Commit Graph

1123733 Commits

Author SHA1 Message Date
Tiezhu Yang
8a34228eb3 LoongArch: Move {signed,unsigned}_imm_check() to inst.h
{signed,unsigned}_imm_check() will also be used in the bpf jit, so move
them from module.c to inst.h, this is preparation for later patches.

Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-10-12 16:36:19 +08:00
Youling Tang
4e62d1d865 LoongArch: Add kdump support
This patch adds support for kdump. In kdump case the normal kernel will
reserve a region for the crash kernel and jump there on panic.

Arch-specific functions are added to allow for implementing a crash dump
file interface, /proc/vmcore, which can be viewed as a ELF file.

A user-space tool, such as kexec-tools, is responsible for allocating a
separate region for the core's ELF header within the crash kdump kernel
memory and filling it in when executing kexec_load().

Then, its location will be advertised to the crash dump kernel via a
command line argument "elfcorehdr=", and the crash dump kernel will
preserve this region for later use with arch_reserve_vmcore() at boot
time.

At the same time, the crash kdump kernel is also limited within the
"crashkernel" area via a command line argument "mem=", so as not to
destroy the original kernel dump data.

In the crash dump kernel environment, /proc/vmcore is used to access the
primary kernel's memory with copy_oldmem_page().

I tested kdump on LoongArch machines (Loongson-3A5000) and it works as
expected (suggested crashkernel parameter is "crashkernel=512M@2560M"),
you may test it by triggering a crash through /proc/sysrq-trigger:

 $ sudo kexec -p /boot/vmlinux-kdump --reuse-cmdline --append="nr_cpus=1"
 # echo c > /proc/sysrq-trigger

Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-10-12 16:36:19 +08:00
Youling Tang
4a03b2ac06 LoongArch: Add kexec support
Add three new files, kexec.h, machine_kexec.c and relocate_kernel.S to
the LoongArch architecture, so as to add support for the kexec re-boot
mechanism (CONFIG_KEXEC) on LoongArch platforms.

Kexec supports loading vmlinux.elf in ELF format and vmlinux.efi in PE
format.

I tested kexec on LoongArch machines (Loongson-3A5000) and it works as
expected:

 $ sudo kexec -l /boot/vmlinux.efi --reuse-cmdline
 $ sudo kexec -e

Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-10-12 16:36:19 +08:00
Youling Tang
2d2c395217 LoongArch: Use generic BUG() handler
Inspired by commit 9fb7410f955("arm64/BUG: Use BRK instruction for
generic BUG traps"), do similar for LoongArch to use generic BUG()
handler.

This patch uses the BREAK software breakpoint instruction to generate
a trap instead, similarly to most other arches, with the generic BUG
code generating the dmesg boilerplate.

This allows bug metadata to be moved to a separate table and reduces
the amount of inline code at BUG() and WARN() sites. This also avoids
clobbering any registers before they can be dumped.

To mitigate the size of the bug table further, this patch makes use of
the existing infrastructure for encoding addresses within the bug table
as 32-bit relative pointers instead of absolute pointers.

(Note: this limits the max kernel size to 2GB.)

Before patch:
[ 3018.338013] lkdtm: Performing direct entry BUG
[ 3018.342445] Kernel bug detected[#5]:
[ 3018.345992] CPU: 2 PID: 865 Comm: cat Tainted: G D 6.0.0-rc6+ #35

After patch:
[  125.585985] lkdtm: Performing direct entry BUG
[  125.590433] ------------[ cut here ]------------
[  125.595020] kernel BUG at drivers/misc/lkdtm/bugs.c:78!
[  125.600211] Oops - BUG[#1]:
[  125.602980] CPU: 3 PID: 410 Comm: cat Not tainted 6.0.0-rc6+ #36

Out-of-line file/line data information obtained compared to before.

Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-10-12 16:36:19 +08:00
Huacai Chen
dea2df3cc7 LoongArch: Add SysRq-x (TLB Dump) support
Add SysRq-x (TLB Dump) support for LoongArch, which is useful for
debugging.

Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-10-12 16:36:14 +08:00
Huacai Chen
b37042b2bb LoongArch: Add perf events support
The perf events infrastructure of LoongArch is very similar to old MIPS-
based Loongson, so most of the codes are derived from MIPS.

Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-10-12 16:36:14 +08:00
Huacai Chen
5f1e001be5 LoongArch: Add qspinlock support
On NUMA system, the performance of qspinlock is better than generic
spinlock. Below is the UnixBench test results on a 8 nodes (4 cores
per node, 32 cores in total) machine.

A. With generic spinlock:

System Benchmarks Index Values               BASELINE       RESULT    INDEX
Dhrystone 2 using register variables         116700.0  449574022.5  38523.9
Double-Precision Whetstone                       55.0      85190.4  15489.2
Execl Throughput                                 43.0      14696.2   3417.7
File Copy 1024 bufsize 2000 maxblocks          3960.0     143157.8    361.5
File Copy 256 bufsize 500 maxblocks            1655.0      37631.8    227.4
File Copy 4096 bufsize 8000 maxblocks          5800.0     444814.2    766.9
Pipe Throughput                               12440.0    5047490.7   4057.5
Pipe-based Context Switching                   4000.0    2021545.7   5053.9
Process Creation                                126.0      23829.8   1891.3
Shell Scripts (1 concurrent)                     42.4      33756.7   7961.5
Shell Scripts (8 concurrent)                      6.0       4062.9   6771.5
System Call Overhead                          15000.0    2479748.6   1653.2
                                                                   ========
System Benchmarks Index Score                                        2955.6

B. With qspinlock:

System Benchmarks Index Values               BASELINE       RESULT    INDEX
Dhrystone 2 using register variables         116700.0  449467876.9  38514.8
Double-Precision Whetstone                       55.0      85174.6  15486.3
Execl Throughput                                 43.0      14769.1   3434.7
File Copy 1024 bufsize 2000 maxblocks          3960.0     146150.5    369.1
File Copy 256 bufsize 500 maxblocks            1655.0      37496.8    226.6
File Copy 4096 bufsize 8000 maxblocks          5800.0     447527.0    771.6
Pipe Throughput                               12440.0    5175989.2   4160.8
Pipe-based Context Switching                   4000.0    2207747.8   5519.4
Process Creation                                126.0      25125.5   1994.1
Shell Scripts (1 concurrent)                     42.4      33461.2   7891.8
Shell Scripts (8 concurrent)                      6.0       4024.7   6707.8
System Call Overhead                          15000.0    2917278.6   1944.9
                                                                   ========
System Benchmarks Index Score                                        3040.1

Signed-off-by: Rui Wang <wangrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-10-12 16:36:14 +08:00
Huacai Chen
d279134168 LoongArch: Use TLB for ioremap()
We can support more cache attributes (e.g., CC, SUC and WUC) and page
protection when we use TLB for ioremap(). The implementation is based
on GENERIC_IOREMAP.

The existing simple ioremap() implementation has better performance so
we keep it and introduce ARCH_IOREMAP to control the selection.

