In case of error, the function devm_regmap_init_sdw_mbq() and
devm_regmap_init_sdw() returns ERR_PTR() not NULL. The NULL test
in the return value check should be replaced with IS_ERR().
Fixes: 393c52d2d109 ("ASoC: rt715-sdca: Add RT715 sdca vendor-specific driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20210309131458.1884899-1-weiyongjun1@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The PLL is only needed for sclk < 11289600 Hz and cs42l42_pll_config()
will not configure it for higher rates. So it must only be enabled
when it is needed.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210306185553.62053-15-tanureal@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There must be a delay of at least 150us after writing SCLK_PRESENT
before issuing another I2C write.
This is done using struct reg_sequence because it can specify a delay
after the write and the whole sequence is written atomically.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210306185553.62053-14-tanureal@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for reading the source clock from snd_soc_params_to_bclk
so the machine driver is not required to call cs42l42_set_sysclk
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210306185553.62053-13-tanureal@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Report the Jack events to the user space through ALSA.
Also moves request_threaded_irq() to component_probe so it don't get
interrupts before the initialization the struct snd_soc_jack.
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210306185553.62053-12-tanureal@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Asus T100HA and T101HA 2-in-1s use a rt5645 family codec and always
report that a headset (rather then headphones) are plugged in even when
regular headphones are plugged in.
And when a headset is used, then the headset-microphone does not work.
According to RealTek the ALC3270 variant used in these devices does not
support headsets only headphones.
Since the ALC3270 is a budget version of the regular ALC5645 codec,
I assume that it is using a package with less pins and the headset-mic
pin is simply not connected.
Detect if the codec is an ALC3270 based on the ACPI HID and if it is
an ALC3270 then always report SND_JACK_MICROPHONE as false, so that
userspace will not try to use the not-connected headset-mic.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210306230223.516566-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sound/soc/codecs/rt5645.c is the only user of the rt5645_platform_data,
move its definition to sound/soc/codecs/rt5645.c and remove the now
empty include/sound/rt5645.h file.
Note since the DMI quirk mechanism uses pointers to the
rt5645_platform_data struct we can NOT simply add its members to
the rt5645_priv struct and completely remove the struct.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210306230223.516566-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The function devm_platform_ioremap_resource has already contained
error message if failed, so remove superfluous dev_err here.
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20210307072133.10832-1-tangbin@cmss.chinamobile.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With S20_3LE format case, the sysclk = rate * 384,
the bclk = rate * 20 * 2, there is no proper bclk divider
for 384 / 40, because current condition needs exact match.
So driver fails to configure the clocking:
wm8962 3-001a: Unsupported BCLK ratio 9
Fix this by relaxing bitclk divider searching, so that when
no exact value can be derived from sysclk pick the closest
value greater than expected bitclk.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/1615170877-25918-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A previous cleanup commit removed the ininitialization of st2_mem_alloc.
Fix this by restoring the original behaviour by initializing it to zero.
Addresses-Coverity: ("Uninitialized scalar variable")
Fixes: e80382fe721f ("ASoC: fsl: fsl_easrc: remove useless assignments")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210303091835.5024-1-colin.king@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
./sound/soc/codecs/lpass-rx-macro.c:3588:3-8: No need to set .owner here.
The core will do it.
Remove .owner field if calls are used which set it automatically
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/1614762481-102466-1-git-send-email-yang.lee@linux.alibaba.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In case of error, the function devm_regmap_init_sdw() returns ERR_PTR()
and never returns NULL. The NULL test in the return value check should
be replaced with IS_ERR().
Fixes: a262057df513 ("ASoC: rt1316: Add RT1316 SDCA vendor-specific driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20210303064041.898281-1-weiyongjun1@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The function devm_platform_ioremap_resource has already contained
error message, so remove the redundant dev_err here.
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20210302135630.11456-1-tangbin@cmss.chinamobile.com
Signed-off-by: Mark Brown <broonie@kernel.org>
make W=1 warning:
sound/soc/qcom/qdsp6/q6afe.c:1460: warning: expecting prototype for
q6afe_dam_port_prepare(). Prototype was for
q6afe_cdc_dma_port_prepare() instead
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210302205926.49063-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
make W=1 warning:
sound/soc/intel/boards/bytcr_wm5102.c:216:40: error:
‘byt_wm5102_dai_params’ defined but not used
[-Werror=unused-const-variable=]
216 | static const struct snd_soc_pcm_stream byt_wm5102_dai_params = {
| ^~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210302205926.49063-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
make W=1 warning:
sound/soc/fsl/fsl_ssi.c:371: warning: expecting prototype for
fsl_ssi_irq(). Prototype was for fsl_ssi_isr() instead
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210302205926.49063-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
make W=1 warning:
sound/soc/amd/renoir/rn-pci-acp3x.c:24: warning: wrong kernel-doc
identifier on line:
* dmic_acpi_check = -1 - Use ACPI/DMI method to detect the DMIC
hardware presence at runtime
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210302205926.49063-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
make W=1 warning:
sound/soc/codecs/sigmadsp-regmap.c:42: warning: expecting prototype
for devm_sigmadsp_init_i2c(). Prototype was for
devm_sigmadsp_init_regmap() instead
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210302205926.49063-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
make W=1 warning:
sound/soc/codecs/rt5631.c:446: warning: expecting prototype for
onebit_depop_power_stage(). Prototype was for depop_seq_power_stage()
instead
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210302205926.49063-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
make W=1 warning:
sound/soc/codecs/jz4760.c: In function ‘jz4760_codec_startup’:
sound/soc/codecs/jz4760.c:201:6: error: variable ‘ret’ set but not
used [-Werror=unused-but-set-variable]
201 | int ret;
| ^~~
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210302205926.49063-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck complains about a possible null pointer dereference, but the
problem is rather an useless initialization before walking through a
list.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210302212527.55158-25-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warnings:
sound/soc/codecs/rt5682.c🔢6: style: Redundant initialization for
'idx'. The initialized value is overwritten before it is
read. [redundantInitialization]
idx = rt5682_div_sel(rt5682, dmic_clk_rate, div, ARRAY_SIZE(div));
^
sound/soc/codecs/rt5682.c:1228:10: note: idx is initialized
int idx = -EINVAL, dmic_clk_rate = 3072000;
^
sound/soc/codecs/rt5682.c🔢6: note: idx is overwritten
idx = rt5682_div_sel(rt5682, dmic_clk_rate, div, ARRAY_SIZE(div));
^
sound/soc/codecs/rt5682.c:1263:6: style: Redundant initialization for
'idx'. The initialized value is overwritten before it is
read. [redundantInitialization]
idx = rt5682_div_sel(rt5682, ref, div_f, ARRAY_SIZE(div_f));
^
sound/soc/codecs/rt5682.c:1248:25: note: idx is initialized
int ref, val, reg, idx = -EINVAL;
^
sound/soc/codecs/rt5682.c:1263:6: note: idx is overwritten
idx = rt5682_div_sel(rt5682, ref, div_f, ARRAY_SIZE(div_f));
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210302212527.55158-24-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/codecs/rt5682.c:2401:65: style: Boolean result is used in
bitwise operation. Clarify expression with
parentheses. [clarifyCondition]
(pll_code.m_bp ? 0 : pll_code.m_code) << RT5682_PLL_M_SFT |
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210302212527.55158-23-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/codecs/rt5677.c:5335:10: style: Variable 'ret' is assigned a
value that is never used. [unreadVariable]
int ret = 0, loop, i, reg_irq, virq;
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210302212527.55158-22-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/codecs/rt5677.c:4571:61: style: Boolean result is used in
bitwise operation. Clarify expression with
parentheses. [clarifyCondition]
(pll_code.m_bp ? 0 : pll_code.m_code) << RT5677_PLL_M_SFT |
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210302212527.55158-21-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/codecs/rt5670.c:2519:61: style: Boolean result is used in
bitwise operation. Clarify expression with
parentheses. [clarifyCondition]
(pll_code.m_bp ? 0 : pll_code.m_code) << RT5670_PLL_M_SFT |
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210302212527.55158-20-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warnings:
sound/soc/codecs/rt5668.c:1177:6: style: Redundant initialization for
'idx'. The initialized value is overwritten before it is
read. [redundantInitialization]
idx = rt5668_div_sel(rt5668, 1500000, div, ARRAY_SIZE(div));
^
sound/soc/codecs/rt5668.c:1174:10: note: idx is initialized
int idx = -EINVAL;
^
sound/soc/codecs/rt5668.c:1177:6: note: idx is overwritten
idx = rt5668_div_sel(rt5668, 1500000, div, ARRAY_SIZE(div));
^
sound/soc/codecs/rt5668.c:1202:6: style: Redundant initialization for
'idx'. The initialized value is overwritten before it is
read. [redundantInitialization]
idx = rt5668_div_sel(rt5668, ref, div, ARRAY_SIZE(div));
^
sound/soc/codecs/rt5668.c:1191:25: note: idx is initialized
int ref, val, reg, idx = -EINVAL;
^
sound/soc/codecs/rt5668.c:1202:6: note: idx is overwritten
idx = rt5668_div_sel(rt5668, ref, div, ARRAY_SIZE(div));
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210302212527.55158-19-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/codecs/rt5668.c:2185:61: style: Boolean result is used in
bitwise operation. Clarify expression with
parentheses. [clarifyCondition]
(pll_code.m_bp ? 0 : pll_code.m_code) << RT5668_PLL_M_SFT |
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210302212527.55158-18-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/codecs/rt5665.c:4388:61: style: Boolean result is used in
bitwise operation. Clarify expression with
parentheses. [clarifyCondition]
(pll_code.m_bp ? 0 : pll_code.m_code) << RT5665_PLL_M_SFT |
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210302212527.55158-17-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
bitwise operation. Clarify expression with
parentheses. [clarifyCondition]
(pll_code.m_bp ? 0 : pll_code.m_code) << RT5663_PLL_M_SHIFT |
^
sound/soc/codecs/rt5663.c:2955:63: style: Boolean result is used in
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210302212527.55158-16-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/codecs/rt5660.c:1060:61: style: Boolean result is used in
bitwise operation. Clarify expression with
parentheses. [clarifyCondition]
(pll_code.m_bp ? 0 : pll_code.m_code) << RT5660_PLL_M_SFT |
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210302212527.55158-15-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/codecs/rt5659.c:3515:61: style: Boolean result is used in
bitwise operation. Clarify expression with
parentheses. [clarifyCondition]
(pll_code.m_bp ? 0 : pll_code.m_code) << RT5659_PLL_M_SFT |
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210302212527.55158-14-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/codecs/rt5651.c:1786:13: style: Variable 'report' is
assigned a value that is never used. [unreadVariable]
int report = 0;
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210302212527.55158-13-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/codecs/rt5659.c:3515:61: style: Boolean result is used in
bitwise operation. Clarify expression with
parentheses. [clarifyCondition]
(pll_code.m_bp ? 0 : pll_code.m_code) << RT5659_PLL_M_SFT |
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210302212527.55158-12-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/codecs/rt5645.c:2959:61: style: Boolean result is used in
bitwise operation. Clarify expression with
parentheses. [clarifyCondition]
(pll_code.m_bp ? 0 : pll_code.m_code) << RT5645_PLL_M_SFT |
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210302212527.55158-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/codecs/rt5645.c:693:37: style:inconclusive: Boolean
expression 'reg>=420&®<=461' is used in bitwise operation. Did you
mean '||'? [bitwiseOnBoolean]
if ((reg >= 0x1a4 && reg <= 0x1cd) | (reg >= 0x1e5 && reg <= 0x1f8) |
^
sound/soc/codecs/rt5645.c:693:70: style:inconclusive: Boolean
expression 'reg==177' is used in bitwise operation. Did you mean '||'?
