We keep these separate since some files are shared and conflict-prone,
but there isn't really much to write about here.
Some of the churnier pieces is for the Aspeed platforms, which did an
overdue refresh of the defconfig, and enabled USB gadget and some
drivers from there. Most of the rest are minor additions here and there
to turn on drivers that are needed or useful on the various platforms.
-----BEGIN PGP SIGNATURE-----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=t+qo
-----END PGP SIGNATURE-----
Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC defconfig updates from Olof Johansson:
"We keep these separate since some files are shared and conflict-prone,
but there isn't really much to write about here.
Some of the churnier pieces is for the Aspeed platforms, which did an
overdue refresh of the defconfig, and enabled USB gadget and some
drivers from there. Most of the rest are minor additions here and
there to turn on drivers that are needed or useful on the various
platforms"
* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (39 commits)
ARM: multi_v7_defconfig: add CONFIG_UNIPHIER_THERMAL and CONFIG_SNI_AVE
ARM: config: aspeed: Enable new FSI drivers
ARM: config: multi_v5: Enable ASPEED drivers
ARM: config: multi_v5: Refresh configuration
ARM: config: aspeed: Update defconfig
ARM: multi_v7_defconfig: Enable support for RZN1D-DB
ARM: shmobile: defconfig: Disable /sbin/hotplug fork-bomb
ARM: shmobile: defconfig: Enable support for RZN1D-DB
ARM: shmobile: defconfig: Enable reset controller support
ARM: shmobile: defconfig: Drop NET_VENDOR_<FOO>=n
arm64: defconfig: Enable more peripherals for Samsung Chromebook Plus.
arm64: defconfig: Enable CONFIG_MTD_NAND_QCOM for IPQ8074
ARM: qcom_defconfig: Enable QCOM NAND related configs
ARM: imx_v6_v7_defconfig: add DMATEST support
ARM: mvebu_v7_defconfig: enable SFP support
ARM: mvebu_v7_defconfig: sync defconfig
ARM: multi_v7_defconfig: Add Marvell NAND controller support
arm: configs: Add USB gadget to Aspeed G5 defconfig
arm: configs: Add USB gadget to Aspeed G4 defconfig
arm64: defconfig: enable HiSilicon PMU driver
...
- Add Cirrus Logic Madera Codec (CS47L35, CS47L85 and CS47L90/91) driver
- Add ChromeOS EC CEC driver
- Add ROHM BD71837 PMIC driver
- New Device Support
- Add support for Dialog Semi DA9063L PMIC variant to DA9063
- Add support for Intel Ice Lake to Intel-PLSS-PCI
- Add support for X-Powers AXP806 to AXP20x
- New Functionality
- Add support for USB Charging to the ChromeOS Embedded Controller
- Add support for HDMI CEC to the ChromeOS Embedded Controller
- Add support for HDMI CEC to Intel HDMI
- Add support for accessory detection to Madera devices
- Allow individual pins to be configured via DT' wlf,csnaddr-pd
- Provide legacy platform specific EEPROM/Watchdog commands; rave-sp
- Fix-ups
- Trivial renaming/spelling fixes; cros_ec, da9063-*
- Convert to Managed Resources (devm_*); da9063-*, ti_am335x_tscadc
- Transition to helper macros/functions; da9063-*
- Constify; kempld-core
- Improve error path/messages; wm8994-core
- Disable IRQs locally instead of relying on USB subsystem; dln2
- Remove unused code; rave-sp
- New exports; sec-core
- Bug Fixes
- Fix possible false I2C transaction error; arizona-core
- Fix declared memory area size; hi655x-pmic
- Fix checksum type; rave-sp
- Fix incorrect default serial port configuration: rave-sp
- Fix incorrect coherent DMA mask for sub-devices; sm501
-----BEGIN PGP SIGNATURE-----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=4Yj4
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Drivers:
- Add Cirrus Logic Madera Codec (CS47L35, CS47L85 and CS47L90/91) driver
- Add ChromeOS EC CEC driver
- Add ROHM BD71837 PMIC driver
New Device Support:
- Add support for Dialog Semi DA9063L PMIC variant to DA9063
- Add support for Intel Ice Lake to Intel-PLSS-PCI
- Add support for X-Powers AXP806 to AXP20x
New Functionality:
- Add support for USB Charging to the ChromeOS Embedded Controller
