Update the core sqsize field in addition to the PCIe-specific
q_depth field as the core tagset allocation helpers rely on it.
Fixes: 0da7feaa59 ("nvme-pci: use the tagset alloc/free helpers")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Hugh Dickins <hughd@google.com>
Link: https://lore.kernel.org/r/20221225103234.226794-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
While the CAP.MQES field in NVMe is a 0s based filed with a natural one
off, we also need to account for the queue wrap condition and fix undo
the one off again in nvme_alloc_io_tag_set. This was never properly
done by the fabrics drivers, but they don't seem to care because there
is no actual physical queue that can wrap around, but it became a
problem when converting over the PCIe driver. Also add back the
BLK_MQ_MAX_DEPTH check that was lost in the same commit.
Fixes: 0da7feaa59 ("nvme-pci: use the tagset alloc/free helpers")
Reported-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Hugh Dickins <hughd@google.com>
Link: https://lore.kernel.org/r/20221225103234.226794-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The size allocated out of the dma pool is at most NVME_CTRL_PAGE_SIZE,
which may be smaller than the PAGE_SIZE.
Fixes: c61b82c7b7 ("nvme-pci: fix PRP pool size")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Convert the max size to bytes to match the units of the divisor that
calculates the worst-case number of PRP entries.
The result is used to determine how many PRP Lists are required. The
code was previously rounding this to 1 list, but we can require 2 in the
worst case. In that scenario, the driver would corrupt memory beyond the
size provided by the mempool.
While unlikely to occur (you'd need a 4MB in exactly 127 phys segments
on a queue that doesn't support SGLs), this memory corruption has been
observed by kfence.
Cc: Jens Axboe <axboe@kernel.dk>
Fixes: 943e942e62 ("nvme-pci: limit max IO size and segments to avoid high order allocations")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
When using shadow doorbells, the event index and the doorbell values are
written to host memory. Prior to this patch, the values written would
erroneously be written in host endianness. This causes trouble on
big-endian platforms. Fix this by adding missing endian conversions.
This issue was noticed by Guenter while testing various big-endian
platforms under QEMU[1]. A similar fix required for hw/nvme in QEMU is
up for review as well[2].
[1]: https://lore.kernel.org/qemu-devel/20221209110022.GA3396194@roeck-us.net/
[2]: https://lore.kernel.org/qemu-devel/20221212114409.34972-4-its@irrelevant.dk/
Fixes: f9f38e3338 ("nvme: improve performance for virtual NVMe devices")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
-----BEGIN PGP SIGNATURE-----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=k/vv
-----END PGP SIGNATURE-----
Merge tag 'for-6.2/block-2022-12-08' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- NVMe pull requests via Christoph:
- Support some passthrough commands without CAP_SYS_ADMIN (Kanchan
Joshi)
- Refactor PCIe probing and reset (Christoph Hellwig)
- Various fabrics authentication fixes and improvements (Sagi
Grimberg)
- Avoid fallback to sequential scan due to transient issues (Uday
Shankar)
- Implement support for the DEAC bit in Write Zeroes (Christoph
Hellwig)
- Allow overriding the IEEE OUI and firmware revision in configfs
for nvmet (Aleksandr Miloserdov)
- Force reconnect when number of queue changes in nvmet (Daniel
Wagner)
- Minor fixes and improvements (Uros Bizjak, Joel Granados, Sagi
Grimberg, Christoph Hellwig, Christophe JAILLET)
- Fix and cleanup nvme-fc req allocation (Chaitanya Kulkarni)
- Use the common tagset helpers in nvme-pci driver (Christoph
Hellwig)
- Cleanup the nvme-pci removal path (Christoph Hellwig)
- Use kstrtobool() instead of strtobool (Christophe JAILLET)
