mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-05 10:04:12 +08:00
87fda1acfc
338 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Dave Marchevsky
|
391145ba2a |
bpf: Add __bpf_kfunc_{start,end}_defs macros
BPF kfuncs are meant to be called from BPF programs. Accordingly, most
kfuncs are not called from anywhere in the kernel, which the
-Wmissing-prototypes warning is unhappy about. We've peppered
__diag_ignore_all("-Wmissing-prototypes", ... everywhere kfuncs are
defined in the codebase to suppress this warning.
This patch adds two macros meant to bound one or many kfunc definitions.
All existing kfunc definitions which use these __diag calls to suppress
-Wmissing-prototypes are migrated to use the newly-introduced macros.
A new __diag_ignore_all - for "-Wmissing-declarations" - is added to the
__bpf_kfunc_start_defs macro based on feedback from Andrii on an earlier
version of this patch [0] and another recent mailing list thread [1].
In the future we might need to ignore different warnings or do other
kfunc-specific things. This change will make it easier to make such
modifications for all kfunc defs.
[0]: https://lore.kernel.org/bpf/CAEf4BzaE5dRWtK6RPLnjTW-MW9sx9K3Fn6uwqCTChK2Dcb1Xig@mail.gmail.com/
[1]: https://lore.kernel.org/bpf/ZT+2qCc%2FaXep0%2FLf@krava/
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Cc: Jiri Olsa <olsajiri@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: David Vernet <void@manifault.com>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Link: https://lore.kernel.org/r/20231031215625.2343848-1-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
||
Jiri Olsa
|
dd8657894c |
bpf: Count missed stats in trace_call_bpf
Increase misses stats in case bpf array execution is skipped because of recursion check in trace_call_bpf. Adding bpf_prog_inc_misses_counters that increase misses counts for all bpf programs in bpf_prog_array. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Tested-by: Song Liu <song@kernel.org> Reviewed-by: Song Liu <song@kernel.org> Link: https://lore.kernel.org/bpf/20230920213145.1941596-5-jolsa@kernel.org |
||
|
Jiri Olsa
|
3acf8ace68 |
bpf: Add missed value to kprobe perf link info
Add missed value to kprobe attached through perf link info to hold the stats of missed kprobe handler execution. The kprobe's missed counter gets incremented when kprobe handler is not executed due to another kprobe running on the same cpu. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20230920213145.1941596-4-jolsa@kernel.org |
||
|
Jiri Olsa
|
e2b2cd592a |
bpf: Add missed value to kprobe_multi link info
Add missed value to kprobe_multi link info to hold the stats of missed kprobe_multi probe. The missed counter gets incremented when fprobe fails the recursion check or there's no rethook available for return probe. In either case the attached bpf program is not executed. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Tested-by: Song Liu <song@kernel.org> Reviewed-by: Song Liu <song@kernel.org> Acked-by: Hou Tao <houtao1@huawei.com> Link: https://lore.kernel.org/bpf/20230920213145.1941596-3-jolsa@kernel.org |
||
|
Jiri Olsa
|
f915fcb385 |
bpf: Count stats for kprobe_multi programs
Adding support to gather missed stats for kprobe_multi programs due to bpf_prog_active protection. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Tested-by: Song Liu <song@kernel.org> Reviewed-by: Song Liu <song@kernel.org> Link: https://lore.kernel.org/bpf/20230920213145.1941596-2-jolsa@kernel.org |
||
|
Jiri Olsa
|
57eb5e1c5c |
bpf: Fix uprobe_multi get_pid_task error path
Dan reported Smatch static checker warning due to missing error value set in uprobe multi link's get_pid_task error path. Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/bpf/c5ffa7c0-6b06-40d5-aca2-63833b5cd9af@moroto.mountain/ Signed-off-by: Jiri Olsa <jolsa@kernel.org> Reviewed-by: Song Liu <song@kernel.org> Link: https://lore.kernel.org/r/20230915101420.1193800-1-jolsa@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Jiri Olsa
|
41bc46c12a |
bpf: Add override check to kprobe multi link attach
Currently the multi_kprobe link attach does not check error
injection list for programs with bpf_override_return helper
and allows them to attach anywhere. Adding the missing check.
Fixes:
|
||
|
Jiri Olsa
|
686328d80c |
bpf: Add bpf_get_func_ip helper support for uprobe link
Adding support for bpf_get_func_ip helper being called from ebpf program attached by uprobe_multi link. It returns the ip of the uprobe. Acked-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Yonghong Song <yonghong.song@linux.dev> Link: https://lore.kernel.org/r/20230809083440.3209381-7-jolsa@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Jiri Olsa
|
b733eeade4 |
bpf: Add pid filter support for uprobe_multi link
Adding support to specify pid for uprobe_multi link and the uprobes are created only for task with given pid value. Using the consumer.filter filter callback for that, so the task gets filtered during the uprobe installation. We still need to check the task during runtime in the uprobe handler, because the handler could get executed if there's another system wide consumer on the same uprobe (thanks Oleg for the insight). Cc: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Yonghong Song <yonghong.song@linux.dev> Link: https://lore.kernel.org/r/20230809083440.3209381-6-jolsa@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Jiri Olsa
|
0b779b61f6 |
bpf: Add cookies support for uprobe_multi link
Adding support to specify cookies array for uprobe_multi link. The cookies array share indexes and length with other uprobe_multi arrays (offsets/ref_ctr_offsets). The cookies[i] value defines cookie for i-the uprobe and will be returned by bpf_get_attach_cookie helper when called from ebpf program hooked to that specific uprobe. Acked-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Yafang Shao <laoar.shao@gmail.com> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Yonghong Song <yonghong.song@linux.dev> Link: https://lore.kernel.org/r/20230809083440.3209381-5-jolsa@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Jiri Olsa
|
89ae89f53d |
bpf: Add multi uprobe link
Adding new multi uprobe link that allows to attach bpf program
to multiple uprobes.
Uprobes to attach are specified via new link_create uprobe_multi
union:
struct {
__aligned_u64 path;
__aligned_u64 offsets;
__aligned_u64 ref_ctr_offsets;
__u32 cnt;
__u32 flags;
} uprobe_multi;
Uprobes are defined for single binary specified in path and multiple
calling sites specified in offsets array with optional reference
counters specified in ref_ctr_offsets array. All specified arrays
have length of 'cnt'.
The 'flags' supports single bit for now that marks the uprobe as
return probe.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230809083440.3209381-4-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
||
|
Jiri Olsa
|
a3c485a5d8 |
bpf: Add support for bpf_get_func_ip helper for uprobe program
Adding support for bpf_get_func_ip helper for uprobe program to return
probed address for both uprobe and return uprobe.
We discussed this in [1] and agreed that uprobe can have special use
of bpf_get_func_ip helper that differs from kprobe.
The kprobe bpf_get_func_ip returns:
- address of the function if probe is attach on function entry
for both kprobe and return kprobe
- 0 if the probe is not attach on function entry
The uprobe bpf_get_func_ip returns:
- address of the probe for both uprobe and return uprobe
The reason for this semantic change is that kernel can't really tell
if the probe user space address is function entry.
The uprobe program is actually kprobe type program attached as uprobe.
One of the consequences of this design is that uprobes do not have its
own set of helpers, but share them with kprobes.
As we need different functionality for bpf_get_func_ip helper for uprobe,
I'm adding the bool value to the bpf_trace_run_ctx, so the helper can
detect that it's executed in uprobe context and call specific code.
The is_uprobe bool is set as true in bpf_prog_run_array_sleepable, which
is currently used only for executing bpf programs in uprobe.
Renaming bpf_prog_run_array_sleepable to bpf_prog_run_array_uprobe
to address that it's only used for uprobes and that it sets the
run_ctx.is_uprobe as suggested by Yafang Shao.
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Alan Maguire <alan.maguire@oracle.com>
[1] https://lore.kernel.org/bpf/CAEf4BzZ=xLVkG5eurEuvLU79wAMtwho7ReR+XJAgwhFF4M-7Cg@mail.gmail.com/
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Viktor Malik <vmalik@redhat.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230807085956.2344866-2-jolsa@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
||
Jakub Kicinski
|
d07b7b32da |
pull-request: bpf-next 2023-08-03
-----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQRdM/uy1Ege0+EN1fNar9k/UBDW4wUCZMvevwAKCRBar9k/UBDW 42Z0AP90hLZ9OmoghYAlALHLl8zqXuHCV8OeFXR5auqG+kkcCwEAx6h99vnh4zgP Tngj6Yid60o39/IZXXblhV37HfSiyQ8= =/kVE -----END PGP SIGNATURE----- Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next Martin KaFai Lau says: ==================== pull-request: bpf-next 2023-08-03 We've added 54 non-merge commits during the last 10 day(s) which contain a total of 84 files changed, 4026 insertions(+), 562 deletions(-). The main changes are: 1) Add SO_REUSEPORT support for TC bpf_sk_assign from Lorenz Bauer, Daniel Borkmann 2) Support new insns from cpu v4 from Yonghong Song 3) Non-atomically allocate freelist during prefill from YiFei Zhu 4) Support defragmenting IPv(4|6) packets in BPF from Daniel Xu 5) Add tracepoint to xdp attaching failure from Leon Hwang 6) struct netdev_rx_queue and xdp.h reshuffling to reduce rebuild time from Jakub Kicinski * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (54 commits) net: invert the netdevice.h vs xdp.h dependency net: move struct netdev_rx_queue out of netdevice.h eth: add missing xdp.h includes in drivers selftests/bpf: Add testcase for xdp attaching failure tracepoint bpf, xdp: Add tracepoint to xdp attaching failure selftests/bpf: fix static assert compilation issue for test_cls_*.c bpf: fix bpf_probe_read_kernel prototype mismatch riscv, bpf: Adapt bpf trampoline to optimized riscv ftrace framework libbpf: fix typos in Makefile tracing: bpf: use struct trace_entry in struct syscall_tp_t bpf, devmap: Remove unused dtab field from bpf_dtab_netdev bpf, cpumap: Remove unused cmap field from bpf_cpu_map_entry netfilter: bpf: Only define get_proto_defrag_hook() if necessary bpf: Fix an array-index-out-of-bounds issue in disasm.c net: remove duplicate INDIRECT_CALLABLE_DECLARE of udp[6]_ehashfn docs/bpf: Fix malformed documentation bpf: selftests: Add defrag selftests bpf: selftests: Support custom type and proto for client sockets bpf: selftests: Support not connecting client socket netfilter: bpf: Support BPF_F_NETFILTER_IP_DEFRAG in netfilter link ... ==================== Link: https://lore.kernel.org/r/20230803174845.825419-1-martin.lau@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Jakub Kicinski
|
35b1b1fd96 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR. Conflicts: net/dsa/port.c |
||
Arnd Bergmann
|
6a5a148aaf |
bpf: fix bpf_probe_read_kernel prototype mismatch
bpf_probe_read_kernel() has a __weak definition in core.c and another
definition with an incompatible prototype in kernel/trace/bpf_trace.c,
when CONFIG_BPF_EVENTS is enabled.