[bitwiseOnBoolean]
if ((reg >= 0x1a4 && reg <= 0x1cd) | (reg >= 0x1e5 && reg <= 0x1f8) |
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210302212527.55158-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/codecs/rt5640.c:1923:61: style: Boolean result is used in
bitwise operation. Clarify expression with
parentheses. [clarifyCondition]
(pll_code.m_bp ? 0 : pll_code.m_code) << RT5640_PLL_M_SFT |
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210302212527.55158-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/codecs/rt1308.c:676:40: style: Boolean result is used in
bitwise operation. Clarify expression with
parentheses. [clarifyCondition]
pll_code.k_code << RT1308_PLL1_K_SFT |
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210302212527.55158-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/codecs/rt1305.c:853:63: style: Boolean result is used in
bitwise operation. Clarify expression with
parentheses. [clarifyCondition]
(pll_code.m_bp ? 0 : pll_code.m_code) << RT1305_PLL_1_M_SFT |
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210302212527.55158-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/codecs/rt1016.c:503:61: style: Boolean result is used in
bitwise operation. Clarify expression with
parentheses. [clarifyCondition]
(pll_code.m_bp ? 0 : pll_code.m_code) << RT1016_PLL_M_SFT |
^
sound/soc/codecs/rt1016.c:506:40: style: Boolean result is used in
bitwise operation. Clarify expression with
parentheses. [clarifyCondition]
pll_code.k_bp << RT1016_PLL_K_BP_SFT |
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210302212527.55158-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/codecs/rt1015.c:894:61: style: Boolean result is used in
bitwise operation. Clarify expression with
parentheses. [clarifyCondition]
(pll_code.m_bp ? 0 : pll_code.m_code) << RT1015_PLL_M_SFT |
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210302212527.55158-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/codecs/rt1011.c:1781:63: style: Boolean result is used in
bitwise operation. Clarify expression with
parentheses. [clarifyCondition]
(pll_code.m_bp ? 0 : pll_code.m_code) << RT1011_PLL1_QM_SFT |
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210302212527.55158-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/codecs/rt1011.c:1994:6: style: Condition 'tx_slotnum' is
always true [knownConditionTrueFalse]
if (tx_slotnum)
^
sound/soc/codecs/rt1011.c:1895:24: note: Assuming that condition
'!tx_slotnum' is not redundant
if (tx_slotnum > 2 || !tx_slotnum) {
^
sound/soc/codecs/rt1011.c:1994:6: note: Condition 'tx_slotnum' is
always true
if (tx_slotnum)
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210302212527.55158-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove two machine descriptors which were added for development on
Intel RVPs but are no longer used or productized. This will not have
any impact on end-users. The corresponding cleanup was applied in the
SOF topologies.
Pierre-Louis Bossart (2):
ASoC: Intel: soc-acpi: remove unused TGL table with rt5682 only
ASoC: Intel: soc-acpi: remove TGL RVP mixed SoundWire/TDM config
.../intel/common/soc-acpi-intel-tgl-match.c | 23 -------------------
1 file changed, 23 deletions(-)
--
2.25.1
SAMA7G5 includes an updated version of I2S-MCC, found previously on
SAM9X60. This controller includes 8 data pins, 4 for playback and 4 for
capture. For I2S and LEFT_J formats, these pins can be used to
send/receive up to 8 audio channels. For DSP_A, with TDM, any pins pair
(DIN/DOUT) from these 4 can be selected to send/receive data. This
version also includes 2 FIFOs (send and receive).
This patch set starts by moving the driver's bindings to yaml and
continues with adding a new compatible for the SAMA7G5 variant, followed
by the changes needed for I2S/LEFT_J support, TDM pin pair selection and
FIFO support, exclusively for SAMA7G5.
Changes in v2:
- moved DT binding conversion patch from the beginning to the end of the
patch serieses
- patches that update the DT binding are modified to change .txt file
instead of .yaml
Codrin Ciubotariu (7):
dt-bindings: mchp,i2s-mcc: Add SAMA7G5 to binding
ASoC: mchp-i2s-mcc: Add compatible for SAMA7G5
ASoC: mchp-i2s-mcc: Add multi-channel support for I2S and LEFT_J
formats
dt-bindings: mchp,i2s-mcc: Add property to specify pin pair for TDM
ASoC: mchp-i2s-mcc: Add support to select TDM pins
ASoC: mchp-i2s-mcc: Add FIFOs support
ASoC: convert Microchip I2SMCC binding to yaml
.../bindings/sound/mchp,i2s-mcc.yaml | 108 ++++++++++++
.../bindings/sound/mchp-i2s-mcc.txt | 43 -----
sound/soc/atmel/Kconfig | 3 +
sound/soc/atmel/mchp-i2s-mcc.c | 161 +++++++++++++++---
4 files changed, 252 insertions(+), 63 deletions(-)
create mode 100644 Documentation/devicetree/bindings/sound/mchp,i2s-mcc.yaml
delete mode 100644 Documentation/devicetree/bindings/sound/mchp-i2s-mcc.txt
--
2.27.0
The skylake driver disabled async suspend to prevent disabling
the DSP before the card was suspended during system suspend.
This code was carried over to the SOF driver. But, there is no
risk of the DSP getting disabled before the card is suspended
with the SOF driver. Therefore, it is safe to enable async suspend
and thereby optimize the system resume time.
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20210301170157.36584-1-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On an imx8mq-evk the following error is seen:
[ 1.375809] wm8524-codec audio-codec: Failed to get mute line: -517
It happens because the codec driver may probe prior to the imx gpio
driver, which causes a probe defer.
Change to dev_err_probe() to avoid printing this error.
Reported-by: Chris Healy <cphealy@gmail.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20210301193328.2123511-1-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
v5.12-rc1 flags new warnings with make W=1, fix missing or broken
function descriptors.
sound/soc/intel/atom/sst/sst_loader.c:85: warning: expecting prototype
for sst_start_merrifield(). Prototype was for sst_start_mrfld()
instead
sound/soc/intel/atom/sst/sst_acpi.c:339: warning: expecting prototype
for intel_sst_remove(). Prototype was for sst_acpi_remove() instead
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210301165349.114952-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
v5.12-rc1 flags new warnings with make W=1, fix missing or broken
function descriptors.
sound/soc/soc-dai.c:167: warning: expecting prototype for
snd_soc_xlate_tdm_slot(). Prototype was for
snd_soc_xlate_tdm_slot_mask() instead
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210301174659.117122-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
v5.12-rc1 flags new warnings with make W=1, fix missing or broken
function descriptors.
sound/soc/codecs/nau8825.c:298: warning: wrong kernel-doc identifier
on line:
* Ramp up the headphone volume change gradually to target level.
sound/soc/codecs/nau8825.c:358: warning: expecting prototype for This
func(). Prototype was for nau8825_intlog10_dec3() instead
sound/soc/codecs/nau8825.c:411: warning: wrong kernel-doc identifier
on line:
* computes cross talk suppression sidetone gain.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210301174639.117017-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The TGL RVP can be configured in many ways. We initially supported a
mixed configuration with RT711 in SoundWire mode and RT1308 in
TDM mode.
However Intel teams no longer have any hardware with this
configuration and there are no commercially-available devices using it
either, so let's remove this entry. The corresponding topology will
also be removed from the SOF tree.
This patch partially reverts Commit d985d208bf ("ASoC: Intel: common: add match tables for TGL w/ SoundWire")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20210301235637.1177525-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch partially reverts Commit 095ee71907 ("ASoC: Intel: common: add match table for TGL RT5682 SoundWire driver").
This commit was added as an enabling patch before the Maxim98373 codec
driver was available. This codec is now fully functional and the
topology with only RT5682 no longer maintained or used.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20210301235637.1177525-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
I2S-MCC found on SAMA7G5 includes 2 FIFOs (capture and playback). When
FIFOs are enabled, bits I2SMCC_ISRA.TXLRDYx and I2SMCC_ISRA.TXRRDYx must
not be used. Bits I2SMCC_ISRB.TXFFRDY and I2SMCC_ISRB.RXFFRDY must be used
instead.