We move pagetable_init() earlier to make early ioremap() works, and we
modify the PCI ecam mapping because the TLB-based version of ioremap()
will actually take the size into account.

Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-10-12 16:36:14 +08:00
Huacai Chen
235d074fdc LoongArch: Support access filter to /dev/mem interface
Accidental access to /dev/mem is obviously disastrous, but specific
access can be used by people debugging the kernel. So select GENERIC_
LIB_DEVMEM_IS_ALLOWED, as well as define ARCH_HAS_VALID_PHYS_ADDR_RANGE
and related helpers, to support access filter to /dev/mem interface.

Signed-off-by: Weihao Li <liweihao@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-10-12 16:36:14 +08:00
Huacai Chen
b61a40afca LoongArch: Refactor cache probe and flush methods
Current cache probe and flush methods have some drawbacks:
1, Assume there are 3 cache levels and only 3 levels;
2, Assume L1 = I + D, L2 = V, L3 = S, V is exclusive, S is inclusive.

However, the fact is I + D, I + D + V, I + D + S and I + D + V + S are
all valid. So, refactor the cache probe and flush methods to adapt more
types of cache hierarchy.

Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-10-12 16:36:14 +08:00
Rui Wang
a2a84e3633 LoongArch: mm: Refactor TLB exception handlers
This patch simplifies TLB load, store and modify exception handlers:

1. Reduce instructions, such as alu/csr and memory access;
2. Execute tlb search instruction only in the fast path;
3. Return directly from the fast path for both normal and huge pages;
4. Re-tab the assembly for better vertical alignment.

And fixes the concurrent modification issue of fast path for huge pages.

This issue will occur in the following steps:

   CPU-1 (In TLB exception)         CPU-2 (In THP splitting)
1: Load PMD entry (HUGE=1)
2: Goto huge path
3:                                  Store PMD entry (HUGE=0)
4: Reload PMD entry (HUGE=0)
5: Fill TLB entry (PA is incorrect)

This patch also slightly improves the TLB processing performance:

* Normal pages: 2.15%, Huge pages: 1.70%.

  #include <stdio.h>
  #include <stdlib.h>
  #include <unistd.h>
  #include <sys/mman.h>

  int main(int argc, char *argv[])
  {
        size_t page_size;
        size_t mem_size;
        size_t off;
        void *base;
        int flags;
        int i;

        if (argc < 2) {
                fprintf(stderr, "%s MEM_SIZE [HUGE]\n", argv[0]);
                return -1;
        }

        page_size = sysconf(_SC_PAGESIZE);
        flags = MAP_PRIVATE | MAP_ANONYMOUS;
        mem_size = strtoul(argv[1], NULL, 10);
        if (argc > 2)
                flags |= MAP_HUGETLB;

        for (i = 0; i < 10; i++) {
                base = mmap(NULL, mem_size, PROT_READ, flags, -1, 0);
                if (base == MAP_FAILED) {
                        fprintf(stderr, "Map memory failed!\n");
                        return -1;
                }

                for (off = 0; off < mem_size; off += page_size)
                        *(volatile int *)(base + off);

                munmap(base, mem_size);
        }

        return 0;
  }

Signed-off-by: Rui Wang <wangrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-10-12 16:36:14 +08:00
Xi Ruoyao
59b3d4a9b0 LoongArch: Support R_LARCH_GOT_PC_{LO12,HI20} in modules
GCC >= 13 and GNU assembler >= 2.40 use these relocations to address
external symbols, so we need to add them.

Let the module loader emit GOT entries for data symbols so we would be
able to handle GOT relocations. The GOT entry is just the data's symbol
address.

In module.lds, emit a stub .got section for a section header entry. The
actual content of the section entry will be filled at runtime by module_
frob_arch_sections().

Tested-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-10-12 16:36:14 +08:00
Xi Ruoyao
9bd1e38032 LoongArch: Support PC-relative relocations in modules
Binutils >= 2.40 uses R_LARCH_B26 instead of R_LARCH_SOP_PUSH_PLT_PCREL,
and R_LARCH_PCALA* instead of R_LARCH_SOP_PUSH_PCREL.

Handle R_LARCH_B26 and R_LARCH_PCALA* in the module loader. For R_LARCH_
B26, also create a PLT entry as needed.

Tested-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-10-12 16:36:14 +08:00
Xi Ruoyao
0a75e5d1a1 LoongArch: Define ELF relocation types added in ABIv2.0
These relocation types are used by GNU binutils >= 2.40 and GCC >= 13.
Add their definitions so we will be able to use them in later patches.

Link: https://github.com/loongson/LoongArch-Documentation/pull/57
Tested-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-10-12 16:36:14 +08:00
Xi Ruoyao
11cd8a6483 LoongArch: Adjust symbol addressing for AS_HAS_EXPLICIT_RELOCS
If explicit relocation hints are used by the toolchain, -Wa,-mla-*
options will be useless for the C code. So only use them for the
!CONFIG_AS_HAS_EXPLICIT_RELOCS case.

Replace "la" with "la.pcrel" in head.S to keep the semantic consistent
with new and old toolchains for the low level startup code.

For per-CPU variables, the "address" of the symbol is actually an offset
from $r21. The value is near the loading address of main kernel image,
but far from the loading address of modules. So we use model("extreme")
attibute to tell the compiler that a PC-relative addressing with 32-bit
offset is not sufficient for local per-CPU variables.

The behavior with different assemblers and compilers are summarized in
the following table:

AS has            CC has
explicit relocs   explicit relocs * Behavior
==============================================================
No                No                Use la.* macros.
                                    No change from Linux 6.0.
--------------------------------------------------------------
No                Yes               Disable explicit relocs.
                                    No change from Linux 6.0.
--------------------------------------------------------------
Yes               No                Not supported.
--------------------------------------------------------------
Yes               Yes               Enable explicit relocs.
                                    No -Wa,-mla* options used.
==============================================================
*: We assume CC must have model attribute if it has explicit relocs.
   Both features are added in GCC 13 development cycle, so any GCC
   release >= 13 should be OK. Using early GCC 13 development snapshots
   may produce modules with unsupported relocations.

Link: https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=f09482a
Link: https://gcc.gnu.org/r13-1834
Link: https://gcc.gnu.org/r13-2199
Tested-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-10-12 16:36:08 +08:00
Xi Ruoyao
0d8dad7048 LoongArch: Add Kconfig option AS_HAS_EXPLICIT_RELOCS
GNU as >= 2.40 and GCC >= 13 will support using explicit relocation
hints in the assembly code, instead of la.* macros. The usage of
explicit relocation hints can improve code generation so it's enabled
by default by GCC >= 13.

Introduce a Kconfig option AS_HAS_EXPLICIT_RELOCS as the switch for
"use explicit relocation hints or not".

Tested-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-10-12 16:36:08 +08:00
Colin Ian King
9550dfde5e LoongArch: Kconfig: Fix spelling mistake "delibrately" -> "deliberately"
There is a spelling mistake in a commented section. Fix it.

