Since sb->s_blocksize is now initialized at the very beginning, the
local variable 'blocksize' in __ext4_fill_super() is not needed now.
Remove it and use sb->s_blocksize instead.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220916141527.1012715-16-yanaijie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Now we load the super block from the disk in two steps. First we load
the super block with the default block size(EXT4_MIN_BLOCK_SIZE). Second
we load the super block with the real block size. The second step is a
little far from the first step. This patch move these two steps together
in a new function.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220916141527.1012715-15-yanaijie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Factor out ext4_journal_data_mode_check(). No functional change.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Jan Kara<jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220916141527.1012715-14-yanaijie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This patch group the journal load and initialize code together and
factor out ext4_load_and_init_journal(). This patch also removes the
lable 'no_journal' which is not needed after refactor.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220916141527.1012715-13-yanaijie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Factor out ext4_group_desc_init() and ext4_group_desc_free(). No
functional change.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220916141527.1012715-12-yanaijie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Factor out ext4_geometry_check(). No functional change.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220916141527.1012715-11-yanaijie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Factor out ext4_check_feature_compatibility(). No functional change.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220916141527.1012715-10-yanaijie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Factor out ext4_init_metadata_csum(). No functional change.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220916141527.1012715-9-yanaijie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Factor out ext4_inode_info_init(). No functional change.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220916141527.1012715-7-yanaijie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Factor out ext4_fast_commit_init(). No functional change.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220916141527.1012715-6-yanaijie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Factor out ext4_handle_clustersize(). No functional change.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220916141527.1012715-5-yanaijie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Factor out ext4_set_def_opts(). No functional change.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220916141527.1012715-4-yanaijie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The 'cantfind_ext4' error handler is just a error msg print and then
goto failed_mount. This two level goto makes the code complex and not
easy to read. The only benefit is that is saves a little bit code.
However some branches can merge and some branches dot not even need it.
So do some refactor and remove it.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220916141527.1012715-3-yanaijie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Before these two branches neither loaded the journal nor created the
xattr cache. So the right label to goto is 'failed_mount3a'. Although
this did not cause any issues because the error handler validated if the
pointer is null. However this still made me confused when reading
the code. So it's still worth to modify to goto the right label.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220916141527.1012715-2-yanaijie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If fastcommit is already disabled, there isn't need to mark inode ineligible.
So move 'ext4_fc_disabled()' judgement bofore 'ext4_should_journal_data(inode)'
judgement which can avoid to do meaningless judgement.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220916083836.388347-3-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In 'ext4_fc_write_inode' function first call 'ext4_get_inode_loc' get 'iloc',
after use it miss release 'iloc.bh'.
So just release 'iloc.bh' before 'ext4_fc_write_inode' return.
Cc: stable@kernel.org
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220914100859.1415196-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Following process may lead to fs corruption:
1. ext4_create(dir/foo)
ext4_add_nondir
ext4_add_entry
ext4_dx_add_entry
a. add_dirent_to_buf
ext4_mark_inode_dirty
ext4_handle_dirty_metadata // dir inode bh is recorded into journal
b. ext4_append // dx_get_count(entries) == dx_get_limit(entries)
ext4_bread(EXT4_GET_BLOCKS_CREATE)
ext4_getblk
ext4_map_blocks
ext4_ext_map_blocks
ext4_mb_new_blocks
dquot_alloc_block
dquot_alloc_space_nodirty
inode_add_bytes // update dir's i_blocks
ext4_ext_insert_extent
ext4_ext_dirty // record extent bh into journal
ext4_handle_dirty_metadata(bh)
// record new block into journal
inode->i_size += inode->i_sb->s_blocksize // new size(in mem)
c. ext4_handle_dirty_dx_node(bh2)
// record dir's new block(dx_node) into journal
d. ext4_handle_dirty_dx_node((frame - 1)->bh)
e. ext4_handle_dirty_dx_node(frame->bh)
f. do_split // ret err!
g. add_dirent_to_buf
ext4_mark_inode_dirty(dir) // update raw_inode on disk(skipped)
2. fsck -a /dev/sdb
drop last block(dx_node) which beyonds dir's i_size.
/dev/sdb: recovering journal
/dev/sdb contains a file system with errors, check forced.
/dev/sdb: Inode 12, end of extent exceeds allowed value
(logical block 128, physical block 3938, len 1)
3. fsck -fn /dev/sdb
dx_node->entry[i].blk > dir->i_size
Pass 2: Checking directory structure
Problem in HTREE directory inode 12 (/dir): bad block number 128.
Clear HTree index? no
Problem in HTREE directory inode 12: block #3 has invalid depth (2)
Problem in HTREE directory inode 12: block #3 has bad max hash
Problem in HTREE directory inode 12: block #3 not referenced
Fix it by marking inode dirty directly inside ext4_append().
Fetch a reproducer in [Link].
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216466
Cc: stable@vger.kernel.org
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220911045204.516460-1-chengzhihao1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4_inline_data_fiemap() has been removed since
commit d3b6f23f71 ("ext4: move ext4_fiemap to use iomap framework"),
so remove it.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220909065307.1155201-1-cuigaosheng1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4 currently updates the i_version counter when the atime is updated
during a read. This is less than ideal as it can cause unnecessary cache
invalidations with NFSv4 and unnecessary remeasurements for IMA.
The increment in ext4_mark_iloc_dirty is also problematic since it can
corrupt the i_version counter for ea_inodes. We aren't bumping the file
times in ext4_mark_iloc_dirty, so changing the i_version there seems
wrong, and is the cause of both problems.
Remove that callsite and add increments to the setattr, setxattr and
ioctl codepaths, at the same times that we update the ctime. The
i_version bump that already happens during timestamp updates should take
care of the rest.
In ext4_move_extents, increment the i_version on both inodes, and also
add in missing ctime updates.
[ Some minor updates since we've already enabled the i_version counter
unconditionally already via another patch series. -- TYT ]
Cc: stable@kernel.org
Cc: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20220908172448.208585-3-jlayton@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In our product environment, we encounter some jbd hung waiting handles to
stop while several writters were doing memory reclaim for buffer head
allocation in delay alloc write path. Ext4 do buffer head allocation with
holding transaction handle which may be blocked too long if the reclaim
works not so smooth. According to our bcc trace, the reclaim time in
buffer head allocation can reach 258s and the jbd transaction commit also
take almost the same time meanwhile. Except for these extreme cases,
we often see several seconds delays for cgroup memory reclaim on our
servers. This is more likely to happen considering docker environment.
One thing to note, the allocation of buffer heads is as often as page
allocation or more often when blocksize less than page size. Just like
page cache allocation, we should also place the buffer head allocation
before startting the handle.
Cc: stable@kernel.org
Signed-off-by: Jinke Han <hanjinke.666@bytedance.com>
Link: https://lore.kernel.org/r/20220903012429.22555-1-hanjinke.666@bytedance.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Recently we notice that ext4 filesystem would occasionally fail to read
metadata from disk and report error message, but the disk and block
layer looks fine. After analyse, we lockon commit 88dbcbb3a4
("blkdev: avoid migration stalls for blkdev pages"). It provide a
migration method for the bdev, we could move page that has buffers
without extra users now, but it lock the buffers on the page, which
breaks the fragile metadata read operation on ext4 filesystem,
ext4_read_bh_lock() was copied from ll_rw_block(), it depends on the
assumption of that locked buffer means it is under IO. So it just
trylock the buffer and skip submit IO if it lock failed, after
wait_on_buffer() we conclude IO error because the buffer is not
uptodate.
This issue could be easily reproduced by add some delay just after
buffer_migrate_lock_buffers() in __buffer_migrate_folio() and do
fsstress on ext4 filesystem.
EXT4-fs error (device pmem1): __ext4_find_entry:1658: inode #73193:
comm fsstress: reading directory lblock 0
EXT4-fs error (device pmem1): __ext4_find_entry:1658: inode #75334:
comm fsstress: reading directory lblock 0
Fix it by removing the trylock logic in ext4_read_bh_lock(), just lock
the buffer and submit IO if it's not uptodate, and also leave over
readahead helper.
Cc: stable@kernel.org
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220831074629.3755110-1-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The original i_version implementation was pretty expensive, requiring a
log flush on every change. Because of this, it was gated behind a mount
option (implemented via the MS_I_VERSION mountoption flag).
Commit ae5e165d85 (fs: new API for handling inode->i_version) made the
i_version flag much less expensive, so there is no longer a performance
penalty from enabling it. xfs and btrfs already enable it
unconditionally when the on-disk format can support it.
Have ext4 ignore the SB_I_VERSION flag, and just enable it
unconditionally. While we're in here, mark the i_version mount
option Opt_removed.
[ Removed leftover bits of i_version from ext4_apply_options() since it
now can't ever be set in ctx->mask_s_flags -- lczerner ]
Cc: stable@kernel.org
Cc: Dave Chinner <david@fromorbit.com>
Cc: Benjamin Coddington <bcodding@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220824160349.39664-3-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ea_inodes are using i_version for storing part of the reference count so
we really need to leave it alone.
The problem can be reproduced by xfstest ext4/026 when iversion is
enabled. Fix it by not calling inode_inc_iversion() for EXT4_EA_INODE_FL
inodes in ext4_mark_iloc_dirty().
Cc: stable@kernel.org
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Link: https://lore.kernel.org/r/20220824160349.39664-1-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The check in __ext4_read_dirblock() for block being outside of directory
size was wrong because it compared block number against directory size
in bytes. Fix it.
