It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties.
Convert reading boolean properties to to of_property_read_bool().
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230310144702.1541660-1-robh@kernel.org
Clean-up commit b6999fa1c847 ("clocksource/drivers/timer-ti-dm: Use
of_address_to_resource()") caused a regression where pa is never set
making all related SoCs fail to boot. Let's fix this by setting pa
if found.
Fixes: b6999fa1c847 ("clocksource/drivers/timer-ti-dm: Use of_address_to_resource()")
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230412064142.12726-1-tony@atomide.com
Smatch reports:
drivers/clocksource/timer-davinci.c:332 davinci_timer_register()
warn: 'base' from ioremap() not released on lines: 274.
Fix this and other potential memory leak problems
by adding a set of corresponding exit lables.
Fixes: 721154f972 ("clocksource/drivers/davinci: Add support for clockevents")
Signed-off-by: Qinrun Dai <flno@hust.edu.cn>
Link: https://lore.kernel.org/r/20230413135037.1505799-1-flno@hust.edu.cn
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The driver can match only via the DT table so the table should be always
used and the of_match_ptr does not have any sense (this also allows ACPI
matching via PRP0001, even though it might not be relevant here).
drivers/clocksource/timer-stm32-lp.c:203:34: error: ‘stm32_clkevent_lp_of_match’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230311173803.263446-1-krzysztof.kozlowski@linaro.org
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230313075430.2730803-6-u.kleine-koenig@pengutronix.de
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230313075430.2730803-5-u.kleine-koenig@pengutronix.de
If a platform driver's remove callback returns an error code, the driver
core emits a generic (and thus little helpful) error message.
Instead emit a more specifc error message about the actual error and
return zero to suppress the core's message.
Note that returning zero has no side effects apart from not emitting
said error message. This prepares converting platform driver's remove
message to return void.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230313075430.2730803-4-u.kleine-koenig@pengutronix.de
The comment in the remove callback suggests that the driver is not
supposed to be unbound. However returning an error code in the remove
callback doesn't accomplish that. Instead set the suppress_bind_attrs
property (which makes it impossible to unbind the driver via sysfs).
The only remaining way to unbind an stm32-lp device would be module
unloading, but that doesn't apply here, as the driver cannot be built as
a module.
Also drop the useless remove callback.
[dlezcano] : Fixed up the wrong function removed
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230313075430.2730803-3-u.kleine-koenig@pengutronix.de
The comment in the remove callback suggests that the driver is not
supposed to be unbound. However returning an error code in the remove
callback doesn't accomplish that. Instead set the suppress_bind_attrs
property (which makes it impossible to unbind the driver via sysfs).
The only remaining way to unbind a sh_tmu2 device would be module
unloading, but that doesn't apply here, as the driver cannot be built as
a module.
Also drop the useless remove callback.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230313075430.2730803-2-u.kleine-koenig@pengutronix.de
Replace of_get_address() and of_translate_address() calls with single
call to of_address_to_resource().
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230319163220.226273-1-robh@kernel.org
mxc_timer_init() was originally only used by non-DT i.MX platforms.
i.MX has already been converted to be a DT-only platform.
Remove the unused mxc_timer_init() function.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230307124313.708255-1-festevam@denx.de
On MediaTek platforms, CPUXGPT is the source for the AArch64 System
Timer, read through CNTVCT_EL0.
The handling for starting this timer ASAP was introduced in commit
327e93cf9a ("clocksource/drivers/timer-mediatek: Implement CPUXGPT timers")
which description also contains an important full explanation of the
reasons why this driver is necessary and cannot be a module.
In preparation for an eventual conversion of timer-mediatek to a
platform_driver that would be possibly built as a module, split out
the CPUXGPT timers driver to a new timer-mediatek-cpux.c driver.
This commit brings no functional changes.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Walter Chang <walter.chang@mediatek.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230309103913.116775-1-angelogioacchino.delregno@collabora.com
For a shared timers, the mct_init_dt() should not initialize the clock
even with global comparator. This is not an error, thus the function
should simply return 0, not 'ret'.
This also fixes smatch warning:
drivers/clocksource/exynos_mct.c:635 mct_init_dt() warn: missing error code? 'ret'
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/202304021446.46XVKag0-lkp@intel.com/
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230403094017.9556-1-krzysztof.kozlowski@linaro.org
For some unknown reason the introduction of the timer_wait_running callback
missed to fixup posix CPU timers, which went unnoticed for almost four years.
Marco reported recently that the WARN_ON() in timer_wait_running()
triggers with a posix CPU timer test case.
Posix CPU timers have two execution models for expiring timers depending on
CONFIG_POSIX_CPU_TIMERS_TASK_WORK:
1) If not enabled, the expiry happens in hard interrupt context so
spin waiting on the remote CPU is reasonably time bound.
Implement an empty stub function for that case.
2) If enabled, the expiry happens in task work before returning to user
space or guest mode. The expired timers are marked as firing and moved
from the timer queue to a local list head with sighand lock held. Once
the timers are moved, sighand lock is dropped and the expiry happens in
fully preemptible context. That means the expiring task can be scheduled
out, migrated, interrupted etc. So spin waiting on it is more than
suboptimal.
The timer wheel has a timer_wait_running() mechanism for RT, which uses
a per CPU timer-base expiry lock which is held by the expiry code and the
task waiting for the timer function to complete blocks on that lock.
This does not work in the same way for posix CPU timers as there is no
timer base and expiry for process wide timers can run on any task
belonging to that process, but the concept of waiting on an expiry lock
can be used too in a slightly different way:
- Add a mutex to struct posix_cputimers_work. This struct is per task
and used to schedule the expiry task work from the timer interrupt.