Since the two are incompatible, there cannot be a shared declaration in
a header file, but the lack of a prototype causes a W=1 warning:
kernel/bpf/core.c:1638:12: error: no previous prototype for 'bpf_probe_read_kernel' [-Werror=missing-prototypes]
On 32-bit architectures, the local prototype
u64 __weak bpf_probe_read_kernel(void *dst, u32 size, const void *unsafe_ptr)
passes arguments in other registers as the one in bpf_trace.c
BPF_CALL_3(bpf_probe_read_kernel, void *, dst, u32, size,
const void *, unsafe_ptr)
which uses 64-bit arguments in pairs of registers.
As both versions of the function are fairly simple and only really
differ in one line, just move them into a header file as an inline
function that does not add any overhead for the bpf_trace.c callers
and actually avoids a function call for the other one.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/ac25cb0f-b804-1649-3afb-1dc6138c2716@iogearbox.net/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230801111449.185301-1-arnd@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
||
|
Jiri Olsa
|
d62cc390c2 |
bpf: Disable preemption in bpf_event_output
We received report [1] of kernel crash, which is caused by
using nesting protection without disabled preemption.
The bpf_event_output can be called by programs executed by
bpf_prog_run_array_cg function that disabled migration but
keeps preemption enabled.
This can cause task to be preempted by another one inside the
nesting protection and lead eventually to two tasks using same
perf_sample_data buffer and cause crashes like:
BUG: kernel NULL pointer dereference, address: 0000000000000001
#PF: supervisor instruction fetch in kernel mode
#PF: error_code(0x0010) - not-present page
...
? perf_output_sample+0x12a/0x9a0
? finish_task_switch.isra.0+0x81/0x280
? perf_event_output+0x66/0xa0
? bpf_event_output+0x13a/0x190
? bpf_event_output_data+0x22/0x40
? bpf_prog_dfc84bbde731b257_cil_sock4_connect+0x40a/0xacb
? xa_load+0x87/0xe0
? __cgroup_bpf_run_filter_sock_addr+0xc1/0x1a0
? release_sock+0x3e/0x90
? sk_setsockopt+0x1a1/0x12f0
? udp_pre_connect+0x36/0x50
? inet_dgram_connect+0x93/0xa0
? __sys_connect+0xb4/0xe0
? udp_setsockopt+0x27/0x40
? __pfx_udp_push_pending_frames+0x10/0x10
? __sys_setsockopt+0xdf/0x1a0
? __x64_sys_connect+0xf/0x20
? do_syscall_64+0x3a/0x90
? entry_SYSCALL_64_after_hwframe+0x72/0xdc
Fixing this by disabling preemption in bpf_event_output.
[1] https://github.com/cilium/cilium/issues/26756
Cc: stable@vger.kernel.org
Reported-by: Oleg "livelace" Popov <o.popov@livelace.ru>
Closes: https://github.com/cilium/cilium/issues/26756
Fixes:
|
||
|
Jiri Olsa
|
f2c67a3e60 |
bpf: Disable preemption in bpf_perf_event_output
The nesting protection in bpf_perf_event_output relies on disabled
preemption, which is guaranteed for kprobes and tracepoints.
However bpf_perf_event_output can be also called from uprobes context
through bpf_prog_run_array_sleepable function which disables migration,
but keeps preemption enabled.
This can cause task to be preempted by another one inside the nesting
protection and lead eventually to two tasks using same perf_sample_data
buffer and cause crashes like:
kernel tried to execute NX-protected page - exploit attempt? (uid: 0)
BUG: unable to handle page fault for address: ffffffff82be3eea
...
Call Trace:
? __die+0x1f/0x70
? page_fault_oops+0x176/0x4d0
? exc_page_fault+0x132/0x230
? asm_exc_page_fault+0x22/0x30
? perf_output_sample+0x12b/0x910
? perf_event_output+0xd0/0x1d0
? bpf_perf_event_output+0x162/0x1d0
? bpf_prog_c6271286d9a4c938_krava1+0x76/0x87
? __uprobe_perf_func+0x12b/0x540
? uprobe_dispatcher+0x2c4/0x430
? uprobe_notify_resume+0x2da/0xce0
? atomic_notifier_call_chain+0x7b/0x110
? exit_to_user_mode_prepare+0x13e/0x290
? irqentry_exit_to_user_mode+0x5/0x30
? asm_exc_int3+0x35/0x40
Fixing this by disabling preemption in bpf_perf_event_output.
Cc: stable@vger.kernel.org
Fixes:
|
||
|
Jakub Kicinski
|
d2afa89f66 |
for-netdev
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE+soXsSLHKoYyzcli6rmadz2vbToFAmSwqwoACgkQ6rmadz2v bTqOHRAAn+fzTLqUqsveFQcxOkie5MPHxKoOTjG4+yFR7rzPkU6Mn5RX3w5yFzSn RqutwykF9OgipAzC3QXv4pRJuq6Gia5nvwUSDP4CX273ljyeF54DK7HfopE1+YrK HXyBWZvVvMZP6q7qQyQ3qtbHZSjs5XP/M6YBlJ5zo/BTLFCyvbSDP14YKEqcBkWG ld72ElXFxlnr/zEfRjzBCfMlbmgeHLO0SiHS/9827zEmNP1AAH5/ETA7/rJ7yCJs QNQUIoJWob8xm5FMJ6CU/+sOqXR1CY053meGJFFBX5pvVD/CLRhrwHn0IMCyQqmh wKR5waeXhpl/CKNeFuxXVMNFiXbqBb/0LYJaJtrMysjMLTsQ9X7NkrDBa/+kYGyZ +ghGlaMQvPqUGg0rLH2nl9JNB8Ne/8prLMsAKUWnPuOo+Q03j054gnqhGeNtDd5b gpSk+7x93PlhGcegBV1Wk8dkiGC5V9nTVNxg40XQUCs4k9L/8Vjc35Tjqx7nBTNH DiFD24DDKUZacw9L6nEqvLF/N2fiRjtUZnVPC0yn/annyBcfX1s+ZH2Tu1F6Qk38 QMfBCnt12exmsiDoxdzzGJtjHnS/k5fsaKjlR21mOyMrIH7ipltr5UHHrdr1hBP6 24uSeTImvQQKDi+9IuXN127jZDOupKqVS6csrA0ZXrlKWh2HR+U= =GVUB -----END PGP SIGNATURE----- Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next Alexei Starovoitov says: ==================== pull-request: bpf-next 2023-07-13 We've added 67 non-merge commits during the last 15 day(s) which contain a total of 106 files changed, 4444 insertions(+), 619 deletions(-). The main changes are: 1) Fix bpftool build in presence of stale vmlinux.h, from Alexander Lobakin. 2) Introduce bpf_me_mcache_free_rcu() and fix OOM under stress, from Alexei Starovoitov. 3) Teach verifier actual bounds of bpf_get_smp_processor_id() and fix perf+libbpf issue related to custom section handling, from Andrii Nakryiko. 4) Introduce bpf map element count, from Anton Protopopov. 5) Check skb ownership against full socket, from Kui-Feng Lee. 6) Support for up to 12 arguments in BPF trampoline, from Menglong Dong. 7) Export rcu_request_urgent_qs_task, from Paul E. McKenney. 8) Fix BTF walking of unions, from Yafang Shao. 9) Extend link_info for kprobe_multi and perf_event links, from Yafang Shao. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (67 commits) selftests/bpf: Add selftest for PTR_UNTRUSTED bpf: Fix an error in verifying a field in a union selftests/bpf: Add selftests for nested_trust bpf: Fix an error around PTR_UNTRUSTED selftests/bpf: add testcase for TRACING with 6+ arguments bpf, x86: allow function arguments up to 12 for TRACING bpf, x86: save/restore regs with BPF_DW size bpftool: Use "fallthrough;" keyword instead of comments bpf: Add object leak check. bpf: Convert bpf_cpumask to bpf_mem_cache_free_rcu. bpf: Introduce bpf_mem_free_rcu() similar to kfree_rcu(). selftests/bpf: Improve test coverage of bpf_mem_alloc. rcu: Export rcu_request_urgent_qs_task() bpf: Allow reuse from waiting_for_gp_ttrace list. bpf: Add a hint to allocated objects. bpf: Change bpf_mem_cache draining process. bpf: Further refactor alloc_bulk(). bpf: Factor out inc/dec of active flag into helpers. bpf: Refactor alloc_bulk(). bpf: Let free_all() return the number of freed elements. ... ==================== Link: https://lore.kernel.org/r/20230714020910.80794-1-alexei.starovoitov@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
Yafang Shao
|
1b715e1b0e |
bpf: Support ->fill_link_info for perf_event
By introducing support for ->fill_link_info to the perf_event link, users gain the ability to inspect it using `bpftool link show`. While the current approach involves accessing this information via `bpftool perf show`, consolidating link information for all link types in one place offers greater convenience. Additionally, this patch extends support to the generic perf event, which is not currently accommodated by `bpftool perf show`. While only the perf type and config are exposed to userspace, other attributes such as sample_period and sample_freq are ignored. It's important to note that if kptr_restrict is not permitted, the probed address will not be exposed, maintaining security measures. A new enum bpf_perf_event_type is introduced to help the user understand which struct is relevant. Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/r/20230709025630.3735-9-laoar.shao@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Yafang Shao
|
5125e757e6 |
bpf: Clear the probe_addr for uprobe
To avoid returning uninitialized or random values when querying the file
descriptor (fd) and accessing probe_addr, it is necessary to clear the
variable prior to its use.
