Commit Graph

277202 Commits

Author SHA1 Message Date
Jeff Mahoney
87826df0ec btrfs: delalloc for page dirtied out-of-band in fixup worker
We encountered an issue that was easily observable on s/390 systems but
 could really happen anywhere. The timing just seemed to hit reliably
 on s/390 with limited memory.

 The gist is that when an unexpected set_page_dirty() happened, we'd
 run into the BUG() in btrfs_writepage_fixup_worker since it wasn't
 properly set up for delalloc.

 This patch does the following:
 - Performs the missing delalloc in the fixup worker
 - Allow the start hook to return -EBUSY which informs __extent_writepage
   that it should mark the page skipped and not to redirty it. This is
   required since the fixup worker can fail with -ENOSPC and the page
   will have already been redirtied. That causes an Oops in
   drop_outstanding_extents later. Retrying the fixup worker could
   lead to an infinite loop. Deferring the page redirty also saves us
   some cycles since the page would be stuck in a resubmit-redirty loop
   until the fixup worker completes. It's not harmful, just wasteful.
 - If the fixup worker fails, we mark the page and mapping as errored,
   and end the writeback, similar to what we would do had the page
   actually been submitted to writeback.

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
2012-02-15 16:40:25 +01:00
Tsutomu Itoh
a7e221e900 Btrfs: fix memory leak in load_free_space_cache()
load_free_space_cache() has forgotten to free path.

Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
2012-02-15 16:40:24 +01:00
Arne Jansen
859acaf1a2 btrfs: don't check DUP chunks twice
Because scrub enumerates the dev extent tree to find the chunks to scrub,
it currently finds each DUP chunk twice and also scrubs it twice. This
patch makes sure that scrub_chunk only checks that part of the chunk the
dev extent has been found for. This only changes the behaviour for DUP
chunks.

Reported-and-tested-by: Stefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: Arne Jansen <sensille@gmx.net>
2012-02-15 16:40:24 +01:00
Liu Bo
2cac13e41b Btrfs: fix trim 0 bytes after a device delete
A user reported a bug of btrfs's trim, that is we will trim 0 bytes
after a device delete.

The reproducer:

$ mkfs.btrfs disk1
$ mkfs.btrfs disk2
$ mount disk1 /mnt
$ fstrim -v /mnt
$ btrfs device add disk2 /mnt
$ btrfs device del disk1 /mnt
$ fstrim -v /mnt

This is because after we delete the device, the block group may start from
a non-zero place, which will confuse trim to discard nothing.

Reported-by: Lutz Euler <lutz.euler@freenet.de>
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
2012-02-15 16:40:23 +01:00
Jeff Liu
6af021d8fc Btrfs: return the internal error unchanged if btrfs_get_extent_fiemap() call failed for SEEK_DATA/SEEK_HOLE inquiry
Given that ENXIO only means "offset beyond EOF" for either SEEK_DATA or SEEK_HOLE inquiry
in a desired file range, so we should return the internal error unchanged if btrfs_get_extent_fiemap()
call failed, rather than ENXIO.

Cc: Dave Chinner <david@fromorbit.com>
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
2012-02-15 16:40:23 +01:00
Jan Schmidt
8f24b49688 Btrfs: avoid positive number with ERR_PTR
inode_ref_info() returns 1 when the element wasn't found and < 0 on error,
just like btrfs_search_slot(). In iref_to_path() it's an error when the
inode ref can't be found, thus we return ERR_PTR(ret) in that case. In order
to avoid ERR_PTR(1), we now set ret to -ENOENT in that case.

Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2012-02-15 16:40:23 +01:00
Keith Mannthey
941b2ddf71 btrfs: Sector Size check during Mount
Gracefully fail when trying to mount a BTRFS file system that has a
sectorsize smaller than PAGE_SIZE.