Fixes: 65f8ea4cd5 ("ext4: check if directory block is within i_size")
CVE: CVE-2022-1184
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Link: https://lore.kernel.org/r/20220822114832.1482-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4_lazyinit_thread is not set freezable. Hence when the thread calls
try_to_freeze it doesn't freeze during suspend and continues to send
requests to the storage during suspend, resulting in suspend failures.
Cc: stable@kernel.org
Signed-off-by: Lalith Rajendran <lalithkraj@google.com>
Link: https://lore.kernel.org/r/20220818214049.1519544-1-lalithkraj@google.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
On a read-only filesystem, we won't invoke the block allocator, so we
don't need to prefetch the block bitmaps.
This avoids starting and running the ext4lazyinit thread at all on a
system with no read-write ext4 filesystems (for instance, a container VM
with read-only filesystems underneath an overlayfs).
Fixes: 21175ca434 ("ext4: make prefetch_block_bitmaps default")
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Link: https://lore.kernel.org/r/48b41da1498fcac3287e2e06b660680646c1c050.1659323972.git.josh@joshtriplett.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When inode is created and written to using direct IO, there is nothing
to clear the EXT4_STATE_MAY_INLINE_DATA flag. Thus when inode gets
truncated later to say 1 byte and written using normal write, we will
try to store the data as inline data. This confuses the code later
because the inode now has both normal block and inline data allocated
and the confusion manifests for example as:
kernel BUG at fs/ext4/inode.c:2721!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 359 Comm: repro Not tainted 5.19.0-rc8-00001-g31ba1e3b8305-dirty #15
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-1.fc36 04/01/2014
RIP: 0010:ext4_writepages+0x363d/0x3660
RSP: 0018:ffffc90000ccf260 EFLAGS: 00010293
RAX: ffffffff81e1abcd RBX: 0000008000000000 RCX: ffff88810842a180
RDX: 0000000000000000 RSI: 0000008000000000 RDI: 0000000000000000
RBP: ffffc90000ccf650 R08: ffffffff81e17d58 R09: ffffed10222c680b
R10: dfffe910222c680c R11: 1ffff110222c680a R12: ffff888111634128
R13: ffffc90000ccf880 R14: 0000008410000000 R15: 0000000000000001
FS: 00007f72635d2640(0000) GS:ffff88811b000000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000565243379180 CR3: 000000010aa74000 CR4: 0000000000150eb0
Call Trace:
<TASK>
do_writepages+0x397/0x640
filemap_fdatawrite_wbc+0x151/0x1b0
file_write_and_wait_range+0x1c9/0x2b0
ext4_sync_file+0x19e/0xa00
vfs_fsync_range+0x17b/0x190
ext4_buffered_write_iter+0x488/0x530
ext4_file_write_iter+0x449/0x1b90
vfs_write+0xbcd/0xf40
ksys_write+0x198/0x2c0
__x64_sys_write+0x7b/0x90
do_syscall_64+0x3d/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
</TASK>
Fix the problem by clearing EXT4_STATE_MAY_INLINE_DATA when we are doing
direct IO write to a file.
Cc: stable@kernel.org
Reported-by: Tadeusz Struk <tadeusz.struk@linaro.org>
Reported-by: syzbot+bd13648a53ed6933ca49@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=a1e89d09bbbcbd5c4cb45db230ee28c822953984
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Tested-by: Tadeusz Struk<tadeusz.struk@linaro.org>
Link: https://lore.kernel.org/r/20220727155753.13969-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Modify the error returns for two file types that can't be defragged to
more clearly communicate those restrictions to a caller. When the
defrag code is applied to swap files, return -ETXTBSY, and when applied
to quota files, return -EOPNOTSUPP. Move an extent tree search whose
results are only occasionally required to the site always requiring them
for improved efficiency. Address a few typos.
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Link: https://lore.kernel.org/r/20220722163910.268564-1-enwlinux@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When expanding a file system from (16TiB-2MiB) to 18TiB, the operation
exits early which leads to result inconsistency between resize2fs and
Ext4 kernel driver.
=== before ===
○ → resize2fs /dev/mapper/thin
resize2fs 1.45.5 (07-Jan-2020)
Filesystem at /dev/mapper/thin is mounted on /mnt/test; on-line resizing required
old_desc_blocks = 2048, new_desc_blocks = 2304
The filesystem on /dev/mapper/thin is now 4831837696 (4k) blocks long.
[ 865.186308] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[ 912.091502] dm-4: detected capacity change from 34359738368 to 38654705664
[ 970.030550] dm-5: detected capacity change from 34359734272 to 38654701568
[ 1000.012751] EXT4-fs (dm-5): resizing filesystem from 4294966784 to 4831837696 blocks
[ 1000.012878] EXT4-fs (dm-5): resized filesystem to 4294967296
=== after ===
[ 129.104898] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[ 143.773630] dm-4: detected capacity change from 34359738368 to 38654705664
[ 198.203246] dm-5: detected capacity change from 34359734272 to 38654701568
[ 207.918603] EXT4-fs (dm-5): resizing filesystem from 4294966784 to 4831837696 blocks
[ 207.918754] EXT4-fs (dm-5): resizing filesystem from 4294967296 to 4831837696 blocks
[ 207.918758] EXT4-fs (dm-5): Converting file system to meta_bg
[ 207.918790] EXT4-fs (dm-5): resizing filesystem from 4294967296 to 4831837696 blocks
[ 221.454050] EXT4-fs (dm-5): resized to 4658298880 blocks
[ 227.634613] EXT4-fs (dm-5): resized filesystem to 4831837696
Signed-off-by: Jerry Lee <jerrylee@qnap.com>
Link: https://lore.kernel.org/r/PU1PR04MB22635E739BD21150DC182AC6A18C9@PU1PR04MB2263.apcprd04.prod.outlook.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Variable 'grp' may be left uninitialized if there's no group with
suitable average fragment size (or larger). Fix the problem by
initializing it earlier.
Link: https://lore.kernel.org/r/20220922091542.pkhedytey7wzp5fi@quack3
Fixes: 83e80a6e35 ("ext4: use buckets for cr 1 block scan instead of rbtree")
Cc: stable@kernel.org
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This is in preparation for adding tmpfile support to fuse, which requires
that the tmpfile creation and opening are done as a single operation.
Replace the 'struct dentry *' argument of i_op->tmpfile with
'struct file *'.
Call finish_open_simple() as the last thing in ->tmpfile() instances (may
be omitted in the error case).
Change d_tmpfile() argument to 'struct file *' as well to make callers more
readable.
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This patch avoids threads live-locking for hours when a large number
threads are competing over the last few free extents as they blocks
getting added and removed from preallocation pools. From our bug
reporter:
A reliable way for triggering this has multiple writers
continuously write() to files when the filesystem is full, while
small amounts of space are freed (e.g. by truncating a large file
-1MiB at a time). In the local filesystem, this can be done by
simply not checking the return code of write (0) and/or the error
(ENOSPACE) that is set. Over NFS with an async mount, even clients
with proper error checking will behave this way since the linux NFS
client implementation will not propagate the server errors [the
write syscalls immediately return success] until the file handle is
closed. This leads to a situation where NFS clients send a
continuous stream of WRITE rpcs which result in ERRNOSPACE -- but
since the client isn't seeing this, the stream of writes continues
at maximum network speed.
When some space does appear, multiple writers will all attempt to
claim it for their current write. For NFS, we may see dozens to
hundreds of threads that do this.
The real-world scenario of this is database backup tooling (in
particular, github.com/mdkent/percona-xtrabackup) which may write
large files (>1TiB) to NFS for safe keeping. Some temporary files
are written, rewound, and read back -- all before closing the file
handle (the temp file is actually unlinked, to trigger automatic
deletion on close/crash.) An application like this operating on an
async NFS mount will not see an error code until TiB have been
written/read.
The lockup was observed when running this database backup on large
filesystems (64 TiB in this case) with a high number of block
groups and no free space. Fragmentation is generally not a factor
in this filesystem (~thousands of large files, mostly contiguous
except for the parts written while the filesystem is at capacity.)
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Using rbtree for sorting groups by average fragment size is relatively
expensive (needs rbtree update on every block freeing or allocation) and
leads to wide spreading of allocations because selection of block group
is very sentitive both to changes in free space and amount of blocks
allocated. Furthermore selecting group with the best matching average
fragment size is not necessary anyway, even more so because the
variability of fragment sizes within a group is likely large so average
is not telling much. We just need a group with large enough average
fragment size so that we have high probability of finding large enough
free extent and we don't want average fragment size to be too big so
that we are likely to find free extent only somewhat larger than what we
need.
So instead of maintaing rbtree of groups sorted by fragment size keep
bins (lists) or groups where average fragment size is in the interval
[2^i, 2^(i+1)). This structure requires less updates on block allocation
/ freeing, generally avoids chaotic spreading of allocations into block
groups, and still is able to quickly (even faster that the rbtree)
provide a block group which is likely to have a suitably sized free
space extent.
This patch reduces number of block groups used when untarring archive
with medium sized files (size somewhat above 64k which is default
mballoc limit for avoiding locality group preallocation) to about half
and thus improves write speeds for eMMC flash significantly.
Fixes: 196e402adf ("ext4: improve cr 0 / cr 1 group scanning")
CC: stable@kernel.org
Reported-and-tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Tested-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/all/0d81a7c2-46b7-6010-62a4-3e6cfc1628d6@i2se.com/
Link: https://lore.kernel.org/r/20220908092136.11770-5-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Curently we don't use any preallocation when a file is already closed
when allocating blocks (from writeback code when converting delayed
allocation). However for small files, using locality group preallocation
is actually desirable as that is not specific to a particular file.