Fixes:
|
||
|
Yafang Shao
|
7ac8d0d261 |
bpf: Support ->fill_link_info for kprobe_multi
With the addition of support for fill_link_info to the kprobe_multi link, users will gain the ability to inspect it conveniently using the `bpftool link show`. This enhancement provides valuable information to the user, including the count of probed functions and their respective addresses. It's important to note that if the kptr_restrict setting is not permitted, the probed address will not be exposed, ensuring security. Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20230709025630.3735-2-laoar.shao@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
Linus Torvalds
|
d2a6fd45c5 |
Probes updates for v6.5:
- fprobe: Pass return address to the fprobe entry/exit callbacks so that
the callbacks don't need to analyze pt_regs/stack to find the function
return address.
- kprobe events: cleanup usage of TPARG_FL_FENTRY and TPARG_FL_RETURN
flags so that those are not set at once.
- fprobe events:
. Add a new fprobe events for tracing arbitrary function entry and
exit as a trace event.
. Add a new tracepoint events for tracing raw tracepoint as a trace
event. This allows user to trace non user-exposed tracepoints.
. Move eprobe's event parser code into probe event common file.
. Introduce BTF (BPF type format) support to kernel probe (kprobe,
fprobe and tracepoint probe) events so that user can specify traced
function arguments by name. This also applies the type of argument
when fetching the argument.
. Introduce '$arg*' wildcard support if BTF is available. This expands
the '$arg*' meta argument to all function argument automatically.
. Check the return value types by BTF. If the function returns 'void',
'$retval' is rejected.
. Add some selftest script for fprobe events, tracepoint events and
BTF support.
. Update documentation about the fprobe events.
. Some fixes for above features, document and selftests.
- selftests for ftrace (except for new fprobe events):
. Add a test case for multiple consecutive probes in a function which
checks if ftrace based kprobe, optimized kprobe and normal kprobe
can be defined in the same target function.
. Add a test case for optimized probe, which checks whether kprobe
can be optimized or not.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmSa+9MACgkQ2/sHvwUr
PxsmOAgAmUOIWtvH5py7AZpIRhCj8B18F6KnT7w2hByCsRxf7SaCqMhpBCk9VnYv
9fJFBHpvYRJEmpHoH3o2ET5AGfKVNac9z96AGI2qJ4ECWITd6I5+WfTdZ5ueVn2d
f6DQ10mHXDHSMFbuqfYWSHtkeivJpWpUNHhwzPb4doNOe06bZNfVuSgnksFg1at5
kq16HbvGnhPzdO4YHmvqwjmRHr5/nCI1KDE9xIBcqNtWFbiRigC11zaZEUkLX+vT
F63ShyfCK718AiwDfnjXpGkXAiVOZuAIR8RELaSqQ92YHCFKq5k9K4++WllPR5f9
AxjVultFDiCd4oSPgYpQkjuZdFq9NA==
=IhmY
-----END PGP SIGNATURE-----
Merge tag 'probes-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes updates from Masami Hiramatsu:
- fprobe: Pass return address to the fprobe entry/exit callbacks so
that the callbacks don't need to analyze pt_regs/stack to find the
function return address.
- kprobe events: cleanup usage of TPARG_FL_FENTRY and TPARG_FL_RETURN
flags so that those are not set at once.
- fprobe events:
- Add a new fprobe events for tracing arbitrary function entry and
exit as a trace event.
- Add a new tracepoint events for tracing raw tracepoint as a
trace event. This allows user to trace non user-exposed
tracepoints.
- Move eprobe's event parser code into probe event common file.
- Introduce BTF (BPF type format) support to kernel probe (kprobe,
fprobe and tracepoint probe) events so that user can specify
traced function arguments by name. This also applies the type of
argument when fetching the argument.
- Introduce '$arg*' wildcard support if BTF is available. This
expands the '$arg*' meta argument to all function argument
automatically.
- Check the return value types by BTF. If the function returns
'void', '$retval' is rejected.
- Add some selftest script for fprobe events, tracepoint events
and BTF support.
- Update documentation about the fprobe events.
- Some fixes for above features, document and selftests.
- selftests for ftrace (in addition to the new fprobe events):
- Add a test case for multiple consecutive probes in a function
which checks if ftrace based kprobe, optimized kprobe and normal
kprobe can be defined in the same target function.
- Add a test case for optimized probe, which checks whether kprobe
can be optimized or not.
* tag 'probes-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/probes: Fix tracepoint event with $arg* to fetch correct argument
Documentation: Fix typo of reference file name
tracing/probes: Fix to return NULL and keep using current argc
selftests/ftrace: Add new test case which checks for optimized probes
selftests/ftrace: Add new test case which adds multiple consecutive probes in a function
Documentation: tracing/probes: Add fprobe event tracing document
selftests/ftrace: Add BTF arguments test cases
selftests/ftrace: Add tracepoint probe test case
tracing/probes: Add BTF retval type support
tracing/probes: Add $arg* meta argument for all function args
tracing/probes: Support function parameters if BTF is available
tracing/probes: Move event parameter fetching code to common parser
tracing/probes: Add tracepoint support on fprobe_events
selftests/ftrace: Add fprobe related testcases
tracing/probes: Add fprobe events for tracing function entry and exit.
tracing/probes: Avoid setting TPARG_FL_FENTRY and TPARG_FL_RETURN
fprobe: Pass return address to the handlers
|
||
|
Jakub Kicinski
|
449f6bc17a |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR. Conflicts: net/sched/sch_taprio.c |
||
|
Jiri Olsa
|
f46fab0e36 |
bpf: Add extra path pointer check to d_path helper
Anastasios reported crash on stable 5.15 kernel with following
BPF attached to lsm hook:
SEC("lsm.s/bprm_creds_for_exec")
int BPF_PROG(bprm_creds_for_exec, struct linux_binprm *bprm)
{
struct path *path = &bprm->executable->f_path;
char p[128] = { 0 };
bpf_d_path(path, p, 128);
return 0;
}
But bprm->executable can be NULL, so bpf_d_path call will crash:
BUG: kernel NULL pointer dereference, address: 0000000000000018
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC NOPTI
...
RIP: 0010:d_path+0x22/0x280
...
Call Trace:
<TASK>
bpf_d_path+0x21/0x60
bpf_prog_db9cf176e84498d9_bprm_creds_for_exec+0x94/0x99
bpf_trampoline_6442506293_0+0x55/0x1000
bpf_lsm_bprm_creds_for_exec+0x5/0x10
security_bprm_creds_for_exec+0x29/0x40
bprm_execve+0x1c1/0x900
do_execveat_common.isra.0+0x1af/0x260
__x64_sys_execve+0x32/0x40
It's problem for all stable trees with bpf_d_path helper, which was
added in 5.9.
This issue is fixed in current bpf code, where we identify and mark
trusted pointers, so the above code would fail even to load.
For the sake of the stable trees and to workaround potentially broken
verifier in the future, adding the code that reads the path object from
the passed pointer and verifies it's valid in kernel space.