- Add support for HDMI CEC to the ChromeOS Embedded Controller
- Add support for HDMI CEC to Intel HDMI
- Add support for accessory detection to Madera devices
- Allow individual pins to be configured via DT' wlf,csnaddr-pd
- Provide legacy platform specific EEPROM/Watchdog commands; rave-sp
Fix-upsL
- Trivial renaming/spelling fixes; cros_ec, da9063-*
- Convert to Managed Resources (devm_*); da9063-*, ti_am335x_tscadc
- Transition to helper macros/functions; da9063-*
- Constify; kempld-core
- Improve error path/messages; wm8994-core
- Disable IRQs locally instead of relying on USB subsystem; dln2
- Remove unused code; rave-sp
- New exports; sec-core
Bug Fixes:
- Fix possible false I2C transaction error; arizona-core
- Fix declared memory area size; hi655x-pmic
- Fix checksum type; rave-sp
- Fix incorrect default serial port configuration: rave-sp
- Fix incorrect coherent DMA mask for sub-devices; sm501"
* tag 'mfd-next-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (60 commits)
mfd: madera: Add register definitions for accessory detect
mfd: sm501: Set coherent_dma_mask when creating subdevices
mfd: bd71837: Devicetree bindings for ROHM BD71837 PMIC
mfd: bd71837: Core driver for ROHM BD71837 PMIC
media: platform: cros-ec-cec: Fix dependency on MFD_CROS_EC
mfd: sec-core: Export OF module alias table
mfd: as3722: Disable auto-power-on when AC OK
mfd: axp20x: Support AXP806 in I2C mode
mfd: axp20x: Add self-working mode support for AXP806
dt-bindings: mfd: axp20x: Add "self-working" mode for AXP806
mfd: wm8994: Allow to configure CS/ADDR Pulldown from dts
mfd: wm8994: Allow to configure Speaker Mode Pullup from dts
mfd: rave-sp: Emulate CMD_GET_STATUS on device that don't support it
mfd: rave-sp: Add legacy watchdog ping command translation
mfd: rave-sp: Add legacy EEPROM access command translation
mfd: rave-sp: Initialize flow control and parity of the port
mfd: rave-sp: Fix incorrectly specified checksum type
mfd: rave-sp: Remove unused defines
mfd: hi655x: Fix regmap area declared size for hi655x
mfd: ti_am335x_tscadc: Fix struct clk memory leak
...
- Refresh the multi ARMv5 defconfig, and add AST2400 related drivers
- Enable new ASPEED hardware that we've merged in the past few cycles.
There are about 14 different drivers since we last refreshed the
defconfig
- Turn on features required by systemd, and other bits of OpenBMC
userspace
- Enable security related options
-----BEGIN PGP SIGNATURE-----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=Icyg
-----END PGP SIGNATURE-----
Merge tag 'aspeed-4.19-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into next/defconfig
ASPEED defconfig updates for 4.19
- Refresh the multi ARMv5 defconfig, and add AST2400 related drivers
- Enable new ASPEED hardware that we've merged in the past few cycles.
There are about 14 different drivers since we last refreshed the
defconfig
- Turn on features required by systemd, and other bits of OpenBMC
userspace
- Enable security related options
* tag 'aspeed-4.19-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed:
ARM: config: aspeed: Enable new FSI drivers
ARM: config: multi_v5: Enable ASPEED drivers
ARM: config: multi_v5: Refresh configuration
ARM: config: aspeed: Update defconfig
arm: configs: Add USB gadget to Aspeed G5 defconfig
arm: configs: Add USB gadget to Aspeed G4 defconfig
Signed-off-by: Olof Johansson <olof@lixom.net>
multi_v7_defconfig and shmobile_defconfig Enhancement:
* Enable support for recently upstreamed RZN1D-DB board
in multi_v7_defconfig and shmobile_defconfig. This is
to give better test coverage.
shmobile_defconfig Clean-Up:
* Drop NET_VENDOR_<FOO>=n
This reduces the size of the defconfig without any change in the
resulting kernel config.
shmobile_defconfig Enhancements:
* Disable long deprecated /sbin/hotplug helper
* Enable reset controller support
This is to give better test coverage.
This may be used by reset controller support in the Renesas CPG/MSSR
driver when used by R-Car Gen2 and RZ/G1 SoCs.