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lore.kernel.org/r/20210301170905.835091-7-codrin.ciubotariu@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
SAMA7G5's I2S-MCC has 4 pairs of DIN/DOUT pins. Since TDM only uses a
single pair of pins for synchronous capture and playback, the controller
needs to be told which of the pair is connected. This can be mentioned
using the "microchip,tdm-data-pair" property from DT. The property is
optional, useful only if TDM is used. If it's missing, DIN/DOUT 0 pins
will be used by default.
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lore.kernel.org/r/20210301170905.835091-6-codrin.ciubotariu@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The latest I2S-MCC available in SAMA7G5 supports multi-channel for I2S and
Left-Justified formats. For this, the new version uses 8 (4 * 2) input and
output pins, with each pin being responsible for 2 channels. This sums up
to a total of 8 channels for synchronous capture and playback.
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lore.kernel.org/r/20210301170905.835091-4-codrin.ciubotariu@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Microchip's new SAMA7G5 includes an updated I2S-MCC compatible with the
previous version found on SAM9X60. The new controller includes 8 (4 * 2)
input and output data pins for up to 8 channels for I2S and Left-Justified
formats.
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lore.kernel.org/r/20210301170905.835091-3-codrin.ciubotariu@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_dai_set_drvdata is not needed when the set data comes from
snd_soc_dai_get_drvdata or dev_get_drvdata.
---
sound/soc/fsl/fsl_micfil.c | 2 --
sound/soc/fsl/fsl_sai.c | 2 --
sound/soc/fsl/fsl_xcvr.c | 1 -
sound/soc/mxs/mxs-saif.c | 10 ----------
sound/soc/pxa/mmp-sspa.c | 1 -
sound/soc/sunxi/sun4i-i2s.c | 2 --
6 files changed, 18 deletions(-)
Constify a number of static structs that are never modified in RealTek
codecs. The most important patches are the first two, which constifies
snd_soc_dai_ops and sdw_slave_ops, both which contain function pointers.
The other two patches are for good measure, since I was already touching
the code there.
When doing this, I discovered sound/soc/codecs/rt1016.c is not in a
Makefile, so there is not really any way to build it (I added locally to
the Makefile to compile-test my changes). Is this expected or an oversight?
Rikard Falkeborn (4):
ASoC: rt*: Constify static struct sdw_slave_ops
ASoC: rt*: Constify static struct snd_soc_dai_ops
ASoC: rt*: Constify static struct acpi_device_id
ASoc: rt5631: Constify static struct coeff_clk_div
sound/soc/codecs/rt1011.c | 2 +-
sound/soc/codecs/rt1015.c | 4 ++--
sound/soc/codecs/rt1016.c | 4 ++--
sound/soc/codecs/rt1305.c | 2 +-
sound/soc/codecs/rt1308-sdw.c | 2 +-
sound/soc/codecs/rt1308.c | 2 +-
sound/soc/codecs/rt5631.c | 2 +-
sound/soc/codecs/rt5682-sdw.c | 4 ++--
sound/soc/codecs/rt700-sdw.c | 2 +-
sound/soc/codecs/rt700.c | 2 +-
sound/soc/codecs/rt711-sdw.c | 2 +-
sound/soc/codecs/rt711.c | 2 +-
sound/soc/codecs/rt715-sdw.c | 2 +-
sound/soc/codecs/rt715.c | 2 +-
14 files changed, 17 insertions(+), 17 deletions(-)
--
2.30.1
Skylake is dependent on SND_SOC_INTEL_SKYLAKE (aka "all SST platforms")
whereas selecting specific configuration such as KBL-only will not
cause driver code to compile. Switch to SND_SOC_INTEL_SKYLAKE_COMMON
dependency so selecting any configuration causes the driver to be built.
Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Suggested-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Fixes: 35bc99aaa1 ("ASoC: Intel: Skylake: Add more platform granularity")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20210125115441.10383-1-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move reset assert into runtime_resume since we
cannot rely on reset assert state when the device
is put out from suspend.
Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1613984990-5534-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Turn off display power at the end of controller resume flow. This is now
possible with the changes done in commit 87fc20e4a0 ("ASoC: SOF:
Intel: hda: use hdac_ext fine-grained link management"). As codec driver
is able to request the HDA link to be brought back up, the controller
no longer needs to blindly keep display power enabled.
Co-developed-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Keyon Jie <yang.jie@intel.com>
Link: https://lore.kernel.org/r/20210224141541.3331254-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently the return from snd_soc_dai_set_pll is not checking for
failure, this is the only driver in the kernel that ignores this,
so it probably should be added for sake of completeness. Fix this
by adding an error return check.
Addresses-Coverity: ("Unchecked return value")
Fixes: f139546fb7 ("ASoC: Intel: boards: sof-wm8804: support for Hifiberry Digiplus boards")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210226185653.1071321-1-colin.king@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The variable hph_pwr_mode is being initialized with a value that is
never read and it is being updated later with a new value. The
initialization is redundant and can be removed.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210215200501.90697-1-colin.king@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On SoCs such as i.MX7ULP, cpuidle has some levels which
may disable system/bus clocks, so need to add pm_qos to
prevent cpuidle from entering low level idles and make sure
system/bus clocks are enabled when sai is active.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1613983220-5373-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The pointer to of_phandle_args passed to snd_soc_get_dai_name() and
of_xlate_dai_name() implementations is not modified. Since it is being
used only to translate passed OF node to a DAI name, it should not be
modified, so mark it as const for correctness and safer code.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20210221153024.453583-1-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch cleanups below ppcheck warning.
sound/soc/sh/rcar/adg.c:67:9: style: The scope of the variable 'ratio' can be reduced. [variableScope]
int i, ratio;
^
sound/soc/sh/rcar/adg.c:114:6: style: The scope of the variable 'idx' can be reduced. [variableScope]
int idx, sel, div, step;
^
sound/soc/sh/rcar/adg.c:114:21: style: The scope of the variable 'step' can be reduced. [variableScope]
int idx, sel, div, step;
^
sound/soc/sh/rcar/adg.c:397:14: style: The scope of the variable 'clk' can be reduced. [variableScope]
struct clk *clk;
^
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87ft1lro24.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch cleanups below ppcheck warning.
sound/soc/sh/rcar/cmd.c:46:20: style: The scope of the variable 'src' can be reduced. [variableScope]
struct rsnd_mod *src;
^
sound/soc/sh/rcar/cmd.c:47:27: style: The scope of the variable 'tio' can be reduced. [variableScope]
struct rsnd_dai_stream *tio;
^
sound/soc/sh/rcar/cmd.c:145:13: style: The scope of the variable 'ret' can be reduced. [variableScope]
int i, nr, ret;
^
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87h7m1ro28.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch cleanups below ppcheck warning.
sound/soc/sh/rcar/core.c:233:26: style: The scope of the variable 'io' can be reduced. [variableScope]
struct rsnd_dai_stream *io;
^
sound/soc/sh/rcar/core.c:489:19: style: The scope of the variable 'mod' can be reduced. [variableScope]
struct rsnd_mod *mod;
^
sound/soc/sh/rcar/core.c:1064:9: style: The scope of the variable 'j' can be reduced. [variableScope]
int i, j;
^
sound/soc/sh/rcar/core.c:1143:19: style: The scope of the variable 'mod' can be reduced. [variableScope]
struct rsnd_mod *mod;
^
sound/soc/sh/rcar/core.c:1261:22: style: The scope of the variable 'playback' can be reduced. [variableScope]
struct device_node *playback, *capture;
^
sound/soc/sh/rcar/core.c:1261:33: style: The scope of the variable 'capture' can be reduced. [variableScope]
struct device_node *playback, *capture;
^
sound/soc/sh/rcar/core.c:1419:29: style: The scope of the variable 'be_params' can be reduced. [variableScope]
struct snd_pcm_hw_params *be_params;
^
sound/soc/sh/rcar/core.c:1369:22: style: Local variable 'rdai' shadows outer variable [shadowVariable]
struct rsnd_dai *rdai = rsnd_rdai_get(priv, dai_i);
^
sound/soc/sh/rcar/core.c:1338:19: note: Shadowed declaration
struct rsnd_dai *rdai;
^
sound/soc/sh/rcar/core.c:1369:22: note: Shadow variable
struct rsnd_dai *rdai = rsnd_rdai_get(priv, dai_i);
^
sound/soc/sh/rcar/core.c:1380:22: style: Local variable 'rdai' shadows outer variable [shadowVariable]
struct rsnd_dai *rdai = rsnd_rdai_get(priv, dai_i);
^
Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87im6hro2d.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch cleanups below ppcheck warning.
sound/soc/sh/rcar/ssi.c:170:19: style: The scope of the variable 'mod' can be reduced. [variableScope]
struct rsnd_mod *mod;
^
sound/soc/sh/rcar/ssi.c:535:6: style: The scope of the variable 'i' can be reduced. [variableScope]
int i;
^
sound/soc/sh/rcar/ssi.c:1212:19: style: The scope of the variable 'mod' can be reduced. [variableScope]
struct rsnd_mod *mod;
^
sound/soc/sh/rcar/ssi.c:328:16: portability: Shifting signed 32-bit value by 31 bits is implementation-defined behaviour [shiftTooManyBitsSigned]
ssi->cr_clk = FORCE | rsnd_rdai_width_to_swl(rdai) |
^
sound/soc/sh/rcar/ssi.c:387:12: portability: Shifting signed 32-bit value by 31 bits is implementation-defined behaviour [shiftTooManyBitsSigned]
cr_own |= FORCE | rsnd_rdai_width_to_swl(rdai);
^
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87k0qxro2j.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch cleanups below ppcheck warning.