- Add a task_struct pointer to struct cpu_timer which is used to store
a the task which runs the expiry. That's filled in when the task
moves the expired timers to the local expiry list. That's not
affecting the size of the k_itimer union as there are bigger union
members already
- Let the task take the expiry mutex around the expiry function
- Let the waiter acquire a task reference with rcu_read_lock() held and
block on the expiry mutex
This avoids spin-waiting on a task which might not even be on a CPU and
works nicely for RT too.
Fixes: ec8f954a40 ("posix-timers: Use a callback for cancel synchronization on PREEMPT_RT")
Reported-by: Marco Elver <elver@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Marco Elver <elver@google.com>
Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/87zg764ojw.ffs@tglx
The first field of /proc/uptime relies on the CLOCK_BOOTTIME clock which
can also be fetched from clock_gettime() API.
Improve the test coverage while verifying the monotonicity of
CLOCK_BOOTTIME accross both interfaces.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230222144649.624380-9-frederic@kernel.org
Due to broken iowait task counting design (cf: comments above
get_cpu_idle_time_us() and nr_iowait()), it is not possible to provide
the guarantee that /proc/stat or /proc/uptime display monotonic idle
time values.
Remove the assertions that verify the related wrong assumption so that
testers and maintainers don't spend more time on that.
Reported-by: Yu Liao <liaoyu15@huawei.com>
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230222144649.624380-8-frederic@kernel.org
There is no need for the __tick_nohz_idle_stop_tick() function between
tick_nohz_idle_stop_tick() and its implementation. Remove that
unnecessary step.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230222144649.624380-6-frederic@kernel.org
The per-cpu iowait task counter is incremented locally upon sleeping.
But since the task can be woken to (and by) another CPU, the counter may
then be decremented remotely. This is the source of a race involving
readers VS writer of idle/iowait sleeptime.
The following scenario shows an example where a /proc/stat reader
observes a pending sleep time as IO whereas that pending sleep time
later eventually gets accounted as non-IO.
CPU 0 CPU 1 CPU 2
----- ----- ------
//io_schedule() TASK A
current->in_iowait = 1
rq(0)->nr_iowait++
//switch to idle
// READ /proc/stat
// See nr_iowait_cpu(0) == 1
return ts->iowait_sleeptime +
ktime_sub(ktime_get(), ts->idle_entrytime)
//try_to_wake_up(TASK A)
rq(0)->nr_iowait--
//idle exit
// See nr_iowait_cpu(0) == 0
ts->idle_sleeptime += ktime_sub(ktime_get(), ts->idle_entrytime)
As a result subsequent reads on /proc/stat may expose backward progress.
This is unfortunately hardly fixable. Just add a comment about that
condition.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230222144649.624380-5-frederic@kernel.org
Reading idle/IO sleep time (eg: from /proc/stat) can race with idle exit
updates because the state machine handling the stats is not atomic and
requires a coherent read batch.
As a result reading the sleep time may report irrelevant or backward
values.
Fix this with protecting the simple state machine within a seqcount.
This is expected to be cheap enough not to add measurable performance
impact on the idle path.
Note this only fixes reader VS writer condition partitially. A race
remains that involves remote updates of the CPU iowait task counter. It
can hardly be fixed.
Reported-by: Yu Liao <liaoyu15@huawei.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230222144649.624380-4-frederic@kernel.org
The idle and IO sleeptime statistics appearing in /proc/stat can be
currently updated from two sites: locally on idle exit and remotely
by cpufreq. However there is no synchronization mechanism protecting
concurrent updates. It is therefore possible to account the sleeptime
twice, among all the other possible broken scenarios.
To prevent from breaking the sleeptime accounting source, restrict the
sleeptime updates to the local idle exit site. If there is a delta to
add since the last update, IO/Idle sleep time readers will now only
compute the delta without actually writing it back to the internal idle
statistic fields.
This fixes a writer VS writer race. Note there are still two known
reader VS writer races to handle. A subsequent patch will fix one.
Reported-by: Yu Liao <liaoyu15@huawei.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230222144649.624380-3-frederic@kernel.org
Restructure and group fields by access in order to optimize cache
layout. While at it, also add missing kernel doc for two fields:
@last_jiffies and @idle_expires.
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230222144649.624380-2-frederic@kernel.org
With HIGHRES enabled tick_sched_timer() is programmed every jiffy to
expire the timer_list timers. This timer is programmed accurate in
respect to CLOCK_MONOTONIC so that 0 seconds and nanoseconds is the
first tick and the next one is 1000/CONFIG_HZ ms later. For HZ=250 it is
every 4 ms and so based on the current time the next tick can be
computed.
This accuracy broke since the commit mentioned below because the jiffy
based clocksource is initialized with higher accuracy in
read_persistent_wall_and_boot_offset(). This higher accuracy is
inherited during the setup in tick_setup_device(). The timer still fires
every 4ms with HZ=250 but timer is no longer aligned with
CLOCK_MONOTONIC with 0 as it origin but has an offset in the us/ns part
of the timestamp. The offset differs with every boot and makes it
impossible for user land to align with the tick.
Align the tick period with CLOCK_MONOTONIC ensuring that it is always a
multiple of 1000/CONFIG_HZ ms.
Fixes: 857baa87b6 ("sched/clock: Enable sched clock early")
Reported-by: Gusenleitner Klaus <gus@keba.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/20230406095735.0_14edn3@linutronix.de
Link: https://lore.kernel.org/r/20230418122639.ikgfvu3f@linutronix.de
Test that POSIX timers using CLOCK_PROCESS_CPUTIME_ID eventually deliver
a signal to all running threads. This effectively tests that the kernel
doesn't prefer any one thread (or subset of threads) for signal delivery.
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230316123028.2890338-2-elver@google.com
POSIX timers using the CLOCK_PROCESS_CPUTIME_ID clock prefer the main
thread of a thread group for signal delivery. However, this has a
significant downside: it requires waking up a potentially idle thread.
