mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-15 00:04:15 +08:00
888d3c9f7f
10 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Liu Shixin
|
85a34107eb |
mm/shuffle: convert module_param_call to module_param_cb
module_param_call is now completely consistent with module_param_cb, so there is no need to keep two macros. Convert module_param_call to module_param_cb since former is obsolete and latter is more kernel-ish. Link: https://lkml.kernel.org/r/20220909083947.3595610-1-liushixin2@huawei.com Signed-off-by: Liu Shixin <liushixin2@huawei.com> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Liu Shixin <liushixin2@huawei.com> Cc: Paul Russel <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Randy Dunlap
|
845be1cd34 |
mm: eliminate "expecting prototype" kernel-doc warnings
Fix stray kernel-doc warnings in mm/ due to mis-typed or missing function names. Quietens these kernel-doc warnings: mm/mmu_gather.c:264: warning: expecting prototype for tlb_gather_mmu(). Prototype was for __tlb_gather_mmu() instead mm/oom_kill.c:180: warning: expecting prototype for Check whether unreclaimable slab amount is greater than(). Prototype was for should_dump_unreclaim_slab() instead mm/shuffle.c:155: warning: expecting prototype for shuffle_free_memory(). Prototype was for __shuffle_free_memory() instead Link: https://lkml.kernel.org/r/20210411210642.11362-1-rdunlap@infradead.org Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Matthew Wilcox (Oracle)
|
ab130f9108 |
mm: rename page_order() to buddy_order()
The current page_order() can only be called on pages in the buddy allocator. For compound pages, you have to use compound_order(). This is confusing and led to a bug, so rename page_order() to buddy_order(). Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Link: https://lkml.kernel.org/r/20201001152259.14932-2-willy@infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
David Hildenbrand
|
839195352d |
mm/shuffle: remove dynamic reconfiguration
Commit
|
||
|
David Hildenbrand
|
4a93025cbe |
mm/shuffle: don't move pages between zones and don't read garbage memmaps
Especially with memory hotplug, we can have offline sections (with a
garbage memmap) and overlapping zones. We have to make sure to only touch
initialized memmaps (online sections managed by the buddy) and that the
zone matches, to not move pages between zones.
To test if this can actually happen, I added a simple
BUG_ON(page_zone(page_i) != page_zone(page_j));
right before the swap. When hotplugging a 256M DIMM to a 4G x86-64 VM and
onlining the first memory block "online_movable" and the second memory
block "online_kernel", it will trigger the BUG, as both zones (NORMAL and
MOVABLE) overlap.
This might result in all kinds of weird situations (e.g., double
allocations, list corruptions, unmovable allocations ending up in the
movable zone).
Fixes:
|
||
Alexander Duyck
|
a2129f2479 |
mm: adjust shuffle code to allow for future coalescing
Patch series "mm / virtio: Provide support for free page reporting", v17.
This series provides an asynchronous means of reporting free guest pages
to a hypervisor so that the memory associated with those pages can be
dropped and reused by other processes and/or guests on the host. Using
this it is possible to avoid unnecessary I/O to disk and greatly improve
performance in the case of memory overcommit on the host.
When enabled we will be performing a scan of free memory every 2 seconds
while pages of sufficiently high order are being freed. In each pass at
least one sixteenth of each free list will be reported. By doing this we
avoid racing against other threads that may be causing a high amount of
memory churn.
The lowest page order currently scanned when reporting pages is
pageblock_order so that this feature will not interfere with the use of
Transparent Huge Pages in the case of virtualization.
Currently this is only in use by virtio-balloon however there is the hope
that at some point in the future other hypervisors might be able to make
use of it. In the virtio-balloon/QEMU implementation the hypervisor is
currently using MADV_DONTNEED to indicate to the host kernel that the page
is currently free. It will be zeroed and faulted back into the guest the
next time the page is accessed.
To track if a page is reported or not the Uptodate flag was repurposed and
used as a Reported flag for Buddy pages. We walk though the free list
isolating pages and adding them to the scatterlist until we either
encounter the end of the list or have processed at least one sixteenth of
the pages that were listed in nr_free prior to us starting. If we fill
the scatterlist before we reach the end of the list we rotate the list so
that the first unreported page we encounter is moved to the head of the
list as that is where we will resume after we have freed the reported
pages back into the tail of the list.
Below are the results from various benchmarks. I primarily focused on two
tests. The first is the will-it-scale/page_fault2 test, and the other is
a modified version of will-it-scale/page_fault1 that was enabled to use
THP. I did this as it allows for better visibility into different parts
of the memory subsystem. The guest is running with 32G for RAM on one
node of a E5-2630 v3. The host has had some features such as CPU turbo
disabled in the BIOS.
Test page_fault1 (THP) page_fault2
Name tasks Process Iter STDEV Process Iter STDEV
Baseline 1 1012402.50 0.14% 361855.25 0.81%
16 8827457.25 0.09% 3282347.00 0.34%
Patches Applied 1 1007897.00 0.23% 361887.00 0.26%
16 8784741.75 0.39% 3240669.25 0.48%
Patches Enabled 1 1010227.50 0.39% 359749.25 0.56%
16 8756219.00 0.24% 3226608.75 0.97%
Patches Enabled 1 1050982.00 4.26% 357966.25 0.14%
page shuffle 16 8672601.25 0.49% 3223177.75 0.40%
Patches enabled 1 1003238.00 0.22% 360211.00 0.22%
shuffle w/ RFC 16 8767010.50 0.32% 3199874.00 0.71%
The results above are for a baseline with a linux-next-20191219 kernel,
that kernel with this patch set applied but page reporting disabled in
virtio-balloon, the patches applied and page reporting fully enabled, the
patches enabled with page shuffling enabled, and the patches applied with
page shuffling enabled and an RFC patch that makes used of MADV_FREE in
QEMU. These results include the deviation seen between the average value
reported here versus the high and/or low value. I observed that during
the test memory usage for the first three tests never dropped whereas with
the patches fully enabled the VM would drop to using only a few GB of the
host's memory when switching from memhog to page fault tests.