sound/soc/sh/rcar/ssiu.c:212:10: style: The scope of the variable 'shift' can be reduced. [variableScope]
int i, shift;
^
sound/soc/sh/rcar/ssiu.c:337:19: style: The scope of the variable 'mod' can be reduced. [variableScope]
struct rsnd_mod *mod;
^
sound/soc/sh/rcar/ssiu.c:362:22: style: The scope of the variable 'np' can be reduced. [variableScope]
struct device_node *np;
^
sound/soc/sh/rcar/ssiu.c:363:19: style: The scope of the variable 'mod' can be reduced. [variableScope]
struct rsnd_mod *mod;
^
sound/soc/sh/rcar/ssiu.c:366:6: style: The scope of the variable 'i' can be reduced. [variableScope]
int i;
^
sound/soc/sh/rcar/ssiu.c:397:13: style: The scope of the variable 'ret' can be reduced. [variableScope]
int i, nr, ret;
^
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87lfbdro2p.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_dai_set_drvdata is not needed when the set data comes from
snd_soc_dai_get_drvdata or dev_get_drvdata. The problem was fixed
usingthe following semantic patch: (http://coccinelle.lip6.fr/)
// <smpl>
@@
expression x,y,e;
@@
x = dev_get_drvdata(y->dev)
... when != x = e
- snd_soc_dai_set_drvdata(y,x);
@@
expression x,y,e;
@@
x = snd_soc_dai_get_drvdata(y)
... when != x = e
- snd_soc_dai_set_drvdata(y,x);
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/20210213101907.1318496-5-Julia.Lawall@inria.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_dai_set_drvdata is not needed when the set data comes from
snd_soc_dai_get_drvdata or dev_get_drvdata. The problem was fixed
usingthe following semantic patch: (http://coccinelle.lip6.fr/)
// <smpl>
@@
expression x,y,e;
@@
x = dev_get_drvdata(y->dev)
... when != x = e
- snd_soc_dai_set_drvdata(y,x);
@@
expression x,y,e;
@@
x = snd_soc_dai_get_drvdata(y)
... when != x = e
- snd_soc_dai_set_drvdata(y,x);
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Link: https://lore.kernel.org/r/20210213101907.1318496-4-Julia.Lawall@inria.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_dai_set_drvdata is not needed when the set data comes from
snd_soc_dai_get_drvdata or dev_get_drvdata. The problem was fixed
usingthe following semantic patch: (http://coccinelle.lip6.fr/)
// <smpl>
@@
expression x,y,e;
@@
x = dev_get_drvdata(y->dev)
... when != x = e
- snd_soc_dai_set_drvdata(y,x);
@@
expression x,y,e;
@@
x = snd_soc_dai_get_drvdata(y)
... when != x = e
- snd_soc_dai_set_drvdata(y,x);
// </smpl>
In this case, the whole probe function then does nothing, so drop it.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Link: https://lore.kernel.org/r/20210213101907.1318496-3-Julia.Lawall@inria.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_dai_set_drvdata is not needed when the set data comes from
snd_soc_dai_get_drvdata or dev_get_drvdata. The problem was fixed
usingthe following semantic patch: (http://coccinelle.lip6.fr/)
// <smpl>
@@
expression x,y,e;
@@
x = dev_get_drvdata(y->dev)
... when != x = e
- snd_soc_dai_set_drvdata(y,x);
@@
expression x,y,e;
@@
x = snd_soc_dai_get_drvdata(y)
... when != x = e
- snd_soc_dai_set_drvdata(y,x);
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Link: https://lore.kernel.org/r/20210213101907.1318496-2-Julia.Lawall@inria.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/sh/siu_pcm.c:225:8: style: Variable 'virt' is assigned a
value that is never used. [unreadVariable]
virt = PERIOD_OFFSET(rt->dma_area,
^
It's not clear what this variable was needed for, remove it.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210219231635.5749-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/sh/siu_pcm.c:375:5: style: Redundant initialization for
'rt'. The initialized value is overwritten before it is
read. [redundantInitialization]
rt = siu_stream->substream->runtime;
^
sound/soc/sh/siu_pcm.c:366:30: note: rt is initialized
struct snd_pcm_runtime *rt = ss->runtime;
^
sound/soc/sh/siu_pcm.c:375:5: note: rt is overwritten
rt = siu_stream->substream->runtime;
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210219231635.5749-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/sh/rcar/ssi.c:403:6: style: Redundant initialization for
'wsr'. The initialized value is overwritten before it is
read. [redundantInitialization]
wsr = ssi->wsr;
^
sound/soc/sh/rcar/ssi.c:372:11: note: wsr is initialized
u32 wsr = ssi->wsr;
^
sound/soc/sh/rcar/ssi.c:403:6: note: wsr is overwritten
wsr = ssi->wsr;
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210219231635.5749-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/sh/rcar/ctu.c:212:6: style: Variable 'ret' is reassigned a
value before the old one has been used. [redundantAssignment]
ret = rsnd_kctrl_new_m(mod, io, rtd, "CTU SV0",
^
sound/soc/sh/rcar/ctu.c:205:6: note: ret is assigned
ret = rsnd_kctrl_new_m(mod, io, rtd, "CTU Pass",
^
sound/soc/sh/rcar/ctu.c:212:6: note: ret is overwritten
ret = rsnd_kctrl_new_m(mod, io, rtd, "CTU SV0",
^
All the kcontrol creations are checked for errors, except for one. Add
the missing error check.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210219231635.5749-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/sh/rcar/core.c:219:9: warning: Identical condition and
return expression 'ret', return value is always 0
[identicalConditionAfterEarlyExit]
return ret;
^
sound/soc/sh/rcar/core.c:210:6: note: If condition 'ret' is true, the
function will return/exit
if (ret)
^
sound/soc/sh/rcar/core.c:219:9: note: Returning identical expression
'ret'
return ret;
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210219231635.5749-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/generic/simple-card-utils.c:258:10: style: Variable 'ret' is
assigned a value that is never used. [unreadVariable]
int ret = 0;
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210218221921.88991-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/soc-pcm.c:1907:6: style: Variable 'err' is assigned a value
that is never used. [unreadVariable]
err = dpcm_be_dai_hw_free(fe, stream);
^
it's not clear why dpcm_be_dai_hw_free() is sometimes called without
testing the error status, and sometimes an error message is provided.
When in doubt, add an error message for consistency. This may have to
be revisited.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210218221921.88991-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/soc-pcm.c:2398:7: style: Variable 'ret' is reassigned a
value before the old one has been used. [redundantAssignment]
ret = -EINVAL;
^
sound/soc/soc-pcm.c:2395:7: note: ret is assigned
ret = -EINVAL;
^
sound/soc/soc-pcm.c:2398:7: note: ret is overwritten
ret = -EINVAL;
^
This looks like a copy/paste or git merge issue.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210218221921.88991-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/soc-ops.c:410:35: style: Variable 'val2' is assigned a value
that is never used. [unreadVariable]
unsigned int val, val_mask, val2 = 0;
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210218221921.88991-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/samsung/snow.c:112:2: style:inconclusive: Found duplicate
branches for 'if' and 'else'. [duplicateBranch]
if (rtd->num_codecs > 1)
^
sound/soc/samsung/snow.c:114:2: note: Found duplicate branches for
'if' and 'else'.
else
^
sound/soc/samsung/snow.c:112:2: note: Found duplicate branches for
'if' and 'else'.
if (rtd->num_codecs > 1)
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Fixes: 7de6b6bc1a ("ASoC: samsung: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointer")
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20210219230918.5058-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/samsung/smdk_wm8994.c:179:6: style: Variable 'ret' is
reassigned a value before the old one has been
used. [redundantAssignment]
ret = devm_snd_soc_register_card(&pdev->dev, card);
^
sound/soc/samsung/smdk_wm8994.c:166:8: note: ret is assigned
ret = -EINVAL;
^
sound/soc/samsung/smdk_wm8994.c:179:6: note: ret is overwritten
ret = devm_snd_soc_register_card(&pdev->dev, card);
^
The initial authors bothered to set ret to -EINVAL and throw a
dev_err() message, so it looks like there is a missing return to avoid
continuing if the property is missing.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20210219230918.5058-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/samsung/s3c24xx_simtec.c:191:7: style: Variable 'ret' is
assigned a value that is never used. [unreadVariable]
ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_PRESCALER,
^
Looking at the code, it's not clear why the return value is checked in
the two other cases but not here, so mirror the behavior and add a
check.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20210219230918.5058-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/samsung/i2s.c:1159:18: style: Variable 'dai' is not assigned
a value. [unassignedVariable]
struct i2s_dai *dai;
^
This variable is only used for a sizeof(*dai).
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20210219230918.5058-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
dpcm_fe_dai_startup() (= A) calls dpcm_set_fe_runtime() (= B) to setup
DPCM runtime. From *naming point of view*, it sounds like setup function
for FE.
(A) static int dpcm_fe_dai_startup(...)
{
...
(B) dpcm_set_fe_runtime(...);
...
}
But in dpcm_set_fe_runtime() (= B),
It setups FE by dpcm_runtime_setup_fe() (= X),
and setups BE by dpcm_runtime_merge_xxx() (= Y).
(B) static void dpcm_set_fe_runtime(...)
{
...
(X) dpcm_runtime_setup_fe(...);
^ dpcm_runtime_setup_be_format(...);
(Y) dpcm_runtime_setup_be_chan(...);
v dpcm_runtime_setup_be_rate(...);
}
These means that the function which is called as xxx_fe_xxx()
is setups both FE and BE. This is confusable and can be hot bed for bug.
Now dpcm_set_fe_runtime() (= B) is simple enough and confusable naming,
let's unpack it at dpcm_fe_dai_startup().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87mtvxvsgn.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
dpcm_fe_dai_startup() (= A) calls dpcm_set_fe_runtime() (= B) to setup
DPCM runtime. From *naming point of view*, it sounds like setup function
for FE.