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-10-12 16:36:08 +08:00
Huacai Chen
ddf502717d LoongArch: Mark __xchg() and __cmpxchg() as __always_inline
Commit ac7c3e4ff4 ("compiler: enable CONFIG_OPTIMIZE_INLINING
forcibly") allows compiler to uninline functions marked as 'inline'.
In case of __xchg()/__cmpxchg() this would cause to reference
BUILD_BUG(), which is an error case for catching bugs and will not
happen for correct code, if __xchg()/__cmpxchg() is inlined.

This bug can be produced with CONFIG_DEBUG_SECTION_MISMATCH enabled,
and the solution is similar to below commits:
46f1619500 ("MIPS: include: Mark __xchg as __always_inline"),
88356d0990 ("MIPS: include: Mark __cmpxchg as __always_inline").

Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-10-12 16:36:08 +08:00
Huacai Chen
1299a129a9 LoongArch: Flush TLB earlier at initialization
Move local_flush_tlb_all() earlier (just after setup_ptwalker() and
before page allocation). This can avoid stale TLB entries misguiding
the later page allocation. Without this patch the second kernel of
kexec/kdump fails to boot SMP.

BTW, move output_pgtable_bits_defines() into tlb_init() since it has
nothing to do with tlb handler setup.

Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-10-12 16:36:08 +08:00
Tiezhu Yang
a522b7ad8e LoongArch: Do not create sysfs control file for io master CPUs
Now io master CPUs are not hotpluggable on LoongArch, but in the current
code only /sys/devices/system/cpu/cpu0/online is not created. Let us set
the hotpluggable field of all the io master CPUs as 0, then prevent to
create sysfs control file for all the io master CPUs which confuses some
user space tools. This is similar with commit 9cce844abf ("MIPS: CPU#0
is not hotpluggable").

Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-10-12 16:36:08 +08:00
Jianmin Lv
4b2edd3828 LoongArch: Fix cpu name after CPU-hotplug
Don't overwrite the SMBIOS-provided CPU name on coming back from CPU-
hotplug (including S3/S4) if it is already initialized.

Reviewed-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-10-12 16:36:08 +08:00
Huacai Chen
1625c8cba7 EFI updates for v6.1
- implement EFI boot support for LoongArch
 - implement generic EFI compressed boot support for arm64, RISC-V and
   LoongArch, none of which implement a decompressor today
 - measure the kernel command line into the TPM if measured boot is in
   effect
 - refactor the EFI stub code in order to isolate DT dependencies for
   architectures other than x86
 - avoid calling SetVirtualAddressMap() on arm64 if the configured size
   of the VA space guarantees that doing so is unnecessary
 - move some ARM specific code out of the generic EFI source files
 - unmap kernel code from the x86 mixed mode 1:1 page tables
 -----BEGIN PGP SIGNATURE-----
 
 iQGzBAABCgAdFiEE+9lifEBpyUIVN1cpw08iOZLZjyQFAmM5mfEACgkQw08iOZLZ
 jySnJwv9G2nBheSlK9bbWKvCpnDvVIExtlL+mg1wB64oxPrGiWRgjxeyA9+92bT0
 Y6jYfKbGOGKnxkEJQl19ik6C3JfEwtGm4SnOVp4+osFeDRB7lFemfcIYN5dqz111
 wkZA/Y15rnz3tZeGaXnq2jMoFuccQDXPJtOlqbdVqFQ5Py6YT92uMyuI079pN0T+
 GSu7VVOX+SBsv4nGaUKIpSVwAP0gXkS/7s7CTf47QiR2+j8WMTlQEYZVjOKZjMJZ
 /7hXY2/mduxnuVuT7cfx0mpZKEryUREJoBL5nDzjTnlhLb5X8cHKiaE1lx0aJ//G
 JYTR8lDklJZl/7RUw/IW/YodcKcofr3F36NMzWB5vzM+KHOOpv4qEZhoGnaXv94u
 auqhzYA83heaRjz7OISlk6kgFxdlIRE1VdrkEBXSlQeCQUv1woS+ZNVGYcKqgR0B
 48b31Ogm2A0pAuba89+U9lz/n33lhIDtYvJqLO6AAPLGiVacD9ZdapN5kMftVg/1
 SfhFqNzy
 =d8Ps
 -----END PGP SIGNATURE-----

Merge tag 'efi-next-for-v6.1' into loongarch-next

LoongArch architecture changes for 6.1 depend on the efi changes to
work, so merge them to create a base.
2022-10-03 22:08:38 +08:00
Linus Torvalds
4fe89d07dc Linux 6.0 2022-10-02 14:09:07 -07:00
Linus Torvalds
a962b54e16 Add missing DT bindings for STM32 and a resource leak fix for DaVinci
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEOZGx6rniZ1Gk92RdFA3kzBSgKbYFAmM5dQwACgkQFA3kzBSg
 KbZaLw/+KM4ITFAzE9JqCp51Mf/KIKI9LpnGie5yOB6aXogx8DHS9tpUAjS8AWql
 u8GDlyV0P2lek16pyJF0f/7bdMur5qKthLg8VY/cUDcejs+6BIkDasffH1UpMzM4
 ZnDq5FpuRlHjrFA8vAqTFJfd8kClRNgt8J6DvXx+n3jvM4zZdq/FuzIjbuTuDGMF
 yCaKBQoKAi0dlKz6lT25hrEsrgVgD7QXwwWKsAERV1GTfBVGY/MGXGBotTxuRRbw
 Dlc0Bb/SUlFJg6dXvY5Khh2obo4B676nx07M1Hh5iL3aYfcdeoKMsHDM0fAayWiL
 xdQvTsUxVrn7dSqPL1uWMfOohacmOhbi90llO/2isG2mu/+jW4rctk9ovYORgb8Q
 auK4xqHBI+XLin3+R3UFIO5csMZ7POKYUPljChEvKIUsMv0RdS8od+TCRFll8NFl
 OeJtlHZwt5HFwj7Jl7JZfHMXNFLWz0KM+QbggWOX6H2MpDWx19C1h3WhExae6Jfg
 omeQHE5EtIdzDK20vZcnEF3Clvz035PnHlD48TPQM+4cmw7Axq2R0HBklW0O18O+
 S6KTFbUVvxo6qIHr/rexirosPWc98cpSILxjesH9y+syuZPOiqMGuxtpEqqmxBWI
 gEYQy3sStnMCkJMHm2sojasMX7ce2UCExZpybY1Im0j3z+ipU7U=
 =k3of
 -----END PGP SIGNATURE-----

Merge tag 'i2c-for-6.0-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c fixes from Wolfram Sang:
 "Add missing DT bindings for STM32 and a resource leak fix for DaVinci"

* tag 'i2c-for-6.0-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: davinci: fix PM disable depth imbalance in davinci_i2c_probe
  dt-bindings: i2c: st,stm32-i2c: Document wakeup-source property
  dt-bindings: i2c: st,stm32-i2c: Document interrupt-names property
2022-10-02 10:00:45 -07:00
Linus Torvalds
febae48afe Misc fixes:
- Fix a PMU enumeration/initialization bug on Intel Alder Lake CPUs.
  - Fix KVM guest PEBS register handling.
  - Fix race/reentry bug in perf_output_read_group() reading of PMU counters.
 