-----BEGIN PGP SIGNATURE-----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=tQ3T
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-defconfig-for-v4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/defconfig
Renesas ARM Based SoC Defconfig Updates for v4.19
- Enable new RZN1D-DB board in multi_v7_defconfig and shmobile_defconfig
- shmobile_defconfig:
+ Drop NET_VENDOR_<FOO>=n
+ Disable long deprecated /sbin/hotplug helper
+ Enable reset controller support
* tag 'renesas-arm-defconfig-for-v4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: multi_v7_defconfig: Enable support for RZN1D-DB
ARM: shmobile: defconfig: Disable /sbin/hotplug fork-bomb
ARM: shmobile: defconfig: Enable support for RZN1D-DB
ARM: shmobile: defconfig: Enable reset controller support
ARM: shmobile: defconfig: Drop NET_VENDOR_<FOO>=n
Signed-off-by: Olof Johansson <olof@lixom.net>
This turns on the FSI-attached I2C bus driver, and the ColdFire
offloaded FSI master which are new to 4.19.
Signed-off-by: Joel Stanley <joel@jms.id.au>
This enables the devices used in the AST2400 family of BMC SoCs:
- VUART
- SPI NOR
- LPC controller
- LPC snoop (port 80)
- Ethernet
- GPIO
- ADC
- I2C
- Random number generator
- IPMI KCS
- IPMI BT
- Fan/Tach
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
This is the result of a make mutli_v5_defconfig && make savedefconfig.
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
- Enable new support:
hardware random number generator
FSI and client drivers
DRM GFX driver
- Disable unwanted features:
ARM_APPENDED_DTB
ARM_ATAG_DTB_COMPAT
BLK_DEV_RAM
- Sync G4 and G5 with OpenBMC configurations
BLK_DEV_LOOP, for updater mechanic
CRYPTO_HMAC, for libsdbus features
CRYPTO_SHA256
CRYPTO_USER_API_HASH
- Enable security related features:
SLAB_FREELIST_RANDOM
STRICT_KERNEL_RW
CC_STACKPROTECTOR_STRONG
HARDENED_USERCOPY
FORTIFY_SOURCE
- Increase kernel log buffer size
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Enable support for the Renesas RZN1D-DB Board:
- RZ/N1D (R9A06G032) base SoC support.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
No recent mainstream system uses the /sbin/hotplug fork-bomb any more.
Commit 7934779a69 ("Driver-Core: disable
/sbin/hotplug by default") disabled it in Kconfig, but the various
defconfigs weren't updated.
According to the systemd requirements, this option must be disabled, as
it slows down the system and confuses udev.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Enable support for the Renesas RZN1D-DB Board:
- RZ/N1D (R9A06G032) base SoC support,
- Synopsys DesignWare 8250 serial port support.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
R-Car Gen2 and RZ/G1 SoCs can make use of the optional reset controller
support in the Renesas CPG/MSSR driver.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Enabling NET_VENDOR_* Kconfig options does not directly affect the
kernel, so there is no need to explicitly disable them.
The individual network drivers under them are still disabled.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
- Enable ISL29018 sensor and MMA8452 accelerometer driver support for
imx6qdl-sabreauto board.
- Enable DMATEST support which is useful for DMA driver development
testing.
- Use the DRM driver for MXSFB LCD controller found on i.MX23, i.MX28,
i.MX6SX and i.MX7 SoCs.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJbUpWLAAoJEFBXWFqHsHzOlSMH/3lLUjNHkZyeZ06KiOLAJ05W
dQT01yA5QZ7MBr2xBbla/4aAjiVYIkeUfbMbRsdx+XQ4p70tvA9op9U4aGOAKBzE
Coyon2ufXJAxg60MBs9VaPrP/xouJnGeKBCm2Sgvaht/e5hngMc0LOFX6bNFa/uJ
gc0r51DMHExpSV3apidgYoUKTGFoPGvTSM4Cd+mQMVdTJAQsrKSsx3w6KlzWiVlB
Pw1iiqlOkUxaON7751uCHQvebY4XYZ+G7F1kFKS2nVrUB5qtjbhbJdXBon+nBLlt
NCscfg5GTqhlIIkCrcci3sStG+kwIo01YfJxigroSZodssUm/r/9KmqnHpgSly8=
=8A9u
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/defconfig
i.MX defconfig update for 4.19:
- Enable ISL29018 sensor and MMA8452 accelerometer driver support for
imx6qdl-sabreauto board.
- Enable DMATEST support which is useful for DMA driver development
testing.
- Use the DRM driver for MXSFB LCD controller found on i.MX23, i.MX28,
i.MX6SX and i.MX7 SoCs.
* tag 'imx-defconfig-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx_v6_v7_defconfig: add DMATEST support
ARM: imx_v6_v7_defconfig: use MXSFB DRM driver
ARM: mxs_defconfig: use MXSFB DRM driver
ARM: imx_v6_v7_defconfig: Enable imx6qdl-sabreauto sensors
Signed-off-by: Olof Johansson <olof@lixom.net>
IPQ8064 and IPQ4019 boards contain NAND flash
memory for which these configs need to be enabled.
Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Add DMATEST support and remove invalid options, such as
CONFIG_BT_HCIUART_H4 is default enabled and CONFIG_SND_SOC_IMX_WM8962
is out of date and not appear in any config file. Please refer to
Documentation/driver-api/dmaengine/dmatest.rst to test MEMCPY feature
of imx-sdma.
Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
- add NAND controller on multi_v7
- add SFP support on mvebu_v7
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCW09bkAAKCRALBhiOFHI7
1RYzAJ4vD274nhcu4Qt3n2vOzS5Wae+sMQCeNmutPbYM9fJg5A3KH/7jxJ0yeyM=
=K1xh
-----END PGP SIGNATURE-----
Merge tag 'mvebu-defconfig-4.19-1' of git://git.infradead.org/linux-mvebu into next/defconfig
mvebu defconfig for 4.19 (part 1)
- add NAND controller on multi_v7
- add SFP support on mvebu_v7
* tag 'mvebu-defconfig-4.19-1' of git://git.infradead.org/linux-mvebu:
ARM: mvebu_v7_defconfig: enable SFP support
ARM: mvebu_v7_defconfig: sync defconfig
ARM: multi_v7_defconfig: Add Marvell NAND controller support
Signed-off-by: Olof Johansson <olof@lixom.net>
This enables support for SFP cages on SolidRun Armada 38x platforms.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Use savedefconfig to sync defconfig for current kernel. No change in
generated configuration.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Now that the vhub driver is upstream and the device-trees
updated, let's enable this by default.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Now that the vhub driver is upstream and the device-trees
updated, let's enable this by default.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Use the the DRM driver for MXSFB LCD controller (used in i.MX23/
i.MX28/i.MX6SX or i.MX7). Remove CONFIG_FB_MXS which will soon be
removed.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Use the the DRM driver for MXSFB LCD controller (used in i.MX23/
i.MX28/i.MX6SX or i.MX7). Remove CONFIG_FB_MXS which will soon be
removed.
Note that this does not remove CONFIG_FB. CONFIG_FB gets selected
implicity by CONFIG_DRM/CONFIG_DRM_KMS_FB_HELPER.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable options needed for booting full system on S5Pv210-based Samsung
Galaxy S mobile phones.
-----BEGIN PGP SIGNATURE-----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=vPjN
-----END PGP SIGNATURE-----
Merge tag 'samsung-defconfig-4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/defconfig
Samsung defconfig changes for v4.19
Enable options needed for booting full system on S5Pv210-based Samsung
Galaxy S mobile phones.
* tag 'samsung-defconfig-4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: s5pv210_defconfig: Enable options needed to boot typical Linux distro
ARM: s5pv210_defconfig: Enable drivers for Samsung Aries based phones
ARM: s5pv210_defconfig: Run make savedefconfig
Signed-off-by: Olof Johansson <olof@lixom.net>
-----------------------------------
* Enable support for PWM backight and bluetooth
* Remove some vestiges of mach-davinci private clock implementation.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=y4ms
-----END PGP SIGNATURE-----
Merge tag 'davinci-for-v4.19/defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/defconfig
DaVinci defconfig updates for v4.19
-----------------------------------
* Enable support for PWM backight and bluetooth
* Remove some vestiges of mach-davinci private clock implementation.
* tag 'davinci-for-v4.19/defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: davinci_all_defconfig: Enable Bluetooth
ARM: davinci_all_defconfig: remove CONFIG_DAVINCI_RESET_CLOCKS
ARM: davinci_all_defconfig: set CONFIG_BACKLIGHT_PWM=m
Signed-off-by: Olof Johansson <olof@lixom.net>
for 4.19, please pull the following:
- Stefan enables the Raspberry Pi voltage sensor driver (HWMON) in both
multi_v7_defconfig and bcm2835_defconfig
-----BEGIN PGP SIGNATURE-----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=C2uA
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.19/defconfig' of https://github.com/Broadcom/stblinux into next/defconfig
This pull request contains Broadcom ARM-based SoCs defconfig updates
for 4.19, please pull the following:
- Stefan enables the Raspberry Pi voltage sensor driver (HWMON) in both
multi_v7_defconfig and bcm2835_defconfig
* tag 'arm-soc/for-4.19/defconfig' of https://github.com/Broadcom/stblinux:
ARM: multi_v7_defconfig: Enable RPi voltage sensor
ARM: bcm2835_defconfig: Enable RPi voltage sensor
Signed-off-by: Olof Johansson <olof@lixom.net>
Enable the STM32 Real Time Clock (RTC) driver, implemented on STM32MP1 SoC.