(A) static int dpcm_fe_dai_startup(...)
{
...
(B) dpcm_set_fe_runtime(...);
...
}
But in dpcm_set_fe_runtime() (= B),
It setups FE by dpcm_runtime_setup_fe() (= X),
and setups BE by dpcm_runtime_merge_xxx() (= Y).
(B) static void dpcm_set_fe_runtime(...)
{
...
(X) dpcm_runtime_setup_fe(...);
^ dpcm_runtime_merge_format(...);
(Y) dpcm_runtime_merge_chan(...);
v dpcm_runtime_merge_rate(...);
}
These means that the function which is called as xxx_fe_xxx()
is setups both FE and BE. This is confusable and can be hot bed for bug.
This patch renames unclear dpcm_runtime_merge_xxx() (= Y) to
more clear dpcm_runtime_setup_be_xxx().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87o8gdvsgr.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
dpcm_fe_dai_startup() (= A) calls dpcm_set_fe_runtime() (= B) to setup
DPCM runtime. From *naming point of view*, it sounds like setup function
for FE.
(A) static int dpcm_fe_dai_startup(...)
{
...
(B) dpcm_set_fe_runtime(...);
...
}
But in dpcm_set_fe_runtime() (= B),
It setups FE by for_each loop (= X),
and setups BE by dpcm_runtime_merge_xxx() (= Y).
(B) static void dpcm_set_fe_runtime(...)
{
...
^ for_each_rtd_cpu_dais(...) {
| ...
(X) soc_pcm_hw_update_rate(...);
| soc_pcm_hw_update_chan(...);
| soc_pcm_hw_update_format(...);
v }
^ dpcm_runtime_merge_format(...);
(Y) dpcm_runtime_merge_chan(...);
v dpcm_runtime_merge_rate(...);
}
These means that the function which is called as xxx_fe_xxx()
is setups both FE and BE. This is confusable and can be hot bed for bug.
To tidyup it, as 1st step, this patch adds new dpcm_runtime_setup_fe()
for (X).
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87pn0tvsgx.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
dpcm_init_runtime_hw() (= A) is used from dpcm_set_fe_runtime() (= B)
with for_each_rtd_cpu_dais() loop (= C), and it checks formats (= D).
(A) static void dpcm_init_runtime_hw(...)
{
...
^ if (runtime->hw.formats)
| (D1) runtime->hw.formats &= stream->formats;
(D) else
| (D2) runtime->hw.formats = stream->formats;
v }
(B) static void dpcm_set_fe_runtime(...)
{
...
(C) for_each_rtd_cpu_dais(rtd, i, cpu_dai) {
...
(A) dpcm_init_runtime_hw(...);
}
}
If this for_each_rtd_cpu_dais() loop (= C) calls
dpcm_init_runtime_hw() (= A) multiple times, this means it is Multi-CPU.
If we focus to format operation at (D), using mask (= D1) is understandable
because it restricts unsupported format.
But, enabling format when zero format case (= D2) is very strange,
because it might enables unsupported format.
This runtime->hw.formats is initialized by ULLONG_MAX at soc_pcm_hw_init(),
thus becoming zero format means it can't use such format.
And doing this strange format operation is only here.
This patch removes strange format operation (= D2), and use standard
soc_pcm_hw_update_format() for it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87sg5pvshq.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/fsl/p1022_ds.c:344:6: style: Redundant initialization for
'ret'. The initialized value is overwritten before it is
read. [redundantInitialization]
ret = fsl_asoc_get_dma_channel(np, "fsl,playback-dma", &mdata->dai[0],
^
sound/soc/fsl/p1022_ds.c:203:10: note: ret is initialized
int ret = -ENODEV;
^
sound/soc/fsl/p1022_ds.c:344:6: note: ret is overwritten
ret = fsl_asoc_get_dma_channel(np, "fsl,playback-dma", &mdata->dai[0],
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210219232937.6440-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/fsl/mpc8610_hpcd.c:333:6: style: Redundant initialization
for 'ret'. The initialized value is overwritten before it is
read. [redundantInitialization]
ret = fsl_asoc_get_dma_channel(np, "fsl,playback-dma",
^
sound/soc/fsl/mpc8610_hpcd.c:193:10: note: ret is initialized
int ret = -ENODEV;
^
sound/soc/fsl/mpc8610_hpcd.c:333:6: note: ret is overwritten
ret = fsl_asoc_get_dma_channel(np, "fsl,playback-dma",
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210219232937.6440-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/fsl/mpc5200_dma.c:414:2: warning: %u in format
string (no. 1) requires 'unsigned int' but the argument type is
'signed int'. [invalidPrintfArgType_uint]
snprintf(psc_dma->name, sizeof psc_dma->name, "PSC%u", psc_dma->id);
^
Also fix sizeof use, missing parentheses reported by checkpatch.pl
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210219232937.6440-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/fsl/imx-hdmi.c:21:16: style: struct member
'cpu_priv::sysclk_freq' is never used. [unusedStructMember]
unsigned long sysclk_freq[2];
^
Additional checks show the sysclk_dir member is also not used.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210219232937.6440-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warnings:
sound/soc/fsl/fsl_ssi.c:767:34: style: Condition 'div2' is always
false [knownConditionTrueFalse]
stccr = SSI_SxCCR_PM(pm + 1) | (div2 ? SSI_SxCCR_DIV2 : 0) |
^
sound/soc/fsl/fsl_ssi.c:722:9: note: Assignment 'div2=0', assigned value is 0
div2 = 0;
^
sound/soc/fsl/fsl_ssi.c:767:34: note: Condition 'div2' is always false
stccr = SSI_SxCCR_PM(pm + 1) | (div2 ? SSI_SxCCR_DIV2 : 0) |
^
sound/soc/fsl/fsl_ssi.c:768:4: style: Condition 'psr' is always false
[knownConditionTrueFalse]
(psr ? SSI_SxCCR_PSR : 0);
^
sound/soc/fsl/fsl_ssi.c:721:8: note: Assignment 'psr=0', assigned
value is 0
psr = 0;
^
sound/soc/fsl/fsl_ssi.c:768:4: note: Condition 'psr' is always false
(psr ? SSI_SxCCR_PSR : 0);
^
Upon further analysis, the variables 'div2' and 'psr' are set to zero
and never modified. All the tests can be removed.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210219232937.6440-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warnings:
sound/soc/fsl/fsl_easrc.c:751:53: style: Variable 'st2_mem_alloc' is
assigned a value that is never used. [unreadVariable]
int st1_chanxexp, st1_mem_alloc = 0, st2_mem_alloc = 0;
^
sound/soc/fsl/fsl_easrc.c:1331:11: style: Variable 'size' is assigned
a value that is never used. [unreadVariable]
int size = 0;
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210219232937.6440-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/fsl/fsl_dma.c:411:10: style: Variable 'channel' is assigned
a value that is never used. [unreadVariable]
channel = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? 0 : 1;
^
Removing this line shows the variable isn't needed any longer so
remove declaration as well.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210219232937.6440-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/fsl/fsl_asrc.c:613:8: style: Variable 'i' is assigned a
value that is never used. [unreadVariable]
int i = 0, j = 0;
^
The same issue occurs for the 'j' variable.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210219232937.6440-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The only usage of them is to assign their address to the ops field in
the snd_soc_dai_driver struct, which is a pointer to const. Make them
const to allow the compiler to put them in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Link: https://lore.kernel.org/r/20210224211918.39109-3-rikard.falkeborn@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The only usage of these is to assign their address to the ops field in
the sdw_driver struct, which is a pointer to const. Make them const to
allow the compiler to put them in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Link: https://lore.kernel.org/r/20210224211918.39109-2-rikard.falkeborn@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/codecs/lpass-wsa-macro.c:958:6: style: Variable 'ret' is
reassigned a value before the old one has been
used. [redundantAssignment]
ret = wsa_macro_set_prim_interpolator_rate(dai, (u8) rate_val, sample_rate);
^
sound/soc/codecs/lpass-wsa-macro.c:946:6: note: ret is assigned
ret = wsa_macro_set_mix_interpolator_rate(dai, (u8) rate_val, sample_rate);
^
sound/soc/codecs/lpass-wsa-macro.c:958:6: note: ret is overwritten
ret = wsa_macro_set_prim_interpolator_rate(dai, (u8) rate_val, sample_rate);
^
set_mix_interpolator_rate can return -EINVAL, add a test and bail on error.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210218222916.89809-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warnings:
sound/soc/qcom/qdsp6/q6afe.c:848:25: note: Assignment 'p=NULL',
assigned value is 0
struct q6afe_port *p = NULL;
^
sound/soc/qcom/qdsp6/q6afe.c:854:7: note: Null pointer dereference
if (p->token == token) {
^
sound/soc/qcom/qdsp6/q6afe.c:939:8: style: Redundant initialization
for 'wait'. The initialized value is overwritten before it is
read. [redundantInitialization]
wait = &port->wait;
^
sound/soc/qcom/qdsp6/q6afe.c:933:26: note: wait is initialized
wait_queue_head_t *wait = &port->wait;
^
sound/soc/qcom/qdsp6/q6afe.c:939:8: note: wait is overwritten
wait = &port->wait;
^
sound/soc/qcom/qdsp6/q6afe.c:1191:10: style: Redundant initialization
for 'port_id'. The initialized value is overwritten before it is
read. [redundantInitialization]
port_id = port->id;
^
sound/soc/qcom/qdsp6/q6afe.c:1186:14: note: port_id is initialized
int port_id = port->id;
^
sound/soc/qcom/qdsp6/q6afe.c:1191:10: note: port_id is overwritten
port_id = port->id;
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210218222916.89809-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/qcom/lpass-platform.c:791:10: style: Variable 'ret' is
assigned a value that is never used. [unreadVariable]
int ret = -EINVAL;
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210218222916.89809-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/qcom/lpass-hdmi.c:189:9: warning: Identical condition and
return expression 'ret', return value is always 0
[identicalConditionAfterEarlyExit]
return ret;
^
sound/soc/qcom/lpass-hdmi.c:186:6: note: If condition 'ret' is true,
the function will return/exit
if (ret)
^
sound/soc/qcom/lpass-hdmi.c:189:9: note: Returning identical
expression 'ret'
return ret;
^
sound/soc/qcom/lpass-hdmi.c:206:9: warning: Identical condition and
return expression 'ret', return value is always 0
[identicalConditionAfterEarlyExit]
return ret;
^
sound/soc/qcom/lpass-hdmi.c:203:6: note: If condition 'ret' is true,
the function will return/exit
if (ret)
^
sound/soc/qcom/lpass-hdmi.c:206:9: note: Returning identical
expression 'ret'
return ret;
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210218222916.89809-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
During testing John Stultz and Amit reported few array our bound issues
after enabling bound sanitizer
This patch series attempts to fix those!
