This is the recovery side of the btree block owner change operation
performed by swapext on CRC enabled filesystems. We detect that an
owner change is needed by the flag that has been placed on the inode
log format flag field. Because the inode recovery is being replayed
after the buffers that make up the BMBT in the given checkpoint, we
can walk all the buffers and directly modify them when we see the
flag set on an inode.
Because the inode can be relogged and hence present in multiple
chekpoints with the "change owner" flag set, we could do multiple
passes across the inode to do this change. While this isn't optimal,
we can't directly ignore the flag as there may be multiple
independent swap extent operations being replayed on the same inode
in different checkpoints so we can't ignore them.
Further, because the owner change operation uses ordered buffers, we
might have buffers that are newer on disk than the current
checkpoint and so already have the owner changed in them. Hence we
cannot just peek at a buffer in the tree and check that it has the
correct owner and assume that the change was completed.
So, for the moment just brute force the owner change every time we
see an inode with the flag set. Note that we have to be careful here
because the owner of the buffers may point to either the old owner
or the new owner. Currently the verifier can't verify the owner
directly, so there is no failure case here right now. If we verify
the owner exactly in future, then we'll have to take this into
account.
This was tested in terms of normal operation via xfstests - all of
the fsr tests now pass without failure. however, we really need to
modify xfs/227 to stress v3 inodes correctly to ensure we fully
cover this case for v5 filesystems.
In terms of recovery testing, I used a hacked version of xfs_fsr
that held the temp inode open for a few seconds before exiting so
that the filesystem could be shut down with an open owner change
recovery flags set on at least the temp inode. fsr leaves the temp
inode unlinked and in btree format, so this was necessary for the
owner change to be reliably replayed.
logprint confirmed the tmp inode in the log had the correct flag set:
INO: cnt:3 total:3 a:0x69e9e0 len:56 a:0x69ea20 len:176 a:0x69eae0 len:88
INODE: #regs:3 ino:0x44 flags:0x209 dsize:88
^^^^^
0x200 is set, indicating a data fork owner change needed to be
replayed on inode 0x44. A printk in the revoery code confirmed that
the inode change was recovered:
XFS (vdc): Mounting Filesystem
XFS (vdc): Starting recovery (logdev: internal)
recovering owner change ino 0x44
XFS (vdc): Version 5 superblock detected. This kernel L support enabled!
Use of these features in this kernel is at your own risk!
XFS (vdc): Ending recovery (logdev: internal)
The script used to test this was:
$ cat ./recovery-fsr.sh
#!/bin/bash
dev=/dev/vdc
mntpt=/mnt/scratch
testfile=$mntpt/testfile
umount $mntpt
mkfs.xfs -f -m crc=1 $dev
mount $dev $mntpt
chmod 777 $mntpt
for i in `seq 10000 -1 0`; do
xfs_io -f -d -c "pwrite $(($i * 4096)) 4096" $testfile > /dev/null 2>&1
done
xfs_bmap -vp $testfile |head -20
xfs_fsr -d -v $testfile &
sleep 10
/home/dave/src/xfstests-dev/src/godown -f $mntpt
wait
umount $mntpt
xfs_logprint -t $dev |tail -20
time mount $dev $mntpt
xfs_bmap -vp $testfile
umount $mntpt
$
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
For CRC enabled filesystems, we can't just swap inode forks from one
inode to another when defragmenting a file - the blocks in the inode
fork bmap btree contain pointers back to the owner inode. Hence if
we are to swap the inode forks we have to atomically modify every
block in the btree during the transaction.
We are doing an entire fork swap here, so we could create a new
transaction item type that indicates we are changing the owner of a
certain structure from one value to another. If we combine this with
ordered buffer logging to modify all the buffers in the tree, then
we can change the buffers in the tree without needing log space for
the operation. However, this then requires log recovery to perform
the modification of the owner information of the objects/structures
in question.
This does introduce some interesting ordering details into recovery:
we have to make sure that the owner change replay occurs after the
change that moves the objects is made, not before. Hence we can't
use a separate log item for this as we have no guarantee of strict
ordering between multiple items in the log due to the relogging
action of asynchronous transaction commits. Hence there is no
"generic" method we can use for changing the ownership of arbitrary
metadata structures.
For inode forks, however, there is a simple method of communicating
that the fork contents need the owner rewritten - we can pass a
inode log format flag for the fork for the transaction that does a
fork swap. This flag will then follow the inode fork through
relogging actions so when the swap actually gets replayed the
ownership can be changed immediately by log recovery. So that gives
us a simple method of "whole fork" exchange between two inodes.
This is relatively simple to implement, so it makes sense to do this
as an initial implementation to support xfs_fsr on CRC enabled
filesytems in the same manner as we do on existing filesystems. This
commit introduces the swapext driven functionality, the recovery
functionality will be in a separate patch.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
So move it to a header file shared with userspace.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Add source files for xfs_log_rlimit.c The new file is used for log
size calculations and validation shared with userspace.
[dchinner: xfs_log_calc_max_attrsetm_res() does not modify the
tr_attrsetm reservation, just calculates the maximum. ]
[dchinner: rework loop in xfs_log_get_max_trans_res() ]
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Refactor xlog_ticket_alloc() to extract a new helper, i.e.
xfs_log_calc_unit_res().
This helper would be used to calculate the total log reservation
size by adding extra log operation/transation headers for a new
log ticket.
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
There's a bunch of definitions in xfs_trans.h that define on-disk
formats - transaction headers that get written into the log, log
item type definitions, etc. Split out everything into a separate
file so that all which remains in xfs_trans.h are kernel only
definitions.
Also, remove the duplicate magic number definitions for
XFS_TRANS_MAGIC...
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
The on disk log format definitions for the icreate log item are
intertwined with the kernel-only in-memory log item definitions.
Separate the log format definitions out into their own header file
so they can easily be shared with userspace.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
The on disk format definitions of the on-disk dquot, log formats and
quota off log formats are all intertwined with other definitions for
quotas. Separate them out into their own header file so they can
easily be shared with userspace.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
The EFI/EFD item format definitions are shared with userspace. Split
the out of header files that contain kernel only defintions to make
it simple to shared them.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
The log item format definitions are shared with userspace. Split
them out of header files that contain kernel only defintions to make
it simple to shared them.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
The on-disk format definitions for the log are spread randoms
through a couple of header files. Consolidate it all in a single
file that can be shared easily with userspace. This means that
xfs_log.h and xfs_log_priv.h no longer need to be shared with
userspace.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