Any of the overhead visible with this patch set enabled seems due to page
faults caused by accessing the reported pages and the host zeroing the
page before giving it back to the guest. This overhead is much more
visible when using THP than with standard 4K pages. In addition page
shuffling seemed to increase the amount of faults generated due to an
increase in memory churn. The overehad is reduced when using MADV_FREE as
we can avoid the extra zeroing of the pages when they are reintroduced to
the host, as can be seen when the RFC is applied with shuffling enabled.
The overall guest size is kept fairly small to only a few GB while the
test is running. If the host memory were oversubscribed this patch set
should result in a performance improvement as swapping memory in the host
can be avoided.
A brief history on the background of free page reporting can be found at:
https://lore.kernel.org/lkml/29f43d5796feed0dec8e8bb98b187d9dac03b900.camel@linux.intel.com/
This patch (of 9):
Move the head/tail adding logic out of the shuffle code and into the
__free_one_page function since ultimately that is where it is really
needed anyway. By doing this we should be able to reduce the overhead and
can consolidate all of the list addition bits in one spot.
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Yang Zhang <yang.zhang.wz@gmail.com>
Cc: Pankaj Gupta <pagupta@redhat.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Nitesh Narayan Lal <nitesh@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Wei Wang <wei.w.wang@intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: wei qi <weiqi4@huawei.com>
Link: http://lkml.kernel.org/r/20200211224602.29318.84523.stgit@localhost.localdomain
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
Pingfan Liu
|
e03d1f7834 |
mm/sparse: rename pfn_present() to pfn_in_present_section()
After introducing mem sub section concept, pfn_present() loses its literal meaning, and will not be necessary a truth on partial populated mem section. Since all of the callers use it to judge an absent section, it is better to rename pfn_present() as pfn_in_present_section(). Signed-off-by: Pingfan Liu <kernelfans@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc] Cc: Dan Williams <dan.j.williams@intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Leonardo Bras <leonardo@linux.ibm.com> Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com> Cc: Nathan Lynch <nathanl@linux.ibm.com> Link: http://lkml.kernel.org/r/1581919110-29575-1-git-send-email-kernelfans@gmail.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Yi Wang
|
758b8db4a5 |
mm: fix -Wmissing-prototypes warnings
We get two warnings when build kernel W=1: mm/shuffle.c:36:12: warning: no previous prototype for `shuffle_show' [-Wmissing-prototypes] mm/sparse.c:220:6: warning: no previous prototype for `subsection_mask_set' [-Wmissing-prototypes] Make the functions static to fix this. Link: http://lkml.kernel.org/r/1566978161-7293-1-git-send-email-wang.yi59@zte.com.cn Signed-off-by: Yi Wang <wang.yi59@zte.com.cn> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Dan Williams
|
97500a4a54 |
mm: maintain randomization of page free lists
When freeing a page with an order >= shuffle_page_order randomly select the front or back of the list for insertion. While the mm tries to defragment physical pages into huge pages this can tend to make the page allocator more predictable over time. Inject the front-back randomness to preserve the initial randomness established by shuffle_free_memory() when the kernel was booted. The overhead of this manipulation is constrained by only being applied for MAX_ORDER sized pages by default. [akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/154899812788.3165233.9066631950746578517.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Kees Cook <keescook@chromium.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Robert Elliott <elliott@hpe.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Dan Williams
|
e900a918b0 |
mm: shuffle initial free memory to improve memory-side-cache utilization
Patch series "mm: Randomize free memory", v10.
This patch (of 3):
Randomization of the page allocator improves the average utilization of
a direct-mapped memory-side-cache. Memory side caching is a platform
capability that Linux has been previously exposed to in HPC
(high-performance computing) environments on specialty platforms. In
that instance it was a smaller pool of high-bandwidth-memory relative to
higher-capacity / lower-bandwidth DRAM. Now, this capability is going
to be found on general purpose server platforms where DRAM is a cache in
front of higher latency persistent memory [1].
Robert offered an explanation of the state of the art of Linux
interactions with memory-side-caches [2], and I copy it here:
It's been a problem in the HPC space:
http://www.nersc.gov/research-and-development/knl-cache-mode-performance-coe/
A kernel module called zonesort is available to try to help:
https://software.intel.com/en-us/articles/xeon-phi-software
and this abandoned patch series proposed that for the kernel:
https://lkml.kernel.org/r/20170823100205.17311-1-lukasz.daniluk@intel.com
Dan's patch series doesn't attempt to ensure buffers won't conflict, but
also reduces the chance that the buffers will. This will make performance
more consistent, albeit slower than "optimal" (which is near impossible
to attain in a general-purpose kernel). That's better than forcing
users to deploy remedies like:
"To eliminate this gradual degradation, we have added a Stream
measurement to the Node Health Check that follows each job;
nodes are rebooted whenever their measured memory bandwidth
falls below 300 GB/s."
A replacement for zonesort was merged upstream in commit
|