Fixes:
|
||
Masami Hiramatsu (Google)
|
cb16330d12 |
fprobe: Pass return address to the handlers
Pass return address as 'ret_ip' to the fprobe entry and return handlers so that the fprobe user handler can get the reutrn address without analyzing arch-dependent pt_regs. Link: https://lore.kernel.org/all/168507467664.913472.11642316698862778600.stgit@mhiramat.roam.corp.google.com/ Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> |
||
|
Jakub Kicinski
|
a0e35a648f |
bpf-next-for-netdev
-----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZGKqEAAKCRDbK58LschI g6LYAQDp1jAszCOkmJ8VUA0ZyC5NAFDv+7y9Nd1toYWYX1btzAEAkf8+5qBJ1qmI P5M0hjMTbH4MID9Aql10ZbMHheyOBAo= =NUQM -----END PGP SIGNATURE----- Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next Daniel Borkmann says: ==================== pull-request: bpf-next 2023-05-16 We've added 57 non-merge commits during the last 19 day(s) which contain a total of 63 files changed, 3293 insertions(+), 690 deletions(-). The main changes are: 1) Add precision propagation to verifier for subprogs and callbacks, from Andrii Nakryiko. 2) Improve BPF's {g,s}setsockopt() handling with wrong option lengths, from Stanislav Fomichev. 3) Utilize pahole v1.25 for the kernel's BTF generation to filter out inconsistent function prototypes, from Alan Maguire. 4) Various dyn-pointer verifier improvements to relax restrictions, from Daniel Rosenberg. 5) Add a new bpf_task_under_cgroup() kfunc for designated task, from Feng Zhou. 6) Unblock tests for arm64 BPF CI after ftrace supporting direct call, from Florent Revest. 7) Add XDP hint kfunc metadata for RX hash/timestamp for igc, from Jesper Dangaard Brouer. 8) Add several new dyn-pointer kfuncs to ease their usability, from Joanne Koong. 9) Add in-depth LRU internals description and dot function graph, from Joe Stringer. 10) Fix KCSAN report on bpf_lru_list when accessing node->ref, from Martin KaFai Lau. 11) Only dump unprivileged_bpf_disabled log warning upon write, from Kui-Feng Lee. 12) Extend test_progs to directly passing allow/denylist file, from Stephen Veiss. 13) Fix BPF trampoline memleak upon failure attaching to fentry, from Yafang Shao. 14) Fix emitting struct bpf_tcp_sock type in vmlinux BTF, from Yonghong Song. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (57 commits) bpf: Fix memleak due to fentry attach failure bpf: Remove bpf trampoline selector bpf, arm64: Support struct arguments in the BPF trampoline bpftool: JIT limited misreported as negative value on aarch64 bpf: fix calculation of subseq_idx during precision backtracking bpf: Remove anonymous union in bpf_kfunc_call_arg_meta bpf: Document EFAULT changes for sockopt selftests/bpf: Correctly handle optlen > 4096 selftests/bpf: Update EFAULT {g,s}etsockopt selftests bpf: Don't EFAULT for {g,s}setsockopt with wrong optlen libbpf: fix offsetof() and container_of() to work with CO-RE bpf: Address KCSAN report on bpf_lru_list bpf: Add --skip_encoding_btf_inconsistent_proto, --btf_gen_optimized to pahole flags for v1.25 selftests/bpf: Accept mem from dynptr in helper funcs bpf: verifier: Accept dynptr mem as mem in helpers selftests/bpf: Check overflow in optional buffer selftests/bpf: Test allowing NULL buffer in dynptr slice bpf: Allow NULL buffers in bpf_dynptr_slice(_rw) selftests/bpf: Add testcase for bpf_task_under_cgroup bpf: Add bpf_task_under_cgroup() kfunc ... ==================== Link: https://lore.kernel.org/r/20230515225603.27027-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Linus Torvalds
|
d579c468d7 |
tracing updates for 6.4:
- User events are finally ready!
After lots of collaboration between various parties, we finally locked
down on a stable interface for user events that can also work with user
space only tracing. This is implemented by telling the kernel (or user
space library, but that part is user space only and not part of this
patch set), where the variable is that the application uses to know if
something is listening to the trace. There's also an interface to tell
the kernel about these events, which will show up in the
/sys/kernel/tracing/events/user_events/ directory, where it can be
enabled. When it's enabled, the kernel will update the variable, to tell
the application to start writing to the kernel.
See https://lwn.net/Articles/927595/
- Cleaned up the direct trampolines code to simplify arm64 addition of
direct trampolines. Direct trampolines use the ftrace interface but
instead of jumping to the ftrace trampoline, applications (mostly BPF)
can register their own trampoline for performance reasons.
- Some updates to the fprobe infrastructure. fprobes are more efficient than
kprobes, as it does not need to save all the registers that kprobes on
ftrace do. More work needs to be done before the fprobes will be exposed
as dynamic events.
- More updates to references to the obsolete path of
/sys/kernel/debug/tracing for the new /sys/kernel/tracing path.
- Add a seq_buf_do_printk() helper to seq_bufs, to print a large buffer line
by line instead of all at once. There's users in production kernels that
have a large data dump that originally used printk() directly, but the
data dump was larger than what printk() allowed as a single print.
Using seq_buf() to do the printing fixes that.
- Add /sys/kernel/tracing/touched_functions that shows all functions that
was every traced by ftrace or a direct trampoline. This is used for
debugging issues where a traced function could have caused a crash by
a bpf program or live patching.
- Add a "fields" option that is similar to "raw" but outputs the fields of
the events. It's easier to read by humans.
- Some minor fixes and clean ups.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZEr36xQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6quZHAQCzuqnn2S8DsPd3Sy1vKIYaj0uajW5D
Kz1oUJH4F0H7kgEA8XwXkdtfKpOXWc/ZH4LWfL7Orx2wJZJQMV9dVqEPDAE=
=w0Z1
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
- User events are finally ready!
After lots of collaboration between various parties, we finally
locked down on a stable interface for user events that can also work
with user space only tracing.
This is implemented by telling the kernel (or user space library, but
that part is user space only and not part of this patch set), where
the variable is that the application uses to know if something is
listening to the trace.
There's also an interface to tell the kernel about these events,
which will show up in the /sys/kernel/tracing/events/user_events/
directory, where it can be enabled.
When it's enabled, the kernel will update the variable, to tell the
application to start writing to the kernel.
See https://lwn.net/Articles/927595/
- Cleaned up the direct trampolines code to simplify arm64 addition of
direct trampolines.
Direct trampolines use the ftrace interface but instead of jumping to
the ftrace trampoline, applications (mostly BPF) can register their
own trampoline for performance reasons.
- Some updates to the fprobe infrastructure. fprobes are more efficient
than kprobes, as it does not need to save all the registers that
kprobes on ftrace do. More work needs to be done before the fprobes
will be exposed as dynamic events.
- More updates to references to the obsolete path of
/sys/kernel/debug/tracing for the new /sys/kernel/tracing path.
- Add a seq_buf_do_printk() helper to seq_bufs, to print a large buffer
line by line instead of all at once.
There are users in production kernels that have a large data dump
that originally used printk() directly, but the data dump was larger
than what printk() allowed as a single print.
Using seq_buf() to do the printing fixes that.
- Add /sys/kernel/tracing/touched_functions that shows all functions
that was every traced by ftrace or a direct trampoline. This is used
for debugging issues where a traced function could have caused a
crash by a bpf program or live patching.
- Add a "fields" option that is similar to "raw" but outputs the fields
of the events. It's easier to read by humans.
- Some minor fixes and clean ups.
* tag 'trace-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (41 commits)
ring-buffer: Sync IRQ works before buffer destruction
tracing: Add missing spaces in trace_print_hex_seq()
ring-buffer: Ensure proper resetting of atomic variables in ring_buffer_reset_online_cpus
recordmcount: Fix memory leaks in the uwrite function
tracing/user_events: Limit max fault-in attempts
tracing/user_events: Prevent same address and bit per process
tracing/user_events: Ensure bit is cleared on unregister
tracing/user_events: Ensure write index cannot be negative
seq_buf: Add seq_buf_do_printk() helper
tracing: Fix print_fields() for __dyn_loc/__rel_loc
tracing/user_events: Set event filter_type from type
ring-buffer: Clearly check null ptr returned by rb_set_head_page()
tracing: Unbreak user events
tracing/user_events: Use print_format_fields() for trace output
tracing/user_events: Align structs with tabs for readability
tracing/user_events: Limit global user_event count
tracing/user_events: Charge event allocs to cgroups
tracing/user_events: Update documentation for ABI
tracing/user_events: Use write ABI in example
tracing/user_events: Add ABI self-test
...
|
||
Joanne Koong
|
26662d7347 |
bpf: Add bpf_dynptr_size
bpf_dynptr_size returns the number of usable bytes in a dynptr. Signed-off-by: Joanne Koong <joannelkoong@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20230420071414.570108-4-joannelkoong@gmail.com |
||
|
Masami Hiramatsu (Google)
|
39d954200b |
fprobe: Skip exit_handler if entry_handler returns !0
Skip hooking function return and calling exit_handler if the entry_handler() returns !0. Link: https://lkml.kernel.org/r/167526699798.433354.10998365726830117303.stgit@mhiramat.roam.corp.google.com Cc: Florent Revest <revest@chromium.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Masami Hiramatsu (Google)
|
76d0de5729 |
fprobe: Pass entry_data to handlers
Pass the private entry_data to the entry and exit handlers so that they can share the context data, something like saved function arguments etc. User must specify the private entry_data size by @entry_data_size field before registering the fprobe. Link: https://lkml.kernel.org/r/167526696173.433354.17408372048319432574.stgit@mhiramat.roam.corp.google.com Cc: Florent Revest <revest@chromium.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
Tejun Heo
|
c501bf55c8 |
bpf: Make bpf_get_current_[ancestor_]cgroup_id() available for all program types
These helpers are safe to call from any context and there's no reason to
restrict access to them. Remove them from bpf_trace and filter lists and add
to bpf_base_func_proto() under perfmon_capable().
v2: After consulting with Andrii, relocated in bpf_base_func_proto() so that
they require bpf_capable() but not perfomon_capable() as it doesn't read
from or affect others on the system.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/ZAD8QyoszMZiTzBY@slm.duckdns.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
||
|
Linus Torvalds
|
5b7c4cabbb |
Networking changes for 6.3.
Core
----
- Add dedicated kmem_cache for typical/small skb->head, avoid having
to access struct page at kfree time, and improve memory use.
- Introduce sysctl to set default RPS configuration for new netdevs.
- Define Netlink protocol specification format which can be used
to describe messages used by each family and auto-generate parsers.
Add tools for generating kernel data structures and uAPI headers.
- Expose all net/core sysctls inside netns.
- Remove 4s sleep in netpoll if carrier is instantly detected on boot.
- Add configurable limit of MDB entries per port, and port-vlan.
- Continue populating drop reasons throughout the stack.
- Retire a handful of legacy Qdiscs and classifiers.
