Even though ENETC interfaces are exposed as individual PCIe PFs with
their own driver instances, the ENETC is still fundamentally a
multi-port Ethernet controller, and some parts of the IP take a port
number (as can be seen in the PSFP implementation).
Create a common helper that can be used outside of the TSN code for
retrieving the ENETC port number based on the PF number. This is only
correct for LS1028A, the only Linux-capable instantiation of ENETC thus
far.
Note that ENETC port 3 is PF 6. The TSN code did not care about this
because ENETC port 3 does not support TSN, so the wrong mapping done by
enetc_get_port for PF 6 could have never been hit.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix the following out-of-bounds warning:
net/ethtool/ioctl.c:492:2: warning: 'memcpy' offset [49, 84] from the object at 'link_usettings' is out of the bounds of referenced subobject 'base' with type 'struct ethtool_link_settings' at offset 0 [-Warray-bounds]
The problem is that the original code is trying to copy data into a
some struct members adjacent to each other in a single call to
memcpy(). This causes a legitimate compiler warning because memcpy()
overruns the length of &link_usettings.base. Fix this by directly
using &link_usettings and _from_ as destination and source addresses,
instead.
This helps with the ongoing efforts to globally enable -Warray-bounds
and get us closer to being able to tighten the FORTIFY_SOURCE routines
on memcpy().
Link: https://github.com/KSPP/linux/issues/109
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a VF driver for Microsoft Azure Network Adapter (MANA) that will be
available in the future.
Co-developed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Co-developed-by: Shachar Raindel <shacharr@microsoft.com>
Signed-off-by: Shachar Raindel <shacharr@microsoft.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel says:
====================
nexthop: Support large scale nexthop flushing
Patch #1 fixes a day-one bug in the nexthop code and allows "ip nexthop
flush" to work correctly with large number of nexthops that do not fit
in a single-part dump.
Patch #2 adds a test case.
Targeting at net-next since this use case never worked, the flow is
pretty obscure and such a large number of nexthops is unlikely to be
used in any real-world scenario.
Tested with fib_nexthops.sh:
Tests passed: 219
Tests failed: 0
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Test that all the nexthops are flushed when a multi-part nexthop dump is
required for the flushing.
Without previous patch:
# ./fib_nexthops.sh
TEST: Large scale nexthop flushing [FAIL]
With previous patch:
# ./fib_nexthops.sh
TEST: Large scale nexthop flushing [ OK ]
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, a multi-part nexthop dump is restarted based on the number of
nexthops that have been dumped so far. This can result in a lot of
nexthops not being dumped when nexthops are simultaneously deleted:
# ip nexthop | wc -l
65536
# ip nexthop flush
Dump was interrupted and may be inconsistent.
Flushed 36040 nexthops
# ip nexthop | wc -l
29496
Instead, restart the dump based on the nexthop identifier (fixed number)
of the last successfully dumped nexthop:
# ip nexthop | wc -l
65536
# ip nexthop flush
Dump was interrupted and may be inconsistent.
Flushed 65536 nexthops
# ip nexthop | wc -l
0
Reported-by: Maksym Yaremchuk <maksymy@nvidia.com>
Tested-by: Maksym Yaremchuk <maksymy@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Second set of patches for v5.13. A lot of iwlwifi and mt76 patches
this time, and also smaller features and fixes all over.
mt76
* mt7915/mt7615 decapsulation offload support
* threaded NAPI support
* new device IDs
* mt7921 device reset support
* rx timestamp support
iwlwifi
* passive scan support for 6GHz
* new hardware support
wilc1000
* CRC support for SPI bus
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJge+xHAAoJEG4XJFUm622b3+MH/RLorFA9iU+jdbq9nA1a9f/K
roiB9+lJogZKdy0rphF3d+/ItOPe1CZ791HP0GRRA3SsE+jO3LAxzEWvh27k7NoB
G3gdGSXtMkUY70Fab89QG8pyn07/R/403gr6H6sxMYg3Y/2gUHUbCqPN2N4DXw0/
2MVtxvrV4WERxirChJV3uzord8BGce1H69S6+jVLQiuoJM1PZZVr6vw+OSw7qntL
Zc2fMjBlBulU2R3EFiOkm08PwM8mJRB8JJiQ8vnB2nMeKpFOnCgm3Hozly7q/zCB
xCWlZcKBPYhtCRLoipvWnTt0SopZXyqslJbBBqlFVUkjPdrLqBBcVv3j5K7OZd4=
=DVDR
-----END PGP SIGNATURE-----
Merge tag 'wireless-drivers-next-2021-04-18' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next
Kalle Valo says:
====================
wireless-drivers-next patches for v5.13
Second set of patches for v5.13. A lot of iwlwifi and mt76 patches
this time, and also smaller features and fixes all over.
