Commit Graph

1603 Commits

Author SHA1 Message Date
Jamie Lentin
f4a00139b7 ARM: kirkwood: Increase NAND chip-delay for DNS-32[05]
The default chip-delay of 25us is a bit too tight for some DNS-320's,
and D-Link seem to specify 30us in their kernels for both devices.
Increase to 35us to make sure the NAND is stable.

Signed-off-by: Jamie Lentin <jm@lentin.co.uk>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-11-24 02:54:00 +00:00
Andrew Lunn
b6cf80704d ARM: Kirkwood: Convert all DT boards to EHCI via DT.
Now that the EHCI driver has DT support, drop old style configuration
of it and add DT in its place. Since all the boards enable the EHCI,
enable it by default in kirkwood.dtsi. Any new boards which don't have
USB can specifically disable it.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-11-24 02:53:37 +00:00
Dave Martin
5010192d5a ARM: 7583/1: decompressor: Enable unaligned memory access for v6 and above
Modern GCC can generate code which makes use of the CPU's native
unaligned memory access capabilities.  This is useful for the C
decompressor implementations used for unpacking compressed kernels.

This patch disables alignment faults and enables the v6 unaligned
access model on CPUs which support these features (i.e., v6 and
later), allowing full unaligned access support for C code in the
decompressor.

The decompressor C code must not be built to assume that unaligned
access works if support for v5 or older platforms is included in
the kernel.

For correct code generation, C decompressor code must always use
the get_unaligned and put_unaligned accessors when dealing with
unaligned pointers, regardless of this patch.

Signed-off-by: Dave Martin <dave.martin@linaro.org>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-11-23 13:02:03 +00:00
Thomas Petazzoni
1112b36094 SMP support for Armada XP
The purpose of this series is to add the SMP support for the Armada XP
 SoCs. Beside the SMP support itself brought by the last 3 commits,
 this series also adds the support for the coherency fabric unit and
 the power management service unit.
 
 The coherency fabric is responsible for ensuring hardware coherency
 between all CPUs and between CPUs and I/O masters. This unit is also
 available for Armada 370 and will be used in an incoming patch set
 for hardware I/O cache coherency.
 
 The power management service unit is responsible for powering down and
 waking up CPUs and other SOC units.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iEYEABECAAYFAlCs+5oACgkQCwYYjhRyO9UywACfVp3WPDHLxE8ypew3AWoTyxe3
 JcMAoIjojnjWCd44cqDJ4uEpvi6KNquE
 =BR8m
 -----END PGP SIGNATURE-----

Merge tag 'marvell-armadaxp-smp-for-3.8' of github.com:MISL-EBU-System-SW/mainline-public into mevbu-dt-additions

SMP support for Armada XP

The purpose of this series is to add the SMP support for the Armada XP
SoCs. Beside the SMP support itself brought by the last 3 commits,
this series also adds the support for the coherency fabric unit and
the power management service unit.

The coherency fabric is responsible for ensuring hardware coherency
between all CPUs and between CPUs and I/O masters. This unit is also
available for Armada 370 and will be used in an incoming patch set
for hardware I/O cache coherency.

The power management service unit is responsible for powering down and
waking up CPUs and other SOC units.

Conflicts:
	arch/arm/mach-mvebu/armada-370-xp.c
2012-11-22 10:55:09 +01:00
Thomas Petazzoni
a79cfde1b1 Merge branch 'for-jason-1/cleanup' into mevbu-dt-additions 2012-11-22 10:50:55 +01:00
Sascha Hauer
33b3858732 ARM i.MX6: Add pwm support
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-22 09:16:43 +01:00
Sascha Hauer
82a618da1b ARM i.MX51: Add pwm support
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-22 09:16:25 +01:00
Sascha Hauer
9ae90afaeb ARM i.MX53: Add pwm support
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-22 09:15:48 +01:00
Fabio Estevam
f40f38d1dc ARM: mx5: Replace clk_register_clkdev with clock DT lookup
Similarly as it was done for mx6q, use a DT lookup in order to make maintainance
task for the clock devices easier.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-11-22 09:15:26 +01:00
Nobuhiro Iwamatsu
f17073a3ae ARM: kirkwood: Add Plat'Home OpenBlocks A6 support
Add support for Plat'Home OpenBlocks A6 using the device tree
where possible.
This commit supports SATA, USB, ether and serial console.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-11-22 07:01:51 +00:00
Thomas Abraham
b1ce101bb9 ARM: dts: Add pin controller node for Samsung EXYNOS5440 SoC
Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-11-22 13:50:14 +09:00
Kukjin Kim
1355bbc480 ARM: dts: add initial dts file for EXYNOS5440, SSDK5440
This patch adds initial dts file for EXYNOS5440 SoC and adds the
dts file for SSDK5440 board which is a kind of reference board.
More properties will be added later.

Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-11-22 13:42:49 +09:00
Jason Cooper
4e76b1b232 Marvell SATA and I2C enabling for OpenBlocks AX3-4
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iEYEABECAAYFAlCtU90ACgkQ9lPLMJjT96dSdQCfcmuU/3oXziktW6coEOwWD0rZ
 rpAAoITtWPO7RNRqhCVQGFJKuuy5sid7
 =ME0a
 -----END PGP SIGNATURE-----

Merge tag 'marvell-openblocks-i2c-sata-for-3.8' of git://github.com/MISL-EBU-System-SW/mainline-public into mvebu/everything

Marvell SATA and I2C enabling for OpenBlocks AX3-4
2012-11-22 03:28:05 +00:00
Maxime Ripard
25d6dd859e ARM: dts: mxs: add oled support for the cfa-10036
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Brian Lilly <brian@crystalfontz.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-22 09:03:40 +08:00
Thomas Petazzoni
6435389dde ARM: mvebu: Add SATA support for OpenBlocks AX3-4
This patch enables SATA support on the OpenBlocks AX3-4. It has one
internal SATA port, and an external eSATA port.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2012-11-21 23:20:35 +01:00
Nobuhiro Iwamatsu
14bedd4afb ARM: mvebu: Add support for the RTC in OpenBlocks AX3-4
The OpenBlocks AX3-4 has a Seiko Instruments S-35390A as the RTC
controller.  This patch enables this RTC device in the OpenBlocks
AX3-4 Device Tree.

[Thomas Petazzoni: updated with other OpenBlocks changes, rephrased
commit log.]
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2012-11-21 23:19:39 +01:00
Nobuhiro Iwamatsu
9eab21cffc ARM: mvebu: Add support for I2C on OpenBlocks AX3-4
The OpenBlocks AX3-4 board, based on the Armada XP SoC, has an I2C
bus. This patch enables this bus and sets the clock frequency of the
bus.

[Thomas Petazzoni: updated with other changes on OpenBlocks, rephrased
commit log.]
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2012-11-21 23:18:43 +01:00
Nobuhiro Iwamatsu
539eb5bca0 ARM: mvebu: Add support for I2C controllers in Armada 370/XP
The Armada 370 and Armada XP have the same I2C controllers as previous
Marvell SoCs, so the existing mv64xxx-i2c driver works fine.

[Thomas Petazzoni: updated on top of other Armada 370/XP changes,
rephrased the commit log].
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2012-11-21 23:17:34 +01:00
Thomas Petazzoni
07f645df9f arm: orion5x: convert 'LaCie Ethernet Disk mini v2' to Device Tree
This commit converts the 'LaCie Ethernet Disk mini v2' board to the
Device Tree. All devices that have existing Device Tree bindings are
converted over to the Device Tree, the other devices remain
instantiated in the old way, until the respective drivers get the
needed Device Tree bindings.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested by: Maxime Hadjinlian <mhadjinlian@lacie.com>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-11-21 21:00:51 +00:00
Thomas Petazzoni
1bffb4a872 arm: orion5x: basic Device Tree support
This commit adds basic DT support for the Orion5x SoC family. It adds
an orion5x.dtsi description of the Orion5x SoC as well as the needed
DT_MACHINE structure to support boards converted to DT in the future.

So far, the Device Tree contains the interrupt controller, the GPIO
bank, the UART controllers, the SPI controller, the watchdog, the SATA
controller, the I2C controller and the cryptographic engine.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested by: Maxime Hadjinlian <mhadjinlian@lacie.com>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-11-21 21:00:45 +00:00
Stefan Peter
5492a1108b ARM: kirkwood: Add support for the MPL CEC4
Signed-off-by: Stefan Peter <s.peter@mpl.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-11-21 21:00:23 +00:00
Tero Jaasko
afcad88425 arm: kirkwood: add support for ZyXEL NSA310
Hello, Andrew

> > +#define NSA310_GPIO_LED_ESATA_GREEN	12
> > <..>
> > +#define NSA310_GPIO_POWER_OFF		48
>
> It looks like most of these are not used. Please remove them.

True. Fixed.

> > +static struct mtd_partition nsa310_mtd_parts[] = {
> > +	{
> > +		.name	= "uboot",
> > +		.offset	= 0,
> > +		.size	= 0x100000,
> > +		.mask_flags = MTD_WRITEABLE,
> > +	}, {
> > <..>
> You should be able to put all that into DT. Take a look at

Correct. I did the conversion and tested that the partitions
can be read with dd and produce exactly the same data before and
after conversion. So, the partition offsets at least should be fine.

> > +static struct i2c_board_info __initdata nsa310_i2c_info[] = {
> > +	{ I2C_BOARD_INFO("adt7476", 0x2e) },
> > +};
>
> You can also do this in DT as well. kirkwood-ts219.dtsi has
>
>                 i2c@11000 {
>                         status = "okay";
>                         clock-frequency = <400000>;

Ok, I did convert the i2c definition to use the devicetree.
The adt7476 device itself is not at reach of device tree,
AFAIK and requires more work at there?

Thanks for your valuable comments. Following is a new patch that
should address the problems and mistakes you pointed and also
some of the pointed by Jason Cooper. The nand and i2c are now
defined at DT and I also removed the pointless defines and
ARM_APPENDED_DTB. It is based against the Linus' official
3.6 version.

Best regards,
Tero

Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-11-21 20:59:30 +00:00
Jason Cooper
767fc1ea92 ARM: Kirkwood: new board USI Topkick
This is a new kirkwood box made by Universal Scientific Industrial, Inc.
The product description is here:

http://www.usish.com/english/products_topkick1281p2.php

It is very similar to the dreamplug and other plug devices, with the
exception that it has room for a 2.5" SATA HDD internally.

Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2012-11-21 20:59:22 +00:00
Michael Walle
b046f560d7 ARM: kirkwood: use gpio-fan DT binding on lsxl
Remove board specific gpio-fan driver registration. Moved into device tree.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-11-21 20:59:05 +00:00
Simon Guinot
7f9871d9d3 ARM: kirkwood: DT board setup for Network Space Mini v2
This patch adds DT board setup for the LaCie NAS Network Space Mini v2
(aka SafeBox). The hardware characteristics are very close to those of
the Network Space Lite v2. The main difference are:
- A GPIO fan which is only available on the NS2 Mini.
- A single USB host port is wired on the NS2 Mini. The NS2 Lite provides
  an additional dual-mode USB port (host/device).

Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-11-21 20:58:49 +00:00
Simon Guinot
ca7d94524a ARM: kirkwood: DT board setup for Network Space Lite v2
This patch adds DT board setup for the LaCie NAS Network Space Lite v2.
This board is derived from the Network Space v2 and a lot of hardware
characteristics are shared.

- CPU: Marvell 88F6192 800Mhz
- SDRAM memory: 128MB DDR2 200Mhz
- 1 SATA port: internal
- Gigabit ethernet: PHY Marvell 88E1318
- Flash memory: SPI NOR 512KB (Macronix MX25L4005A)
- i2c EEPROM: 512 bytes (24C04 type)
- 2 USB2 ports: host and host/device
- 1 push button
- 1 SATA LED (bi-color, blue and red)

Note that the SATA LED is not compatible with the driver leds-ns2. The
LED behaviour ("on", "off" or "SATA activity blink") is controlled via
a single MPP (21).

Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-11-21 20:58:43 +00:00
Simon Guinot
ecee1e47ab ARM: kirkwood: DT board setup for Network Space v2 and parents
This patch adds DT board setup for LaCie Network Space v2 and parents,
based on the Marvell Kirkwood 6281 SoC. This includes Network Space v2
(Max) and Internet Space v2.

Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-11-21 20:58:35 +00:00
Jason Cooper
32d6448a08 Add hardware I/O coherency support for Armada 370/XP
The purpose of this patch set is to add hardware I/O Coherency support
 for Armada 370 and Armada XP. Theses SoCs come with an unit called
 coherency fabric. A beginning of the support for this unit have been
 introduced with the SMP patch set. This series extend this support:
 the coherency fabric unit allows to use the Armada XP and the Armada
 370 as nearly coherent architectures.
 
 The third patches enables this new feature and register our own set
 of DMA ops, to benefit this hardware enhancement.
 
 The first patches exports a dma operation function needed to register
 our own set of dma ops.
 
 The second patch introduces a new flag for the address decoding
 configuration in order to be able to set the memory windows as
 shared memory.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iEYEABECAAYFAlCs/LcACgkQCwYYjhRyO9WrOgCfeWpA9XdQnwexySw5tPXS7Qdp
 aJEAn2ql07SECpTRWezTJptHL0oI1dFF
 =b0T7
 -----END PGP SIGNATURE-----

Merge tag 'marvell-hwiocc-for-3.8' of git://github.com/MISL-EBU-System-SW/mainline-public into mvebu/everything

Add hardware I/O coherency support for Armada 370/XP

The purpose of this patch set is to add hardware I/O Coherency support
for Armada 370 and Armada XP. Theses SoCs come with an unit called
coherency fabric. A beginning of the support for this unit have been
introduced with the SMP patch set. This series extend this support:
the coherency fabric unit allows to use the Armada XP and the Armada
370 as nearly coherent architectures.