changes since v1:
- make sure the wcd is not de-referenced without intialization
Srinivas Kandagatla (3):
ASoC: qcom: sdm845: Fix array out of bounds access
ASoC: qcom: sdm845: Fix array out of range on rx slim channels
ASoC: codecs: wcd934x: add a sanity check in set channel map
sound/soc/codecs/wcd934x.c | 6 ++++++
sound/soc/qcom/sdm845.c | 6 +++---
2 files changed, 9 insertions(+), 3 deletions(-)
--
2.21.0
The ADSPCS_SPA is Set Power Active bit. To check if DSP is powered
down, we need to check ADSPCS_CPA, the Current Power Active bit.
Fixes: 747503b181 ("ASoC: SOF: Intel: Add Intel specific HDA DSP HW operations")
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pan Xiuli <xiuli.pan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210309004127.4940-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
set channel map can be passed with a channel maps, however if
the number of channels that are passed are more than the actual
supported channels then we would be accessing array out of bounds.
So add a sanity check to validate these numbers!
Fixes: a61f3b4f47 ("ASoC: wcd934x: add support to wcd9340/wcd9341 codec")
Reported-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210309142129.14182-4-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
WCD934x has only 13 RX SLIM ports however we are setting it as 16
in set_channel_map, this will lead to array out of bounds error!
Orignally caught by enabling USBAN array out of bounds check:
Fixes: 5caf64c633 ("ASoC: qcom: sdm845: add support to DB845c and Lenovo Yoga")
Reported-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210309142129.14182-3-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Static analysis Coverity had detected a potential array out-of-bounds
write issue due to the fact that MAX AFE port Id was set to 16 instead
of using AFE_PORT_MAX macro.
Fix this by properly using AFE_PORT_MAX macro.
Fixes: 1b93a88431 ("ASoC: qcom: sdm845: handle soundwire stream")
Reported-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210309142129.14182-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Hi All,
Here is a patch series for reporting to user space jack and button events and
add the support for Capture. With some cleanups and fixes along the way.
Regards,
Lucas Tanure
Lucas Tanure (12):
ASoC: cs42l42: Fix Bitclock polarity inversion
ASoC: cs42l42: Fix channel width support
ASoC: cs42l42: Fix mixer volume control
ASoC: cs42l42: Don't enable/disable regulator at Bias Level
ASoC: cs42l42: Always wait at least 3ms after reset
ASoC: cs42l42: Remove power if the driver is being removed
ASoC: cs42l42: Disable regulators if probe fails
ASoC: cs42l42: Provide finer control on playback path
ASoC: cs42l42: Set clock source for both ways of stream
ASoC: cs42l42: Add Capture Support
ASoC: cs42l42: Report jack and button detection
ASoC: cs42l42: Use bclk from hw_params if set_sysclk was not called
Richard Fitzgerald (3):
ASoC: cs42l42: Wait at least 150us after writing SCLK_PRESENT
ASoC: cs42l42: Only start PLL if it is needed
ASoC: cs42l42: Wait for PLL to lock before switching to it
sound/soc/codecs/cs42l42.c | 437 +++++++++++++++++++++----------------
sound/soc/codecs/cs42l42.h | 41 +++-
2 files changed, 282 insertions(+), 196 deletions(-)
--
2.30.1
In 61fbeb5 the sirf prima/atlas drivers were removed. This cleans
up a stray header and some Kconfig entries for the codec that
were missed in the process.
Fixes: 61fbeb5dcb (ASoC: remove sirf prima/atlas drivers)
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Mark Brown <broonie@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210307162338.1160604-1-pbrobinson@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Attempting to use the RX MIX path at 48kHz plays at 96kHz, because these
controls are incorrectly toggling the first bit of the register, which
is part of the FS_RATE field.
Fix the problem by using the same method used by the "WSA RX_MIX EC0_MUX"
control, which is to use SND_SOC_NOPM as the register and use an enum in
the shift field instead.
Fixes: 2c4066e5d4 ("ASoC: codecs: lpass-wsa-macro: add dapm widgets and route")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210305005049.24726-1-jonathan@marek.ca
Signed-off-by: Mark Brown <broonie@kernel.org>
An interface can have multiple decimators enabled, so loop over all active
decimators. Otherwise only one channel will be unmuted, and other channels
will be zero. This fixes recording from dual DMIC as a single two channel
stream.
Also remove the now unused "active_decimator" field.
Fixes: 908e6b1df2 ("ASoC: codecs: lpass-va-macro: Add support to VA Macro")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210304215646.17956-1-jonathan@marek.ca
Signed-off-by: Mark Brown <broonie@kernel.org>
This delay is part of the power-up sequence defined in the datasheet.
A runtime_resume is a power-up so must also include the delay.
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210305173442.195740-6-tanureal@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver was setting bit clock polarity opposite to intended polarity.
Also simplify the code by grouping ADC and DAC clock configurations into
a single field.
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210305173442.195740-2-tanureal@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Many systems do not use ACPI and hence do not provide a DMI table. On
non-ACPI systems a warning, such as the following, is printed on boot.
WARNING KERN tegra-audio-graph-card sound: ASoC: no DMI vendor name!
The variable 'dmi_available' is not exported and so currently cannot be
used by kernel modules without adding an accessor. However, it is
possible to use the function is_acpi_device_node() to determine if the
sound card is an ACPI device and hence indicate if we expect a DMI table
to be present. Therefore, call is_acpi_device_node() to see if we are
using ACPI and only parse the DMI table if we are booting with ACPI.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20210303115526.419458-1-jonathanh@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We only unregister the platform device during the .remove operation,
but if the probe fails we will never reach this sequence.
Suggested-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Fixes: dd96daca6c ("ASoC: SOF: Intel: Add APL/CNL HW DSP support")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20210302003410.1178535-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Hi All,
Here is a series of rt5640/rt5651 volume-control fixes which I wrote
while working on a bytcr-rt5640 UCM profile patch-series adding
hardware-volume control to devices using this UCM profile.
The UCM series will also work on older kernels, but it works best on
kernels with this series applied, giving e.g. finer grained volume
control and support for hardware muting the outputs.
Regards,
Hans
Hans de Goede (5):
ASoC: rt5640: Fix dac- and adc- vol-tlv values being off by a factor
of 10
ASoC: rt5651: Fix dac- and adc- vol-tlv values being off by a factor
of 10
ASoC: rt5640: Add emulated 'DAC1 Playback Switch' control
ASoC: rt5640: Rename 'Mono DAC Playback Volume' to 'DAC2 Playback
Volume'
ASoC: Intel: bytcr_rt5640: Add used AIF to the components string
sound/soc/codecs/rt5640.c | 106 +++++++++++++++++++++++---
sound/soc/codecs/rt5640.h | 4 +
sound/soc/codecs/rt5651.c | 4 +-
sound/soc/intel/boards/bytcr_rt5640.c | 11 ++-
4 files changed, 111 insertions(+), 14 deletions(-)
--
2.30.1
Most steps in this table are steps of 3dB (300 centi-dB), so we can
simplify the table.
This not only reduces the amount of space it takes inside the kernel,
this also makes alsa-lib's mixer code actually accept the table, where
as before this change alsa-lib saw the "ADC PGA Gain" control as a
control without a dB scale.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210228160441.241110-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
According to the SGTL5000 datasheet [1], the DAP_AVC_CTRL register has
the following bit field definitions:
| BITS | FIELD | RW | RESET | DEFINITION |
| 15 | RSVD | RO | 0x0 | Reserved |
| 14 | RSVD | RW | 0x1 | Reserved |
| 13:12 | MAX_GAIN | RW | 0x1 | Max Gain of AVC in expander mode |
| 11:10 | RSVD | RO | 0x0 | Reserved |
| 9:8 | LBI_RESP | RW | 0x1 | Integrator Response |
| 7:6 | RSVD | RO | 0x0 | Reserved |
| 5 | HARD_LMT_EN | RW | 0x0 | Enable hard limiter mode |
| 4:1 | RSVD | RO | 0x0 | Reserved |
| 0 | EN | RW | 0x0 | Enable/Disable AVC |
The original default value written to the DAP_AVC_CTRL register during
sgtl5000_i2c_probe() was 0x0510. This would incorrectly write values to
bits 4 and 10, which are defined as RESERVED. It would also not set
bits 12 and 14 to their correct RESET values of 0x1, and instead set
them to 0x0. While the DAP_AVC module is effectively disabled because
the EN bit is 0, this default value is still writing invalid values to
registers that are marked as read-only and RESERVED as well as not
setting bits 12 and 14 to their correct default values as defined by the
datasheet.
The correct value that should be written to the DAP_AVC_CTRL register is
0x5100, which configures the register bits to the default values defined
by the datasheet, and prevents any writes to bits defined as
'read-only'. Generally speaking, it is best practice to NOT attempt to
write values to registers/bits defined as RESERVED, as it generally
produces unwanted/undefined behavior, or errors.
