Here is the big set of TTY/Serial driver updates and cleanups for
6.9-rc1. Included in here are:
- more tty cleanups from Jiri
- loads of 8250 driver cleanups from Andy
- max310x driver updates
- samsung serial driver updates
- uart_prepare_sysrq_char() updates for many drivers
- platform driver remove callback void cleanups
- stm32 driver updates
- other small tty/serial driver updates
All of these have been in linux-next for a long time with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZfwqow8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynNegCffxTbsnbMGjWhVrQ326IJx/DFvNMAoI9csigv
m+G3RzefzZLRx8nAma0c
=GMfc
-----END PGP SIGNATURE-----
Merge tag 'tty-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial driver updates from Greg KH:
"Here is the big set of TTY/Serial driver updates and cleanups for
6.9-rc1. Included in here are:
- more tty cleanups from Jiri
- loads of 8250 driver cleanups from Andy
- max310x driver updates
- samsung serial driver updates
- uart_prepare_sysrq_char() updates for many drivers
- platform driver remove callback void cleanups
- stm32 driver updates
- other small tty/serial driver updates
All of these have been in linux-next for a long time with no reported
issues"
* tag 'tty-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (199 commits)
dt-bindings: serial: stm32: add power-domains property
serial: 8250_dw: Replace ACPI device check by a quirk
serial: Lock console when calling into driver before registration
serial: 8250_uniphier: Switch to use uart_read_port_properties()
serial: 8250_tegra: Switch to use uart_read_port_properties()
serial: 8250_pxa: Switch to use uart_read_port_properties()
serial: 8250_omap: Switch to use uart_read_port_properties()
serial: 8250_of: Switch to use uart_read_port_properties()
serial: 8250_lpc18xx: Switch to use uart_read_port_properties()
serial: 8250_ingenic: Switch to use uart_read_port_properties()
serial: 8250_dw: Switch to use uart_read_port_properties()
serial: 8250_bcm7271: Switch to use uart_read_port_properties()
serial: 8250_bcm2835aux: Switch to use uart_read_port_properties()
serial: 8250_aspeed_vuart: Switch to use uart_read_port_properties()
serial: port: Introduce a common helper to read properties
serial: core: Add UPIO_UNKNOWN constant for unknown port type
serial: core: Move struct uart_port::quirks closer to possible values
serial: sh-sci: Call sci_serial_{in,out}() directly
serial: core: only stop transmit when HW fifo is empty
serial: pch: Use uart_prepare_sysrq_char().
...
Here is the big set of USB and Thunderbolt changes for 6.9-rc1. Lots of
tiny changes and forward progress to support new hardware and better
support for existing devices. Included in here are:
- Thunderbolt (i.e. USB4) updates for newer hardware and uses as more
people start to use the hardware
- default USB authentication mode Kconfig and documentation update to
make it more obvious what is going on
- USB typec updates and enhancements
- usual dwc3 driver updates
- usual xhci driver updates
- function USB (i.e. gadget) driver updates and additions
- new device ids for lots of drivers
- loads of other small updates, full details in the shortlog
All of these, including a "last minute regression fix" have been in
linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZfwpzA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymS9QCdEuF6KJFLOrDrGS4NbZNSUPIVF6oAn350r4NX
CMZah37Dfr1VDCOOV4gQ
=HACL
-----END PGP SIGNATURE-----
Merge tag 'usb-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt changes for 6.9-rc1. Lots
of tiny changes and forward progress to support new hardware and
better support for existing devices. Included in here are:
- Thunderbolt (i.e. USB4) updates for newer hardware and uses as more
people start to use the hardware
- default USB authentication mode Kconfig and documentation update to
make it more obvious what is going on
- USB typec updates and enhancements
- usual dwc3 driver updates
- usual xhci driver updates
- function USB (i.e. gadget) driver updates and additions
- new device ids for lots of drivers
- loads of other small updates, full details in the shortlog
All of these, including a "last minute regression fix" have been in
linux-next with no reported issues"
* tag 'usb-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (185 commits)
usb: usb-acpi: Fix oops due to freeing uninitialized pld pointer
usb: gadget: net2272: Use irqflags in the call to net2272_probe_fin
usb: gadget: tegra-xudc: Fix USB3 PHY retrieval logic
phy: tegra: xusb: Add API to retrieve the port number of phy
USB: gadget: pxa27x_udc: Remove unused of_gpio.h
usb: gadget/snps_udc_plat: Remove unused of_gpio.h
usb: ohci-pxa27x: Remove unused of_gpio.h
usb: sl811-hcd: only defined function checkdone if QUIRK2 is defined
usb: Clarify expected behavior of dev_bin_attrs_are_visible()
xhci: Allow RPM on the USB controller (1022:43f7) by default
usb: isp1760: remove SLAB_MEM_SPREAD flag usage
usb: misc: onboard_hub: use pointer consistently in the probe function
usb: gadget: fsl: Increase size of name buffer for endpoints
usb: gadget: fsl: Add of device table to enable module autoloading
usb: typec: tcpm: add support to set tcpc connector orientatition
usb: typec: tcpci: add generic tcpci fallback compatible
dt-bindings: usb: typec-tcpci: add tcpci fallback binding
usb: gadget: fsl-udc: Replace custom log wrappers by dev_{err,warn,dbg,vdbg}
usb: core: Set connect_type of ports based on DT node
dt-bindings: usb: Add downstream facing ports to realtek binding
...
Per filesystems/sysfs.rst, show() should only use sysfs_emit()
or sysfs_emit_at() when formatting the value to be returned to user space.
coccinelle complains that there are still a couple of functions that use
snprintf(). Convert them to sysfs_emit().