- Allow unprivileged passthrough of Identify Controller (Joel
Granados)
- Support io stats on the mpath device (Sagi Grimberg)
- Minor nvmet cleanup (Sagi Grimberg)
- MD pull requests via Song:
- Code cleanups (Christoph)
- Various fixes
- Floppy pull request from Denis:
- Fix a memory leak in the init error path (Yuan)
- Series fixing some batch wakeup issues with sbitmap (Gabriel)
- Removal of the pktcdvd driver that was deprecated more than 5 years
ago, and subsequent removal of the devnode callback in struct
block_device_operations as no users are now left (Greg)
- Fix for partition read on an exclusively opened bdev (Jan)
- Series of elevator API cleanups (Jinlong, Christoph)
- Series of fixes and cleanups for blk-iocost (Kemeng)
- Series of fixes and cleanups for blk-throttle (Kemeng)
- Series adding concurrent support for sync queues in BFQ (Yu)
- Series bringing drbd a bit closer to the out-of-tree maintained
version (Christian, Joel, Lars, Philipp)
- Misc drbd fixes (Wang)
- blk-wbt fixes and tweaks for enable/disable (Yu)
- Fixes for mq-deadline for zoned devices (Damien)
- Add support for read-only and offline zones for null_blk
(Shin'ichiro)
- Series fixing the delayed holder tracking, as used by DM (Yu,
Christoph)
- Series enabling bio alloc caching for IRQ based IO (Pavel)
- Series enabling userspace peer-to-peer DMA (Logan)
- BFQ waker fixes (Khazhismel)
- Series fixing elevator refcount issues (Christoph, Jinlong)
- Series cleaning up references around queue destruction (Christoph)
- Series doing quiesce by tagset, enabling cleanups in drivers
(Christoph, Chao)
- Series untangling the queue kobject and queue references (Christoph)
- Misc fixes and cleanups (Bart, David, Dawei, Jinlong, Kemeng, Ye,
Yang, Waiman, Shin'ichiro, Randy, Pankaj, Christoph)
* tag 'for-6.2/block-2022-12-08' of git://git.kernel.dk/linux: (247 commits)
blktrace: Fix output non-blktrace event when blk_classic option enabled
block: sed-opal: Don't include <linux/kernel.h>
sed-opal: allow using IOC_OPAL_SAVE for locking too
blk-cgroup: Fix typo in comment
block: remove bio_set_op_attrs
nvmet: don't open-code NVME_NS_ATTR_RO enumeration
nvme-pci: use the tagset alloc/free helpers
nvme: add the Apple shared tag workaround to nvme_alloc_io_tag_set
nvme: only set reserved_tags in nvme_alloc_io_tag_set for fabrics controllers
nvme: consolidate setting the tagset flags
nvme: pass nr_maps explicitly to nvme_alloc_io_tag_set
block: bio_copy_data_iter
nvme-pci: split out a nvme_pci_ctrl_is_dead helper
nvme-pci: return early on ctrl state mismatch in nvme_reset_work
nvme-pci: rename nvme_disable_io_queues
nvme-pci: cleanup nvme_suspend_queue
nvme-pci: remove nvme_pci_disable
nvme-pci: remove nvme_disable_admin_queue
nvme: merge nvme_shutdown_ctrl into nvme_disable_ctrl
nvme: use nvme_wait_ready in nvme_shutdown_ctrl
...
direction misannotations and (hopefully) preventing
more of the same for the future.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
iHQEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCY5ZzQAAKCRBZ7Krx/gZQ
65RZAP4nTkvOn0NZLVFkuGOx8pgJelXAvrteyAuecVL8V6CR4AD40qCVY51PJp8N
MzwiRTeqnGDxTTF7mgd//IB6hoatAA==
=bcvF
-----END PGP SIGNATURE-----
Merge tag 'pull-iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull iov_iter updates from Al Viro:
"iov_iter work; most of that is about getting rid of direction
misannotations and (hopefully) preventing more of the same for the
future"
* tag 'pull-iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
use less confusing names for iov_iter direction initializers
iov_iter: saner checks for attempt to copy to/from iterator
[xen] fix "direction" argument of iov_iter_kvec()
[vhost] fix 'direction' argument of iov_iter_{init,bvec}()
[target] fix iov_iter_bvec() "direction" argument
[s390] memcpy_real(): WRITE is "data source", not destination...