Instead, prefer to deliver signals to the current thread (in the same
thread group) if SIGEV_THREAD_ID is not set by the user. This does not
change guaranteed semantics, since POSIX process CPU time timers have
never guaranteed that signal delivery is to a specific thread (without
SIGEV_THREAD_ID set).
The effect is that queueing the signal no longer wakes up potentially idle
threads, and the kernel is no longer biased towards delivering the timer
signal to any particular thread (which better distributes the timer signals
esp. when multiple timers fire concurrently).
Suggested-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230316123028.2890338-1-elver@google.com
The actual intention is that no dynamic relocation exists in the VDSO. For
this the VDSO build validates that the resulting .so file does not have any
relocations which are specified via $(ARCH_REL_TYPE_ABS) per architecture,
which is fragile as e.g. ARM64 lacks an entry for R_AARCH64_RELATIVE. Aside
of that ARCH_REL_TYPE_ABS is a misnomer as it checks for relative
relocations too.
However, some GNU ld ports produce unneeded R_*_NONE relocation entries. If
a port fails to determine the exact .rel[a].dyn size, the trailing zeros
become R_*_NONE relocations. E.g. ld's powerpc port recently fixed
https://sourceware.org/bugzilla/show_bug.cgi?id=29540). R_*_NONE are
generally a no-op in the dynamic loaders. So just ignore them.
Remove the ARCH_REL_TYPE_ABS defines and just validate that the resulting
.so file does not contain any R_* relocation entries except R_*_NONE.
Signed-off-by: Fangrui Song <maskray@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> # for aarch64
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com> # for vDSO, aarch64
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Link: https://lore.kernel.org/r/20230310190750.3323802-1-maskray@google.com
- Fix setting affinity of hwlat threads in containers
Using sched_set_affinity() has unwanted side effects when being
called within a container. Use set_cpus_allowed_ptr() instead.
- Fix per cpu thread management of the hwlat tracer
* Do not start per_cpu threads if one is already running for the CPU.
* When starting per_cpu threads, do not clear the kthread variable
as it may already be set to running per cpu threads
- Fix return value for test_gen_kprobe_cmd()
On error the return value was overwritten by being set to
the result of the call from kprobe_event_delete(), which would
likely succeed, and thus have the function return success.
- Fix splice() reads from the trace file that was broken by
36e2c7421f ("fs: don't allow splice read/write without explicit ops")
- Remove obsolete and confusing comment in ring_buffer.c
The original design of the ring buffer used struct page flags
for tricks to optimize, which was shortly removed due to them
being tricks. But a comment for those tricks remained.
- Set local functions and variables to static
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZBdIkBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qti2AP49s1GM8teFgDF/CO3oa45BoYq1lMJO
1Z+x+mS/bdUAZgEAw+3KGo8oZDuvWu/nr04JPeoy0GL1/JnbQ6JNCCjzhQc=
=Yk66
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix setting affinity of hwlat threads in containers
Using sched_set_affinity() has unwanted side effects when being
called within a container. Use set_cpus_allowed_ptr() instead
- Fix per cpu thread management of the hwlat tracer:
- Do not start per_cpu threads if one is already running for the CPU
- When starting per_cpu threads, do not clear the kthread variable
as it may already be set to running per cpu threads
- Fix return value for test_gen_kprobe_cmd()
On error the return value was overwritten by being set to the result
of the call from kprobe_event_delete(), which would likely succeed,
and thus have the function return success
- Fix splice() reads from the trace file that was broken by commit
36e2c7421f ("fs: don't allow splice read/write without explicit
ops")
- Remove obsolete and confusing comment in ring_buffer.c
The original design of the ring buffer used struct page flags for
tricks to optimize, which was shortly removed due to them being
tricks. But a comment for those tricks remained
- Set local functions and variables to static
* tag 'trace-v6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/hwlat: Replace sched_setaffinity with set_cpus_allowed_ptr
ring-buffer: remove obsolete comment for free_buffer_page()
tracing: Make splice_read available again
ftrace: Set direct_ops storage-class-specifier to static
trace/hwlat: Do not start per-cpu thread if it is already running
trace/hwlat: Do not wipe the contents of per-cpu thread data
tracing/osnoise: set several trace_osnoise.c variables storage-class-specifier to static
tracing: Fix wrong return in kprobe_event_gen_test.c
There is a problem with the behavior of hwlat in a container,
resulting in incorrect output. A warning message is generated:
"cpumask changed while in round-robin mode, switching to mode none",
and the tracing_cpumask is ignored. This issue arises because
the kernel thread, hwlatd, is not a part of the container, and
the function sched_setaffinity is unable to locate it using its PID.
Additionally, the task_struct of hwlatd is already known.
Ultimately, the function set_cpus_allowed_ptr achieves
the same outcome as sched_setaffinity, but employs task_struct
instead of PID.
Test case:
# cd /sys/kernel/tracing
# echo 0 > tracing_on
# echo round-robin > hwlat_detector/mode
# echo hwlat > current_tracer
# unshare --fork --pid bash -c 'echo 1 > tracing_on'
# dmesg -c
Actual behavior:
[573502.809060] hwlat_detector: cpumask changed while in round-robin mode, switching to mode none
Link: https://lore.kernel.org/linux-trace-kernel/20230316144535.1004952-1-costa.shul@redhat.com
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Fixes: 0330f7aa8e ("tracing: Have hwlat trace migrate across tracing_cpumask CPUs")
Signed-off-by: Costa Shulyupin <costa.shul@redhat.com>
Acked-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The comment refers to mm/slob.c which is being removed. It comes from
commit ed56829cb3 ("ring_buffer: reset buffer page when freeing") and
according to Steven the borrowed code was a page mapcount and mapping
reset, which was later removed by commit e4c2ce82ca ("ring_buffer:
allocate buffer page pointer"). Thus the comment is not accurate anyway,
remove it.