CC: Helge Deller <deller@gmx.de>
CC: linux-omap@vger.kernel.org
CC: linux-fbdev@vger.kernel.org
CC: dri-devel@lists.freedesktop.org
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Helge Deller <deller@gmx.de>
This provides some code cleanup for the OMAP hwspinlock driver.
-----BEGIN PGP SIGNATURE-----
iQJJBAABCAAzFiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmX3nrwVHGFuZGVyc3Nv
bkBrZXJuZWwub3JnAAoJEAsfOT8Nma3FUqwP/iGU8Q75HC/a1QXQRNSK8QHerqUq
qVKJKyrrjzWBFqo9EMID0BlzoKzc8n8wvCRNJ3bJtfTtY7an5CSIIdSOMA+DgXYl
0ENToZUmxOHpPgqfr+Zf16hwXxMXI+RMM3TS+8dfTJWqn/58U82j4YX/53C1ko+G
37d2KWmnvCPYXUQcTxds4fWRGs0j8b9FLTG+AqWVd3VNQweowP8F0s2uDmHu68ZY
Qj5K2i9eomcat8vSd3V7oermQRAcxtktrZZChixMOkqPxNSh0QQ+JZNnNzMDhbx+
3hODfITkiPWSOuWkRDuQ7RPkOt8N9cPk54JTdDh0/BuO74ANDKomvdVZnhOYlMND
4WCwgxnqcPBoVJvEmPmZNJdsk5SfRtzPmGFzmxnz8Fv7tnF0Dz4m2R+2x4lpTCNn
YQ/cjcnv9k2gltJ9BtprsPSsM2yNlEXDmlwqnW04Lj1m/o2sofot9Hfjw7KOvF3C
3OC4bD4d8P/lFVVQvaKK8R6VakROGvmsGEUo4JLCClEwyilIRTk35ypLeTUPJym+
yW9UTbHMMQbxDtdnlaoA/VQGLTQt7yAh7IAr8+ZbC/GWYNdK+DtezCB8jP75MWuu
KEYbRqcfGg/FEO6+urVI8VtXU6Ev3+a99entmv3qCoF5S6qWUVoUfbHQm6keumGd
bCDFVgzm0r8J2hJP
=5TcF
-----END PGP SIGNATURE-----
Merge tag 'hwlock-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull hwspinlock updates from Bjorn Andersson:
"Some code cleanup for the OMAP hwspinlock driver"
* tag 'hwlock-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
hwspinlock: omap: Use index to get hwspinlock pointer
hwspinlock: omap: Use devm_hwspin_lock_register() helper
hwspinlock: omap: Use devm_pm_runtime_enable() helper
hwspinlock: omap: Remove unneeded check for OF node
We can simply use invalidate_rkey to check instead of adding a flag.
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
This transitions rpmsg_ctrl and rpmsg_char drivers away from the
deprecated ida_simple_*() API. It also makes the rpmsg_bus const.
-----BEGIN PGP SIGNATURE-----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=9yTY
-----END PGP SIGNATURE-----
Merge tag 'rpmsg-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull rpmsg updates from Bjorn Andersson:
"This transitions rpmsg_ctrl and rpmsg_char drivers away from the
deprecated ida_simple_*() API. It also makes the rpmsg_bus const"
* tag 'rpmsg-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
rpmsg: core: Make rpmsg_bus const
rpmsg: Remove usage of the deprecated ida_simple_xx() API
Qualcomm SM8650 audio, compute and modem remoteproc are added. Qualcomm
X1 Elite audio and compute remoteprocs are added, after support for
shutting down the bootloader-loaded firmware loaded into the audio DSP..
A dozen drivers in the subsystem are transitioned to use devres helpers
for remoteproc and memory allocations.
It makes it possible to acquire in-kernel handle to individual
remoteproc instances in a cluster.
The release of DMA memory for remoteproc virtio is corrected to ensure
that restarting due to a watchdog bite doesn't attempt to allocate the
memory again without first freeing it.
Last, but not least, a couple of DeviceTree binding cleanups.
-----BEGIN PGP SIGNATURE-----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=na/C
-----END PGP SIGNATURE-----
Merge tag 'rproc-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
"Qualcomm SM8650 audio, compute and modem remoteproc are added.
Qualcomm X1 Elite audio and compute remoteprocs are added, after
support for shutting down the bootloader-loaded firmware loaded into
the audio DSP..
A dozen drivers in the subsystem are transitioned to use devres
helpers for remoteproc and memory allocations - this makes it possible
to acquire in-kernel handle to individual remoteproc instances in a
cluster.
The release of DMA memory for remoteproc virtio is corrected to ensure
that restarting due to a watchdog bite doesn't attempt to allocate the
memory again without first freeing it.