 Signed-off-by: Ingo Molnar <mingo@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmM5bd8RHG1pbmdvQGtl
 cm5lbC5vcmcACgkQEnMQ0APhK1gMmw/+Nudwq3g/YcarTfoiBOTV0Ey9b8KEDjzU
 BKk/k/W8+3Qd4lU2u6DzXIVMcIyJM2SpgdagsvVdWAPjx/qgu//zuQKP8ai8uRww
 ipBDB+PU39hDPyJwOy3YLVEdnPqiMBvzaWcfb35R5p/ZA+Y7p/ituw9HwZ/jql5d
 C1rEcu9vjleY8Cs5dVLuvlz57VPq8VuHcYsnMGODo2WYdjX3CRNnfjWQyJFBQYJk
 f/4WYGLqcDeFHWZ92X527mxsKHBFCZFx8zxLHyhjfckPPGLOophAQkimg0X0TWrH
 HU2iNVQWV6BlCvirWnovR9jcPvmEjabl1BWd/1KCdR+L+AYTveYxd10nXCbQHIT2
 fT0T6m7TgPb4Resl8Jk33VuKFNaeNmdPrN0iKeEfFeIbT/p6+TAshhzBDbbhsrCB
 JVQx8Ri4kfbUSdiCsWLlreczslSYncfDvDrVB9WW8ngnv2VDwwKzJja/3Q2/hZH8
 RDd9DVLfT7l4zdUvBmOIU/j4vPPTKf3bJVn+CVcxtztC10cdJC5Xsfseh5N4nyzT
 BjPxDDo7nX/fx53iNEb5aSfPz68KBUMmPdDLupPY+2olO9EOixS2tfA9AsU6tmIf
 4y3RbnkEcKYknYRxJjmipKGsYL9AEeG9O7E+4aOJU4zfNbXJkoN0CwfRXY7+u/Ov
 nCLZTs2iWDM=
 =JFXZ
 -----END PGP SIGNATURE-----

Merge tag 'perf-urgent-2022-10-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull misc perf fixes from Ingo Molnar:

 - Fix a PMU enumeration/initialization bug on Intel Alder Lake CPUs

 - Fix KVM guest PEBS register handling

 - Fix race/reentry bug in perf_output_read_group() reading of PMU
   counters

* tag 'perf-urgent-2022-10-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/core: Fix reentry problem in perf_output_read_group()
  perf/x86/core: Completely disable guest PEBS via guest's global_ctrl
  perf/x86/intel: Fix unchecked MSR access error for Alder Lake N
2022-10-02 09:41:27 -07:00
Linus Torvalds
534b0abc62 - Add the respective UP last level cache mask accessors in order not to
cause segfaults when lscpu accesses their representation in sysfs
 
 - Fix for a race in the alternatives batch patching machinery when
 kprobes are set
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmM5ZDkACgkQEsHwGGHe
 VUrkaA//dXhnPu2AM9x/v7JMZw0BO2peKMNCmO7b6z4+xIXlxNGNYeO766ZqpjSd
 eFJj5Hv9ESOZw4UG5cvPA1Vj14nSa6/03Lo9JBFthl2KLOZEgVrD+GNQEJMqxPi/
 9s1+764NXYi8iILHj7N4epQmz+oIbCUlnHLWZRkmG5ys40cPPI/d5li/rKBK8yIQ
 W89f+WgbqCmpn9Ha8PFYy5uuLxQJnN/McDVZyW2d4MSxJ/FukRl4x1agrfnJq1fb
 xz9Y/ZpVRPQCc4fJbQcTTffyFyg42AAqC0O0jJ5ZsOJDjZoQS7WvkcKYO33FiwKv
 /wo61B+7SxbNMcZYhQGP8BxaBeSPlXmMKaifW+xZDS6RN4zfCq/M1+ziVB45GdUq
 S5hN699vhImciXM5t18wPw6mrpoBBkQYBv+xKkC9ykUw2vxEZ32DeFzwxrybdcGC
 hWKZJAVTQpvzr1FlrUAbBtQnhUTxSAB6EAdTtIuHQ+ts+OcraR8JNe59GCsEdCVI
 as+mfqMKB8lwoSyDwomkeMcx5yL9XYy+STLPsPTHLrYFjqwTBOZgWRGrVZzt0EBo
 0z12tqxpaFc7RI48Vi0qifkeX2Fi63HSBI/Ba+i11a2jM6NT2d2EcO26rDpO6R2S
 6K0N7cD3o0wO+QK2hwxBgGnX8e2aRUE8tjYmW40aclfxl4nh/08=
 =MiiB
 -----END PGP SIGNATURE-----

Merge tag 'x86_urgent_for_v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 fixes from Borislav Petkov:

 - Add the respective UP last level cache mask accessors in order not to
   cause segfaults when lscpu accesses their representation in sysfs

 - Fix for a race in the alternatives batch patching machinery when
   kprobes are set

* tag 'x86_urgent_for_v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/cacheinfo: Add a cpu_llc_shared_mask() UP variant
  x86/alternative: Fix race in try_get_desc()
2022-10-02 09:30:35 -07:00
Zhang Qilong
e2062df704 i2c: davinci: fix PM disable depth imbalance in davinci_i2c_probe
The pm_runtime_enable will increase power disable depth. Thus a
pairing decrement is needed on the error handling path to keep
it balanced according to context.

Fixes: 17f88151ff ("i2c: davinci: Add PM Runtime Support")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Reviewed-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-10-02 00:46:42 +02:00
Marek Vasut
367d4c887a dt-bindings: i2c: st,stm32-i2c: Document wakeup-source property
Document wakeup-source property. This fixes dtbs_check warnings
when building current Linux DTs:

"
arch/arm/boot/dts/stm32mp153c-dhcom-drc02.dtb: i2c@40015000: Unevaluated properties are not allowed ('wakeup-source' was unexpected)
"

Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-10-02 00:34:28 +02:00
Marek Vasut
f938a5295c dt-bindings: i2c: st,stm32-i2c: Document interrupt-names property
Document interrupt-names property with "event" and "error" interrupt names.
This fixes dtbs_check warnings when building current Linux DTs:

"
arch/arm/boot/dts/stm32mp153c-dhcom-drc02.dtb: i2c@40015000: Unevaluated properties are not allowed ('interrupt-names' was unexpected)
"

Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-10-02 00:34:16 +02:00
Linus Torvalds
b357fd1c2a USB/Thunderbolt fixes for 6.0-final
Here are some tiny USB and Thunderbolt driver fixes and quirks, for
 6.0-final.
 