The third patches enables this new feature and register our own set
of DMA ops, to benefit this hardware enhancement.

The first patches exports a dma operation function needed to register
our own set of dma ops.

The second patch introduces a new flag for the address decoding
configuration in order to be able to set the memory windows as
shared memory.
2012-11-21 20:02:46 +00:00
Jason Cooper
86b7d3f779 SMP support for Armada XP
The purpose of this series is to add the SMP support for the Armada XP
 SoCs. Beside the SMP support itself brought by the last 3 commits,
 this series also adds the support for the coherency fabric unit and
 the power management service unit.
 
 The coherency fabric is responsible for ensuring hardware coherency
 between all CPUs and between CPUs and I/O masters. This unit is also
 available for Armada 370 and will be used in an incoming patch set
 for hardware I/O cache coherency.
 
 The power management service unit is responsible for powering down and
 waking up CPUs and other SOC units.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iEYEABECAAYFAlCs+5oACgkQCwYYjhRyO9UywACfVp3WPDHLxE8ypew3AWoTyxe3
 JcMAoIjojnjWCd44cqDJ4uEpvi6KNquE
 =BR8m
 -----END PGP SIGNATURE-----

Merge tag 'marvell-armadaxp-smp-for-3.8' of git://github.com/MISL-EBU-System-SW/mainline-public into mvebu/everything

SMP support for Armada XP

The purpose of this series is to add the SMP support for the Armada XP
SoCs. Beside the SMP support itself brought by the last 3 commits,
this series also adds the support for the coherency fabric unit and
the power management service unit.

The coherency fabric is responsible for ensuring hardware coherency
between all CPUs and between CPUs and I/O masters. This unit is also
available for Armada 370 and will be used in an incoming patch set
for hardware I/O cache coherency.

The power management service unit is responsible for powering down and
waking up CPUs and other SOC units.
2012-11-21 20:01:15 +00:00
Jason Cooper
98d8df630d Marvell XOR driver DT changes for 3.8
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iEYEABECAAYFAlCsAhAACgkQ9lPLMJjT96dSzQCgoJwqNxCWQPYFgi1XgxYDYaOM
 A10An1l0h8WMAgy/eDBlyWOjA8FD8Ekx
 =xq4r
 -----END PGP SIGNATURE-----

Merge tag 'marvell-xor-board-dt-changes-3.8-v2' of git://github.com/MISL-EBU-System-SW/mainline-public into mvebu/everything

Marvell XOR driver DT changes for 3.8

Conflicts:
	arch/arm/boot/dts/armada-xp.dtsi
2012-11-21 19:57:23 +00:00
Olof Johansson
3f54db784a Merge branch 'zynq/multiplatform' of git://git.monstr.eu/linux-2.6-microblaze into next/multiplatform
From Michal Simek:

This branch depends on arm-soc devel/debug_ll_init branch because
we needed Rob's "ARM: implement debug_ll_io_init()"
(sha1: afaee03511ba8002b26a9c6b1fe7d6baf33eac86)
patch.

This branch also depends on zynq/dt branch because of previous major
zynq changes.
zynq/cleanup branch is subset of zynq/dt.

* 'zynq/multiplatform' of git://git.monstr.eu/linux-2.6-microblaze:
  ARM: zynq: Remove all unused mach headers
  ARM: zynq: add support for ARCH_MULTIPLATFORM
  ARM: zynq: make use of debug_ll_io_init()
  ARM: zynq: remove TTC early mapping
  ARM: zynq: add clk binding support to the ttc
  ARM: zynq: use zynq clk bindings
  clk: Add support for fundamental zynq clks
  ARM: zynq: dts: split up device tree
  ARM: zynq: Allow UART1 to be used as DEBUG_LL console.
  ARM: zynq: dts: add description of the second uart
  ARM: zynq: move arm-specific sys_timer out of ttc
  zynq: move static peripheral mappings
  zynq: remove use of CLKDEV_LOOKUP
  zynq: use pl310 device tree bindings
  zynq: use GIC device tree bindings

Add/add conflict in arch/arm/Kconfig.debug.

Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-21 11:49:45 -08:00
Olof Johansson
24025f6f58 Merge branch 'next/dt-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt
From Kukjin Kim:

Here is Samsung DT for v3.8 and this is including DT for EXYNOS4X12
SoC, SMDK4412 board, pinctrl for exynos4x12, TMU, MFC, SATA and SATA
PHY.

As I commented on [4/7], this branch merged pinctrl/samsung to support
pinctrl for exynos4x12 without useless merge conflicts.

* 'next/dt-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: (32 commits)
  ARM: EXYNOS: DT Support for SATA and SATA PHY
  ARM: dts: Remove broken-voltage property from sdhci node for exynos4210-trats
  ARM: dts: Add node for touchscreen for exynos4210-trats
  ARM: dts: Add node for touchscreen voltage regulator for exynos4210-trats
  ARM: dts: Add node for i2c3 bus for exynos4210-trats
  ARM: dts: Add nodes for GPIO keys available on Trats
  ARM: dts: Update for pinctrl-samsung driver for exynos4210-trats
  ARM: dts: Add nodes for pin controllers for exynos4x12
  pinctrl: samsung: Add support for EXYNOS4X12
  gpio: samsung: Skip registration if pinctrl driver is present on EXYNOS4X12
  ARM: EXYNOS: Skip wakeup-int setup if pinctrl driver is used on EXYNOS4X12
  ARM: dts: add board dts file for EXYNOS4412 based SMDK board
  ARM: dts: Add support for EXYNOS4X12 SoCs
  ARM: EXYNOS: Add devicetree node for TMU driver for exynos5
  ARM: EXYNOS: Add devicetree node for TMU driver for exynos4
  ARM: EXYNOS: Add MFC device tree support
  ARM: dts: Enable serial controllers on Origen and SMDKV310
  Documentation: Update samsung-pinctrl device tree bindings documentation
  pinctrl: samsung: Add GPIO to IRQ translation
  pinctrl: exynos: Set pin function to EINT in irq_set_type of wake-up EINT
  ...

Add/add conflicts in:
	arch/arm/boot/dts/exynos5250-smdk5250.dts
	arch/arm/boot/dts/exynos5250.dtsi
	arch/arm/mach-exynos/mach-exynos5-dt.c

Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-21 11:30:32 -08:00
Olof Johansson
e9f6d13513 Merge branch 'sunxi/soc2' into next/soc
From Maxime Ripard:

Here is a pull request to add the support for Allwinner A10 SoCs.

* sunxi/soc2:
  ARM: sunxi: Add sunxi restart function via onchip watchdog
  ARM: sunxi: Add sun4i and cubieboard support
  ARM: sunxi: Add earlyprintk support for UART0 (sun4i)
  ARM: sunxi: Restructure sunxi dts/dtsi files

Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-21 10:52:44 -08:00
Olof Johansson
1f1ba83645 Merge branch 'next/devel-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/soc2
From Kukjin Kim:

This includes supporting legacy i2c controller and ARM down clock
support for exynos5 and small changes.

[olof: It contains a dependency on samsung/hdmi for HDMI DT bindings, for some reason.]

* 'next/devel-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: EXYNOS: Clock settings for SATA and SATA PHY
  ARM: EXYNOS: Add ARM down clock support
  ARM: EXYNOS: Fix i2c suspend/resume for legacy controller
  ARM: EXYNOS: Add aliases for i2c controller
  ARM: EXYNOS: Setup legacy i2c controller interrupts
  ARM: EXYNOS: removing exynos-drm device registration from non-dt platforms
  ARM: EXYNOS: add clocks for exynos5 hdmi
  ARM: dts: add device tree support for exynos5 hdmiddc
  ARM: dts: add device tree support for exynos5 hdmiphy
  ARM: dts: add device tree support for exynos5 mixer
  ARM: dts: add device tree support for exynos5 hdmi
  ARM: EXYNOS: Add dp clock support for EXYNOS5
  ARM: SAMSUNG: call clk_get_rate for debugfs rate files
  ARM: SAMSUNG: add clock_tree debugfs file in clock

Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-21 10:24:59 -08:00
Olof Johansson
41739b60b3 Merge branch 'samsung/pinctrl' into next/soc
From Kukjin Kim:
Here is Samsung DT for v3.8 and this is including DT for EXYNOS4X12
SoC, SMDK4412 board, pinctrl for exynos4x12, TMU, MFC, SATA and SATA
PHY.

As I commented on [4/7], this branch merged pinctrl/samsung to support
pinctrl for exynos4x12 without useless merge conflicts.

* samsung/pinctrl:
  pinctrl: samsung: Update error check for unsigned variables
  pinctrl: samsung: Add support for EXYNOS4X12
  Documentation: Update samsung-pinctrl device tree bindings documentation
  pinctrl: samsung: Add GPIO to IRQ translation
  pinctrl: exynos: Set pin function to EINT in irq_set_type of wake-up EINT
  pinctrl: samsung: Use per-bank IRQ domain for wake-up interrupts
  pinctrl: samsung: Use one GPIO chip per pin bank
  pinctrl: exynos: Use one IRQ domain per pin bank
  pinctrl: samsung: Include bank-specific eint offset in bank struct
  pinctrl: samsung: Hold pointer to driver data in bank struct
  pinctrl: samsung: Match pin banks with their device nodes
  ARM: dts: exynos4210-pinctrl: Add nodes for pin banks
  pinctrl: samsung: Distinguish between pin group and bank nodes
  pinctrl: samsung: Remove static pin enumerations
  pinctrl: samsung: Assing pin numbers dynamically
  pinctrl: samsung: Do not pass gpio_chip to pin_to_reg_bank
  pinctrl: samsung: Detect and handle unsupported configuration types
2012-11-21 10:18:54 -08:00
Olof Johansson
e642779b49 Merge branch 'next/hdmi-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt
From Kukjin Kim:
This is for adding support for DT based exynos5250 hdmi and it adds
device node for hdmi, mixer, hdmiphy and hdmiddc.

* 'next/hdmi-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: EXYNOS: removing exynos-drm device registration from non-dt platforms
  ARM: EXYNOS: add clocks for exynos5 hdmi
  ARM: dts: add device tree support for exynos5 hdmiddc
  ARM: dts: add device tree support for exynos5 hdmiphy
  ARM: dts: add device tree support for exynos5 mixer
  ARM: dts: add device tree support for exynos5 hdmi
2012-11-21 10:11:58 -08:00
Olof Johansson
24e93941f2 Merge branch 'clps711x/soc2' into next/soc
From Alexander Shiyan:

The main direction of this patchset - approaching the platform to the
possibility of using configurations with multiple platforms in a single
kernel. Added support of the majority of the necessary kernel symbol.
Also part of the driver code used only for the platform was moved to the
board code and converted to the use of standard drivers.

* clps711x/soc2:
  MAINTAINERS: Add ARM CLPS711X entry
  ARM: clps711x: Update defconfig due latest changes and new kernel symbols
  ARM: clps711x: Rename board files to match functionality
  ARM: clps711x: edb7211: Add support for NOR-Flash
  ARM: clps711x: Moving backlight controls of framebuffer driver to the board
  ARM: clps711x: p720t: Special driver for handling NAND memory is removed
  ARM: clps711x: Moving power management of framebuffer driver to the board
  ARM: clps711x: autcpu12: Special driver for handling NAND memory is removed
  ARM: clps711x: Unused empty "ACK" calls for IRQ-chips removed
  ARM: clps711x: Add FIQ interrupt handling
  ARM: clps711x: Implement usage "MULTI_IRQ_HANDLER" kernel option for a platform
  ARM: clps711x: Implement usage "SPARSE_IRQ" kernel option for a platform
  ARM: clps711x: cdb89712: Special driver for handling memory is removed
  ARM: clps711x: Always select AUTO_ZRELADDR for a platform
  ARM: clps711x: p720t: Unneeded inclusion of head-sa1100.S removed
  ARM: clps711x: Transform clps711x-framebuffer to platform driver and use it
  ARM: clps711x: p720t: Using "leds-gpio" driver for LED control
  ARM: clps711x: Using platform_driver for ethernet device
2012-11-21 09:58:28 -08:00
Gregory CLEMENT
e60304f8cb arm: mvebu: Add hardware I/O Coherency support
Armada 370 and XP come with an unit called coherency fabric. This unit
allows to use the Armada 370/XP as a nearly coherent architecture. The
coherency mechanism uses snoop filters to ensure the coherency between
caches, DRAM and devices. This mechanism needs a synchronization
barrier which guarantees that all the memory writes initiated by the
devices have reached their target and do not reside in intermediate
write buffers. That's why the architecture is not totally coherent and
we need to provide our own functions for some DMA operations.

Beside the use of the coherency fabric, the device units will have to
set the attribute flag of the decoding address window to select the
accurate coherency process for the memory transaction. This is done
each device driver programs the DRAM address windows. The value of the
attribute set by the driver is retrieved through the
orion_addr_map_cfg struct filled during the early initialization of
the platform.

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Reviewed-by: Yehuda Yitschak <yehuday@marvell.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
2012-11-21 17:07:49 +01:00
Gregory CLEMENT
344e873e56 arm: mvebu: Add IPI support via doorbells
This patch enhances the IRQ controller driver to add support for
Inter-Processor-Interrupts that are needed to enable SMP support.