Last, but not least, a couple of DeviceTree binding cleanups"
* tag 'rproc-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (30 commits)
remoteproc: qcom_q6v5_pas: Unload lite firmware on ADSP
remoteproc: qcom_q6v5_pas: Add support for X1E80100 ADSP/CDSP
dt-bindings: remoteproc: qcom,sm8550-pas: document the X1E80100 aDSP & cDSP
remoteproc: qcom_wcnss: Use devm_rproc_alloc() helper
remoteproc: qcom_q6v5_wcss: Use devm_rproc_alloc() helper
remoteproc: qcom_q6v5_pas: Use devm_rproc_alloc() helper
remoteproc: qcom_q6v5_mss: Use devm_rproc_alloc() helper
remoteproc: qcom_q6v5_adsp: Use devm_rproc_alloc() helper
dt-bindings: remoteproc: do not override firmware-name $ref
dt-bindings: remoteproc: qcom,glink-rpm-edge: drop redundant type from label
remoteproc: qcom: pas: correct data indentation
remoteproc: Make rproc_get_by_phandle() work for clusters
remoteproc: qcom: pas: Add SM8650 remoteproc support
remoteproc: qcom: pas: make region assign more generic
dt-bindings: remoteproc: qcom,sm8550-pas: document the SM8650 PAS
remoteproc: k3-dsp: Use devm_rproc_add() helper
remoteproc: k3-dsp: Use devm_ioremap_wc() helper
remoteproc: k3-dsp: Add devm action to release tsp
remoteproc: k3-dsp: Use devm_kzalloc() helper
remoteproc: k3-dsp: Use devm_ti_sci_get_by_phandle() helper
...
It is possible to set up dm-integrity with smaller sector size than
the logical sector size of the underlying device. In this situation,
dm-integrity guarantees that the outgoing bios have the same alignment as
incoming bios (so, if you create a filesystem with 4k block size,
dm-integrity would send 4k-aligned bios to the underlying device).
This guarantee was broken when integrity_recheck was implemented.
integrity_recheck sends bio that is aligned to ic->sectors_per_block. So
if we set up integrity with 512-byte sector size on a device with logical
block size 4k, we would be sending unaligned bio. This triggered a bug in
one of our internal tests.
This commit fixes it by determining the actual alignment of the
incoming bio and then makes sure that the outgoing bio in
integrity_recheck has the same alignment.
Fixes: c88f5e553f ("dm-integrity: recheck the integrity tag after a failure")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
- sh: hd64461: Make setup_hd64461() static
- sh: intc: Make intc_subsys const
- sh: dma-sysfs: Make dma_subsys const
-----BEGIN PGP SIGNATURE-----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=u8rR
-----END PGP SIGNATURE-----
Merge tag 'sh-for-v6.9-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux
Pull sh updates from John Paul Adrian Glaubitz:
"Two patches by Ricardo B. Marliere make two instances of struct
bus_type in the interrupt controller driver and the DMA sysfs
interface const since the driver core in the kernel is now able to
handle that.
A third patch by Artur Rojek enforces internal linkage for the
function setup_hd64461() in order to fix the build of hp6xx_defconfig
with -Werror=missing-prototypes"
* tag 'sh-for-v6.9-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux:
sh: hd64461: Make setup_hd64461() static
sh: intc: Make intc_subsys const
sh: dma-sysfs: Make dma_subsys const
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmX7sYwTHHdlaS5saXVA
a2VybmVsLm9yZwAKCRB2FHBfkEGgXiMeCADAUfjuJyU1jrQxjXv0U9u0tng77FAt
iT3+YFLR2Y4l8KRjD6Tpyk4fl/VN5VbJv1zPtSdNaViyri15gJjV7iMPujkx/pqO
pxNfbOVZG7VeKMrudJzP2BHN2mAf8N0qyuVTFyMwLO5EtJrY44t4PtkA1r5cO6Pc
eyoJWBofxH7XjkhOAMk4I3LXZMrq+hmtJ31G3eek6v/VjD1PtxU4f6/gJiqK9fz6
ssvSfII0aCIKman5sYlhl11TO8omz/68L4db25ZLDSCdOrE5ZlQykmUshluuoesw
eTUiuUZEh1O42Lsq7/hdUh+dSVGdTLHa9NKRQyWcruZiZ1idoZIA74ZW
=4vOw
-----END PGP SIGNATURE-----
Merge tag 'hyperv-next-signed-20240320' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv updates from Wei Liu:
- Use Hyper-V entropy to seed guest random number generator (Michael
Kelley)
- Convert to platform remove callback returning void for vmbus (Uwe
Kleine-König)
- Introduce hv_get_hypervisor_version function (Nuno Das Neves)
- Rename some HV_REGISTER_* defines for consistency (Nuno Das Neves)
- Change prefix of generic HV_REGISTER_* MSRs to HV_MSR_* (Nuno Das
Neves)
- Cosmetic changes for hv_spinlock.c (Purna Pavan Chandra Aekkaladevi)
- Use per cpu initial stack for vtl context (Saurabh Sengar)
* tag 'hyperv-next-signed-20240320' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
x86/hyperv: Use Hyper-V entropy to seed guest random number generator
x86/hyperv: Cosmetic changes for hv_spinlock.c
hyperv-tlfs: Rename some HV_REGISTER_* defines for consistency
hv: vmbus: Convert to platform remove callback returning void
mshyperv: Introduce hv_get_hypervisor_version function
x86/hyperv: Use per cpu initial stack for vtl context
hyperv-tlfs: Change prefix of generic HV_REGISTER_* MSRs to HV_MSR_*
-----BEGIN PGP SIGNATURE-----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=B5bp
-----END PGP SIGNATURE-----
Merge tag 'for-6.9-part2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fix from David Sterba:
"Fix a problem found in 6.7 after adding the temp-fsid feature which
changed device tracking in memory and broke grub-probe. This is used
on initrd-less systems. There were several iterations of the fix and
it took longer than expected"
* tag 'for-6.9-part2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: do not skip re-registration for the mounted device
- Improve dirsync performance by syncing on a dentry-set rather than
on a per-directory entry
-----BEGIN PGP SIGNATURE-----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=0fPf
-----END PGP SIGNATURE-----
Merge tag 'exfat-for-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat
Pull exfat updates from Namjae Jeon:
- Improve dirsync performance by syncing on a dentry-set rather than on
a per-directory entry
* tag 'exfat-for-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
exfat: remove duplicate update parent dir
exfat: do not sync parent dir if just update timestamp
exfat: remove unused functions
exfat: convert exfat_find_empty_entry() to use dentry cache
exfat: convert exfat_init_ext_entry() to use dentry cache
exfat: move free cluster out of exfat_init_ext_entry()
exfat: convert exfat_remove_entries() to use dentry cache
exfat: convert exfat_add_entry() to use dentry cache
exfat: add exfat_get_empty_dentry_set() helper
exfat: add __exfat_get_dentry_set() helper
Hi Linus,
Please pull a couple random cleanups for 6.9 plus a step-down
patch from Andy.