On PPC it is possible to build a FS while using a 4k PAGE_SIZE kernel
then boot into a 64K PAGE_SIZE kernel.  Presently open_ctree fails in an
endless loop and hangs the machine in this situation.

My debugging has show this Sector size < Page size to be a non trivial
situation and a graceful exit from the situation would be nice for the
time being.

Signed-off-by: Keith Mannthey <kmannth@us.ibm.com>
2012-02-15 16:40:22 +01:00
Chris Mason
d98456fcaf Btrfs: don't reserve data with extents locked in btrfs_fallocate
btrfs_fallocate tries to allocate space only if ranges in the file don't
already exist.  But the enospc checks it does are not allowed with
extents locked.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-01-31 20:27:41 -05:00
Chris Mason
9998eb7034 Btrfs: fix reservations in btrfs_page_mkwrite
Josef fixed btrfs_page_mkwrite to properly release reserved
extents if there was an error.  But if we fail to get a reservation
and we fail to dirty the inode (for ENOSPC reasons), we'll end up
trying to release a reservation we never had.

This makes sure we only release if we were able to reserve.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-01-27 10:44:44 -05:00
Josef Bacik
9b23062840 Btrfs: advance window_start if we're using a bitmap
If we span a long area in a bitmap we could end up taking a lot of time
searching to the next free area if we're searching from the original
window_start, so advance window_start in order to make sure we don't do any
superficial searching.  Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-01-26 15:01:12 -05:00
David Sterba
0c4e538bcc btrfs: mask out gfp flags in releasepage
btree_releasepage is a callback and can be passed unknown gfp flags and then
they may end up in kmem_cache_alloc called from alloc_extent_state, slab
allocator will BUG_ON when there is HIGHMEM or DMA32 flag set.

This may happen when btrfs is mounted from a loop device, which masks out
__GFP_IO flag. The check in try_release_extent_state

3399                 if ((mask & GFP_NOFS) == GFP_NOFS)
3400                         mask = GFP_NOFS;

will not work and passes unfiltered flags further resulting in crash at
mm/slab.c:2963

 [<000000000024ae4c>] cache_alloc_refill+0x3b4/0x5c8
 [<000000000024c810>] kmem_cache_alloc+0x204/0x294
 [<00000000001fd3c2>] mempool_alloc+0x52/0x170
 [<000003c000ced0b0>] alloc_extent_state+0x40/0xd4 [btrfs]
 [<000003c000cee5ae>] __clear_extent_bit+0x38a/0x4cc [btrfs]
 [<000003c000cee78c>] try_release_extent_state+0x9c/0xd4 [btrfs]
 [<000003c000cc4c66>] btree_releasepage+0x7e/0xd0 [btrfs]
 [<0000000000210d84>] shrink_page_list+0x6a0/0x724
 [<0000000000211394>] shrink_inactive_list+0x230/0x578
 [<0000000000211bb8>] shrink_list+0x6c/0x120
 [<0000000000211e4e>] shrink_zone+0x1e2/0x228
 [<0000000000211f24>] shrink_zones+0x90/0x254
 [<0000000000213410>] do_try_to_free_pages+0xac/0x420
 [<0000000000213ae0>] try_to_free_pages+0x13c/0x1b0
 [<0000000000204e6c>] __alloc_pages_nodemask+0x5b4/0x9a8
 [<00000000001fb04a>] grab_cache_page_write_begin+0x7e/0xe8

Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-01-26 15:01:12 -05:00
Miao Xie
9e622d6bea Btrfs: fix enospc error caused by wrong checks of the chunk
When we did sysbench test for inline files, enospc error happened easily though
there was lots of free disk space which could be allocated for new chunks.