mt76
* mt7915/mt7615 decapsulation offload support
* threaded NAPI support
* new device IDs
* mt7921 device reset support
* rx timestamp support
iwlwifi
* passive scan support for 6GHz
* new hardware support
wilc1000
* CRC support for SPI bus
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add CFO tracking, which stands for central frequency offset tracking, to
adjust oscillator to align central frequency of connected AP. Then, it can
yield better performance.
Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210416030901.7099-1-pkshih@realtek.com
After the fix from Jiri that disabled local IRQs instead of
just BHs (necessary to fix an issue with submitting a command
with IRQs already disabled), there was still a situation in
which we could deep in there enable BHs, if the device config
sets the apmg_wake_up_wa configuration, which is true on all
7000 series devices.
To fix that, but not require reverting commit 1ed08f6fb5
("iwlwifi: remove flags argument for nic_access"), split up
nic access into a version with BH manipulation to use most
of the time, and without it for this specific case where the
local IRQs are already disabled.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210415164821.d0f2edda1651.I75f762e0bed38914d1300ea198b86dd449b4b206@changeid
Fix the following clang warning:
drivers/bcma/driver_mips.c:55:20: warning: unused function
'mips_write32' [-Wunused-function].
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1618382354-866-1-git-send-email-jiapeng.chong@linux.alibaba.com
In mwl8k_probe_hw, hw->priv->txq is freed at the first time by
dma_free_coherent() in the call chain:
if(!priv->ap_fw)->mwl8k_init_txqs(hw)->mwl8k_txq_init(hw, i).
Then in err_free_queues of mwl8k_probe_hw, hw->priv->txq is freed
at the second time by mwl8k_txq_deinit(hw, i)->dma_free_coherent().
My patch set txq->txd to NULL after the first free to avoid the
double free.
Fixes: a66098daac ("mwl8k: Marvell TOPDOG wireless driver")
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210402182627.4256-1-lyl2019@mail.ustc.edu.cn
Using a kernel with the Undefined Behaviour Sanity Checker (UBSAN) enabled, the
following array overrun is logged:
================================================================================
UBSAN: array-index-out-of-bounds in /home/finger/wireless-drivers-next/drivers/net/wireless/realtek/rtw88/phy.c:1789:34
index 5 is out of range for type 'u8 [5]'
CPU: 2 PID: 84 Comm: kworker/u16:3 Tainted: G O 5.12.0-rc5-00086-gd88bba47038e-dirty #651
Hardware name: TOSHIBA TECRA A50-A/TECRA A50-A, BIOS Version 4.50 09/29/2014
Workqueue: phy0 ieee80211_scan_work [mac80211]
Call Trace:
dump_stack+0x64/0x7c
ubsan_epilogue+0x5/0x40
__ubsan_handle_out_of_bounds.cold+0x43/0x48
rtw_get_tx_power_params+0x83a/drivers/net/wireless/realtek/rtw88/0xad0 [rtw_core]
? rtw_pci_read16+0x20/0x20 [rtw_pci]
? check_hw_ready+0x50/0x90 [rtw_core]
rtw_phy_get_tx_power_index+0x4d/0xd0 [rtw_core]
rtw_phy_set_tx_power_level+0xee/0x1b0 [rtw_core]
rtw_set_channel+0xab/0x110 [rtw_core]
rtw_ops_config+0x87/0xc0 [rtw_core]
ieee80211_hw_config+0x9d/0x130 [mac80211]
ieee80211_scan_state_set_channel+0x81/0x170 [mac80211]
ieee80211_scan_work+0x19f/0x2a0 [mac80211]
process_one_work+0x1dd/0x3a0
worker_thread+0x49/0x330
? rescuer_thread+0x3a0/0x3a0
kthread+0x134/0x150
? kthread_create_worker_on_cpu+0x70/0x70
ret_from_fork+0x22/0x30
================================================================================
The statement where an array is being overrun is shown in the following snippet:
if (rate <= DESC_RATE11M)
tx_power = pwr_idx_2g->cck_base[group];
else
====> tx_power = pwr_idx_2g->bw40_base[group];
The associated arrays are defined in main.h as follows:
struct rtw_2g_txpwr_idx {
u8 cck_base[6];
u8 bw40_base[5];
struct rtw_2g_1s_pwr_idx_diff ht_1s_diff;
struct rtw_2g_ns_pwr_idx_diff ht_2s_diff;
struct rtw_2g_ns_pwr_idx_diff ht_3s_diff;
struct rtw_2g_ns_pwr_idx_diff ht_4s_diff;
};
The problem arises because the value of group is 5 for channel 14. The trivial
increase in the dimension of bw40_base fails as this struct must match the layout of
efuse. The fix is to add the rate as an argument to rtw_get_channel_group() and set
the group for channel 14 to 4 if rate <= DESC_RATE11M.