Protocols
---------
- Support IPv4 big TCP (TSO frames larger than 64kB).
- Add IP_LOCAL_PORT_RANGE socket option, to control local port range
on socket by socket basis.
- Track and report in procfs number of MPTCP sockets used.
- Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP
path manager.
- IPv6: don't check net.ipv6.route.max_size and rely on garbage
collection to free memory (similarly to IPv4).
- Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).
- ICMP: add per-rate limit counters.
- Add support for user scanning requests in ieee802154.
- Remove static WEP support.
- Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
reporting.
- WiFi 7 EHT channel puncturing support (client & AP).
BPF
---
- Add a rbtree data structure following the "next-gen data structure"
precedent set by recently added linked list, that is, by using
kfunc + kptr instead of adding a new BPF map type.
- Expose XDP hints via kfuncs with initial support for RX hash and
timestamp metadata.
- Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key
to better support decap on GRE tunnel devices not operating
in collect metadata.
- Improve x86 JIT's codegen for PROBE_MEM runtime error checks.
- Remove the need for trace_printk_lock for bpf_trace_printk
and bpf_trace_vprintk helpers.
- Extend libbpf's bpf_tracing.h support for tracing arguments of
kprobes/uprobes and syscall as a special case.
- Significantly reduce the search time for module symbols
by livepatch and BPF.
- Enable cpumasks to be used as kptrs, which is useful for tracing
programs tracking which tasks end up running on which CPUs in
different time intervals.
- Add support for BPF trampoline on s390x and riscv64.
- Add capability to export the XDP features supported by the NIC.
- Add __bpf_kfunc tag for marking kernel functions as kfuncs.
- Add cgroup.memory=nobpf kernel parameter option to disable BPF
memory accounting for container environments.
Netfilter
---------
- Remove the CLUSTERIP target. It has been marked as obsolete
for years, and we still have WARN splats wrt. races of
the out-of-band /proc interface installed by this target.
- Add 'destroy' commands to nf_tables. They are identical to
the existing 'delete' commands, but do not return an error if
the referenced object (set, chain, rule...) did not exist.
Driver API
----------
- Improve cpumask_local_spread() locality to help NICs set the right
IRQ affinity on AMD platforms.
- Separate C22 and C45 MDIO bus transactions more clearly.
- Introduce new DCB table to control DSCP rewrite on egress.
- Support configuration of Physical Layer Collision Avoidance (PLCA)
Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
shared medium Ethernet.
- Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
preemption of low priority frames by high priority frames.
- Add support for controlling MACSec offload using netlink SET.
- Rework devlink instance refcounts to allow registration and
de-registration under the instance lock. Split the code into multiple
files, drop some of the unnecessarily granular locks and factor out
common parts of netlink operation handling.
- Add TX frame aggregation parameters (for USB drivers).
- Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
messages with notifications for debug.
- Allow offloading of UDP NEW connections via act_ct.
- Add support for per action HW stats in TC.
- Support hardware miss to TC action (continue processing in SW from
a specific point in the action chain).
- Warn if old Wireless Extension user space interface is used with
modern cfg80211/mac80211 drivers. Do not support Wireless Extensions
for Wi-Fi 7 devices at all. Everyone should switch to using nl80211
interface instead.
- Improve the CAN bit timing configuration. Use extack to return error
messages directly to user space, update the SJW handling, including
the definition of a new default value that will benefit CAN-FD
controllers, by increasing their oscillator tolerance.
New hardware / drivers
----------------------
- Ethernet:
- nVidia BlueField-3 support (control traffic driver)
- Ethernet support for imx93 SoCs
- Motorcomm yt8531 gigabit Ethernet PHY
- onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
- Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
- Amlogic gxl MDIO mux
- WiFi:
- RealTek RTL8188EU (rtl8xxxu)
- Qualcomm Wi-Fi 7 devices (ath12k)
- CAN:
- Renesas R-Car V4H
Drivers
-------
- Bluetooth:
- Set Per Platform Antenna Gain (PPAG) for Intel controllers.
- Ethernet NICs:
- Intel (1G, igc):
- support TSN / Qbv / packet scheduling features of i226 model
- Intel (100G, ice):
- use GNSS subsystem instead of TTY
- multi-buffer XDP support
- extend support for GPIO pins to E823 devices
- nVidia/Mellanox:
- update the shared buffer configuration on PFC commands
- implement PTP adjphase function for HW offset control
- TC support for Geneve and GRE with VF tunnel offload
- more efficient crypto key management method
- multi-port eswitch support
- Netronome/Corigine:
- add DCB IEEE support
- support IPsec offloading for NFP3800
- Freescale/NXP (enetc):
- enetc: support XDP_REDIRECT for XDP non-linear buffers
- enetc: improve reconfig, avoid link flap and waiting for idle
- enetc: support MAC Merge layer
- Other NICs:
- sfc/ef100: add basic devlink support for ef100
- ionic: rx_push mode operation (writing descriptors via MMIO)
- bnxt: use the auxiliary bus abstraction for RDMA
- r8169: disable ASPM and reset bus in case of tx timeout
- cpsw: support QSGMII mode for J721e CPSW9G
- cpts: support pulse-per-second output
- ngbe: add an mdio bus driver
- usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
- r8152: handle devices with FW with NCM support
- amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
- virtio-net: support multi buffer XDP
- virtio/vsock: replace virtio_vsock_pkt with sk_buff
- tsnep: XDP support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add support for latency TLV (in FW control messages)
- Microchip (sparx5):
- separate explicit and implicit traffic forwarding rules, make
the implicit rules always active
- add support for egress DSCP rewrite
- IS0 VCAP support (Ingress Classification)
- IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.)
- ES2 VCAP support (Egress Access Control)
- support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- add MAB (port auth) offload support
- enable PTP receive for mv88e6390
- NXP (ocelot):
- support MAC Merge layer
- support for the the vsc7512 internal copper phys
- Microchip:
- lan9303: convert to PHYLINK
- lan966x: support TC flower filter statistics
- lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
- lan937x: support Credit Based Shaper configuration
- ksz9477: support Energy Efficient Ethernet
- other:
- qca8k: convert to regmap read/write API, use bulk operations
- rswitch: Improve TX timestamp accuracy
- Intel WiFi (iwlwifi):
- EHT (Wi-Fi 7) rate reporting
- STEP equalizer support: transfer some STEP (connection to radio
on platforms with integrated wifi) related parameters from the
BIOS to the firmware.
- Qualcomm 802.11ax WiFi (ath11k):
- IPQ5018 support
- Fine Timing Measurement (FTM) responder role support
- channel 177 support
- MediaTek WiFi (mt76):
- per-PHY LED support
- mt7996: EHT (Wi-Fi 7) support
- Wireless Ethernet Dispatch (WED) reset support
- switch to using page pool allocator
- RealTek WiFi (rtw89):
- support new version of Bluetooth co-existance
- Mobile:
- rmnet: support TX aggregation.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=xXhC
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- Add dedicated kmem_cache for typical/small skb->head, avoid having
to access struct page at kfree time, and improve memory use.
- Introduce sysctl to set default RPS configuration for new netdevs.
- Define Netlink protocol specification format which can be used to
describe messages used by each family and auto-generate parsers.
Add tools for generating kernel data structures and uAPI headers.
- Expose all net/core sysctls inside netns.
- Remove 4s sleep in netpoll if carrier is instantly detected on
boot.
- Add configurable limit of MDB entries per port, and port-vlan.
- Continue populating drop reasons throughout the stack.
- Retire a handful of legacy Qdiscs and classifiers.
Protocols:
- Support IPv4 big TCP (TSO frames larger than 64kB).
- Add IP_LOCAL_PORT_RANGE socket option, to control local port range
on socket by socket basis.
- Track and report in procfs number of MPTCP sockets used.
- Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
manager.
- IPv6: don't check net.ipv6.route.max_size and rely on garbage
collection to free memory (similarly to IPv4).
- Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).
- ICMP: add per-rate limit counters.
- Add support for user scanning requests in ieee802154.
- Remove static WEP support.
- Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
reporting.
- WiFi 7 EHT channel puncturing support (client & AP).
BPF:
- Add a rbtree data structure following the "next-gen data structure"
precedent set by recently added linked list, that is, by using
kfunc + kptr instead of adding a new BPF map type.
- Expose XDP hints via kfuncs with initial support for RX hash and
timestamp metadata.
- Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
better support decap on GRE tunnel devices not operating in collect
metadata.
- Improve x86 JIT's codegen for PROBE_MEM runtime error checks.
- Remove the need for trace_printk_lock for bpf_trace_printk and
bpf_trace_vprintk helpers.
- Extend libbpf's bpf_tracing.h support for tracing arguments of
kprobes/uprobes and syscall as a special case.
- Significantly reduce the search time for module symbols by
livepatch and BPF.
- Enable cpumasks to be used as kptrs, which is useful for tracing
programs tracking which tasks end up running on which CPUs in
different time intervals.
- Add support for BPF trampoline on s390x and riscv64.
- Add capability to export the XDP features supported by the NIC.
- Add __bpf_kfunc tag for marking kernel functions as kfuncs.
- Add cgroup.memory=nobpf kernel parameter option to disable BPF
memory accounting for container environments.
Netfilter:
- Remove the CLUSTERIP target. It has been marked as obsolete for
years, and we still have WARN splats wrt races of the out-of-band
/proc interface installed by this target.
- Add 'destroy' commands to nf_tables. They are identical to the
existing 'delete' commands, but do not return an error if the
referenced object (set, chain, rule...) did not exist.
Driver API:
- Improve cpumask_local_spread() locality to help NICs set the right
IRQ affinity on AMD platforms.
- Separate C22 and C45 MDIO bus transactions more clearly.