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Enable few options which are required to boot typical Linux distro. It
was tested by booting ArchLinux ARM from sdcard.
Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Enable config options required for Samsung Aries based phones.
ARM_APPENDED_DTB is also needed, because stock bootloader does not
support loading DTB files.
Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Cleanup the config with savedefconfig.
Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The cros-ec I2C and SPI transport drivers have been moved from MFD
subsystem to platform/chrome, at the same time, the config symbol has
been renamed and lost the MFD_ prefix, so update all configs to the new
config symbol name.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Benson Leung <bleung@chromium.org>
- A couple of imx defconfig updates selecting USB ULPI support to fix
a regression seen with USB driver, which is caused by commit
03e6275ae3 ("usb: chipidea: Fix ULPI on imx51").
- A fix on imx51-zii-rdu1 board touchscreen pinctrl setting, which
causes an interrupt storm.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJbO3x0AAoJEFBXWFqHsHzODGkIAIIJFPOWBYHyxAVLAtqpNTt7
+Yggu9LGe7rhspT+Hi2DocKIEj1Z11x49KJCqxwrEHg+7xyax6d78b1iclCHLRlr
S9jxulipzkBs/neebrhh6cyF8sxA7TPUgXtEMdRJwYygUoZhe9hngTO3jv+xoDky
l1l9zH9gAlAQA1cxN6Z4ZWYDkNS0mYK3e1VzaeyCXsq5GJ1Vm5Qw1ooTE5DL3K1g
5B2Hw057DJvcSwOhIVir/MQR8sAWj1sKYdsCouxrO/ThEyofEAtfn22romcPaGPW
WBOuTNrOrMy6O/+ndMBNJBXeGt1tONL2cjLbrpffaXJYq6m/56efsee9u1u18Vg=
=4Agh
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-4.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes
i.MX fixes for 4.18, round 2:
- A couple of imx defconfig updates selecting USB ULPI support to fix
a regression seen with USB driver, which is caused by commit
03e6275ae3 ("usb: chipidea: Fix ULPI on imx51").
- A fix on imx51-zii-rdu1 board touchscreen pinctrl setting, which
causes an interrupt storm.
* tag 'imx-fixes-4.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx_v4_v5_defconfig: Select ULPI support
ARM: imx_v6_v7_defconfig: Select ULPI support
ARM: dts: imx51-zii-rdu1: fix touchscreen pinctrl
Signed-off-by: Olof Johansson <olof@lixom.net>
Select CONFIG_USB_CHIPIDEA_ULPI and CONFIG_USB_ULPI_BUS so that
USB ULPI can be functional on some boards like that use ULPI
interface.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Select CONFIG_USB_CHIPIDEA_ULPI and CONFIG_USB_ULPI_BUS so that
USB ULPI can be functional on some boards like imx51-babbge.
This fixes a kernel hang in 4.18-rc1 on i.mx51-babbage, caused by commit
03e6275ae3 ("usb: chipidea: Fix ULPI on imx51").
Suggested-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable CONFIG_MMC_SDHCI_OMAP so that TI's K2G SoC
can use sdhci-omap driver for MMC/SD controller.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
This enables Bluetooth modules in davinic_all_defconfig needed for LEGO
MINDSTORMS EV3.
Build CONFIG_SERIAL_DEV_BUS into the kernel since SERIAL_DEV_CTRL_TTYPORT
requires it so.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Enable micrel and dp83867 phys for K2G Boards in keystone_defconfig
to support Network driver on these boards (K2G ICE and GP EVM).
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
This removes CONFIG_DAVINCI_RESET_CLOCKS. The option has been removed from
the kernel.
Signed-off-by: David Lechner <david@lechnology.com>
Reviewed-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
The defconfig has drifted over time, as Kconfig entries have changed order
or default values. Several maintainers ended up running 'savedefconfig'
themselves which caused a cascade of conflicts. Let's do it once and
for all in our tree before -rc2 instead.
Signed-off-by: Olof Johansson <olof@lixom.net>
The patch enables the hwmon driver for the Raspberry Pi.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
The patch enables the hwmon driver for the Raspberry Pi.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
The da850-evm came with an LCD with a backlight tied to a pwm. This
enables CONFIG_BACKLIGHT_PWM as a module so the PWM backlight can be
used to maintain brightness control of the backlight.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