This patch fixes commit fa6dfe6bff ("rtw88: resolve order of tx power setting routines")
Fixes: fa6dfe6bff ("rtw88: resolve order of tx power setting routines")
Reported-by: Богдан Пилипенко <bogdan.pylypenko107@gmail.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Cc: Stable <stable@vger.kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210401192717.28927-1-Larry.Finger@lwfinger.net
The rsi_resume() does access the bus to enable interrupts on the RSI
SDIO WiFi card, however when calling sdio_claim_host() in the resume
path, it is possible the bus is already claimed and sdio_claim_host()
spins indefinitelly. Enable the SDIO card interrupts in resume_noirq
instead to prevent anything else from claiming the SDIO bus first.
Fixes: 20db073327 ("rsi: sdio suspend and resume support")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Amitkumar Karwar <amit.karwar@redpinesignals.com>
Cc: Angus Ainslie <angus@akkea.ca>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Karun Eagalapati <karun256@gmail.com>
Cc: Martin Kepplinger <martink@posteo.de>
Cc: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Cc: Siva Rebbagondla <siva8118@gmail.com>
Cc: netdev@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210327235932.175896-1-marex@denx.de
Since firmware can't have proper statistics, driver update the statistics
periodically to firmware to assist in tuning performance.
Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210326092147.30252-1-pkshih@realtek.com
The opening comment mark '/**' is used for highlighting the beginning of
kernel-doc comments.
There are some files in drivers/net/wireless/rsi which follow this syntax
in their file headers, i.e. start with '/**' like comments, which causes
unexpected warnings from kernel-doc.
E.g., running scripts/kernel-doc -none on drivers/net/wireless/rsi/rsi_coex.h
causes this warning:
"warning: wrong kernel-doc identifier on line:
* Copyright (c) 2018 Redpine Signals Inc."
Similarly for other files too.
Provide a simple fix by replacing such occurrences with general comment
format, i.e., "/*", to prevent kernel-doc from parsing it.
Signed-off-by: Aditya Srivastava <yashsri421@gmail.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210315173259.8757-1-yashsri421@gmail.com
Currently, if the user changes the pause settings, the default settings
will be restored after an interface down/up cycle, and also when
resuming from suspend. This doesn't seem to provide the best user
experience. Change this to keep user settings, and just ensure that in
jumbo mode pause is disabled.
Small drawback: When switching back mtu from jumbo to non-jumbo then
pause remains disabled (but user can enable it using ethtool).