Rather it is a method to pack small files together to reduce
fragmentation and for that the fact the file is closed is actually even
stronger hint the file would benefit from packing. So change the logic
to allow locality group preallocation in this case.
Fixes: 196e402adf ("ext4: improve cr 0 / cr 1 group scanning")
CC: stable@kernel.org
Reported-and-tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Tested-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/all/0d81a7c2-46b7-6010-62a4-3e6cfc1628d6@i2se.com/
Link: https://lore.kernel.org/r/20220908092136.11770-4-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently the Orlov inode allocator searches for free inodes for a
directory only in flex block groups with at most inodes_per_group/16
more directory inodes than average per flex block group. However with
growing size of flex block group this becomes unnecessarily strict.
Scale allowed difference from average directory count per flex block
group with flex block group size as we do with other metrics.
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Tested-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Cc: stable@kernel.org
Link: https://lore.kernel.org/all/0d81a7c2-46b7-6010-62a4-3e6cfc1628d6@i2se.com/
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220908092136.11770-3-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
mb_set_largest_free_order() updates lists containing groups with largest
chunk of free space of given order. The way it updates it leads to
always moving the group to the tail of the list. Thus allocations
looking for free space of given order effectively end up cycling through
all groups (and due to initialization in last to first order). This
spreads allocations among block groups which reduces performance for
rotating disks or low-end flash media. Change
mb_set_largest_free_order() to only update lists if the order of the
largest free chunk in the group changed.
Fixes: 196e402adf ("ext4: improve cr 0 / cr 1 group scanning")
CC: stable@kernel.org
Reported-and-tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Tested-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/all/0d81a7c2-46b7-6010-62a4-3e6cfc1628d6@i2se.com/
Link: https://lore.kernel.org/r/20220908092136.11770-2-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
One of the side-effects of mb_optimize_scan was that the optimized
functions to select next group to try were called even before we tried
the goal group. As a result we no longer allocate files close to
corresponding inodes as well as we don't try to expand currently
allocated extent in the same group. This results in reaim regression
with workfile.disk workload of upto 8% with many clients on my test
machine:
baseline mb_optimize_scan
Hmean disk-1 2114.16 ( 0.00%) 2099.37 ( -0.70%)
Hmean disk-41 87794.43 ( 0.00%) 83787.47 * -4.56%*
Hmean disk-81 148170.73 ( 0.00%) 135527.05 * -8.53%*
Hmean disk-121 177506.11 ( 0.00%) 166284.93 * -6.32%*
Hmean disk-161 220951.51 ( 0.00%) 207563.39 * -6.06%*
Hmean disk-201 208722.74 ( 0.00%) 203235.59 ( -2.63%)
Hmean disk-241 222051.60 ( 0.00%) 217705.51 ( -1.96%)
Hmean disk-281 252244.17 ( 0.00%) 241132.72 * -4.41%*
Hmean disk-321 255844.84 ( 0.00%) 245412.84 * -4.08%*
Also this is causing huge regression (time increased by a factor of 5 or
so) when untarring archive with lots of small files on some eMMC storage
cards.
Fix the problem by making sure we try goal group first.
Fixes: 196e402adf ("ext4: improve cr 0 / cr 1 group scanning")
CC: stable@kernel.org
Reported-and-tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Tested-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/all/20220727105123.ckwrhbilzrxqpt24@quack3/
Link: https://lore.kernel.org/all/0d81a7c2-46b7-6010-62a4-3e6cfc1628d6@i2se.com/
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220908092136.11770-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Add support for STATX_DIOALIGN to ext4, so that direct I/O alignment
restrictions are exposed to userspace in a generic way.
Acked-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20220827065851.135710-5-ebiggers@kernel.org
To prepare for STATX_DIOALIGN support, make two changes to
fscrypt_dio_supported().
First, remove the filesystem-block-alignment check and make the
filesystems handle it instead. It previously made sense to have it in
fs/crypto/; however, to support STATX_DIOALIGN the alignment restriction
would have to be returned to filesystems. It ends up being simpler if
filesystems handle this part themselves, especially for f2fs which only
allows fs-block-aligned DIO in the first place.
Second, make fscrypt_dio_supported() work on inodes whose encryption key
hasn't been set up yet, by making it set up the key if needed. This is
required for statx(), since statx() doesn't require a file descriptor.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20220827065851.135710-4-ebiggers@kernel.org
As a step towards freeing the PG_error flag for other uses, change ext4
and f2fs to stop using PG_error to track decryption errors. Instead, if
a decryption error occurs, just mark the whole bio as failed. The
coarser granularity isn't really a problem since it isn't any worse than
what the block layer provides, and errors from a multi-page readahead
aren't reported to applications unless a single-page read fails too.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <chao@kernel.org> # for f2fs part
Link: https://lore.kernel.org/r/20220815235052.86545-2-ebiggers@kernel.org
Lin, Yang Shi, Anshuman Khandual and Mike Rapoport
- Some kmemleak fixes from Patrick Wang and Waiman Long
- DAMON updates from SeongJae Park
- memcg debug/visibility work from Roman Gushchin
- vmalloc speedup from Uladzislau Rezki
- more folio conversion work from Matthew Wilcox
- enhancements for coherent device memory mapping from Alex Sierra
- addition of shared pages tracking and CoW support for fsdax, from
Shiyang Ruan
- hugetlb optimizations from Mike Kravetz
- Mel Gorman has contributed some pagealloc changes to improve latency
and realtime behaviour.
- mprotect soft-dirty checking has been improved by Peter Xu
- Many other singleton patches all over the place
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCYuravgAKCRDdBJ7gKXxA
jpqSAQDrXSdII+ht9kSHlaCVYjqRFQz/rRvURQrWQV74f6aeiAD+NHHeDPwZn11/
SPktqEUrF1pxnGQxqLh1kUFUhsVZQgE=
=w/UH
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2022-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Most of the MM queue. A few things are still pending.
Liam's maple tree rework didn't make it. This has resulted in a few
other minor patch series being held over for next time.
Multi-gen LRU still isn't merged as we were waiting for mapletree to
stabilize. The current plan is to merge MGLRU into -mm soon and to
later reintroduce mapletree, with a view to hopefully getting both
into 6.1-rc1.
Summary:
- The usual batches of cleanups from Baoquan He, Muchun Song, Miaohe
Lin, Yang Shi, Anshuman Khandual and Mike Rapoport
- Some kmemleak fixes from Patrick Wang and Waiman Long
- DAMON updates from SeongJae Park
- memcg debug/visibility work from Roman Gushchin
- vmalloc speedup from Uladzislau Rezki
- more folio conversion work from Matthew Wilcox
- enhancements for coherent device memory mapping from Alex Sierra
- addition of shared pages tracking and CoW support for fsdax, from
Shiyang Ruan
- hugetlb optimizations from Mike Kravetz
- Mel Gorman has contributed some pagealloc changes to improve
latency and realtime behaviour.
- mprotect soft-dirty checking has been improved by Peter Xu
- Many other singleton patches all over the place"
[ XFS merge from hell as per Darrick Wong in
https://lore.kernel.org/all/YshKnxb4VwXycPO8@magnolia/ ]
* tag 'mm-stable-2022-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (282 commits)
tools/testing/selftests/vm/hmm-tests.c: fix build
mm: Kconfig: fix typo
mm: memory-failure: convert to pr_fmt()
mm: use is_zone_movable_page() helper
hugetlbfs: fix inaccurate comment in hugetlbfs_statfs()
hugetlbfs: cleanup some comments in inode.c
hugetlbfs: remove unneeded header file
hugetlbfs: remove unneeded hugetlbfs_ops forward declaration
hugetlbfs: use helper macro SZ_1{K,M}
mm: cleanup is_highmem()
mm/hmm: add a test for cross device private faults
selftests: add soft-dirty into run_vmtests.sh
selftests: soft-dirty: add test for mprotect
mm/mprotect: fix soft-dirty check in can_change_pte_writable()
mm: memcontrol: fix potential oom_lock recursion deadlock
mm/gup.c: fix formatting in check_and_migrate_movable_page()
xfs: fail dax mount if reflink is enabled on a partition
mm/memcontrol.c: remove the redundant updating of stats_flush_threshold
userfaultfd: don't fail on unrecognized features
hugetlb_cgroup: fix wrong hugetlb cgroup numa stat
...
superblock and improved the performance of the online resizing of file
systems with bigalloc enabled. Fixed a lot of bugs, in particular for
the inline data feature, potential races when creating and deleting
inodes with shared extended attribute blocks, and the handling
directory blocks which are corrupted.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmLrRpEACgkQ8vlZVpUN
gaN2OAf/a2lxhZ6DvkTfWjni0BG6i2ajd11lT93N+we0wWk9f0VdNR2JUdTum0HL
UtwP48km+FuqkbDrODlbSky5V+IZhd90ihLyPbPKSU/52c7d6IxNOCz2Fxq981j2
Ik6QgdegvCaUDHmluJfYYcS5Pa97HXtSb6VVi1RAvHHFbYDSChObs76ZQWBmhsSh
Mo84mFGS7BDIVNVkg4PBMx4b3iFvKfE1AUdfA5dhB4GXHgDA+77GByw+RjdQ6Dh/
W0l5AVAXbK7BYSVX6Cg41WUMYOBu58Hrh/CHL1DWv3khvjgxLqM7ERAFOISVI3Ax
vCXPXfjpbTFElUQuOw4m33vixaFU+A==
=xTsM
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"Add new ioctls to set and get the file system UUID in the ext4
superblock and improved the performance of the online resizing of file
systems with bigalloc enabled.