Thanks,
Yury
-----BEGIN PGP SIGNATURE-----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=DRcj
-----END PGP SIGNATURE-----
Merge tag 'bitmap-for-6.9' of https://github.com/norov/linux
Pull bitmap updates from Yury Norov:
"A couple of random cleanups plus a step-down patch from Andy"
* tag 'bitmap-for-6.9' of https://github.com/norov/linux:
bitmap: Step down as a reviewer
lib/find: optimize find_*_bit_wrap
lib/find_bit: Fix the code comments about find_next_bit_wrap
-----BEGIN PGP SIGNATURE-----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=8vTl
-----END PGP SIGNATURE-----
Merge tag 'nf-24-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net. There is a
larger batch of fixes still pending that will follow up asap, this is
what I deemed to be more urgent at this time:
1) Use clone view in pipapo set backend to release elements from destroy
path, otherwise it is possible to destroy elements twice.
2) Incorrect check for internal table flags lead to bogus transaction
objects.
3) Fix counters memleak in netdev basechain update error path,
from Quan Tian.
netfilter pull request 24-03-21
* tag 'nf-24-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: Fix a memory leak in nf_tables_updchain
netfilter: nf_tables: do not compare internal table flags on updates
netfilter: nft_set_pipapo: release elements in clone only from destroy path
====================
Link: https://lore.kernel.org/r/20240321112117.36737-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
A bunch of fixes that came in during the merge window, probably the most
substantial thing is the DPCM locking fix for compressed audio which has
been lurking for a while.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmX8GaoACgkQJNaLcl1U
h9Bbhgf8Dd66lvQDLnc6xJ5wznNrrlqgSGdMddIBmEUDz+dgw/ODMZXDG3mKmQSo
eE4eJ/fYeg/Kz4wrdaC+K5zZAZ+o61erXSKYmwyyE5YYnQLXd086Q6h8B0zKBA8e
vLChyVfoQE6lbIiGGedCQ+W2nP8k7HURkafTasBpq/PD/ZZgsQ8IbcQTf2EPQpw8
x9eRZFwswUvhaVckabJR23zIjkC/dlraAt0LAqWnjzetq0ZUL/7Um/SiKy+yF7f5
0w+QqzizbNee4kscadywAOB5u5S2P8F37cqH9cT6q0bvFYgwri0/CXtHd3m5164o
j/NQbxbFz/mlI4CFoXg5BCss5fd0zA==
=GHC9
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.9-merge-window' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.9
A bunch of fixes that came in during the merge window, probably the most
substantial thing is the DPCM locking fix for compressed audio which has
been lurking for a while.
In the case of firewire core function, the caller of show functions for
device attributes is not only sysfs user, but also device initialization.
This commit adds memo about it against the typical assumption that the
functions are just dedicated to sysfs user.
Link: https://lore.kernel.org/lkml/20240318091759.678326-1-o-takashi@sakamocchi.jp/
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEUEC6huC2BN0pvD5fKDiiPnotvG8FAmX5oKATHG1rbEBwZW5n
dXRyb25peC5kZQAKCRAoOKI+ei28b6tTB/4gBx9ZhrhPyI7FZ52adjVwxvtcnaWX
ifXhPU3/JL2CIMfW84bcp+6OSI/6F0nY7ZxgKBFx/7dWgWHNHDIaj/N0yvTH+Tqk
nDOWs36JvA2VzaANG9tOW7rjFKcGTzVJYJAP/zbVyOKmSN81r30tRogODUI4Tr7X
C5BxaBOpe0bUAi+O5cmbuTpFOzKO8/xAjq4rZm1/ix2ELetk91BPO305/nuWa6Qy
5m+WZ/5ec23wwJACmPOenIcHt/d6KJ9ew0XnatazasfmWeqZovbyrB19Yhi2kD+d
6o73120o27PCe9cQy09mOEOeISUmuCufp31u+xOGl7Hn9+G0lydbEUHs
=SXTQ
-----END PGP SIGNATURE-----
Merge tag 'linux-can-fixes-for-6.9-20240319' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2024-03-20
this is a pull request of 1 patch for net/master.
Martin Jocić contributes a fix for the kvaser_pciefd driver, so that
up to 8 channels on the Xilinx-based adapters can be used. This issue
has been introduced in net-next for v6.9.
linux-can-fixes-for-6.9-20240319
* tag 'linux-can-fixes-for-6.9-20240319' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: kvaser_pciefd: Add additional Xilinx interrupts
====================
Link: https://lore.kernel.org/r/20240320112144.582741-1-mkl@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The tests send 100 pings in 0.1 second intervals and force a timeout of
11 seconds, which is borderline (especially on debug kernels), resulting
in random failures in netdev CI [1].