- Introduce new DCB table to control DSCP rewrite on egress.
- Support configuration of Physical Layer Collision Avoidance (PLCA)
Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
shared medium Ethernet.
- Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
preemption of low priority frames by high priority frames.
- Add support for controlling MACSec offload using netlink SET.
- Rework devlink instance refcounts to allow registration and
de-registration under the instance lock. Split the code into
multiple files, drop some of the unnecessarily granular locks and
factor out common parts of netlink operation handling.
- Add TX frame aggregation parameters (for USB drivers).
- Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
messages with notifications for debug.
- Allow offloading of UDP NEW connections via act_ct.
- Add support for per action HW stats in TC.
- Support hardware miss to TC action (continue processing in SW from
a specific point in the action chain).
- Warn if old Wireless Extension user space interface is used with
modern cfg80211/mac80211 drivers. Do not support Wireless
Extensions for Wi-Fi 7 devices at all. Everyone should switch to
using nl80211 interface instead.
- Improve the CAN bit timing configuration. Use extack to return
error messages directly to user space, update the SJW handling,
including the definition of a new default value that will benefit
CAN-FD controllers, by increasing their oscillator tolerance.
New hardware / drivers:
- Ethernet:
- nVidia BlueField-3 support (control traffic driver)
- Ethernet support for imx93 SoCs
- Motorcomm yt8531 gigabit Ethernet PHY
- onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
- Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
- Amlogic gxl MDIO mux
- WiFi:
- RealTek RTL8188EU (rtl8xxxu)
- Qualcomm Wi-Fi 7 devices (ath12k)
- CAN:
- Renesas R-Car V4H
Drivers:
- Bluetooth:
- Set Per Platform Antenna Gain (PPAG) for Intel controllers.
- Ethernet NICs:
- Intel (1G, igc):
- support TSN / Qbv / packet scheduling features of i226 model
- Intel (100G, ice):
- use GNSS subsystem instead of TTY
- multi-buffer XDP support
- extend support for GPIO pins to E823 devices
- nVidia/Mellanox:
- update the shared buffer configuration on PFC commands
- implement PTP adjphase function for HW offset control
- TC support for Geneve and GRE with VF tunnel offload
- more efficient crypto key management method
- multi-port eswitch support
- Netronome/Corigine:
- add DCB IEEE support
- support IPsec offloading for NFP3800
- Freescale/NXP (enetc):
- support XDP_REDIRECT for XDP non-linear buffers
- improve reconfig, avoid link flap and waiting for idle
- support MAC Merge layer
- Other NICs:
- sfc/ef100: add basic devlink support for ef100
- ionic: rx_push mode operation (writing descriptors via MMIO)
- bnxt: use the auxiliary bus abstraction for RDMA
- r8169: disable ASPM and reset bus in case of tx timeout
- cpsw: support QSGMII mode for J721e CPSW9G
- cpts: support pulse-per-second output
- ngbe: add an mdio bus driver
- usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
- r8152: handle devices with FW with NCM support
- amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
- virtio-net: support multi buffer XDP
- virtio/vsock: replace virtio_vsock_pkt with sk_buff
- tsnep: XDP support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add support for latency TLV (in FW control messages)
- Microchip (sparx5):
- separate explicit and implicit traffic forwarding rules, make
the implicit rules always active
- add support for egress DSCP rewrite
- IS0 VCAP support (Ingress Classification)
- IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
etc.)
- ES2 VCAP support (Egress Access Control)
- support for Per-Stream Filtering and Policing (802.1Q,
8.6.5.1)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- add MAB (port auth) offload support
- enable PTP receive for mv88e6390
- NXP (ocelot):
- support MAC Merge layer
- support for the the vsc7512 internal copper phys
- Microchip:
- lan9303: convert to PHYLINK
- lan966x: support TC flower filter statistics
- lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
- lan937x: support Credit Based Shaper configuration
- ksz9477: support Energy Efficient Ethernet
- other:
- qca8k: convert to regmap read/write API, use bulk operations
- rswitch: Improve TX timestamp accuracy
- Intel WiFi (iwlwifi):
- EHT (Wi-Fi 7) rate reporting
- STEP equalizer support: transfer some STEP (connection to radio
on platforms with integrated wifi) related parameters from the
BIOS to the firmware.
- Qualcomm 802.11ax WiFi (ath11k):
- IPQ5018 support
- Fine Timing Measurement (FTM) responder role support
- channel 177 support
- MediaTek WiFi (mt76):
- per-PHY LED support
- mt7996: EHT (Wi-Fi 7) support
- Wireless Ethernet Dispatch (WED) reset support
- switch to using page pool allocator
- RealTek WiFi (rtw89):
- support new version of Bluetooth co-existance
- Mobile:
- rmnet: support TX aggregation"
* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
page_pool: add a comment explaining the fragment counter usage
net: ethtool: fix __ethtool_dev_mm_supported() implementation
ethtool: pse-pd: Fix double word in comments
xsk: add linux/vmalloc.h to xsk.c
sefltests: netdevsim: wait for devlink instance after netns removal
selftest: fib_tests: Always cleanup before exit
net/mlx5e: Align IPsec ASO result memory to be as required by hardware
net/mlx5e: TC, Set CT miss to the specific ct action instance
net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
net/mlx5: Refactor tc miss handling to a single function
net/mlx5: Kconfig: Make tc offload depend on tc skb extension
net/sched: flower: Support hardware miss to tc action
net/sched: flower: Move filter handle initialization earlier
net/sched: cls_api: Support hardware miss to tc action
net/sched: Rename user cookie and act cookie
sfc: fix builds without CONFIG_RTC_LIB
sfc: clean up some inconsistent indentings
net/mlx4_en: Introduce flexible array to silence overflow warning
net: lan966x: Fix possible deadlock inside PTP
net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
...
|
||
|
Linus Torvalds
|
a2f0e7eee1 |
The latest perf updates in this cycle are:
- Optimize perf_sample_data layout
- Prepare sample data handling for BPF integration
- Update the x86 PMU driver for Intel Meteor Lake
- Restructure the x86 uncore code to fix a SPR (Sapphire Rapids)
discovery breakage
- Fix the x86 Zhaoxin PMU driver
- Cleanups
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=ztUT
-----END PGP SIGNATURE-----
Merge tag 'perf-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Ingo Molnar:
- Optimize perf_sample_data layout
- Prepare sample data handling for BPF integration
- Update the x86 PMU driver for Intel Meteor Lake
- Restructure the x86 uncore code to fix a SPR (Sapphire Rapids)
discovery breakage
- Fix the x86 Zhaoxin PMU driver
- Cleanups
* tag 'perf-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits)
perf/x86/intel/uncore: Add Meteor Lake support
x86/perf/zhaoxin: Add stepping check for ZXC
perf/x86/intel/ds: Fix the conversion from TSC to perf time
perf/x86/uncore: Don't WARN_ON_ONCE() for a broken discovery table
perf/x86/uncore: Add a quirk for UPI on SPR
perf/x86/uncore: Ignore broken units in discovery table
perf/x86/uncore: Fix potential NULL pointer in uncore_get_alias_name
perf/x86/uncore: Factor out uncore_device_to_die()
perf/core: Call perf_prepare_sample() before running BPF
perf/core: Introduce perf_prepare_header()
perf/core: Do not pass header for sample ID init
perf/core: Set data->sample_flags in perf_prepare_sample()
perf/core: Add perf_sample_save_brstack() helper
perf/core: Add perf_sample_save_raw_data() helper
perf/core: Add perf_sample_save_callchain() helper
perf/core: Save the dynamic parts of sample data size
x86/kprobes: Use switch-case for 0xFF opcodes in prepare_emulation
perf/core: Change the layout of perf_sample_data
perf/x86/msr: Add Meteor Lake support
perf/x86/cstate: Add Meteor Lake support
...