Fixed a lot of bugs, in particular for the inline data feature,
potential races when creating and deleting inodes with shared extended
attribute blocks, and the handling of directory blocks which are
corrupted"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (37 commits)
ext4: add ioctls to get/set the ext4 superblock uuid
ext4: avoid resizing to a partial cluster size
ext4: reduce computation of overhead during resize
jbd2: fix assertion 'jh->b_frozen_data == NULL' failure when journal aborted
ext4: block range must be validated before use in ext4_mb_clear_bb()
mbcache: automatically delete entries from cache on freeing
mbcache: Remove mb_cache_entry_delete()
ext2: avoid deleting xattr block that is being reused
ext2: unindent codeblock in ext2_xattr_set()
ext2: factor our freeing of xattr block reference
ext4: fix race when reusing xattr blocks
ext4: unindent codeblock in ext4_xattr_block_set()
ext4: remove EA inode entry from mbcache on inode eviction
mbcache: add functions to delete entry if unused
mbcache: don't reclaim used entries
ext4: make sure ext4_append() always allocates new block
ext4: check if directory block is within i_size
ext4: reflect mb_optimize_scan value in options file
ext4: avoid remove directory when directory is corrupted
ext4: aligned '*' in comments
...
- Fix an accounting bug that made NR_FILE_DIRTY grow without limit
when running xfstests
- Convert more of mpage to use folios
- Remove add_to_page_cache() and add_to_page_cache_locked()
- Convert find_get_pages_range() to filemap_get_folios()
- Improvements to the read_cache_page() family of functions
- Remove a few unnecessary checks of PageError
- Some straightforward filesystem conversions to use folios
- Split PageMovable users out from address_space_operations into their
own movable_operations
- Convert aops->migratepage to aops->migrate_folio
- Remove nobh support (Christoph Hellwig)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEejHryeLBw/spnjHrDpNsjXcpgj4FAmLpViQACgkQDpNsjXcp
gj5pBgf/f3+K7Hi3qw7aYQCYJQ7IA/bLyE/DLWI59kuiao6wDSve40B9YH9X++Ha
mRLp55bkQS+bwS2xa4jlqrIDJzAfNoWlXaXZHUXGL1C/52ChTF6jaH2cvO9PVlDS
7fLv1hy2LwiIdzpKJkUW7T+kcQGj3QLKqtQ4x8zD0LGMg055yvt/qndHSUi41nWT
/58+6W8Sk4vvRgkpeChFzF1lGLy00+FGT8y5V2kM9uRliFQ7XPCwqB2a3e5jbW6z
C1NXQmRnopCrnOT1TFIhK3DyX6MDIWV5qcikNAmCKFb9fQFPmjDLPt9iSoMGjw2M
Z+UVhJCaU3ISccd0DG5Ra/vzs9/O9Q==
=DgUi
-----END PGP SIGNATURE-----
Merge tag 'folio-6.0' of git://git.infradead.org/users/willy/pagecache
Pull folio updates from Matthew Wilcox:
- Fix an accounting bug that made NR_FILE_DIRTY grow without limit
when running xfstests
- Convert more of mpage to use folios
- Remove add_to_page_cache() and add_to_page_cache_locked()
- Convert find_get_pages_range() to filemap_get_folios()
- Improvements to the read_cache_page() family of functions
- Remove a few unnecessary checks of PageError
- Some straightforward filesystem conversions to use folios
- Split PageMovable users out from address_space_operations into
their own movable_operations
- Convert aops->migratepage to aops->migrate_folio
- Remove nobh support (Christoph Hellwig)
* tag 'folio-6.0' of git://git.infradead.org/users/willy/pagecache: (78 commits)
fs: remove the NULL get_block case in mpage_writepages
fs: don't call ->writepage from __mpage_writepage
fs: remove the nobh helpers
jfs: stop using the nobh helper
ext2: remove nobh support
ntfs3: refactor ntfs_writepages
mm/folio-compat: Remove migration compatibility functions
fs: Remove aops->migratepage()
secretmem: Convert to migrate_folio
hugetlb: Convert to migrate_folio
aio: Convert to migrate_folio
f2fs: Convert to filemap_migrate_folio()
ubifs: Convert to filemap_migrate_folio()
btrfs: Convert btrfs_migratepage to migrate_folio
mm/migrate: Add filemap_migrate_folio()
mm/migrate: Convert migrate_page() to migrate_folio()
nfs: Convert to migrate_folio
btrfs: Convert btree_migratepage to migrate_folio
mm/migrate: Convert expected_page_refs() to folio_expected_refs()
mm/migrate: Convert buffer_migrate_page() to buffer_migrate_folio()
...
This fixes a race between changing the ext4 superblock uuid and operations
like mounting, resizing, changing features, etc.
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jeremy Bongio <bongiojp@gmail.com>
Link: https://lore.kernel.org/r/20220721224422.438351-1-bongiojp@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This patch avoids an attempt to resize the filesystem to an
unaligned cluster boundary. An online resize to a size that is not
integral to cluster size results in the last iteration attempting to
grow the fs by a negative amount, which trips a BUG_ON and leaves the fs
with a corrupted in-memory superblock.
Signed-off-by: Oleg Kiselev <okiselev@amazon.com>
Link: https://lore.kernel.org/r/0E92A0AB-4F16-4F1A-94B7-702CC6504FDE@amazon.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This patch avoids doing an O(n**2)-complexity walk through every flex group.
Instead, it uses the already computed overhead information for the newly
allocated space, and simply adds it to the previously calculated
overhead stored in the superblock. This drastically reduces the time
taken to resize very large bigalloc filesystems (from 3+ hours for a
64TB fs down to milliseconds).
Signed-off-by: Oleg Kiselev <okiselev@amazon.com>
Link: https://lore.kernel.org/r/CE4F359F-4779-45E6-B6A9-8D67FDFF5AE2@amazon.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Block range to free is validated in ext4_free_blocks() using
ext4_inode_block_valid() and then it's passed to ext4_mb_clear_bb().
However in some situations on bigalloc file system the range might be
adjusted after the validation in ext4_free_blocks() which can lead to
troubles on corrupted file systems such as one found by syzkaller that
resulted in the following BUG
kernel BUG at fs/ext4/ext4.h:3319!
PREEMPT SMP NOPTI
CPU: 28 PID: 4243 Comm: repro Kdump: loaded Not tainted 5.19.0-rc6+ #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1.fc35 04/01/2014
RIP: 0010:ext4_free_blocks+0x95e/0xa90
Call Trace:
<TASK>
? lock_timer_base+0x61/0x80
? __es_remove_extent+0x5a/0x760
? __mod_timer+0x256/0x380
? ext4_ind_truncate_ensure_credits+0x90/0x220
ext4_clear_blocks+0x107/0x1b0
ext4_free_data+0x15b/0x170
ext4_ind_truncate+0x214/0x2c0
? _raw_spin_unlock+0x15/0x30
? ext4_discard_preallocations+0x15a/0x410
? ext4_journal_check_start+0xe/0x90
? __ext4_journal_start_sb+0x2f/0x110
ext4_truncate+0x1b5/0x460
? __ext4_journal_start_sb+0x2f/0x110
ext4_evict_inode+0x2b4/0x6f0
evict+0xd0/0x1d0
ext4_enable_quotas+0x11f/0x1f0
ext4_orphan_cleanup+0x3de/0x430
? proc_create_seq_private+0x43/0x50
ext4_fill_super+0x295f/0x3ae0
? snprintf+0x39/0x40
? sget_fc+0x19c/0x330
? ext4_reconfigure+0x850/0x850
get_tree_bdev+0x16d/0x260
vfs_get_tree+0x25/0xb0
path_mount+0x431/0xa70
__x64_sys_mount+0xe2/0x120
do_syscall_64+0x5b/0x80
? do_user_addr_fault+0x1e2/0x670
? exc_page_fault+0x70/0x170
entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033:0x7fdf4e512ace
Fix it by making sure that the block range is properly validated before
used every time it changes in ext4_free_blocks() or ext4_mb_clear_bb().
Link: https://syzkaller.appspot.com/bug?id=5266d464285a03cee9dbfda7d2452a72c3c2ae7c
Reported-by: syzbot+15cd994e273307bf5cfa@syzkaller.appspotmail.com
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Cc: Tadeusz Struk <tadeusz.struk@linaro.org>
Tested-by: Tadeusz Struk <tadeusz.struk@linaro.org>
Link: https://lore.kernel.org/r/20220714165903.58260-1-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When ext4_xattr_block_set() decides to remove xattr block the following
race can happen:
CPU1 CPU2
ext4_xattr_block_set() ext4_xattr_release_block()
new_bh = ext4_xattr_block_cache_find()
lock_buffer(bh);
ref = le32_to_cpu(BHDR(bh)->h_refcount);
if (ref == 1) {
...
mb_cache_entry_delete();
unlock_buffer(bh);
ext4_free_blocks();
...
ext4_forget(..., bh, ...);
jbd2_journal_revoke(..., bh);
ext4_journal_get_write_access(..., new_bh, ...)
do_get_write_access()
jbd2_journal_cancel_revoke(..., new_bh);
Later the code in ext4_xattr_block_set() finds out the block got freed
and cancels reusal of the block but the revoke stays canceled and so in
case of block reuse and journal replay the filesystem can get corrupted.
If the race works out slightly differently, we can also hit assertions
in the jbd2 code.
Fix the problem by making sure that once matching mbcache entry is
found, code dropping the last xattr block reference (or trying to modify
xattr block in place) waits until the mbcache entry reference is
dropped. This way code trying to reuse xattr block is protected from
someone trying to drop the last reference to xattr block.