Signed-off-by: Yehuda Yitschak <yehuday@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2012-11-21 16:49:37 +01:00
Gregory CLEMENT
7444dad240 arm: mvebu: Add initial support for power managmement service unit
The Armada 370 and Armada XP SOCs have a power management service unit
which is responsible for powering down and waking up CPUs and other
SOC units. This patch adds support for this unit.

Signed-off-by: Yehuda Yitschak <yehuday@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2012-11-21 16:49:36 +01:00
Gregory CLEMENT
009f13159b arm: mvebu: Add support for coherency fabric in mach-mvebu
The Armada 370 and Armada XP SOCs have a coherency fabric unit which
is responsible for ensuring hardware coherency between all CPUs and
between CPUs and I/O masters. This patch provides the basic support
needed for SMP.

Signed-off-by: Yehuda Yitschak <yehuday@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
2012-11-21 16:49:06 +01:00
Tomasz Figa
d80162eccd ARM: dts: Use drive strength 3 for SD pins for exynos4
This patch modifies pin control groups of SD pins on EXYNOS4210
and EXYNOS4X12 to use drive strength 3 as a default value which
corresponds to S5P_GPIO_DRVSTR_LV4 in legacy non-DT code.

This is needed at least on Origen board for sdhci2 to work and
if any other drive strength is required on each board, we can
overide it.

Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
[kgene.kim@samsung.com: edited commit message]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-11-22 00:39:01 +09:00
Tomasz Figa
91d88f038e ARM: dts: Set up power domains for exynos4
This patch adds device tree nodes for power domains available
on EXYNOS4 SoCs.

Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-11-22 00:39:00 +09:00
Tomasz Figa
cf7c397b62 ARM: dts: Add vmmc fixed voltage regulator for exynos4210-origen
This patch adds fixed voltage vmmc regulator to dts file of Origen
board.

Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-11-22 00:38:56 +09:00
Tomasz Figa
6475daad9a ARM: dts: Update sdhci nodes for current bindings for exynos4210-origen
This patch modifies sdhci nodes present in Origen device tree source
to use current generic mmc bindings.

Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-11-22 00:38:55 +09:00
Tomasz Figa
41d8bdf67c ARM: dts: Update for pinctrl-samsung driver for exynos4210-origen
This patch updates all parts of Origen dts related to pin configuration
to use new GPIO and pinctrl bindings, instead of (now unsupported on
Exynos4) legacy gpio-samsung bindings.

Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-11-22 00:38:53 +09:00
Tomasz Figa
49ed67a42d ARM: dts: Split memory sections for exynos4210-origen
This patch changes memory configuration defined in dts file of Origen
board from single 1 GiB section into four 256 MiB sections to match
section size limit.

Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-11-22 00:38:52 +09:00
Doug Anderson
34db4990e0 ARM: dts: Add aliases for i2c controller for exynos4
This is similar to a recent commit for exynos5250 titled:
  ARM: EXYNOS: Add aliases for i2c controller

Adding aliases will be useful to prevent warnings in a future
change. See:
  i2c: s3c2410: Get the i2c bus number from alias id

Signed-off-by: Doug Anderson <dianders@chromium.org>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-11-22 00:38:37 +09:00
Olof Johansson
06f31cb0f6 Merge branch 'vexpress-clk-soc' of git://git.linaro.org/people/pawelmoll/linux into next/soc
From Pawel Moll:
* 'vexpress-clk-soc' of git://git.linaro.org/people/pawelmoll/linux:
  ARM: vexpress: Remove motherboard dependencies in the DTS files
  ARM: vexpress: Start using new Versatile Express infrastructure
  ARM: vexpress: Add config bus components and clocks to DTs
  mfd: Versatile Express system registers driver
  mfd: Versatile Express config infrastructure
2012-11-21 02:13:11 -08:00
Olof Johansson
ea091f6dbd Merge tag 'bcm2835-for-3.8-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-rpi into next/soc
From Stephen Warren:
ARM: bcm2835: core SoC enhancements

A machine restart/reboot implementation is added. The GPIO/pinmux
controller is instantiated, and dummy gpio.h added.

* tag 'bcm2835-for-3.8-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-rpi:
  ARM: bcm2835: enable GPIO/pinctrl
  ARM: bcm2835: implement machine restart hook

Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-21 02:13:09 -08:00
Olof Johansson
5e505bb9e7 Merge tag 'tegra-for-3.8-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/soc
From Stephen Warren:
ARM: tegra: core SoC code enhancements

Various small clock initialization table and driver changes to support
WiFi modules, SPI controllers, and host1x (graphics/display hardware).

Various AHB/APB-related clocks were added to the Tegra30 clock driver.

The level 2 cache initialization is now driven by data from device tree,
and the cache configuration tweaked.

AUXDATA is added to support SPI controllers and host1x.

Code to decode Tegra's "speedo" process identification fuses is added.

This pull request is based on tegra-for-3.8-cleanup.

* tag 'tegra-for-3.8-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra: (26 commits)
  ARM: tegra: Add Tegra30 host1x clock support
  ARM: tegra: Add AUXDATA for Tegra30 host1x
  ARM: tegra: Add Tegra20 host1x clock support
  ARM: tegra: Add AUXDATA for Tegra20 host1x
  ARM: tegra: Tegra30 speedo-based process identification
  ARM: tegra: Add speedo-based process identification
  ARM: tegra: flexible spare fuse read function
  ARM: tegra: Implement 6395/1 for Tegra
  ARM: tegra: Add OF_DEV_AUXDATA for sflash driver in board dt
  ARM: tegra: enable data prefetch on L2
  ARM: tegra: Add OF_DEV_AUXDATA for SLINK driver in board dt
  ARM: tegra: common: using OF api for L2 cache init
  ARM: tegra: dt: add L2 cache controller
  ARM: tegra30: clocks: add AHB and APB clocks
  ARM: tegra: set up wlan clocks for tegra dt
  ARM: tegra: move irammap.h to mach-tegra
  ARM: tegra: move iomap.h to mach-tegra
  ARM: tegra: remove <mach/dma.h>
  ARM: tegra: move tegra-ahb.h out of arch/arm/mach-tegra/
  ARM: tegra: remove unnecessary includes of <mach/*.h>
  ...
2012-11-21 02:13:07 -08:00
Olof Johansson
02d1ea0d14 Merge branch 'ste-dt-for-next' of git://git.linaro.org/people/ljones/linux-3.0-ux500 into next/dt
From Lee Jones. It's an update of the previous ux500/dt branch with a few more
patches:

* 'ste-dt-for-next' of git://git.linaro.org/people/ljones/linux-3.0-ux500:
  ARM: ux500: Describe UART platform registering issues more accurately
  ARM: ux500: Enable all MMC devices on the u9540 when booting with DT
  ARM: ux500: Enable SDI4 port on the u9540 when booting with Device Tree
  ARM: ux500: Add UART support to the u9540 Device Tree
  ARM: ux500: Add skeleton DTS file for the u9540
  ARM: ux500: Add SDI (MMC) support to the HREF Device Tree
  ARM: ux500: Move regulator-name properties out to board DTS files

Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-21 01:18:57 -08:00
Olof Johansson
f09771bcd2 DTS updates for the LPC32xx Soc for 3.7
This time, only one patch: Adding the motor PWM to lpc32xx.dtsi
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iD8DBQBQqPx0caH/YBv43g8RAuzFAKCFpy/LcErik0mFUeyNJrPz3/l1gACgmng4
 SUDHt4IfsbL9iYlLIqkEIFM=
 =p23Y
 -----END PGP SIGNATURE-----

Merge tag 'lpc32xx-dts-for-3.7' of git://git.antcom.de/linux-2.6 into next/dt

From Roland Stigge:
DTS updates for the LPC32xx Soc for 3.7

This time, only one patch: Adding the motor PWM to lpc32xx.dtsi

* tag 'lpc32xx-dts-for-3.7' of git://git.antcom.de/linux-2.6:
  ARM: LPC32xx: Add the motor PWM to base dts file

Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-21 00:52:03 -08:00
Olof Johansson
90919bf214 ARM: tegra: device tree changes
A wide variety of device tree additions are made across many Tegra
 boards:
 
 * WiFi is supported on Seaboard, Ventana, and Cardhu.
 * An I2C mux is added for Ventana, and Tamonten.
 * SPI flash is added to Cardhu, and TrimSlice.
 * Temperature sensors are added to Harmony, Tamonten, and Ventana.
 * host1x (graphics/display controller) is added to the SoC include files.
 * HDMI displays are enabled on Harmony, TrimSlice, Tamonten, Plutux, Tec,
   and Whistler.
 
 This pull request is based on tegra-for-3.8-soc.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQppFoAAoJEMzrak5tbycx1WsQALzqZBCebkEIo0CfuYlVtZrX
 co2HBLsTis8KOI1lB5hZZdLvOD2sevwkw+YDtoG1k2ymZvR/Lpl3zdYdPCinA7gb
 Qzs+OlwnAla7J5BkgV0v69lZHBYd8jvxsFt9MZo1XkHjw2IRPyrzLhdmBHGLVj3J
 Tk7kk4OH64sDhDb+vZJXCtBJV0fvn10WNSskUHoQYZveGOCFGZXogrAht25tcoQO
 TM89tasMdRq3IhOxuzHHo/7AegyuTZdDzV4blNr1xOMzyz1b3P3sBh2ZiK+aBztX
 CCfpJ2ZUlRqTKSOU4qlM48dWffr/ZyP1u0VVi9Bu4Df/qBpS37NjagiVxMhiEasz
 0f3SZTAkZGh7yxi/BTmqu6vvQ0FWYgtOJPezK19RMXistdQkA/uiQDKqeBMTLTeA
 UXCnJdC05uBWhymy8DhJyryPQCJ1k3PJ+4pSmzemWIaAoQqpaH/q5yp4IAccr8wO
 pxZPtddD030iVdT5oYqBoAhn2W/mKtG1fShhp7wpj/qRYecUQICocTavuFG3DK0N
 k1OJ9rTxBZfnyeCBF/wdS/nNuI9xDk2WULVIya2cNu8I/te6QKp1fd4Jr3aPnZ/9
 4hiw5+L2dw2z7447EwlryC4sHttjVYEDHqsedR39YNPIn55D3mfsNX2iCczk1ZDU
 +OoRMiATrjILb1sOjJAs
 =ytxh
 -----END PGP SIGNATURE-----

Merge tag 'tegra-for-3.8-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/dt

From Stephen Warren:
ARM: tegra: device tree changes

A wide variety of device tree additions are made across many Tegra
boards:

* WiFi is supported on Seaboard, Ventana, and Cardhu.
* An I2C mux is added for Ventana, and Tamonten.
* SPI flash is added to Cardhu, and TrimSlice.
* Temperature sensors are added to Harmony, Tamonten, and Ventana.
* host1x (graphics/display controller) is added to the SoC include files.
* HDMI displays are enabled on Harmony, TrimSlice, Tamonten, Plutux, Tec,
  and Whistler.

This pull request is based on tegra-for-3.8-soc.

* tag 'tegra-for-3.8-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra: (47 commits)
  ARM: tegra: whistler: enable HDMI port
  ARM: tegra: tec: Enable HDMI output
  ARM: tegra: plutux: Enable HDMI output
  ARM: tegra: tamonten: Add host1x support
  ARM: tegra: trimslice: enable HDMI port
  ARM: tegra: harmony: enable HDMI port
  ARM: tegra: Add Tegra30 host1x support
  ARM: tegra: Add Tegra20 host1x support
  ARM: tegra: trimslice: enable SPI flash
  ARM: tegra: dts: add sflash controller dt entry
  ARM: tegra: ventana: Add NCT1008 temperature sensor
  ARM: tegra: tamonten: Add NCT1008 temperature sensor
  ARM: tegra: harmony: Add ADT7641 temperature sensor
  ARM: tegra: tec: Remove redundant DT properties
  ARM: tegra: tamonten: Add DDC/PTA pinmux
  ARM: tegra: dts: cardhu: enable SLINK4
  ARM: tegra: dts: add slink controller dt entry
  ARM: dt: tegra: ventana: define pinmux for ddc
  ARM: dt: t30 cardhu: set pinmux and power for wlan
  ARM: dt: t20 ventana: set pinmux and power for wlan
  ...
2012-11-21 00:29:21 -08:00
Maxime Ripard
67bea88dd8 ARM: sunxi: Add sunxi restart function via onchip watchdog
Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2012-11-21 09:25:25 +01:00
Olof Johansson
bcc5155d05 ARM: tegra: cleanup for 3.8
Various trivial cleanup changes of the Tegra code for 3.8.
 
 Many of the changes simply remove useless #include statements, which
 enable those headers to be removed or moved later, as work towards
 multi-platform zImage support.
 
 <mach/{iram,io}map.h> are moved up to arch/arm/mach-tegra to prevent
 any new code outside mach-tegra from using them.
 