Also, all credit for this patch should go to my colleague Dan MacDonald
<dmacdonald@curbellmedical.com> for finding this error in the first
place.
[1] https://www.nxp.com/docs/en/data-sheet/SGTL5000.pdf
Signed-off-by: Benjamin Rood <benjaminjrood@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20210219183308.GA2117@ubuntu-dev
Signed-off-by: Mark Brown <broonie@kernel.org>
The adc_vol_tlv volume-control has a range from -17.625 dB to +30 dB,
not -176.25 dB to + 300 dB. This wrong scale is esp. a problem in userspace
apps which translate the dB scale to a linear scale. With the logarithmic
dB scale being of by a factor of 10 we loose all precision in the lower
area of the range when apps translate things to a linear scale.
E.g. the 0 dB default, which corresponds with a value of 47 of the
0 - 127 range for the control, would be shown as 0/100 in alsa-mixer.
Since the centi-dB values used in the TLV struct cannot represent the
0.375 dB step size used by these controls, change the TLV definition
for them to specify a min and max value instead of min + stepsize.
Note this mirrors commit 3f31f7d9b5 ("ASoC: rt5670: Fix dac- and adc-
vol-tlv values being off by a factor of 10") which made the exact same
change to the rt5670 codec driver.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210226143817.84287-3-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The adc_vol_tlv volume-control has a range from -17.625 dB to +30 dB,
not -176.25 dB to + 300 dB. This wrong scale is esp. a problem in userspace
apps which translate the dB scale to a linear scale. With the logarithmic
dB scale being of by a factor of 10 we loose all precision in the lower
area of the range when apps translate things to a linear scale.
E.g. the 0 dB default, which corresponds with a value of 47 of the
0 - 127 range for the control, would be shown as 0/100 in alsa-mixer.
Since the centi-dB values used in the TLV struct cannot represent the
0.375 dB step size used by these controls, change the TLV definition
for them to specify a min and max value instead of min + stepsize.
Note this mirrors commit 3f31f7d9b5 ("ASoC: rt5670: Fix dac- and adc-
vol-tlv values being off by a factor of 10") which made the exact same
change to the rt5670 codec driver.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210226143817.84287-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When I added the quirk for the "HP Pavilion x2 10-p0XX" I copied the
byt_rt5640_quirk_table[] entry for the HP Pavilion x2 10-k0XX / 10-n0XX
models since these use almost the same settings.
While doing this I accidentally also copied and kept the non-standard
OVCD_TH_1500UA setting used on those models. This too low threshold is
causing headsets to often be seen as headphones (without a headset-mic)
and when correctly identified it is causing ghost play/pause
button-presses to get detected.
Correct the HP Pavilion x2 10-p0XX quirk to use the default OVCD_TH_2000UA
setting, fixing these problems.
Fixes: fbdae7d6d0 ("ASoC: Intel: bytcr_rt5640: Fix HP Pavilion x2 Detachable quirks")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210224105052.42116-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Hi All,
While working on adding hardware-volume control support to the UCM
profile for the rt5672 and on adding LED trigger support to the
rt5670 codec driver. I hit / noticed a couple of issues this series
fixes these issues.
Regards,
Hans
Hans de Goede (4):
ASoC: rt5670: Remove 'OUT Channel Switch' control
ASoC: rt5670: Remove 'HP Playback Switch' control
ASoC: rt5670: Remove ADC vol-ctrl mute bits poking from Sto1 ADC mixer
settings
ASoC: rt5670: Add emulated 'DAC1 Playback Switch' control
sound/soc/codecs/rt5670.c | 110 +++++++++++++++++++++++++++++++++-----
sound/soc/codecs/rt5670.h | 9 ++--
2 files changed, 101 insertions(+), 18 deletions(-)
--
2.30.1
Add missed MODULE_DEVICE_TABLE for the driver can be loaded
automatically at boot.
Fixes: 9208847774 ("ASoC: ak5558: Add support for AK5558 ADC driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1614149872-25510-2-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add missed MODULE_DEVICE_TABLE for the driver can be loaded
automatically at boot.
Fixes: 08660086ef ("ASoC: ak4458: Add support for AK4458 DAC driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1614149872-25510-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For reliable output-mute LED control we need a "DAC1 Playback Switch"
control. The "DAC Playback volume" control is the only control in the
path from the DAC1 data input to the speaker output, so the UCM profile
for the speaker output will have its PlaybackMixerElem set to "DAC1".
But userspace (pulseaudio) will set the "DAC1 Playback Volume" control to
its softest setting (which is not fully muted) while still showing the
speaker as being enabled at a low volume in the UI.
If we were to set the SNDRV_CTL_ELEM_ACCESS_SPK_LED on the "DAC1 Playback
Volume" control, this would mean then what pressing KEY_VOLUMEDOWN the
speaker-mute LED (embedded in the volume-mute toggle key) would light
while the UI is still showing the speaker as being enabled at a low
volume, meaning that the UI and the LED are out of sync.
Only after an _extra_ KEY_VOLUMEDOWN press would the UI show the
speaker as being muted.
The path from DAC1 data input to the speaker output does have
a digital mixer with DAC1's data as one of its inputs direclty after
the "DAC1 Playback Volume" control.
This commit adds an emulated "DAC1 Playback Switch" control by:
1. Declaring the enable flag for that mixers DAC1 input as well as the
"DAC1 Playback Switch" control both as SND_SOC_NOPM controls.
2. Storing the settings of both controls as driver-private data
3. Only clearing the mute flag for the DAC1 input of that mixer if the
stored values indicate both controls are enabled.
This is a preparation patch for adding "audio-mute" LED trigger support.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210215142118.308516-5-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The SND_SOC_DAPM_MIXER declaration for "Sto1 ADC MIXL" and "Sto1 ADC MIXR"
was using the mute bits from the RT5670_STO1_ADC_DIG_VOL control as mixer
master mute bits.
But these bits are already exposed to userspace as controls as part of the
"ADC Capture Volume" / "ADC Capture Switch" control pair:
SOC_DOUBLE("ADC Capture Switch", RT5670_STO1_ADC_DIG_VOL,
RT5670_L_MUTE_SFT, RT5670_R_MUTE_SFT, 1, 1),
SOC_DOUBLE_TLV("ADC Capture Volume", RT5670_STO1_ADC_DIG_VOL,
RT5670_L_VOL_SFT, RT5670_R_VOL_SFT,
127, 0, adc_vol_tlv),
Both the fact that the mute bits belong to the same reg as the vol-ctrl
and the "Digital Mixer Path" diagram in the datasheet clearly shows that
these mute bits are not part of the mixer and having 2 separate controls
poking at the same bits is a bad idea.
Remove the master-mute bits settings from the "Sto1 ADC MIXL" and
"Sto1 ADC MIXR" DAPM widget declarations, avoiding these bits getting
poked from 2 different places.
This should not cause any issues for userspace. AFAICT the rt567x codecs
are only used on x86/ACPI devices and the UCM profiles used there already
set the "ADC Capture Switch" as needed.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210215142118.308516-4-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The RT5670_L_MUTE_SFT and RT5670_R_MUTE_SFT bits (bits 15 and 7) of the
RT5670_HP_VOL register are set / unset by the headphones deplop code
run by rt5670_hp_event() on SND_SOC_DAPM_POST_PMU / SND_SOC_DAPM_PRE_PMD.
So we should not also export a control to userspace which toggles these
same bits.
This should not cause any issues for userspace. AFAICT the rt567x codecs
are only used on x86/ACPI devices and the UCM profiles used there do not
use the "HP Playback Switch" control.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210215142118.308516-3-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The "OUT Channel Switch" control is a left over from code copied from
thr rt5640 codec driver.
With the rt5640 codec driver the output volume controls have 2 pairs of
mute bits:
bit 7, 15: Mute Control for Spk/Headphone/Line Output Port
bit 6, 14: Mute Control for Spk/Headphone/Line Volume Channel
Bits 7 and 15 are normal mute bits on the rt5670/5672 which are
controlled by 2 dapm widgets:
SND_SOC_DAPM_SWITCH("LOUT L Playback", SND_SOC_NOPM, 0, 0,
&lout_l_enable_control),
SND_SOC_DAPM_SWITCH("LOUT R Playback", SND_SOC_NOPM, 0, 0,
&lout_r_enable_control),
But on the 5670/5672 bit 6 is always reserved, where as bit 14 is
"LOUT Differential Mode" on the 5670 and also reserved on the 5672.
So the "OUT Channel Switch" control which is controlling bits 6+14
of the "LINE Output Control" register is bogus -> remove it.
This should not cause any issues for userspace. AFAICT the rt567x codecs
are only used on x86/ACPI devices and the UCM profiles used there do not
use the "OUT Channel Switch" control.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210215142118.308516-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When using the driver in I2S TDM mode, the _fsl_ssi_set_dai_fmt()
function rewrites the number of slots previously set by the
fsl_ssi_set_dai_tdm_slot() function to 2 by default.
To fix this, let's use the saved slot count value or, if TDM
is not used and the slot count is not set, proceed as before.
Fixes: 4f14f5c11d ("ASoC: fsl_ssi: Fix number of words per frame for I2S-slave mode")
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/20210216114221.26635-1-shc_work@mail.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
There is potential read of the uninitialized variable ec_tx if the call
to snd_soc_component_read fails or returns an unrecognized w->name. To
avoid this corner case, initialize ec_tx to -1 so that it is caught
later when ec_tx is bounds checked.
Addresses-Coverity: ("Uninitialized scalar variable")
Fixes: 4f692926f5 ("ASoC: codecs: lpass-rx-macro: add dapm widgets and route")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210215163313.84026-1-colin.king@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ACPI scan capabilities is called from the intel-dspconfig as well
as the SOF/HDaudio drivers. This creates dependencies and randconfig issues
when HDaudio and SOF/SoundWire are not all configured as modules.