Link: https://lore.kernel.org/linux-trace-kernel/20230315142446.27040-1-vbabka@suse.cz
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Reported-by: Mike Rapoport <mike.rapoport@gmail.com>
Suggested-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Fixes: e4c2ce82ca ("ring_buffer: allocate buffer page pointer")
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Since the commit 36e2c7421f ("fs: don't allow splice read/write
without explicit ops") is applied to the kernel, splice() and
sendfile() calls on the trace file (/sys/kernel/debug/tracing
/trace) return EINVAL.
This patch restores these system calls by initializing splice_read
in file_operations of the trace file. This patch only enables such
functionalities for the read case.
Link: https://lore.kernel.org/linux-trace-kernel/20230314013707.28814-1-sfoon.kim@samsung.com
Cc: stable@vger.kernel.org
Fixes: 36e2c7421f ("fs: don't allow splice read/write without explicit ops")
Signed-off-by: Sung-hun Kim <sfoon.kim@samsung.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Here are some small tty and serial driver fixes for 6.3-rc3 to resolve
some reported issues.
They include:
- 8250 driver Kconfig issue pointed out by you that showed up in -rc1
- qcom-geni serial driver fixes
- various 8250 driver fixes for reported problems
- fsl_lpuart driver fixes
- serdev fix for regression in -rc1
- vt.c bugfix
All have been in linux-next for over a week with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZBcinQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynIYACgjP49Xy1N6hDLZJgKxvnPLmvnhY4AoKM8CkHI
zbWudA1fBqsYLFtxNKaQ
=/Ond
-----END PGP SIGNATURE-----
Merge tag 'tty-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are some small tty and serial driver fixes for 6.3-rc3 to resolve
some reported issues.
They include:
- 8250 driver Kconfig issue pointed out by you that showed up in -rc1
- qcom-geni serial driver fixes
- various 8250 driver fixes for reported problems
- fsl_lpuart driver fixes
- serdev fix for regression in -rc1
- vt.c bugfix
All have been in linux-next for over a week with no reported problems"
* tag 'tty-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: vt: protect KD_FONT_OP_GET_TALL from unbound access
serial: qcom-geni: drop bogus uart_write_wakeup()
serial: qcom-geni: fix mapping of empty DMA buffer
serial: qcom-geni: fix DMA mapping leak on shutdown
serial: qcom-geni: fix console shutdown hang
serdev: Set fwnode for serdev devices
tty: serial: fsl_lpuart: fix race on RX DMA shutdown
serial: 8250_pci1xxxx: Disable SERIAL_8250_PCI1XXXX config by default
serial: 8250_fsl: fix handle_irq locking
serial: 8250_em: Fix UART port type
serial: 8250: ASPEED_VUART: select REGMAP instead of depending on it
tty: serial: fsl_lpuart: skip waiting for transmission complete when UARTCTRL_SBK is asserted
Revert "tty: serial: fsl_lpuart: adjust SERIAL_FSL_LPUART_CONSOLE config dependency"
Here are a few small char/misc/other driver subsystem patches to resolve
reported problems for 6.3-rc3.
Included in here are:
- Interconnect driver fixes for reported problems
- Memory driver fixes for reported problems.
- nvmem core fix
- firmware driver fix for reported problem.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZBchKw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylYVQCfbQtOMjbfxCNvmBCZbC8GWaanLloAn243V7vJ
oxfPCUa6+BYLFWweKydG
=tuC/
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are a few small char/misc/other driver subsystem patches to
resolve reported problems for 6.3-rc3.
Included in here are:
- Interconnect driver fixes for reported problems
- Memory driver fixes for reported problems
- nvmem core fix
- firmware driver fix for reported problem
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (23 commits)
memory: tegra30-emc: fix interconnect registration race
memory: tegra20-emc: fix interconnect registration race
memory: tegra124-emc: fix interconnect registration race
memory: tegra: fix interconnect registration race
interconnect: exynos: drop redundant link destroy
interconnect: exynos: fix registration race
interconnect: exynos: fix node leak in probe PM QoS error path
interconnect: qcom: msm8974: fix registration race
interconnect: qcom: rpmh: fix registration race
interconnect: qcom: rpmh: fix probe child-node error handling
interconnect: qcom: rpm: fix registration race
nvmem: core: return -ENOENT if nvmem cell is not found
firmware: xilinx: don't make a sleepable memory allocation from an atomic context
interconnect: qcom: rpm: fix probe child-node error handling
interconnect: qcom: osm-l3: fix registration race
interconnect: imx: fix registration race
interconnect: fix provider registration API
interconnect: fix icc_provider_del() error handling
interconnect: fix mem leak when freeing nodes
interconnect: qcom: qcm2290: Fix MASTER_SNOC_BIMC_NRT
...