Fix by increasing the timeout to 20 seconds. It should not prolong the
test unless something is wrong, in which case the test will rightfully
fail.
[1]
# selftests: net/forwarding: vxlan_bridge_1d_port_8472_ipv6.sh
# INFO: Running tests with UDP port 8472
# TEST: ping: local->local [ OK ]
# TEST: ping: local->remote 1 [FAIL]
# Ping failed
[...]
Fixes: b07e9957f2 ("selftests: forwarding: Add VxLAN tests with a VLAN-unaware bridge for IPv6")
Fixes: 728b35259e ("selftests: forwarding: Add VxLAN tests with a VLAN-aware bridge for IPv6")
Reported-by: Paolo Abeni <pabeni@redhat.com>
Closes: https://lore.kernel.org/netdev/24a7051fdcd1f156c3704bca39e4b3c41dfc7c4b.camel@redhat.com/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240320065717.4145325-1-idosch@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The TX buffer in spi_transfer can be a NULL pointer, so the interrupt
handler may end up writing to the invalid memory and cause crashes.
Add a check to trans->tx_buf before using it.
Fixes: 1ce24864bf ("spi: mediatek: Only do dma for 4-byte aligned buffers")
Signed-off-by: Fei Shao <fshao@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://msgid.link/r/20240321070942.1587146-2-fshao@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
I do not feel that I'm up to the task anymore.
I hope this to be a temporary emergeny measure, but for now I'm sure this
is the best course of action for me.
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20240319121223.24474-1-fw@strlen.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Enforce internal linkage for setup_hd64461().
This fixes the following error:
arch/sh/cchips/hd6446x/hd64461.c:75:12: error: no previous prototype for 'setup_hd64461' [-Werror=missing-prototypes]
Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/20240211193451.106795-1-contact@artur-rojek.eu
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
If nft_netdev_register_hooks() fails, the memory associated with
nft_stats is not freed, causing a memory leak.
This patch fixes it by moving nft_stats_alloc() down after
nft_netdev_register_hooks() succeeds.
Fixes: b9703ed44f ("netfilter: nf_tables: support for adding new devices to an existing netdev chain")
Signed-off-by: Quan Tian <tianquan23@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
says:
====================
MT7530 DSA subdriver fix VLAN egress and handling of all link-local frames
This patch series fixes the VLAN tag egress procedure for link-local
frames, and fixes handling of all link-local frames.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
====================
Link: https://lore.kernel.org/r/20240314-b4-for-net-mt7530-fix-link-local-vlan-v2-0-7dbcf6429ba0@arinc9.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently, the MT753X switches treat frames with :01-0D and :0F MAC DAs as
regular multicast frames, therefore flooding them to user ports.
On page 205, section "8.6.3 Frame filtering" of the active standard, IEEE
Std 802.1Q™-2022, it is stated that frames with 01:80:C2:00:00:00-0F as MAC
DA must only be propagated to C-VLAN and MAC Bridge components. That means
VLAN-aware and VLAN-unaware bridges. On the switch designs with CPU ports,
these frames are supposed to be processed by the CPU (software). So we make
the switch only forward them to the CPU port. And if received from a CPU
port, forward to a single port. The software is responsible of making the
switch conform to the latter by setting a single port as destination port
on the special tag.
This switch intellectual property cannot conform to this part of the
standard fully. Whilst the REV_UN frame tag covers the remaining :04-0D and
:0F MAC DAs, it also includes :22-FF which the scope of propagation is not
supposed to be restricted for these MAC DAs.
Set frames with :01-03 MAC DAs to be trapped to the CPU port(s). Add a
comment for the remaining MAC DAs.
Note that the ingress port must have a PVID assigned to it for the switch
to forward untagged frames. A PVID is set by default on VLAN-aware and
VLAN-unaware ports. However, when the network interface that pertains to
the ingress port is attached to a vlan_filtering enabled bridge, the user
can remove the PVID assignment from it which would prevent the link-local
frames from being trapped to the CPU port. I am yet to see a way to forward
link-local frames while preventing other untagged frames from being
forwarded too.
Fixes: b8f126a8d5 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Whether VLAN-aware or not, on every VID VLAN table entry that has the CPU
port as a member of it, frames are set to egress the CPU port with the VLAN
tag stacked. This is so that VLAN tags can be appended after hardware
special tag (called DSA tag in the context of Linux drivers).
For user ports on a VLAN-unaware bridge, frame ingressing the user port
egresses CPU port with only the special tag.
For user ports on a VLAN-aware bridge, frame ingressing the user port
egresses CPU port with the special tag and the VLAN tag.
This causes issues with link-local frames, specifically BPDUs, because the
software expects to receive them VLAN-untagged.
There are two options to make link-local frames egress untagged. Setting
CONSISTENT or UNTAGGED on the EG_TAG bits on the relevant register.
CONSISTENT means frames egress exactly as they ingress. That means
egressing with the VLAN tag they had at ingress or egressing untagged if
they ingressed untagged. Although link-local frames are not supposed to be
transmitted VLAN-tagged, if they are done so, when egressing through a CPU
port, the special tag field will be broken.
BPDU egresses CPU port with VLAN tag egressing stacked, received on
software:
00:01:25.104821 AF Unknown (382365846), length 106:
| STAG | | VLAN |
0x0000: 0000 6c27 614d 4143 0001 0000 8100 0001 ..l'aMAC........
0x0010: 0026 4242 0300 0000 0000 0000 6c27 614d .&BB........l'aM
0x0020: 4143 0000 0000 0000 6c27 614d 4143 0000 AC......l'aMAC..