[s390] zcore: WRITE is "data source", not destination...
[infiniband] READ is "data destination", not source...
[fsi] WRITE is "data source", not destination...
[s390] copy_oldmem_kernel() - WRITE is "data source", not destination
csum_and_copy_to_iter(): handle ITER_DISCARD
get rid of unlikely() on page_copy_sane() calls
-----BEGIN PGP SIGNATURE-----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=JkGh
-----END PGP SIGNATURE-----
Merge tag 'block-6.1-2022-12-08' of git://git.kernel.dk/linux
Pull block fix from Jens Axboe:
"A small fix for initializing the NVMe quirks before initializing the
subsystem"
* tag 'block-6.1-2022-12-08' of git://git.kernel.dk/linux:
nvme initialize core quirks before calling nvme_init_subsystem
Use the common helpers to allocate and free the tagsets. To make this
work the generic nvme_ctrl now needs to be stored in the hctx private
data instead of the nvme_dev.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Add the apple shared tag workaround to nvme_alloc_io_tag_set to prepare
for using that helper in the PCIe driver.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
The reserved_tags are only needed for fabrics controllers. Right now only
fabrics drivers call this helper, so this is harmless, but we'll use it
in the PCIe driver soon.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
All nvme transports should be using the same flags for their tagsets,
with the exception for the blocking flag that should only be set for
transports that can block in ->queue_rq.
Add a NVME_F_BLOCKING flag to nvme_ctrl_ops to control the blocking
behavior and lift setting the flags into nvme_alloc_{admin,io}_tag_set.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Don't look at ctrl->ops as only RDMA and TCP actually support multiple
maps.
Fixes: 6dfba1c09c ("nvme-fc: use the tagset alloc/free helpers")
Fixes: ceee1953f9 ("nvme-loop: use the tagset alloc/free helpers")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Clean up nvme_dev_disable by splitting the logic to detect if a
controller is dead into a separate helper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
The only way nvme_reset_work could be called when not in resetting state
is if a reset and remove happen near the same time. This should not
happen, but if it did we don't want the reset work to disable the
controller because the remove is already doing that.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
This function really deletes the I/O queues, so rename it to match
the functionality. Also move the main wrapper right next to the
actual underlying implementation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Remove the unused returne value, pass a dev + qid instead of the queue
as that is better for the callers as well as the function itself, and
remove the entirely pointless kerneldoc comment.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
nvme_pci_disable has a single caller, fold it into that.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Eric Curtin <ecurtin@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
nvme_disable_admin_queue has only a single caller, and just calls two
other funtions, so remove it to clean up the remove path a little more.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Eric Curtin <ecurtin@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Many of the callers decide which one to use based on a bool argument and
there is at least some code to be shared, so merge these two. Also
move a comment specific to a single callsite to that callsite.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hector Martin <marcan@marcan.st>
Refactor the code to wait for CSTS state changes so that it can be reused
by nvme_shutdown_ctrl. This reduces the delay between each iteration
that checks CSTS from 100ms in the shutdown code to the 1 to 2ms range
done during enable, matching the changes from commit 3e98c2443f that
were only applied to the enable/disable path.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Pankaj Raghav <p.raghav@samsung.com>
nvme_shutdown_ctrl already shuts the controller down, there is no
need to also call nvme_disable_ctrl for the shutdown case.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Eric Curtin <ecurtin@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hector Martin <marcan@marcan.st>
Add a helper to move the duplicate code for error message
from nvme_fc_rcv_ls_req() to nvme_fc_rcv_ls_req_err_msg().
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Before using dynamically allcoated variable lsop in the
nvme_fc_rcv_ls_req(), add a check for NULL and error out early.
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Add unprivileged passthrough of the I/O Command Set Independent and I/O
Command Set Specific Identify Controller sub-command.
This will allow access to attributes (e.g. MDTS and WZSL) that are needed
to effectively form passthrough I/O to the /dev/ng* character devices.