changes over sysfs have been done instead of waiting until something
else triggers the workqueue later - another error or the polling
interval cycle is reached
-----BEGIN PGP SIGNATURE-----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=Q6Dq
-----END PGP SIGNATURE-----
Merge tag 'ras_urgent_for_v6.3_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RAS fix from Borislav Petkov:
- Flush out logged errors immediately after MCA banks configuration
changes over sysfs have been done instead of waiting until something
else triggers the workqueue later - another error or the polling
interval cycle is reached
* tag 'ras_urgent_for_v6.3_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Make sure logged MCEs are processed after sysfs update
to groups
- Update the proper event time tracking variable depending on the
event type
- Fix a memory overwrite issue due to using the wrong function argument
when outputting perf events
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmQXBiQACgkQEsHwGGHe
VUrTHg//dTd+7Oo1vao32lZCkVW0bBvx3KzoyAcvEPh7Yu3Cw+tZkfI8lWY8dgU3
lgecN1pUa9IiZNULFbulXqRumcq3HIRKCp/RejEmR3W30KCwxnEAwGdakkCPEcMS
2vXl4SZn7rU8avKJBd/ZUUS5lDWz6YHPNbLX3iamFH+7oN56Vf2LFJuuO0WtZSgr
Sqv25oaV1ZZjeEAI5KrPM04hcldj4BXGPoIPvP30/c3z6aPnwt6v5H2gw5IUJNHl
Qm0ycgW7An6iNR4bFpm/NP9cSAI7FgmAB3VuhQAExl6NroUxE8R+HEO04PsJAOgd
BpNB1eXIjrTgw8r+TsDq4Z9VY8fgMtHbwutAp348XwF6//5F/WOzojwSGAAX7LCx
5+fK4eA4gLkQJmuyI5/3fNCC0EnUTsK/YCC5eFyas8KFERTmmq8hafCBQO4W9VPr
8A7TD2X6fWNWvS/UF1RqVv/gCa0ub7ifz+eOx42/vK2PXn4vsjMv0JtwnARj8PzZ
Ymo/3ArmBWhuP+94FdVP4AduBuEdHvWO7EZG5buRdOo//sb2MwX05zufowLvR9YQ
E+VkZxf0RFPaDQdPnoS/SwFE206ii2Z5MtgsQX7XpoBo06R5AzZQlhlMl/StFvN0
65ut1dWwqrVG0uSN0GOzTIZl5x5YZASm5I49ItZsnZyoMPTwDOc=
=l7PF
-----END PGP SIGNATURE-----
Merge tag 'perf_urgent_for_v6.3_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- Check whether sibling events have been deactivated before adding them
to groups
- Update the proper event time tracking variable depending on the event
type
- Fix a memory overwrite issue due to using the wrong function argument
when outputting perf events
* tag 'perf_urgent_for_v6.3_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Fix check before add_event_to_groups() in perf_group_detach()
perf: fix perf_event_context->time
perf/core: Fix perf_output_begin parameter is incorrectly invoked in perf_event_bpf_output
- Clear temporary storage in the resctrl code to prevent access to an
unexistent MSR
- Add a simple throttling mechanism to protect the hypervisor from potentially
malicious SEV guests issuing requests in rapid succession.
In order to not jeopardize the sanity of everyone involved in
maintaining this code, the request issuing side has received
a cleanup, split in more or less trivial, small and digestible pieces.
Otherwise, the code was threatening to become an unmaintainable mess.
Therefore, that cleanup is marked indirectly also for stable so that
there's no differences between the upstream code and the stable
variant when it comes down to backporting more there.
-----BEGIN PGP SIGNATURE-----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=6UGz
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v6.3_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
"There's a little bit more 'movement' in there for my taste but it
needs to happen and should make the code better after it.
- Check cmdline_find_option()'s return value before further
processing
- Clear temporary storage in the resctrl code to prevent access to an
unexistent MSR
- Add a simple throttling mechanism to protect the hypervisor from
potentially malicious SEV guests issuing requests in rapid
succession.
In order to not jeopardize the sanity of everyone involved in
maintaining this code, the request issuing side has received a
cleanup, split in more or less trivial, small and digestible
pieces. Otherwise, the code was threatening to become an
unmaintainable mess.
Therefore, that cleanup is marked indirectly also for stable so
that there's no differences between the upstream code and the
stable variant when it comes down to backporting more there"
* tag 'x86_urgent_for_v6.3_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Fix use of uninitialized buffer in sme_enable()
x86/resctrl: Clear staged_config[] before and after it is used
virt/coco/sev-guest: Add throttling awareness
virt/coco/sev-guest: Convert the sw_exit_info_2 checking to a switch-case
virt/coco/sev-guest: Do some code style cleanups
virt/coco/sev-guest: Carve out the request issuing logic into a helper
virt/coco/sev-guest: Remove the disable_vmpck label in handle_guest_request()
virt/coco/sev-guest: Simplify extended guest request handling
virt/coco/sev-guest: Check SEV_SNP attribute at probe time
syzkaller.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmQWfYcACgkQ8vlZVpUN
gaNvhAgAqIv3PLgt3SJIC/klXmEsXJn2q1EqAUKk6XHAzppHoUMrnsJJ2Sz+u4NT
eKx7FGz+dIzJK8lLoX+XNnLgdkkJwklD8jIxAjbnkgHaGJbjdLH3Su4elQvGwLla
CprPysjMtgny4rogLwz2D+At3w8o7/JACbzlh0QNhaZ5IIP4Kj5QutgyftF1m4Qa
AfC9KcpJ+poTQTI4m4oOrJCrH6kwJdVItuS5/mk54DTChNNYtJJy2M6eho7IQ9iG
ENBnt06/uWhdHQz4OYmYn3x1iXYOAdAmeVGtREKqOstUd31VO2TCC2lE+7tSnO2d
177m3jfTHdv5znU+LfyrS1Y1u1nGBA==
=AXq7
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus_urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fix from Ted Ts'o:
"Fix a double unlock bug on an error path in ext4, found by smatch and
syzkaller"
* tag 'ext4_for_linus_urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix possible double unlock when moving a directory
smatch reports this warning
kernel/trace/ftrace.c:2594:19: warning:
symbol 'direct_ops' was not declared. Should it be static?
The variable direct_ops is only used in ftrace.c, so it should be static
Link: https://lore.kernel.org/linux-trace-kernel/20230311135113.711824-1-trix@redhat.com
Signed-off-by: Tom Rix <trix@redhat.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The hwlatd tracer will end up starting multiple per-cpu threads with
the following script:
#!/bin/sh
cd /sys/kernel/debug/tracing
echo 0 > tracing_on
echo hwlat > current_tracer
echo per-cpu > hwlat_detector/mode
echo 100000 > hwlat_detector/width
echo 200000 > hwlat_detector/window
echo 1 > tracing_on
To fix the issue, check if the hwlatd thread for the cpu is already
running, before starting a new one. Along with the previous patch, this
avoids running multiple instances of the same CPU thread on the system.