 Finally, the regulator definitions in all board device tree files are
 updated to use the new simpler syntax that was agreed upon.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQpo5eAAoJEMzrak5tbycxhpoQAIZPMMXemJP7Hqvtx0iza5jG
 LVbBqb+sTEhESpdd43XeMK8n9umjVszseRJYm3vbekJp3crVE/Z0ikTTzmDUiwIj
 iz1t9U1i+EsAVZ977DF68InA/lWociKVqaDO4WEN4YZ19zGQJbghFKVic5yVZvNq
 hRWNvDUkRi+9FJHS7wBHQNuRIghSDxh90zFoc0UUs12J2z2OjXKPYypU7Ttp6aUY
 rBvuDlqRQ9SjFxuE2dYDvEWnB69ONL7LauAkSkoqgXGGP1a6v5pphm+Y3badCOrO
 q5hGUpvzO+DTfOncj5dlZedRq9vjS/QEF+qJQFvMPrUpv8QkOulY4nf7w/sYmk9o
 Rhm9G6BxFGDMdxruA9SBkqjEzPcI9cT18FRYkMtsHfWwUgu6NUB6bMhc++R6rOJS
 JNkH+DoWuEsGP2RyopZZEjKlrCxPv3vNNOz4wkaLH+gEQvE9EZ5mkqy8xNYQbMBb
 Yv93TCADrX9tw/3JfWjB6/WhZ9GVBcSie0hcW+2Nm7lUzzQ8q9DKMZobG20+KHBZ
 /+L4NmK7DR5u8M6xnZqPat2VAraFxYZFjy3Xd50ul7PphfJnR4c7ITqt4u6lJ6hn
 Bnc7/DNM5hgAncH+APon1tffLMqgsJphC4Chn7y7Y/wSYi216IA21pmSrrmpKkh9
 OqBOasN9GVmmHVnxNzHn
 =aH3p
 -----END PGP SIGNATURE-----

Merge tag 'tegra-for-3.8-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/cleanup

From Stephen Warren:
ARM: tegra: cleanup for 3.8

Various trivial cleanup changes of the Tegra code for 3.8.

Many of the changes simply remove useless #include statements, which
enable those headers to be removed or moved later, as work towards
multi-platform zImage support.

<mach/{iram,io}map.h> are moved up to arch/arm/mach-tegra to prevent
any new code outside mach-tegra from using them.

Finally, the regulator definitions in all board device tree files are
updated to use the new simpler syntax that was agreed upon.

* tag 'tegra-for-3.8-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra:
  ARM: tegra: move irammap.h to mach-tegra
  ARM: tegra: move iomap.h to mach-tegra
  ARM: tegra: remove <mach/dma.h>
  ARM: tegra: move tegra-ahb.h out of arch/arm/mach-tegra/
  ARM: tegra: remove unnecessary includes of <mach/*.h>
  iommu: tegra: remove include of <mach/iomap.h>
  staging: nvec: remove include of <mach/iomap.h>
  crypto: tegra: remove include of <mach/clk.h>
  ARM: tegra: update *.dts for regulator-compatible deprecation
  usb: phy: tegra remove include of <mach/iomap.h>
  usb: host: tegra remove include of <mach/iomap.h>
2012-11-21 00:17:40 -08:00
Olof Johansson
3f6f1cd6ff Merge branch 'armsoc/board' of git://github.com/hzhuang1/linux into next/boards
From Haojian Zhuang:
* 'armsoc/board' of git://github.com/hzhuang1/linux:
  ARM: mmp: select pinctrl driver
  + Linux 3.7-rc6
2012-11-21 00:00:25 -08:00
Olof Johansson
6fe05f33da More DT material for AT91:
- conversion of watchdog to DT
 - usart definition for evk-pro3 board
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQEcBAABAgAGBQJQqm8pAAoJEAf03oE53VmQpEEH/00dsxSUrL06NzwP8Y1+UjW8
 OXJPJUU0Mor/b5zCp3wsxB4+imZ4y4oqJ42qvFZjRLHj0KMvVdnxm5SNIpbQtXxV
 jXPqXYk8yfH4YF3DDLuiD9wkXjwtgck7+D7ogcAIb9bbWyyGusKIcs72smvGanCd
 zZrWIOGwXlqgrF5CX8kl6SIhdnYvMtee7GlzbiFHlKr4CLPOIR3iahnHR26gkzLH
 cRjYVujYaHpQKBR8XvMgIl7brCUTX2KuMajvVOF8EShk8BU2MW1GHFY0cNfqaKRn
 R/Z9itXk6P/h3s/Wf+Qyfpuz3E0zbS80uN/NyrIbcGbAQQIesuo8pcd9xZZ5yg0=
 =whJu
 -----END PGP SIGNATURE-----

Merge tag 'at91-for-next-dt' of git://github.com/at91linux/linux-at91 into next/dt

From Nicolas Ferre:
More DT material for AT91:

- conversion of watchdog to DT
- usart definition for evk-pro3 board

* tag 'at91-for-next-dt' of git://github.com/at91linux/linux-at91:
  ARM: at91/dts: evk-pro3: enable watchdog
  ARM: at91/dts: add at91sam9_wdt driver to at91sam926x, at91sam9g45
  watchdog: at91sam9_wdt: add device tree support
  ARM: at91: dt: evk-pro3: enable uart0 and uart2
2012-11-20 23:11:45 -08:00
Alexander Shiyan
49a88052b0 ARM: clps711x: p720t: Unneeded inclusion of head-sa1100.S removed
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-20 22:21:52 -08:00
Olof Johansson
5ffd785402 Allwinner SoC support for 3.8
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iEYEABECAAYFAlCmwSAACgkQGxsu9jQV9nbssgCcChzwuFlPkP4sVdTtAGGh5mWD
 rNcAn3PfG1ByMR57GkDtdQiAjS5N2dME
 =Pi49
 -----END PGP SIGNATURE-----

Merge tag 'tags/sunxi-support-for-3.8' of git://github.com/mripard/linux into next/soc

From Maxime Ripard:
Allwinner SoC support for 3.8

* tag 'tags/sunxi-support-for-3.8' of git://github.com/mripard/linux:
  ARM: sunxi: Add entry to MAINTAINERS
  ARM: sunxi: Add device tree for the A13 and the Olinuxino board
  ARM: sunxi: Add earlyprintk support
  ARM: sunxi: Add basic support for Allwinner A1x SoCs
  irqchip: sunxi: Add irq controller driver
  clocksource: sunxi: Add Allwinner A1X Timer Driver
  clk: sunxi: Add dummy fixed rate clock for Allwinner A1X SoCs

Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-20 22:14:59 -08:00
Stephen Warren
9846210b1e ARM: tegra: seaboard: add missing DT vendor prefixes
A couple devices' DT compatible values only contained the device name
without any vendor prefix. Add the missing vendor prefixes.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2012-11-20 22:58:54 -06:00
Doug Anderson
95e82941b7 ARM: dts: Add board dts file for Snow board (ARM Chromebook)
This dts file is based on the Snow dts file in the Chromium OS kernel
tree with the following changes:
* Some details have been updated to match the exynos5250-smdk5250.dts
  file from linux-next (as of c11068538994430547722dc9fb515a0ceefd5cb9).
* This file doesn't include references to hardware whose upstream
  support isn't quite there yet.  That includes most i2c devices.
  Note that most i2c busses have been included with no devices.

The Snow dts file is mostly just an include of the "cros5250" dts file
which describes a class of similar boards. Support for other boards has
not yet been send upstream.

With this file and a change to use UART3 for serial output I can:
* Boot to a command line using either SD or EMMC as a root filesystem
* See the power button and lid switch using evtest.

Signed-off-by: Doug Anderson <dianders@chromium.org>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-11-21 13:32:21 +09:00
Doug Anderson
de0f42beef ARM: dts: Move the dwmmc aliases from smdk5250 dts to exynos
The aliases for dwmmc were placed in the SMDK5250 dts file but really
should be common for all exynos5250 boards.  Move it to the common CPU
file.

Signed-off-by: Doug Anderson <dianders@chromium.org>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-11-21 13:31:32 +09:00
Thomas Petazzoni
895e4e3a7d Marvell XOR driver DT changes for 3.8
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iEYEABECAAYFAlCsAhAACgkQ9lPLMJjT96dSzQCgoJwqNxCWQPYFgi1XgxYDYaOM
 A10An1l0h8WMAgy/eDBlyWOjA8FD8Ekx
 =xq4r
 -----END PGP SIGNATURE-----

Merge tag 'marvell-xor-board-dt-changes-3.8-v2' of github.com:MISL-EBU-System-SW/mainline-public into test-the-merge

Marvell XOR driver DT changes for 3.8

Conflicts:
	arch/arm/boot/dts/armada-xp.dtsi

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2012-11-20 23:40:29 +01:00
Thomas Petazzoni
f40788a666 Marvell Ethernet DT update for clk support
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iEYEABECAAYFAlCsAS4ACgkQ9lPLMJjT96eiRACgiaH1oX0V6DRuSUT29OSqOaSa
 S/QAoKl9x/4EL8Vm+/2GXNmjCczc9ofX
 =SF8H
 -----END PGP SIGNATURE-----

Merge tag 'marvell-neta-dt-clk-updates-3.8' of github.com:MISL-EBU-System-SW/mainline-public into test-the-merge

Marvell Ethernet DT update for clk support
2012-11-20 23:38:00 +01:00
Thomas Petazzoni
089c38e724 Marvell boards changes related to Ethernet, for 3.8
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iEYEABECAAYFAlCmB6oACgkQ9lPLMJjT96elAwCfQyZY9HP0PW+0y2VRbKLYlrTW
 vaQAoJMNKRaxjBwnF5As4I4/5g0rsE/H
 =hRb7
 -----END PGP SIGNATURE-----

Merge tag 'marvell-boards-net-for-3.8' of github.com:MISL-EBU-System-SW/mainline-public into test-the-merge

Marvell boards changes related to Ethernet, for 3.8

Conflicts:
	arch/arm/boot/dts/armada-370-xp.dtsi
	arch/arm/boot/dts/armada-xp-db.dts

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2012-11-20 23:35:16 +01:00
Thomas Petazzoni
42db1215ee arm: mvebu: remove 'clock-frequency' properties from Armada 370/XP Ethernet nodes
The mvneta driver for the Marvell Armada 370/XP Ethernet devices has
gained proper clock framework integration, and the corresponding
Device Tree nodes now have a correct 'clocks' pointer.

The 'clock-frequency' properties in the various .dts files for Armada
370/XP boards have therefore become useless.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2012-11-20 23:15:56 +01:00
Thomas Petazzoni
4aa935a2cf arm: mvebu: add 'clocks' property to Ethernet nodes for Armada 370/XP SoCs
The mvneta driver now understands a standard 'clocks' clock pointer
property in the Device Tree nodes for the Ethernet devices, so we add
the right clock reference for the different Ethernet ports of the
Armada 370/XP SoCs.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2012-11-20 23:15:47 +01:00
Thomas Petazzoni
05e121af94 Marvell boards changes related to Ethernet, for 3.8
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iEYEABECAAYFAlCmB6oACgkQ9lPLMJjT96elAwCfQyZY9HP0PW+0y2VRbKLYlrTW
 vaQAoJMNKRaxjBwnF5As4I4/5g0rsE/H
 =hRb7
 -----END PGP SIGNATURE-----

Merge tag 'marvell-boards-net-for-3.8' of github.com:MISL-EBU-System-SW/mainline-public into test-the-merge

Marvell boards changes related to Ethernet, for 3.8

Conflicts:
	arch/arm/boot/dts/armada-370-xp.dtsi
	arch/arm/boot/dts/armada-xp-db.dts
2012-11-20 23:09:20 +01:00
Lee Jones
79b1c9e69d ARM: ux500: Enable all MMC devices on the u9540 when booting with DT
The u9540 supports 3 MMC devices. This patch enables two of them
and updates the configuration of the already enabled SDI4 port.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-11-20 16:10:46 +00:00
Lee Jones
80c70c6821 ARM: ux500: Enable SDI4 port on the u9540 when booting with Device Tree
Here we add the device node for the SDI4 (MMC) port to the u9540
Device Tree source file. This will allow successful probing of
the internal MMC storage device when booting with DT enabled.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-11-20 16:10:46 +00:00
Lee Jones
cc3ad84aa0 ARM: ux500: Add UART support to the u9540 Device Tree
Add the 3 UART nodes required to enable serial ports on the u9540.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-11-20 16:10:45 +00:00
Lee Jones
0c32e98fbc ARM: ux500: Add skeleton DTS file for the u9540
This patch sees the creation of a sparse Device Tree file for
ST-Ericsson's latest development board supporting the latest
dual-core Cortex-a9 u9540 SoC.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-11-20 16:10:44 +00:00
Lee Jones
7127c57fd3 ARM: ux500: Add SDI (MMC) support to the HREF Device Tree
Here we add the Device Tree nodes which are required to successfully
probe the MMCI driver which will enable the four cards available on
ST-Ericsson's HREF hardware development platform.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-11-20 16:10:43 +00:00
Lee Jones
65d6f6f35c ARM: ux500: Move regulator-name properties out to board DTS files
Regulator supply names should be allocated by board rather than
per SoC, as the same SoC could be wired differently on varying
hardware. Here we push all regulator-name allocation out to the
dbx5x0 subordinate board files; HREF and Snowball.

Requested-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-11-20 16:10:43 +00:00
Thomas Petazzoni
a1d53dab4f arm: mvebu: add XOR engines to Armada XP .dtsi
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2012-11-20 16:03:37 +01:00
Thomas Petazzoni
0122eee890 arm: mvebu: add XOR engines to Armada 370 .dtsi
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2012-11-20 16:03:36 +01:00
Sebastian Hesselbarth
49f175b9fe arm: dove: Convert Dove to DT XOR DMA engine
With DT support for Marvell XOR DMA engine, make use of it on Dove.
Also remove the now redundant code in DT board init for xor engines.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2012-11-20 16:03:35 +01:00
Andrew Lunn
c896ed0fd7 arm: kirkwood: Convert XOR instantiation to DT.
Use DT to describe the two XOR DMA engines on Kirkwood. Remove the
C code initialization.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2012-11-20 16:03:35 +01:00
Gregory CLEMENT
3d82daaaa6 arm: mvebu: SATA support: board-level DT data for Armada 370/XP boards
Add the SATA device tree bindings for
- Armada XP evaluation board (DB-78460-BP)
- Armada 370 evaluation board (DB-88F6710-BP-DDR3)

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Lior Amsalem <alior@marvell.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2012-11-20 15:42:07 +01:00
Gregory CLEMENT
a6a6de1a0a arm: mvebu: SATA support: SoC-level DT data for Armada 370/XP
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Lior Amsalem <alior@marvell.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2012-11-20 15:42:06 +01:00
Stefan Roese
f055f1f682 ARM: sunxi: Add sun4i and cubieboard support
This patch adds support for the Cubieboard based on the Allwinner
A10/sun4i SoC. Currently only UART is supported. Other devices
will eventually follow.

