3) Netfilter's ip_route_me_harder() doesn't handle request sockets
properly, fix from Florian Westphal.
4) Fix sendmsg deadlock in rxrpc, from David Howells.
5) Add missing RCU locking to transport hashtable scan, from Xin Long.
6) Fix potential packet loss in mlxsw driver, from Ido Schimmel.
7) Fix race in NAPI handling between poll handlers and busy polling,
from Eric Dumazet.
8) TX path in vxlan and geneve need proper RCU locking, from Jakub
Kicinski.
9) SYN processing in DCCP and TCP need to disable BH, from Eric
Dumazet.
10) Properly handle net_enable_timestamp() being invoked from IRQ
context, also from Eric Dumazet.
11) Fix crash on device-tree systems in xgene driver, from Alban Bedel.
12) Do not call sk_free() on a locked socket, from Arnaldo Carvalho de
Melo.
13) Fix use-after-free in netvsc driver, from Dexuan Cui.
14) Fix max MTU setting in bonding driver, from WANG Cong.
15) xen-netback hash table can be allocated from softirq context, so use
GFP_ATOMIC. From Anoob Soman.
16) Fix MAC address change bug in bgmac driver, from Hari Vyas.
17) strparser needs to destroy strp_wq on module exit, from WANG Cong.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (69 commits)
strparser: destroy workqueue on module exit
sfc: fix IPID endianness in TSOv2
sfc: avoid max() in array size
rds: remove unnecessary returned value check
rxrpc: Fix potential NULL-pointer exception
nfp: correct DMA direction in XDP DMA sync
nfp: don't tell FW about the reserved buffer space
net: ethernet: bgmac: mac address change bug
net: ethernet: bgmac: init sequence bug
xen-netback: don't vfree() queues under spinlock
xen-netback: keep a local pointer for vif in backend_disconnect()
netfilter: nf_tables: don't call nfnetlink_set_err() if nfnetlink_send() fails
netfilter: nft_set_rbtree: incorrect assumption on lower interval lookups
netfilter: nf_conntrack_sip: fix wrong memory initialisation
can: flexcan: fix typo in comment
can: usb_8dev: Fix memory leak of priv->cmd_msg_buffer
can: gs_usb: fix coding style
can: gs_usb: Don't use stack memory for USB transfers
ixgbe: Limit use of 2K buffers on architectures with 256B or larger cache lines
ixgbe: update the rss key on h/w, when ethtool ask for it
...
The function rds_trans_register always returns 0. As such, it is not
necessary to check the returned value.
Cc: Joe Jin <joe.jin@oracle.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull vfs sendmsg updates from Al Viro:
"More sendmsg work.
This is a fairly separate isolated stuff (there's a continuation
around lustre, but that one was too late to soak in -next), thus the
separate pull request"
* 'work.sendmsg' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
ncpfs: switch to sock_sendmsg()
ncpfs: don't mess with manually advancing iovec on send
ncpfs: sendmsg does *not* bugger iovec these days
ceph_tcp_sendpage(): use ITER_BVEC sendmsg
afs_send_pages(): use ITER_BVEC
rds: remove dead code
ceph: switch to sock_recvmsg()
usbip_recv(): switch to sock_recvmsg()
iscsi_target: deal with short writes on the tx side
[nbd] pass iov_iter to nbd_xmit()
[nbd] switch sock_xmit() to sock_{send,recv}msg()
[drbd] use sock_sendmsg()
Socket option to tap receive path latency in various stages
in nano seconds. It can be enabled on selective sockets using
using SO_RDS_MSG_RXPATH_LATENCY socket option. RDS will return
the data to application with RDS_CMSG_RXPATH_LATENCY in defined
format. Scope is left to add more trace points for future
without need of change in the interface.
Reviewed-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
RDS support max message size as 1M but the code doesn't check this
in all cases. Patch fixes it for RDMA & non-RDMA and RDS MR size
and its enforced irrespective of underlying transport.
Signed-off-by: Avinash Repaka <avinash.repaka@oracle.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Tracks the receive side memory added to scokets and removed from sockets.
Signed-off-by: Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
When application sends an RDS RDMA composite message consist of
RDMA transfer to be followed up by non RDMA payload, it expect to
be notified *only* when the full message gets delivered. RDS RDMA
notification doesn't behave this way though.
Thanks to Venkat for debug and root casuing the issue
where only first part of the message(RDMA) was
successfully delivered but remainder payload delivery failed.
In that case, application should not be notified with
a false positive of message delivery success.
Fix this case by making sure the user gets notified only after
the full message delivery.
Reviewed-by: Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
The RDS transport has to be able to distinguish between
two types of failure events:
(a) when the transport fails (e.g., TCP connection reset)
but the RDS socket/connection layer on both sides stays
the same
(b) when the peer's RDS layer itself resets (e.g., due to module
reload or machine reboot at the peer)
In case (a) both sides must reconnect and continue the RDS messaging
without any message loss or disruption to the message sequence numbers,
and this is achieved by rds_send_path_reset().
In case (b) we should reset all rds_connection state to the
new incarnation of the peer. Examples of state that needs to
be reset are next expected rx sequence number from, or messages to be
retransmitted to, the new incarnation of the peer.
To achieve this, the RDS handshake probe added as part of
commit 5916e2c155 ("RDS: TCP: Enable multipath RDS for TCP")
is enhanced so that sender and receiver of the RDS ping-probe
will add a generation number as part of the RDS_EXTHDR_GEN_NUM
extension header. Each peer stores local and remote generation
numbers as part of each rds_connection. Changes in generation
number will be detected via incoming handshake probe ping
request or response and will allow the receiver to reset rds_connection
state.
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