Reported-and-tested-by: Ritesh Harjani <ritesh.list@gmail.com>
CC: stable@vger.kernel.org
Fixes: 82939d7999 ("ext4: convert to mbcache2")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220712105436.32204-5-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Remove unnecessary else (and thus indentation level) from a code block
in ext4_xattr_block_set(). It will also make following code changes
easier. No functional changes.
CC: stable@vger.kernel.org
Fixes: 82939d7999 ("ext4: convert to mbcache2")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220712105436.32204-4-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently we remove EA inode from mbcache as soon as its xattr refcount
drops to zero. However there can be pending attempts to reuse the inode
and thus refcount handling code has to handle the situation when
refcount increases from zero anyway. So save some work and just keep EA
inode in mbcache until it is getting evicted. At that moment we are sure
following iget() of EA inode will fail anyway (or wait for eviction to
finish and load things from the disk again) and so removing mbcache
entry at that moment is fine and simplifies the code a bit.
CC: stable@vger.kernel.org
Fixes: 82939d7999 ("ext4: convert to mbcache2")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220712105436.32204-3-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4_append() must always allocate a new block, otherwise we run the
risk of overwriting existing directory block corrupting the directory
tree in the process resulting in all manner of problems later on.
Add a sanity check to see if the logical block is already allocated and
error out if it is.
Cc: stable@kernel.org
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20220704142721.157985-2-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently ext4 directory handling code implicitly assumes that the
directory blocks are always within the i_size. In fact ext4_append()
will attempt to allocate next directory block based solely on i_size and
the i_size is then appropriately increased after a successful
allocation.
However, for this to work it requires i_size to be correct. If, for any
reason, the directory inode i_size is corrupted in a way that the
directory tree refers to a valid directory block past i_size, we could
end up corrupting parts of the directory tree structure by overwriting
already used directory blocks when modifying the directory.
Fix it by catching the corruption early in __ext4_read_dirblock().
Addresses Red-Hat-Bugzilla: #2070205
CVE: CVE-2022-1184
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20220704142721.157985-1-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Add support to display the mb_optimize_scan value in
/proc/fs/ext4/<dev>/options file. The option is only
displayed when the value is non default.
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/20220704054603.21462-1-ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Now if check directoy entry is corrupted, ext4_empty_dir may return true
then directory will be removed when file system mounted with "errors=continue".
In order not to make things worse just return false when directory is corrupted.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220622090223.682234-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When migrating to extents, the checksum seed of temporary inode
need to be replaced by inode's, otherwise the inode checksums
will be incorrect when swapping the inodes data.
However, the temporary inode can not match it's checksum to
itself since it has lost it's own checksum seed.
mkfs.ext4 -F /dev/sdc
mount /dev/sdc /mnt/sdc
xfs_io -fc "pwrite 4k 4k" -c "fsync" /mnt/sdc/testfile
chattr -e /mnt/sdc/testfile
chattr +e /mnt/sdc/testfile
umount /dev/sdc
fsck -fn /dev/sdc
========
...
Pass 1: Checking inodes, blocks, and sizes
Inode 13 passes checks, but checksum does not match inode. Fix? no
...
========
The fix is simple, save the checksum seed of temporary inode, and
recover it after migrating to extents.
Fixes: e81c9302a6 ("ext4: set csum seed in tmp inode while migrating to extents")
Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220617062515.2113438-1-lilingfeng3@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Use the EXT4_INODE_HAS_XATTR_SPACE macro to more accurately
determine whether the inode have xattr space.
Cc: stable@kernel.org
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220616021358.2504451-5-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If the ext4 inode does not have xattr space, 0 is returned in the
get_max_inline_xattr_value_size function. Otherwise, the function returns
a negative value when the inode does not contain EXT4_STATE_XATTR.
Cc: stable@kernel.org
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220616021358.2504451-4-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When adding an xattr to an inode, we must ensure that the inode_size is
not less than EXT4_GOOD_OLD_INODE_SIZE + extra_isize + pad. Otherwise,
the end position may be greater than the start position, resulting in UAF.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220616021358.2504451-2-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
A race can occur in the unlikely event ext4 is unable to allocate a
physical cluster for a delayed allocation in a bigalloc file system
during writeback. Failure to allocate a cluster forces error recovery
that includes a call to mpage_release_unused_pages(). That function
removes any corresponding delayed allocated blocks from the extent
status tree. If a new delayed write is in progress on the same cluster
simultaneously, resulting in the addition of an new extent containing
one or more blocks in that cluster to the extent status tree, delayed
block accounting can be thrown off if that delayed write then encounters
a similar cluster allocation failure during future writeback.
Write lock the i_data_sem in mpage_release_unused_pages() to fix this
problem. Ext4's block/cluster accounting code for bigalloc relies on
i_data_sem for mutual exclusion, as is found in the delayed write path,
and the locking in mpage_release_unused_pages() is missing.
Cc: stable@kernel.org
Reported-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Link: https://lore.kernel.org/r/20220615160530.1928801-1-enwlinux@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We use jbd_debug() in some places in ext4. It seems a bit strange to use
jbd2 debugging output function for ext4 code. Also these days
ext4_debug() uses dynamic printk so each debug message can be enabled /
disabled on its own so the time when it made some sense to have these
combined (to allow easier common selecting of messages to report) has
passed. Just convert all jbd_debug() uses in ext4 to ext4_debug().
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Link: https://lore.kernel.org/r/20220608112355.4397-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
After each buddy split, mb_mark_used will search the proper order
for the block which may consume some loop in mb_find_order_for_block.
In fact, we can reuse the order and buddy generated by the buddy split.
Reviewed by: lei.rao@intel.com
Signed-off-by: hanjinke <hanjinke.666@bytedance.com>
Link: https://lore.kernel.org/r/20220606155305.74146-1-hanjinke.666@bytedance.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When the EXT4_IOC_RESIZE_FS ioctl is complete, update the backup
superblocks. We don't do this for the old-style resize ioctls since
they are quite ancient, and only used by very old versions of
resize2fs --- and we don't want to update the backup superblocks every
time EXT4_IOC_GROUP_ADD is called, since it might get called a lot.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20220629040026.112371-2-tytso@mit.edu
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When doing an online resize, the on-disk superblock on-disk wasn't
updated. This means that when the file system is unmounted and
remounted, and the on-disk overhead value is non-zero, this would
result in the results of statfs(2) to be incorrect.
This was partially fixed by Commits 10b01ee92d ("ext4: fix overhead
calculation to account for the reserved gdt blocks"), 85d825dbf4
("ext4: force overhead calculation if the s_overhead_cluster makes no
sense"), and eb7054212e ("ext4: update the cached overhead value in
the superblock").
However, since it was too expensive to forcibly recalculate the
overhead for bigalloc file systems at every mount, this didn't fix the
problem for bigalloc file systems. This commit should address the
problem when resizing file systems with the bigalloc feature enabled.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20220629040026.112371-1-tytso@mit.edu
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Since commit 6493792d32 ("ext4: convert symlink external data block
mapping to bdev"), create new symlink with inline_data is not supported,
but it missing to handle the leftover inlined symlinks, which could
cause below error message and fail to read symlink.
ls: cannot read symbolic link 'foo': Structure needs cleaning
EXT4-fs error (device sda): ext4_map_blocks:605: inode #12: block
2021161080: comm ls: lblock 0 mapped to illegal pblock 2021161080
(length 1)
Fix this regression by adding ext4_read_inline_link(), which read the
inline data directly and convert it through a kmalloced buffer.
Fixes: 6493792d32 ("ext4: convert symlink external data block mapping to bdev")
Cc: stable@kernel.org
Reported-by: Torge Matthies <openglfreak@googlemail.com>
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Tested-by: Torge Matthies <openglfreak@googlemail.com>
Link: https://lore.kernel.org/r/20220630090100.2769490-1-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
-----BEGIN PGP SIGNATURE-----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=celk
-----END PGP SIGNATURE-----
Merge tag 'for-5.20/block-2022-07-29' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
- Improve the type checking of request flags (Bart)
- Ensure queue mapping for a single queues always picks the right queue
(Bart)
- Sanitize the io priority handling (Jan)
- rq-qos race fix (Jinke)
- Reserved tags handling improvements (John)
- Separate memory alignment from file/disk offset aligment for O_DIRECT
(Keith)
- Add new ublk driver, userspace block driver using io_uring for
communication with the userspace backend (Ming)
- Use try_cmpxchg() to cleanup the code in various spots (Uros)
- Finally remove bdevname() (Christoph)
- Clean up the zoned device handling (Christoph)
- Clean up independent access range support (Christoph)
- Clean up and improve block sysfs handling (Christoph)
- Clean up and improve teardown of block devices.
This turns the usual two step process into something that is simpler
to implement and handle in block drivers (Christoph)
- Clean up chunk size handling (Christoph)
- Misc cleanups and fixes (Bart, Bo, Dan, GuoYong, Jason, Keith, Liu,
Ming, Sebastian, Yang, Ying)
* tag 'for-5.20/block-2022-07-29' of git://git.kernel.dk/linux-block: (178 commits)
ublk_drv: fix double shift bug
ublk_drv: make sure that correct flags(features) returned to userspace
ublk_drv: fix error handling of ublk_add_dev
ublk_drv: fix lockdep warning
block: remove __blk_get_queue
block: call blk_mq_exit_queue from disk_release for never added disks
blk-mq: fix error handling in __blk_mq_alloc_disk
ublk: defer disk allocation
ublk: rewrite ublk_ctrl_get_queue_affinity to not rely on hctx->cpumask
ublk: fold __ublk_create_dev into ublk_ctrl_add_dev
ublk: cleanup ublk_ctrl_uring_cmd
ublk: simplify ublk_ch_open and ublk_ch_release
ublk: remove the empty open and release block device operations
ublk: remove UBLK_IO_F_PREFLUSH
ublk: add a MAINTAINERS entry
block: don't allow the same type rq_qos add more than once
mmc: fix disk/queue leak in case of adding disk failure
ublk_drv: fix an IS_ERR() vs NULL check
ublk: remove UBLK_IO_F_INTEGRITY
ublk_drv: remove unneeded semicolon
...