|
||
|
Jakub Kicinski
|
de42873367 |
bpf-next-for-netdev
-----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCY+bZrwAKCRDbK58LschI gzi4AP4+TYo0jnSwwkrOoN9l4f5VO9X8osmj3CXfHBv7BGWVxAD/WnvA3TDZyaUd agIZTkRs6BHF9He8oROypARZxTeMLwM= =nO1C -----END PGP SIGNATURE----- Daniel Borkmann says: ==================== pull-request: bpf-next 2023-02-11 We've added 96 non-merge commits during the last 14 day(s) which contain a total of 152 files changed, 4884 insertions(+), 962 deletions(-). There is a minor conflict in drivers/net/ethernet/intel/ice/ice_main.c between commit |
||
|
Jakub Kicinski
|
82b4a9412b |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
net/core/gro.c |
||
David Vernet
|
400031e05a |
bpf: Add __bpf_kfunc tag to all kfuncs
Now that we have the __bpf_kfunc tag, we should use add it to all existing kfuncs to ensure that they'll never be elided in LTO builds. Signed-off-by: David Vernet <void@manifault.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Stanislav Fomichev <sdf@google.com> Link: https://lore.kernel.org/bpf/20230201173016.342758-4-void@manifault.com |
||
|
Jakub Kicinski
|
2d104c390f |
bpf-next-for-netdev
-----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCY9RqJgAKCRDbK58LschI gw2IAP9G5uhFO5abBzYLupp6SY3T5j97MUvPwLfFqUEt7EXmuwEA2lCUEWeW0KtR QX+QmzCa6iHxrW7WzP4DUYLue//FJQY= =yYqA -----END PGP SIGNATURE----- Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next Daniel Borkmann says: ==================== bpf-next 2023-01-28 We've added 124 non-merge commits during the last 22 day(s) which contain a total of 124 files changed, 6386 insertions(+), 1827 deletions(-). The main changes are: 1) Implement XDP hints via kfuncs with initial support for RX hash and timestamp metadata kfuncs, from Stanislav Fomichev and Toke Høiland-Jørgensen. Measurements on overhead: https://lore.kernel.org/bpf/875yellcx6.fsf@toke.dk 2) Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case, from Andrii Nakryiko. 3) Significantly reduce the search time for module symbols by livepatch and BPF, from Jiri Olsa and Zhen Lei. 4) Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals, from David Vernet. 5) Fix several issues in the dynptr processing such as stack slot liveness propagation, missing checks for PTR_TO_STACK variable offset, etc, from Kumar Kartikeya Dwivedi. 6) Various performance improvements, fixes, and introduction of more than just one XDP program to XSK selftests, from Magnus Karlsson. 7) Big batch to BPF samples to reduce deprecated functionality, from Daniel T. Lee. 8) Enable struct_ops programs to be sleepable in verifier, from David Vernet. 9) Reduce pr_warn() noise on BTF mismatches when they are expected under the CONFIG_MODULE_ALLOW_BTF_MISMATCH config anyway, from Connor O'Brien. 10) Describe modulo and division by zero behavior of the BPF runtime in BPF's instruction specification document, from Dave Thaler. 11) Several improvements to libbpf API documentation in libbpf.h, from Grant Seltzer. 12) Improve resolve_btfids header dependencies related to subcmd and add proper support for HOSTCC, from Ian Rogers. 13) Add ipip6 and ip6ip decapsulation support for bpf_skb_adjust_room() helper along with BPF selftests, from Ziyang Xuan. 14) Simplify the parsing logic of structure parameters for BPF trampoline in the x86-64 JIT compiler, from Pu Lehui. 15) Get BTF working for kernels with CONFIG_RUST enabled by excluding Rust compilation units with pahole, from Martin Rodriguez Reboredo. 16) Get bpf_setsockopt() working for kTLS on top of TCP sockets, from Kui-Feng Lee. 17) Disable stack protection for BPF objects in bpftool given BPF backends don't support it, from Holger Hoffstätte. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (124 commits) selftest/bpf: Make crashes more debuggable in test_progs libbpf: Add documentation to map pinning API functions libbpf: Fix malformed documentation formatting selftests/bpf: Properly enable hwtstamp in xdp_hw_metadata selftests/bpf: Calls bpf_setsockopt() on a ktls enabled socket. bpf: Check the protocol of a sock to agree the calls to bpf_setsockopt(). bpf/selftests: Verify struct_ops prog sleepable behavior bpf: Pass const struct bpf_prog * to .check_member libbpf: Support sleepable struct_ops.s section bpf: Allow BPF_PROG_TYPE_STRUCT_OPS programs to be sleepable selftests/bpf: Fix vmtest static compilation error tools/resolve_btfids: Alter how HOSTCC is forced tools/resolve_btfids: Install subcmd headers bpf/docs: Document the nocast aliasing behavior of ___init bpf/docs: Document how nested trusted fields may be defined bpf/docs: Document cpumask kfuncs in a new file selftests/bpf: Add selftest suite for cpumask kfuncs selftests/bpf: Add nested trust selftests suite bpf: Enable cpumasks to be queried and used as kptrs bpf: Disallow NULLable pointers for trusted kfuncs ... ==================== Link: https://lore.kernel.org/r/20230128004827.21371-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Jakub Kicinski
|
b3c588cd55 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
drivers/net/ipa/ipa_interrupt.c drivers/net/ipa/ipa_interrupt.h |
||
|
Jiri Olsa
|
6a5f2d6ee8 |
bpf: Change modules resolving for kprobe multi link
We currently use module_kallsyms_on_each_symbol that iterates all
modules/symbols and we try to lookup each such address in user
provided symbols/addresses to get list of used modules.
This fix instead only iterates provided kprobe addresses and calls
__module_address on each to get list of used modules. This turned
out to be simpler and also bit faster.
On my setup with workload (executed 10 times):
# test_progs -t kprobe_multi_bench_attach/modules
Current code:
Performance counter stats for './test.sh' (5 runs):
76,081,161,596 cycles:k ( +- 0.47% )
18.3867 +- 0.0992 seconds time elapsed ( +- 0.54% )
With the fix:
Performance counter stats for './test.sh' (5 runs):
74,079,889,063 cycles:k ( +- 0.04% )
17.8514 +- 0.0218 seconds time elapsed ( +- 0.12% )
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230116101009.23694-4-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
||
Zhen Lei
|
07cc2c931e |
livepatch: Improve the search performance of module_kallsyms_on_each_symbol()
Currently we traverse all symbols of all modules to find the specified
function for the specified module. But in reality, we just need to find
the given module and then traverse all the symbols in it.
Let's add a new parameter 'const char *modname' to function
module_kallsyms_on_each_symbol(), then we can compare the module names
directly in this function and call hook 'fn' after matching. If 'modname'
is NULL, the symbols of all modules are still traversed for compatibility
with other usage cases.
Phase1: mod1-->mod2..(subsequent modules do not need to be compared)
|
Phase2: -->f1-->f2-->f3
Assuming that there are m modules, each module has n symbols on average,
then the time complexity is reduced from O(m * n) to O(m) + O(n).
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20230116101009.23694-2-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
||
Yonghong Song
|
bdb7fdb0ac |
bpf: Fix a possible task gone issue with bpf_send_signal[_thread]() helpers
In current bpf_send_signal() and bpf_send_signal_thread() helper
implementation, irq_work is used to handle nmi context. Hao Sun
reported in [1] that the current task at the entry of the helper
might be gone during irq_work callback processing. To fix the issue,
a reference is acquired for the current task before enqueuing into
the irq_work so that the queued task is still available during
irq_work callback processing.
[1] https://lore.kernel.org/bpf/20230109074425.12556-1-sunhao.th@gmail.com/
Fixes:
|
||
Namhyung Kim
|
0a9081cf0a |
perf/core: Add perf_sample_save_raw_data() helper
When we save the raw_data to the perf sample data, we need to update the sample flags and the dynamic size. To make sure this is done consistently, add the perf_sample_save_raw_data() helper and convert all call sites. Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Tested-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20230118060559.615653-4-namhyung@kernel.org |
||
Hao Sun
|
a3d81bc1ea |
bpf: Skip task with pid=1 in send_signal_common()
The following kernel panic can be triggered when a task with pid=1 attaches a prog that attempts to send killing signal to itself, also see [1] for more details: Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b CPU: 3 PID: 1 Comm: systemd Not tainted 6.1.0-09652-g59fe41b5255f #148 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x100/0x178 lib/dump_stack.c:106 panic+0x2c4/0x60f kernel/panic.c:275 do_exit.cold+0x63/0xe4 kernel/exit.c:789 do_group_exit+0xd4/0x2a0 kernel/exit.c:950 get_signal+0x2460/0x2600 kernel/signal.c:2858 arch_do_signal_or_restart+0x78/0x5d0 arch/x86/kernel/signal.c:306 exit_to_user_mode_loop kernel/entry/common.c:168 [inline] exit_to_user_mode_prepare+0x15f/0x250 kernel/entry/common.c:203 __syscall_exit_to_user_mode_work kernel/entry/common.c:285 [inline] syscall_exit_to_user_mode+0x1d/0x50 kernel/entry/common.c:296 do_syscall_64+0x44/0xb0 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x63/0xcd So skip task with pid=1 in bpf_send_signal_common() to avoid the panic. [1] https://lore.kernel.org/bpf/20221222043507.33037-1-sunhao.th@gmail.com Signed-off-by: Hao Sun <sunhao.th@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Stanislav Fomichev <sdf@google.com> Link: https://lore.kernel.org/bpf/20230106084838.12690-1-sunhao.th@gmail.com |
||
|
Jiri Olsa
|
e2bb9e01d5 |
bpf: Remove trace_printk_lock
Both bpf_trace_printk and bpf_trace_vprintk helpers use static buffer guarded with trace_printk_lock spin lock. The spin lock contention causes issues with bpf programs attached to contention_begin tracepoint [1][2]. Andrii suggested we could get rid of the contention by using trylock, but we could actually get rid of the spinlock completely by using percpu buffers the same way as for bin_args in bpf_bprintf_prepare function. Adding new return 'buf' argument to struct bpf_bprintf_data and making bpf_bprintf_prepare to return also the buffer for printk helpers. [1] https://lore.kernel.org/bpf/CACkBjsakT_yWxnSWr4r-0TpPvbKm9-OBmVUhJb7hV3hY8fdCkw@mail.gmail.com/ [2] https://lore.kernel.org/bpf/CACkBjsaCsTovQHFfkqJKto6S4Z8d02ud1D7MPESrHa1cVNNTrw@mail.gmail.com/ Reported-by: Hao Sun <sunhao.th@gmail.com> Suggested-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20221215214430.1336195-4-jolsa@kernel.org |
||
|
Jiri Olsa
|
f19a405045 |
bpf: Do cleanup in bpf_bprintf_cleanup only when needed
Currently we always cleanup/decrement bpf_bprintf_nest_level variable
in bpf_bprintf_cleanup if it's > 0.