To simplify Kconfig dependencies between HDAudio, SoundWire, SOF and
intel-dspconfig, move the ACPI scan helpers to a dedicated
module. This follows the same idea as NHLT helpers which are already
handled as a dedicated module.
The only functional change is that the kernel parameter to filter
links is now handled by a different module, but that was only provided
for developers needing work-arounds for early BIOS releases.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210302003125.1178419-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Kconfig file is way too convoluted. Track platforms where
SoundWire is supported, and add simpler conditions to make sure there
is no module/built-in issue.
The use of 'depends on' is less intuitive if a required 'depend' is
missing, but that's a small price to pay for clarity and simplicity.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210302003125.1178419-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There is no reason why we should call the intel_dspcfg helpers from
common code, this should be moved in Intel-specific code and only
called from platforms where a conflict may occur with the HDaudio or
SST/Skylake driver.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210302003125.1178419-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Move PCI IDs and device-specific definitions out of common code. No
functionality change for now, just code split and removal of
IF_ENABLED() which made the configurations too complicated in case of
reuse of IP across generations.
Additional changes to address the DSP_CONFIG case and SoundWire
depends/select confusions are provided in follow-up patches.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210302003125.1178419-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The SOF-ACPI driver is backwards from the normal Linux model, it has a
generic driver that knows about all the specific drivers, as opposed to
having hardware specific drivers that link against a common framework.
This requires ugly Kconfig magic and leads to missed dependencies as
seen in this link error:
arm-linux-gnueabi-ld: sound/soc/sof/sof-pci-dev.o: in function `sof_acpi_probe':
sof-pci-dev.c:(.text+0x1c): undefined reference to `snd_intel_dsp_driver_probe'
Change it to use the normal probe order of starting with a specific
device in a driver, turning the sof-acpi-dev.c driver into a
library (exported symbols are name-spaced to avoid symbol pollution).
For backwards-compatibility with previous Kconfigs, the default values
for platform drivers uses the top-level ACPI configurations. The
modules were also renamed to allow for gradual transitions in test
scripts.
Co-developed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210302003125.1178419-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Another quiet release in terms of features, though several of the
drivers got quite a bit of work and there were a lot of general changes
resulting from Morimoto-san's ongoing cleanup work.
- As ever, lots of hard work by Morimoto-san cleaning up the code and
making it more consistent.
- Many improvements in the Intel drivers including a wide range of
quirks and bug fixes.
- A KUnit testsuite for the topology code.
- Support for Ingenic JZ4760(B), Intel AlderLake-P, DT configured
nVidia cards, Qualcomm lpass-rx-macro and lpass-tx-macro
- Removal of obsolete SIRF prima/atlas, Txx9 and ZTE zx drivers.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmAtZ7cACgkQJNaLcl1U
h9DD5Af/eeERQ2uVOqtw0If+XL1xRYe6RewgDoNcO/l/5WxBLrBH6NbEf0OwNJeg
vzZAkUBtxmx6XiW2M/h+4ucW1OPcg5IzxIWTHfGDMlKIxzb0jgWugRnJ7sdTnOs3
c+QHnvuOT7QzZBviAIkc5uZ5thAImYF8zDyKoGF5llztmnBYymtgpnvnRNZGM0ou
76oUzSvkCFI2b0Yf6bpGok2nBVlOu82HSHOUKjXVWk+LAeiivlYGOEZpdIKEe3S8
u6atQJ29XRr52Yuc2z4xnFQTW1cIDlwj2Fk5x/z8hX+5nRhNSGuIv1l5m7TfBj3e
mCO9cltKZxly0NXysgekn95JHwwwkA==
=MJSb
-----END PGP SIGNATURE-----
Merge tag 'asoc-v5.12' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v5.12
Another quiet release in terms of features, though several of the
drivers got quite a bit of work and there were a lot of general changes
resulting from Morimoto-san's ongoing cleanup work.
- As ever, lots of hard work by Morimoto-san cleaning up the code and
making it more consistent.
- Many improvements in the Intel drivers including a wide range of
quirks and bug fixes.
- A KUnit testsuite for the topology code.
- Support for Ingenic JZ4760(B), Intel AlderLake-P, DT configured
nVidia cards, Qualcomm lpass-rx-macro and lpass-tx-macro
- Removal of obsolete SIRF prima/atlas, Txx9 and ZTE zx drivers.
Hi All,
Here is a patch series adding quirks with device-specific settings for
4 more tablet / 2-in-1 models.
Regards,
Hans
Hans de Goede (4):
ASoC: Intel: bytcr_rt5640: Add quirk for the Estar Beauty HD MID 7316R tablet
ASoC: Intel: bytcr_rt5640: Add quirk for the Voyo Winpad A15 tablet
ASoC: Intel: bytcr_rt5651: Add quirk for the Jumper EZpad 7 tablet
ASoC: Intel: bytcr_rt5640: Add quirk for the Acer One S1002 tablet
sound/soc/intel/boards/bytcr_rt5640.c | 37 +++++++++++++++++++++++++++
sound/soc/intel/boards/bytcr_rt5651.c | 13 ++++++++++
2 files changed, 50 insertions(+)
--
2.30.1
In case DPCM runtime has multiple CPU DAIs, dpcm_init_runtime_hw() is
called multiple times, once for each CPU DAI. This will lead to
ignoring hw limits of all but the last DAI.
Fix this by moving soc_pcm_hw_init() up by one level to
dpcm_init_runtime_hw().
Fixes: 140f553d12 ("ASoC: soc-pcm: fix hwparams min/max init for dpcm")
Suggested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210216172251.3023723-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Acer One S1002 tablet is using an analog mic on IN1 and has
its jack-detect connected to JD2_IN4N, instead of using the default
IN3 for its internal mic and JD1_IN4P for jack-detect.
Note it is also using AIF2 instead of AIF1 which is somewhat unusual,
this is correctly advertised in the ACPI CHAN package, so the speakers
do work without the quirk.
Add a quirk for the mic and jack-detect settings.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210216213555.36555-5-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a DMI quirk for the Jumper EZpad 7 tablet, this tablet has
a jack-detect switch which reads 1/high when a jack is inserted,
rather then using the standard active-low setup which most
jack-detect switches use. All other settings are using the defaults.
Add a DMI-quirk setting the defaults + the BYT_RT5651_JD_NOT_INV
flags for this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210216213555.36555-4-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Voyo Winpad A15 tablet uses a Bay Trail (non CR) SoC, so it is using
SSP2 (AIF1) and it mostly works with the defaults. But instead of using
DMIC1 it is using an analog mic on IN1, add a quirk for this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210216213555.36555-3-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Estar Beauty HD MID 7316R tablet almost fully works with out default
settings. The only problem is that it has only 1 speaker so any sounds
only playing on the right channel get lost.
Add a quirk for this model using the default settings + MONO_SPEAKER.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210216213555.36555-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When runtime is initialized with dpcm_init_runtime_hw(), some of the
min/max calculations assume that defaults are set. For example
calculation of channel min/max values may be done using zero-initialized
data and soc_pcm_hw_update_chan() will always return max-channels of 0
in this case. This will result in failure to open the PCM at all.
Fix the issue by calling soc_pcm_hw_init() before calling any
soc_pcm_hw_update_*() functions.
Remove the conditional code on runtime->hw.formats as this field
is anyways set in soc_pcm_hw_init().
Fixes: 6cb56a4549 ("ASoC: soc-pcm: add soc_pcm_hw_update_chan()")
Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210214220414.2876690-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have soc_pcm_hw_update_xxx() now.
This patch creates same function for format.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/87pn1g90oa.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have soc_pcm_hw_update_rate() now.
This patch creates same function for chan.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/87r1lw90oo.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To update hw, we need to follow setting order
1) set hw->rates
2) call snd_pcm_limit_hw_rates()
3) update hw->rate_min/max
To avoid random settings, this patch adds new soc_pcm_hw_update_rate()
and share updating code.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/87sg6c90qv.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This callback structure has never been used and it is not clear why it
was added in the first place. Remove it to clear up the code a little.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210211172106.16258-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With recent SOF 1.7 pre-releases, kernel has been emitting following
warnings at probe:
[10006.645216] sof-audio-pci 0000:00:1f.3: warn: FW ABI is more recent than kernel
[10006.652137] sof-audio-pci 0000:00:1f.3: warn: topology ABI is more recent than kernel
The warnings are emitted due to increase of the patch-level in firmware
mainline (to 3.17.1). But the patch level should not be considered even
in the strict ABI check, so modify the kernel side logic that makes the
check and only consider the major.minor components.
BugLink: https://github.com/thesofproject/linux/issues/2647
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20210211172440.2371447-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It is recommended to not specifiy clocks property in an endpoint subnode.
This series moves clocks to device node.
However after moving the clocks to device node, the audio playback or
capture fails. The specified clock is not actually getting enabled and
hence the failure is seen. There seems to be a bug in simple-card-utils.c
where clock handle is not assigned when parsing clocks from device node.
Fix the same and revert original change which actually added clocks
property in endpoint subnode. Also update Jetson AGX Xavier DT where the
usage is found.
Sameer Pujar (3):
ASoC: simple-card-utils: Fix device module clock
Revert "ASoC: audio-graph-card: Add clocks property to endpoint node"
arm64: tegra: Move clocks from RT5658 endpoint to device node
.../devicetree/bindings/sound/audio-graph-port.yaml | 3 ---
arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts | 2 +-
sound/soc/generic/simple-card-utils.c | 13 ++++++-------
3 files changed, 7 insertions(+), 11 deletions(-)
--
2.7.4
Qualcomm LPASS (Low Power Audio SubSystem) has internal codec
TX macro block which is used for connecting with external
Soundwire TX Codecs like WCD938x.
This patch adds support to the codec part of the TX Macro block
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210211122735.5691-7-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