 Included in here are:
 	- 3 uas/usb-storage driver quirks to get the devices working
 	  properly due to broken firmware images in them (they can not
 	  run at high data rates, and are also throttled on other
 	  operating systems because of this.)
 	- thunderbolt bugfix for plug event delays
 	- typec runtime warning removal
 	- dwc3 st driver bugfix.  Note, a follow-on fix for this will
 	  end up coming in for 6.1-rc1 as the developers are still
 	  arguing over what the final solution will be, but this should
 	  be sufficient for now.
 
 All of these have been in linux-next with no reported problems.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYzhqtQ8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ymxGwCgyM73eX+vvOBrL52/EugfrRbthWkAoI6X2OEO
 96K4C8AotvOQH47t4jOY
 =SbSe
 -----END PGP SIGNATURE-----

Merge tag 'usb-6.0-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB/Thunderbolt fixes from Greg KH:
 "Here are some tiny USB and Thunderbolt driver fixes and quirks.

  Included in here are:

   - three uas/usb-storage driver quirks to get the devices working
     properly due to broken firmware images in them (they can not run at
     high data rates, and are also throttled on other operating systems
     because of this)

   - thunderbolt bugfix for plug event delays

   - typec runtime warning removal

   - dwc3 st driver bugfix. Note, a follow-on fix for this will end up
     coming in for 6.1-rc1 as the developers are still arguing over what
     the final solution will be, but this should be sufficient for now

  All of these have been in linux-next with no reported problems"

* tag 'usb-6.0-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  uas: ignore UAS for Thinkplus chips
  usb-storage: Add Hiksemi USB3-FW to IGNORE_UAS
  uas: add no-uas quirk for Hiksemi usb_disk
  usb: dwc3: st: Fix node's child name
  usb: typec: ucsi: Remove incorrect warning
  thunderbolt: Explicitly reset plug events delay back to USB4 spec value
2022-10-01 09:39:42 -07:00
Linus Torvalds
89f2ddce78 media fixes for v6.0-rc8
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE+QmuaPwR3wnBdVwACF8+vY7k4RUFAmM3y1UACgkQCF8+vY7k
 4RW/zQ/7BfgZQ0G54jwmG/v5IPpnSnmZxgagtAe93vA5xb3m9VG+RPIenJcOgWcN
 MQWsVQb5EmNQFU+VEy2PMi3rDQ3XWAfK3Mr1t4hev7CY0lUGcE15757hJClimeEC
 dQfy8OhTwbR5L/FCoMNZSe3L3ulVIv2rVyG5CnLpe6jolpHqeRwg4otCLKf1Lu0E
 WLJldFRGkytYB6rJYuYYV1AzwtjgCmF6hfA5idN6MFzRzpw7Ne+M9k5iwOGvQyjB
 pHYwgFLEGPWTZI6fwuA7poVdkw/o8Cj7pRvO746OeQPM1vATo/AhKf/235JU5QcK
 paya7xlJ82kbELk+KNDFDXOeOC4L/Sw75BEzlux/Ln4v1wVzV0UOmO5Iinfp3tDe
 sJyY21cQ3Ung6CjUQXKj4fOOb7KDZOtfqsFl5YEFiYki0veyA9/EVfzCciA85y+l
 Oyt8JsoEgfiqoINNRmslcqJ+s+DiHqjz35+t4qU014wQOrsa3SQ/SkGKz74Qm5us
 8KXUhSbJy+DZU/6jGPru3FvVWFQZIWfGZRv168J/Q7obrjvlWdvn0c+0l399wGcK
 5jlhtsL5rCZ0aSxfZaCwzktm9xTg9fxsn6jdU440FaRzPJWOsPvk+WTbmCZLyedF
 MaxdIf8EhMhGY3kDE2cTiQBvVciYtoH4Peq72LHCsQN2eBQIuSU=
 =QcVl
 -----END PGP SIGNATURE-----

Merge tag 'media/v6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media fixes from Mauro Carvalho Chehab:

 - some fixes for the v4l2 ioctl handler logic

 - a fix for an out of bound access in the DVB videobuf2 handler

 - three driver fixes (rkvdec, mediatek/vcodek and uvcvideo)

* tag 'media/v6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  media: rkvdec: Disable H.264 error detection
  media: mediatek: vcodec: Drop platform_get_resource(IORESOURCE_IRQ)
  media: dvb_vb2: fix possible out of bound access
  media: v4l2-ioctl.c: fix incorrect error path
  media: v4l2-compat-ioctl32.c: zero buffer passed to v4l2_compat_get_array_args()
  media: uvcvideo: Fix InterfaceProtocol for Quanta camera
2022-10-01 09:27:18 -07:00
Linus Torvalds
2a4b6e13e1 One MAINTAINERS update, two MM fixes, both cc:stable
-----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCYzec9wAKCRDdBJ7gKXxA
 jqSVAQDfJdJ/lPUjtm5gHAZiHhc5GmnIZgKPBxLZQhTT3r/7kwD/ZK8xvcGb9MW7
 a9/J7tsDtaBBjLbbOak+zx7FwZIsbwg=
 =d+tG
 -----END PGP SIGNATURE-----

Merge tag 'mm-hotfixes-stable-2022-09-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull more hotfixes from Andrew Morton:
 "One MAINTAINERS update, two MM fixes, both cc:stable"

The previous pull wasn't fated to be the last one..

* tag 'mm-hotfixes-stable-2022-09-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  damon/sysfs: fix possible memleak on damon_sysfs_add_target
  mm: fix BUG splat with kvmalloc + GFP_ATOMIC
  MAINTAINERS: drop entry to removed file in ARM/RISCPC ARCHITECTURE
2022-10-01 09:13:29 -07:00
Levi Yun
1c8e2349f2 damon/sysfs: fix possible memleak on damon_sysfs_add_target
When damon_sysfs_add_target couldn't find proper task, New allocated
damon_target structure isn't registered yet, So, it's impossible to free
new allocated one by damon_sysfs_destroy_targets.

By calling damon_add_target as soon as allocating new target, Fix this
possible memory leak.

Link: https://lkml.kernel.org/r/20220926160611.48536-1-sj@kernel.org
Fixes: a61ea561c8 ("mm/damon/sysfs: link DAMON for virtual address spaces monitoring")
Signed-off-by: Levi Yun <ppbuk5246@gmail.com>
Signed-off-by: SeongJae Park <sj@kernel.org>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org>	[5.17.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-30 18:46:31 -07:00
Florian Westphal
30c1936663 mm: fix BUG splat with kvmalloc + GFP_ATOMIC
Martin Zaharinov reports BUG with 5.19.10 kernel:
 kernel BUG at mm/vmalloc.c:2437!
 invalid opcode: 0000 [#1] SMP
 CPU: 28 PID: 0 Comm: swapper/28 Tainted: G        W  O      5.19.9 #1
 [..]
 RIP: 0010:__get_vm_area_node+0x120/0x130
  __vmalloc_node_range+0x96/0x1e0
  kvmalloc_node+0x92/0xb0
  bucket_table_alloc.isra.0+0x47/0x140
  rhashtable_try_insert+0x3a4/0x440
  rhashtable_insert_slow+0x1b/0x30
 [..]

bucket_table_alloc uses kvzalloc(GPF_ATOMIC).  If kmalloc fails, this now
falls through to vmalloc and hits code paths that assume GFP_KERNEL.