Signed-off-by: Stefan Roese <sr@denx.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2012-11-20 15:36:34 +01:00
Stefan Roese
de0bf33fc2 ARM: sunxi: Restructure sunxi dts/dtsi files
For the new sun4i/Cubieboard (A10) support, lets re-strucure the
sun5i dts files to make it more generic. Those are the new
dts/dtsi files:

sunxi.dtsi - Devices common to all Allwinner sunXi SoC's
sun4i.dtsi - sun4i Devices, will include sunxi.dtsi
sun5i.dtsi - sun5i Devices, will include sunxi.dtsi
board.dts - will include either sun4i.dtsi or sun5i.dtsi

Additionally the "duart" label in the olinuxino.dts is changed to
"uart1".

Signed-off-by: Stefan Roese <sr@denx.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2012-11-20 15:36:00 +01:00
Marek Vasut
160d5f2760 ARM: mxs: Add SchulerControl SPS1 DTS file
Add DTS file for this custom board.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-20 22:09:05 +08:00
Andrew Lunn
1611f87251 ARM: Kirkwood: switch to DT clock providers
With true DT clock providers available switch Kirkwood clock setup in
DT- enabled boards. While AUXDATA can be removed completely from bus
probing, some devices still don't know about DT. Therefore, some clkdev
aliases are created until these devices also move to DT.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2012-11-20 14:46:50 +01:00
Sebastian Hesselbarth
5b03df9ace ARM: dove: switch to DT clock providers
With true DT clock providers available switch Dove clock setup in DT-
enabled boards. While AUXDATA can be removed completely from bus probing,
some devices still don't know about DT at all. Therefore, some clock
aliases are created until the devices also move to DT.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2012-11-20 14:46:50 +01:00
Gregory CLEMENT
307c2bf467 clocksource: convert time-armada-370-xp to clk framework
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Tested-by Gregory CLEMENT <gregory.clement@free-electrons.com>
2012-11-20 14:46:49 +01:00
Gregory CLEMENT
9d2027830c clk: armada-370-xp: add support for clock framework
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by Gregory CLEMENT <gregory.clement@free-electrons.com>
2012-11-20 14:46:48 +01:00
Fadil Berisha
a04878645f ARM: imx23-olinuxino: Add spi support
imx23-olinuxino board has spi pins exposed on external connector.
This patch add spi support.

Signed-off-by: Fadil Berisha <f.koliqi@gmail.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-20 21:46:14 +08:00
Vasanth Ananthan
c47d244a64 ARM: EXYNOS: DT Support for SATA and SATA PHY
This patch adds Device Nodes for SATA and SATA PHY device.

Signed-off-by: Vasanth Ananthan <vasanth.a@samsung.com>
[kgene.kim@samsung.com: removed address definitions as per comments]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-11-20 21:02:17 +09:00
Tomasz Figa
d36bb0f040 ARM: dts: Remove broken-voltage property from sdhci node for exynos4210-trats
The broken voltage property has been replaced with auto detection based
on voltages available on vmmc voltage regulator, so there is no use for
it now.

This patch removes the now unused property from Trats Device Tree
sources.

Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-11-20 20:17:20 +09:00
Abhilash Kesavan
b9fa3e7b31 ARM: EXYNOS: Add aliases for i2c controller
Add aliases to determine the i2c controller instance.

Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-11-20 18:20:56 +09:00
Tomasz Figa
0d09bf69fc ARM: dts: Add node for touchscreen for exynos4210-trats
This patch adds a device tree node for the Melfas MMS114-controlled
touchscreen present on Samsung Trats board.

Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-11-20 16:26:18 +09:00
Tomasz Figa
50528aa147 ARM: dts: Add node for touchscreen voltage regulator for exynos4210-trats
This patch adds device tree node for a fixed voltage regulator used for
touchscreen on Samsung Trats board.

Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-11-20 16:26:18 +09:00
Tomasz Figa
b74cbbc7b6 ARM: dts: Add node for i2c3 bus for exynos4210-trats
This patch adds device tree node for i2c3 bus to device tree source
of Samsung Trats board. This bus is used by mms114 touchscreen
controller, for which support will be added in separate patch.

Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-11-20 16:26:17 +09:00
Tomasz Figa
9eb61020a0 ARM: dts: Add nodes for GPIO keys available on Trats
This patch extends dts file of Samsung Trats board to add support for
available GPIO keys using gpio-keys driver.

Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-11-20 16:26:17 +09:00
Tomasz Figa
e92501263c ARM: dts: Update for pinctrl-samsung driver for exynos4210-trats
This patch updates all parts of Trats dts related to pin configuration
to use new GPIO and pinctrl bindings, instead of (now unsupported on
Exynos4) legacy gpio-samsung bindings.

Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-11-20 16:26:17 +09:00
Christian Daudt
8ac49e0485 Add support for generic BCM SoC chipsets
In order to start upstreaming Broadcom SoC support, create
a starting hierarchy, arch and dts files.
The first support SoC family that is planned is the
BCM281XX (BCM11130/11140/11351/28145/28155) family of dual A9 mobile
SoC cores.
This code is just the skeleton code for get the machine upstreamed. It
has been made MULTIPLATFORM compatible.
Next steps
----------
Upstream a basic set of drivers - sufficient for a console boot to
ramdisk. These will includer timer, gpio, i2c drivers.
After this basic set, we will proceed with a more comprehensive set
of drivers for the 281XX SoC family.

v2 patch mods
--------
 - Remove l2x0_of_init call as there were problems with the code.
   A separate patch will be submitted with cache init code
 - Rename capri files and refs to bcm281xx-based names
 - Add bcm281xx binding doc
 - various misc cleanups

v3 patch mods
-------------
 - Remove extra #include lines
 - Remove remaining references to capri
 - dt uart chipset string added
 - cleaned up chip # references

v4 patch mods
-------------
 - swap order of compatible definitions for uart
 - fix typo

v5 patch mods
-------------
 - Rename bcm281xx to bcm11351 in dts+code,
   leaving references to bcm281xx only in help+comments.

v6 patch mods
-------------
 - fix typo in uart 'compatible' string

Signed-off-by: Christian Daudt <csd@broadcom.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-19 22:39:07 -08:00
Olof Johansson
1443f8a0b9 This change enables DT related options in DA8XX
defconfig.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.10 (GNU/Linux)
 
 iQIcBAABAgAGBQJQj+V2AAoJEGFBu2jqvgRNwZYP+wdcUqOG9uLFi+BHUcWCodDb
 G7uQdn/Pt+FoeBYQMqolU6eOM94+UEocixWjIxObLnM5xMdRyk4KKb6KjXudqi57
 cF+Ol5QBv42+T3jockChgq1CACNyXYyGX7DXRKCxT1lfdbyFuWqw3osugLXptWZk
 /zcdH0wVz6ouZmMFmDOG760SaP0vGVZfV81Ef58Uf0PrpgsKBLWsYPYq/pW2lBrP
 uIT60Q35YgK8D1YIOHH1aC/qHoSKpNHiEMQtFJ0o1VpeZmGYZCy59OOqGf7KZIYc
 kTZV1KcTi8nfG2u/pcr7QDzCdwqzWtQcrZEo2Z4lSNUKluCM9fMjnBKq8JppaiJl
 CoaZJ3NHBwJxzqmnWfldctZ5a9Y03e0oDHmFhysoVHyFcRv/aUgqvsfAiSqcKQIb
 QkjCBx4ukK9bvN1yQh38I8aLpqxmoSyqiwY44aLpTOIo5mDHJT8S1WouTaKxmBKc
 7VvKZpr/Gh/Qu1iiHHolPXMxbC8esuAdO+jBpbbCEEdOvoLyaug0aGX5cgDG4apW
 CaeW9teu1sPjKZ+pPLI+x1J7XteGeIKN7FXrHHaHg3YHZtGd8KFIZ9s2ZzTRTDzT
 IjUpzI3lGJcii1rES60muZ0baLar8MECbciopJkFNmwBUhZOsoqXlwPw8PaME94t
 oSlf2NAxovbnSq+KHWKm
 =bDAD
 -----END PGP SIGNATURE-----

Merge tag 'davinci-for-v3.8/defconfig' of git://gitorious.org/linux-davinci/linux-davinci into next/boards

From Sekhar Nori:

This change enables DT related options in DA8XX
defconfig.

* tag 'davinci-for-v3.8/defconfig' of git://gitorious.org/linux-davinci/linux-davinci:
  ARM: davinci: da8xx defconfig: enable DT config options

Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-19 22:31:12 -08:00
Olof Johansson
3fcdc0555f ARM: davinci: move dtb targets to common location
The dtb targets belong in arch/arm/boot/dts/Makefile now, so move the
newly added davinci targets there.

Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-19 22:25:59 -08:00
Olof Johansson
6ee052a38f These changes add DT boot support to DaVinci DA850
SoC.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.10 (GNU/Linux)
 
 iQIcBAABAgAGBQJQj6QrAAoJEGFBu2jqvgRNn0gQAIr9rITJ0pg5KdUNLdEZE2yE
 XjnkQWDF94KWvLhqj4rmYiPZDDCCaLSMgxbXizkJApmqwNeSX20MjeZmiURAXTva
 AFNVa7CAHtO7oXIgk9bhZkkFk+VFHuGRNHHjO1kLbMr/pmfYJ16rgN0PB+PM9AkG
 7bWP5F7Fd9wVkB4fmdrvTV0JdC5NquSmGUwnEQ9BCPoP89X4Flk3bSx2l5Q0aYN2
 PwxTBlDwxZ59yoC7XqoHfox14M6G+0qd48tsT8yCxIyKNh1tNA02B9VIK6GT0fVL
 Y0ya6SZBLDSDnRL3X9+NgGk9xdXDqRgEgLWsFulJrbB2RIBUzhZ/lVrusmYEhKLn
 cCLuxrDjJj6T97fKpd/ZX0GDxldaAogjhNFqzAYLYAiGauSie7AXh1dg9iw5nkpJ
 PV2FHpyWKShvhca5i+DlZbl4p4XohVp5H9v9gWuqSw68DTiT2qweq24g9n70279N
 rmyI8mBcKfj0x040FPTZCNGwcSOxLfH6Q38ZTDWrkGeJEaWRm0VRTzMX7/zDXDPN
 vy1cJdPmEXPUx6pmWhUN7dA25MOnsPOVpKpwB8bYBSWoPvj4navbw3S+YhoTS3G/
 EJPvR0IpeiptLgBrOtUlqJrEPA2O3NEXqTeLD2y6DapMPInXw/Ta5l1B5XDd/a3V
 tkJZCkmgBpRTLuEYfG05
 =/FbB
 -----END PGP SIGNATURE-----

Merge tag 'davinci-for-v3.8/dt' of git://gitorious.org/linux-davinci/linux-davinci into next/dt

From Sekhar Nori:

These changes add DT boot support to DaVinci DA850
SoC.

* tag 'davinci-for-v3.8/dt' of git://gitorious.org/linux-davinci/linux-davinci:
  ARM: davinci: da850: generate dtbs for da850 boards
  ARM: davinci: add support for am1808 based EnBW CMC board
  ARM: davinci: da850 evm: add DT data
  ARM: davinci: da850: add SoC DT data
  ARM: davinci: da850: add DT boot support
  ARM: davinci: da8xx: add DA850 PRUSS support
  ARM: davinci: add platform hook to fetch the SRAM pool
  ARM: davinci: da850: changed SRAM allocator to shared ram.
  ARM: davinci: sram: switch from iotable to ioremapped regions
  uio: uio_pruss: replace private SRAM API with genalloc
  ARM: davinci: serial: provide API to initialze UART clocks
  ARM: davinci: convert platform code to use clk_prepare/clk_unprepare

Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-19 22:25:01 -08:00
Jean-Christophe PLAGNIOL-VILLARD
c12a819e3a ARM: at91: pm9g45: add mmc support
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-11-20 01:10:28 +08:00
Jean-Christophe PLAGNIOL-VILLARD
301333bc6c ARM: at91: Animeo IP: add mmc support
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-11-20 01:10:28 +08:00
Jean-Christophe PLAGNIOL-VILLARD
199e2edec4 ARM: at91: dt: add mmc pinctrl for Atmel reference boards
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-11-20 01:10:27 +08:00
Jean-Christophe PLAGNIOL-VILLARD
d4fe9ac76d ARM: at91: dt: at91sam9: add mmc pinctrl support
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-11-20 01:10:27 +08:00
Ludovic Desroches
4134a45527 ARM: at91/dts: add nodes for atmel hsmci controllers for atmel boards
Add mci controller nodes to atmel boards.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-11-20 01:10:23 +08:00
Ludovic Desroches
9873137a7a ARM: at91/dts: add nodes for atmel hsmci controllers for atmel SOCs
Add mci controller nodes to atmel SOCs.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-11-20 01:10:20 +08:00
Linus Walleij
17d6b293e7 Merge branch 'delivery/pinctrl-at91-3.8' of http://github.com/at91linux/linux-at91 into at91 2012-11-21 10:48:33 +01:00
Kukjin Kim
326f3abf19 Merge branch 'next/dt-exynos4x12' into next/dt-samsung
Conflicts:
	arch/arm/boot/dts/exynos4210.dtsi
2012-11-19 13:18:47 +09:00
Rajanikanth H.V
a12810ab9f ab8500: Add devicetree support for chargalg
This patch adds device tree support for charging algorithm driver

Signed-off-by: Rajanikanth H.V <rajanikanth.hv@stericsson.com>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-11-18 19:37:18 -08:00
Rajanikanth H.V
4aef72dbb2 ab8500: Add devicetree support for charger
This patch adds device tree support for ab8500-charger driver

Signed-off-by: Rajanikanth H.V <rajanikanth.hv@stericsson.com>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-11-18 19:37:16 -08:00
Rajanikanth H.V
bd9e8ab2d5 ab8500: Add devicetree support for btemp
This patch adds device tree support for battery-temperature-monitor driver

Signed-off-by: Rajanikanth H.V <rajanikanth.hv@stericsson.com>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-11-18 19:37:14 -08:00
Rajanikanth H.V
e0f1abeba5 ab8500: Add devicetree support for fuelgauge
- This patch adds device tree support for fuelgauge driver
- optimize bm devices platform_data usage and of_probe(...)
  Note: of_probe() routine for battery managed devices is made
  common across all bm drivers.
- test status:
  - interrupt numbers assigned differs between legacy and FDT mode.