0x0030: 0000 1400 0200 0f00 0000 0000 0000 0000 ................
BPDU egresses CPU port with VLAN tag egressing untagged, received on
software:
00:23:56.628708 AF Unknown (25215488), length 64:
| STAG |
0x0000: 0000 6c27 614d 4143 0001 0000 0026 4242 ..l'aMAC.....&BB
0x0010: 0300 0000 0000 0000 6c27 614d 4143 0000 ........l'aMAC..
0x0020: 0000 0000 6c27 614d 4143 0000 0000 1400 ....l'aMAC......
0x0030: 0200 0f00 0000 0000 0000 0000 ............
BPDU egresses CPU port with VLAN tag egressing tagged, received on
software:
00:01:34.311963 AF Unknown (25215488), length 64:
| Mess |
0x0000: 0000 6c27 614d 4143 0001 0001 0026 4242 ..l'aMAC.....&BB
0x0010: 0300 0000 0000 0000 6c27 614d 4143 0000 ........l'aMAC..
0x0020: 0000 0000 6c27 614d 4143 0000 0000 1400 ....l'aMAC......
0x0030: 0200 0f00 0000 0000 0000 0000 ............
To prevent confusing the software, force the frame to egress UNTAGGED
instead of CONSISTENT. This way, frames can't possibly be received TAGGED
by software which would have the special tag field broken.
VLAN Tag Egress Procedure
For all frames, one of these options set the earliest in this order will
apply to the frame:
- EG_TAG in certain registers for certain frames.
This will apply to frame with matching MAC DA or EtherType.
- EG_TAG in the address table.
This will apply to frame at its incoming port.
- EG_TAG in the PVC register.
This will apply to frame at its incoming port.
- EG_CON and [EG_TAG per port] in the VLAN table.
This will apply to frame at its outgoing port.
- EG_TAG in the PCR register.
This will apply to frame at its outgoing port.
EG_TAG in certain registers for certain frames:
PPPoE Discovery_ARP/RARP: PPP_EG_TAG and ARP_EG_TAG in the APC register.
IGMP_MLD: IGMP_EG_TAG and MLD_EG_TAG in the IMC register.
BPDU and PAE: BPDU_EG_TAG and PAE_EG_TAG in the BPC register.
REV_01 and REV_02: R01_EG_TAG and R02_EG_TAG in the RGAC1 register.
REV_03 and REV_0E: R03_EG_TAG and R0E_EG_TAG in the RGAC2 register.
REV_10 and REV_20: R10_EG_TAG and R20_EG_TAG in the RGAC3 register.
REV_21 and REV_UN: R21_EG_TAG and RUN_EG_TAG in the RGAC4 register.
With this change, it can be observed that a bridge interface with stp_state
and vlan_filtering enabled will properly block ports now.
Fixes: b8f126a8d5 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Kconfig emits a warning for the following command:
$ make ARCH=x86_64 tinyconfig
...
.config:1380:warning: override: UNWINDER_GUESS changes choice state
When X86_64=y, the unwinder is exclusively selected from the following
three options:
- UNWINDER_ORC
- UNWINDER_FRAME_POINTER
- UNWINDER_GUESS
However, arch/x86/configs/tiny.config only specifies the values of the
last two. UNWINDER_ORC must be explicitly disabled.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240320154313.612342-1-masahiroy@kernel.org
Yan Zhai says:
====================
Report RCU QS for busy network kthreads
This changeset fixes a common problem for busy networking kthreads.
These threads, e.g. NAPI threads, typically will do:
* polling a batch of packets
* if there are more work, call cond_resched() to allow scheduling
* continue to poll more packets when rx queue is not empty
We observed this being a problem in production, since it can block RCU
tasks from making progress under heavy load. Investigation indicates
that just calling cond_resched() is insufficient for RCU tasks to reach
quiescent states. This also has the side effect of frequently clearing
the TIF_NEED_RESCHED flag on voluntary preempt kernels. As a result,
schedule() will not be called in these circumstances, despite schedule()
in fact provides required quiescent states. This at least affects NAPI
threads, napi_busy_loop, and also cpumap kthread.
By reporting RCU QSes in these kthreads periodically before cond_resched, the
blocked RCU waiters can correctly progress. Instead of just reporting QS for
RCU tasks, these code share the same concern as noted in the commit
d28139c4e9 ("rcu: Apply RCU-bh QSes to RCU-sched and RCU-preempt when safe").
So report a consolidated QS for safety.
It is worth noting that, although this problem is reproducible in
napi_busy_loop, it only shows up when setting the polling interval to as high
as 2ms, which is far larger than recommended 50us-100us in the documentation.
So napi_busy_loop is left untouched.
Lastly, this does not affect RT kernels, which does not enter the scheduler
through cond_resched(). Without the mentioned side effect, schedule() will
be called time by time, and clear the RCU task holdouts.
V4: https://lore.kernel.org/bpf/cover.1710525524.git.yan@cloudflare.com/
V3: https://lore.kernel.org/lkml/20240314145459.7b3aedf1@kernel.org/t/
V2: https://lore.kernel.org/bpf/ZeFPz4D121TgvCje@debian.debian/
V1: https://lore.kernel.org/lkml/Zd4DXTyCf17lcTfq@debian.debian/#t
====================
Link: https://lore.kernel.org/r/cover.1710877680.git.yan@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When there are heavy load, cpumap kernel threads can be busy polling
packets from redirect queues and block out RCU tasks from reaching
quiescent states. It is insufficient to just call cond_resched() in such
context. Periodically raise a consolidated RCU QS before cond_resched
fixes the problem.