Link: https://lore.kernel.org/all/20230302113654.2984709-1-tero.kristo@linux.intel.com/
Link: https://lkml.kernel.org/r/20230310100451.3948583-3-tero.kristo@linux.intel.com
Cc: stable@vger.kernel.org
Fixes: f46b16520a ("trace/hwlat: Implement the per-cpu mode")
Signed-off-by: Tero Kristo <tero.kristo@linux.intel.com>
Acked-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
smatch reports several similar warnings
kernel/trace/trace_osnoise.c:220:1: warning:
symbol '__pcpu_scope_per_cpu_osnoise_var' was not declared. Should it be static?
kernel/trace/trace_osnoise.c:243:1: warning:
symbol '__pcpu_scope_per_cpu_timerlat_var' was not declared. Should it be static?
kernel/trace/trace_osnoise.c:335:14: warning:
symbol 'interface_lock' was not declared. Should it be static?
kernel/trace/trace_osnoise.c:2242:5: warning:
symbol 'timerlat_min_period' was not declared. Should it be static?
kernel/trace/trace_osnoise.c:2243:5: warning:
symbol 'timerlat_max_period' was not declared. Should it be static?
These variables are only used in trace_osnoise.c, so it should be static
Link: https://lore.kernel.org/linux-trace-kernel/20230309150414.4036764-1-trix@redhat.com
Signed-off-by: Tom Rix <trix@redhat.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Overwriting the error code with the deletion result may cause the
function to return 0 despite encountering an error. Commit b111545d26
("tracing: Remove the useless value assignment in
test_create_synth_event()") solves a similar issue by
returning the original error code, so this patch does the same.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Link: https://lore.kernel.org/linux-trace-kernel/20230131075818.5322-1-aagusev@ispras.ru
Signed-off-by: Anton Gusev <aagusev@ispras.ru>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
- Drop omap1 osk driver
- Various potential divide by zero pixclock fixes
- Add pixelclock and fb_check_var() to stifb
- Code style cleanups and indenting fixes
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZBYgxAAKCRD3ErUQojoP
X4uPAP9KRUOxwf8/crLyx6wLWkVkJKPGkBswrHZnupYzVZCIoAEA5CceT9kThBSc
a8kESgGyQQy7i9wKABu5679s3/xMmgY=
=LFFJ
-----END PGP SIGNATURE-----
Merge tag 'fbdev-for-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev fixes from Helge Deller:
"The majority of lines changed is due to a code style cleanup in the
pnmtologo helper program.
Arnd removed the omap1 osk driver and the SIS fb driver is now
orphaned.
Other than that it's the usual bunch of small fixes and cleanups, e.g.
prevent possible divide-by-zero in various fb drivers if the pixclock
is zero and various conversions to devm_platform*() and of_property*()
functions:
- Drop omap1 osk driver
- Various potential divide by zero pixclock fixes
- Add pixelclock and fb_check_var() to stifb
- Code style cleanups and indenting fixes"
* tag 'fbdev-for-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: Use of_property_present() for testing DT property presence
fbdev: au1200fb: Fix potential divide by zero
fbdev: lxfb: Fix potential divide by zero
fbdev: intelfb: Fix potential divide by zero
fbdev: nvidia: Fix potential divide by zero
fbdev: stifb: Provide valid pixelclock and add fb_check_var() checks
fbdev: omapfb: remove omap1 osk driver
fbdev: xilinxfb: Use devm_platform_get_and_ioremap_resource()
fbdev: wm8505fb: Use devm_platform_ioremap_resource()
fbdev: pxa3xx-gcu: Use devm_platform_get_and_ioremap_resource()
fbdev: Use of_property_read_bool() for boolean properties
fbdev: clps711x-fb: Use devm_platform_get_and_ioremap_resource()
fbdev: tgafb: Fix potential divide by zero
MAINTAINERS: orphan SIS FRAMEBUFFER DRIVER
fbdev: omapfb: cleanup inconsistent indentation
drivers: video: logo: add SPDX comment, remove GPL notice in pnmtologo.c
drivers: video: logo: fix code style issues in pnmtologo.c
- Exclude kallsyms_seqs_of_names from kallsyms to fix build error
- Fix 'make kernelrelease' for external module builds
- Get the Debian source package compilable again
- Fix the wrong uname when Debian packages are built with the
KDEB_PKGVERSION option
- Fix superfluous CROSS_COMPILE when building Debian packages
- Fix RPM package build error when KCONFIG_CONFIG is set
- Use 'git archive' for creating source tarballs
- Remove the scripts/list-gitignored tool
-----BEGIN PGP SIGNATURE-----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=kdAo
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Exclude kallsyms_seqs_of_names from kallsyms to fix build error
- Fix 'make kernelrelease' for external module builds
- Get the Debian source package compilable again
- Fix the wrong uname when Debian packages are built with the
KDEB_PKGVERSION option
- Fix superfluous CROSS_COMPILE when building Debian packages
- Fix RPM package build error when KCONFIG_CONFIG is set
- Use 'git archive' for creating source tarballs
- Remove the scripts/list-gitignored tool
* tag 'kbuild-fixes-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: use git-archive for source package creation
kbuild: rpm-pkg: move source components to rpmbuild/SOURCES
kbuild: deb-pkg: use dh_listpackages to know enabled packages
kbuild: deb-pkg: split image and debug objects staging out into functions
kbuild: deb-pkg: set CROSS_COMPILE only when undefined
kbuild: deb-pkg: do not take KERNELRELEASE from the source version
kbuild: deb-pkg: make debian source package working again
Makefile: Make kernelrelease target work with M=
kconfig: Update config changed flag before calling callback
kallsyms: add kallsyms_seqs_of_names to list of special symbols
- ltc2992, adm1266: Set missing can_sleep flag
- tmp512/tmp513: Drop of_match_ptr for ID table to fix build with !CONFIG_OF
- ucd90320: Fix back-to-back access problem
- ina3221: Fix bad error return from probe function
- xgene: Fix use-after-free bug in remove function