Signed-off-by: Rajanikanth H.V <rajanikanth.hv@stericsson.com>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-11-18 19:37:04 -08:00
Tomasz Figa
64a574344d ARM: dts: Add nodes for pin controllers for exynos4x12
This patch adds nodes for pin controllers available on
EXYNOS4X12 SoCs supported by pinctrl-samsung driver.

Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Thomas Abraham <thomas.abraham@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-11-19 10:03:07 +09:00
Kukjin Kim
bdd45eaa7b Merge branch 'next/pinctrl-samsung' into next/dt-exynos4x12 2012-11-19 10:03:02 +09:00
Kukjin Kim
bab797f8e3 Merge remote-tracking branch 'pinctrl/samsung' into next/pinctrl-samsung 2012-11-19 10:00:41 +09:00
Jean-Christophe PLAGNIOL-VILLARD
ad8a15d99c ARM: at91: add Somfy Animeo IP board support
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-11-19 07:51:11 +08:00
Joachim Eastwood
c84ca7ce3a ARM: AT91: Add AT91RM9200EK board device tree
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-11-19 07:51:10 +08:00
Joachim Eastwood
fe975cf6d0 ARM: AT91: Add AT91RM9200 device tree
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-11-19 07:51:10 +08:00
Jean-Christophe PLAGNIOL-VILLARD
ee867d8eab ARM: at91: add Ronetix pm9g45 board support
CPU Module with ATMEL AT91SAM9G45
http://www.ronetix.at/pm9g45.html

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-11-19 07:51:07 +08:00
Jean-Christophe PLAGNIOL-VILLARD
c58c0c5acc ARM: at91: dt: at91sam9260: split rts and cts pinctrl not
as we just use the rts and not the rts & cts for rs485

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-11-19 07:50:56 +08:00
Jean-Christophe PLAGNIOL-VILLARD
9e3129e937 ARM: at91: fix usart/uart namimg in pinctrl
USART are the full pin uart
DBGU the debug Unit
UART the two pin uart

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-11-19 06:54:31 +08:00
Jean-Christophe PLAGNIOL-VILLARD
d9b4fe837d ARM: at91sam9: add macb pinctrl support
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-11-19 06:54:25 +08:00
David S. Miller
67f4efdce7 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Minor line offset auto-merges.

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-17 22:00:43 -05:00
Greg Kroah-Hartman
1e619a1bf9 Merge 3.7-rc6 into tty-next 2012-11-16 18:26:00 -08:00
Linus Walleij
64100a03ad ARM: integrator: hook the CP into the SoC bus
This hooks the Integrator/CP into the SoC bus when booting from
device tree, by mapping the CP controller registers first,
then registering the SoC device, and then populating the device
tree with the SoC device as parent.

Cc: Lee Jones <lee.jones@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-16 22:26:07 +01:00
Linus Walleij
e67ae6be73 ARM: integrator: hook the AP into the SoC bus
This hooks the Integrator/AP into the SoC bus when booting from
device tree, by mapping the AP controller registers first,
then registering the SoC device, and then populating the device
tree with the SoC device as parent.

Introduce some helpers in the core to provide sysfs files
detailing the use of the SoC ID which will later be reused by
the Integrator/CP patch for the same bus grouping.

Cc: Lee Jones <lee.jones@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-16 22:25:50 +01:00
Maxime Ripard
d4da2ebb3e ARM: sunxi: Add device tree for the A13 and the Olinuxino board
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2012-11-16 21:56:53 +01:00
Stephen Warren
73368ba0e1 ARM: tegra: add TWD to device tree
This will allow timer.c to use twd_local_timer_of_register(), and
hence not need to hard-code the TWD address or IRQ.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-16 12:22:16 -07:00
Stephen Warren
380e04ac2c ARM: tegra: define DT bindings for and instantiate RTC
The Tegra RTC maintains seconds and milliseconds counters, and five alarm
registers. The alarms and other interrupts may wake the system from
low-power state.

Define a DT binding for this HW module, and add the module into the Tegra
device tree files.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-16 12:22:16 -07:00
Stephen Warren
2f2b7fb202 ARM: tegra: define DT bindings for and instantiate timer
The Tegra timer provides a number of 29-bit timer channels, a single
32-bit free running counter, and in the Tegra30 variant, 5 watchdog modules.
The first two channels may also trigger a legacy watchdog reset.

Define a DT binding for this HW module, and add the module into the Tegra
device tree files.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-16 12:22:16 -07:00
Stephen Warren
2658ef15b2 ARM: tegra: whistler: enable HDMI port
Enable host1x, and the HDMI output. Whistler also has a DSI-based LCD,
and a VGA output. tegradrm doesn't support either of those output types
yet.

Based on work by Thierry Reding for TrimSlice.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-16 10:56:38 -07:00
Arnd Bergmann
e014f774d3 It's based on imx/multiplatform branch. Most of them are dts changes.
There are also a few imx6 improvement patches in there.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQEcBAABAgAGBQJQpeRkAAoJEFBXWFqHsHzOHMoH/3pxLWMHlaFFN70gm33GIEpj
 6/P0afKhjEseQDfbvLPfRPwHTQIkw/xQ2rfSrZGUnhgAGN2SfOcxiREFpdChgqyb
 b5kO+3oQpnQTFce6tuqCI8j4LAqr63AHhJPWZuDEBaR52Vs0i9gYr2Zwv7i+iUh7
 fuLu+NDQLKOkEW7W97FRFVWKRGmSMhJYvhNn+kgleFUhvzUKpJ6n7kFsT05BSl97
 EiJHtVxOv+RtlFvx7jrTr18NM2i4Kb4IzEfLzgYOowK9cwfNuhnaxsQvAUiGSa+z
 EuvXdKN2btW0PtqHVBPdz5T0OzTyJheaCETKTqz0XM32/SVz5Ma3gZEEDagGLiw=
 =zBAI
 -----END PGP SIGNATURE-----

Merge tag 'imx-dt-3.8' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/dt

From Shawn Guo <shawn.guo@linaro.org>:
It's based on imx/multiplatform branch.  Most of them are dts changes.
There are also a few imx6 improvement patches in there.

* tag 'imx-dt-3.8' of git://git.linaro.org/people/shawnguo/linux-2.6:
  ARM: imx6q: select ARM and PL310 errata
  ARM: imx6q: print silicon version on boot
  ARM i.MX dts: Consistently add labels to devicenodes
  ARM: dts: imx6q-sabresd: add volume up/down gpio keys
  ARM: dts: imx53: pinctl update
  ARM: imx: enable cpufreq for imx6q
  ARM: dts: imx6q: enable snvs lp rtc
  ARM: dts: imx6q-sabreauto: Add basic support
  ARM: imx6q: let users input debug uart port number
  ARM: dts: imx53-qsb: Make DA9053 regulator functional
  ARM: dts: imx53-qsb: Use pinctrl for gpio-led
  ARM i.MX dtsi: Add default bus-width property for esdhc controller

Signed-off-by: Arnd Bregmann <arnd@arndb.de>
2012-11-16 17:57:23 +01:00
Arnd Bergmann
93363526c8 It's mxs device tree changes for 3.8. The majority is device tree
source updates.  One timer improvement and one defconfig update are
 also included there.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQEcBAABAgAGBQJQpeyAAAoJEFBXWFqHsHzOgpsH/3b8dVbanZFsAwm5z1rF2DY2
 xrI5Xjqmk8K76CoZopRjQo/u6/SFbARzhClzCywBZKeVDM4Ah15bAN7wABmLgaVV
 xMDF8pA9mDZCzRwKEH6SG85n2/lMupG6qjbDNG22FXYfUAYJRxopoSDdNjfkvYr0
 Da5ZcvC9qvYnyyp37vYTI6CVO4EgJseoirvaJOKCALb5FFpzq0QEkEYK6IIx7pg3
 j9K2ZPy4/MIrsQQMyiv9AFEbUkUWy+deuTHv9Sl8+ddoqPtqNy4EfICt+no5uBmp
 frDg003/67Pz/fIm7lJ5IMBF4X0TW4OqMv9c2afG8/kJP34rXnBJVHdLKil731k=
 =jEM1
 -----END PGP SIGNATURE-----

Merge tag 'mxs-dt-3.8' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/dt

From Shawn Guo <shawn.guo@linaro.org>:
It's mxs device tree changes for 3.8.  The majority is device tree
source updates.  One timer improvement and one defconfig update are
also included there.

* tag 'mxs-dt-3.8' of git://git.linaro.org/people/shawnguo/linux-2.6:
  ARM: mxs_defconfig: Improve USB related support
  ARM: mxs: apf28dev: Add I2C and SPI support
  ARM: mxs: Setup scheduler clock
  ARM: dts: mxs: Add hog pins to Crystalfontz boards
  ARM: dts: cfa10036: Use pinctrl for power led
  ARM: mxs: apf28dev: Add LCD and backlight support
  ARM: mxs: apf28dev: Add pinctrl and gpios
  ARM: dts: mxs: Add 16 bits LCD screen muxing options for I.MX28
  ARM: dts: cfa10049: Add the DH2228FV DAC to the DTS
  ARM: mxs: Add support for the Armadeus Systems APF28Dev docking board
  ARM: mx28: Skip OCOTP FEC MAC setup if in DT
  ARM: dts: mxs: Add PWM3 muxing options for i.MX28
  ARM: mxs: Add support for the Armadeus Systems APF28 module
  ARM: dts: cfa10049: Add FEC to the CFA-10049 expansion board
  ARM: dts: imx23-olinuxino: Use pinctrl for gpio-led
  ARM: dts: imx23-olinuxino: Remove unneeded "default-on"
  ARM: dts: imx28-evk: Use pinctrl for gpio-led

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-11-16 17:55:01 +01:00
Arnd Bergmann
8ec1c81172 Merge branch 'arm-next' of git://git.xilinx.com/linux-xlnx into next/dt
From Michal Simek <michal.simek@xilinx.com>:

These are based on previous patches (arm-soc zynq/cleanup branch).
The branch is still based on rc3 but I have also tried to merged it
with the v3.7-rc5 and there is no issue.

* 'arm-next' of git://git.xilinx.com/linux-xlnx:
  ARM: zynq: add clk binding support to the ttc
  ARM: zynq: use zynq clk bindings
  clk: Add support for fundamental zynq clks
  ARM: zynq: dts: split up device tree
  ARM: zynq: Allow UART1 to be used as DEBUG_LL console.
  ARM: zynq: dts: add description of the second uart
  ARM: zynq: move arm-specific sys_timer out of ttc
  zynq: move static peripheral mappings
  zynq: remove use of CLKDEV_LOOKUP
  zynq: use pl310 device tree bindings
  zynq: use GIC device tree bindings

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-11-16 17:47:11 +01:00
Thierry Reding
cab2ed62fe ARM: tegra: tec: Enable HDMI output
Enable the HDMI output found on Tamonten Evaluation Carrier boards.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-16 09:17:09 -07:00
Thierry Reding
358f88937d ARM: tegra: plutux: Enable HDMI output
Enable the HDMI output found on Plutux boards.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-16 09:17:08 -07:00
Thierry Reding
e6f0979606 ARM: tegra: tamonten: Add host1x support
Hook up the required regulators, I2C DDC adapter and hotplug detect GPIO
to the Tamonten HDMI output. Carrier boards still need to explicitly
enable the output to use it.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-16 09:17:08 -07:00
Thierry Reding
dced3e3ee5 ARM: tegra: trimslice: enable HDMI port
Enable host1x, and the HDMI output. Harmony also has a DVI port with an
HDMI form-factor connector, driven by Tegra's LVDS output. This isn't
enabled yet, due to potential issues with having multiple outputs enabled.

Correct DDC I2C frequency to 100KHz.

Add dummy/fixed regulators to satisfy the HDMI driver.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
[swarren: add commit description, remove enable of DVI port]
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-16 09:14:40 -07:00
Stephen Warren
20ffbd7d6b ARM: tegra: harmony: enable HDMI port
Enable host1x, and the HDMI output. Harmony also has an optional LCD,
and a VGA output. The former isn't enabled due to potential issues with
having multiple outputs enabled. The latter isn't enabled since the
driver doesn't support VGA yet anyway.

Correct DDC I2C frequency to 100KHz.