Reproduce steps:
 # mkfs.btrfs -b $((2 * 1024 * 1024 * 1024)) <test partition>
 # mount <test partition> /mnt
 # ulimit -n 102400
 # cd /mnt
 # sysbench --num-threads=1 --test=fileio --file-num=81920 \
 > --file-total-size=80M --file-block-size=1K --file-io-mode=sync \
 > --file-test-mode=seqwr prepare
 # sysbench --num-threads=1 --test=fileio --file-num=81920 \
 > --file-total-size=80M --file-block-size=1K --file-io-mode=sync \
 > --file-test-mode=seqwr run
 <soon later, BUG_ON() was triggered by enospc error>

The reason of this bug is:
Now, we can reserve space which is larger than the free space in the chunks if
we have enough free disk space which can be used for new chunks. By this way,
the space allocator should allocate a new chunk by force if there is no free
space in the free space cache. But there are two wrong checks which break this
operation.

One is
	if (ret == -ENOSPC && num_bytes > min_alloc_size)
in btrfs_reserve_extent(), it is wrong, we should try to allocate a new chunk
even we fail to allocate free space by minimum allocable size.

The other is
	if (space_info->force_alloc)
		force = space_info->force_alloc;
in do_chunk_alloc(). It makes the allocator ignore CHUNK_ALLOC_FORCE If someone
sets ->force_alloc to CHUNK_ALLOC_LIMITED, and makes the enospc error happen.

Fix these two wrong checks. Especially the second one, we fix it by changing
the value of CHUNK_ALLOC_LIMITED and CHUNK_ALLOC_FORCE, and make
CHUNK_ALLOC_FORCE greater than CHUNK_ALLOC_LIMITED since CHUNK_ALLOC_FORCE has
higher priority. And if the value which is passed in by the caller is greater
than ->force_alloc, use the passed value.

Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-01-26 15:01:12 -05:00
Liu Bo
7ec31b548a Btrfs: do not defrag a file partially
xfstests 218 complains that btrfs defrags a file partially:
 After: 1
 Write backwards sync, but contiguous - should defrag to 1 extent
 Before: 10
-After: 1
+After: 2

To fix this, we need to set max_to_defrag count properly.

Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-01-26 15:01:12 -05:00
Stefan Behrens
0b485143d8 Btrfs: fix warning for 32-bit build of fs/btrfs/check-integrity.c
There have been 4 warnings on 32-bit build, they are herewith fixed.

Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-01-26 15:01:11 -05:00
Josef Bacik
0b4a9d248f Btrfs: use cluster->window_start when allocating from a cluster bitmap
We specifically set window_start in the cluster struct to indicate where the
cluster starts in a bitmap, but we've been using min_start to indicate where
we're searching from.  This is usually the start of the blockgroup, so
essentially means we're constantly searching from the start of any bitmap we
find, which completely negates all the trouble we go to in order to setup a
cluster.  So start using window_start to make sure we actually use the area we
found.  Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-01-26 15:01:11 -05:00
Mitch Harder
8bedd51b61 Btrfs: Check for NULL page in extent_range_uptodate
A user has encountered a NULL pointer kernel oops in btrfs when
encountering media errors.  The problem has been identified
as an unhandled NULL pointer returned from find_get_page().
This modification simply checks for a NULL page, and returns
with an error if found (the extent_range_uptodate() function
returns 1 on errors).

After testing this patch, the user reported that the error with
the NULL pointer oops was solved.  However, there is still a
remaining problem with a thread becoming stuck in
wait_on_page_locked(page) in the read_extent_buffer_pages(...)
function in extent_io.c

       for (i = start_i; i < num_pages; i++) {
               page = extent_buffer_page(eb, i);
               wait_on_page_locked(page);
               if (!PageUptodate(page))
                       ret = -EIO;
       }

This patch leaves the issue with the locked page yet to be resolved.

Signed-off-by: Mitch Harder <mitch.harder@sabayonlinux.org>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-01-26 15:01:11 -05:00
Jan Kara
6dd70ce4eb btrfs: Fix busyloops in transaction waiting code
wait_log_commit() and wait_for_writer() were using slightly different
conditions for deciding whether they should call schedule() and whether they
should continue in the wait loop. Thus it could happen that we busylooped when
the first condition was not true while the second one was. That is burning CPU
cycles needlessly and is deadly on UP machines...