Fixes: 6710e11269 ("bpf: introduce new bpf cpu map type BPF_MAP_TYPE_CPUMAP")
Reviewed-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: Yan Zhai <yan@cloudflare.com>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://lore.kernel.org/r/c17b9f1517e19d813da3ede5ed33ee18496bb5d8.1710877680.git.yan@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
NAPI threads can keep polling packets under load. Currently it is only
calling cond_resched() before repolling, but it is not sufficient to
clear out the holdout of RCU tasks, which prevent BPF tracing programs
from detaching for long period. This can be reproduced easily with
following set up:
ip netns add test1
ip netns add test2
ip -n test1 link add veth1 type veth peer name veth2 netns test2
ip -n test1 link set veth1 up
ip -n test1 link set lo up
ip -n test2 link set veth2 up
ip -n test2 link set lo up
ip -n test1 addr add 192.168.1.2/31 dev veth1
ip -n test1 addr add 1.1.1.1/32 dev lo
ip -n test2 addr add 192.168.1.3/31 dev veth2
ip -n test2 addr add 2.2.2.2/31 dev lo
ip -n test1 route add default via 192.168.1.3
ip -n test2 route add default via 192.168.1.2
for i in `seq 10 210`; do
for j in `seq 10 210`; do
ip netns exec test2 iptables -I INPUT -s 3.3.$i.$j -p udp --dport 5201
done
done
ip netns exec test2 ethtool -K veth2 gro on
ip netns exec test2 bash -c 'echo 1 > /sys/class/net/veth2/threaded'
ip netns exec test1 ethtool -K veth1 tso off
Then run an iperf3 client/server and a bpftrace script can trigger it:
ip netns exec test2 iperf3 -s -B 2.2.2.2 >/dev/null&
ip netns exec test1 iperf3 -c 2.2.2.2 -B 1.1.1.1 -u -l 1500 -b 3g -t 100 >/dev/null&
bpftrace -e 'kfunc:__napi_poll{@=count();} interval:s:1{exit();}'
Report RCU quiescent states periodically will resolve the issue.
Fixes: 29863d41bb ("net: implement threaded-able napi poll loop support")
Reviewed-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: Yan Zhai <yan@cloudflare.com>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://lore.kernel.org/r/4c3b0d3f32d3b18949d75b18e5e1d9f13a24f025.1710877680.git.yan@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When under heavy load, network processing can run CPU-bound for many
tens of seconds. Even in preemptible kernels (non-RT kernel), this can
block RCU Tasks grace periods, which can cause trace-event removal to
take more than a minute, which is unacceptably long.
This commit therefore creates a new helper function that passes through
both RCU and RCU-Tasks quiescent states every 100 milliseconds. This
hard-coded value suffices for current workloads.
Suggested-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: Yan Zhai <yan@cloudflare.com>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://lore.kernel.org/r/90431d46ee112d2b0af04dbfe936faaca11810a5.1710877680.git.yan@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add information to our documentation for the XDP features
and related ethtool stats.
While we're here, we also add the missing timestamp stats.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240319163534.38796-1-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The make htmldoc command failed with the following error
... include/linux/bitmap.h:524: ERROR: Unexpected indentation.
... include/linux/bitmap.h:524: CRITICAL: Unexpected section title or transition.
Move the visual representation to a literal block.
Fixes: de5f843389 ("lib/bitmap: Introduce bitmap_scatter() and bitmap_gather() helpers")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/linux-kernel/20240312153059.3ffde1b7@canb.auug.org.au/
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Acked-by: Yury Norov <yury.norov@gmail.com>
Link: https://lore.kernel.org/r/20240314120006.458580-1-herve.codina@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Zyn6
-----END PGP SIGNATURE-----
Merge tag 'v6.9-rc-smb3-server-fixes' of git://git.samba.org/ksmbd
Pull smb server updates from Steve French:
- add support for durable file handles (an important data integrity
feature)
- fixes for potential out of bounds issues
- fix possible null dereference in close
- getattr fixes
- trivial typo fix and minor cleanup
* tag 'v6.9-rc-smb3-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: remove module version
ksmbd: fix potencial out-of-bounds when buffer offset is invalid
ksmbd: fix slab-out-of-bounds in smb_strndup_from_utf16()
ksmbd: Fix spelling mistake "connction" -> "connection"
ksmbd: fix possible null-deref in smb_lazy_parent_lease_break_close
ksmbd: add support for durable handles v1/v2
ksmbd: mark SMB2_SESSION_EXPIRED to session when destroying previous session
ksmbd: retrieve number of blocks using vfs_getattr in set_file_allocation_info
ksmbd: replace generic_fillattr with vfs_getattr
Tracing:
- Update makefiles for latency-collector and RTLA, using tools/build/
makefiles like perf does, inheriting its benefits. For example, having a
proper way to handle library dependencies.
- The timerlat tracer has an interface for any tool to use. rtla timerlat
tool uses this interface dispatching its own threads as workload. But,
rtla timerlat could also be used for any other process. So, add 'rtla
timerlat -U' option, allowing the timerlat tool to measure the latency of
any task using the timerlat tracer interface.
Verification:
- Update makefiles for verification/rv, using tools/build/ makefiles like
perf does, inheriting its benefits. For example, having a proper way to
handle dependencies.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZfr9+RQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qnnEAQDOZhb7vaDWim5yF8Gg5lAemgdC0O3B
nX7Lky5ZxuZNywEAvlInr9pUprqtNKu5zVDruf0jAr/d55EpPJnufKwRlAI=
=LLIw
-----END PGP SIGNATURE-----
Merge tag 'trace-tools-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull trace tool updates from Steven Rostedt:
"Tracing:
- Update makefiles for latency-collector and RTLA, using tools/build/
makefiles like perf does, inheriting its benefits. For example,
having a proper way to handle library dependencies.