Use a folio throughout __buffer_migrate_folio(), add kernel-doc for
buffer_migrate_folio() and buffer_migrate_folio_norefs(), move their
declarations to buffer.h and switch all filesystems that have wired
them up.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Patch series "v14 fsdax-rmap + v11 fsdax-reflink", v2.
The patchset fsdax-rmap is aimed to support shared pages tracking for
fsdax.
It moves owner tracking from dax_assocaite_entry() to pmem device driver,
by introducing an interface ->memory_failure() for struct pagemap. This
interface is called by memory_failure() in mm, and implemented by pmem
device.
Then call holder operations to find the filesystem which the corrupted
data located in, and call filesystem handler to track files or metadata
associated with this page.
Finally we are able to try to fix the corrupted data in filesystem and do
other necessary processing, such as killing processes who are using the
files affected.
The call trace is like this:
memory_failure()
|* fsdax case
|------------
|pgmap->ops->memory_failure() => pmem_pgmap_memory_failure()
| dax_holder_notify_failure() =>
| dax_device->holder_ops->notify_failure() =>
| - xfs_dax_notify_failure()
| |* xfs_dax_notify_failure()
| |--------------------------
| | xfs_rmap_query_range()
| | xfs_dax_failure_fn()
| | * corrupted on metadata
| | try to recover data, call xfs_force_shutdown()
| | * corrupted on file data
| | try to recover data, call mf_dax_kill_procs()
|* normal case
|-------------
|mf_generic_kill_procs()
The patchset fsdax-reflink attempts to add CoW support for fsdax, and
takes XFS, which has both reflink and fsdax features, as an example.
One of the key mechanisms needed to be implemented in fsdax is CoW. Copy
the data from srcmap before we actually write data to the destination
iomap. And we just copy range in which data won't be changed.
Another mechanism is range comparison. In page cache case, readpage() is
used to load data on disk to page cache in order to be able to compare
data. In fsdax case, readpage() does not work. So, we need another
compare data with direct access support.
With the two mechanisms implemented in fsdax, we are able to make reflink
and fsdax work together in XFS.
This patch (of 14):
To easily track filesystem from a pmem device, we introduce a holder for
dax_device structure, and also its operation. This holder is used to
remember who is using this dax_device:
- When it is the backend of a filesystem, the holder will be the
instance of this filesystem.
- When this pmem device is one of the targets in a mapped device, the
holder will be this mapped device. In this case, the mapped device
has its own dax_device and it will follow the first rule. So that we
can finally track to the filesystem we needed.
The holder and holder_ops will be set when filesystem is being mounted,
or an target device is being activated.
Link: https://lkml.kernel.org/r/20220603053738.1218681-1-ruansy.fnst@fujitsu.com
Link: https://lkml.kernel.org/r/20220603053738.1218681-2-ruansy.fnst@fujitsu.com
Signed-off-by: Shiyang Ruan <ruansy.fnst@fujitsu.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.wiliams@intel.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jane Chu <jane.chu@oracle.com>
Cc: Goldwyn Rodrigues <rgoldwyn@suse.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Goldwyn Rodrigues <rgoldwyn@suse.com>
Cc: Ritesh Harjani <riteshh@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Improve static type checking by using the new blk_opf_t type for
variables that represent request flags.
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Baokun Li <libaokun1@huawei.com>
Cc: Ye Bin <yebin10@huawei.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-52-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Both submit_bh() and ll_rw_block() accept a request operation type and
request flags as their first two arguments. Micro-optimize these two
functions by combining these first two arguments into a single argument.
This patch does not change the behavior of any of the modified code.
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jan Kara <jack@suse.cz>
Acked-by: Song Liu <song@kernel.org> (for the md changes)
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-48-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Replace the remaining calls of bdevname with snprintf using the %pg
format specifier.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20220713055317.1888500-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
mmp_bdevname is currently both initialized nested inside the kthread_run
call in ext4_multi_mount_protect and in the kmmpd thread started by it.
Lift the initiaization out of the kthread_run call in
ext4_multi_mount_protect, move the BUILD_BUG_ON next to it and remove
the duplicate assignment inside of kmmpd.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20220713055317.1888500-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently shrinkers are anonymous objects. For debugging purposes they
can be identified by count/scan function names, but it's not always
useful: e.g. for superblock's shrinkers it's nice to have at least an
idea of to which superblock the shrinker belongs.
This commit adds names to shrinkers. register_shrinker() and
prealloc_shrinker() functions are extended to take a format and arguments
to master a name.
In some cases it's not possible to determine a good name at the time when
a shrinker is allocated. For such cases shrinker_debugfs_rename() is
provided.
The expected format is:
<subsystem>-<shrinker_type>[:<instance>]-<id>
For some shrinkers an instance can be encoded as (MAJOR:MINOR) pair.
After this change the shrinker debugfs directory looks like:
$ cd /sys/kernel/debug/shrinker/
$ ls
dquota-cache-16 sb-devpts-28 sb-proc-47 sb-tmpfs-42
mm-shadow-18 sb-devtmpfs-5 sb-proc-48 sb-tmpfs-43
mm-zspool:zram0-34 sb-hugetlbfs-17 sb-pstore-31 sb-tmpfs-44
rcu-kfree-0 sb-hugetlbfs-33 sb-rootfs-2 sb-tmpfs-49
sb-aio-20 sb-iomem-12 sb-securityfs-6 sb-tracefs-13
sb-anon_inodefs-15 sb-mqueue-21 sb-selinuxfs-22 sb-xfs:vda1-36
sb-bdev-3 sb-nsfs-4 sb-sockfs-8 sb-zsmalloc-19
sb-bpf-32 sb-pipefs-14 sb-sysfs-26 thp-deferred_split-10
sb-btrfs:vda2-24 sb-proc-25 sb-tmpfs-1 thp-zero-9
sb-cgroup2-30 sb-proc-39 sb-tmpfs-27 xfs-buf:vda1-37
sb-configfs-23 sb-proc-41 sb-tmpfs-29 xfs-inodegc:vda1-38
sb-dax-11 sb-proc-45 sb-tmpfs-35
sb-debugfs-7 sb-proc-46 sb-tmpfs-40
[roman.gushchin@linux.dev: fix build warnings]
Link: https://lkml.kernel.org/r/Yr+ZTnLb9lJk6fJO@castle
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lkml.kernel.org/r/20220601032227.4076670-4-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The called functions all use pages, so just convert back to a page.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian Brauner (Microsoft) <brauner@kernel.org>
If the folio is large, it may overlap the beginning or end of the
unused range. If it does, we need to avoid invalidating it.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Now that we introduced new infrastructure to increase the type safety
for filesystems supporting idmapped mounts port the first part of the
vfs over to them.
This ports the attribute changes codepaths to rely on the new better
helpers using a dedicated type.
Before this change we used to take a shortcut and place the actual
values that would be written to inode->i_{g,u}id into struct iattr. This
had the advantage that we moved idmappings mostly out of the picture
early on but it made reasoning about changes more difficult than it
should be.
The filesystem was never explicitly told that it dealt with an idmapped
mount. The transition to the value that needed to be stored in
inode->i_{g,u}id appeared way too early and increased the probability of
bugs in various codepaths.
We know place the same value in struct iattr no matter if this is an
idmapped mount or not. The vfs will only deal with type safe
vfs{g,u}id_t. This makes it massively safer to perform permission checks
as the type will tell us what checks we need to perform and what helpers
we need to use.
Fileystems raising FS_ALLOW_IDMAP can't simply write ia_vfs{g,u}id to
inode->i_{g,u}id since they are different types. Instead they need to
use the dedicated vfs{g,u}id_to_k{g,u}id() helpers that map the
vfs{g,u}id into the filesystem.
The other nice effect is that filesystems like overlayfs don't need to
care about idmappings explicitly anymore and can simply set up struct
iattr accordingly directly.
Link: https://lore.kernel.org/lkml/CAHk-=win6+ahs1EwLkcq8apqLi_1wXFWbrPf340zYEhObpz4jA@mail.gmail.com [1]
Link: https://lore.kernel.org/r/20220621141454.2914719-9-brauner@kernel.org
Cc: Seth Forshee <sforshee@digitalocean.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
CC: linux-fsdevel@vger.kernel.org
Reviewed-by: Seth Forshee <sforshee@digitalocean.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Port the is_quota_modification() and dqout_transfer() helper to type
safe vfs{g,u}id_t. Since these helpers are only called by a few
filesystems don't introduce a new helper but simply extend the existing
helpers to pass down the mount's idmapping.
Note, that this is a non-functional change, i.e. nothing will have
happened here or at the end of this series to how quota are done! This
a change necessary because we will at the end of this series make
ownership changes easier to reason about by keeping the original value
in struct iattr for both non-idmapped and idmapped mounts.
For now we always pass the initial idmapping which makes the idmapping
functions these helpers call nops.
This is done because we currently always pass the actual value to be
written to i_{g,u}id via struct iattr. While this allowed us to treat
the {g,u}id values in struct iattr as values that can be directly
written to inode->i_{g,u}id it also increases the potential for
confusion for filesystems.