- adt7475: Fix hysteresis register bit masks, and fix association
of 'smoothing' attributes
-----BEGIN PGP SIGNATURE-----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=JwY7
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-v6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- ltc2992, adm1266: Set missing can_sleep flag
- tmp512/tmp513: Drop of_match_ptr for ID table to fix build with
!CONFIG_OF
- ucd90320: Fix back-to-back access problem
- ina3221: Fix bad error return from probe function
- xgene: Fix use-after-free bug in remove function
- adt7475: Fix hysteresis register bit masks, and fix association of
'smoothing' attributes
* tag 'hwmon-for-v6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (ltc2992) Set `can_sleep` flag for GPIO chip
hwmon: (adm1266) Set `can_sleep` flag for GPIO chip
hwmon: tmp512: drop of_match_ptr for ID table
hwmon: (ucd90320) Add minimum delay between bus accesses
hwmon: (ina3221) return prober error code
hwmon: (xgene) Fix use after free bug in xgene_hwmon_remove due to race condition
hwmon: (adt7475) Fix masking of hysteresis registers
hwmon: (adt7475) Display smoothing attributes in correct order
* Two fixes from Ondrej for the pata_parport driver to address an issue
with error handling during drive connection and to fix memory leaks
in case of errors during initialization and when disconnecting a
device.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCZBTvPgAKCRDdoc3SxdoY
dgScAP4tCDQonDbpHt6XLqdxeqFKtQefmXe2lI0T7QvTWeW6SAEAqO76nmp1BjN+
5eYkwMwSMR6rd9+vjVhwL88mZQL0nAI=
=iCl0
-----END PGP SIGNATURE-----
Merge tag 'ata-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ata fixes from Damien Le Moal:
- Two fixes from Ondrej for the pata_parport driver to address an issue
with error handling during drive connection and to fix memory leaks
in case of errors during initialization and when disconnecting a
device.
* tag 'ata-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: pata_parport: fix memory leaks
ata: pata_parport: fix parport release without claim
The __find_restype() function loops over the m5mols_default_ffmt[]
array, and the termination condition ends up being wrong: instead of
stopping when the iterator becomes the size of the array it traverses,
it stops after it has already overshot the array.
Now, in practice this doesn't likely matter, because the code will
always find the entry it looks for, and will thus return early and never
hit that last extra iteration.
But it turns out that clang will unroll the loop fully, because it has
only two iterations (well, three due to the off-by-one bug), and then
clang will end up just giving up in the middle of the loop unrolling
when it notices that the code walks past the end of the array.
And that made 'objtool' very unhappy indeed, because the generated code
just falls off the edge of the universe, and ends up falling through to
the next function, causing this warning:
drivers/media/i2c/m5mols/m5mols.o: warning: objtool: m5mols_set_fmt() falls through to next function m5mols_get_frame_desc()
Fix the loop ending condition.
Reported-by: Jens Axboe <axboe@kernel.dk>
Analyzed-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Analyzed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/linux-block/CAHk-=wgTSdKYbmB1JYM5vmHMcD9J9UZr0mn7BOYM_LudrP+Xvw@mail.gmail.com/
Fixes: bc125106f8 ("[media] Add support for M-5MOLS 8 Mega Pixel camera ISP")
Cc: HeungJun, Kim <riverful.kim@samsung.com>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Current release - regressions:
- phy: mscc: fix deadlock in phy_ethtool_{get,set}_wol()
- virtio: vsock: don't use skbuff state to account credit
- virtio: vsock: don't drop skbuff on copy failure
- virtio_net: fix page_to_skb() miscalculating the memory size
Current release - new code bugs:
- eth: correct xdp_features after device reconfig
- wifi: nl80211: fix the puncturing bitmap policy
- net/mlx5e: flower:
- fix raw counter initialization
- fix missing error code
- fix cloned flow attribute
- ipa:
- fix some register validity checks
- fix a surprising number of bad offsets
- kill FILT_ROUT_CACHE_CFG IPA register
Previous releases - regressions:
- tcp: fix bind() conflict check for dual-stack wildcard address
- veth: fix use after free in XDP_REDIRECT when skb headroom is small
- ipv4: fix incorrect table ID in IOCTL path
- ipvlan: make skb->skb_iif track skb->dev for l3s mode
- mptcp:
- fix possible deadlock in subflow_error_report
- fix UaFs when destroying unaccepted and listening sockets
- dsa: mv88e6xxx: fix max_mtu of 1492 on 6165, 6191, 6220, 6250, 6290
Previous releases - always broken:
- tcp: tcp_make_synack() can be called from process context,
don't assume preemption is disabled when updating stats
- netfilter: correct length for loading protocol registers
- virtio_net: add checking sq is full inside xdp xmit
- bonding: restore IFF_MASTER/SLAVE flags on bond enslave
Ethertype change
- phy: nxp-c45-tja11xx: fix MII_BASIC_CONFIG_REV bit number
- eth: i40e: fix crash during reboot when adapter is in recovery mode
- eth: ice: avoid deadlock on rtnl lock when auxiliary device
plug/unplug meets bonding
- dsa: mt7530:
- remove now incorrect comment regarding port 5
- set PLL frequency and trgmii only when trgmii is used
- eth: mtk_eth_soc: reset PCS state when changing interface types
Misc:
- ynl: another license adjustment
- move the TCA_EXT_WARN_MSG attribute for tc action
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=5/YI
-----END PGP SIGNATURE-----
Merge tag 'net-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, wifi and ipsec.
A little more changes than usual, but it's pretty normal for us that
the rc3/rc4 PRs are oversized as people start testing in earnest.
Possibly an extra boost from people deploying the 6.1 LTS but that's
more of an unscientific hunch.