Signed-off-by: Joel Granados <j.granados@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Our mpath stack device is just a shim that selects a bottom namespace
and submits the bio to it without any fancy splitting. This also means
that we don't clone the bio or have any context to the bio beyond
submission. However it really sucks that we don't see the mpath device
io stats.
Given that the mpath device can't do that without adding some context
to it, we let the bottom device do it on its behalf (somewhat similar
to the approach taken in nvme_trace_bio_complete).
When the IO starts, we account the request for multipath IO stats using
REQ_NVME_MPATH_IO_STATS nvme_request flag to avoid queue io stats disable
in the middle of the request.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
In preparation for nvme-multipath IO stats accounting, we want the
accounting to happen in a centralized place. The request completion
is already centralized, but we need a common helper to request I/O
start.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
strtobool() is the same as kstrtobool().
However, the latter is more used within the kernel.
In order to remove strtobool() and slightly simplify kstrtox.h, switch to
the other function name.
While at it, include the corresponding header file (<linux/kstrtox.h>)
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The NVMe drivers support a mode where no tagset is allocated for the I/O
queues and only the admin queue is usable. In that case ctrl->tagset is
NULL and we must not call the block per-tagset quiesce helpers that
dereference it.
Fixes: 98d81f0df7 ("nvme: use blk_mq_[un]quiesce_tagset")
Reported-by: Gerd Bayer <gbayer@linux.ibm.com>
Reported-by: Chao Leng <lengchao@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chao Leng <lengchao@huawei.com>
A device might have a core quirk for NVME_QUIRK_IGNORE_DEV_SUBNQN
(such as Samsung X5) but it would still give a:
"missing or invalid SUBNQN field"
warning as core quirks are filled after calling nvme_init_subnqn. Fill
ctrl->quirks from struct core_quirks before calling nvme_init_subsystem
to fix this.
Tested on a Samsung X5.
Fixes: ab9e00cc72 ("nvme: track subsystems")
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
-----BEGIN PGP SIGNATURE-----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=Gdkx
-----END PGP SIGNATURE-----
Merge tag 'block-6.1-2022-12-02' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
"Just a small NVMe merge for this week, fixing protection of the name
space list, and a missing clear of a reserved field when unused"
* tag 'block-6.1-2022-12-02' of git://git.kernel.dk/linux:
nvme: fix SRCU protection of nvme_ns_head list
nvme-pci: clear the prp2 field when not used
If the prp2 field is not filled in nvme_setup_prp_simple(), the prp2
field is garbage data. According to nvme spec, the prp2 is reserved if
the data transfer does not cross a memory page boundary, so clear it to
zero if it is not used.
Signed-off-by: Lei Rao <lei.rao@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
READ/WRITE proved to be actively confusing - the meanings are
"data destination, as used with read(2)" and "data source, as
used with write(2)", but people keep interpreting those as
"we read data from it" and "we write data to it", i.e. exactly
the wrong way.
Call them ITER_DEST and ITER_SOURCE - at least that is harder
to misinterpret...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Allow user to set currently active firmware revision
Reviewed-by: Konstantin Shelekhin <k.shelekhin@yadro.com>
Reviewed-by: Dmitriy Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Aleksandr Miloserdov <a.miloserdov@yadro.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Allow user to set OUI for the controller vendor.