Now that we are have dedicated types to prevent this confusion we will
ultimately only map the value from the idmapped mount into a filesystem
value that can be written to inode->i_{g,u}id when the filesystem
actually updates the inode. So pass down the initial idmapping until we
finished that conversion at which point we pass down the mount's
idmapping.
Since struct iattr uses an anonymous union with overlapping types as
supported by the C standard, filesystems that haven't converted to
ia_vfs{g,u}id won't see any difference and things will continue to work
as before. In other words, no functional changes intended with this
change.
Link: https://lore.kernel.org/r/20220621141454.2914719-7-brauner@kernel.org
Cc: Seth Forshee <sforshee@digitalocean.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jan Kara <jack@suse.cz>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
CC: linux-fsdevel@vger.kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Seth Forshee <sforshee@digitalocean.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Earlier we introduced new helpers to abstract ownership update and
remove code duplication. This converts all filesystems supporting
idmapped mounts to make use of these new helpers.
For now we always pass the initial idmapping which makes the idmapping
functions these helpers call nops.
This is done because we currently always pass the actual value to be
written to i_{g,u}id via struct iattr. While this allowed us to treat
the {g,u}id values in struct iattr as values that can be directly
written to inode->i_{g,u}id it also increases the potential for
confusion for filesystems.
Now that we are have dedicated types to prevent this confusion we will
ultimately only map the value from the idmapped mount into a filesystem
value that can be written to inode->i_{g,u}id when the filesystem
actually updates the inode. So pass down the initial idmapping until we
finished that conversion at which point we pass down the mount's
idmapping.
No functional changes intended.
Link: https://lore.kernel.org/r/20220621141454.2914719-6-brauner@kernel.org
Cc: Seth Forshee <sforshee@digitalocean.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
CC: linux-fsdevel@vger.kernel.org
Reviewed-by: Seth Forshee <sforshee@digitalocean.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
We capture a NULL pointer issue when resizing a corrupt ext4 image which
is freshly clear resize_inode feature (not run e2fsck). It could be
simply reproduced by following steps. The problem is because of the
resize_inode feature was cleared, and it will convert the filesystem to
meta_bg mode in ext4_resize_fs(), but the es->s_reserved_gdt_blocks was
not reduced to zero, so could we mistakenly call reserve_backup_gdb()
and passing an uninitialized resize_inode to it when adding new group
descriptors.
mkfs.ext4 /dev/sda 3G
tune2fs -O ^resize_inode /dev/sda #forget to run requested e2fsck
mount /dev/sda /mnt
resize2fs /dev/sda 8G
========
BUG: kernel NULL pointer dereference, address: 0000000000000028
CPU: 19 PID: 3243 Comm: resize2fs Not tainted 5.18.0-rc7-00001-gfde086c5ebfd #748
...
RIP: 0010:ext4_flex_group_add+0xe08/0x2570
...
Call Trace:
<TASK>
ext4_resize_fs+0xbec/0x1660
__ext4_ioctl+0x1749/0x24e0
ext4_ioctl+0x12/0x20
__x64_sys_ioctl+0xa6/0x110
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f2dd739617b
========
The fix is simple, add a check in ext4_resize_begin() to make sure that
the es->s_reserved_gdt_blocks is zero when the resize_inode feature is
disabled.
Cc: stable@kernel.org
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220601092717.763694-1-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Since dx_make_map() may return -EFSCORRUPTED now, so change "count" to
be a signed integer so we can correctly check for an error code returned
by dx_make_map().
Fixes: 46c116b920 ("ext4: verify dir block before splitting it")
Cc: stable@kernel.org
Signed-off-by: Ding Xiang <dingxiang@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20220530100047.537598-1-dingxiang@cmss.chinamobile.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4_mb_normalize_request() can move logical start of allocated blocks
to reduce fragmentation and better utilize preallocation. However logical
block requested as a start of allocation (ac->ac_o_ex.fe_logical) should
always be covered by allocated blocks so we should check that by
modifying and to or in the assertion.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220528110017.354175-3-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Hulk Robot reported a BUG_ON:
==================================================================
kernel BUG at fs/ext4/mballoc.c:3211!
[...]
RIP: 0010:ext4_mb_mark_diskspace_used.cold+0x85/0x136f
[...]
Call Trace:
ext4_mb_new_blocks+0x9df/0x5d30
ext4_ext_map_blocks+0x1803/0x4d80
ext4_map_blocks+0x3a4/0x1a10
ext4_writepages+0x126d/0x2c30
do_writepages+0x7f/0x1b0
__filemap_fdatawrite_range+0x285/0x3b0
file_write_and_wait_range+0xb1/0x140
ext4_sync_file+0x1aa/0xca0
vfs_fsync_range+0xfb/0x260
do_fsync+0x48/0xa0
[...]
==================================================================
Above issue may happen as follows:
-------------------------------------
do_fsync
vfs_fsync_range
ext4_sync_file
file_write_and_wait_range
__filemap_fdatawrite_range
do_writepages
ext4_writepages
mpage_map_and_submit_extent
mpage_map_one_extent
ext4_map_blocks
ext4_mb_new_blocks
ext4_mb_normalize_request
>>> start + size <= ac->ac_o_ex.fe_logical
ext4_mb_regular_allocator
ext4_mb_simple_scan_group
ext4_mb_use_best_found
ext4_mb_new_preallocation
ext4_mb_new_inode_pa
ext4_mb_use_inode_pa
>>> set ac->ac_b_ex.fe_len <= 0
ext4_mb_mark_diskspace_used
>>> BUG_ON(ac->ac_b_ex.fe_len <= 0);
we can easily reproduce this problem with the following commands:
`fallocate -l100M disk`
`mkfs.ext4 -b 1024 -g 256 disk`
`mount disk /mnt`
`fsstress -d /mnt -l 0 -n 1000 -p 1`
The size must be smaller than or equal to EXT4_BLOCKS_PER_GROUP.
Therefore, "start + size <= ac->ac_o_ex.fe_logical" may occur
when the size is truncated. So start should be the start position of
the group where ac_o_ex.fe_logical is located after alignment.
In addition, when the value of fe_logical or EXT4_BLOCKS_PER_GROUP
is very large, the value calculated by start_off is more accurate.
Cc: stable@kernel.org
Fixes: cd648b8a8f ("ext4: trim allocation requests to group size")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220528110017.354175-2-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Since ext4 was converted to the new mount API, the test_dummy_encryption
mount option isn't being handled entirely correctly, because the needed
fscrypt_set_test_dummy_encryption() helper function combines
parsing/checking/applying into one function. That doesn't work well
with the new mount API, which split these into separate steps.
This was sort of okay anyway, due to the parsing logic that was copied
from fscrypt_set_test_dummy_encryption() into ext4_parse_param(),
combined with an additional check in ext4_check_test_dummy_encryption().
However, these overlooked the case of changing the value of
test_dummy_encryption on remount, which isn't allowed but ext4 wasn't
detecting until ext4_apply_options() when it's too late to fail.
Another bug is that if test_dummy_encryption was specified multiple
times with an argument, memory was leaked.
Fix this up properly by using the new helper functions that allow
splitting up the parse/check/apply steps for test_dummy_encryption.
Fixes: cebe85d570 ("ext4: switch to the new mount api")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20220526040412.173025-1-ebiggers@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We got issue as follows:
[home]# mount /dev/sda test
EXT4-fs (sda): warning: mounting fs with errors, running e2fsck is recommended
[home]# dmesg
EXT4-fs (sda): warning: mounting fs with errors, running e2fsck is recommended
EXT4-fs (sda): Errors on filesystem, clearing orphan list.
EXT4-fs (sda): recovery complete
EXT4-fs (sda): mounted filesystem with ordered data mode. Quota mode: none.
[home]# debugfs /dev/sda
debugfs 1.46.5 (30-Dec-2021)
Checksum errors in superblock! Retrying...
Reason is ext4_orphan_cleanup will reset ‘s_last_orphan’ but not update
super block checksum.