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-01-26 15:01:11 -05:00
Josef Bacik
357b9784b7 Btrfs: make sure a bitmap has enough bytes
We have only been checking for min_bytes available in bitmap entries, but we
won't successfully setup a bitmap cluster unless it has at least bytes in the
bitmap, so in the common case min_bytes is 4k and we want something like 2MB, so
if there are a bunch of bitmap entries with less than 2mb's in them, we'll
search all them anyway, which is suboptimal.  Fix this check.  Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-01-26 15:01:11 -05:00
Jan Schmidt
b1375d64c5 Btrfs: fix uninit warning in backref.c
Added initialization with the declaration of ret. It isn't set later on the
switch-default branch (which should never be taken).

Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-01-26 15:01:11 -05:00
Chris Mason
96bdc7dc61 Btrfs: use larger system chunks
system chunks by default are very small.  This makes them slightly
larger and also fixes the conditional checks to make sure we don't
allocate a billion of them at once.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-01-16 15:38:24 -05:00
Josef Bacik
f248679e86 Btrfs: add a delalloc mutex to inodes for delalloc reservations
I was using i_mutex for this, but we're getting bogus lockdep warnings by doing
that and theres no real way to get rid of those, so just stop using i_mutex to
protect delalloc metadata reservations and use a delalloc mutex instead.  This
shouldn't be contended often at all, only if you are writing and mmap writing to
the file at the same time.  Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>
2012-01-16 15:29:43 -05:00
Josef Bacik
8c2a3ca20f Btrfs: space leak tracepoints
This in addition to a script in my btrfs-tracing tree will help track down space
leaks when we're getting space left over in block groups on umount.  Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>
2012-01-16 15:29:43 -05:00
Josef Bacik
90290e1982 Btrfs: protect orphan block rsv with spin_lock
We've been seeing warnings coming out of the orphan commit stuff forever from
ceph.  Turns out it's because we're racing with checking if the orphan block
reserve is set, because we clear it outside of the spin_lock.  So leave the
normal fastpath checks where they are, but take the spin_lock and _recheck_ to
make sure we haven't had an orphan block rsv added in the meantime.  Then clear
the root's orphan block rsv and release the lock.  With this patch a user said
the warnings went away and they usually showed up pretty soon after he started
ceph.  Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>
2012-01-16 15:29:42 -05:00
Josef Bacik
3f7de037fb Btrfs: add allocator tracepoints
I used these tracepoints when figuring out what the cluster stuff was doing, so
add them to mainline in case we need to profile this stuff again.  Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>
2012-01-16 15:29:42 -05:00
Josef Bacik
45a8090e62 Btrfs: don't call btrfs_throttle in file write
Btrfs_throttle will make us wait if there is a currently committing transaction
until we can open new transactions, which is ridiculous since we don't actually
start any transactions within the file write path anyway, so all this does is
introduce big latencies if we have a sync/fsync heavy workload going on while
somebody else is trying to do work.  Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-01-16 15:28:55 -05:00
Josef Bacik
ec39e180fd Btrfs: release space on error in page_mkwrite
If updating the inode gave us an ENOSPC we were just returning in page_mkwrite,
which is a problem since we make our reservation right before trying to update
the inode, so fix the out label so that we actually free our reservation.
Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-01-16 15:28:54 -05:00
Miao Xie
f70a9a6b94 Btrfs: fix btrfsck error 400 when truncating a compressed
Reproduce steps:
 # mkfs.btrfs /dev/sdb5
 # mount /dev/sdb5 -o compress=lzo /mnt
 # dd if=/dev/zero of=/mnt/tmpfile bs=128K count=1
 # sync
 # truncate -s 64K /mnt/tmpfile
 root 5 inode 257 errors 400

This is because of the wrong if condition, which is used to check if we should
subtract the bytes of the dropped range from i_blocks/i_bytes of i-node or not.
When we truncate a compressed extent, btrfs substracts the bytes of the whole
extent, it's wrong. We should substract the real size that we truncate, no
matter it is a compressed extent or not. Fix it.

Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-01-16 15:28:54 -05:00
Josef Bacik
7ad85bb76a Btrfs: do not use btrfs_end_transaction_throttle everywhere
A user reported a problem where things like open with O_CREAT would take up to
30 seconds when he had nfs activity on the same mount.  This is because all of
our quick metadata operations, like create, symlink etc all do
btrfs_end_transaction_throttle, which if the transaction is blocked will wait
for the commit to complete before it returns.  This adds a ridiculous amount of
latency and isn't really needed.  The normal btrfs_end_transaction will mark the
transaction as blocked and wake the transaction kthread up if it thinks the
transaction needs to end (this being in the running out of global reserve space
scenario), and this is all that is really needed since we've already done
everything we're going to do, we just need to return.  This should help people
with the latency they were seeing when using synchronous heavy workloads.
Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-01-16 15:28:54 -05:00
Chris Mason
c126dea771 Merge branch 'integrity-check-patch-v2' of git://btrfs.giantdisaster.de/git/btrfs into integration
Conflicts:
	fs/btrfs/ctree.h
	fs/btrfs/super.c

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-01-16 15:27:58 -05:00
Chris Mason
9785dbdf26 Merge branch 'for-chris' of git://git.jan-o-sch.net/btrfs-unstable into integration 2012-01-16 15:26:31 -05:00
Chris Mason
d756bd2d93 Merge branch 'for-chris' of git://repo.or.cz/linux-btrfs-devel into integration
Conflicts:
	fs/btrfs/volumes.c

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-01-16 15:26:17 -05:00
Chris Mason
27263e2832 Merge branch 'restriper' of git://github.com/idryomov/btrfs-unstable into integration 2012-01-16 15:26:02 -05:00
Chris Mason
64e05503ab Merge branch 'allocation-fixes' into integration 2012-01-16 15:25:42 -05:00
Ilya Dryomov
19a39dce3b Btrfs: add balance progress reporting
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2012-01-16 22:04:49 +02:00
Ilya Dryomov
de322263d3 Btrfs: allow for resuming restriper after it was paused
Recognize BTRFS_BALANCE_RESUME flag passed from userspace.  We use the
same heuristics used when recovering balance after a crash to try to
start where we left off last time.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2012-01-16 22:04:49 +02:00
Ilya Dryomov
a7e99c691a Btrfs: allow for canceling restriper
Implement an ioctl for canceling restriper.  Currently we wait until
relocation of the current block group is finished, in future this can be
done by triggering a commit.  Balance item is deleted and no memory
about the interrupted balance is kept.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2012-01-16 22:04:49 +02:00
Ilya Dryomov
837d5b6e46 Btrfs: allow for pausing restriper
Implement an ioctl for pausing restriper.  This pauses the relocation,
but balance is still considered to be "in progress": balance item is
not deleted, other volume operations cannot be started, etc.  If paused
in the middle of profile changing operation we will continue making
allocations with the target profile.

Add a hook to close_ctree() to pause restriper and free its data
structures on unmount.  (It's safe to unmount when restriper is in
"paused" state, we will resume with the same parameters on the next
mount)

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2012-01-16 22:04:49 +02:00
Ilya Dryomov
9555c6c180 Btrfs: add skip_balance mount option
Since restriper kthread starts involuntarily on mount and can suck cpu
and memory bandwidth add a mount option to forcefully skip it.  The
restriper in that case hangs around in paused state and can be resumed
from userspace when it's convenient.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2012-01-16 22:04:48 +02:00
Ilya Dryomov
596410151e Btrfs: recover balance on mount
On mount, if balance item is found, resume balance in a separate
kernel thread.