Link: https://lkml.kernel.org/r/20220926151650.15293-1-fw@strlen.de
Fixes: a421ef3030 ("mm: allow !GFP_KERNEL allocations for kvmalloc")
Signed-off-by: Florian Westphal <fw@strlen.de>
Suggested-by: Michal Hocko <mhocko@suse.com>
Link: https://lore.kernel.org/linux-mm/Yy3MS2uhSgjF47dy@pc636/T/#t
Acked-by: Michal Hocko <mhocko@suse.com>
Reported-by: Martin Zaharinov <micron10@gmail.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-30 18:46:31 -07:00
Lukas Bulwahn
b674deddeb MAINTAINERS: drop entry to removed file in ARM/RISCPC ARCHITECTURE
Commit c1fe8d054c ("ARM: riscpc: use GENERIC_IRQ_MULTI_HANDLER") removes
arch/arm/include/asm/hardware/entry-macro-iomd.S, but missed to adjust
MAINTAINERS.

Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a
broken reference.

Drop the file entry to the removed file in ARM/RISCPC ARCHITECTURE.

Link: https://lkml.kernel.org/r/20220919075255.386-1-lukas.bulwahn@gmail.com
Fixes: c1fe8d054c ("ARM: riscpc: use GENERIC_IRQ_MULTI_HANDLER")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Russell King <linux@armlinux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-30 18:46:31 -07:00
Linus Torvalds
ffb4d94b43 amdgpu:
- VCN 4.x and GC 11.x fixes, mostly around fw
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEb4nG6jLu8Y5XI+PfTA9ye/CYqnEFAmM3av0ACgkQTA9ye/CY
 qnH8Ng//W2CCGNXVyTCHa/SZD8AbEoozPQ8F171OlamHTtZmekQBLn0lvEB13xeX
 VlTB9SVC2WcJXSZAKMLk0HvooyePgA7j2E6Xdaf2Qz5k8Rjrn8VJrDlo7nYfYomE
 Uq481z39UYdlwWNHj6A7sG58++3JRgRB6qh1NhHD2jF09LSFfenQhEhYUeyXTvT6
 MRs84XE0BW9DAWD9Zwu8sdCA2rMocrNab4Iu1D6IuQKXLVB2Sr8m5ADDJYORr0SD
 09bhY7Rh3Ecx1iiKx0cKSgCkS5D7OMHilpAiGlNgfoSf3aFyQm6A/MpD94K5dBlq
 7e7ZF95XDbsCMMqgR6lgSk8yylqS3z2BOhIo+EDtDqEi+DzLXLUXXK6ApxUP7Z13
 oWPo26iDGNZW6hYNMCcfZ0/nlZnGkCWToSZtDXw/pjEcM8qSzNcDdo+L6ullgdx2
 lvfJW4eby3LLiBz4hwEsV9AO9tk466zQHu4FIr7EXNVYCf28B6UxBXGncvBAchgW
 F4WzToDUQBbHs8fwvH9aipEtKNa1B5cKnYE8u/0+OpCgdH1PUnyQRmkO+lSntEGK
 UGCktE2p8K3E2ysxsF6q1vp2+qwkuPMGrt7R97VgRLtY8wov5MQV9DdVxtkVJ82C
 weMe5dVMFDBzbghIrabWIv8T5Pj4u5AQq2/LUhQpyuTCb5F4sqA=
 =sOY/
 -----END PGP SIGNATURE-----

Merge tag 'drm-fixes-2022-10-01' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Daniel Vetter:
 "Some last minute amd fixes:

   - VCN 4.x and GC 11.x fixes, mostly around fw"

* tag 'drm-fixes-2022-10-01' of git://anongit.freedesktop.org/drm/drm:
  drm/amdgpu/gfx11: switch to amdgpu_gfx_rlc_init_microcode
  drm/amdgpu: add helper to init rlc firmware
  drm/amdgpu: add helper to init rlc fw in header v2_4
  drm/amdgpu: add helper to init rlc fw in header v2_3
  drm/amdgpu: add helper to init rlc fw in header v2_2
  drm/amdgpu: add helper to init rlc fw in header v2_1
  drm/amdgpu: add helper to init rlc fw in header v2_0
  drm/amdgpu: save rlcv/rlcp ucode version in amdgpu_gfx
  drm/amdgpu: Enable sram on vcn_4_0_2
  drm/amdgpu: Enable VCN DPG for GC11_0_1
2022-09-30 16:25:52 -07:00
Linus Torvalds
e5fa173f9a Here's the last batch of clk driver fixes for this release. These
patches fix serious problems, for example, i.MX has an issue where
 changing the NAND clk frequency hangs the system. On Allwinner H6 the
 GPU is being overclocked which could lead to long term hardware damage.
 And finally on some Broadcom SoCs the serial console stopped working
 because the clk tree hierarchy description got broken by an inadvertant
 DT node name change. That's fixed by using 'clock-output-names' to
 generate a stable and unique name for clks so the framework can properly
 link things up.
 
 There's also a couple build fixes in here. One to fix CONFIG_OF=n builds
 and one to avoid an array out of bounds bug that happens during clk
 registration on microchip. I hope that KASAN would have found that OOB
 problem, but probably KASAN wasn't attempted. Instead LLVM/clang
 compilation caused an oops, while GCC didn't.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAmM3WigRHHNib3lkQGtl
 cm5lbC5vcmcACgkQrQKIl8bklSUagQ//WM5qcHAYbvxCXN44m+dr+Y/5h/3wUMcB
 RySFPR67wao2yiCe/868kt8RMBA9hvCLEtTE/qai31+67jZpYjJontKjCx+YigDa
 sobGDTFFg5BsBODLAvPcDbnL41CDAbyShBgSuwUyqBKiV4XasN52NFu1U13kiyuO
 iay+zho398oaINnjNje0mJU4TsKUavK6lxwp+siHOsRAFUa9+g+jG/aY2G0He26f
 jZ5fzxWeVjdhUtUhZRNwtKI+1Y25qOG/ETuz7eGVFPCkBED01AegKgpG7M22E2PD
 n/ZUMjr4kvepTBQpd0tBGRIQ/v3jBLKPHU1PWp0cSjvRCo8Z0d6qUc57nYwb3fcd
 hYKp+i1BC8M3on+jvLX6Ktwe+YGDhw1q82JxJ0lD4Kj9vfg1bO6GBE/zSeWp1e04
 ZGopKA9+pZoj4nYEnifrsxJ39ib7yM+OM7XUhO+fRNvjl8u516jkt4TwbBO8G6vF
 lsRu8/6QqAN88eIVJAUHP4osCL5ZP/gu0zL8VuFuVfm4baBnqjswY0BkFXkktSd8
 RUc5tHJB4GyFQ/B3KF8w8lv0z5rocxDMqjqRABdZpMugnX/x4JhKvik+YMQ9CzYC
 YF0Sp614x3GvVGFRZIzl0O502FHTLx+0uqS3dL38U5SBbKi3hNSBsiIWkFTKNdbz
 rcpLi41GY1c=
 =5AzX
 -----END PGP SIGNATURE-----

Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk driver fixes from Stephen Boyd:
 "Here's the last batch of clk driver fixes for this release.