Current release - regressions:
- phy: mscc: fix deadlock in phy_ethtool_{get,set}_wol()
- virtio: vsock: don't use skbuff state to account credit
- virtio: vsock: don't drop skbuff on copy failure
- virtio_net: fix page_to_skb() miscalculating the memory size
Current release - new code bugs:
- eth: correct xdp_features after device reconfig
- wifi: nl80211: fix the puncturing bitmap policy
- net/mlx5e: flower:
- fix raw counter initialization
- fix missing error code
- fix cloned flow attribute
- ipa:
- fix some register validity checks
- fix a surprising number of bad offsets
- kill FILT_ROUT_CACHE_CFG IPA register
Previous releases - regressions:
- tcp: fix bind() conflict check for dual-stack wildcard address
- veth: fix use after free in XDP_REDIRECT when skb headroom is small
- ipv4: fix incorrect table ID in IOCTL path
- ipvlan: make skb->skb_iif track skb->dev for l3s mode
- mptcp:
- fix possible deadlock in subflow_error_report
- fix UaFs when destroying unaccepted and listening sockets
- dsa: mv88e6xxx: fix max_mtu of 1492 on 6165, 6191, 6220, 6250, 6290
Previous releases - always broken:
- tcp: tcp_make_synack() can be called from process context, don't
assume preemption is disabled when updating stats
- netfilter: correct length for loading protocol registers
- virtio_net: add checking sq is full inside xdp xmit
- bonding: restore IFF_MASTER/SLAVE flags on bond enslave Ethertype
change
- phy: nxp-c45-tja11xx: fix MII_BASIC_CONFIG_REV bit number
- eth: i40e: fix crash during reboot when adapter is in recovery mode
- eth: ice: avoid deadlock on rtnl lock when auxiliary device
plug/unplug meets bonding
- dsa: mt7530:
- remove now incorrect comment regarding port 5
- set PLL frequency and trgmii only when trgmii is used
- eth: mtk_eth_soc: reset PCS state when changing interface types
Misc:
- ynl: another license adjustment
- move the TCA_EXT_WARN_MSG attribute for tc action"
* tag 'net-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (108 commits)
selftests: bonding: add tests for ether type changes
bonding: restore bond's IFF_SLAVE flag if a non-eth dev enslave fails
bonding: restore IFF_MASTER/SLAVE flags on bond enslave ether type change
net: renesas: rswitch: Fix GWTSDIE register handling
net: renesas: rswitch: Fix the output value of quote from rswitch_rx()
ethernet: sun: add check for the mdesc_grab()
net: ipa: fix some register validity checks
net: ipa: kill FILT_ROUT_CACHE_CFG IPA register
net: ipa: add two missing declarations
net: ipa: reg: include <linux/bug.h>
net: xdp: don't call notifiers during driver init
net/sched: act_api: add specific EXT_WARN_MSG for tc action
Revert "net/sched: act_api: move TCA_EXT_WARN_MSG to the correct hierarchy"
net: dsa: microchip: fix RGMII delay configuration on KSZ8765/KSZ8794/KSZ8795
ynl: make the tooling check the license
ynl: broaden the license even more
tools: ynl: make definitions optional again
hsr: ratelimit only when errors are printed
qed/qed_mng_tlv: correctly zero out ->min instead of ->hour
selftests: net: devlink_port_split.py: skip test if no suitable device available
...
-----BEGIN PGP SIGNATURE-----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=qTVU
-----END PGP SIGNATURE-----
Merge tag 'block-6.3-2023-03-16' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
"A bit bigger than usual, as the NVMe pull request missed last weeks
submission. In detail:
- NVMe pull request via Christoph:
- Avoid potential UAF in nvmet_req_complete (Damien Le Moal)
- More quirks (Elmer Miroslav Mosher Golovin, Philipp Geulen)
- Fix a memory leak in the nvme-pci probe teardown path
(Irvin Cote)
- Repair the MAINTAINERS entry (Lukas Bulwahn)
- Fix handling single range discard request (Ming Lei)
- Show more opcode names in trace events (Minwoo Im)
- Fix nvme-tcp timeout reporting (Sagi Grimberg)
- MD pull request via Song:
- Two fixes for old issues (Neil)
- Resource leak in device stopping (Xiao)
- Bio based device stats fix (Yu)
- Kill unused CONFIG_BLOCK_COMPAT (Lukas)
- sunvdc missing mdesc_grab() failure check (Liang)
- Fix for reversal of request ordering upon issue for certain cases
(Jan)
- null_blk timeout fixes (Damien)
- Loop use-after-free fix (Bart)
- blk-mq SRCU fix for BLK_MQ_F_BLOCKING devices (Chris)"
* tag 'block-6.3-2023-03-16' of git://git.kernel.dk/linux:
block: remove obsolete config BLOCK_COMPAT
md: select BLOCK_LEGACY_AUTOLOAD
block: count 'ios' and 'sectors' when io is done for bio-based device
block: sunvdc: add check for mdesc_grab() returning NULL
nvmet: avoid potential UAF in nvmet_req_complete()
nvme-trace: show more opcode names
nvme-tcp: add nvme-tcp pdu size build protection
nvme-tcp: fix opcode reporting in the timeout handler
nvme-pci: add NVME_QUIRK_BOGUS_NID for Lexar NM620
nvme-pci: add NVME_QUIRK_BOGUS_NID for Netac NV3000
nvme-pci: fixing memory leak in probe teardown path
nvme: fix handling single range discard request
MAINTAINERS: repair malformed T: entries in NVM EXPRESS DRIVERS
block: null_blk: cleanup null_queue_rq()
block: null_blk: Fix handling of fake timeout request
blk-mq: fix "bad unlock balance detected" on q->srcu in __blk_mq_run_dispatch_ops
loop: Fix use-after-free issues
block: do not reverse request order when flushing plug list
md: avoid signed overflow in slot_store()
md: Free resources in __md_stop