To solve above issue, defer update super block checksum after
ext4_orphan_cleanup.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Cc: stable@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220525012904.1604737-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When delayed allocation is disabled (either through mount option or
because we are running low on free space), ext4_write_begin() allocates
blocks with EXT4_GET_BLOCKS_IO_CREATE_EXT flag. With this flag extent
merging is disabled and since ext4_write_begin() is called for each page
separately, we end up with a *lot* of 1 block extents in the extent tree
and following writeback is writing 1 block at a time which results in
very poor write throughput (4 MB/s instead of 200 MB/s). These days when
ext4_get_block_unwritten() is used only by ext4_write_begin(),
ext4_page_mkwrite() and inline data conversion, we can safely allow
extent merging to happen from these paths since following writeback will
happen on different boundaries anyway. So use
EXT4_GET_BLOCKS_CREATE_UNRIT_EXT instead which restores the performance.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220520111402.4252-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We have already check the io_error and uptodate flag before submitting
the superblock buffer, and re-set the uptodate flag if it has been
failed to write out. But it was lockless and could be raced by another
ext4_commit_super(), and finally trigger '!uptodate' WARNING when
marking buffer dirty. Fix it by submit buffer directly.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220520023216.3065073-1-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
- Appoint myself page cache maintainer
- Fix how scsicam uses the page cache
- Use the memalloc_nofs_save() API to replace AOP_FLAG_NOFS
- Remove the AOP flags entirely
- Remove pagecache_write_begin() and pagecache_write_end()
- Documentation updates
- Convert several address_space operations to use folios:
- is_dirty_writeback
- readpage becomes read_folio
- releasepage becomes release_folio
- freepage becomes free_folio
- Change filler_t to require a struct file pointer be the first argument
like ->read_folio
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEejHryeLBw/spnjHrDpNsjXcpgj4FAmKNMDUACgkQDpNsjXcp
gj4/mwf/bpHhXH4ZoNIvtUpTF6rZbqeffmc0VrbxCZDZ6igRnRPglxZ9H9v6L53O
7B0FBQIfxgNKHZpdqGdOkv8cjg/GMe/HJUbEy5wOakYPo4L9fZpHbDZ9HM2Eankj
xBqLIBgBJ7doKr+Y62DAN19TVD8jfRfVtli5mqXJoNKf65J7BkxljoTH1L3EXD9d
nhLAgyQjR67JQrT/39KMW+17GqLhGefLQ4YnAMONtB6TVwX/lZmigKpzVaCi4r26
bnk5vaR/3PdjtNxIoYvxdc71y2Eg05n2jEq9Wcy1AaDv/5vbyZUlZ2aBSaIVbtKX
WfrhN9O3L0bU5qS7p9PoyfLc9wpq8A==
=djLv
-----END PGP SIGNATURE-----
Merge tag 'folio-5.19' of git://git.infradead.org/users/willy/pagecache
Pull page cache updates from Matthew Wilcox:
- Appoint myself page cache maintainer
- Fix how scsicam uses the page cache
- Use the memalloc_nofs_save() API to replace AOP_FLAG_NOFS
- Remove the AOP flags entirely
- Remove pagecache_write_begin() and pagecache_write_end()
- Documentation updates
- Convert several address_space operations to use folios:
- is_dirty_writeback
- readpage becomes read_folio
- releasepage becomes release_folio
- freepage becomes free_folio
- Change filler_t to require a struct file pointer be the first
argument like ->read_folio
* tag 'folio-5.19' of git://git.infradead.org/users/willy/pagecache: (107 commits)
nilfs2: Fix some kernel-doc comments
Appoint myself page cache maintainer
fs: Remove aops->freepage
secretmem: Convert to free_folio
nfs: Convert to free_folio
orangefs: Convert to free_folio
fs: Add free_folio address space operation
fs: Convert drop_buffers() to use a folio
fs: Change try_to_free_buffers() to take a folio
jbd2: Convert release_buffer_page() to use a folio
jbd2: Convert jbd2_journal_try_to_free_buffers to take a folio
reiserfs: Convert release_buffer_page() to use a folio
fs: Remove last vestiges of releasepage
ubifs: Convert to release_folio
reiserfs: Convert to release_folio
orangefs: Convert to release_folio
ocfs2: Convert to release_folio
nilfs2: Remove comment about releasepage
nfs: Convert to release_folio
jfs: Convert to release_folio
...
crypto related fucntions from fs/ext4/super.c into a new
fs/ext4/crypto.c, and fix a number of bugs found by fuzzers and error
injection tools.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmKNOh0ACgkQ8vlZVpUN
gaP4kwf+KfqZ/iBDOOCMKV5C7/Z4ieiMLeNqzCWmvju7jceYBoSLOIz3w5MFjEV9
5ZB/6MovMZ/vZRtm76k0K01ayHKUd1BKjwwvIaABjdNVDTar5Wg/Tq7MF0OMQ5Kw
ec5rvOQ05VzbXwf/JOjp7IHP/9yEbtgKjAYzgVyMVGrE8jxLQ+UOSUBzzZEHv/js
Xh7GmRGEs5V7bj+V4SuCaEKSf3wYjT/zlJNIPtsg9RJeQojOP2qlOFhcGeduF1X/
E4OwabfHqdmlbdI0vL3ANb8nByi/bA0p8i9PGqGIDx0nRUK9UzJCjePmkPux6koT
pPZLo8DKR8g5i0Hn/ennA9tAIXIaXg==
=OliY
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"Various bug fixes and cleanups for ext4.
In particular, move the crypto related fucntions from fs/ext4/super.c
into a new fs/ext4/crypto.c, and fix a number of bugs found by fuzzers
and error injection tools"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (25 commits)
ext4: only allow test_dummy_encryption when supported
ext4: fix bug_on in __es_tree_search
ext4: avoid cycles in directory h-tree
ext4: verify dir block before splitting it
ext4: filter out EXT4_FC_REPLAY from on-disk superblock field s_state
ext4: fix bug_on in ext4_writepages
ext4: refactor and move ext4_ioctl_get_encryption_pwsalt()
ext4: cleanup function defs from ext4.h into crypto.c
ext4: move ext4 crypto code to its own file crypto.c
ext4: fix memory leak in parse_apply_sb_mount_options()
ext4: reject the 'commit' option on ext2 filesystems
ext4: remove duplicated #include of dax.h in inode.c
ext4: fix race condition between ext4_write and ext4_convert_inline_data
ext4: convert symlink external data block mapping to bdev
ext4: add nowait mode for ext4_getblk()
ext4: fix journal_ioprio mount option handling
ext4: mark group as trimmed only if it was fully scanned
ext4: fix use-after-free in ext4_rename_dir_prepare
ext4: add unmount filesystem message
ext4: remove unnecessary conditionals
...
-----BEGIN PGP SIGNATURE-----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=lv6P
-----END PGP SIGNATURE-----
Merge tag 'for-5.19-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"Features:
- subpage:
- support for PAGE_SIZE > 4K (previously only 64K)
- make it work with raid56
- repair super block num_devices automatically if it does not match
the number of device items
- defrag can convert inline extents to regular extents, up to now
inline files were skipped but the setting of mount option
max_inline could affect the decision logic
- zoned:
- minimal accepted zone size is explicitly set to 4MiB
- make zone reclaim less aggressive and don't reclaim if there are
enough free zones
- add per-profile sysfs tunable of the reclaim threshold
- allow automatic block group reclaim for non-zoned filesystems, with
sysfs tunables
- tree-checker: new check, compare extent buffer owner against owner
rootid
Performance:
- avoid blocking on space reservation when doing nowait direct io
writes (+7% throughput for reads and writes)
- NOCOW write throughput improvement due to refined locking (+3%)
- send: reduce pressure to page cache by dropping extent pages right
after they're processed
Core:
- convert all radix trees to xarray
- add iterators for b-tree node items
- support printk message index
- user bulk page allocation for extent buffers
- switch to bio_alloc API, use on-stack bios where convenient, other
bio cleanups
- use rw lock for block groups to favor concurrent reads
- simplify workques, don't allocate high priority threads for all
normal queues as we need only one
- refactor scrub, process chunks based on their constraints and
similarity
- allocate direct io structures on stack and pass around only
pointers, avoids allocation and reduces potential error handling
Fixes:
- fix count of reserved transaction items for various inode
operations
- fix deadlock between concurrent dio writes when low on free data
space
- fix a few cases when zones need to be finished
VFS, iomap:
- add helper to check if sb write has started (usable for assertions)
- new helper iomap_dio_alloc_bio, export iomap_dio_bio_end_io"
* tag 'for-5.19-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (173 commits)
btrfs: zoned: introduce a minimal zone size 4M and reject mount
btrfs: allow defrag to convert inline extents to regular extents
btrfs: add "0x" prefix for unsupported optional features
btrfs: do not account twice for inode ref when reserving metadata units
btrfs: zoned: fix comparison of alloc_offset vs meta_write_pointer
btrfs: send: avoid trashing the page cache
btrfs: send: keep the current inode open while processing it
btrfs: allocate the btrfs_dio_private as part of the iomap dio bio
btrfs: move struct btrfs_dio_private to inode.c
btrfs: remove the disk_bytenr in struct btrfs_dio_private
btrfs: allocate dio_data on stack
iomap: add per-iomap_iter private data
iomap: allow the file system to provide a bio_set for direct I/O
btrfs: add a btrfs_dio_rw wrapper
btrfs: zoned: zone finish unused block group
btrfs: zoned: properly finish block group on metadata write
btrfs: zoned: finish block group when there are no more allocatable bytes left
btrfs: zoned: consolidate zone finish functions
btrfs: zoned: introduce btrfs_zoned_bg_is_full
btrfs: improve error reporting in lookup_inline_extent_backref
...
Make the test_dummy_encryption mount option require that the encrypt
feature flag be already enabled on the filesystem, rather than
automatically enabling it. Practically, this means that "-O encrypt"
will need to be included in MKFS_OPTIONS when running xfstests with the
test_dummy_encryption mount option. (ext4/053 also needs an update.)
Moreover, as long as the preconditions for test_dummy_encryption are
being tightened anyway, take the opportunity to start rejecting it when
!CONFIG_FS_ENCRYPTION rather than ignoring it.
The motivation for requiring the encrypt feature flag is that:
- Having the filesystem auto-enable feature flags is problematic, as it
bypasses the usual sanity checks. The specific issue which came up
recently is that in kernel versions where ext4 supports casefold but
not encrypt+casefold (v5.1 through v5.10), the kernel will happily add
the encrypt flag to a filesystem that has the casefold flag, making it
unmountable -- but only for subsequent mounts, not the initial one.
This confused the casefold support detection in xfstests, causing
generic/556 to fail rather than be skipped.
- The xfstests-bld test runners (kvm-xfstests et al.) already use the
required mkfs flag, so they will not be affected by this change. Only
users of test_dummy_encryption alone will be affected. But, this
option has always been for testing only, so it should be fine to
require that the few users of this option update their test scripts.
- f2fs already requires it (for its equivalent feature flag).
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Link: https://lore.kernel.org/r/20220519204437.61645-1-ebiggers@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