Reviewed-by: Konstantin Shelekhin <k.shelekhin@yadro.com>
Reviewed-by: Dmitriy Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Aleksandr Miloserdov <a.miloserdov@yadro.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
-----BEGIN PGP SIGNATURE-----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=sOGG
-----END PGP SIGNATURE-----
Merge tag 'block-6.1-2022-11-18' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
- NVMe pull request via Christoph:
- Two more bogus nid quirks (Bean Huo, Tiago Dias Ferreira)
- Memory leak fix in nvmet (Sagi Grimberg)
- Regression fix for block cgroups pinning the wrong blkcg, causing
leaks of cgroups and blkcgs (Chris)
- UAF fix for drbd setup error handling (Dan)
- Fix DMA alignment propagation in DM (Keith)
* tag 'block-6.1-2022-11-18' of git://git.kernel.dk/linux:
dm-log-writes: set dma_alignment limit in io_hints
dm-integrity: set dma_alignment limit in io_hints
block: make blk_set_default_limits() private
dm-crypt: provide dma_alignment limit in io_hints
block: make dma_alignment a stacking queue_limit
nvmet: fix a memory leak in nvmet_auth_set_key
nvme-pci: add NVME_QUIRK_BOGUS_NID for Netac NV7000
drbd: use after free in drbd_create_device()
nvme-pci: add NVME_QUIRK_BOGUS_NID for Micron Nitro
blk-cgroup: properly pin the parent in blkcg_css_online
Naming the nvme helpers that wrap the block quiesce functionality
_start/_stop is rather confusing. Switch to using the quiesce naming
used by the block layer instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
In nvme_init_non_mdts_limits function we were returning 0 when kzalloc
failed; it now returns -ENOMEM.
Fixes: 5befc7c26e ("nvme: implement non-mdts command limits")
Signed-off-by: Joel Granados <j.granados@samsung.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Currently, if nvme_scan_ns_list fails, nvme_scan_work will fall back to
a sequential scan. nvme_scan_ns_list can fail for a variety of reasons,
e.g. a transient transport issue, and the resulting sequential scan can
be extremely expensive on controllers reporting an NN value close to the
maximum allowed (> 4 billion). Avoid sequential scans wherever possible
by only falling back to them in two cases:
- When the NVMe version supported (VS) value reported by the device is
older than NVME_VS(1, 1, 0), before which support of Identify NS List
not required.
- When the Identify NS List command fails with the DNR bit set in the
status. This is to accommodate (non-compliant) devices which report a
VS value which implies support for Identify NS List, but nevertheless
do not support the command. Such devices will most likely fail the
command with the DNR bit set.
The third case is when the device claims support for Identify NS List
but the command fails with DNR not set. In such cases, fallback to
sequential scan is potentially expensive and likely unnecessary, as a
retry of the list scan should succeed. So this change skips the fallback
in this third case.
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
when starting error recovery there might be a authentication work
running, and it involves I/O commands. Given the controller is tearing
down there is no chance for the I/O to complete other than timing out
which may unnecessarily take a full io timeout.
So first tear down the queues, fail/cancel all inflight I/O (including
potentially authentication) and only then stop authentication. This
ensures that failover is not stalled due to blocked authentication I/O.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
when starting error recovery there might be a authentication work
running, and it involves I/O commands. Given the controller is tearing
down there is no chance for the I/O to complete other than timing out
which may unnecessarily take a full io timeout.
So first tear down the queues, fail/cancel all inflight I/O (including
potentially authentication) and only then stop authentication. This
ensures that failover is not stalled due to blocked authentication I/O.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
It triggered the queue authentication work elements in parallel, but
the ctrl authentication work itself completes when all of them
completes. Hence wait for queues auth completions.
This also makes nvme_auth_stop simply a sync cancel of ctrl
dhchap_auth_work.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
only ctrl deletion calls nvme_auth_free, which was stopped prior in the
teardown stage, so there is no possibility that it should ever run when
nvme_auth_free is called. As a result, we can remove a local chap pointer
variable.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
We know exactly how many dhchap contexts we will need, there is no need
to hold a list that we need to protect with a mutex. Convert to
a dynamically allocated array. And dhchap_context access state is
maintained by the chap itself.
Make dhchap_auth_mutex protect only the ctrl host_key and ctrl_key
in a fine-grained lock such that there is no long lasting acquisition
of the lock and no need to take/release this lock when flushing
authentication works.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
ctrl ctrl_key member may be overwritten from a sysfs context driven
by the user. Once a queue local copy was created, use that instead
to minimize checks on a shared resource.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Now that the chap context is reset upon completion, this is no longer
needed. Also remove nvme_auth_reset as no callers are left.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