- The timerlat tracer has an interface for any tool to use. rtla
timerlat tool uses this interface dispatching its own threads as
workload. But, rtla timerlat could also be used for any other
process. So, add 'rtla timerlat -U' option, allowing the timerlat
tool to measure the latency of any task using the timerlat tracer
interface.
Verification:
- Update makefiles for verification/rv, using tools/build/ makefiles
like perf does, inheriting its benefits. For example, having a
proper way to handle dependencies"
* tag 'trace-tools-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tools/rtla: Add -U/--user-load option to timerlat
tools/verification: Use tools/build makefiles on rv
tools/rtla: Use tools/build makefiles to build rtla
tools/tracing: Use tools/build makefiles on latency-collector
Restore skipping transaction if table update does not modify flags.
Fixes: 179d9ba555 ("netfilter: nf_tables: fix table flag updates")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Clone already always provides a current view of the lookup table, use it
to destroy the set, otherwise it is possible to destroy elements twice.
This fix requires:
212ed75dc5 ("netfilter: nf_tables: integrate pipapo into commit protocol")
which came after:
9827a0e6e2 ("netfilter: nft_set_pipapo: release elements in clone from abort path").
Fixes: 9827a0e6e2 ("netfilter: nft_set_pipapo: release elements in clone from abort path")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add Qualcomm RTC driver to the linux-arm-msm list, to ensure that
members of the Qualcomm community gets Cc'ed, to assist with reviews
etc.
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20240319-maintainer-msm-add-rtc-v1-1-3a4f7d41b4d4@quicinc.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The current syscall wrapper macros break 64-bit arguments on
rv32 because they only guarantee the first N input registers are
passed to syscalls that accept N arguments. According to the
calling convention, values twice the word size reside in register
pairs and as a result, syscall arguments don't always have a
direct register mapping on rv32.
Instead of using `__MAP(x,__SC_LONG,__VA_ARGS__)` to declare the
type of the `__se(_compat)_sys_*` functions on rv32, change the
function declarations to accept `ulong` arguments and alias them
to the actual syscall implementations, similarly to the existing
macros in include/linux/syscalls.h. This matches previous
behavior and ensures registers are passed to syscalls as-is, no
matter which argument types they expect.
Fixes: 08d0ce30e0 ("riscv: Implement syscall wrappers")
Reported-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/r/20240311193143.2981310-2-samitolvanen@google.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
There was reported lockup when we exit a snapshot with many exceptions.
Fix this by adding "cond_resched" to the loop that frees the exceptions.
Reported-by: John Pittman <jpittman@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Commit c8fb7d7e48 ("kconfig: fix broken dependency in randconfig-
generated .config") fixed the issue, but I did not add a test case.
This commit adds a test case that emulates the reported situation.
The test would fail without c8fb7d7e48.
To handle the choice "choose X", FOO must be calculated beforehand.
FOO depends on A, which is a member of another choice "choose A or B".
Kconfig _temporarily_ assumes the value of A to proceed. The choice
"choose A or B" will be shuffled later, but the result may or may not
meet "FOO depends on A". Kconfig should invalidate the symbol values
and recompute them.
In the real example for ARCH=arm64, the choice "Instrumentation type"
needs the value of CPU_BIG_ENDIAN. The choice "Endianness" will be
shuffled later.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Since commit 3b9a19e089 ("kconfig: loop as long as we changed some
symbols in randconfig"), conf_set_all_new_symbols() is repeated until
there is no more choice left to be shuffled. The motivation was to
shuffle a choice nested in another choice.
Although commit 09d5873e4d ("kconfig: allow only 'config', 'comment',
and 'if' inside 'choice'") disallowed the nested choice structure,
we must still keep 3b9a19e089 because there are still cases where
conf_set_all_new_symbols() must iterate.
scripts/kconfig/tests/choice_randomize/Kconfig is the test case.
The second choice depends on 'B', which is the member of the first
choice.
With 3b9a19e089 reverted, we would never get the pattern specified by
scripts/kconfig/tests/choice_randomize/expected_config2.
A real example can be found in lib/Kconfig.debug. Without 3b9a19e089,
the randconfig would not shuffle the "Compressed Debug information"
choice, which depends on DEBUG_INFO, which is derived from another
choice "Debug information".
My goal is to refactor Kconfig so that randconfig will work more
simply, without using the loop.
For now, let's add a test case to ensure all dependent choices are
shuffled, as it is a somewhat tricky case for the current Kconfig.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
OD is not supported on Arcturus, so the OD table
should not be used.
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To fix the entity rq NULL issue. This setting has been moved
to upper level.
Fixes: b70438004a ("drm/amdgpu: move buffer funcs setting up a level")
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When mode switching is triggered there is momentary noise visible on
some HDMI TV or displays.
[How]
Wait for 2 frames to make sure we have enough time to send out AV mute
and sink receives a full frame.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Leo Ma <hanghong.ma@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 340383c734 ("drm/amd/display: Remove pixle rate
limit for subvp")
[why]
The original commit causes a regression when subvp is applied
on ODM required 8k60hz timing. The display shows black screen
on boot. The issue can be recovered with hotplug. It also causes
MPO to fail. We will temprarily revert this commit and investigate
the root cause further.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Reviewed-by: Martin Leung <martin.leung@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