I think that's a not too common scenario and acceptable.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
- keep the ZC code, drop the code related to reinit
net/bridge/netfilter/ebtables.c
- fix build after move to net_generic
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
gcc-11 with KASAN on 32-bit arm produces a warning about a function
that needs a lot of stack space:
drivers/net/wireless/cisco/airo.c: In function 'setup_card.constprop':
drivers/net/wireless/cisco/airo.c:3960:1: error: the frame size of 1512 bytes is larger than 1400 bytes [-Werror=frame-larger-than=]
Most of this is from a single large structure that could be dynamically
allocated or moved into the per-device structure. However, as the callers
all seem to have a fairly well bounded call chain, the easiest change
is to pull out the part of the function that needs the large variables
into a separate function and mark that as noinline_for_stack. This does
not reduce the total stack usage, but it gets rid of the warning and
requires minimal changes otherwise.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210323131634.2669455-1-arnd@kernel.org
gcc complains about undefined behavior in calling snprintf()
with the same buffer as input and output:
drivers/net/wireless/ti/wl18xx/debugfs.c: In function 'diversity_num_of_packets_per_ant_read':
drivers/net/wireless/ti/wl18xx/../wlcore/debugfs.h:86:3: error: 'snprintf' argument 4 overlaps destination object 'buf' [-Werror=restrict]
86 | snprintf(buf, sizeof(buf), "%s[%d] = %d\n", \
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
87 | buf, i, stats->sub.name[i]); \
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/wireless/ti/wl18xx/debugfs.c:24:2: note: in expansion of macro 'DEBUGFS_FWSTATS_FILE_ARRAY'
24 | DEBUGFS_FWSTATS_FILE_ARRAY(a, b, c, wl18xx_acx_statistics)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/wireless/ti/wl18xx/debugfs.c:159:1: note: in expansion of macro 'WL18XX_DEBUGFS_FWSTATS_FILE_ARRAY'
159 | WL18XX_DEBUGFS_FWSTATS_FILE_ARRAY(diversity, num_of_packets_per_ant,
There are probably other ways of handling the debugfs file, without
using on-stack buffers, but a simple workaround here is to remember the
current position in the buffer and just keep printing in there.
Fixes: bcca1bbdd4 ("wlcore: add debugfs macro to help print fw statistics arrays")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210323125723.1961432-1-arnd@kernel.org
Building without mesh supports shows a couple of warnings with
'make W=1':
drivers/net/wireless/marvell/libertas/main.c: In function 'lbs_start_card':
drivers/net/wireless/marvell/libertas/main.c:1068:37: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body]
1068 | lbs_start_mesh(priv);
Change the macros to use the usual "do { } while (0)" instead to shut up
the warnings and make the code a litte more robust.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210322104343.948660-4-arnd@kernel.org
The 'c2hcmd_lock' spinlock is only used to protect some __skb_queue_tail()
and __skb_dequeue() calls.
Use the lock provided in the skb itself and call skb_queue_tail() and
skb_dequeue(). These functions already include the correct locking.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/8bcec6429615aeb498482dc7e1955ce09b456585.1617613700.git.christophe.jaillet@wanadoo.fr
If the loop fails, the "while(trials--) {" loop will exit with "trials"
set to -1. The test for that expects it to end with "trials" set to 0
so the warning message will not be printed.
Fix this by changing from a post-op to a pre-op. This does mean that
we only make 99 attempts instead of 100 but that's okay.
Fixes: f135a1571a ("wilc1000: Support chip sleep over SPI")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/YFS5gx/gi70zlIaO@mwanda
In preparation to enable -Wimplicit-fallthrough for Clang, fix
multiple warnings by replacing /* fall through */ comments with
the new pseudo-keyword macro fallthrough; instead of letting the
code fall through to the next case.
Notice that Clang doesn't recognize /* fall through */ comments as
implicit fall-through markings.
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210305094850.GA141221@embeddedor
Linux network drivers normally disallow changing the MAC address when
the interface is up. This driver has been different in that it allows
to change the MAC address *only* when it's up. This patch brings
wilc1000 behavior more in line with other network drivers. We could
have replaced wilc_set_mac_addr() with eth_mac_addr() but that would
break existing documentation on how to change the MAC address.
Likewise, return -EADDRNOTAVAIL (not -EINVAL) when the specified MAC
address is invalid or unavailable.
Signed-off-by: David Mosberger-Tang <davidm@egauge.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210303194846.1823596-1-davidm@egauge.net
The driver so far has always disabled CRC protection. This means any
data corruption that occurrs during the SPI transfers could go
undetected. This patch adds module parameters enable_crc7 and
enable_crc16 to selectively turn on CRC7 (for command transfers) and
CRC16 (for data transfers), respectively.
The default configuration remains unchanged, with both CRC7 and CRC16
off.
The performance impact of CRC was measured by running ttcp -t four
times in a row on a SAMA5 device:
CRC7 CRC16 Throughput: Standard deviation:
---- ----- ----------- -------------------
off off 1720 +/- 48 KB/s
on off 1658 +/- 58 KB/s
on on 1579 +/- 84 KB/s
Signed-off-by: David Mosberger-Tang <davidm@egauge.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210227172818.1711071-4-davidm@egauge.net
After a DMA write to the WILC chip, check for and report any errors.
