marvell,dsa properties has been removed from kirkwood-rd88f6281.dtsi
while cleanuping the dsa binding, but the dsa reference in
kirkwood-rd88f6281-z0.dts has been missed causing the following errors:
arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts:21.4-16: Warning (reg_format): /dsa/switch@0:reg: property has invalid length (8 bytes) (#address-cells == 2, #size-cells == 1)
arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts:23.5-15: Warning (reg_format): /dsa/switch@0/port@4:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
arch/arm/boot/dts/kirkwood-rd88f6281-z0.dtb: Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
arch/arm/boot/dts/kirkwood-rd88f6281-z0.dtb: Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
arch/arm/boot/dts/kirkwood-rd88f6281-z0.dtb: Warning (spi_bus_reg): Failed prerequisite 'reg_format'
arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts:20.12-26.5: Warning (avoid_default_addr_size): /dsa/switch@0: Relying on default #address-cells value
arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts:20.12-26.5: Warning (avoid_default_addr_size): /dsa/switch@0: Relying on default #size-cells value
arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts:22.11-25.6: Warning (avoid_default_addr_size): /dsa/switch@0/port@4: Relying on default #address-cells value
arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts:22.11-25.6: Warning (avoid_default_addr_size): /dsa/switch@0/port@4: Relying on default #size-cells value
So remove the dsa reference too in order to fix this issue.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Follow the recent trend for the license description
Acked-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Utilize the new DSA binding, introduced with commit 8c5ad1d617 ("net: dsa:
Document new binding"). The legacy binding node is kept included, but is marked
disabled.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
The dsa node does not have a reg property, so remove the address from
the unit name.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
During the conversion of boards to use DT to instantiate Distributed
Switch Architecture, nobody volunteered to test. As to be expected,
the conversion was flawed. Testers and access to hardware has now
become available, and this patch hopefully fixes the problems.
dsa,mii-bus must be a phandle to the top level mdio node, not the port
specific subnode of the mdio device.
dsa,ethernet must be a phandle to the port subnode within the ethernet
DT node, not the ethernet node.
Don't pinctrl hog the card detect gpio for mvsdio.
Rename the .dts files to make it clearer which file is for the Z0
stepping and which for the A0 or later stepping.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Cc: seugene@marvell.com
Tested-by: Eugene Sanivsky <seugene@marvell.com>
Fixes: e2eaa339af: ("ARM: Kirkwood: convert rd88f6281-setup.c to DT.")
Fixes: e7c8f3808b: ("ARM: kirkwood: Convert mv88f6281gtw_ge switch setup to DT")
Cc: <stable@vger.kernel.org> #v3.15+
Link: https://lkml.kernel.org/r/1409592941-22244-1-git-send-email-andrew@lunn.ch
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