  These patches fix serious problems, for example, i.MX has an issue
  where changing the NAND clk frequency hangs the system. On Allwinner
  H6 the GPU is being overclocked which could lead to long term hardware
  damage.

  And finally on some Broadcom SoCs the serial console stopped working
  because the clk tree hierarchy description got broken by an
  inadvertant DT node name change. That's fixed by using
  'clock-output-names' to generate a stable and unique name for clks so
  the framework can properly link things up.

  There's also a couple build fixes in here. One to fix CONFIG_OF=n
  builds and one to avoid an array out of bounds bug that happens during
  clk registration on microchip. I hope that KASAN would have found that
  OOB problem, but probably KASAN wasn't attempted. Instead LLVM/clang
  compilation caused an oops, while GCC didn't"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: imx93: drop of_match_ptr
  clk: iproc: Do not rely on node name for correct PLL setup
  clk: sunxi-ng: h6: Fix default PLL GPU rate
  clk: imx: imx6sx: remove the SET_RATE_PARENT flag for QSPI clocks
  clk: microchip: mpfs: make the rtc's ahb clock critical
  clk: microchip: mpfs: fix clk_cfg array bounds violation
  clk: ingenic-tcu: Properly enable registers before accessing timers
2022-09-30 16:19:41 -07:00
Linus Torvalds
c816f2e981 perf tools fixes for v6.0: 5th batch
- Fail the 'perf test record' entry on error, fixing a regression where just
   setup stuff like allocating memory and not the actual things being tested failed.
 
 - Fixup disabling of -Wdeprecated-declarations for the python scripting engine, the
   previous attempt had a brown paper bag thinko.
 
 - Fix branch stack sampling test to include sanity check for branch filter on PowerPC.
 
 - Update is_ignored_symbol function to match the kernel ignored list, fixing running
   the 'perf test' entry that compares resolving symbols from kallsyms to resolving from
   vmlinux.
 
 - Augment the data source type with ARM's neoverse_spe list, the previous code
   was limited in its search resolving the data source.
 
 - Fix some clang 5 variable set but unused cases.
 
 - Get a perf cgroup more portably in BPF as the __builtin_preserve_enum_value builtin is
   not available in older versions of clang. In those cases we can forgo BPF's CO-RE (Compile
   Once, Run Everywhere).
 
 - More Fixes for Intel's hybrid CPU model.
 
 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCYzY3aAAKCRCyPKLppCJ+
 J+3XAQDGalZmlY6Y0aUrCKj6+utDy7bUy+xamDaD+6gjJgkVNAD/R9YrI7roaGb3
 rx3gRJu46CD1abzaI1rMZo35DSYICgE=
 =n5Gs
 -----END PGP SIGNATURE-----

Merge tag 'perf-tools-fixes-for-v6.0-2022-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Fail the 'perf test record' entry on error, fixing a regression where
   just setup stuff like allocating memory and not the actual things
   being tested failed.

 - Fixup disabling of -Wdeprecated-declarations for the python scripting
   engine, the previous attempt had a brown paper bag thinko.

 - Fix branch stack sampling test to include sanity check for branch
   filter on PowerPC.

 - Update is_ignored_symbol function to match the kernel ignored list,
   fixing running the 'perf test' entry that compares resolving symbols
   from kallsyms to resolving from vmlinux.

 - Augment the data source type with ARM's neoverse_spe list, the
   previous code was limited in its search resolving the data source.

 - Fix some clang 5 variable set but unused cases.

 - Get a perf cgroup more portably in BPF as the
   __builtin_preserve_enum_value builtin is not available in older
   versions of clang. In those cases we can forgo BPF's CO-RE (Compile
   Once, Run Everywhere).

 - More Fixes for Intel's hybrid CPU model.

* tag 'perf-tools-fixes-for-v6.0-2022-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf build: Fixup disabling of -Wdeprecated-declarations for the python scripting engine
  perf tests mmap-basic: Remove unused variable to address clang 15 warning
  perf parse-events: Ignore clang 15 warning about variable set but unused in bison produced code
  perf tests record: Fail the test if the 'errs' counter is not zero
  perf test: Fix test case 87 ("perf record tests") for hybrid systems
  perf arm-spe: augment the data source type with neoverse_spe list
  perf tests vmlinux-kallsyms: Update is_ignored_symbol function to match the kernel ignored list
  perf tests powerpc: Fix branch stack sampling test to include sanity check for branch filter
  perf parse-events: Remove "not supported" hybrid cache events
  perf print-events: Fix "perf list" can not display the PMU prefix for some hybrid cache events
  perf tools: Get a perf cgroup more portably in BPF
2022-09-30 16:03:19 -07:00
Linus Torvalds
920541bb0b A small fix to the reported set of supported CPUID bits, and selftests fixes:
* Skip tests that require EPT when it is not available
 
 * Do not hang when a test fails with an empty stack trace
 
 * avoid spurious failure when running access_tracking_perf_test in a KVM guest
 
 * work around GCC's tendency to optimize loops into mem*() functions, which
   breaks because the guest code in selftests cannot call into PLTs
 
 * fix -Warray-bounds error in fix_hypercall_test
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmM2x0MUHHBib256aW5p
 QHJlZGhhdC5jb20ACgkQv/vSX3jHroMLBggAmQpzSTuUq8Vn4fbXg8NpxofzZVzo
 hWagwlm29Ac7jfoSa4lOX4nbkyb5CjEL1O2qSd1/lJuZndMxQhmLe3Bnzu2Mzqp0
 7WFXr0lAiOeH4hw8NE9Kx4x/vJ8nev4gsOlWNh7rr1RlP3vgHTtyYN/J7UoNnvTl
 fcbD1Bi/A+2RnzMQ6cHms8lqsAfts/OZIMTCUf0TW2EhLmrN5CLwQkRNNh1Ql8gX
 /ZvLs6C/FEkgok6Wfc6mMrIY+Wlu7en6/pHAjeORAoieGC2CYh0Od3ETzpe7Qx+L
 L/W3BiOYlvQBqEQmgzd6bpVNDlqhn0GGczY5rkB54Es7jfxUjLU2myqw+g==
 =bb0j
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-6.0' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull kvm fixes from Paolo Bonzini:
 "A small fix to the reported set of supported CPUID bits, and selftests
  fixes:

   - Skip tests that require EPT when it is not available

   - Do not hang when a test fails with an empty stack trace

   - avoid spurious failure when running access_tracking_perf_test in a
     KVM guest

   - work around GCC's tendency to optimize loops into mem*() functions,
     which breaks because the guest code in selftests cannot call into
     PLTs