Based on work by Thierry Reding for TrimSlice.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-16 09:14:26 -07:00
Arnd Bergmann
bac2f66886 ARM i.MX dt updates for 3.8
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABCAAGBQJQpmDiAAoJEPFlmONMx+ezSJMP/Az4J4R6ZEh8J8xt/Uf4bw78
 k6jMg1cBRa/DRJWUWvymjyFH/NvjnbtntV4bOBbey05efB+RCGRl9TW6hGLtL5M6
 EfA2Nr7flw/BCdEuf0uI64p0rWmtfzV+SZOsPk6HKAzHo2uV/hQWYUUmvzNrVqVz
 8XVEfTQWgipA8SOPKfdvCezoO7PWHD6l9fy/mJkMyyf4Py1WDXXt+gCHUGZlFKAq
 8ZXE3B+ftwDUOwlrLl7mcJJtRjabUHQpDS/hmkhjVzTrrMQb+V2/BIzODkT35B6m
 bHc5zRlYVXVgE/XqxcD79zzl+ixvyfdYThLQ8GzoxyhUmKNOEjub+8udzX2YEB+b
 VLS06QmhhJn8xj6EIVM5WZIK4bR2OZoT2hCpuO2nJUyhbVSksO1GF1T8v8H3IHQf
 THw3WSh7bFIFrgJhj//UbLXkTaQ4/bkqAP064EyuABMvKoaybPOmFe0boN/QoFDz
 yC2/b1xTTiG/6nLupz7gLJabdV6iOF9f2rqta65hz+//Qk+Iyeh7iuWfrBspDJCb
 3vKBcB75IgRWaaPxJxRFWzP9CN2ouv5q763xSjqldFt9pOF4zvfBfpERkzYn3rwG
 /93X1tazBLo+mM7D5QVTrPgfXQs/B3GxIA6tsIIrPqxMpM5u/ONNNCYwINvFI/Xo
 aklrgV6n88q3C/Zewebz
 =CFfP
 -----END PGP SIGNATURE-----

Merge tag 'imx-dt' of git://git.pengutronix.de/git/imx/linux-2.6 into next/dt

From Sascha Hauer <s.hauer@pengutronix.de>:

ARM i.MX dt updates for 3.8

* tag 'imx-dt' of git://git.pengutronix.de/git/imx/linux-2.6:
  Add device tree file for the armadeus apf27
  ARM i.MX: Add Ka-Ro TX25 devicetree
  ARM i.MX25: Add devicetree
  ARM i.MX25: Add devicetree support
  ARM i.MX25: Add missing clock gates

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-11-16 17:11:46 +01:00
Arnd Bergmann
db2f95de7e ARM i.MX SoC updates
based on imx-multiplatform branch.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABCAAGBQJQpl+aAAoJEPFlmONMx+ezgLAP/jCDFrwx4/cjJdDwidVYM694
 O84zaTPiAySoipII0NDBhbECVwWkg81uFdD/vskTwRHsQ4GmWi3qHJErpnR32yNR
 B9ef+4w4O01YYB7hEXLuDRo5CA4pXehUxWMwAdaWLxjaF2Bttc8B+kqrJ0IFLyIx
 A2VncWXj2Vj5wViEUbm/cKGISqlSVyhT7QKvDaRIxzdmU0A92eD5FGVCK/s4NUda
 pQFzwHS6WT53jYW88t34B63Ix9D0XVX9O0EF9gGEPxUQHyG0t4bNt2K3kN3l9ZKY
 mvzrtVoN+Kg0/z5BD7R8BmNNt1R8m2spmRKcsKP4h/G9IIqFnkwY9lPI5ZdnBk/H
 7sx8bV/FTh0DEM9o0LfPk2bbRD+oDu+TP0aRXxe2ApPo5FQI4K35w89IYuDxTws5
 gDUcSXcZdYbcL66QJ3BBlVDYwDlF+M5eGRavZPlRmK9MXKeDfmg07REXKe3brGgp
 GAmxcH/lAsvpmsYEMXPFBNYnJWBKW5PesGXEa+idWURnFwCqC8x0NSMABB5xX+18
 k7yGqntyD+usb7QRttvqvbKBIol/aD7jnVMgPDMzSfozKLjSzhNT0HJ71kVw8FWY
 FIsYqjHZW5cFTDTrn3os/KPDNnk47qIsHWWhUvyeJsm9qkbuj8CjVfjIApj1ocDp
 bsYnXqRiVSfrDdm6JrUc
 =P3UZ
 -----END PGP SIGNATURE-----

Merge tag 'imx-soc' of git://git.pengutronix.de/git/imx/linux-2.6 into next/soc

From Sascha Hauer <s.hauer@pengutronix.de>:

ARM i.MX SoC updates

based on imx-multiplatform branch.

* tag 'imx-soc' of git://git.pengutronix.de/git/imx/linux-2.6:
  ARM i.MX51 babbage: Add display support
  ARM i.MX6: Add IPU support
  ARM i.MX51: Add IPU support
  ARM i.MX53: Add IPU support
  ARM i.MX5: switch IPU clk support to devicetree bindings
  ARM i.MX6: fix ldb_di_sel mux
  ARM i.MX51: setup MIPI during startup
  mx2_camera: Fix regression caused by clock conversion
  ARM: clk-imx27: Add missing clock for mx2-camera
  ARM i.MX27: Fix low reference clock path
  ARM: dts: imx27-3ds: Remove local watchdog inclusion
  watchdog: Support imx watchdog on SOC_IMX53
  ARM: mach-imx: Support for DryIce RTC in i.MX53
  ARM : i.MX27 : split code for allocation of ressources of camera and eMMA

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-11-16 16:59:17 +01:00
Sascha Hauer
d6aef84a48 ARM i.MX51 babbage: Add display support
The babbage board has a DVI-I output which allows to output analog
and digital signals simultaneously. This patch adds support for it
to the devicetree. The DDC signals are not wired up on the board, so
DRM will fall back on default VESA modes.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-16 16:34:18 +01:00
Sascha Hauer
91660d743e ARM i.MX6: Add IPU support
This adds the IPU devices to the devicetree.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-16 16:33:49 +01:00
Sascha Hauer
b5af6b100c ARM i.MX51: Add IPU support
This adds the IPU device to the devicetree along with the necessary pinctrl
settings for the parallel display outputs.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-16 16:33:42 +01:00
Sascha Hauer
abed9a6bf2 ARM i.MX53: Add IPU support
This adds the IPU device to the devicetree.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-16 16:33:37 +01:00
Fabio Estevam
9b49e170c0 ARM: dts: imx27-3ds: Remove local watchdog inclusion
imx27.dtsi already register the watchdog, so no need to do it in the board dts
file.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-11-16 16:21:48 +01:00
Sascha Hauer
89a4150331 Merge remote-tracking branch 'arm-soc/imx/multiplatform' into x 2012-11-16 16:21:27 +01:00
Fabio Porcedda
824b43968f ARM: at91/dts: evk-pro3: enable watchdog
Tested on evk-pro3.

Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-11-16 15:48:48 +01:00
Fabio Porcedda
7492e7ca0f ARM: at91/dts: add at91sam9_wdt driver to at91sam926x, at91sam9g45
Tested on an at91sam9260 board (evk-pro3).

Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-11-16 15:48:41 +01:00
Maxime Ripard
06e9eff129 ARM: dts: cfa10049: Add the i2c muxer buses to the CFA-10049
This will allow to add the 3 Nuvoton NAU7802 ADCs and the NXP PCA9555
GPIO expander eventually.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-11-16 15:08:12 +01:00
Fabio Porcedda
8cf70f3dc0 ARM: at91: dt: evk-pro3: enable uart0 and uart2
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-11-16 14:36:04 +01:00
Huang Shijie
77a807dceb ARM: dts: enable dma support for auart0 in mx28
enable the dma support for auart0 in mx28.

Signed-off-by: Huang Shijie <b32955@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-16 04:42:46 -08:00
Thomas Petazzoni
9f32cccc67 arm: mvebu: enable Ethernet controllers on Mirabox platform
The Globalscale Mirabox platform has two Ethernet interfaces,
connected to the SoC with a RGMII interface.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2012-11-16 10:17:48 +01:00
Thomas Petazzoni
f69c92f4fe arm: mvebu: enable Ethernet controllers on OpenBlocks AX3-4 platform
The PlatHome OpenBlocks AX3-4 platform has 4 Ethernet ports, connected
to a single quad-port PHY through SGMII.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2012-11-16 10:17:46 +01:00
Thomas Petazzoni
f01959a96f arm: mvebu: enable Ethernet controllers on Armada 370/XP eval boards
This patch enables the two network interfaces of the Armada 370
official Marvell evaluation platform, and the four network interfaces
of the Armada XP official Marvell evaluation platform.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2012-11-16 10:17:44 +01:00
Thomas Petazzoni
323c10101f arm: mvebu: add Ethernet controllers using mvneta driver for Armada 370/XP
The Armada 370 SoC has two network units, while the Armada XP has four
network units. The first two network units are common to both the
Armada XP and Armada 370, so they are added to armada-370-xp.dtsi,
while the other two network units are specific to the Armada XP and
therefore added to armada-xp.dtsi.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2012-11-16 10:17:41 +01:00
Philippe Reynes
632506a21a Add device tree file for the armadeus apf27
Signed-off-by: Philippe Reynes <tremyfr@yahoo.fr>
Signed-off-by: Eric Jarrige <eric.jarrige@armadeus.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-11-16 09:12:00 +01:00
Sascha Hauer
7b7d672734 ARM i.MX dts: Consistently add labels to devicenodes
Having labels before each node allows board bindings to reference
to nodes by using the &nodename {} notation. This way boards do not
have to resemble the whole devicetree layout. Due to less indention
needed the board files also get better readability. Since the label
make the documentation behind the nodes unnecessary it is removed.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-16 14:18:53 +08:00
Liu Ying
82c4570574 ARM: dts: imx6q-sabresd: add volume up/down gpio keys
Add volume up/down gpio keys support in imx6q-sabresd.dts.

Signed-off-by: Liu Ying <Ying.Liu@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-16 14:18:53 +08:00
Roland Stigge
a1fff236b4 ARM: dts: imx53: pinctl update
This patch supplements pinctl support on i.MX53.

Signed-off-by: Roland Stigge <stigge@antcom.de>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-16 14:18:53 +08:00
Shawn Guo
d90df97863 ARM: imx: enable cpufreq for imx6q
It enables cpufreq support for imx6q with generic cpufreq-cpu0 driver.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-16 14:18:53 +08:00
Shawn Guo
c92503886c ARM: dts: imx6q: enable snvs lp rtc
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-16 14:18:52 +08:00
Fabio Estevam
5c70cb01b8 ARM: dts: imx6q-sabreauto: Add basic support
mx6qsabreauto is a board based on mx6q SoC with the following features:
- 2GB of DDR3
- 2 USB ports
- 1 HDMI output port
- SPI NOR
- 2 LVDS LCD ports
- Gigabit Ethernet
- Camera
- eMMC and SD card slot
- Multichannel Audio
- CAN
- SATA
- NAND
- PCIE
- Video Input

Add very basic support for it.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-16 14:18:52 +08:00
Fabio Estevam
2a32467135 ARM: dts: imx53-qsb: Make DA9053 regulator functional
Setup the GPIO7_11 pin as interrupt to the DA9053 and also rename the regulator nodes
so that they match with the datasheet.

This allows probing of DA9053 to succeed.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-16 14:18:52 +08:00
Fabio Estevam
e9dc615c50 ARM: dts: imx53-qsb: Use pinctrl for gpio-led
Since commit 8fe4554f (leds: leds-gpio: adopt pinctrl support) gpio-led driver
has pinctrl support, so setup the gpio led pin via pinctrl and avoid the
following warning:

leds-gpio leds.2: pins are not configured from the driver

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-16 14:18:51 +08:00
Sascha Hauer
c104b6a2ed ARM i.MX dtsi: Add default bus-width property for esdhc controller
According to Documentation/devicetree/bindings/mmc/mmc.txt bus-width
is a mandatory property. While this is currently enforced nowhere, it's
a good habit to just add the property now to allow to add common helper
functionality for the mmc property parsing later.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-16 14:18:51 +08:00
Bo Shen
531f67e41d ASoC: at91sam9g20ek-wm8731: convert to dt support
convert at91sam9g20ek with wm8731 to device tree support

Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-16 10:27:27 +09:00
Thierry Reding
ed39097c2a ARM: tegra: Add Tegra30 host1x support
Add the host1x node along with its children to the Tegra30 DTSI. Board-
specific DTS files are expected to enable the available outputs and
complement the device tree with data specific to the hardware.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-15 15:07:31 -07:00
Thierry Reding
ed821f0709 ARM: tegra: Add Tegra20 host1x support
Add the host1x node along with its children to the Tegra20 DTSI. Board-
specific DTS files are expected to enable the available outputs and
complement the device tree with data specific to the hardware.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-15 15:07:30 -07:00
Stephen Warren
fea221e254 ARM: tegra: trimslice: enable SPI flash
TrimSlice contains a 1MiB SPI flash. Represent this in the device tree.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-15 15:07:30 -07:00
Laxman Dewangan
fa98a114bf ARM: tegra: dts: add sflash controller dt entry
Nvidia's Tegra20 have the SPI (SFLASH) controller to
interface with spi flash device which is used for system
boot. Add DT entry for this controller.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
[swarren: move sflash node to keep file sorted]
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-15 15:07:30 -07:00
Thierry Reding
ee9f726040 ARM: tegra: ventana: Add NCT1008 temperature sensor
The Harmony board has an ON Semiconductors NCT1008 temperature sensor
connected to the DVC bus. It can be used to monitor the ambient (local)
and on-die (remote) temperatures.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Tested-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-15 15:07:30 -07:00
Thierry Reding
840a40807f ARM: tegra: tamonten: Add NCT1008 temperature sensor
The Tamonten SOM has an ON Semiconductor NCT1008 connected to the DVC
bus which is used to measure the ambient (local) temperature as well as
the on-die (remote) temperature.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-15 15:07:29 -07:00
Thierry Reding
42d2534a92 ARM: tegra: harmony: Add ADT7641 temperature sensor
The Harmony board has an Analog Devices ADT7461 temperature sensor
connected to the DVC bus. It can be used to monitor the ambient (local)
and on-die (remote) temperatures.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Tested-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-15 15:07:29 -07:00
Thierry Reding
b28113e249 ARM: tegra: tec: Remove redundant DT properties
These properties are already set by the tegra20-tamonten.dtsi, so they
don't need to be repeated.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-15 15:07:29 -07:00
Thierry Reding
ec31990372 ARM: tegra: tamonten: Add DDC/PTA pinmux
This commit allows the I2C2 controller on Tegra20 to be routed either to
the DDC or the PTA pin group at runtime. On Tamonten this allows the I2C
bus to be used for the DDC of the HDMI connector or to access I2C chips
on the carrier board.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-15 15:07:29 -07:00
Laxman Dewangan
c42cb1c379 ARM: tegra: dts: cardhu: enable SLINK4
Enable SLINK4 and connected device in Tegra30 based
platform Cardhu.
Setting maximum spi frequency to 25MHz.