This is based on code from the wilc driver in the linux-at91
repository.
Signed-off-by: David Mosberger-Tang <davidm@egauge.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210227172818.1711071-3-davidm@egauge.net
The WILC1000 protocol control register has bits for enabling the CRCs
(CRC7 for commands and CRC16 for data) and to set the data packet
size. Define symbolic names for those so the code is more easily
understood.
Signed-off-by: David Mosberger-Tang <davidm@egauge.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210227172818.1711071-2-davidm@egauge.net
For CMD_SINGLE_READ and CMD_INTERNAL_READ, WILC may insert one or more
zero bytes between the command response and the DATA Start tag (0xf3).
This behavior appears to be undocumented in "ATWILC1000 USER GUIDE"
(https://tinyurl.com/4hhshdts) but we have observed 1-4 zero bytes
when the SPI bus operates at 48MHz and none when it operates at 1MHz.
This code is derived from the equivalent code of the wilc driver in
the linux-at91 repository.
Signed-off-by: David Mosberger-Tang <davidm@egauge.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210227172818.1711071-1-davidm@egauge.net
There are a few reasons not to dump SSIDs as-is in kernel logs:
1) they're not guaranteed to be any particular text encoding (UTF-8,
ASCII, ...) in general
2) it's somewhat redundant; the BSSID should be enough to uniquely
identify the AP/STA to which we're connecting
3) BSSIDs have an easily-recognized format, whereas SSIDs do not (they
are free-form)
4) other common drivers (e.g., everything based on mac80211) get along
just fine by only including BSSIDs when logging state transitions
Additional notes on reason #3: this is important for the
privacy-conscious, especially when providing tools that convey
kernel logs on behalf of a user -- e.g., when reporting bugs. So for
example, it's easy to automatically filter logs for MAC addresses, but
it's much harder to filter SSIDs out of unstructured text.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210225024454.4106485-1-briannorris@chromium.org
The "ext->key_len" is a u16 that comes from the user. If it's over
SCM_KEY_LEN (32) that could lead to memory corruption.
Fixes: e0d369d1d9 ("[PATCH] ieee82011: Added WE-18 support to default wireless extension handler")
Cc: stable@vger.kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Stanislav Yakovlev <stas.yakovlev@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/YHaoA1i+8uT4ir4h@mwanda
spinlock can be initialized automatically with DEFINE_SPINLOCK()
rather than explicitly calling spin_lock_init().
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Guobin Huang <huangguobin4@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1617711406-49649-1-git-send-email-huangguobin4@huawei.com
some function's label meaningless, the label statement follows
the goto statement, no other statements, so just remove it.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: wengjianfeng <wengjianfeng@yulong.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210406025206.4924-1-samirweng1979@163.com
The 'c2hcmd_lock' spinlock is only used to protect some __skb_queue_tail()
and __skb_dequeue() calls.
Use the lock provided in the skb itself and call skb_queue_tail() and
skb_dequeue(). These functions already include the correct locking.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/99cf8894fd52202cb7ce2ec6e3200eef400bc071.1617609346.git.christophe.jaillet@wanadoo.fr
Assigning value "3" to "rtlpriv->btcoexist.reg_bt_sco" here, but that
stored value is overwritten before it can be used.
Coverity reports this problem as
CWE563: A value assigned to a variable is never used.
drivers/net/wireless/realtek/rtlwifi/rtl8188ee/hw.c:
rtl8188ee_bt_reg_init
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1617182023-110950-1-git-send-email-yang.lee@linux.alibaba.com
Variable err is assigned -ENODEV followed by an error return path
via label error_out that does not access the variable and returns
with the -ENODEV error return code. The assignment to err is
redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210327230014.25554-1-colin.king@canonical.com
some function's label meaningless, the return statement follows
the goto statement, so just remove it.
Signed-off-by: wengjianfeng <wengjianfeng@yulong.com>
Reviewed-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210223065754.34392-1-samirweng1979@163.com
The signal strength of 5G is quite low, so user can't connect to an AP far
away. New parameters with new format and its parser are updated by the commit
84d26fda52 ("rtlwifi: Update 8821ae new phy parameters and its parser."), but
some parameters are missing. Use this commit to update to the novel parameters
that use new format.
Fixes: 84d26fda52 ("rtlwifi: Update 8821ae new phy parameters and its parser")
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210219052607.7323-1-pkshih@realtek.com