   - fix -Warray-bounds error in fix_hypercall_test"

* tag 'for-linus-6.0' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: selftests: Compare insn opcodes directly in fix_hypercall_test
  KVM: selftests: Implement memcmp(), memcpy(), and memset() for guest use
  KVM: x86: Hide IA32_PLATFORM_DCA_CAP[31:0] from the guest
  KVM: selftests: Gracefully handle empty stack traces
  KVM: selftests: replace assertion with warning in access_tracking_perf_test
  KVM: selftests: Skip tests that require EPT when it is not available
2022-09-30 15:49:13 -07:00
Daniel Vetter
414208e489 Merge tag 'amd-drm-fixes-6.0-2022-09-30-1' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.0-2022-09-30-1:

amdgpu:
- VCN 4.x fixes
- RLC fixes for GC 11.x

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220930210454.542719-1-alexander.deucher@amd.com
2022-09-30 23:10:55 +02:00
Hawking Zhang
0fd85e89b5 drm/amdgpu/gfx11: switch to amdgpu_gfx_rlc_init_microcode
switch to common helper to initialize rlc firmware
for gfx11

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-30 16:59:06 -04:00
Hawking Zhang
04fa38cce6 drm/amdgpu: add helper to init rlc firmware
To initialzie rlc firmware according to rlc
firmware header version

v2: squash in backwards compat fix

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-30 16:59:00 -04:00
Hawking Zhang
b33139ee15 drm/amdgpu: add helper to init rlc fw in header v2_4
To initialize rlc firmware in header v2_4

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-30 16:58:57 -04:00
Hawking Zhang
c1c3f41ffb drm/amdgpu: add helper to init rlc fw in header v2_3
To initialize rlc firmware in header v2_3

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-30 16:58:47 -04:00
Hawking Zhang
bcecb65248 drm/amdgpu: add helper to init rlc fw in header v2_2
To initialize rlc firmware in header v2_2

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-30 16:58:40 -04:00
Hawking Zhang
90df151245 drm/amdgpu: add helper to init rlc fw in header v2_1
To initialize rlc firmware in header v2_1

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-30 16:58:37 -04:00
Hawking Zhang
2f3f958602 drm/amdgpu: add helper to init rlc fw in header v2_0
To initialize rlc firmware in header v2_0

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-30 16:58:35 -04:00
Hawking Zhang
af81a9201e drm/amdgpu: save rlcv/rlcp ucode version in amdgpu_gfx
cache rlcv/rlcvp ucode version info in amdgpu_gfx
structure

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-30 16:58:23 -04:00
Linus Torvalds
70575e7783 virtio: fixes
Some last minute fixes. virtio-blk is the most important one
 since it was actually seen in the field, but the rest
 of them are small and clearly safe, everything here has
 been in next for a while.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmM3EacPHG1zdEByZWRo
 YXQuY29tAAoJECgfDbjSjVRpTp8H/2y+TqLMuHC/ErfEC9a9H4QUgi3wgTtya9jp
 8UF3pzYp8kN+35gcWn+3PaZQ6fKZ8bjkHfB54j+9HI4dFrcOVVT+3NtpoM7p+6NK
 lFAbsk2R/WnhSw9nRmVQg6ldLWYzWX3r3SJ9l44nOtFFfVHdr/ODLgA8l6cciQZv
 K7Bm3qUsLZe/C7JvlpE9LStyjNclvCM1gUs4Gg+gj7smjovE7DYQEUIoVIZp5Gqj
 DH3lLqoQdVQ+tIWFHLdW1Adc4YUoOVq8QzCFXISAx4L4AXlQLE4ztFULjB+62ncE
 IlU3EcbVaHJiRgTSytZhe/dVzrkI8n9rtFLqg3HCtT/RJ/gj+gg=
 =BTGf
 -----END PGP SIGNATURE-----

Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost

Pull virtio fixes from Michael Tsirkin:
 "Some last minute fixes.

  The virtio-blk one is the most important one since it was actually
  seen in the field, but the rest of them are small and clearly safe,
  everything here has been in next for a while"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  vdpa/mlx5: Fix MQ to support non power of two num queues
  vduse: prevent uninitialized memory accesses
  virtio-blk: Fix WARN_ON_ONCE in virtio_queue_rq()
  virtio_test: fixup for vq reset
  virtio-crypto: fix memory-leak
  vdpa/ifcvf: fix the calculation of queuepair
2022-09-30 09:41:34 -07:00
Linus Torvalds
7bc6e90d7a block-6.0-2022-09-29
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmM2W7wQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgplm+EACplcKQA0fDsHOAyhqi6Ms7VK38kYAItlK2
 ztSeIQONBUtEuzSD6HA6W5+3gPPWRwXhNrIRMQp6rbKY8WS7jtTP/XqNISxjtvPx
 SMCDnDj8ANE8ykgLxiNECh87Q8D04wu3mY7Rs45aIowvXYxv8ALxGZ3QjFL/vDPT
 BHY8+EBwHbLRcpmI+J/eg1Qa9EfAixCTo+rimAucGe4qHVHmPawEjGY2hgmIcrdo
 k/WTelymDVkbrlRRcERWTFxjRkmS/f6lMQlEj3sPPsFkl2ka/l6BT135FOCJI/v4
 AEOpGjSoLTr0E3b4BCzu0MlU9WsTflinSgWKqJt2J4jyhuWjyCALv4ZrEIetKOZI
 NO+iEiTs2oO/dlGB3x0YFEieDACFRC6/leBAYgJIsG01jRBnQfU9/evxr25pK7kd
 iax+y0f/ilL0/aWR61YhJ67OH+aPLcgwJ1TUHD9N9BCcvq85rk46bcvmRf+ar9JZ
 4srCnybHN9yhkPkxeZKuTiNqJ3xZSesglNxxDMOfU9iWY1CjQX/aOoBuydJkJz4m
 gH8tyfEcvJxdhuLI3mvo7Mv2WUAyS2ohG4k1EAFZbPUa0pAHkyM9b1ZvSnbHWa6Z
 k6yKWmv8WLFKD2VY28HrsMHYBBVDCcJNsDzLqydaKFTU2g8YEQdk3h70Ga3tbhwS
 k23Pfs5bcw==
 =SZZ1
 -----END PGP SIGNATURE-----

Merge tag 'block-6.0-2022-09-29' of git://git.kernel.dk/linux

Pull block fixes from Jens Axboe:
 "A single NVMe pull request via Christoph with a few fixes that should
  go into the 6.0 release:

   - Fix IOC_PR_CLEAR and IOC_PR_RELEASE ioctls for nvme devices
     (Michael Kelley)

   - Disable Write Zeroes on Phison E3C/E4C (Tina Hsu)"

* tag 'block-6.0-2022-09-29' of git://git.kernel.dk/linux:
  nvme-pci: disable Write Zeroes on Phison E3C/E4C
  nvme: Fix IOC_PR_CLEAR and IOC_PR_RELEASE ioctls for nvme devices
2022-09-30 09:33:33 -07:00