SPI serial flash is connected on CS1 of SLINK4 on
cardhu platform.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
[swarren: swapped reg/compatible order to be consistent]
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-15 15:07:29 -07:00
Laxman Dewangan
a86b0db3c0 ARM: tegra: dts: add slink controller dt entry
Add slink controller details in the dts file of
Tegra20 and Tegra30.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-15 15:07:29 -07:00
Mark Zhang
cf63346401 ARM: dt: tegra: ventana: define pinmux for ddc
Tegra 2's I2C2 controller can be routed to either the PTA
or DDC pin group on Ventana. So:
- Remove the HDMI function definition of pta pingroup
- Define child i2c adapters(ddc & pta) for I2C2 controller

Signed-off-by: Mark Zhang <markz@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-15 15:07:28 -07:00
Wei Ni
6fb11131ef ARM: dt: t30 cardhu: set pinmux and power for wlan
Configure pinmux as required for WiFi.
Enable the SDHCI1 controller for a02 and a04 board, which is connected to the
WiFi module.
For now, always enable the regulator that provides power to the Wifi module.

Signed-off-by: Wei Ni <wni@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-15 15:07:28 -07:00
Wei Ni
c729429e0c ARM: dt: t20 ventana: set pinmux and power for wlan
Configure pinmux as required for WiFi.
Enable the SDHCI1 controller, which is connectted to the WiFi module.

Signed-off-by: Wei Ni <wni@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-15 15:07:28 -07:00
Wei Ni
da2fc651e4 ARM: dt: t20 seaboard: turn on the power for wlan
Enable the SDHCI1 controller. This is connected to the WiFi module.

Signed-off-by: Wei Ni <wni@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-15 15:07:28 -07:00
Arnd Bergmann
b599dc078a Device tree related changes for omaps updating the
various .dts files, and timer related changes to allow
 configuring the timer via device tree.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJQoYD5AAoJEBvUPslcq6VzHtAP/1mzXjyRJX9NDh3S7ueO4njz
 guCeaTIBjYwXBSASpfhWLOgFWLE4YGpAZstp+ZLHkzh8EN/yV5ZkodoJo3wYnwma
 V3qkj9oLONqCTkuXr3Gxhl/xLR4Q/WfJItIw0Ok4v12n1NRMoeKvQIpYznO+klAk
 i6ztZNfr+v6+EbFcjUW4kxXKjssW2MySAEW1/x1vQSdffMnIvioVjthD16lER+A3
 fHkhSSmHkUH9UdZiclzuZd3N+/J8YX8Q2yUWI8wHeVuCgnn3QFRZ3p9ngCd6a5lm
 jIbzazJq5gJjidBkSPef6CeNt6nbj0MmtPePxniMeW/cLdbQcibzhAlW5KWZ71+Q
 rD1WlcR5jrUdzSIG3UjvhGRFN0LcegVJvMgqM5h5IYbZETLA/Gcp2gszyYKovU3B
 tHEXEmwhSciM5PC/x2o1cZGqdf2sCl5i+5esI+sbJxI4GjtLkJiFNoBgjrek9anu
 dTqIK1/AlKIQGbDPAmAJXjKKM8hq+3r/PWzRUipXxORlArT1uRI8SzvR76mISAwL
 kCSKPCwwbY3DDozTwSFPynZpFgkZHI0rW00poBNpG7ev18IFUJinSHeY1Jqssgfb
 1XguV4Txc1IrlICk+bi+Y7bogoeWjXl3cIvWkdAkZKWF75Irh4zZSRyI5+DWN8Bi
 stnGo1JUqE1K7j4HEIHi
 =59qq
 -----END PGP SIGNATURE-----

Merge tag 'omap-for-v3.8/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt
From Tony Lindgren <tony@atomide.com>:

Device tree related changes for omaps updating the
various .dts files, and timer related changes to allow
configuring the timer via device tree.

* tag 'omap-for-v3.8/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (48 commits)
  usb: musb: dsps: dt binding - add resources, example
  ARM: dts: omap4-sdp: Add pinmux configuration for HDMI
  ARM: dts: omap4-panda: Add pinmux configuration for HDMI
  ARM: dts: Makefile: Add the am335x-evmsk target in dtbs list
  ARM: dts: AM33XX: Add usbss node
  ARM: dts: AM33XX: Add push-buttons device tree data to am335x-evmsk
  ARM: dts: AM33XX: Add pinmux configuration for gpio-keys to EVMSK
  ARM: dts: AM33XX: Add user-leds device tree data to am335x-evmsk
  ARM: dts: AM33XX: Add pinmux configuration for gpio-leds to EVMSK
  ARM: dts: AM33XX: Add user-leds device tree data to am335x-bone
  ARM: dts: AM33XX: Add pinmux configuration for user-leds to BONE
  ARM: dts: AM33XX: Add volume-keys device tree data to am335x-evm
  ARM: dts: AM33XX: Add pinmux configuration for volume-keys to EVM
  ARM: dts: AM33XX: Add matrix keypad device tree data to am335x-evm
  ARM: dts: AM33XX: Add pinmux configuration for matrix keypad to EVM
  ARM: dts: omap5-evm: LPDDR2 memory device details for EVM
  ARM: dts: omap5: EMIF device tree data for OMAP5 boards
  ARM: dts: omap5-evm: Fix size of memory defined for EVM
  ARM: OMAP2+: Add device-tree support for 32kHz counter
  ARM: OMAP: Add DT support for timer driver
  ...

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-11-15 17:10:24 +01:00
Jean-Christophe PLAGNIOL-VILLARD
6d7b42a447 mtd: fsmc_nand: pass the ale and cmd resource via resource
Do not use the platform_data to pass resource and be smart in the drivers.
Just pass it via resource

Switch to devm_request_and_ioremap at the sametime

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-By: Vipin Kumar <vipin.kumar@st.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-11-15 15:37:47 +02:00
hongbo.zhang
dc1956b5f8 Thermal: Add ST-Ericsson DB8500 thermal properties and platform data.
This patch adds device tree properties for ST-Ericsson DB8500 thermal driver,
also adds the platform data to support the old fashion.

Signed-off-by: hongbo.zhang <hongbo.zhang@linaro.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2012-11-15 20:51:02 +08:00
Mugunthan V N
1a39a65cba arm/dts: am33xx: Add CPSW and MDIO module nodes for AM33XX
Add CPSW and MDIO related device tree data for AM33XX.
Also enable them into board/evm dts files by providing
respective phy-id.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Cc: Benoit Cousson <b-cousson@ti.com>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-14 22:09:07 -05:00
Thomas Petazzoni
92ece1cdd2 arm: mvebu: fix compatible string in armada-370-xp.dtsi
All the Device Tree files for Armada 370 and XP SoCs and boards use
the "armada-370-xp" common compatible string, except
armada-370-xp.dtsi which was specifying "armada_370_xp".

Fix this inconsistency by making armada-370-xp.dtsi declare a
compatible string of "armada-370-xp" like everyone else.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2012-11-14 16:35:00 +01:00
Gregory CLEMENT
e3e37bcab9 arm: mvebu: support for the Globalscale Mirabox board
This platform, available from Globalscale has an Armada 370. For now,
only the serial port is supported. Support for network, USB and other
peripherals will be added as drivers for them become available for
Armada 370 in mainline.

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
This is 3.8 material.

Changes from original version posted by Gregory:
 * Renamed .dts file to armada-370-mirabox.dts
 * Change compatible string to 'globalscale,mirabox'
 * Remove compatible string from armada-370-xp.c
 * Removed references to MBX0001
2012-11-14 16:32:29 +01:00
Thomas Petazzoni
19b85c0860 arm: mvebu: support for the PlatHome OpenBlocks AX3-4 board
This platform, available in Japan from PlatHome, has a dual-core
Armada XP, the MV78260. For now, only the two serial ports and the
three front LEDs are supported. Support for SMP, network, SATA, USB
and other peripherals will be added as drivers for them become
available for Armada XP in mainline.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

---
This is 3.8 material.

Changes since v2:

 * Renamed the .dts file to armada-xp-openblocks-ax3-4.dts

 * Removed the compatible string from armada-370-xp.c (which now only
   lists the common SoC compatible string)

Changes since v1:

 * Renamed the board to OpenBlocks AX3-4, since there is a variant
   called AX3-2 which has less RAM, and no mini PCIe port. Requested
   by Andrew Lunn.

 * Fix the amount of memory to 3 GB. In fact, the board has 1 GB
   soldered, and 2 GB in a SODIMM slot (which is therefore
   removable). But as the board is delivered as is, we'll assume it
   has 3 GB of memory by default.
2012-11-14 16:32:24 +01:00
Josh Cartwright
91dc985c5e ARM: zynq: add clk binding support to the ttc
Add support for retrieving TTC configuration from device tree.  This
includes the ability to pull information about the driving clocks from
the of_clk bindings.

Signed-off-by: Josh Cartwright <josh.cartwright@ni.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
2012-11-14 16:10:42 +01:00
Josh Cartwright
0f586fbf6f ARM: zynq: use zynq clk bindings
Make the Zynq platform use the newly created zynq clk bindings.

Signed-off-by: Josh Cartwright <josh.cartwright@ni.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
2012-11-14 16:10:32 +01:00
Alban Bedel
b7d41c937e ARM: LPC32xx: Add the motor PWM to base dts file
Signed-off-by: Alban Bedel <alban.bedel@avionic-design.de>
Signed-off-by: Roland Stigge <stigge@antcom.de>
2012-11-14 15:41:18 +01:00
Fabio Estevam
2d4d07b97c ARM: boot: Fix usage of kecho
Since commit edc88ceb0 (ARM: be really quiet when building with 'make -s') the
following output is generated when building a kernel for ARM:

echo '  Kernel: arch/arm/boot/Image is ready'
  Kernel: arch/arm/boot/Image is ready
  Building modules, stage 2.
echo '  Kernel: arch/arm/boot/zImage is ready'
  Kernel: arch/arm/boot/zImage is ready

As per Documentation/kbuild/makefiles.txt the correct way of using kecho is
'@$(kecho)'.

Make this change so no more unwanted 'echo' messages are displayed.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-11-12 23:22:54 +01:00
Arnd Bergmann
b90acac0f4 Merge branches 'devel/debug_ll_init' and 'calxeda/ecx-2000' into next/soc2
Dependencies for highbank debug_ll_init patch
2012-11-12 23:02:45 +01:00
Arnd Bergmann
889cf721d7 Merge branch 'next/boards2' into next/soc2
Dependency for more Renesas soc changes

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-11-12 22:11:56 +01:00
Arnd Bergmann
fd2e1dd7bb Merge branches 'depends/asoc', 'renesas/boards' and 'renesas/soc' into next/boards2
These are all dependencies for the renesas/boards2 branch.

Conflicts:
	arch/arm/configs/marzen_defconfig
2012-11-12 21:57:52 +01:00
Josh Cartwright
e06f1a9ed7 ARM: zynq: dts: split up device tree
The purpose of the created zynq-7000.dtsi file is to describe the
hardware common to all Zynq 7000-based boards.  Also, get rid of the
zynq-ep107 device tree, since it is not hardware anyone can purchase.

Add a zc702 dts file based on the zynq-7000.dtsi.  Add it to the
dts/Makefile so it is built with the 'dtbs' target.

Signed-off-by: Josh Cartwright <josh.cartwright@ni.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
2012-11-12 13:24:48 +01:00
Sascha Hauer
62300cbf98 ARM i.MX: Add Ka-Ro TX25 devicetree
Basic support for the Ka-Ro i.MX25 based TX25 board.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Lothar Waßmann <LW@KARO-electronics.de>
2012-11-12 12:11:27 +01:00
Sascha Hauer
5658a68fb5 ARM i.MX25: Add devicetree
This adds a i.MX25 dtsi file along with the i.MX25 clock tree
documentation. The devicetree should be fairly complete for:

- uart
- fec
- i2c
- spi
- pwm
- nand
- gpio
- wdog
- esdhc
- flexcan

The more exotic devices currently miss clock bindings.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-12 12:11:23 +01:00