Try to be smart to continue roughly where previous balance (or convert)
was interrupted.  For chunk types that were being converted to some
profile we turn on soft convert, in case of a simple balance we turn on
usage filter and relocate only less-than-90%-full chunks of that type.
These are just heuristics but they help quite a bit, and can be improved
in future.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2012-01-16 22:04:48 +02:00
Ilya Dryomov
0940ebf6b9 Btrfs: save balance parameters to disk
Introduce a new btree objectid for storing balance item.  The reason is
to be able to resume restriper after a crash with the same parameters.
Balance item has a very high objectid and goes into tree of tree roots.

The key for the new item is as follows:

	[ BTRFS_BALANCE_OBJECTID ; BTRFS_BALANCE_ITEM_KEY ; 0 ]

Older kernels simply ignore it so it's safe to mount with an older
kernel and then go back to the newer one.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2012-01-16 22:04:48 +02:00
Ilya Dryomov
cfa4c961cc Btrfs: soft profile changing mode (aka soft convert)
When doing convert from one profile to another if soft mode is on
restriper won't touch chunks that already have the profile we are
converting to.  This is useful if e.g. half of the FS was converted
earlier.

The soft mode switch is (like every other filter) per-type.  This means
that we can convert for example meta chunks the "hard" way while
converting data chunks selectively with soft switch.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2012-01-16 22:04:48 +02:00
Ilya Dryomov
e4d8ec0f65 Btrfs: implement online profile changing
Profile changing is done by launching a balance with
BTRFS_BALANCE_CONVERT bits set and target fields of respective
btrfs_balance_args structs initialized.  Profile reducing code in this
case will pick restriper's target profile if it's available instead of
doing a blind reduce.  If target profile is not yet available it goes
back to a plain reduce.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2012-01-16 22:04:48 +02:00
Ilya Dryomov
70922617b0 Btrfs: do not reduce profile in do_chunk_alloc()
Every caller of do_chunk_alloc() feeds it the reduced allocation
profile, so stop trying to reduce it one more time.  Instead check the
validity of the passed profile.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2012-01-16 22:04:48 +02:00
Ilya Dryomov
ea67176ae8 Btrfs: virtual address space subset filter
Select chunks which have at least one byte located inside a given
[vstart, vend) virtual address space range.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2012-01-16 22:04:48 +02:00
Ilya Dryomov
94e60d5a5c Btrfs: devid subset filter
Select chunks which have at least one byte of at least one stripe
located on a device with devid X in a given [pstart,pend) physical
address range.

This filter only works when devid filter is turned on.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2012-01-16 22:04:48 +02:00
Ilya Dryomov
409d404b46 Btrfs: devid filter
Relocate chunks which have at least one stripe located on a device with
devid X.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2012-01-16 22:04:47 +02:00
Ilya Dryomov
5ce5b3c091 Btrfs: usage filter
Select chunks that are less than X percent full.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2012-01-16 22:04:47 +02:00
Ilya Dryomov
ed25e9b26f Btrfs: profiles filter
Select chunks based on a given profile mask.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2012-01-16 22:04:47 +02:00
Ilya Dryomov
f43ffb60fd Btrfs: add basic infrastructure for selective balancing
This allows to have a separate set of filters for each chunk type
(data,meta,sys).  The code however is generic and switch on chunk type
is only done once.

This commit also adds a type filter: it allows to balance for example
meta and system chunks w/o touching data ones.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2012-01-16 22:04:47 +02:00
Ilya Dryomov
c9e9f97bdf Btrfs: add basic restriper infrastructure
Add basic restriper infrastructure: extended balancing ioctl and all
related ioctl data structures, add data structure for tracking
restriper's state to fs_info, etc.  The semantics of the old balancing
ioctl are fully preserved.

Explicitly disallow any volume operations when balance is in progress.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2012-01-16 22:04:47 +02:00