There's possible scenario where this could cause a problem, when
bpf_bprintf_prepare does not get bin_args buffer (because num_args is 0)
and following bpf_bprintf_cleanup call decrements bpf_bprintf_nest_level
variable, like:
in task context:
bpf_bprintf_prepare(num_args != 0) increments 'bpf_bprintf_nest_level = 1'
-> first irq :
bpf_bprintf_prepare(num_args == 0)
bpf_bprintf_cleanup decrements 'bpf_bprintf_nest_level = 0'
-> second irq:
bpf_bprintf_prepare(num_args != 0) bpf_bprintf_nest_level = 1
gets same buffer as task context above
Adding check to bpf_bprintf_cleanup and doing the real cleanup only if we
got bin_args data in the first place.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20221215214430.1336195-3-jolsa@kernel.org
|
||
|
Jiri Olsa
|
78aa1cc940 |
bpf: Add struct for bin_args arg in bpf_bprintf_prepare
Adding struct bpf_bprintf_data to hold bin_args argument for bpf_bprintf_prepare function. We will add another return argument to bpf_bprintf_prepare and pass the struct to bpf_bprintf_cleanup for proper cleanup in following changes. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20221215214430.1336195-2-jolsa@kernel.org |
||
|
Yonghong Song
|
01685c5bdd |
bpf: Introduce might_sleep field in bpf_func_proto
Introduce bpf_func_proto->might_sleep to indicate a particular helper might sleep. This will make later check whether a helper might be sleepable or not easier. Acked-by: Martin KaFai Lau <martin.lau@kernel.org> Signed-off-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/r/20221124053211.2373553-1-yhs@fb.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
David Vernet
|
3f00c52393 |
bpf: Allow trusted pointers to be passed to KF_TRUSTED_ARGS kfuncs
Kfuncs currently support specifying the KF_TRUSTED_ARGS flag to signal
to the verifier that it should enforce that a BPF program passes it a
"safe", trusted pointer. Currently, "safe" means that the pointer is
either PTR_TO_CTX, or is refcounted. There may be cases, however, where
the kernel passes a BPF program a safe / trusted pointer to an object
that the BPF program wishes to use as a kptr, but because the object
does not yet have a ref_obj_id from the perspective of the verifier, the
program would be unable to pass it to a KF_ACQUIRE | KF_TRUSTED_ARGS
kfunc.
The solution is to expand the set of pointers that are considered
trusted according to KF_TRUSTED_ARGS, so that programs can invoke kfuncs
with these pointers without getting rejected by the verifier.
There is already a PTR_UNTRUSTED flag that is set in some scenarios,
such as when a BPF program reads a kptr directly from a map
without performing a bpf_kptr_xchg() call. These pointers of course can
and should be rejected by the verifier. Unfortunately, however,
PTR_UNTRUSTED does not cover all the cases for safety that need to
be addressed to adequately protect kfuncs. Specifically, pointers
obtained by a BPF program "walking" a struct are _not_ considered
PTR_UNTRUSTED according to BPF. For example, say that we were to add a
kfunc called bpf_task_acquire(), with KF_ACQUIRE | KF_TRUSTED_ARGS, to
acquire a struct task_struct *. If we only used PTR_UNTRUSTED to signal
that a task was unsafe to pass to a kfunc, the verifier would mistakenly
allow the following unsafe BPF program to be loaded:
SEC("tp_btf/task_newtask")
int BPF_PROG(unsafe_acquire_task,
struct task_struct *task,
u64 clone_flags)
{
struct task_struct *acquired, *nested;
nested = task->last_wakee;
/* Would not be rejected by the verifier. */
acquired = bpf_task_acquire(nested);
if (!acquired)
return 0;
bpf_task_release(acquired);
return 0;
}
To address this, this patch defines a new type flag called PTR_TRUSTED
which tracks whether a PTR_TO_BTF_ID pointer is safe to pass to a
KF_TRUSTED_ARGS kfunc or a BPF helper function. PTR_TRUSTED pointers are
passed directly from the kernel as a tracepoint or struct_ops callback
argument. Any nested pointer that is obtained from walking a PTR_TRUSTED
pointer is no longer PTR_TRUSTED. From the example above, the struct
task_struct *task argument is PTR_TRUSTED, but the 'nested' pointer
obtained from 'task->last_wakee' is not PTR_TRUSTED.
A subsequent patch will add kfuncs for storing a task kfunc as a kptr,
and then another patch will add selftests to validate.
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20221120051004.3605026-3-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
||
|
Jakub Kicinski
|
b54a0d4094 |
bpf-next-for-netdev
-----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCY2GuKgAKCRDbK58LschI gy32AP9PI0e/bUGDExKJ8g97PeeEtnpj4TTI6g+XKILtYnyXlgD/Rk4j2D/f3IBF Ha9TmqYvAUim+U/g50vUrNuoNLNJ5w8= =OKC1 -----END PGP SIGNATURE----- Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next Daniel Borkmann says: ==================== bpf-next 2022-11-02 We've added 70 non-merge commits during the last 14 day(s) which contain a total of 96 files changed, 3203 insertions(+), 640 deletions(-). The main changes are: 1) Make cgroup local storage available to non-cgroup attached BPF programs such as tc BPF ones, from Yonghong Song. 2) Avoid unnecessary deadlock detection and failures wrt BPF task storage helpers, from Martin KaFai Lau. 3) Add LLVM disassembler as default library for dumping JITed code in bpftool, from Quentin Monnet. 4) Various kprobe_multi_link fixes related to kernel modules, from Jiri Olsa. 5) Optimize x86-64 JIT with emitting BMI2-based shift instructions, from Jie Meng. 6) Improve BPF verifier's memory type compatibility for map key/value arguments, from Dave Marchevsky. 7) Only create mmap-able data section maps in libbpf when data is exposed via skeletons, from Andrii Nakryiko. 8) Add an autoattach option for bpftool to load all object assets, from Wang Yufen. 9) Various memory handling fixes for libbpf and BPF selftests, from Xu Kuohai. 10) Initial support for BPF selftest's vmtest.sh on arm64, from Manu Bretelle. 11) Improve libbpf's BTF handling to dedup identical structs, from Alan Maguire. 12) Add BPF CI and denylist documentation for BPF selftests, from Daniel Müller. 13) Check BPF cpumap max_entries before doing allocation work, from Florian Lehner. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (70 commits) samples/bpf: Fix typo in README bpf: Remove the obsolte u64_stats_fetch_*_irq() users. bpf: check max_entries before allocating memory bpf: Fix a typo in comment for DFS algorithm bpftool: Fix spelling mistake "disasembler" -> "disassembler" selftests/bpf: Fix bpftool synctypes checking failure selftests/bpf: Panic on hard/soft lockup docs/bpf: Add documentation for new cgroup local storage selftests/bpf: Add test cgrp_local_storage to DENYLIST.s390x selftests/bpf: Add selftests for new cgroup local storage selftests/bpf: Fix test test_libbpf_str/bpf_map_type_str bpftool: Support new cgroup local storage libbpf: Support new cgroup local storage bpf: Implement cgroup storage available to non-cgroup-attached bpf progs bpf: Refactor some inode/task/sk storage functions for reuse bpf: Make struct cgroup btf id global selftests/bpf: Tracing prog can still do lookup under busy lock selftests/bpf: Ensure no task storage failure for bpf_lsm.s prog due to deadlock detection bpf: Add new bpf_task_storage_delete proto with no deadlock detection bpf: bpf_task_storage_delete_recur does lookup first before the deadlock check ... ==================== Link: https://lore.kernel.org/r/20221102062120.5724-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Yonghong Song
|
c4bcfb38a9 |
bpf: Implement cgroup storage available to non-cgroup-attached bpf progs
Similar to sk/inode/task storage, implement similar cgroup local storage.
There already exists a local storage implementation for cgroup-attached
bpf programs. See map type BPF_MAP_TYPE_CGROUP_STORAGE and helper
bpf_get_local_storage(). But there are use cases such that non-cgroup
attached bpf progs wants to access cgroup local storage data. For example,
tc egress prog has access to sk and cgroup. It is possible to use
sk local storage to emulate cgroup local storage by storing data in socket.
But this is a waste as it could be lots of sockets belonging to a particular
cgroup. Alternatively, a separate map can be created with cgroup id as the key.
But this will introduce additional overhead to manipulate the new map.
A cgroup local storage, similar to existing sk/inode/task storage,
should help for this use case.
The life-cycle of storage is managed with the life-cycle of the
cgroup struct. i.e. the storage is destroyed along with the owning cgroup
with a call to bpf_cgrp_storage_free() when cgroup itself
is deleted.
The userspace map operations can be done by using a cgroup fd as a key
passed to the lookup, update and delete operations.
Typically, the following code is used to get the current cgroup:
struct task_struct *task = bpf_get_current_task_btf();
... task->cgroups->dfl_cgrp ...
and in structure task_struct definition:
struct task_struct {
....
struct css_set __rcu *cgroups;
....
}
With sleepable program, accessing task->cgroups is not protected by rcu_read_lock.
So the current implementation only supports non-sleepable program and supporting
sleepable program will be the next step together with adding rcu_read_lock
protection for rcu tagged structures.
Since map name BPF_MAP_TYPE_CGROUP_STORAGE has been used for old cgroup local
storage support, the new map name BPF_MAP_TYPE_CGRP_STORAGE is used
for cgroup storage available to non-cgroup-attached bpf programs. The old
cgroup storage supports bpf_get_local_storage() helper to get the cgroup data.
The new cgroup storage helper bpf_cgrp_storage_get() can provide similar
functionality. While old cgroup storage pre-allocates storage memory, the new
mechanism can also pre-allocate with a user space bpf_map_update_elem() call
to avoid potential run-time memory allocation failure.
Therefore, the new cgroup storage can provide all functionality w.r.t.
the old one. So in uapi bpf.h, the old BPF_MAP_TYPE_CGROUP_STORAGE is alias to
BPF_MAP_TYPE_CGROUP_STORAGE_DEPRECATED to indicate the old cgroup storage can
be deprecated since the new one can provide the same functionality.
Acked-by: David Vernet <void@manifault.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20221026042850.673791-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|